1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/module.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/ata.h> 37 #include <sys/bus.h> 38 #include <sys/endian.h> 39 #include <sys/malloc.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/sbuf.h> 43 #include <sys/sema.h> 44 #include <sys/taskqueue.h> 45 #include <vm/uma.h> 46 #include <machine/stdarg.h> 47 #include <machine/resource.h> 48 #include <machine/bus.h> 49 #include <sys/rman.h> 50 #include <dev/led/led.h> 51 #include <dev/pci/pcivar.h> 52 #include <dev/pci/pcireg.h> 53 #include "siis.h" 54 55 #include <cam/cam.h> 56 #include <cam/cam_ccb.h> 57 #include <cam/cam_sim.h> 58 #include <cam/cam_xpt_sim.h> 59 #include <cam/cam_debug.h> 60 61 /* local prototypes */ 62 static int siis_setup_interrupt(device_t dev); 63 static void siis_intr(void *data); 64 static int siis_suspend(device_t dev); 65 static int siis_resume(device_t dev); 66 static int siis_ch_init(device_t dev); 67 static int siis_ch_deinit(device_t dev); 68 static int siis_ch_suspend(device_t dev); 69 static int siis_ch_resume(device_t dev); 70 static void siis_ch_intr_locked(void *data); 71 static void siis_ch_intr(void *data); 72 static void siis_ch_led(void *priv, int onoff); 73 static void siis_begin_transaction(device_t dev, union ccb *ccb); 74 static void siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error); 75 static void siis_execute_transaction(struct siis_slot *slot); 76 static void siis_timeout(void *arg); 77 static void siis_end_transaction(struct siis_slot *slot, enum siis_err_type et); 78 static int siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag); 79 static void siis_dmainit(device_t dev); 80 static void siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); 81 static void siis_dmafini(device_t dev); 82 static void siis_slotsalloc(device_t dev); 83 static void siis_slotsfree(device_t dev); 84 static void siis_reset(device_t dev); 85 static void siis_portinit(device_t dev); 86 static int siis_wait_ready(device_t dev, int t); 87 88 static int siis_sata_connect(struct siis_channel *ch); 89 90 static void siis_issue_recovery(device_t dev); 91 static void siis_process_read_log(device_t dev, union ccb *ccb); 92 static void siis_process_request_sense(device_t dev, union ccb *ccb); 93 94 static void siisaction(struct cam_sim *sim, union ccb *ccb); 95 static void siispoll(struct cam_sim *sim); 96 97 static MALLOC_DEFINE(M_SIIS, "SIIS driver", "SIIS driver data buffers"); 98 99 static struct { 100 uint32_t id; 101 const char *name; 102 int ports; 103 int quirks; 104 #define SIIS_Q_SNTF 1 105 #define SIIS_Q_NOMSI 2 106 } siis_ids[] = { 107 {0x31241095, "SiI3124", 4, 0}, 108 {0x31248086, "SiI3124", 4, 0}, 109 {0x31321095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 110 {0x02421095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 111 {0x02441095, "SiI3132", 2, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 112 {0x31311095, "SiI3131", 1, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 113 {0x35311095, "SiI3531", 1, SIIS_Q_SNTF|SIIS_Q_NOMSI}, 114 {0, NULL, 0, 0} 115 }; 116 117 #define recovery_type spriv_field0 118 #define RECOVERY_NONE 0 119 #define RECOVERY_READ_LOG 1 120 #define RECOVERY_REQUEST_SENSE 2 121 #define recovery_slot spriv_field1 122 123 static int 124 siis_probe(device_t dev) 125 { 126 char buf[64]; 127 int i; 128 uint32_t devid = pci_get_devid(dev); 129 130 for (i = 0; siis_ids[i].id != 0; i++) { 131 if (siis_ids[i].id == devid) { 132 snprintf(buf, sizeof(buf), "%s SATA controller", 133 siis_ids[i].name); 134 device_set_desc_copy(dev, buf); 135 return (BUS_PROBE_DEFAULT); 136 } 137 } 138 return (ENXIO); 139 } 140 141 static int 142 siis_attach(device_t dev) 143 { 144 struct siis_controller *ctlr = device_get_softc(dev); 145 uint32_t devid = pci_get_devid(dev); 146 device_t child; 147 int error, i, unit; 148 149 ctlr->dev = dev; 150 for (i = 0; siis_ids[i].id != 0; i++) { 151 if (siis_ids[i].id == devid) 152 break; 153 } 154 ctlr->quirks = siis_ids[i].quirks; 155 /* Global memory */ 156 ctlr->r_grid = PCIR_BAR(0); 157 if (!(ctlr->r_gmem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 158 &ctlr->r_grid, RF_ACTIVE))) 159 return (ENXIO); 160 ctlr->gctl = ATA_INL(ctlr->r_gmem, SIIS_GCTL); 161 /* Channels memory */ 162 ctlr->r_rid = PCIR_BAR(2); 163 if (!(ctlr->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 164 &ctlr->r_rid, RF_ACTIVE))) 165 return (ENXIO); 166 /* Setup our own memory management for channels. */ 167 ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem); 168 ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem); 169 ctlr->sc_iomem.rm_type = RMAN_ARRAY; 170 ctlr->sc_iomem.rm_descr = "I/O memory addresses"; 171 if ((error = rman_init(&ctlr->sc_iomem)) != 0) { 172 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 173 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 174 return (error); 175 } 176 if ((error = rman_manage_region(&ctlr->sc_iomem, 177 rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) { 178 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 179 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 180 rman_fini(&ctlr->sc_iomem); 181 return (error); 182 } 183 pci_enable_busmaster(dev); 184 /* Reset controller */ 185 siis_resume(dev); 186 /* Number of HW channels */ 187 ctlr->channels = siis_ids[i].ports; 188 /* Setup interrupts. */ 189 if (siis_setup_interrupt(dev)) { 190 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 191 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 192 rman_fini(&ctlr->sc_iomem); 193 return ENXIO; 194 } 195 /* Attach all channels on this controller */ 196 for (unit = 0; unit < ctlr->channels; unit++) { 197 child = device_add_child(dev, "siisch", -1); 198 if (child == NULL) 199 device_printf(dev, "failed to add channel device\n"); 200 else 201 device_set_ivars(child, (void *)(intptr_t)unit); 202 } 203 bus_generic_attach(dev); 204 return 0; 205 } 206 207 static int 208 siis_detach(device_t dev) 209 { 210 struct siis_controller *ctlr = device_get_softc(dev); 211 212 /* Detach & delete all children */ 213 device_delete_children(dev); 214 215 /* Free interrupts. */ 216 if (ctlr->irq.r_irq) { 217 bus_teardown_intr(dev, ctlr->irq.r_irq, 218 ctlr->irq.handle); 219 bus_release_resource(dev, SYS_RES_IRQ, 220 ctlr->irq.r_irq_rid, ctlr->irq.r_irq); 221 } 222 pci_release_msi(dev); 223 /* Free memory. */ 224 rman_fini(&ctlr->sc_iomem); 225 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 226 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem); 227 return (0); 228 } 229 230 static int 231 siis_suspend(device_t dev) 232 { 233 struct siis_controller *ctlr = device_get_softc(dev); 234 235 bus_generic_suspend(dev); 236 /* Put controller into reset state. */ 237 ctlr->gctl |= SIIS_GCTL_GRESET; 238 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl); 239 return 0; 240 } 241 242 static int 243 siis_resume(device_t dev) 244 { 245 struct siis_controller *ctlr = device_get_softc(dev); 246 247 /* Set PCIe max read request size to at least 1024 bytes */ 248 if (pci_get_max_read_req(dev) < 1024) 249 pci_set_max_read_req(dev, 1024); 250 /* Put controller into reset state. */ 251 ctlr->gctl |= SIIS_GCTL_GRESET; 252 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl); 253 DELAY(10000); 254 /* Get controller out of reset state and enable port interrupts. */ 255 ctlr->gctl &= ~(SIIS_GCTL_GRESET | SIIS_GCTL_I2C_IE); 256 ctlr->gctl |= 0x0000000f; 257 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl); 258 return (bus_generic_resume(dev)); 259 } 260 261 static int 262 siis_setup_interrupt(device_t dev) 263 { 264 struct siis_controller *ctlr = device_get_softc(dev); 265 int msi = ctlr->quirks & SIIS_Q_NOMSI ? 