1 /* 2 * Copyright (c) 1997, 1998, 1999, 2000 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 */ 34 35 /* 36 * SysKonnect SK-NET gigabit ethernet driver for FreeBSD. Supports 37 * the SK-984x series adapters, both single port and dual port. 38 * References: 39 * The XaQti XMAC II datasheet, 40 * http://www.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf 41 * The SysKonnect GEnesis manual, http://www.syskonnect.com 42 * 43 * Note: XaQti has been aquired by Vitesse, and Vitesse does not have the 44 * XMAC II datasheet online. I have put my copy at people.freebsd.org as a 45 * convenience to others until Vitesse corrects this problem: 46 * 47 * http://people.freebsd.org/~wpaul/SysKonnect/xmacii_datasheet_rev_c_9-29.pdf 48 * 49 * Written by Bill Paul <wpaul@ee.columbia.edu> 50 * Department of Electrical Engineering 51 * Columbia University, New York City 52 */ 53 54 /* 55 * The SysKonnect gigabit ethernet adapters consist of two main 56 * components: the SysKonnect GEnesis controller chip and the XaQti Corp. 57 * XMAC II gigabit ethernet MAC. The XMAC provides all of the MAC 58 * components and a PHY while the GEnesis controller provides a PCI 59 * interface with DMA support. Each card may have between 512K and 60 * 2MB of SRAM on board depending on the configuration. 61 * 62 * The SysKonnect GEnesis controller can have either one or two XMAC 63 * chips connected to it, allowing single or dual port NIC configurations. 64 * SysKonnect has the distinction of being the only vendor on the market 65 * with a dual port gigabit ethernet NIC. The GEnesis provides dual FIFOs, 66 * dual DMA queues, packet/MAC/transmit arbiters and direct access to the 67 * XMAC registers. This driver takes advantage of these features to allow 68 * both XMACs to operate as independent interfaces. 69 */ 70 71 #include <sys/param.h> 72 #include <sys/systm.h> 73 #include <sys/sockio.h> 74 #include <sys/mbuf.h> 75 #include <sys/malloc.h> 76 #include <sys/kernel.h> 77 #include <sys/socket.h> 78 #include <sys/queue.h> 79 80 #include <net/if.h> 81 #include <net/if_arp.h> 82 #include <net/ethernet.h> 83 #include <net/if_dl.h> 84 #include <net/if_media.h> 85 86 #include <net/bpf.h> 87 88 #include <vm/vm.h> /* for vtophys */ 89 #include <vm/pmap.h> /* for vtophys */ 90 #include <machine/bus_pio.h> 91 #include <machine/bus_memio.h> 92 #include <machine/bus.h> 93 #include <machine/resource.h> 94 #include <sys/bus.h> 95 #include <sys/rman.h> 96 97 #include <dev/mii/mii.h> 98 #include <dev/mii/miivar.h> 99 #include <dev/mii/brgphyreg.h> 100 101 #include <pci/pcireg.h> 102 #include <pci/pcivar.h> 103 104 #define SK_USEIOSPACE 105 106 #include <pci/if_skreg.h> 107 #include <pci/xmaciireg.h> 108 109 MODULE_DEPEND(sk, miibus, 1, 1, 1); 110 111 /* "controller miibus0" required. See GENERIC if you get errors here. */ 112 #include "miibus_if.h" 113 114 #ifndef lint 115 static const char rcsid[] = 116 "$FreeBSD$"; 117 #endif 118 119 static struct sk_type sk_devs[] = { 120 { SK_VENDORID, SK_DEVICEID_GE, "SysKonnect Gigabit Ethernet" }, 121 { 0, 0, NULL } 122 }; 123 124 static int sk_probe (device_t); 125 static int sk_attach (device_t); 126 static int sk_detach (device_t); 127 static int sk_detach_xmac (device_t); 128 static int sk_probe_xmac (device_t); 129 static int sk_attach_xmac (device_t); 130 static void sk_tick (void *); 131 static void sk_intr (void *); 132 static void sk_intr_xmac (struct sk_if_softc *); 133 static void sk_intr_bcom (struct sk_if_softc *); 134 static void sk_rxeof (struct sk_if_softc *); 135 static void sk_txeof (struct sk_if_softc *); 136 static int sk_encap (struct sk_if_softc *, struct mbuf *, 137 u_int32_t *); 138 static void sk_start (struct ifnet *); 139 static int sk_ioctl (struct ifnet *, u_long, caddr_t); 140 static void sk_init (void *); 141 static void sk_init_xmac (struct sk_if_softc *); 142 static void sk_stop (struct sk_if_softc *); 143 static void sk_watchdog (struct ifnet *); 144 static void sk_shutdown (device_t); 145 static int sk_ifmedia_upd (struct ifnet *); 146 static void sk_ifmedia_sts (struct ifnet *, struct ifmediareq *); 147 static void sk_reset (struct sk_softc *); 148 static int sk_newbuf (struct sk_if_softc *, 149 struct sk_chain *, struct mbuf *); 150 static int sk_alloc_jumbo_mem (struct sk_if_softc *); 151 static void *sk_jalloc (struct sk_if_softc *); 152 static void sk_jfree (caddr_t, void *); 153 static int sk_init_rx_ring (struct sk_if_softc *); 154 static void sk_init_tx_ring (struct sk_if_softc *); 155 static u_int32_t sk_win_read_4 (struct sk_softc *, int); 156 static u_int16_t sk_win_read_2 (struct sk_softc *, int); 157 static u_int8_t sk_win_read_1 (struct sk_softc *, int); 158 static void sk_win_write_4 (struct sk_softc *, int, u_int32_t); 159 static void sk_win_write_2 (struct sk_softc *, int, u_int32_t); 160 static void sk_win_write_1 (struct sk_softc *, int, u_int32_t); 161 static u_int8_t sk_vpd_readbyte (struct sk_softc *, int); 162 static void sk_vpd_read_res (struct sk_softc *, struct vpd_res *, int); 163 static void sk_vpd_read (struct sk_softc *); 164 165 static int sk_miibus_readreg (device_t, int, int); 166 static int sk_miibus_writereg (device_t, int, int, int); 167 static void sk_miibus_statchg (device_t); 168 169 static u_int32_t sk_calchash (caddr_t); 170 static void sk_setfilt (struct sk_if_softc *, caddr_t, int); 171 static void sk_setmulti (struct sk_if_softc *); 172 173 #ifdef SK_USEIOSPACE 174 #define SK_RES SYS_RES_IOPORT 175 #define SK_RID SK_PCI_LOIO 176 #else 177 #define SK_RES SYS_RES_MEMORY 178 #define SK_RID SK_PCI_LOMEM 179 #endif 180 181 /* 182 * Note that we have newbus methods for both the GEnesis controller 183 * itself and the XMAC(s). The XMACs are children of the GEnesis, and 184 * the miibus code is a child of the XMACs. We need to do it this way 185 * so that the miibus drivers can access the PHY registers on the 186 * right PHY. It's not quite what I had in mind, but it's the only 187 * design that achieves the desired effect. 188 */ 189 static device_method_t skc_methods[] = { 190 /* Device interface */ 191 DEVMETHOD(device_probe, sk_probe), 192 DEVMETHOD(device_attach, sk_attach), 193 DEVMETHOD(device_detach, sk_detach), 194 DEVMETHOD(device_shutdown, sk_shutdown), 195 196 /* bus interface */ 197 DEVMETHOD(bus_print_child, bus_generic_print_child), 198 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 199 200 { 0, 0 } 201 }; 202 203 static driver_t skc_driver = { 204 "skc", 205 skc_methods, 206 sizeof(struct sk_softc) 207 }; 208 209 static devclass_t skc_devclass; 210 211 static device_method_t sk_methods[] = { 212 /* Device interface */ 213 DEVMETHOD(device_probe, sk_probe_xmac), 214 DEVMETHOD(device_attach, sk_attach_xmac), 215 DEVMETHOD(device_detach, sk_detach_xmac), 216 DEVMETHOD(device_shutdown, bus_generic_shutdown), 217 218 /* bus interface */ 219 DEVMETHOD(bus_print_child, bus_generic_print_child), 220 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 221 222 /* MII interface */ 223 DEVMETHOD(miibus_readreg, sk_miibus_readreg), 224 DEVMETHOD(miibus_writereg, sk_miibus_writereg), 225 DEVMETHOD(miibus_statchg, sk_miibus_statchg), 226 227 { 0, 0 } 228 }; 229 230 static driver_t sk_driver = { 231 "sk", 232 sk_methods, 233 sizeof(struct sk_if_softc) 234 }; 235 236 static devclass_t sk_devclass; 237 238 DRIVER_MODULE(if_sk, pci, skc_driver, skc_devclass, 0, 0); 239 DRIVER_MODULE(sk, skc, sk_driver, sk_devclass, 0, 0); 240 DRIVER_MODULE(miibus, sk, miibus_driver, miibus_devclass, 0, 0); 241 242 #define SK_SETBIT(sc, reg, x) \ 243 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | x) 244 245 #define SK_CLRBIT(sc, reg, x) \ 246 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~x) 247 248 #define SK_WIN_SETBIT_4(sc, reg, x) \ 249 sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) | x) 250 251 #define SK_WIN_CLRBIT_4(sc, reg, x) \ 252 sk_win_write_4(sc, reg, sk_win_read_4(sc, reg) & ~x) 253 254 #define SK_WIN_SETBIT_2(sc, reg, x) \ 255 sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) | x) 256 