xref: /freebsd/sys/dev/siis/siis.c (revision 15c433351f54e7cd5bec8d36c8e89e6a7fa55b26)
1 /*-
2  * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification, immediately at the beginning of the file.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/module.h>
32 #include <sys/systm.h>
33 #include <sys/kernel.h>
34 #include <sys/ata.h>
35 #include <sys/bus.h>
36 #include <sys/endian.h>
37 #include <sys/malloc.h>
38 #include <sys/lock.h>
39 #include <sys/mutex.h>
40 #include <sys/sema.h>
41 #include <sys/taskqueue.h>
42 #include <vm/uma.h>
43 #include <machine/stdarg.h>
44 #include <machine/resource.h>
45 #include <machine/bus.h>
46 #include <sys/rman.h>
47 #include <dev/led/led.h>
48 #include <dev/pci/pcivar.h>
49 #include <dev/pci/pcireg.h>
50 #include "siis.h"
51 
52 #include <cam/cam.h>
53 #include <cam/cam_ccb.h>
54 #include <cam/cam_sim.h>
55 #include <cam/cam_xpt_sim.h>
56 #include <cam/cam_debug.h>
57 
58 /* local prototypes */
59 static int siis_setup_interrupt(device_t dev);
60 static void siis_intr(void *data);
61 static int siis_suspend(device_t dev);
62 static int siis_resume(device_t dev);
63 static int siis_ch_init(device_t dev);
64 static int siis_ch_deinit(device_t dev);
65 static int siis_ch_suspend(device_t dev);
66 static int siis_ch_resume(device_t dev);
67 static void siis_ch_intr_locked(void *data);
68 static void siis_ch_intr(void *data);
69 static void siis_ch_led(void *priv, int onoff);
70 static void siis_begin_transaction(device_t dev, union ccb *ccb);
71 static void siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error);
72 static void siis_execute_transaction(struct siis_slot *slot);
73 static void siis_timeout(struct siis_slot *slot);
74 static void siis_end_transaction(struct siis_slot *slot, enum siis_err_type et);
75 static int siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag);
76 static void siis_dmainit(device_t dev);
77 static void siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
78 static void siis_dmafini(device_t dev);
79 static void siis_slotsalloc(device_t dev);
80 static void siis_slotsfree(device_t dev);
81 static void siis_reset(device_t dev);
82 static void siis_portinit(device_t dev);
83 static int siis_wait_ready(device_t dev, int t);
84 
85 static int siis_sata_connect(struct siis_channel *ch);
86 
87 static void siis_issue_recovery(device_t dev);
88 static void siis_process_read_log(device_t dev, union ccb *ccb);
89 static void siis_process_request_sense(device_t dev, union ccb *ccb);
90 
91 static void siisaction(struct cam_sim *sim, union ccb *ccb);
92 static void siispoll(struct cam_sim *sim);
93 
94 static MALLOC_DEFINE(M_SIIS, "SIIS driver", "SIIS driver data buffers");
95 
96 static struct {
97 	uint32_t	id;
98 	const char	*name;
99 	int		ports;
100 	int		quirks;
101 #define SIIS_Q_SNTF	1
102 #define SIIS_Q_NOMSI	2
103 } siis_ids[] = {
104 	{0x31241095,	"SiI3124",	4,	0},
105 	{0x31248086,	"SiI3124",	4,	0},
106 	{0x31321095,	"SiI3132",	2,	SIIS_Q_SNTF|SIIS_Q_NOMSI},
107 	{0x02421095,	"SiI3132",	2,	SIIS_Q_SNTF|SIIS_Q_NOMSI},
108 	{0x02441095,	"SiI3132",	2,	SIIS_Q_SNTF|SIIS_Q_NOMSI},
109 	{0x31311095,	"SiI3131",	1,	SIIS_Q_SNTF|SIIS_Q_NOMSI},
110 	{0x35311095,	"SiI3531",	1,	SIIS_Q_SNTF|SIIS_Q_NOMSI},
111 	{0,		NULL,		0,	0}
112 };
113 
114 #define recovery_type		spriv_field0
115 #define RECOVERY_NONE		0
116 #define RECOVERY_READ_LOG	1
117 #define RECOVERY_REQUEST_SENSE	2
118 #define recovery_slot		spriv_field1
119 
120 static int
121 siis_probe(device_t dev)
122 {
123 	char buf[64];
124 	int i;
125 	uint32_t devid = pci_get_devid(dev);
126 
127 	for (i = 0; siis_ids[i].id != 0; i++) {
128 		if (siis_ids[i].id == devid) {
129 			snprintf(buf, sizeof(buf), "%s SATA controller",
130 			    siis_ids[i].name);
131 			device_set_desc_copy(dev, buf);
132 			return (BUS_PROBE_DEFAULT);
133 		}
134 	}
135 	return (ENXIO);
136 }
137 
138 static int
139 siis_attach(device_t dev)
140 {
141 	struct siis_controller *ctlr = device_get_softc(dev);
142 	uint32_t devid = pci_get_devid(dev);
143 	device_t child;
144 	int	error, i, unit;
145 
146 	ctlr->dev = dev;
147 	for (i = 0; siis_ids[i].id != 0; i++) {
148 		if (siis_ids[i].id == devid)
149 			break;
150 	}
151 	ctlr->quirks = siis_ids[i].quirks;
152 	/* Global memory */
153 	ctlr->r_grid = PCIR_BAR(0);
154 	if (!(ctlr->r_gmem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
155 	    &ctlr->r_grid, RF_ACTIVE)))
156 		return (ENXIO);
157 	ctlr->gctl = ATA_INL(ctlr->r_gmem, SIIS_GCTL);
158 	/* Channels memory */
159 	ctlr->r_rid = PCIR_BAR(2);
160 	if (!(ctlr->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
161 	    &ctlr->r_rid, RF_ACTIVE)))
162 		return (ENXIO);
163 	/* Setup our own memory management for channels. */
164 	ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem);
165 	ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem);
166 	ctlr->sc_iomem.rm_type = RMAN_ARRAY;
167 	ctlr->sc_iomem.rm_descr = "I/O memory addresses";
168 	if ((error = rman_init(&ctlr->sc_iomem)) != 0) {
169 		bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
170 		bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
171 		return (error);
172 	}
173 	if ((error = rman_manage_region(&ctlr->sc_iomem,
174 	    rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) {
175 		bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
176 		bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
177 		rman_fini(&ctlr->sc_iomem);
178 		return (error);
179 	}
180 	pci_enable_busmaster(dev);
181 	/* Reset controller */
182 	siis_resume(dev);
183 	/* Number of HW channels */
184 	ctlr->channels = siis_ids[i].ports;
185 	/* Setup interrupts. */
186 	if (siis_setup_interrupt(dev)) {
187 		bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
188 		bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
189 		rman_fini(&ctlr->sc_iomem);
190 		return ENXIO;
191 	}
192 	/* Attach all channels on this controller */
193 	for (unit = 0; unit < ctlr->channels; unit++) {
194 		child = device_add_child(dev, "siisch", -1);
195 		if (child == NULL)
196 			device_printf(dev, "failed to add channel device\n");
197 		else
198 			device_set_ivars(child, (void *)(intptr_t)unit);
199 	}
200 	bus_generic_attach(dev);
201 	return 0;
202 }
203 
204 static int
205 siis_detach(device_t dev)
206 {
207 	struct siis_controller *ctlr = device_get_softc(dev);
208 
209 	/* Detach & delete all children */
210 	device_delete_children(dev);
211 
212 	/* Free interrupts. */
213 	if (ctlr->irq.r_irq) {
214 		bus_teardown_intr(dev, ctlr->irq.r_irq,
215 		    ctlr->irq.handle);
216 		bus_release_resource(dev, SYS_RES_IRQ,
217 		    ctlr->irq.r_irq_rid, ctlr->irq.r_irq);
218 	}
219 	pci_release_msi(dev);
220 	/* Free memory. */
221 	rman_fini(&ctlr->sc_iomem);
222 	bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
223 	bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_grid, ctlr->r_gmem);
224 	return (0);
225 }
226 
227 static int
228 siis_suspend(device_t dev)
229 {
230 	struct siis_controller *ctlr = device_get_softc(dev);
231 
232 	bus_generic_suspend(dev);
233 	/* Put controller into reset state. */
234 	ctlr->gctl |= SIIS_GCTL_GRESET;
235 	ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl);
236 	return 0;
237 }
238 
239 static int
240 siis_resume(device_t dev)
241 {
242 	struct siis_controller *ctlr = device_get_softc(dev);
243 
244 	/* Set PCIe max read request size to at least 1024 bytes */
245 	if (pci_get_max_read_req(dev) < 1024)
246 		pci_set_max_read_req(dev, 1024);
247 	/* Put controller into reset state. */
248 	ctlr->gctl |= SIIS_GCTL_GRESET;
249 	ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl);
250 	DELAY(10000);
251 	/* Get controller out of reset state and enable port interrupts. */
252 	ctlr->gctl &= ~(SIIS_GCTL_GRESET | SIIS_GCTL_I2C_IE);
253 	ctlr->gctl |= 0x0000000f;
254 	ATA_OUTL(ctlr->r_gmem, SIIS_GCTL, ctlr->gctl);
255 	return (bus_generic_resume(dev));
256 }
257 
258 static int
259 siis_setup_interrupt(device_t dev)
260 {
261 	struct siis_controller *ctlr = device_get_softc(dev);
262 	int msi = ctlr->quirks & SIIS_Q_NOMSI ? 0 : 1;
263 
264 	/* Process hints. */
265 	resource_int_value(device_get_name(dev),
266 	    device_get_unit(dev), "msi", &msi);
267 	if (msi < 0)
268 		msi = 0;
269 	else if (msi > 0)
270 		msi = min(1, pci_msi_count(dev));
271 	/* Allocate MSI if needed/present. */
272 	if (msi && pci_alloc_msi(dev, &msi) != 0)
273 		msi = 0;
274 	/* Allocate all IRQs. */
275 	ctlr->irq.r_irq_rid = msi ? 1 : 0;
276 	if (!(ctlr->irq.r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
277 	    &ctlr->irq.r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) {
278 		device_printf(dev, "unable to map interrupt\n");
279 		return ENXIO;
280 	}
281 	if ((bus_setup_intr(dev, ctlr->irq.r_irq, ATA_INTR_FLAGS, NULL,
282 	    siis_intr, ctlr, &ctlr->irq.handle))) {
283 		/* SOS XXX release r_irq */
284 		device_printf(dev, "unable to setup interrupt\n");
285 		return ENXIO;
286 	}
287 	return (0);
288 }
289 
290 /*
291  * Common case interrupt handler.
