1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause 3 * 4 * Copyright 2008 by Marco Trillo. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 /*- 30 * Copyright (c) 2002, 2003 Tsubai Masanari. All rights reserved. 31 * 32 * Redistribution and use in source and binary forms, with or without 33 * modification, are permitted provided that the following conditions 34 * are met: 35 * 1. Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * 2. Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in the 39 * documentation and/or other materials provided with the distribution. 40 * 3. The name of the author may not be used to endorse or promote products 41 * derived from this software without specific prior written permission. 42 * 43 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 44 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 45 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 46 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 47 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 48 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 53 * 54 * NetBSD: snapper.c,v 1.28 2008/05/16 03:49:54 macallan Exp 55 * Id: snapper.c,v 1.11 2002/10/31 17:42:13 tsubai Exp 56 */ 57 58 /* 59 * Apple I2S audio controller. 60 */ 61 62 #include <sys/param.h> 63 #include <sys/systm.h> 64 #include <sys/kernel.h> 65 #include <sys/module.h> 66 #include <sys/bus.h> 67 #include <sys/malloc.h> 68 #include <sys/lock.h> 69 #include <sys/mutex.h> 70 #include <machine/dbdma.h> 71 #include <machine/intr_machdep.h> 72 #include <machine/resource.h> 73 #include <machine/bus.h> 74 #include <machine/pio.h> 75 #include <sys/rman.h> 76 #include <dev/ofw/ofw_bus.h> 77 78 #ifdef HAVE_KERNEL_OPTION_HEADERS 79 #include "opt_snd.h" 80 #endif 81 82 #include <dev/sound/pcm/sound.h> 83 #include <dev/sound/macio/aoa.h> 84 85 #include <powerpc/powermac/macgpiovar.h> 86 87 struct i2s_softc { 88 struct aoa_softc aoa; 89 phandle_t node; 90 phandle_t soundnode; 91 struct resource *reg; 92 u_int output_mask; 93 struct mtx port_mtx; 94 }; 95 96 static int i2s_probe(device_t); 97 static int i2s_attach(device_t); 98 static void i2s_postattach(void *); 99 static int i2s_setup(struct i2s_softc *, u_int, u_int, u_int); 100 static void i2s_mute_headphone (struct i2s_softc *, int); 101 static void i2s_mute_lineout (struct i2s_softc *, int); 102 static void i2s_mute_speaker (struct i2s_softc *, int); 103 static void i2s_set_outputs(void *, u_int); 104 105 static struct intr_config_hook *i2s_delayed_attach = NULL; 106 107 kobj_class_t i2s_mixer_class = NULL; 108 device_t i2s_mixer = NULL; 109 110 static device_method_t pcm_i2s_methods[] = { 111 /* Device interface. */ 112 DEVMETHOD(device_probe, i2s_probe), 113 DEVMETHOD(device_attach, i2s_attach), 114 115 { 0, 0 } 116 }; 117 118 static driver_t pcm_i2s_driver = { 119 "pcm", 120 pcm_i2s_methods, 121 PCM_SOFTC_SIZE 122 }; 123 124 DRIVER_MODULE(pcm_i2s, macio, pcm_i2s_driver, pcm_devclass, 0, 0); 125 MODULE_DEPEND(pcm_i2s, sound, SOUND_MINVER, SOUND_PREFVER, SOUND_MAXVER); 126 127 static int aoagpio_probe(device_t); 128 static int