xref: /freebsd/sys/dev/ti/if_tireg.h (revision f5147e312f43a9050468de539aeafa072caa1a60)
1 /*-
2  * SPDX-License-Identifier: BSD-4-Clause
3  *
4  * Copyright (c) 1997, 1998, 1999
5  *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *	This product includes software developed by Bill Paul.
18  * 4. Neither the name of the author nor the names of any co-contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  *
34  * $FreeBSD$
35  */
36 
37 /*
38  * Tigon register offsets. These are memory mapped registers
39  * which can be accessed with the CSR_READ_4()/CSR_WRITE_4() macros.
40  * Each register must be accessed using 32 bit operations.
41  *
42  * All reegisters are accessed through a 16K shared memory block.
43  * The first group of registers are actually copies of the PCI
44  * configuration space registers.
45  */
46 
47 #define TI_PCI_ID			0x000 /* PCI device/vendor ID */
48 #define TI_PCI_CMDSTAT			0x004
49 #define TI_PCI_CLASSCODE		0x008
50 #define TI_PCI_BIST			0x00C
51 #define TI_PCI_LOMEM			0x010 /* Shared memory base address */
52 #define TI_PCI_SUBSYS			0x02C
53 #define TI_PCI_ROMBASE			0x030
54 #define TI_PCI_INT			0x03C
55 
56 #ifndef PCIM_CMD_MWIEN
57 #define PCIM_CMD_MWIEN			0x0010
58 #endif
59 
60 /*
61  * Alteon AceNIC PCI vendor/device ID.
62  */
63 #define ALT_VENDORID			0x12AE
64 #define ALT_DEVICEID_ACENIC		0x0001
65 #define ALT_DEVICEID_ACENIC_COPPER	0x0002
66 
67 /*
68  * 3Com 3c985 PCI vendor/device ID.
69  */
70 #define TC_VENDORID			0x10B7
71 #define TC_DEVICEID_3C985		0x0001
72 
73 /*
74  * Netgear GA620 PCI vendor/device ID.
75  */
76 #define NG_VENDORID			0x1385
77 #define NG_DEVICEID_GA620		0x620A
78 #define NG_DEVICEID_GA620T		0x630A
79 
80 /*
81  * SGI device/vendor ID.
82  */
83 #define SGI_VENDORID			0x10A9
84 #define SGI_DEVICEID_TIGON		0x0009
85 
86 /*
87  * DEC vendor ID, Farallon device ID. Apparently, Farallon used
88  * the DEC vendor ID in their cards by mistake.
89  */
90 #define DEC_VENDORID			0x1011
91 #define DEC_DEVICEID_FARALLON_PN9000SX	0x001a
92 
93 /*
94  * Tigon configuration and control registers.
95  */
96 #define TI_MISC_HOST_CTL		0x040
97 #define TI_MISC_LOCAL_CTL		0x044
98 #define TI_SEM_AB			0x048 /* Tigon 2 only */
99 #define TI_MISC_CONF			0x050 /* Tigon 2 only */
100 #define TI_TIMER_BITS			0x054
101 #define TI_TIMERREF			0x058
102 #define TI_PCI_STATE			0x05C
103 #define TI_MAIN_EVENT_A			0x060
104 #define TI_MAILBOX_EVENT_A		0x064
105 #define TI_WINBASE			0x068
106 #define TI_WINDATA			0x06C
107 #define TI_MAIN_EVENT_B			0x070 /* Tigon 2 only */
108 #define TI_MAILBOX_EVENT_B		0x074 /* Tigon 2 only */
109 #define TI_TIMERREF_B			0x078 /* Tigon 2 only */
110 #define TI_SERIAL			0x07C
111 
112 /*
113  * Misc host control bits.
114  */
115 #define TI_MHC_INTSTATE			0x00000001
116 #define TI_MHC_CLEARINT			0x00000002
117 #define TI_MHC_RESET			0x00000008
118 #define TI_MHC_BYTE_SWAP_ENB		0x00000010
119 #define TI_MHC_WORD_SWAP_ENB		0x00000020
120 #define TI_MHC_MASK_INTS		0x00000040
121 #define TI_MHC_CHIP_REV_MASK		0xF0000000
122 
123 #define TI_MHC_BIGENDIAN_INIT	\
124 	(TI_MHC_BYTE_SWAP_ENB|TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT)
125 
126 #define TI_MHC_LITTLEENDIAN_INIT	\
127 	(TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT)
128 
129 /*
130  * Tigon chip rev values. Rev 4 is the Tigon 1. Rev 6 is the Tigon 2.
131  * Rev 5 is also the Tigon 2, but is a broken version which was never
132  * used in any actual hardware, so we ignore it.
133  */
134 #define TI_REV_TIGON_I			0x40000000
135 #define TI_REV_TIGON_II			0x60000000
136 
137 /*
138  * Firmware revision that we want.
139  */
140 #define TI_FIRMWARE_MAJOR		0xc
141 #define TI_FIRMWARE_MINOR		0x4
142 #define TI_FIRMWARE_FIX			0xb
143 
144 /*
145  * Miscellaneous Local Control register.
146  */
147 #define TI_MLC_EE_WRITE_ENB		0x00000010
148 #define TI_MLC_SRAM_BANK_SIZE		0x00000300 /* Tigon 2 only */
149 #define TI_MLC_LOCALADDR_21		0x00004000
150 #define TI_MLC_LOCALADDR_22		0x00008000
151 #define TI_MLC_SBUS_WRITEERR		0x00080000
152 #define TI_MLC_EE_CLK			0x00100000
153 #define TI_MLC_EE_TXEN			0x00200000
154 #define TI_MLC_EE_DOUT			0x00400000
155 #define TI_MLC_EE_DIN			0x00800000
156 
157 /* Possible memory sizes. */
158 #define TI_MLC_SRAM_BANK_DISA           0x00000000
159 #define TI_MLC_SRAM_BANK_1024K          0x00000100
160 #define TI_MLC_SRAM_BANK_512K           0x00000200
161 #define TI_MLC_SRAM_BANK_256K           0x00000300
162 
163 /*
164  * Offset of MAC address inside EEPROM.
