1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010 5 * PCI-SCSI controllers. 6 * 7 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> 8 * 9 * This driver also supports the following Symbios/LSI PCI-SCSI chips: 10 * 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895, 11 * 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode. 12 * 13 * 14 * This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver. 15 * Copyright (C) 1998-1999 Gerard Roudier 16 * 17 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 18 * a port of the FreeBSD ncr driver to Linux-1.2.13. 19 * 20 * The original ncr driver has been written for 386bsd and FreeBSD by 21 * Wolfgang Stanglmeier <wolf@cologne.de> 22 * Stefan Esser <se@mi.Uni-Koeln.de> 23 * Copyright (C) 1994 Wolfgang Stanglmeier 24 * 25 * The initialisation code, and part of the code that addresses 26 * FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM 27 * written by Justin T. Gibbs. 28 * 29 * Other major contributions: 30 * 31 * NVRAM detection and reading. 32 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> 33 * 34 *----------------------------------------------------------------------------- 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 3. The name of the author may not be used to endorse or promote products 45 * derived from this software without specific prior written permission. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND 48 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 49 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 50 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 51 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 52 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 53 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 54 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 55 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 56 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 57 * SUCH DAMAGE. 58 */ 59 60 /* $FreeBSD$ */ 61 62 #ifndef SYM_CONF_H 63 #define SYM_CONF_H 64 65 /*------------------------------------------------------------------- 66 * Static configuration. 67 *------------------------------------------------------------------- 68 */ 69 70 /* 71 * Also support early NCR 810, 815 and 825 chips. 72 */ 73 #define SYM_CONF_GENERIC_SUPPORT 74 75 /* 76 * Use Normal IO instead of MMIO. 77 */ 78 /* #define SYM_CONF_IOMAPPED */ 79 80 /* 81 * Max tags for a device (logical unit) 82 * We use a power of 2, (7) means 2<<7=128 83 * Maximum is 8 -> 256 tags 84 */ 85 #define SYM_CONF_MAX_TAG_ORDER (6) 86 87 /* 88 * DMA boundary 89 * We need to ensure 16 MB boundaries not to be crossed during DMA of 90 * each segment, due to some chips being flawed. 91 */ 92 #define SYM_CONF_DMA_BOUNDARY (1UL << 24) 93 94 /* 95 * Max number of scatter/gather entries for an I/O. 96 * Each entry costs 8 bytes in the internal CCB data structure. 97 * We use at most 33 segments but also no more than required for handling 98 * MAXPHYS. 99 */ 100 #define SYM_CONF_MAX_SG (MIN(33, (MAXPHYS / PAGE_SIZE) + 1)) 101 102 /* 103 * Max number of targets. 104 * Maximum is 16 and you are advised not to change this value. 105 */ 106 #define SYM_CONF_MAX_TARGET (16) 107 108 /* 109 * Max number of logical units. 110 * SPI-2 allows up to 64 logical units, but in real life, target 111 * that implements more that 7 logical units are pretty rare. 112 * Anyway, the cost of accepting up to 64 logical unit is low in 113 * this driver, thus going with the maximum is acceptable. 114 */ 115 #define SYM_CONF_MAX_LUN (64) 116 117 /* 118 * Max number of IO control blocks queued to the controller. 119 * Each entry needs 8 bytes and the queues are allocated contiguously. 120 * Since we donnot want to allocate more than a page, the theorical 121 * maximum is PAGE_SIZE/8. For safety, we announce a bit less to the 122 * access method. :) 123 * When not supplied, as it is suggested, the driver compute some 124 * good value for this parameter. 125 */ 126 /* #define SYM_CONF_MAX_START (PAGE_SIZE/8 - 16) */ 127 128 /* 129 * Support for NVRAM. 130 */ 131 #define SYM_CONF_NVRAM_SUPPORT 132 /* #define SYM_CONF_NVRAM_SUPPORT */ 133 134 /* 135 * Support for Immediate Arbitration. 136 * Not advised. 137 */ 138 /* #define SYM_CONF_IARB_SUPPORT */ 139 140 /*------------------------------------------------------------------- 141 * Configuration that could be dynamic if it was possible 142 * to pass arguments to the driver. 