257 #define SK_WIN_CLRBIT_2(sc, reg, x) \ 258 sk_win_write_2(sc, reg, sk_win_read_2(sc, reg) & ~x) 259 260 static u_int32_t sk_win_read_4(sc, reg) 261 struct sk_softc *sc; 262 int reg; 263 { 264 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 265 return(CSR_READ_4(sc, SK_WIN_BASE + SK_REG(reg))); 266 } 267 268 static u_int16_t sk_win_read_2(sc, reg) 269 struct sk_softc *sc; 270 int reg; 271 { 272 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 273 return(CSR_READ_2(sc, SK_WIN_BASE + SK_REG(reg))); 274 } 275 276 static u_int8_t sk_win_read_1(sc, reg) 277 struct sk_softc *sc; 278 int reg; 279 { 280 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 281 return(CSR_READ_1(sc, SK_WIN_BASE + SK_REG(reg))); 282 } 283 284 static void sk_win_write_4(sc, reg, val) 285 struct sk_softc *sc; 286 int reg; 287 u_int32_t val; 288 { 289 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 290 CSR_WRITE_4(sc, SK_WIN_BASE + SK_REG(reg), val); 291 return; 292 } 293 294 static void sk_win_write_2(sc, reg, val) 295 struct sk_softc *sc; 296 int reg; 297 u_int32_t val; 298 { 299 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 300 CSR_WRITE_2(sc, SK_WIN_BASE + SK_REG(reg), (u_int32_t)val); 301 return; 302 } 303 304 static void sk_win_write_1(sc, reg, val) 305 struct sk_softc *sc; 306 int reg; 307 u_int32_t val; 308 { 309 CSR_WRITE_4(sc, SK_RAP, SK_WIN(reg)); 310 CSR_WRITE_1(sc, SK_WIN_BASE + SK_REG(reg), val); 311 return; 312 } 313 314 /* 315 * The VPD EEPROM contains Vital Product Data, as suggested in 316 * the PCI 2.1 specification. The VPD data is separared into areas 317 * denoted by resource IDs. The SysKonnect VPD contains an ID string 318 * resource (the name of the adapter), a read-only area resource 319 * containing various key/data fields and a read/write area which 320 * can be used to store asset management information or log messages. 321 * We read the ID string and read-only into buffers attached to 322 * the controller softc structure for later use. At the moment, 323 * we only use the ID string during sk_attach(). 324 */ 325 static u_int8_t sk_vpd_readbyte(sc, addr) 326 struct sk_softc *sc; 327 int addr; 328 { 329 int i; 330 331 sk_win_write_2(sc, SK_PCI_REG(SK_PCI_VPD_ADDR), addr); 332 for (i = 0; i < SK_TIMEOUT; i++) { 333 DELAY(1); 334 if (sk_win_read_2(sc, 335 SK_PCI_REG(SK_PCI_VPD_ADDR)) & SK_VPD_FLAG) 336 break; 337 } 338 339 if (i == SK_TIMEOUT) 340 return(0); 341 342 return(sk_win_read_1(sc, SK_PCI_REG(SK_PCI_VPD_DATA))); 343 } 344 345 static void sk_vpd_read_res(sc, res, addr) 346 struct sk_softc *sc; 347 struct vpd_res *res; 348 int addr; 349 { 350 int i; 351 u_int8_t *ptr; 352 353 ptr = (u_int8_t *)res; 354 for (i = 0; i < sizeof(struct vpd_res); i++) 355 ptr[i] = sk_vpd_readbyte(sc, i + addr); 356 357 return; 358 } 359 360 static void sk_vpd_read(sc) 361 struct sk_softc *sc; 362 { 363 int pos = 0, i; 364 struct vpd_res res; 365 366 if (sc->sk_vpd_prodname != NULL) 367 free(sc->sk_vpd_prodname, M_DEVBUF); 368 if (sc->sk_vpd_readonly != NULL) 369 free(sc->sk_vpd_readonly, M_DEVBUF); 370 sc->sk_vpd_prodname = NULL; 371 sc->sk_vpd_readonly = NULL; 372 373 sk_vpd_read_res(sc, &res, pos); 374 375 if (res.vr_id != VPD_RES_ID) { 376 printf("skc%d: bad VPD resource id: expected %x got %x\n", 377 sc->sk_unit, VPD_RES_ID, res.vr_id); 378 return; 379 } 380 381 pos += sizeof(res); 382 sc->sk_vpd_prodname = malloc(res.vr_len + 1, M_DEVBUF, M_NOWAIT); 383 for (i = 0; i < res.vr_len; i++) 384 sc->sk_vpd_prodname[i] = sk_vpd_readbyte(sc, i + pos); 385 sc->sk_vpd_prodname[i] = '\0'; 386 pos += i; 387 388 sk_vpd_read_res(sc, &res, pos); 389 390 if (res.vr_id != VPD_RES_READ) { 391 printf("skc%d: bad VPD resource id: expected %x got %x\n", 392 sc->sk_unit, VPD_RES_READ, res.vr_id); 393 return; 394 } 395 396 pos += sizeof(res); 397 sc->sk_vpd_readonly = malloc(res.vr_len, M_DEVBUF, M_NOWAIT); 398 for (i = 0; i < res.vr_len + 1; i++) 399 sc->sk_vpd_readonly[i] = sk_vpd_readbyte(sc, i + pos); 400 401 return; 402 } 403 404 static int sk_miibus_readreg(dev, phy, reg) 405 device_t dev; 406 int phy, reg; 407 { 408 struct sk_if_softc *sc_if; 409 int i; 410 411 sc_if = device_get_softc(dev); 412 413 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC && phy != 0) 414 return(0); 415 416 SK_IF_LOCK(sc_if); 417 418 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); 419 SK_XM_READ_2(sc_if, XM_PHY_DATA); 420 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) { 421 for (i = 0; i < SK_TIMEOUT; i++) { 422 DELAY(1); 423 if (SK_XM_READ_2(sc_if, XM_MMUCMD) & 424 XM_MMUCMD_PHYDATARDY) 425 break; 426 } 427 428 if (i == SK_TIMEOUT) { 429 printf("sk%d: phy failed to come ready\n", 430 sc_if->sk_unit); 431 return(0); 432 } 433 } 434 DELAY(1); 435 i = SK_XM_READ_2(sc_if, XM_PHY_DATA); 436 SK_IF_UNLOCK(sc_if); 437 return(i); 438 } 439 440 static int sk_miibus_writereg(dev, phy, reg, val) 441 device_t dev; 442 int phy, reg, val; 443 { 444 struct sk_if_softc *sc_if; 445 int i; 446 447 sc_if = device_get_softc(dev); 448 SK_IF_LOCK(sc_if); 449 450 SK_XM_WRITE_2(sc_if, XM_PHY_ADDR, reg|(phy << 8)); 451 for (i = 0; i < SK_TIMEOUT; i++) { 452 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY)) 453 break; 454 } 455 456 if (i == SK_TIMEOUT) { 457 printf("sk%d: phy failed to come ready\n", sc_if->sk_unit); 458 return(ETIMEDOUT); 459 } 460 461 SK_XM_WRITE_2(sc_if, XM_PHY_DATA, val); 462 for (i = 0; i < SK_TIMEOUT; i++) { 463 DELAY(1); 464 if (!(SK_XM_READ_2(sc_if, XM_MMUCMD) & XM_MMUCMD_PHYBUSY)) 465 break; 466 } 467 468 SK_IF_UNLOCK(sc_if); 469 470 if (i == SK_TIMEOUT) 471 printf("sk%d: phy write timed out\n", sc_if->sk_unit); 472 473 return(0); 474 } 475 476 static void sk_miibus_statchg(dev) 477 device_t dev; 478 { 479 struct sk_if_softc *sc_if; 480 struct mii_data *mii; 481 482 sc_if = device_get_softc(dev); 483 mii = device_get_softc(sc_if->sk_miibus); 484 SK_IF_LOCK(sc_if); 485 /* 486 * If this is a GMII PHY, manually set the XMAC's 487 * duplex mode accordingly. 488 */ 489 if (sc_if->sk_phytype != SK_PHYTYPE_XMAC) { 490 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { 491 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX); 492 } else { 493 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_GMIIFDX); 494 } 495 } 496 SK_IF_UNLOCK(sc_if); 497 498 return; 499 } 500 501 #define SK_POLY 0xEDB88320 502 #define SK_BITS 6 503 504 static u_int32_t sk_calchash(addr) 505 caddr_t addr; 506 { 507 u_int32_t idx, bit, data, crc; 508 509 /* Compute CRC for the address value. */ 510 crc = 0xFFFFFFFF; /* initial value */ 511 512 for (idx = 0; idx < 6; idx++) { 513 for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1) 514 crc = (crc >> 1) ^ (((crc ^ data) & 1) ? SK_POLY : 0); 515 } 516 517 return (~crc & ((1 << SK_BITS) - 1)); 518 } 519 520 static void sk_setfilt(sc_if, addr, slot) 521 struct sk_if_softc *sc_if; 522 caddr_t addr; 523 int slot; 524 { 525 int base; 526 527 base = XM_RXFILT_ENTRY(slot); 528 529 SK_XM_WRITE_2(sc_if, base, *(u_int16_t *)(&addr[0])); 530 SK_XM_WRITE_2(sc_if, base + 2, *(u_int16_t *)(&addr[2])); 531 SK_XM_WRITE_2(sc_if, base + 4, *(u_int16_t *)(&addr[4])); 532 533 return; 534 } 535 536 static void sk_setmulti(sc_if) 537 struct sk_if_softc *sc_if; 538 { 539 struct ifnet *ifp; 540 u_int32_t hashes[2] = { 0, 0 }; 541 int h, i; 542 struct ifmultiaddr *ifma; 543 u_int8_t dummy[] = { 0, 0, 0, 0, 0 ,0 }; 544 545 ifp = &sc_if->arpcom.ac_if; 546 547 /* First, zot all the existing filters. */ 548 for (i = 1; i < XM_RXFILT_MAX; i++) 549 sk_setfilt(sc_if, (caddr_t)&dummy, i); 550 SK_XM_WRITE_4(sc_if, XM_MAR0, 0); 551 SK_XM_WRITE_4(sc_if, XM_MAR2, 0); 552 553 /* Now program new ones. */ 554 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 555 hashes[0] = 0xFFFFFFFF; 556 hashes[1] = 0xFFFFFFFF; 557 } else { 558 i = 1; 559 TAILQ_FOREACH_REVERSE(ifma, &ifp->if_multiaddrs, ifmultihead, ifma_link) { 560 if (ifma->ifma_addr->sa_family != AF_LINK) 561 continue; 562 /* 563 * Program the first XM_RXFILT_MAX multicast groups 564 * into the perfect filter. For all others, 565 * use the hash table. 