1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright 2008-2018 Solarflare Communications Inc. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 /* 31 * This file is automatically generated. DO NOT EDIT IT. 32 * To make changes, edit the .yml files under firmwaresrc doc/mcdi/ and 33 * rebuild this file with "make -C doc mcdiheaders". 34 * 35 * The version of this file has MCDI strings really used in the libefx. 36 */ 37 38 #ifndef _SYS_EFX_REGS_MCDI_STRS_H 39 #define _SYS_EFX_REGS_MCDI_STRS_H 40 41 #define MC_CMD_SENSOR_CONTROLLER_TEMP_ENUM_STR "Controller temperature: degC" 42 #define MC_CMD_SENSOR_PHY_COMMON_TEMP_ENUM_STR "Phy common temperature: degC" 43 #define MC_CMD_SENSOR_CONTROLLER_COOLING_ENUM_STR "Controller cooling: bool" 44 #define MC_CMD_SENSOR_PHY0_TEMP_ENUM_STR "Phy 0 temperature: degC" 45 #define MC_CMD_SENSOR_PHY0_COOLING_ENUM_STR "Phy 0 cooling: bool" 46 #define MC_CMD_SENSOR_PHY1_TEMP_ENUM_STR "Phy 1 temperature: degC" 47 #define MC_CMD_SENSOR_PHY1_COOLING_ENUM_STR "Phy 1 cooling: bool" 48 #define MC_CMD_SENSOR_IN_1V0_ENUM_STR "1.0v power: mV" 49 #define MC_CMD_SENSOR_IN_1V2_ENUM_STR "1.2v power: mV" 50 #define MC_CMD_SENSOR_IN_1V8_ENUM_STR "1.8v power: mV" 51 #define MC_CMD_SENSOR_IN_2V5_ENUM_STR "2.5v power: mV" 52 #define MC_CMD_SENSOR_IN_3V3_ENUM_STR "3.3v power: mV" 53 #define MC_CMD_SENSOR_IN_12V0_ENUM_STR "12v power: mV" 54 #define MC_CMD_SENSOR_IN_1V2A_ENUM_STR "1.2v analogue power: mV" 55 #define MC_CMD_SENSOR_IN_VREF_ENUM_STR "reference voltage: mV" 56 #define MC_CMD_SENSOR_OUT_VAOE_ENUM_STR "AOE FPGA power: mV" 57 #define MC_CMD_SENSOR_AOE_TEMP_ENUM_STR "AOE FPGA temperature: degC" 58 #define MC_CMD_SENSOR_PSU_AOE_TEMP_ENUM_STR "AOE FPGA PSU temperature: degC" 59 #define MC_CMD_SENSOR_PSU_TEMP_ENUM_STR "AOE PSU temperature: degC" 60 #define MC_CMD_SENSOR_FAN_0_ENUM_STR "Fan 0 speed: RPM" 61 #define MC_CMD_SENSOR_FAN_1_ENUM_STR "Fan 1 speed: RPM" 62 #define MC_CMD_SENSOR_FAN_2_ENUM_STR "Fan 2 speed: RPM" 63 #define MC_CMD_SENSOR_FAN_3_ENUM_STR "Fan 3 speed: RPM" 64 #define MC_CMD_SENSOR_FAN_4_ENUM_STR "Fan 4 speed: RPM" 65 #define MC_CMD_SENSOR_IN_VAOE_ENUM_STR "AOE FPGA input power: mV" 66 #define MC_CMD_SENSOR_OUT_IAOE_ENUM_STR "AOE FPGA current: mA" 67 #define MC_CMD_SENSOR_IN_IAOE_ENUM_STR "AOE FPGA input current: mA" 68 #define MC_CMD_SENSOR_NIC_POWER_ENUM_STR "NIC power consumption: W" 69 #define MC_CMD_SENSOR_IN_0V9_ENUM_STR "0.9v power voltage: mV" 70 #define MC_CMD_SENSOR_IN_I0V9_ENUM_STR "0.9v power current: mA" 71 #define MC_CMD_SENSOR_IN_I1V2_ENUM_STR "1.2v power current: mA" 72 #define