1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2008 Alexander Motin <mav@FreeBSD.org> 5 * Copyright (c) 2017 Marius Strobl <marius@FreeBSD.org> 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/bus.h> 35 #include <sys/callout.h> 36 #include <sys/conf.h> 37 #include <sys/kernel.h> 38 #include <sys/kobj.h> 39 #include <sys/libkern.h> 40 #include <sys/lock.h> 41 #include <sys/malloc.h> 42 #include <sys/module.h> 43 #include <sys/mutex.h> 44 #include <sys/resource.h> 45 #include <sys/rman.h> 46 #include <sys/sysctl.h> 47 #include <sys/taskqueue.h> 48 #include <sys/sbuf.h> 49 50 #include <machine/bus.h> 51 #include <machine/resource.h> 52 #include <machine/stdarg.h> 53 54 #include <dev/mmc/bridge.h> 55 #include <dev/mmc/mmcreg.h> 56 #include <dev/mmc/mmcbrvar.h> 57 58 #include <dev/sdhci/sdhci.h> 59 60 #include <cam/cam.h> 61 #include <cam/cam_ccb.h> 62 #include <cam/cam_debug.h> 63 #include <cam/cam_sim.h> 64 #include <cam/cam_xpt_sim.h> 65 66 #include "mmcbr_if.h" 67 #include "sdhci_if.h" 68 69 #include "opt_mmccam.h" 70 71 SYSCTL_NODE(_hw, OID_AUTO, sdhci, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, 72 "sdhci driver"); 73 74 static int sdhci_debug = 0; 75 SYSCTL_INT(_hw_sdhci, OID_AUTO, debug, CTLFLAG_RWTUN, &sdhci_debug, 0, 76 "Debug level"); 77 u_int sdhci_quirk_clear = 0; 78 SYSCTL_INT(_hw_sdhci, OID_AUTO, quirk_clear, CTLFLAG_RWTUN, &sdhci_quirk_clear, 79 0, "Mask of quirks to clear"); 80 u_int sdhci_quirk_set = 0; 81 SYSCTL_INT(_hw_sdhci, OID_AUTO, quirk_set, CTLFLAG_RWTUN, &sdhci_quirk_set, 0, 82 "Mask of quirks to set"); 83 84 #define RD1(slot, off) SDHCI_READ_1((slot)->bus, (slot), (off)) 85 #define RD2(slot, off) SDHCI_READ_2((slot)->bus, (slot), (off)) 86 #define RD4(slot, off) SDHCI_READ_4((slot)->bus, (slot), (off)) 87 #define RD_MULTI_4(slot, off, ptr, count) \ 88 SDHCI_READ_MULTI_4((slot)->bus, (slot), (off), (ptr), (count)) 89 90 #define WR1(slot, off, val) SDHCI_WRITE_1((slot)->bus, (slot), (off), (val)) 91 #define WR2(slot, off, val) SDHCI_WRITE_2((slot)->bus, (slot), (off), (val)) 92 #define WR4(slot, off, val) SDHCI_WRITE_4((slot)->bus, (slot), (off), (val)) 93 #define WR_MULTI_4(slot, off, ptr, count) \ 94 SDHCI_WRITE_MULTI_4((slot)->bus, (slot), (off), (ptr), (count)) 95 96 static void sdhci_acmd_irq(struct sdhci_slot *slot, uint16_t acmd_err); 97 static void sdhci_card_poll(void *arg); 98 static void sdhci_card_task(void *arg, int pending); 99 static void sdhci_cmd_irq(struct sdhci_slot *slot, uint32_t intmask); 100 static void sdhci_data_irq(struct sdhci_slot *slot, uint32_t intmask); 101 static int sdhci_exec_tuning(struct sdhci_slot *slot, bool reset); 102 static void sdhci_handle_card_present_locked(struct sdhci_slot *slot, 103 bool is_present); 104 static void sdhci_finish_command(struct sdhci_slot *slot); 105 static void sdhci_init(struct sdhci_slot *slot); 106 static void sdhci_read_block_pio(struct sdhci_slot *slot); 107 static void sdhci_req_done(struct sdhci_slot *slot); 108 static void sdhci_req_wakeup(struct mmc_request *req); 109 static void sdhci_retune(void *arg); 110 static void sdhci_set_clock(struct sdhci_slot *slot, uint32_t clock); 111 static void sdhci_set_power(struct sdhci_slot *slot, u_char power); 112 static void sdhci_set_transfer_mode(struct sdhci_slot *slot, 113 const struct mmc_data *data); 114 static void sdhci_start(struct sdhci_slot *slot); 115 static void sdhci_timeout(void *arg); 116 static void sdhci_start_command(struct sdhci_slot *slot, 117 struct mmc_command *cmd); 118 static void sdhci_start_data(struct sdhci_slot *slot, 119 const struct mmc_data *data); 120 static void sdhci_write_block_pio(struct sdhci_slot *slot); 121 static void sdhci_transfer_pio(struct sdhci_slot *slot); 122 123 #ifdef MMCCAM 124 /* CAM-related */ 125 static void sdhci_cam_action(struct cam_sim *sim, union ccb *ccb); 126 static int sdhci_cam_get_possible_host_clock(const struct sdhci_slot *slot, 127 int proposed_clock); 128 static void sdhci_cam_poll(struct cam_sim *sim); 129 static int sdhci_cam_request(struct sdhci_slot *slot, union ccb *ccb); 130 static int sdhci_cam_settran_settings(struct sdhci_slot *slot, union ccb *ccb); 131 static int sdhci_cam_update_ios(struct sdhci_slot *slot); 132 #endif 133 134 /* helper routines */ 135 static int sdhci_dma_alloc(struct sdhci_slot *slot); 136 static void sdhci_dma_free(struct sdhci_slot *slot); 137 static void sdhci_dumpcaps(struct sdhci_slot *slot); 138 static void sdhci_dumpcaps_buf(struct sdhci_slot *slot, struct sbuf *s); 139 static void sdhci_dumpregs(struct sdhci_slot *slot); 140 static void sdhci_dumpregs_buf(struct sdhci_slot *slot, struct sbuf *s); 141 static int sdhci_syctl_dumpcaps(SYSCTL_HANDLER_ARGS); 142 static int sdhci_syctl_dumpregs(SYSCTL_HANDLER_ARGS); 143 static void sdhci_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs, 144 int error); 145 static int slot_printf(const struct sdhci_slot *slot, const char * fmt, ...) 146 __printflike(2, 3); 147 static int slot_sprintf(const struct sdhci_slot *slot, struct sbuf *s, 148 const char * fmt, ...) __printflike(3, 4); 149 static uint32_t sdhci_tuning_intmask(const struct sdhci_slot *slot); 150 151 #define SDHCI_LOCK(_slot) mtx_lock(&(_slot)->mtx) 152 #define SDHCI_UNLOCK(_slot) mtx_unlock(&(_slot)->mtx) 153 #define SDHCI_LOCK_INIT(_slot) \ 154 mtx_init(&_slot->mtx, "SD slot mtx", "sdhci", MTX_DEF) 155 #define SDHCI_LOCK_DESTROY(_slot) mtx_destroy(&_slot->mtx); 156 #define SDHCI_ASSERT_LOCKED(_slot) mtx_assert(&_slot->mtx, MA_OWNED); 157 #define SDHCI_ASSERT_UNLOCKED(_slot) mtx_assert(&_slot->mtx, MA_NOTOWNED); 158 159 #define SDHCI_DEFAULT_MAX_FREQ 50 160 161 #define SDHCI_200_MAX_DIVIDER 256 162 #define SDHCI_300_MAX_DIVIDER 2046 163 164 #define SDHCI_CARD_PRESENT_TICKS (hz / 5) 165 #define SDHCI_INSERT_DELAY_TICKS (hz / 2) 166 167 /* 168 * Broadcom BCM577xx Controller Constants 169 */ 170 /* Maximum divider supported by the default clock source. */ 171 #define BCM577XX_DEFAULT_MAX_DIVIDER 256 172 /* Alternative clock's base frequency. */ 173 #define BCM577XX_ALT_CLOCK_BASE 63000000 174 175 #define BCM577XX_HOST_CONTROL 0x198 176 #define BCM577XX_CTRL_CLKSEL_MASK 0xFFFFCFFF 177 #define BCM577XX_CTRL_CLKSEL_SHIFT 12 178 #define BCM577XX_CTRL_CLKSEL_DEFAULT 0x0 179 #define BCM577XX_CTRL_CLKSEL_64MHZ 0x3 180 181 static void 182 sdhci_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 183 { 184 185 if (error != 0) { 186 printf("getaddr: error %d\n", error); 187 return; 188 } 189 *(bus_addr_t *)arg = segs[0].ds_addr; 190 } 191 192 static int 193 slot_printf(const struct sdhci_slot *slot, const char * fmt, ...) 