292  */
293 static void
294 siis_intr(void *data)
295 {
296 	struct siis_controller *ctlr = (struct siis_controller *)data;
297 	u_int32_t is;
298 	void *arg;
299 	int unit;
300 
301 	is = ATA_INL(ctlr->r_gmem, SIIS_IS);
302 	for (unit = 0; unit < ctlr->channels; unit++) {
303 		if ((is & SIIS_IS_PORT(unit)) != 0 &&
304 		    (arg = ctlr->interrupt[unit].argument)) {
305 			ctlr->interrupt[unit].function(arg);
306 		}
307 	}
308 	/* Acknowledge interrupt, if MSI enabled. */
309 	if (ctlr->irq.r_irq_rid) {
310 		ATA_OUTL(ctlr->r_gmem, SIIS_GCTL,
311 		    ctlr->gctl | SIIS_GCTL_MSIACK);
312 	}
313 }
314 
315 static struct resource *
316 siis_alloc_resource(device_t dev, device_t child, int type, int *rid,
317 		    rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
318 {
319 	struct siis_controller *ctlr = device_get_softc(dev);
320 	int unit = ((struct siis_channel *)device_get_softc(child))->unit;
321 	struct resource *res = NULL;
322 	int offset = unit << 13;
323 	long st;
324 
325 	switch (type) {
326 	case SYS_RES_MEMORY:
327 		st = rman_get_start(ctlr->r_mem);
328 		res = rman_reserve_resource(&ctlr->sc_iomem, st + offset,
329 		    st + offset + 0x2000, 0x2000, RF_ACTIVE, child);
330 		if (res) {
331 			bus_space_handle_t bsh;
332 			bus_space_tag_t bst;
333 			bsh = rman_get_bushandle(ctlr->r_mem);
334 			bst = rman_get_bustag(ctlr->r_mem);
335 			bus_space_subregion(bst, bsh, offset, 0x2000, &bsh);
336 			rman_set_bushandle(res, bsh);
337 			rman_set_bustag(res, bst);
338 		}
339 		break;
340 	case SYS_RES_IRQ:
341 		if (*rid == ATA_IRQ_RID)
342 			res = ctlr->irq.r_irq;
343 		break;
344 	}
345 	return (res);
346 }
347 
348 static int
349 siis_release_resource(device_t dev, device_t child, int type, int rid,
350 			 struct resource *r)
351 {
352 
353 	switch (type) {
354 	case SYS_RES_MEMORY:
355 		rman_release_resource(r);
356 		return (0);
357 	case SYS_RES_IRQ:
358 		if (rid != ATA_IRQ_RID)
359 			return ENOENT;
360 		return (0);
361 	}
362 	return (EINVAL);
363 }
364 
365 static int
366 siis_setup_intr(device_t dev, device_t child, struct resource *irq,
367 		   int flags, driver_filter_t *filter, driver_intr_t *function,
368 		   void *argument, void **cookiep)
369 {
370 	struct siis_controller *ctlr = device_get_softc(dev);
371 	int unit = (intptr_t)device_get_ivars(child);
372 
373 	if (filter != NULL) {
374 		printf("siis.c: we cannot use a filter here\n");
375 		return (EINVAL);
376 	}
377 	ctlr->interrupt[unit].function = function;
378 	ctlr->interrupt[unit].argument = argument;
379 	return (0);
380 }
381 
382 static int
383 siis_teardown_intr(device_t dev, device_t child, struct resource *irq,
384 		      void *cookie)
385 {
386 	struct siis_controller *ctlr = device_get_softc(dev);
387 	int unit = (intptr_t)device_get_ivars(child);
388 
389 	ctlr->interrupt[unit].function = NULL;
390 	ctlr->interrupt[unit].argument = NULL;
391 	return (0);
392 }
393 
394 static int
395 siis_print_child(device_t dev, device_t child)
396 {
397 	int retval;
398 
399 	retval = bus_print_child_header(dev, child);
400 	retval += printf(" at channel %d",
401 	    (int)(intptr_t)device_get_ivars(child));
402 	retval += bus_print_child_footer(dev, child);
403 
404 	return (retval);
405 }
406 
407 static int
408 siis_child_location_str(device_t dev, device_t child, char *buf,
409     size_t buflen)
410 {
411 
412 	snprintf(buf, buflen, "channel=%d",
413 	    (int)(intptr_t)device_get_ivars(child));
414 	return (0);
415 }
416 
417 static bus_dma_tag_t
418 siis_get_dma_tag(device_t bus, device_t child)
419 {
420 
421 	return (bus_get_dma_tag(bus));
422 }
423 
424 devclass_t siis_devclass;
425 static device_method_t siis_methods[] = {
426 	DEVMETHOD(device_probe,     siis_probe),
427 	DEVMETHOD(device_attach,    siis_attach),
428 	DEVMETHOD(device_detach,    siis_detach),
429 	DEVMETHOD(device_suspend,   siis_suspend),
430 	DEVMETHOD(device_resume,    siis_resume),
431 	DEVMETHOD(bus_print_child,  siis_print_child),
432 	DEVMETHOD(bus_alloc_resource,       siis_alloc_resource),
433 	DEVMETHOD(bus_release_resource,     siis_release_resource),
434 	DEVMETHOD(bus_setup_intr,   siis_setup_intr),
435 	DEVMETHOD(bus_teardown_intr,siis_teardown_intr),
436 	DEVMETHOD(bus_child_location_str, siis_child_location_str),
437 	DEVMETHOD(bus_get_dma_tag,  siis_get_dma_tag),
438 	{ 0, 0 }
439 };
440 static driver_t siis_driver = {
441         "siis",
442         siis_methods,
443         sizeof(struct siis_controller)
444 };
445 DRIVER_MODULE(siis, pci, siis_driver, siis_devclass, 0, 0);
446 MODULE_VERSION(siis, 1);
447 MODULE_DEPEND(siis, cam, 1, 1, 1);
448 
449 static int
450 siis_ch_probe(device_t dev)
451 {
452 
453 	device_set_desc_copy(dev, "SIIS channel");
454 	return (BUS_PROBE_DEFAULT);
455 }
456 
457 static int
458 siis_ch_attach(device_t dev)
459 {
460 	struct siis_controller *ctlr = device_get_softc(device_get_parent(dev));
461 	struct siis_channel *ch = device_get_softc(dev);
462 	struct cam_devq *devq;
463 	int rid, error, i, sata_rev = 0;
464 
465 	ch->dev = dev;
466 	ch->unit = (intptr_t)device_get_ivars(dev);
467 	ch->quirks = ctlr->quirks;
468 	ch->pm_level = 0;
469 	resource_int_value(device_get_name(dev),
470 	    device_get_unit(dev), "pm_level", &ch->pm_level);
471 	resource_int_value(device_get_name(dev),
472 	    device_get_unit(dev), "sata_rev", &sata_rev);
473 	for (i = 0; i < 16; i++) {
474 		ch->user[i].revision = sata_rev;
475 		ch->user[i].mode = 0;
476 		ch->user[i].bytecount = 8192;
477 		ch->user[i].tags = SIIS_MAX_SLOTS;
478 		ch->curr[i] = ch->user[i];
479 		if (ch->pm_level)
480 			ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ;
481 		ch->user[i].caps |= CTS_SATA_CAPS_H_AN;
482 	}
483 	mtx_init(&ch->mtx, "SIIS channel lock", NULL, MTX_DEF);
484 	rid = ch->unit;
485 	if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
486 	    &rid, RF_ACTIVE)))
487 		return (ENXIO);
488 	siis_dmainit(dev);
489 	siis_slotsalloc(dev);
490 	siis_ch_init(dev);
491 	mtx_lock(&ch->mtx);
492 	rid = ATA_IRQ_RID;
493 	if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
494 	    &rid, RF_SHAREABLE | RF_ACTIVE))) {
495 		device_printf(dev, "Unable to map interrupt\n");
496 		error = ENXIO;
497 		goto err0;
498 	}
499 	if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL,
500 	    siis_ch_intr_locked, dev, &ch->ih))) {
501 		device_printf(dev, "Unable to setup interrupt\n");
502 		error = ENXIO;
503 		goto err1;
504 	}
505 	/* Create the device queue for our SIM. */
506 	devq = cam_simq_alloc(SIIS_MAX_SLOTS);
507 	if (devq == NULL) {
508 		device_printf(dev, "Unable to allocate simq\n");
509 		error = ENOMEM;
510 		goto err1;
511 	}
512 	/* Construct SIM entry */
513 	ch->sim = cam_sim_alloc(siisaction, siispoll, "siisch", ch,
514 	    device_get_unit(dev), &ch->mtx, 2, SIIS_MAX_SLOTS, devq);
515 	if (ch->sim == NULL) {
516 		cam_simq_free(devq);
517 		device_printf(dev, "unable to allocate sim\n");
518 		error = ENOMEM;
519 		goto err1;
520 	}
521 	if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) {
522 		device_printf(dev, "unable to register xpt bus\n");
523 		error = ENXIO;
524 		goto err2;
525 	}
526 	if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim),
527 	    CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