MC_CMD_SENSOR_PAGE0_NEXT_ENUM_STR "Not a sensor: reserved for the next page flag" 73 #define MC_CMD_SENSOR_IN_0V9_ADC_ENUM_STR "0.9v power voltage (at ADC): mV" 74 #define MC_CMD_SENSOR_CONTROLLER_2_TEMP_ENUM_STR "Controller temperature 2: degC" 75 #define MC_CMD_SENSOR_VREG_INTERNAL_TEMP_ENUM_STR "Voltage regulator internal temperature: degC" 76 #define MC_CMD_SENSOR_VREG_0V9_TEMP_ENUM_STR "0.9V voltage regulator temperature: degC" 77 #define MC_CMD_SENSOR_VREG_1V2_TEMP_ENUM_STR "1.2V voltage regulator temperature: degC" 78 #define MC_CMD_SENSOR_CONTROLLER_VPTAT_ENUM_STR "controller internal temperature sensor voltage (internal ADC): mV" 79 #define MC_CMD_SENSOR_CONTROLLER_INTERNAL_TEMP_ENUM_STR "controller internal temperature (internal ADC): degC" 80 #define MC_CMD_SENSOR_CONTROLLER_VPTAT_EXTADC_ENUM_STR "controller internal temperature sensor voltage (external ADC): mV" 81 #define MC_CMD_SENSOR_CONTROLLER_INTERNAL_TEMP_EXTADC_ENUM_STR "controller internal temperature (external ADC): degC" 82 #define MC_CMD_SENSOR_AMBIENT_TEMP_ENUM_STR "ambient temperature: degC" 83 #define MC_CMD_SENSOR_AIRFLOW_ENUM_STR "air flow: bool" 84 #define MC_CMD_SENSOR_VDD08D_VSS08D_CSR_ENUM_STR "voltage between VSS08D and VSS08D at CSR: mV" 85 #define MC_CMD_SENSOR_VDD08D_VSS08D_CSR_EXTADC_ENUM_STR "voltage between VSS08D and VSS08D at CSR (external ADC): mV" 86 #define MC_CMD_SENSOR_HOTPOINT_TEMP_ENUM_STR "Hotpoint temperature: degC" 87 #define MC_CMD_SENSOR_PHY_POWER_PORT0_ENUM_STR "Port 0 PHY power switch over-current: bool" 88 #define MC_CMD_SENSOR_PHY_POWER_PORT1_ENUM_STR "Port 1 PHY power switch over-current: bool" 89 #define MC_CMD_SENSOR_MUM_VCC_ENUM_STR "Mop-up microcontroller reference voltage: mV" 90 #define MC_CMD_SENSOR_IN_0V9_A_ENUM_STR "0.9v power phase A voltage: mV" 91 #define MC_CMD_SENSOR_IN_I0V9_A_ENUM_STR "0.9v power phase A current: mA" 92 #define MC_CMD_SENSOR_VREG_0V9_A_TEMP_ENUM_STR "0.9V voltage regulator phase A temperature: degC" 93 #define MC_CMD_SENSOR_IN_0V9_B_ENUM_STR "0.9v power phase B voltage: mV" 94 #define MC_CMD_SENSOR_IN_I0V9_B_ENUM_STR "0.9v power phase B current: mA" 95 #define MC_CMD_SENSOR_VREG_0V9_B_TEMP_ENUM_STR "0.9V voltage regulator phase B temperature: degC" 96 #define MC_CMD_SENSOR_CCOM_AVREG_1V2_SUPPLY_ENUM_STR "CCOM AVREG 1v2 supply (interval ADC): mV" 97 #define MC_CMD_SENSOR_CCOM_AVREG_1V2_SUPPLY_EXTADC_ENUM_STR "CCOM AVREG 1v2 supply (external ADC): mV" 98 #define MC_CMD_SENSOR_CCOM_AVREG_1V8_SUPPLY_ENUM_STR "CCOM AVREG 1v8 supply (interval ADC): mV" 99 #define MC_CMD_SENSOR_CCOM_AVREG_1V8_SUPPLY_EXTADC_ENUM_STR "CCOM AVREG 1v8 supply (external ADC): mV" 100 #define MC_CMD_SENSOR_CONTROLLER_RTS_ENUM_STR "CCOM RTS temperature: degC" 101 #define MC_CMD_SENSOR_PAGE1_NEXT_ENUM_STR "Not a sensor: reserved for the next page flag" 102 #define MC_CMD_SENSOR_CONTROLLER_MASTER_VPTAT_ENUM_STR "controller internal temperature sensor voltage on master core (internal ADC): mV" 103 #define MC_CMD_SENSOR_CONTROLLER_MASTER_INTERNAL_TEMP_ENUM_STR "controller internal temperature on master core (internal ADC): degC" 104 #define MC_CMD_SENSOR_CONTROLLER_MASTER_VPTAT_EXTADC_ENUM_STR "controller internal temperature sensor voltage on master core (external ADC): mV" 105 #define MC_CMD_SENSOR_CONTROLLER_MASTER_INTERNAL_TEMP_EXTADC_ENUM_STR "controller internal temperature on master core (external ADC): degC" 106 #define MC_CMD_SENSOR_CONTROLLER_SLAVE_VPTAT_ENUM_STR "controller internal temperature on slave core sensor voltage (internal ADC): mV" 107 #define MC_CMD_SENSOR_CONTROLLER_SLAVE_INTERNAL_TEMP_ENUM_STR "controller internal temperature on slave core (internal ADC): degC" 108 #define MC_CMD_SENSOR_CONTROLLER_SLAVE_VPTAT_EXTADC_ENUM_STR "controller internal temperature on slave core sensor voltage (external ADC): mV" 109 #define MC_CMD_SENSOR_CONTROLLER_SLAVE_INTERNAL_TEMP_EXTADC_ENUM_STR "controller internal temperature on slave core (external ADC): degC" 110 #define MC_CMD_SENSOR_SODIMM_VOUT_ENUM_STR "Voltage supplied to the SODIMMs from their power supply: mV" 111 #define MC_CMD_SENSOR_SODIMM_0_TEMP_ENUM_STR "Temperature of SODIMM 0 (if installed): degC" 112 #define MC_CMD_SENSOR_SODIMM_1_TEMP_ENUM_STR "Temperature of SODIMM 1 (if installed): degC" 113 #define MC_CMD_SENSOR_PHY0_VCC_ENUM_STR "Voltage supplied to the QSFP #0 from their power supply: mV" 114 #define MC_CMD_SENSOR_PHY1_VCC_ENUM_STR "Voltage supplied to the QSFP #1 from their power supply: mV" 115 #define MC_CMD_SENSOR_CONTROLLER_TDIODE_TEMP_ENUM_STR "Controller die temperature (TDIODE): degC" 116 #define MC_CMD_SENSOR_BOARD_FRONT_TEMP_ENUM_STR "Board temperature (front): degC" 117 #define MC_CMD_SENSOR_BOARD_BACK_TEMP_ENUM_STR "Board temperature (back): degC" 118 #define MC_CMD_SENSOR_IN_I1V8_ENUM_STR "1.8v power current: mA" 119 #define MC_CMD_SENSOR_IN_I2V5_ENUM_STR "2.5v power current: mA" 120 #define MC_CMD_SENSOR_IN_I3V3_ENUM_STR "3.3v power current: mA" 121 #define MC_CMD_SENSOR_IN_I12V0_ENUM_STR "12v power current: mA" 122 #define MC_CMD_SENSOR_IN_1V3_ENUM_STR "1.3v power: mV" 123 #define MC_CMD_SENSOR_IN_I1V3_ENUM_STR "1.3v power current: mA" 124 125 #endif /* _SYS_EFX_REGS_MCDI_STRS_H */ 126