566 */ 567 if (i < XM_RXFILT_MAX) { 568 sk_setfilt(sc_if, 569 LLADDR((struct sockaddr_dl *)ifma->ifma_addr), i); 570 i++; 571 continue; 572 } 573 574 h = sk_calchash( 575 LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); 576 if (h < 32) 577 hashes[0] |= (1 << h); 578 else 579 hashes[1] |= (1 << (h - 32)); 580 } 581 } 582 583 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_HASH| 584 XM_MODE_RX_USE_PERFECT); 585 SK_XM_WRITE_4(sc_if, XM_MAR0, hashes[0]); 586 SK_XM_WRITE_4(sc_if, XM_MAR2, hashes[1]); 587 588 return; 589 } 590 591 static int sk_init_rx_ring(sc_if) 592 struct sk_if_softc *sc_if; 593 { 594 struct sk_chain_data *cd; 595 struct sk_ring_data *rd; 596 int i; 597 598 cd = &sc_if->sk_cdata; 599 rd = sc_if->sk_rdata; 600 601 bzero((char *)rd->sk_rx_ring, 602 sizeof(struct sk_rx_desc) * SK_RX_RING_CNT); 603 604 for (i = 0; i < SK_RX_RING_CNT; i++) { 605 cd->sk_rx_chain[i].sk_desc = &rd->sk_rx_ring[i]; 606 if (sk_newbuf(sc_if, &cd->sk_rx_chain[i], NULL) == ENOBUFS) 607 return(ENOBUFS); 608 if (i == (SK_RX_RING_CNT - 1)) { 609 cd->sk_rx_chain[i].sk_next = 610 &cd->sk_rx_chain[0]; 611 rd->sk_rx_ring[i].sk_next = 612 vtophys(&rd->sk_rx_ring[0]); 613 } else { 614 cd->sk_rx_chain[i].sk_next = 615 &cd->sk_rx_chain[i + 1]; 616 rd->sk_rx_ring[i].sk_next = 617 vtophys(&rd->sk_rx_ring[i + 1]); 618 } 619 } 620 621 sc_if->sk_cdata.sk_rx_prod = 0; 622 sc_if->sk_cdata.sk_rx_cons = 0; 623 624 return(0); 625 } 626 627 static void sk_init_tx_ring(sc_if) 628 struct sk_if_softc *sc_if; 629 { 630 struct sk_chain_data *cd; 631 struct sk_ring_data *rd; 632 int i; 633 634 cd = &sc_if->sk_cdata; 635 rd = sc_if->sk_rdata; 636 637 bzero((char *)sc_if->sk_rdata->sk_tx_ring, 638 sizeof(struct sk_tx_desc) * SK_TX_RING_CNT); 639 640 for (i = 0; i < SK_TX_RING_CNT; i++) { 641 cd->sk_tx_chain[i].sk_desc = &rd->sk_tx_ring[i]; 642 if (i == (SK_TX_RING_CNT - 1)) { 643 cd->sk_tx_chain[i].sk_next = 644 &cd->sk_tx_chain[0]; 645 rd->sk_tx_ring[i].sk_next = 646 vtophys(&rd->sk_tx_ring[0]); 647 } else { 648 cd->sk_tx_chain[i].sk_next = 649 &cd->sk_tx_chain[i + 1]; 650 rd->sk_tx_ring[i].sk_next = 651 vtophys(&rd->sk_tx_ring[i + 1]); 652 } 653 } 654 655 sc_if->sk_cdata.sk_tx_prod = 0; 656 sc_if->sk_cdata.sk_tx_cons = 0; 657 sc_if->sk_cdata.sk_tx_cnt = 0; 658 659 return; 660 } 661 662 static int sk_newbuf(sc_if, c, m) 663 struct sk_if_softc *sc_if; 664 struct sk_chain *c; 665 struct mbuf *m; 666 { 667 struct mbuf *m_new = NULL; 668 struct sk_rx_desc *r; 669 670 if (m == NULL) { 671 caddr_t *buf = NULL; 672 673 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 674 if (m_new == NULL) 675 return(ENOBUFS); 676 677 /* Allocate the jumbo buffer */ 678 buf = sk_jalloc(sc_if); 679 if (buf == NULL) { 680 m_freem(m_new); 681 #ifdef SK_VERBOSE 682 printf("sk%d: jumbo allocation failed " 683 "-- packet dropped!\n", sc_if->sk_unit); 684 #endif 685 return(ENOBUFS); 686 } 687 688 /* Attach the buffer to the mbuf */ 689 MEXTADD(m_new, buf, SK_JLEN, sk_jfree, 690 (struct sk_if_softc *)sc_if, 0, EXT_NET_DRV); 691 m_new->m_data = (void *)buf; 692 m_new->m_pkthdr.len = m_new->m_len = SK_JLEN; 693 } else { 694 /* 695 * We're re-using a previously allocated mbuf; 696 * be sure to re-init pointers and lengths to 697 * default values. 698 */ 699 m_new = m; 700 m_new->m_len = m_new->m_pkthdr.len = SK_JLEN; 701 m_new->m_data = m_new->m_ext.ext_buf; 702 } 703 704 /* 705 * Adjust alignment so packet payload begins on a 706 * longword boundary. Mandatory for Alpha, useful on 707 * x86 too. 708 */ 709 m_adj(m_new, ETHER_ALIGN); 710 711 r = c->sk_desc; 712 c->sk_mbuf = m_new; 713 r->sk_data_lo = vtophys(mtod(m_new, caddr_t)); 714 r->sk_ctl = m_new->m_len | SK_RXSTAT; 715 716 return(0); 717 } 718 719 /* 720 * Allocate jumbo buffer storage. The SysKonnect adapters support 721 * "jumbograms" (9K frames), although SysKonnect doesn't currently 722 * use them in their drivers. In order for us to use them, we need 723 * large 9K receive buffers, however standard mbuf clusters are only 724 * 2048 bytes in size. Consequently, we need to allocate and manage 725 * our own jumbo buffer pool. Fortunately, this does not require an 726 * excessive amount of additional code. 727 */ 728 static int sk_alloc_jumbo_mem(sc_if) 729 struct sk_if_softc *sc_if; 730 { 731 caddr_t ptr; 732 register int i; 733 struct sk_jpool_entry *entry; 734 735 /* Grab a big chunk o' storage. */ 736 sc_if->sk_cdata.sk_jumbo_buf = contigmalloc(SK_JMEM, M_DEVBUF, 737 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); 738 739 if (sc_if->sk_cdata.sk_jumbo_buf == NULL) { 740 printf("sk%d: no memory for jumbo buffers!\n", sc_if->sk_unit); 741 return(ENOBUFS); 742 } 743 744 SLIST_INIT(&sc_if->sk_jfree_listhead); 745 SLIST_INIT(&sc_if->sk_jinuse_listhead); 746 747 /* 748 * Now divide it up into 9K pieces and save the addresses 749 * in an array. 750 */ 751 ptr = sc_if->sk_cdata.sk_jumbo_buf; 752 for (i = 0; i < SK_JSLOTS; i++) { 753 sc_if->sk_cdata.sk_jslots[i] = ptr; 754 ptr += SK_JLEN; 755 entry = malloc(sizeof(struct sk_jpool_entry), 756 M_DEVBUF, M_NOWAIT); 757 if (entry == NULL) { 758 free(sc_if->sk_cdata.sk_jumbo_buf, M_DEVBUF); 759 sc_if->sk_cdata.sk_jumbo_buf = NULL; 760 printf("sk%d: no memory for jumbo " 761 "buffer queue!\n", sc_if->sk_unit); 762 return(ENOBUFS); 763 } 764 entry->slot = i; 765 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead, 766 entry, jpool_entries); 767 } 768 769 return(0); 770 } 771 772 /* 773 * Allocate a jumbo buffer. 774 */ 775 static void *sk_jalloc(sc_if) 776 struct sk_if_softc *sc_if; 777 { 778 struct sk_jpool_entry *entry; 779 780 entry = SLIST_FIRST(&sc_if->sk_jfree_listhead); 781 782 if (entry == NULL) { 783 #ifdef SK_VERBOSE 784 printf("sk%d: no free jumbo buffers\n", sc_if->sk_unit); 785 #endif 786 return(NULL); 787 } 788 789 SLIST_REMOVE_HEAD(&sc_if->sk_jfree_listhead, jpool_entries); 790 SLIST_INSERT_HEAD(&sc_if->sk_jinuse_listhead, entry, jpool_entries); 791 return(sc_if->sk_cdata.sk_jslots[entry->slot]); 792 } 793 794 /* 795 * Release a jumbo buffer. 796 */ 797 static void sk_jfree(buf, args) 798 caddr_t buf; 799 void *args; 800 { 801 struct sk_if_softc *sc_if; 802 int i; 803 struct sk_jpool_entry *entry; 804 805 /* Extract the softc struct pointer. */ 806 sc_if = (struct sk_if_softc *)args; 807 808 if (sc_if == NULL) 809 panic("sk_jfree: didn't get softc pointer!"); 810 811 /* calculate the slot this buffer belongs to */ 812 i = ((vm_offset_t)buf 813 - (vm_offset_t)sc_if->sk_cdata.sk_jumbo_buf) / SK_JLEN; 814 815 if ((i < 0) || (i >= SK_JSLOTS)) 816 panic("sk_jfree: asked to free buffer that we don't manage!"); 817 818 entry = SLIST_FIRST(&sc_if->sk_jinuse_listhead); 819 if (entry == NULL) 820 panic("sk_jfree: buffer not in use!"); 821 entry->slot = i; 822 SLIST_REMOVE_HEAD(&sc_if->sk_jinuse_listhead, jpool_entries); 823 SLIST_INSERT_HEAD(&sc_if->sk_jfree_listhead, entry, jpool_entries); 824 825 return; 826 } 827 828 /* 829 * Set media options. 830 */ 831 static int sk_ifmedia_upd(ifp) 832 struct ifnet *ifp; 833 { 834 struct sk_if_softc *sc_if; 835 struct mii_data *mii; 836 837 sc_if = ifp->if_softc; 838 mii = device_get_softc(sc_if->sk_miibus); 839 sk_init(sc_if); 840 mii_mediachg(mii); 841 842 return(0); 843 } 844 845 /* 846 * Report current media status. 847 */ 848 static void sk_ifmedia_sts(ifp, ifmr) 849 struct ifnet *ifp; 850 struct ifmediareq *ifmr; 851 { 852 struct sk_if_softc *sc_if; 853 struct mii_data *mii; 854 855 sc_if = ifp->if_softc; 856 mii = device_get_softc(sc_if->sk_miibus); 857 858 mii_pollstat(mii); 859 ifmr->ifm_active = mii->mii_media_active; 860 ifmr->ifm_status = mii->mii_media_status; 861 862 return; 863 } 864 865 static int sk_ioctl(ifp, command, data) 866 struct ifnet *ifp; 867 u_long command; 868 caddr_t data; 869 { 870 struct sk_if_softc *sc_if = ifp->if_softc; 871 struct ifreq *ifr = (struct ifreq *) data; 872 int error = 0; 873 struct mii_data *mii; 874 875 SK_IF_LOCK(sc_if); 876 877 switch(command) { 878 case SIOCSIFADDR: 879 case SIOCGIFADDR: 880 error = ether_ioctl(ifp, command, data); 881 break; 882 case SIOCSIFMTU: 883 if (ifr->ifr_mtu > SK_JUMBO_MTU) 884 error = EINVAL; 885 else { 886 ifp->if_mtu = ifr->ifr_mtu; 887 sk_init(sc_if); 888 } 889 break; 890 case SIOCSIFFLAGS: 891 if (ifp->if_flags & IFF_UP) { 892 if (ifp->if_flags & IFF_RUNNING && 893 ifp->if_flags & IFF_PROMISC && 894 !