143 *------------------------------------------------------------------- 144 */ 145 146 /* 147 * HOST default scsi id. 148 */ 149 #define SYM_SETUP_HOST_ID 7 150 151 /* 152 * Max synchronous transfers. 153 */ 154 #define SYM_SETUP_MIN_SYNC (9) 155 156 /* 157 * Max wide order. 158 */ 159 #define SYM_SETUP_MAX_WIDE (1) 160 161 /* 162 * Max SCSI offset. 163 */ 164 #define SYM_SETUP_MAX_OFFS (63) 165 166 /* 167 * Default number of tags. 168 */ 169 #define SYM_SETUP_MAX_TAG (1<<SYM_CONF_MAX_TAG_ORDER) 170 171 /* 172 * SYMBIOS NVRAM format support. 173 */ 174 #define SYM_SETUP_SYMBIOS_NVRAM (1) 175 176 /* 177 * TEKRAM NVRAM format support. 178 */ 179 #define SYM_SETUP_TEKRAM_NVRAM (1) 180 181 /* 182 * PCI parity checking. 183 * It should not be an option, but some poor or broken 184 * PCI-HOST bridges have been reported to make problems 185 * when this feature is enabled. 186 * Setting this option to 0 tells the driver not to 187 * enable the checking against PCI parity. 188 */ 189 #ifndef SYM_SETUP_PCI_PARITY 190 #define SYM_SETUP_PCI_PARITY (1) 191 #endif 192 193 /* 194 * SCSI parity checking. 195 */ 196 #define SYM_SETUP_SCSI_PARITY (1) 197 198 /* 199 * SCSI activity LED. 200 */ 201 #define SYM_SETUP_SCSI_LED (0) 202 203 /* 204 * SCSI High Voltage Differential support. 205 * 206 * HVD/LVD/SE capable controllers (895, 895A, 896, 1010) 207 * report the actual SCSI BUS mode from the STEST4 IO 208 * register. 209 * 210 * But for HVD/SE only capable chips (825a, 875, 885), 211 * the driver uses some heuristic to probe against HVD. 212 * Normally, the chip senses the DIFFSENS signal and 213 * should switch its BUS tranceivers to high impedance 214 * in situation of the driver having been wrong about 215 * the actual BUS mode. May-be, the BUS mode probing of 216 * the driver is safe, but, given that it may be partially 217 * based on some previous IO register settings, it 218 * cannot be stated so. Thus, decision has been taken 219 * to require a user option to be set for the DIFF probing 220 * to be applied for the 825a, 875 and 885 chips. 221 * 222 * This setup option works as follows: 223 * 224 * 0 -> HVD only supported for 895, 895A, 896, 1010. 225 * 1 -> HVD probed for 825A, 875, 885. 226 * 2 -> HVD assumed for 825A, 875, 885 (not advised). 227 */ 228 #ifndef SYM_SETUP_SCSI_DIFF 229 #define SYM_SETUP_SCSI_DIFF (0) 230 #endif 231 232 /* 233 * IRQ mode. 234 */ 235 #define SYM_SETUP_IRQ_MODE (0) 236 237 /* 238 * Check SCSI BUS signal on reset. 239 */ 240 #define SYM_SETUP_SCSI_BUS_CHECK (1) 241 242 /* 243 * Max burst for PCI (1<<value) 244 * 7 means: (1<<7) = 128 DWORDS. 245 */ 246 #define SYM_SETUP_BURST_ORDER (7) 247 248 /* 249 * Only relevant if IARB support configured. 250 * - Max number of successive settings of IARB hints. 251 * - Set IARB on arbitration lost. 252 */ 253 #define SYM_CONF_IARB_MAX 3 254 #define SYM_CONF_SET_IARB_ON_ARB_LOST 1 255 256 /* 257 * Returning wrong residuals may make problems. 258 * When zero, this define tells the driver to 259 * always return 0 as transfer residual. 260 * Btw, all my testings of residuals have succeeded. 261 */ 262 #define SYM_CONF_RESIDUAL_SUPPORT 1 263 264 /* 265 * Supported maximum number of LUNs to announce to 266 * the access method. 267 * The driver supports up to 64 LUNs per target as 268 * required by SPI-2/SPI-3. However some SCSI devices 269 * designed prior to these specifications or not being 270 * conformant may be highly confused when they are 271 * asked about a LUN > 7. 272 */ 273 #ifndef SYM_SETUP_MAX_LUN 274 #define SYM_SETUP_MAX_LUN (8) 275 #endif 276 277 /* 278 * Low priority probe map. 279 * 280 * This option is used as a bitmap to tell the driver 281 * about chips that are to be claimed with a low priority 282 * (-2000) by the probe method. This allows any other driver 283 * that may return some higher priority value for the same 284 * chips to take precedence over this driver (sym). 285 * This option may be used when both the ncr driver and this 286 * driver are configured. 287 * 288 * Bits are to be coded as follows: 289 * 0x01 -> 810a, 860 290 * 0x02 -> 825a, 875, 885, 895 291 * 0x04 -> 895a, 896, 1510d 292 * 0x08 -> 1010 293 * 0x40 -> 810, 815, 825 294 * 295 * For example, value 5 tells the driver to claim support 296 * for 810a, 860, 895a, 896 and 1510d with low priority, 297 * allowing the ncr driver to take precedence if configured. 298 */ 299 #ifndef SYM_SETUP_LP_PROBE_MAP 300 #define SYM_SETUP_LP_PROBE_MAP 0 301 #endif 302 303 #endif /* SYM_CONF_H */ 304