1 /* $OpenBSD: if_skreg.h,v 1.10 2003/08/12 05:23:06 nate Exp $ */ 2 3 /*- 4 * Copyright (c) 1997, 1998, 1999, 2000 5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD$ 35 */ 36 37 /*- 38 * Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu> 39 * 40 * Permission to use, copy, modify, and distribute this software for any 41 * purpose with or without fee is hereby granted, provided that the above 42 * copyright notice and this permission notice appear in all copies. 43 * 44 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 45 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 46 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 47 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 48 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 49 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 50 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 51 */ 52 53 /* Values to keep the different chip revisions apart (SK_CHIPVER). */ 54 #define SK_GENESIS 0x0A 55 #define SK_YUKON 0xB0 56 #define SK_YUKON_LITE 0xB1 57 #define SK_YUKON_LP 0xB2 58 #define SK_YUKON_FAMILY(x) ((x) & 0xB0) 59 60 /* Known revisions in SK_CONFIG. */ 61 #define SK_YUKON_LITE_REV_A0 0x0 /* invented, see test in skc_attach. */ 62 #define SK_YUKON_LITE_REV_A1 0x3 63 #define SK_YUKON_LITE_REV_A3 0x7 64 65 /* 66 * SysKonnect PCI vendor ID 67 */ 68 #define VENDORID_SK 0x1148 69 70 /* 71 * Marvell PCI vendor ID 72 */ 73 #define VENDORID_MARVELL 0x11AB 74 75 /* 76 * SK-NET gigabit ethernet device IDs 77 */ 78 #define DEVICEID_SK_V1 0x4300 79 #define DEVICEID_SK_V2 0x4320 80 81 /* 82 * Belkin F5D5005 83 */ 84 #define DEVICEID_BELKIN_5005 0x5005 85 86 /* 87 * 3Com PCI vendor ID 88 */ 89 #define VENDORID_3COM 0x10b7 90 91 /* 92 * 3Com gigabit ethernet device ID 93 */ 94 #define DEVICEID_3COM_3C940 0x1700 95 96 /* 97 * Linksys PCI vendor ID 98 */ 99 #define VENDORID_LINKSYS 0x1737 100 101 /* 102 * Linksys gigabit ethernet device ID 103 */ 104 #define DEVICEID_LINKSYS_EG1032 0x1032 105 106 /* 107 * Linksys gigabit ethernet rev 2 sub-device ID 108 */ 109 #define SUBDEVICEID_LINKSYS_EG1032_REV2 0x0015 110 111 /* 112 * D-Link PCI vendor ID 113 */ 114 #define VENDORID_DLINK 0x1186 115 116 /* 117 * D-Link gigabit ethernet device ID 118 */ 119 #define DEVICEID_DLINK_DGE530T_A1 0x4c00 120 #define DEVICEID_DLINK_DGE530T_B1 0x4b01 121 122 /* 123 * GEnesis registers. The GEnesis chip has a 256-byte I/O window 124 * but internally it has a 16K register space. This 16K space is 125 * divided into 128-byte blocks. The first 128 bytes of the I/O 126 * window represent the first block, which is permanently mapped 127 * at the start of the window. The other 127 blocks can be mapped 128 * to the second 128 bytes of the I/O window by setting the desired 129 * block value in the RAP register in block 0. Not all of the 127 130 * blocks are actually used. Most registers are 32 bits wide, but 131 * there are a few 16-bit and 8-bit ones as well. 132 */ 133 134 135 /* Start of remappable register window. */ 136 #define SK_WIN_BASE 0x0080 137 138 /* Size of a window */ 139 #define SK_WIN_LEN 0x80 140 141 #define SK_WIN_MASK 0x3F80 142 #define SK_REG_MASK 0x7F 143 144 /* Compute the window of a given register (for the RAP register) */ 145 #define SK_WIN(reg) (((reg) & SK_WIN_MASK) / SK_WIN_LEN) 146 147 /* Compute the relative offset of a register within the window */ 148 #define SK_REG(reg) ((reg) & SK_REG_MASK) 149 150 #define SK_PORT_A 0 151 #define SK_PORT_B 1 152 153 /* 154 * Compute offset of port-specific register. Since there are two 155 * ports, there are two of some GEnesis modules (e.g. two sets of 156 * DMA queues, two sets of FIFO control registers, etc...). Normally, 157 * the block for port 0 is at offset 0x0 and the block for port 1 is 158 * at offset 0x80 (i.e. the next page over). However for the transmit 159 * BMUs and RAMbuffers, there are two blocks for each port: one for 160 * the sync transmit queue and one for the async queue (which we don't 161 * use). However instead of ordering them like this: 162 * TX sync 1 / TX sync 2 / TX async 1 / TX async 2 163 * SysKonnect has instead ordered them like this: 164 * TX sync 1 / TX async 1 / TX sync 2 / TX async 2 165 * This means that when referencing the TX BMU and RAMbuffer registers, 166 * we have to double the block offset (0x80 * 2) in order to reach the 167 * second queue. This prevents us from using the same formula 168 * (sk_port * 0x80) to compute the offsets for all of the port-specific 169 * blocks: we need an extra offset for the BMU and RAMbuffer registers. 170 * The simplest thing is to provide an extra argument to these macros: 171 * the 'skip' parameter. The 'skip' value is the number of extra pages 172 * for skip when computing the port0/port1 offsets. For most registers, 173 * the skip value is 0; for the BMU and RAMbuffer registers, it's 1. 174 */ 175 #define SK_IF_READ_4(sc_if, skip, reg) \ 176 sk_win_read_4(sc_if->sk_softc, reg + \ 177 ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN)) 178 #define SK_IF_READ_2(sc_if, skip, reg) \ 179 sk_win_read_2(sc_if->sk_softc, reg + \ 180 ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN)) 181 #define SK_IF_READ_1(sc_if, skip, reg) \ 182 sk_win_read_1(sc_if->sk_softc, reg + \ 183 ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN)) 184 185 #define SK_IF_WRITE_4(sc_if, skip, reg, val) \ 186 sk_win_write_4(sc_if->sk_softc, \ 187 reg + ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN), val) 188 #define SK_IF_WRITE_2(sc_if, skip, reg, val) \ 189 sk_win_write_2(sc_if->sk_softc, \ 190 reg + ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN), val) 191 #define SK_IF_WRITE_1(sc_if, skip, reg, val) \ 192 sk_win_write_1(sc_if->sk_softc, \ 193 reg + ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN), val) 194 195 /* Block 0 registers, permanently mapped at iobase. */ 196 #define SK_RAP 0x0000 197 #define SK_CSR 0x0004 198 #define SK_LED 0x0006 199 #define SK_ISR 0x0008 /* interrupt source */ 200 #define SK_IMR 0x000C /* interrupt mask */ 201 #define SK_IESR 0x0010 /* interrupt hardware error source */ 202 #define SK_IEMR 0x0014 /* interrupt hardware error mask */ 203 #define SK_ISSR 0x0018 /* special interrupt source */ 204 #define SK_XM_IMR0 0x0020 205 #define SK_XM_ISR0 0x0028 206 #define SK_XM_PHYADDR0 0x0030 207 #define SK_XM_PHYDATA0 0x0034 208 #define SK_XM_IMR1 0x0040 209 #define SK_XM_ISR1 0x0048 210 #define SK_XM_PHYADDR1 0x0050 211 #define SK_XM_PHYDATA1 0x0054 212 #define SK_BMU_RX_CSR0 0x0060 213 #define SK_BMU_RX_CSR1 0x0064 214 #define SK_BMU_TXS_CSR0 0x0068 215 #define SK_BMU_TXA_CSR0 0x006C 216 #define SK_BMU_TXS_CSR1 0x0070 217 #define SK_BMU_TXA_CSR1 0x0074 218 219 /* SK_CSR