(sc_if->sk_if_flags & IFF_PROMISC)) { 895 SK_XM_SETBIT_4(sc_if, XM_MODE, 896 XM_MODE_RX_PROMISC); 897 sk_setmulti(sc_if); 898 } else if (ifp->if_flags & IFF_RUNNING && 899 !(ifp->if_flags & IFF_PROMISC) && 900 sc_if->sk_if_flags & IFF_PROMISC) { 901 SK_XM_CLRBIT_4(sc_if, XM_MODE, 902 XM_MODE_RX_PROMISC); 903 sk_setmulti(sc_if); 904 } else 905 sk_init(sc_if); 906 } else { 907 if (ifp->if_flags & IFF_RUNNING) 908 sk_stop(sc_if); 909 } 910 sc_if->sk_if_flags = ifp->if_flags; 911 error = 0; 912 break; 913 case SIOCADDMULTI: 914 case SIOCDELMULTI: 915 sk_setmulti(sc_if); 916 error = 0; 917 break; 918 case SIOCGIFMEDIA: 919 case SIOCSIFMEDIA: 920 mii = device_get_softc(sc_if->sk_miibus); 921 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 922 break; 923 default: 924 error = EINVAL; 925 break; 926 } 927 928 SK_IF_UNLOCK(sc_if); 929 930 return(error); 931 } 932 933 /* 934 * Probe for a SysKonnect GEnesis chip. Check the PCI vendor and device 935 * IDs against our list and return a device name if we find a match. 936 */ 937 static int sk_probe(dev) 938 device_t dev; 939 { 940 struct sk_type *t; 941 942 t = sk_devs; 943 944 while(t->sk_name != NULL) { 945 if ((pci_get_vendor(dev) == t->sk_vid) && 946 (pci_get_device(dev) == t->sk_did)) { 947 device_set_desc(dev, t->sk_name); 948 return(0); 949 } 950 t++; 951 } 952 953 return(ENXIO); 954 } 955 956 /* 957 * Force the GEnesis into reset, then bring it out of reset. 958 */ 959 static void sk_reset(sc) 960 struct sk_softc *sc; 961 { 962 CSR_WRITE_4(sc, SK_CSR, SK_CSR_SW_RESET); 963 CSR_WRITE_4(sc, SK_CSR, SK_CSR_MASTER_RESET); 964 DELAY(1000); 965 CSR_WRITE_4(sc, SK_CSR, SK_CSR_SW_UNRESET); 966 CSR_WRITE_4(sc, SK_CSR, SK_CSR_MASTER_UNRESET); 967 968 /* Configure packet arbiter */ 969 sk_win_write_2(sc, SK_PKTARB_CTL, SK_PKTARBCTL_UNRESET); 970 sk_win_write_2(sc, SK_RXPA1_TINIT, SK_PKTARB_TIMEOUT); 971 sk_win_write_2(sc, SK_TXPA1_TINIT, SK_PKTARB_TIMEOUT); 972 sk_win_write_2(sc, SK_RXPA2_TINIT, SK_PKTARB_TIMEOUT); 973 sk_win_write_2(sc, SK_TXPA2_TINIT, SK_PKTARB_TIMEOUT); 974 975 /* Enable RAM interface */ 976 sk_win_write_4(sc, SK_RAMCTL, SK_RAMCTL_UNRESET); 977 978 /* 979 * Configure interrupt moderation. The moderation timer 980 * defers interrupts specified in the interrupt moderation 981 * timer mask based on the timeout specified in the interrupt 982 * moderation timer init register. Each bit in the timer 983 * register represents 18.825ns, so to specify a timeout in 984 * microseconds, we have to multiply by 54. 985 */ 986 sk_win_write_4(sc, SK_IMTIMERINIT, SK_IM_USECS(200)); 987 sk_win_write_4(sc, SK_IMMR, SK_ISR_TX1_S_EOF|SK_ISR_TX2_S_EOF| 988 SK_ISR_RX1_EOF|SK_ISR_RX2_EOF); 989 sk_win_write_1(sc, SK_IMTIMERCTL, SK_IMCTL_START); 990 991 return; 992 } 993 994 static int sk_probe_xmac(dev) 995 device_t dev; 996 { 997 /* 998 * Not much to do here. We always know there will be 999 * at least one XMAC present, and if there are two, 1000 * sk_attach() will create a second device instance 1001 * for us. 1002 */ 1003 device_set_desc(dev, "XaQti Corp. XMAC II"); 1004 1005 return(0); 1006 } 1007 1008 /* 1009 * Each XMAC chip is attached as a separate logical IP interface. 1010 * Single port cards will have only one logical interface of course. 1011 */ 1012 static int sk_attach_xmac(dev) 1013 device_t dev; 1014 { 1015 struct sk_softc *sc; 1016 struct sk_if_softc *sc_if; 1017 struct ifnet *ifp; 1018 int i, port; 1019 1020 if (dev == NULL) 1021 return(EINVAL); 1022 1023 sc_if = device_get_softc(dev); 1024 sc = device_get_softc(device_get_parent(dev)); 1025 SK_LOCK(sc); 1026 port = *(int *)device_get_ivars(dev); 1027 free(device_get_ivars(dev), M_DEVBUF); 1028 device_set_ivars(dev, NULL); 1029 sc_if->sk_dev = dev; 1030 1031 bzero((char *)sc_if, sizeof(struct sk_if_softc)); 1032 1033 sc_if->sk_dev = dev; 1034 sc_if->sk_unit = device_get_unit(dev); 1035 sc_if->sk_port = port; 1036 sc_if->sk_softc = sc; 1037 sc->sk_if[port] = sc_if; 1038 if (port == SK_PORT_A) 1039 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR0; 1040 if (port == SK_PORT_B) 1041 sc_if->sk_tx_bmu = SK_BMU_TXS_CSR1; 1042 1043 /* 1044 * Get station address for this interface. Note that 1045 * dual port cards actually come with three station 1046 * addresses: one for each port, plus an extra. The 1047 * extra one is used by the SysKonnect driver software 1048 * as a 'virtual' station address for when both ports 1049 * are operating in failover mode. Currently we don't 1050 * use this extra address. 1051 */ 1052 for (i = 0; i < ETHER_ADDR_LEN; i++) 1053 sc_if->arpcom.ac_enaddr[i] = 1054 sk_win_read_1(sc, SK_MAC0_0 + (port * 8) + i); 1055 1056 printf("sk%d: Ethernet address: %6D\n", 1057 sc_if->sk_unit, sc_if->arpcom.ac_enaddr, ":"); 1058 1059 /* 1060 * Set up RAM buffer addresses. The NIC will have a certain 1061 * amount of SRAM on it, somewhere between 512K and 2MB. We 1062 * need to divide this up a) between the transmitter and 1063 * receiver and b) between the two XMACs, if this is a 1064 * dual port NIC. Our algotithm is to divide up the memory 1065 * evenly so that everyone gets a fair share. 1066 */ 1067 if (sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC) { 1068 u_int32_t chunk, val; 1069 1070 chunk = sc->sk_ramsize / 2; 1071 val = sc->sk_rboff / sizeof(u_int64_t); 1072 sc_if->sk_rx_ramstart = val; 1073 val += (chunk / sizeof(u_int64_t)); 1074 sc_if->sk_rx_ramend = val - 1; 1075 sc_if->sk_tx_ramstart = val; 1076 val += (chunk / sizeof(u_int64_t)); 1077 sc_if->sk_tx_ramend = val - 1; 1078 } else { 1079 u_int32_t chunk, val; 1080 1081 chunk = sc->sk_ramsize / 4; 1082 val = (sc->sk_rboff + (chunk * 2 * sc_if->sk_port)) / 1083 sizeof(u_int64_t); 1084 sc_if->sk_rx_ramstart = val; 1085 val += (chunk / sizeof(u_int64_t)); 1086 sc_if->sk_rx_ramend = val - 1; 1087 sc_if->sk_tx_ramstart = val; 1088 val += (chunk / sizeof(u_int64_t)); 1089 sc_if->sk_tx_ramend = val - 1; 1090 } 1091 1092 /* Read and save PHY type and set PHY address */ 1093 sc_if->sk_phytype = sk_win_read_1(sc, SK_EPROM1) & 0xF; 1094 switch(sc_if->sk_phytype) { 1095 case SK_PHYTYPE_XMAC: 1096 sc_if->sk_phyaddr = SK_PHYADDR_XMAC; 1097 break; 1098 case SK_PHYTYPE_BCOM: 1099 sc_if->sk_phyaddr = SK_PHYADDR_BCOM; 1100 break; 1101 default: 1102 printf("skc%d: unsupported PHY type: %d\n", 1103 sc->sk_unit, sc_if->sk_phytype); 1104 SK_UNLOCK(sc); 1105 return(ENODEV); 1106 } 1107 1108 /* Allocate the descriptor queues. */ 1109 sc_if->sk_rdata = contigmalloc(sizeof(struct sk_ring_data), M_DEVBUF, 1110 M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); 1111 1112 if (sc_if->sk_rdata == NULL) { 1113 printf("sk%d: no memory for list buffers!\n", sc_if->sk_unit); 1114 sc->sk_if[port] = NULL; 1115 SK_UNLOCK(sc); 1116 return(ENOMEM); 1117 } 1118 1119 bzero(sc_if->sk_rdata, sizeof(struct sk_ring_data)); 1120 1121 /* Try to allocate memory for jumbo buffers. */ 1122 if (sk_alloc_jumbo_mem(sc_if)) { 1123 printf("sk%d: jumbo buffer allocation failed\n", 1124 sc_if->sk_unit); 1125 contigfree(sc_if->sk_rdata, 1126 sizeof(struct sk_ring_data), M_DEVBUF); 1127 sc->sk_if[port] = NULL; 1128 SK_UNLOCK(sc); 1129 return(ENOMEM); 1130 } 1131 1132 ifp = &sc_if->arpcom.ac_if; 1133 ifp->if_softc = sc_if; 1134 ifp->if_unit = sc_if->sk_unit; 1135 ifp->if_name = "sk"; 1136 ifp->if_mtu = ETHERMTU; 1137 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1138 ifp->if_ioctl = sk_ioctl; 1139 ifp->if_output = ether_output; 1140 ifp->if_start = sk_start; 1141 ifp->if_watchdog = sk_watchdog; 1142 ifp->if_init = sk_init; 1143 ifp->if_baudrate = 1000000000; 1144 ifp->if_snd.ifq_maxlen = SK_TX_RING_CNT - 1; 1145 1146 /* 1147 * Call MI attach routine. 1148 */ 1149 ether_ifattach(ifp, ETHER_BPF_SUPPORTED); 1150 callout_handle_init(&sc_if->sk_tick_ch); 1151 1152 /* 1153 * Do miibus setup. 