165  */
166 #define TI_EE_MAC_OFFSET		0x8c
167 
168 #define TI_DMA_ASSIST			0x11C
169 #define TI_CPU_STATE			0x140
170 #define TI_CPU_PROGRAM_COUNTER		0x144
171 #define TI_SRAM_ADDR			0x154
172 #define TI_SRAM_DATA			0x158
173 #define TI_GEN_0			0x180
174 #define TI_GEN_X			0x1FC
175 #define TI_MAC_TX_STATE			0x200
176 #define TI_MAC_RX_STATE			0x220
177 #define TI_CPU_CTL_B			0x240 /* Tigon 2 only */
178 #define TI_CPU_PROGRAM_COUNTER_B	0x244 /* Tigon 2 only */
179 #define TI_SRAM_ADDR_B			0x254 /* Tigon 2 only */
180 #define TI_SRAM_DATA_B			0x258 /* Tigon 2 only */
181 #define TI_GEN_B_0			0x280 /* Tigon 2 only */
182 #define TI_GEN_B_X			0x2FC /* Tigon 2 only */
183 
184 /*
185  * Misc config register.
186  */
187 #define TI_MCR_SRAM_SYNCHRONOUS		0x00100000 /* Tigon 2 only */
188 
189 /*
190  * PCI state register.
191  */
192 #define TI_PCISTATE_FORCE_RESET		0x00000001
193 #define TI_PCISTATE_PROVIDE_LEN		0x00000002
194 #define TI_PCISTATE_READ_MAXDMA		0x0000001C
195 #define TI_PCISTATE_WRITE_MAXDMA	0x000000E0
196 #define TI_PCISTATE_MINDMA		0x0000FF00
197 #define TI_PCISTATE_FIFO_RETRY_ENB	0x00010000
198 #define TI_PCISTATE_USE_MEM_RD_MULT	0x00020000
199 #define TI_PCISTATE_NO_SWAP_READ_DMA	0x00040000
200 #define TI_PCISTATE_NO_SWAP_WRITE_DMA	0x00080000
201 #define TI_PCISTATE_66MHZ_BUS		0x00080000 /* Tigon 2 only */
202 #define TI_PCISTATE_32BIT_BUS		0x00100000 /* Tigon 2 only */
203 #define TI_PCISTATE_ENB_BYTE_ENABLES	0x00800000 /* Tigon 2 only */
204 #define TI_PCISTATE_READ_CMD		0x0F000000
205 #define TI_PCISTATE_WRITE_CMD		0xF0000000
206 
207 #define TI_PCI_READMAX_4		0x04
208 #define TI_PCI_READMAX_16		0x08
209 #define TI_PCI_READMAX_32		0x0C
210 #define TI_PCI_READMAX_64		0x10
211 #define TI_PCI_READMAX_128		0x14
212 #define TI_PCI_READMAX_256		0x18
213 #define TI_PCI_READMAX_1024		0x1C
214 
215 #define TI_PCI_WRITEMAX_4		0x20
216 #define TI_PCI_WRITEMAX_16		0x40
217 #define TI_PCI_WRITEMAX_32		0x60
218 #define TI_PCI_WRITEMAX_64		0x80
219 #define TI_PCI_WRITEMAX_128		0xA0
220 #define TI_PCI_WRITEMAX_256		0xC0
221 #define TI_PCI_WRITEMAX_1024		0xE0
222 
223 #define TI_PCI_READ_CMD			0x06000000
224 #define TI_PCI_WRITE_CMD		0x70000000
225 
226 /*
227  * DMA state register.
228  */
229 #define TI_DMASTATE_ENABLE		0x00000001
230 #define TI_DMASTATE_PAUSE		0x00000002
231 
232 /*
233  * CPU state register.
234  */
235 #define TI_CPUSTATE_RESET		0x00000001
236 #define TI_CPUSTATE_STEP		0x00000002
237 #define TI_CPUSTATE_ROMFAIL		0x00000010
238 #define TI_CPUSTATE_HALT		0x00010000
239 /*
240  * MAC TX state register
241  */
242 #define TI_TXSTATE_RESET		0x00000001
243 #define TI_TXSTATE_ENB			0x00000002
244 #define TI_TXSTATE_STOP			0x00000004
245 
246 /*
247  * MAC RX state register
248  */
249 #define TI_RXSTATE_RESET		0x00000001
250 #define TI_RXSTATE_ENB			0x00000002
251 #define TI_RXSTATE_STOP			0x00000004
252 
253 /*
254  * Tigon 2 mailbox registers. The mailbox area consists of 256 bytes
255  * split into 64 bit registers. Only the lower 32 bits of each mailbox
256  * are used.
257  */
258 #define TI_MB_HOSTINTR_HI		0x500
259 #define TI_MB_HOSTINTR_LO		0x504
260 #define TI_MB_HOSTINTR			TI_MB_HOSTINTR_LO
261 #define TI_MB_CMDPROD_IDX_HI		0x508
262 #define TI_MB_CMDPROD_IDX_LO		0x50C
263 #define TI_MB_CMDPROD_IDX		TI_MB_CMDPROD_IDX_LO
264 #define TI_MB_SENDPROD_IDX_HI		0x510
265 #define TI_MB_SENDPROD_IDX_LO		0x514
266 #define TI_MB_SENDPROD_IDX		TI_MB_SENDPROD_IDX_LO
267 #define TI_MB_STDRXPROD_IDX_HI		0x518 /* Tigon 2 only */
268 #define TI_MB_STDRXPROD_IDX_LO		0x51C /* Tigon 2 only */
269 #define TI_MB_STDRXPROD_IDX		TI_MB_STDRXPROD_IDX_LO
270 #define TI_MB_JUMBORXPROD_IDX_HI	0x520 /* Tigon 2 only */
271 #define TI_MB_JUMBORXPROD_IDX_LO	0x524 /* Tigon 2 only */
272 #define TI_MB_JUMBORXPROD_IDX		TI_MB_JUMBORXPROD_IDX_LO
273 #define TI_MB_MINIRXPROD_IDX_HI		0x528 /* Tigon 2 only */
274 #define TI_MB_MINIRXPROD_IDX_LO		0x52C /* Tigon 2 only */
275 #define TI_MB_MINIRXPROD_IDX		TI_MB_MINIRXPROD_IDX_LO
276 #define TI_MB_RSVD			0x530
277 
278 /*
279  * Tigon 2 general communication registers. These are 64 and 32 bit
280  * registers which are only valid after the firmware has been
281  * loaded and started. They actually exist in NIC memory but are
282  * mapped into the host memory via the shared memory region.
283  *
284  * The NIC internally maps these registers starting at address 0,
285  * so to determine the NIC address of any of these registers, we
286  * subtract 0x600 (the address of the first register).
