1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2018 Rubicon Communications, LLC (Netgate) 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 /* 29 * Marvell Xenon SDHCI controller driver. 30 */ 31 32 #include <sys/cdefs.h> 33 __FBSDID("$FreeBSD$"); 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/bus.h> 38 #include <sys/kernel.h> 39 #include <sys/lock.h> 40 #include <sys/malloc.h> 41 #include <sys/module.h> 42 #include <sys/mutex.h> 43 #include <sys/resource.h> 44 #include <sys/rman.h> 45 #include <sys/sysctl.h> 46 #include <sys/taskqueue.h> 47 48 #include <machine/bus.h> 49 #include <machine/resource.h> 50 51 #include <dev/extres/regulator/regulator.h> 52 53 #include <dev/mmc/bridge.h> 54 #include <dev/mmc/mmcbrvar.h> 55 #include <dev/mmc/mmcreg.h> 56 57 #include <dev/sdhci/sdhci.h> 58 #include <dev/sdhci/sdhci_xenon.h> 59 60 #include "mmcbr_if.h" 61 #include "sdhci_if.h" 62 63 #include "opt_mmccam.h" 64 #include "opt_soc.h" 65 66 #define MAX_SLOTS 6 67 68 static uint8_t 69 sdhci_xenon_read_1(device_t dev, struct sdhci_slot *slot __unused, 70 bus_size_t off) 71 { 72 struct sdhci_xenon_softc *sc = device_get_softc(dev); 73 74 return (bus_read_1(sc->mem_res, off)); 75 } 76 77 static void 78 sdhci_xenon_write_1(device_t dev, struct sdhci_slot *slot __unused, 79 bus_size_t off, uint8_t val) 80 { 81 struct sdhci_xenon_softc *sc = device_get_softc(dev); 82 83 bus_write_1(sc->mem_res, off, val); 84 } 85 86 static uint16_t 87 sdhci_xenon_read_2(device_t dev, struct sdhci_slot *slot __unused, 88 bus_size_t off) 89 { 90 struct sdhci_xenon_softc *sc = device_get_softc(dev); 91 92 return (bus_read_2(sc->mem_res, off)); 93 } 94 95 static void 96 sdhci_xenon_write_2(device_t dev, struct sdhci_slot *slot __unused, 97 bus_size_t off, uint16_t val) 98 { 99 struct sdhci_xenon_softc *sc = device_get_softc(dev); 100 101 bus_write_2(sc->mem_res, off, val); 102 } 103 104 static uint32_t 105 sdhci_xenon_read_4(device_t dev, struct sdhci_slot *slot __unused, 106 bus_size_t off) 107 { 108 struct sdhci_xenon_softc *sc = device_get_softc(dev); 109 110 return bus_read_4(sc->mem_res, off); 111 } 112 113 static void 114 sdhci_xenon_write_4(device_t dev, struct sdhci_slot *slot __unused, 115 bus_size_t off, uint32_t val) 116 { 117 struct sdhci_xenon_softc *sc = device_get_softc(dev); 118 119 bus_write_4(sc->mem_res, off, val); 120 } 121 122 static void 123 sdhci_xenon_read_multi_4(device_t dev, struct sdhci_slot *slot __unused, 124 bus_size_t off, uint32_t *data, bus_size_t count) 125 { 126 struct sdhci_xenon_softc *sc = device_get_softc(dev); 127 128 bus_read_multi_4(sc->mem_res, off, data, count); 129 } 130 131 static void 132 sdhci_xenon_write_multi_4(device_t dev, struct sdhci_slot *slot __unused, 133 bus_size_t off, uint32_t *data, bus_size_t count) 134 { 135 struct sdhci_xenon_softc *sc = device_get_softc(dev); 136 137 bus_write_multi_4(sc->mem_res, off, data, count); 138 } 139 140 static void 141 sdhci_xenon_intr(void *arg) 142 { 143 struct sdhci_xenon_softc *sc = (struct sdhci_xenon_softc *)arg; 144 145 sdhci_generic_intr(sc->slot); 146 } 147 