register */ 220 #define SK_CSR_SW_RESET 0x0001 221 #define SK_CSR_SW_UNRESET 0x0002 222 #define SK_CSR_MASTER_RESET 0x0004 223 #define SK_CSR_MASTER_UNRESET 0x0008 224 #define SK_CSR_MASTER_STOP 0x0010 225 #define SK_CSR_MASTER_DONE 0x0020 226 #define SK_CSR_SW_IRQ_CLEAR 0x0040 227 #define SK_CSR_SW_IRQ_SET 0x0080 228 #define SK_CSR_SLOTSIZE 0x0100 /* 1 == 64 bits, 0 == 32 */ 229 #define SK_CSR_BUSCLOCK 0x0200 /* 1 == 33/66 Mhz, = 33 */ 230 231 /* SK_LED register */ 232 #define SK_LED_GREEN_OFF 0x01 233 #define SK_LED_GREEN_ON 0x02 234 235 /* SK_ISR register */ 236 #define SK_ISR_TX2_AS_CHECK 0x00000001 237 #define SK_ISR_TX2_AS_EOF 0x00000002 238 #define SK_ISR_TX2_AS_EOB 0x00000004 239 #define SK_ISR_TX2_S_CHECK 0x00000008 240 #define SK_ISR_TX2_S_EOF 0x00000010 241 #define SK_ISR_TX2_S_EOB 0x00000020 242 #define SK_ISR_TX1_AS_CHECK 0x00000040 243 #define SK_ISR_TX1_AS_EOF 0x00000080 244 #define SK_ISR_TX1_AS_EOB 0x00000100 245 #define SK_ISR_TX1_S_CHECK 0x00000200 246 #define SK_ISR_TX1_S_EOF 0x00000400 247 #define SK_ISR_TX1_S_EOB 0x00000800 248 #define SK_ISR_RX2_CHECK 0x00001000 249 #define SK_ISR_RX2_EOF 0x00002000 250 #define SK_ISR_RX2_EOB 0x00004000 251 #define SK_ISR_RX1_CHECK 0x00008000 252 #define SK_ISR_RX1_EOF 0x00010000 253 #define SK_ISR_RX1_EOB 0x00020000 254 #define SK_ISR_LINK2_OFLOW 0x00040000 255 #define SK_ISR_MAC2 0x00080000 256 #define SK_ISR_LINK1_OFLOW 0x00100000 257 #define SK_ISR_MAC1 0x00200000 258 #define SK_ISR_TIMER 0x00400000 259 #define SK_ISR_EXTERNAL_REG 0x00800000 260 #define SK_ISR_SW 0x01000000 261 #define SK_ISR_I2C_RDY 0x02000000 262 #define SK_ISR_TX2_TIMEO 0x04000000 263 #define SK_ISR_TX1_TIMEO 0x08000000 264 #define SK_ISR_RX2_TIMEO 0x10000000 265 #define SK_ISR_RX1_TIMEO 0x20000000 266 #define SK_ISR_RSVD 0x40000000 267 #define SK_ISR_HWERR 0x80000000 268 269 /* SK_IMR register */ 270 #define SK_IMR_TX2_AS_CHECK 0x00000001 271 #define SK_IMR_TX2_AS_EOF 0x00000002 272 #define SK_IMR_TX2_AS_EOB 0x00000004 273 #define SK_IMR_TX2_S_CHECK 0x00000008 274 #define SK_IMR_TX2_S_EOF 0x00000010 275 #define SK_IMR_TX2_S_EOB 0x00000020 276 #define SK_IMR_TX1_AS_CHECK 0x00000040 277 #define SK_IMR_TX1_AS_EOF 0x00000080 278 #define SK_IMR_TX1_AS_EOB 0x00000100 279 #define SK_IMR_TX1_S_CHECK 0x00000200 280 #define SK_IMR_TX1_S_EOF 0x00000400 281 #define SK_IMR_TX1_S_EOB 0x00000800 282 #define SK_IMR_RX2_CHECK 0x00001000 283 #define SK_IMR_RX2_EOF 0x00002000 284 #define SK_IMR_RX2_EOB 0x00004000 285 #define SK_IMR_RX1_CHECK 0x00008000 286 #define SK_IMR_RX1_EOF 0x00010000 287 #define SK_IMR_RX1_EOB 0x00020000 288 #define SK_IMR_LINK2_OFLOW 0x00040000 289 #define SK_IMR_MAC2 0x00080000 290 #define SK_IMR_LINK1_OFLOW 0x00100000 291 #define SK_IMR_MAC1 0x00200000 292 #define SK_IMR_TIMER 0x00400000 293 #define SK_IMR_EXTERNAL_REG 0x00800000 294 #define SK_IMR_SW 0x01000000 295 #define SK_IMR_I2C_RDY 0x02000000 296 #define SK_IMR_TX2_TIMEO 0x04000000 297 #define SK_IMR_TX1_TIMEO 0x08000000 298 #define SK_IMR_RX2_TIMEO 0x10000000 299 #define SK_IMR_RX1_TIMEO 0x20000000 300 #define SK_IMR_RSVD 0x40000000 301 #define SK_IMR_HWERR 0x80000000 302 303 #define SK_INTRS1 \ 304 (SK_IMR_RX1_EOF|SK_IMR_TX1_S_EOF|SK_IMR_MAC1) 305 306 #define SK_INTRS2 \ 307 (SK_IMR_RX2_EOF|SK_IMR_TX2_S_EOF|SK_IMR_MAC2) 308 309 /* SK_IESR register */ 310 #define SK_IESR_PAR_RX2 0x00000001 311 #define SK_IESR_PAR_RX1 0x00000002 312 #define SK_IESR_PAR_MAC2 0x00000004 313 #define SK_IESR_PAR_MAC1 0x00000008 314 #define SK_IESR_PAR_WR_RAM 0x00000010 315 #define SK_IESR_PAR_RD_RAM 0x00000020 316 #define SK_IESR_NO_TSTAMP_MAC2 0x00000040 317 #define SK_IESR_NO_TSTAMO_MAC1 0x00000080 318 #define SK_IESR_NO_STS_MAC2 0x00000100 319 #define SK_IESR_NO_STS_MAC1 0x00000200 320 #define SK_IESR_IRQ_STS 0x00000400 321 #define SK_IESR_MASTERERR 0x00000800 322 323 /* SK_IEMR register */ 324 #define SK_IEMR_PAR_RX2 0x00000001 325 #define SK_IEMR_PAR_RX1 0x00000002 326 #define SK_IEMR_PAR_MAC2 0x00000004 327 #define SK_IEMR_PAR_MAC1 0x00000008 328 #define SK_IEMR_PAR_WR_RAM 0x00000010 329 #define SK_IEMR_PAR_RD_RAM 0x00000020 330 #define SK_IEMR_NO_TSTAMP_MAC2 0x00000040 331 #define SK_IEMR_NO_TSTAMO_MAC1 0x00000080 332 #define SK_IEMR_NO_STS_MAC2 0x00000100 333 #define SK_IEMR_NO_STS_MAC1 0x00000200 334 #define SK_IEMR_IRQ_STS 0x00000400 335 #define SK_IEMR_MASTERERR 0x00000800 336 337 /* Block 2 */ 338 #define SK_MAC0_0 0x0100 339 #define SK_MAC0_1 0x0104 340 #define SK_MAC1_0 0x0108 341 #define SK_MAC1_1 0x010C 342 #define SK_MAC2_0 0x0110 343 #define SK_MAC2_1 0x0114 344 #define SK_CONNTYPE 0x0118 345 #define SK_PMDTYPE 0x0119 346 #define SK_CONFIG 0x011A 347 #define SK_CHIPVER 0x011B 348 #define SK_EPROM0 0x011C 349 #define SK_EPROM1 0x011D /* yukon/genesis */ 350 #define SK_EPROM2 0x011E /* yukon/genesis */ 351 #define SK_EPROM3 0x011F 352 #define SK_EP_ADDR 0x0120 353 #define SK_EP_DATA 0x0124 354 #define SK_EP_LOADCTL 0x0128 355 #define SK_EP_LOADTST 0x0129 356 #define SK_TIMERINIT 0x0130 357 #define SK_TIMER 0x0134 358 #define SK_TIMERCTL 0x0138 359 #define SK_TIMERTST 0x0139 360 #define SK_IMTIMERINIT 0x0140 361 #define SK_IMTIMER 0x0144 362 #define SK_IMTIMERCTL 0x0148 363 #define SK_IMTIMERTST 0x0149 364 #define SK_IMMR 0x014C 365 #define SK_IHWEMR 0x0150 366 #define SK_TESTCTL1 0x0158 367 #define SK_TESTCTL2 0x0159 368 #define SK_GPIO 0x015C 369 #define SK_I2CHWCTL 0x0160 370 #define SK_I2CHWDATA 0x0164 371 #define SK_I2CHWIRQ 0x0168 372 #define SK_I2CSW 0x016C 373 #define SK_BLNKINIT 0x0170 374 #define SK_BLNKCOUNT 0x0174 375 #define SK_BLNKCTL 0x0178 376 #define SK_BLNKSTS 0x0179 377 #define SK_BLNKTST 0x017A 378 379 #define SK_IMCTL_STOP 0x02 380 #define SK_IMCTL_START 0x04 381 382 #define SK_IMTIMER_TICKS_GENESIS 53 383 #define SK_IMTIMER_TICKS_YUKON 78 384 #define SK_IM_USECS(x, t) ((x) * (t)) 385 386 #define SK_IM_MIN 10 387 #define SK_IM_DEFAULT 100 388 #define SK_IM_MAX 10000 389 390 /* 391 * The SK_EPROM0 register contains a byte that describes the 392 * amount of SRAM mounted on the NIC. The value also tells if 393 * the chips are 64K or 128K. This affects the RAMbuffer address 394 * offset that we need to use. 395 */ 396 #define SK_RAMSIZE_512K_64 0x1 397 #define SK_RAMSIZE_1024K_128 0x2 398 #define SK_RAMSIZE_1024K_64 0x3 399 #define SK_RAMSIZE_2048K_128 0x4 400 401 #define SK_RBOFF_0 0x0 402 #define SK_RBOFF_80000 0x80000 403 404 /* 405 * SK_EEPROM1 contains the PHY type, which may be XMAC for 406 * fiber-based cards or BCOM for 1000baseT cards with a Broadcom 407 * PHY. 408 */ 409 #define SK_PHYTYPE_XMAC 0 /* integeated XMAC II PHY */ 410 #define SK_PHYTYPE_BCOM 1 /* Broadcom BCM5400 */ 411 #define SK_PHYTYPE_LONE 2 /* Level One LXT1000 */ 412 #define SK_PHYTYPE_NAT 3 /* National DP83891 */ 413 #define SK_PHYTYPE_MARV_COPPER 4 /* Marvell 88E1011S */ 414 #define SK_PHYTYPE_MARV_FIBER 5 /* Marvell 88E1011S (fiber) */ 415 416 /* 417 * PHY addresses. 