287  */
288 
289 #define TI_GCR_BASE			0x600
290 #define TI_GCR_MACADDR			0x600
291 #define TI_GCR_PAR0			0x600
292 #define TI_GCR_PAR1			0x604
293 #define TI_GCR_GENINFO_HI		0x608
294 #define TI_GCR_GENINFO_LO		0x60C
295 #define TI_GCR_MCASTADDR		0x610 /* obsolete */
296 #define TI_GCR_MAR0			0x610 /* obsolete */
297 #define TI_GCR_MAR1			0x614 /* obsolete */
298 #define TI_GCR_OPMODE			0x618
299 #define TI_GCR_DMA_READCFG		0x61C
300 #define TI_GCR_DMA_WRITECFG		0x620
301 #define TI_GCR_TX_BUFFER_RATIO		0x624
302 #define TI_GCR_EVENTCONS_IDX		0x628
303 #define TI_GCR_CMDCONS_IDX		0x62C
304 #define TI_GCR_TUNEPARMS		0x630
305 #define TI_GCR_RX_COAL_TICKS		0x630
306 #define TI_GCR_TX_COAL_TICKS		0x634
307 #define TI_GCR_STAT_TICKS		0x638
308 #define TI_GCR_TX_MAX_COAL_BD		0x63C
309 #define TI_GCR_RX_MAX_COAL_BD		0x640
310 #define TI_GCR_NIC_TRACING		0x644
311 #define TI_GCR_GLINK			0x648
312 #define TI_GCR_LINK			0x64C
313 #define TI_GCR_NICTRACE_PTR		0x650
314 #define TI_GCR_NICTRACE_START		0x654
315 #define TI_GCR_NICTRACE_LEN		0x658
316 #define TI_GCR_IFINDEX			0x65C
317 #define TI_GCR_IFMTU			0x660
318 #define TI_GCR_MASK_INTRS		0x664
319 #define TI_GCR_GLINK_STAT		0x668
320 #define TI_GCR_LINK_STAT		0x66C
321 #define TI_GCR_RXRETURNCONS_IDX		0x680
322 #define TI_GCR_CMDRING			0x700
323 
324 #define TI_GCR_NIC_ADDR(x)		(x - TI_GCR_BASE)
325 
326 /*
327  * Local memory window. The local memory window is a 2K shared
328  * memory region which can be used to access the NIC's internal
329  * SRAM. The window can be mapped to a given 2K region using
330  * the TI_WINDOW_BASE register.
331  */
332 #define TI_WINDOW			0x800
333 #define TI_WINLEN			0x800
334 
335 #define TI_TICKS_PER_SEC		1000000
336 
337 /*
338  * Operation mode register.
339  */
340 #define TI_OPMODE_BYTESWAP_BD		0x00000002
341 #define TI_OPMODE_WORDSWAP_BD		0x00000004
342 #define	TI_OPMODE_WARN_ENB		0x00000008 /* not yet implemented */
343 #define TI_OPMODE_BYTESWAP_DATA		0x00000010
344 #define TI_OPMODE_1_DMA_ACTIVE		0x00000040
345 #define TI_OPMODE_SBUS			0x00000100
346 #define TI_OPMODE_DONT_FRAG_JUMBO	0x00000200
347 #define TI_OPMODE_INCLUDE_CRC		0x00000400
348 #define TI_OPMODE_RX_BADFRAMES		0x00000800
349 #define TI_OPMODE_NO_EVENT_INTRS	0x00001000
350 #define TI_OPMODE_NO_TX_INTRS		0x00002000
351 #define TI_OPMODE_NO_RX_INTRS		0x00004000
352 #define	TI_OPMODE_FATAL_ENB		0x40000000 /* not yet implemented */
353 #define TI_OPMODE_JUMBO_HDRSPLIT	0x00008000
354 
355 /*
356  * DMA configuration thresholds.
357  */
358 #define TI_DMA_STATE_THRESH_16W		0x00000100
359 #define TI_DMA_STATE_THRESH_8W		0x00000080
360 #define TI_DMA_STATE_THRESH_4W		0x00000040
361 #define TI_DMA_STATE_THRESH_2W		0x00000020
362 #define TI_DMA_STATE_THRESH_1W		0x00000010
363 
364 #define TI_DMA_STATE_FORCE_32_BIT	0x00000008
365 
366 /*
367  * Gigabit link status bits.
368  */
369 #define TI_GLNK_SENSE_NO_BEG		0x00002000
370 #define TI_GLNK_LOOPBACK		0x00004000
371 #define TI_GLNK_PREF			0x00008000
372 #define TI_GLNK_1000MB			0x00040000
373 #define TI_GLNK_FULL_DUPLEX		0x00080000
374 #define TI_GLNK_TX_FLOWCTL_Y		0x00200000 /* Tigon 2 only */
375 #define TI_GLNK_RX_FLOWCTL_Y		0x00800000
376 #define TI_GLNK_AUTONEGENB		0x20000000
377 #define TI_GLNK_ENB			0x40000000
378 
379 /*
380  * Link status bits.
381  */
382 #define TI_LNK_LOOPBACK			0x00004000
383 #define TI_LNK_PREF			0x00008000
384 #define TI_LNK_10MB			0x00010000
385 #define TI_LNK_100MB			0x00020000
386 #define TI_LNK_1000MB			0x00040000
387 #define TI_LNK_FULL_DUPLEX		0x00080000
388 #define TI_LNK_HALF_DUPLEX		0x00100000
389 #define TI_LNK_TX_FLOWCTL_Y		0x00200000 /* Tigon 2 only */
390 #define TI_LNK_RX_FLOWCTL_Y		0x00800000
391 #define TI_LNK_AUTONEGENB		0x20000000
392 #define TI_LNK_ENB			0x40000000
393 
394 /*
395  * Ring size constants.
396  */
397 #define TI_EVENT_RING_CNT	256
398 #define TI_CMD_RING_CNT		64
399 #define TI_STD_RX_RING_CNT	512
400 #define TI_JUMBO_RX_RING_CNT	256
401 #define TI_MINI_RX_RING_CNT	1024
402 #define TI_RETURN_RING_CNT	2048
403 
404 #define TI_MAXTXSEGS		32
405 #define TI_RING_ALIGN		32
406 #define TI_JUMBO_RING_ALIGN	64
407 
408 /*
409  * Possible TX ring sizes.
410  */
411 #define TI_TX_RING_CNT_128	128
412 #define TI_TX_RING_BASE_128	0x3800
413 
414 #define TI_TX_RING_CNT_256	256
415 #define TI_TX_RING_BASE_256	0x3000
416 
417 #define TI_TX_RING_CNT_512	512
418 #define TI_TX_RING_BASE_512	0x2000
419 
420 #define TI_TX_RING_CNT		TI_TX_RING_CNT_512
421 #define TI_TX_RING_BASE		TI_TX_RING_BASE_512
422 
423 /*
424  * The Tigon can have up to 8MB of external SRAM, however the Tigon 1
425  * is limited to 2MB total, and in general I think most adapters have
426  * around 1MB. We use this value for zeroing the NIC's SRAM, so to
427  * be safe we use the largest possible value (zeroing memory that
428  * isn't there doesn't hurt anything).