0 : 1; 266 267 /* Process hints. */ 268 resource_int_value(device_get_name(dev), 269 device_get_unit(dev), "msi", &msi); 270 if (msi < 0) 271 msi = 0; 272 else if (msi > 0) 273 msi = min(1, pci_msi_count(dev)); 274 /* Allocate MSI if needed/present. */ 275 if (msi && pci_alloc_msi(dev, &msi) != 0) 276 msi = 0; 277 /* Allocate all IRQs. */ 278 ctlr->irq.r_irq_rid = msi ? 1 : 0; 279 if (!(ctlr->irq.r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 280 &ctlr->irq.r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) { 281 device_printf(dev, "unable to map interrupt\n"); 282 return ENXIO; 283 } 284 if ((bus_setup_intr(dev, ctlr->irq.r_irq, ATA_INTR_FLAGS, NULL, 285 siis_intr, ctlr, &ctlr->irq.handle))) { 286 /* SOS XXX release r_irq */ 287 device_printf(dev, "unable to setup interrupt\n"); 288 return ENXIO; 289 } 290 return (0); 291 } 292 293 /* 294 * Common case interrupt handler. 295 */ 296 static void 297 siis_intr(void *data) 298 { 299 struct siis_controller *ctlr = (struct siis_controller *)data; 300 u_int32_t is; 301 void *arg; 302 int unit; 303 304 is = ATA_INL(ctlr->r_gmem, SIIS_IS); 305 for (unit = 0; unit < ctlr->channels; unit++) { 306 if ((is & SIIS_IS_PORT(unit)) != 0 && 307 (arg = ctlr->interrupt[unit].argument)) { 308 ctlr->interrupt[unit].function(arg); 309 } 310 } 311 /* Acknowledge interrupt, if MSI enabled. */ 312 if (ctlr->irq.r_irq_rid) { 313 ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, 314 ctlr->gctl | SIIS_GCTL_MSIACK); 315 } 316 } 317 318 static struct resource * 319 siis_alloc_resource(device_t dev, device_t child, int type, int *rid, 320 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 321 { 322 struct siis_controller *ctlr = device_get_softc(dev); 323 int unit = ((struct siis_channel *)device_get_softc(child))->unit; 324 struct resource *res = NULL; 325 int offset = unit << 13; 326 rman_res_t st; 327 328 switch (type) { 329 case SYS_RES_MEMORY: 330 st = rman_get_start(ctlr->r_mem); 331 res = rman_reserve_resource(&ctlr->sc_iomem, st + offset, 332 st + offset + 0x2000, 0x2000, RF_ACTIVE, child); 333 if (res) { 334 bus_space_handle_t bsh; 335 bus_space_tag_t bst; 336 bsh = rman_get_bushandle(ctlr->r_mem); 337 bst = rman_get_bustag(ctlr->r_mem); 338 bus_space_subregion(bst, bsh, offset, 0x2000, &bsh); 339 rman_set_bushandle(res, bsh); 340 rman_set_bustag(res, bst); 341 } 342 break; 343 case SYS_RES_IRQ: 344 if (*rid == ATA_IRQ_RID) 345 res = ctlr->irq.r_irq; 346 break; 347 } 348 return (res); 349 } 350 351 static int 352 siis_release_resource(device_t dev, device_t child, int type, int rid, 353 struct resource *r) 354 { 355 356 switch (type) { 357 case SYS_RES_MEMORY: 358 rman_release_resource(r); 359 return (0); 360 case SYS_RES_IRQ: 361 if (rid != ATA_IRQ_RID) 362 return ENOENT; 363 return (0); 364 } 365 return (EINVAL); 366 } 367 368 static int 369 siis_setup_intr(device_t dev, device_t child, struct resource *irq, 370 int flags, driver_filter_t *filter, driver_intr_t *function, 371 void *argument, void **cookiep) 372 { 373 struct siis_controller *ctlr = device_get_softc(dev); 374 int unit = (intptr_t)device_get_ivars(child); 375 376 if (filter != NULL) { 377 printf("siis.c: we cannot use a filter here\n"); 378 return (EINVAL); 379 } 380 ctlr->interrupt[unit].function = function; 381 ctlr->interrupt[unit].argument = argument; 382 return (0); 383 } 384 385 static int 386 siis_teardown_intr(device_t dev, device_t child, struct resource *irq, 387 void *cookie) 388 { 389 struct siis_controller *ctlr = device_get_softc(dev); 390 int unit = (intptr_t)device_get_ivars(child); 391 392 ctlr->interrupt[unit].function = NULL; 393 ctlr->interrupt[unit].argument = NULL; 394 return (0); 395 } 396 397 static int 398 siis_print_child(device_t dev, device_t child) 399 { 400 int retval; 401 402 retval = bus_print_child_header(dev, child); 403 retval += printf(" at channel %d", 404 (int)(intptr_t)device_get_ivars(child)); 405 retval += bus_print_child_footer(dev, child); 406 407 return (retval); 408 } 409 410 static int 411 siis_child_location(device_t dev, device_t child, struct sbuf *sb) 412 { 413 414 sbuf_printf(sb, "channel=%d", 415 (int)(intptr_t)device_get_ivars(child)); 416 return (0); 417 } 418 419 static bus_dma_tag_t 420 siis_get_dma_tag(device_t bus, device_t child) 421 { 422 423 return (bus_get_dma_tag(bus)); 424 } 425 426 static device_method_t siis_methods[] = { 427 DEVMETHOD(device_probe, siis_probe), 428 DEVMETHOD(device_attach, siis_attach), 429 DEVMETHOD(device_detach, siis_detach), 430 DEVMETHOD(device_suspend, siis_suspend), 431 DEVMETHOD(device_resume, siis_resume), 432 DEVMETHOD(bus_print_child, siis_print_child), 433 DEVMETHOD(bus_alloc_resource, siis_alloc_resource), 434 DEVMETHOD(bus_release_resource, siis_release_resource), 435 DEVMETHOD(bus_setup_intr, siis_setup_intr), 436 DEVMETHOD(bus_teardown_intr,siis_teardown_intr), 437 DEVMETHOD(bus_child_location, siis_child_location), 438 DEVMETHOD(bus_get_dma_tag, siis_get_dma_tag), 439 { 0, 0 } 440 }; 441 442 static driver_t siis_driver = { 443 "siis", 444 siis_methods, 445 sizeof(struct siis_controller) 446 }; 447 448 DRIVER_MODULE(siis, pci, siis_driver, 0, 0); 449 MODULE_VERSION(siis, 1); 450 MODULE_DEPEND(siis, cam, 1, 1, 1); 451 452 static int 453 siis_ch_probe(device_t dev) 454 { 455 456 device_set_desc_copy(dev, "SIIS channel"); 457 return (BUS_PROBE_DEFAULT); 458 } 459 460 static int 461 siis_ch_attach(device_t dev) 462 { 463 struct siis_controller *ctlr = device_get_softc(device_get_parent(dev)); 464 struct siis_channel *ch = device_get_softc(dev); 465 struct cam_devq *devq; 466 int rid, error, i, sata_rev = 0; 467 468 ch->dev = dev; 469 ch->unit = (intptr_t)device_get_ivars(dev); 470 ch->quirks = ctlr->quirks; 471 ch->pm_level = 0; 472 resource_int_value(device_get_name(dev), 473 device_get_unit(dev), "pm_level", &ch->pm_level); 474 resource_int_value(device_get_name(dev), 475 device_get_unit(dev), "sata_rev", &sata_rev); 476 for (i = 0; i < 16; i++) { 477 ch->user[i].revision = sata_rev; 478 ch->user[i].mode = 0; 479 ch->user[i].bytecount = 8192; 480 ch->user[i].tags = SIIS_MAX_SLOTS; 481 ch->curr[i] = ch->user[i]; 482 if (ch->pm_level) 483 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ; 484 ch->user[i].caps |= CTS_SATA_CAPS_H_AN; 485 } 486 mtx_init(&ch->mtx, "SIIS channel lock", NULL, MTX_DEF); 487 rid = ch->unit; 488 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 489 &rid, RF_ACTIVE))) 490 return (ENXIO); 491 siis_dmainit(dev); 492 siis_slotsalloc(dev); 493 siis_ch_init(dev); 494 mtx_lock(&ch->mtx); 495 rid = ATA_IRQ_RID; 496 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 497 &rid, RF_SHAREABLE | RF_ACTIVE))) { 498 device_printf(dev, "Unable to map interrupt\n"); 499 error = ENXIO; 500 goto err0; 501 } 502 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL, 503 siis_ch_intr_locked, dev, &ch->ih))) { 504 device_printf(dev, "Unable to setup interrupt\n"); 505 error = ENXIO; 506 goto err1; 507 } 508 /* Create the device queue for our SIM. */ 509 devq = cam_simq_alloc(SIIS_MAX_SLOTS); 510 if (devq == NULL) { 511 device_printf(dev, "Unable to allocate simq\n"); 512 error = ENOMEM; 513 goto err1; 514 } 515 /* Construct SIM entry */ 516 ch->sim = cam_sim_alloc(siisaction, siispoll, "siisch", ch, 517 device_get_unit(dev), &ch->mtx, 2, SIIS_MAX_SLOTS, devq); 518 if (ch->sim == NULL) { 519 cam_simq_free(devq); 520 device_printf(dev, "unable to allocate sim\n"); 521 error = ENOMEM; 522 goto err1; 523 } 524 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) { 525 device_printf(dev, "unable to register xpt bus\n"); 526 error = ENXIO; 527 goto err2; 528 } 529 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim), 530 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 531 device_printf(dev, "unable to create path\n"); 532 error = ENXIO; 533 goto err3; 534 } 535 mtx_unlock(&ch->mtx); 536 ch->led = led_create(siis_ch_led, dev, device_get_nameunit(dev)); 