xref: /freebsd/sys/dev/ti/if_ti.c (revision 66e576525d35c68fcb86f142ebaa5a448555c0c7)
1 /*-
2  * Copyright (c) 1997, 1998, 1999
3  *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by Bill Paul.
16  * 4. Neither the name of the author nor the names of any co-contributors
17  *    may be used to endorse or promote products derived from this software
18  *    without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30  * THE POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 /*
34  * Alteon Networks Tigon PCI gigabit ethernet driver for FreeBSD.
35  * Manuals, sample driver and firmware source kits are available
36  * from http://www.alteon.com/support/openkits.
37  *
38  * Written by Bill Paul <wpaul@ctr.columbia.edu>
39  * Electrical Engineering Department
40  * Columbia University, New York City
41  */
42 
43 /*
44  * The Alteon Networks Tigon chip contains an embedded R4000 CPU,
45  * gigabit MAC, dual DMA channels and a PCI interface unit. NICs
46  * using the Tigon may have anywhere from 512K to 2MB of SRAM. The
47  * Tigon supports hardware IP, TCP and UCP checksumming, multicast
48  * filtering and jumbo (9014 byte) frames. The hardware is largely
49  * controlled by firmware, which must be loaded into the NIC during
50  * initialization.
51  *
52  * The Tigon 2 contains 2 R4000 CPUs and requires a newer firmware
53  * revision, which supports new features such as extended commands,
54  * extended jumbo receive ring desciptors and a mini receive ring.
55  *
56  * Alteon Networks is to be commended for releasing such a vast amount
57  * of development material for the Tigon NIC without requiring an NDA
58  * (although they really should have done it a long time ago). With
59  * any luck, the other vendors will finally wise up and follow Alteon's
60  * stellar example.
61  *
62  * The firmware for the Tigon 1 and 2 NICs is compiled directly into
63  * this driver by #including it as a C header file. This bloats the
64  * driver somewhat, but it's the easiest method considering that the
65  * driver code and firmware code need to be kept in sync. The source
66  * for the firmware is not provided with the FreeBSD distribution since
67  * compiling it requires a GNU toolchain targeted for mips-sgi-irix5.3.
68  *
69  * The following people deserve special thanks:
70  * - Terry Murphy of 3Com, for providing a 3c985 Tigon 1 board
71  *   for testing
72  * - Raymond Lee of Netgear, for providing a pair of Netgear
73  *   GA620 Tigon 2 boards for testing
74  * - Ulf Zimmermann, for bringing the GA260 to my attention and
75  *   convincing me to write this driver.
76  * - Andrew Gallatin for providing FreeBSD/Alpha support.
77  */
78 
79 #include <sys/cdefs.h>
80 __FBSDID("$FreeBSD$");
81 
82 #include "opt_ti.h"
83 
84 #include <sys/param.h>
85 #include <sys/systm.h>
86 #include <sys/sockio.h>
87 #include <sys/mbuf.h>
88 #include <sys/malloc.h>
89 #include <sys/kernel.h>
90 #include <sys/module.h>
91 #include <sys/socket.h>
92 #include <sys/queue.h>
93 #include <sys/conf.h>
94 #include <sys/sf_buf.h>
95 
96 #include <net/if.h>
97 #include <net/if_arp.h>
98 #include <net/ethernet.h>
99 #include <net/if_dl.h>
100 #include <net/if_media.h>
101 #include <net/if_types.h>
102 #include <net/if_vlan_var.h>
103 
104 #include <net/bpf.h>
105 
106 #include <netinet/in_systm.h>
107 #include <netinet/in.h>
108 #include <netinet/ip.h>
109 
110 #include <machine/bus.h>
111 #include <machine/resource.h>
112 #include <sys/bus.h>
113 #include <sys/rman.h>
114 
115 /* #define TI_PRIVATE_JUMBOS */
116 #ifndef TI_PRIVATE_JUMBOS
117 #include <vm/vm.h>
118 #include <vm/vm_page.h>
119 #endif
120 
121 #include <dev/pci/pcireg.h>
122 #include <dev/pci/pcivar.h>
123 
124 #include <sys/tiio.h>
125 #include <dev/ti/if_tireg.h>
126 #include <dev/ti/ti_fw.h>
127 #include <dev/ti/ti_fw2.h>
128 
129 #define TI_CSUM_FEATURES	(CSUM_IP | CSUM_TCP | CSUM_UDP | CSUM_IP_FRAGS)
130 /*
131  * We can only turn on header splitting if we're using extended receive
132  * BDs.
133  */
134 #if defined(TI_JUMBO_HDRSPLIT) && defined(TI_PRIVATE_JUMBOS)
135 #error "options TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS are mutually exclusive"
136 #endif /* TI_JUMBO_HDRSPLIT && TI_JUMBO_HDRSPLIT */
137 
138 typedef enum {
139 	TI_SWAP_HTON,
140 	TI_SWAP_NTOH
141 } ti_swap_type;
142 
143 
144 /*
145  * Various supported device vendors/types and their names.
146  */
147 
148 static struct ti_type ti_devs[] = {
149 	{ ALT_VENDORID,	ALT_DEVICEID_ACENIC,
150 		"Alteon AceNIC 1000baseSX Gigabit Ethernet" },
151 	{ ALT_VENDORID,	ALT_DEVICEID_ACENIC_COPPER,
152 		"Alteon AceNIC 1000baseT Gigabit Ethernet" },
153 	{ TC_VENDORID,	TC_DEVICEID_3C985,
154 		"3Com 3c985-SX Gigabit Ethernet" },
155 	{ NG_VENDORID, NG_DEVICEID_GA620,
156 		"Netgear GA620 1000baseSX Gigabit Ethernet" },
157 	{ NG_VENDORID, NG_DEVICEID_GA620T,
158 		"Netgear GA620 1000baseT Gigabit Ethernet" },
159 	{ SGI_VENDORID, SGI_DEVICEID_TIGON,
160 		"Silicon Graphics Gigabit Ethernet" },
161 	{ DEC_VENDORID, DEC_DEVICEID_FARALLON_PN9000SX,
162 		"Farallon PN9000SX Gigabit Ethernet" },
163 	{ 0, 0, NULL }
164 };
165 
166 
167 static	d_open_t	ti_open;
168 static	d_close_t	ti_close;
169 static	d_ioctl_t	ti_ioctl2;
170 
171 static struct cdevsw ti_cdevsw = {
172 	.d_version =	D_VERSION,
173 	.d_flags =	0,
174 	.d_open =	ti_open,
175 	.d_close =	ti_close,
176 	.d_ioctl =	ti_ioctl2,
177 	.d_name =	"ti",
178 };
179 
180 static int ti_probe(device_t);
181 static int ti_attach(device_t);
182 static int ti_detach(device_t);
183 static void ti_txeof(struct ti_softc *);
184 static void ti_rxeof(struct ti_softc *);
185 
186 static void ti_stats_update(struct ti_softc *);
187 static int ti_encap(struct ti_softc *, struct mbuf **);
188 
189 static void ti_intr(void *);
190 static void ti_start(struct ifnet *);
191 static void ti_start_locked(struct ifnet *);
192 static int ti_ioctl(struct ifnet *, u_long, caddr_t);
193 static void ti_init(void *);
194 static void ti_init_locked(void *);
195 static void ti_init2(struct ti_softc *);
196 static void ti_stop(struct ti_softc *);
197 static void ti_watchdog(void *);
198 static int ti_shutdown(device_t);
199 static int ti_ifmedia_upd(struct ifnet *);
200 static void ti_ifmedia_sts(struct ifnet *, struct ifmediareq *);
201 
202 static u_int32_t ti_eeprom_putbyte(struct ti_softc *, int);
203 static u_int8_t	ti_eeprom_getbyte(struct ti_softc *, int, u_int8_t *);
204 static int ti_read_eeprom(struct ti_softc *, caddr_t, int, int);
205 
206 static void ti_add_mcast(struct ti_softc *, struct ether_addr *);
207 static void ti_del_mcast(struct ti_softc *, struct ether_addr *);
208 static void ti_setmulti(struct ti_softc *);
209 
210 static void ti_mem_read(struct ti_softc *, u_int32_t, u_int32_t, void *);
211 static void ti_mem_write(struct ti_softc *, u_int32_t, u_int32_t, void *);
212 static void ti_mem_zero(struct ti_softc *, u_int32_t, u_int32_t);
213 static int ti_copy_mem(struct ti_softc *, u_int32_t, u_int32_t, caddr_t, int, int);
214 static int ti_copy_scratch(struct ti_softc *, u_int32_t, u_int32_t, caddr_t,
215 		int, int, int);
216 static int ti_bcopy_swap(const void *, void *, size_t, ti_swap_type);
217 static void ti_loadfw(struct ti_softc *);
218 static void ti_cmd(struct ti_softc *, struct ti_cmd_desc *);
219 static void ti_cmd_ext(struct ti_softc *, struct ti_cmd_desc *, caddr_t, int);
220 static void ti_handle_events(struct ti_softc *);
221 static int ti_alloc_dmamaps(struct ti_softc *);
222 static void ti_free_dmamaps(struct ti_softc *);
223 static int ti_alloc_jumbo_mem(struct ti_softc *);
224 #ifdef TI_PRIVATE_JUMBOS
225 static void *ti_jalloc(struct ti_softc *);
226 static void ti_jfree(void *, void *);
227 #endif /* TI_PRIVATE_JUMBOS */
228 static int ti_newbuf_std(struct ti_softc *, int, struct mbuf *);
229 static int ti_newbuf_mini(struct ti_softc *, int, struct mbuf *);
230 static int ti_newbuf_jumbo(struct ti_softc *, int, struct mbuf *);
231 static int ti_init_rx_ring_std(struct ti_softc *);
232 static void ti_free_rx_ring_std(struct ti_softc *);
233 static int ti_init_rx_ring_jumbo(struct ti_softc *);
234 static void ti_free_rx_ring_jumbo(struct ti_softc *);
235 static int ti_init_rx_ring_mini(struct ti_softc *);
236 static void ti_free_rx_ring_mini(struct ti_softc *);
237 static void ti_free_tx_ring(struct ti_softc *);
238 static int ti_init_tx_ring(struct ti_softc *);
239 
240 static int ti_64bitslot_war(struct ti_softc *);
241 static int ti_chipinit(struct ti_softc *);
242 static int ti_gibinit(struct ti_softc *);
243 
244 #ifdef TI_JUMBO_HDRSPLIT
245 static __inline void ti_hdr_split	(struct mbuf *top, int hdr_len,
246 					     int pkt_len, int idx);
247 #endif /* TI_JUMBO_HDRSPLIT */
248 
249 static device_method_t ti_methods[] = {
250 	/* Device interface */
251 	DEVMETHOD(device_probe,		ti_probe),
252 	DEVMETHOD(device_attach,	ti_attach),
253 	DEVMETHOD(device_detach,	ti_detach),
254 	DEVMETHOD(device_shutdown,	ti_shutdown),
255 	{ 0, 0 }
256 };
257 
258 static driver_t ti_driver = {
259 	"ti",
260 	ti_methods,
261 	sizeof(struct ti_softc)
262 };
263 
264 static devclass_t ti_devclass;
265 
266 DRIVER_MODULE(ti, pci, ti_driver, ti_devclass, 0, 0);
267 MODULE_DEPEND(ti, pci, 1, 1, 1);
268 MODULE_DEPEND(ti, ether, 1, 1, 1);
269 
270 /*
271  * Send an instruction or address to the EEPROM, check for ACK.
272  */
273 static u_int32_t ti_eeprom_putbyte(sc, byte)
274 	struct ti_softc		*sc;
275 	int			byte;
276 {
277 	int			i, ack = 0;
278 
279 	/*
280 	 * Make sure we're in TX mode.
281 	 */
282 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
283 
284 	/*
285 	 * Feed in each bit and stobe the clock.
286 	 */
287 	for (i = 0x80; i; i >>= 1) {
288 		if (byte & i) {
289 			TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
290 		} else {
291 			TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
292 		}
293 		DELAY(1);
294 		TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
295 		DELAY(1);
296 		TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
297 	}
298 
299 	/*
300 	 * Turn off TX mode.
301 	 */
302 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
303 
304 	/*
305 	 * Check for ack.
306 	 */
307 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
308 	ack = CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN;
309 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
310 
311 	return (ack);
312 }
313 
314 /*
315  * Read a byte of data stored in the EEPROM at address 'addr.'
316  * We have to send two address bytes since the EEPROM can hold
317  * more than 256 bytes of data.
318  */
319 static u_int8_t ti_eeprom_getbyte(sc, addr, dest)
320 	struct ti_softc		*sc;
321 	int			addr;
322 	u_int8_t		*dest;
323 {
324 	int			i;
325 	u_int8_t		byte = 0;
326 
327 	EEPROM_START;
328 
329 	/*
330 	 * Send write control code to EEPROM.
331 	 */
332 	if (ti_eeprom_putbyte(sc, EEPROM_CTL_WRITE)) {
333 		device_printf(sc->ti_dev,
334 		    "failed to send write command, status: %x\n",
335 		    CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
336 		return (1);
337 	}
338 
339 	/*
340 	 * Send first byte of address of byte we want to read.
341 	 */
342 	if (ti_eeprom_putbyte(sc, (addr >> 8) & 0xFF)) {
343 		device_printf(sc->ti_dev, "failed to send address, status: %x\n",
344 		    CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
345 		return (1);
346 	}
347 	/*
348 	 * Send second byte address of byte we want to read.
349 	 */
350 	if (ti_eeprom_putbyte(sc, addr & 0xFF)) {
351 		device_printf(sc->ti_dev, "failed to send address, status: %x\n",
352 		    CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
353 		return (1);
354 	}
355 
356 	EEPROM_STOP;
357 	EEPROM_START;
358 	/*
359 	 * Send read control code to EEPROM.
360 	 */
361 	if (ti_eeprom_putbyte(sc, EEPROM_CTL_READ)) {
362 		device_printf(sc->ti_dev,
363 		    "failed to send read command, status: %x\n",
364 		    CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
365 		return (1);
366 	}
367 
368 	/*
369 	 * Start reading bits from EEPROM.
370 	 */
371 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
372 	for (i = 0x80; i; i >>= 1) {
373 		TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
374 		DELAY(1);
375 		if (CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN)
376 			byte |= i;
377 		TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
378 		DELAY(1);
379 	}
380 
381 	EEPROM_STOP;
382 
383 	/*
384 	 * No ACK generated for read, so just return byte.
385 	 */
386 
387 	*dest = byte;
388 
389 	return (0);
390 }
391 
392 /*
393  * Read a sequence of bytes from the EEPROM.
394  */
395 static int
396 ti_read_eeprom(sc, dest, off, cnt)
397 	struct ti_softc		*sc;
398 	caddr_t			dest;
399 	int			off;
400 	int			cnt;
401 {
402 	int			err = 0, i;
403 	u_int8_t		byte = 0;
404 
405 	for (i = 0; i < cnt; i++) {
406 		err = ti_eeprom_getbyte(sc, off + i, &byte);
407 		if (err)
408 			break;
409 		*(dest + i) = byte;
410 	}
411 
412 	return (err ? 1 : 0);
413 }
414 
415 /*
416  * NIC memory read function.
417  * Can be used to copy data from NIC local memory.
418  */
419 static void
420 ti_mem_read(sc, addr, len, buf)
421 	struct ti_softc		*sc;
422 	u_int32_t		addr, len;
423 	void			*buf;
424 {
425 	int			segptr, segsize, cnt;
426 	char			*ptr;
427 
428 	segptr = addr;
429 	cnt = len;
430 	ptr = buf;
431 
432 	while (cnt) {
433 		if (cnt < TI_WINLEN)
434 			segsize = cnt;
435 		else
436 			segsize = TI_WINLEN - (segptr % TI_WINLEN);
437 		CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
438 		bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
439 		    TI_WINDOW + (segptr & (TI_WINLEN - 1)), (u_int32_t *)ptr,
440 		    segsize / 4);
441 		ptr += segsize;
442 		segptr += segsize;
443 		cnt -= segsize;
444 	}
445 }
446 
447 
448 /*
449  * NIC memory write function.
450  * Can be used to copy data into NIC local memory.
451  */
452 static void
453 ti_mem_write(sc, addr, len, buf)
454 	struct ti_softc		*sc;
455 	u_int32_t		addr, len;
456 	void			*buf;
457 {
458 	int			segptr, segsize, cnt;
459 	char			*ptr;
460 
461 	segptr = addr;
462 	cnt = len;
463 	ptr = buf;
464 
465 	while (cnt) {
466 		if (cnt < TI_WINLEN)
467 			segsize = cnt;
468 		else
469 			segsize = TI_WINLEN - (segptr % TI_WINLEN);
470 		CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
471 		bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
472 		    TI_WINDOW + (segptr & (TI_WINLEN - 1)), (u_int32_t *)ptr,
473 		    segsize / 4);
474 		ptr += segsize;
475 		segptr += segsize;
476 		cnt -= segsize;
477 	}
478 }
479 
480 /*
481  * NIC memory read function.
482  * Can be used to clear a section of NIC local memory.
483  */
484 static void
485 ti_mem_zero(sc, addr, len)
486 	struct ti_softc		*sc;
487 	u_int32_t		addr, len;
488 {
489 	int			segptr, segsize, cnt;
490 
491 	segptr = addr;
492 	cnt = len;
493 
494 	while (cnt) {
495 		if (cnt < TI_WINLEN)
496 			segsize = cnt;
497 		else
498 			segsize = TI_WINLEN - (segptr % TI_WINLEN);
499 		CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
500 		bus_space_set_region_4(sc->ti_btag, sc->ti_bhandle,
501 		    TI_WINDOW + (segptr & (TI_WINLEN - 1)), 0, segsize / 4);
502 		segptr += segsize;
503 		cnt -= segsize;
504 	}
505 }
506 
507 static int
508 ti_copy_mem(sc, tigon_addr, len, buf, useraddr, readdata)
509 	struct ti_softc		*sc;
510 	u_int32_t		tigon_addr, len;
511 	caddr_t			buf;
512 	int			useraddr, readdata;
513 {
514 	int		segptr, segsize, cnt;
515 	caddr_t		ptr;
516 	u_int32_t	origwin;
517 	u_int8_t	tmparray[TI_WINLEN], tmparray2[TI_WINLEN];
518 	int		resid, segresid;
519 	int		first_pass;
520 
521 	TI_LOCK_ASSERT(sc);
522 
523 	/*
524 	 * At the moment, we don't handle non-aligned cases, we just bail.
525 	 * If this proves to be a problem, it will be fixed.
526 	 */
527 	if ((readdata == 0)
528 	 && (tigon_addr & 0x3)) {
529 		device_printf(sc->ti_dev, "%s: tigon address %#x isn't "
530 		    "word-aligned\n", __func__, tigon_addr);
531 		device_printf(sc->ti_dev, "%s: unaligned writes aren't "
532 		    "yet supported\n", __func__);
533 		return (EINVAL);
534 	}
535 
536 	segptr = tigon_addr & ~0x3;
537 	segresid = tigon_addr - segptr;
538 
539 	/*
540 	 * This is the non-aligned amount left over that we'll need to
541 	 * copy.
542 	 */
543 	resid = len & 0x3;
544 
545 	/* Add in the left over amount at the front of the buffer */
546 	resid += segresid;
547 
548 	cnt = len & ~0x3;
549 	/*
550 	 * If resid + segresid is >= 4, add multiples of 4 to the count and
551 	 * decrease the residual by that much.
552 	 */
553 	cnt += resid & ~0x3;
554 	resid -= resid & ~0x3;
555 
556 	ptr = buf;
557 
558 	first_pass = 1;
559 
560 	/*
561 	 * Save the old window base value.