429  */
430 #define TI_MEM_MAX		0x7FFFFF
431 
432 /*
433  * Maximum register address on the Tigon.
434  */
435 #define	TI_REG_MAX		0x3fff
436 
437 /*
438  * These values were taken from Alteon's tg.h.
439  */
440 #define TI_BEG_SRAM     0x0             /* host thinks it's here */
441 #define TI_BEG_SCRATCH  0xc00000        /* beg of scratch pad area */
442 #define TI_END_SRAM_II     0x800000        /* end of SRAM, for 2 MB stuffed */
443 #define TI_END_SCRATCH_II  0xc04000        /* end of scratch pad CPU A (16KB) */
444 #define TI_END_SCRATCH_B 0xc02000       /* end of scratch pad CPU B (8KB) */
445 #define TI_BEG_SCRATCH_B_DEBUG 0xd00000 /* beg of scratch pad for ioctl */
446 #define TI_END_SCRATCH_B_DEBUG 0xd02000 /* end of scratch pad for ioctl */
447 #define TI_SCRATCH_DEBUG_OFF 0x100000   /* offset for ioctl usage */
448 #define TI_END_SRAM_I     0x200000        /* end of SRAM, for 2 MB stuffed */
449 #define TI_END_SCRATCH_I  0xc00800        /* end of scratch pad area (2KB) */
450 #define TI_BEG_PROM     0x40000000      /* beg of PROM, special access */
451 #define TI_BEG_FLASH    0x80000000      /* beg of EEPROM, special access */
452 #define TI_END_FLASH    0x80100000      /* end of EEPROM for 1 MB stuff */
453 #define TI_BEG_SER_EEPROM 0xa0000000    /* beg of Serial EEPROM (fake out) */
454 #define TI_END_SER_EEPROM 0xa0002000    /* end of Serial EEPROM (fake out) */
455 #define TI_BEG_REGS     0xc0000000      /* beg of register area */
456 #define TI_END_REGS     0xc0000400      /* end of register area */
457 #define TI_END_WRITE_REGS 0xc0000180    /* can't write GPRs currently */
458 #define TI_BEG_REGS2    0xc0000200      /* beg of second writeable reg area */
459 /* the EEPROM is byte addressable in a pretty odd way */
460 #define EEPROM_BYTE_LOC 0xff000000
461 
462 /*
463  * From Alteon's tg.h.
464  */
465 #define TI_PROCESSOR_A          0
466 #define TI_PROCESSOR_B          1
467 #define TI_CPU_A                TG_PROCESSOR_A
468 #define TI_CPU_B                TG_PROCESSOR_B
469 
470 /*
471  * Following macro can be used to access to any of the CPU registers
472  * It will adjust the address appropriately.
473  * Parameters:
474  *      reg - The register to access, e.g TI_CPU_CONTROL
475  *      cpu - cpu, i.e PROCESSOR_A or PROCESSOR_B (or TI_CPU_A or TI_CPU_B)
476  */
477 #define CPU_REG(reg, cpu) ((reg) + (cpu) * 0x100)
478 
479 /*
480  * Even on the alpha, pci addresses are 32-bit quantities
481  */
482 
483 typedef struct {
484 	uint32_t	ti_addr_hi;
485 	uint32_t	ti_addr_lo;
486 } ti_hostaddr;
487 
488 #define TI_HOSTADDR(x)		x.ti_addr_lo
489 
490 static __inline void
491 ti_hostaddr64(ti_hostaddr *x, bus_addr_t addr)
492 {
493 	uint64_t baddr;
494 
495 	baddr = (uint64_t)addr;
496 	x->ti_addr_lo = baddr & 0xffffffff;
497 	x->ti_addr_hi = baddr >> 32;
498 }
499 
500 /*
501  * Ring control block structure. The rules for the max_len field
502  * are as follows:
503  *
504  * For the send ring, max_len indicates the number of entries in the
505  * ring (128, 256 or 512).
506  *
507  * For the standard receive ring, max_len indicates the threshold
508  * used to decide when a frame should be put in the jumbo receive ring
509  * instead of the standard one.
510  *
511  * For the mini ring, max_len indicates the size of the buffers in the
512  * ring. This is the value used to decide when a frame is small enough
513  * to be placed in the mini ring.
514  *
515  * For the return receive ring, max_len indicates the number of entries
516  * in the ring. It can be one of 2048, 1024 or 0 (which is the same as
517  * 2048 for backwards compatibility). The value 1024 can only be used
518  * if the mini ring is disabled.
519  */
520 struct ti_rcb {
521 	ti_hostaddr		ti_hostaddr;
522 #if BYTE_ORDER == BIG_ENDIAN
523 	uint16_t		ti_max_len;
524 	uint16_t		ti_flags;
525 #else
526 	uint16_t		ti_flags;
527 	uint16_t		ti_max_len;
528 #endif
529 	uint32_t		ti_unused;
530 };
531 
532 #define TI_RCB_FLAG_TCP_UDP_CKSUM	0x00000001
533 #define TI_RCB_FLAG_IP_CKSUM		0x00000002
534 #define TI_RCB_FLAG_NO_PHDR_CKSUM	0x00000008
535 #define TI_RCB_FLAG_VLAN_ASSIST		0x00000010
536 #define TI_RCB_FLAG_COAL_UPD_ONLY	0x00000020
537 #define TI_RCB_FLAG_HOST_RING		0x00000040
538 #define TI_RCB_FLAG_IEEE_SNAP_CKSUM	0x00000080
539 #define TI_RCB_FLAG_USE_EXT_RX_BD	0x00000100
540 #define TI_RCB_FLAG_RING_DISABLED	0x00000200
541 
542 struct ti_producer {
543 	uint32_t		ti_idx;
544 	uint32_t		ti_unused;
545 };
546 
547 /*
548  * Tigon general information block. This resides in host memory
549  * and contains the status counters, ring control blocks and
550  * producer pointers.