aoagpio_attach(device_t); 129 130 static device_method_t aoagpio_methods[] = { 131 /* Device interface. */ 132 DEVMETHOD(device_probe, aoagpio_probe), 133 DEVMETHOD(device_attach, aoagpio_attach), 134 135 { 0, 0 } 136 }; 137 138 struct aoagpio_softc { 139 device_t dev; 140 int ctrl; 141 int detect_active; /* for extint-gpio */ 142 int level; /* for extint-gpio */ 143 struct i2s_softc *i2s; /* for extint-gpio */ 144 }; 145 146 static driver_t aoagpio_driver = { 147 "aoagpio", 148 aoagpio_methods, 149 sizeof(struct aoagpio_softc) 150 }; 151 static devclass_t aoagpio_devclass; 152 153 DRIVER_MODULE(aoagpio, macgpio, aoagpio_driver, aoagpio_devclass, 0, 0); 154 155 156 /***************************************************************************** 157 Probe and attachment routines. 158 *****************************************************************************/ 159 static int 160 i2s_probe(device_t self) 161 { 162 const char *name; 163 phandle_t subchild; 164 char subchildname[255]; 165 166 name = ofw_bus_get_name(self); 167 if (!name) 168 return (ENXIO); 169 170 if (strcmp(name, "i2s") != 0) 171 return (ENXIO); 172 173 /* 174 * Do not attach to "lightshow" I2S devices on Xserves. This controller 175 * is used there to control the LEDs on the front panel, and this 176 * driver can't handle it. 177 */ 178 subchild = OF_child(OF_child(ofw_bus_get_node(self))); 179 if (subchild != 0 && OF_getprop(subchild, "name", subchildname, 180 sizeof(subchildname)) > 0 && strcmp(subchildname, "lightshow") == 0) 181 return (ENXIO); 182 183 device_set_desc(self, "Apple I2S Audio Controller"); 184 185 return (0); 186 } 187 188 static phandle_t of_find_firstchild_byname(phandle_t, const char *); 189 190 static int 191 i2s_attach(device_t self) 192 { 193 struct i2s_softc *sc; 194 struct resource *dbdma_irq; 195 void *dbdma_ih; 196 int rid, oirq, err; 197 phandle_t port; 198 199 sc = malloc(sizeof(*sc), M_DEVBUF, M_WAITOK | M_ZERO); 200 201 sc->aoa.sc_dev = self; 202 sc->node = ofw_bus_get_node(self); 203 204 port = of_find_firstchild_byname(sc->node, "i2s-a"); 205 if (port == -1) 206 return (ENXIO); 207 sc->soundnode = of_find_firstchild_byname(port, "sound"); 208 if (sc->soundnode == -1) 209 return (ENXIO); 210 211 mtx_init(&sc->port_mtx, "port_mtx", NULL, MTX_DEF); 212 213 /* Map the controller register space. */ 214 rid = 0; 215 sc->reg = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE); 216 if (sc->reg == NULL) 217 return ENXIO; 218 219 /* Map the DBDMA channel register space. */ 220 rid = 1; 221 sc->aoa.sc_odma = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 222 RF_ACTIVE); 223 if (sc->aoa.sc_odma == NULL) 224 return ENXIO; 225 226 /* Establish the DBDMA channel edge-triggered interrupt. */ 227 rid = 1; 228 dbdma_irq = bus_alloc_resource_any(self, SYS_RES_IRQ, 229 &rid, RF_SHAREABLE | RF_ACTIVE); 230 if (dbdma_irq == NULL) 231 return (ENXIO); 232 233 /* Now initialize the controller. */ 234 err = i2s_setup(sc, 44100, 16, 64); 235 if (err != 0) 236 return (err); 237 238 snd_setup_intr(self, dbdma_irq, INTR_MPSAFE, aoa_interrupt, 239 sc, &dbdma_ih); 240 241 oirq = rman_get_start(dbdma_irq); 242 err = powerpc_config_intr(oirq, INTR_TRIGGER_EDGE, INTR_POLARITY_LOW); 243 if (err != 0) 244 return (err); 245 246 /* 247 * Register a hook for delayed attach in order to allow 248 * the I2C controller to attach. 