xref: /freebsd/sys/dev/ti/if_tireg.h (revision fcb560670601b2a4d87bb31d7531c8dcc37ee71b)
1 /*-
2  * Copyright (c) 1997, 1998, 1999
3  *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by Bill Paul.
16  * 4. Neither the name of the author nor the names of any co-contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30  * THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  * $FreeBSD$
33  */
34 
35 /*
36  * Tigon register offsets. These are memory mapped registers
37  * which can be accessed with the CSR_READ_4()/CSR_WRITE_4() macros.
38  * Each register must be accessed using 32 bit operations.
39  *
40  * All reegisters are accessed through a 16K shared memory block.
41  * The first group of registers are actually copies of the PCI
42  * configuration space registers.
43  */
44 
45 #define TI_PCI_ID			0x000 /* PCI device/vendor ID */
46 #define TI_PCI_CMDSTAT			0x004
47 #define TI_PCI_CLASSCODE		0x008
48 #define TI_PCI_BIST			0x00C
49 #define TI_PCI_LOMEM			0x010 /* Shared memory base address */
50 #define TI_PCI_SUBSYS			0x02C
51 #define TI_PCI_ROMBASE			0x030
52 #define TI_PCI_INT			0x03C
53 
54 #ifndef PCIM_CMD_MWIEN
55 #define PCIM_CMD_MWIEN			0x0010
56 #endif
57 
58 /*
59  * Alteon AceNIC PCI vendor/device ID.
60  */
61 #define ALT_VENDORID			0x12AE
62 #define ALT_DEVICEID_ACENIC		0x0001
63 #define ALT_DEVICEID_ACENIC_COPPER	0x0002
64 
65 /*
66  * 3Com 3c985 PCI vendor/device ID.
67  */
68 #define TC_VENDORID			0x10B7
69 #define TC_DEVICEID_3C985		0x0001
70 
71 /*
72  * Netgear GA620 PCI vendor/device ID.
73  */
74 #define NG_VENDORID			0x1385
75 #define NG_DEVICEID_GA620		0x620A
76 #define NG_DEVICEID_GA620T		0x630A
77 
78 /*
79  * SGI device/vendor ID.
80  */
81 #define SGI_VENDORID			0x10A9
82 #define SGI_DEVICEID_TIGON		0x0009
83 
84 /*
85  * DEC vendor ID, Farallon device ID. Apparently, Farallon used
86  * the DEC vendor ID in their cards by mistake.
87  */
88 #define DEC_VENDORID			0x1011
89 #define DEC_DEVICEID_FARALLON_PN9000SX	0x001a
90 
91 /*
92  * Tigon configuration and control registers.
93  */
94 #define TI_MISC_HOST_CTL		0x040
95 #define TI_MISC_LOCAL_CTL		0x044
96 #define TI_SEM_AB			0x048 /* Tigon 2 only */
97 #define TI_MISC_CONF			0x050 /* Tigon 2 only */
98 #define TI_TIMER_BITS			0x054
99 #define TI_TIMERREF			0x058
100 #define TI_PCI_STATE			0x05C
101 #define TI_MAIN_EVENT_A			0x060
102 #define TI_MAILBOX_EVENT_A		0x064
103 #define TI_WINBASE			0x068
104 #define TI_WINDATA			0x06C
105 #define TI_MAIN_EVENT_B			0x070 /* Tigon 2 only */
106 #define TI_MAILBOX_EVENT_B		0x074 /* Tigon 2 only */
107 #define TI_TIMERREF_B			0x078 /* Tigon 2 only */
108 #define TI_SERIAL			0x07C
109 
110 /*
111  * Misc host control bits.
112  */
113 #define TI_MHC_INTSTATE			0x00000001
114 #define TI_MHC_CLEARINT			0x00000002
115 #define TI_MHC_RESET			0x00000008
116 #define TI_MHC_BYTE_SWAP_ENB		0x00000010
117 #define TI_MHC_WORD_SWAP_ENB		0x00000020
118 #define TI_MHC_MASK_INTS		0x00000040
119 #define TI_MHC_CHIP_REV_MASK		0xF0000000
120 
121 #define TI_MHC_BIGENDIAN_INIT	\
122 	(TI_MHC_BYTE_SWAP_ENB|TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT)
123 
124 #define TI_MHC_LITTLEENDIAN_INIT	\
125 	(TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT)
126 
127 /*
128  * Tigon chip rev values. Rev 4 is the Tigon 1. Rev 6 is the Tigon 2.
129  * Rev 5 is also the Tigon 2, but is a broken version which was never
130  * used in any actual hardware, so we ignore it.
131  */
132 #define TI_REV_TIGON_I			0x40000000
133 #define TI_REV_TIGON_II			0x60000000
134 
135 /*
136  * Firmware revision that we want.
137  */
138 #define TI_FIRMWARE_MAJOR		0xc
139 #define TI_FIRMWARE_MINOR		0x4
140 #define TI_FIRMWARE_FIX			0xb
141 
142 /*
143  * Miscelaneous Local Control register.
144  */
145 #define TI_MLC_EE_WRITE_ENB		0x00000010
146 #define TI_MLC_SRAM_BANK_SIZE		0x00000300 /* Tigon 2 only */
147 #define TI_MLC_LOCALADDR_21		0x00004000
148 #define TI_MLC_LOCALADDR_22		0x00008000
149 #define TI_MLC_SBUS_WRITEERR		0x00080000
150 #define TI_MLC_EE_CLK			0x00100000
151 #define TI_MLC_EE_TXEN			0x00200000
152 #define TI_MLC_EE_DOUT			0x00400000
153 #define TI_MLC_EE_DIN			0x00800000
154 
155 /* Possible memory sizes. */
156 #define TI_MLC_SRAM_BANK_DISA           0x00000000
157 #define TI_MLC_SRAM_BANK_1024K          0x00000100
158 #define TI_MLC_SRAM_BANK_512K           0x00000200
159 #define TI_MLC_SRAM_BANK_256K           0x00000300
160 
161 /*
162  * Offset of MAC address inside EEPROM.
