1 /*- 2 * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/module.h> 32 #include <sys/systm.h> 33 #include <sys/kernel.h> 34 #include <sys/ata.h> 35 #include <sys/bus.h> 36 #include <sys/endian.h> 37 #include <sys/malloc.h> 38 #include <sys/lock.h> 39 #include <sys/mutex.h> 40 #include <sys/sema.h> 41 #include <sys/taskqueue.h> 42 #include <vm/uma.h> 43 #include <machine/stdarg.h> 44 #include <machine/resource.h> 45 #include <machine/bus.h> 46 #include <sys/rman.h> 47 #include <dev/pci/pcivar.h> 48 #include <dev/pci/pcireg.h> 49 #include "siis.h" 50 51 #include <cam/cam.h> 52 #include <cam/cam_ccb.h> 53 #include <cam/cam_sim.h> 54 #include <cam/cam_xpt_sim.h> 55 #include <cam/cam_debug.h> 56 57 /* local prototypes */ 58 static int siis_setup_interrupt(device_t dev); 59 static void siis_intr(void *data); 60 static int siis_suspend(device_t dev); 61 static int siis_resume(device_t dev); 62 static int siis_ch_init(device_t dev); 63 static int siis_ch_deinit(device_t dev); 64 static int siis_ch_suspend(device_t dev); 65 static int siis_ch_resume(device_t dev); 66 static void siis_ch_intr_locked(void *data); 67 static void siis_ch_intr(void *data); 68 static void siis_begin_transaction(device_t dev, union ccb *ccb); 69 static void siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error); 70 static void siis_execute_transaction(struct siis_slot *slot); 71 static void siis_timeout(struct siis_slot *slot); 72 static void siis_end_transaction(struct siis_slot *slot, enum siis_err_type et); 73 static int siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag); 74 static void siis_dmainit(device_t dev); 75 static void siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); 76 static void siis_dmafini(device_t dev); 77 static void siis_slotsalloc(device_t dev); 78 static void siis_slotsfree(device_t dev); 79 static void siis_reset(device_t dev); 80 static void siis_portinit(device_t dev); 81 static int siis_wait_ready(device_t dev, int t); 82 83 static int siis_sata_connect(struct siis_channel *ch); 84 85 static void siis_issue_read_log(device_t dev); 86 static void siis_process_read_log(device_t dev, union ccb *ccb); 87 88 static void siisaction(struct cam_sim *sim, union ccb *ccb); 89 static void siispoll(struct cam_sim *sim); 90 91 MALLOC_DEFINE(M_SIIS, "SIIS driver", "SIIS driver data buffers"); 92 93 static struct { 94 uint32_t id; 95 const char *name; 96 int ports; 97 int quirks; 98 #define SIIS_Q_SNTF 1 99 #define SIIS_Q_NOMSI 2 100 } siis_ids[] = { 101 {0x31241095, "SiI3124", 4, 0}, 102 {0x31248086, "SiI3124", 4, 0}, 103 {0x31321095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 104 {0x02421095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 105 {0x02441095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 106 {0x31311095, "SiI3131", 1, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 107 {0x35311095, "SiI3531", 1, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 108 {0, NULL, 0, 0} 109 }; 110 111 static int 112 siis_probe(device_t dev) 113 { 114 char buf[64]; 115 int i; 116 uint32_t devid = pci_get_devid(dev); 117 118 for (i = 0; siis_ids[i].id != 0; i++) { 119 if (siis_ids[i].id == devid) { 120 snprintf(buf, sizeof(buf), "%s SATA controller", 121 siis_ids[i].name); 122 device_set_desc_copy(dev, buf); 123 return (BUS_PROBE_VENDOR); 124 } 125 } 126 return (ENXIO); 127 } 128 129 static int 130 siis_attach(device_t dev) 131 { 132 struct siis_controller *ctlr = device_get_softc(dev); 133 uint32_t devid = pci_get_devid(dev); 134 device_t child; 135 int error, i, unit; 136 137 ctlr->dev = dev; 138 for (i = 0; siis_ids[i].id != 0; i++) { 139 if (siis_ids[i].id == devid) 140 break; 141 } 142 ctlr->quirks = siis_ids[i].quirks; 143 /* Global memory */ 144 ctlr->r_grid = PCIR_BAR(0); 145 if (!(ctlr->r_gmem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 146 &ctlr->r_grid, RF_ACTIVE))) 147 return (ENXIO); 148 ctlr->gctl = ATA_INL(ctlr->r_gmem, SIIS_GCTL); 149 /* Channels memory */ 150 ctlr->r_rid = PCIR_BAR(2); 151 if (!(ctlr->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 152 &ctlr->r_rid, RF_ACTIVE))) 153 return (ENXIO); 154 /* Setup our own memory management for channels. */ 155 ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem); 156 ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem); 157 ctlr->sc_iomem.rm_type = RMAN_ARRAY; 158 ctlr->sc_iomem.rm_descr = "I/O memory addresses"; 159 if ((error = rman_init(&ctlr->sc_iomem)) != 0) { 160 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 161 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 162 return (error); 163 } 164 if ((error = rman_manage_region(&ctlr->sc_iomem, 165 rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) { 166 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 167 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 168 rman_fini(&ctlr->sc_iomem); 169 return (error); 170 } 171 pci_enable_busmaster(dev); 172 /* Reset controller */ 173 siis_resume(dev); 174 /* Number of HW channels */ 175 ctlr->channels = siis_ids[i].ports; 176 /* Setup interrupts. */ 177 if (siis_setup_interrupt(dev)) { 178 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 179 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 180 rman_fini(&ctlr->sc_iomem); 181 return ENXIO; 182 } 183 /* Attach all channels on this controller */ 184 for (unit = 0; unit < ctlr->channels; unit++) { 185 child = device_add_child(dev, "siisch", -1); 186 if (child == NULL) 187 device_printf(dev, "failed to add channel device\n"); 188 else 189 device_set_ivars(child, (void *)(intptr_t)unit); 190 } 191 bus_generic_attach(dev); 192 return 0; 193 } 194 195 static int 196 siis_detach(device_t dev) 197 { 198 struct siis_controller *ctlr = device_get_softc(dev); 199 device_t *children; 200 int nchildren, i; 201 202 /* Detach & delete all children */ 203 if (!device_get_children(dev, &children, &nchildren)) { 204 for (i = 0; i < nchildren; i++) 205 device_delete_child(dev, children[i]); 206 free(children, M_TEMP); 207 } 208 /* Free interrupts. */ 209 if (ctlr->irq.r_irq) { 210 bus_teardown_intr(dev, ctlr->irq.r_irq, 211 ctlr->irq.handle); 212 bus_release_resource(dev, SYS_RES_IRQ, 213 ctlr->irq.r_irq_rid, ctlr->irq.r_irq); 214 } 215 pci_release_msi(dev); 216 /* Free memory. */ 217 rman_fini(&ctlr->sc_iomem); 218 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 219 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 220 return (0); 221 } 222 223 static int 224 siis_suspend(device_t dev) 225 { 226 struct siis_controller *ctlr = device_get_softc(dev); 227 228 bus_generic_suspend(dev); 229 /* Put controller into reset state. */ 230 ctlr->gctl |= SIIS_GCTL_GRESET; 231 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl); 232 return 0; 233 } 234 235 static int 236 siis_resume(device_t dev) 237 { 238 struct siis_controller *ctlr = device_get_softc(dev); 239 240 /* Set PCIe max read request size to at least 1024 bytes */ 241 if (pci_get_max_read_req(dev) < 1024) 242 pci_set_max_read_req(dev, 1024); 243 /* Put controller into reset state. */ 244 ctlr->gctl |= SIIS_GCTL_GRESET; 245 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl); 246 DELAY(10000); 247 /* Get controller out of reset state and enable port interrupts. */ 248 ctlr->gctl &= ~(SIIS_GCTL_GRESET | SIIS_GCTL_I2C_IE); 249 ctlr->gctl |= 0x0000000f; 250 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl); 251 return (bus_generic_resume(dev)); 252 } 253 254 static int 255 siis_setup_interrupt(device_t dev) 256 { 257 struct siis_controller *ctlr = device_get_softc(dev); 258 int msi = ctlr->quirks & SIIS_Q_NOMSI ? 