528 		device_printf(dev, "unable to create path\n");
529 		error = ENXIO;
530 		goto err3;
531 	}
532 	mtx_unlock(&ch->mtx);
533 	ch->led = led_create(siis_ch_led, dev, device_get_nameunit(dev));
534 	return (0);
535 
536 err3:
537 	xpt_bus_deregister(cam_sim_path(ch->sim));
538 err2:
539 	cam_sim_free(ch->sim, /*free_devq*/TRUE);
540 err1:
541 	bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
542 err0:
543 	bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
544 	mtx_unlock(&ch->mtx);
545 	mtx_destroy(&ch->mtx);
546 	return (error);
547 }
548 
549 static int
550 siis_ch_detach(device_t dev)
551 {
552 	struct siis_channel *ch = device_get_softc(dev);
553 
554 	led_destroy(ch->led);
555 	mtx_lock(&ch->mtx);
556 	xpt_async(AC_LOST_DEVICE, ch->path, NULL);
557 	xpt_free_path(ch->path);
558 	xpt_bus_deregister(cam_sim_path(ch->sim));
559 	cam_sim_free(ch->sim, /*free_devq*/TRUE);
560 	mtx_unlock(&ch->mtx);
561 
562 	bus_teardown_intr(dev, ch->r_irq, ch->ih);
563 	bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
564 
565 	siis_ch_deinit(dev);
566 	siis_slotsfree(dev);
567 	siis_dmafini(dev);
568 
569 	bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
570 	mtx_destroy(&ch->mtx);
571 	return (0);
572 }
573 
574 static int
575 siis_ch_init(device_t dev)
576 {
577 	struct siis_channel *ch = device_get_softc(dev);
578 
579 	/* Get port out of reset state. */
580 	ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET);
581 	ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT);
582 	if (ch->pm_present)
583 		ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME);
584 	else
585 		ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME);
586 	/* Enable port interrupts */
587 	ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED);
588 	return (0);
589 }
590 
591 static int
592 siis_ch_deinit(device_t dev)
593 {
594 	struct siis_channel *ch = device_get_softc(dev);
595 
596 	/* Put port into reset state. */
597 	ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET);
598 	return (0);
599 }
600 
601 static int
602 siis_ch_suspend(device_t dev)
603 {
604 	struct siis_channel *ch = device_get_softc(dev);
605 
606 	mtx_lock(&ch->mtx);
607 	xpt_freeze_simq(ch->sim, 1);
608 	while (ch->oslots)
609 		msleep(ch, &ch->mtx, PRIBIO, "siissusp", hz/100);
610 	siis_ch_deinit(dev);
611 	mtx_unlock(&ch->mtx);
612 	return (0);
613 }
614 
615 static int
616 siis_ch_resume(device_t dev)
617 {
618 	struct siis_channel *ch = device_get_softc(dev);
619 
620 	mtx_lock(&ch->mtx);
621 	siis_ch_init(dev);
622 	siis_reset(dev);
623 	xpt_release_simq(ch->sim, TRUE);
624 	mtx_unlock(&ch->mtx);
625 	return (0);
626 }
627 
628 devclass_t siisch_devclass;
629 static device_method_t siisch_methods[] = {
630 	DEVMETHOD(device_probe,     siis_ch_probe),
631 	DEVMETHOD(device_attach,    siis_ch_attach),
632 	DEVMETHOD(device_detach,    siis_ch_detach),
633 	DEVMETHOD(device_suspend,   siis_ch_suspend),
634 	DEVMETHOD(device_resume,    siis_ch_resume),
635 	{ 0, 0 }
636 };
637 static driver_t siisch_driver = {
638         "siisch",
639         siisch_methods,
640         sizeof(struct siis_channel)
641 };
642 DRIVER_MODULE(siisch, siis, siisch_driver, siis_devclass, 0, 0);
643 
644 static void
645 siis_ch_led(void *priv, int onoff)
646 {
647 	device_t dev;
648 	struct siis_channel *ch;
649 
650 	dev = (device_t)priv;
651 	ch = device_get_softc(dev);
652 
653 	if (onoff == 0)
654 		ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_LED_ON);
655 	else
656 		ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_LED_ON);
657 }
658 
659 struct siis_dc_cb_args {
660 	bus_addr_t maddr;
661 	int error;
662 };
663 
664 static void
665 siis_dmainit(device_t dev)
666 {
667 	struct siis_channel *ch = device_get_softc(dev);
668 	struct siis_dc_cb_args dcba;
669 
670 	/* Command area. */
671 	if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0,
672 	    BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
673 	    NULL, NULL, SIIS_WORK_SIZE, 1, SIIS_WORK_SIZE,
674 	    0, NULL, NULL, &ch->dma.work_tag))
675 		goto error;
676 	if (bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 0,
677 	    &ch->dma.work_map))
678 		goto error;
679 	if (bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work,
680 	    SIIS_WORK_SIZE, siis_dmasetupc_cb, &dcba, 0) || dcba.error) {
681 		bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
682 		goto error;
683 	}
684 	ch->dma.work_bus = dcba.maddr;
685 	/* Data area. */
686 	if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
687 	    BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
688 	    NULL, NULL,
689 	    SIIS_SG_ENTRIES * PAGE_SIZE * SIIS_MAX_SLOTS,
690 	    SIIS_SG_ENTRIES, 0xFFFFFFFF,
691 	    0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) {
692 		goto error;
693 	}
694 	return;
695 
696 error:
697 	device_printf(dev, "WARNING - DMA initialization failed\n");
698 	siis_dmafini(dev);
699 }
700 
701 static void
702 siis_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
703 {
704 	struct siis_dc_cb_args *dcba = (struct siis_dc_cb_args *)xsc;
705 
706 	if (!(dcba->error = error))
707 		dcba->maddr = segs[0].ds_addr;
708 }
709 
710 static void
711 siis_dmafini(device_t dev)
712 {
713 	struct siis_channel *ch = device_get_softc(dev);
714 
715 	if (ch->dma.data_tag) {
716 		bus_dma_tag_destroy(ch->dma.data_tag);
717 		ch->dma.data_tag = NULL;
718 	}
719 	if (ch->dma.work_bus) {
720 		bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map);
721 		bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
722 		ch->dma.work_bus = 0;
723 		ch->dma.work_map = NULL;
724 		ch->dma.work = NULL;
725 	}
726 	if (ch->dma.work_tag) {
727 		bus_dma_tag_destroy(ch->dma.work_tag);
728 		ch->dma.work_tag = NULL;
729 	}
730 }
731 
732 static void
733 siis_slotsalloc(device_t dev)
734 {
735 	struct siis_channel *ch = device_get_softc(dev);
736 	int i;
737 
738 	/* Alloc and setup command/dma slots */
739 	bzero(ch->slot, sizeof(ch->slot));
740 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
741 		struct siis_slot *slot = &ch->slot[i];
742 
743 		slot->dev = dev;
744 		slot->slot = i;
745 		slot->state = SIIS_SLOT_EMPTY;
746 		slot->ccb = NULL;
747 		callout_init_mtx(&slot->timeout, &ch->mtx, 0);
748 
749 		if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map))
750 			device_printf(ch->dev, "FAILURE - create data_map\n");
751 	}
752 }
753 
754 static void
755 siis_slotsfree(device_t dev)
756 {
757 	struct siis_channel *ch = device_get_softc(dev);
758 	int i;
759 
760 	/* Free all dma slots */
761 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
762 		struct siis_slot *slot = &ch->slot[i];
763 
764 		callout_drain(&slot->timeout);
765 		if (slot->dma.data_map) {
766 			bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map);
767 			slot->dma.data_map = NULL;
768 		}
769 	}
770 }
771 
772 static void
773 siis_notify_events(device_t dev)
774 {
775 	struct siis_channel *ch = device_get_softc(dev);
776 	struct cam_path *dpath;
777 	u_int32_t status;
778 	int i;
779 
780 	if (ch->quirks & SIIS_Q_SNTF) {
781 		status = ATA_INL(ch->r_mem, SIIS_P_SNTF);
782 		ATA_OUTL(ch->r_mem, SIIS_P_SNTF, status);
783 	} else {
784 		/*
785 		 * Without SNTF we have no idea which device sent notification.
786 		 * If PMP is connected, assume it, else - device.