551  */
552 
553 struct ti_gib {
554 	struct ti_stats		ti_stats;
555 	struct ti_rcb		ti_ev_rcb;
556 	struct ti_rcb		ti_cmd_rcb;
557 	struct ti_rcb		ti_tx_rcb;
558 	struct ti_rcb		ti_std_rx_rcb;
559 	struct ti_rcb		ti_jumbo_rx_rcb;
560 	struct ti_rcb		ti_mini_rx_rcb;
561 	struct ti_rcb		ti_return_rcb;
562 	ti_hostaddr		ti_ev_prodidx_ptr;
563 	ti_hostaddr		ti_return_prodidx_ptr;
564 	ti_hostaddr		ti_tx_considx_ptr;
565 	ti_hostaddr		ti_refresh_stats_ptr;
566 };
567 
568 /*
569  * Buffer descriptor structures. There are basically three types
570  * of structures: normal receive descriptors, extended receive
571  * descriptors and transmit descriptors. The extended receive
572  * descriptors are optionally used only for the jumbo receive ring.
573  */
574 
575 struct ti_rx_desc {
576 	ti_hostaddr		ti_addr;
577 #if BYTE_ORDER == BIG_ENDIAN
578 	uint16_t		ti_idx;
579 	uint16_t		ti_len;
580 #else
581 	uint16_t		ti_len;
582 	uint16_t		ti_idx;
583 #endif
584 #if BYTE_ORDER == BIG_ENDIAN
585 	uint16_t		ti_type;
586 	uint16_t		ti_flags;
587 #else
588 	uint16_t		ti_flags;
589 	uint16_t		ti_type;
590 #endif
591 #if BYTE_ORDER == BIG_ENDIAN
592 	uint16_t		ti_ip_cksum;
593 	uint16_t		ti_tcp_udp_cksum;
594 #else
595 	uint16_t		ti_tcp_udp_cksum;
596 	uint16_t		ti_ip_cksum;
597 #endif
598 #if BYTE_ORDER == BIG_ENDIAN
599 	uint16_t		ti_error_flags;
600 	uint16_t		ti_vlan_tag;
601 #else
602 	uint16_t		ti_vlan_tag;
603 	uint16_t		ti_error_flags;
604 #endif
605 	uint32_t		ti_rsvd;
606 	uint32_t		ti_opaque;
607 };
608 
609 #define	TI_STD_RX_RING_SZ	(sizeof(struct ti_rx_desc) * TI_STD_RX_RING_CNT)
610 #define	TI_MINI_RX_RING_SZ	(sizeof(struct ti_rx_desc) * TI_MINI_RX_RING_CNT)
611 #define	TI_RX_RETURN_RING_SZ	(sizeof(struct ti_rx_desc) * TI_RETURN_RING_CNT)
612 
613 struct ti_rx_desc_ext {
614 	ti_hostaddr		ti_addr1;
615 	ti_hostaddr		ti_addr2;
616 	ti_hostaddr		ti_addr3;
617 #if BYTE_ORDER == BIG_ENDIAN
618 	uint16_t		ti_len1;
619 	uint16_t		ti_len2;
620 #else
621 	uint16_t		ti_len2;
622 	uint16_t		ti_len1;
623 #endif
624 #if BYTE_ORDER == BIG_ENDIAN
625 	uint16_t		ti_len3;
626 	uint16_t		ti_rsvd0;
627 #else
628 	uint16_t		ti_rsvd0;
629 	uint16_t		ti_len3;
630 #endif
631 	ti_hostaddr		ti_addr0;
632 #if BYTE_ORDER == BIG_ENDIAN
633 	uint16_t		ti_idx;
634 	uint16_t		ti_len0;
635 #else
636 	uint16_t		ti_len0;
637 	uint16_t		ti_idx;
638 #endif
639 #if BYTE_ORDER == BIG_ENDIAN
640 	uint16_t		ti_type;
641 	uint16_t		ti_flags;
642 #else
643 	uint16_t		ti_flags;
644 	uint16_t		ti_type;
645 #endif
646 #if BYTE_ORDER == BIG_ENDIAN
647 	uint16_t		ti_ip_cksum;
648 	uint16_t		ti_tcp_udp_cksum;
649 #else
650 	uint16_t		ti_tcp_udp_cksum;
651 	uint16_t		ti_ip_cksum;
652 #endif
653 #if BYTE_ORDER == BIG_ENDIAN
654 	uint16_t		ti_error_flags;
655 	uint16_t		ti_vlan_tag;
656 #else
657 	uint16_t		ti_vlan_tag;
658 	uint16_t		ti_error_flags;
659 #endif
660 	uint32_t		ti_rsvd1;
661 	uint32_t		ti_opaque;
662 };
663 
664 #ifdef TI_SF_BUF_JUMBO
665 #define	TI_JUMBO_RX_RING_SZ	\
666 	(sizeof(struct ti_rx_desc_ext) * TI_JUMBO_RX_RING_CNT)
667 #else
668 #define	TI_JUMBO_RX_RING_SZ	\
669 	(sizeof(struct ti_rx_desc) * TI_JUMBO_RX_RING_CNT)
670 #endif
671 
672 /*
673  * Transmit descriptors are, mercifully, very small.
674  */
675 struct ti_tx_desc {
676 	ti_hostaddr		ti_addr;
677 #if BYTE_ORDER == BIG_ENDIAN
678 	uint16_t		ti_len;
679 	uint16_t		ti_flags;
680 #else
681 	uint16_t		ti_flags;
682 	uint16_t		ti_len;
683 #endif
684 #if BYTE_ORDER == BIG_ENDIAN
685 	uint16_t		ti_rsvd;
686 	uint16_t		ti_vlan_tag;
687 #else
688 	uint16_t		ti_vlan_tag;
689 	uint16_t		ti_rsvd;
690 #endif
691 };
692 
693 #define	TI_TX_RING_SZ		(sizeof(struct ti_tx_desc) * TI_TX_RING_CNT)
694 
695 /*
696  * NOTE!  On the Alpha, we have an alignment constraint.
697  * The first thing in the packet is a 14-byte Ethernet header.
698  * This means that the packet is misaligned.  To compensate,
699  * we actually offset the data 2 bytes into the cluster.  This
700  * aligns the packet after the Ethernet header at a 32-bit
701  * boundary.
702  */
703 
704 #define TI_FRAMELEN		1518
705 #define TI_JUMBO_FRAMELEN	9018
706 #define TI_JUMBO_MTU		(TI_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
707 #define TI_PAGE_SIZE		PAGE_SIZE
708 #define TI_MIN_FRAMELEN		60
709 
710 /*
711  * Buffer descriptor error flags.
712  */
713 #define TI_BDERR_CRC			0x0001
714 #define TI_BDERR_COLLDETECT		0x0002
715 #define TI_BDERR_LINKLOST		0x0004
716 #define TI_BDERR_DECODE			0x0008
717 #define TI_BDERR_ODD_NIBBLES		0x0010
718 #define TI_BDERR_MAC_ABRT		0x0020
719 #define TI_BDERR_RUNT			0x0040
720 #define TI_BDERR_TRUNC			0x0080
721 #define TI_BDERR_GIANT			0x0100
722 
723 /*
724  * Buffer descriptor flags.