1154 */ 1155 sk_init_xmac(sc_if); 1156 if (mii_phy_probe(dev, &sc_if->sk_miibus, 1157 sk_ifmedia_upd, sk_ifmedia_sts)) { 1158 printf("skc%d: no PHY found!\n", sc_if->sk_unit); 1159 contigfree(sc_if->sk_rdata, 1160 sizeof(struct sk_ring_data), M_DEVBUF); 1161 ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); 1162 SK_UNLOCK(sc); 1163 return(ENXIO); 1164 } 1165 1166 SK_UNLOCK(sc); 1167 1168 return(0); 1169 } 1170 1171 /* 1172 * Attach the interface. Allocate softc structures, do ifmedia 1173 * setup and ethernet/BPF attach. 1174 */ 1175 static int sk_attach(dev) 1176 device_t dev; 1177 { 1178 u_int32_t command; 1179 struct sk_softc *sc; 1180 int unit, error = 0, rid, *port; 1181 1182 sc = device_get_softc(dev); 1183 unit = device_get_unit(dev); 1184 bzero(sc, sizeof(struct sk_softc)); 1185 1186 mtx_init(&sc->sk_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 1187 MTX_DEF | MTX_RECURSE); 1188 SK_LOCK(sc); 1189 1190 /* 1191 * Handle power management nonsense. 1192 */ 1193 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { 1194 u_int32_t iobase, membase, irq; 1195 1196 /* Save important PCI config data. */ 1197 iobase = pci_read_config(dev, SK_PCI_LOIO, 4); 1198 membase = pci_read_config(dev, SK_PCI_LOMEM, 4); 1199 irq = pci_read_config(dev, SK_PCI_INTLINE, 4); 1200 1201 /* Reset the power state. */ 1202 printf("skc%d: chip is in D%d power mode " 1203 "-- setting to D0\n", unit, 1204 pci_get_powerstate(dev)); 1205 pci_set_powerstate(dev, PCI_POWERSTATE_D0); 1206 1207 /* Restore PCI config data. */ 1208 pci_write_config(dev, SK_PCI_LOIO, iobase, 4); 1209 pci_write_config(dev, SK_PCI_LOMEM, membase, 4); 1210 pci_write_config(dev, SK_PCI_INTLINE, irq, 4); 1211 } 1212 1213 /* 1214 * Map control/status registers. 1215 */ 1216 pci_enable_busmaster(dev); 1217 pci_enable_io(dev, SYS_RES_IOPORT); 1218 pci_enable_io(dev, SYS_RES_MEMORY); 1219 command = pci_read_config(dev, PCIR_COMMAND, 4); 1220 1221 #ifdef SK_USEIOSPACE 1222 if (!(command & PCIM_CMD_PORTEN)) { 1223 printf("skc%d: failed to enable I/O ports!\n", unit); 1224 error = ENXIO; 1225 goto fail; 1226 } 1227 #else 1228 if (!(command & PCIM_CMD_MEMEN)) { 1229 printf("skc%d: failed to enable memory mapping!\n", unit); 1230 error = ENXIO; 1231 goto fail; 1232 } 1233 #endif 1234 1235 rid = SK_RID; 1236 sc->sk_res = bus_alloc_resource(dev, SK_RES, &rid, 1237 0, ~0, 1, RF_ACTIVE); 1238 1239 if (sc->sk_res == NULL) { 1240 printf("sk%d: couldn't map ports/memory\n", unit); 1241 error = ENXIO; 1242 goto fail; 1243 } 1244 1245 sc->sk_btag = rman_get_bustag(sc->sk_res); 1246 sc->sk_bhandle = rman_get_bushandle(sc->sk_res); 1247 1248 /* Allocate interrupt */ 1249 rid = 0; 1250 sc->sk_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, 1251 RF_SHAREABLE | RF_ACTIVE); 1252 1253 if (sc->sk_irq == NULL) { 1254 printf("skc%d: couldn't map interrupt\n", unit); 1255 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1256 error = ENXIO; 1257 goto fail; 1258 } 1259 1260 error = bus_setup_intr(dev, sc->sk_irq, INTR_TYPE_NET, 1261 sk_intr, sc, &sc->sk_intrhand); 1262 1263 if (error) { 1264 printf("skc%d: couldn't set up irq\n", unit); 1265 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1266 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1267 goto fail; 1268 } 1269 1270 /* Reset the adapter. */ 1271 sk_reset(sc); 1272 1273 sc->sk_unit = unit; 1274 1275 /* Read and save vital product data from EEPROM. */ 1276 sk_vpd_read(sc); 1277 1278 /* Read and save RAM size and RAMbuffer offset */ 1279 switch(sk_win_read_1(sc, SK_EPROM0)) { 1280 case SK_RAMSIZE_512K_64: 1281 sc->sk_ramsize = 0x80000; 1282 sc->sk_rboff = SK_RBOFF_0; 1283 break; 1284 case SK_RAMSIZE_1024K_64: 1285 sc->sk_ramsize = 0x100000; 1286 sc->sk_rboff = SK_RBOFF_80000; 1287 break; 1288 case SK_RAMSIZE_1024K_128: 1289 sc->sk_ramsize = 0x100000; 1290 sc->sk_rboff = SK_RBOFF_0; 1291 break; 1292 case SK_RAMSIZE_2048K_128: 1293 sc->sk_ramsize = 0x200000; 1294 sc->sk_rboff = SK_RBOFF_0; 1295 break; 1296 default: 1297 printf("skc%d: unknown ram size: %d\n", 1298 sc->sk_unit, sk_win_read_1(sc, SK_EPROM0)); 1299 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand); 1300 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1301 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1302 error = ENXIO; 1303 goto fail; 1304 break; 1305 } 1306 1307 /* Read and save physical media type */ 1308 switch(sk_win_read_1(sc, SK_PMDTYPE)) { 1309 case SK_PMD_1000BASESX: 1310 sc->sk_pmd = IFM_1000_SX; 1311 break; 1312 case SK_PMD_1000BASELX: 1313 sc->sk_pmd = IFM_1000_LX; 1314 break; 1315 case SK_PMD_1000BASECX: 1316 sc->sk_pmd = IFM_1000_CX; 1317 break; 1318 case SK_PMD_1000BASETX: 1319 sc->sk_pmd = IFM_1000_T; 1320 break; 1321 default: 1322 printf("skc%d: unknown media type: 0x%x\n", 1323 sc->sk_unit, sk_win_read_1(sc, SK_PMDTYPE)); 1324 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand); 1325 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1326 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1327 error = ENXIO; 1328 goto fail; 1329 } 1330 1331 /* Announce the product name. */ 1332 printf("skc%d: %s\n", sc->sk_unit, sc->sk_vpd_prodname); 1333 sc->sk_devs[SK_PORT_A] = device_add_child(dev, "sk", -1); 1334 port = malloc(sizeof(int), M_DEVBUF, M_NOWAIT); 1335 *port = SK_PORT_A; 1336 device_set_ivars(sc->sk_devs[SK_PORT_A], port); 1337 1338 if (!(sk_win_read_1(sc, SK_CONFIG) & SK_CONFIG_SINGLEMAC)) { 1339 sc->sk_devs[SK_PORT_B] = device_add_child(dev, "sk", -1); 1340 port = malloc(sizeof(int), M_DEVBUF, M_NOWAIT); 1341 *port = SK_PORT_B; 1342 device_set_ivars(sc->sk_devs[SK_PORT_B], port); 1343 } 1344 1345 /* Turn on the 'driver is loaded' LED. */ 1346 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_ON); 1347 1348 bus_generic_attach(dev); 1349 SK_UNLOCK(sc); 1350 return(0); 1351 1352 fail: 1353 SK_UNLOCK(sc); 1354 mtx_destroy(&sc->sk_mtx); 1355 return(error); 1356 } 1357 1358 static int sk_detach_xmac(dev) 1359 device_t dev; 1360 { 1361 struct sk_softc *sc; 1362 struct sk_if_softc *sc_if; 1363 struct ifnet *ifp; 1364 1365 sc = device_get_softc(device_get_parent(dev)); 1366 sc_if = device_get_softc(dev); 1367 SK_IF_LOCK(sc_if); 1368 1369 ifp = &sc_if->arpcom.ac_if; 1370 sk_stop(sc_if); 1371 ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); 1372 bus_generic_detach(dev); 1373 if (sc_if->sk_miibus != NULL) 1374 device_delete_child(dev, sc_if->sk_miibus); 1375 contigfree(sc_if->sk_cdata.sk_jumbo_buf, SK_JMEM, M_DEVBUF); 1376 contigfree(sc_if->sk_rdata, sizeof(struct sk_ring_data), M_DEVBUF); 1377 SK_IF_UNLOCK(sc_if); 1378 1379 return(0); 1380 } 1381 1382 static int sk_detach(dev) 1383 device_t dev; 1384 { 1385 struct sk_softc *sc; 1386 1387 sc = device_get_softc(dev); 1388 SK_LOCK(sc); 1389 1390 bus_generic_detach(dev); 1391 if (sc->sk_devs[SK_PORT_A] != NULL) 1392 device_delete_child(dev, sc->sk_devs[SK_PORT_A]); 1393 if (sc->sk_devs[SK_PORT_B] != NULL) 1394 device_delete_child(dev, sc->sk_devs[SK_PORT_B]); 1395 1396 bus_teardown_intr(dev, sc->sk_irq, sc->sk_intrhand); 1397 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sk_irq); 1398 bus_release_resource(dev, SK_RES, SK_RID, sc->sk_res); 1399 1400 SK_UNLOCK(sc); 1401 mtx_destroy(&sc->sk_mtx); 1402 1403 return(0); 1404 } 1405 1406 static int sk_encap(sc_if, m_head, txidx) 1407 struct sk_if_softc *sc_if; 1408 struct mbuf *m_head; 1409 u_int32_t *txidx; 1410 { 1411 struct sk_tx_desc *f = NULL; 1412 struct mbuf *m; 1413 u_int32_t frag, cur, cnt = 0; 1414 1415 m = m_head; 1416 cur = frag = *txidx; 1417 1418 /* 1419 * Start packing the mbufs in this chain into 1420 * the fragment pointers. Stop when we run out 1421 * of fragments or hit the end of the mbuf chain. 