163  */
164 #define TI_EE_MAC_OFFSET		0x8c
165 
166 #define TI_DMA_ASSIST			0x11C
167 #define TI_CPU_STATE			0x140
168 #define TI_CPU_PROGRAM_COUNTER		0x144
169 #define TI_SRAM_ADDR			0x154
170 #define TI_SRAM_DATA			0x158
171 #define TI_GEN_0			0x180
172 #define TI_GEN_X			0x1FC
173 #define TI_MAC_TX_STATE			0x200
174 #define TI_MAC_RX_STATE			0x220
175 #define TI_CPU_CTL_B			0x240 /* Tigon 2 only */
176 #define TI_CPU_PROGRAM_COUNTER_B	0x244 /* Tigon 2 only */
177 #define TI_SRAM_ADDR_B			0x254 /* Tigon 2 only */
178 #define TI_SRAM_DATA_B			0x258 /* Tigon 2 only */
179 #define TI_GEN_B_0			0x280 /* Tigon 2 only */
180 #define TI_GEN_B_X			0x2FC /* Tigon 2 only */
181 
182 /*
183  * Misc config register.
184  */
185 #define TI_MCR_SRAM_SYNCHRONOUS		0x00100000 /* Tigon 2 only */
186 
187 /*
188  * PCI state register.
189  */
190 #define TI_PCISTATE_FORCE_RESET		0x00000001
191 #define TI_PCISTATE_PROVIDE_LEN		0x00000002
192 #define TI_PCISTATE_READ_MAXDMA		0x0000001C
193 #define TI_PCISTATE_WRITE_MAXDMA	0x000000E0
194 #define TI_PCISTATE_MINDMA		0x0000FF00
195 #define TI_PCISTATE_FIFO_RETRY_ENB	0x00010000
196 #define TI_PCISTATE_USE_MEM_RD_MULT	0x00020000
197 #define TI_PCISTATE_NO_SWAP_READ_DMA	0x00040000
198 #define TI_PCISTATE_NO_SWAP_WRITE_DMA	0x00080000
199 #define TI_PCISTATE_66MHZ_BUS		0x00080000 /* Tigon 2 only */
200 #define TI_PCISTATE_32BIT_BUS		0x00100000 /* Tigon 2 only */
201 #define TI_PCISTATE_ENB_BYTE_ENABLES	0x00800000 /* Tigon 2 only */
202 #define TI_PCISTATE_READ_CMD		0x0F000000
203 #define TI_PCISTATE_WRITE_CMD		0xF0000000
204 
205 #define TI_PCI_READMAX_4		0x04
206 #define TI_PCI_READMAX_16		0x08
207 #define TI_PCI_READMAX_32		0x0C
208 #define TI_PCI_READMAX_64		0x10
209 #define TI_PCI_READMAX_128		0x14
210 #define TI_PCI_READMAX_256		0x18
211 #define TI_PCI_READMAX_1024		0x1C
212 
213 #define TI_PCI_WRITEMAX_4		0x20
214 #define TI_PCI_WRITEMAX_16		0x40
215 #define TI_PCI_WRITEMAX_32		0x60
216 #define TI_PCI_WRITEMAX_64		0x80
217 #define TI_PCI_WRITEMAX_128		0xA0
218 #define TI_PCI_WRITEMAX_256		0xC0
219 #define TI_PCI_WRITEMAX_1024		0xE0
220 
221 #define TI_PCI_READ_CMD			0x06000000
222 #define TI_PCI_WRITE_CMD		0x70000000
223 
224 /*
225  * DMA state register.
226  */
227 #define TI_DMASTATE_ENABLE		0x00000001
228 #define TI_DMASTATE_PAUSE		0x00000002
229 
230 /*
231  * CPU state register.
232  */
233 #define TI_CPUSTATE_RESET		0x00000001
234 #define TI_CPUSTATE_STEP		0x00000002
235 #define TI_CPUSTATE_ROMFAIL		0x00000010
236 #define TI_CPUSTATE_HALT		0x00010000
237 /*
238  * MAC TX state register
239  */
240 #define TI_TXSTATE_RESET		0x00000001
241 #define TI_TXSTATE_ENB			0x00000002
242 #define TI_TXSTATE_STOP			0x00000004
243 
244 /*
245  * MAC RX state register
246  */
247 #define TI_RXSTATE_RESET		0x00000001
248 #define TI_RXSTATE_ENB			0x00000002
249 #define TI_RXSTATE_STOP			0x00000004
250 
251 /*
252  * Tigon 2 mailbox registers. The mailbox area consists of 256 bytes
253  * split into 64 bit registers. Only the lower 32 bits of each mailbox
254  * are used.
255  */
256 #define TI_MB_HOSTINTR_HI		0x500
257 #define TI_MB_HOSTINTR_LO		0x504
258 #define TI_MB_HOSTINTR			TI_MB_HOSTINTR_LO
259 #define TI_MB_CMDPROD_IDX_HI		0x508
260 #define TI_MB_CMDPROD_IDX_LO		0x50C
261 #define TI_MB_CMDPROD_IDX		TI_MB_CMDPROD_IDX_LO
262 #define TI_MB_SENDPROD_IDX_HI		0x510
263 #define TI_MB_SENDPROD_IDX_LO		0x514
264 #define TI_MB_SENDPROD_IDX		TI_MB_SENDPROD_IDX_LO
265 #define TI_MB_STDRXPROD_IDX_HI		0x518 /* Tigon 2 only */
266 #define TI_MB_STDRXPROD_IDX_LO		0x51C /* Tigon 2 only */
267 #define TI_MB_STDRXPROD_IDX		TI_MB_STDRXPROD_IDX_LO
268 #define TI_MB_JUMBORXPROD_IDX_HI	0x520 /* Tigon 2 only */
269 #define TI_MB_JUMBORXPROD_IDX_LO	0x524 /* Tigon 2 only */
270 #define TI_MB_JUMBORXPROD_IDX		TI_MB_JUMBORXPROD_IDX_LO
271 #define TI_MB_MINIRXPROD_IDX_HI		0x528 /* Tigon 2 only */
272 #define TI_MB_MINIRXPROD_IDX_LO		0x52C /* Tigon 2 only */
273 #define TI_MB_MINIRXPROD_IDX		TI_MB_MINIRXPROD_IDX_LO
274 #define TI_MB_RSVD			0x530
275 
276 /*
277  * Tigon 2 general communication registers. These are 64 and 32 bit
278  * registers which are only valid after the firmware has been
279  * loaded and started. They actually exist in NIC memory but are
280  * mapped into the host memory via the shared memory region.
281  *
282  * The NIC internally maps these registers starting at address 0,
283  * so to determine the NIC address of any of these registers, we
284  * subtract 0x600 (the address of the first register).