537 return (0); 538 539 err3: 540 xpt_bus_deregister(cam_sim_path(ch->sim)); 541 err2: 542 cam_sim_free(ch->sim, /*free_devq*/TRUE); 543 err1: 544 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 545 err0: 546 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 547 mtx_unlock(&ch->mtx); 548 mtx_destroy(&ch->mtx); 549 return (error); 550 } 551 552 static int 553 siis_ch_detach(device_t dev) 554 { 555 struct siis_channel *ch = device_get_softc(dev); 556 557 led_destroy(ch->led); 558 mtx_lock(&ch->mtx); 559 xpt_async(AC_LOST_DEVICE, ch->path, NULL); 560 xpt_free_path(ch->path); 561 xpt_bus_deregister(cam_sim_path(ch->sim)); 562 cam_sim_free(ch->sim, /*free_devq*/TRUE); 563 mtx_unlock(&ch->mtx); 564 565 bus_teardown_intr(dev, ch->r_irq, ch->ih); 566 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 567 568 siis_ch_deinit(dev); 569 siis_slotsfree(dev); 570 siis_dmafini(dev); 571 572 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 573 mtx_destroy(&ch->mtx); 574 return (0); 575 } 576 577 static int 578 siis_ch_init(device_t dev) 579 { 580 struct siis_channel *ch = device_get_softc(dev); 581 582 /* Get port out of reset state. */ 583 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET); 584 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT); 585 if (ch->pm_present) 586 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); 587 else 588 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); 589 /* Enable port interrupts */ 590 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); 591 return (0); 592 } 593 594 static int 595 siis_ch_deinit(device_t dev) 596 { 597 struct siis_channel *ch = device_get_softc(dev); 598 599 /* Put port into reset state. */ 600 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET); 601 return (0); 602 } 603 604 static int 605 siis_ch_suspend(device_t dev) 606 { 607 struct siis_channel *ch = device_get_softc(dev); 608 609 mtx_lock(&ch->mtx); 610 xpt_freeze_simq(ch->sim, 1); 611 while (ch->oslots) 612 msleep(ch, &ch->mtx, PRIBIO, "siissusp", hz/100); 613 siis_ch_deinit(dev); 614 mtx_unlock(&ch->mtx); 615 return (0); 616 } 617 618 static int 619 siis_ch_resume(device_t dev) 620 { 621 struct siis_channel *ch = device_get_softc(dev); 622 623 mtx_lock(&ch->mtx); 624 siis_ch_init(dev); 625 siis_reset(dev); 626 xpt_release_simq(ch->sim, TRUE); 627 mtx_unlock(&ch->mtx); 628 return (0); 629 } 630 631 static device_method_t siisch_methods[] = { 632 DEVMETHOD(device_probe, siis_ch_probe), 633 DEVMETHOD(device_attach, siis_ch_attach), 634 DEVMETHOD(device_detach, siis_ch_detach), 635 DEVMETHOD(device_suspend, siis_ch_suspend), 636 DEVMETHOD(device_resume, siis_ch_resume), 637 { 0, 0 } 638 }; 639 640 static driver_t siisch_driver = { 641 "siisch", 642 siisch_methods, 643 sizeof(struct siis_channel) 644 }; 645 646 DRIVER_MODULE(siisch, siis, siisch_driver, 0, 0); 647 648 static void 649 siis_ch_led(void *priv, int onoff) 650 { 651 device_t dev; 652 struct siis_channel *ch; 653 654 dev = (device_t)priv; 655 ch = device_get_softc(dev); 656 657 if (onoff == 0) 658 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_LED_ON); 659 else 660 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_LED_ON); 661 } 662 663 struct siis_dc_cb_args { 664 bus_addr_t maddr; 665 int error; 666 }; 667 668 static void 669 siis_dmainit(device_t dev) 670 { 671 struct siis_channel *ch = device_get_softc(dev); 672 struct siis_dc_cb_args dcba; 673 674 /* Command area. */ 675 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0, 676 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 677 NULL, NULL, SIIS_WORK_SIZE, 1, SIIS_WORK_SIZE, 678 0, NULL, NULL, &ch->dma.work_tag)) 679 goto error; 680 if (bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 0, 681 &ch->dma.work_map)) 682 goto error; 683 if (bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work, 684 SIIS_WORK_SIZE, siis_dmasetupc_cb, &dcba, 0) || dcba.error) { 685 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 686 goto error; 687 } 688 ch->dma.work_bus = dcba.maddr; 689 /* Data area. */ 690 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 691 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 692 NULL, NULL, 693 SIIS_SG_ENTRIES * PAGE_SIZE, SIIS_SG_ENTRIES, 0xFFFFFFFF, 694 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) { 695 goto error; 696 } 697 return; 698 699 error: 700 device_printf(dev, "WARNING - DMA initialization failed\n"); 701 siis_dmafini(dev); 702 } 703 704 static void 705 siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) 706 { 707 struct siis_dc_cb_args *dcba = (struct siis_dc_cb_args *)xsc; 708 709 if (!(dcba->error = error)) 710 dcba->maddr = segs[0].ds_addr; 711 } 712 713 static void 714 siis_dmafini(device_t dev) 715 { 716 struct siis_channel *ch = device_get_softc(dev); 717 718 if (ch->dma.data_tag) { 719 bus_dma_tag_destroy(ch->dma.data_tag); 720 ch->dma.data_tag = NULL; 721 } 722 if (ch->dma.work_bus) { 723 bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map); 724 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 725 ch->dma.work_bus = 0; 726 ch->dma.work_map = NULL; 727 ch->dma.work = NULL; 728 } 729 if (ch->dma.work_tag) { 730 bus_dma_tag_destroy(ch->dma.work_tag); 731 ch->dma.work_tag = NULL; 732 } 733 } 734 735 static void 736 siis_slotsalloc(device_t dev) 737 { 738 struct siis_channel *ch = device_get_softc(dev); 739 int i; 740 741 /* Alloc and setup command/dma slots */ 742 bzero(ch->slot, sizeof(ch->slot)); 743 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 744 struct siis_slot *slot = &ch->slot[i]; 745 746 slot->dev = dev; 747 slot->slot = i; 748 slot->state = SIIS_SLOT_EMPTY; 749 slot->prb_offset = SIIS_PRB_SIZE * i; 750 slot->ccb = NULL; 751 callout_init_mtx(&slot->timeout, &ch->mtx, 0); 752 753 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map)) 754 device_printf(ch->dev, "FAILURE - create data_map\n"); 755 } 756 } 757 758 static void 759 siis_slotsfree(device_t dev) 760 { 761 struct siis_channel *ch = device_get_softc(dev); 762 int i; 763 764 /* Free all dma slots */ 765 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 766 struct siis_slot *slot = &ch->slot[i]; 767 768 callout_drain(&slot->timeout); 769 if (slot->dma.data_map) { 770 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map); 771 slot->dma.data_map = NULL; 772 } 773 } 774 } 775 776 static void 777 siis_notify_events(device_t dev) 778 { 779 struct siis_channel *ch = device_get_softc(dev); 780 struct cam_path *dpath; 781 u_int32_t status; 782 int i; 783 784 if (ch->quirks & SIIS_Q_SNTF) { 785 status = ATA_INL(ch->r_mem, SIIS_P_SNTF); 786 ATA_OUTL(ch->r_mem, SIIS_P_SNTF, status); 787 } else { 788 /* 789 * Without SNTF we have no idea which device sent notification. 790 * If PMP is connected, assume it, else - device. 791 */ 792 status = (ch->pm_present) ? 