418 */ 419 #define SK_PHYADDR_XMAC 0x0 420 #define SK_PHYADDR_BCOM 0x1 421 #define SK_PHYADDR_LONE 0x3 422 #define SK_PHYADDR_NAT 0x0 423 #define SK_PHYADDR_MARV 0x0 424 425 #define SK_CONFIG_SINGLEMAC 0x01 426 #define SK_CONFIG_DIS_DSL_CLK 0x02 427 428 #define SK_PMD_1000BASELX 0x4C 429 #define SK_PMD_1000BASESX 0x53 430 #define SK_PMD_1000BASECX 0x43 431 #define SK_PMD_1000BASETX 0x54 432 433 /* GPIO bits */ 434 #define SK_GPIO_DAT0 0x00000001 435 #define SK_GPIO_DAT1 0x00000002 436 #define SK_GPIO_DAT2 0x00000004 437 #define SK_GPIO_DAT3 0x00000008 438 #define SK_GPIO_DAT4 0x00000010 439 #define SK_GPIO_DAT5 0x00000020 440 #define SK_GPIO_DAT6 0x00000040 441 #define SK_GPIO_DAT7 0x00000080 442 #define SK_GPIO_DAT8 0x00000100 443 #define SK_GPIO_DAT9 0x00000200 444 #define SK_GPIO_DIR0 0x00010000 445 #define SK_GPIO_DIR1 0x00020000 446 #define SK_GPIO_DIR2 0x00040000 447 #define SK_GPIO_DIR3 0x00080000 448 #define SK_GPIO_DIR4 0x00100000 449 #define SK_GPIO_DIR5 0x00200000 450 #define SK_GPIO_DIR6 0x00400000 451 #define SK_GPIO_DIR7 0x00800000 452 #define SK_GPIO_DIR8 0x01000000 453 #define SK_GPIO_DIR9 0x02000000 454 455 /* Block 3 Ram interface and MAC arbiter registers */ 456 #define SK_RAMADDR 0x0180 457 #define SK_RAMDATA0 0x0184 458 #define SK_RAMDATA1 0x0188 459 #define SK_TO0 0x0190 460 #define SK_TO1 0x0191 461 #define SK_TO2 0x0192 462 #define SK_TO3 0x0193 463 #define SK_TO4 0x0194 464 #define SK_TO5 0x0195 465 #define SK_TO6 0x0196 466 #define SK_TO7 0x0197 467 #define SK_TO8 0x0198 468 #define SK_TO9 0x0199 469 #define SK_TO10 0x019A 470 #define SK_TO11 0x019B 471 #define SK_RITIMEO_TMR 0x019C 472 #define SK_RAMCTL 0x01A0 473 #define SK_RITIMER_TST 0x01A2 474 475 #define SK_RAMCTL_RESET 0x0001 476 #define SK_RAMCTL_UNRESET 0x0002 477 #define SK_RAMCTL_CLR_IRQ_WPAR 0x0100 478 #define SK_RAMCTL_CLR_IRQ_RPAR 0x0200 479 480 /* Mac arbiter registers */ 481 #define SK_MINIT_RX1 0x01B0 482 #define SK_MINIT_RX2 0x01B1 483 #define SK_MINIT_TX1 0x01B2 484 #define SK_MINIT_TX2 0x01B3 485 #define SK_MTIMEO_RX1 0x01B4 486 #define SK_MTIMEO_RX2 0x01B5 487 #define SK_MTIMEO_TX1 0x01B6 488 #define SK_MTIEMO_TX2 0x01B7 489 #define SK_MACARB_CTL 0x01B8 490 #define SK_MTIMER_TST 0x01BA 491 #define SK_RCINIT_RX1 0x01C0 492 #define SK_RCINIT_RX2 0x01C1 493 #define SK_RCINIT_TX1 0x01C2 494 #define SK_RCINIT_TX2 0x01C3 495 #define SK_RCTIMEO_RX1 0x01C4 496 #define SK_RCTIMEO_RX2 0x01C5 497 #define SK_RCTIMEO_TX1 0x01C6 498 #define SK_RCTIMEO_TX2 0x01C7 499 #define SK_RECOVERY_CTL 0x01C8 500 #define SK_RCTIMER_TST 0x01CA 501 502 /* Packet arbiter registers */ 503 #define SK_RXPA1_TINIT 0x01D0 504 #define SK_RXPA2_TINIT 0x01D4 505 #define SK_TXPA1_TINIT 0x01D8 506 #define SK_TXPA2_TINIT 0x01DC 507 #define SK_RXPA1_TIMEO 0x01E0 508 #define SK_RXPA2_TIMEO 0x01E4 509 #define SK_TXPA1_TIMEO 0x01E8 510 #define SK_TXPA2_TIMEO 0x01EC 511 #define SK_PKTARB_CTL 0x01F0 512 #define SK_PKTATB_TST 0x01F2 513 514 #define SK_PKTARB_TIMEOUT 0x2000 515 516 #define SK_PKTARBCTL_RESET 0x0001 517 #define SK_PKTARBCTL_UNRESET 0x0002 518 #define SK_PKTARBCTL_RXTO1_OFF 0x0004 519 #define SK_PKTARBCTL_RXTO1_ON 0x0008 520 #define SK_PKTARBCTL_RXTO2_OFF 0x0010 521 #define SK_PKTARBCTL_RXTO2_ON 0x0020 522 #define SK_PKTARBCTL_TXTO1_OFF 0x0040 523 #define SK_PKTARBCTL_TXTO1_ON 0x0080 524 #define SK_PKTARBCTL_TXTO2_OFF 0x0100 525 #define SK_PKTARBCTL_TXTO2_ON 0x0200 526 #define SK_PKTARBCTL_CLR_IRQ_RXTO1 0x0400 527 #define SK_PKTARBCTL_CLR_IRQ_RXTO2 0x0800 528 #define SK_PKTARBCTL_CLR_IRQ_TXTO1 0x1000 529 #define SK_PKTARBCTL_CLR_IRQ_TXTO2 0x2000 530 531 #define SK_MINIT_XMAC_B2 54 532 #define SK_MINIT_XMAC_C1 63 533 534 #define SK_MACARBCTL_RESET 0x0001 535 #define SK_MACARBCTL_UNRESET 0x0002 536 #define SK_MACARBCTL_FASTOE_OFF 0x0004 537 #define SK_MACARBCRL_FASTOE_ON 0x0008 538 539 #define SK_RCINIT_XMAC_B2 54 540 #define SK_RCINIT_XMAC_C1 0 541 542 #define SK_RECOVERYCTL_RX1_OFF 0x0001 543 #define SK_RECOVERYCTL_RX1_ON 0x0002 544 #define SK_RECOVERYCTL_RX2_OFF 0x0004 545 #define SK_RECOVERYCTL_RX2_ON 0x0008 546 #define SK_RECOVERYCTL_TX1_OFF 0x0010 547 #define SK_RECOVERYCTL_TX1_ON 0x0020 548 #define SK_RECOVERYCTL_TX2_OFF 0x0040 549 #define SK_RECOVERYCTL_TX2_ON 0x0080 550 551 #define SK_RECOVERY_XMAC_B2 \ 552 (SK_RECOVERYCTL_RX1_ON|SK_RECOVERYCTL_RX2_ON| \ 553 SK_RECOVERYCTL_TX1_ON|SK_RECOVERYCTL_TX2_ON) 554 555 #define SK_RECOVERY_XMAC_C1 \ 556 (SK_RECOVERYCTL_RX1_OFF|SK_RECOVERYCTL_RX2_OFF| \ 557 SK_RECOVERYCTL_TX1_OFF|SK_RECOVERYCTL_TX2_OFF) 558 559 /* Block 4 -- TX Arbiter MAC 1 */ 560 #define SK_TXAR1_TIMERINIT 0x0200 561 #define SK_TXAR1_TIMERVAL 0x0204 562 #define SK_TXAR1_LIMITINIT 0x0208 563 #define SK_TXAR1_LIMITCNT 0x020C 564 #define SK_TXAR1_COUNTERCTL 0x0210 565 #define SK_TXAR1_COUNTERTST 0x0212 566 #define SK_TXAR1_COUNTERSTS 0x0212 567 568 /* Block 5 -- TX Arbiter MAC 2 */ 569 #define SK_TXAR2_TIMERINIT 0x0280 570 #define SK_TXAR2_TIMERVAL 0x0284 571 #define SK_TXAR2_LIMITINIT 0x0288 572 #define SK_TXAR2_LIMITCNT 0x028C 573 #define SK_TXAR2_COUNTERCTL 0x0290 574 #define SK_TXAR2_COUNTERTST 0x0291 575 #define SK_TXAR2_COUNTERSTS 0x0292 576 577 #define SK_TXARCTL_OFF 0x01 578 #define SK_TXARCTL_ON 0x02 579 #define SK_TXARCTL_RATECTL_OFF 0x04 580 #define SK_TXARCTL_RATECTL_ON 0x08 581 #define SK_TXARCTL_ALLOC_OFF 0x10 582 #define SK_TXARCTL_ALLOC_ON 0x20 583 #define SK_TXARCTL_FSYNC_OFF 0x40 584 #define SK_TXARCTL_FSYNC_ON 0x80 585 586 /* Block 6 -- External registers */ 587 #define SK_EXTREG_BASE 0x300 588 #define SK_EXTREG_END 0x37C 589 590 /* Block 7 -- PCI config registers */ 591 #define SK_PCI_BASE 0x0380 592 #define SK_PCI_END 0x03FC 593 594 /* Compute offset of mirrored PCI register */ 595 #define SK_PCI_REG(reg) ((reg) + SK_PCI_BASE) 596 597 /* Block 8 -- RX queue 1 */ 598 #define SK_RXQ1_BUFCNT 0x0400 599 #define SK_RXQ1_BUFCTL 0x0402 600 #define SK_RXQ1_NEXTDESC 0x0404 601 #define SK_RXQ1_RXBUF_LO 0x0408 602 #define SK_RXQ1_RXBUF_HI 0x040C 603 #define SK_RXQ1_RXSTAT 0x0410 604 #define SK_RXQ1_TIMESTAMP 0x0414 605 #define SK_RXQ1_CSUM1 0x0418 606 #define SK_RXQ1_CSUM2 0x041A 607 #define SK_RXQ1_CSUM1_START 0x041C 608 #define SK_RXQ1_CSUM2_START 0x041E 609 #define SK_RXQ1_CURADDR_LO 0x0420 610 #define SK_RXQ1_CURADDR_HI 0x0424 611 #define SK_RXQ1_CURCNT_LO 0x0428 612 #define SK_RXQ1_CURCNT_HI 0x042C 613 #define SK_RXQ1_CURBYTES 0x0430 614 #define SK_RXQ1_BMU_CSR 0x0434 615 #define SK_RXQ1_WATERMARK 0x0438 616 #define SK_RXQ1_FLAG 0x043A 617 #define SK_RXQ1_TEST1 0x043C 618 #define SK_RXQ1_TEST2 0x0440 619 #define