285  */
286 
287 #define TI_GCR_BASE			0x600
288 #define TI_GCR_MACADDR			0x600
289 #define TI_GCR_PAR0			0x600
290 #define TI_GCR_PAR1			0x604
291 #define TI_GCR_GENINFO_HI		0x608
292 #define TI_GCR_GENINFO_LO		0x60C
293 #define TI_GCR_MCASTADDR		0x610 /* obsolete */
294 #define TI_GCR_MAR0			0x610 /* obsolete */
295 #define TI_GCR_MAR1			0x614 /* obsolete */
296 #define TI_GCR_OPMODE			0x618
297 #define TI_GCR_DMA_READCFG		0x61C
298 #define TI_GCR_DMA_WRITECFG		0x620
299 #define TI_GCR_TX_BUFFER_RATIO		0x624
300 #define TI_GCR_EVENTCONS_IDX		0x628
301 #define TI_GCR_CMDCONS_IDX		0x62C
302 #define TI_GCR_TUNEPARMS		0x630
303 #define TI_GCR_RX_COAL_TICKS		0x630
304 #define TI_GCR_TX_COAL_TICKS		0x634
305 #define TI_GCR_STAT_TICKS		0x638
306 #define TI_GCR_TX_MAX_COAL_BD		0x63C
307 #define TI_GCR_RX_MAX_COAL_BD		0x640
308 #define TI_GCR_NIC_TRACING		0x644
309 #define TI_GCR_GLINK			0x648
310 #define TI_GCR_LINK			0x64C
311 #define TI_GCR_NICTRACE_PTR		0x650
312 #define TI_GCR_NICTRACE_START		0x654
313 #define TI_GCR_NICTRACE_LEN		0x658
314 #define TI_GCR_IFINDEX			0x65C
315 #define TI_GCR_IFMTU			0x660
316 #define TI_GCR_MASK_INTRS		0x664
317 #define TI_GCR_GLINK_STAT		0x668
318 #define TI_GCR_LINK_STAT		0x66C
319 #define TI_GCR_RXRETURNCONS_IDX		0x680
320 #define TI_GCR_CMDRING			0x700
321 
322 #define TI_GCR_NIC_ADDR(x)		(x - TI_GCR_BASE)
323 
324 /*
325  * Local memory window. The local memory window is a 2K shared
326  * memory region which can be used to access the NIC's internal
327  * SRAM. The window can be mapped to a given 2K region using
328  * the TI_WINDOW_BASE register.
329  */
330 #define TI_WINDOW			0x800
331 #define TI_WINLEN			0x800
332 
333 #define TI_TICKS_PER_SEC		1000000
334 
335 /*
336  * Operation mode register.
337  */
338 #define TI_OPMODE_BYTESWAP_BD		0x00000002
339 #define TI_OPMODE_WORDSWAP_BD		0x00000004
340 #define TI_OPMODE_WARN_ENB		0x00000008 /* not yet implimented */
341 #define TI_OPMODE_BYTESWAP_DATA		0x00000010
342 #define TI_OPMODE_1_DMA_ACTIVE		0x00000040
343 #define TI_OPMODE_SBUS			0x00000100
344 #define TI_OPMODE_DONT_FRAG_JUMBO	0x00000200
345 #define TI_OPMODE_INCLUDE_CRC		0x00000400
346 #define TI_OPMODE_RX_BADFRAMES		0x00000800
347 #define TI_OPMODE_NO_EVENT_INTRS	0x00001000
348 #define TI_OPMODE_NO_TX_INTRS		0x00002000
349 #define TI_OPMODE_NO_RX_INTRS		0x00004000
350 #define TI_OPMODE_FATAL_ENB		0x40000000 /* not yet implimented */
351 #define TI_OPMODE_JUMBO_HDRSPLIT	0x00008000
352 
353 /*
354  * DMA configuration thresholds.
355  */
356 #define TI_DMA_STATE_THRESH_16W		0x00000100
357 #define TI_DMA_STATE_THRESH_8W		0x00000080
358 #define TI_DMA_STATE_THRESH_4W		0x00000040
359 #define TI_DMA_STATE_THRESH_2W		0x00000020
360 #define TI_DMA_STATE_THRESH_1W		0x00000010
361 
362 #define TI_DMA_STATE_FORCE_32_BIT	0x00000008
363 
364 /*
365  * Gigabit link status bits.
366  */
367 #define TI_GLNK_SENSE_NO_BEG		0x00002000
368 #define TI_GLNK_LOOPBACK		0x00004000
369 #define TI_GLNK_PREF			0x00008000
370 #define TI_GLNK_1000MB			0x00040000
371 #define TI_GLNK_FULL_DUPLEX		0x00080000
372 #define TI_GLNK_TX_FLOWCTL_Y		0x00200000 /* Tigon 2 only */
373 #define TI_GLNK_RX_FLOWCTL_Y		0x00800000
374 #define TI_GLNK_AUTONEGENB		0x20000000
375 #define TI_GLNK_ENB			0x40000000
376 
377 /*
378  * Link status bits.
379  */
380 #define TI_LNK_LOOPBACK			0x00004000
381 #define TI_LNK_PREF			0x00008000
382 #define TI_LNK_10MB			0x00010000
383 #define TI_LNK_100MB			0x00020000
384 #define TI_LNK_1000MB			0x00040000
385 #define TI_LNK_FULL_DUPLEX		0x00080000
386 #define TI_LNK_HALF_DUPLEX		0x00100000
387 #define TI_LNK_TX_FLOWCTL_Y		0x00200000 /* Tigon 2 only */
388 #define TI_LNK_RX_FLOWCTL_Y		0x00800000
389 #define TI_LNK_AUTONEGENB		0x20000000
390 #define TI_LNK_ENB			0x40000000
391 
392 /*
393  * Ring size constants.
394  */
395 #define TI_EVENT_RING_CNT	256
396 #define TI_CMD_RING_CNT		64
397 #define TI_STD_RX_RING_CNT	512
398 #define TI_JUMBO_RX_RING_CNT	256
399 #define TI_MINI_RX_RING_CNT	1024
400 #define TI_RETURN_RING_CNT	2048
401 
402 #define TI_MAXTXSEGS		32
403 #define TI_RING_ALIGN		32
404 #define TI_JUMBO_RING_ALIGN	64
405 
406 /*
407  * Possible TX ring sizes.
408  */
409 #define TI_TX_RING_CNT_128	128
410 #define TI_TX_RING_BASE_128	0x3800
411 
412 #define TI_TX_RING_CNT_256	256
413 #define TI_TX_RING_BASE_256	0x3000
414 
415 #define TI_TX_RING_CNT_512	512
416 #define TI_TX_RING_BASE_512	0x2000
417 
418 #define TI_TX_RING_CNT		TI_TX_RING_CNT_512
419 #define TI_TX_RING_BASE		TI_TX_RING_BASE_512
420 
421 /*
422  * The Tigon can have up to 8MB of external SRAM, however the Tigon 1
423  * is limited to 2MB total, and in general I think most adapters have
424  * around 1MB. We use this value for zeroing the NIC's SRAM, so to
425  * be safe we use the largest possible value (zeroing memory that
426  * isn't there doesn't hurt anything).