0x8000 : 0x0001; 793 } 794 if (bootverbose) 795 device_printf(dev, "SNTF 0x%04x\n", status); 796 for (i = 0; i < 16; i++) { 797 if ((status & (1 << i)) == 0) 798 continue; 799 if (xpt_create_path(&dpath, NULL, 800 xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) { 801 xpt_async(AC_SCSI_AEN, dpath, NULL); 802 xpt_free_path(dpath); 803 } 804 } 805 806 } 807 808 static void 809 siis_phy_check_events(device_t dev) 810 { 811 struct siis_channel *ch = device_get_softc(dev); 812 813 /* If we have a connection event, deal with it */ 814 if (ch->pm_level == 0) { 815 u_int32_t status = ATA_INL(ch->r_mem, SIIS_P_SSTS); 816 union ccb *ccb; 817 818 if (bootverbose) { 819 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 820 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 821 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) { 822 device_printf(dev, "CONNECT requested\n"); 823 } else 824 device_printf(dev, "DISCONNECT requested\n"); 825 } 826 siis_reset(dev); 827 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 828 return; 829 if (xpt_create_path(&ccb->ccb_h.path, NULL, 830 cam_sim_path(ch->sim), 831 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 832 xpt_free_ccb(ccb); 833 return; 834 } 835 xpt_rescan(ccb); 836 } 837 } 838 839 static void 840 siis_ch_intr_locked(void *data) 841 { 842 device_t dev = (device_t)data; 843 struct siis_channel *ch = device_get_softc(dev); 844 845 mtx_lock(&ch->mtx); 846 siis_ch_intr(data); 847 mtx_unlock(&ch->mtx); 848 } 849 850 static void 851 siis_ch_intr(void *data) 852 { 853 device_t dev = (device_t)data; 854 struct siis_channel *ch = device_get_softc(dev); 855 uint32_t istatus, sstatus, ctx, estatus, ok; 856 enum siis_err_type et; 857 int i, ccs, port, tslots; 858 859 mtx_assert(&ch->mtx, MA_OWNED); 860 /* Read command statuses. */ 861 sstatus = ATA_INL(ch->r_mem, SIIS_P_SS); 862 ok = ch->rslots & ~sstatus; 863 /* Complete all successful commands. */ 864 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 865 if ((ok >> i) & 1) 866 siis_end_transaction(&ch->slot[i], SIIS_ERR_NONE); 867 } 868 /* Do we have any other events? */ 869 if ((sstatus & SIIS_P_SS_ATTN) == 0) 870 return; 871 /* Read and clear interrupt statuses. */ 872 istatus = ATA_INL(ch->r_mem, SIIS_P_IS) & 873 (0xFFFF & ~SIIS_P_IX_COMMCOMP); 874 ATA_OUTL(ch->r_mem, SIIS_P_IS, istatus); 875 /* Process PHY events */ 876 if (istatus & SIIS_P_IX_PHYRDYCHG) 877 siis_phy_check_events(dev); 878 /* Process NOTIFY events */ 879 if (istatus & SIIS_P_IX_SDBN) 880 siis_notify_events(dev); 881 /* Process command errors */ 882 if (istatus & SIIS_P_IX_COMMERR) { 883 estatus = ATA_INL(ch->r_mem, SIIS_P_CMDERR); 884 ctx = ATA_INL(ch->r_mem, SIIS_P_CTX); 885 ccs = (ctx & SIIS_P_CTX_SLOT) >> SIIS_P_CTX_SLOT_SHIFT; 886 port = (ctx & SIIS_P_CTX_PMP) >> SIIS_P_CTX_PMP_SHIFT; 887 //device_printf(dev, "%s ERROR ss %08x is %08x rs %08x es %d act %d port %d serr %08x\n", 888 // __func__, sstatus, istatus, ch->rslots, estatus, ccs, port, 889 // ATA_INL(ch->r_mem, SIIS_P_SERR)); 890 891 if (!ch->recoverycmd && !ch->recovery) { 892 xpt_freeze_simq(ch->sim, ch->numrslots); 893 ch->recovery = 1; 894 } 895 if (ch->frozen) { 896 union ccb *fccb = ch->frozen; 897 ch->frozen = NULL; 898 fccb->ccb_h.status &= ~CAM_STATUS_MASK; 899 fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 900 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 901 xpt_freeze_devq(fccb->ccb_h.path, 1); 902 fccb->ccb_h.status |= CAM_DEV_QFRZN; 903 } 904 xpt_done(fccb); 905 } 906 if (estatus == SIIS_P_CMDERR_DEV || 907 estatus == SIIS_P_CMDERR_SDB || 908 estatus == SIIS_P_CMDERR_DATAFIS) { 909 tslots = ch->numtslots[port]; 910 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 911 /* XXX: requests in loading state. */ 912 if (((ch->rslots >> i) & 1) == 0) 913 continue; 914 if (ch->slot[i].ccb->ccb_h.target_id != port) 915 continue; 916 if (tslots == 0) { 917 /* Untagged operation. */ 918 if (i == ccs) 919 et = SIIS_ERR_TFE; 920 else 921 et = SIIS_ERR_INNOCENT; 922 } else { 923 /* Tagged operation. */ 924 et = SIIS_ERR_NCQ; 925 } 926 siis_end_transaction(&ch->slot[i], et); 927 } 928 /* 929 * We can't reinit port if there are some other 930 * commands active, use resume to complete them. 931 */ 932 if (ch->rslots != 0 && !ch->recoverycmd) 933 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_RESUME); 934 } else { 935 if (estatus == SIIS_P_CMDERR_SENDFIS || 936 estatus == SIIS_P_CMDERR_INCSTATE || 937 estatus == SIIS_P_CMDERR_PPE || 938 estatus == SIIS_P_CMDERR_SERVICE) { 939 et = SIIS_ERR_SATA; 940 } else 941 et = SIIS_ERR_INVALID; 942 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 943 /* XXX: requests in loading state. */ 944 if (((ch->rslots >> i) & 1) == 0) 945 continue; 946 siis_end_transaction(&ch->slot[i], et); 947 } 948 } 949 } 950 } 951 952 /* Must be called with channel locked. */ 953 static int 954 siis_check_collision(device_t dev, union ccb *ccb) 955 { 956 struct siis_channel *ch = device_get_softc(dev); 957 958 mtx_assert(&ch->mtx, MA_OWNED); 959 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 960 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 961 /* Tagged command while we have no supported tag free. */ 962 if (((~ch->oslots) & (0x7fffffff >> (31 - 963 ch->curr[ccb->ccb_h.target_id].tags))) == 0) 964 return (1); 965 } 966 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 967 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) { 968 /* Atomic command while anything active. */ 969 if (ch->numrslots != 0) 970 return (1); 971 } 972 /* We have some atomic command running. */ 973 if (ch->aslots != 0) 974 return (1); 975 return (0); 976 } 977 978 /* Must be called with channel locked. */ 979 static void 980 siis_begin_transaction(device_t dev, union ccb *ccb) 981 { 982 struct siis_channel *ch = device_get_softc(dev); 983 struct siis_slot *slot; 984 int tag, tags; 985 986 mtx_assert(&ch->mtx, MA_OWNED); 987 /* Choose empty slot. */ 988 tags = SIIS_MAX_SLOTS; 989 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 990 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) 991 tags = ch->curr[ccb->ccb_h.target_id].tags; 992 tag = fls((~ch->oslots) & (0x7fffffff >> (31 - tags))) - 1; 993 /* Occupy chosen slot. */ 994 slot = &ch->slot[tag]; 995 slot->ccb = ccb; 996 /* Update channel stats. */ 997 ch->oslots |= (1 << slot->slot); 998 ch->numrslots++; 999 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1000 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1001 ch->numtslots[ccb->ccb_h.target_id]++; 1002 } 1003 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1004 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) 1005 ch->aslots |= (1 << slot->slot); 1006 slot->dma.nsegs = 0; 1007 /* If request moves data, setup and load SG list */ 1008 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1009 slot->state = SIIS_SLOT_LOADING; 1010 bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map, 1011 ccb, siis_dmasetprd, slot, 0); 1012 } else 1013 siis_execute_transaction(slot); 1014 } 1015 1016 /* Locked by busdma engine. */ 1017 static void 1018 siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1019 { 1020 struct siis_slot *slot = arg; 1021 struct siis_channel *ch = device_get_softc(slot->dev); 1022 struct siis_cmd *ctp; 1023 struct siis_dma_prd *prd; 1024 int i; 1025 1026 mtx_assert(&ch->mtx, MA_OWNED); 1027 if (error) { 1028 device_printf(slot->dev, "DMA load error\n"); 1029 if (!ch->recoverycmd) 1030 xpt_freeze_simq(ch->sim, 1); 1031 siis_end_transaction(slot, SIIS_ERR_INVALID); 1032 return; 1033 } 1034 KASSERT(nsegs <= SIIS_SG_ENTRIES, ("too many DMA segment entries\n")); 1035 slot->dma.nsegs = nsegs; 1036 if (nsegs != 0) { 1037 /* Get a piece of the workspace for this request */ 1038 ctp = (struct siis_cmd *)(ch->dma.work + slot->prb_offset); 1039 /* Fill S/G table */ 1040 if (slot->ccb->ccb_h.func_code == XPT_ATA_IO) 1041 prd = &ctp->u.ata.prd[0]; 1042 else 1043 prd = &ctp->u.atapi.prd[0]; 1044 for (i = 0; i < nsegs; i++) { 1045 prd[i].dba = htole64(segs[i].ds_addr); 1046 prd[i].dbc = htole32(segs[i].ds_len); 1047 prd[i].control = 0; 1048 } 1049 prd[nsegs - 1].control = htole32(SIIS_PRD_TRM); 1050 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1051 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ? 