249 */ 250 if ((i2s_delayed_attach = malloc(sizeof(struct intr_config_hook), 251 M_TEMP, M_WAITOK | M_ZERO)) == NULL) 252 return (ENOMEM); 253 254 i2s_delayed_attach->ich_func = i2s_postattach; 255 i2s_delayed_attach->ich_arg = sc; 256 257 if (config_intrhook_establish(i2s_delayed_attach) != 0) 258 return (ENOMEM); 259 260 return (aoa_attach(sc)); 261 } 262 263 /***************************************************************************** 264 GPIO routines. 265 *****************************************************************************/ 266 267 enum gpio_ctrl { 268 AMP_MUTE, 269 HEADPHONE_MUTE, 270 LINEOUT_MUTE, 271 AUDIO_HW_RESET, 272 HEADPHONE_DETECT, 273 LINEOUT_DETECT, 274 GPIO_CTRL_NUM 275 }; 276 277 #define GPIO_CTRL_EXTINT_SET \ 278 ((1 << HEADPHONE_DETECT) | \ 279 (1 << LINEOUT_DETECT)) 280 281 static struct aoagpio_softc *gpio_ctrls[GPIO_CTRL_NUM] = 282 {NULL, NULL, NULL, NULL, NULL, NULL}; 283 284 static struct gpio_match { 285 const char *name; 286 enum gpio_ctrl ctrl; 287 } gpio_controls[] = { 288 {"headphone-mute", HEADPHONE_MUTE}, 289 {"lineout-mute", LINEOUT_MUTE}, 290 {"amp-mute", AMP_MUTE}, 291 {"headphone-detect", HEADPHONE_DETECT}, 292 {"lineout-detect", LINEOUT_DETECT}, 293 {"line-output-detect", LINEOUT_DETECT}, 294 {"audio-hw-reset", AUDIO_HW_RESET}, 295 {"hw-reset", AUDIO_HW_RESET}, 296 {NULL, GPIO_CTRL_NUM} 297 }; 298 299 static void i2s_cint(struct i2s_softc *); 300 301 static void 302 aoagpio_int(void *cookie) 303 { 304 device_t self = cookie; 305 struct aoagpio_softc *sc; 306 307 sc = device_get_softc(self); 308 309 if (macgpio_read(self) & GPIO_LEVEL_RO) 310 sc->level = sc->detect_active; 311 else 312 sc->level = !(sc->detect_active); 313 314 if (sc->i2s) 315 i2s_cint(sc->i2s); 316 } 317 318 static int 319 aoagpio_probe(device_t gpio) 320 { 321 phandle_t node; 322 char bname[32]; 323 const char *name; 324 struct gpio_match *m; 325 struct aoagpio_softc *sc; 326 327 node = ofw_bus_get_node(gpio); 328 if (node == 0 || node == -1) 329 return (EINVAL); 330 331 bzero(bname, sizeof(bname)); 332 if (OF_getprop(node, "audio-gpio", bname, sizeof(bname)) > 2) 333 name = bname; 334 else 335 name = ofw_bus_get_name(gpio); 336 337 /* Try to find a match. */ 338 for (m = gpio_controls; m->name != NULL; m++) { 339 if (strcmp(name, m->name) == 0) { 340 sc = device_get_softc(gpio); 341 gpio_ctrls[m->ctrl] = sc; 342 sc->dev = gpio; 343 sc->ctrl = m->ctrl; 344 sc->level = 0; 345 sc->detect_active = 0; 346 sc->i2s = NULL; 347 348 OF_getprop(node, "audio-gpio-active-state", 349 &sc->detect_active, sizeof(sc->detect_active)); 350 351 if ((1 << m->ctrl) & GPIO_CTRL_EXTINT_SET) 352 aoagpio_int(gpio); 353 354 device_set_desc(gpio, m->name); 355 device_quiet(gpio); 356 return (0); 357 } 358 } 359 360 return (ENXIO); 361 } 362 363 static int 364 aoagpio_attach(device_t gpio) 365 { 366 struct aoagpio_softc *sc; 367 struct resource *r; 368 void *cookie; 369 int irq, rid = 0; 370 371 sc = device_get_softc(gpio); 372 373 if ((1 << sc->ctrl) & GPIO_CTRL_EXTINT_SET) { 374 r = bus_alloc_resource_any(gpio, SYS_RES_IRQ, &rid, RF_ACTIVE); 375 if (r == NULL) 376 return (ENXIO); 377 378 irq = rman_get_start(r); 379 DPRINTF(("interrupting at irq %d\n", irq)); 380 381 if (powerpc_config_intr(irq, INTR_TRIGGER_EDGE, 382 INTR_POLARITY_LOW) != 0) 383 return (ENXIO); 384 385 bus_setup_intr(gpio, r, INTR_TYPE_MISC | INTR_MPSAFE | 386 INTR_ENTROPY, NULL, aoagpio_int, gpio, &cookie); 387 } 388 389 return (0); 390 } 391 392 /* 393 * I2S module registers 394 */ 395 #define I2S_INT 0x00 396 #define I2S_FORMAT 0x10 397 #define I2S_FRAMECOUNT 0x40 398 #define I2S_FRAMEMATCH 0x50 399 #define I2S_WORDSIZE 0x60 400 401 /* I2S_INT register definitions */ 402 #define I2S_INT_CLKSTOPPEND 0x01000000 /* clock-stop interrupt pending */ 403 404 /* I2S_FORMAT register definitions */ 405 #define CLKSRC_49MHz 0x80000000 /* Use 49152000Hz Osc. */ 406 #define CLKSRC_45MHz 0x40000000 /* Use 45158400Hz Osc. */ 407 #define CLKSRC_18MHz 0x00000000 /* Use 18432000Hz Osc. */ 408 #define MCLK_DIV_MASK 0x1f000000 /* MCLK = SRC / DIV */ 409 #define SCLK_DIV_MASK 0x00f00000 /* SCLK = MCLK / DIV */ 410 #define SCLK_MASTER 0x00080000 /* Master mode */ 411 #define SCLK_SLAVE 0x00000000 /* Slave mode */ 412 #define SERIAL_FORMAT 0x00070000 413 #define SERIAL_SONY 0x00000000 414 #define SERIAL_64x 0x00010000 415 #define SERIAL_32x 0x00020000 416 #define SERIAL_DAV 0x00040000 417 #define SERIAL_SILICON 0x00050000 418 419 /* I2S_WORDSIZE register definitions */ 420 #define INPUT_STEREO (2 << 24) 421 #define INPUT_MONO (1 << 24) 422 #define INPUT_16BIT (0 << 16) 423 #define INPUT_24BIT (3 << 16) 424 #define OUTPUT_STEREO (2 << 8) 425 #define OUTPUT_MONO (1 << 8) 426 #define OUTPUT_16BIT (0 << 0) 427 #define OUTPUT_24BIT (3 << 0) 428 429 /* Master clock, needed by some codecs. We hardcode this 430 to 256 * fs as this is valid for most codecs. */ 431 #define MCLK_FS 256 432 433 /* Number of clock sources we can use. */ 434 #define NCLKS 3 435 static const struct i2s_clksrc { 436 u_int cs_clock; 437 u_int cs_reg; 438 } clksrc[NCLKS] = { 439 {49152000, CLKSRC_49MHz}, 440 {45158400, CLKSRC_45MHz}, 441 {18432000, CLKSRC_18MHz} 442 }; 443 444 /* Configure the I2S controller for the required settings. 445 'rate' is the frame rate. 446 'wordsize' is the sample size (usually 16 bits). 447 'sclk_fs' is the SCLK/framerate ratio, which needs to be equal 448 or greater to the number of bits per frame. */ 449 450 static int 451 i2s_setup(struct i2s_softc *sc, u_int rate, u_int wordsize, u_int sclk_fs) 452 { 453 u_int mclk, mdiv, sdiv; 454 u_int reg = 0, x, wordformat; 455 u_int i; 456 457 /* Make sure the settings are consistent... */ 458 if ((wordsize * 2) > sclk_fs) 459 return (EINVAL); 460 461 if (sclk_fs != 32 && sclk_fs != 64) 462 return (EINVAL); 463 464 /* 465 * Find a clock source to derive the master clock (MCLK) 466 * and the I2S bit block (SCLK) and set the divisors as 467 * appropriate. 