427  */
428 #define TI_MEM_MAX		0x7FFFFF
429 
430 /*
431  * Maximum register address on the Tigon.
432  */
433 #define	TI_REG_MAX		0x3fff
434 
435 /*
436  * These values were taken from Alteon's tg.h.
437  */
438 #define TI_BEG_SRAM     0x0             /* host thinks it's here */
439 #define TI_BEG_SCRATCH  0xc00000        /* beg of scratch pad area */
440 #define TI_END_SRAM_II     0x800000        /* end of SRAM, for 2 MB stuffed */
441 #define TI_END_SCRATCH_II  0xc04000        /* end of scratch pad CPU A (16KB) */
442 #define TI_END_SCRATCH_B 0xc02000       /* end of scratch pad CPU B (8KB) */
443 #define TI_BEG_SCRATCH_B_DEBUG 0xd00000 /* beg of scratch pad for ioctl */
444 #define TI_END_SCRATCH_B_DEBUG 0xd02000 /* end of scratch pad for ioctl */
445 #define TI_SCRATCH_DEBUG_OFF 0x100000   /* offset for ioctl usage */
446 #define TI_END_SRAM_I     0x200000        /* end of SRAM, for 2 MB stuffed */
447 #define TI_END_SCRATCH_I  0xc00800        /* end of scratch pad area (2KB) */
448 #define TI_BEG_PROM     0x40000000      /* beg of PROM, special access */
449 #define TI_BEG_FLASH    0x80000000      /* beg of EEPROM, special access */
450 #define TI_END_FLASH    0x80100000      /* end of EEPROM for 1 MB stuff */
451 #define TI_BEG_SER_EEPROM 0xa0000000    /* beg of Serial EEPROM (fake out) */
452 #define TI_END_SER_EEPROM 0xa0002000    /* end of Serial EEPROM (fake out) */
453 #define TI_BEG_REGS     0xc0000000      /* beg of register area */
454 #define TI_END_REGS     0xc0000400      /* end of register area */
455 #define TI_END_WRITE_REGS 0xc0000180    /* can't write GPRs currently */
456 #define TI_BEG_REGS2    0xc0000200      /* beg of second writeable reg area */
457 /* the EEPROM is byte addressable in a pretty odd way */
458 #define EEPROM_BYTE_LOC 0xff000000
459 
460 /*
461  * From Alteon's tg.h.
462  */
463 #define TI_PROCESSOR_A          0
464 #define TI_PROCESSOR_B          1
465 #define TI_CPU_A                TG_PROCESSOR_A
466 #define TI_CPU_B                TG_PROCESSOR_B
467 
468 /*
469  * Following macro can be used to access to any of the CPU registers
470  * It will adjust the address appropriately.
471  * Parameters:
472  *      reg - The register to access, e.g TI_CPU_CONTROL
473  *      cpu - cpu, i.e PROCESSOR_A or PROCESSOR_B (or TI_CPU_A or TI_CPU_B)
474  */
475 #define CPU_REG(reg, cpu) ((reg) + (cpu) * 0x100)
476 
477 /*
478  * Even on the alpha, pci addresses are 32-bit quantities
479  */
480 
481 typedef struct {
482 	uint32_t	ti_addr_hi;
483 	uint32_t	ti_addr_lo;
484 } ti_hostaddr;
485 
486 #define TI_HOSTADDR(x)		x.ti_addr_lo
487 
488 static __inline void
489 ti_hostaddr64(ti_hostaddr *x, bus_addr_t addr)
490 {
491 	uint64_t baddr;
492 
493 	baddr = (uint64_t)addr;
494 	x->ti_addr_lo = baddr & 0xffffffff;
495 	x->ti_addr_hi = baddr >> 32;
496 }
497 
498 /*
499  * Ring control block structure. The rules for the max_len field
500  * are as follows:
501  *
502  * For the send ring, max_len indicates the number of entries in the
503  * ring (128, 256 or 512).
504  *
505  * For the standard receive ring, max_len indicates the threshold
506  * used to decide when a frame should be put in the jumbo receive ring
507  * instead of the standard one.
508  *
509  * For the mini ring, max_len indicates the size of the buffers in the
510  * ring. This is the value used to decide when a frame is small enough
511  * to be placed in the mini ring.
512  *
513  * For the return receive ring, max_len indicates the number of entries
514  * in the ring. It can be one of 2048, 1024 or 0 (which is the same as
515  * 2048 for backwards compatibility). The value 1024 can only be used
516  * if the mini ring is disabled.
517  */
518 struct ti_rcb {
519 	ti_hostaddr		ti_hostaddr;
520 #if BYTE_ORDER == BIG_ENDIAN
521 	uint16_t		ti_max_len;
522 	uint16_t		ti_flags;
523 #else
524 	uint16_t		ti_flags;
525 	uint16_t		ti_max_len;
526 #endif
527 	uint32_t		ti_unused;
528 };
529 
530 #define TI_RCB_FLAG_TCP_UDP_CKSUM	0x00000001
531 #define TI_RCB_FLAG_IP_CKSUM		0x00000002
532 #define TI_RCB_FLAG_NO_PHDR_CKSUM	0x00000008
533 #define TI_RCB_FLAG_VLAN_ASSIST		0x00000010
534 #define TI_RCB_FLAG_COAL_UPD_ONLY	0x00000020
535 #define TI_RCB_FLAG_HOST_RING		0x00000040
536 #define TI_RCB_FLAG_IEEE_SNAP_CKSUM	0x00000080
537 #define TI_RCB_FLAG_USE_EXT_RX_BD	0x00000100
538 #define TI_RCB_FLAG_RING_DISABLED	0x00000200
539 
540 struct ti_producer {
541 	uint32_t		ti_idx;
542 	uint32_t		ti_unused;
543 };
544 
545 /*
546  * Tigon general information block. This resides in host memory
547  * and contains the status counters, ring control blocks and
548  * producer pointers.