0 : 1; 259 260 /* Process hints. */ 261 resource_int_value(device_get_name(dev), 262 device_get_unit(dev), "msi", &msi); 263 if (msi < 0) 264 msi = 0; 265 else if (msi > 0) 266 msi = min(1, pci_msi_count(dev)); 267 /* Allocate MSI if needed/present. */ 268 if (msi && pci_alloc_msi(dev, &msi) != 0) 269 msi = 0; 270 /* Allocate all IRQs. */ 271 ctlr->irq.r_irq_rid = msi ? 1 : 0; 272 if (!(ctlr->irq.r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 273 &ctlr->irq.r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) { 274 device_printf(dev, "unable to map interrupt\n"); 275 return ENXIO; 276 } 277 if ((bus_setup_intr(dev, ctlr->irq.r_irq, ATA_INTR_FLAGS, NULL, 278 siis_intr, ctlr, &ctlr->irq.handle))) { 279 /* SOS XXX release r_irq */ 280 device_printf(dev, "unable to setup interrupt\n"); 281 return ENXIO; 282 } 283 return (0); 284 } 285 286 /* 287 * Common case interrupt handler. 288 */ 289 static void 290 siis_intr(void *data) 291 { 292 struct siis_controller *ctlr = (struct siis_controller *)data; 293 u_int32_t is; 294 void *arg; 295 int unit; 296 297 is = ATA_INL(ctlr->r_gmem, SIIS_IS); 298 for (unit = 0; unit < ctlr->channels; unit++) { 299 if ((is & SIIS_IS_PORT(unit)) != 0 && 300 (arg = ctlr->interrupt[unit].argument)) { 301 ctlr->interrupt[unit].function(arg); 302 } 303 } 304 /* Acknowledge interrupt, if MSI enabled. */ 305 if (ctlr->irq.r_irq_rid) { 306 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, 307 ctlr->gctl | SIIS_GCTL_MSIACK); 308 } 309 } 310 311 static struct resource * 312 siis_alloc_resource(device_t dev, device_t child, int type, int *rid, 313 u_long start, u_long end, u_long count, u_int flags) 314 { 315 struct siis_controller *ctlr = device_get_softc(dev); 316 int unit = ((struct siis_channel *)device_get_softc(child))->unit; 317 struct resource *res = NULL; 318 int offset = unit << 13; 319 long st; 320 321 switch (type) { 322 case SYS_RES_MEMORY: 323 st = rman_get_start(ctlr->r_mem); 324 res = rman_reserve_resource(&ctlr->sc_iomem, st + offset, 325 st + offset + 0x2000, 0x2000, RF_ACTIVE, child); 326 if (res) { 327 bus_space_handle_t bsh; 328 bus_space_tag_t bst; 329 bsh = rman_get_bushandle(ctlr->r_mem); 330 bst = rman_get_bustag(ctlr->r_mem); 331 bus_space_subregion(bst, bsh, offset, 0x2000, &bsh); 332 rman_set_bushandle(res, bsh); 333 rman_set_bustag(res, bst); 334 } 335 break; 336 case SYS_RES_IRQ: 337 if (*rid == ATA_IRQ_RID) 338 res = ctlr->irq.r_irq; 339 break; 340 } 341 return (res); 342 } 343 344 static int 345 siis_release_resource(device_t dev, device_t child, int type, int rid, 346 struct resource *r) 347 { 348 349 switch (type) { 350 case SYS_RES_MEMORY: 351 rman_release_resource(r); 352 return (0); 353 case SYS_RES_IRQ: 354 if (rid != ATA_IRQ_RID) 355 return ENOENT; 356 return (0); 357 } 358 return (EINVAL); 359 } 360 361 static int 362 siis_setup_intr(device_t dev, device_t child, struct resource *irq, 363 int flags, driver_filter_t *filter, driver_intr_t *function, 364 void *argument, void **cookiep) 365 { 366 struct siis_controller *ctlr = device_get_softc(dev); 367 int unit = (intptr_t)device_get_ivars(child); 368 369 if (filter != NULL) { 370 printf("siis.c: we cannot use a filter here\n"); 371 return (EINVAL); 372 } 373 ctlr->interrupt[unit].function = function; 374 ctlr->interrupt[unit].argument = argument; 375 return (0); 376 } 377 378 static int 379 siis_teardown_intr(device_t dev, device_t child, struct resource *irq, 380 void *cookie) 381 { 382 struct siis_controller *ctlr = device_get_softc(dev); 383 int unit = (intptr_t)device_get_ivars(child); 384 385 ctlr->interrupt[unit].function = NULL; 386 ctlr->interrupt[unit].argument = NULL; 387 return (0); 388 } 389 390 static int 391 siis_print_child(device_t dev, device_t child) 392 { 393 int retval; 394 395 retval = bus_print_child_header(dev, child); 396 retval += printf(" at channel %d", 397 (int)(intptr_t)device_get_ivars(child)); 398 retval += bus_print_child_footer(dev, child); 399 400 return (retval); 401 } 402 403 static int 404 siis_child_location_str(device_t dev, device_t child, char *buf, 405 size_t buflen) 406 { 407 408 snprintf(buf, buflen, "channel=%d", 409 (int)(intptr_t)device_get_ivars(child)); 410 return (0); 411 } 412 413 devclass_t siis_devclass; 414 static device_method_t siis_methods[] = { 415 DEVMETHOD(device_probe, siis_probe), 416 DEVMETHOD(device_attach, siis_attach), 417 DEVMETHOD(device_detach, siis_detach), 418 DEVMETHOD(device_suspend, siis_suspend), 419 DEVMETHOD(device_resume, siis_resume), 420 DEVMETHOD(bus_print_child, siis_print_child), 421 DEVMETHOD(bus_alloc_resource, siis_alloc_resource), 422 DEVMETHOD(bus_release_resource, siis_release_resource), 423 DEVMETHOD(bus_setup_intr, siis_setup_intr), 424 DEVMETHOD(bus_teardown_intr,siis_teardown_intr), 425 DEVMETHOD(bus_child_location_str, siis_child_location_str), 426 { 0, 0 } 427 }; 428 static driver_t siis_driver = { 429 "siis", 430 siis_methods, 431 sizeof(struct siis_controller) 432 }; 433 DRIVER_MODULE(siis, pci, siis_driver, siis_devclass, 0, 0); 434 MODULE_VERSION(siis, 1); 435 MODULE_DEPEND(siis, cam, 1, 1, 1); 436 437 static int 438 siis_ch_probe(device_t dev) 439 { 440 441 device_set_desc_copy(dev, "SIIS channel"); 442 return (0); 443 } 444 445 static int 446 siis_ch_attach(device_t dev) 447 { 448 struct siis_controller *ctlr = device_get_softc(device_get_parent(dev)); 449 struct siis_channel *ch = device_get_softc(dev); 450 struct cam_devq *devq; 451 int rid, error, i, sata_rev = 0; 452 453 ch->dev = dev; 454 ch->unit = (intptr_t)device_get_ivars(dev); 455 ch->quirks = ctlr->quirks; 456 resource_int_value(device_get_name(dev), 457 device_get_unit(dev), "pm_level", &ch->pm_level); 458 resource_int_value(device_get_name(dev), 459 device_get_unit(dev), "sata_rev", &sata_rev); 460 for (i = 0; i < 16; i++) { 461 ch->user[i].revision = sata_rev; 462 ch->user[i].mode = 0; 463 ch->user[i].bytecount = 8192; 464 ch->user[i].tags = SIIS_MAX_SLOTS; 465 ch->curr[i] = ch->user[i]; 466 if (ch->pm_level) 467 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ; 468 } 469 mtx_init(&ch->mtx, "SIIS channel lock", NULL, MTX_DEF); 470 rid = ch->unit; 471 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 472 &rid, RF_ACTIVE))) 473 return (ENXIO); 474 siis_dmainit(dev); 475 siis_slotsalloc(dev); 476 siis_ch_init(dev); 477 mtx_lock(&ch->mtx); 478 rid = ATA_IRQ_RID; 479 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 480 &rid, RF_SHAREABLE | RF_ACTIVE))) { 481 device_printf(dev, "Unable to map interrupt\n"); 482 error = ENXIO; 483 goto err0; 484 } 485 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL, 486 siis_ch_intr_locked, dev, &ch->ih))) { 487 device_printf(dev, "Unable to setup interrupt\n"); 488 error = ENXIO; 489 goto err1; 490 } 491 /* Create the device queue for our SIM. */ 492 devq = cam_simq_alloc(SIIS_MAX_SLOTS); 493 if (devq == NULL) { 494 device_printf(dev, "Unable to allocate simq\n"); 495 error = ENOMEM; 496 goto err1; 497 } 498 /* Construct SIM entry */ 499 ch->sim = cam_sim_alloc(siisaction, siispoll, "siisch", ch, 500 device_get_unit(dev), &ch->mtx, 2, SIIS_MAX_SLOTS, devq); 501 if (ch->sim == NULL) { 502 cam_simq_free(devq); 503 device_printf(dev, "unable to allocate sim\n"); 504 error = ENOMEM; 505 goto err1; 506 } 507 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) { 508 device_printf(dev, "unable to register xpt bus\n"); 509 error = ENXIO; 510 goto err2; 511 } 512 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim), 513 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 514 device_printf(dev, "unable to create path\n"); 515 error = ENXIO; 516 goto err3; 517 } 518 mtx_unlock(&ch->mtx); 519 return (0); 520 521 err3: 522 xpt_bus_deregister(cam_sim_path(ch->sim)); 523 err2: 524 cam_sim_free(ch->sim, /*free_devq*/TRUE); 525 err1: 526 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 527 err0: 528 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 529 mtx_unlock(&ch->mtx); 530 return (error); 531 } 532 533 static int 534 siis_ch_detach(device_t dev) 535 { 536 struct siis_channel *ch = device_get_softc(dev); 537 538 mtx_lock(&ch->mtx); 539 xpt_async(AC_LOST_DEVICE, ch->path, NULL); 540 xpt_free_path(ch->path); 541 xpt_bus_deregister(cam_sim_path(ch->sim)); 542 cam_sim_free(ch->sim, /*free_devq*/TRUE); 543 mtx_unlock(&ch->mtx); 544 545 bus_teardown_intr(dev, ch->r_irq, ch->ih); 546 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 547 548 siis_ch_deinit(dev); 549 siis_slotsfree(dev); 550 siis_dmafini(dev); 551 552 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 553 mtx_destroy(&ch->mtx); 554 return (0); 555 } 556 557 static int 558 siis_ch_init(device_t dev) 559 { 560 struct siis_channel *ch = device_get_softc(dev); 561 562 /* Get port out of reset state. */ 563 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET); 564 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT); 565 if (ch->pm_present) 566 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); 567 else 568 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); 569 /* Enable port interrupts */ 570 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); 571 return (0); 572 } 573 574 static int 575 siis_ch_deinit(device_t dev) 576 { 577 struct siis_channel *ch = device_get_softc(dev); 578 579 /* Put port into reset state. */ 580 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET); 581 return (0); 582 } 583 584 static int 585 siis_ch_suspend(device_t dev) 586 { 587 struct siis_channel *ch = device_get_softc(dev); 588 589 mtx_lock(&ch->mtx); 590 xpt_freeze_simq(ch->sim, 1); 591 while (ch->oslots) 592 msleep(ch, &ch->mtx, PRIBIO, "siissusp", hz/100); 593 siis_ch_deinit(dev); 594 mtx_unlock(&ch->mtx); 595 return (0); 596 } 597 598 static int 599 siis_ch_resume(device_t dev) 600 { 601 struct siis_channel *ch = device_get_softc(dev); 602 603 mtx_lock(&ch->mtx); 604 siis_ch_init(dev); 605 siis_reset(dev); 606 xpt_release_simq(ch->sim, TRUE); 607 mtx_unlock(&ch->mtx); 608 return (0); 609 } 610 611 devclass_t siisch_devclass; 612 static device_method_t siisch_methods[] = { 613 DEVMETHOD(device_probe, siis_ch_probe), 614 DEVMETHOD(device_attach, siis_ch_attach), 615 DEVMETHOD(device_detach, siis_ch_detach), 616 DEVMETHOD(device_suspend, siis_ch_suspend), 617 DEVMETHOD(device_resume, siis_ch_resume), 618 { 0, 0 } 619 }; 620 static driver_t siisch_driver = { 621 "siisch", 622 siisch_methods, 623 sizeof(struct siis_channel) 624 }; 625 DRIVER_MODULE(siisch, siis, siisch_driver, siis_devclass, 0, 0); 626 627 struct siis_dc_cb_args { 628 bus_addr_t maddr; 629 int error; 630 }; 631 632 static void 633 siis_dmainit(device_t dev) 634 { 635 struct siis_channel *ch = device_get_softc(dev); 636 struct siis_dc_cb_args dcba; 637 638 /* Command area. */ 639 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0, 640 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 641 NULL, NULL, SIIS_WORK_SIZE, 1, SIIS_WORK_SIZE, 642 0, NULL, NULL, &ch->dma.work_tag)) 643 goto error; 644 if (bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 0, 645 &ch->dma.work_map)) 646 goto error; 647 if (bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work, 648 SIIS_WORK_SIZE, siis_dmasetupc_cb, &dcba, 0) || dcba.error) { 649 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 650 goto error; 651 } 652 ch->dma.work_bus = dcba.maddr; 653 /* Data area. */ 654 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 655 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 656 NULL, NULL, 657 SIIS_SG_ENTRIES * PAGE_SIZE * SIIS_MAX_SLOTS, 658 SIIS_SG_ENTRIES, 0xFFFFFFFF, 659 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) { 660 goto error; 661 } 662 return; 663 664 error: 665 device_printf(dev, "WARNING - DMA initialization failed\n"); 666 siis_dmafini(dev); 667 } 668 669 static void 670 siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) 671 { 672 struct siis_dc_cb_args *dcba = (struct siis_dc_cb_args *)xsc; 673 674 if (!(dcba->error = error)) 675 dcba->maddr = segs[0].ds_addr; 676 } 677 678 static void 679 siis_dmafini(device_t dev) 680 { 681 struct siis_channel *ch = device_get_softc(dev); 682 683 if (ch->dma.data_tag) { 684 bus_dma_tag_destroy(ch->dma.data_tag); 685 ch->dma.data_tag = NULL; 686 } 687 if (ch->dma.work_bus) { 688 bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map); 689 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 690 ch->dma.work_bus = 0; 691 ch->dma.work_map = NULL; 692 ch->dma.work = NULL; 693 } 694 if (ch->dma.work_tag) { 695 bus_dma_tag_destroy(ch->dma.work_tag); 696 ch->dma.work_tag = NULL; 697 } 698 } 699 700 static void 701 siis_slotsalloc(device_t dev) 702 { 703 struct siis_channel *ch = device_get_softc(dev); 704 int i; 705 706 /* Alloc and setup command/dma slots */ 707 bzero(ch->slot, sizeof(ch->slot)); 708 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 709 struct siis_slot *slot = &ch->slot[i]; 710 711 slot->dev = dev; 712 slot->slot = i; 713 slot->state = SIIS_SLOT_EMPTY; 714 slot->ccb = NULL; 715 callout_init_mtx(&slot->timeout, &ch->mtx, 0); 716 717 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map)) 718 device_printf(ch->dev, "FAILURE - create data_map\n"); 719 } 720 } 721 722 static void 723 siis_slotsfree(device_t dev) 724 { 725 struct siis_channel *ch = device_get_softc(dev); 726 int i; 727 728 /* Free all dma slots */ 729 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 730 struct siis_slot *slot = &ch->slot[i]; 731 732 callout_drain(&slot->timeout); 733 if (slot->dma.data_map) { 734 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map); 735 slot->dma.data_map = NULL; 736 } 737 } 738 } 739 740 static void 741 siis_notify_events(device_t dev) 742 { 743 struct siis_channel *ch = device_get_softc(dev); 744 struct cam_path *dpath; 745 u_int32_t status; 746 int i; 747 748 if (ch->quirks & SIIS_Q_SNTF) { 749 status = ATA_INL(ch->r_mem, SIIS_P_SNTF); 750 ATA_OUTL(ch->r_mem, SIIS_P_SNTF, status); 751 } else { 752 /* 753 * Without SNTF we have no idea which device sent notification. 754 * If PMP is connected, assume it, else - device. 755 */ 756 status = (ch->pm_present) ? 