SK_RXQ1_TEST3 0x0444 620 621 /* Block 9 -- RX queue 2 */ 622 #define SK_RXQ2_BUFCNT 0x0480 623 #define SK_RXQ2_BUFCTL 0x0482 624 #define SK_RXQ2_NEXTDESC 0x0484 625 #define SK_RXQ2_RXBUF_LO 0x0488 626 #define SK_RXQ2_RXBUF_HI 0x048C 627 #define SK_RXQ2_RXSTAT 0x0490 628 #define SK_RXQ2_TIMESTAMP 0x0494 629 #define SK_RXQ2_CSUM1 0x0498 630 #define SK_RXQ2_CSUM2 0x049A 631 #define SK_RXQ2_CSUM1_START 0x049C 632 #define SK_RXQ2_CSUM2_START 0x049E 633 #define SK_RXQ2_CURADDR_LO 0x04A0 634 #define SK_RXQ2_CURADDR_HI 0x04A4 635 #define SK_RXQ2_CURCNT_LO 0x04A8 636 #define SK_RXQ2_CURCNT_HI 0x04AC 637 #define SK_RXQ2_CURBYTES 0x04B0 638 #define SK_RXQ2_BMU_CSR 0x04B4 639 #define SK_RXQ2_WATERMARK 0x04B8 640 #define SK_RXQ2_FLAG 0x04BA 641 #define SK_RXQ2_TEST1 0x04BC 642 #define SK_RXQ2_TEST2 0x04C0 643 #define SK_RXQ2_TEST3 0x04C4 644 645 #define SK_RXBMU_CLR_IRQ_ERR 0x00000001 646 #define SK_RXBMU_CLR_IRQ_EOF 0x00000002 647 #define SK_RXBMU_CLR_IRQ_EOB 0x00000004 648 #define SK_RXBMU_CLR_IRQ_PAR 0x00000008 649 #define SK_RXBMU_RX_START 0x00000010 650 #define SK_RXBMU_RX_STOP 0x00000020 651 #define SK_RXBMU_POLL_OFF 0x00000040 652 #define SK_RXBMU_POLL_ON 0x00000080 653 #define SK_RXBMU_TRANSFER_SM_RESET 0x00000100 654 #define SK_RXBMU_TRANSFER_SM_UNRESET 0x00000200 655 #define SK_RXBMU_DESCWR_SM_RESET 0x00000400 656 #define SK_RXBMU_DESCWR_SM_UNRESET 0x00000800 657 #define SK_RXBMU_DESCRD_SM_RESET 0x00001000 658 #define SK_RXBMU_DESCRD_SM_UNRESET 0x00002000 659 #define SK_RXBMU_SUPERVISOR_SM_RESET 0x00004000 660 #define SK_RXBMU_SUPERVISOR_SM_UNRESET 0x00008000 661 #define SK_RXBMU_PFI_SM_RESET 0x00010000 662 #define SK_RXBMU_PFI_SM_UNRESET 0x00020000 663 #define SK_RXBMU_FIFO_RESET 0x00040000 664 #define SK_RXBMU_FIFO_UNRESET 0x00080000 665 #define SK_RXBMU_DESC_RESET 0x00100000 666 #define SK_RXBMU_DESC_UNRESET 0x00200000 667 #define SK_RXBMU_SUPERVISOR_IDLE 0x01000000 668 669 #define SK_RXBMU_ONLINE \ 670 (SK_RXBMU_TRANSFER_SM_UNRESET|SK_RXBMU_DESCWR_SM_UNRESET| \ 671 SK_RXBMU_DESCRD_SM_UNRESET|SK_RXBMU_SUPERVISOR_SM_UNRESET| \ 672 SK_RXBMU_PFI_SM_UNRESET|SK_RXBMU_FIFO_UNRESET| \ 673 SK_RXBMU_DESC_UNRESET) 674 675 #define SK_RXBMU_OFFLINE \ 676 (SK_RXBMU_TRANSFER_SM_RESET|SK_RXBMU_DESCWR_SM_RESET| \ 677 SK_RXBMU_DESCRD_SM_RESET|SK_RXBMU_SUPERVISOR_SM_RESET| \ 678 SK_RXBMU_PFI_SM_RESET|SK_RXBMU_FIFO_RESET| \ 679 SK_RXBMU_DESC_RESET) 680 681 /* Block 12 -- TX sync queue 1 */ 682 #define SK_TXQS1_BUFCNT 0x0600 683 #define SK_TXQS1_BUFCTL 0x0602 684 #define SK_TXQS1_NEXTDESC 0x0604 685 #define SK_TXQS1_RXBUF_LO 0x0608 686 #define SK_TXQS1_RXBUF_HI 0x060C 687 #define SK_TXQS1_RXSTAT 0x0610 688 #define SK_TXQS1_CSUM_STARTVAL 0x0614 689 #define SK_TXQS1_CSUM_STARTPOS 0x0618 690 #define SK_TXQS1_CSUM_WRITEPOS 0x061A 691 #define SK_TXQS1_CURADDR_LO 0x0620 692 #define SK_TXQS1_CURADDR_HI 0x0624 693 #define SK_TXQS1_CURCNT_LO 0x0628 694 #define SK_TXQS1_CURCNT_HI 0x062C 695 #define SK_TXQS1_CURBYTES 0x0630 696 #define SK_TXQS1_BMU_CSR 0x0634 697 #define SK_TXQS1_WATERMARK 0x0638 698 #define SK_TXQS1_FLAG 0x063A 699 #define SK_TXQS1_TEST1 0x063C 700 #define SK_TXQS1_TEST2 0x0640 701 #define SK_TXQS1_TEST3 0x0644 702 703 /* Block 13 -- TX async queue 1 */ 704 #define SK_TXQA1_BUFCNT 0x0680 705 #define SK_TXQA1_BUFCTL 0x0682 706 #define SK_TXQA1_NEXTDESC 0x0684 707 #define SK_TXQA1_RXBUF_LO 0x0688 708 #define SK_TXQA1_RXBUF_HI 0x068C 709 #define SK_TXQA1_RXSTAT 0x0690 710 #define SK_TXQA1_CSUM_STARTVAL 0x0694 711 #define SK_TXQA1_CSUM_STARTPOS 0x0698 712 #define SK_TXQA1_CSUM_WRITEPOS 0x069A 713 #define SK_TXQA1_CURADDR_LO 0x06A0 714 #define SK_TXQA1_CURADDR_HI 0x06A4 715 #define SK_TXQA1_CURCNT_LO 0x06A8 716 #define SK_TXQA1_CURCNT_HI 0x06AC 717 #define SK_TXQA1_CURBYTES 0x06B0 718 #define SK_TXQA1_BMU_CSR 0x06B4 719 #define SK_TXQA1_WATERMARK 0x06B8 720 #define SK_TXQA1_FLAG 0x06BA 721 #define SK_TXQA1_TEST1 0x06BC 722 #define SK_TXQA1_TEST2 0x06C0 723 #define SK_TXQA1_TEST3 0x06C4 724 725 /* Block 14 -- TX sync queue 2 */ 726 #define SK_TXQS2_BUFCNT 0x0700 727 #define SK_TXQS2_BUFCTL 0x0702 728 #define SK_TXQS2_NEXTDESC 0x0704 729 #define SK_TXQS2_RXBUF_LO 0x0708 730 #define SK_TXQS2_RXBUF_HI 0x070C 731 #define SK_TXQS2_RXSTAT 0x0710 732 #define SK_TXQS2_CSUM_STARTVAL 0x0714 733 #define SK_TXQS2_CSUM_STARTPOS 0x0718 734 #define SK_TXQS2_CSUM_WRITEPOS 0x071A 735 #define SK_TXQS2_CURADDR_LO 0x0720 736 #define SK_TXQS2_CURADDR_HI 0x0724 737 #define SK_TXQS2_CURCNT_LO 0x0728 738 #define SK_TXQS2_CURCNT_HI 0x072C 739 #define SK_TXQS2_CURBYTES 0x0730 740 #define SK_TXQS2_BMU_CSR 0x0734 741 #define SK_TXQS2_WATERMARK 0x0738 742 #define SK_TXQS2_FLAG 0x073A 743 #define SK_TXQS2_TEST1 0x073C 744 #define SK_TXQS2_TEST2 0x0740 745 #define SK_TXQS2_TEST3 0x0744 746 747 /* Block 15 -- TX async queue 2 */ 748 #define SK_TXQA2_BUFCNT 0x0780 749 #define SK_TXQA2_BUFCTL 0x0782 750 #define SK_TXQA2_NEXTDESC 0x0784 751 #define SK_TXQA2_RXBUF_LO 0x0788 752 #define SK_TXQA2_RXBUF_HI 0x078C 753 #define SK_TXQA2_RXSTAT 0x0790 754 #define SK_TXQA2_CSUM_STARTVAL 0x0794 755 #define SK_TXQA2_CSUM_STARTPOS 0x0798 756 #define SK_TXQA2_CSUM_WRITEPOS 0x079A 757 #define SK_TXQA2_CURADDR_LO 0x07A0 758 #define SK_TXQA2_CURADDR_HI 0x07A4 759 #define SK_TXQA2_CURCNT_LO 0x07A8 760 #define SK_TXQA2_CURCNT_HI 0x07AC 761 #define SK_TXQA2_CURBYTES 0x07B0 762 #define SK_TXQA2_BMU_CSR 0x07B4 763 #define SK_TXQA2_WATERMARK 0x07B8 764 #define SK_TXQA2_FLAG 0x07BA 765 #define SK_TXQA2_TEST1 0x07BC 766 #define SK_TXQA2_TEST2 0x07C0 767 #define SK_TXQA2_TEST3 0x07C4 768 769 #define SK_TXBMU_CLR_IRQ_ERR 0x00000001 770 #define SK_TXBMU_CLR_IRQ_EOF 0x00000002 771 #define SK_TXBMU_CLR_IRQ_EOB 0x00000004 772 #define SK_TXBMU_TX_START 0x00000010 773 #define SK_TXBMU_TX_STOP 0x00000020 774 #define SK_TXBMU_POLL_OFF 0x00000040 775 #define SK_TXBMU_POLL_ON 0x00000080 776 #define SK_TXBMU_TRANSFER_SM_RESET 0x00000100 777 #define SK_TXBMU_TRANSFER_SM_UNRESET 0x00000200 778 #define SK_TXBMU_DESCWR_SM_RESET 0x00000400 779 #define SK_TXBMU_DESCWR_SM_UNRESET 0x00000800 780 #define SK_TXBMU_DESCRD_SM_RESET 0x00001000 781 #define SK_TXBMU_DESCRD_SM_UNRESET 0x00002000 782 #define SK_TXBMU_SUPERVISOR_SM_RESET 0x00004000 783 #define SK_TXBMU_SUPERVISOR_SM_UNRESET 0x00008000 784 #define SK_TXBMU_PFI_SM_RESET 0x00010000 785 #define SK_TXBMU_PFI_SM_UNRESET 0x00020000 786 #define SK_TXBMU_FIFO_RESET 0x00040000 787 #define SK_TXBMU_FIFO_UNRESET 0x00080000 788 #define SK_TXBMU_DESC_RESET 0x00100000 789 #define SK_TXBMU_DESC_UNRESET 0x00200000 790 #define SK_TXBMU_SUPERVISOR_IDLE 0x01000000 791 792 #define SK_TXBMU_ONLINE \ 793 (SK_TXBMU_TRANSFER_SM_UNRESET|SK_TXBMU_DESCWR_SM_UNRESET| \ 794 SK_TXBMU_DESCRD_SM_UNRESET|SK_TXBMU_SUPERVISOR_SM_UNRESET| \ 795 