725  */
726 #define TI_BDFLAG_TCP_UDP_CKSUM		0x0001
727 #define TI_BDFLAG_IP_CKSUM		0x0002
728 #define TI_BDFLAG_END			0x0004
729 #define TI_BDFLAG_MORE			0x0008
730 #define TI_BDFLAG_JUMBO_RING		0x0010
731 #define TI_BDFLAG_UCAST_PKT		0x0020
732 #define TI_BDFLAG_MCAST_PKT		0x0040
733 #define TI_BDFLAG_BCAST_PKT		0x0060
734 #define TI_BDFLAG_IP_FRAG		0x0080
735 #define TI_BDFLAG_IP_FRAG_END		0x0100
736 #define TI_BDFLAG_VLAN_TAG		0x0200
737 #define TI_BDFLAG_ERROR			0x0400
738 #define TI_BDFLAG_COAL_NOW		0x0800
739 #define	TI_BDFLAG_MINI_RING		0x1000
740 
741 /*
742  * Descriptor type flags. I think these only have meaning for
743  * the Tigon 1. I had to extract them from the sample driver source
744  * since they aren't in the manual.
745  */
746 #define TI_BDTYPE_TYPE_NULL			0x0000
747 #define TI_BDTYPE_SEND_BD			0x0001
748 #define TI_BDTYPE_RECV_BD			0x0002
749 #define TI_BDTYPE_RECV_JUMBO_BD			0x0003
750 #define TI_BDTYPE_RECV_BD_LAST			0x0004
751 #define TI_BDTYPE_SEND_DATA			0x0005
752 #define TI_BDTYPE_SEND_DATA_LAST		0x0006
753 #define TI_BDTYPE_RECV_DATA			0x0007
754 #define TI_BDTYPE_RECV_DATA_LAST		0x000b
755 #define TI_BDTYPE_EVENT_RUPT			0x000c
756 #define TI_BDTYPE_EVENT_NO_RUPT			0x000d
757 #define TI_BDTYPE_ODD_START			0x000e
758 #define TI_BDTYPE_UPDATE_STATS			0x000f
759 #define TI_BDTYPE_SEND_DUMMY_DMA		0x0010
760 #define TI_BDTYPE_EVENT_PROD			0x0011
761 #define TI_BDTYPE_TX_CONS			0x0012
762 #define TI_BDTYPE_RX_PROD			0x0013
763 #define TI_BDTYPE_REFRESH_STATS			0x0014
764 #define TI_BDTYPE_SEND_DATA_LAST_VLAN		0x0015
765 #define TI_BDTYPE_SEND_DATA_COAL		0x0016
766 #define TI_BDTYPE_SEND_DATA_LAST_COAL		0x0017
767 #define TI_BDTYPE_SEND_DATA_LAST_VLAN_COAL	0x0018
768 #define TI_BDTYPE_TX_CONS_NO_INTR		0x0019
769 
770 /*
771  * Tigon command structure.
772  */
773 struct ti_cmd_desc {
774 	uint32_t		ti_cmdx;
775 };
776 
777 #define TI_CMD_CMD(cmd)		(((((cmd)->ti_cmdx)) >> 24) & 0xff)
778 #define TI_CMD_CODE(cmd)	(((((cmd)->ti_cmdx)) >> 12) & 0xfff)
779 #define TI_CMD_IDX(cmd)		((((cmd)->ti_cmdx)) & 0xfff)
780 
781 #define TI_CMD_HOST_STATE		0x01
782 #define TI_CMD_CODE_STACK_UP		0x01
783 #define TI_CMD_CODE_STACK_DOWN		0x02
784 
785 /*
786  * This command enables software address filtering. It's a workaround
787  * for a bug in the Tigon 1 and not implemented for the Tigon 2.
788  */
789 #define TI_CMD_FDR_FILTERING		0x02
790 #define TI_CMD_CODE_FILT_ENB		0x01
791 #define TI_CMD_CODE_FILT_DIS		0x02
792 
793 #define TI_CMD_SET_RX_PROD_IDX		0x03 /* obsolete */
794 #define TI_CMD_UPDATE_GENCOM		0x04
795 #define TI_CMD_RESET_JUMBO_RING		0x05
796 #define TI_CMD_SET_PARTIAL_RX_CNT	0x06
797 #define TI_CMD_ADD_MCAST_ADDR		0x08 /* obsolete */
798 #define TI_CMD_DEL_MCAST_ADDR		0x09 /* obsolete */
799 
800 #define TI_CMD_SET_PROMISC_MODE		0x0A
801 #define TI_CMD_CODE_PROMISC_ENB		0x01
802 #define TI_CMD_CODE_PROMISC_DIS		0x02
803 
804 #define TI_CMD_LINK_NEGOTIATION		0x0B
805 #define TI_CMD_CODE_NEGOTIATE_BOTH	0x00
806 #define TI_CMD_CODE_NEGOTIATE_GIGABIT	0x01
807 #define TI_CMD_CODE_NEGOTIATE_10_100	0x02
808 
809 #define TI_CMD_SET_MAC_ADDR		0x0C
810 #define TI_CMD_CLR_PROFILE		0x0D
811 
812 #define TI_CMD_SET_ALLMULTI		0x0E
813 #define TI_CMD_CODE_ALLMULTI_ENB	0x01
814 #define TI_CMD_CODE_ALLMULTI_DIS	0x02
815 
816 #define TI_CMD_CLR_STATS		0x0F
817 #define TI_CMD_SET_RX_JUMBO_PROD_IDX	0x10 /* obsolete */
818 #define TI_CMD_RFRSH_STATS		0x11
819 
820 #define TI_CMD_EXT_ADD_MCAST		0x12
821 #define TI_CMD_EXT_DEL_MCAST		0x13
822 
823 /*
824  * Utility macros to make issuing commands a little simpler. Assumes
825  * that 'sc' and 'cmd' are in local scope.
826  */
827 #define TI_DO_CMD(x, y, z)	do {				\
828 	cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z)));	\
829 	ti_cmd(sc, &cmd);					\
830 } while(0)
831 
832 #define TI_DO_CMD_EXT(x, y, z, v, w)	do {			\
833 	cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z)));	\
834 	ti_cmd_ext(sc, &cmd, (v), (w));				\
835 } while(0)
836 
837 /*
838  * Other utility macros.