0x8000 : 0x0001; 757 } 758 if (bootverbose) 759 device_printf(dev, "SNTF 0x%04x\n", status); 760 for (i = 0; i < 16; i++) { 761 if ((status & (1 << i)) == 0) 762 continue; 763 if (xpt_create_path(&dpath, NULL, 764 xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) { 765 xpt_async(AC_SCSI_AEN, dpath, NULL); 766 xpt_free_path(dpath); 767 } 768 } 769 770 } 771 772 static void 773 siis_phy_check_events(device_t dev) 774 { 775 struct siis_channel *ch = device_get_softc(dev); 776 777 /* If we have a connection event, deal with it */ 778 if (ch->pm_level == 0) { 779 u_int32_t status = ATA_INL(ch->r_mem, SIIS_P_SSTS); 780 union ccb *ccb; 781 782 if (bootverbose) { 783 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 784 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 785 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) { 786 device_printf(dev, "CONNECT requested\n"); 787 } else 788 device_printf(dev, "DISCONNECT requested\n"); 789 } 790 siis_reset(dev); 791 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 792 return; 793 if (xpt_create_path(&ccb->ccb_h.path, NULL, 794 cam_sim_path(ch->sim), 795 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 796 xpt_free_ccb(ccb); 797 return; 798 } 799 xpt_rescan(ccb); 800 } 801 } 802 803 static void 804 siis_ch_intr_locked(void *data) 805 { 806 device_t dev = (device_t)data; 807 struct siis_channel *ch = device_get_softc(dev); 808 809 mtx_lock(&ch->mtx); 810 siis_ch_intr(data); 811 mtx_unlock(&ch->mtx); 812 } 813 814 static void 815 siis_ch_intr(void *data) 816 { 817 device_t dev = (device_t)data; 818 struct siis_channel *ch = device_get_softc(dev); 819 uint32_t istatus, sstatus, ctx, estatus, ok, err = 0; 820 enum siis_err_type et; 821 int i, ccs, port, tslots; 822 823 mtx_assert(&ch->mtx, MA_OWNED); 824 /* Read command statuses. */ 825 sstatus = ATA_INL(ch->r_mem, SIIS_P_SS); 826 ok = ch->rslots & ~sstatus; 827 /* Complete all successfull commands. */ 828 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 829 if ((ok >> i) & 1) 830 siis_end_transaction(&ch->slot[i], SIIS_ERR_NONE); 831 } 832 /* Do we have any other events? */ 833 if ((sstatus & SIIS_P_SS_ATTN) == 0) 834 return; 835 /* Read and clear interrupt statuses. */ 836 istatus = ATA_INL(ch->r_mem, SIIS_P_IS) & 837 (0xFFFF & ~SIIS_P_IX_COMMCOMP); 838 ATA_OUTL(ch->r_mem, SIIS_P_IS, istatus); 839 /* Process PHY events */ 840 if (istatus & SIIS_P_IX_PHYRDYCHG) 841 siis_phy_check_events(dev); 842 /* Process NOTIFY events */ 843 if (istatus & SIIS_P_IX_SDBN) 844 siis_notify_events(dev); 845 /* Process command errors */ 846 if (istatus & SIIS_P_IX_COMMERR) { 847 estatus = ATA_INL(ch->r_mem, SIIS_P_CMDERR); 848 ctx = ATA_INL(ch->r_mem, SIIS_P_CTX); 849 ccs = (ctx & SIIS_P_CTX_SLOT) >> SIIS_P_CTX_SLOT_SHIFT; 850 port = (ctx & SIIS_P_CTX_PMP) >> SIIS_P_CTX_PMP_SHIFT; 851 err = ch->rslots & sstatus; 852 //device_printf(dev, "%s ERROR ss %08x is %08x rs %08x es %d act %d port %d serr %08x\n", 853 // __func__, sstatus, istatus, ch->rslots, estatus, ccs, port, 854 // ATA_INL(ch->r_mem, SIIS_P_SERR)); 855 856 if (!ch->readlog && !ch->recovery) { 857 xpt_freeze_simq(ch->sim, ch->numrslots); 858 ch->recovery = 1; 859 } 860 if (ch->frozen) { 861 union ccb *fccb = ch->frozen; 862 ch->frozen = NULL; 863 fccb->ccb_h.status &= ~CAM_STATUS_MASK; 864 fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 865 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 866 xpt_freeze_devq(fccb->ccb_h.path, 1); 867 fccb->ccb_h.status |= CAM_DEV_QFRZN; 868 } 869 xpt_done(fccb); 870 } 871 if (estatus == SIIS_P_CMDERR_DEV || 872 estatus == SIIS_P_CMDERR_SDB || 873 estatus == SIIS_P_CMDERR_DATAFIS) { 874 tslots = ch->numtslots[port]; 875 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 876 /* XXX: requests in loading state. */ 877 if (((ch->rslots >> i) & 1) == 0) 878 continue; 879 if (ch->slot[i].ccb->ccb_h.target_id != port) 880 continue; 881 if (tslots == 0) { 882 /* Untagged operation. */ 883 if (i == ccs) 884 et = SIIS_ERR_TFE; 885 else 886 et = SIIS_ERR_INNOCENT; 887 } else { 888 /* Tagged operation. */ 889 et = SIIS_ERR_NCQ; 890 } 891 siis_end_transaction(&ch->slot[i], et); 892 } 893 /* 894 * We can't reinit port if there are some other 895 * commands active, use resume to complete them. 896 */ 897 if (ch->rslots != 0) 898 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_RESUME); 899 } else { 900 if (estatus == SIIS_P_CMDERR_SENDFIS || 901 estatus == SIIS_P_CMDERR_INCSTATE || 902 estatus == SIIS_P_CMDERR_PPE || 903 estatus == SIIS_P_CMDERR_SERVICE) { 904 et = SIIS_ERR_SATA; 905 } else 906 et = SIIS_ERR_INVALID; 907 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 908 /* XXX: requests in loading state. */ 909 if (((ch->rslots >> i) & 1) == 0) 910 continue; 911 siis_end_transaction(&ch->slot[i], et); 912 } 913 } 914 } 915 } 916 917 /* Must be called with channel locked. */ 918 static int 919 siis_check_collision(device_t dev, union ccb *ccb) 920 { 921 struct siis_channel *ch = device_get_softc(dev); 922 923 mtx_assert(&ch->mtx, MA_OWNED); 924 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 925 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 926 /* Tagged command while we have no supported tag free. */ 927 if (((~ch->oslots) & (0x7fffffff >> (31 - 928 ch->curr[ccb->ccb_h.target_id].tags))) == 0) 929 return (1); 930 } 931 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 932 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) { 933 /* Atomic command while anything active. */ 934 if (ch->numrslots != 0) 935 return (1); 936 } 937 /* We have some atomic command running. */ 938 if (ch->aslots != 0) 939 return (1); 940 return (0); 941 } 942 943 /* Must be called with channel locked. */ 944 static void 945 siis_begin_transaction(device_t dev, union ccb *ccb) 946 { 947 struct siis_channel *ch = device_get_softc(dev); 948 struct siis_slot *slot; 949 int tag, tags; 950 951 mtx_assert(&ch->mtx, MA_OWNED); 952 /* Choose empty slot. */ 953 tags = SIIS_MAX_SLOTS; 954 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 955 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) 956 tags = ch->curr[ccb->ccb_h.target_id].tags; 957 tag = fls((~ch->oslots) & (0x7fffffff >> (31 - tags))) - 1; 958 /* Occupy chosen slot. */ 959 slot = &ch->slot[tag]; 960 slot->ccb = ccb; 961 /* Update channel stats. */ 962 ch->oslots |= (1 << slot->slot); 963 ch->numrslots++; 964 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 965 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 966 ch->numtslots[ccb->ccb_h.target_id]++; 967 } 968 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 969 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) 970 ch->aslots |= (1 << slot->slot); 971 slot->dma.nsegs = 0; 972 /* If request moves data, setup and load SG list */ 973 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 974 void *buf; 975 bus_size_t size; 976 977 slot->state = SIIS_SLOT_LOADING; 978 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 979 buf = ccb->ataio.data_ptr; 980 size = ccb->ataio.dxfer_len; 981 } else { 982 buf = ccb->csio.data_ptr; 983 size = ccb->csio.dxfer_len; 984 } 985 bus_dmamap_load(ch->dma.data_tag, slot->dma.data_map, 986 buf, size, siis_dmasetprd, slot, 0); 987 } else 988 siis_execute_transaction(slot); 989 } 990 991 /* Locked by busdma engine. */ 992 static void 993 siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 994 { 995 struct siis_slot *slot = arg; 