SK_TXBMU_PFI_SM_UNRESET|SK_TXBMU_FIFO_UNRESET| \ 796 SK_TXBMU_DESC_UNRESET|SK_TXBMU_POLL_ON) 797 798 #define SK_TXBMU_OFFLINE \ 799 (SK_TXBMU_TRANSFER_SM_RESET|SK_TXBMU_DESCWR_SM_RESET| \ 800 SK_TXBMU_DESCRD_SM_RESET|SK_TXBMU_SUPERVISOR_SM_RESET| \ 801 SK_TXBMU_PFI_SM_RESET|SK_TXBMU_FIFO_RESET| \ 802 SK_TXBMU_DESC_RESET|SK_TXBMU_POLL_OFF) 803 804 /* Block 16 -- Receive RAMbuffer 1 */ 805 #define SK_RXRB1_START 0x0800 806 #define SK_RXRB1_END 0x0804 807 #define SK_RXRB1_WR_PTR 0x0808 808 #define SK_RXRB1_RD_PTR 0x080C 809 #define SK_RXRB1_UTHR_PAUSE 0x0810 810 #define SK_RXRB1_LTHR_PAUSE 0x0814 811 #define SK_RXRB1_UTHR_HIPRIO 0x0818 812 #define SK_RXRB1_UTHR_LOPRIO 0x081C 813 #define SK_RXRB1_PKTCNT 0x0820 814 #define SK_RXRB1_LVL 0x0824 815 #define SK_RXRB1_CTLTST 0x0828 816 817 /* Block 17 -- Receive RAMbuffer 2 */ 818 #define SK_RXRB2_START 0x0880 819 #define SK_RXRB2_END 0x0884 820 #define SK_RXRB2_WR_PTR 0x0888 821 #define SK_RXRB2_RD_PTR 0x088C 822 #define SK_RXRB2_UTHR_PAUSE 0x0890 823 #define SK_RXRB2_LTHR_PAUSE 0x0894 824 #define SK_RXRB2_UTHR_HIPRIO 0x0898 825 #define SK_RXRB2_UTHR_LOPRIO 0x089C 826 #define SK_RXRB2_PKTCNT 0x08A0 827 #define SK_RXRB2_LVL 0x08A4 828 #define SK_RXRB2_CTLTST 0x08A8 829 830 /* Block 20 -- Sync. Transmit RAMbuffer 1 */ 831 #define SK_TXRBS1_START 0x0A00 832 #define SK_TXRBS1_END 0x0A04 833 #define SK_TXRBS1_WR_PTR 0x0A08 834 #define SK_TXRBS1_RD_PTR 0x0A0C 835 #define SK_TXRBS1_PKTCNT 0x0A20 836 #define SK_TXRBS1_LVL 0x0A24 837 #define SK_TXRBS1_CTLTST 0x0A28 838 839 /* Block 21 -- Async. Transmit RAMbuffer 1 */ 840 #define SK_TXRBA1_START 0x0A80 841 #define SK_TXRBA1_END 0x0A84 842 #define SK_TXRBA1_WR_PTR 0x0A88 843 #define SK_TXRBA1_RD_PTR 0x0A8C 844 #define SK_TXRBA1_PKTCNT 0x0AA0 845 #define SK_TXRBA1_LVL 0x0AA4 846 #define SK_TXRBA1_CTLTST 0x0AA8 847 848 /* Block 22 -- Sync. Transmit RAMbuffer 2 */ 849 #define SK_TXRBS2_START 0x0B00 850 #define SK_TXRBS2_END 0x0B04 851 #define SK_TXRBS2_WR_PTR 0x0B08 852 #define SK_TXRBS2_RD_PTR 0x0B0C 853 #define SK_TXRBS2_PKTCNT 0x0B20 854 #define SK_TXRBS2_LVL 0x0B24 855 #define SK_TXRBS2_CTLTST 0x0B28 856 857 /* Block 23 -- Async. Transmit RAMbuffer 2 */ 858 #define SK_TXRBA2_START 0x0B80 859 #define SK_TXRBA2_END 0x0B84 860 #define SK_TXRBA2_WR_PTR 0x0B88 861 #define SK_TXRBA2_RD_PTR 0x0B8C 862 #define SK_TXRBA2_PKTCNT 0x0BA0 863 #define SK_TXRBA2_LVL 0x0BA4 864 #define SK_TXRBA2_CTLTST 0x0BA8 865 866 #define SK_RBCTL_RESET 0x00000001 867 #define SK_RBCTL_UNRESET 0x00000002 868 #define SK_RBCTL_OFF 0x00000004 869 #define SK_RBCTL_ON 0x00000008 870 #define SK_RBCTL_STORENFWD_OFF 0x00000010 871 #define SK_RBCTL_STORENFWD_ON 0x00000020 872 873 /* Block 24 -- RX MAC FIFO 1 regisrers and LINK_SYNC counter */ 874 #define SK_RXF1_END 0x0C00 875 #define SK_RXF1_WPTR 0x0C04 876 #define SK_RXF1_RPTR 0x0C0C 877 #define SK_RXF1_PKTCNT 0x0C10 878 #define SK_RXF1_LVL 0x0C14 879 #define SK_RXF1_MACCTL 0x0C18 880 #define SK_RXF1_CTL 0x0C1C 881 #define SK_RXLED1_CNTINIT 0x0C20 882 #define SK_RXLED1_COUNTER 0x0C24 883 #define SK_RXLED1_CTL 0x0C28 884 #define SK_RXLED1_TST 0x0C29 885 #define SK_LINK_SYNC1_CINIT 0x0C30 886 #define SK_LINK_SYNC1_COUNTER 0x0C34 887 #define SK_LINK_SYNC1_CTL 0x0C38 888 #define SK_LINK_SYNC1_TST 0x0C39 889 #define SK_LINKLED1_CTL 0x0C3C 890 891 #define SK_FIFO_END 0x3F 892 893 /* Receive MAC FIFO 1 (Yukon Only) */ 894 #define SK_RXMF1_END 0x0C40 895 #define SK_RXMF1_THRESHOLD 0x0C44 896 #define SK_RXMF1_CTRL_TEST 0x0C48 897 #define SK_RXMF1_FLUSH_MASK 0x0C4C 898 #define SK_RXMF1_FLUSH_THRESHOLD 0x0C50 899 #define SK_RXMF1_WRITE_PTR 0x0C60 900 #define SK_RXMF1_WRITE_LEVEL 0x0C68 901 #define SK_RXMF1_READ_PTR 0x0C70 902 #define SK_RXMF1_READ_LEVEL 0x0C78 903 904 /* Receive MAC FIFO 1 Control/Test */ 905 #define SK_RFCTL_WR_PTR_TST_ON 0x00004000 /* Write pointer test on*/ 906 #define SK_RFCTL_WR_PTR_TST_OFF 0x00002000 /* Write pointer test off */ 907 #define SK_RFCTL_WR_PTR_STEP 0x00001000 /* Write pointer increment */ 908 #define SK_RFCTL_RD_PTR_TST_ON 0x00000400 /* Read pointer test on */ 909 #define SK_RFCTL_RD_PTR_TST_OFF 0x00000200 /* Read pointer test off */ 910 #define SK_RFCTL_RD_PTR_STEP 0x00000100 /* Read pointer increment */ 911 #define SK_RFCTL_FIFO_FLUSH_OFF 0x00000080 /* RX FIFO Flsuh mode off */ 912 #define SK_RFCTL_FIFO_FLUSH_ON 0x00000040 /* RX FIFO Flush mode on */ 913 #define SK_RFCTL_RX_FIFO_OVER 0x00000020 /* Clear IRQ RX FIFO Overrun */ 914 #define SK_RFCTL_FRAME_RX_DONE 0x00000010 /* Clear IRQ Frame RX Done */ 915 #define SK_RFCTL_OPERATION_ON 0x00000008 /* Operational mode on */ 916 #define SK_RFCTL_OPERATION_OFF 0x00000004 /* Operational mode off */ 917 #define SK_RFCTL_RESET_CLEAR 0x00000002 /* MAC FIFO Reset Clear */ 918 #define SK_RFCTL_RESET_SET 0x00000001 /* MAC FIFO Reset Set */ 919 920 #define SK_RFCTL_FIFO_THRESHOLD 0x0a /* flush threshold (default) */ 921 922 /* Block 25 -- RX MAC FIFO 2 regisrers and LINK_SYNC counter */ 923 #define SK_RXF2_END 0x0C80 924 #define SK_RXF2_WPTR 0x0C84 925 #define SK_RXF2_RPTR 0x0C8C 926 #define SK_RXF2_PKTCNT 0x0C90 927 #define SK_RXF2_LVL 0x0C94 928 #define SK_RXF2_MACCTL 0x0C98 929 #define SK_RXF2_CTL 0x0C9C 930 #define SK_RXLED2_CNTINIT 0x0CA0 931 #define SK_RXLED2_COUNTER 0x0CA4 932 #define SK_RXLED2_CTL 0x0CA8 933 #define SK_RXLED2_TST 0x0CA9 934 #define SK_LINK_SYNC2_CINIT 0x0CB0 935 #define SK_LINK_SYNC2_COUNTER 0x0CB4 936 #define SK_LINK_SYNC2_CTL 0x0CB8 937 #define SK_LINK_SYNC2_TST 0x0CB9 938 #define SK_LINKLED2_CTL 0x0CBC 939 940 #define SK_RXMACCTL_CLR_IRQ_NOSTS 0x00000001 941 #define SK_RXMACCTL_CLR_IRQ_NOTSTAMP 0x00000002 942 #define SK_RXMACCTL_TSTAMP_OFF 0x00000004 943 #define SK_RXMACCTL_RSTAMP_ON 0x00000008 944 #define SK_RXMACCTL_FLUSH_OFF 0x00000010 945 #define SK_RXMACCTL_FLUSH_ON 0x00000020 946 #define SK_RXMACCTL_PAUSE_OFF 0x00000040 947 #define SK_RXMACCTL_PAUSE_ON 0x00000080 948 #define SK_RXMACCTL_AFULL_OFF 0x00000100 949 #define SK_RXMACCTL_AFULL_ON 0x00000200 950 #define SK_RXMACCTL_VALIDTIME_PATCH_OFF 0x00000400 951 #define SK_RXMACCTL_VALIDTIME_PATCH_ON 0x00000800 952 #define SK_RXMACCTL_RXRDY_PATCH_OFF 0x00001000 953 #define SK_RXMACCTL_RXRDY_PATCH_ON 0x00002000 954 #define SK_RXMACCTL_STS_TIMEO 0x00FF0000 955 #define SK_RXMACCTL_TSTAMP_TIMEO 0xFF000000 956 957 #define SK_RXLEDCTL_ENABLE 0x0001 958 #define SK_RXLEDCTL_COUNTER_STOP 0x0002 959 #define SK_RXLEDCTL_COUNTER_START 0x0004 960 961 #define SK_LINKLED_OFF 0x0001 962 #define SK_LINKLED_ON 0x0002 963 #define SK_LINKLED_LINKSYNC_OFF 0x0004 964 #define SK_LINKLED_LINKSYNC_ON 0x0008 965 #define SK_LINKLED_BLINK_OFF 0x0010 966 #define SK_LINKLED_BLINK_ON 0x0020 967 968 /* Block 26 -- TX MAC FIFO 1 regisrers */ 969 #define SK_TXF1_END 0x0D00 970 #define