1 /*- 2 * Copyright (c) 2003 Marcel Moolenaar 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 #ifndef _DEV_UART_BUS_H_ 30 #define _DEV_UART_BUS_H_ 31 32 #ifndef KLD_MODULE 33 #include "opt_uart.h" 34 #endif 35 36 #include <sys/serial.h> 37 #include <sys/timepps.h> 38 39 /* Drain and flush targets. */ 40 #define UART_DRAIN_RECEIVER 0x0001 41 #define UART_DRAIN_TRANSMITTER 0x0002 42 #define UART_FLUSH_RECEIVER UART_DRAIN_RECEIVER 43 #define UART_FLUSH_TRANSMITTER UART_DRAIN_TRANSMITTER 44 45 /* Received character status bits. */ 46 #define UART_STAT_BREAK 0x0100 47 #define UART_STAT_FRAMERR 0x0200 48 #define UART_STAT_OVERRUN 0x0400 49 #define UART_STAT_PARERR 0x0800 50 51 #ifdef UART_PPS_ON_CTS 52 #define UART_SIG_DPPS SER_DCTS 53 #define UART_SIG_PPS SER_CTS 54 #else 55 #define UART_SIG_DPPS SER_DDCD 56 #define UART_SIG_PPS SER_DCD 57 #endif 58 59 /* UART_IOCTL() requests */ 60 #define UART_IOCTL_BREAK 1 61 #define UART_IOCTL_IFLOW 2 62 #define UART_IOCTL_OFLOW 3 63 #define UART_IOCTL_BAUD 4 64 65 /* 66 * UART class & instance (=softc) 67 */ 68 struct uart_class { 69 KOBJ_CLASS_FIELDS; 70 struct uart_ops *uc_ops; /* Low-level console operations. */ 71 u_int uc_range; /* Bus space address range. */ 72 u_int uc_rclk; /* Default rclk for this device. */ 73 }; 74 75 struct uart_softc { 76 KOBJ_FIELDS; 77 struct uart_class *sc_class; 78 struct uart_bas sc_bas; 79 device_t sc_dev; 80 81 struct mtx sc_hwmtx_s; /* Spinlock protecting hardware. */ 82 struct mtx *sc_hwmtx; 83 84 struct resource *sc_rres; /* Register resource. */ 85 int sc_rrid; 86 int sc_rtype; /* SYS_RES_{IOPORT|MEMORY}. */ 87 struct resource *sc_ires; /* Interrupt resource. */ 88 void *sc_icookie; 89 int sc_irid; 90 91 int sc_callout:1; /* This UART is opened for callout. */ 92 int sc_fastintr:1; /* This UART uses fast interrupts. */ 93 int sc_hwiflow:1; /* This UART has HW input flow ctl. */ 94 int sc_hwoflow:1; /* This UART has HW output flow ctl. */ 95 int sc_leaving:1; /* This UART is going away. */ 96 int sc_opened:1; /* This UART is open for business. */ 97 int sc_polled:1; /* This UART has no interrupts. */ 98 int sc_txbusy:1; /* This UART is transmitting. */ 99 int sc_isquelch:1; /* This UART has input squelched. */ 100 101 struct uart_devinfo *sc_sysdev; /* System device (or NULL). */ 102 103 int sc_altbrk; /* State for alt break sequence. */ 104 uint32_t sc_hwsig; /* Signal state. Used by HW driver. */ 105 106 /* Receiver data. */ 107 uint16_t *sc_rxbuf; 108 int sc_rxbufsz; 109 int sc_rxput; 110 int sc_rxget; 111 int sc_rxfifosz; /* Size of RX FIFO. */ 112 113 /* Transmitter data. */ 114 uint8_t *sc_txbuf; 115 int sc_txdatasz; 116 int sc_txfifosz; /* Size of TX FIFO and buffer. */ 117 118 /* Pulse capturing support (PPS). */ 119 struct pps_state sc_pps; 120 121 /* Upper layer data. */ 122 void *sc_softih; 123 uint32_t sc_ttypend; 124 union { 125 /* TTY specific data. */ 126 struct { 127 struct tty *tp; 128 } u_tty; 129 /* Keyboard specific data. */ 130 struct { 131 } u_kbd; 132 } sc_u; 133 }; 134 135 extern devclass_t uart_devclass; 136 extern char uart_driver_name[]; 137 138 int uart_bus_attach(device_t dev); 139 int uart_bus_detach(device_t dev); 140 serdev_intr_t *uart_bus_ihand(device_t dev, int ipend); 141 int uart_bus_ipend(device_t dev); 142 int uart_bus_probe(device_t dev, int regshft, int rclk, int rid, int chan); 143 int uart_bus_sysdev(device_t dev); 144 145 void uart_sched_softih(struct uart_softc *, uint32_t); 146 147 int uart_tty_attach(struct uart_softc *); 148 int uart_tty_detach(struct uart_softc *); 149 void uart_tty_intr(void *arg); 150 151 /* 152 * Receive buffer operations. 153 */ 154 static __inline int 155 uart_rx_empty(struct uart_softc *sc) 156 { 157 return ((sc->sc_rxget == sc->sc_rxput) ? 1 : 0); 158 } 159 160 static __inline int 161 uart_rx_full(struct uart_softc *sc) 162 { 163 return ((sc->sc_rxput + 1 < sc->sc_rxbufsz) 164 ? (sc->sc_rxput + 1 == sc->sc_rxget) : (sc->sc_rxget == 0)); 165 } 166 167 static __inline int 168 uart_rx_get(struct uart_softc *sc) 169 { 170 int ptr, xc; 171 172 ptr = sc->sc_rxget; 173 if (ptr == sc->sc_rxput) 174 return (-1); 175 xc = sc->sc_rxbuf[ptr++]; 176 sc->sc_rxget = (ptr < sc->sc_rxbufsz) ? ptr : 0; 177 return (xc); 178 } 179 180 static __inline int 181 uart_rx_next(struct uart_softc *sc) 182 { 183 int ptr; 184 185 ptr = sc->sc_rxget; 186 if (ptr == sc->sc_rxput) 187 return (-1); 188 ptr += 1; 189 sc->sc_rxget = (ptr < sc->sc_rxbufsz) ? ptr : 0; 190 return (0); 191 } 192 193 static __inline int 194 uart_rx_peek(struct uart_softc *sc) 195 { 196 int ptr; 197 198 ptr = sc->sc_rxget; 199 return ((ptr == sc->sc_rxput) ? -1 : sc->sc_rxbuf[ptr]); 200 } 201 202 static __inline int 203 uart_rx_put(struct uart_softc *sc, int xc) 204 { 205 int ptr; 206 207 ptr = (sc->sc_rxput + 1 < sc->sc_rxbufsz) ? sc->sc_rxput + 1 : 0; 208 if (ptr == sc->sc_rxget) 209 return (ENOSPC); 210 sc->sc_rxbuf[sc->sc_rxput] = xc; 211 sc->sc_rxput = ptr; 212 return (0); 213 } 214 215 #endif /* _DEV_UART_BUS_H_ */ 216