996 struct siis_channel *ch = device_get_softc(slot->dev); 997 struct siis_cmd *ctp; 998 struct siis_dma_prd *prd; 999 int i; 1000 1001 mtx_assert(&ch->mtx, MA_OWNED); 1002 if (error) { 1003 device_printf(slot->dev, "DMA load error\n"); 1004 if (!ch->readlog) 1005 xpt_freeze_simq(ch->sim, 1); 1006 siis_end_transaction(slot, SIIS_ERR_INVALID); 1007 return; 1008 } 1009 KASSERT(nsegs <= SIIS_SG_ENTRIES, ("too many DMA segment entries\n")); 1010 /* Get a piece of the workspace for this request */ 1011 ctp = (struct siis_cmd *) 1012 (ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot)); 1013 /* Fill S/G table */ 1014 if (slot->ccb->ccb_h.func_code == XPT_ATA_IO) 1015 prd = &ctp->u.ata.prd[0]; 1016 else 1017 prd = &ctp->u.atapi.prd[0]; 1018 for (i = 0; i < nsegs; i++) { 1019 prd[i].dba = htole64(segs[i].ds_addr); 1020 prd[i].dbc = htole32(segs[i].ds_len); 1021 prd[i].control = 0; 1022 } 1023 prd[nsegs - 1].control = htole32(SIIS_PRD_TRM); 1024 slot->dma.nsegs = nsegs; 1025 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1026 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ? 1027 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 1028 siis_execute_transaction(slot); 1029 } 1030 1031 /* Must be called with channel locked. */ 1032 static void 1033 siis_execute_transaction(struct siis_slot *slot) 1034 { 1035 device_t dev = slot->dev; 1036 struct siis_channel *ch = device_get_softc(dev); 1037 struct siis_cmd *ctp; 1038 union ccb *ccb = slot->ccb; 1039 u_int64_t prb_bus; 1040 1041 mtx_assert(&ch->mtx, MA_OWNED); 1042 /* Get a piece of the workspace for this request */ 1043 ctp = (struct siis_cmd *) 1044 (ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot)); 1045 ctp->control = 0; 1046 ctp->protocol_override = 0; 1047 ctp->transfer_count = 0; 1048 /* Special handling for Soft Reset command. */ 1049 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1050 if (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) { 1051 ctp->control |= htole16(SIIS_PRB_SOFT_RESET); 1052 } else { 1053 ctp->control |= htole16(SIIS_PRB_PROTOCOL_OVERRIDE); 1054 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1055 ctp->protocol_override |= 1056 htole16(SIIS_PRB_PROTO_NCQ); 1057 } 1058 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1059 ctp->protocol_override |= 1060 htole16(SIIS_PRB_PROTO_READ); 1061 } else 1062 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 1063 ctp->protocol_override |= 1064 htole16(SIIS_PRB_PROTO_WRITE); 1065 } 1066 } 1067 } else if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1068 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1069 ctp->control |= htole16(SIIS_PRB_PACKET_READ); 1070 else 1071 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) 1072 ctp->control |= htole16(SIIS_PRB_PACKET_WRITE); 1073 } 1074 /* Special handling for Soft Reset command. */ 1075 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1076 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 1077 (ccb->ataio.cmd.control & ATA_A_RESET)) { 1078 /* Kick controller into sane state */ 1079 siis_portinit(dev); 1080 } 1081 /* Setup the FIS for this request */ 1082 if (!siis_setup_fis(dev, ctp, ccb, slot->slot)) { 1083 device_printf(ch->dev, "Setting up SATA FIS failed\n"); 1084 if (!ch->readlog) 1085 xpt_freeze_simq(ch->sim, 1); 1086 siis_end_transaction(slot, SIIS_ERR_INVALID); 1087 return; 1088 } 1089 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1090 BUS_DMASYNC_PREWRITE); 1091 /* Issue command to the controller. */ 1092 slot->state = SIIS_SLOT_RUNNING; 1093 ch->rslots |= (1 << slot->slot); 1094 prb_bus = ch->dma.work_bus + 1095 SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot); 1096 ATA_OUTL(ch->r_mem, SIIS_P_CACTL(slot->slot), prb_bus); 1097 ATA_OUTL(ch->r_mem, SIIS_P_CACTH(slot->slot), prb_bus >> 32); 1098 /* Start command execution timeout */ 1099 callout_reset(&slot->timeout, (int)ccb->ccb_h.timeout * hz / 1000, 1100 (timeout_t*)siis_timeout, slot); 1101 return; 1102 } 1103 1104 /* Must be called with channel locked. */ 1105 static void 1106 siis_process_timeout(device_t dev) 1107 { 1108 struct siis_channel *ch = device_get_softc(dev); 1109 int i; 1110 1111 mtx_assert(&ch->mtx, MA_OWNED); 1112 if (!ch->readlog && !ch->recovery) { 1113 xpt_freeze_simq(ch->sim, ch->numrslots); 1114 ch->recovery = 1; 1115 } 1116 /* Handle the rest of commands. */ 1117 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1118 /* Do we have a running request on slot? */ 1119 if (ch->slot[i].state < SIIS_SLOT_RUNNING) 1120 continue; 1121 siis_end_transaction(&ch->slot[i], SIIS_ERR_TIMEOUT); 1122 } 1123 } 1124 1125 /* Must be called with channel locked. */ 1126 static void 1127 siis_rearm_timeout(device_t dev) 1128 { 1129 struct siis_channel *ch = device_get_softc(dev); 1130 int i; 1131 1132 mtx_assert(&ch->mtx, MA_OWNED); 1133 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1134 struct siis_slot *slot = &ch->slot[i]; 1135 1136 /* Do we have a running request on slot? */ 1137 if (slot->state < SIIS_SLOT_RUNNING) 1138 continue; 1139 if ((ch->toslots & (1 << i)) == 0) 1140 continue; 1141 callout_reset(&slot->timeout, 1142 (int)slot->ccb->ccb_h.timeout * hz / 1000, 1143 (timeout_t*)siis_timeout, slot); 1144 } 1145 } 1146 1147 /* Locked by callout mechanism. */ 1148 static void 1149 siis_timeout(struct siis_slot *slot) 1150 { 1151 device_t dev = slot->dev; 1152 struct siis_channel *ch = device_get_softc(dev); 1153 1154 mtx_assert(&ch->mtx, MA_OWNED); 1155 /* Check for stale timeout. */ 1156 if (slot->state < SIIS_SLOT_RUNNING) 1157 return; 1158 device_printf(dev, "Timeout on slot %d\n", slot->slot); 1159 device_printf(dev, "%s is %08x ss %08x rs %08x es %08x sts %08x serr %08x\n", 1160 __func__, ATA_INL(ch->r_mem, SIIS_P_IS), 1161 ATA_INL(ch->r_mem, SIIS_P_SS), ch->rslots, 1162 ATA_INL(ch->r_mem, SIIS_P_CMDERR), ATA_INL(ch->r_mem, SIIS_P_STS), 1163 ATA_INL(ch->r_mem, SIIS_P_SERR)); 1164 1165 if (ch->toslots == 0) 1166 xpt_freeze_simq(ch->sim, 1); 1167 ch->toslots |= (1 << slot->slot); 1168 if ((ch->rslots & ~ch->toslots) == 0) 1169 siis_process_timeout(dev); 1170 else 1171 device_printf(dev, " ... waiting for slots %08x\n", 1172 ch->rslots & ~ch->toslots); 1173 } 1174 1175 /* Must be called with channel locked. */ 1176 static void 1177 siis_end_transaction(struct siis_slot *slot, enum siis_err_type et) 1178 { 1179 device_t dev = slot->dev; 1180 struct siis_channel *ch = device_get_softc(dev); 1181 union ccb *ccb = slot->ccb; 1182 1183 mtx_assert(&ch->mtx, MA_OWNED); 1184 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1185 BUS_DMASYNC_POSTWRITE); 1186 /* Read result registers to the result struct 1187 * May be incorrect if several commands finished same time, 1188 * so read only when sure or have to. 1189 */ 1190 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1191 struct ata_res *res = &ccb->ataio.res; 1192 if ((et == SIIS_ERR_TFE) || 1193 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) { 1194 int offs = SIIS_P_LRAM_SLOT(slot->slot) + 8; 1195 1196 res->status = ATA_INB(ch->r_mem, offs + 2); 1197 res->error = ATA_INB(ch->r_mem, offs + 3); 1198 res->lba_low = ATA_INB(ch->r_mem, offs + 4); 1199 res->lba_mid = ATA_INB(ch->r_mem, offs + 5); 1200 res->lba_high = ATA_INB(ch->r_mem, offs + 6); 1201 res->device = ATA_INB(ch->r_mem, offs + 7); 1202 res->lba_low_exp = ATA_INB(ch->r_mem, offs + 8); 1203 res->lba_mid_exp = ATA_INB(ch->r_mem, offs + 9); 1204 res->lba_high_exp = ATA_INB(ch->r_mem, offs + 10); 1205 res->sector_count = ATA_INB(ch->r_mem, offs + 12); 1206 res->sector_count_exp = ATA_INB(ch->r_mem, offs + 13); 1207 } else 1208 bzero(res, sizeof(*res)); 1209 } 1210 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1211 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1212 (ccb->ccb_h.flags & CAM_DIR_IN) ? 