549  */
550 
551 struct ti_gib {
552 	struct ti_stats		ti_stats;
553 	struct ti_rcb		ti_ev_rcb;
554 	struct ti_rcb		ti_cmd_rcb;
555 	struct ti_rcb		ti_tx_rcb;
556 	struct ti_rcb		ti_std_rx_rcb;
557 	struct ti_rcb		ti_jumbo_rx_rcb;
558 	struct ti_rcb		ti_mini_rx_rcb;
559 	struct ti_rcb		ti_return_rcb;
560 	ti_hostaddr		ti_ev_prodidx_ptr;
561 	ti_hostaddr		ti_return_prodidx_ptr;
562 	ti_hostaddr		ti_tx_considx_ptr;
563 	ti_hostaddr		ti_refresh_stats_ptr;
564 };
565 
566 /*
567  * Buffer descriptor structures. There are basically three types
568  * of structures: normal receive descriptors, extended receive
569  * descriptors and transmit descriptors. The extended receive
570  * descriptors are optionally used only for the jumbo receive ring.
571  */
572 
573 struct ti_rx_desc {
574 	ti_hostaddr		ti_addr;
575 #if BYTE_ORDER == BIG_ENDIAN
576 	uint16_t		ti_idx;
577 	uint16_t		ti_len;
578 #else
579 	uint16_t		ti_len;
580 	uint16_t		ti_idx;
581 #endif
582 #if BYTE_ORDER == BIG_ENDIAN
583 	uint16_t		ti_type;
584 	uint16_t		ti_flags;
585 #else
586 	uint16_t		ti_flags;
587 	uint16_t		ti_type;
588 #endif
589 #if BYTE_ORDER == BIG_ENDIAN
590 	uint16_t		ti_ip_cksum;
591 	uint16_t		ti_tcp_udp_cksum;
592 #else
593 	uint16_t		ti_tcp_udp_cksum;
594 	uint16_t		ti_ip_cksum;
595 #endif
596 #if BYTE_ORDER == BIG_ENDIAN
597 	uint16_t		ti_error_flags;
598 	uint16_t		ti_vlan_tag;
599 #else
600 	uint16_t		ti_vlan_tag;
601 	uint16_t		ti_error_flags;
602 #endif
603 	uint32_t		ti_rsvd;
604 	uint32_t		ti_opaque;
605 };
606 
607 #define	TI_STD_RX_RING_SZ	(sizeof(struct ti_rx_desc) * TI_STD_RX_RING_CNT)
608 #define	TI_MINI_RX_RING_SZ	(sizeof(struct ti_rx_desc) * TI_MINI_RX_RING_CNT)
609 #define	TI_RX_RETURN_RING_SZ	(sizeof(struct ti_rx_desc) * TI_RETURN_RING_CNT)
610 
611 struct ti_rx_desc_ext {
612 	ti_hostaddr		ti_addr1;
613 	ti_hostaddr		ti_addr2;
614 	ti_hostaddr		ti_addr3;
615 #if BYTE_ORDER == BIG_ENDIAN
616 	uint16_t		ti_len1;
617 	uint16_t		ti_len2;
618 #else
619 	uint16_t		ti_len2;
620 	uint16_t		ti_len1;
621 #endif
622 #if BYTE_ORDER == BIG_ENDIAN
623 	uint16_t		ti_len3;
624 	uint16_t		ti_rsvd0;
625 #else
626 	uint16_t		ti_rsvd0;
627 	uint16_t		ti_len3;
628 #endif
629 	ti_hostaddr		ti_addr0;
630 #if BYTE_ORDER == BIG_ENDIAN
631 	uint16_t		ti_idx;
632 	uint16_t		ti_len0;
633 #else
634 	uint16_t		ti_len0;
635 	uint16_t		ti_idx;
636 #endif
637 #if BYTE_ORDER == BIG_ENDIAN
638 	uint16_t		ti_type;
639 	uint16_t		ti_flags;
640 #else
641 	uint16_t		ti_flags;
642 	uint16_t		ti_type;
643 #endif
644 #if BYTE_ORDER == BIG_ENDIAN
645 	uint16_t		ti_ip_cksum;
646 	uint16_t		ti_tcp_udp_cksum;
647 #else
648 	uint16_t		ti_tcp_udp_cksum;
649 	uint16_t		ti_ip_cksum;
650 #endif
651 #if BYTE_ORDER == BIG_ENDIAN
652 	uint16_t		ti_error_flags;
653 	uint16_t		ti_vlan_tag;
654 #else
655 	uint16_t		ti_vlan_tag;
656 	uint16_t		ti_error_flags;
657 #endif
658 	uint32_t		ti_rsvd1;
659 	uint32_t		ti_opaque;
660 };
661 
662 #ifdef TI_SF_BUF_JUMBO
663 #define	TI_JUMBO_RX_RING_SZ	\
664 	(sizeof(struct ti_rx_desc_ext) * TI_JUMBO_RX_RING_CNT)
665 #else
666 #define	TI_JUMBO_RX_RING_SZ	\
667 	(sizeof(struct ti_rx_desc) * TI_JUMBO_RX_RING_CNT)
668 #endif
669 
670 /*
671  * Transmit descriptors are, mercifully, very small.
672  */
673 struct ti_tx_desc {
674 	ti_hostaddr		ti_addr;
675 #if BYTE_ORDER == BIG_ENDIAN
676 	uint16_t		ti_len;
677 	uint16_t		ti_flags;
678 #else
679 	uint16_t		ti_flags;
680 	uint16_t		ti_len;
681 #endif
682 #if BYTE_ORDER == BIG_ENDIAN
683 	uint16_t		ti_rsvd;
684 	uint16_t		ti_vlan_tag;
685 #else
686 	uint16_t		ti_vlan_tag;
687 	uint16_t		ti_rsvd;
688 #endif
689 };
690 
691 #define	TI_TX_RING_SZ		(sizeof(struct ti_tx_desc) * TI_TX_RING_CNT)
692 
693 /*
694  * NOTE!  On the Alpha, we have an alignment constraint.
695  * The first thing in the packet is a 14-byte Ethernet header.
696  * This means that the packet is misaligned.  To compensate,
697  * we actually offset the data 2 bytes into the cluster.  This
698  * aligns the packet after the Ethernet header at a 32-bit
699  * boundary.
700  */
701 
702 #define TI_FRAMELEN		1518
703 #define TI_JUMBO_FRAMELEN	9018
704 #define TI_JUMBO_MTU		(TI_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
705 #define TI_PAGE_SIZE		PAGE_SIZE
706 #define TI_MIN_FRAMELEN		60
707 
708 /*
709  * Buffer descriptor error flags.
710  */
711 #define TI_BDERR_CRC			0x0001
712 #define TI_BDERR_COLLDETECT		0x0002
713 #define TI_BDERR_LINKLOST		0x0004
714 #define TI_BDERR_DECODE			0x0008
715 #define TI_BDERR_ODD_NIBBLES		0x0010
716 #define TI_BDERR_MAC_ABRT		0x0020
717 #define TI_BDERR_RUNT			0x0040
718 #define TI_BDERR_TRUNC			0x0080
719 #define TI_BDERR_GIANT			0x0100
720 
721 /*
722  * Buffer descriptor flags.