SK_TXF1_WPTR 0x0D04 971 #define SK_TXF1_RPTR 0x0D0C 972 #define SK_TXF1_PKTCNT 0x0D10 973 #define SK_TXF1_LVL 0x0D14 974 #define SK_TXF1_MACCTL 0x0D18 975 #define SK_TXF1_CTL 0x0D1C 976 #define SK_TXLED1_CNTINIT 0x0D20 977 #define SK_TXLED1_COUNTER 0x0D24 978 #define SK_TXLED1_CTL 0x0D28 979 #define SK_TXLED1_TST 0x0D29 980 981 /* Transmit MAC FIFO 1 (Yukon Only) */ 982 #define SK_TXMF1_END 0x0D40 983 #define SK_TXMF1_THRESHOLD 0x0D44 984 #define SK_TXMF1_CTRL_TEST 0x0D48 985 #define SK_TXMF1_WRITE_PTR 0x0D60 986 #define SK_TXMF1_WRITE_SHADOW 0x0D64 987 #define SK_TXMF1_WRITE_LEVEL 0x0D68 988 #define SK_TXMF1_READ_PTR 0x0D70 989 #define SK_TXMF1_RESTART_PTR 0x0D74 990 #define SK_TXMF1_READ_LEVEL 0x0D78 991 992 /* Transmit MAC FIFO Control/Test */ 993 #define SK_TFCTL_WR_PTR_TST_ON 0x00004000 /* Write pointer test on*/ 994 #define SK_TFCTL_WR_PTR_TST_OFF 0x00002000 /* Write pointer test off */ 995 #define SK_TFCTL_WR_PTR_STEP 0x00001000 /* Write pointer increment */ 996 #define SK_TFCTL_RD_PTR_TST_ON 0x00000400 /* Read pointer test on */ 997 #define SK_TFCTL_RD_PTR_TST_OFF 0x00000200 /* Read pointer test off */ 998 #define SK_TFCTL_RD_PTR_STEP 0x00000100 /* Read pointer increment */ 999 #define SK_TFCTL_TX_FIFO_UNDER 0x00000040 /* Clear IRQ TX FIFO Under */ 1000 #define SK_TFCTL_FRAME_TX_DONE 0x00000020 /* Clear IRQ Frame TX Done */ 1001 #define SK_TFCTL_IRQ_PARITY_ER 0x00000010 /* Clear IRQ Parity Error */ 1002 #define SK_TFCTL_OPERATION_ON 0x00000008 /* Operational mode on */ 1003 #define SK_TFCTL_OPERATION_OFF 0x00000004 /* Operational mode off */ 1004 #define SK_TFCTL_RESET_CLEAR 0x00000002 /* MAC FIFO Reset Clear */ 1005 #define SK_TFCTL_RESET_SET 0x00000001 /* MAC FIFO Reset Set */ 1006 1007 /* Block 27 -- TX MAC FIFO 2 regisrers */ 1008 #define SK_TXF2_END 0x0D80 1009 #define SK_TXF2_WPTR 0x0D84 1010 #define SK_TXF2_RPTR 0x0D8C 1011 #define SK_TXF2_PKTCNT 0x0D90 1012 #define SK_TXF2_LVL 0x0D94 1013 #define SK_TXF2_MACCTL 0x0D98 1014 #define SK_TXF2_CTL 0x0D9C 1015 #define SK_TXLED2_CNTINIT 0x0DA0 1016 #define SK_TXLED2_COUNTER 0x0DA4 1017 #define SK_TXLED2_CTL 0x0DA8 1018 #define SK_TXLED2_TST 0x0DA9 1019 1020 #define SK_TXMACCTL_XMAC_RESET 0x00000001 1021 #define SK_TXMACCTL_XMAC_UNRESET 0x00000002 1022 #define SK_TXMACCTL_LOOP_OFF 0x00000004 1023 #define SK_TXMACCTL_LOOP_ON 0x00000008 1024 #define SK_TXMACCTL_FLUSH_OFF 0x00000010 1025 #define SK_TXMACCTL_FLUSH_ON 0x00000020 1026 #define SK_TXMACCTL_WAITEMPTY_OFF 0x00000040 1027 #define SK_TXMACCTL_WAITEMPTY_ON 0x00000080 1028 #define SK_TXMACCTL_AFULL_OFF 0x00000100 1029 #define SK_TXMACCTL_AFULL_ON 0x00000200 1030 #define SK_TXMACCTL_TXRDY_PATCH_OFF 0x00000400 1031 #define SK_TXMACCTL_RXRDY_PATCH_ON 0x00000800 1032 #define SK_TXMACCTL_PKT_RECOVERY_OFF 0x00001000 1033 #define SK_TXMACCTL_PKT_RECOVERY_ON 0x00002000 1034 #define SK_TXMACCTL_CLR_IRQ_PERR 0x00008000 1035 #define SK_TXMACCTL_WAITAFTERFLUSH 0x00010000 1036 1037 #define SK_TXLEDCTL_ENABLE 0x0001 1038 #define SK_TXLEDCTL_COUNTER_STOP 0x0002 1039 #define SK_TXLEDCTL_COUNTER_START 0x0004 1040 1041 #define SK_FIFO_RESET 0x00000001 1042 #define SK_FIFO_UNRESET 0x00000002 1043 #define SK_FIFO_OFF 0x00000004 1044 #define SK_FIFO_ON 0x00000008 1045 1046 /* Block 28 -- Descriptor Poll Timer */ 1047 #define SK_DPT_INIT 0x0e00 /* Initial value 24 bits */ 1048 #define SK_DPT_TIMER 0x0e04 /* Mul of 78.12MHz clk (24b) */ 1049 1050 #define SK_DPT_TIMER_MAX 0x00ffffffff /* 214.75ms at 78.125MHz */ 1051 1052 #define SK_DPT_TIMER_CTRL 0x0e08 /* Timer Control 16 bits */ 1053 #define SK_DPT_TCTL_STOP 0x0001 /* Stop Timer */ 1054 #define SK_DPT_TCTL_START 0x0002 /* Start Timer */ 1055 1056 #define SK_DPT_TIMER_TEST 0x0e0a /* Timer Test 16 bits */ 1057 #define SK_DPT_TTEST_STEP 0x0001 /* Timer Decrement */ 1058 #define SK_DPT_TTEST_OFF 0x0002 /* Test Mode Off */ 1059 #define SK_DPT_TTEST_ON 0x0004 /* Test Mode On */ 1060 1061 /* Block 29 -- reserved */ 1062 1063 /* Block 30 -- GMAC/GPHY Control Registers (Yukon Only)*/ 1064 #define SK_GMAC_CTRL 0x0f00 /* GMAC Control Register */ 1065 #define SK_GPHY_CTRL 0x0f04 /* GPHY Control Register */ 1066 #define SK_GMAC_ISR 0x0f08 /* GMAC Interrupt Source Register */ 1067 #define SK_GMAC_IMR 0x0f0c /* GMAC Interrupt Mask Register */ 1068 #define SK_LINK_CTRL 0x0f10 /* Link Control Register (LCR) */ 1069 #define SK_WOL_CTRL 0x0f20 /* Wake on LAN Control Register */ 1070 #define SK_MAC_ADDR_LOW 0x0f24 /* Mack Address Registers LOW */ 1071 #define SK_MAC_ADDR_HIGH 0x0f28 /* Mack Address Registers HIGH */ 1072 #define SK_PAT_READ_PTR 0x0f2c /* Pattern Read Pointer Register */ 1073 #define SK_PAT_LEN_REG0 0x0f30 /* Pattern Length Register 0 */ 1074 #define SK_PAT_LEN0 0x0f30 /* Pattern Length 0 */ 1075 #define SK_PAT_LEN1 0x0f31 /* Pattern Length 1 */ 1076 #define SK_PAT_LEN2 0x0f32 /* Pattern Length 2 */ 1077 #define SK_PAT_LEN3 0x0f33 /* Pattern Length 3 */ 1078 #define SK_PAT_LEN_REG1 0x0f34 /* Pattern Length Register 1 */ 1079 #define SK_PAT_LEN4 0x0f34 /* Pattern Length 4 */ 1080 #define SK_PAT_LEN5 0x0f35 /* Pattern Length 5 */ 1081 #define SK_PAT_LEN6 0x0f36 /* Pattern Length 6 */ 1082 #define SK_PAT_LEN7 0x0f37 /* Pattern Length 7 */ 1083 #define SK_PAT_CTR_REG0 0x0f38 /* Pattern Counter Register 0 */ 1084 #define SK_PAT_CTR0 0x0f38 /* Pattern Counter 0 */ 1085 #define SK_PAT_CTR1 0x0f39 /* Pattern Counter 1 */ 1086 #define SK_PAT_CTR2 0x0f3a /* Pattern Counter 2 */ 1087 #define SK_PAT_CTR3 0x0f3b /* Pattern Counter 3 */ 1088 #define SK_PAT_CTR_REG1 0x0f3c /* Pattern Counter Register 1 */ 1089 #define SK_PAT_CTR4 0x0f3c /* Pattern Counter 4 */ 1090 #define SK_PAT_CTR5 0x0f3d /* Pattern Counter 5 */ 1091 #define SK_PAT_CTR6 0x0f3e /* Pattern Counter 6 */ 1092 #define SK_PAT_CTR7 0x0f3f /* Pattern Counter 7 */ 1093 1094 #define SK_GMAC_LOOP_ON 0x00000020 /* Loopback mode for testing */ 1095 #define SK_GMAC_LOOP_OFF 0x00000010 /* purposes */ 1096 #define SK_GMAC_PAUSE_ON 0x00000008 /* enable forward of pause */ 1097 #define SK_GMAC_PAUSE_OFF 0x00000004 /* signal to GMAC */ 1098 #define SK_GMAC_RESET_CLEAR 0x00000002 /* Clear GMAC Reset */ 1099 #define SK_GMAC_RESET_SET 0x00000001 /* Set GMAC Reset */ 1100 1101 #define SK_GPHY_SEL_BDT 0x10000000 /* Select Bidirectional xfer */ 1102 #define SK_GPHY_INT_POL_HI 0x08000000 /* IRQ Polarity Active */ 1103 #define SK_GPHY_75_OHM 0x04000000 /* Use 75 Ohm Termination */ 1104 #define SK_GPHY_DIS_FC 0x02000000 /* Disable Auto Fiber/Copper */ 1105 #define SK_GPHY_DIS_SLEEP 0x01000000 /* Disable Energy Detect */ 1106 #define SK_GPHY_HWCFG_M_3 0x00800000 /* HWCFG_MODE[3] */ 1107 #define SK_GPHY_HWCFG_M_2 0x00400000 /* HWCFG_MODE[2] */ 1108 #define SK_GPHY_HWCFG_M_1 0x00200000 /* HWCFG_MODE[1] */ 1109 #define