148 static int 149 sdhci_xenon_get_ro(device_t bus, device_t dev) 150 { 151 struct sdhci_xenon_softc *sc = device_get_softc(bus); 152 153 return (sdhci_generic_get_ro(bus, dev) ^ sc->wp_inverted); 154 } 155 156 static void 157 sdhci_xenon_set_uhs_timing(device_t brdev, struct sdhci_slot *slot) 158 { 159 const struct mmc_ios *ios; 160 uint16_t hostctrl2; 161 162 if (slot->version < SDHCI_SPEC_300) 163 return; 164 165 mtx_assert(&slot->mtx, MA_OWNED); 166 ios = &slot->host.ios; 167 168 /* Update timing parameteres in SDHCI_HOST_CONTROL2 register. */ 169 hostctrl2 = sdhci_xenon_read_2(brdev, slot, SDHCI_HOST_CONTROL2); 170 hostctrl2 &= ~SDHCI_CTRL2_UHS_MASK; 171 if (ios->clock > SD_SDR50_MAX) { 172 if (ios->timing == bus_timing_mmc_hs400 || 173 ios->timing == bus_timing_mmc_hs400es) 174 hostctrl2 |= XENON_CTRL2_MMC_HS400; 175 else if (ios->timing == bus_timing_mmc_hs200) 176 hostctrl2 |= XENON_CTRL2_MMC_HS200; 177 else 178 hostctrl2 |= SDHCI_CTRL2_UHS_SDR104; 179 } 180 else if (ios->clock > SD_SDR25_MAX) 181 hostctrl2 |= SDHCI_CTRL2_UHS_SDR50; 182 else if (ios->clock > SD_SDR12_MAX) { 183 if (ios->timing == bus_timing_uhs_ddr50 || 184 ios->timing == bus_timing_mmc_ddr52) 185 hostctrl2 |= SDHCI_CTRL2_UHS_DDR50; 186 else 187 hostctrl2 |= SDHCI_CTRL2_UHS_SDR25; 188 } else if (ios->clock > SD_MMC_CARD_ID_FREQUENCY) 189 hostctrl2 |= SDHCI_CTRL2_UHS_SDR12; 190 sdhci_xenon_write_2(brdev, slot, SDHCI_HOST_CONTROL2, hostctrl2); 191 } 192 193 static int 194 sdhci_xenon_phy_init(device_t brdev, struct mmc_ios *ios) 195 { 196 int i; 197 struct sdhci_xenon_softc *sc; 198 uint32_t reg; 199 200 sc = device_get_softc(brdev); 201 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST); 202 reg |= XENON_SAMPL_INV_QSP_PHASE_SELECT; 203 switch (ios->timing) { 204 case bus_timing_normal: 205 case bus_timing_hs: 206 case bus_timing_uhs_sdr12: 207 case bus_timing_uhs_sdr25: 208 case bus_timing_uhs_sdr50: 209 reg |= XENON_TIMING_ADJUST_SLOW_MODE; 210 break; 211 default: 212 reg &= ~XENON_TIMING_ADJUST_SLOW_MODE; 213 } 214 if (sc->slow_mode) 215 reg |= XENON_TIMING_ADJUST_SLOW_MODE; 216 bus_write_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST, reg); 217 218 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST); 219 reg |= XENON_PHY_INITIALIZATION; 220 bus_write_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST, reg); 221 222 /* Wait for the eMMC PHY init. */ 223 for (i = 100; i > 0; i--) { 224 DELAY(100); 225 226 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST); 227 if ((reg & XENON_PHY_INITIALIZATION) == 0) 228 break; 229 } 230 231 if (i == 0) { 232 device_printf(brdev, "eMMC PHY failed to initialize\n"); 233 return (ETIMEDOUT); 234 } 235 236 return (0); 237 } 238 239 static int 240 sdhci_xenon_phy_set(device_t brdev, struct mmc_ios *ios) 241 { 242 struct sdhci_xenon_softc *sc; 243 uint32_t reg; 244 245 sc = device_get_softc(brdev); 246 /* Setup pad, set bit[28] and bits[26:24] */ 247 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL); 248 reg |= (XENON_FC_DQ_RECEN | XENON_FC_CMD_RECEN | 249 XENON_FC_QSP_RECEN | XENON_OEN_QSN); 