1213 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 1214 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map); 1215 } 1216 /* Set proper result status. */ 1217 if (et != SIIS_ERR_NONE || ch->recovery) { 1218 ch->eslots |= (1 << slot->slot); 1219 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1220 } 1221 /* In case of error, freeze device for proper recovery. */ 1222 if (et != SIIS_ERR_NONE && 1223 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 1224 xpt_freeze_devq(ccb->ccb_h.path, 1); 1225 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1226 } 1227 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 1228 switch (et) { 1229 case SIIS_ERR_NONE: 1230 ccb->ccb_h.status |= CAM_REQ_CMP; 1231 if (ccb->ccb_h.func_code == XPT_SCSI_IO) 1232 ccb->csio.scsi_status = SCSI_STATUS_OK; 1233 break; 1234 case SIIS_ERR_INVALID: 1235 ch->fatalerr = 1; 1236 ccb->ccb_h.status |= CAM_REQ_INVALID; 1237 break; 1238 case SIIS_ERR_INNOCENT: 1239 ccb->ccb_h.status |= CAM_REQUEUE_REQ; 1240 break; 1241 case SIIS_ERR_TFE: 1242 case SIIS_ERR_NCQ: 1243 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1244 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1245 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1246 } else { 1247 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; 1248 } 1249 break; 1250 case SIIS_ERR_SATA: 1251 ch->fatalerr = 1; 1252 ccb->ccb_h.status |= CAM_UNCOR_PARITY; 1253 break; 1254 case SIIS_ERR_TIMEOUT: 1255 ch->fatalerr = 1; 1256 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 1257 break; 1258 default: 1259 ccb->ccb_h.status |= CAM_REQ_CMP_ERR; 1260 } 1261 /* Free slot. */ 1262 ch->oslots &= ~(1 << slot->slot); 1263 ch->rslots &= ~(1 << slot->slot); 1264 ch->aslots &= ~(1 << slot->slot); 1265 if (et != SIIS_ERR_TIMEOUT) { 1266 if (ch->toslots == (1 << slot->slot)) 1267 xpt_release_simq(ch->sim, TRUE); 1268 ch->toslots &= ~(1 << slot->slot); 1269 } 1270 slot->state = SIIS_SLOT_EMPTY; 1271 slot->ccb = NULL; 1272 /* Update channel stats. */ 1273 ch->numrslots--; 1274 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1275 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1276 ch->numtslots[ccb->ccb_h.target_id]--; 1277 } 1278 /* If it was our READ LOG command - process it. */ 1279 if (ch->readlog) { 1280 siis_process_read_log(dev, ccb); 1281 /* If it was NCQ command error, put result on hold. */ 1282 } else if (et == SIIS_ERR_NCQ) { 1283 ch->hold[slot->slot] = ccb; 1284 ch->numhslots++; 1285 } else 1286 xpt_done(ccb); 1287 /* Unfreeze frozen command. */ 1288 if (ch->frozen && !siis_check_collision(dev, ch->frozen)) { 1289 union ccb *fccb = ch->frozen; 1290 ch->frozen = NULL; 1291 siis_begin_transaction(dev, fccb); 1292 xpt_release_simq(ch->sim, TRUE); 1293 } 1294 /* If we have no other active commands, ... */ 1295 if (ch->rslots == 0) { 1296 /* if there were timeouts or fatal error - reset port. */ 1297 if (ch->toslots != 0 || ch->fatalerr) { 1298 siis_reset(dev); 1299 } else { 1300 /* if we have slots in error, we can reinit port. */ 1301 if (ch->eslots != 0) 1302 siis_portinit(dev); 1303 /* if there commands on hold, we can do READ LOG. */ 1304 if (!ch->readlog && ch->numhslots) 1305 siis_issue_read_log(dev); 1306 } 1307 /* If all the reset of commands are in timeout - abort them. */ 1308 } else if ((ch->rslots & ~ch->toslots) == 0 && 1309 et != SIIS_ERR_TIMEOUT) 1310 siis_rearm_timeout(dev); 1311 } 1312 1313 static void 1314 siis_issue_read_log(device_t dev) 1315 { 1316 struct siis_channel *ch = device_get_softc(dev); 1317 union ccb *ccb; 1318 struct ccb_ataio *ataio; 1319 int i; 1320 1321 /* Find some holden command. */ 1322 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1323 if (ch->hold[i]) 1324 break; 1325 } 1326 if (i == SIIS_MAX_SLOTS) 1327 return; 1328 ch->readlog = 1; 1329 ccb = xpt_alloc_ccb_nowait(); 1330 if (ccb == NULL) { 1331 device_printf(dev, "Unable allocate READ LOG command"); 1332 return; /* XXX */ 1333 } 1334 ccb->ccb_h = ch->hold[i]->ccb_h; /* Reuse old header. */ 1335 ccb->ccb_h.func_code = XPT_ATA_IO; 1336 ccb->ccb_h.flags = CAM_DIR_IN; 1337 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 1338 ataio = &ccb->ataio; 1339 ataio->data_ptr = malloc(512, M_SIIS, M_NOWAIT); 1340 if (ataio->data_ptr == NULL) { 1341 xpt_free_ccb(ccb); 1342 device_printf(dev, "Unable allocate memory for READ LOG command"); 1343 return; /* XXX */ 1344 } 1345 ataio->dxfer_len = 512; 1346 bzero(&ataio->cmd, sizeof(ataio->cmd)); 1347 ataio->cmd.flags = CAM_ATAIO_48BIT; 1348 ataio->cmd.command = 0x2F; /* READ LOG EXT */ 1349 ataio->cmd.sector_count = 1; 1350 ataio->cmd.sector_count_exp = 0; 1351 ataio->cmd.lba_low = 0x10; 1352 ataio->cmd.lba_mid = 0; 1353 ataio->cmd.lba_mid_exp = 0; 1354 siis_begin_transaction(dev, ccb); 1355 } 1356 1357 static void 1358 siis_process_read_log(device_t dev, union ccb *ccb) 1359 { 1360 struct siis_channel *ch = device_get_softc(dev); 1361 uint8_t *data; 1362 struct ata_res *res; 1363 int i; 1364 1365 ch->readlog = 0; 1366 data = ccb->ataio.data_ptr; 1367 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && 1368 (data[0] & 0x80) == 0) { 1369 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1370 if (!ch->hold[i]) 1371 continue; 1372 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) 1373 continue; 1374 if ((data[0] & 0x1F) == i) { 1375 res = &ch->hold[i]->ataio.res; 1376 res->status = data[2]; 1377 res->error = data[3]; 1378 res->lba_low = data[4]; 1379 res->lba_mid = data[5]; 1380 res->lba_high = data[6]; 1381 res->device = data[7]; 1382 res->lba_low_exp = data[8]; 1383 res->lba_mid_exp = data[9]; 1384 res->lba_high_exp = data[10]; 1385 res->sector_count = data[12]; 1386 res->sector_count_exp = data[13]; 1387 } else { 1388 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1389 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ; 1390 } 1391 xpt_done(ch->hold[i]); 1392 ch->hold[i] = NULL; 1393 ch->numhslots--; 1394 } 1395 } else { 1396 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 1397 device_printf(dev, "Error while READ LOG EXT\n"); 1398 else if ((data[0] & 0x80) == 0) { 1399 device_printf(dev, "Non-queued command error in READ LOG EXT\n"); 1400 } 1401 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1402 if (!ch->hold[i]) 1403 continue; 1404 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) 1405 continue; 1406 xpt_done(ch->hold[i]); 1407 ch->hold[i] = NULL; 1408 ch->numhslots--; 1409 } 1410 } 1411 free(ccb->ataio.data_ptr, M_SIIS); 1412 xpt_free_ccb(ccb); 1413 } 1414 1415 static void 1416 siis_portinit(device_t dev) 1417 { 1418 struct siis_channel *ch = device_get_softc(dev); 1419 int i; 1420 1421 ch->eslots = 0; 1422 ch->recovery = 0; 1423 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_RESUME); 1424 for (i = 0; i < 