1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1997,1998 Luigi Rizzo 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #ifndef SB_H 30 #define SB_H 31 32 struct sbc_softc; 33 void sbc_lock(struct sbc_softc *); 34 void sbc_lockassert(struct sbc_softc *); 35 void sbc_unlock(struct sbc_softc *); 36 37 /* 38 * sound blaster registers 39 */ 40 41 #define SBDSP_RST 0x6 42 #define DSP_READ 0xA 43 #define DSP_WRITE 0xC 44 #define SBDSP_CMD 0xC 45 #define SBDSP_STATUS 0xC 46 #define DSP_DATA_AVAIL 0xE 47 #define DSP_DATA_AVL16 0xF 48 49 #define SB_MIX_ADDR 0x4 50 #define SB_MIX_DATA 0x5 51 #if 0 52 #define OPL3_LEFT (io_base + 0x0) 53 #define OPL3_RIGHT (io_base + 0x2) 54 #define OPL3_BOTH (io_base + 0x8) 55 #endif 56 57 /* 58 * DSP Commands. There are many, and in many cases they are used explicitly 59 */ 60 61 /* these are not used except for programmed I/O (not in this driver) */ 62 #define DSP_DAC8 0x10 /* direct DAC output */ 63 #define DSP_ADC8 0x20 /* direct ADC input */ 64 65 /* these should be used in the SB 1.0 */ 66 #define DSP_CMD_DAC8 0x14 /* single cycle 8-bit dma out */ 67 #define DSP_CMD_ADC8 0x24 /* single cycle 8-bit dma in */ 68 69 /* these should be used in the SB 2.0 and 2.01 */ 70 #define DSP_CMD_DAC8_AUTO 0x1c /* auto 8-bit dma out */ 71 #define DSP_CMD_ADC8_AUTO 0x2c /* auto 8-bit dma out */ 72 73 #define DSP_CMD_HSSIZE 0x48 /* high speed dma count */ 74 #define DSP_CMD_HSDAC_AUTO 0x90 /* high speed dac, auto */ 75 #define DSP_CMD_HSADC_AUTO 0x98 /* high speed adc, auto */ 76 77 /* SBPro commands. Some cards (JAZZ, SMW) also support 16 bits */ 78 79 /* prepare for dma input */ 80 #define DSP_CMD_DMAMODE(stereo, bit16) (0xA0 | (stereo ? 8:0) | (bit16 ? 4:0)) 81 82 #define DSP_CMD_DAC2 0x16 /* 2-bit adpcm dma out (cont) */ 83 #define DSP_CMD_DAC2S 0x17 /* 2-bit adpcm dma out (start) */ 84 85 #define DSP_CMD_DAC2S_AUTO 0x1f /* auto 2-bit adpcm dma out (start) */ 86 87 /* SB16 commands */ 88 #define DSP_CMD_O16 0xb0 89 #define DSP_CMD_I16 0xb8 90 #define DSP_CMD_O8 0xc0 91 #define DSP_CMD_I8 0xc8 92 93 #define DSP_MODE_U8MONO 0x00 94 #define DSP_MODE_U8STEREO 0x20 95 #define DSP_MODE_S16MONO 0x10 96 #define DSP_MODE_S16STEREO 0x30 97 98 #define DSP_CMD_SPKON 0xD1 99 #define DSP_CMD_SPKOFF 0xD3 100 #define DSP_CMD_SPKR(on) (0xD1 | (on ? 0:2)) 101 102 #define DSP_CMD_DMAPAUSE_8 0xD0 103 #define DSP_CMD_DMAPAUSE_16 0xD5 104 #define DSP_CMD_DMAEXIT_8 0xDA 105 #define DSP_CMD_DMAEXIT_16 0xD9 106 #define DSP_CMD_TCONST 0x40 /* set time constant */ 107 #define DSP_CMD_HSDAC 0x91 /* high speed dac */ 108 #define DSP_CMD_HSADC 0x99 /* high speed adc */ 109 110 #define DSP_CMD_GETVER 0xE1 111 #define DSP_CMD_GETID 0xE7 /* return id bytes */ 112 113 #define DSP_CMD_OUT16 0x41 /* send parms