1052 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 1053 } 1054 siis_execute_transaction(slot); 1055 } 1056 1057 /* Must be called with channel locked. */ 1058 static void 1059 siis_execute_transaction(struct siis_slot *slot) 1060 { 1061 device_t dev = slot->dev; 1062 struct siis_channel *ch = device_get_softc(dev); 1063 struct siis_cmd *ctp; 1064 union ccb *ccb = slot->ccb; 1065 u_int64_t prb_bus; 1066 1067 mtx_assert(&ch->mtx, MA_OWNED); 1068 /* Get a piece of the workspace for this request */ 1069 ctp = (struct siis_cmd *)(ch->dma.work + slot->prb_offset); 1070 ctp->control = 0; 1071 ctp->protocol_override = 0; 1072 ctp->transfer_count = 0; 1073 /* Special handling for Soft Reset command. */ 1074 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1075 if (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) { 1076 ctp->control |= htole16(SIIS_PRB_SOFT_RESET); 1077 } else { 1078 ctp->control |= htole16(SIIS_PRB_PROTOCOL_OVERRIDE); 1079 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1080 ctp->protocol_override |= 1081 htole16(SIIS_PRB_PROTO_NCQ); 1082 } 1083 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { 1084 ctp->protocol_override |= 1085 htole16(SIIS_PRB_PROTO_READ); 1086 } else 1087 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { 1088 ctp->protocol_override |= 1089 htole16(SIIS_PRB_PROTO_WRITE); 1090 } 1091 } 1092 } else if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1093 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1094 ctp->control |= htole16(SIIS_PRB_PACKET_READ); 1095 else 1096 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) 1097 ctp->control |= htole16(SIIS_PRB_PACKET_WRITE); 1098 } 1099 /* Special handling for Soft Reset command. */ 1100 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1101 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 1102 (ccb->ataio.cmd.control & ATA_A_RESET)) { 1103 /* Kick controller into sane state */ 1104 siis_portinit(dev); 1105 } 1106 /* Setup the FIS for this request */ 1107 if (!siis_setup_fis(dev, ctp, ccb, slot->slot)) { 1108 device_printf(ch->dev, "Setting up SATA FIS failed\n"); 1109 if (!ch->recoverycmd) 1110 xpt_freeze_simq(ch->sim, 1); 1111 siis_end_transaction(slot, SIIS_ERR_INVALID); 1112 return; 1113 } 1114 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1115 BUS_DMASYNC_PREWRITE); 1116 /* Issue command to the controller. */ 1117 slot->state = SIIS_SLOT_RUNNING; 1118 ch->rslots |= (1 << slot->slot); 1119 prb_bus = ch->dma.work_bus + slot->prb_offset; 1120 ATA_OUTL(ch->r_mem, SIIS_P_CACTL(slot->slot), prb_bus); 1121 ATA_OUTL(ch->r_mem, SIIS_P_CACTH(slot->slot), prb_bus >> 32); 1122 /* Start command execution timeout */ 1123 callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout, 0, 1124 siis_timeout, slot, 0); 1125 return; 1126 } 1127 1128 /* Must be called with channel locked. */ 1129 static void 1130 siis_process_timeout(device_t dev) 1131 { 1132 struct siis_channel *ch = device_get_softc(dev); 1133 int i; 1134 1135 mtx_assert(&ch->mtx, MA_OWNED); 1136 if (!ch->recoverycmd && !ch->recovery) { 1137 xpt_freeze_simq(ch->sim, ch->numrslots); 1138 ch->recovery = 1; 1139 } 1140 /* Handle the rest of commands. */ 1141 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1142 /* Do we have a running request on slot? */ 1143 if (ch->slot[i].state < SIIS_SLOT_RUNNING) 1144 continue; 1145 siis_end_transaction(&ch->slot[i], SIIS_ERR_TIMEOUT); 1146 } 1147 } 1148 1149 /* Must be called with channel locked. */ 1150 static void 1151 siis_rearm_timeout(device_t dev) 1152 { 1153 struct siis_channel *ch = device_get_softc(dev); 1154 int i; 1155 1156 mtx_assert(&ch->mtx, MA_OWNED); 1157 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1158 struct siis_slot *slot = &ch->slot[i]; 1159 1160 /* Do we have a running request on slot? */ 1161 if (slot->state < SIIS_SLOT_RUNNING) 1162 continue; 1163 if ((ch->toslots & (1 << i)) == 0) 1164 continue; 1165 callout_reset_sbt(&slot->timeout, 1166 SBT_1MS * slot->ccb->ccb_h.timeout, 0, 1167 siis_timeout, slot, 0); 1168 } 1169 } 1170 1171 /* Locked by callout mechanism. */ 1172 static void 1173 siis_timeout(void *arg) 1174 { 1175 struct siis_slot *slot = arg; 1176 device_t dev = slot->dev; 1177 struct siis_channel *ch = device_get_softc(dev); 1178 union ccb *ccb = slot->ccb; 1179 1180 mtx_assert(&ch->mtx, MA_OWNED); 1181 /* Check for stale timeout. */ 1182 if (slot->state < SIIS_SLOT_RUNNING) 1183 return; 1184 1185 /* Handle soft-reset timeouts without doing hard-reset. */ 1186 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1187 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 1188 (ccb->ataio.cmd.control & ATA_A_RESET)) { 1189 xpt_freeze_simq(ch->sim, ch->numrslots); 1190 siis_end_transaction(slot, SIIS_ERR_TFE); 1191 return; 1192 } 1193 1194 device_printf(dev, "Timeout on slot %d\n", slot->slot); 1195 device_printf(dev, "%s is %08x ss %08x rs %08x es %08x sts %08x serr %08x\n", 1196 __func__, ATA_INL(ch->r_mem, SIIS_P_IS), 1197 ATA_INL(ch->r_mem, SIIS_P_SS), ch->rslots, 1198 ATA_INL(ch->r_mem, SIIS_P_CMDERR), ATA_INL(ch->r_mem, SIIS_P_STS), 1199 ATA_INL(ch->r_mem, SIIS_P_SERR)); 1200 1201 if (ch->toslots == 0) 1202 xpt_freeze_simq(ch->sim, 1); 1203 ch->toslots |= (1 << slot->slot); 1204 if ((ch->rslots & ~ch->toslots) == 0) 1205 siis_process_timeout(dev); 1206 else 1207 device_printf(dev, " ... waiting for slots %08x\n", 1208 ch->rslots & ~ch->toslots); 1209 } 1210 1211 /* Must be called with channel locked. */ 1212 static void 1213 siis_end_transaction(struct siis_slot *slot, enum siis_err_type et) 1214 { 1215 device_t dev = slot->dev; 1216 struct siis_channel *ch = device_get_softc(dev); 1217 union ccb *ccb = slot->ccb; 1218 int lastto; 1219 1220 mtx_assert(&ch->mtx, MA_OWNED); 1221 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1222 BUS_DMASYNC_POSTWRITE); 1223 /* Read result registers to the result struct 1224 * May be incorrect if several commands finished same time, 1225 * so read only when sure or have to. 1226 */ 1227 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1228 struct ata_res *res = &ccb->ataio.res; 1229 if ((et == SIIS_ERR_TFE) || 1230 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) { 1231 int offs = SIIS_P_LRAM_SLOT(slot->slot) + 8; 1232 1233 res->status = ATA_INB(ch->r_mem, offs + 2); 1234 res->error = ATA_INB(ch->r_mem, offs + 3); 1235 res->lba_low = ATA_INB(ch->r_mem, offs + 4); 1236 res->lba_mid = ATA_INB(ch->r_mem, offs + 5); 1237 res->lba_high = ATA_INB(ch->r_mem, offs + 6); 1238 res->device = ATA_INB(ch->r_mem, offs + 7); 1239 res->lba_low_exp = ATA_INB(ch->r_mem, offs + 8); 1240 res->lba_mid_exp = ATA_INB(ch->r_mem, offs + 9); 1241 res->lba_high_exp = ATA_INB(ch->r_mem, offs + 10); 1242 res->sector_count = ATA_INB(ch->r_mem, offs + 12); 1243 res->sector_count_exp = ATA_INB(ch->r_mem, offs + 13); 1244 } else 1245 bzero(res, sizeof(*res)); 1246 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN && 1247 ch->numrslots == 1) { 1248 ccb->ataio.resid = ccb->ataio.dxfer_len - 1249 ATA_INL(ch->r_mem, SIIS_P_LRAM_SLOT(slot->slot) + 4); 1250 } 1251 } else { 1252 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN && 1253 ch->numrslots == 1) { 1254 ccb->csio.resid = ccb->csio.dxfer_len - 1255 ATA_INL(ch->r_mem, SIIS_P_LRAM_SLOT(slot->slot) + 4); 1256 } 1257 } 1258 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1259 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1260 (ccb->ccb_h.flags & CAM_DIR_IN) ? 