16; i++) { 1425 ATA_OUTL(ch->r_mem, SIIS_P_PMPSTS(i), 0), 1426 ATA_OUTL(ch->r_mem, SIIS_P_PMPQACT(i), 0); 1427 } 1428 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_INIT); 1429 siis_wait_ready(dev, 1000); 1430 } 1431 1432 static int 1433 siis_devreset(device_t dev) 1434 { 1435 struct siis_channel *ch = device_get_softc(dev); 1436 int timeout = 0; 1437 uint32_t val; 1438 1439 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_DEV_RESET); 1440 while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) & 1441 SIIS_P_CTL_DEV_RESET) != 0) { 1442 DELAY(1000); 1443 if (timeout++ > 100) { 1444 device_printf(dev, "device reset stuck (timeout %dms) " 1445 "status = %08x\n", timeout, val); 1446 return (EBUSY); 1447 } 1448 } 1449 return (0); 1450 } 1451 1452 static int 1453 siis_wait_ready(device_t dev, int t) 1454 { 1455 struct siis_channel *ch = device_get_softc(dev); 1456 int timeout = 0; 1457 uint32_t val; 1458 1459 while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) & 1460 SIIS_P_CTL_READY) == 0) { 1461 DELAY(1000); 1462 if (timeout++ > t) { 1463 device_printf(dev, "port is not ready (timeout %dms) " 1464 "status = %08x\n", t, val); 1465 return (EBUSY); 1466 } 1467 } 1468 return (0); 1469 } 1470 1471 static void 1472 siis_reset(device_t dev) 1473 { 1474 struct siis_channel *ch = device_get_softc(dev); 1475 int i, retry = 0, sata_rev; 1476 uint32_t val; 1477 1478 xpt_freeze_simq(ch->sim, 1); 1479 if (bootverbose) 1480 device_printf(dev, "SIIS reset...\n"); 1481 if (!ch->readlog && !ch->recovery) 1482 xpt_freeze_simq(ch->sim, ch->numrslots); 1483 /* Requeue frozen command. */ 1484 if (ch->frozen) { 1485 union ccb *fccb = ch->frozen; 1486 ch->frozen = NULL; 1487 fccb->ccb_h.status &= ~CAM_STATUS_MASK; 1488 fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1489 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1490 xpt_freeze_devq(fccb->ccb_h.path, 1); 1491 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1492 } 1493 xpt_done(fccb); 1494 } 1495 /* Requeue all running commands. */ 1496 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1497 /* Do we have a running request on slot? */ 1498 if (ch->slot[i].state < SIIS_SLOT_RUNNING) 1499 continue; 1500 /* XXX; Commands in loading state. */ 1501 siis_end_transaction(&ch->slot[i], SIIS_ERR_INNOCENT); 1502 } 1503 /* Finish all holden commands as-is. */ 1504 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1505 if (!ch->hold[i]) 1506 continue; 1507 xpt_done(ch->hold[i]); 1508 ch->hold[i] = NULL; 1509 ch->numhslots--; 1510 } 1511 if (ch->toslots != 0) 1512 xpt_release_simq(ch->sim, TRUE); 1513 ch->eslots = 0; 1514 ch->recovery = 0; 1515 ch->toslots = 0; 1516 ch->fatalerr = 0; 1517 /* Disable port interrupts */ 1518 ATA_OUTL(ch->r_mem, SIIS_P_IECLR, 0x0000FFFF); 1519 /* Set speed limit. */ 1520 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision; 1521 if (sata_rev == 1) 1522 val = ATA_SC_SPD_SPEED_GEN1; 1523 else if (sata_rev == 2) 1524 val = ATA_SC_SPD_SPEED_GEN2; 1525 else if (sata_rev == 3) 1526 val = ATA_SC_SPD_SPEED_GEN3; 1527 else 1528 val = 0; 1529 ATA_OUTL(ch->r_mem, SIIS_P_SCTL, 1530 ATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 : 1531 (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))); 1532 retry: 1533 siis_devreset(dev); 1534 /* Reset and reconnect PHY, */ 1535 if (!siis_sata_connect(ch)) { 1536 ch->devices = 0; 1537 /* Enable port interrupts */ 1538 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); 1539 if (bootverbose) 1540 device_printf(dev, 1541 "SIIS reset done: phy reset found no device\n"); 1542 /* Tell the XPT about the event */ 1543 xpt_async(AC_BUS_RESET, ch->path, NULL); 1544 xpt_release_simq(ch->sim, TRUE); 1545 return; 1546 } 1547 /* Wait for clearing busy status. */ 1548 if (siis_wait_ready(dev, 10000)) { 1549 device_printf(dev, "device ready timeout\n"); 1550 if (!retry) { 1551 device_printf(dev, "trying full port reset ...\n"); 1552 /* Get port to the reset state. */ 1553 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET); 1554 DELAY(10000); 1555 /* Get port out of reset state. */ 1556 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET); 1557 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT); 1558 if (ch->pm_present) 1559 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); 1560 else 1561 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); 1562 siis_wait_ready(dev, 5000); 1563 retry = 1; 1564 goto retry; 1565 } 1566 } 1567 ch->devices = 1; 1568 /* Enable port interrupts */ 1569 ATA_OUTL(ch->r_mem, SIIS_P_IS, 0xFFFFFFFF); 1570 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); 1571 if (bootverbose) 1572 device_printf(dev, "SIIS reset done: devices=%08x\n", ch->devices); 1573 /* Tell the XPT about the event */ 1574 xpt_async(AC_BUS_RESET, ch->path, NULL); 1575 xpt_release_simq(ch->sim, TRUE); 1576 } 1577 1578 static int 1579 siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag) 1580 { 1581 struct siis_channel *ch = device_get_softc(dev); 1582 u_int8_t *fis = &ctp->fis[0]; 1583 1584 bzero(fis, 24); 1585 fis[0] = 0x27; /* host to device */ 1586 fis[1] = (ccb->ccb_h.target_id & 0x0f); 1587 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1588 fis[1] |= 0x80; 1589 fis[2] = ATA_PACKET_CMD; 1590 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 1591 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA) 1592 fis[3] = ATA_F_DMA; 1593 else { 1594 fis[5] = ccb->csio.dxfer_len; 1595 fis[6] = ccb->csio.dxfer_len >> 8; 1596 } 1597 fis[7] = ATA_D_LBA; 1598 fis[15] = ATA_A_4BIT; 1599 bzero(ctp->u.atapi.ccb, 16); 1600 bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1601 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes, 1602 ctp->u.atapi.ccb, ccb->csio.cdb_len); 1603 } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) { 1604 fis[1] |= 0x80; 1605 fis[2] = ccb->ataio.cmd.command; 1606 fis[3] = ccb->ataio.cmd.features; 1607 fis[4] = ccb->ataio.cmd.lba_low; 1608 fis[5] = ccb->ataio.cmd.lba_mid; 1609 fis[6] = ccb->ataio.cmd.lba_high; 1610 fis[7] = ccb->ataio.cmd.device; 1611 fis[8] = ccb->ataio.cmd.lba_low_exp; 1612 fis[9] = ccb->ataio.cmd.lba_mid_exp; 1613 fis[10] = ccb->ataio.cmd.lba_high_exp; 1614 fis[11] = ccb->ataio.cmd.features_exp; 1615 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1616 fis[12] = tag << 3; 1617 fis[13] = 0; 1618 } else { 1619 fis[12] = ccb->ataio.cmd.sector_count; 1620 fis[13] = ccb->ataio.cmd.sector_count_exp; 1621 } 1622 fis[15] = ATA_A_4BIT; 1623 } else { 1624 /* Soft reset. */ 1625 } 1626 return (20); 1627 } 1628 1629 static int 1630 siis_sata_connect(struct siis_channel *ch) 1631 { 1632 u_int32_t status; 1633 int timeout; 1634 1635 /* Wait up to 100ms for "connect well" */ 1636 for (timeout = 0; timeout < 100 ; timeout++) { 1637 status = ATA_INL(ch->r_mem, SIIS_P_SSTS); 1638 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 1639 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 1640 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) 1641 break; 1642 DELAY(1000); 1643 } 1644 if (timeout >= 100) { 1645 if (bootverbose) { 1646 device_printf(ch->dev, "SATA connect timeout status=%08x\n", 1647 status); 1648 } 1649 return (0); 1650 } 1651 if (bootverbose) { 1652 device_printf(ch->dev, "SATA connect time=%dms status=%08x\n", 1653 timeout, status); 