562 	 */
563 	origwin = CSR_READ_4(sc, TI_WINBASE);
564 
565 	while (cnt) {
566 		bus_size_t ti_offset;
567 
568 		if (cnt < TI_WINLEN)
569 			segsize = cnt;
570 		else
571 			segsize = TI_WINLEN - (segptr % TI_WINLEN);
572 		CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
573 
574 		ti_offset = TI_WINDOW + (segptr & (TI_WINLEN -1));
575 
576 		if (readdata) {
577 
578 			bus_space_read_region_4(sc->ti_btag,
579 						sc->ti_bhandle, ti_offset,
580 						(u_int32_t *)tmparray,
581 						segsize >> 2);
582 			if (useraddr) {
583 				/*
584 				 * Yeah, this is a little on the kludgy
585 				 * side, but at least this code is only
586 				 * used for debugging.
587 				 */
588 				ti_bcopy_swap(tmparray, tmparray2, segsize,
589 					      TI_SWAP_NTOH);
590 
591 				TI_UNLOCK(sc);
592 				if (first_pass) {
593 					copyout(&tmparray2[segresid], ptr,
594 						segsize - segresid);
595 					first_pass = 0;
596 				} else
597 					copyout(tmparray2, ptr, segsize);
598 				TI_LOCK(sc);
599 			} else {
600 				if (first_pass) {
601 
602 					ti_bcopy_swap(tmparray, tmparray2,
603 						      segsize, TI_SWAP_NTOH);
604 					TI_UNLOCK(sc);
605 					bcopy(&tmparray2[segresid], ptr,
606 					      segsize - segresid);
607 					TI_LOCK(sc);
608 					first_pass = 0;
609 				} else
610 					ti_bcopy_swap(tmparray, ptr, segsize,
611 						      TI_SWAP_NTOH);
612 			}
613 
614 		} else {
615 			if (useraddr) {
616 				TI_UNLOCK(sc);
617 				copyin(ptr, tmparray2, segsize);
618 				TI_LOCK(sc);
619 				ti_bcopy_swap(tmparray2, tmparray, segsize,
620 					      TI_SWAP_HTON);
621 			} else
622 				ti_bcopy_swap(ptr, tmparray, segsize,
623 					      TI_SWAP_HTON);
624 
625 			bus_space_write_region_4(sc->ti_btag,
626 						 sc->ti_bhandle, ti_offset,
627 						 (u_int32_t *)tmparray,
628 						 segsize >> 2);
629 		}
630 		segptr += segsize;
631 		ptr += segsize;
632 		cnt -= segsize;
633 	}
634 
635 	/*
636 	 * Handle leftover, non-word-aligned bytes.
637 	 */
638 	if (resid != 0) {
639 		u_int32_t	tmpval, tmpval2;
640 		bus_size_t	ti_offset;
641 
642 		/*
643 		 * Set the segment pointer.
644 		 */
645 		CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
646 
647 		ti_offset = TI_WINDOW + (segptr & (TI_WINLEN - 1));
648 
649 		/*
650 		 * First, grab whatever is in our source/destination.
651 		 * We'll obviously need this for reads, but also for
652 		 * writes, since we'll be doing read/modify/write.
653 		 */
654 		bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
655 					ti_offset, &tmpval, 1);
656 
657 		/*
658 		 * Next, translate this from little-endian to big-endian
659 		 * (at least on i386 boxes).
660 		 */
661 		tmpval2 = ntohl(tmpval);
662 
663 		if (readdata) {
664 			/*
665 			 * If we're reading, just copy the leftover number
666 			 * of bytes from the host byte order buffer to
667 			 * the user's buffer.
668 			 */
669 			if (useraddr) {
670 				TI_UNLOCK(sc);
671 				copyout(&tmpval2, ptr, resid);
672 				TI_LOCK(sc);
673 			} else
674 				bcopy(&tmpval2, ptr, resid);
675 		} else {
676 			/*
677 			 * If we're writing, first copy the bytes to be
678 			 * written into the network byte order buffer,
679 			 * leaving the rest of the buffer with whatever was
680 			 * originally in there.  Then, swap the bytes
681 			 * around into host order and write them out.
682 			 *
683 			 * XXX KDM the read side of this has been verified
684 			 * to work, but the write side of it has not been
685 			 * verified.  So user beware.
686 			 */
687 			if (useraddr) {
688 				TI_UNLOCK(sc);
689 				copyin(ptr, &tmpval2, resid);
690 				TI_LOCK(sc);
691 			} else
692 				bcopy(ptr, &tmpval2, resid);
693 
694 			tmpval = htonl(tmpval2);
695 
696 			bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
697 						 ti_offset, &tmpval, 1);
698 		}
699 	}
700 
701 	CSR_WRITE_4(sc, TI_WINBASE, origwin);
702 
703 	return (0);
704 }
705 
706 static int
707 ti_copy_scratch(sc, tigon_addr, len, buf, useraddr, readdata, cpu)
708 	struct ti_softc		*sc;
709 	u_int32_t		tigon_addr, len;
710 	caddr_t			buf;
711 	int			useraddr, readdata;
712 	int			cpu;
713 {
714 	u_int32_t	segptr;
715 	int		cnt;
716 	u_int32_t	tmpval, tmpval2;
717 	caddr_t		ptr;
718 
719 	TI_LOCK_ASSERT(sc);
720 
721 	/*
722 	 * At the moment, we don't handle non-aligned cases, we just bail.
723 	 * If this proves to be a problem, it will be fixed.
724 	 */
725 	if (tigon_addr & 0x3) {
726 		device_printf(sc->ti_dev, "%s: tigon address %#x "
727 		    "isn't word-aligned\n", __func__, tigon_addr);
728 		return (EINVAL);
729 	}
730 
731 	if (len & 0x3) {
732 		device_printf(sc->ti_dev, "%s: transfer length %d "
733 		    "isn't word-aligned\n", __func__, len);
734 		return (EINVAL);
735 	}
736 
737 	segptr = tigon_addr;
738 	cnt = len;
739 	ptr = buf;
740 
741 	while (cnt) {
742 		CSR_WRITE_4(sc, CPU_REG(TI_SRAM_ADDR, cpu), segptr);
743 
744 		if (readdata) {
745 			tmpval2 = CSR_READ_4(sc, CPU_REG(TI_SRAM_DATA, cpu));
746 
747 			tmpval = ntohl(tmpval2);
748 
749 			/*
750 			 * Note:  I've used this debugging interface
751 			 * extensively with Alteon's 12.3.15 firmware,
752 			 * compiled with GCC 2.7.2.1 and binutils 2.9.1.
753 			 *
754 			 * When you compile the firmware without
755 			 * optimization, which is necessary sometimes in
756 			 * order to properly step through it, you sometimes
757 			 * read out a bogus value of 0xc0017c instead of
758 			 * whatever was supposed to be in that scratchpad
759 			 * location.  That value is on the stack somewhere,
760 			 * but I've never been able to figure out what was
761 			 * causing the problem.
762 			 *
763 			 * The address seems to pop up in random places,
764 			 * often not in the same place on two subsequent
765 			 * reads.
766 			 *
767 			 * In any case, the underlying data doesn't seem
768 			 * to be affected, just the value read out.
769 			 *
770 			 * KDM, 3/7/2000
771 			 */
772 
773 			if (tmpval2 == 0xc0017c)
774 				device_printf(sc->ti_dev, "found 0xc0017c at "
775 				    "%#x (tmpval2)\n", segptr);
776 
777 			if (tmpval == 0xc0017c)
778 				device_printf(sc->ti_dev, "found 0xc0017c at "
779 				    "%#x (tmpval)\n", segptr);
780 
781 			if (useraddr)
782 				copyout(&tmpval, ptr, 4);
783 			else
784 				bcopy(&tmpval, ptr, 4);
785 		} else {
786 			if (useraddr)
787 				copyin(ptr, &tmpval2, 4);
788 			else
789 				bcopy(ptr, &tmpval2, 4);
790 
791 			tmpval = htonl(tmpval2);
792 
793 			CSR_WRITE_4(sc, CPU_REG(TI_SRAM_DATA, cpu), tmpval);
794 		}
795 
796 		cnt -= 4;
797 		segptr += 4;
798 		ptr += 4;
799 	}
800 
801 	return (0);
802 }
803 
804 static int
805 ti_bcopy_swap(src, dst, len, swap_type)
806 	const void	*src;
807 	void		*dst;
808 	size_t		len;
809 	ti_swap_type	swap_type;
810 {
811 	const u_int8_t *tmpsrc;
812 	u_int8_t *tmpdst;
813 	size_t tmplen;
814 
815 	if (len & 0x3) {
816 		printf("ti_bcopy_swap: length %zd isn't 32-bit aligned\n",
817 		       len);
818 		return (-1);
819 	}
820 
821 	tmpsrc = src;
822 	tmpdst = dst;
823 	tmplen = len;
824 
825 	while (tmplen) {
826 		if (swap_type == TI_SWAP_NTOH)
827 			*(u_int32_t *)tmpdst =
828 				ntohl(*(const u_int32_t *)tmpsrc);
829 		else
830 			*(u_int32_t *)tmpdst =
831 				htonl(*(const u_int32_t *)tmpsrc);
832 
833 		tmpsrc += 4;
834 		tmpdst += 4;
835 		tmplen -= 4;
836 	}
837 
838 	return (0);
839 }
840 
841 /*
842  * Load firmware image into the NIC. Check that the firmware revision
843  * is acceptable and see if we want the firmware for the Tigon 1 or
844  * Tigon 2.
845  */
846 static void
847 ti_loadfw(sc)
848 	struct ti_softc		*sc;
849 {
850 
851 	TI_LOCK_ASSERT(sc);
852 
853 	switch (sc->ti_hwrev) {
854 	case TI_HWREV_TIGON:
855 		if (tigonFwReleaseMajor != TI_FIRMWARE_MAJOR ||
856 		    tigonFwReleaseMinor != TI_FIRMWARE_MINOR ||
857 		    tigonFwReleaseFix != TI_FIRMWARE_FIX) {
858 			device_printf(sc->ti_dev, "firmware revision mismatch; "
859 			    "want %d.%d.%d, got %d.%d.%d\n",
860 			    TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
861 			    TI_FIRMWARE_FIX, tigonFwReleaseMajor,
862 			    tigonFwReleaseMinor, tigonFwReleaseFix);
863 			return;
864 		}
865 		ti_mem_write(sc, tigonFwTextAddr, tigonFwTextLen, tigonFwText);
866 		ti_mem_write(sc, tigonFwDataAddr, tigonFwDataLen, tigonFwData);
867 		ti_mem_write(sc, tigonFwRodataAddr, tigonFwRodataLen,
868 		    tigonFwRodata);
869 		ti_mem_zero(sc, tigonFwBssAddr, tigonFwBssLen);
870 		ti_mem_zero(sc, tigonFwSbssAddr, tigonFwSbssLen);
871 		CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigonFwStartAddr);
872 		break;
873 	case TI_HWREV_TIGON_II:
874 		if (tigon2FwReleaseMajor != TI_FIRMWARE_MAJOR ||
875 		    tigon2FwReleaseMinor != TI_FIRMWARE_MINOR ||
876 		    tigon2FwReleaseFix != TI_FIRMWARE_FIX) {
877 			device_printf(sc->ti_dev, "firmware revision mismatch; "
878 			    "want %d.%d.%d, got %d.%d.%d\n",
879 			    TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
880 			    TI_FIRMWARE_FIX, tigon2FwReleaseMajor,
881 			    tigon2FwReleaseMinor, tigon2FwReleaseFix);
882 			return;
883 		}
884 		ti_mem_write(sc, tigon2FwTextAddr, tigon2FwTextLen,
885 		    tigon2FwText);
886 		ti_mem_write(sc, tigon2FwDataAddr, tigon2FwDataLen,
887 		    tigon2FwData);
888 		ti_mem_write(sc, tigon2FwRodataAddr, tigon2FwRodataLen,
889 		    tigon2FwRodata);
890 		ti_mem_zero(sc, tigon2FwBssAddr, tigon2FwBssLen);
891 		ti_mem_zero(sc, tigon2FwSbssAddr, tigon2FwSbssLen);
892 		CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigon2FwStartAddr);
893 		break;
894 	default:
895 		device_printf(sc->ti_dev,
896 		    "can't load firmware: unknown hardware rev\n");
897 		break;
898 	}
899 }
900 
901 /*
902  * Send the NIC a command via the command ring.
903  */
904 static void
905 ti_cmd(sc, cmd)
906 	struct ti_softc		*sc;
907 	struct ti_cmd_desc	*cmd;
908 {
909 	int			index;
910 
911 	index = sc->ti_cmd_saved_prodidx;
912 	CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(u_int32_t *)(cmd));
913 	TI_INC(index, TI_CMD_RING_CNT);
914 	CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
915 	sc->ti_cmd_saved_prodidx = index;
916 }
917 
918 /*
919  * Send the NIC an extended command. The 'len' parameter specifies the
920  * number of command slots to include after the initial command.
921  */
922 static void
923 ti_cmd_ext(sc, cmd, arg, len)
924 	struct ti_softc		*sc;
925 	struct ti_cmd_desc	*cmd;
926 	caddr_t			arg;
927 	int			len;
928 {
929 	int			index;
930 	int			i;
931 
932 	index = sc->ti_cmd_saved_prodidx;
933 	CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(u_int32_t *)(cmd));
934 	TI_INC(index, TI_CMD_RING_CNT);
935 	for (i = 0; i < len; i++) {
936 		CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4),
937 		    *(u_int32_t *)(&arg[i * 4]));
938 		TI_INC(index, TI_CMD_RING_CNT);
939 	}
940 	CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
941 	sc->ti_cmd_saved_prodidx = index;
942 }
943 
944 /*
945  * Handle events that have triggered interrupts.
946  */
947 static void
948 ti_handle_events(sc)
949 	struct ti_softc		*sc;
950 {
951 	struct ti_event_desc	*e;
952 
953 	if (sc->ti_rdata->ti_event_ring == NULL)
954 		return;
955 
956 	while (sc->ti_ev_saved_considx != sc->ti_ev_prodidx.ti_idx) {
957 		e = &sc->ti_rdata->ti_event_ring[sc->ti_ev_saved_considx];
958 		switch (TI_EVENT_EVENT(e)) {
959 		case TI_EV_LINKSTAT_CHANGED:
960 			sc->ti_linkstat = TI_EVENT_CODE(e);
961 			if (sc->ti_linkstat == TI_EV_CODE_LINK_UP)
962 				device_printf(sc->ti_dev, "10/100 link up\n");
963 			else if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP)
964 				device_printf(sc->ti_dev, "gigabit link up\n");
965 			else if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN)
966 				device_printf(sc->ti_dev, "link down\n");
967 			break;
968 		case TI_EV_ERROR:
969 			if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_INVAL_CMD)
970 				device_printf(sc->ti_dev, "invalid command\n");
971 			else if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_UNIMP_CMD)
972 				device_printf(sc->ti_dev, "unknown command\n");
973 			else if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_BADCFG)
974 				device_printf(sc->ti_dev, "bad config data\n");
975 			break;
976 		case TI_EV_FIRMWARE_UP:
977 			ti_init2(sc);
978 			break;
979 		case TI_EV_STATS_UPDATED:
980 			ti_stats_update(sc);
981 			break;
982 		case TI_EV_RESET_JUMBO_RING:
983 		case TI_EV_MCAST_UPDATED:
984 			/* Who cares. */
985 			break;
986 		default:
987 			device_printf(sc->ti_dev, "unknown event: %d\n",
988 			    TI_EVENT_EVENT(e));
989 			break;
990 		}
991 		/* Advance the consumer index. */
992 		TI_INC(sc->ti_ev_saved_considx, TI_EVENT_RING_CNT);
993 		CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, sc->ti_ev_saved_considx);
994 	}
995 }
996 
997 static int
998 ti_alloc_dmamaps(struct ti_softc *sc)
999 {
1000 	int i;
1001 
1002 	for (i = 0; i < TI_TX_RING_CNT; i++) {
1003 		sc->ti_cdata.ti_txdesc[i].tx_m = NULL;
1004 		sc->ti_cdata.ti_txdesc[i].tx_dmamap = 0;
1005 		if (bus_dmamap_create(sc->ti_mbuftx_dmat, 0,
1006 				      &sc->ti_cdata.ti_txdesc[i].tx_dmamap))
1007 			return (ENOBUFS);
1008 	}
1009 	for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
1010 		if (bus_dmamap_create(sc->ti_mbufrx_dmat, 0,
1011 				      &sc->ti_cdata.ti_rx_std_maps[i]))
1012 			return (ENOBUFS);
1013 	}
1014 
1015 	for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
1016 		if (bus_dmamap_create(sc->ti_jumbo_dmat, 0,
1017 				      &sc->ti_cdata.ti_rx_jumbo_maps[i]))
1018 			return (ENOBUFS);
1019 	}
1020 	for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
1021 		if (bus_dmamap_create(sc->ti_mbufrx_dmat, 0,
1022 				      &sc->ti_cdata.ti_rx_mini_maps[i]))
1023 			return (ENOBUFS);
1024 	}
1025 
1026 	return (0);
1027 }
1028 
1029 static void
1030 ti_free_dmamaps(struct ti_softc *sc)
1031 {
1032 	int i;
1033 
1034 	if (sc->ti_mbuftx_dmat)
1035 		for (i = 0; i < TI_TX_RING_CNT; i++)
1036 			if (sc->ti_cdata.ti_txdesc[i].tx_dmamap) {
1037 				bus_dmamap_destroy(sc->ti_mbuftx_dmat,
1038 				    sc->ti_cdata.ti_txdesc[i].tx_dmamap);
1039 				sc->ti_cdata.ti_txdesc[i].tx_dmamap = 0;
1040 			}
1041 
1042 	if (sc->ti_mbufrx_dmat)
1043 		for (i = 0; i < TI_STD_RX_RING_CNT; i++)
1044 			if (sc->ti_cdata.ti_rx_std_maps[i]) {
1045 				bus_dmamap_destroy(sc->ti_mbufrx_dmat,
1046 				    sc->ti_cdata.ti_rx_std_maps[i]);
1047 				sc->ti_cdata.ti_rx_std_maps[i] = 0;
1048 			}
1049 
1050 	if (sc->ti_jumbo_dmat)
1051 		for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++)
1052 			if (sc->ti_cdata.ti_rx_jumbo_maps[i]) {
1053 				bus_dmamap_destroy(sc->ti_jumbo_dmat,
1054 				    sc->ti_cdata.ti_rx_jumbo_maps[i]);
1055 				sc->ti_cdata.ti_rx_jumbo_maps[i] = 0;
1056 			}
1057 	if (sc->ti_mbufrx_dmat)
1058 		for (i = 0; i < TI_MINI_RX_RING_CNT; i++)
1059 			if (sc->ti_cdata.ti_rx_mini_maps[i]) {
1060 				bus_dmamap_destroy(sc->ti_mbufrx_dmat,
1061 				    sc->ti_cdata.ti_rx_mini_maps[i]);
1062 				sc->ti_cdata.ti_rx_mini_maps[i] = 0;
1063 			}
1064 }
1065 
1066 #ifdef TI_PRIVATE_JUMBOS
1067 
1068 /*
1069  * Memory management for the jumbo receive ring is a pain in the
1070  * butt. We need to allocate at least 9018 bytes of space per frame,
1071  * _and_ it has to be contiguous (unless you use the extended
1072  * jumbo descriptor format). Using malloc() all the time won't
1073  * work: malloc() allocates memory in powers of two, which means we
1074  * would end up wasting a considerable amount of space by allocating
1075  * 9K chunks. We don't have a jumbo mbuf cluster pool. Thus, we have
1076  * to do our own memory management.