1422 */ 1423 for (m = m_head; m != NULL; m = m->m_next) { 1424 if (m->m_len != 0) { 1425 if ((SK_TX_RING_CNT - 1426 (sc_if->sk_cdata.sk_tx_cnt + cnt)) < 2) 1427 return(ENOBUFS); 1428 f = &sc_if->sk_rdata->sk_tx_ring[frag]; 1429 f->sk_data_lo = vtophys(mtod(m, vm_offset_t)); 1430 f->sk_ctl = m->m_len | SK_OPCODE_DEFAULT; 1431 if (cnt == 0) 1432 f->sk_ctl |= SK_TXCTL_FIRSTFRAG; 1433 else 1434 f->sk_ctl |= SK_TXCTL_OWN; 1435 cur = frag; 1436 SK_INC(frag, SK_TX_RING_CNT); 1437 cnt++; 1438 } 1439 } 1440 1441 if (m != NULL) 1442 return(ENOBUFS); 1443 1444 sc_if->sk_rdata->sk_tx_ring[cur].sk_ctl |= 1445 SK_TXCTL_LASTFRAG|SK_TXCTL_EOF_INTR; 1446 sc_if->sk_cdata.sk_tx_chain[cur].sk_mbuf = m_head; 1447 sc_if->sk_rdata->sk_tx_ring[*txidx].sk_ctl |= SK_TXCTL_OWN; 1448 sc_if->sk_cdata.sk_tx_cnt += cnt; 1449 1450 *txidx = frag; 1451 1452 return(0); 1453 } 1454 1455 static void sk_start(ifp) 1456 struct ifnet *ifp; 1457 { 1458 struct sk_softc *sc; 1459 struct sk_if_softc *sc_if; 1460 struct mbuf *m_head = NULL; 1461 u_int32_t idx; 1462 1463 sc_if = ifp->if_softc; 1464 sc = sc_if->sk_softc; 1465 1466 SK_IF_LOCK(sc_if); 1467 1468 idx = sc_if->sk_cdata.sk_tx_prod; 1469 1470 while(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf == NULL) { 1471 IF_DEQUEUE(&ifp->if_snd, m_head); 1472 if (m_head == NULL) 1473 break; 1474 1475 /* 1476 * Pack the data into the transmit ring. If we 1477 * don't have room, set the OACTIVE flag and wait 1478 * for the NIC to drain the ring. 1479 */ 1480 if (sk_encap(sc_if, m_head, &idx)) { 1481 IF_PREPEND(&ifp->if_snd, m_head); 1482 ifp->if_flags |= IFF_OACTIVE; 1483 break; 1484 } 1485 1486 /* 1487 * If there's a BPF listener, bounce a copy of this frame 1488 * to him. 1489 */ 1490 if (ifp->if_bpf) 1491 bpf_mtap(ifp, m_head); 1492 } 1493 1494 /* Transmit */ 1495 sc_if->sk_cdata.sk_tx_prod = idx; 1496 CSR_WRITE_4(sc, sc_if->sk_tx_bmu, SK_TXBMU_TX_START); 1497 1498 /* Set a timeout in case the chip goes out to lunch. */ 1499 ifp->if_timer = 5; 1500 SK_IF_UNLOCK(sc_if); 1501 1502 return; 1503 } 1504 1505 1506 static void sk_watchdog(ifp) 1507 struct ifnet *ifp; 1508 { 1509 struct sk_if_softc *sc_if; 1510 1511 sc_if = ifp->if_softc; 1512 1513 printf("sk%d: watchdog timeout\n", sc_if->sk_unit); 1514 sk_init(sc_if); 1515 1516 return; 1517 } 1518 1519 static void sk_shutdown(dev) 1520 device_t dev; 1521 { 1522 struct sk_softc *sc; 1523 1524 sc = device_get_softc(dev); 1525 SK_LOCK(sc); 1526 1527 /* Turn off the 'driver is loaded' LED. */ 1528 CSR_WRITE_2(sc, SK_LED, SK_LED_GREEN_OFF); 1529 1530 /* 1531 * Reset the GEnesis controller. Doing this should also 1532 * assert the resets on the attached XMAC(s). 1533 */ 1534 sk_reset(sc); 1535 SK_UNLOCK(sc); 1536 1537 return; 1538 } 1539 1540 static void sk_rxeof(sc_if) 1541 struct sk_if_softc *sc_if; 1542 { 1543 struct ether_header *eh; 1544 struct mbuf *m; 1545 struct ifnet *ifp; 1546 struct sk_chain *cur_rx; 1547 int total_len = 0; 1548 int i; 1549 u_int32_t rxstat; 1550 1551 ifp = &sc_if->arpcom.ac_if; 1552 i = sc_if->sk_cdata.sk_rx_prod; 1553 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i]; 1554 1555 while(!(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl & SK_RXCTL_OWN)) { 1556 1557 cur_rx = &sc_if->sk_cdata.sk_rx_chain[i]; 1558 rxstat = sc_if->sk_rdata->sk_rx_ring[i].sk_xmac_rxstat; 1559 m = cur_rx->sk_mbuf; 1560 cur_rx->sk_mbuf = NULL; 1561 total_len = SK_RXBYTES(sc_if->sk_rdata->sk_rx_ring[i].sk_ctl); 1562 SK_INC(i, SK_RX_RING_CNT); 1563 1564 if (rxstat & XM_RXSTAT_ERRFRAME) { 1565 ifp->if_ierrors++; 1566 sk_newbuf(sc_if, cur_rx, m); 1567 continue; 1568 } 1569 1570 /* 1571 * Try to allocate a new jumbo buffer. If that 1572 * fails, copy the packet to mbufs and put the 1573 * jumbo buffer back in the ring so it can be 1574 * re-used. If allocating mbufs fails, then we 1575 * have to drop the packet. 1576 */ 1577 if (sk_newbuf(sc_if, cur_rx, NULL) == ENOBUFS) { 1578 struct mbuf *m0; 1579 m0 = m_devget(mtod(m, char *), total_len, ETHER_ALIGN, 1580 ifp, NULL); 1581 sk_newbuf(sc_if, cur_rx, m); 1582 if (m0 == NULL) { 1583 printf("sk%d: no receive buffers " 1584 "available -- packet dropped!\n", 1585 sc_if->sk_unit); 1586 ifp->if_ierrors++; 1587 continue; 1588 } 1589 m = m0; 1590 } else { 1591 m->m_pkthdr.rcvif = ifp; 1592 m->m_pkthdr.len = m->m_len = total_len; 1593 } 1594 1595 ifp->if_ipackets++; 1596 eh = mtod(m, struct ether_header *); 1597 1598 /* Remove header from mbuf and pass it on. */ 1599 m_adj(m, sizeof(struct ether_header)); 1600 ether_input(ifp, eh, m); 1601 } 1602 1603 sc_if->sk_cdata.sk_rx_prod = i; 1604 1605 return; 1606 } 1607 1608 static void sk_txeof(sc_if) 1609 struct sk_if_softc *sc_if; 1610 { 1611 struct sk_tx_desc *cur_tx = NULL; 1612 struct ifnet *ifp; 1613 u_int32_t idx; 1614 1615 ifp = &sc_if->arpcom.ac_if; 1616 1617 /* 1618 * Go through our tx ring and free mbufs for those 1619 * frames that have been sent. 1620 */ 1621 idx = sc_if->sk_cdata.sk_tx_cons; 1622 while(idx != sc_if->sk_cdata.sk_tx_prod) { 1623 cur_tx = &sc_if->sk_rdata->sk_tx_ring[idx]; 1624 if (cur_tx->sk_ctl & SK_TXCTL_OWN) 1625 break; 1626 if (cur_tx->sk_ctl & SK_TXCTL_LASTFRAG) 1627 ifp->if_opackets++; 1628 if (sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf != NULL) { 1629 m_freem(sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf); 1630 sc_if->sk_cdata.sk_tx_chain[idx].sk_mbuf = NULL; 1631 } 1632 sc_if->sk_cdata.sk_tx_cnt--; 1633 SK_INC(idx, SK_TX_RING_CNT); 1634 ifp->if_timer = 0; 1635 } 1636 1637 sc_if->sk_cdata.sk_tx_cons = idx; 1638 1639 if (cur_tx != NULL) 1640 ifp->if_flags &= ~IFF_OACTIVE; 1641 1642 return; 1643 } 1644 1645 static void sk_tick(xsc_if) 1646 void *xsc_if; 1647 { 1648 struct sk_if_softc *sc_if; 1649 struct mii_data *mii; 1650 struct ifnet *ifp; 1651 int i; 1652 1653 sc_if = xsc_if; 1654 SK_IF_LOCK(sc_if); 1655 ifp = &sc_if->arpcom.ac_if; 1656 mii = device_get_softc(sc_if->sk_miibus); 1657 1658 if (!(ifp->if_flags & IFF_UP)) { 1659 SK_IF_UNLOCK(sc_if); 1660 return; 1661 } 1662 1663 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 1664 sk_intr_bcom(sc_if); 1665 SK_IF_UNLOCK(sc_if); 1666 return; 1667 } 1668 1669 /* 1670 * According to SysKonnect, the correct way to verify that 1671 * the link has come back up is to poll bit 0 of the GPIO 1672 * register three times. This pin has the signal from the 1673 * link_sync pin connected to it; if we read the same link 1674 * state 3 times in a row, we know the link is up. 1675 */ 1676 for (i = 0; i < 3; i++) { 1677 if (SK_XM_READ_2(sc_if, XM_GPIO) & XM_GPIO_GP0_SET) 1678 break; 1679 } 1680 1681 if (i != 3) { 1682 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1683 SK_IF_UNLOCK(sc_if); 1684 return; 1685 } 1686 1687 /* Turn the GP0 interrupt back on. */ 1688 SK_XM_CLRBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET); 1689 SK_XM_READ_2(sc_if, XM_ISR); 1690 mii_tick(mii); 1691 untimeout(sk_tick, sc_if, sc_if->sk_tick_ch); 1692 1693 SK_IF_UNLOCK(sc_if); 1694 return; 1695 } 1696 1697 static void sk_intr_bcom(sc_if) 1698 struct sk_if_softc *sc_if; 1699 { 1700 struct sk_softc *sc; 1701 struct mii_data *mii; 1702 struct ifnet *ifp; 1703 int status; 1704 1705 sc = sc_if->sk_softc; 1706 mii = device_get_softc(sc_if->sk_miibus); 1707 ifp = &sc_if->arpcom.ac_if; 1708 1709 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 1710 1711 /* 1712 * Read the PHY interrupt register to make sure 1713 * we clear any pending interrupts. 1714 */ 1715 status = sk_miibus_readreg(sc_if->sk_dev, 1716 SK_PHYADDR_BCOM, BRGPHY_MII_ISR); 1717 1718 if (!(ifp->if_flags & IFF_RUNNING)) { 1719 sk_init_xmac(sc_if); 1720 return; 1721 } 1722 1723 if (status & (BRGPHY_ISR_LNK_CHG|BRGPHY_ISR_AN_PR)) { 1724 int lstat; 1725 lstat = sk_miibus_readreg(sc_if->sk_dev, 1726 SK_PHYADDR_BCOM, BRGPHY_MII_AUXSTS); 1727 1728 if (!(lstat & BRGPHY_AUXSTS_LINK) && sc_if->sk_link) { 1729 mii_mediachg(mii); 1730 /* Turn off the link LED. */ 1731 SK_IF_WRITE_1(sc_if, 0, 1732 SK_LINKLED1_CTL, SK_LINKLED_OFF); 1733 sc_if->sk_link = 0; 1734 } else if (status & BRGPHY_ISR_LNK_CHG) { 1735 sk_miibus_writereg(sc_if->sk_dev, SK_PHYADDR_BCOM, 1736 BRGPHY_MII_IMR, 0xFF00); 1737 mii_tick(mii); 1738 sc_if->sk_link = 1; 1739 /* Turn on the link LED. */ 1740 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, 1741 SK_LINKLED_ON|SK_LINKLED_LINKSYNC_OFF| 1742 SK_LINKLED_BLINK_OFF); 1743 } else { 1744 mii_tick(mii); 1745 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1746 } 1747 } 1748 1749 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 1750 1751 return; 1752 } 1753 1754 static void sk_intr_xmac(sc_if) 1755 struct sk_if_softc *sc_if; 1756 { 1757 struct sk_softc *sc; 1758 u_int16_t status; 1759 struct mii_data *mii; 1760 1761 sc = sc_if->sk_softc; 1762 mii = device_get_softc(sc_if->sk_miibus); 1763 status = SK_XM_READ_2(sc_if, XM_ISR); 1764 1765 /* 1766 * Link has gone down. Start MII tick timeout to 1767 * watch for link resync. 