787 		 */
788 		status = (ch->pm_present) ? 0x8000 : 0x0001;
789 	}
790 	if (bootverbose)
791 		device_printf(dev, "SNTF 0x%04x\n", status);
792 	for (i = 0; i < 16; i++) {
793 		if ((status & (1 << i)) == 0)
794 			continue;
795 		if (xpt_create_path(&dpath, NULL,
796 		    xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) {
797 			xpt_async(AC_SCSI_AEN, dpath, NULL);
798 			xpt_free_path(dpath);
799 		}
800 	}
801 
802 }
803 
804 static void
805 siis_phy_check_events(device_t dev)
806 {
807 	struct siis_channel *ch = device_get_softc(dev);
808 
809 	/* If we have a connection event, deal with it */
810 	if (ch->pm_level == 0) {
811 		u_int32_t status = ATA_INL(ch->r_mem, SIIS_P_SSTS);
812 		union ccb *ccb;
813 
814 		if (bootverbose) {
815 			if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) &&
816 			    ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) &&
817 			    ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) {
818 				device_printf(dev, "CONNECT requested\n");
819 			} else
820 				device_printf(dev, "DISCONNECT requested\n");
821 		}
822 		siis_reset(dev);
823 		if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
824 			return;
825 		if (xpt_create_path(&ccb->ccb_h.path, NULL,
826 		    cam_sim_path(ch->sim),
827 		    CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
828 			xpt_free_ccb(ccb);
829 			return;
830 		}
831 		xpt_rescan(ccb);
832 	}
833 }
834 
835 static void
836 siis_ch_intr_locked(void *data)
837 {
838 	device_t dev = (device_t)data;
839 	struct siis_channel *ch = device_get_softc(dev);
840 
841 	mtx_lock(&ch->mtx);
842 	siis_ch_intr(data);
843 	mtx_unlock(&ch->mtx);
844 }
845 
846 static void
847 siis_ch_intr(void *data)
848 {
849 	device_t dev = (device_t)data;
850 	struct siis_channel *ch = device_get_softc(dev);
851 	uint32_t istatus, sstatus, ctx, estatus, ok, err = 0;
852 	enum siis_err_type et;
853 	int i, ccs, port, tslots;
854 
855 	mtx_assert(&ch->mtx, MA_OWNED);
856 	/* Read command statuses. */
857 	sstatus = ATA_INL(ch->r_mem, SIIS_P_SS);
858 	ok = ch->rslots & ~sstatus;
859 	/* Complete all successfull commands. */
860 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
861 		if ((ok >> i) & 1)
862 			siis_end_transaction(&ch->slot[i], SIIS_ERR_NONE);
863 	}
864 	/* Do we have any other events? */
865 	if ((sstatus & SIIS_P_SS_ATTN) == 0)
866 		return;
867 	/* Read and clear interrupt statuses. */
868 	istatus = ATA_INL(ch->r_mem, SIIS_P_IS) &
869 	    (0xFFFF & ~SIIS_P_IX_COMMCOMP);
870 	ATA_OUTL(ch->r_mem, SIIS_P_IS, istatus);
871 	/* Process PHY events */
872 	if (istatus & SIIS_P_IX_PHYRDYCHG)
873 		siis_phy_check_events(dev);
874 	/* Process NOTIFY events */
875 	if (istatus & SIIS_P_IX_SDBN)
876 		siis_notify_events(dev);
877 	/* Process command errors */
878 	if (istatus & SIIS_P_IX_COMMERR) {
879 		estatus = ATA_INL(ch->r_mem, SIIS_P_CMDERR);
880 		ctx = ATA_INL(ch->r_mem, SIIS_P_CTX);
881 		ccs = (ctx & SIIS_P_CTX_SLOT) >> SIIS_P_CTX_SLOT_SHIFT;
882 		port = (ctx & SIIS_P_CTX_PMP) >> SIIS_P_CTX_PMP_SHIFT;
883 		err = ch->rslots & sstatus;
884 //device_printf(dev, "%s ERROR ss %08x is %08x rs %08x es %d act %d port %d serr %08x\n",
885 //    __func__, sstatus, istatus, ch->rslots, estatus, ccs, port,
886 //    ATA_INL(ch->r_mem, SIIS_P_SERR));
887 
888 		if (!ch->recoverycmd && !ch->recovery) {
889 			xpt_freeze_simq(ch->sim, ch->numrslots);
890 			ch->recovery = 1;
891 		}
892 		if (ch->frozen) {
893 			union ccb *fccb = ch->frozen;
894 			ch->frozen = NULL;
895 			fccb->ccb_h.status &= ~CAM_STATUS_MASK;
896 			fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
897 			if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
898 				xpt_freeze_devq(fccb->ccb_h.path, 1);
899 				fccb->ccb_h.status |= CAM_DEV_QFRZN;
900 			}
901 			xpt_done(fccb);
902 		}
903 		if (estatus == SIIS_P_CMDERR_DEV ||
904 		    estatus == SIIS_P_CMDERR_SDB ||
905 		    estatus == SIIS_P_CMDERR_DATAFIS) {
906 			tslots = ch->numtslots[port];
907 			for (i = 0; i < SIIS_MAX_SLOTS; i++) {
908 				/* XXX: requests in loading state. */
909 				if (((ch->rslots >> i) & 1) == 0)
910 					continue;
911 				if (ch->slot[i].ccb->ccb_h.target_id != port)
912 					continue;
913 				if (tslots == 0) {
914 					/* Untagged operation. */
915 					if (i == ccs)
916 						et = SIIS_ERR_TFE;
917 					else
918 						et = SIIS_ERR_INNOCENT;
919 				} else {
920 					/* Tagged operation. */
921 					et = SIIS_ERR_NCQ;
922 				}
923 				siis_end_transaction(&ch->slot[i], et);
924 			}
925 			/*
926 			 * We can't reinit port if there are some other
927 			 * commands active, use resume to complete them.
928 			 */
929 			if (ch->rslots != 0 && !ch->recoverycmd)
930 				ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_RESUME);
931 		} else {
932 			if (estatus == SIIS_P_CMDERR_SENDFIS ||
933 			    estatus == SIIS_P_CMDERR_INCSTATE ||
934 			    estatus == SIIS_P_CMDERR_PPE ||
935 			    estatus == SIIS_P_CMDERR_SERVICE) {
936 				et = SIIS_ERR_SATA;
937 			} else
938 				et = SIIS_ERR_INVALID;
939 			for (i = 0; i < SIIS_MAX_SLOTS; i++) {
940 				/* XXX: requests in loading state. */
941 				if (((ch->rslots >> i) & 1) == 0)
942 					continue;
943 				siis_end_transaction(&ch->slot[i], et);
944 			}
945 		}
946 	}
947 }
948 
949 /* Must be called with channel locked. */
950 static int
951 siis_check_collision(device_t dev, union ccb *ccb)
952 {
953 	struct siis_channel *ch = device_get_softc(dev);
954 
955 	mtx_assert(&ch->mtx, MA_OWNED);
956 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
957 	    (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
958 		/* Tagged command while we have no supported tag free. */
959 		if (((~ch->oslots) & (0x7fffffff >> (31 -
960 		    ch->curr[ccb->ccb_h.target_id].tags))) == 0)
961 			return (1);
962 	}
963 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
964 	    (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) {
965 		/* Atomic command while anything active. */
966 		if (ch->numrslots != 0)
967 			return (1);
968 	}
969        /* We have some atomic command running. */
970        if (ch->aslots != 0)
971                return (1);
972 	return (0);
973 }
974 
975 /* Must be called with channel locked. */
976 static void
977 siis_begin_transaction(device_t dev, union ccb *ccb)
978 {
979 	struct siis_channel *ch = device_get_softc(dev);
980 	struct siis_slot *slot;
981 	int tag, tags;
982 
983 	mtx_assert(&ch->mtx, MA_OWNED);
984 	/* Choose empty slot. */
985 	tags = SIIS_MAX_SLOTS;
986 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
987 	    (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA))
988 		tags = ch->curr[ccb->ccb_h.target_id].tags;
989 	tag = fls((~ch->oslots) & (0x7fffffff >> (31 - tags))) - 1;
990 	/* Occupy chosen slot. */
991 	slot = &ch->slot[tag];
992 	slot->ccb = ccb;
993 	/* Update channel stats. */
994 	ch->oslots |= (1 << slot->slot);
995 	ch->numrslots++;
996 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
997 	    (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
998 		ch->numtslots[ccb->ccb_h.target_id]++;
999 	}
1000 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1001 	    (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)))
1002 		ch->aslots |= (1 << slot->slot);
1003 	slot->dma.nsegs = 0;
1004 	/* If request moves data, setup and load SG list */
1005 	if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1006 		slot->state = SIIS_SLOT_LOADING;
1007 		bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map,
1008 		    ccb, siis_dmasetprd, slot, 0);
1009 	} else
1010 		siis_execute_transaction(slot);
1011 }
1012 
1013 /* Locked by busdma engine. */
1014 static void
1015 siis_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
1016 {
1017 	struct siis_slot *slot = arg;
1018 	struct siis_channel *ch = device_get_softc(slot->dev);
1019 	struct siis_cmd *ctp;
1020 	struct siis_dma_prd *prd;
1021 	int i;
1022 
1023 	mtx_assert(&ch->mtx, MA_OWNED);
1024 	if (error) {
1025 		device_printf(slot->dev, "DMA load error\n");
1026 		if (!ch->recoverycmd)
1027 			xpt_freeze_simq(ch->sim, 1);
1028 		siis_end_transaction(slot, SIIS_ERR_INVALID);
1029 		return;
1030 	}
1031 	KASSERT(nsegs <= SIIS_SG_ENTRIES, ("too many DMA segment entries\n"));
1032 	slot->dma.nsegs = nsegs;
1033 	if (nsegs != 0) {
1034 		/* Get a piece of the workspace for this request */
1035 		ctp = (struct siis_cmd *)(ch->dma.work + SIIS_CT_OFFSET +
1036 		    (SIIS_CT_SIZE * slot->slot));
1037 		/* Fill S/G table */
1038 		if (slot->ccb->ccb_h.func_code == XPT_ATA_IO)
1039 			prd = &ctp->u.ata.prd[0];
1040 		else
1041 			prd = &ctp->u.atapi.prd[0];
1042 		for (i = 0; i < nsegs; i++) {
1043 			prd[i].dba = htole64(segs[i].ds_addr);
1044 			prd[i].dbc = htole32(segs[i].ds_len);
1045 			prd[i].control = 0;
1046 		}
1047 			prd[nsegs - 1].control = htole32(SIIS_PRD_TRM);
1048 		bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1049 		    ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ?