for dma out on sb16 */ 114 #define DSP_CMD_IN16 0x42 /* send parms for dma in on sb16 */ 115 #if 0 /*** unknown ***/ 116 #define DSP_CMD_FA 0xFA /* get version from prosonic*/ 117 #define DSP_CMD_FB 0xFB /* set irq/dma for prosonic*/ 118 #endif 119 120 /* 121 * in fact, for the SB16, dma commands are as follows: 122 * 123 * cmd, mode, len_low, len_high. 124 * 125 * cmd is a combination of DSP_DMA16 or DSP_DMA8 and 126 */ 127 128 #define DSP_DMA16 0xb0 129 #define DSP_DMA8 0xc0 130 # define DSP_F16_DAC 0x00 131 # define DSP_F16_ADC 0x08 132 # define DSP_F16_AUTO 0x04 133 # define DSP_F16_FIFO_ON 0x02 134 135 /* 136 * mode is a combination of the following: 137 */ 138 #define DSP_F16_STEREO 0x20 139 #define DSP_F16_SIGNED 0x10 140 141 #define IMODE_NONE 0 142 #define IMODE_OUTPUT PCM_ENABLE_OUTPUT 143 #define IMODE_INPUT PCM_ENABLE_INPUT 144 #define IMODE_INIT 3 145 #define IMODE_MIDI 4 146 147 #define NORMAL_MIDI 0 148 #define UART_MIDI 1 149 150 /* 151 * values used for bd_flags in SoundBlaster driver 152 */ 153 #define BD_F_HISPEED 0x0001 /* doing high speed ... */ 154 155 #if 0 156 #define BD_F_JAZZ16 0x0002 /* jazz16 detected */ 157 #define BD_F_JAZZ16_2 0x0004 /* jazz16 type 2 */ 158 #endif 159 160 #define BD_F_DUP_MIDI 0x0008 /* duplex midi */ 161 162 #define BD_F_MIX_MASK 0x0070 /* up to 8 mixers (I know of 3) */ 163 #define BD_F_MIX_CT1335 0x0010 /* CT1335 */ 164 #define BD_F_MIX_CT1345 0x0020 /* CT1345 */ 165 #define BD_F_MIX_CT1745 0x0030 /* CT1745 */ 166 167 #define BD_F_SB16 0x0100 /* this is a SB16 */ 168 #define BD_F_SB16X 0x0200 /* this is a vibra16X or clone */ 169 #if 0 170 #define BD_F_MIDIBUSY 0x0400 /* midi busy */ 171 #endif 172 #define BD_F_ESS 0x0800 /* this is an ESS chip */ 173 #define BD_F_DMARUN 0x2000 174 #define BD_F_DMARUN2 0x4000 175 176 /* 177 * Mixer registers of SB Pro 178 */ 179 #define VOC_VOL 0x04 180 #define MIC_VOL 0x0A 181 #define MIC_MIX 0x0A 182 #define RECORD_SRC 0x0C 183 #define IN_FILTER 0x0C 184 #define OUT_FILTER 0x0E 185 #define MASTER_VOL 0x22 186 #define FM_VOL 0x26 187 #define CD_VOL 0x28 188 #define LINE_VOL 0x2E 189 #define IRQ_NR 0x80 190 #define DMA_NR 0x81 191 #define IRQ_STAT 0x82 192 193 /* 194 * Additional registers on the SG NX Pro 195 */ 196 #define COVOX_VOL 0x42 197 #define TREBLE_LVL 0x44 198 #define BASS_LVL 0x46 199 200 #define FREQ_HI (1 << 3)/* Use High-frequency ANFI filters */ 201 #define FREQ_LOW 0 /* Use Low-frequency ANFI filters */ 202 #define FILT_ON 0 /* Yes, 0 to turn it on, 1 for off */ 203 #define FILT_OFF (1 << 5) 204 205 #define MONO_DAC 0x00 206 #define STEREO_DAC 0x02 207 208 /* 209 * Mixer registers of SB16 210 */ 211 #define SB16_IMASK_L 0x3d 212 #define SB16_IMASK_R 0x3e 213 #define SB16_OMASK 0x3c 214 #endif 215