839  */
840 #define TI_INC(x, y)	(x) = ((x) + 1) % y
841 
842 #define TI_UPDATE_JUMBOPROD(x, y)	do {				\
843 	if ((x)->ti_hwrev == TI_HWREV_TIGON)				\
844 		TI_DO_CMD(TI_CMD_SET_RX_JUMBO_PROD_IDX, 0, (y));	\
845 	else								\
846 		CSR_WRITE_4((x), TI_MB_JUMBORXPROD_IDX, (y));		\
847 } while(0)
848 
849 #define TI_UPDATE_MINIPROD(x, y)					\
850 		CSR_WRITE_4((x), TI_MB_MINIRXPROD_IDX, (y))
851 
852 #define TI_UPDATE_STDPROD(x, y)		do {				\
853 	if ((x)->ti_hwrev == TI_HWREV_TIGON)				\
854 		TI_DO_CMD(TI_CMD_SET_RX_PROD_IDX, 0, (y));		\
855 	else								\
856 		CSR_WRITE_4((x), TI_MB_STDRXPROD_IDX, (y));		\
857 } while(0)
858 
859 /*
860  * Tigon event structure.
861  */
862 struct ti_event_desc {
863 	uint32_t		ti_eventx;
864 	uint32_t		ti_rsvd;
865 };
866 #define	TI_EVENT_RING_SZ	(sizeof(struct ti_event_desc) * TI_EVENT_RING_CNT)
867 
868 #define TI_EVENT_EVENT(e)	(((((e)->ti_eventx)) >> 24) & 0xff)
869 #define TI_EVENT_CODE(e)	(((((e)->ti_eventx)) >> 12) & 0xfff)
870 #define TI_EVENT_IDX(e)		(((((e)->ti_eventx))) & 0xfff)
871 
872 /*
873  * Tigon events.
874  */
875 #define TI_EV_FIRMWARE_UP		0x01
876 #define TI_EV_STATS_UPDATED		0x04
877 
878 #define TI_EV_LINKSTAT_CHANGED		0x06
879 #define TI_EV_CODE_GIG_LINK_UP		0x01
880 #define TI_EV_CODE_LINK_DOWN		0x02
881 #define TI_EV_CODE_LINK_UP		0x03
882 
883 #define TI_EV_ERROR			0x07
884 #define TI_EV_CODE_ERR_INVAL_CMD	0x01
885 #define TI_EV_CODE_ERR_UNIMP_CMD	0x02
886 #define TI_EV_CODE_ERR_BADCFG		0x03
887 
888 #define TI_EV_MCAST_UPDATED		0x08
889 #define TI_EV_CODE_MCAST_ADD		0x01
890 #define TI_EV_CODE_MCAST_DEL		0x02
891 
892 #define TI_EV_RESET_JUMBO_RING		0x09
893 /*
894  * Register access macros. The Tigon always uses memory mapped register
895  * accesses and all registers must be accessed with 32 bit operations.
896  */
897 
898 #define CSR_WRITE_4(sc, reg, val)	\
899 	bus_space_write_4((sc)->ti_btag, (sc)->ti_bhandle, (reg), (val))
900 
901 #define CSR_READ_4(sc, reg)		\
902 	bus_space_read_4((sc)->ti_btag, (sc)->ti_bhandle, (reg))
903 
904 #define TI_SETBIT(sc, reg, x)	\
905 	CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) | (x)))
906 #define TI_CLRBIT(sc, reg, x)	\
907 	CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) & ~(x)))
908 
909 struct ti_txdesc {
910 	struct mbuf	*tx_m;
911 	bus_dmamap_t	tx_dmamap;
912 	STAILQ_ENTRY(ti_txdesc) tx_q;
913 };
914 
915 STAILQ_HEAD(ti_txdq, ti_txdesc);
916 
917 struct ti_status {
918 	/*
919 	 * Make sure producer structures are aligned on 32-byte cache
920 	 * line boundaries.  We can create separate DMA area for each
921 	 * producer/consumer area but it wouldn't get much benefit
922 	 * since driver use a global driver lock.
923 	 */
924 	struct ti_producer	ti_ev_prodidx_r;
925 	uint32_t		ti_pad0[6];
926 	struct ti_producer	ti_return_prodidx_r;
927 	uint32_t		ti_pad1[6];
928 	struct ti_producer	ti_tx_considx_r;
929 	uint32_t		ti_pad2[6];
930 };
931 
932 /*
933  * Ring structures. Most of these reside in host memory and we tell
934  * the NIC where they are via the ring control blocks. The exceptions
935  * are the tx and command rings, which live in NIC memory and which
936  * we access via the shared memory window.
937  */
938 struct ti_ring_data {
939 	struct ti_gib		*ti_info;
940 	bus_addr_t		ti_info_paddr;
941 	struct ti_status	*ti_status;
942 	bus_addr_t		ti_status_paddr;
943 	struct ti_rx_desc	*ti_rx_std_ring;
944 	bus_addr_t		ti_rx_std_ring_paddr;
945 #ifdef TI_SF_BUF_JUMBO
946 	struct ti_rx_desc_ext	*ti_rx_jumbo_ring;
947 #else
948 	struct ti_rx_desc	*ti_rx_jumbo_ring;
949 #endif
950 	bus_addr_t		ti_rx_jumbo_ring_paddr;
951 	struct ti_rx_desc	*ti_rx_mini_ring;
952 	bus_addr_t		ti_rx_mini_ring_paddr;
953 	struct ti_rx_desc	*ti_rx_return_ring;
954 	bus_addr_t		ti_rx_return_ring_paddr;
955 	struct ti_event_desc	*ti_event_ring;
956 	bus_addr_t		ti_event_ring_paddr;
957 	struct ti_tx_desc	*ti_tx_ring;
958 	bus_addr_t		ti_tx_ring_paddr;
959 };
960 
961 /*
962  * Mbuf pointers. We need these to keep track of the virtual addresses
963  * of our mbuf chains since we can only convert from physical to virtual,
964  * not the other way around.