1077  *
1078  * The driver needs to allocate a contiguous chunk of memory at boot
1079  * time. We then chop this up ourselves into 9K pieces and use them
1080  * as external mbuf storage.
1081  *
1082  * One issue here is how much memory to allocate. The jumbo ring has
1083  * 256 slots in it, but at 9K per slot than can consume over 2MB of
1084  * RAM. This is a bit much, especially considering we also need
1085  * RAM for the standard ring and mini ring (on the Tigon 2). To
1086  * save space, we only actually allocate enough memory for 64 slots
1087  * by default, which works out to between 500 and 600K. This can
1088  * be tuned by changing a #define in if_tireg.h.
1089  */
1090 
1091 static int
1092 ti_alloc_jumbo_mem(sc)
1093 	struct ti_softc		*sc;
1094 {
1095 	caddr_t			ptr;
1096 	int			i;
1097 	struct ti_jpool_entry   *entry;
1098 
1099 	/*
1100 	 * Grab a big chunk o' storage.  Since we are chopping this pool up
1101 	 * into ~9k chunks, there doesn't appear to be a need to use page
1102 	 * alignment.
1103 	 */
1104 	if (bus_dma_tag_create(sc->ti_parent_dmat,	/* parent */
1105 				1, 0,			/* algnmnt, boundary */
1106 				BUS_SPACE_MAXADDR,	/* lowaddr */
1107 				BUS_SPACE_MAXADDR,	/* highaddr */
1108 				NULL, NULL,		/* filter, filterarg */
1109 				TI_JMEM,		/* maxsize */
1110 				1,			/* nsegments */
1111 				TI_JMEM,		/* maxsegsize */
1112 				0,			/* flags */
1113 				NULL, NULL,		/* lockfunc, lockarg */
1114 				&sc->ti_jumbo_dmat) != 0) {
1115 		device_printf(sc->ti_dev, "Failed to allocate jumbo dmat\n");
1116 		return (ENOBUFS);
1117 	}
1118 
1119 	if (bus_dmamem_alloc(sc->ti_jumbo_dmat,
1120 			     (void**)&sc->ti_cdata.ti_jumbo_buf,
1121 			     BUS_DMA_NOWAIT, &sc->ti_jumbo_dmamap) != 0) {
1122 		device_printf(sc->ti_dev, "Failed to allocate jumbo memory\n");
1123 		return (ENOBUFS);
1124 	}
1125 
1126 	SLIST_INIT(&sc->ti_jfree_listhead);
1127 	SLIST_INIT(&sc->ti_jinuse_listhead);
1128 
1129 	/*
1130 	 * Now divide it up into 9K pieces and save the addresses
1131 	 * in an array.
1132 	 */
1133 	ptr = sc->ti_cdata.ti_jumbo_buf;
1134 	for (i = 0; i < TI_JSLOTS; i++) {
1135 		sc->ti_cdata.ti_jslots[i] = ptr;
1136 		ptr += TI_JLEN;
1137 		entry = malloc(sizeof(struct ti_jpool_entry),
1138 			       M_DEVBUF, M_NOWAIT);
1139 		if (entry == NULL) {
1140 			device_printf(sc->ti_dev, "no memory for jumbo "
1141 			    "buffer queue!\n");
1142 			return (ENOBUFS);
1143 		}
1144 		entry->slot = i;
1145 		SLIST_INSERT_HEAD(&sc->ti_jfree_listhead, entry, jpool_entries);
1146 	}
1147 
1148 	return (0);
1149 }
1150 
1151 /*
1152  * Allocate a jumbo buffer.
1153  */
1154 static void *ti_jalloc(sc)
1155 	struct ti_softc		*sc;
1156 {
1157 	struct ti_jpool_entry	*entry;
1158 
1159 	entry = SLIST_FIRST(&sc->ti_jfree_listhead);
1160 
1161 	if (entry == NULL) {
1162 		device_printf(sc->ti_dev, "no free jumbo buffers\n");
1163 		return (NULL);
1164 	}
1165 
1166 	SLIST_REMOVE_HEAD(&sc->ti_jfree_listhead, jpool_entries);
1167 	SLIST_INSERT_HEAD(&sc->ti_jinuse_listhead, entry, jpool_entries);
1168 	return (sc->ti_cdata.ti_jslots[entry->slot]);
1169 }
1170 
1171 /*
1172  * Release a jumbo buffer.
1173  */
1174 static void
1175 ti_jfree(buf, args)
1176 	void			*buf;
1177 	void			*args;
1178 {
1179 	struct ti_softc		*sc;
1180 	int			i;
1181 	struct ti_jpool_entry	*entry;
1182 
1183 	/* Extract the softc struct pointer. */
1184 	sc = (struct ti_softc *)args;
1185 
1186 	if (sc == NULL)
1187 		panic("ti_jfree: didn't get softc pointer!");
1188 
1189 	/* calculate the slot this buffer belongs to */
1190 	i = ((vm_offset_t)buf
1191 	     - (vm_offset_t)sc->ti_cdata.ti_jumbo_buf) / TI_JLEN;
1192 
1193 	if ((i < 0) || (i >= TI_JSLOTS))
1194 		panic("ti_jfree: asked to free buffer that we don't manage!");
1195 
1196 	entry = SLIST_FIRST(&sc->ti_jinuse_listhead);
1197 	if (entry == NULL)
1198 		panic("ti_jfree: buffer not in use!");
1199 	entry->slot = i;
1200 	SLIST_REMOVE_HEAD(&sc->ti_jinuse_listhead, jpool_entries);
1201 	SLIST_INSERT_HEAD(&sc->ti_jfree_listhead, entry, jpool_entries);
1202 }
1203 
1204 #else
1205 
1206 static int
1207 ti_alloc_jumbo_mem(sc)
1208 	struct ti_softc		*sc;
1209 {
1210 
1211 	/*
1212 	 * The VM system will take care of providing aligned pages.  Alignment
1213 	 * is set to 1 here so that busdma resources won't be wasted.
1214 	 */
1215 	if (bus_dma_tag_create(sc->ti_parent_dmat,	/* parent */
1216 				1, 0,			/* algnmnt, boundary */
1217 				BUS_SPACE_MAXADDR,	/* lowaddr */
1218 				BUS_SPACE_MAXADDR,	/* highaddr */
1219 				NULL, NULL,		/* filter, filterarg */
1220 				PAGE_SIZE * 4 /*XXX*/,	/* maxsize */
1221 				4,			/* nsegments */
1222 				PAGE_SIZE,		/* maxsegsize */
1223 				0,			/* flags */
1224 				NULL, NULL,		/* lockfunc, lockarg */
1225 				&sc->ti_jumbo_dmat) != 0) {
1226 		device_printf(sc->ti_dev, "Failed to allocate jumbo dmat\n");
1227 		return (ENOBUFS);
1228 	}
1229 
1230 	return (0);
1231 }
1232 
1233 #endif /* TI_PRIVATE_JUMBOS */
1234 
1235 /*
1236  * Intialize a standard receive ring descriptor.
1237  */
1238 static int
1239 ti_newbuf_std(sc, i, m)
1240 	struct ti_softc		*sc;
1241 	int			i;
1242 	struct mbuf		*m;
1243 {
1244 	bus_dmamap_t		map;
1245 	bus_dma_segment_t	segs;
1246 	struct mbuf		*m_new = NULL;
1247 	struct ti_rx_desc	*r;
1248 	int			nsegs;
1249 
1250 	nsegs = 0;
1251 	if (m == NULL) {
1252 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1253 		if (m_new == NULL)
1254 			return (ENOBUFS);
1255 
1256 		MCLGET(m_new, M_DONTWAIT);
1257 		if (!(m_new->m_flags & M_EXT)) {
1258 			m_freem(m_new);
1259 			return (ENOBUFS);
1260 		}
1261 		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
1262 	} else {
1263 		m_new = m;
1264 		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
1265 		m_new->m_data = m_new->m_ext.ext_buf;
1266 	}
1267 
1268 	m_adj(m_new, ETHER_ALIGN);
1269 	sc->ti_cdata.ti_rx_std_chain[i] = m_new;
1270 	r = &sc->ti_rdata->ti_rx_std_ring[i];
1271 	map = sc->ti_cdata.ti_rx_std_maps[i];
1272 	if (bus_dmamap_load_mbuf_sg(sc->ti_mbufrx_dmat, map, m_new, &segs,
1273 				    &nsegs, 0))
1274 		return (ENOBUFS);
1275 	if (nsegs != 1)
1276 		return (ENOBUFS);
1277 	ti_hostaddr64(&r->ti_addr, segs.ds_addr);
1278 	r->ti_len = segs.ds_len;
1279 	r->ti_type = TI_BDTYPE_RECV_BD;
1280 	r->ti_flags = 0;
1281 	if (sc->ti_ifp->if_hwassist)
1282 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
1283 	r->ti_idx = i;
1284 
1285 	bus_dmamap_sync(sc->ti_mbufrx_dmat, map, BUS_DMASYNC_PREREAD);
1286 	return (0);
1287 }
1288 
1289 /*
1290  * Intialize a mini receive ring descriptor. This only applies to
1291  * the Tigon 2.
1292  */
1293 static int
1294 ti_newbuf_mini(sc, i, m)
1295 	struct ti_softc		*sc;
1296 	int			i;
1297 	struct mbuf		*m;
1298 {
1299 	bus_dma_segment_t	segs;
1300 	bus_dmamap_t		map;
1301 	struct mbuf		*m_new = NULL;
1302 	struct ti_rx_desc	*r;
1303 	int			nsegs;
1304 
1305 	nsegs = 0;
1306 	if (m == NULL) {
1307 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1308 		if (m_new == NULL) {
1309 			return (ENOBUFS);
1310 		}
1311 		m_new->m_len = m_new->m_pkthdr.len = MHLEN;
1312 	} else {
1313 		m_new = m;
1314 		m_new->m_data = m_new->m_pktdat;
1315 		m_new->m_len = m_new->m_pkthdr.len = MHLEN;
1316 	}
1317 
1318 	m_adj(m_new, ETHER_ALIGN);
1319 	r = &sc->ti_rdata->ti_rx_mini_ring[i];
1320 	sc->ti_cdata.ti_rx_mini_chain[i] = m_new;
1321 	map = sc->ti_cdata.ti_rx_mini_maps[i];
1322 	if (bus_dmamap_load_mbuf_sg(sc->ti_mbufrx_dmat, map, m_new, &segs,
1323 				    &nsegs, 0))
1324 		return (ENOBUFS);
1325 	if (nsegs != 1)
1326 		return (ENOBUFS);
1327 	ti_hostaddr64(&r->ti_addr, segs.ds_addr);
1328 	r->ti_len = segs.ds_len;
1329 	r->ti_type = TI_BDTYPE_RECV_BD;
1330 	r->ti_flags = TI_BDFLAG_MINI_RING;
1331 	if (sc->ti_ifp->if_hwassist)
1332 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
1333 	r->ti_idx = i;
1334 
1335 	bus_dmamap_sync(sc->ti_mbufrx_dmat, map, BUS_DMASYNC_PREREAD);
1336 	return (0);
1337 }
1338 
1339 #ifdef TI_PRIVATE_JUMBOS
1340 
1341 /*
1342  * Initialize a jumbo receive ring descriptor. This allocates
1343  * a jumbo buffer from the pool managed internally by the driver.
1344  */
1345 static int
1346 ti_newbuf_jumbo(sc, i, m)
1347 	struct ti_softc		*sc;
1348 	int			i;
1349 	struct mbuf		*m;
1350 {
1351 	bus_dmamap_t		map;
1352 	struct mbuf		*m_new = NULL;
1353 	struct ti_rx_desc	*r;
1354 	int			nsegs;
1355 	bus_dma_segment_t	segs;
1356 
1357 	if (m == NULL) {
1358 		caddr_t			*buf = NULL;
1359 
1360 		/* Allocate the mbuf. */
1361 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1362 		if (m_new == NULL) {
1363 			return (ENOBUFS);
1364 		}
1365 
1366 		/* Allocate the jumbo buffer */
1367 		buf = ti_jalloc(sc);
1368 		if (buf == NULL) {
1369 			m_freem(m_new);
1370 			device_printf(sc->ti_dev, "jumbo allocation failed "
1371 			    "-- packet dropped!\n");
1372 			return (ENOBUFS);
1373 		}
1374 
1375 		/* Attach the buffer to the mbuf. */
1376 		m_new->m_data = (void *) buf;
1377 		m_new->m_len = m_new->m_pkthdr.len = TI_JUMBO_FRAMELEN;
1378 		MEXTADD(m_new, buf, TI_JUMBO_FRAMELEN, ti_jfree,
1379 		    (struct ti_softc *)sc, 0, EXT_NET_DRV);
1380 	} else {
1381 		m_new = m;
1382 		m_new->m_data = m_new->m_ext.ext_buf;
1383 		m_new->m_ext.ext_size = TI_JUMBO_FRAMELEN;
1384 	}
1385 
1386 	m_adj(m_new, ETHER_ALIGN);
1387 	/* Set up the descriptor. */
1388 	r = &sc->ti_rdata->ti_rx_jumbo_ring[i];
1389 	sc->ti_cdata.ti_rx_jumbo_chain[i] = m_new;
1390 	map = sc->ti_cdata.ti_rx_jumbo_maps[i];
1391 	if (bus_dmamap_load_mbuf_sg(sc->ti_jumbo_dmat, map, m_new, &segs,
1392 				    &nsegs, 0))
1393 		return (ENOBUFS);
1394 	if (nsegs != 1)
1395 		return (ENOBUFS);
1396 	ti_hostaddr64(&r->ti_addr, segs.ds_addr);
1397 	r->ti_len = segs.ds_len;
1398 	r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
1399 	r->ti_flags = TI_BDFLAG_JUMBO_RING;
1400 	if (sc->ti_ifp->if_hwassist)
1401 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
1402 	r->ti_idx = i;
1403 
1404 	bus_dmamap_sync(sc->ti_jumbo_dmat, map, BUS_DMASYNC_PREREAD);
1405 	return (0);
1406 }
1407 
1408 #else
1409 
1410 #if (PAGE_SIZE == 4096)
1411 #define NPAYLOAD 2
1412 #else
1413 #define NPAYLOAD 1
1414 #endif
1415 
1416 #define TCP_HDR_LEN (52 + sizeof(struct ether_header))
1417 #define UDP_HDR_LEN (28 + sizeof(struct ether_header))
1418 #define NFS_HDR_LEN (UDP_HDR_LEN)
1419 static int HDR_LEN =  TCP_HDR_LEN;
1420 
1421 
1422 /*
1423  * Initialize a jumbo receive ring descriptor. This allocates
1424  * a jumbo buffer from the pool managed internally by the driver.
1425  */
1426 static int
1427 ti_newbuf_jumbo(sc, idx, m_old)
1428 	struct ti_softc		*sc;
1429 	int			idx;
1430 	struct mbuf		*m_old;
1431 {
1432 	bus_dmamap_t		map;
1433 	struct mbuf		*cur, *m_new = NULL;
1434 	struct mbuf		*m[3] = {NULL, NULL, NULL};
1435 	struct ti_rx_desc_ext	*r;
1436 	vm_page_t		frame;
1437 	static int		color;
1438 				/* 1 extra buf to make nobufs easy*/
1439 	struct sf_buf		*sf[3] = {NULL, NULL, NULL};
1440 	int			i;
1441 	bus_dma_segment_t	segs[4];
1442 	int			nsegs;
1443 
1444 	if (m_old != NULL) {
1445 		m_new = m_old;
1446 		cur = m_old->m_next;
1447 		for (i = 0; i <= NPAYLOAD; i++){
1448 			m[i] = cur;
1449 			cur = cur->m_next;
1450 		}
1451 	} else {
1452 		/* Allocate the mbufs. */
1453 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1454 		if (m_new == NULL) {
1455 			device_printf(sc->ti_dev, "mbuf allocation failed "
1456 			    "-- packet dropped!\n");
1457 			goto nobufs;
1458 		}
1459 		MGET(m[NPAYLOAD], M_DONTWAIT, MT_DATA);
1460 		if (m[NPAYLOAD] == NULL) {
1461 			device_printf(sc->ti_dev, "cluster mbuf allocation "
1462 			    "failed -- packet dropped!\n");
1463 			goto nobufs;
1464 		}
1465 		MCLGET(m[NPAYLOAD], M_DONTWAIT);
1466 		if ((m[NPAYLOAD]->m_flags & M_EXT) == 0) {
1467 			device_printf(sc->ti_dev, "mbuf allocation failed "
1468 			    "-- packet dropped!\n");
1469 			goto nobufs;
1470 		}
1471 		m[NPAYLOAD]->m_len = MCLBYTES;
1472 
1473 		for (i = 0; i < NPAYLOAD; i++){
1474 			MGET(m[i], M_DONTWAIT, MT_DATA);
1475 			if (m[i] == NULL) {
1476 				device_printf(sc->ti_dev, "mbuf allocation "
1477 				    "failed -- packet dropped!\n");
1478 				goto nobufs;
1479 			}
1480 			frame = vm_page_alloc(NULL, color++,
1481 			    VM_ALLOC_INTERRUPT | VM_ALLOC_NOOBJ |
1482 			    VM_ALLOC_WIRED);
1483 			if (frame == NULL) {
1484 				device_printf(sc->ti_dev, "buffer allocation "
1485 				    "failed -- packet dropped!\n");
1486 				printf("      index %d page %d\n", idx, i);
1487 				goto nobufs;
1488 			}
1489 			sf[i] = sf_buf_alloc(frame, SFB_NOWAIT);
1490 			if (sf[i] == NULL) {
1491 				vm_page_unwire(frame, 0);
1492 				vm_page_free(frame);
1493 				device_printf(sc->ti_dev, "buffer allocation "
1494 				    "failed -- packet dropped!\n");
1495 				printf("      index %d page %d\n", idx, i);
1496 				goto nobufs;
1497 			}
1498 		}
1499 		for (i = 0; i < NPAYLOAD; i++){
1500 		/* Attach the buffer to the mbuf. */
1501 			m[i]->m_data = (void *)sf_buf_kva(sf[i]);
1502 			m[i]->m_len = PAGE_SIZE;
1503 			MEXTADD(m[i], sf_buf_kva(sf[i]), PAGE_SIZE,
1504 			    sf_buf_mext, (void*)sf_buf_kva(sf[i]), sf[i],
1505 			    0, EXT_DISPOSABLE);
1506 			m[i]->m_next = m[i+1];
1507 		}
1508 		/* link the buffers to the header */
1509 		m_new->m_next = m[0];
1510 		m_new->m_data += ETHER_ALIGN;
1511 		if (sc->ti_hdrsplit)
1512 			m_new->m_len = MHLEN - ETHER_ALIGN;
1513 		else
1514 			m_new->m_len = HDR_LEN;
1515 		m_new->m_pkthdr.len = NPAYLOAD * PAGE_SIZE + m_new->m_len;
1516 	}
1517 
1518 	/* Set up the descriptor. */
1519 	r = &sc->ti_rdata->ti_rx_jumbo_ring[idx];
1520 	sc->ti_cdata.ti_rx_jumbo_chain[idx] = m_new;
1521 	map = sc->ti_cdata.ti_rx_jumbo_maps[i];
1522 	if (bus_dmamap_load_mbuf_sg(sc->ti_jumbo_dmat, map, m_new, segs,
1523 				    &nsegs, 0))
1524 		return (ENOBUFS);
1525 	if ((nsegs < 1) || (nsegs > 4))
1526 		return (ENOBUFS);
1527 	ti_hostaddr64(&r->ti_addr0, segs[0].ds_addr);
1528 	r->ti_len0 = m_new->m_len;
1529 
1530 	ti_hostaddr64(&r->ti_addr1, segs[1].ds_addr);
1531 	r->ti_len1 = PAGE_SIZE;
1532 
1533 	ti_hostaddr64(&r->ti_addr2, segs[2].ds_addr);
1534 	r->ti_len2 = m[1]->m_ext.ext_size; /* could be PAGE_SIZE or MCLBYTES */
1535 
1536 	if (PAGE_SIZE == 4096) {
1537 		ti_hostaddr64(&r->ti_addr3, segs[3].ds_addr);
1538 		r->ti_len3 = MCLBYTES;
1539 	} else {
1540 		r->ti_len3 = 0;
1541 	}
1542 	r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
1543 
1544 	r->ti_flags = TI_BDFLAG_JUMBO_RING|TI_RCB_FLAG_USE_EXT_RX_BD;
1545 
1546 	if (sc->ti_ifp->if_hwassist)
1547 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM|TI_BDFLAG_IP_CKSUM;
1548 
1549 	r->ti_idx = idx;
1550 
1551 	bus_dmamap_sync(sc->ti_jumbo_dmat, map, BUS_DMASYNC_PREREAD);
1552 	return (0);
1553 
1554 nobufs:
1555 
1556 	/*
1557 	 * Warning! :
1558 	 * This can only be called before the mbufs are strung together.