194 { 195 char buf[128]; 196 va_list ap; 197 int retval; 198 199 /* 200 * Make sure we print a single line all together rather than in two 201 * halves to avoid console gibberish bingo. 202 */ 203 va_start(ap, fmt); 204 retval = vsnprintf(buf, sizeof(buf), fmt, ap); 205 va_end(ap); 206 207 retval += printf("%s-slot%d: %s", 208 device_get_nameunit(slot->bus), slot->num, buf); 209 return (retval); 210 } 211 212 static int 213 slot_sprintf(const struct sdhci_slot *slot, struct sbuf *s, 214 const char * fmt, ...) 215 { 216 va_list ap; 217 int retval; 218 219 retval = sbuf_printf(s, "%s-slot%d: ", device_get_nameunit(slot->bus), slot->num); 220 221 va_start(ap, fmt); 222 retval += sbuf_vprintf(s, fmt, ap); 223 va_end(ap); 224 225 return (retval); 226 } 227 228 static void 229 sdhci_dumpregs_buf(struct sdhci_slot *slot, struct sbuf *s) 230 { 231 slot_sprintf(slot, s, "============== REGISTER DUMP ==============\n"); 232 233 slot_sprintf(slot, s, "Sys addr: 0x%08x | Version: 0x%08x\n", 234 RD4(slot, SDHCI_DMA_ADDRESS), RD2(slot, SDHCI_HOST_VERSION)); 235 slot_sprintf(slot, s, "Blk size: 0x%08x | Blk cnt: 0x%08x\n", 236 RD2(slot, SDHCI_BLOCK_SIZE), RD2(slot, SDHCI_BLOCK_COUNT)); 237 slot_sprintf(slot, s, "Argument: 0x%08x | Trn mode: 0x%08x\n", 238 RD4(slot, SDHCI_ARGUMENT), RD2(slot, SDHCI_TRANSFER_MODE)); 239 slot_sprintf(slot, s, "Present: 0x%08x | Host ctl: 0x%08x\n", 240 RD4(slot, SDHCI_PRESENT_STATE), RD1(slot, SDHCI_HOST_CONTROL)); 241 slot_sprintf(slot, s, "Power: 0x%08x | Blk gap: 0x%08x\n", 242 RD1(slot, SDHCI_POWER_CONTROL), RD1(slot, SDHCI_BLOCK_GAP_CONTROL)); 243 slot_sprintf(slot, s, "Wake-up: 0x%08x | Clock: 0x%08x\n", 244 RD1(slot, SDHCI_WAKE_UP_CONTROL), RD2(slot, SDHCI_CLOCK_CONTROL)); 245 slot_sprintf(slot, s, "Timeout: 0x%08x | Int stat: 0x%08x\n", 246 RD1(slot, SDHCI_TIMEOUT_CONTROL), RD4(slot, SDHCI_INT_STATUS)); 247 slot_sprintf(slot, s, "Int enab: 0x%08x | Sig enab: 0x%08x\n", 248 RD4(slot, SDHCI_INT_ENABLE), RD4(slot, SDHCI_SIGNAL_ENABLE)); 249 slot_sprintf(slot, s, "AC12 err: 0x%08x | Host ctl2:0x%08x\n", 250 RD2(slot, SDHCI_ACMD12_ERR), RD2(slot, SDHCI_HOST_CONTROL2)); 251 slot_sprintf(slot, s, "Caps: 0x%08x | Caps2: 0x%08x\n", 252 RD4(slot, SDHCI_CAPABILITIES), RD4(slot, SDHCI_CAPABILITIES2)); 253 slot_sprintf(slot, s, "Max curr: 0x%08x | ADMA err: 0x%08x\n", 254 RD4(slot, SDHCI_MAX_CURRENT), RD1(slot, SDHCI_ADMA_ERR)); 255 slot_sprintf(slot, s, "ADMA addr:0x%08x | Slot int: 0x%08x\n", 256 RD4(slot, SDHCI_ADMA_ADDRESS_LO), RD2(slot, SDHCI_SLOT_INT_STATUS)); 257 258 slot_sprintf(slot, s, "===========================================\n"); 259 } 260 261 static void 262 sdhci_dumpregs(struct sdhci_slot *slot) 263 { 264 struct sbuf s; 265 266 if (sbuf_new(&s, NULL, 1024, SBUF_NOWAIT | SBUF_AUTOEXTEND) == NULL) { 267 slot_printf(slot, "sdhci_dumpregs: Failed to allocate memory for sbuf\n"); 268 return; 269 } 270 271 sbuf_set_drain(&s, &sbuf_printf_drain, NULL); 272 sdhci_dumpregs_buf(slot, &s); 273 sbuf_finish(&s); 274 sbuf_delete(&s); 275 } 276 277 static int 278 sdhci_syctl_dumpregs(SYSCTL_HANDLER_ARGS) 279 { 280 struct sdhci_slot *slot = arg1; 281 struct sbuf s; 282 283 sbuf_new_for_sysctl(&s, NULL, 1024, req); 284 sbuf_putc(&s, '\n'); 285 sdhci_dumpregs_buf(slot, &s); 286 sbuf_finish(&s); 287 sbuf_delete(&s); 288 289 return (0); 290 } 291 292 static void 293 sdhci_dumpcaps_buf(struct sdhci_slot *slot, struct sbuf *s) 294 { 295 int host_caps = slot->host.caps; 296 int caps = slot->caps; 297 298 slot_sprintf(slot, s, 299 "%uMHz%s %s VDD:%s%s%s VCCQ: 3.3V%s%s DRV: B%s%s%s %s %s\n", 300 slot->max_clk / 1000000, 301 (caps & SDHCI_CAN_DO_HISPD) ? " HS" : "", 302 (host_caps & MMC_CAP_8_BIT_DATA) ? "8bits" : 303 ((host_caps & MMC_CAP_4_BIT_DATA) ? "4bits" : "1bit"), 304 (caps & SDHCI_CAN_VDD_330) ? " 3.3V" : "", 305 (caps & SDHCI_CAN_VDD_300) ? " 3.0V" : "", 306 ((caps & SDHCI_CAN_VDD_180) && 307 (slot->opt & SDHCI_SLOT_EMBEDDED)) ? " 1.8V" : "", 308 (host_caps & MMC_CAP_SIGNALING_180) ? " 1.8V" : "", 309 (host_caps & MMC_CAP_SIGNALING_120) ? " 1.2V" : "", 310 (host_caps & MMC_CAP_DRIVER_TYPE_A) ? "A" : "", 311 (host_caps & MMC_CAP_DRIVER_TYPE_C) ? "C" : "", 312 (host_caps & MMC_CAP_DRIVER_TYPE_D) ? "D" : "", 313 (slot->opt & SDHCI_HAVE_DMA) ? "DMA" : "PIO", 314 (slot->opt & SDHCI_SLOT_EMBEDDED) ? "embedded" : 315 (slot->opt & SDHCI_NON_REMOVABLE) ? "non-removable" : 316 "removable"); 317 if (host_caps & (MMC_CAP_MMC_DDR52 | MMC_CAP_MMC_HS200 | 318 MMC_CAP_MMC_HS400 | MMC_CAP_MMC_ENH_STROBE)) 319 slot_sprintf(slot, s, "eMMC:%s%s%s%s\n", 320 (host_caps & MMC_CAP_MMC_DDR52) ? " DDR52" : "", 321 (host_caps & MMC_CAP_MMC_HS200) ? " HS200" : "", 322 (host_caps & MMC_CAP_MMC_HS400) ? " HS400" : "", 323 ((host_caps & 324 (MMC_CAP_MMC_HS400 | MMC_CAP_MMC_ENH_STROBE)) == 325 (MMC_CAP_MMC_HS400 | MMC_CAP_MMC_ENH_STROBE)) ? 326 " HS400ES" : ""); 327 if (host_caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | 328 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104)) 329 slot_sprintf(slot, s, "UHS-I:%s%s%s%s%s\n", 330 (host_caps & MMC_CAP_UHS_SDR12) ? " SDR12" : "", 331 (host_caps & MMC_CAP_UHS_SDR25) ? " SDR25" : "", 332 (host_caps & MMC_CAP_UHS_SDR50) ? " SDR50" : "", 333 (host_caps & MMC_CAP_UHS_SDR104) ? " SDR104" : "", 334 (host_caps & MMC_CAP_UHS_DDR50) ? " DDR50" : ""); 335 if (slot->opt & SDHCI_TUNING_SUPPORTED) 336 slot_sprintf(slot, s, 337 "Re-tuning count %d secs, mode %d\n", 338 slot->retune_count, slot->retune_mode + 1); 339 } 340 341 static void 342 sdhci_dumpcaps(struct sdhci_slot *slot) 343 { 344 struct sbuf s; 345 346 if (sbuf_new(&s, NULL, 1024, SBUF_NOWAIT | SBUF_AUTOEXTEND) == NULL) { 347 slot_printf(slot, "sdhci_dumpcaps: Failed to allocate memory for sbuf\n"); 348 return; 349 } 350 351 sbuf_set_drain(&s, &sbuf_printf_drain, NULL); 352 sdhci_dumpcaps_buf(slot, &s); 353 sbuf_finish(&s); 354 sbuf_delete(&s); 355 } 356 357 static int 358 sdhci_syctl_dumpcaps(SYSCTL_HANDLER_ARGS) 359 { 360 struct sdhci_slot *slot = arg1; 361 struct sbuf s; 362 363 sbuf_new_for_sysctl(&s, NULL, 1024, req); 364 sbuf_putc(&s, '\n'); 365 sdhci_dumpcaps_buf(slot, &s); 366 sbuf_finish(&s); 367 sbuf_delete(&s); 368 369 return (0); 370 } 371 372 static uint32_t 373 sdhci_tuning_intmask(const struct sdhci_slot *slot) 374 { 375 uint32_t intmask; 376 377 intmask = 0; 378 if (slot->opt & SDHCI_TUNING_ENABLED) { 379 intmask |= SDHCI_INT_TUNEERR; 380 if (slot->retune_mode == SDHCI_RETUNE_MODE_2 || 381 slot->retune_mode == SDHCI_RETUNE_MODE_3) 382 intmask |= SDHCI_INT_RETUNE; 383 } 384 return (intmask); 385 } 386 387 static void 388 sdhci_init(struct sdhci_slot *slot) 389 { 390 391 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_ALL); 392 393 /* Enable interrupts. */ 394 slot->intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | 395 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | 396 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | 397 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | 398 SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE | 399 SDHCI_INT_ACMD12ERR; 400 401 if (!