1261 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 1262 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map); 1263 } 1264 /* Set proper result status. */ 1265 if (et != SIIS_ERR_NONE || ch->recovery) { 1266 ch->eslots |= (1 << slot->slot); 1267 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1268 } 1269 /* In case of error, freeze device for proper recovery. */ 1270 if (et != SIIS_ERR_NONE && (!ch->recoverycmd) && 1271 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 1272 xpt_freeze_devq(ccb->ccb_h.path, 1); 1273 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1274 } 1275 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 1276 switch (et) { 1277 case SIIS_ERR_NONE: 1278 ccb->ccb_h.status |= CAM_REQ_CMP; 1279 if (ccb->ccb_h.func_code == XPT_SCSI_IO) 1280 ccb->csio.scsi_status = SCSI_STATUS_OK; 1281 break; 1282 case SIIS_ERR_INVALID: 1283 ch->fatalerr = 1; 1284 ccb->ccb_h.status |= CAM_REQ_INVALID; 1285 break; 1286 case SIIS_ERR_INNOCENT: 1287 ccb->ccb_h.status |= CAM_REQUEUE_REQ; 1288 break; 1289 case SIIS_ERR_TFE: 1290 case SIIS_ERR_NCQ: 1291 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1292 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1293 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1294 } else { 1295 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; 1296 } 1297 break; 1298 case SIIS_ERR_SATA: 1299 ch->fatalerr = 1; 1300 ccb->ccb_h.status |= CAM_UNCOR_PARITY; 1301 break; 1302 case SIIS_ERR_TIMEOUT: 1303 ch->fatalerr = 1; 1304 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 1305 break; 1306 default: 1307 ccb->ccb_h.status |= CAM_REQ_CMP_ERR; 1308 } 1309 /* Free slot. */ 1310 ch->oslots &= ~(1 << slot->slot); 1311 ch->rslots &= ~(1 << slot->slot); 1312 ch->aslots &= ~(1 << slot->slot); 1313 slot->state = SIIS_SLOT_EMPTY; 1314 slot->ccb = NULL; 1315 /* Update channel stats. */ 1316 ch->numrslots--; 1317 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1318 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1319 ch->numtslots[ccb->ccb_h.target_id]--; 1320 } 1321 /* Cancel timeout state if request completed normally. */ 1322 if (et != SIIS_ERR_TIMEOUT) { 1323 lastto = (ch->toslots == (1 << slot->slot)); 1324 ch->toslots &= ~(1 << slot->slot); 1325 if (lastto) 1326 xpt_release_simq(ch->sim, TRUE); 1327 } 1328 /* If it was our READ LOG command - process it. */ 1329 if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) { 1330 siis_process_read_log(dev, ccb); 1331 /* If it was our REQUEST SENSE command - process it. */ 1332 } else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) { 1333 siis_process_request_sense(dev, ccb); 1334 /* If it was NCQ or ATAPI command error, put result on hold. */ 1335 } else if (et == SIIS_ERR_NCQ || 1336 ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR && 1337 (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) { 1338 ch->hold[slot->slot] = ccb; 1339 ch->numhslots++; 1340 } else 1341 xpt_done(ccb); 1342 /* If we have no other active commands, ... */ 1343 if (ch->rslots == 0) { 1344 /* if there were timeouts or fatal error - reset port. */ 1345 if (ch->toslots != 0 || ch->fatalerr) { 1346 siis_reset(dev); 1347 } else { 1348 /* if we have slots in error, we can reinit port. */ 1349 if (ch->eslots != 0) 1350 siis_portinit(dev); 1351 /* if there commands on hold, we can do recovery. */ 1352 if (!ch->recoverycmd && ch->numhslots) 1353 siis_issue_recovery(dev); 1354 } 1355 /* If all the reset of commands are in timeout - abort them. */ 1356 } else if ((ch->rslots & ~ch->toslots) == 0 && 1357 et != SIIS_ERR_TIMEOUT) 1358 siis_rearm_timeout(dev); 1359 /* Unfreeze frozen command. */ 1360 if (ch->frozen && !siis_check_collision(dev, ch->frozen)) { 1361 union ccb *fccb = ch->frozen; 1362 ch->frozen = NULL; 1363 siis_begin_transaction(dev, fccb); 1364 xpt_release_simq(ch->sim, TRUE); 1365 } 1366 } 1367 1368 static void 1369 siis_issue_recovery(device_t dev) 1370 { 1371 struct siis_channel *ch = device_get_softc(dev); 1372 union ccb *ccb; 1373 struct ccb_ataio *ataio; 1374 struct ccb_scsiio *csio; 1375 int i; 1376 1377 /* Find some held command. */ 1378 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1379 if (ch->hold[i]) 1380 break; 1381 } 1382 if (i == SIIS_MAX_SLOTS) 1383 return; 1384 ccb = xpt_alloc_ccb_nowait(); 1385 if (ccb == NULL) { 1386 device_printf(dev, "Unable to allocate recovery command\n"); 1387 completeall: 1388 /* We can't do anything -- complete held commands. */ 1389 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1390 if (ch->hold[i] == NULL) 1391 continue; 1392 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1393 ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL; 1394 xpt_done(ch->hold[i]); 1395 ch->hold[i] = NULL; 1396 ch->numhslots--; 1397 } 1398 siis_reset(dev); 1399 return; 1400 } 1401 xpt_setup_ccb(&ccb->ccb_h, ch->hold[i]->ccb_h.path, 1402 ch->hold[i]->ccb_h.pinfo.priority); 1403 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1404 /* READ LOG */ 1405 ccb->ccb_h.recovery_type = RECOVERY_READ_LOG; 1406 ccb->ccb_h.func_code = XPT_ATA_IO; 1407 ccb->ccb_h.flags = CAM_DIR_IN; 1408 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 1409 ataio = &ccb->ataio; 1410 ataio->data_ptr = malloc(512, M_SIIS, M_NOWAIT); 1411 if (ataio->data_ptr == NULL) { 1412 xpt_free_ccb(ccb); 1413 device_printf(dev, 1414 "Unable to allocate memory for READ LOG command\n"); 1415 goto completeall; 1416 } 1417 ataio->dxfer_len = 512; 1418 bzero(&ataio->cmd, sizeof(ataio->cmd)); 1419 ataio->cmd.flags = CAM_ATAIO_48BIT; 1420 ataio->cmd.command = 0x2F; /* READ LOG EXT */ 1421 ataio->cmd.sector_count = 1; 1422 ataio->cmd.sector_count_exp = 0; 1423 ataio->cmd.lba_low = 0x10; 1424 ataio->cmd.lba_mid = 0; 1425 ataio->cmd.lba_mid_exp = 0; 1426 } else { 1427 /* REQUEST SENSE */ 1428 ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE; 1429 ccb->ccb_h.recovery_slot = i; 1430 ccb->ccb_h.func_code = XPT_SCSI_IO; 1431 ccb->ccb_h.flags = CAM_DIR_IN; 1432 ccb->ccb_h.status = 0; 1433 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 1434 csio = &ccb->csio; 1435 csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data; 1436 csio->dxfer_len = ch->hold[i]->csio.sense_len; 1437 csio->cdb_len = 6; 1438 bzero(&csio->cdb_io, sizeof(csio->cdb_io)); 1439 csio->cdb_io.cdb_bytes[0] = 0x03; 1440 csio->cdb_io.cdb_bytes[4] = csio->dxfer_len; 1441 } 1442 ch->recoverycmd = 1; 1443 siis_begin_transaction(dev, ccb); 1444 } 1445 1446 static void 1447 siis_process_read_log(device_t dev, union ccb *ccb) 1448 { 1449 struct siis_channel *ch = device_get_softc(dev); 1450 uint8_t *data; 1451 struct ata_res *res; 1452 int i; 1453 1454 ch->recoverycmd = 0; 1455 data = ccb->ataio.data_ptr; 1456 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && 1457 (data[0] & 0x80) == 0) { 1458 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1459 if (!ch->hold[i]) 1460 continue; 1461 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) 1462 continue; 1463 if ((data[0] & 0x1F) == i) { 1464 res = &ch->hold[i]->ataio.res; 1465 res->status = data[2]; 1466 res->error = data[3]; 1467 res->lba_low = data[4]; 1468 res->lba_mid = data[5]; 1469 res->lba_high = data[6]; 1470 res->device = data[7]; 1471 res->lba_low_exp = data[8]; 1472 res->lba_mid_exp = data[9]; 1473 res->lba_high_exp = data[10]; 1474 res->sector_count = data[12]; 1475 res->sector_count_exp = data[13]; 1476 } else { 1477 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1478 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ; 1479 } 1480 xpt_done(ch->hold[i]); 1481 ch->hold[i] = NULL; 1482 ch->numhslots--; 1483 } 1484 } else { 1485 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 1486 device_printf(dev, "Error while READ LOG EXT\n"); 1487 else if ((data[0] & 0x80) == 0) { 1488 device_printf(dev, "Non-queued command error in READ LOG EXT\n"); 1489 } 1490 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1491 if (!ch->hold[i]) 1492 continue; 1493 if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id) 1494 continue; 1495 xpt_done(ch->hold[i]); 1496 ch->hold[i] = NULL; 1497 ch->numhslots--; 1498 } 1499 } 1500 free(ccb->ataio.data_ptr, M_SIIS); 1501 xpt_free_ccb(ccb); 1502 } 1503 1504 static void 1505 siis_process_request_sense(device_t dev, union ccb *ccb) 1506 { 1507 struct siis_channel *ch = device_get_softc(dev); 1508 int i; 1509 1510 ch->recoverycmd = 0; 1511 1512 i = ccb->ccb_h.recovery_slot; 1513 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { 1514 ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID; 1515 } else { 1516 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 1517 ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL; 1518 } 1519 xpt_done(ch->hold[i]); 1520 