1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2006 Marcel Moolenaar 5 * Copyright (c) 2001 M. Warner Losh 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/bus.h> 35 #include <sys/conf.h> 36 #include <sys/kernel.h> 37 #include <sys/module.h> 38 #include <machine/bus.h> 39 #include <sys/rman.h> 40 #include <machine/resource.h> 41 42 #include <dev/pci/pcivar.h> 43 44 #include <dev/uart/uart.h> 45 #include <dev/uart/uart_bus.h> 46 47 #define DEFAULT_RCLK 1843200 48 49 static int uart_pci_probe(device_t dev); 50 static int uart_pci_attach(device_t dev); 51 static int uart_pci_detach(device_t dev); 52 53 static device_method_t uart_pci_methods[] = { 54 /* Device interface */ 55 DEVMETHOD(device_probe, uart_pci_probe), 56 DEVMETHOD(device_attach, uart_pci_attach), 57 DEVMETHOD(device_detach, uart_pci_detach), 58 DEVMETHOD(device_resume, uart_bus_resume), 59 DEVMETHOD_END 60 }; 61 62 static driver_t uart_pci_driver = { 63 uart_driver_name, 64 uart_pci_methods, 65 sizeof(struct uart_softc), 66 }; 67 68 struct pci_id { 69 uint16_t vendor; 70 uint16_t device; 71 uint16_t subven; 72 uint16_t subdev; 73 const char *desc; 74 int rid; 75 int rclk; 76 int regshft; 77 }; 78 79 static const struct pci_id pci_ns8250_ids[] = { 80 { 0x1028, 0x0008, 0xffff, 0, "Dell Remote Access Card III", 0x14, 81 128 * DEFAULT_RCLK }, 82 { 0x1028, 0x0012, 0xffff, 0, "Dell RAC 4 Daughter Card Virtual UART", 0x14, 83 128 * DEFAULT_RCLK }, 84 { 0x1033, 0x0074, 0x1033, 0x8014, "NEC RCV56ACF 56k Voice Modem", 0x10 }, 85 { 0x1033, 0x007d, 0x1033, 0x8012, "NEC RS232C", 0x10 }, 86 { 0x103c, 0x1048, 0x103c, 0x1227, "HP Diva Serial [GSP] UART - Powerbar SP2", 87 0x10 }, 88 { 0x103c, 0x1048, 0x103c, 0x1301, "HP Diva RMP3", 0x14 }, 89 { 0x103c, 0x1290, 0xffff, 0, "HP Auxiliary Diva Serial Port", 0x18 }, 90 { 0x103c, 0x3301, 0xffff, 0, "HP iLO serial port", 0x10 }, 91 { 0x11c1, 0x0480, 0xffff, 0, "Agere Systems Venus Modem (V90, 56KFlex)", 0x14 }, 92 { 0x115d, 0x0103, 0xffff, 0, "Xircom Cardbus Ethernet + 56k Modem", 0x10 }, 93 { 0x125b, 0x9100, 0xa000, 0x1000, 94 "ASIX AX99100 PCIe 1/2/3/4-port RS-232/422/485", 0x10 }, 95 { 0x1282, 0x6585, 0xffff, 0, "Davicom 56PDV PCI Modem", 0x10 }, 96 { 0x12b9, 0x1008, 0xffff, 0, "3Com 56K FaxModem Model 5610", 0x10 }, 97 { 0x131f, 0x1000, 0xffff, 0, "Siig CyberSerial (1-port) 16550", 0x18 }, 98 { 0x131f, 0x1001, 0xffff, 0, "Siig CyberSerial (1-port) 16650", 0x18 }, 99 { 0x131f, 0x1002, 0xffff, 0, "Siig CyberSerial (1-port) 16850", 0x18 }, 100 { 0x131f, 0x2000, 0xffff, 0, "Siig CyberSerial (1-port) 16550", 0x10 }, 101 { 0x131f, 0x2001, 0xffff, 0, "Siig CyberSerial (1-port) 16650", 0x10 }, 102 { 0x131f, 0x2002, 0xffff, 0, "Siig CyberSerial (1-port) 16850", 0x10 }, 103 { 0x135c, 0x0190, 0xffff, 0, "Quatech SSCLP-100", 0x18 }, 104 { 0x135c, 0x01c0, 0xffff, 0, "Quatech SSCLP-200/300", 0x18 }, 105 { 0x135e, 0x7101, 0xffff, 0, "Sealevel Systems Single Port RS-232/422/485/530", 106 