(slot->quirks & SDHCI_QUIRK_POLL_CARD_PRESENT) && 402 !(slot->opt & SDHCI_NON_REMOVABLE)) { 403 slot->intmask |= SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT; 404 } 405 406 WR4(slot, SDHCI_INT_ENABLE, slot->intmask); 407 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask); 408 } 409 410 static void 411 sdhci_set_clock(struct sdhci_slot *slot, uint32_t clock) 412 { 413 uint32_t clk_base; 414 uint32_t clk_sel; 415 uint32_t res; 416 uint16_t clk; 417 uint16_t div; 418 int timeout; 419 420 if (clock == slot->clock) 421 return; 422 clock = SDHCI_SET_CLOCK(slot->bus, slot, clock); 423 slot->clock = clock; 424 425 /* Turn off the clock. */ 426 clk = RD2(slot, SDHCI_CLOCK_CONTROL); 427 WR2(slot, SDHCI_CLOCK_CONTROL, clk & ~SDHCI_CLOCK_CARD_EN); 428 /* If no clock requested - leave it so. */ 429 if (clock == 0) 430 return; 431 432 /* Determine the clock base frequency */ 433 clk_base = slot->max_clk; 434 if (slot->quirks & SDHCI_QUIRK_BCM577XX_400KHZ_CLKSRC) { 435 clk_sel = RD2(slot, BCM577XX_HOST_CONTROL) & 436 BCM577XX_CTRL_CLKSEL_MASK; 437 438 /* 439 * Select clock source appropriate for the requested frequency. 440 */ 441 if ((clk_base / BCM577XX_DEFAULT_MAX_DIVIDER) > clock) { 442 clk_base = BCM577XX_ALT_CLOCK_BASE; 443 clk_sel |= (BCM577XX_CTRL_CLKSEL_64MHZ << 444 BCM577XX_CTRL_CLKSEL_SHIFT); 445 } else { 446 clk_sel |= (BCM577XX_CTRL_CLKSEL_DEFAULT << 447 BCM577XX_CTRL_CLKSEL_SHIFT); 448 } 449 450 WR2(slot, BCM577XX_HOST_CONTROL, clk_sel); 451 } 452 453 /* Recalculate timeout clock frequency based on the new sd clock. */ 454 if (slot->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) 455 slot->timeout_clk = slot->clock / 1000; 456 457 if (slot->version < SDHCI_SPEC_300) { 458 /* Looking for highest freq <= clock. */ 459 res = clk_base; 460 for (div = 1; div < SDHCI_200_MAX_DIVIDER; div <<= 1) { 461 if (res <= clock) 462 break; 463 res >>= 1; 464 } 465 /* Divider 1:1 is 0x00, 2:1 is 0x01, 256:1 is 0x80 ... */ 466 div >>= 1; 467 } else { 468 /* Version 3.0 divisors are multiples of two up to 1023 * 2 */ 469 if (clock >= clk_base) 470 div = 0; 471 else { 472 for (div = 2; div < SDHCI_300_MAX_DIVIDER; div += 2) { 473 if ((clk_base / div) <= clock) 474 break; 475 } 476 } 477 div >>= 1; 478 } 479 480 if (bootverbose || sdhci_debug) 481 slot_printf(slot, "Divider %d for freq %d (base %d)\n", 482 div, clock, clk_base); 483 484 /* Now we have got divider, set it. */ 485 clk = (div & SDHCI_DIVIDER_MASK) << SDHCI_DIVIDER_SHIFT; 486 clk |= ((div >> SDHCI_DIVIDER_MASK_LEN) & SDHCI_DIVIDER_HI_MASK) 487 << SDHCI_DIVIDER_HI_SHIFT; 488 489 WR2(slot, SDHCI_CLOCK_CONTROL, clk); 490 /* Enable clock. */ 491 clk |= SDHCI_CLOCK_INT_EN; 492 WR2(slot, SDHCI_CLOCK_CONTROL, clk); 493 /* Wait up to 10 ms until it stabilize. */ 494 timeout = 10; 495 while (!((clk = RD2(slot, SDHCI_CLOCK_CONTROL)) 496 & SDHCI_CLOCK_INT_STABLE)) { 497 if (timeout == 0) { 498 slot_printf(slot, 499 "Internal clock never stabilised.\n"); 500 sdhci_dumpregs(slot); 501 return; 502 } 503 timeout--; 504 DELAY(1000); 505 } 506 /* Pass clock signal to the bus. */ 507 clk |= SDHCI_CLOCK_CARD_EN; 508 WR2(slot, SDHCI_CLOCK_CONTROL, clk); 509 } 510 511 static void 512 sdhci_set_power(struct sdhci_slot *slot, u_char power) 513 { 514 int i; 515 uint8_t pwr; 516 517 if (slot->power == power) 518 return; 519 520 slot->power = power; 521 522 /* Turn off the power. */ 523 pwr = 0; 524 WR1(slot, SDHCI_POWER_CONTROL, pwr); 525 /* If power down requested - leave it so. */ 526 if (power == 0) 527 return; 528 /* Set voltage. */ 529 switch (1 << power) { 530 case MMC_OCR_LOW_VOLTAGE: 531 pwr |= SDHCI_POWER_180; 532 break; 533 case MMC_OCR_290_300: 534 case MMC_OCR_300_310: 535 pwr |= SDHCI_POWER_300; 536 break; 537 case MMC_OCR_320_330: 538 case MMC_OCR_330_340: 539 pwr |= SDHCI_POWER_330; 540 break; 541 } 542 WR1(slot, SDHCI_POWER_CONTROL, pwr); 543 /* 544 * Turn on VDD1 power. Note that at least some Intel controllers can 545 * fail to enable bus power on the first try after transiting from D3 546 * to D0, so we give them up to 2 ms. 547 */ 548 pwr |= SDHCI_POWER_ON; 549 for (i = 0; i < 20; i++) { 550 WR1(slot, SDHCI_POWER_CONTROL, pwr); 551 if (RD1(slot, SDHCI_POWER_CONTROL) & SDHCI_POWER_ON) 552 break; 553 DELAY(100); 554 } 555 if (!(RD1(slot, SDHCI_POWER_CONTROL) & SDHCI_POWER_ON)) 556 slot_printf(slot, "Bus power failed to enable\n"); 557 558 if (slot->quirks & SDHCI_QUIRK_INTEL_POWER_UP_RESET) { 559 WR1(slot, SDHCI_POWER_CONTROL, pwr | 0x10); 560 DELAY(10); 561 WR1(slot, SDHCI_POWER_CONTROL, pwr); 562 DELAY(300); 563 } 564 } 565 566 static void 567 sdhci_read_block_pio(struct sdhci_slot *slot) 568 { 569 uint32_t data; 570 char *buffer; 571 size_t left; 572 573 buffer = slot->curcmd->data->data; 574 buffer += slot->offset; 575 /* Transfer one block at a time. */ 576 #ifdef MMCCAM 577 if (slot->curcmd->data->flags & MMC_DATA_BLOCK_SIZE) 578 left = min(slot->curcmd->data->block_size, 579 slot->curcmd->data->len - slot->offset); 580 else 581 #endif 582 left = min(512, slot->curcmd->data->len - slot->offset); 583 slot->offset += left; 584 585 /* If we are too fast, broken controllers return zeroes. */ 586 if (slot->quirks & SDHCI_QUIRK_BROKEN_TIMINGS) 587 DELAY(10); 588 /* Handle unaligned and aligned buffer cases. */ 589 if ((intptr_t)buffer & 3) { 590 while (left > 3) { 591 data = RD4(slot, SDHCI_BUFFER); 592 buffer[0] = data; 593 buffer[1] = (data >> 8); 