1768 */ 1769 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) { 1770 if (status & XM_ISR_GP0_SET) { 1771 SK_XM_SETBIT_2(sc_if, XM_IMR, XM_IMR_GP0_SET); 1772 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1773 } 1774 1775 if (status & XM_ISR_AUTONEG_DONE) { 1776 sc_if->sk_tick_ch = timeout(sk_tick, sc_if, hz); 1777 } 1778 } 1779 1780 if (status & XM_IMR_TX_UNDERRUN) 1781 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_TXFIFO); 1782 1783 if (status & XM_IMR_RX_OVERRUN) 1784 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_FLUSH_RXFIFO); 1785 1786 status = SK_XM_READ_2(sc_if, XM_ISR); 1787 1788 return; 1789 } 1790 1791 static void sk_intr(xsc) 1792 void *xsc; 1793 { 1794 struct sk_softc *sc = xsc; 1795 struct sk_if_softc *sc_if0 = NULL, *sc_if1 = NULL; 1796 struct ifnet *ifp0 = NULL, *ifp1 = NULL; 1797 u_int32_t status; 1798 1799 SK_LOCK(sc); 1800 1801 sc_if0 = sc->sk_if[SK_PORT_A]; 1802 sc_if1 = sc->sk_if[SK_PORT_B]; 1803 1804 if (sc_if0 != NULL) 1805 ifp0 = &sc_if0->arpcom.ac_if; 1806 if (sc_if1 != NULL) 1807 ifp1 = &sc_if1->arpcom.ac_if; 1808 1809 for (;;) { 1810 status = CSR_READ_4(sc, SK_ISSR); 1811 if (!(status & sc->sk_intrmask)) 1812 break; 1813 1814 /* Handle receive interrupts first. */ 1815 if (status & SK_ISR_RX1_EOF) { 1816 sk_rxeof(sc_if0); 1817 CSR_WRITE_4(sc, SK_BMU_RX_CSR0, 1818 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START); 1819 } 1820 if (status & SK_ISR_RX2_EOF) { 1821 sk_rxeof(sc_if1); 1822 CSR_WRITE_4(sc, SK_BMU_RX_CSR1, 1823 SK_RXBMU_CLR_IRQ_EOF|SK_RXBMU_RX_START); 1824 } 1825 1826 /* Then transmit interrupts. */ 1827 if (status & SK_ISR_TX1_S_EOF) { 1828 sk_txeof(sc_if0); 1829 CSR_WRITE_4(sc, SK_BMU_TXS_CSR0, 1830 SK_TXBMU_CLR_IRQ_EOF); 1831 } 1832 if (status & SK_ISR_TX2_S_EOF) { 1833 sk_txeof(sc_if1); 1834 CSR_WRITE_4(sc, SK_BMU_TXS_CSR1, 1835 SK_TXBMU_CLR_IRQ_EOF); 1836 } 1837 1838 /* Then MAC interrupts. */ 1839 if (status & SK_ISR_MAC1 && 1840 ifp0->if_flags & IFF_RUNNING) 1841 sk_intr_xmac(sc_if0); 1842 1843 if (status & SK_ISR_MAC2 && 1844 ifp1->if_flags & IFF_RUNNING) 1845 sk_intr_xmac(sc_if1); 1846 1847 if (status & SK_ISR_EXTERNAL_REG) { 1848 if (ifp0 != NULL) 1849 sk_intr_bcom(sc_if0); 1850 if (ifp1 != NULL) 1851 sk_intr_bcom(sc_if1); 1852 } 1853 } 1854 1855 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 1856 1857 if (ifp0 != NULL && ifp0->if_snd.ifq_head != NULL) 1858 sk_start(ifp0); 1859 if (ifp1 != NULL && ifp1->if_snd.ifq_head != NULL) 1860 sk_start(ifp1); 1861 1862 SK_UNLOCK(sc); 1863 1864 return; 1865 } 1866 1867 static void sk_init_xmac(sc_if) 1868 struct sk_if_softc *sc_if; 1869 { 1870 struct sk_softc *sc; 1871 struct ifnet *ifp; 1872 struct sk_bcom_hack bhack[] = { 1873 { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 }, 1874 { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 }, 1875 { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, 1876 { 0, 0 } }; 1877 1878 sc = sc_if->sk_softc; 1879 ifp = &sc_if->arpcom.ac_if; 1880 1881 /* Unreset the XMAC. */ 1882 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_UNRESET); 1883 DELAY(1000); 1884 1885 /* Reset the XMAC's internal state. */ 1886 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); 1887 1888 /* Save the XMAC II revision */ 1889 sc_if->sk_xmac_rev = XM_XMAC_REV(SK_XM_READ_4(sc_if, XM_DEVID)); 1890 1891 /* 1892 * Perform additional initialization for external PHYs, 1893 * namely for the 1000baseTX cards that use the XMAC's 1894 * GMII mode. 1895 */ 1896 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 1897 int i = 0; 1898 u_int32_t val; 1899 1900 /* Take PHY out of reset. */ 1901 val = sk_win_read_4(sc, SK_GPIO); 1902 if (sc_if->sk_port == SK_PORT_A) 1903 val |= SK_GPIO_DIR0|SK_GPIO_DAT0; 1904 else 1905 val |= SK_GPIO_DIR2|SK_GPIO_DAT2; 1906 sk_win_write_4(sc, SK_GPIO, val); 1907 1908 /* Enable GMII mode on the XMAC. */ 1909 SK_XM_SETBIT_2(sc_if, XM_HWCFG, XM_HWCFG_GMIIMODE); 1910 1911 sk_miibus_writereg(sc_if->sk_dev, SK_PHYADDR_BCOM, 1912 BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET); 1913 DELAY(10000); 1914 sk_miibus_writereg(sc_if->sk_dev, SK_PHYADDR_BCOM, 1915 BRGPHY_MII_IMR, 0xFFF0); 1916 1917 /* 1918 * Early versions of the BCM5400 apparently have 1919 * a bug that requires them to have their reserved 1920 * registers initialized to some magic values. I don't 1921 * know what the numbers do, I'm just the messenger. 1922 */ 1923 if (sk_miibus_readreg(sc_if->sk_dev, 1924 SK_PHYADDR_BCOM, 0x03) == 0x6041) { 1925 while(bhack[i].reg) { 1926 sk_miibus_writereg(sc_if->sk_dev, 1927 SK_PHYADDR_BCOM, bhack[i].reg, 1928 bhack[i].val); 1929 i++; 1930 } 1931 } 1932 } 1933 1934 /* Set station address */ 1935 SK_XM_WRITE_2(sc_if, XM_PAR0, 1936 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[0])); 1937 SK_XM_WRITE_2(sc_if, XM_PAR1, 1938 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[2])); 1939 SK_XM_WRITE_2(sc_if, XM_PAR2, 1940 *(u_int16_t *)(&sc_if->arpcom.ac_enaddr[4])); 1941 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_USE_STATION); 1942 1943 if (ifp->if_flags & IFF_PROMISC) { 1944 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); 1945 } else { 1946 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_PROMISC); 1947 } 1948 1949 if (ifp->if_flags & IFF_BROADCAST) { 1950 SK_XM_CLRBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD); 1951 } else { 1952 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_NOBROAD); 1953 } 1954 1955 /* We don't need the FCS appended to the packet. */ 1956 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_STRIPFCS); 1957 1958 /* We want short frames padded to 60 bytes. */ 1959 SK_XM_SETBIT_2(sc_if, XM_TXCMD, XM_TXCMD_AUTOPAD); 1960 1961 /* 1962 * Enable the reception of all error frames. This is is 1963 * a necessary evil due to the design of the XMAC. The 1964 * XMAC's receive FIFO is only 8K in size, however jumbo 1965 * frames can be up to 9000 bytes in length. When bad 1966 * frame filtering is enabled, the XMAC's RX FIFO operates 1967 * in 'store and forward' mode. For this to work, the 1968 * entire frame has to fit into the FIFO, but that means 1969 * that jumbo frames larger than 8192 bytes will be 1970 * truncated. Disabling all bad frame filtering causes 1971 * the RX FIFO to operate in streaming mode, in which 1972 * case the XMAC will start transfering frames out of the 1973 * RX FIFO as soon as the FIFO threshold is reached. 