ch->hold[i] = NULL; 1521 ch->numhslots--; 1522 xpt_free_ccb(ccb); 1523 } 1524 1525 static void 1526 siis_portinit(device_t dev) 1527 { 1528 struct siis_channel *ch = device_get_softc(dev); 1529 int i; 1530 1531 ch->eslots = 0; 1532 ch->recovery = 0; 1533 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_RESUME); 1534 for (i = 0; i < 16; i++) { 1535 ATA_OUTL(ch->r_mem, SIIS_P_PMPSTS(i), 0), 1536 ATA_OUTL(ch->r_mem, SIIS_P_PMPQACT(i), 0); 1537 } 1538 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_INIT); 1539 siis_wait_ready(dev, 1000); 1540 } 1541 1542 static int 1543 siis_devreset(device_t dev) 1544 { 1545 struct siis_channel *ch = device_get_softc(dev); 1546 int timeout = 0; 1547 uint32_t val; 1548 1549 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_DEV_RESET); 1550 while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) & 1551 SIIS_P_CTL_DEV_RESET) != 0) { 1552 DELAY(100); 1553 if (timeout++ > 1000) { 1554 device_printf(dev, "device reset stuck " 1555 "(timeout 100ms) status = %08x\n", val); 1556 return (EBUSY); 1557 } 1558 } 1559 return (0); 1560 } 1561 1562 static int 1563 siis_wait_ready(device_t dev, int t) 1564 { 1565 struct siis_channel *ch = device_get_softc(dev); 1566 int timeout = 0; 1567 uint32_t val; 1568 1569 while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) & 1570 SIIS_P_CTL_READY) == 0) { 1571 DELAY(1000); 1572 if (timeout++ > t) { 1573 device_printf(dev, "port is not ready (timeout %dms) " 1574 "status = %08x\n", t, val); 1575 return (EBUSY); 1576 } 1577 } 1578 return (0); 1579 } 1580 1581 static void 1582 siis_reset(device_t dev) 1583 { 1584 struct siis_channel *ch = device_get_softc(dev); 1585 int i, retry = 0, sata_rev; 1586 uint32_t val; 1587 1588 xpt_freeze_simq(ch->sim, 1); 1589 if (bootverbose) 1590 device_printf(dev, "SIIS reset...\n"); 1591 if (!ch->recoverycmd && !ch->recovery) 1592 xpt_freeze_simq(ch->sim, ch->numrslots); 1593 /* Requeue frozen command. */ 1594 if (ch->frozen) { 1595 union ccb *fccb = ch->frozen; 1596 ch->frozen = NULL; 1597 fccb->ccb_h.status &= ~CAM_STATUS_MASK; 1598 fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1599 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1600 xpt_freeze_devq(fccb->ccb_h.path, 1); 1601 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1602 } 1603 xpt_done(fccb); 1604 } 1605 /* Requeue all running commands. */ 1606 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1607 /* Do we have a running request on slot? */ 1608 if (ch->slot[i].state < SIIS_SLOT_RUNNING) 1609 continue; 1610 /* XXX; Commands in loading state. */ 1611 siis_end_transaction(&ch->slot[i], SIIS_ERR_INNOCENT); 1612 } 1613 /* Finish all held commands as-is. */ 1614 for (i = 0; i < SIIS_MAX_SLOTS; i++) { 1615 if (!ch->hold[i]) 1616 continue; 1617 xpt_done(ch->hold[i]); 1618 ch->hold[i] = NULL; 1619 ch->numhslots--; 1620 } 1621 if (ch->toslots != 0) 1622 xpt_release_simq(ch->sim, TRUE); 1623 ch->eslots = 0; 1624 ch->recovery = 0; 1625 ch->toslots = 0; 1626 ch->fatalerr = 0; 1627 /* Disable port interrupts */ 1628 ATA_OUTL(ch->r_mem, SIIS_P_IECLR, 0x0000FFFF); 1629 /* Set speed limit. */ 1630 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision; 1631 if (sata_rev == 1) 1632 val = ATA_SC_SPD_SPEED_GEN1; 1633 else if (sata_rev == 2) 1634 val = ATA_SC_SPD_SPEED_GEN2; 1635 else if (sata_rev == 3) 1636 val = ATA_SC_SPD_SPEED_GEN3; 1637 else 1638 val = 0; 1639 ATA_OUTL(ch->r_mem, SIIS_P_SCTL, 1640 ATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 : 1641 (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))); 1642 retry: 1643 siis_devreset(dev); 1644 /* Reset and reconnect PHY, */ 1645 if (!siis_sata_connect(ch)) { 1646 ch->devices = 0; 1647 /* Enable port interrupts */ 1648 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); 1649 if (bootverbose) 1650 device_printf(dev, 1651 "SIIS reset done: phy reset found no device\n"); 1652 /* Tell the XPT about the event */ 1653 xpt_async(AC_BUS_RESET, ch->path, NULL); 1654 xpt_release_simq(ch->sim, TRUE); 1655 return; 1656 } 1657 /* Wait for port ready status. */ 1658 if (siis_wait_ready(dev, 1000)) { 1659 device_printf(dev, "port ready timeout\n"); 1660 if (!retry) { 1661 device_printf(dev, "trying full port reset ...\n"); 1662 /* Get port to the reset state. */ 1663 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET); 1664 DELAY(10000); 1665 /* Get port out of reset state. */ 1666 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET); 1667 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT); 1668 if (ch->pm_present) 1669 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); 1670 else 1671 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); 1672 siis_wait_ready(dev, 5000); 1673 retry = 1; 1674 goto retry; 1675 } 1676 } 1677 ch->devices = 1; 1678 /* Enable port interrupts */ 1679 ATA_OUTL(ch->r_mem, SIIS_P_IS, 0xFFFFFFFF); 1680 ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED); 1681 if (bootverbose) 1682 device_printf(dev, "SIIS reset done: devices=%08x\n", ch->devices); 1683 /* Tell the XPT about the event */ 1684 xpt_async(AC_BUS_RESET, ch->path, NULL); 1685 xpt_release_simq(ch->sim, TRUE); 1686 } 1687 1688 static int 1689 siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag) 1690 { 1691 struct siis_channel *ch = device_get_softc(dev); 1692 u_int8_t *fis = &ctp->fis[0]; 1693 1694 bzero(fis, 24); 1695 fis[0] = 0x27; /* host to device */ 1696 fis[1] = (ccb->ccb_h.target_id & 0x0f); 1697 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1698 fis[1] |= 0x80; 1699 fis[2] = ATA_PACKET_CMD; 1700 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 1701 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA) 1702 fis[3] = ATA_F_DMA; 1703 else { 1704 fis[5] = ccb->csio.dxfer_len; 1705 fis[6] = ccb->csio.dxfer_len >> 8; 1706 } 1707 fis[7] = ATA_D_LBA; 1708 fis[15] = ATA_A_4BIT; 1709 bzero(ctp->u.atapi.ccb, 16); 1710 bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1711 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes, 1712 ctp->u.atapi.ccb, ccb->csio.cdb_len); 1713 } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) { 1714 fis[1] |= 0x80; 1715 fis[2] = ccb->ataio.cmd.command; 1716 fis[3] = ccb->ataio.cmd.features; 1717 fis[4] = ccb->ataio.cmd.lba_low; 1718 fis[5] = ccb->ataio.cmd.lba_mid; 1719 fis[6] = ccb->ataio.cmd.lba_high; 1720 fis[7] = ccb->ataio.cmd.device; 1721 fis[8] = ccb->ataio.cmd.lba_low_exp; 1722 fis[9] = ccb->ataio.cmd.lba_mid_exp; 1723 fis[10] = ccb->ataio.cmd.lba_high_exp; 1724 fis[11] = ccb->ataio.cmd.features_exp; 1725 fis[12] = ccb->ataio.cmd.sector_count; 1726 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 1727 fis[12] &= 0x07; 1728 fis[12] |= tag << 3; 1729 } 1730 fis[13] = ccb->ataio.cmd.sector_count_exp; 1731 if (ccb->ataio.ata_flags & ATA_FLAG_ICC) 1732 fis[14] = ccb->ataio.icc; 1733 fis[15] = ATA_A_4BIT; 1734 if (ccb->ataio.ata_flags & ATA_FLAG_AUX) { 1735 fis[16] = ccb->ataio.aux & 0xff; 1736 fis[17] = (ccb->ataio.aux >> 8) & 0xff; 1737 fis[18] = (ccb->ataio.aux >> 16) & 0xff; 1738 fis[19] = (ccb->ataio.aux >> 24) & 0xff; 1739 } 1740 } else { 1741 /* Soft reset. */ 1742 } 1743 return (20); 1744 } 1745 1746 static int 1747 siis_sata_connect(struct siis_channel *ch) 1748 { 1749 u_int32_t status; 1750 int timeout, found = 0; 1751 1752 /* Wait up to 100ms for "connect well" */ 1753 for (timeout = 0; timeout < 1000 ; timeout++) { 1754 status = ATA_INL(ch->r_mem, SIIS_P_SSTS); 1755 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE) 1756 found = 1; 1757 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 1758 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 1759 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) 1760 break; 1761 if ((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_OFFLINE) { 1762 if (bootverbose) { 1763 device_printf(ch->dev, "SATA