594 buffer[2] = (data >> 16); 595 buffer[3] = (data >> 24); 596 buffer += 4; 597 left -= 4; 598 } 599 } else { 600 RD_MULTI_4(slot, SDHCI_BUFFER, 601 (uint32_t *)buffer, left >> 2); 602 left &= 3; 603 } 604 /* Handle uneven size case. */ 605 if (left > 0) { 606 data = RD4(slot, SDHCI_BUFFER); 607 while (left > 0) { 608 *(buffer++) = data; 609 data >>= 8; 610 left--; 611 } 612 } 613 } 614 615 static void 616 sdhci_write_block_pio(struct sdhci_slot *slot) 617 { 618 uint32_t data = 0; 619 char *buffer; 620 size_t left; 621 622 buffer = slot->curcmd->data->data; 623 buffer += slot->offset; 624 /* Transfer one block at a time. */ 625 #ifdef MMCCAM 626 if (slot->curcmd->data->flags & MMC_DATA_BLOCK_SIZE) { 627 left = min(slot->curcmd->data->block_size, 628 slot->curcmd->data->len - slot->offset); 629 } else 630 #endif 631 left = min(512, slot->curcmd->data->len - slot->offset); 632 slot->offset += left; 633 634 /* Handle unaligned and aligned buffer cases. */ 635 if ((intptr_t)buffer & 3) { 636 while (left > 3) { 637 data = buffer[0] + 638 (buffer[1] << 8) + 639 (buffer[2] << 16) + 640 (buffer[3] << 24); 641 left -= 4; 642 buffer += 4; 643 WR4(slot, SDHCI_BUFFER, data); 644 } 645 } else { 646 WR_MULTI_4(slot, SDHCI_BUFFER, 647 (uint32_t *)buffer, left >> 2); 648 left &= 3; 649 } 650 /* Handle uneven size case. */ 651 if (left > 0) { 652 while (left > 0) { 653 data <<= 8; 654 data += *(buffer++); 655 left--; 656 } 657 WR4(slot, SDHCI_BUFFER, data); 658 } 659 } 660 661 static void 662 sdhci_transfer_pio(struct sdhci_slot *slot) 663 { 664 665 /* Read as many blocks as possible. */ 666 if (slot->curcmd->data->flags & MMC_DATA_READ) { 667 while (RD4(slot, SDHCI_PRESENT_STATE) & 668 SDHCI_DATA_AVAILABLE) { 669 sdhci_read_block_pio(slot); 670 if (slot->offset >= slot->curcmd->data->len) 671 break; 672 } 673 } else { 674 while (RD4(slot, SDHCI_PRESENT_STATE) & 675 SDHCI_SPACE_AVAILABLE) { 676 sdhci_write_block_pio(slot); 677 if (slot->offset >= slot->curcmd->data->len) 678 break; 679 } 680 } 681 } 682 683 static void 684 sdhci_card_task(void *arg, int pending __unused) 685 { 686 struct sdhci_slot *slot = arg; 687 #ifndef MMCCAM 688 device_t d; 689 #endif 690 691 SDHCI_LOCK(slot); 692 if (SDHCI_GET_CARD_PRESENT(slot->bus, slot)) { 693 #ifdef MMCCAM 694 if (slot->card_present == 0) { 695 #else 696 if (slot->dev == NULL) { 697 #endif 698 /* If card is present - attach mmc bus. */ 699 if (bootverbose || sdhci_debug) 700 slot_printf(slot, "Card inserted\n"); 701 #ifdef MMCCAM 702 slot->card_present = 1; 703 mmccam_start_discovery(slot->sim); 704 SDHCI_UNLOCK(slot); 705 #else 706 d = slot->dev = device_add_child(slot->bus, "mmc", -1); 707 SDHCI_UNLOCK(slot); 708 if (d) { 709 device_set_ivars(d, slot); 710 (void)device_probe_and_attach(d); 711 } 712 #endif 713 } else 714 SDHCI_UNLOCK(slot); 715 } else { 716 #ifdef MMCCAM 717 if (slot->card_present == 1) { 718 #else 719 if (slot->dev != NULL) { 720 d = slot->dev; 721 #endif 722 /* If no card present - detach mmc bus. */ 723 if (bootverbose || sdhci_debug) 724 slot_printf(slot, "Card removed\n"); 725 slot->dev = NULL; 726 #ifdef MMCCAM 727 slot->card_present = 0; 728 mmccam_start_discovery(slot->sim); 729 SDHCI_UNLOCK(slot); 730 #else 731 slot->intmask &= ~sdhci_tuning_intmask(slot); 732 WR4(slot, SDHCI_INT_ENABLE, slot->intmask); 733 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask); 734 slot->opt &= ~SDHCI_TUNING_ENABLED; 735 SDHCI_UNLOCK(slot); 736 callout_drain(&slot->retune_callout); 737 device_delete_child(slot->bus, d); 738 #endif 739 } else 740 SDHCI_UNLOCK(slot); 741 } 742 } 743 744 static void 745 sdhci_handle_card_present_locked(struct sdhci_slot *slot, bool is_present) 746 { 747 bool was_present; 748 749 /* 750 * If there was no card and now there is one, schedule the task to 751 * create the child device after a short delay. The delay is to 752 * debounce the card insert (sometimes the card detect pin stabilizes 753 * before the other pins have made good contact). 754 * 755 * If there was a card present and now it's gone, immediately schedule 756 * the task to delete the child device. No debouncing -- gone is gone, 757 * because once power is removed, a full card re-init is needed, and 758 * that happens by deleting and recreating the child device. 759 */ 760 #ifdef MMCCAM 761 was_present = slot->card_present; 762 #else 763 was_present = slot->dev != NULL; 764 #endif 765 if (!was_present && is_present) { 766 taskqueue_enqueue_timeout(taskqueue_swi_giant, 767 &slot->card_delayed_task, -SDHCI_INSERT_DELAY_TICKS); 768 } else if (was_present && !is_present) { 769 taskqueue_enqueue(taskqueue_swi_giant, &slot->card_task); 770 } 771 } 772 773 void 774 sdhci_handle_card_present(struct sdhci_slot *slot, bool is_present) 775 { 776 777 SDHCI_LOCK(slot); 778 sdhci_handle_card_present_locked(slot, is_present); 779 SDHCI_UNLOCK(slot); 780 } 781 782 static void 783 sdhci_card_poll(void *arg) 784 { 785 struct sdhci_slot *slot = arg; 786 787 sdhci_handle_card_present(slot, 788 SDHCI_GET_CARD_PRESENT(slot->bus, slot)); 789 callout_reset(&slot->card_poll_callout, SDHCI_CARD_PRESENT_TICKS, 790 sdhci_card_poll, slot); 791 } 792 793 static int 794 sdhci_dma_alloc(struct sdhci_slot *slot) 795 { 796 int err; 797 798 if (!(slot->quirks & SDHCI_QUIRK_BROKEN_SDMA_BOUNDARY)) { 799 if (maxphys <= 1024 * 4) 800 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_4K; 801 else if (maxphys <= 1024 * 8) 802 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_8K; 803 else if (maxphys <= 1024 * 16) 804 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_16K; 805 else if (maxphys <= 1024 * 32) 806 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_32K; 807 else if (maxphys <= 1024 * 64) 808 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_64K; 809 else if (maxphys <= 1024 * 128) 810 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_128K; 811 else if (maxphys <= 1024 * 256) 812 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_256K; 813 else 814 slot->sdma_boundary = SDHCI_BLKSZ_SDMA_BNDRY_512K; 815 } 816 slot->sdma_bbufsz = SDHCI_SDMA_BNDRY_TO_BBUFSZ(slot->sdma_boundary); 817 818 /* 819 * Allocate the DMA tag for an SDMA bounce buffer. 820 * Note that the SDHCI specification doesn't state any alignment 821 * constraint for the SDMA system address. However, controllers 822 * typically ignore the SDMA boundary bits in SDHCI_DMA_ADDRESS when 823 * forming the actual address of data, requiring the SDMA buffer to 824 * be aligned to the SDMA boundary. 