1654 } 1655 /* Clear SATA error register */ 1656 ATA_OUTL(ch->r_mem, SIIS_P_SERR, 0xffffffff); 1657 return (1); 1658 } 1659 1660 static int 1661 siis_check_ids(device_t dev, union ccb *ccb) 1662 { 1663 1664 if (ccb->ccb_h.target_id > 15) { 1665 ccb->ccb_h.status = CAM_TID_INVALID; 1666 xpt_done(ccb); 1667 return (-1); 1668 } 1669 if (ccb->ccb_h.target_lun != 0) { 1670 ccb->ccb_h.status = CAM_LUN_INVALID; 1671 xpt_done(ccb); 1672 return (-1); 1673 } 1674 return (0); 1675 } 1676 1677 static void 1678 siisaction(struct cam_sim *sim, union ccb *ccb) 1679 { 1680 device_t dev, parent; 1681 struct siis_channel *ch; 1682 1683 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("siisaction func_code=%x\n", 1684 ccb->ccb_h.func_code)); 1685 1686 ch = (struct siis_channel *)cam_sim_softc(sim); 1687 dev = ch->dev; 1688 mtx_assert(&ch->mtx, MA_OWNED); 1689 switch (ccb->ccb_h.func_code) { 1690 /* Common cases first */ 1691 case XPT_ATA_IO: /* Execute the requested I/O operation */ 1692 case XPT_SCSI_IO: 1693 if (siis_check_ids(dev, ccb)) 1694 return; 1695 if (ch->devices == 0 || 1696 (ch->pm_present == 0 && 1697 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) { 1698 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1699 break; 1700 } 1701 /* Check for command collision. */ 1702 if (siis_check_collision(dev, ccb)) { 1703 /* Freeze command. */ 1704 ch->frozen = ccb; 1705 /* We have only one frozen slot, so freeze simq also. */ 1706 xpt_freeze_simq(ch->sim, 1); 1707 return; 1708 } 1709 siis_begin_transaction(dev, ccb); 1710 return; 1711 case XPT_EN_LUN: /* Enable LUN as a target */ 1712 case XPT_TARGET_IO: /* Execute target I/O request */ 1713 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 1714 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 1715 case XPT_ABORT: /* Abort the specified CCB */ 1716 /* XXX Implement */ 1717 ccb->ccb_h.status = CAM_REQ_INVALID; 1718 break; 1719 case XPT_SET_TRAN_SETTINGS: 1720 { 1721 struct ccb_trans_settings *cts = &ccb->cts; 1722 struct siis_device *d; 1723 1724 if (siis_check_ids(dev, ccb)) 1725 return; 1726 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 1727 d = &ch->curr[ccb->ccb_h.target_id]; 1728 else 1729 d = &ch->user[ccb->ccb_h.target_id]; 1730 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION) 1731 d->revision = cts->xport_specific.sata.revision; 1732 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE) 1733 d->mode = cts->xport_specific.sata.mode; 1734 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) 1735 d->bytecount = min(8192, cts->xport_specific.sata.bytecount); 1736 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 1737 d->tags = min(SIIS_MAX_SLOTS, cts->xport_specific.sata.tags); 1738 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) { 1739 ch->pm_present = cts->xport_specific.sata.pm_present; 1740 if (ch->pm_present) 1741 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); 1742 else 1743 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); 1744 } 1745 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 1746 d->atapi = cts->xport_specific.sata.atapi; 1747 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS) 1748 d->caps = cts->xport_specific.sata.caps; 1749 ccb->ccb_h.status = CAM_REQ_CMP; 1750 break; 1751 } 1752 case XPT_GET_TRAN_SETTINGS: 1753 /* Get default/user set transfer settings for the target */ 1754 { 1755 struct ccb_trans_settings *cts = &ccb->cts; 1756 struct siis_device *d; 1757 uint32_t status; 1758 1759 if (siis_check_ids(dev, ccb)) 1760 return; 1761 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 1762 d = &ch->curr[ccb->ccb_h.target_id]; 1763 else 1764 d = &ch->user[ccb->ccb_h.target_id]; 1765 cts->protocol = PROTO_ATA; 1766 cts->protocol_version = PROTO_VERSION_UNSPECIFIED; 1767 cts->transport = XPORT_SATA; 1768 cts->transport_version = XPORT_VERSION_UNSPECIFIED; 1769 cts->proto_specific.valid = 0; 1770 cts->xport_specific.sata.valid = 0; 1771 if (cts->type == CTS_TYPE_CURRENT_SETTINGS && 1772 (ccb->ccb_h.target_id == 15 || 1773 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) { 1774 status = ATA_INL(ch->r_mem, SIIS_P_SSTS) & ATA_SS_SPD_MASK; 1775 if (status & 0x0f0) { 1776 cts->xport_specific.sata.revision = 1777 (status & 0x0f0) >> 4; 1778 cts->xport_specific.sata.valid |= 1779 CTS_SATA_VALID_REVISION; 1780 } 1781 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D; 1782 if (ch->pm_level) 1783 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ; 1784 cts->xport_specific.sata.caps &= 1785 ch->user[ccb->ccb_h.target_id].caps; 1786 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 1787 } else { 1788 cts->xport_specific.sata.revision = d->revision; 1789 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION; 1790 cts->xport_specific.sata.caps = d->caps; 1791 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 1792 } 1793 cts->xport_specific.sata.mode = d->mode; 1794 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE; 1795 cts->xport_specific.sata.bytecount = d->bytecount; 1796 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT; 1797 cts->xport_specific.sata.pm_present = ch->pm_present; 1798 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM; 1799 cts->xport_specific.sata.tags = d->tags; 1800 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS; 1801 cts->xport_specific.sata.atapi = d->atapi; 1802 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI; 1803 ccb->ccb_h.status = CAM_REQ_CMP; 1804 break; 1805 } 1806 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 1807 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 1808 siis_reset(dev); 1809 ccb->ccb_h.status = CAM_REQ_CMP; 1810 break; 1811 case XPT_TERM_IO: /* Terminate the I/O process */ 1812 /* XXX Implement */ 1813 ccb->ccb_h.status = CAM_REQ_INVALID; 1814 break; 1815 case XPT_PATH_INQ: /* Path routing inquiry */ 1816 { 1817 struct ccb_pathinq *cpi = &ccb->cpi; 1818 1819 parent = device_get_parent(dev); 1820 cpi->version_num = 1; /* XXX??? */ 1821 cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE; 1822 cpi->hba_inquiry |= PI_SATAPM; 1823 cpi->target_sprt = 0; 1824 cpi->hba_misc = PIM_SEQSCAN; 1825 cpi->hba_eng_cnt = 0; 1826 cpi->max_target = 15; 1827 cpi->max_lun = 0; 1828 cpi->initiator_id = 0; 1829 cpi->bus_id = cam_sim_bus(sim); 1830 cpi->base_transfer_speed = 150000; 1831 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 1832 strncpy(cpi->hba_vid, "SIIS", HBA_IDLEN); 1833 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 1834 cpi->unit_number = cam_sim_unit(sim); 1835 cpi->transport = XPORT_SATA; 1836 cpi->transport_version = XPORT_VERSION_UNSPECIFIED; 1837 cpi->protocol = PROTO_ATA; 1838 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; 1839 cpi->maxio = MAXPHYS; 1840 cpi->hba_vendor = pci_get_vendor(parent); 1841 cpi->hba_device = pci_get_device(parent); 1842 cpi->hba_subvendor = pci_get_subvendor(parent); 1843 cpi->hba_subdevice = pci_get_subdevice(parent); 1844 cpi->ccb_h.status = CAM_REQ_CMP; 1845 break; 1846 } 1847 default: 1848 ccb->ccb_h.status = CAM_REQ_INVALID; 1849 break; 1850 } 1851 xpt_done(ccb); 1852 } 1853 1854 static void 1855 siispoll(struct cam_sim *sim) 1856 { 1857 struct siis_channel *ch = (struct siis_channel *)cam_sim_softc(sim); 1858 1859 siis_ch_intr(ch->dev); 1860 } 1861