0x18 }, 107 { 0x1407, 0x0110, 0xffff, 0, "Lava Computer mfg DSerial-PCI Port A", 0x10 }, 108 { 0x1407, 0x0111, 0xffff, 0, "Lava Computer mfg DSerial-PCI Port B", 0x10 }, 109 { 0x1407, 0x0510, 0xffff, 0, "Lava SP Serial 550 PCI", 0x10 }, 110 { 0x1409, 0x7168, 0x1409, 0x4025, "Timedia Technology Serial Port", 0x10, 111 8 * DEFAULT_RCLK }, 112 { 0x1409, 0x7168, 0x1409, 0x4027, "Timedia Technology Serial Port", 0x10, 113 8 * DEFAULT_RCLK }, 114 { 0x1409, 0x7168, 0x1409, 0x4028, "Timedia Technology Serial Port", 0x10, 115 8 * DEFAULT_RCLK }, 116 { 0x1409, 0x7168, 0x1409, 0x5025, "Timedia Technology Serial Port", 0x10, 117 8 * DEFAULT_RCLK }, 118 { 0x1409, 0x7168, 0x1409, 0x5027, "Timedia Technology Serial Port", 0x10, 119 8 * DEFAULT_RCLK }, 120 { 0x1415, 0x950b, 0xffff, 0, "Oxford Semiconductor OXCB950 Cardbus 16950 UART", 121 0x10, 16384000 }, 122 { 0x1415, 0xc120, 0xffff, 0, "Oxford Semiconductor OXPCIe952 PCIe 16950 UART", 123 0x10 }, 124 { 0x14e4, 0x160a, 0xffff, 0, "Broadcom TruManage UART", 0x10, 125 128 * DEFAULT_RCLK, 2}, 126 { 0x14e4, 0x4344, 0xffff, 0, "Sony Ericsson GC89 PC Card", 0x10}, 127 { 0x151f, 0x0000, 0xffff, 0, "TOPIC Semiconductor TP560 56k modem", 0x10 }, 128 { 0x1d0f, 0x8250, 0x0000, 0, "Amazon PCI serial device", 0x10 }, 129 { 0x1d0f, 0x8250, 0x1d0f, 0, "Amazon PCI serial device", 0x10 }, 130 { 0x1fd4, 0x1999, 0x1fd4, 0x0001, "Sunix SER5xxxx Serial Port", 0x10, 131 8 * DEFAULT_RCLK }, 132 { 0x8086, 0x0f0a, 0xffff, 0, "Intel ValleyView LPIO1 HSUART#1", 0x10, 133 24 * DEFAULT_RCLK, 2 }, 134 { 0x8086, 0x0f0c, 0xffff, 0, "Intel ValleyView LPIO1 HSUART#2", 0x10, 135 24 * DEFAULT_RCLK, 2 }, 136 { 0x8086, 0x108f, 0xffff, 0, "Intel AMT - SOL", 0x10 }, 137 { 0x8086, 0x1c3d, 0xffff, 0, "Intel AMT - KT Controller", 0x10 }, 138 { 0x8086, 0x1d3d, 0xffff, 0, "Intel C600/X79 Series Chipset KT Controller", 0x10 }, 139 { 0x8086, 0x1e3d, 0xffff, 0, "Intel Panther Point KT Controller", 0x10 }, 140 { 0x8086, 0x228a, 0xffff, 0, "Intel Cherryview SIO HSUART#1", 0x10, 141 24 * DEFAULT_RCLK, 2 }, 142 { 0x8086, 0x228c, 0xffff, 0, "Intel Cherryview SIO HSUART#2", 0x10, 143 24 * DEFAULT_RCLK, 2 }, 144 { 0x8086, 0x2a07, 0xffff, 0, "Intel AMT - PM965/GM965 KT Controller", 0x10 }, 145 { 0x8086, 0x2a47, 0xffff, 0, "Mobile 4 Series Chipset KT Controller", 0x10 }, 146 { 0x8086, 0x2e17, 0xffff, 0, "4 Series Chipset Serial KT Controller", 0x10 }, 147 { 0x8086, 0x3b67, 0xffff, 0, "5 Series/3400 Series Chipset KT Controller", 148 0x10 }, 149 { 0x8086, 0x8811, 0xffff, 0, "Intel EG20T Serial Port 0", 0x10 }, 150 { 0x8086, 0x8812, 0xffff, 0, "Intel EG20T Serial Port 1", 0x10 }, 151 { 0x8086, 0x8813, 0xffff, 0, "Intel EG20T Serial Port 2", 0x10 }, 152 { 0x8086, 0x8814, 0xffff, 0, "Intel EG20T Serial Port 3", 0x10 }, 153 { 0x8086, 0x8c3d, 0xffff, 0, "Intel Lynx Point KT Controller", 0x10 }, 154 { 0x8086, 0x8cbd, 0xffff, 0, "Intel Wildcat Point KT Controller", 0x10 }, 155 { 0x8086, 0x9c3d, 0xffff, 