1559 	 * If the mbufs are strung together, m_freem() will free the chain,
1560 	 * so that the later mbufs will be freed multiple times.
1561 	 */
1562 	if (m_new)
1563 		m_freem(m_new);
1564 
1565 	for (i = 0; i < 3; i++) {
1566 		if (m[i])
1567 			m_freem(m[i]);
1568 		if (sf[i])
1569 			sf_buf_mext((void *)sf_buf_kva(sf[i]), sf[i]);
1570 	}
1571 	return (ENOBUFS);
1572 }
1573 #endif
1574 
1575 
1576 
1577 /*
1578  * The standard receive ring has 512 entries in it. At 2K per mbuf cluster,
1579  * that's 1MB or memory, which is a lot. For now, we fill only the first
1580  * 256 ring entries and hope that our CPU is fast enough to keep up with
1581  * the NIC.
1582  */
1583 static int
1584 ti_init_rx_ring_std(sc)
1585 	struct ti_softc		*sc;
1586 {
1587 	int			i;
1588 	struct ti_cmd_desc	cmd;
1589 
1590 	for (i = 0; i < TI_SSLOTS; i++) {
1591 		if (ti_newbuf_std(sc, i, NULL) == ENOBUFS)
1592 			return (ENOBUFS);
1593 	};
1594 
1595 	TI_UPDATE_STDPROD(sc, i - 1);
1596 	sc->ti_std = i - 1;
1597 
1598 	return (0);
1599 }
1600 
1601 static void
1602 ti_free_rx_ring_std(sc)
1603 	struct ti_softc		*sc;
1604 {
1605 	bus_dmamap_t		map;
1606 	int			i;
1607 
1608 	for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
1609 		if (sc->ti_cdata.ti_rx_std_chain[i] != NULL) {
1610 			map = sc->ti_cdata.ti_rx_std_maps[i];
1611 			bus_dmamap_sync(sc->ti_mbufrx_dmat, map,
1612 			    BUS_DMASYNC_POSTREAD);
1613 			bus_dmamap_unload(sc->ti_mbufrx_dmat, map);
1614 			m_freem(sc->ti_cdata.ti_rx_std_chain[i]);
1615 			sc->ti_cdata.ti_rx_std_chain[i] = NULL;
1616 		}
1617 		bzero((char *)&sc->ti_rdata->ti_rx_std_ring[i],
1618 		    sizeof(struct ti_rx_desc));
1619 	}
1620 }
1621 
1622 static int
1623 ti_init_rx_ring_jumbo(sc)
1624 	struct ti_softc		*sc;
1625 {
1626 	int			i;
1627 	struct ti_cmd_desc	cmd;
1628 
1629 	for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
1630 		if (ti_newbuf_jumbo(sc, i, NULL) == ENOBUFS)
1631 			return (ENOBUFS);
1632 	};
1633 
1634 	TI_UPDATE_JUMBOPROD(sc, i - 1);
1635 	sc->ti_jumbo = i - 1;
1636 
1637 	return (0);
1638 }
1639 
1640 static void
1641 ti_free_rx_ring_jumbo(sc)
1642 	struct ti_softc		*sc;
1643 {
1644 	bus_dmamap_t		map;
1645 	int			i;
1646 
1647 	for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
1648 		if (sc->ti_cdata.ti_rx_jumbo_chain[i] != NULL) {
1649 			map = sc->ti_cdata.ti_rx_jumbo_maps[i];
1650 			bus_dmamap_sync(sc->ti_jumbo_dmat, map,
1651 			    BUS_DMASYNC_POSTREAD);
1652 			bus_dmamap_unload(sc->ti_jumbo_dmat, map);
1653 			m_freem(sc->ti_cdata.ti_rx_jumbo_chain[i]);
1654 			sc->ti_cdata.ti_rx_jumbo_chain[i] = NULL;
1655 		}
1656 		bzero((char *)&sc->ti_rdata->ti_rx_jumbo_ring[i],
1657 		    sizeof(struct ti_rx_desc));
1658 	}
1659 }
1660 
1661 static int
1662 ti_init_rx_ring_mini(sc)
1663 	struct ti_softc		*sc;
1664 {
1665 	int			i;
1666 
1667 	for (i = 0; i < TI_MSLOTS; i++) {
1668 		if (ti_newbuf_mini(sc, i, NULL) == ENOBUFS)
1669 			return (ENOBUFS);
1670 	};
1671 
1672 	TI_UPDATE_MINIPROD(sc, i - 1);
1673 	sc->ti_mini = i - 1;
1674 
1675 	return (0);
1676 }
1677 
1678 static void
1679 ti_free_rx_ring_mini(sc)
1680 	struct ti_softc		*sc;
1681 {
1682 	bus_dmamap_t		map;
1683 	int			i;
1684 
1685 	for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
1686 		if (sc->ti_cdata.ti_rx_mini_chain[i] != NULL) {
1687 			map = sc->ti_cdata.ti_rx_mini_maps[i];
1688 			bus_dmamap_sync(sc->ti_mbufrx_dmat, map,
1689 			    BUS_DMASYNC_POSTREAD);
1690 			bus_dmamap_unload(sc->ti_mbufrx_dmat, map);
1691 			m_freem(sc->ti_cdata.ti_rx_mini_chain[i]);
1692 			sc->ti_cdata.ti_rx_mini_chain[i] = NULL;
1693 		}
1694 		bzero((char *)&sc->ti_rdata->ti_rx_mini_ring[i],
1695 		    sizeof(struct ti_rx_desc));
1696 	}
1697 }
1698 
1699 static void
1700 ti_free_tx_ring(sc)
1701 	struct ti_softc		*sc;
1702 {
1703 	struct ti_txdesc	*txd;
1704 	int			i;
1705 
1706 	if (sc->ti_rdata->ti_tx_ring == NULL)
1707 		return;
1708 
1709 	for (i = 0; i < TI_TX_RING_CNT; i++) {
1710 		txd = &sc->ti_cdata.ti_txdesc[i];
1711 		if (txd->tx_m != NULL) {
1712 			bus_dmamap_sync(sc->ti_mbuftx_dmat, txd->tx_dmamap,
1713 			    BUS_DMASYNC_POSTWRITE);
1714 			bus_dmamap_unload(sc->ti_mbuftx_dmat, txd->tx_dmamap);
1715 			m_freem(txd->tx_m);
1716 			txd->tx_m = NULL;
1717 		}
1718 		bzero((char *)&sc->ti_rdata->ti_tx_ring[i],
1719 		    sizeof(struct ti_tx_desc));
1720 	}
1721 }
1722 
1723 static int
1724 ti_init_tx_ring(sc)
1725 	struct ti_softc		*sc;
1726 {
1727 	struct ti_txdesc	*txd;
1728 	int			i;
1729 
1730 	STAILQ_INIT(&sc->ti_cdata.ti_txfreeq);
1731 	STAILQ_INIT(&sc->ti_cdata.ti_txbusyq);
1732 	for (i = 0; i < TI_TX_RING_CNT; i++) {
1733 		txd = &sc->ti_cdata.ti_txdesc[i];
1734 		STAILQ_INSERT_TAIL(&sc->ti_cdata.ti_txfreeq, txd, tx_q);
1735 	}
1736 	sc->ti_txcnt = 0;
1737 	sc->ti_tx_saved_considx = 0;
1738 	sc->ti_tx_saved_prodidx = 0;
1739 	CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, 0);
1740 	return (0);
1741 }
1742 
1743 /*
1744  * The Tigon 2 firmware has a new way to add/delete multicast addresses,
1745  * but we have to support the old way too so that Tigon 1 cards will
1746  * work.
1747  */
1748 static void
1749 ti_add_mcast(sc, addr)
1750 	struct ti_softc		*sc;
1751 	struct ether_addr	*addr;
1752 {
1753 	struct ti_cmd_desc	cmd;
1754 	u_int16_t		*m;
1755 	u_int32_t		ext[2] = {0, 0};
1756 
1757 	m = (u_int16_t *)&addr->octet[0];
1758 
1759 	switch (sc->ti_hwrev) {
1760 	case TI_HWREV_TIGON:
1761 		CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
1762 		CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
1763 		TI_DO_CMD(TI_CMD_ADD_MCAST_ADDR, 0, 0);
1764 		break;
1765 	case TI_HWREV_TIGON_II:
1766 		ext[0] = htons(m[0]);
1767 		ext[1] = (htons(m[1]) << 16) | htons(m[2]);
1768 		TI_DO_CMD_EXT(TI_CMD_EXT_ADD_MCAST, 0, 0, (caddr_t)&ext, 2);
1769 		break;
1770 	default:
1771 		device_printf(sc->ti_dev, "unknown hwrev\n");
1772 		break;
1773 	}
1774 }
1775 
1776 static void
1777 ti_del_mcast(sc, addr)
1778 	struct ti_softc		*sc;
1779 	struct ether_addr	*addr;
1780 {
1781 	struct ti_cmd_desc	cmd;
1782 	u_int16_t		*m;
1783 	u_int32_t		ext[2] = {0, 0};
1784 
1785 	m = (u_int16_t *)&addr->octet[0];
1786 
1787 	switch (sc->ti_hwrev) {
1788 	case TI_HWREV_TIGON:
1789 		CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
1790 		CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
1791 		TI_DO_CMD(TI_CMD_DEL_MCAST_ADDR, 0, 0);
1792 		break;
1793 	case TI_HWREV_TIGON_II:
1794 		ext[0] = htons(m[0]);
1795 		ext[1] = (htons(m[1]) << 16) | htons(m[2]);
1796 		TI_DO_CMD_EXT(TI_CMD_EXT_DEL_MCAST, 0, 0, (caddr_t)&ext, 2);
1797 		break;
1798 	default:
1799 		device_printf(sc->ti_dev, "unknown hwrev\n");
1800 		break;
1801 	}
1802 }
1803 
1804 /*
1805  * Configure the Tigon's multicast address filter.
1806  *
1807  * The actual multicast table management is a bit of a pain, thanks to
1808  * slight brain damage on the part of both Alteon and us. With our
1809  * multicast code, we are only alerted when the multicast address table
1810  * changes and at that point we only have the current list of addresses:
1811  * we only know the current state, not the previous state, so we don't
1812  * actually know what addresses were removed or added. The firmware has
1813  * state, but we can't get our grubby mits on it, and there is no 'delete
1814  * all multicast addresses' command. Hence, we have to maintain our own
1815  * state so we know what addresses have been programmed into the NIC at
1816  * any given time.
1817  */
1818 static void
1819 ti_setmulti(sc)
1820 	struct ti_softc		*sc;
1821 {
1822 	struct ifnet		*ifp;
1823 	struct ifmultiaddr	*ifma;
1824 	struct ti_cmd_desc	cmd;
1825 	struct ti_mc_entry	*mc;
1826 	u_int32_t		intrs;
1827 
1828 	TI_LOCK_ASSERT(sc);
1829 
1830 	ifp = sc->ti_ifp;
1831 
1832 	if (ifp->if_flags & IFF_ALLMULTI) {
1833 		TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_ENB, 0);
1834 		return;
1835 	} else {
1836 		TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_DIS, 0);
1837 	}
1838 
1839 	/* Disable interrupts. */
1840 	intrs = CSR_READ_4(sc, TI_MB_HOSTINTR);
1841 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
1842 
1843 	/* First, zot all the existing filters. */
1844 	while (SLIST_FIRST(&sc->ti_mc_listhead) != NULL) {
1845 		mc = SLIST_FIRST(&sc->ti_mc_listhead);
1846 		ti_del_mcast(sc, &mc->mc_addr);
1847 		SLIST_REMOVE_HEAD(&sc->ti_mc_listhead, mc_entries);
1848 		free(mc, M_DEVBUF);
1849 	}
1850 
1851 	/* Now program new ones. */
1852 	if_maddr_rlock(ifp);
1853 	TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1854 		if (ifma->ifma_addr->sa_family != AF_LINK)
1855 			continue;
1856 		mc = malloc(sizeof(struct ti_mc_entry), M_DEVBUF, M_NOWAIT);
1857 		if (mc == NULL) {
1858 			device_printf(sc->ti_dev,
1859 			    "no memory for mcast filter entry\n");
1860 			continue;
1861 		}
1862 		bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1863 		    (char *)&mc->mc_addr, ETHER_ADDR_LEN);
1864 		SLIST_INSERT_HEAD(&sc->ti_mc_listhead, mc, mc_entries);
1865 		ti_add_mcast(sc, &mc->mc_addr);
1866 	}
1867 	if_maddr_runlock(ifp);
1868 
1869 	/* Re-enable interrupts. */
1870 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs);
1871 }
1872 
1873 /*
1874  * Check to see if the BIOS has configured us for a 64 bit slot when
1875  * we aren't actually in one. If we detect this condition, we can work
1876  * around it on the Tigon 2 by setting a bit in the PCI state register,
1877  * but for the Tigon 1 we must give up and abort the interface attach.
1878  */
1879 static int ti_64bitslot_war(sc)
1880 	struct ti_softc		*sc;
1881 {
1882 	if (!(CSR_READ_4(sc, TI_PCI_STATE) & TI_PCISTATE_32BIT_BUS)) {
1883 		CSR_WRITE_4(sc, 0x600, 0);
1884 		CSR_WRITE_4(sc, 0x604, 0);
1885 		CSR_WRITE_4(sc, 0x600, 0x5555AAAA);
1886 		if (CSR_READ_4(sc, 0x604) == 0x5555AAAA) {
1887 			if (sc->ti_hwrev == TI_HWREV_TIGON)
1888 				return (EINVAL);
1889 			else {
1890 				TI_SETBIT(sc, TI_PCI_STATE,
1891 				    TI_PCISTATE_32BIT_BUS);
1892 				return (0);
1893 			}
1894 		}
1895 	}
1896 
1897 	return (0);
1898 }
1899 
1900 /*
1901  * Do endian, PCI and DMA initialization. Also check the on-board ROM
1902  * self-test results.
1903  */
1904 static int
1905 ti_chipinit(sc)
1906 	struct ti_softc		*sc;
1907 {
1908 	u_int32_t		cacheline;
1909 	u_int32_t		pci_writemax = 0;
1910 	u_int32_t		hdrsplit;
1911 
1912 	/* Initialize link to down state. */
1913 	sc->ti_linkstat = TI_EV_CODE_LINK_DOWN;
1914 
1915 	if (sc->ti_ifp->if_capenable & IFCAP_HWCSUM)
1916 		sc->ti_ifp->if_hwassist = TI_CSUM_FEATURES;
1917 	else
1918 		sc->ti_ifp->if_hwassist = 0;
1919 
1920 	/* Set endianness before we access any non-PCI registers. */
1921 #if 0 && BYTE_ORDER == BIG_ENDIAN
1922 	CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
1923 	    TI_MHC_BIGENDIAN_INIT | (TI_MHC_BIGENDIAN_INIT << 24));
1924 #else
1925 	CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
1926 	    TI_MHC_LITTLEENDIAN_INIT | (TI_MHC_LITTLEENDIAN_INIT << 24));
1927 #endif
1928 
1929 	/* Check the ROM failed bit to see if self-tests passed. */
1930 	if (CSR_READ_4(sc, TI_CPU_STATE) & TI_CPUSTATE_ROMFAIL) {
1931 		device_printf(sc->ti_dev, "board self-diagnostics failed!\n");
1932 		return (ENODEV);
1933 	}
1934 
1935 	/* Halt the CPU. */
1936 	TI_SETBIT(sc, TI_CPU_STATE, TI_CPUSTATE_HALT);
1937 
1938 	/* Figure out the hardware revision. */
1939 	switch (CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_CHIP_REV_MASK) {
1940 	case TI_REV_TIGON_I:
1941 		sc->ti_hwrev = TI_HWREV_TIGON;
1942 		break;
1943 	case TI_REV_TIGON_II:
1944 		sc->ti_hwrev = TI_HWREV_TIGON_II;
1945 		break;
1946 	default:
1947 		device_printf(sc->ti_dev, "unsupported chip revision\n");
1948 		return (ENODEV);
1949 	}
1950 
1951 	/* Do special setup for Tigon 2. */
1952 	if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
1953 		TI_SETBIT(sc, TI_CPU_CTL_B, TI_CPUSTATE_HALT);
1954 		TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_SRAM_BANK_512K);
1955 		TI_SETBIT(sc, TI_MISC_CONF, TI_MCR_SRAM_SYNCHRONOUS);
1956 	}
1957 
1958 	/*
1959 	 * We don't have firmware source for the Tigon 1, so Tigon 1 boards
1960 	 * can't do header splitting.
1961 	 */
1962 #ifdef TI_JUMBO_HDRSPLIT
1963 	if (sc->ti_hwrev != TI_HWREV_TIGON)
1964 		sc->ti_hdrsplit = 1;
1965 	else
1966 		device_printf(sc->ti_dev,
1967 		    "can't do header splitting on a Tigon I board\n");
1968 #endif /* TI_JUMBO_HDRSPLIT */
1969 
1970 	/* Set up the PCI state register. */
1971 	CSR_WRITE_4(sc, TI_PCI_STATE, TI_PCI_READ_CMD|TI_PCI_WRITE_CMD);
1972 	if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
1973 		TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_USE_MEM_RD_MULT);
1974 	}
1975 
1976 	/* Clear the read/write max DMA parameters. */
1977 	TI_CLRBIT(sc, TI_PCI_STATE, (TI_PCISTATE_WRITE_MAXDMA|
1978 	    TI_PCISTATE_READ_MAXDMA));
1979 
1980 	/* Get cache line size. */
1981 	cacheline = CSR_READ_4(sc, TI_PCI_BIST) & 0xFF;
1982 
1983 	/*
1984 	 * If the system has set enabled the PCI memory write
1985 	 * and invalidate command in the command register, set
1986 	 * the write max parameter accordingly. This is necessary
1987 	 * to use MWI with the Tigon 2.