1050 		    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE));
1051 	}
1052 	siis_execute_transaction(slot);
1053 }
1054 
1055 /* Must be called with channel locked. */
1056 static void
1057 siis_execute_transaction(struct siis_slot *slot)
1058 {
1059 	device_t dev = slot->dev;
1060 	struct siis_channel *ch = device_get_softc(dev);
1061 	struct siis_cmd *ctp;
1062 	union ccb *ccb = slot->ccb;
1063 	u_int64_t prb_bus;
1064 
1065 	mtx_assert(&ch->mtx, MA_OWNED);
1066 	/* Get a piece of the workspace for this request */
1067 	ctp = (struct siis_cmd *)
1068 		(ch->dma.work + SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot));
1069 	ctp->control = 0;
1070 	ctp->protocol_override = 0;
1071 	ctp->transfer_count = 0;
1072 	/* Special handling for Soft Reset command. */
1073 	if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1074 		if (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) {
1075 			ctp->control |= htole16(SIIS_PRB_SOFT_RESET);
1076 		} else {
1077 			ctp->control |= htole16(SIIS_PRB_PROTOCOL_OVERRIDE);
1078 			if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1079 				ctp->protocol_override |=
1080 				    htole16(SIIS_PRB_PROTO_NCQ);
1081 			}
1082 			if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
1083 				ctp->protocol_override |=
1084 				    htole16(SIIS_PRB_PROTO_READ);
1085 			} else
1086 			if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
1087 				ctp->protocol_override |=
1088 				    htole16(SIIS_PRB_PROTO_WRITE);
1089 			}
1090 		}
1091 	} else if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1092 		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
1093 			ctp->control |= htole16(SIIS_PRB_PACKET_READ);
1094 		else
1095 		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
1096 			ctp->control |= htole16(SIIS_PRB_PACKET_WRITE);
1097 	}
1098 	/* Special handling for Soft Reset command. */
1099 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1100 	    (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
1101 	    (ccb->ataio.cmd.control & ATA_A_RESET)) {
1102 		/* Kick controller into sane state */
1103 		siis_portinit(dev);
1104 	}
1105 	/* Setup the FIS for this request */
1106 	if (!siis_setup_fis(dev, ctp, ccb, slot->slot)) {
1107 		device_printf(ch->dev, "Setting up SATA FIS failed\n");
1108 		if (!ch->recoverycmd)
1109 			xpt_freeze_simq(ch->sim, 1);
1110 		siis_end_transaction(slot, SIIS_ERR_INVALID);
1111 		return;
1112 	}
1113 	bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
1114 	    BUS_DMASYNC_PREWRITE);
1115 	/* Issue command to the controller. */
1116 	slot->state = SIIS_SLOT_RUNNING;
1117 	ch->rslots |= (1 << slot->slot);
1118 	prb_bus = ch->dma.work_bus +
1119 	      SIIS_CT_OFFSET + (SIIS_CT_SIZE * slot->slot);
1120 	ATA_OUTL(ch->r_mem, SIIS_P_CACTL(slot->slot), prb_bus);
1121 	ATA_OUTL(ch->r_mem, SIIS_P_CACTH(slot->slot), prb_bus >> 32);
1122 	/* Start command execution timeout */
1123 	callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout, 0,
1124 	    (timeout_t*)siis_timeout, slot, 0);
1125 	return;
1126 }
1127 
1128 /* Must be called with channel locked. */
1129 static void
1130 siis_process_timeout(device_t dev)
1131 {
1132 	struct siis_channel *ch = device_get_softc(dev);
1133 	int i;
1134 
1135 	mtx_assert(&ch->mtx, MA_OWNED);
1136 	if (!ch->recoverycmd && !ch->recovery) {
1137 		xpt_freeze_simq(ch->sim, ch->numrslots);
1138 		ch->recovery = 1;
1139 	}
1140 	/* Handle the rest of commands. */
1141 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1142 		/* Do we have a running request on slot? */
1143 		if (ch->slot[i].state < SIIS_SLOT_RUNNING)
1144 			continue;
1145 		siis_end_transaction(&ch->slot[i], SIIS_ERR_TIMEOUT);
1146 	}
1147 }
1148 
1149 /* Must be called with channel locked. */
1150 static void
1151 siis_rearm_timeout(device_t dev)
1152 {
1153 	struct siis_channel *ch = device_get_softc(dev);
1154 	int i;
1155 
1156 	mtx_assert(&ch->mtx, MA_OWNED);
1157 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1158 		struct siis_slot *slot = &ch->slot[i];
1159 
1160 		/* Do we have a running request on slot? */
1161 		if (slot->state < SIIS_SLOT_RUNNING)
1162 			continue;
1163 		if ((ch->toslots & (1 << i)) == 0)
1164 			continue;
1165 		callout_reset_sbt(&slot->timeout,
1166 		    SBT_1MS * slot->ccb->ccb_h.timeout, 0,
1167 		    (timeout_t*)siis_timeout, slot, 0);
1168 	}
1169 }
1170 
1171 /* Locked by callout mechanism. */
1172 static void
1173 siis_timeout(struct siis_slot *slot)
1174 {
1175 	device_t dev = slot->dev;
1176 	struct siis_channel *ch = device_get_softc(dev);
1177 	union ccb *ccb = slot->ccb;
1178 
1179 	mtx_assert(&ch->mtx, MA_OWNED);
1180 	/* Check for stale timeout. */
1181 	if (slot->state < SIIS_SLOT_RUNNING)
1182 		return;
1183 
1184 	/* Handle soft-reset timeouts without doing hard-reset. */
1185 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1186 	    (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
1187 	    (ccb->ataio.cmd.control & ATA_A_RESET)) {
1188 		xpt_freeze_simq(ch->sim, ch->numrslots);
1189 		siis_end_transaction(slot, SIIS_ERR_TFE);
1190 		return;
1191 	}
1192 
1193 	device_printf(dev, "Timeout on slot %d\n", slot->slot);
1194 	device_printf(dev, "%s is %08x ss %08x rs %08x es %08x sts %08x serr %08x\n",
1195 	    __func__, ATA_INL(ch->r_mem, SIIS_P_IS),
1196 	    ATA_INL(ch->r_mem, SIIS_P_SS), ch->rslots,
1197 	    ATA_INL(ch->r_mem, SIIS_P_CMDERR), ATA_INL(ch->r_mem, SIIS_P_STS),
1198 	    ATA_INL(ch->r_mem, SIIS_P_SERR));
1199 
1200 	if (ch->toslots == 0)
1201 		xpt_freeze_simq(ch->sim, 1);
1202 	ch->toslots |= (1 << slot->slot);
1203 	if ((ch->rslots & ~ch->toslots) == 0)
1204 		siis_process_timeout(dev);
1205 	else
1206 		device_printf(dev, " ... waiting for slots %08x\n",
1207 		    ch->rslots & ~ch->toslots);
1208 }
1209 
1210 /* Must be called with channel locked. */
1211 static void
1212 siis_end_transaction(struct siis_slot *slot, enum siis_err_type et)
1213 {
1214 	device_t dev = slot->dev;
1215 	struct siis_channel *ch = device_get_softc(dev);
1216 	union ccb *ccb = slot->ccb;
1217 	int lastto;
1218 
1219 	mtx_assert(&ch->mtx, MA_OWNED);
1220 	bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
1221 	    BUS_DMASYNC_POSTWRITE);
1222 	/* Read result registers to the result struct
1223 	 * May be incorrect if several commands finished same time,
1224 	 * so read only when sure or have to.
1225 	 */
1226 	if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1227 		struct ata_res *res = &ccb->ataio.res;
1228 		if ((et == SIIS_ERR_TFE) ||
1229 		    (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) {
1230 			int offs = SIIS_P_LRAM_SLOT(slot->slot) + 8;
1231 
1232 			res->status = ATA_INB(ch->r_mem, offs + 2);
1233 			res->error = ATA_INB(ch->r_mem, offs + 3);
1234 			res->lba_low = ATA_INB(ch->r_mem, offs + 4);
1235 			res->lba_mid = ATA_INB(ch->r_mem, offs + 5);
1236 			res->lba_high = ATA_INB(ch->r_mem, offs + 6);
1237 			res->device = ATA_INB(ch->r_mem, offs + 7);
1238 			res->lba_low_exp = ATA_INB(ch->r_mem, offs + 8);
1239 			res->lba_mid_exp = ATA_INB(ch->r_mem, offs + 9);
1240 			res->lba_high_exp = ATA_INB(ch->r_mem, offs + 10);
1241 			res->sector_count = ATA_INB(ch->r_mem, offs + 12);
1242 			res->sector_count_exp = ATA_INB(ch->r_mem, offs + 13);
1243 		} else
1244 			bzero(res, sizeof(*res));
1245 		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN &&
1246 		    ch->numrslots == 1) {
1247 			ccb->ataio.resid = ccb->ataio.dxfer_len -
1248 			    ATA_INL(ch->r_mem, SIIS_P_LRAM_SLOT(slot->slot) + 4);
1249 		}
1250 	} else {
1251 		if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN &&
1252 		    ch->numrslots == 1) {
1253 			ccb->csio.resid = ccb->csio.dxfer_len -
1254 			    ATA_INL(ch->r_mem, SIIS_P_LRAM_SLOT(slot->slot) + 4);
1255 		}
1256 	}
1257 	if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1258 		bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1259 		    (ccb->ccb_h.flags & CAM_DIR_IN) ?