0, "Intel Lynx Point-LP HECI KT", 0x10 }, 156 { 0x9710, 0x9820, 0x1000, 1, "NetMos NM9820 Serial Port", 0x10 }, 157 { 0x9710, 0x9835, 0x1000, 1, "NetMos NM9835 Serial Port", 0x10 }, 158 { 0x9710, 0x9865, 0xa000, 0x1000, "NetMos NM9865 Serial Port", 0x10 }, 159 { 0x9710, 0x9900, 0xa000, 0x1000, 160 "MosChip MCS9900 PCIe to Peripheral Controller", 0x10 }, 161 { 0x9710, 0x9901, 0xa000, 0x1000, 162 "MosChip MCS9901 PCIe to Peripheral Controller", 0x10 }, 163 { 0x9710, 0x9904, 0xa000, 0x1000, 164 "MosChip MCS9904 PCIe to Peripheral Controller", 0x10 }, 165 { 0x9710, 0x9922, 0xa000, 0x1000, 166 "MosChip MCS9922 PCIe to Peripheral Controller", 0x10 }, 167 { 0xdeaf, 0x9051, 0xffff, 0, "Middle Digital PC Weasel Serial Port", 0x10 }, 168 { 0xffff, 0, 0xffff, 0, NULL, 0, 0} 169 }; 170 171 const static struct pci_id * 172 uart_pci_match(device_t dev, const struct pci_id *id) 173 { 174 uint16_t device, subdev, subven, vendor; 175 176 vendor = pci_get_vendor(dev); 177 device = pci_get_device(dev); 178 while (id->vendor != 0xffff && 179 (id->vendor != vendor || id->device != device)) 180 id++; 181 if (id->vendor == 0xffff) 182 return (NULL); 183 if (id->subven == 0xffff) 184 return (id); 185 subven = pci_get_subvendor(dev); 186 subdev = pci_get_subdevice(dev); 187 while (id->vendor == vendor && id->device == device && 188 (id->subven != subven || id->subdev != subdev)) 189 id++; 190 return ((id->vendor == vendor && id->device == device) ? id : NULL); 191 } 192 193 static int 194 uart_pci_probe(device_t dev) 195 { 196 struct uart_softc *sc; 197 const struct pci_id *id; 198 int result; 199 200 sc = device_get_softc(dev); 201 202 id = uart_pci_match(dev, pci_ns8250_ids); 203 if (id != NULL) { 204 sc->sc_class = &uart_ns8250_class; 205 goto match; 206 } 207 /* Add checks for non-ns8250 IDs here. */ 208 return (ENXIO); 209 210 match: 211 result = uart_bus_probe(dev, id->regshft, 0, id->rclk, id->rid, 0, 0); 212 /* Bail out on error. */ 213 if (result > 0) 214 return (result); 215 /* Set/override the device description. */ 216 if (id->desc) 217 device_set_desc(dev, id->desc); 218 return (result); 219 } 220 221 static int 222 uart_pci_attach(device_t dev) 223 { 224 struct uart_softc *sc; 225 int count; 226 227 sc = device_get_softc(dev); 228 229 /* 230 * Use MSI in preference to legacy IRQ if available. 231 * Whilst some PCIe UARTs support >1 MSI vector, use only the first. 232 */ 233 if (pci_msi_count(dev) > 0) { 234 count = 1; 235 if (pci_alloc_msi(dev, &count) == 0) { 236 sc->sc_irid = 1; 237 device_printf(dev, "Using %d MSI message\n", count); 238 } 239 } 240 241 return (uart_bus_attach(dev)); 242 } 243 244 static int 245 uart_pci_detach(device_t dev) 246 { 247 struct uart_softc *sc; 248 249 sc = device_get_softc(dev); 250 251 if (sc->sc_irid != 0) 252 pci_release_msi(dev); 253 254 return (uart_bus_detach(dev)); 255 } 256 257 DRIVER_MODULE(uart, pci, uart_pci_driver, uart_devclass, NULL, NULL); 258