250 /* All FC_XX_RECEIVCE should be set as CMOS Type */ 251 reg |= XENON_FC_ALL_CMOS_RECEIVER; 252 bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL, reg); 253 254 /* Set CMD and DQ Pull Up */ 255 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1); 256 reg |= (XENON_EMMC_FC_CMD_PU | XENON_EMMC_FC_DQ_PU); 257 reg &= ~(XENON_EMMC_FC_CMD_PD | XENON_EMMC_FC_DQ_PD); 258 bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1, reg); 259 260 if (ios->timing == bus_timing_normal) 261 return (sdhci_xenon_phy_init(brdev, ios)); 262 263 /* Clear SDIO mode, no SDIO support for now. */ 264 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST); 265 reg &= ~XENON_TIMING_ADJUST_SDIO_MODE; 266 bus_write_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST, reg); 267 268 /* 269 * Set preferred ZNR and ZPR value. 270 * The ZNR and ZPR value vary between different boards. 271 * Define them both in the DTS for the board! 272 */ 273 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL2); 274 reg &= ~((XENON_ZNR_MASK << XENON_ZNR_SHIFT) | XENON_ZPR_MASK); 275 reg |= ((sc->znr << XENON_ZNR_SHIFT) | sc->zpr); 276 bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL2, reg); 277 278 /* Disable the SD clock to set EMMC_PHY_FUNC_CONTROL. */ 279 reg = bus_read_4(sc->mem_res, SDHCI_CLOCK_CONTROL); 280 reg &= ~SDHCI_CLOCK_CARD_EN; 281 bus_write_4(sc->mem_res, SDHCI_CLOCK_CONTROL, reg); 282 283 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_FUNC_CONTROL); 284 switch (ios->timing) { 285 case bus_timing_mmc_hs400: 286 reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) | 287 XENON_CMD_DDR_MODE; 288 reg &= ~XENON_DQ_ASYNC_MODE; 289 break; 290 case bus_timing_uhs_ddr50: 291 case bus_timing_mmc_ddr52: 292 reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) | 293 XENON_CMD_DDR_MODE | XENON_DQ_ASYNC_MODE; 294 break; 295 default: 296 reg &= ~((XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) | 297 XENON_CMD_DDR_MODE); 298 reg |= XENON_DQ_ASYNC_MODE; 299 } 300 bus_write_4(sc->mem_res, XENON_EMMC_PHY_FUNC_CONTROL, reg); 301 302 /* Enable SD clock. */ 303 reg = bus_read_4(sc->mem_res, SDHCI_CLOCK_CONTROL); 304 reg |= SDHCI_CLOCK_CARD_EN; 305 bus_write_4(sc->mem_res, SDHCI_CLOCK_CONTROL, reg); 306 307 if (ios->timing == bus_timing_mmc_hs400) 308 bus_write_4(sc->mem_res, XENON_EMMC_PHY_LOGIC_TIMING_ADJUST, 309 XENON_LOGIC_TIMING_VALUE); 310 else { 311 /* Disable both SDHC Data Strobe and Enhanced Strobe. */ 312 reg = bus_read_4(sc->mem_res, XENON_SLOT_EMMC_CTRL); 313 reg &= ~(XENON_ENABLE_DATA_STROBE | XENON_ENABLE_RESP_STROBE); 314 bus_write_4(sc->mem_res, XENON_SLOT_EMMC_CTRL, reg); 315 316 /* Clear Strobe line Pull down or Pull up. */ 317 reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1); 318 reg &= ~(XENON_EMMC_FC_QSP_PD | XENON_EMMC_FC_QSP_PU); 319 bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1, reg); 320 } 321 322 return (sdhci_xenon_phy_init(brdev, ios)); 323 } 324 325 static int 326 sdhci_xenon_update_ios(device_t brdev, device_t reqdev) 327 { 328 int err; 329 struct sdhci_xenon_softc *sc; 330 struct mmc_ios *ios; 331 struct sdhci_slot *slot; 332 uint32_t reg; 333 334 err = sdhci_generic_update_ios(brdev, reqdev); 335 if (err != 0) 336 return (err); 337 338 sc = device_get_softc(brdev); 339 slot = device_get_ivars(reqdev); 340 ios = &slot->host.ios; 341 342 switch (ios->power_mode) { 343 case power_on: 344 break; 345 case power_off: 346 if (bootverbose) 347 device_printf(sc->dev, "Powering down sd/mmc\n"); 348 349 if (sc->vmmc_supply) 350 regulator_disable(sc->vmmc_supply); 351 if (sc->vqmmc_supply) 352 regulator_disable(sc->vqmmc_supply); 353 break; 354 case power_up: 355 if (bootverbose) 356 device_printf(sc->dev, "Powering up sd/mmc\n"); 357 358 if (sc->vmmc_supply) 359 regulator_enable(sc->vmmc_supply); 360 if (sc->vqmmc_supply) 361 regulator_enable(sc->vqmmc_supply); 362 break; 363 }; 364 365 /* Update the PHY settings. */ 366 if (ios->clock != 0) 367 sdhci_xenon_phy_set(brdev, ios); 368 369 if (ios->clock > SD_MMC_CARD_ID_FREQUENCY) { 370 /* Enable SDCLK_IDLEOFF. */ 371 reg = bus_read_4(sc->mem_res, XENON_SYS_OP_CTRL); 372 reg |= 1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sc->slot_id); 373 bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg); 374 } 375 376 return (0); 377 } 378 379 static int 380 sdhci_xenon_switch_vccq(device_t brdev, device_t reqdev) 381 { 382 struct sdhci_xenon_softc *sc; 383 struct sdhci_slot *slot; 384 uint16_t hostctrl2; 385 int uvolt, err; 386 387 slot = device_get_ivars(reqdev); 388 389 if (slot->version < SDHCI_SPEC_300) 390 return (0); 391 392 sc = device_get_softc(brdev); 393 394 if (sc->vqmmc_supply == NULL && !sc->skip_regulators) 395 return (EOPNOTSUPP); 396 397 err = 0; 398 399 hostctrl2 = bus_read_2(sc->mem_res, SDHCI_HOST_CONTROL2); 400 switch (slot->host.ios.vccq) { 401 case vccq_330: 402 if (!(hostctrl2 & SDHCI_CTRL2_S18_ENABLE)) 403 return (0); 404 hostctrl2 &= ~SDHCI_CTRL2_S18_ENABLE; 405 bus_write_2(sc->mem_res, SDHCI_HOST_CONTROL2, hostctrl2); 406 407 if (!sc->skip_regulators) { 408 uvolt = 3300000; 409 err = regulator_set_voltage(sc->vqmmc_supply, 410 uvolt, uvolt); 411 if (err != 0) { 412 device_printf(sc->dev, 413 "Cannot set vqmmc to %d<->%d\n", 414 uvolt, 415 uvolt); 416 return (err); 417 } 418 } 419 420 /* 421 * According to the 'SD Host Controller Simplified 422 * Specification 4.20 the host driver should take more 423 * than 5ms for stable time of host voltage regulator 424 * from changing 1.8V Signaling Enable. 425 */ 426 DELAY(5000); 427 hostctrl2 = bus_read_2(sc->mem_res, SDHCI_HOST_CONTROL2); 428 if (!(hostctrl2 & SDHCI_CTRL2_S18_ENABLE)) 429 return (0); 430 return (EAGAIN); 431 case vccq_180: 432 if (!(slot->host.caps & MMC_CAP_SIGNALING_180)) { 433 return (EINVAL); 434 } 435 if (hostctrl2 & SDHCI_CTRL2_S18_ENABLE) 436 return (0); 437 hostctrl2 |= SDHCI_CTRL2_S18_ENABLE; 438 bus_write_2(sc->mem_res, SDHCI_HOST_CONTROL2, hostctrl2); 439 440 if (!sc->skip_regulators) { 441 uvolt = 1800000; 442 err = regulator_set_voltage(sc->vqmmc_supply, 443 uvolt, uvolt); 444 if (err != 0) { 445 device_printf(sc->dev, 446 "Cannot set vqmmc to %d<->%d\n", 447 uvolt, 448 uvolt); 449 return (err); 450 } 451 } 452 453 /* 454 * According to the 'SD Host Controller Simplified 455 * Specification 4.20 the host driver should take more 456 * than 5ms for stable time of host voltage regulator 457 * from changing 1.8V Signaling Enable. 