1260 		    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1261 		bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map);
1262 	}
1263 	/* Set proper result status. */
1264 	if (et != SIIS_ERR_NONE || ch->recovery) {
1265 		ch->eslots |= (1 << slot->slot);
1266 		ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
1267 	}
1268 	/* In case of error, freeze device for proper recovery. */
1269 	if (et != SIIS_ERR_NONE && (!ch->recoverycmd) &&
1270 	    !(ccb->ccb_h.status & CAM_DEV_QFRZN)) {
1271 		xpt_freeze_devq(ccb->ccb_h.path, 1);
1272 		ccb->ccb_h.status |= CAM_DEV_QFRZN;
1273 	}
1274 	ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1275 	switch (et) {
1276 	case SIIS_ERR_NONE:
1277 		ccb->ccb_h.status |= CAM_REQ_CMP;
1278 		if (ccb->ccb_h.func_code == XPT_SCSI_IO)
1279 			ccb->csio.scsi_status = SCSI_STATUS_OK;
1280 		break;
1281 	case SIIS_ERR_INVALID:
1282 		ch->fatalerr = 1;
1283 		ccb->ccb_h.status |= CAM_REQ_INVALID;
1284 		break;
1285 	case SIIS_ERR_INNOCENT:
1286 		ccb->ccb_h.status |= CAM_REQUEUE_REQ;
1287 		break;
1288 	case SIIS_ERR_TFE:
1289 	case SIIS_ERR_NCQ:
1290 		if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1291 			ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
1292 			ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1293 		} else {
1294 			ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
1295 		}
1296 		break;
1297 	case SIIS_ERR_SATA:
1298 		ch->fatalerr = 1;
1299 		ccb->ccb_h.status |= CAM_UNCOR_PARITY;
1300 		break;
1301 	case SIIS_ERR_TIMEOUT:
1302 		ch->fatalerr = 1;
1303 		ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
1304 		break;
1305 	default:
1306 		ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
1307 	}
1308 	/* Free slot. */
1309 	ch->oslots &= ~(1 << slot->slot);
1310 	ch->rslots &= ~(1 << slot->slot);
1311 	ch->aslots &= ~(1 << slot->slot);
1312 	slot->state = SIIS_SLOT_EMPTY;
1313 	slot->ccb = NULL;
1314 	/* Update channel stats. */
1315 	ch->numrslots--;
1316 	if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1317 	    (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
1318 		ch->numtslots[ccb->ccb_h.target_id]--;
1319 	}
1320 	/* Cancel timeout state if request completed normally. */
1321 	if (et != SIIS_ERR_TIMEOUT) {
1322 		lastto = (ch->toslots == (1 << slot->slot));
1323 		ch->toslots &= ~(1 << slot->slot);
1324 		if (lastto)
1325 			xpt_release_simq(ch->sim, TRUE);
1326 	}
1327 	/* If it was our READ LOG command - process it. */
1328 	if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) {
1329 		siis_process_read_log(dev, ccb);
1330 	/* If it was our REQUEST SENSE command - process it. */
1331 	} else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) {
1332 		siis_process_request_sense(dev, ccb);
1333 	/* If it was NCQ or ATAPI command error, put result on hold. */
1334 	} else if (et == SIIS_ERR_NCQ ||
1335 	    ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR &&
1336 	     (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) {
1337 		ch->hold[slot->slot] = ccb;
1338 		ch->numhslots++;
1339 	} else
1340 		xpt_done(ccb);
1341 	/* If we have no other active commands, ... */
1342 	if (ch->rslots == 0) {
1343 		/* if there were timeouts or fatal error - reset port. */
1344 		if (ch->toslots != 0 || ch->fatalerr) {
1345 			siis_reset(dev);
1346 		} else {
1347 			/* if we have slots in error, we can reinit port. */
1348 			if (ch->eslots != 0)
1349 				siis_portinit(dev);
1350 			/* if there commands on hold, we can do recovery. */
1351 			if (!ch->recoverycmd && ch->numhslots)
1352 				siis_issue_recovery(dev);
1353 		}
1354 	/* If all the reset of commands are in timeout - abort them. */
1355 	} else if ((ch->rslots & ~ch->toslots) == 0 &&
1356 	    et != SIIS_ERR_TIMEOUT)
1357 		siis_rearm_timeout(dev);
1358 	/* Unfreeze frozen command. */
1359 	if (ch->frozen && !siis_check_collision(dev, ch->frozen)) {
1360 		union ccb *fccb = ch->frozen;
1361 		ch->frozen = NULL;
1362 		siis_begin_transaction(dev, fccb);
1363 		xpt_release_simq(ch->sim, TRUE);
1364 	}
1365 }
1366 
1367 static void
1368 siis_issue_recovery(device_t dev)
1369 {
1370 	struct siis_channel *ch = device_get_softc(dev);
1371 	union ccb *ccb;
1372 	struct ccb_ataio *ataio;
1373 	struct ccb_scsiio *csio;
1374 	int i;
1375 
1376 	/* Find some held command. */
1377 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1378 		if (ch->hold[i])
1379 			break;
1380 	}
1381 	if (i == SIIS_MAX_SLOTS)
1382 		return;
1383 	ccb = xpt_alloc_ccb_nowait();
1384 	if (ccb == NULL) {
1385 		device_printf(dev, "Unable to allocate recovery command\n");
1386 completeall:
1387 		/* We can't do anything -- complete held commands. */
1388 		for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1389 			if (ch->hold[i] == NULL)
1390 				continue;
1391 			ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1392 			ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL;
1393 			xpt_done(ch->hold[i]);
1394 			ch->hold[i] = NULL;
1395 			ch->numhslots--;
1396 		}
1397 		siis_reset(dev);
1398 		return;
1399 	}
1400 	ccb->ccb_h = ch->hold[i]->ccb_h;	/* Reuse old header. */
1401 	if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1402 		/* READ LOG */
1403 		ccb->ccb_h.recovery_type = RECOVERY_READ_LOG;
1404 		ccb->ccb_h.func_code = XPT_ATA_IO;
1405 		ccb->ccb_h.flags = CAM_DIR_IN;
1406 		ccb->ccb_h.timeout = 1000;	/* 1s should be enough. */
1407 		ataio = &ccb->ataio;
1408 		ataio->data_ptr = malloc(512, M_SIIS, M_NOWAIT);
1409 		if (ataio->data_ptr == NULL) {
1410 			xpt_free_ccb(ccb);
1411 			device_printf(dev,
1412 			    "Unable to allocate memory for READ LOG command\n");
1413 			goto completeall;
1414 		}
1415 		ataio->dxfer_len = 512;
1416 		bzero(&ataio->cmd, sizeof(ataio->cmd));
1417 		ataio->cmd.flags = CAM_ATAIO_48BIT;
1418 		ataio->cmd.command = 0x2F;	/* READ LOG EXT */
1419 		ataio->cmd.sector_count = 1;
1420 		ataio->cmd.sector_count_exp = 0;
1421 		ataio->cmd.lba_low = 0x10;
1422 		ataio->cmd.lba_mid = 0;
1423 		ataio->cmd.lba_mid_exp = 0;
1424 	} else {
1425 		/* REQUEST SENSE */
1426 		ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE;
1427 		ccb->ccb_h.recovery_slot = i;
1428 		ccb->ccb_h.func_code = XPT_SCSI_IO;
1429 		ccb->ccb_h.flags = CAM_DIR_IN;
1430 		ccb->ccb_h.status = 0;
1431 		ccb->ccb_h.timeout = 1000;	/* 1s should be enough. */
1432 		csio = &ccb->csio;
1433 		csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data;
1434 		csio->dxfer_len = ch->hold[i]->csio.sense_len;
1435 		csio->cdb_len = 6;
1436 		bzero(&csio->cdb_io, sizeof(csio->cdb_io));
1437 		csio->cdb_io.cdb_bytes[0] = 0x03;
1438 		csio->cdb_io.cdb_bytes[4] = csio->dxfer_len;
1439 	}
1440 	ch->recoverycmd = 1;
1441 	siis_begin_transaction(dev, ccb);
1442 }
1443 
1444 static void
1445 siis_process_read_log(device_t dev, union ccb *ccb)
1446 {
1447 	struct siis_channel *ch = device_get_softc(dev);
1448 	uint8_t *data;
1449 	struct ata_res *res;
1450 	int i;
1451 
1452 	ch->recoverycmd = 0;
1453 	data = ccb->ataio.data_ptr;
1454 	if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
1455 	    (data[0] & 0x80) == 0) {
1456 		for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1457 			if (!ch->hold[i])
1458 				continue;
1459 			if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id)
1460 				continue;
1461 			if ((data[0] & 0x1F) == i) {
1462 				res = &ch->hold[i]->ataio.res;
1463 				res->status = data[2];
1464 				res->error = data[3];
1465 				res->lba_low = data[4];
1466 				res->lba_mid = data[5];
1467 				res->lba_high = data[6];
1468 				res->device = data[7];
1469 				res->lba_low_exp = data[8];
1470 				res->lba_mid_exp = data[9];
1471 				res->lba_high_exp = data[10];
1472 				res->sector_count = data[12];
1473 				res->sector_count_exp = data[13];
1474 			} else {
1475 				ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1476 				ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ;
1477 			}
1478 			xpt_done(ch->hold[i]);
1479 			ch->hold[i] = NULL;
1480 			ch->numhslots--;
1481 		}
1482 	} else {
1483 		if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
1484 			device_printf(dev, "Error while READ LOG EXT\n");
1485 		else if ((data[0] & 0x80) == 0) {
1486 			device_printf(dev, "Non-queued command error in READ LOG EXT\n");
1487 		}
1488 		for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1489 			if (!ch->hold[i])
1490 				continue;
1491 			if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id)
1492 				continue;
1493 			xpt_done(ch->hold[i]);
1494 			ch->hold[i] = NULL;
1495 			ch->numhslots--;
1496 		}
1497 	}