825 */ 826 err = bus_dma_tag_create(bus_get_dma_tag(slot->bus), slot->sdma_bbufsz, 827 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 828 slot->sdma_bbufsz, 1, slot->sdma_bbufsz, BUS_DMA_ALLOCNOW, 829 NULL, NULL, &slot->dmatag); 830 if (err != 0) { 831 slot_printf(slot, "Can't create DMA tag for SDMA\n"); 832 return (err); 833 } 834 /* Allocate DMA memory for the SDMA bounce buffer. */ 835 err = bus_dmamem_alloc(slot->dmatag, (void **)&slot->dmamem, 836 BUS_DMA_NOWAIT, &slot->dmamap); 837 if (err != 0) { 838 slot_printf(slot, "Can't alloc DMA memory for SDMA\n"); 839 bus_dma_tag_destroy(slot->dmatag); 840 return (err); 841 } 842 /* Map the memory of the SDMA bounce buffer. */ 843 err = bus_dmamap_load(slot->dmatag, slot->dmamap, 844 (void *)slot->dmamem, slot->sdma_bbufsz, sdhci_getaddr, 845 &slot->paddr, 0); 846 if (err != 0 || slot->paddr == 0) { 847 slot_printf(slot, "Can't load DMA memory for SDMA\n"); 848 bus_dmamem_free(slot->dmatag, slot->dmamem, slot->dmamap); 849 bus_dma_tag_destroy(slot->dmatag); 850 if (err) 851 return (err); 852 else 853 return (EFAULT); 854 } 855 856 return (0); 857 } 858 859 static void 860 sdhci_dma_free(struct sdhci_slot *slot) 861 { 862 863 bus_dmamap_unload(slot->dmatag, slot->dmamap); 864 bus_dmamem_free(slot->dmatag, slot->dmamem, slot->dmamap); 865 bus_dma_tag_destroy(slot->dmatag); 866 } 867 868 int 869 sdhci_init_slot(device_t dev, struct sdhci_slot *slot, int num) 870 { 871 kobjop_desc_t kobj_desc; 872 kobj_method_t *kobj_method; 873 uint32_t caps, caps2, freq, host_caps; 874 int err; 875 char node_name[8]; 876 struct sysctl_oid *node_oid; 877 878 SDHCI_LOCK_INIT(slot); 879 880 slot->num = num; 881 slot->bus = dev; 882 883 slot->version = (RD2(slot, SDHCI_HOST_VERSION) 884 >> SDHCI_SPEC_VER_SHIFT) & SDHCI_SPEC_VER_MASK; 885 if (slot->quirks & SDHCI_QUIRK_MISSING_CAPS) { 886 caps = slot->caps; 887 caps2 = slot->caps2; 888 } else { 889 caps = RD4(slot, SDHCI_CAPABILITIES); 890 if (slot->version >= SDHCI_SPEC_300) 891 caps2 = RD4(slot, SDHCI_CAPABILITIES2); 892 else 893 caps2 = 0; 894 } 895 if (slot->version >= SDHCI_SPEC_300) { 896 if ((caps & SDHCI_SLOTTYPE_MASK) != SDHCI_SLOTTYPE_REMOVABLE && 897 (caps & SDHCI_SLOTTYPE_MASK) != SDHCI_SLOTTYPE_EMBEDDED) { 898 slot_printf(slot, 899 "Driver doesn't support shared bus slots\n"); 900 SDHCI_LOCK_DESTROY(slot); 901 return (ENXIO); 902 } else if ((caps & SDHCI_SLOTTYPE_MASK) == 903 SDHCI_SLOTTYPE_EMBEDDED) { 904 slot->opt |= SDHCI_SLOT_EMBEDDED | SDHCI_NON_REMOVABLE; 905 } 906 } 907 /* Calculate base clock frequency. */ 908 if (slot->version >= SDHCI_SPEC_300) 909 freq = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> 910 SDHCI_CLOCK_BASE_SHIFT; 911 else 912 freq = (caps & SDHCI_CLOCK_BASE_MASK) >> 913 SDHCI_CLOCK_BASE_SHIFT; 914 if (freq != 0) 915 slot->max_clk = freq * 1000000; 916 /* 917 * If the frequency wasn't in the capabilities and the hardware driver 918 * hasn't already set max_clk we're probably not going to work right 919 * with an assumption, so complain about it. 920 */ 921 if (slot->max_clk == 0) { 922 slot->max_clk = SDHCI_DEFAULT_MAX_FREQ * 1000000; 923 slot_printf(slot, "Hardware doesn't specify base clock " 924 "frequency, using %dMHz as default.\n", 925 SDHCI_DEFAULT_MAX_FREQ); 926 } 927 /* Calculate/set timeout clock frequency. */ 928 if (slot->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) { 929 slot->timeout_clk = slot->max_clk / 1000; 930 } else if (slot->quirks & SDHCI_QUIRK_DATA_TIMEOUT_1MHZ) { 931 slot->timeout_clk = 1000; 932 } else { 933 slot->timeout_clk = (caps & SDHCI_TIMEOUT_CLK_MASK) >> 934 SDHCI_TIMEOUT_CLK_SHIFT; 935 if (caps & SDHCI_TIMEOUT_CLK_UNIT) 936 slot->timeout_clk *= 1000; 937 } 938 /* 939 * If the frequency wasn't in the capabilities and the hardware driver 940 * hasn't already set timeout_clk we'll probably work okay using the 941 * max timeout, but still mention it. 942 */ 943 if (slot->timeout_clk == 0) { 944 slot_printf(slot, "Hardware doesn't specify timeout clock " 945 "frequency, setting BROKEN_TIMEOUT quirk.\n"); 946 slot->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; 947 } 948 949 slot->host.f_min = SDHCI_MIN_FREQ(slot->bus, slot); 950 slot->host.f_max = slot->max_clk; 951 slot->host.host_ocr = 0; 952 if (caps & SDHCI_CAN_VDD_330) 953 slot->host.host_ocr |= MMC_OCR_320_330 | MMC_OCR_330_340; 954 if (caps & SDHCI_CAN_VDD_300) 955 slot->host.host_ocr |= MMC_OCR_290_300 | MMC_OCR_300_310; 956 /* 957 * 1.8V VDD is not supposed to be used for removable cards. Hardware 958 * prior to v3.0 had no way to indicate embedded slots, but did 959 * sometimes support 1.8v for non-removable devices. 960 */ 961 if ((caps & SDHCI_CAN_VDD_180) && (slot->version < SDHCI_SPEC_300 || 962 (slot->opt & SDHCI_SLOT_EMBEDDED))) 963 slot->host.host_ocr |= MMC_OCR_LOW_VOLTAGE; 964 if (slot->host.host_ocr == 0) { 965 slot_printf(slot, "Hardware doesn't report any " 966 "support voltages.\n"); 967 } 968 969 host_caps = slot->host.caps; 970 host_caps |= MMC_CAP_4_BIT_DATA; 971 if (caps & SDHCI_CAN_DO_8BITBUS) 972 host_caps |= MMC_CAP_8_BIT_DATA; 973 if (caps & SDHCI_CAN_DO_HISPD) 974 host_caps |= MMC_CAP_HSPEED; 975 if (slot->quirks & SDHCI_QUIRK_BOOT_NOACC) 976 host_caps |= MMC_CAP_BOOT_NOACC; 977 if (slot->quirks & SDHCI_QUIRK_WAIT_WHILE_BUSY) 978 host_caps |= MMC_CAP_WAIT_WHILE_BUSY; 979 980 /* Determine supported UHS-I and eMMC modes. */ 981 if (caps2 & (SDHCI_CAN_SDR50 | SDHCI_CAN_SDR104 | SDHCI_CAN_DDR50)) 982 host_caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; 983 if (caps2 & SDHCI_CAN_SDR104) { 984 host_caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50; 985 if (!(slot->quirks & SDHCI_QUIRK_BROKEN_MMC_HS200)) 986 host_caps |= MMC_CAP_MMC_HS200; 987 } else if (caps2 & SDHCI_CAN_SDR50) 988 host_caps |= MMC_CAP_UHS_SDR50; 989 if (caps2 & SDHCI_CAN_DDR50 && 990 !(slot->quirks & SDHCI_QUIRK_BROKEN_UHS_DDR50)) 991 host_caps |= MMC_CAP_UHS_DDR50; 992 if (slot->quirks & SDHCI_QUIRK_MMC_DDR52) 993 host_caps |= MMC_CAP_MMC_DDR52; 994 if (slot->quirks & SDHCI_QUIRK_CAPS_BIT63_FOR_MMC_HS400 && 995 caps2 & SDHCI_CAN_MMC_HS400) 996 host_caps |= MMC_CAP_MMC_HS400; 997 if (slot->quirks & SDHCI_QUIRK_MMC_HS400_IF_CAN_SDR104 && 998 caps2 & SDHCI_CAN_SDR104) 999 host_caps |= MMC_CAP_MMC_HS400; 1000 1001 /* 1002 * Disable UHS-I and eMMC modes if the set_uhs_timing method is the 1003 * default NULL implementation. 