468 */ 469 mclk = rate * MCLK_FS; 470 sdiv = MCLK_FS / sclk_fs; 471 472 for (i = 0; i < NCLKS; ++i) { 473 if ((clksrc[i].cs_clock % mclk) == 0) { 474 reg = clksrc[i].cs_reg; 475 mdiv = clksrc[i].cs_clock / mclk; 476 break; 477 } 478 } 479 if (reg == 0) 480 return (EINVAL); 481 482 switch (mdiv) { 483 /* exception cases */ 484 case 1: 485 x = 14; 486 break; 487 case 3: 488 x = 13; 489 break; 490 case 5: 491 x = 12; 492 break; 493 default: 494 x = (mdiv / 2) - 1; 495 break; 496 } 497 reg |= (x << 24) & MCLK_DIV_MASK; 498 499 switch (sdiv) { 500 case 1: 501 x = 8; 502 break; 503 case 3: 504 x = 9; 505 break; 506 default: 507 x = (sdiv / 2) - 1; 508 break; 509 } 510 reg |= (x << 20) & SCLK_DIV_MASK; 511 512 /* 513 * XXX use master mode for now. This needs to be 514 * revisited if we want to add recording from SPDIF some day. 515 */ 516 reg |= SCLK_MASTER; 517 518 switch (sclk_fs) { 519 case 64: 520 reg |= SERIAL_64x; 521 break; 522 case 32: 523 reg |= SERIAL_32x; 524 break; 525 } 526 527 /* stereo input and output */ 528 wordformat = INPUT_STEREO | OUTPUT_STEREO; 529 530 switch (wordsize) { 531 case 16: 532 wordformat |= INPUT_16BIT | OUTPUT_16BIT; 533 break; 534 case 24: 535 wordformat |= INPUT_24BIT | OUTPUT_24BIT; 536 break; 537 default: 538 return (EINVAL); 539 } 540 541 x = bus_read_4(sc->reg, I2S_WORDSIZE); 542 if (x != wordformat) 543 bus_write_4(sc->reg, I2S_WORDSIZE, wordformat); 544 545 x = bus_read_4(sc->reg, I2S_FORMAT); 546 if (x != reg) { 547 /* 548 * XXX to change the format we need to stop the clock 549 * via the FCR registers. For now, rely on the firmware 550 * to set sane defaults (44100). 551 */ 552 printf("i2s_setup: changing format not supported yet.\n"); 553 return (ENOTSUP); 554 555 #ifdef notyet 556 if (obio_fcr_isset(OBIO_FCR1, I2S0CLKEN)) { 557 558 bus_space_write_4(sc->sc_tag, sc->sc_bsh, I2S_INT, 559 I2S_INT_CLKSTOPPEND); 560 561 obio_fcr_clear(OBIO_FCR1, I2S0CLKEN); 562 563 for (timo = 1000; timo > 0; timo--) { 564 if (bus_space_read_4(sc->sc_tag, sc->sc_bsh, 565 I2S_INT) & I2S_INT_CLKSTOPPEND) 566 break; 567 568 DELAY(10); 569 } 570 571 if (timo == 0) 572 printf("%s: timeout waiting for clock to stop\n", 573 sc->sc_dev.dv_xname); 574 } 575 576 bus_space_write_4(sc->sc_tag, sc->sc_bsh, I2S_FORMAT, reg); 577 578 obio_fcr_set(OBIO_FCR1, I2S0CLKEN); 579 #endif 580 } 581 582 return (0); 583 } 584 585 586 /* XXX this does not belong here. */ 587 static phandle_t 588 of_find_firstchild_byname(phandle_t node, const char *req_name) 589 { 590 char name[32]; /* max name len per OF spec. */ 591 phandle_t n; 592 593 for (n = OF_child(node); n != -1; n = OF_peer(n)) { 594 bzero(name, sizeof(name)); 595 OF_getprop(n, "name", name, sizeof(name)); 596 597 if (strcmp(name, req_name) == 0) 598 return (n); 599 } 600 601 return (-1); 602 } 603 604 605 static u_int 606 gpio_read(enum gpio_ctrl ctrl) 607 { 608 struct aoagpio_softc *sc; 609 610 if ((sc = gpio_ctrls[ctrl]) == NULL) 611 return (0); 612 613 return (macgpio_read(sc->dev) & GPIO_DATA); 614 } 615 616 static void 617 gpio_write(enum gpio_ctrl ctrl, u_int x) 618 { 619 struct aoagpio_softc *sc; 620 u_int reg; 621 622 if ((sc = gpio_ctrls[ctrl]) == NULL) 623 