1498 	free(ccb->ataio.data_ptr, M_SIIS);
1499 	xpt_free_ccb(ccb);
1500 }
1501 
1502 static void
1503 siis_process_request_sense(device_t dev, union ccb *ccb)
1504 {
1505 	struct siis_channel *ch = device_get_softc(dev);
1506 	int i;
1507 
1508 	ch->recoverycmd = 0;
1509 
1510 	i = ccb->ccb_h.recovery_slot;
1511 	if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
1512 		ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID;
1513 	} else {
1514 		ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1515 		ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL;
1516 	}
1517 	xpt_done(ch->hold[i]);
1518 	ch->hold[i] = NULL;
1519 	ch->numhslots--;
1520 	xpt_free_ccb(ccb);
1521 }
1522 
1523 static void
1524 siis_portinit(device_t dev)
1525 {
1526 	struct siis_channel *ch = device_get_softc(dev);
1527 	int i;
1528 
1529 	ch->eslots = 0;
1530 	ch->recovery = 0;
1531 	ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_RESUME);
1532 	for (i = 0; i < 16; i++) {
1533 		ATA_OUTL(ch->r_mem, SIIS_P_PMPSTS(i), 0),
1534 		ATA_OUTL(ch->r_mem, SIIS_P_PMPQACT(i), 0);
1535 	}
1536 	ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_INIT);
1537 	siis_wait_ready(dev, 1000);
1538 }
1539 
1540 static int
1541 siis_devreset(device_t dev)
1542 {
1543 	struct siis_channel *ch = device_get_softc(dev);
1544 	int timeout = 0;
1545 	uint32_t val;
1546 
1547 	ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_DEV_RESET);
1548 	while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) &
1549 	    SIIS_P_CTL_DEV_RESET) != 0) {
1550 		DELAY(100);
1551 		if (timeout++ > 1000) {
1552 			device_printf(dev, "device reset stuck "
1553 			    "(timeout 100ms) status = %08x\n", val);
1554 			return (EBUSY);
1555 		}
1556 	}
1557 	return (0);
1558 }
1559 
1560 static int
1561 siis_wait_ready(device_t dev, int t)
1562 {
1563 	struct siis_channel *ch = device_get_softc(dev);
1564 	int timeout = 0;
1565 	uint32_t val;
1566 
1567 	while (((val = ATA_INL(ch->r_mem, SIIS_P_STS)) &
1568 	    SIIS_P_CTL_READY) == 0) {
1569 		DELAY(1000);
1570 		if (timeout++ > t) {
1571 			device_printf(dev, "port is not ready (timeout %dms) "
1572 			    "status = %08x\n", t, val);
1573 			return (EBUSY);
1574 		}
1575 	}
1576 	return (0);
1577 }
1578 
1579 static void
1580 siis_reset(device_t dev)
1581 {
1582 	struct siis_channel *ch = device_get_softc(dev);
1583 	int i, retry = 0, sata_rev;
1584 	uint32_t val;
1585 
1586 	xpt_freeze_simq(ch->sim, 1);
1587 	if (bootverbose)
1588 		device_printf(dev, "SIIS reset...\n");
1589 	if (!ch->recoverycmd && !ch->recovery)
1590 		xpt_freeze_simq(ch->sim, ch->numrslots);
1591 	/* Requeue frozen command. */
1592 	if (ch->frozen) {
1593 		union ccb *fccb = ch->frozen;
1594 		ch->frozen = NULL;
1595 		fccb->ccb_h.status &= ~CAM_STATUS_MASK;
1596 		fccb->ccb_h.status |= CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
1597 		if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
1598 			xpt_freeze_devq(fccb->ccb_h.path, 1);
1599 			fccb->ccb_h.status |= CAM_DEV_QFRZN;
1600 		}
1601 		xpt_done(fccb);
1602 	}
1603 	/* Requeue all running commands. */
1604 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1605 		/* Do we have a running request on slot? */
1606 		if (ch->slot[i].state < SIIS_SLOT_RUNNING)
1607 			continue;
1608 		/* XXX; Commands in loading state. */
1609 		siis_end_transaction(&ch->slot[i], SIIS_ERR_INNOCENT);
1610 	}
1611 	/* Finish all held commands as-is. */
1612 	for (i = 0; i < SIIS_MAX_SLOTS; i++) {
1613 		if (!ch->hold[i])
1614 			continue;
1615 		xpt_done(ch->hold[i]);
1616 		ch->hold[i] = NULL;
1617 		ch->numhslots--;
1618 	}
1619 	if (ch->toslots != 0)
1620 		xpt_release_simq(ch->sim, TRUE);
1621 	ch->eslots = 0;
1622 	ch->recovery = 0;
1623 	ch->toslots = 0;
1624 	ch->fatalerr = 0;
1625 	/* Disable port interrupts */
1626 	ATA_OUTL(ch->r_mem, SIIS_P_IECLR, 0x0000FFFF);
1627 	/* Set speed limit. */
1628 	sata_rev = ch->user[ch->pm_present ? 15 : 0].revision;
1629 	if (sata_rev == 1)
1630 		val = ATA_SC_SPD_SPEED_GEN1;
1631 	else if (sata_rev == 2)
1632 		val = ATA_SC_SPD_SPEED_GEN2;
1633 	else if (sata_rev == 3)
1634 		val = ATA_SC_SPD_SPEED_GEN3;
1635 	else
1636 		val = 0;
1637 	ATA_OUTL(ch->r_mem, SIIS_P_SCTL,
1638 	    ATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 :
1639 	    (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)));
1640 retry:
1641 	siis_devreset(dev);
1642 	/* Reset and reconnect PHY, */
1643 	if (!siis_sata_connect(ch)) {
1644 		ch->devices = 0;
1645 		/* Enable port interrupts */
1646 		ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED);
1647 		if (bootverbose)
1648 			device_printf(dev,
1649 			    "SIIS reset done: phy reset found no device\n");
1650 		/* Tell the XPT about the event */
1651 		xpt_async(AC_BUS_RESET, ch->path, NULL);
1652 		xpt_release_simq(ch->sim, TRUE);
1653 		return;
1654 	}
1655 	/* Wait for port ready status. */
1656 	if (siis_wait_ready(dev, 1000)) {
1657 		device_printf(dev, "port ready timeout\n");
1658 		if (!retry) {
1659 			device_printf(dev, "trying full port reset ...\n");
1660 			/* Get port to the reset state. */
1661 			ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PORT_RESET);
1662 			DELAY(10000);
1663 			/* Get port out of reset state. */
1664 			ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PORT_RESET);
1665 			ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_32BIT);
1666 			if (ch->pm_present)
1667 				ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME);
1668 			else
1669 				ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME);
1670 			siis_wait_ready(dev, 5000);
1671 			retry = 1;
1672 			goto retry;
1673 		}
1674 	}
1675 	ch->devices = 1;
1676 	/* Enable port interrupts */
1677 	ATA_OUTL(ch->r_mem, SIIS_P_IS, 0xFFFFFFFF);
1678 	ATA_OUTL(ch->r_mem, SIIS_P_IESET, SIIS_P_IX_ENABLED);
1679 	if (bootverbose)
1680 		device_printf(dev, "SIIS reset done: devices=%08x\n", ch->devices);
1681 	/* Tell the XPT about the event */
1682 	xpt_async(AC_BUS_RESET, ch->path, NULL);
1683 	xpt_release_simq(ch->sim, TRUE);
1684 }
1685 
1686 static int
1687 siis_setup_fis(device_t dev, struct siis_cmd *ctp, union ccb *ccb, int tag)
1688 {
1689 	struct siis_channel *ch = device_get_softc(dev);
1690 	u_int8_t *fis = &ctp->fis[0];
1691 
1692 	bzero(fis, 24);
1693 	fis[0] = 0x27;  		/* host to device */
1694 	fis[1] = (ccb->ccb_h.target_id & 0x0f);
1695 	if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1696 		fis[1] |= 0x80;
1697 		fis[2] = ATA_PACKET_CMD;
1698 		if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
1699 		    ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA)
1700 			fis[3] = ATA_F_DMA;
1701 		else {
1702 			fis[5] = ccb->csio.dxfer_len;
1703 		        fis[6] = ccb->csio.dxfer_len >> 8;
1704 		}
1705 		fis[7] = ATA_D_LBA;
1706 		fis[15] = ATA_A_4BIT;
1707 		bzero(ctp->u.atapi.ccb, 16);
1708 		bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
1709 		    ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes,
1710 		    ctp->u.atapi.ccb, ccb->csio.cdb_len);
1711 	} else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) {
1712 		fis[1] |= 0x80;
1713 		fis[2] = ccb->ataio.cmd.command;
1714 		fis[3] = ccb->ataio.cmd.features;
1715 		fis[4] = ccb->ataio.cmd.lba_low;
1716 		fis[5] = ccb->ataio.cmd.lba_mid;
1717 		fis[6] = ccb->ataio.cmd.lba_high;
1718 		fis[7] = ccb->ataio.cmd.device;
1719 		fis[8] = ccb->ataio.cmd.lba_low_exp;
1720 		fis[9] = ccb->ataio.cmd.lba_mid_exp;
1721 		fis[10] = ccb->ataio.cmd.lba_high_exp;
1722 		fis[11] = ccb->ataio.cmd.features_exp;
1723 		if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1724 			fis[12] = tag << 3;
1725 			fis[13] = 0;
1726 		} else {
1727 			fis[12] = ccb->ataio.cmd.sector_count;
1728 			fis[13] = ccb->ataio.cmd.sector_count_exp;
1729 		}
1730 		fis[15] = ATA_A_4BIT;
1731 	} else {
1732 		/* Soft reset. */
1733 	}
1734 	return (20);
1735 }
1736 
1737 static int
1738 siis_sata_connect(struct siis_channel *ch)
1739 {
1740 	u_int32_t status;
1741 	int timeout, found = 0;
1742 
1743 	/* Wait up to 100ms for "connect well" */
1744 	for (timeout = 0; timeout < 1000 ; timeout++) {
1745 		status = ATA_INL(ch->r_mem, SIIS_P_SSTS);
1746 		if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE)
1747 			found = 1;
1748 		if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) &&
1749 		    ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) &&
1750 		    ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE))
1751 			break;
1752 		if ((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_OFFLINE) {
1753 			if (bootverbose) {