1004 */ 1005 kobj_desc = &sdhci_set_uhs_timing_desc; 1006 kobj_method = kobj_lookup_method(((kobj_t)dev)->ops->cls, NULL, 1007 kobj_desc); 1008 if (kobj_method == &kobj_desc->deflt) 1009 host_caps &= ~(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | 1010 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_UHS_SDR104 | 1011 MMC_CAP_MMC_DDR52 | MMC_CAP_MMC_HS200 | MMC_CAP_MMC_HS400); 1012 1013 #define SDHCI_CAP_MODES_TUNING(caps2) \ 1014 (((caps2) & SDHCI_TUNE_SDR50 ? MMC_CAP_UHS_SDR50 : 0) | \ 1015 MMC_CAP_UHS_DDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_MMC_HS200 | \ 1016 MMC_CAP_MMC_HS400) 1017 1018 /* 1019 * Disable UHS-I and eMMC modes that require (re-)tuning if either 1020 * the tune or re-tune method is the default NULL implementation. 1021 */ 1022 kobj_desc = &mmcbr_tune_desc; 1023 kobj_method = kobj_lookup_method(((kobj_t)dev)->ops->cls, NULL, 1024 kobj_desc); 1025 if (kobj_method == &kobj_desc->deflt) 1026 goto no_tuning; 1027 kobj_desc = &mmcbr_retune_desc; 1028 kobj_method = kobj_lookup_method(((kobj_t)dev)->ops->cls, NULL, 1029 kobj_desc); 1030 if (kobj_method == &kobj_desc->deflt) { 1031 no_tuning: 1032 host_caps &= ~(SDHCI_CAP_MODES_TUNING(caps2)); 1033 } 1034 1035 /* Allocate tuning structures and determine tuning parameters. */ 1036 if (host_caps & SDHCI_CAP_MODES_TUNING(caps2)) { 1037 slot->opt |= SDHCI_TUNING_SUPPORTED; 1038 slot->tune_req = malloc(sizeof(*slot->tune_req), M_DEVBUF, 1039 M_WAITOK); 1040 slot->tune_cmd = malloc(sizeof(*slot->tune_cmd), M_DEVBUF, 1041 M_WAITOK); 1042 slot->tune_data = malloc(sizeof(*slot->tune_data), M_DEVBUF, 1043 M_WAITOK); 1044 if (caps2 & SDHCI_TUNE_SDR50) 1045 slot->opt |= SDHCI_SDR50_NEEDS_TUNING; 1046 slot->retune_mode = (caps2 & SDHCI_RETUNE_MODES_MASK) >> 1047 SDHCI_RETUNE_MODES_SHIFT; 1048 if (slot->retune_mode == SDHCI_RETUNE_MODE_1) { 1049 slot->retune_count = (caps2 & SDHCI_RETUNE_CNT_MASK) >> 1050 SDHCI_RETUNE_CNT_SHIFT; 1051 if (slot->retune_count > 0xb) { 1052 slot_printf(slot, "Unknown re-tuning count " 1053 "%x, using 1 sec\n", slot->retune_count); 1054 slot->retune_count = 1; 1055 } else if (slot->retune_count != 0) 1056 slot->retune_count = 1057 1 << (slot->retune_count - 1); 1058 } 1059 } 1060 1061 #undef SDHCI_CAP_MODES_TUNING 1062 1063 /* Determine supported VCCQ signaling levels. */ 1064 host_caps |= MMC_CAP_SIGNALING_330; 1065 if (host_caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | 1066 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_UHS_SDR104 | 1067 MMC_CAP_MMC_DDR52_180 | MMC_CAP_MMC_HS200_180 | 1068 MMC_CAP_MMC_HS400_180)) 1069 host_caps |= MMC_CAP_SIGNALING_120 | MMC_CAP_SIGNALING_180; 1070 1071 /* 1072 * Disable 1.2 V and 1.8 V signaling if the switch_vccq method is the 1073 * default NULL implementation. Disable 1.2 V support if it's the 1074 * generic SDHCI implementation. 1075 */ 1076 kobj_desc = &mmcbr_switch_vccq_desc; 1077 kobj_method = kobj_lookup_method(((kobj_t)dev)->ops->cls, NULL, 1078 kobj_desc); 1079 if (kobj_method == &kobj_desc->deflt) 1080 host_caps &= ~(MMC_CAP_SIGNALING_120 | MMC_CAP_SIGNALING_180); 1081 else if (kobj_method->func == (kobjop_t)sdhci_generic_switch_vccq) 1082 host_caps &= ~MMC_CAP_SIGNALING_120; 1083 1084 /* Determine supported driver types (type B is always mandatory). */ 1085 if (caps2 & SDHCI_CAN_DRIVE_TYPE_A) 1086 host_caps |= MMC_CAP_DRIVER_TYPE_A; 1087 if (caps2 & SDHCI_CAN_DRIVE_TYPE_C) 1088 host_caps |= MMC_CAP_DRIVER_TYPE_C; 1089 if (caps2 & SDHCI_CAN_DRIVE_TYPE_D) 1090 host_caps |= MMC_CAP_DRIVER_TYPE_D; 1091 slot->host.caps = host_caps; 1092 1093 /* Decide if we have usable DMA. */ 1094 if (caps & SDHCI_CAN_DO_DMA) 1095 slot->opt |= SDHCI_HAVE_DMA; 1096 1097 if (slot->quirks & SDHCI_QUIRK_BROKEN_DMA) 1098 slot->opt &= ~SDHCI_HAVE_DMA; 1099 if (slot->quirks & SDHCI_QUIRK_FORCE_DMA) 1100 slot->opt |= SDHCI_HAVE_DMA; 1101 if (slot->quirks & SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE) 1102 slot->opt |= SDHCI_NON_REMOVABLE; 1103 1104 /* 1105 * Use platform-provided transfer backend 1106 * with PIO as a fallback mechanism 1107 */ 1108 if (slot->opt & SDHCI_PLATFORM_TRANSFER) 1109 slot->opt &= ~SDHCI_HAVE_DMA; 1110 1111 if (slot->opt & SDHCI_HAVE_DMA) { 1112 err = sdhci_dma_alloc(slot); 1113 if (err != 0) { 1114 if (slot->opt & SDHCI_TUNING_SUPPORTED) { 1115 free(slot->tune_req, M_DEVBUF); 1116 free(slot->tune_cmd, M_DEVBUF); 1117 free(slot->tune_data, M_DEVBUF); 1118 } 1119 SDHCI_LOCK_DESTROY(slot); 1120 return (err); 1121 } 1122 } 1123 1124 if (bootverbose || sdhci_debug) { 1125 sdhci_dumpcaps(slot); 1126 sdhci_dumpregs(slot); 1127 } 1128 1129 slot->timeout = 10; 1130 SYSCTL_ADD_INT(device_get_sysctl_ctx(slot->bus), 1131 SYSCTL_CHILDREN(device_get_sysctl_tree(slot->bus)), OID_AUTO, 1132 "timeout", CTLFLAG_RWTUN, &slot->timeout, 0, 1133 "Maximum timeout for SDHCI transfers (in secs)"); 1134 TASK_INIT(&slot->card_task, 0, sdhci_card_task, slot); 1135 TIMEOUT_TASK_INIT(taskqueue_swi_giant, &slot->card_delayed_task, 0, 1136 sdhci_card_task, slot); 1137 callout_init(&slot->card_poll_callout, 1); 1138 callout_init_mtx(&slot->timeout_callout, &slot->mtx, 0); 1139 callout_init_mtx(&slot->retune_callout, &slot->mtx, 0); 1140 1141 if ((slot->quirks & SDHCI_QUIRK_POLL_CARD_PRESENT) && 1142 !