723  */
724 #define TI_BDFLAG_TCP_UDP_CKSUM		0x0001
725 #define TI_BDFLAG_IP_CKSUM		0x0002
726 #define TI_BDFLAG_END			0x0004
727 #define TI_BDFLAG_MORE			0x0008
728 #define TI_BDFLAG_JUMBO_RING		0x0010
729 #define TI_BDFLAG_UCAST_PKT		0x0020
730 #define TI_BDFLAG_MCAST_PKT		0x0040
731 #define TI_BDFLAG_BCAST_PKT		0x0060
732 #define TI_BDFLAG_IP_FRAG		0x0080
733 #define TI_BDFLAG_IP_FRAG_END		0x0100
734 #define TI_BDFLAG_VLAN_TAG		0x0200
735 #define TI_BDFLAG_ERROR			0x0400
736 #define TI_BDFLAG_COAL_NOW		0x0800
737 #define	TI_BDFLAG_MINI_RING		0x1000
738 
739 /*
740  * Descriptor type flags. I think these only have meaning for
741  * the Tigon 1. I had to extract them from the sample driver source
742  * since they aren't in the manual.
743  */
744 #define TI_BDTYPE_TYPE_NULL			0x0000
745 #define TI_BDTYPE_SEND_BD			0x0001
746 #define TI_BDTYPE_RECV_BD			0x0002
747 #define TI_BDTYPE_RECV_JUMBO_BD			0x0003
748 #define TI_BDTYPE_RECV_BD_LAST			0x0004
749 #define TI_BDTYPE_SEND_DATA			0x0005
750 #define TI_BDTYPE_SEND_DATA_LAST		0x0006
751 #define TI_BDTYPE_RECV_DATA			0x0007
752 #define TI_BDTYPE_RECV_DATA_LAST		0x000b
753 #define TI_BDTYPE_EVENT_RUPT			0x000c
754 #define TI_BDTYPE_EVENT_NO_RUPT			0x000d
755 #define TI_BDTYPE_ODD_START			0x000e
756 #define TI_BDTYPE_UPDATE_STATS			0x000f
757 #define TI_BDTYPE_SEND_DUMMY_DMA		0x0010
758 #define TI_BDTYPE_EVENT_PROD			0x0011
759 #define TI_BDTYPE_TX_CONS			0x0012
760 #define TI_BDTYPE_RX_PROD			0x0013
761 #define TI_BDTYPE_REFRESH_STATS			0x0014
762 #define TI_BDTYPE_SEND_DATA_LAST_VLAN		0x0015
763 #define TI_BDTYPE_SEND_DATA_COAL		0x0016
764 #define TI_BDTYPE_SEND_DATA_LAST_COAL		0x0017
765 #define TI_BDTYPE_SEND_DATA_LAST_VLAN_COAL	0x0018
766 #define TI_BDTYPE_TX_CONS_NO_INTR		0x0019
767 
768 /*
769  * Tigon command structure.
770  */
771 struct ti_cmd_desc {
772 	uint32_t		ti_cmdx;
773 };
774 
775 #define TI_CMD_CMD(cmd)		(((((cmd)->ti_cmdx)) >> 24) & 0xff)
776 #define TI_CMD_CODE(cmd)	(((((cmd)->ti_cmdx)) >> 12) & 0xfff)
777 #define TI_CMD_IDX(cmd)		((((cmd)->ti_cmdx)) & 0xfff)
778 
779 #define TI_CMD_HOST_STATE		0x01
780 #define TI_CMD_CODE_STACK_UP		0x01
781 #define TI_CMD_CODE_STACK_DOWN		0x02
782 
783 /*
784  * This command enables software address filtering. It's a workaround
785  * for a bug in the Tigon 1 and not implemented for the Tigon 2.
786  */
787 #define TI_CMD_FDR_FILTERING		0x02
788 #define TI_CMD_CODE_FILT_ENB		0x01
789 #define TI_CMD_CODE_FILT_DIS		0x02
790 
791 #define TI_CMD_SET_RX_PROD_IDX		0x03 /* obsolete */
792 #define TI_CMD_UPDATE_GENCOM		0x04
793 #define TI_CMD_RESET_JUMBO_RING		0x05
794 #define TI_CMD_SET_PARTIAL_RX_CNT	0x06
795 #define TI_CMD_ADD_MCAST_ADDR		0x08 /* obsolete */
796 #define TI_CMD_DEL_MCAST_ADDR		0x09 /* obsolete */
797 
798 #define TI_CMD_SET_PROMISC_MODE		0x0A
799 #define TI_CMD_CODE_PROMISC_ENB		0x01
800 #define TI_CMD_CODE_PROMISC_DIS		0x02
801 
802 #define TI_CMD_LINK_NEGOTIATION		0x0B
803 #define TI_CMD_CODE_NEGOTIATE_BOTH	0x00
804 #define TI_CMD_CODE_NEGOTIATE_GIGABIT	0x01
805 #define TI_CMD_CODE_NEGOTIATE_10_100	0x02
806 
807 #define TI_CMD_SET_MAC_ADDR		0x0C
808 #define TI_CMD_CLR_PROFILE		0x0D
809 
810 #define TI_CMD_SET_ALLMULTI		0x0E
811 #define TI_CMD_CODE_ALLMULTI_ENB	0x01
812 #define TI_CMD_CODE_ALLMULTI_DIS	0x02
813 
814 #define TI_CMD_CLR_STATS		0x0F
815 #define TI_CMD_SET_RX_JUMBO_PROD_IDX	0x10 /* obsolete */
816 #define TI_CMD_RFRSH_STATS		0x11
817 
818 #define TI_CMD_EXT_ADD_MCAST		0x12
819 #define TI_CMD_EXT_DEL_MCAST		0x13
820 
821 /*
822  * Utility macros to make issuing commands a little simpler. Assumes
823  * that 'sc' and 'cmd' are in local scope.
824  */
825 #define TI_DO_CMD(x, y, z)	do {				\
826 	cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z)));	\
827 	ti_cmd(sc, &cmd);					\
828 } while(0)
829 
830 #define TI_DO_CMD_EXT(x, y, z, v, w)	do {			\
831 	cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z)));	\
832 	ti_cmd_ext(sc, &cmd, (v), (w));				\
833 } while(0)
834 
835 /*
836  * Other utility macros.