SK_GPHY_HWCFG_M_0 0x00100000 /* HWCFG_MODE[0] */ 1110 #define SK_GPHY_ANEG_0 0x00080000 /* ANEG[0] */ 1111 #define SK_GPHY_ENA_XC 0x00040000 /* Enable MDI Crossover */ 1112 #define SK_GPHY_DIS_125 0x00020000 /* Disable 125MHz Clock */ 1113 #define SK_GPHY_ANEG_3 0x00010000 /* ANEG[3] */ 1114 #define SK_GPHY_ANEG_2 0x00008000 /* ANEG[2] */ 1115 #define SK_GPHY_ANEG_1 0x00004000 /* ANEG[1] */ 1116 #define SK_GPHY_ENA_PAUSE 0x00002000 /* Enable Pause */ 1117 #define SK_GPHY_PHYADDR_4 0x00001000 /* Bit 4 of Phy Addr */ 1118 #define SK_GPHY_PHYADDR_3 0x00000800 /* Bit 3 of Phy Addr */ 1119 #define SK_GPHY_PHYADDR_2 0x00000400 /* Bit 2 of Phy Addr */ 1120 #define SK_GPHY_PHYADDR_1 0x00000200 /* Bit 1 of Phy Addr */ 1121 #define SK_GPHY_PHYADDR_0 0x00000100 /* Bit 0 of Phy Addr */ 1122 #define SK_GPHY_RESET_CLEAR 0x00000002 /* Clear GPHY Reset */ 1123 #define SK_GPHY_RESET_SET 0x00000001 /* Set GPHY Reset */ 1124 1125 #define SK_GPHY_COPPER (SK_GPHY_HWCFG_M_0 | SK_GPHY_HWCFG_M_1 | \ 1126 SK_GPHY_HWCFG_M_2 | SK_GPHY_HWCFG_M_3 ) 1127 #define SK_GPHY_FIBER (SK_GPHY_HWCFG_M_0 | SK_GPHY_HWCFG_M_1 | \ 1128 SK_GPHY_HWCFG_M_2 ) 1129 #define SK_GPHY_ANEG_ALL (SK_GPHY_ANEG_0 | SK_GPHY_ANEG_1 | \ 1130 SK_GPHY_ANEG_2 | SK_GPHY_ANEG_3 ) 1131 1132 #define SK_GMAC_INT_TX_OFLOW 0x20 /* Transmit Counter Overflow */ 1133 #define SK_GMAC_INT_RX_OFLOW 0x10 /* Receiver Overflow */ 1134 #define SK_GMAC_INT_TX_UNDER 0x08 /* Transmit FIFO Underrun */ 1135 #define SK_GMAC_INT_TX_DONE 0x04 /* Transmit Complete */ 1136 #define SK_GMAC_INT_RX_OVER 0x02 /* Receive FIFO Overrun */ 1137 #define SK_GMAC_INT_RX_DONE 0x01 /* Receive Complete */ 1138 1139 #define SK_LINK_RESET_CLEAR 0x0002 /* Link Reset Clear */ 1140 #define SK_LINK_RESET_SET 0x0001 /* Link Reset Set */ 1141 1142 /* Block 31 -- reserved */ 1143 1144 /* Block 32-33 -- Pattern Ram */ 1145 #define SK_WOL_PRAM 0x1000 1146 1147 /* Block 0x22 - 0x3f -- reserved */ 1148 1149 /* Block 0x40 to 0x4F -- XMAC 1 registers */ 1150 #define SK_XMAC1_BASE 0x2000 1151 1152 /* Block 0x50 to 0x5F -- MARV 1 registers */ 1153 #define SK_MARV1_BASE 0x2800 1154 1155 /* Block 0x60 to 0x6F -- XMAC 2 registers */ 1156 #define SK_XMAC2_BASE 0x3000 1157 1158 /* Block 0x70 to 0x7F -- MARV 2 registers */ 1159 #define SK_MARV2_BASE 0x3800 1160 1161 /* Compute relative offset of an XMAC register in the XMAC window(s). */ 1162 #define SK_XMAC_REG(sc, reg) (((reg) * 2) + SK_XMAC1_BASE + \ 1163 (((sc)->sk_port) * (SK_XMAC2_BASE - SK_XMAC1_BASE))) 1164 1165 #if 0 1166 #define SK_XM_READ_4(sc, reg) \ 1167 ((sk_win_read_2(sc->sk_softc, \ 1168 SK_XMAC_REG(sc, reg)) & 0xFFFF) | \ 1169 ((sk_win_read_2(sc->sk_softc, \ 1170 SK_XMAC_REG(sc, reg + 2)) & 0xFFFF) << 16)) 1171 1172 #define SK_XM_WRITE_4(sc, reg, val) \ 1173 sk_win_write_2(sc->sk_softc, SK_XMAC_REG(sc, reg), \ 1174 ((val) & 0xFFFF)); \ 1175 sk_win_write_2(sc->sk_softc, SK_XMAC_REG(sc, reg + 2), \ 1176 ((val) >> 16) & 0xFFFF) 1177 #else 1178 #define SK_XM_READ_4(sc, reg) \ 1179 sk_win_read_4(sc->sk_softc, SK_XMAC_REG(sc, reg)) 1180 1181 #define SK_XM_WRITE_4(sc, reg, val) \ 1182 sk_win_write_4(sc->sk_softc, SK_XMAC_REG(sc, reg), (val)) 1183 #endif 1184 1185 #define SK_XM_READ_2(sc, reg) \ 1186 sk_win_read_2(sc->sk_softc, SK_XMAC_REG(sc, reg)) 1187 1188 #define SK_XM_WRITE_2(sc, reg, val) \ 1189 sk_win_write_2(sc->sk_softc, SK_XMAC_REG(sc, reg), val) 1190 1191 #define SK_XM_SETBIT_4(sc, reg, x) \ 1192 SK_XM_WRITE_4(sc, reg, (SK_XM_READ_4(sc, reg)) | (x)) 1193 1194 #define SK_XM_CLRBIT_4(sc, reg, x) \ 1195 SK_XM_WRITE_4(sc, reg, (SK_XM_READ_4(sc, reg)) & ~(x)) 1196 1197 #define SK_XM_SETBIT_2(sc, reg, x) \ 1198 SK_XM_WRITE_2(sc, reg, (SK_XM_READ_2(sc, reg)) | (x)) 1199 1200 #define SK_XM_CLRBIT_2(sc, reg, x) \ 1201 SK_XM_WRITE_2(sc, reg, (SK_XM_READ_2(sc, reg)) & ~(x)) 1202 1203 /* Compute relative offset of an MARV register in the MARV window(s). */ 1204 #define SK_YU_REG(sc, reg) \ 1205 ((reg) + SK_MARV1_BASE + \ 1206 (((sc)->sk_port) * (SK_MARV2_BASE - SK_MARV1_BASE))) 1207 1208 #define SK_YU_READ_4(sc, reg) \ 1209 sk_win_read_4((sc)->sk_softc, SK_YU_REG((sc), (reg))) 1210 1211 #define SK_YU_READ_2(sc, reg) \ 1212 sk_win_read_2((sc)->sk_softc, SK_YU_REG((sc), (reg))) 1213 1214 #define SK_YU_WRITE_4(sc, reg, val) \ 1215 sk_win_write_4((sc)->sk_softc, SK_YU_REG((sc), (reg)), (val)) 1216 1217 #define SK_YU_WRITE_2(sc, reg, val) \ 1218 sk_win_write_2((sc)->sk_softc, SK_YU_REG((sc), (reg)), (val)) 1219 1220 #define SK_YU_SETBIT_4(sc, reg, x) \ 1221 SK_YU_WRITE_4(sc, reg, (SK_YU_READ_4(sc, reg)) | (x)) 1222 1223 #define SK_YU_CLRBIT_4(sc, reg, x) \ 1224 SK_YU_WRITE_4(sc, reg, (SK_YU_READ_4(sc, reg)) & ~(x)) 1225 1226 #define SK_YU_SETBIT_2(sc, reg, x) \ 1227 SK_YU_WRITE_2(sc, reg, (SK_YU_READ_2(sc, reg)) | (x)) 1228 1229 #define SK_YU_CLRBIT_2(sc, reg, x) \ 1230 SK_YU_WRITE_2(sc, reg, (SK_YU_READ_2(sc, reg)) & ~(x)) 1231 1232 /* 1233 * The default FIFO threshold on the XMAC II is 4 bytes. On 1234 * dual port NICs, this often leads to transmit underruns, so we 1235 * bump the threshold a little. 1236 */ 1237 #define SK_XM_TX_FIFOTHRESH 512 1238 1239 #define SK_PCI_VENDOR_ID 0x0000 1240 #define SK_PCI_DEVICE_ID 0x0002 1241 #define SK_PCI_COMMAND 0x0004 1242 #define SK_PCI_STATUS 0x0006 1243 #define SK_PCI_REVID 0x0008 1244 #define SK_PCI_CLASSCODE 0x0009 1245 #define SK_PCI_CACHELEN 0x000C 1246 #define SK_PCI_LATENCY_TIMER 0x000D 1247 #define SK_PCI_HEADER_TYPE 0x000E 1248 #define SK_PCI_LOMEM 0x0010 1249 #define SK_PCI_LOIO 0x0014 1250 #define SK_PCI_SUBVEN_ID 0x002C 1251 #define SK_PCI_SYBSYS_ID 0x002E 1252 #define SK_PCI_BIOSROM 0x0030 1253 #define SK_PCI_INTLINE 0x003C 1254 #define SK_PCI_INTPIN 0x003D 1255 #define SK_PCI_MINGNT 0x003E 1256 #define SK_PCI_MINLAT 0x003F 1257 1258 /* device specific PCI registers */ 1259 #define SK_PCI_OURREG1 0x0040 1260 #define SK_PCI_OURREG2 0x0044 1261 #define SK_PCI_CAPID 0x0048 /* 8 bits */ 1262 #define SK_PCI_NEXTPTR 0x0049 /* 8 bits */ 1263 #define SK_PCI_PWRMGMTCAP 0x004A /* 16 bits */ 1264 #define SK_PCI_PWRMGMTCTRL 0x004C /* 16 bits */ 1265 #define SK_PCI_PME_EVENT 0x004F 1266 1267 #define SK_PSTATE_MASK 0x0003 1268 #define SK_PSTATE_D0 0x0000 1269 #define SK_PSTATE_D1 0x0001 1270 #define SK_PSTATE_D2 0x0002 1271 #define SK_PSTATE_D3 0x0003 1272 #define SK_PME_EN 0x0010 1273 #define SK_PME_STATUS 0x8000 1274 1275 #define CSR_WRITE_4(sc, reg, val) \ 1276 bus_write_4((sc)->sk_res[0], (reg), (val)) 1277 #define CSR_WRITE_2(sc, reg, val) \ 1278 bus_write_2((sc)->sk_res[0], (reg), (val)) 1279 #define CSR_WRITE_1(sc, reg, val) \ 1280 bus_write_1((sc)->sk_res[0], (reg), (val)) 1281 1282 #define CSR_READ_4(sc, reg) \ 1283 bus_read_4((sc)->sk_res[0], (reg)) 1284 #define CSR_READ_2(sc, reg) \ 1285 