965  */
966 struct ti_chain_data {
967 	bus_dma_tag_t		ti_parent_tag;
968 	bus_dma_tag_t		ti_gib_tag;
969 	bus_dmamap_t		ti_gib_map;
970 	bus_dma_tag_t		ti_event_ring_tag;
971 	bus_dmamap_t		ti_event_ring_map;
972 	bus_dma_tag_t		ti_status_tag;
973 	bus_dmamap_t		ti_status_map;
974 	bus_dma_tag_t		ti_tx_ring_tag;
975 	bus_dmamap_t		ti_tx_ring_map;
976 	bus_dma_tag_t		ti_tx_tag;
977 	struct ti_txdesc	ti_txdesc[TI_TX_RING_CNT];
978 	struct ti_txdq		ti_txfreeq;
979 	struct ti_txdq		ti_txbusyq;
980 	bus_dma_tag_t		ti_rx_return_ring_tag;
981 	bus_dmamap_t		ti_rx_return_ring_map;
982 	bus_dma_tag_t		ti_rx_std_ring_tag;
983 	bus_dmamap_t		ti_rx_std_ring_map;
984 	bus_dma_tag_t		ti_rx_std_tag;
985 	struct mbuf		*ti_rx_std_chain[TI_STD_RX_RING_CNT];
986 	bus_dmamap_t		ti_rx_std_maps[TI_STD_RX_RING_CNT];
987 	bus_dmamap_t		ti_rx_std_sparemap;
988 	bus_dma_tag_t		ti_rx_jumbo_ring_tag;
989 	bus_dmamap_t		ti_rx_jumbo_ring_map;
990 	bus_dma_tag_t		ti_rx_jumbo_tag;
991 	struct mbuf		*ti_rx_jumbo_chain[TI_JUMBO_RX_RING_CNT];
992 	bus_dmamap_t		ti_rx_jumbo_maps[TI_JUMBO_RX_RING_CNT];
993 	bus_dmamap_t		ti_rx_jumbo_sparemap;
994 	bus_dma_tag_t		ti_rx_mini_ring_tag;
995 	bus_dmamap_t		ti_rx_mini_ring_map;
996 	bus_dma_tag_t		ti_rx_mini_tag;
997 	struct mbuf		*ti_rx_mini_chain[TI_MINI_RX_RING_CNT];
998 	bus_dmamap_t		ti_rx_mini_maps[TI_MINI_RX_RING_CNT];
999 	bus_dmamap_t		ti_rx_mini_sparemap;
1000 };
1001 
1002 struct ti_type {
1003 	uint16_t		ti_vid;
1004 	uint16_t		ti_did;
1005 	const char		*ti_name;
1006 };
1007 
1008 #define TI_HWREV_TIGON		0x01
1009 #define TI_HWREV_TIGON_II	0x02
1010 #define TI_TIMEOUT		1000
1011 #define TI_TXCONS_UNSET		0xFFFF	/* impossible value */
1012 
1013 struct ti_mc_entry {
1014 	struct ether_addr		mc_addr;
1015 	SLIST_ENTRY(ti_mc_entry)	mc_entries;
1016 };
1017 
1018 typedef enum {
1019 	TI_FLAG_NONE		= 0x00,
1020 	TI_FLAG_DEBUGING	= 0x01,
1021 	TI_FLAG_WAIT_FOR_LINK	= 0x02
1022 } ti_flag_vals;
1023 
1024 struct ti_softc {
1025 	device_t		ti_dev;
1026 	struct ifnet		*ti_ifp;
1027 	bus_space_handle_t	ti_bhandle;
1028 	bus_space_tag_t		ti_btag;
1029 	void			*ti_intrhand;
1030 	struct resource		*ti_irq;
1031 	struct resource		*ti_res;
1032 	struct ifmedia		ifmedia;	/* media info */
1033 	uint8_t			ti_hwrev;	/* Tigon rev (1 or 2) */
1034 	uint8_t			ti_copper;	/* 1000baseTX card */
1035 	uint8_t			ti_linkstat;	/* Link state */
1036 	int			ti_hdrsplit;	/* enable header splitting */
1037 	int			ti_dac;
1038 	struct ti_ring_data	ti_rdata;	/* rings */
1039 	struct ti_chain_data	ti_cdata;	/* mbufs */
1040 #define ti_ev_prodidx		ti_rdata.ti_status->ti_ev_prodidx_r
1041 #define ti_return_prodidx	ti_rdata.ti_status->ti_return_prodidx_r
1042 #define ti_tx_considx		ti_rdata.ti_status->ti_tx_considx_r
1043 	int			ti_tx_saved_prodidx;
1044 	int			ti_tx_saved_considx;
1045 	int			ti_rx_saved_considx;
1046 	int			ti_ev_saved_considx;
1047 	int			ti_cmd_saved_prodidx;
1048 	int			ti_std;		/* current std ring head */
1049 	int			ti_mini;	/* current mini ring head */
1050 	int			ti_jumbo;	/* current jumo ring head */
1051 	SLIST_HEAD(__ti_mchead, ti_mc_entry)	ti_mc_listhead;
1052 	uint32_t		ti_stat_ticks;
1053 	uint32_t		ti_rx_coal_ticks;
1054 	uint32_t		ti_tx_coal_ticks;
1055 	uint32_t		ti_rx_max_coal_bds;
1056 	uint32_t		ti_tx_max_coal_bds;
1057 	uint32_t		ti_tx_buf_ratio;
1058 	int			ti_if_flags;
1059 	int			ti_txcnt;
1060 	struct mtx		ti_mtx;
1061 	struct callout		ti_watchdog;
1062 	int			ti_timer;
1063 	ti_flag_vals		ti_flags;
1064 	uint8_t			*ti_membuf;
1065 	uint8_t			*ti_membuf2;
1066 	struct cdev		 *dev;
1067 };
1068 
1069 #define	TI_LOCK(_sc)		mtx_lock(&(_sc)->ti_mtx)
1070 #define	TI_UNLOCK(_sc)		mtx_unlock(&(_sc)->ti_mtx)
1071 #define	TI_LOCK_ASSERT(_sc)	mtx_assert(&(_sc)->ti_mtx, MA_OWNED)
1072 
1073 /*
1074  * Microchip Technology 24Cxx EEPROM control bytes
1075  */
1076 #define EEPROM_CTL_READ			0xA1	/* 0101 0001 */
1077 #define EEPROM_CTL_WRITE		0xA0	/* 0101 0000 */
1078 
1079 /*
1080  * Note that EEPROM_START leaves transmission enabled.
1081  */
1082 #define EEPROM_START	do {							\
1083 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock pin high */\
1084 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Set DATA bit to 1 */	\
1085 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit to write bit */\
1086 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA bit to 0 again */\
1087 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */	\
1088 } while(0)
1089 
1090 /*
1091  * EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so
1092  * that no further data can be written to the EEPROM I/O pin.
1093  */
1094 #define EEPROM_STOP	do {							\
1095 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit */	\
1096 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA to 0 */	\
1097 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock high */	\
1098 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit */	\
1099 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Toggle DATA to 1 */	\
1100 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit. */	\
1101 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */	\
1102 } while(0)
1103