1 /*- 2 * Copyright (c) 1998 Nicolas Souchu 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 #ifndef __SMBONF_H 29 #define __SMBONF_H 30 31 #include <sys/queue.h> 32 33 #define SMBPRI (PZERO+8) /* XXX sleep/wakeup queue priority */ 34 35 #define n(flags) (~(flags) & (flags)) 36 37 /* 38 * How tsleep() is called in smb_request_bus(). 39 */ 40 #define SMB_DONTWAIT 0 41 #define SMB_NOINTR 0 42 #define SMB_WAIT 0x1 43 #define SMB_INTR 0x2 44 45 /* 46 * callback index 47 */ 48 #define SMB_REQUEST_BUS 0x1 49 #define SMB_RELEASE_BUS 0x2 50 51 /* 52 * SMB bus errors 53 */ 54 #define SMB_ENOERR 0x0 55 #define SMB_EBUSERR 0x1 56 #define SMB_ENOTSUPP 0x2 57 #define SMB_ENOACK 0x4 58 #define SMB_ECOLLI 0x8 59 #define SMB_EABORT 0x10 60 #define SMB_ETIMEOUT 0x20 61 #define SMB_EBUSY 0x40 62 #define SMB_EINVAL 0x100 63 64 /* 65 * How Quick command is executed 66 */ 67 #define SMB_QWRITE 0x0 68 #define SMB_QREAD 0x1 69 70 /* 71 * smbus transction op with pass-thru capabilities 72 * 73 * This smbus function is capable of doing a smbus command transaction 74 * (read or write), and can be flagged to not issue the 'cmd' and/or 75 * issue or expect a count field as well as flagged for chaining (no STOP), 76 * which gives it an i2c pass-through capability. 77 * 78 * NOSTOP- Caller chaining transactions, do not issue STOP 79 * NOCMD- Do not transmit the command field 80 * NOCNT- Do not transmit (wr) or expect (rd) the count field 81 */ 82 #define SMB_TRANS_NOSTOP 0x0001 /* do not send STOP at end */ 83 #define SMB_TRANS_NOCMD 0x0002 /* ignore cmd field (do not tx) */ 84 #define SMB_TRANS_NOCNT 0x0004 /* do not tx or rx count field */ 85 #define SMB_TRANS_7BIT 0x0008 /* change address mode to 7-bit */ 86 #define SMB_TRANS_10BIT 0x0010 /* change address mode to 10-bit */ 87 #define SMB_TRANS_NOREPORT 0x0020 /* do not report errors */ 88 89 /* 90 * ivars codes 91 */ 92 enum smbus_ivars { 93 SMBUS_IVAR_ADDR, /* slave address of the device */ 94 }; 95 96 int smbus_request_bus(device_t, device_t, int); 97 int smbus_release_bus(device_t, device_t); 98 device_t smbus_alloc_bus(device_t); 99 int smbus_error(int error); 100 101 void smbus_intr(device_t, u_char, char low, char high, int error); 102 103 #define SMBUS_ACCESSOR(var, ivar, type) \ 104 __BUS_ACCESSOR(smbus, var, SMBUS, ivar, type) 105 106 SMBUS_ACCESSOR(addr, ADDR, int) 107 108 #undef SMBUS_ACCESSOR 109 110 extern driver_t smbus_driver; 111 extern devclass_t smbus_devclass; 112 113 #define smbus_quick(bus,slave,how) \ 114 (SMBUS_QUICK(device_get_parent(bus), slave, how)) 115 #define smbus_sendb(bus,slave,byte) \ 116 (SMBUS_SENDB(device_get_parent(bus), slave, byte)) 117 #define smbus_recvb(bus,slave,byte) \ 118 (SMBUS_RECVB(device_get_parent(bus), slave, byte)) 119 #define smbus_writeb(bus,slave,cmd,byte) \ 120 (SMBUS_WRITEB(device_get_parent(bus), slave, cmd, byte)) 121 #define smbus_writew(bus,slave,cmd,word) \ 122 (SMBUS_WRITEW(device_get_parent(bus), slave, cmd, word)) 123 #define smbus_readb(bus,slave,cmd,byte) \ 124 (SMBUS_READB(device_get_parent(bus), slave, cmd, byte)) 125 #define smbus_readw(bus,slave,cmd,word) \ 126 (SMBUS_READW(device_get_parent(bus), slave, cmd, word)) 127 #define smbus_pcall(bus,slave,cmd,sdata,rdata) \ 128 (SMBUS_PCALL(device_get_parent(bus), slave, cmd, sdata, rdata)) 129 #define smbus_bwrite(bus,slave,cmd,count,buf) \ 130 (SMBUS_BWRITE(device_get_parent(bus), slave, cmd, count, buf)) 131 #define smbus_bread(bus,slave,cmd,count,buf) \ 132 (SMBUS_BREAD(device_get_parent(bus), slave, cmd, count, buf)) 133 #define smbus_trans(bus,slave,cmd,op,wbuf,wcount,rbuf,rcount,actualp) \ 134 (SMBUS_TRANS(device_get_parent(bus), slave, cmd, op, \ 135 wbuf, wcount, rbuf, rcount, actualp)) 136 137 #define SMBUS_MODVER 1 138 #define SMBUS_MINVER 1 139 #define SMBUS_MAXVER 1 140 #define SMBUS_PREFVER SMBUS_MODVER 141 142 #endif 143