(slot->opt & SDHCI_NON_REMOVABLE)) { 1143 callout_reset(&slot->card_poll_callout, 1144 SDHCI_CARD_PRESENT_TICKS, sdhci_card_poll, slot); 1145 } 1146 1147 sdhci_init(slot); 1148 1149 snprintf(node_name, sizeof(node_name), "slot%d", slot->num); 1150 1151 node_oid = SYSCTL_ADD_NODE(device_get_sysctl_ctx(dev), 1152 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 1153 OID_AUTO, node_name, CTLFLAG_RW, 0, "slot specific node"); 1154 1155 node_oid = SYSCTL_ADD_NODE(device_get_sysctl_ctx(dev), 1156 SYSCTL_CHILDREN(node_oid), OID_AUTO, "debug", CTLFLAG_RW, 0, 1157 "Debugging node"); 1158 1159 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), SYSCTL_CHILDREN(node_oid), 1160 OID_AUTO, "dumpregs", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, 1161 slot, 0, &sdhci_syctl_dumpregs, 1162 "A", "Dump SDHCI registers"); 1163 1164 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), SYSCTL_CHILDREN(node_oid), 1165 OID_AUTO, "dumpcaps", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, 1166 slot, 0, &sdhci_syctl_dumpcaps, 1167 "A", "Dump SDHCI capabilites"); 1168 1169 return (0); 1170 } 1171 1172 #ifndef MMCCAM 1173 void 1174 sdhci_start_slot(struct sdhci_slot *slot) 1175 { 1176 1177 sdhci_card_task(slot, 0); 1178 } 1179 #endif 1180 1181 int 1182 sdhci_cleanup_slot(struct sdhci_slot *slot) 1183 { 1184 device_t d; 1185 1186 callout_drain(&slot->timeout_callout); 1187 callout_drain(&slot->card_poll_callout); 1188 callout_drain(&slot->retune_callout); 1189 taskqueue_drain(taskqueue_swi_giant, &slot->card_task); 1190 taskqueue_drain_timeout(taskqueue_swi_giant, &slot->card_delayed_task); 1191 1192 SDHCI_LOCK(slot); 1193 d = slot->dev; 1194 slot->dev = NULL; 1195 SDHCI_UNLOCK(slot); 1196 if (d != NULL) 1197 device_delete_child(slot->bus, d); 1198 1199 SDHCI_LOCK(slot); 1200 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_ALL); 1201 SDHCI_UNLOCK(slot); 1202 if (slot->opt & SDHCI_HAVE_DMA) 1203 sdhci_dma_free(slot); 1204 if (slot->opt & SDHCI_TUNING_SUPPORTED) { 1205 free(slot->tune_req, M_DEVBUF); 1206 free(slot->tune_cmd, M_DEVBUF); 1207 free(slot->tune_data, M_DEVBUF); 1208 } 1209 1210 SDHCI_LOCK_DESTROY(slot); 1211 1212 return (0); 1213 } 1214 1215 int 1216 sdhci_generic_suspend(struct sdhci_slot *slot) 1217 { 1218 1219 /* 1220 * We expect the MMC layer to issue initial tuning after resume. 1221 * Otherwise, we'd need to indicate re-tuning including circuit reset 1222 * being required at least for re-tuning modes 1 and 2 ourselves. 1223 */ 1224 callout_drain(&slot->retune_callout); 1225 SDHCI_LOCK(slot); 1226 slot->opt &= ~SDHCI_TUNING_ENABLED; 1227 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_ALL); 1228 SDHCI_UNLOCK(slot); 1229 1230 return (0); 1231 } 1232 1233 int 1234 sdhci_generic_resume(struct sdhci_slot *slot) 1235 { 1236 1237 SDHCI_LOCK(slot); 1238 sdhci_init(slot); 1239 SDHCI_UNLOCK(slot); 1240 1241 return (0); 1242 } 1243 1244 void 1245 sdhci_generic_reset(device_t brdev __unused, struct sdhci_slot *slot, 1246 uint8_t mask) 1247 { 1248 int timeout; 1249 uint32_t clock; 1250 1251 if (slot->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { 1252 if (!SDHCI_GET_CARD_PRESENT(slot->bus, slot)) 1253 return; 1254 } 1255 1256 /* Some controllers need this kick or reset won't work. */ 1257 if ((mask & SDHCI_RESET_ALL) == 0 && 1258 (slot->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)) { 1259 /* This is to force an update */ 1260 clock = slot->clock; 1261 slot->clock = 0; 1262 sdhci_set_clock(slot, clock); 1263 } 1264 1265 if (mask & SDHCI_RESET_ALL) { 1266 slot->clock = 0; 1267 slot->power = 0; 1268 } 1269 1270 WR1(slot, SDHCI_SOFTWARE_RESET, mask); 1271 1272 if (slot->quirks & SDHCI_QUIRK_WAITFOR_RESET_ASSERTED) { 1273 /* 1274 * Resets on TI OMAPs and AM335x are incompatible with SDHCI 1275 * specification. The reset bit has internal propagation delay, 1276 * so a fast read after write returns 0 even if reset process is 1277 * in progress. The workaround is to poll for 1 before polling 1278 * for 0. In the worst case, if we miss seeing it asserted the 1279 * time we spent waiting is enough to ensure the reset finishes. 1280 */ 1281 timeout = 10000; 1282 while ((RD1(slot, SDHCI_SOFTWARE_RESET) & mask) != mask) { 1283 if (timeout <= 0) 1284 break; 1285 timeout--; 1286 DELAY(1); 1287 } 1288 } 1289 1290 /* Wait max 100 ms */ 1291 timeout = 10000; 1292 /* Controller clears the bits when it's done */ 1293 while (RD1(slot, SDHCI_SOFTWARE_RESET) & mask) { 1294 if (timeout <= 0) { 1295 slot_printf(slot, "Reset 0x%x never completed.\n", 1296 mask); 1297 sdhci_dumpregs(slot); 1298 return; 1299 } 1300 timeout--; 1301 DELAY(10); 1302 } 1303 } 1304 1305 uint32_t 1306 sdhci_generic_min_freq(device_t brdev __unused, struct sdhci_slot *slot) 1307 { 1308 1309 if (slot->version >= SDHCI_SPEC_300) 1310 return (slot->max_clk / SDHCI_300_MAX_DIVIDER); 1311 else 1312 return (slot->max_clk / SDHCI_200_MAX_DIVIDER); 1313 } 1314 1315 bool 1316 sdhci_generic_get_card_present(device_t brdev __unused, struct sdhci_slot *slot) 1317 { 1318 1319 if (slot->opt & SDHCI_NON_REMOVABLE) 1320 return true; 1321 1322 return (RD4(slot, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); 1323 } 1324 1325 void 1326 sdhci_generic_set_uhs_timing(device_t brdev __unused, struct sdhci_slot *slot) 1327 { 1328 const struct mmc_ios *ios; 1329 uint16_t hostctrl2; 1330 1331 if (slot->version < SDHCI_SPEC_300) 1332 return; 1333 1334 SDHCI_ASSERT_LOCKED(slot); 1335 ios = &slot->host.ios; 1336 sdhci_set_clock(slot, 0); 1337 hostctrl2 = RD2(slot, SDHCI_HOST_CONTROL2); 1338 hostctrl2 &= ~SDHCI_CTRL2_UHS_MASK; 1339 if (ios->clock > SD_SDR50_MAX) { 1340 if (ios->timing == bus_timing_mmc_hs400 || 1341 ios->timing == bus_timing_mmc_hs400es) 1342 hostctrl2 |= SDHCI_CTRL2_MMC_HS400; 1343 else 1344 hostctrl2 |= SDHCI_CTRL2_UHS_SDR104; 1345 } 1346 else if (ios->clock > SD_SDR25_MAX) 1347 hostctrl2 |= SDHCI_CTRL2_UHS_SDR50; 1348 else if (ios->clock > SD_SDR12_MAX) { 1349 if (ios->timing == bus_timing_uhs_ddr50 || 1350 ios->timing == bus_timing_mmc_ddr52) 1351 hostctrl2 |= SDHCI_CTRL2_UHS_DDR50; 1352 else 1353 hostctrl2 |= SDHCI_CTRL2_UHS_SDR25; 1354 } else if (ios->clock > SD_MMC_CARD_ID_FREQUENCY) 1355 hostctrl2 |= SDHCI_CTRL2_UHS_SDR12; 1356 WR2(slot, SDHCI_HOST_CONTROL2, hostctrl2); 1357 sdhci_set_clock(slot, ios->clock); 1358 } 1359 1360 int 1361 sdhci_generic_update_ios(device_t brdev, device_t reqdev) 1362 { 1363 struct sdhci_slot *slot = device_get_ivars(reqdev); 1364 struct mmc_ios *ios = &slot->host.ios; 1365 1366 SDHCI_LOCK(slot); 1367 /* Do full reset on bus power down to clear from any state. */ 1368 if (ios->power_mode == power_off) { 1369 WR4(slot, SDHCI_SIGNAL_ENABLE, 0); 1370 sdhci_init(slot); 1371 } 1372 /* Configure the bus. */ 1373 sdhci_set_clock(slot, ios->clock); 1374 sdhci_set_power(slot, (ios->power_mode == power_off) ? 0 : ios->vdd); 1375 if (ios->bus_width == bus_width_8) { 1376 slot->hostctrl |= SDHCI_CTRL_8BITBUS; 1377 slot->hostctrl &= ~SDHCI_CTRL_4BITBUS; 1378 } else if (ios->bus_width == bus_width_4) { 1379 slot->hostctrl &= ~SDHCI_CTRL_8BITBUS; 1380 slot->hostctrl |= SDHCI_CTRL_4BITBUS; 1381 } else if (ios->bus_width == bus_width_1) { 1382 slot->hostctrl &= ~SDHCI_CTRL_8BITBUS; 1383 slot->hostctrl &= ~SDHCI_CTRL_4BITBUS; 1384 } else { 1385 panic("Invalid bus width: %d", ios->bus_width); 1386 } 1387 if (ios->clock > SD_SDR12_MAX && 1388 !