837  */
838 #define TI_INC(x, y)	(x) = ((x) + 1) % y
839 
840 #define TI_UPDATE_JUMBOPROD(x, y)	do {				\
841 	if ((x)->ti_hwrev == TI_HWREV_TIGON)				\
842 		TI_DO_CMD(TI_CMD_SET_RX_JUMBO_PROD_IDX, 0, (y));	\
843 	else								\
844 		CSR_WRITE_4((x), TI_MB_JUMBORXPROD_IDX, (y));		\
845 } while(0)
846 
847 #define TI_UPDATE_MINIPROD(x, y)					\
848 		CSR_WRITE_4((x), TI_MB_MINIRXPROD_IDX, (y))
849 
850 #define TI_UPDATE_STDPROD(x, y)		do {				\
851 	if ((x)->ti_hwrev == TI_HWREV_TIGON)				\
852 		TI_DO_CMD(TI_CMD_SET_RX_PROD_IDX, 0, (y));		\
853 	else								\
854 		CSR_WRITE_4((x), TI_MB_STDRXPROD_IDX, (y));		\
855 } while(0)
856 
857 /*
858  * Tigon event structure.
859  */
860 struct ti_event_desc {
861 	uint32_t		ti_eventx;
862 	uint32_t		ti_rsvd;
863 };
864 #define	TI_EVENT_RING_SZ	(sizeof(struct ti_event_desc) * TI_EVENT_RING_CNT)
865 
866 #define TI_EVENT_EVENT(e)	(((((e)->ti_eventx)) >> 24) & 0xff)
867 #define TI_EVENT_CODE(e)	(((((e)->ti_eventx)) >> 12) & 0xfff)
868 #define TI_EVENT_IDX(e)		(((((e)->ti_eventx))) & 0xfff)
869 
870 /*
871  * Tigon events.
872  */
873 #define TI_EV_FIRMWARE_UP		0x01
874 #define TI_EV_STATS_UPDATED		0x04
875 
876 #define TI_EV_LINKSTAT_CHANGED		0x06
877 #define TI_EV_CODE_GIG_LINK_UP		0x01
878 #define TI_EV_CODE_LINK_DOWN		0x02
879 #define TI_EV_CODE_LINK_UP		0x03
880 
881 #define TI_EV_ERROR			0x07
882 #define TI_EV_CODE_ERR_INVAL_CMD	0x01
883 #define TI_EV_CODE_ERR_UNIMP_CMD	0x02
884 #define TI_EV_CODE_ERR_BADCFG		0x03
885 
886 #define TI_EV_MCAST_UPDATED		0x08
887 #define TI_EV_CODE_MCAST_ADD		0x01
888 #define TI_EV_CODE_MCAST_DEL		0x02
889 
890 #define TI_EV_RESET_JUMBO_RING		0x09
891 /*
892  * Register access macros. The Tigon always uses memory mapped register
893  * accesses and all registers must be accessed with 32 bit operations.
894  */
895 
896 #define CSR_WRITE_4(sc, reg, val)	\
897 	bus_space_write_4((sc)->ti_btag, (sc)->ti_bhandle, (reg), (val))
898 
899 #define CSR_READ_4(sc, reg)		\
900 	bus_space_read_4((sc)->ti_btag, (sc)->ti_bhandle, (reg))
901 
902 #define TI_SETBIT(sc, reg, x)	\
903 	CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) | (x)))
904 #define TI_CLRBIT(sc, reg, x)	\
905 	CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) & ~(x)))
906 
907 struct ti_txdesc {
908 	struct mbuf	*tx_m;
909 	bus_dmamap_t	tx_dmamap;
910 	STAILQ_ENTRY(ti_txdesc) tx_q;
911 };
912 
913 STAILQ_HEAD(ti_txdq, ti_txdesc);
914 
915 struct ti_status {
916 	/*
917 	 * Make sure producer structures are aligned on 32-byte cache
918 	 * line boundaries.  We can create separate DMA area for each
919 	 * producer/consumer area but it wouldn't get much benefit
920 	 * since driver use a global driver lock.
921 	 */
922 	struct ti_producer	ti_ev_prodidx_r;
923 	uint32_t		ti_pad0[6];
924 	struct ti_producer	ti_return_prodidx_r;
925 	uint32_t		ti_pad1[6];
926 	struct ti_producer	ti_tx_considx_r;
927 	uint32_t		ti_pad2[6];
928 };
929 
930 /*
931  * Ring structures. Most of these reside in host memory and we tell
932  * the NIC where they are via the ring control blocks. The exceptions
933  * are the tx and command rings, which live in NIC memory and which
934  * we access via the shared memory window.
935  */
936 struct ti_ring_data {
937 	struct ti_gib		*ti_info;
938 	bus_addr_t		ti_info_paddr;
939 	struct ti_status	*ti_status;
940 	bus_addr_t		ti_status_paddr;
941 	struct ti_rx_desc	*ti_rx_std_ring;
942 	bus_addr_t		ti_rx_std_ring_paddr;
943 #ifdef TI_SF_BUF_JUMBO
944 	struct ti_rx_desc_ext	*ti_rx_jumbo_ring;
945 #else
946 	struct ti_rx_desc	*ti_rx_jumbo_ring;
947 #endif
948 	bus_addr_t		ti_rx_jumbo_ring_paddr;
949 	struct ti_rx_desc	*ti_rx_mini_ring;
950 	bus_addr_t		ti_rx_mini_ring_paddr;
951 	struct ti_rx_desc	*ti_rx_return_ring;
952 	bus_addr_t		ti_rx_return_ring_paddr;
953 	struct ti_event_desc	*ti_event_ring;
954 	bus_addr_t		ti_event_ring_paddr;
955 	struct ti_tx_desc	*ti_tx_ring;
956 	bus_addr_t		ti_tx_ring_paddr;
957 };
958 
959 /*
960  * Mbuf pointers. We need these to keep track of the virtual addresses
961  * of our mbuf chains since we can only convert from physical to virtual,
962  * not the other way around.