1988 	 */
1989 	if (CSR_READ_4(sc, TI_PCI_CMDSTAT) & PCIM_CMD_MWIEN) {
1990 		switch (cacheline) {
1991 		case 1:
1992 		case 4:
1993 		case 8:
1994 		case 16:
1995 		case 32:
1996 		case 64:
1997 			break;
1998 		default:
1999 		/* Disable PCI memory write and invalidate. */
2000 			if (bootverbose)
2001 				device_printf(sc->ti_dev, "cache line size %d"
2002 				    " not supported; disabling PCI MWI\n",
2003 				    cacheline);
2004 			CSR_WRITE_4(sc, TI_PCI_CMDSTAT, CSR_READ_4(sc,
2005 			    TI_PCI_CMDSTAT) & ~PCIM_CMD_MWIEN);
2006 			break;
2007 		}
2008 	}
2009 
2010 	TI_SETBIT(sc, TI_PCI_STATE, pci_writemax);
2011 
2012 	/* This sets the min dma param all the way up (0xff). */
2013 	TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_MINDMA);
2014 
2015 	if (sc->ti_hdrsplit)
2016 		hdrsplit = TI_OPMODE_JUMBO_HDRSPLIT;
2017 	else
2018 		hdrsplit = 0;
2019 
2020 	/* Configure DMA variables. */
2021 #if BYTE_ORDER == BIG_ENDIAN
2022 	CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_BD |
2023 	    TI_OPMODE_BYTESWAP_DATA | TI_OPMODE_WORDSWAP_BD |
2024 	    TI_OPMODE_WARN_ENB | TI_OPMODE_FATAL_ENB |
2025 	    TI_OPMODE_DONT_FRAG_JUMBO | hdrsplit);
2026 #else /* BYTE_ORDER */
2027 	CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_DATA|
2028 	    TI_OPMODE_WORDSWAP_BD|TI_OPMODE_DONT_FRAG_JUMBO|
2029 	    TI_OPMODE_WARN_ENB|TI_OPMODE_FATAL_ENB | hdrsplit);
2030 #endif /* BYTE_ORDER */
2031 
2032 	/*
2033 	 * Only allow 1 DMA channel to be active at a time.
2034 	 * I don't think this is a good idea, but without it
2035 	 * the firmware racks up lots of nicDmaReadRingFull
2036 	 * errors.  This is not compatible with hardware checksums.
2037 	 */
2038 	if (sc->ti_ifp->if_hwassist == 0)
2039 		TI_SETBIT(sc, TI_GCR_OPMODE, TI_OPMODE_1_DMA_ACTIVE);
2040 
2041 	/* Recommended settings from Tigon manual. */
2042 	CSR_WRITE_4(sc, TI_GCR_DMA_WRITECFG, TI_DMA_STATE_THRESH_8W);
2043 	CSR_WRITE_4(sc, TI_GCR_DMA_READCFG, TI_DMA_STATE_THRESH_8W);
2044 
2045 	if (ti_64bitslot_war(sc)) {
2046 		device_printf(sc->ti_dev, "bios thinks we're in a 64 bit slot, "
2047 		    "but we aren't");
2048 		return (EINVAL);
2049 	}
2050 
2051 	return (0);
2052 }
2053 
2054 /*
2055  * Initialize the general information block and firmware, and
2056  * start the CPU(s) running.
2057  */
2058 static int
2059 ti_gibinit(sc)
2060 	struct ti_softc		*sc;
2061 {
2062 	struct ti_rcb		*rcb;
2063 	int			i;
2064 	struct ifnet		*ifp;
2065 	uint32_t		rdphys;
2066 
2067 	TI_LOCK_ASSERT(sc);
2068 
2069 	ifp = sc->ti_ifp;
2070 	rdphys = sc->ti_rdata_phys;
2071 
2072 	/* Disable interrupts for now. */
2073 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
2074 
2075 	/*
2076 	 * Tell the chip where to find the general information block.
2077 	 * While this struct could go into >4GB memory, we allocate it in a
2078 	 * single slab with the other descriptors, and those don't seem to
2079 	 * support being located in a 64-bit region.
2080 	 */
2081 	CSR_WRITE_4(sc, TI_GCR_GENINFO_HI, 0);
2082 	CSR_WRITE_4(sc, TI_GCR_GENINFO_LO, rdphys + TI_RD_OFF(ti_info));
2083 
2084 	/* Load the firmware into SRAM. */
2085 	ti_loadfw(sc);
2086 
2087 	/* Set up the contents of the general info and ring control blocks. */
2088 
2089 	/* Set up the event ring and producer pointer. */
2090 	rcb = &sc->ti_rdata->ti_info.ti_ev_rcb;
2091 
2092 	TI_HOSTADDR(rcb->ti_hostaddr) = rdphys + TI_RD_OFF(ti_event_ring);
2093 	rcb->ti_flags = 0;
2094 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_ev_prodidx_ptr) =
2095 	    rdphys + TI_RD_OFF(ti_ev_prodidx_r);
2096 	sc->ti_ev_prodidx.ti_idx = 0;
2097 	CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, 0);
2098 	sc->ti_ev_saved_considx = 0;
2099 
2100 	/* Set up the command ring and producer mailbox. */
2101 	rcb = &sc->ti_rdata->ti_info.ti_cmd_rcb;
2102 
2103 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_GCR_NIC_ADDR(TI_GCR_CMDRING);
2104 	rcb->ti_flags = 0;
2105 	rcb->ti_max_len = 0;
2106 	for (i = 0; i < TI_CMD_RING_CNT; i++) {
2107 		CSR_WRITE_4(sc, TI_GCR_CMDRING + (i * 4), 0);
2108 	}
2109 	CSR_WRITE_4(sc, TI_GCR_CMDCONS_IDX, 0);
2110 	CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, 0);
2111 	sc->ti_cmd_saved_prodidx = 0;
2112 
2113 	/*
2114 	 * Assign the address of the stats refresh buffer.
2115 	 * We re-use the current stats buffer for this to
2116 	 * conserve memory.
2117 	 */
2118 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_refresh_stats_ptr) =
2119 	    rdphys + TI_RD_OFF(ti_info.ti_stats);
2120 
2121 	/* Set up the standard receive ring. */
2122 	rcb = &sc->ti_rdata->ti_info.ti_std_rx_rcb;
2123 	TI_HOSTADDR(rcb->ti_hostaddr) = rdphys + TI_RD_OFF(ti_rx_std_ring);
2124 	rcb->ti_max_len = TI_FRAMELEN;
2125 	rcb->ti_flags = 0;
2126 	if (sc->ti_ifp->if_hwassist)
2127 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
2128 		     TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
2129 	rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
2130 
2131 	/* Set up the jumbo receive ring. */
2132 	rcb = &sc->ti_rdata->ti_info.ti_jumbo_rx_rcb;
2133 	TI_HOSTADDR(rcb->ti_hostaddr) = rdphys + TI_RD_OFF(ti_rx_jumbo_ring);
2134 
2135 #ifdef TI_PRIVATE_JUMBOS
2136 	rcb->ti_max_len = TI_JUMBO_FRAMELEN;
2137 	rcb->ti_flags = 0;
2138 #else
2139 	rcb->ti_max_len = PAGE_SIZE;
2140 	rcb->ti_flags = TI_RCB_FLAG_USE_EXT_RX_BD;
2141 #endif
2142 	if (sc->ti_ifp->if_hwassist)
2143 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
2144 		     TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
2145 	rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
2146 
2147 	/*
2148 	 * Set up the mini ring. Only activated on the
2149 	 * Tigon 2 but the slot in the config block is
2150 	 * still there on the Tigon 1.
2151 	 */
2152 	rcb = &sc->ti_rdata->ti_info.ti_mini_rx_rcb;
2153 	TI_HOSTADDR(rcb->ti_hostaddr) = rdphys + TI_RD_OFF(ti_rx_mini_ring);
2154 	rcb->ti_max_len = MHLEN - ETHER_ALIGN;
2155 	if (sc->ti_hwrev == TI_HWREV_TIGON)
2156 		rcb->ti_flags = TI_RCB_FLAG_RING_DISABLED;
2157 	else
2158 		rcb->ti_flags = 0;
2159 	if (sc->ti_ifp->if_hwassist)
2160 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
2161 		     TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
2162 	rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
2163 
2164 	/*
2165 	 * Set up the receive return ring.
2166 	 */
2167 	rcb = &sc->ti_rdata->ti_info.ti_return_rcb;
2168 	TI_HOSTADDR(rcb->ti_hostaddr) = rdphys + TI_RD_OFF(ti_rx_return_ring);
2169 	rcb->ti_flags = 0;
2170 	rcb->ti_max_len = TI_RETURN_RING_CNT;
2171 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_return_prodidx_ptr) =
2172 	    rdphys + TI_RD_OFF(ti_return_prodidx_r);
2173 
2174 	/*
2175 	 * Set up the tx ring. Note: for the Tigon 2, we have the option
2176 	 * of putting the transmit ring in the host's address space and
2177 	 * letting the chip DMA it instead of leaving the ring in the NIC's
2178 	 * memory and accessing it through the shared memory region. We
2179 	 * do this for the Tigon 2, but it doesn't work on the Tigon 1,
2180 	 * so we have to revert to the shared memory scheme if we detect
2181 	 * a Tigon 1 chip.
2182 	 */
2183 	CSR_WRITE_4(sc, TI_WINBASE, TI_TX_RING_BASE);
2184 	bzero((char *)sc->ti_rdata->ti_tx_ring,
2185 	    TI_TX_RING_CNT * sizeof(struct ti_tx_desc));
2186 	rcb = &sc->ti_rdata->ti_info.ti_tx_rcb;
2187 	if (sc->ti_hwrev == TI_HWREV_TIGON)
2188 		rcb->ti_flags = 0;
2189 	else
2190 		rcb->ti_flags = TI_RCB_FLAG_HOST_RING;
2191 	rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
2192 	if (sc->ti_ifp->if_hwassist)
2193 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
2194 		     TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
2195 	rcb->ti_max_len = TI_TX_RING_CNT;
2196 	if (sc->ti_hwrev == TI_HWREV_TIGON)
2197 		TI_HOSTADDR(rcb->ti_hostaddr) = TI_TX_RING_BASE;
2198 	else
2199 		TI_HOSTADDR(rcb->ti_hostaddr) = rdphys + TI_RD_OFF(ti_tx_ring);
2200 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_tx_considx_ptr) =
2201 	    rdphys + TI_RD_OFF(ti_tx_considx_r);
2202 
2203 	bus_dmamap_sync(sc->ti_rdata_dmat, sc->ti_rdata_dmamap,
2204 	    BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
2205 
2206 	/* Set up tuneables */
2207 #if 0
2208 	if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
2209 		CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS,
2210 		    (sc->ti_rx_coal_ticks / 10));
2211 	else
2212 #endif
2213 		CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS, sc->ti_rx_coal_ticks);
2214 	CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS, sc->ti_tx_coal_ticks);
2215 	CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks);
2216 	CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD, sc->ti_rx_max_coal_bds);
2217 	CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD, sc->ti_tx_max_coal_bds);
2218 	CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO, sc->ti_tx_buf_ratio);
2219 
2220 	/* Turn interrupts on. */
2221 	CSR_WRITE_4(sc, TI_GCR_MASK_INTRS, 0);
2222 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
2223 
2224 	/* Start CPU. */
2225 	TI_CLRBIT(sc, TI_CPU_STATE, (TI_CPUSTATE_HALT|TI_CPUSTATE_STEP));
2226 
2227 	return (0);
2228 }
2229 
2230 static void
2231 ti_rdata_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
2232 {
2233 	struct ti_softc *sc;
2234 
2235 	sc = arg;
2236 	if (error || nseg != 1)
2237 		return;
2238 
2239 	/*
2240 	 * All of the Tigon data structures need to live at <4GB.  This
2241 	 * cast is fine since busdma was told about this constraint.
2242 	 */
2243 	sc->ti_rdata_phys = segs[0].ds_addr;
2244 	return;
2245 }
2246 
2247 /*
2248  * Probe for a Tigon chip. Check the PCI vendor and device IDs
2249  * against our list and return its name if we find a match.
2250  */
2251 static int
2252 ti_probe(dev)
2253 	device_t		dev;
2254 {
2255 	struct ti_type		*t;
2256 
2257 	t = ti_devs;
2258 
2259 	while (t->ti_name != NULL) {
2260 		if ((pci_get_vendor(dev) == t->ti_vid) &&
2261 		    (pci_get_device(dev) == t->ti_did)) {
2262 			device_set_desc(dev, t->ti_name);
2263 			return (BUS_PROBE_DEFAULT);
2264 		}
2265 		t++;
2266 	}
2267 
2268 	return (ENXIO);
2269 }
2270 
2271 static int
2272 ti_attach(dev)
2273 	device_t		dev;
2274 {
2275 	struct ifnet		*ifp;
2276 	struct ti_softc		*sc;
2277 	int			error = 0, rid;
2278 	u_char			eaddr[6];
2279 
2280 	sc = device_get_softc(dev);
2281 	sc->ti_unit = device_get_unit(dev);
2282 	sc->ti_dev = dev;
2283 
2284 	mtx_init(&sc->ti_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
2285 	    MTX_DEF);
2286 	callout_init_mtx(&sc->ti_watchdog, &sc->ti_mtx, 0);
2287 	ifmedia_init(&sc->ifmedia, IFM_IMASK, ti_ifmedia_upd, ti_ifmedia_sts);
2288 	ifp = sc->ti_ifp = if_alloc(IFT_ETHER);
2289 	if (ifp == NULL) {
2290 		device_printf(dev, "can not if_alloc()\n");
2291 		error = ENOSPC;
2292 		goto fail;
2293 	}
2294 	sc->ti_ifp->if_capabilities = IFCAP_HWCSUM |
2295 	    IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
2296 	sc->ti_ifp->if_capenable = sc->ti_ifp->if_capabilities;
2297 
2298 	/*
2299 	 * Map control/status registers.
2300 	 */
2301 	pci_enable_busmaster(dev);
2302 
2303 	rid = TI_PCI_LOMEM;
2304 	sc->ti_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
2305 	    RF_ACTIVE);
2306 
2307 	if (sc->ti_res == NULL) {
2308 		device_printf(dev, "couldn't map memory\n");
2309 		error = ENXIO;
2310 		goto fail;
2311 	}
2312 
2313 	sc->ti_btag = rman_get_bustag(sc->ti_res);
2314 	sc->ti_bhandle = rman_get_bushandle(sc->ti_res);
2315 
2316 	/* Allocate interrupt */
2317 	rid = 0;
2318 
2319 	sc->ti_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
2320 	    RF_SHAREABLE | RF_ACTIVE);
2321 
2322 	if (sc->ti_irq == NULL) {
2323 		device_printf(dev, "couldn't map interrupt\n");
2324 		error = ENXIO;
2325 		goto fail;
2326 	}
2327 
2328 	if (ti_chipinit(sc)) {
2329 		device_printf(dev, "chip initialization failed\n");
2330 		error = ENXIO;
2331 		goto fail;
2332 	}
2333 
2334 	/* Zero out the NIC's on-board SRAM. */
2335 	ti_mem_zero(sc, 0x2000, 0x100000 - 0x2000);
2336 
2337 	/* Init again -- zeroing memory may have clobbered some registers. */
2338 	if (ti_chipinit(sc)) {
2339 		device_printf(dev, "chip initialization failed\n");
2340 		error = ENXIO;
2341 		goto fail;
2342 	}
2343 
2344 	/*
2345 	 * Get station address from the EEPROM. Note: the manual states
2346 	 * that the MAC address is at offset 0x8c, however the data is
2347 	 * stored as two longwords (since that's how it's loaded into
2348 	 * the NIC). This means the MAC address is actually preceded
2349 	 * by two zero bytes. We need to skip over those.
2350 	 */
2351 	if (ti_read_eeprom(sc, eaddr,
2352 				TI_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) {
2353 		device_printf(dev, "failed to read station address\n");
2354 		error = ENXIO;
2355 		goto fail;
2356 	}
2357 
2358 	/* Allocate the general information block and ring buffers. */
2359 	if (bus_dma_tag_create(bus_get_dma_tag(dev),	/* parent */
2360 				1, 0,			/* algnmnt, boundary */
2361 				BUS_SPACE_MAXADDR,	/* lowaddr */
2362 				BUS_SPACE_MAXADDR,	/* highaddr */
2363 				NULL, NULL,		/* filter, filterarg */
2364 				BUS_SPACE_MAXSIZE_32BIT,/* maxsize */
2365 				0,			/* nsegments */
2366 				BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
2367 				0,			/* flags */
2368 				NULL, NULL,		/* lockfunc, lockarg */
2369 				&sc->ti_parent_dmat) != 0) {
2370 		device_printf(dev, "Failed to allocate parent dmat\n");
2371 		error = ENOMEM;
2372 		goto fail;
2373 	}
2374 
2375 	if (bus_dma_tag_create(sc->ti_parent_dmat,	/* parent */
2376 				PAGE_SIZE, 0,		/* algnmnt, boundary */
2377 				BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
2378 				BUS_SPACE_MAXADDR,	/* highaddr */
2379 				NULL, NULL,		/* filter, filterarg */
2380 				sizeof(struct ti_ring_data),	/* maxsize */
2381 				1,			/* nsegments */
2382 				sizeof(struct ti_ring_data),	/* maxsegsize */
2383 				0,			/* flags */
2384 				NULL, NULL,		/* lockfunc, lockarg */
2385 				&sc->ti_rdata_dmat) != 0) {
2386 		device_printf(dev, "Failed to allocate rdata dmat\n");
2387 		error = ENOMEM;
2388 		goto fail;
2389 	}
2390 
2391 	if (bus_dmamem_alloc(sc->ti_rdata_dmat, (void**)&sc->ti_rdata,
2392 			     BUS_DMA_NOWAIT, &sc->ti_rdata_dmamap) != 0) {
2393 		device_printf(dev, "Failed to allocate rdata memory\n");
2394 		error = ENOMEM;
2395 		goto fail;
2396 	}
2397 
2398 	if (bus_dmamap_load(sc->ti_rdata_dmat, sc->ti_rdata_dmamap,
2399 			    sc->ti_rdata, sizeof(struct ti_ring_data),
2400 			    ti_rdata_cb, sc, BUS_DMA_NOWAIT) != 0) {
2401 		device_printf(dev, "Failed to load rdata segments\n");
2402 		error = ENOMEM;
2403 		goto fail;
2404 	}
2405 
2406 	bzero(sc->ti_rdata, sizeof(struct ti_ring_data));
2407 
2408 	/* Try to allocate memory for jumbo buffers. */
2409 	if (ti_alloc_jumbo_mem(sc)) {
2410 		device_printf(dev, "jumbo buffer allocation failed\n");
2411 		error = ENXIO;
2412 		goto fail;
2413 	}
2414 
2415 	if (bus_dma_tag_create(sc->ti_parent_dmat,	/* parent */
2416 				1, 0,			/* algnmnt, boundary */
2417 				BUS_SPACE_MAXADDR,	/* lowaddr */
2418 				BUS_SPACE_MAXADDR,	/* highaddr */
2419 				NULL, NULL,		/* filter, filterarg */
2420 				MCLBYTES * TI_MAXTXSEGS,/* maxsize */
2421 				TI_MAXTXSEGS,		/* nsegments */
2422 				MCLBYTES,		/* maxsegsize */
2423 				0,			/* flags */
2424 				NULL, NULL,		/* lockfunc, lockarg */
2425 				&sc->ti_mbuftx_dmat) != 0) {
2426 		device_printf(dev, "Failed to allocate rdata dmat\n");
2427 		error = ENOMEM;
2428 		goto fail;
2429 	}
2430 
2431 	if (bus_dma_tag_create(sc->ti_parent_dmat,	/* parent */
2432 				1, 0,			/* algnmnt, boundary */
2433 				BUS_SPACE_MAXADDR,	/* lowaddr */
2434 				BUS_SPACE_MAXADDR,	/* highaddr */
2435 				NULL, NULL,		/* filter, filterarg */
2436 				MCLBYTES,		/* maxsize */
2437 				1,			/* nsegments */
2438 				MCLBYTES,		/* maxsegsize */
2439 				0,			/* flags */
2440 				NULL, NULL,		/* lockfunc, lockarg */
2441 				&sc->ti_mbufrx_dmat) != 0) {
2442 		device_printf(dev, "Failed to allocate rdata dmat\n");
2443 		error = ENOMEM;
2444 		goto fail;
2445 	}
2446 
2447 	if (ti_alloc_dmamaps(sc)) {
2448 		device_printf(dev, "dma map creation failed\n");
2449 		error = ENXIO;
2450 		goto fail;
2451 	}
2452 
2453 	/*
2454 	 * We really need a better way to tell a 1000baseTX card
2455 	 * from a 1000baseSX one, since in theory there could be
2456 	 * OEMed 1000baseTX cards from lame vendors who aren't
2457 	 * clever enough to change the PCI ID. For the moment
2458 	 * though, the AceNIC is the only copper card available.