bus_read_2((sc)->sk_res[0], (reg)) 1286 #define CSR_READ_1(sc, reg) \ 1287 bus_read_1((sc)->sk_res[0], (reg)) 1288 1289 struct sk_type { 1290 u_int16_t sk_vid; 1291 u_int16_t sk_did; 1292 const char *sk_name; 1293 }; 1294 1295 #define SK_ADDR_LO(x) ((u_int64_t) (x) & 0xffffffff) 1296 #define SK_ADDR_HI(x) ((u_int64_t) (x) >> 32) 1297 1298 #define SK_RING_ALIGN 64 1299 1300 /* RX queue descriptor data structure */ 1301 struct sk_rx_desc { 1302 u_int32_t sk_ctl; 1303 u_int32_t sk_next; 1304 u_int32_t sk_data_lo; 1305 u_int32_t sk_data_hi; 1306 u_int32_t sk_xmac_rxstat; 1307 u_int32_t sk_timestamp; 1308 u_int32_t sk_csum; 1309 u_int32_t sk_csum_start; 1310 }; 1311 1312 #define SK_OPCODE_DEFAULT 0x00550000 1313 #define SK_OPCODE_CSUM 0x00560000 1314 1315 #define SK_RXCTL_LEN 0x0000FFFF 1316 #define SK_RXCTL_OPCODE 0x00FF0000 1317 #define SK_RXCTL_TSTAMP_VALID 0x01000000 1318 #define SK_RXCTL_STATUS_VALID 0x02000000 1319 #define SK_RXCTL_DEV0 0x04000000 1320 #define SK_RXCTL_EOF_INTR 0x08000000 1321 #define SK_RXCTL_EOB_INTR 0x10000000 1322 #define SK_RXCTL_LASTFRAG 0x20000000 1323 #define SK_RXCTL_FIRSTFRAG 0x40000000 1324 #define SK_RXCTL_OWN 0x80000000 1325 1326 #define SK_RXSTAT \ 1327 (SK_RXCTL_EOF_INTR|SK_RXCTL_LASTFRAG|SK_RXCTL_FIRSTFRAG|SK_RXCTL_OWN) 1328 1329 struct sk_tx_desc { 1330 u_int32_t sk_ctl; 1331 u_int32_t sk_next; 1332 u_int32_t sk_data_lo; 1333 u_int32_t sk_data_hi; 1334 u_int32_t sk_xmac_txstat; 1335 u_int32_t sk_csum_startval; 1336 u_int32_t sk_csum_start; 1337 u_int32_t sk_rsvd1; 1338 }; 1339 1340 #define SK_TXCTL_LEN 0x0000FFFF 1341 #define SK_TXCTL_OPCODE 0x00FF0000 1342 #define SK_TXCTL_SW 0x01000000 1343 #define SK_TXCTL_NOCRC 0x02000000 1344 #define SK_TXCTL_STORENFWD 0x04000000 1345 #define SK_TXCTL_EOF_INTR 0x08000000 1346 #define SK_TXCTL_EOB_INTR 0x10000000 1347 #define SK_TXCTL_LASTFRAG 0x20000000 1348 #define SK_TXCTL_FIRSTFRAG 0x40000000 1349 #define SK_TXCTL_OWN 0x80000000 1350 1351 #define SK_TXSTAT \ 1352 (SK_OPCODE_DEFAULT|SK_TXCTL_EOF_INTR|SK_TXCTL_LASTFRAG|SK_TXCTL_OWN) 1353 1354 #define SK_RXBYTES(x) ((x) & 0x0000FFFF) 1355 #define SK_TXBYTES SK_RXBYTES 1356 1357 #define SK_TX_RING_CNT 512 1358 #define SK_RX_RING_CNT 256 1359 #define SK_JUMBO_RX_RING_CNT 256 1360 #define SK_MAXTXSEGS 32 1361 1362 #define SK_JUMBO_FRAMELEN 9018 1363 #define SK_JUMBO_MTU (SK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) 1364 #define SK_MAX_FRAMELEN \ 1365 (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN - ETHER_CRC_LEN) 1366 #define SK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 1367 1368 struct sk_txdesc { 1369 struct mbuf *tx_m; 1370 bus_dmamap_t tx_dmamap; 1371 STAILQ_ENTRY(sk_txdesc) tx_q; 1372 }; 1373 1374 STAILQ_HEAD(sk_txdq, sk_txdesc); 1375 1376 struct sk_rxdesc { 1377 struct mbuf *rx_m; 1378 bus_dmamap_t rx_dmamap; 1379 }; 1380 1381 struct sk_chain_data { 1382 bus_dma_tag_t sk_parent_tag; 1383 bus_dma_tag_t sk_tx_tag; 1384 struct sk_txdesc sk_txdesc[SK_TX_RING_CNT]; 1385 struct sk_txdq sk_txfreeq; 1386 struct sk_txdq sk_txbusyq; 1387 bus_dma_tag_t sk_rx_tag; 1388 struct sk_rxdesc sk_rxdesc[SK_RX_RING_CNT]; 1389 bus_dma_tag_t sk_tx_ring_tag; 1390 bus_dma_tag_t sk_rx_ring_tag; 1391 bus_dmamap_t sk_tx_ring_map; 1392 bus_dmamap_t sk_rx_ring_map; 1393 bus_dmamap_t sk_rx_sparemap; 1394 bus_dma_tag_t sk_jumbo_rx_tag; 1395 struct sk_rxdesc sk_jumbo_rxdesc[SK_JUMBO_RX_RING_CNT]; 1396 bus_dma_tag_t sk_jumbo_rx_ring_tag; 1397 bus_dmamap_t sk_jumbo_rx_ring_map; 1398 bus_dmamap_t sk_jumbo_rx_sparemap; 1399 int sk_tx_prod; 1400 int sk_tx_cons; 1401 int sk_tx_cnt; 1402 int sk_rx_cons; 1403 int sk_jumbo_rx_cons; 1404 }; 1405 1406 struct sk_ring_data { 1407 struct sk_tx_desc *sk_tx_ring; 1408 bus_addr_t sk_tx_ring_paddr; 1409 struct sk_rx_desc *sk_rx_ring; 1410 bus_addr_t sk_rx_ring_paddr; 1411 struct sk_rx_desc *sk_jumbo_rx_ring; 1412 bus_addr_t sk_jumbo_rx_ring_paddr; 1413 }; 1414 1415 #define SK_TX_RING_ADDR(sc, i) \ 1416 ((sc)->sk_rdata.sk_tx_ring_paddr + sizeof(struct sk_tx_desc) * (i)) 1417 #define SK_RX_RING_ADDR(sc, i) \ 1418 ((sc)->sk_rdata.sk_rx_ring_paddr + sizeof(struct sk_rx_desc) * (i)) 1419 #define SK_JUMBO_RX_RING_ADDR(sc, i) \ 1420 ((sc)->sk_rdata.sk_jumbo_rx_ring_paddr + sizeof(struct sk_rx_desc) * (i)) 1421 1422 #define SK_TX_RING_SZ \ 1423 (sizeof(struct sk_tx_desc) * SK_TX_RING_CNT) 1424 #define SK_RX_RING_SZ \ 1425 (sizeof(struct sk_rx_desc) * SK_RX_RING_CNT) 1426 #define SK_JUMBO_RX_RING_SZ \ 1427 (sizeof(struct sk_rx_desc) * SK_JUMBO_RX_RING_CNT) 1428 1429 struct sk_bcom_hack { 1430 int reg; 1431 int val; 1432 }; 1433 1434 #define SK_INC(x, y) (x) = (x + 1) % y 1435 1436 /* Forward decl. */ 1437 struct sk_if_softc; 1438 1439 /* Softc for the GEnesis controller. */ 1440 struct sk_softc { 1441 struct resource *sk_res[2]; /* I/O and IRQ resources */ 1442 struct resource_spec *sk_res_spec; 1443 void *sk_intrhand; /* irq handler handle */ 1444 device_t sk_dev; 1445 u_int8_t sk_type; 1446 u_int8_t sk_rev; 1447 u_int8_t spare; 1448 u_int32_t sk_rboff; /* RAMbuffer offset */ 1449 u_int32_t sk_ramsize; /* amount of RAM on NIC */ 1450 u_int32_t sk_pmd; /* physical media type */ 1451 u_int32_t sk_coppertype; 1452 u_int32_t sk_intrmask; 1453 int sk_int_mod; 1454 int sk_int_ticks; 1455 int sk_suspended; 1456 struct sk_if_softc *sk_if[2]; 1457 device_t sk_devs[2]; 1458 struct mtx sk_mii_mtx; 1459 struct mtx sk_mtx; 1460 }; 1461 1462 #define SK_LOCK(_sc) mtx_lock(&(_sc)->sk_mtx) 1463 #define SK_UNLOCK(_sc) mtx_unlock(&(_sc)->sk_mtx) 1464 #define SK_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sk_mtx, MA_OWNED) 1465 #define SK_IF_LOCK(_sc) SK_LOCK((_sc)->sk_softc) 1466 #define SK_IF_UNLOCK(_sc) SK_UNLOCK((_sc)->sk_softc) 1467 #define SK_IF_LOCK_ASSERT(_sc) SK_LOCK_ASSERT((_sc)->sk_softc) 1468 #define SK_IF_MII_LOCK(_sc) mtx_lock(&(_sc)->sk_softc->sk_mii_mtx) 1469 #define SK_IF_MII_UNLOCK(_sc) mtx_unlock(&(_sc)->sk_softc->sk_mii_mtx) 1470 1471 /* Softc for each logical interface */ 1472 struct sk_if_softc { 1473 struct ifnet *sk_ifp; /* interface info */ 1474 device_t sk_miibus; 1475 device_t sk_if_dev; 1476 u_int8_t sk_port; /* port # on controller */ 1477 u_int8_t sk_xmac_rev; /* XMAC chip rev (B2 or C1) */ 1478 u_int32_t sk_rx_ramstart; 1479 u_int32_t sk_rx_ramend; 1480 u_int32_t sk_tx_ramstart; 1481 u_int32_t sk_tx_ramend; 1482 int sk_phytype; 1483 int sk_phyaddr; 1484 int sk_link; 1485 struct callout sk_tick_ch; 1486 struct callout sk_watchdog_ch; 1487 int sk_watchdog_timer; 1488 struct sk_chain_data sk_cdata; 1489 struct sk_ring_data sk_rdata; 1490 struct sk_softc *sk_softc; /* parent controller */ 1491 int sk_tx_bmu; /* TX BMU register */ 1492 int sk_if_flags; 1493 int sk_jumbo_disable; 1494 }; 1495 1496 #define SK_TIMEOUT 1000 1497