1754 				device_printf(ch->dev, "SATA offline status=%08x\n",
1755 				    status);
1756 			}
1757 			return (0);
1758 		}
1759 		if (found == 0 && timeout >= 100)
1760 			break;
1761 		DELAY(100);
1762 	}
1763 	if (timeout >= 1000 || !found) {
1764 		if (bootverbose) {
1765 			device_printf(ch->dev,
1766 			    "SATA connect timeout time=%dus status=%08x\n",
1767 			    timeout * 100, status);
1768 		}
1769 		return (0);
1770 	}
1771 	if (bootverbose) {
1772 		device_printf(ch->dev, "SATA connect time=%dus status=%08x\n",
1773 		    timeout * 100, status);
1774 	}
1775 	/* Clear SATA error register */
1776 	ATA_OUTL(ch->r_mem, SIIS_P_SERR, 0xffffffff);
1777 	return (1);
1778 }
1779 
1780 static int
1781 siis_check_ids(device_t dev, union ccb *ccb)
1782 {
1783 
1784 	if (ccb->ccb_h.target_id > 15) {
1785 		ccb->ccb_h.status = CAM_TID_INVALID;
1786 		xpt_done(ccb);
1787 		return (-1);
1788 	}
1789 	if (ccb->ccb_h.target_lun != 0) {
1790 		ccb->ccb_h.status = CAM_LUN_INVALID;
1791 		xpt_done(ccb);
1792 		return (-1);
1793 	}
1794 	return (0);
1795 }
1796 
1797 static void
1798 siisaction(struct cam_sim *sim, union ccb *ccb)
1799 {
1800 	device_t dev, parent;
1801 	struct siis_channel *ch;
1802 
1803 	CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("siisaction func_code=%x\n",
1804 	    ccb->ccb_h.func_code));
1805 
1806 	ch = (struct siis_channel *)cam_sim_softc(sim);
1807 	dev = ch->dev;
1808 	mtx_assert(&ch->mtx, MA_OWNED);
1809 	switch (ccb->ccb_h.func_code) {
1810 	/* Common cases first */
1811 	case XPT_ATA_IO:	/* Execute the requested I/O operation */
1812 	case XPT_SCSI_IO:
1813 		if (siis_check_ids(dev, ccb))
1814 			return;
1815 		if (ch->devices == 0 ||
1816 		    (ch->pm_present == 0 &&
1817 		     ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) {
1818 			ccb->ccb_h.status = CAM_SEL_TIMEOUT;
1819 			break;
1820 		}
1821 		ccb->ccb_h.recovery_type = RECOVERY_NONE;
1822 		/* Check for command collision. */
1823 		if (siis_check_collision(dev, ccb)) {
1824 			/* Freeze command. */
1825 			ch->frozen = ccb;
1826 			/* We have only one frozen slot, so freeze simq also. */
1827 			xpt_freeze_simq(ch->sim, 1);
1828 			return;
1829 		}
1830 		siis_begin_transaction(dev, ccb);
1831 		return;
1832 	case XPT_EN_LUN:		/* Enable LUN as a target */
1833 	case XPT_TARGET_IO:		/* Execute target I/O request */
1834 	case XPT_ACCEPT_TARGET_IO:	/* Accept Host Target Mode CDB */
1835 	case XPT_CONT_TARGET_IO:	/* Continue Host Target I/O Connection*/
1836 	case XPT_ABORT:			/* Abort the specified CCB */
1837 		/* XXX Implement */
1838 		ccb->ccb_h.status = CAM_REQ_INVALID;
1839 		break;
1840 	case XPT_SET_TRAN_SETTINGS:
1841 	{
1842 		struct	ccb_trans_settings *cts = &ccb->cts;
1843 		struct	siis_device *d;
1844 
1845 		if (siis_check_ids(dev, ccb))
1846 			return;
1847 		if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
1848 			d = &ch->curr[ccb->ccb_h.target_id];
1849 		else
1850 			d = &ch->user[ccb->ccb_h.target_id];
1851 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
1852 			d->revision = cts->xport_specific.sata.revision;
1853 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE)
1854 			d->mode = cts->xport_specific.sata.mode;
1855 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT)
1856 			d->bytecount = min(8192, cts->xport_specific.sata.bytecount);
1857 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
1858 			d->tags = min(SIIS_MAX_SLOTS, cts->xport_specific.sata.tags);
1859 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) {
1860 			ch->pm_present = cts->xport_specific.sata.pm_present;
1861 			if (ch->pm_present)
1862 				ATA_OUTL(ch->r_mem, SIIS_P_CTLSET, SIIS_P_CTL_PME);
1863 			else
1864 				ATA_OUTL(ch->r_mem, SIIS_P_CTLCLR, SIIS_P_CTL_PME);
1865 		}
1866 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
1867 			d->atapi = cts->xport_specific.sata.atapi;
1868 		if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
1869 			d->caps = cts->xport_specific.sata.caps;
1870 		ccb->ccb_h.status = CAM_REQ_CMP;
1871 		break;
1872 	}
1873 	case XPT_GET_TRAN_SETTINGS:
1874 	/* Get default/user set transfer settings for the target */
1875 	{
1876 		struct	ccb_trans_settings *cts = &ccb->cts;
1877 		struct  siis_device *d;
1878 		uint32_t status;
1879 
1880 		if (siis_check_ids(dev, ccb))
1881 			return;
1882 		if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
1883 			d = &ch->curr[ccb->ccb_h.target_id];
1884 		else
1885 			d = &ch->user[ccb->ccb_h.target_id];
1886 		cts->protocol = PROTO_UNSPECIFIED;
1887 		cts->protocol_version = PROTO_VERSION_UNSPECIFIED;
1888 		cts->transport = XPORT_SATA;
1889 		cts->transport_version = XPORT_VERSION_UNSPECIFIED;
1890 		cts->proto_specific.valid = 0;
1891 		cts->xport_specific.sata.valid = 0;
1892 		if (cts->type == CTS_TYPE_CURRENT_SETTINGS &&
1893 		    (ccb->ccb_h.target_id == 15 ||
1894 		    (ccb->ccb_h.target_id == 0 && !ch->pm_present))) {
1895 			status = ATA_INL(ch->r_mem, SIIS_P_SSTS) & ATA_SS_SPD_MASK;
1896 			if (status & 0x0f0) {
1897 				cts->xport_specific.sata.revision =
1898 				    (status & 0x0f0) >> 4;
1899 				cts->xport_specific.sata.valid |=
1900 				    CTS_SATA_VALID_REVISION;
1901 			}
1902 			cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D;
1903 			if (ch->pm_level)
1904 				cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ;
1905 			cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN;
1906 			cts->xport_specific.sata.caps &=
1907 			    ch->user[ccb->ccb_h.target_id].caps;
1908 			cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
1909 		} else {
1910 			cts->xport_specific.sata.revision = d->revision;
1911 			cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION;
1912 			cts->xport_specific.sata.caps = d->caps;
1913 			if (cts->type == CTS_TYPE_CURRENT_SETTINGS &&
1914 			    (ch->quirks & SIIS_Q_SNTF) == 0)
1915 				cts->xport_specific.sata.caps &= ~CTS_SATA_CAPS_H_AN;
1916 			cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
1917 		}
1918 		cts->xport_specific.sata.mode = d->mode;
1919 		cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE;
1920 		cts->xport_specific.sata.bytecount = d->bytecount;
1921 		cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT;
1922 		cts->xport_specific.sata.pm_present = ch->pm_present;
1923 		cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM;
1924 		cts->xport_specific.sata.tags = d->tags;
1925 		cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS;
1926 		cts->xport_specific.sata.atapi = d->atapi;
1927 		cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI;
1928 		ccb->ccb_h.status = CAM_REQ_CMP;
1929 		break;
1930 	}
1931 	case XPT_RESET_BUS:		/* Reset the specified SCSI bus */
1932 	case XPT_RESET_DEV:	/* Bus Device Reset the specified SCSI device */
1933 		siis_reset(dev);
1934 		ccb->ccb_h.status = CAM_REQ_CMP;
1935 		break;
1936 	case XPT_TERM_IO:		/* Terminate the I/O process */
1937 		/* XXX Implement */
1938 		ccb->ccb_h.status = CAM_REQ_INVALID;
1939 		break;
1940 	case XPT_PATH_INQ:		/* Path routing inquiry */
1941 	{
1942 		struct ccb_pathinq *cpi = &ccb->cpi;
1943 
1944 		parent = device_get_parent(dev);
1945 		cpi->version_num = 1; /* XXX??? */
1946 		cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE;
1947 		cpi->hba_inquiry |= PI_SATAPM;
1948 		cpi->target_sprt = 0;
1949 		cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED;
1950 		cpi->hba_eng_cnt = 0;
1951 		cpi->max_target = 15;
1952 		cpi->max_lun = 0;
1953 		cpi->initiator_id = 0;
1954 		cpi->bus_id = cam_sim_bus(sim);
1955 		cpi->base_transfer_speed = 150000;
1956 		strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
1957 		strncpy(cpi->hba_vid, "SIIS", HBA_IDLEN);
1958 		strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
1959 		cpi->unit_number = cam_sim_unit(sim);
1960 		cpi->transport = XPORT_SATA;
1961 		cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
1962 		cpi->protocol = PROTO_ATA;
1963 		cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
1964 		cpi->maxio = MAXPHYS;
1965 		cpi->hba_vendor = pci_get_vendor(parent);
1966 		cpi->hba_device = pci_get_device(parent);
1967 		cpi->hba_subvendor = pci_get_subvendor(parent);
1968 		cpi->hba_subdevice = pci_get_subdevice(parent);
1969 		cpi->ccb_h.status = CAM_REQ_CMP;
1970 		break;
1971 	}
1972 	default:
1973 		ccb->ccb_h.status = CAM_REQ_INVALID;
1974 		break;
1975 	}
1976 	xpt_done(ccb);
1977 }
1978 
1979 static void
1980 siispoll(struct cam_sim *sim)
1981 {
1982 	struct siis_channel *ch = (struct siis_channel *)cam_sim_softc(sim);
1983 
1984 	siis_ch_intr(ch->dev);
1985 }
1986