2459 	 */
2460 	if (pci_get_vendor(dev) == ALT_VENDORID &&
2461 	    pci_get_device(dev) == ALT_DEVICEID_ACENIC_COPPER)
2462 		sc->ti_copper = 1;
2463 	/* Ok, it's not the only copper card available. */
2464 	if (pci_get_vendor(dev) == NG_VENDORID &&
2465 	    pci_get_device(dev) == NG_DEVICEID_GA620T)
2466 		sc->ti_copper = 1;
2467 
2468 	/* Set default tuneable values. */
2469 	sc->ti_stat_ticks = 2 * TI_TICKS_PER_SEC;
2470 #if 0
2471 	sc->ti_rx_coal_ticks = TI_TICKS_PER_SEC / 5000;
2472 #endif
2473 	sc->ti_rx_coal_ticks = 170;
2474 	sc->ti_tx_coal_ticks = TI_TICKS_PER_SEC / 500;
2475 	sc->ti_rx_max_coal_bds = 64;
2476 #if 0
2477 	sc->ti_tx_max_coal_bds = 128;
2478 #endif
2479 	sc->ti_tx_max_coal_bds = 32;
2480 	sc->ti_tx_buf_ratio = 21;
2481 
2482 	/* Set up ifnet structure */
2483 	ifp->if_softc = sc;
2484 	if_initname(ifp, device_get_name(dev), device_get_unit(dev));
2485 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
2486 	ifp->if_ioctl = ti_ioctl;
2487 	ifp->if_start = ti_start;
2488 	ifp->if_init = ti_init;
2489 	ifp->if_baudrate = 1000000000;
2490 	ifp->if_mtu = ETHERMTU;
2491 	ifp->if_snd.ifq_maxlen = TI_TX_RING_CNT - 1;
2492 
2493 	/* Set up ifmedia support. */
2494 	if (sc->ti_copper) {
2495 		/*
2496 		 * Copper cards allow manual 10/100 mode selection,
2497 		 * but not manual 1000baseTX mode selection. Why?
2498 		 * Becuase currently there's no way to specify the
2499 		 * master/slave setting through the firmware interface,
2500 		 * so Alteon decided to just bag it and handle it
2501 		 * via autonegotiation.
2502 		 */
2503 		ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
2504 		ifmedia_add(&sc->ifmedia,
2505 		    IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
2506 		ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
2507 		ifmedia_add(&sc->ifmedia,
2508 		    IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
2509 		ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_T, 0, NULL);
2510 		ifmedia_add(&sc->ifmedia,
2511 		    IFM_ETHER|IFM_1000_T|IFM_FDX, 0, NULL);
2512 	} else {
2513 		/* Fiber cards don't support 10/100 modes. */
2514 		ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
2515 		ifmedia_add(&sc->ifmedia,
2516 		    IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
2517 	}
2518 	ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
2519 	ifmedia_set(&sc->ifmedia, IFM_ETHER|IFM_AUTO);
2520 
2521 	/*
2522 	 * We're assuming here that card initialization is a sequential
2523 	 * thing.  If it isn't, multiple cards probing at the same time
2524 	 * could stomp on the list of softcs here.
2525 	 */
2526 
2527 	/* Register the device */
2528 	sc->dev = make_dev(&ti_cdevsw, sc->ti_unit, UID_ROOT, GID_OPERATOR,
2529 			   0600, "ti%d", sc->ti_unit);
2530 	sc->dev->si_drv1 = sc;
2531 
2532 	/*
2533 	 * Call MI attach routine.
2534 	 */
2535 	ether_ifattach(ifp, eaddr);
2536 
2537 	/* Hook interrupt last to avoid having to lock softc */
2538 	error = bus_setup_intr(dev, sc->ti_irq, INTR_TYPE_NET|INTR_MPSAFE,
2539 	   NULL, ti_intr, sc, &sc->ti_intrhand);
2540 
2541 	if (error) {
2542 		device_printf(dev, "couldn't set up irq\n");
2543 		goto fail;
2544 	}
2545 
2546 fail:
2547 	if (error)
2548 		ti_detach(dev);
2549 
2550 	return (error);
2551 }
2552 
2553 /*
2554  * Shutdown hardware and free up resources. This can be called any
2555  * time after the mutex has been initialized. It is called in both
2556  * the error case in attach and the normal detach case so it needs
2557  * to be careful about only freeing resources that have actually been
2558  * allocated.
2559  */
2560 static int
2561 ti_detach(dev)
2562 	device_t		dev;
2563 {
2564 	struct ti_softc		*sc;
2565 	struct ifnet		*ifp;
2566 
2567 	sc = device_get_softc(dev);
2568 	if (sc->dev)
2569 		destroy_dev(sc->dev);
2570 	KASSERT(mtx_initialized(&sc->ti_mtx), ("ti mutex not initialized"));
2571 	ifp = sc->ti_ifp;
2572 	if (device_is_attached(dev)) {
2573 		ether_ifdetach(ifp);
2574 		TI_LOCK(sc);
2575 		ti_stop(sc);
2576 		TI_UNLOCK(sc);
2577 	}
2578 
2579 	/* These should only be active if attach succeeded */
2580 	callout_drain(&sc->ti_watchdog);
2581 	bus_generic_detach(dev);
2582 	ti_free_dmamaps(sc);
2583 	ifmedia_removeall(&sc->ifmedia);
2584 
2585 #ifdef TI_PRIVATE_JUMBOS
2586 	if (sc->ti_cdata.ti_jumbo_buf)
2587 		bus_dmamem_free(sc->ti_jumbo_dmat, sc->ti_cdata.ti_jumbo_buf,
2588 		    sc->ti_jumbo_dmamap);
2589 #endif
2590 	if (sc->ti_jumbo_dmat)
2591 		bus_dma_tag_destroy(sc->ti_jumbo_dmat);
2592 	if (sc->ti_mbuftx_dmat)
2593 		bus_dma_tag_destroy(sc->ti_mbuftx_dmat);
2594 	if (sc->ti_mbufrx_dmat)
2595 		bus_dma_tag_destroy(sc->ti_mbufrx_dmat);
2596 	if (sc->ti_rdata)
2597 		bus_dmamem_free(sc->ti_rdata_dmat, sc->ti_rdata,
2598 				sc->ti_rdata_dmamap);
2599 	if (sc->ti_rdata_dmat)
2600 		bus_dma_tag_destroy(sc->ti_rdata_dmat);
2601 	if (sc->ti_parent_dmat)
2602 		bus_dma_tag_destroy(sc->ti_parent_dmat);
2603 	if (sc->ti_intrhand)
2604 		bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
2605 	if (sc->ti_irq)
2606 		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
2607 	if (sc->ti_res) {
2608 		bus_release_resource(dev, SYS_RES_MEMORY, TI_PCI_LOMEM,
2609 		    sc->ti_res);
2610 	}
2611 	if (ifp)
2612 		if_free(ifp);
2613 
2614 	mtx_destroy(&sc->ti_mtx);
2615 
2616 	return (0);
2617 }
2618 
2619 #ifdef TI_JUMBO_HDRSPLIT
2620 /*
2621  * If hdr_len is 0, that means that header splitting wasn't done on
2622  * this packet for some reason.  The two most likely reasons are that
2623  * the protocol isn't a supported protocol for splitting, or this
2624  * packet had a fragment offset that wasn't 0.
2625  *
2626  * The header length, if it is non-zero, will always be the length of
2627  * the headers on the packet, but that length could be longer than the
2628  * first mbuf.  So we take the minimum of the two as the actual
2629  * length.
2630  */
2631 static __inline void
2632 ti_hdr_split(struct mbuf *top, int hdr_len, int pkt_len, int idx)
2633 {
2634 	int i = 0;
2635 	int lengths[4] = {0, 0, 0, 0};
2636 	struct mbuf *m, *mp;
2637 
2638 	if (hdr_len != 0)
2639 		top->m_len = min(hdr_len, top->m_len);
2640 	pkt_len -= top->m_len;
2641 	lengths[i++] = top->m_len;
2642 
2643 	mp = top;
2644 	for (m = top->m_next; m && pkt_len; m = m->m_next) {
2645 		m->m_len = m->m_ext.ext_size = min(m->m_len, pkt_len);
2646 		pkt_len -= m->m_len;
2647 		lengths[i++] = m->m_len;
2648 		mp = m;
2649 	}
2650 
2651 #if 0
2652 	if (hdr_len != 0)
2653 		printf("got split packet: ");
2654 	else
2655 		printf("got non-split packet: ");
2656 
2657 	printf("%d,%d,%d,%d = %d\n", lengths[0],
2658 	    lengths[1], lengths[2], lengths[3],
2659 	    lengths[0] + lengths[1] + lengths[2] +
2660 	    lengths[3]);
2661 #endif
2662 
2663 	if (pkt_len)
2664 		panic("header splitting didn't");
2665 
2666 	if (m) {
2667 		m_freem(m);
2668 		mp->m_next = NULL;
2669 
2670 	}
2671 	if (mp->m_next != NULL)
2672 		panic("ti_hdr_split: last mbuf in chain should be null");
2673 }
2674 #endif /* TI_JUMBO_HDRSPLIT */
2675 
2676 /*
2677  * Frame reception handling. This is called if there's a frame
2678  * on the receive return list.
2679  *
2680  * Note: we have to be able to handle three possibilities here:
2681  * 1) the frame is from the mini receive ring (can only happen)
2682  *    on Tigon 2 boards)
2683  * 2) the frame is from the jumbo recieve ring
2684  * 3) the frame is from the standard receive ring
2685  */
2686 
2687 static void
2688 ti_rxeof(sc)
2689 	struct ti_softc		*sc;
2690 {
2691 	bus_dmamap_t		map;
2692 	struct ifnet		*ifp;
2693 	struct ti_cmd_desc	cmd;
2694 
2695 	TI_LOCK_ASSERT(sc);
2696 
2697 	ifp = sc->ti_ifp;
2698 
2699 	while (sc->ti_rx_saved_considx != sc->ti_return_prodidx.ti_idx) {
2700 		struct ti_rx_desc	*cur_rx;
2701 		u_int32_t		rxidx;
2702 		struct mbuf		*m = NULL;
2703 		u_int16_t		vlan_tag = 0;
2704 		int			have_tag = 0;
2705 
2706 		cur_rx =
2707 		    &sc->ti_rdata->ti_rx_return_ring[sc->ti_rx_saved_considx];
2708 		rxidx = cur_rx->ti_idx;
2709 		TI_INC(sc->ti_rx_saved_considx, TI_RETURN_RING_CNT);
2710 
2711 		if (cur_rx->ti_flags & TI_BDFLAG_VLAN_TAG) {
2712 			have_tag = 1;
2713 			vlan_tag = cur_rx->ti_vlan_tag & 0xfff;
2714 		}
2715 
2716 		if (cur_rx->ti_flags & TI_BDFLAG_JUMBO_RING) {
2717 
2718 			TI_INC(sc->ti_jumbo, TI_JUMBO_RX_RING_CNT);
2719 			m = sc->ti_cdata.ti_rx_jumbo_chain[rxidx];
2720 			sc->ti_cdata.ti_rx_jumbo_chain[rxidx] = NULL;
2721 			map = sc->ti_cdata.ti_rx_jumbo_maps[rxidx];
2722 			bus_dmamap_sync(sc->ti_jumbo_dmat, map,
2723 			    BUS_DMASYNC_POSTREAD);
2724 			bus_dmamap_unload(sc->ti_jumbo_dmat, map);
2725 			if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
2726 				ifp->if_ierrors++;
2727 				ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
2728 				continue;
2729 			}
2730 			if (ti_newbuf_jumbo(sc, sc->ti_jumbo, NULL) == ENOBUFS) {
2731 				ifp->if_ierrors++;
2732 				ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
2733 				continue;
2734 			}
2735 #ifdef TI_PRIVATE_JUMBOS
2736 			m->m_len = cur_rx->ti_len;
2737 #else /* TI_PRIVATE_JUMBOS */
2738 #ifdef TI_JUMBO_HDRSPLIT
2739 			if (sc->ti_hdrsplit)
2740 				ti_hdr_split(m, TI_HOSTADDR(cur_rx->ti_addr),
2741 					     cur_rx->ti_len, rxidx);
2742 			else
2743 #endif /* TI_JUMBO_HDRSPLIT */
2744 			m_adj(m, cur_rx->ti_len - m->m_pkthdr.len);
2745 #endif /* TI_PRIVATE_JUMBOS */
2746 		} else if (cur_rx->ti_flags & TI_BDFLAG_MINI_RING) {
2747 			TI_INC(sc->ti_mini, TI_MINI_RX_RING_CNT);
2748 			m = sc->ti_cdata.ti_rx_mini_chain[rxidx];
2749 			sc->ti_cdata.ti_rx_mini_chain[rxidx] = NULL;
2750 			map = sc->ti_cdata.ti_rx_mini_maps[rxidx];
2751 			bus_dmamap_sync(sc->ti_mbufrx_dmat, map,
2752 			    BUS_DMASYNC_POSTREAD);
2753 			bus_dmamap_unload(sc->ti_mbufrx_dmat, map);
2754 			if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
2755 				ifp->if_ierrors++;
2756 				ti_newbuf_mini(sc, sc->ti_mini, m);
2757 				continue;
2758 			}
2759 			if (ti_newbuf_mini(sc, sc->ti_mini, NULL) == ENOBUFS) {
2760 				ifp->if_ierrors++;
2761 				ti_newbuf_mini(sc, sc->ti_mini, m);
2762 				continue;
2763 			}
2764 			m->m_len = cur_rx->ti_len;
2765 		} else {
2766 			TI_INC(sc->ti_std, TI_STD_RX_RING_CNT);
2767 			m = sc->ti_cdata.ti_rx_std_chain[rxidx];
2768 			sc->ti_cdata.ti_rx_std_chain[rxidx] = NULL;
2769 			map = sc->ti_cdata.ti_rx_std_maps[rxidx];
2770 			bus_dmamap_sync(sc->ti_mbufrx_dmat, map,
2771 			    BUS_DMASYNC_POSTREAD);
2772 			bus_dmamap_unload(sc->ti_mbufrx_dmat, map);
2773 			if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
2774 				ifp->if_ierrors++;
2775 				ti_newbuf_std(sc, sc->ti_std, m);
2776 				continue;
2777 			}
2778 			if (ti_newbuf_std(sc, sc->ti_std, NULL) == ENOBUFS) {
2779 				ifp->if_ierrors++;
2780 				ti_newbuf_std(sc, sc->ti_std, m);
2781 				continue;
2782 			}
2783 			m->m_len = cur_rx->ti_len;
2784 		}
2785 
2786 		m->m_pkthdr.len = cur_rx->ti_len;
2787 		ifp->if_ipackets++;
2788 		m->m_pkthdr.rcvif = ifp;
2789 
2790 		if (ifp->if_hwassist) {
2791 			m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED |
2792 			    CSUM_DATA_VALID;
2793 			if ((cur_rx->ti_ip_cksum ^ 0xffff) == 0)
2794 				m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
2795 			m->m_pkthdr.csum_data = cur_rx->ti_tcp_udp_cksum;
2796 		}
2797 
2798 		/*
2799 		 * If we received a packet with a vlan tag,
2800 		 * tag it before passing the packet upward.
2801 		 */
2802 		if (have_tag) {
2803 			m->m_pkthdr.ether_vtag = vlan_tag;
2804 			m->m_flags |= M_VLANTAG;
2805 		}
2806 		TI_UNLOCK(sc);
2807 		(*ifp->if_input)(ifp, m);
2808 		TI_LOCK(sc);
2809 	}
2810 
2811 	/* Only necessary on the Tigon 1. */
2812 	if (sc->ti_hwrev == TI_HWREV_TIGON)
2813 		CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX,
2814 		    sc->ti_rx_saved_considx);
2815 
2816 	TI_UPDATE_STDPROD(sc, sc->ti_std);
2817 	TI_UPDATE_MINIPROD(sc, sc->ti_mini);
2818 	TI_UPDATE_JUMBOPROD(sc, sc->ti_jumbo);
2819 }
2820 
2821 static void
2822 ti_txeof(sc)
2823 	struct ti_softc		*sc;
2824 {
2825 	struct ti_txdesc	*txd;
2826 	struct ti_tx_desc	txdesc;
2827 	struct ti_tx_desc	*cur_tx = NULL;
2828 	struct ifnet		*ifp;
2829 	int			idx;
2830 
2831 	ifp = sc->ti_ifp;
2832 
2833 	txd = STAILQ_FIRST(&sc->ti_cdata.ti_txbusyq);
2834 	if (txd == NULL)
2835 		return;
2836 	/*
2837 	 * Go through our tx ring and free mbufs for those
2838 	 * frames that have been sent.