458 */ 459 DELAY(5000); 460 hostctrl2 = bus_read_2(sc->mem_res, SDHCI_HOST_CONTROL2); 461 if (hostctrl2 & SDHCI_CTRL2_S18_ENABLE) 462 return (0); 463 return (EAGAIN); 464 default: 465 device_printf(brdev, 466 "Attempt to set unsupported signaling voltage\n"); 467 return (EINVAL); 468 } 469 } 470 471 static void 472 sdhci_xenon_parse_prop(device_t dev) 473 { 474 struct sdhci_xenon_softc *sc; 475 uint32_t val; 476 477 sc = device_get_softc(dev); 478 val = 0; 479 480 if (device_get_property(dev, "quirks", 481 &val, sizeof(val), DEVICE_PROP_UINT32) > 0) 482 sc->slot->quirks = val; 483 sc->znr = XENON_ZNR_DEF_VALUE; 484 if (device_get_property(dev, "marvell,xenon-phy-znr", 485 &val, sizeof(val), DEVICE_PROP_UINT32) > 0) 486 sc->znr = val & XENON_ZNR_MASK; 487 sc->zpr = XENON_ZPR_DEF_VALUE; 488 if (device_get_property(dev, "marvell,xenon-phy-zpr", 489 &val, sizeof(val), DEVICE_PROP_UINT32) > 0) 490 sc->zpr = val & XENON_ZPR_MASK; 491 if (device_has_property(dev, "marvell,xenon-phy-slow-mode")) 492 sc->slow_mode = true; 493 } 494 495 int 496 sdhci_xenon_attach(device_t dev) 497 { 498 struct sdhci_xenon_softc *sc = device_get_softc(dev); 499 int err, rid; 500 uint32_t reg; 501 502 sc->dev = dev; 503 sc->slot_id = 0; 504 505 /* Allocate IRQ. */ 506 rid = 0; 507 sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 508 RF_ACTIVE); 509 if (sc->irq_res == NULL) { 510 device_printf(dev, "Can't allocate IRQ\n"); 511 return (ENOMEM); 512 } 513 514 /* Allocate memory. */ 515 rid = 0; 516 sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 517 &rid, RF_ACTIVE); 518 if (sc->mem_res == NULL) { 519 bus_release_resource(dev, SYS_RES_IRQ, 520 rman_get_rid(sc->irq_res), sc->irq_res); 521 device_printf(dev, "Can't allocate memory for slot\n"); 522 return (ENOMEM); 523 } 524 525 sdhci_xenon_parse_prop(dev); 526 527 sc->slot->max_clk = XENON_MMC_MAX_CLK; 528 if (sc->slot->host.f_max > 0) 529 sc->slot->max_clk = sc->slot->host.f_max; 530 531 if (sdhci_init_slot(dev, sc->slot, 0)) 532 goto fail; 533 534 /* 1.2V signaling is not supported. */ 535 sc->slot->host.caps &= ~MMC_CAP_SIGNALING_120; 536 537 /* Disable UHS in case of the PHY slow mode. */ 538 if (sc->slow_mode) 539 sc->slot->host.caps &= ~MMC_CAP_SIGNALING_180; 540 541 /* Activate the interrupt */ 542 err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE, 543 NULL, sdhci_xenon_intr, sc, &sc->intrhand); 544 if (err) { 545 device_printf(dev, "Cannot setup IRQ\n"); 546 goto fail; 547 } 548 549 /* Disable Auto Clock Gating. */ 550 reg = bus_read_4(sc->mem_res, XENON_SYS_OP_CTRL); 551 reg |= XENON_AUTO_CLKGATE_DISABLE; 552 bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg); 553 554 /* Enable this SD controller. */ 555 reg |= (1 << sc->slot_id); 556 bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg); 557 558 /* Enable Parallel Transfer. */ 559 reg = bus_read_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL); 560 reg |= (1 << sc->slot_id); 561 bus_write_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL, reg); 562 563 /* Enable Auto Clock Gating. */ 564 reg &= ~XENON_AUTO_CLKGATE_DISABLE; 565 bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg); 566 567 /* Disable SDCLK_IDLEOFF before the card initialization. */ 568 reg = bus_read_4(sc->mem_res, XENON_SYS_OP_CTRL); 569 reg &= ~(1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sc->slot_id)); 570 bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg); 571 572 /* Mask command conflict errors. */ 573 reg = bus_read_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL); 574 reg |= XENON_MASK_CMD_CONFLICT_ERR; 575 bus_write_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL, reg); 576 577 /* Process cards detection. */ 578 sdhci_start_slot(sc->slot); 579 580 return (0); 581 582 fail: 583 bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq_res), 584 sc->irq_res); 585 bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem_res), 586 sc->mem_res); 587 free(sc->slot, M_DEVBUF); 588 sc->slot = NULL; 589 590 return (ENXIO); 591 } 592 593 int 594 sdhci_xenon_detach(device_t dev) 595 { 596 struct sdhci_xenon_softc *sc = device_get_softc(dev); 597 598 bus_generic_detach(dev); 599 bus_teardown_intr(dev, sc->irq_res, sc->intrhand); 600 bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq_res), 601 sc->irq_res); 602 sdhci_cleanup_slot(sc->slot); 603 bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem_res), 604 sc->mem_res); 605 free(sc->slot, M_DEVBUF); 606 sc->slot = NULL; 607 608 return (0); 609 } 610 611 static device_method_t sdhci_xenon_methods[] = { 612 /* Bus interface */ 613 DEVMETHOD(bus_read_ivar, sdhci_generic_read_ivar), 614 DEVMETHOD(bus_write_ivar, sdhci_generic_write_ivar), 615 616 /* mmcbr_if */ 617 DEVMETHOD(mmcbr_update_ios, sdhci_xenon_update_ios), 618 DEVMETHOD(mmcbr_request, sdhci_generic_request), 619 DEVMETHOD(mmcbr_get_ro, sdhci_xenon_get_ro), 620 DEVMETHOD(mmcbr_acquire_host, sdhci_generic_acquire_host), 621 DEVMETHOD(mmcbr_release_host, sdhci_generic_release_host), 622 DEVMETHOD(mmcbr_switch_vccq, sdhci_xenon_switch_vccq), 623 DEVMETHOD(mmcbr_tune, sdhci_generic_tune), 624 DEVMETHOD(mmcbr_retune, sdhci_generic_retune), 625 626 /* SDHCI registers accessors */ 627 DEVMETHOD(sdhci_read_1, sdhci_xenon_read_1), 628 DEVMETHOD(sdhci_read_2, sdhci_xenon_read_2), 629 DEVMETHOD(sdhci_read_4, sdhci_xenon_read_4), 630 DEVMETHOD(sdhci_read_multi_4, sdhci_xenon_read_multi_4), 631 DEVMETHOD(sdhci_write_1, sdhci_xenon_write_1), 632 DEVMETHOD(sdhci_write_2, sdhci_xenon_write_2), 633 DEVMETHOD(sdhci_write_4, sdhci_xenon_write_4), 634 DEVMETHOD(sdhci_write_multi_4, sdhci_xenon_write_multi_4), 635 DEVMETHOD(sdhci_set_uhs_timing, sdhci_xenon_set_uhs_timing), 636 637 DEVMETHOD_END 638 }; 639 640 DEFINE_CLASS_0(sdhci_xenon, sdhci_xenon_driver, sdhci_xenon_methods, 641 sizeof(struct sdhci_xenon_softc)); 642 643 SDHCI_DEPEND(sdhci_xenon); 644 #ifndef MMCCAM 645 MMC_DECLARE_BRIDGE(sdhci_xenon); 646 #endif 647