offline status=%08x\n", 1764 status); 1765 } 1766 return (0); 1767 } 1768 if (found == 0 && timeout >= 100) 1769 break; 1770 DELAY(100); 1771 } 1772 if (timeout >= 1000 || !found) { 1773 if (bootverbose) { 1774 device_printf(ch->dev, 1775 "SATA connect timeout time=%dus status=%08x\n", 1776 timeout * 100, status); 1777 } 1778 return (0); 1779 } 1780 if (bootverbose) { 1781 device_printf(ch->dev, "SATA connect time=%dus status=%08x\n", 1782 timeout * 100, status); 1783 } 1784 /* Clear SATA error register */ 1785 ATA_OUTL(ch->r_mem, SIIS_P_SERR, 0xffffffff); 1786 return (1); 1787 } 1788 1789 static int 1790 siis_check_ids(device_t dev, union ccb *ccb) 1791 { 1792 1793 if (ccb->ccb_h.target_id > 15) { 1794 ccb->ccb_h.status = CAM_TID_INVALID; 1795 xpt_done(ccb); 1796 return (-1); 1797 } 1798 if (ccb->ccb_h.target_lun != 0) { 1799 ccb->ccb_h.status = CAM_LUN_INVALID; 1800 xpt_done(ccb); 1801 return (-1); 1802 } 1803 return (0); 1804 } 1805 1806 static void 1807 siisaction(struct cam_sim *sim, union ccb *ccb) 1808 { 1809 device_t dev, parent; 1810 struct siis_channel *ch; 1811 1812 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("siisaction func_code=%x\n", 1813 ccb->ccb_h.func_code)); 1814 1815 ch = (struct siis_channel *)cam_sim_softc(sim); 1816 dev = ch->dev; 1817 mtx_assert(&ch->mtx, MA_OWNED); 1818 switch (ccb->ccb_h.func_code) { 1819 /* Common cases first */ 1820 case XPT_ATA_IO: /* Execute the requested I/O operation */ 1821 case XPT_SCSI_IO: 1822 if (siis_check_ids(dev, ccb)) 1823 return; 1824 if (ch->devices == 0 || 1825 (ch->pm_present == 0 && 1826 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) { 1827 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1828 break; 1829 } 1830 ccb->ccb_h.recovery_type = RECOVERY_NONE; 1831 /* Check for command collision. */ 1832 if (siis_check_collision(dev, ccb)) { 1833 /* Freeze command. */ 1834 ch->frozen = ccb; 1835 /* We have only one frozen slot, so freeze simq also. */ 1836 xpt_freeze_simq(ch->sim, 1); 1837 return; 1838 } 1839 siis_begin_transaction(dev, ccb); 1840 return; 1841 case XPT_ABORT: /* Abort the specified CCB */ 1842 /* XXX Implement */ 1843 ccb->ccb_h.status = CAM_REQ_INVALID; 1844 break; 1845 case XPT_SET_TRAN_SETTINGS: 1846 { 1847 struct ccb_trans_settings *cts = &ccb->cts; 1848 struct siis_device *d; 1849 1850 if (siis_check_ids(dev, ccb)) 1851 return; 1852 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 1853 d = &ch->curr[ccb->ccb_h.target_id]; 1854 else 1855 d = &ch->user[ccb->ccb_h.target_id]; 1856 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION) 1857 d->revision = cts->xport_specific.sata.revision; 1858 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE) 1859 d->mode = cts->xport_specific.sata.mode; 1860 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) 1861 d->bytecount = min(8192, cts->xport_specific.sata.bytecount); 1862 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 1863 d->tags = min(SIIS_MAX_SLOTS, cts->xport_specific.sata.tags); 1864 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) { 1865 ch->pm_present = cts->xport_specific.sata.pm_present; 1866 if (ch->pm_present) 1867 ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME); 1868 else 1869 ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME); 1870 } 1871 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 1872 d->atapi = cts->xport_specific.sata.atapi; 1873 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS) 1874 d->caps = cts->xport_specific.sata.caps; 1875 ccb->ccb_h.status = CAM_REQ_CMP; 1876 break; 1877 } 1878 case XPT_GET_TRAN_SETTINGS: 1879 /* Get default/user set transfer settings for the target */ 1880 { 1881 struct ccb_trans_settings *cts = &ccb->cts; 1882 struct siis_device *d; 1883 uint32_t status; 1884 1885 if (siis_check_ids(dev, ccb)) 1886 return; 1887 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 1888 d = &ch->curr[ccb->ccb_h.target_id]; 1889 else 1890 d = &ch->user[ccb->ccb_h.target_id]; 1891 cts->protocol = PROTO_UNSPECIFIED; 1892 cts->protocol_version = PROTO_VERSION_UNSPECIFIED; 1893 cts->transport = XPORT_SATA; 1894 cts->transport_version = XPORT_VERSION_UNSPECIFIED; 1895 cts->proto_specific.valid = 0; 1896 cts->xport_specific.sata.valid = 0; 1897 if (cts->type == CTS_TYPE_CURRENT_SETTINGS && 1898 (ccb->ccb_h.target_id == 15 || 1899 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) { 1900 status = ATA_INL(ch->r_mem, SIIS_P_SSTS) & ATA_SS_SPD_MASK; 1901 if (status & 0x0f0) { 1902 cts->xport_specific.sata.revision = 1903 (status & 0x0f0) >> 4; 1904 cts->xport_specific.sata.valid |= 1905 CTS_SATA_VALID_REVISION; 1906 } 1907 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D; 1908 if (ch->pm_level) 1909 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ; 1910 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN; 1911 cts->xport_specific.sata.caps &= 1912 ch->user[ccb->ccb_h.target_id].caps; 1913 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 1914 } else { 1915 cts->xport_specific.sata.revision = d->revision; 1916 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION; 1917 cts->xport_specific.sata.caps = d->caps; 1918 if (cts->type == CTS_TYPE_CURRENT_SETTINGS && 1919 (ch->quirks & SIIS_Q_SNTF) == 0) 1920 cts->xport_specific.sata.caps &= ~CTS_SATA_CAPS_H_AN; 1921 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 1922 } 1923 cts->xport_specific.sata.mode = d->mode; 1924 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE; 1925 cts->xport_specific.sata.bytecount = d->bytecount; 1926 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT; 1927 cts->xport_specific.sata.pm_present = ch->pm_present; 1928 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM; 1929 cts->xport_specific.sata.tags = d->tags; 1930 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS; 1931 cts->xport_specific.sata.atapi = d->atapi; 1932 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI; 1933 ccb->ccb_h.status = CAM_REQ_CMP; 1934 break; 1935 } 1936 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 1937 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 1938 siis_reset(dev); 1939 ccb->ccb_h.status = CAM_REQ_CMP; 1940 break; 1941 case XPT_TERM_IO: /* Terminate the I/O process */ 1942 /* XXX Implement */ 1943 ccb->ccb_h.status = CAM_REQ_INVALID; 1944 break; 1945 case XPT_PATH_INQ: /* Path routing inquiry */ 1946 { 1947 struct ccb_pathinq *cpi = &ccb->cpi; 1948 1949 parent = device_get_parent(dev); 1950 cpi->version_num = 1; /* XXX??? */ 1951 cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE; 1952 cpi->hba_inquiry |= PI_SATAPM; 1953 cpi->target_sprt = 0; 1954 cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED | PIM_ATA_EXT; 1955 cpi->hba_eng_cnt = 0; 1956 cpi->max_target = 15; 1957 cpi->max_lun = 0; 1958 cpi->initiator_id = 0; 1959 cpi->bus_id = cam_sim_bus(sim); 1960 cpi->base_transfer_speed = 150000; 1961 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 1962 strlcpy(cpi->hba_vid, "SIIS", HBA_IDLEN); 1963 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 1964 cpi->unit_number = cam_sim_unit(sim); 1965 cpi->transport = XPORT_SATA; 1966 cpi->transport_version = XPORT_VERSION_UNSPECIFIED; 1967 cpi->protocol = PROTO_ATA; 1968 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; 1969 cpi->maxio = maxphys; 1970 cpi->hba_vendor = pci_get_vendor(parent); 1971 cpi->hba_device = pci_get_device(parent); 1972 cpi->hba_subvendor = pci_get_subvendor(parent); 1973 cpi->hba_subdevice = pci_get_subdevice(parent); 1974 cpi->ccb_h.status = CAM_REQ_CMP; 1975 break; 1976 } 1977 default: 1978 ccb->ccb_h.status = CAM_REQ_INVALID; 1979 break; 1980 } 1981 xpt_done(ccb); 1982 } 1983 1984 static void 1985 siispoll(struct cam_sim *sim) 1986 { 1987 struct siis_channel *ch = (struct siis_channel *)cam_sim_softc(sim); 1988 1989 siis_ch_intr(ch->dev); 1990 } 1991