2839 	 */
2840 	for (idx = sc->ti_tx_saved_considx; idx != sc->ti_tx_considx.ti_idx;
2841 	    TI_INC(idx, TI_TX_RING_CNT)) {
2842 		if (sc->ti_hwrev == TI_HWREV_TIGON) {
2843 			ti_mem_read(sc, TI_TX_RING_BASE + idx * sizeof(txdesc),
2844 			    sizeof(txdesc), &txdesc);
2845 			cur_tx = &txdesc;
2846 		} else
2847 			cur_tx = &sc->ti_rdata->ti_tx_ring[idx];
2848 		sc->ti_txcnt--;
2849 		ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
2850 		if ((cur_tx->ti_flags & TI_BDFLAG_END) == 0)
2851 			continue;
2852 		bus_dmamap_sync(sc->ti_mbuftx_dmat, txd->tx_dmamap,
2853 		    BUS_DMASYNC_POSTWRITE);
2854 		bus_dmamap_unload(sc->ti_mbuftx_dmat, txd->tx_dmamap);
2855 
2856 		ifp->if_opackets++;
2857 		m_freem(txd->tx_m);
2858 		txd->tx_m = NULL;
2859 		STAILQ_REMOVE_HEAD(&sc->ti_cdata.ti_txbusyq, tx_q);
2860 		STAILQ_INSERT_TAIL(&sc->ti_cdata.ti_txfreeq, txd, tx_q);
2861 		txd = STAILQ_FIRST(&sc->ti_cdata.ti_txbusyq);
2862 	}
2863 	sc->ti_tx_saved_considx = idx;
2864 
2865 	sc->ti_timer = sc->ti_txcnt > 0 ? 5 : 0;
2866 }
2867 
2868 static void
2869 ti_intr(xsc)
2870 	void			*xsc;
2871 {
2872 	struct ti_softc		*sc;
2873 	struct ifnet		*ifp;
2874 
2875 	sc = xsc;
2876 	TI_LOCK(sc);
2877 	ifp = sc->ti_ifp;
2878 
2879 /*#ifdef notdef*/
2880 	/* Avoid this for now -- checking this register is expensive. */
2881 	/* Make sure this is really our interrupt. */
2882 	if (!(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_INTSTATE)) {
2883 		TI_UNLOCK(sc);
2884 		return;
2885 	}
2886 /*#endif*/
2887 
2888 	/* Ack interrupt and stop others from occuring. */
2889 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
2890 
2891 	if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
2892 		/* Check RX return ring producer/consumer */
2893 		ti_rxeof(sc);
2894 
2895 		/* Check TX ring producer/consumer */
2896 		ti_txeof(sc);
2897 	}
2898 
2899 	ti_handle_events(sc);
2900 
2901 	/* Re-enable interrupts. */
2902 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
2903 
2904 	if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
2905 	    ifp->if_snd.ifq_head != NULL)
2906 		ti_start_locked(ifp);
2907 
2908 	TI_UNLOCK(sc);
2909 }
2910 
2911 static void
2912 ti_stats_update(sc)
2913 	struct ti_softc		*sc;
2914 {
2915 	struct ifnet		*ifp;
2916 
2917 	ifp = sc->ti_ifp;
2918 
2919 	bus_dmamap_sync(sc->ti_rdata_dmat, sc->ti_rdata_dmamap,
2920 	    BUS_DMASYNC_POSTREAD);
2921 
2922 	ifp->if_collisions +=
2923 	   (sc->ti_rdata->ti_info.ti_stats.dot3StatsSingleCollisionFrames +
2924 	   sc->ti_rdata->ti_info.ti_stats.dot3StatsMultipleCollisionFrames +
2925 	   sc->ti_rdata->ti_info.ti_stats.dot3StatsExcessiveCollisions +
2926 	   sc->ti_rdata->ti_info.ti_stats.dot3StatsLateCollisions) -
2927 	   ifp->if_collisions;
2928 
2929 	bus_dmamap_sync(sc->ti_rdata_dmat, sc->ti_rdata_dmamap,
2930 	    BUS_DMASYNC_PREREAD);
2931 }
2932 
2933 /*
2934  * Encapsulate an mbuf chain in the tx ring  by coupling the mbuf data
2935  * pointers to descriptors.
2936  */
2937 static int
2938 ti_encap(sc, m_head)
2939 	struct ti_softc		*sc;
2940 	struct mbuf		**m_head;
2941 {
2942 	struct ti_txdesc	*txd;
2943 	struct ti_tx_desc	*f;
2944 	struct ti_tx_desc	txdesc;
2945 	struct mbuf		*m;
2946 	bus_dma_segment_t	txsegs[TI_MAXTXSEGS];
2947 	u_int16_t		csum_flags;
2948 	int			error, frag, i, nseg;
2949 
2950 	if ((txd = STAILQ_FIRST(&sc->ti_cdata.ti_txfreeq)) == NULL)
2951 		return (ENOBUFS);
2952 
2953 	error = bus_dmamap_load_mbuf_sg(sc->ti_mbuftx_dmat, txd->tx_dmamap,
2954 	    *m_head, txsegs, &nseg, 0);
2955 	if (error == EFBIG) {
2956 		m = m_defrag(*m_head, M_DONTWAIT);
2957 		if (m == NULL) {
2958 			m_freem(*m_head);
2959 			*m_head = NULL;
2960 			return (ENOMEM);
2961 		}
2962 		*m_head = m;
2963 		error = bus_dmamap_load_mbuf_sg(sc->ti_mbuftx_dmat,
2964 		    txd->tx_dmamap, *m_head, txsegs, &nseg, 0);
2965 		if (error) {
2966 			m_freem(*m_head);
2967 			*m_head = NULL;
2968 			return (error);
2969 		}
2970 	} else if (error != 0)
2971 		return (error);
2972 	if (nseg == 0) {
2973 		m_freem(*m_head);
2974 		*m_head = NULL;
2975 		return (EIO);
2976 	}
2977 
2978 	if (sc->ti_txcnt + nseg >= TI_TX_RING_CNT) {
2979 		bus_dmamap_unload(sc->ti_mbuftx_dmat, txd->tx_dmamap);
2980 		return (ENOBUFS);
2981 	}
2982 
2983 	m = *m_head;
2984 	csum_flags = 0;
2985 	if (m->m_pkthdr.csum_flags) {
2986 		if (m->m_pkthdr.csum_flags & CSUM_IP)
2987 			csum_flags |= TI_BDFLAG_IP_CKSUM;
2988 		if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
2989 			csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
2990 		if (m->m_flags & M_LASTFRAG)
2991 			csum_flags |= TI_BDFLAG_IP_FRAG_END;
2992 		else if (m->m_flags & M_FRAG)
2993 			csum_flags |= TI_BDFLAG_IP_FRAG;
2994 	}
2995 
2996 	bus_dmamap_sync(sc->ti_mbuftx_dmat, txd->tx_dmamap,
2997 	    BUS_DMASYNC_PREWRITE);
2998 	bus_dmamap_sync(sc->ti_rdata_dmat, sc->ti_rdata_dmamap,
2999 	    BUS_DMASYNC_PREWRITE);
3000 
3001 	frag = sc->ti_tx_saved_prodidx;
3002 	for (i = 0; i < nseg; i++) {
3003 		if (sc->ti_hwrev == TI_HWREV_TIGON) {
3004 			bzero(&txdesc, sizeof(txdesc));
3005 			f = &txdesc;
3006 		} else
3007 			f = &sc->ti_rdata->ti_tx_ring[frag];
3008 		ti_hostaddr64(&f->ti_addr, txsegs[i].ds_addr);
3009 		f->ti_len = txsegs[i].ds_len;
3010 		f->ti_flags = csum_flags;
3011 		if (m->m_flags & M_VLANTAG) {
3012 			f->ti_flags |= TI_BDFLAG_VLAN_TAG;
3013 			f->ti_vlan_tag = m->m_pkthdr.ether_vtag & 0xfff;
3014 		} else {
3015 			f->ti_vlan_tag = 0;
3016 		}
3017 
3018 		if (sc->ti_hwrev == TI_HWREV_TIGON)
3019 			ti_mem_write(sc, TI_TX_RING_BASE + frag *
3020 			    sizeof(txdesc), sizeof(txdesc), &txdesc);
3021 		TI_INC(frag, TI_TX_RING_CNT);
3022 	}
3023 
3024 	sc->ti_tx_saved_prodidx = frag;
3025 	/* set TI_BDFLAG_END on the last descriptor */
3026 	frag = (frag + TI_TX_RING_CNT - 1) % TI_TX_RING_CNT;
3027 	if (sc->ti_hwrev == TI_HWREV_TIGON) {
3028 		txdesc.ti_flags |= TI_BDFLAG_END;
3029 		ti_mem_write(sc, TI_TX_RING_BASE + frag * sizeof(txdesc),
3030 		    sizeof(txdesc), &txdesc);
3031 	} else
3032 		sc->ti_rdata->ti_tx_ring[frag].ti_flags |= TI_BDFLAG_END;
3033 
3034 	STAILQ_REMOVE_HEAD(&sc->ti_cdata.ti_txfreeq, tx_q);
3035 	STAILQ_INSERT_TAIL(&sc->ti_cdata.ti_txbusyq, txd, tx_q);
3036 	txd->tx_m = m;
3037 	sc->ti_txcnt += nseg;
3038 
3039 	return (0);
3040 }
3041 
3042 static void
3043 ti_start(ifp)
3044 	struct ifnet		*ifp;
3045 {
3046 	struct ti_softc		*sc;
3047 
3048 	sc = ifp->if_softc;
3049 	TI_LOCK(sc);
3050 	ti_start_locked(ifp);
3051 	TI_UNLOCK(sc);
3052 }
3053 
3054 /*
3055  * Main transmit routine. To avoid having to do mbuf copies, we put pointers
3056  * to the mbuf data regions directly in the transmit descriptors.
3057  */
3058 static void
3059 ti_start_locked(ifp)
3060 	struct ifnet		*ifp;
3061 {
3062 	struct ti_softc		*sc;
3063 	struct mbuf		*m_head = NULL;
3064 	int			enq = 0;
3065 
3066 	sc = ifp->if_softc;
3067 
3068 	for (; ifp->if_snd.ifq_head != NULL &&
3069 	    sc->ti_txcnt < (TI_TX_RING_CNT - 16);) {
3070 		IF_DEQUEUE(&ifp->if_snd, m_head);
3071 		if (m_head == NULL)
3072 			break;
3073 
3074 		/*
3075 		 * XXX
3076 		 * safety overkill.  If this is a fragmented packet chain
3077 		 * with delayed TCP/UDP checksums, then only encapsulate
3078 		 * it if we have enough descriptors to handle the entire
3079 		 * chain at once.
3080 		 * (paranoia -- may not actually be needed)
3081 		 */
3082 		if (m_head->m_flags & M_FIRSTFRAG &&
3083 		    m_head->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) {
3084 			if ((TI_TX_RING_CNT - sc->ti_txcnt) <
3085 			    m_head->m_pkthdr.csum_data + 16) {
3086 				IF_PREPEND(&ifp->if_snd, m_head);
3087 				ifp->if_drv_flags |= IFF_DRV_OACTIVE;
3088 				break;
3089 			}
3090 		}
3091 
3092 		/*
3093 		 * Pack the data into the transmit ring. If we
3094 		 * don't have room, set the OACTIVE flag and wait
3095 		 * for the NIC to drain the ring.
3096 		 */
3097 		if (ti_encap(sc, &m_head)) {
3098 			if (m_head == NULL)
3099 				break;
3100 			IF_PREPEND(&ifp->if_snd, m_head);
3101 			ifp->if_drv_flags |= IFF_DRV_OACTIVE;
3102 			break;
3103 		}
3104 
3105 		enq++;
3106 		/*
3107 		 * If there's a BPF listener, bounce a copy of this frame
3108 		 * to him.
3109 		 */
3110 		ETHER_BPF_MTAP(ifp, m_head);
3111 	}
3112 
3113 	if (enq > 0) {
3114 		/* Transmit */
3115 		CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, sc->ti_tx_saved_prodidx);
3116 
3117 		/*
3118 		 * Set a timeout in case the chip goes out to lunch.
3119 		 */
3120 		sc->ti_timer = 5;
3121 	}
3122 }
3123 
3124 static void
3125 ti_init(xsc)
3126 	void			*xsc;
3127 {
3128 	struct ti_softc		*sc;
3129 
3130 	sc = xsc;
3131 	TI_LOCK(sc);
3132 	ti_init_locked(sc);
3133 	TI_UNLOCK(sc);
3134 }
3135 
3136 static void
3137 ti_init_locked(xsc)
3138 	void			*xsc;
3139 {
3140 	struct ti_softc		*sc = xsc;
3141 
3142 	/* Cancel pending I/O and flush buffers. */
3143 	ti_stop(sc);
3144 
3145 	/* Init the gen info block, ring control blocks and firmware. */
3146 	if (ti_gibinit(sc)) {
3147 		device_printf(sc->ti_dev, "initialization failure\n");
3148 		return;
3149 	}
3150 }
3151 
3152 static void ti_init2(sc)
3153 	struct ti_softc		*sc;
3154 {
3155 	struct ti_cmd_desc	cmd;
3156 	struct ifnet		*ifp;
3157 	u_int8_t		*ea;
3158 	struct ifmedia		*ifm;
3159 	int			tmp;
3160 
3161 	TI_LOCK_ASSERT(sc);
3162 
3163 	ifp = sc->ti_ifp;
3164 
3165 	/* Specify MTU and interface index. */
3166 	CSR_WRITE_4(sc, TI_GCR_IFINDEX, sc->ti_unit);
3167 	CSR_WRITE_4(sc, TI_GCR_IFMTU, ifp->if_mtu +
3168 	    ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN);
3169 	TI_DO_CMD(TI_CMD_UPDATE_GENCOM, 0, 0);
3170 
3171 	/* Load our MAC address. */
3172 	ea = IF_LLADDR(sc->ti_ifp);
3173 	CSR_WRITE_4(sc, TI_GCR_PAR0, (ea[0] << 8) | ea[1]);
3174 	CSR_WRITE_4(sc, TI_GCR_PAR1,
3175 	    (ea[2] << 24) | (ea[3] << 16) | (ea[4] << 8) | ea[5]);
3176 	TI_DO_CMD(TI_CMD_SET_MAC_ADDR, 0, 0);
3177 
3178 	/* Enable or disable promiscuous mode as needed. */
3179 	if (ifp->if_flags & IFF_PROMISC) {
3180 		TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_ENB, 0);
3181 	} else {
3182 		TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_DIS, 0);
3183 	}
3184 
3185 	/* Program multicast filter. */
3186 	ti_setmulti(sc);
3187 
3188 	/*
3189 	 * If this is a Tigon 1, we should tell the
3190 	 * firmware to use software packet filtering.
3191 	 */
3192 	if (sc->ti_hwrev == TI_HWREV_TIGON) {
3193 		TI_DO_CMD(TI_CMD_FDR_FILTERING, TI_CMD_CODE_FILT_ENB, 0);
3194 	}
3195 
3196 	/* Init RX ring. */
3197 	ti_init_rx_ring_std(sc);
3198 
3199 	/* Init jumbo RX ring. */
3200 	if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN))
3201 		ti_init_rx_ring_jumbo(sc);
3202 
3203 	/*
3204 	 * If this is a Tigon 2, we can also configure the
3205 	 * mini ring.
3206 	 */
3207 	if (sc->ti_hwrev == TI_HWREV_TIGON_II)
3208 		ti_init_rx_ring_mini(sc);
3209 
3210 	CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX, 0);
3211 	sc->ti_rx_saved_considx = 0;
3212 
3213 	/* Init TX ring. */
3214 	ti_init_tx_ring(sc);
3215 
3216 	/* Tell firmware we're alive. */
3217 	TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_UP, 0);
3218 
3219 	/* Enable host interrupts. */
3220 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
3221 
3222 	ifp->if_drv_flags |= IFF_DRV_RUNNING;
3223 	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
3224 	callout_reset(&sc->ti_watchdog, hz, ti_watchdog, sc);
3225 
3226 	/*
3227 	 * Make sure to set media properly. We have to do this
3228 	 * here since we have to issue commands in order to set
3229 	 * the link negotiation and we can't issue commands until
3230 	 * the firmware is running.
3231 	 */
3232 	ifm = &sc->ifmedia;
3233 	tmp = ifm->ifm_media;
3234 	ifm->ifm_media = ifm->ifm_cur->ifm_media;
3235 	ti_ifmedia_upd(ifp);
3236 	ifm->ifm_media = tmp;
3237 }
3238 
3239 /*
3240  * Set media options.
3241  */
3242 static int
3243 ti_ifmedia_upd(ifp)
3244 	struct ifnet		*ifp;
3245 {
3246 	struct ti_softc		*sc;
3247 	struct ifmedia		*ifm;
3248 	struct ti_cmd_desc	cmd;
3249 	u_int32_t		flowctl;
3250 
3251 	sc = ifp->if_softc;
3252 	ifm = &sc->ifmedia;
3253 
3254 	if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
3255 		return (EINVAL);
3256 
3257 	flowctl = 0;
3258 
3259 	switch (IFM_SUBTYPE(ifm->ifm_media)) {
3260 	case IFM_AUTO:
3261 		/*
3262 		 * Transmit flow control doesn't work on the Tigon 1.
3263 		 */
3264 		flowctl = TI_GLNK_RX_FLOWCTL_Y;
3265 
3266 		/*
3267 		 * Transmit flow control can also cause problems on the
3268 		 * Tigon 2, apparantly with both the copper and fiber
3269 		 * boards.  The symptom is that the interface will just
3270 		 * hang.  This was reproduced with Alteon 180 switches.
3271 		 */
3272 #if 0
3273 		if (sc->ti_hwrev != TI_HWREV_TIGON)
3274 			flowctl |= TI_GLNK_TX_FLOWCTL_Y;
3275 #endif
3276 
3277 		CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
3278 		    TI_GLNK_FULL_DUPLEX| flowctl |
3279 		    TI_GLNK_AUTONEGENB|TI_GLNK_ENB);
3280 
3281 		flowctl = TI_LNK_RX_FLOWCTL_Y;
3282 #if 0
3283 		if (sc->ti_hwrev != TI_HWREV_TIGON)
3284 			flowctl |= TI_LNK_TX_FLOWCTL_Y;
3285 #endif
3286 
3287 		CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_100MB|TI_LNK_10MB|
3288 		    TI_LNK_FULL_DUPLEX|TI_LNK_HALF_DUPLEX| flowctl |
3289 		    TI_LNK_AUTONEGENB|TI_LNK_ENB);
3290 		TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
3291 		    TI_CMD_CODE_NEGOTIATE_BOTH, 0);
3292 		break;
3293 	case IFM_1000_SX:
3294 	case IFM_1000_T:
3295 		flowctl = TI_GLNK_RX_FLOWCTL_Y;
3296 #if 0
3297 		if (sc->ti_hwrev != TI_HWREV_TIGON)
3298 			flowctl |= TI_GLNK_TX_FLOWCTL_Y;
3299 #endif
3300 
3301 		CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
3302 		    flowctl |TI_GLNK_ENB);
3303 		CSR_WRITE_4(sc, TI_GCR_LINK, 0);
3304 		if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
3305 			TI_SETBIT(sc, TI_GCR_GLINK, TI_GLNK_FULL_DUPLEX);
3306 		}
3307 		TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
3308 		    TI_CMD_CODE_NEGOTIATE_GIGABIT, 0);
3309 		break;
3310 	case IFM_100_FX:
3311 	case IFM_10_FL:
3312 	case IFM_100_TX:
3313 	case IFM_10_T:
3314 		flowctl = TI_LNK_RX_FLOWCTL_Y;
3315 #if 0
3316 		if (sc->ti_hwrev != TI_HWREV_TIGON)
3317 			flowctl |= TI_LNK_TX_FLOWCTL_Y;
3318 #endif
3319 
3320 		CSR_WRITE_4(sc, TI_GCR_GLINK, 0);
3321 		CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_ENB|TI_LNK_PREF|flowctl);
3322 		if (IFM_SUBTYPE(ifm->ifm_media) == IFM_100_FX ||
3323 		    IFM_SUBTYPE(ifm->ifm_media) == IFM_100_TX) {
3324 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_100MB);
3325 		} else {
3326 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_10MB);
3327 		}
3328 		if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
3329 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_FULL_DUPLEX);
3330 		} else {
3331 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_HALF_DUPLEX);
3332 		}
3333 		TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
3334 		    TI_CMD_CODE_NEGOTIATE_10_100, 0);
3335 		break;
3336 	}
3337 
3338 	return (0);
3339 }
3340 
3341 /*
3342  * Report current media status.