return; 624 625 reg = GPIO_DDR_OUTPUT; 626 if (x) 627 reg |= GPIO_DATA; 628 629 macgpio_write(sc->dev, reg); 630 } 631 632 static void 633 i2s_cint(struct i2s_softc *sc) 634 { 635 u_int mask = 0; 636 637 if (gpio_ctrls[HEADPHONE_DETECT] && 638 gpio_ctrls[HEADPHONE_DETECT]->level) 639 mask |= 1 << 1; 640 641 if (gpio_ctrls[LINEOUT_DETECT] && 642 gpio_ctrls[LINEOUT_DETECT]->level) 643 mask |= 1 << 2; 644 645 if (mask == 0) 646 mask = 1 << 0; /* fall back to speakers. */ 647 648 i2s_set_outputs(sc, mask); 649 } 650 651 #define reset_active 0 652 653 /* these values are in microseconds */ 654 #define RESET_SETUP_TIME 5000 655 #define RESET_HOLD_TIME 20000 656 #define RESET_RELEASE_TIME 10000 657 658 static void 659 i2s_audio_hw_reset(struct i2s_softc *sc) 660 { 661 if (gpio_ctrls[AUDIO_HW_RESET]) { 662 DPRINTF(("resetting codec\n")); 663 664 gpio_write(AUDIO_HW_RESET, !reset_active); /* Negate RESET */ 665 DELAY(RESET_SETUP_TIME); 666 667 gpio_write(AUDIO_HW_RESET, reset_active); /* Assert RESET */ 668 DELAY(RESET_HOLD_TIME); 669 670 gpio_write(AUDIO_HW_RESET, !reset_active); /* Negate RESET */ 671 DELAY(RESET_RELEASE_TIME); 672 673 } else { 674 DPRINTF(("no audio_hw_reset\n")); 675 } 676 } 677 678 #define AMP_ACTIVE 0 /* XXX OF */ 679 #define HEADPHONE_ACTIVE 0 /* XXX OF */ 680 #define LINEOUT_ACTIVE 0 /* XXX OF */ 681 682 #define MUTE_CONTROL(xxx, yyy) \ 683 static void \ 684 i2s_mute_##xxx(struct i2s_softc *sc, int mute) \ 685 { \ 686 int x; \ 687 \ 688 if (gpio_ctrls[yyy##_MUTE] == NULL) \ 689 return; \ 690 if (mute) \ 691 x = yyy##_ACTIVE; \ 692 else \ 693 x = ! yyy##_ACTIVE; \ 694 \ 695 if (x != gpio_read(yyy##_MUTE)) \ 696 gpio_write(yyy##_MUTE, x); \ 697 } 698 699 MUTE_CONTROL(speaker, AMP) 700 MUTE_CONTROL(headphone, HEADPHONE) 701 MUTE_CONTROL(lineout, LINEOUT) 702 703 static void 704 i2s_set_outputs(void *ptr, u_int mask) 705 { 706 struct i2s_softc *sc = ptr; 707 708 if (mask == sc->output_mask) 709 return; 710 711 mtx_lock(&sc->port_mtx); 712 713 i2s_mute_speaker(sc, 1); 714 i2s_mute_headphone(sc, 1); 715 i2s_mute_lineout(sc, 1); 716 717 DPRINTF(("enabled outputs: ")); 718 719 if (mask & (1 << 0)) { 720 DPRINTF(("SPEAKER ")); 721 i2s_mute_speaker(sc, 0); 722 } 723 if (mask & (1 << 1)) { 724 DPRINTF(("HEADPHONE ")); 725 i2s_mute_headphone(sc, 0); 726 } 727 if (mask & (1 << 2)) { 728 DPRINTF(("LINEOUT ")); 729 i2s_mute_lineout(sc, 0); 730 } 731 732 DPRINTF(("\n")); 733 sc->output_mask = mask; 734 735 mtx_unlock(&sc->port_mtx); 736 } 737 738 static void 739 i2s_postattach(void *xsc) 740 { 741 struct i2s_softc *sc = xsc; 742 device_t self; 743 int i; 744 745 self = sc->aoa.sc_dev; 746 747 /* Reset the codec. */ 748 i2s_audio_hw_reset(sc); 749 750 /* If we have a codec, initialize it. */ 751 if (i2s_mixer) 752 mixer_init(self, i2s_mixer_class, i2s_mixer); 753 754 /* Read initial port status. */ 755 i2s_cint(sc); 756 757 /* Enable GPIO interrupt callback. */ 758 for (i = 0; i < GPIO_CTRL_NUM; i++) 759 if (gpio_ctrls[i]) 760 gpio_ctrls[i]->i2s = sc; 761 762 config_intrhook_disestablish(i2s_delayed_attach); 763 free(i2s_delayed_attach, M_TEMP); 764 } 765 766