1974 */ 1975 SK_XM_SETBIT_4(sc_if, XM_MODE, XM_MODE_RX_BADFRAMES| 1976 XM_MODE_RX_GIANTS|XM_MODE_RX_RUNTS|XM_MODE_RX_CRCERRS| 1977 XM_MODE_RX_INRANGELEN); 1978 1979 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN)) 1980 SK_XM_SETBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK); 1981 else 1982 SK_XM_CLRBIT_2(sc_if, XM_RXCMD, XM_RXCMD_BIGPKTOK); 1983 1984 /* 1985 * Bump up the transmit threshold. This helps hold off transmit 1986 * underruns when we're blasting traffic from both ports at once. 1987 */ 1988 SK_XM_WRITE_2(sc_if, XM_TX_REQTHRESH, SK_XM_TX_FIFOTHRESH); 1989 1990 /* Set multicast filter */ 1991 sk_setmulti(sc_if); 1992 1993 /* Clear and enable interrupts */ 1994 SK_XM_READ_2(sc_if, XM_ISR); 1995 if (sc_if->sk_phytype == SK_PHYTYPE_XMAC) 1996 SK_XM_WRITE_2(sc_if, XM_IMR, XM_INTRS); 1997 else 1998 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF); 1999 2000 /* Configure MAC arbiter */ 2001 switch(sc_if->sk_xmac_rev) { 2002 case XM_XMAC_REV_B2: 2003 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_B2); 2004 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_B2); 2005 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_B2); 2006 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_B2); 2007 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_B2); 2008 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_B2); 2009 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_B2); 2010 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_B2); 2011 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2); 2012 break; 2013 case XM_XMAC_REV_C1: 2014 sk_win_write_1(sc, SK_RCINIT_RX1, SK_RCINIT_XMAC_C1); 2015 sk_win_write_1(sc, SK_RCINIT_TX1, SK_RCINIT_XMAC_C1); 2016 sk_win_write_1(sc, SK_RCINIT_RX2, SK_RCINIT_XMAC_C1); 2017 sk_win_write_1(sc, SK_RCINIT_TX2, SK_RCINIT_XMAC_C1); 2018 sk_win_write_1(sc, SK_MINIT_RX1, SK_MINIT_XMAC_C1); 2019 sk_win_write_1(sc, SK_MINIT_TX1, SK_MINIT_XMAC_C1); 2020 sk_win_write_1(sc, SK_MINIT_RX2, SK_MINIT_XMAC_C1); 2021 sk_win_write_1(sc, SK_MINIT_TX2, SK_MINIT_XMAC_C1); 2022 sk_win_write_1(sc, SK_RECOVERY_CTL, SK_RECOVERY_XMAC_B2); 2023 break; 2024 default: 2025 break; 2026 } 2027 sk_win_write_2(sc, SK_MACARB_CTL, 2028 SK_MACARBCTL_UNRESET|SK_MACARBCTL_FASTOE_OFF); 2029 2030 sc_if->sk_link = 1; 2031 2032 return; 2033 } 2034 2035 /* 2036 * Note that to properly initialize any part of the GEnesis chip, 2037 * you first have to take it out of reset mode. 2038 */ 2039 static void sk_init(xsc) 2040 void *xsc; 2041 { 2042 struct sk_if_softc *sc_if = xsc; 2043 struct sk_softc *sc; 2044 struct ifnet *ifp; 2045 struct mii_data *mii; 2046 2047 SK_IF_LOCK(sc_if); 2048 2049 ifp = &sc_if->arpcom.ac_if; 2050 sc = sc_if->sk_softc; 2051 mii = device_get_softc(sc_if->sk_miibus); 2052 2053 /* Cancel pending I/O and free all RX/TX buffers. */ 2054 sk_stop(sc_if); 2055 2056 /* Configure LINK_SYNC LED */ 2057 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_ON); 2058 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_ON); 2059 2060 /* Configure RX LED */ 2061 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_START); 2062 2063 /* Configure TX LED */ 2064 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_TXLEDCTL_COUNTER_START); 2065 2066 /* Configure I2C registers */ 2067 2068 /* Configure XMAC(s) */ 2069 sk_init_xmac(sc_if); 2070 mii_mediachg(mii); 2071 2072 /* Configure MAC FIFOs */ 2073 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_UNRESET); 2074 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_END, SK_FIFO_END); 2075 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_ON); 2076 2077 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_UNRESET); 2078 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_END, SK_FIFO_END); 2079 SK_IF_WRITE_4(sc_if, 0, SK_TXF1_CTL, SK_FIFO_ON); 2080 2081 /* Configure transmit arbiter(s) */ 2082 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, 2083 SK_TXARCTL_ON|SK_TXARCTL_FSYNC_ON); 2084 2085 /* Configure RAMbuffers */ 2086 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_UNRESET); 2087 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_START, sc_if->sk_rx_ramstart); 2088 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_WR_PTR, sc_if->sk_rx_ramstart); 2089 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_RD_PTR, sc_if->sk_rx_ramstart); 2090 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_END, sc_if->sk_rx_ramend); 2091 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_ON); 2092 2093 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_UNRESET); 2094 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_STORENFWD_ON); 2095 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_START, sc_if->sk_tx_ramstart); 2096 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_WR_PTR, sc_if->sk_tx_ramstart); 2097 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_RD_PTR, sc_if->sk_tx_ramstart); 2098 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_END, sc_if->sk_tx_ramend); 2099 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_ON); 2100 2101 /* Configure BMUs */ 2102 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_ONLINE); 2103 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_LO, 2104 vtophys(&sc_if->sk_rdata->sk_rx_ring[0])); 2105 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_CURADDR_HI, 0); 2106 2107 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_ONLINE); 2108 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_LO, 2109 vtophys(&sc_if->sk_rdata->sk_tx_ring[0])); 2110 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_CURADDR_HI, 0); 2111 2112 /* Init descriptors */ 2113 if (sk_init_rx_ring(sc_if) == ENOBUFS) { 2114 printf("sk%d: initialization failed: no " 2115 "memory for rx buffers\n", sc_if->sk_unit); 2116 sk_stop(sc_if); 2117 SK_IF_UNLOCK(sc_if); 2118 return; 2119 } 2120 sk_init_tx_ring(sc_if); 2121 2122 /* Configure interrupt handling */ 2123 CSR_READ_4(sc, SK_ISSR); 2124 if (sc_if->sk_port == SK_PORT_A) 2125 sc->sk_intrmask |= SK_INTRS1; 2126 else 2127 sc->sk_intrmask |= SK_INTRS2; 2128 2129 sc->sk_intrmask |= SK_ISR_EXTERNAL_REG; 2130 2131 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2132 2133 /* Start BMUs. */ 2134 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_RX_START); 2135 2136 /* Enable XMACs TX and RX state machines */ 2137 SK_XM_CLRBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_IGNPAUSE); 2138 SK_XM_SETBIT_2(sc_if, XM_MMUCMD, XM_MMUCMD_TX_ENB|XM_MMUCMD_RX_ENB); 2139 2140 ifp->if_flags |= IFF_RUNNING; 2141 ifp->if_flags &= ~IFF_OACTIVE; 2142 2143 SK_IF_UNLOCK(sc_if); 2144 2145 return; 2146 } 2147 2148 static void sk_stop(sc_if) 2149 struct sk_if_softc *sc_if; 2150 { 2151 int i; 2152 struct sk_softc *sc; 2153 struct ifnet *ifp; 2154 2155 SK_IF_LOCK(sc_if); 2156 sc = sc_if->sk_softc; 2157 ifp = &sc_if->arpcom.ac_if; 2158 2159 untimeout(sk_tick, sc_if, sc_if->sk_tick_ch); 2160 2161 if (sc_if->sk_phytype == SK_PHYTYPE_BCOM) { 2162 u_int32_t val; 2163 2164 /* Put PHY back into reset. */ 2165 val = sk_win_read_4(sc, SK_GPIO); 2166 if (sc_if->sk_port == SK_PORT_A) { 2167 val |= SK_GPIO_DIR0; 2168 val &= ~SK_GPIO_DAT0; 2169 } else { 2170 val |= SK_GPIO_DIR2; 2171 val &= ~SK_GPIO_DAT2; 2172 } 2173 sk_win_write_4(sc, SK_GPIO, val); 2174 } 2175 2176 /* Turn off various components of this interface. */ 2177 SK_XM_SETBIT_2(sc_if, XM_GPIO, XM_GPIO_RESETMAC); 2178 SK_IF_WRITE_2(sc_if, 0, SK_TXF1_MACCTL, SK_TXMACCTL_XMAC_RESET); 2179 SK_IF_WRITE_4(sc_if, 0, SK_RXF1_CTL, SK_FIFO_RESET); 2180 SK_IF_WRITE_4(sc_if, 0, SK_RXQ1_BMU_CSR, SK_RXBMU_OFFLINE); 2181 SK_IF_WRITE_4(sc_if, 0, SK_RXRB1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF); 2182 SK_IF_WRITE_4(sc_if, 1, SK_TXQS1_BMU_CSR, SK_TXBMU_OFFLINE); 2183 SK_IF_WRITE_4(sc_if, 1, SK_TXRBS1_CTLTST, SK_RBCTL_RESET|SK_RBCTL_OFF); 2184 SK_IF_WRITE_1(sc_if, 0, SK_TXAR1_COUNTERCTL, SK_TXARCTL_OFF); 2185 SK_IF_WRITE_1(sc_if, 0, SK_RXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP); 2186 SK_IF_WRITE_1(sc_if, 0, SK_TXLED1_CTL, SK_RXLEDCTL_COUNTER_STOP); 2187 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_OFF); 2188 SK_IF_WRITE_1(sc_if, 0, SK_LINKLED1_CTL, SK_LINKLED_LINKSYNC_OFF); 2189 2190 /* Disable interrupts */ 2191 if (sc_if->sk_port == SK_PORT_A) 2192 sc->sk_intrmask &= ~SK_INTRS1; 2193 else 2194 sc->sk_intrmask &= ~SK_INTRS2; 2195 CSR_WRITE_4(sc, SK_IMR, sc->sk_intrmask); 2196 2197 SK_XM_READ_2(sc_if, XM_ISR); 2198 SK_XM_WRITE_2(sc_if, XM_IMR, 0xFFFF); 2199 2200 /* Free RX and TX mbufs still in the queues. */ 2201 for (i = 0; i < SK_RX_RING_CNT; i++) { 2202 if (sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf != NULL) { 2203 m_freem(sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf); 2204 sc_if->sk_cdata.sk_rx_chain[i].sk_mbuf = NULL; 2205 } 2206 } 2207 2208 for (i = 0; i < SK_TX_RING_CNT; i++) { 2209 if (sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf != NULL) { 2210 m_freem(sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf); 2211 sc_if->sk_cdata.sk_tx_chain[i].sk_mbuf = NULL; 2212 } 2213 } 2214 2215 ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE); 2216 SK_IF_UNLOCK(sc_if); 2217 return; 2218 } 2219