3343  */
3344 static void
3345 ti_ifmedia_sts(ifp, ifmr)
3346 	struct ifnet		*ifp;
3347 	struct ifmediareq	*ifmr;
3348 {
3349 	struct ti_softc		*sc;
3350 	u_int32_t		media = 0;
3351 
3352 	sc = ifp->if_softc;
3353 
3354 	ifmr->ifm_status = IFM_AVALID;
3355 	ifmr->ifm_active = IFM_ETHER;
3356 
3357 	if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN)
3358 		return;
3359 
3360 	ifmr->ifm_status |= IFM_ACTIVE;
3361 
3362 	if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) {
3363 		media = CSR_READ_4(sc, TI_GCR_GLINK_STAT);
3364 		if (sc->ti_copper)
3365 			ifmr->ifm_active |= IFM_1000_T;
3366 		else
3367 			ifmr->ifm_active |= IFM_1000_SX;
3368 		if (media & TI_GLNK_FULL_DUPLEX)
3369 			ifmr->ifm_active |= IFM_FDX;
3370 		else
3371 			ifmr->ifm_active |= IFM_HDX;
3372 	} else if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) {
3373 		media = CSR_READ_4(sc, TI_GCR_LINK_STAT);
3374 		if (sc->ti_copper) {
3375 			if (media & TI_LNK_100MB)
3376 				ifmr->ifm_active |= IFM_100_TX;
3377 			if (media & TI_LNK_10MB)
3378 				ifmr->ifm_active |= IFM_10_T;
3379 		} else {
3380 			if (media & TI_LNK_100MB)
3381 				ifmr->ifm_active |= IFM_100_FX;
3382 			if (media & TI_LNK_10MB)
3383 				ifmr->ifm_active |= IFM_10_FL;
3384 		}
3385 		if (media & TI_LNK_FULL_DUPLEX)
3386 			ifmr->ifm_active |= IFM_FDX;
3387 		if (media & TI_LNK_HALF_DUPLEX)
3388 			ifmr->ifm_active |= IFM_HDX;
3389 	}
3390 }
3391 
3392 static int
3393 ti_ioctl(ifp, command, data)
3394 	struct ifnet		*ifp;
3395 	u_long			command;
3396 	caddr_t			data;
3397 {
3398 	struct ti_softc		*sc = ifp->if_softc;
3399 	struct ifreq		*ifr = (struct ifreq *) data;
3400 	int			mask, error = 0;
3401 	struct ti_cmd_desc	cmd;
3402 
3403 	switch (command) {
3404 	case SIOCSIFMTU:
3405 		TI_LOCK(sc);
3406 		if (ifr->ifr_mtu > TI_JUMBO_MTU)
3407 			error = EINVAL;
3408 		else {
3409 			ifp->if_mtu = ifr->ifr_mtu;
3410 			ti_init_locked(sc);
3411 		}
3412 		TI_UNLOCK(sc);
3413 		break;
3414 	case SIOCSIFFLAGS:
3415 		TI_LOCK(sc);
3416 		if (ifp->if_flags & IFF_UP) {
3417 			/*
3418 			 * If only the state of the PROMISC flag changed,
3419 			 * then just use the 'set promisc mode' command
3420 			 * instead of reinitializing the entire NIC. Doing
3421 			 * a full re-init means reloading the firmware and
3422 			 * waiting for it to start up, which may take a
3423 			 * second or two.
3424 			 */
3425 			if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
3426 			    ifp->if_flags & IFF_PROMISC &&
3427 			    !(sc->ti_if_flags & IFF_PROMISC)) {
3428 				TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
3429 				    TI_CMD_CODE_PROMISC_ENB, 0);
3430 			} else if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
3431 			    !(ifp->if_flags & IFF_PROMISC) &&
3432 			    sc->ti_if_flags & IFF_PROMISC) {
3433 				TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
3434 				    TI_CMD_CODE_PROMISC_DIS, 0);
3435 			} else
3436 				ti_init_locked(sc);
3437 		} else {
3438 			if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
3439 				ti_stop(sc);
3440 			}
3441 		}
3442 		sc->ti_if_flags = ifp->if_flags;
3443 		TI_UNLOCK(sc);
3444 		break;
3445 	case SIOCADDMULTI:
3446 	case SIOCDELMULTI:
3447 		TI_LOCK(sc);
3448 		if (ifp->if_drv_flags & IFF_DRV_RUNNING)
3449 			ti_setmulti(sc);
3450 		TI_UNLOCK(sc);
3451 		break;
3452 	case SIOCSIFMEDIA:
3453 	case SIOCGIFMEDIA:
3454 		error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
3455 		break;
3456 	case SIOCSIFCAP:
3457 		TI_LOCK(sc);
3458 		mask = ifr->ifr_reqcap ^ ifp->if_capenable;
3459 		if (mask & IFCAP_HWCSUM) {
3460 			if (IFCAP_HWCSUM & ifp->if_capenable)
3461 				ifp->if_capenable &= ~IFCAP_HWCSUM;
3462 			else
3463 				ifp->if_capenable |= IFCAP_HWCSUM;
3464 			if (ifp->if_drv_flags & IFF_DRV_RUNNING)
3465 				ti_init_locked(sc);
3466 		}
3467 		TI_UNLOCK(sc);
3468 		break;
3469 	default:
3470 		error = ether_ioctl(ifp, command, data);
3471 		break;
3472 	}
3473 
3474 	return (error);
3475 }
3476 
3477 static int
3478 ti_open(struct cdev *dev, int flags, int fmt, struct thread *td)
3479 {
3480 	struct ti_softc *sc;
3481 
3482 	sc = dev->si_drv1;
3483 	if (sc == NULL)
3484 		return (ENODEV);
3485 
3486 	TI_LOCK(sc);
3487 	sc->ti_flags |= TI_FLAG_DEBUGING;
3488 	TI_UNLOCK(sc);
3489 
3490 	return (0);
3491 }
3492 
3493 static int
3494 ti_close(struct cdev *dev, int flag, int fmt, struct thread *td)
3495 {
3496 	struct ti_softc *sc;
3497 
3498 	sc = dev->si_drv1;
3499 	if (sc == NULL)
3500 		return (ENODEV);
3501 
3502 	TI_LOCK(sc);
3503 	sc->ti_flags &= ~TI_FLAG_DEBUGING;
3504 	TI_UNLOCK(sc);
3505 
3506 	return (0);
3507 }
3508 
3509 /*
3510  * This ioctl routine goes along with the Tigon character device.
3511  */
3512 static int
3513 ti_ioctl2(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
3514     struct thread *td)
3515 {
3516 	int error;
3517 	struct ti_softc *sc;
3518 
3519 	sc = dev->si_drv1;
3520 	if (sc == NULL)
3521 		return (ENODEV);
3522 
3523 	error = 0;
3524 
3525 	switch (cmd) {
3526 	case TIIOCGETSTATS:
3527 	{
3528 		struct ti_stats *outstats;
3529 
3530 		outstats = (struct ti_stats *)addr;
3531 
3532 		TI_LOCK(sc);
3533 		bcopy(&sc->ti_rdata->ti_info.ti_stats, outstats,
3534 		      sizeof(struct ti_stats));
3535 		TI_UNLOCK(sc);
3536 		break;
3537 	}
3538 	case TIIOCGETPARAMS:
3539 	{
3540 		struct ti_params	*params;
3541 
3542 		params = (struct ti_params *)addr;
3543 
3544 		TI_LOCK(sc);
3545 		params->ti_stat_ticks = sc->ti_stat_ticks;
3546 		params->ti_rx_coal_ticks = sc->ti_rx_coal_ticks;
3547 		params->ti_tx_coal_ticks = sc->ti_tx_coal_ticks;
3548 		params->ti_rx_max_coal_bds = sc->ti_rx_max_coal_bds;
3549 		params->ti_tx_max_coal_bds = sc->ti_tx_max_coal_bds;
3550 		params->ti_tx_buf_ratio = sc->ti_tx_buf_ratio;
3551 		params->param_mask = TI_PARAM_ALL;
3552 		TI_UNLOCK(sc);
3553 
3554 		error = 0;
3555 
3556 		break;
3557 	}
3558 	case TIIOCSETPARAMS:
3559 	{
3560 		struct ti_params *params;
3561 
3562 		params = (struct ti_params *)addr;
3563 
3564 		TI_LOCK(sc);
3565 		if (params->param_mask & TI_PARAM_STAT_TICKS) {
3566 			sc->ti_stat_ticks = params->ti_stat_ticks;
3567 			CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks);
3568 		}
3569 
3570 		if (params->param_mask & TI_PARAM_RX_COAL_TICKS) {
3571 			sc->ti_rx_coal_ticks = params->ti_rx_coal_ticks;
3572 			CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS,
3573 				    sc->ti_rx_coal_ticks);
3574 		}
3575 
3576 		if (params->param_mask & TI_PARAM_TX_COAL_TICKS) {
3577 			sc->ti_tx_coal_ticks = params->ti_tx_coal_ticks;
3578 			CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS,
3579 				    sc->ti_tx_coal_ticks);
3580 		}
3581 
3582 		if (params->param_mask & TI_PARAM_RX_COAL_BDS) {
3583 			sc->ti_rx_max_coal_bds = params->ti_rx_max_coal_bds;
3584 			CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD,
3585 				    sc->ti_rx_max_coal_bds);
3586 		}
3587 
3588 		if (params->param_mask & TI_PARAM_TX_COAL_BDS) {
3589 			sc->ti_tx_max_coal_bds = params->ti_tx_max_coal_bds;
3590 			CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD,
3591 				    sc->ti_tx_max_coal_bds);
3592 		}
3593 
3594 		if (params->param_mask & TI_PARAM_TX_BUF_RATIO) {
3595 			sc->ti_tx_buf_ratio = params->ti_tx_buf_ratio;
3596 			CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO,
3597 				    sc->ti_tx_buf_ratio);
3598 		}
3599 		TI_UNLOCK(sc);
3600 
3601 		error = 0;
3602 
3603 		break;
3604 	}
3605 	case TIIOCSETTRACE: {
3606 		ti_trace_type	trace_type;
3607 
3608 		trace_type = *(ti_trace_type *)addr;
3609 
3610 		/*
3611 		 * Set tracing to whatever the user asked for.  Setting
3612 		 * this register to 0 should have the effect of disabling
3613 		 * tracing.
3614 		 */
3615 		CSR_WRITE_4(sc, TI_GCR_NIC_TRACING, trace_type);
3616 
3617 		error = 0;
3618 
3619 		break;
3620 	}
3621 	case TIIOCGETTRACE: {
3622 		struct ti_trace_buf	*trace_buf;
3623 		u_int32_t		trace_start, cur_trace_ptr, trace_len;
3624 
3625 		trace_buf = (struct ti_trace_buf *)addr;
3626 
3627 		TI_LOCK(sc);
3628 		trace_start = CSR_READ_4(sc, TI_GCR_NICTRACE_START);
3629 		cur_trace_ptr = CSR_READ_4(sc, TI_GCR_NICTRACE_PTR);
3630 		trace_len = CSR_READ_4(sc, TI_GCR_NICTRACE_LEN);
3631 
3632 #if 0
3633 		if_printf(sc->ti_ifp, "trace_start = %#x, cur_trace_ptr = %#x, "
3634 		       "trace_len = %d\n", trace_start,
3635 		       cur_trace_ptr, trace_len);
3636 		if_printf(sc->ti_ifp, "trace_buf->buf_len = %d\n",
3637 		       trace_buf->buf_len);
3638 #endif
3639 
3640 		error = ti_copy_mem(sc, trace_start, min(trace_len,
3641 				    trace_buf->buf_len),
3642 				    (caddr_t)trace_buf->buf, 1, 1);
3643 
3644 		if (error == 0) {
3645 			trace_buf->fill_len = min(trace_len,
3646 						  trace_buf->buf_len);
3647 			if (cur_trace_ptr < trace_start)
3648 				trace_buf->cur_trace_ptr =
3649 					trace_start - cur_trace_ptr;
3650 			else
3651 				trace_buf->cur_trace_ptr =
3652 					cur_trace_ptr - trace_start;
3653 		} else
3654 			trace_buf->fill_len = 0;
3655 		TI_UNLOCK(sc);
3656 
3657 		break;
3658 	}
3659 
3660 	/*
3661 	 * For debugging, five ioctls are needed:
3662 	 * ALT_ATTACH
3663 	 * ALT_READ_TG_REG
3664 	 * ALT_WRITE_TG_REG
3665 	 * ALT_READ_TG_MEM
3666 	 * ALT_WRITE_TG_MEM
3667 	 */
3668 	case ALT_ATTACH:
3669 		/*
3670 		 * From what I can tell, Alteon's Solaris Tigon driver
3671 		 * only has one character device, so you have to attach
3672 		 * to the Tigon board you're interested in.  This seems
3673 		 * like a not-so-good way to do things, since unless you
3674 		 * subsequently specify the unit number of the device
3675 		 * you're interested in every ioctl, you'll only be
3676 		 * able to debug one board at a time.
3677 		 */
3678 		error = 0;
3679 		break;
3680 	case ALT_READ_TG_MEM:
3681 	case ALT_WRITE_TG_MEM:
3682 	{
3683 		struct tg_mem *mem_param;
3684 		u_int32_t sram_end, scratch_end;
3685 
3686 		mem_param = (struct tg_mem *)addr;
3687 
3688 		if (sc->ti_hwrev == TI_HWREV_TIGON) {
3689 			sram_end = TI_END_SRAM_I;
3690 			scratch_end = TI_END_SCRATCH_I;
3691 		} else {
3692 			sram_end = TI_END_SRAM_II;
3693 			scratch_end = TI_END_SCRATCH_II;
3694 		}
3695 
3696 		/*
3697 		 * For now, we'll only handle accessing regular SRAM,
3698 		 * nothing else.
3699 		 */
3700 		TI_LOCK(sc);
3701 		if ((mem_param->tgAddr >= TI_BEG_SRAM)
3702 		 && ((mem_param->tgAddr + mem_param->len) <= sram_end)) {
3703 			/*
3704 			 * In this instance, we always copy to/from user
3705 			 * space, so the user space argument is set to 1.
3706 			 */
3707 			error = ti_copy_mem(sc, mem_param->tgAddr,
3708 					    mem_param->len,
3709 					    mem_param->userAddr, 1,
3710 					    (cmd == ALT_READ_TG_MEM) ? 1 : 0);
3711 		} else if ((mem_param->tgAddr >= TI_BEG_SCRATCH)
3712 			&& (mem_param->tgAddr <= scratch_end)) {
3713 			error = ti_copy_scratch(sc, mem_param->tgAddr,
3714 						mem_param->len,
3715 						mem_param->userAddr, 1,
3716 						(cmd == ALT_READ_TG_MEM) ?
3717 						1 : 0, TI_PROCESSOR_A);
3718 		} else if ((mem_param->tgAddr >= TI_BEG_SCRATCH_B_DEBUG)
3719 			&& (mem_param->tgAddr <= TI_BEG_SCRATCH_B_DEBUG)) {
3720 			if (sc->ti_hwrev == TI_HWREV_TIGON) {
3721 				if_printf(sc->ti_ifp,
3722 				    "invalid memory range for Tigon I\n");
3723 				error = EINVAL;
3724 				break;
3725 			}
3726 			error = ti_copy_scratch(sc, mem_param->tgAddr -
3727 						TI_SCRATCH_DEBUG_OFF,
3728 						mem_param->len,
3729 						mem_param->userAddr, 1,
3730 						(cmd == ALT_READ_TG_MEM) ?
3731 						1 : 0, TI_PROCESSOR_B);
3732 		} else {
3733 			if_printf(sc->ti_ifp, "memory address %#x len %d is "
3734 			        "out of supported range\n",
3735 			        mem_param->tgAddr, mem_param->len);
3736 			error = EINVAL;
3737 		}
3738 		TI_UNLOCK(sc);
3739 
3740 		break;
3741 	}
3742 	case ALT_READ_TG_REG:
3743 	case ALT_WRITE_TG_REG:
3744 	{
3745 		struct tg_reg	*regs;
3746 		u_int32_t	tmpval;
3747 
3748 		regs = (struct tg_reg *)addr;
3749 
3750 		/*
3751 		 * Make sure the address in question isn't out of range.
3752 		 */
3753 		if (regs->addr > TI_REG_MAX) {
3754 			error = EINVAL;
3755 			break;
3756 		}
3757 		TI_LOCK(sc);
3758 		if (cmd == ALT_READ_TG_REG) {
3759 			bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
3760 						regs->addr, &tmpval, 1);
3761 			regs->data = ntohl(tmpval);
3762 #if 0
3763 			if ((regs->addr == TI_CPU_STATE)
3764 			 || (regs->addr == TI_CPU_CTL_B)) {
3765 				if_printf(sc->ti_ifp, "register %#x = %#x\n",
3766 				       regs->addr, tmpval);
3767 			}
3768 #endif
3769 		} else {
3770 			tmpval = htonl(regs->data);
3771 			bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
3772 						 regs->addr, &tmpval, 1);
3773 		}
3774 		TI_UNLOCK(sc);
3775 
3776 		break;
3777 	}
3778 	default:
3779 		error = ENOTTY;
3780 		break;
3781 	}
3782 	return (error);
3783 }
3784 
3785 static void
3786 ti_watchdog(void *arg)
3787 {
3788 	struct ti_softc		*sc;
3789 	struct ifnet		*ifp;
3790 
3791 	sc = arg;
3792 	TI_LOCK_ASSERT(sc);
3793 	callout_reset(&sc->ti_watchdog, hz, ti_watchdog, sc);
3794 	if (sc->ti_timer == 0 || --sc->ti_timer > 0)
3795 		return;
3796 
3797 	/*
3798 	 * When we're debugging, the chip is often stopped for long periods
3799 	 * of time, and that would normally cause the watchdog timer to fire.
3800 	 * Since that impedes debugging, we don't want to do that.
3801 	 */
3802 	if (sc->ti_flags & TI_FLAG_DEBUGING)
3803 		return;
3804 
3805 	ifp = sc->ti_ifp;
3806 	if_printf(ifp, "watchdog timeout -- resetting\n");
3807 	ti_stop(sc);
3808 	ti_init_locked(sc);
3809 
3810 	ifp->if_oerrors++;
3811 }
3812 
3813 /*
3814  * Stop the adapter and free any mbufs allocated to the
3815  * RX and TX lists.
3816  */
3817 static void
3818 ti_stop(sc)
3819 	struct ti_softc		*sc;
3820 {
3821 	struct ifnet		*ifp;
3822 	struct ti_cmd_desc	cmd;
3823 
3824 	TI_LOCK_ASSERT(sc);
3825 
3826 	ifp = sc->ti_ifp;
3827 
3828 	/* Disable host interrupts. */
3829 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
3830 	/*
3831 	 * Tell firmware we're shutting down.
3832 	 */
3833 	TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_DOWN, 0);
3834 
3835 	/* Halt and reinitialize. */
3836 	if (ti_chipinit(sc) != 0)
3837 		return;
3838 	ti_mem_zero(sc, 0x2000, 0x100000 - 0x2000);
3839 	if (ti_chipinit(sc) != 0)
3840 		return;
3841 
3842 	/* Free the RX lists. */
3843 	ti_free_rx_ring_std(sc);
3844 
3845 	/* Free jumbo RX list. */
3846 	ti_free_rx_ring_jumbo(sc);
3847 
3848 	/* Free mini RX list. */
3849 	ti_free_rx_ring_mini(sc);
3850 
3851 	/* Free TX buffers. */
3852 	ti_free_tx_ring(sc);
3853 
3854 	sc->ti_ev_prodidx.ti_idx = 0;
3855 	sc->ti_return_prodidx.ti_idx = 0;
3856 	sc->ti_tx_considx.ti_idx = 0;
3857 	sc->ti_tx_saved_considx = TI_TXCONS_UNSET;
3858 
3859 	ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
3860 	callout_stop(&sc->ti_watchdog);
3861 }
3862 
3863 /*
3864  * Stop all chip I/O so that the kernel's probe routines don't
3865  * get confused by errant DMAs when rebooting.
3866  */
3867 static int
3868 ti_shutdown(dev)
3869 	device_t		dev;
3870 {
3871 	struct ti_softc		*sc;
3872 
3873 	sc = device_get_softc(dev);
3874 	TI_LOCK(sc);
3875 	ti_chipinit(sc);
3876 	TI_UNLOCK(sc);
3877 
3878 	return (0);
3879 }
3880