963  */
964 struct ti_chain_data {
965 	bus_dma_tag_t		ti_parent_tag;
966 	bus_dma_tag_t		ti_gib_tag;
967 	bus_dmamap_t		ti_gib_map;
968 	bus_dma_tag_t		ti_event_ring_tag;
969 	bus_dmamap_t		ti_event_ring_map;
970 	bus_dma_tag_t		ti_status_tag;
971 	bus_dmamap_t		ti_status_map;
972 	bus_dma_tag_t		ti_tx_ring_tag;
973 	bus_dmamap_t		ti_tx_ring_map;
974 	bus_dma_tag_t		ti_tx_tag;
975 	struct ti_txdesc	ti_txdesc[TI_TX_RING_CNT];
976 	struct ti_txdq		ti_txfreeq;
977 	struct ti_txdq		ti_txbusyq;
978 	bus_dma_tag_t		ti_rx_return_ring_tag;
979 	bus_dmamap_t		ti_rx_return_ring_map;
980 	bus_dma_tag_t		ti_rx_std_ring_tag;
981 	bus_dmamap_t		ti_rx_std_ring_map;
982 	bus_dma_tag_t		ti_rx_std_tag;
983 	struct mbuf		*ti_rx_std_chain[TI_STD_RX_RING_CNT];
984 	bus_dmamap_t		ti_rx_std_maps[TI_STD_RX_RING_CNT];
985 	bus_dmamap_t		ti_rx_std_sparemap;
986 	bus_dma_tag_t		ti_rx_jumbo_ring_tag;
987 	bus_dmamap_t		ti_rx_jumbo_ring_map;
988 	bus_dma_tag_t		ti_rx_jumbo_tag;
989 	struct mbuf		*ti_rx_jumbo_chain[TI_JUMBO_RX_RING_CNT];
990 	bus_dmamap_t		ti_rx_jumbo_maps[TI_JUMBO_RX_RING_CNT];
991 	bus_dmamap_t		ti_rx_jumbo_sparemap;
992 	bus_dma_tag_t		ti_rx_mini_ring_tag;
993 	bus_dmamap_t		ti_rx_mini_ring_map;
994 	bus_dma_tag_t		ti_rx_mini_tag;
995 	struct mbuf		*ti_rx_mini_chain[TI_MINI_RX_RING_CNT];
996 	bus_dmamap_t		ti_rx_mini_maps[TI_MINI_RX_RING_CNT];
997 	bus_dmamap_t		ti_rx_mini_sparemap;
998 };
999 
1000 struct ti_type {
1001 	uint16_t		ti_vid;
1002 	uint16_t		ti_did;
1003 	const char		*ti_name;
1004 };
1005 
1006 #define TI_HWREV_TIGON		0x01
1007 #define TI_HWREV_TIGON_II	0x02
1008 #define TI_TIMEOUT		1000
1009 #define TI_TXCONS_UNSET		0xFFFF	/* impossible value */
1010 
1011 struct ti_mc_entry {
1012 	struct ether_addr		mc_addr;
1013 	SLIST_ENTRY(ti_mc_entry)	mc_entries;
1014 };
1015 
1016 typedef enum {
1017 	TI_FLAG_NONE		= 0x00,
1018 	TI_FLAG_DEBUGING	= 0x01,
1019 	TI_FLAG_WAIT_FOR_LINK	= 0x02
1020 } ti_flag_vals;
1021 
1022 struct ti_softc {
1023 	device_t		ti_dev;
1024 	struct ifnet		*ti_ifp;
1025 	bus_space_handle_t	ti_bhandle;
1026 	bus_space_tag_t		ti_btag;
1027 	void			*ti_intrhand;
1028 	struct resource		*ti_irq;
1029 	struct resource		*ti_res;
1030 	struct ifmedia		ifmedia;	/* media info */
1031 	uint8_t			ti_hwrev;	/* Tigon rev (1 or 2) */
1032 	uint8_t			ti_copper;	/* 1000baseTX card */
1033 	uint8_t			ti_linkstat;	/* Link state */
1034 	int			ti_hdrsplit;	/* enable header splitting */
1035 	int			ti_dac;
1036 	struct ti_ring_data	ti_rdata;	/* rings */
1037 	struct ti_chain_data	ti_cdata;	/* mbufs */
1038 #define ti_ev_prodidx		ti_rdata.ti_status->ti_ev_prodidx_r
1039 #define ti_return_prodidx	ti_rdata.ti_status->ti_return_prodidx_r
1040 #define ti_tx_considx		ti_rdata.ti_status->ti_tx_considx_r
1041 	int			ti_tx_saved_prodidx;
1042 	int			ti_tx_saved_considx;
1043 	int			ti_rx_saved_considx;
1044 	int			ti_ev_saved_considx;
1045 	int			ti_cmd_saved_prodidx;
1046 	int			ti_std;		/* current std ring head */
1047 	int			ti_mini;	/* current mini ring head */
1048 	int			ti_jumbo;	/* current jumo ring head */
1049 	SLIST_HEAD(__ti_mchead, ti_mc_entry)	ti_mc_listhead;
1050 	uint32_t		ti_stat_ticks;
1051 	uint32_t		ti_rx_coal_ticks;
1052 	uint32_t		ti_tx_coal_ticks;
1053 	uint32_t		ti_rx_max_coal_bds;
1054 	uint32_t		ti_tx_max_coal_bds;
1055 	uint32_t		ti_tx_buf_ratio;
1056 	int			ti_if_flags;
1057 	int			ti_txcnt;
1058 	struct mtx		ti_mtx;
1059 	struct callout		ti_watchdog;
1060 	int			ti_timer;
1061 	ti_flag_vals		ti_flags;
1062 	uint8_t			*ti_membuf;
1063 	uint8_t			*ti_membuf2;
1064 	struct cdev		 *dev;
1065 };
1066 
1067 #define	TI_LOCK(_sc)		mtx_lock(&(_sc)->ti_mtx)
1068 #define	TI_UNLOCK(_sc)		mtx_unlock(&(_sc)->ti_mtx)
1069 #define	TI_LOCK_ASSERT(_sc)	mtx_assert(&(_sc)->ti_mtx, MA_OWNED)
1070 
1071 /*
1072  * Microchip Technology 24Cxx EEPROM control bytes
1073  */
1074 #define EEPROM_CTL_READ			0xA1	/* 0101 0001 */
1075 #define EEPROM_CTL_WRITE		0xA0	/* 0101 0000 */
1076 
1077 /*
1078  * Note that EEPROM_START leaves transmission enabled.
1079  */
1080 #define EEPROM_START	do {							\
1081 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock pin high */\
1082 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Set DATA bit to 1 */	\
1083 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit to write bit */\
1084 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA bit to 0 again */\
1085 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */	\
1086 } while(0)
1087 
1088 /*
1089  * EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so
1090  * that no further data can be written to the EEPROM I/O pin.
1091  */
1092 #define EEPROM_STOP	do {							\
1093 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit */	\
1094 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA to 0 */	\
1095 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock high */	\
1096 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit */	\
1097 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Toggle DATA to 1 */	\
1098 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit. */	\
1099 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */	\
1100 } while(0)
1101