(slot->quirks & SDHCI_QUIRK_DONT_SET_HISPD_BIT)) 1389 slot->hostctrl |= SDHCI_CTRL_HISPD; 1390 else 1391 slot->hostctrl &= ~SDHCI_CTRL_HISPD; 1392 WR1(slot, SDHCI_HOST_CONTROL, slot->hostctrl); 1393 SDHCI_SET_UHS_TIMING(brdev, slot); 1394 /* Some controllers like reset after bus changes. */ 1395 if (slot->quirks & SDHCI_QUIRK_RESET_ON_IOS) 1396 SDHCI_RESET(slot->bus, slot, 1397 SDHCI_RESET_CMD | SDHCI_RESET_DATA); 1398 1399 SDHCI_UNLOCK(slot); 1400 return (0); 1401 } 1402 1403 int 1404 sdhci_generic_switch_vccq(device_t brdev __unused, device_t reqdev) 1405 { 1406 struct sdhci_slot *slot = device_get_ivars(reqdev); 1407 enum mmc_vccq vccq; 1408 int err; 1409 uint16_t hostctrl2; 1410 1411 if (slot->version < SDHCI_SPEC_300) 1412 return (0); 1413 1414 err = 0; 1415 vccq = slot->host.ios.vccq; 1416 SDHCI_LOCK(slot); 1417 sdhci_set_clock(slot, 0); 1418 hostctrl2 = RD2(slot, SDHCI_HOST_CONTROL2); 1419 switch (vccq) { 1420 case vccq_330: 1421 if (!(hostctrl2 & SDHCI_CTRL2_S18_ENABLE)) 1422 goto done; 1423 hostctrl2 &= ~SDHCI_CTRL2_S18_ENABLE; 1424 WR2(slot, SDHCI_HOST_CONTROL2, hostctrl2); 1425 DELAY(5000); 1426 hostctrl2 = RD2(slot, SDHCI_HOST_CONTROL2); 1427 if (!(hostctrl2 & SDHCI_CTRL2_S18_ENABLE)) 1428 goto done; 1429 err = EAGAIN; 1430 break; 1431 case vccq_180: 1432 if (!(slot->host.caps & MMC_CAP_SIGNALING_180)) { 1433 err = EINVAL; 1434 goto done; 1435 } 1436 if (hostctrl2 & SDHCI_CTRL2_S18_ENABLE) 1437 goto done; 1438 hostctrl2 |= SDHCI_CTRL2_S18_ENABLE; 1439 WR2(slot, SDHCI_HOST_CONTROL2, hostctrl2); 1440 DELAY(5000); 1441 hostctrl2 = RD2(slot, SDHCI_HOST_CONTROL2); 1442 if (hostctrl2 & SDHCI_CTRL2_S18_ENABLE) 1443 goto done; 1444 err = EAGAIN; 1445 break; 1446 default: 1447 slot_printf(slot, 1448 "Attempt to set unsupported signaling voltage\n"); 1449 err = EINVAL; 1450 break; 1451 } 1452 done: 1453 sdhci_set_clock(slot, slot->host.ios.clock); 1454 SDHCI_UNLOCK(slot); 1455 return (err); 1456 } 1457 1458 int 1459 sdhci_generic_tune(device_t brdev __unused, device_t reqdev, bool hs400) 1460 { 1461 struct sdhci_slot *slot = device_get_ivars(reqdev); 1462 const struct mmc_ios *ios = &slot->host.ios; 1463 struct mmc_command *tune_cmd; 1464 struct mmc_data *tune_data; 1465 uint32_t opcode; 1466 int err; 1467 1468 if (!(slot->opt & SDHCI_TUNING_SUPPORTED)) 1469 return (0); 1470 1471 slot->retune_ticks = slot->retune_count * hz; 1472 opcode = MMC_SEND_TUNING_BLOCK; 1473 SDHCI_LOCK(slot); 1474 switch (ios->timing) { 1475 case bus_timing_mmc_hs400: 1476 slot_printf(slot, "HS400 must be tuned in HS200 mode\n"); 1477 SDHCI_UNLOCK(slot); 1478 return (EINVAL); 1479 case bus_timing_mmc_hs200: 1480 /* 1481 * In HS400 mode, controllers use the data strobe line to 1482 * latch data from the devices so periodic re-tuning isn't 1483 * expected to be required. 1484 */ 1485 if (hs400) 1486 slot->retune_ticks = 0; 1487 opcode = MMC_SEND_TUNING_BLOCK_HS200; 1488 break; 1489 case bus_timing_uhs_ddr50: 1490 case bus_timing_uhs_sdr104: 1491 break; 1492 case bus_timing_uhs_sdr50: 1493 if (slot->opt & SDHCI_SDR50_NEEDS_TUNING) 1494 break; 1495 SDHCI_UNLOCK(slot); 1496 return (0); 1497 default: 1498 slot_printf(slot, "Tuning requested but not required.\n"); 1499 SDHCI_UNLOCK(slot); 1500 return (EINVAL); 1501 } 1502 1503 tune_cmd = slot->tune_cmd; 1504 memset(tune_cmd, 0, sizeof(*tune_cmd)); 1505 tune_cmd->opcode = opcode; 1506 tune_cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; 1507 tune_data = tune_cmd->data = slot->tune_data; 1508 memset(tune_data, 0, sizeof(*tune_data)); 1509 tune_data->len = (opcode == MMC_SEND_TUNING_BLOCK_HS200 && 1510 ios->bus_width == bus_width_8) ? MMC_TUNING_LEN_HS200 : 1511 MMC_TUNING_LEN; 1512 tune_data->flags = MMC_DATA_READ; 1513 tune_data->mrq = tune_cmd->mrq = slot->tune_req; 1514 1515 slot->opt &= ~SDHCI_TUNING_ENABLED; 1516 err = sdhci_exec_tuning(slot, true); 1517 if (err == 0) { 1518 slot->opt |= SDHCI_TUNING_ENABLED; 1519 slot->intmask |= sdhci_tuning_intmask(slot); 1520 WR4(slot, SDHCI_INT_ENABLE, slot->intmask); 1521 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask); 1522 if (slot->retune_ticks) { 1523 callout_reset(&slot->retune_callout, slot->retune_ticks, 1524 sdhci_retune, slot); 1525 } 1526 } 1527 SDHCI_UNLOCK(slot); 1528 return (err); 1529 } 1530 1531 int 1532 sdhci_generic_retune(device_t brdev __unused, device_t reqdev, bool reset) 1533 { 1534 struct sdhci_slot *slot = device_get_ivars(reqdev); 1535 int err; 1536 1537 if (!(slot->opt & SDHCI_TUNING_ENABLED)) 1538 return (0); 1539 1540 /* HS400 must be tuned in HS200 mode. */ 1541 if (slot->host.ios.timing == bus_timing_mmc_hs400) 1542 return (EINVAL); 1543 1544 SDHCI_LOCK(slot); 1545 err = sdhci_exec_tuning(slot, reset); 1546 /* 1547 * There are two ways sdhci_exec_tuning() can fail: 1548 * EBUSY should not actually happen when requests are only issued 1549 * with the host properly acquired, and 1550 * EIO re-tuning failed (but it did work initially). 1551 * 1552 * In both cases, we should retry at later point if periodic re-tuning 1553 * is enabled. Note that due to slot->retune_req not being cleared in 1554 * these failure cases, the MMC layer should trigger another attempt at 1555 * re-tuning with the next request anyway, though. 1556 */ 1557 if (slot->retune_ticks) { 1558 callout_reset(&slot->retune_callout, slot->retune_ticks, 1559 sdhci_retune, slot); 1560 } 1561 SDHCI_UNLOCK(slot); 1562 return (err); 1563 } 1564 1565 static int 1566 sdhci_exec_tuning(struct sdhci_slot *slot, bool reset) 1567 { 1568 struct mmc_request *tune_req; 1569 struct mmc_command *tune_cmd; 1570 int i; 1571 uint32_t intmask; 1572 uint16_t hostctrl2; 1573 u_char opt; 1574 1575 SDHCI_ASSERT_LOCKED(slot); 1576 if (slot->req != NULL) 1577 return (EBUSY); 1578 1579 /* Tuning doesn't work with DMA enabled. */ 1580 opt = slot->opt; 1581 slot->opt = opt & ~SDHCI_HAVE_DMA; 1582 1583 /* 1584 * Ensure that as documented, SDHCI_INT_DATA_AVAIL is the only 1585 * kind of interrupt we receive in response to a tuning request. 1586 */ 1587 intmask = slot->intmask; 1588 slot->intmask = SDHCI_INT_DATA_AVAIL; 1589 WR4(slot, SDHCI_INT_ENABLE, SDHCI_INT_DATA_AVAIL); 1590 WR4(slot, SDHCI_SIGNAL_ENABLE, SDHCI_INT_DATA_AVAIL); 1591 1592 hostctrl2 = RD2(slot, SDHCI_HOST_CONTROL2); 1593 if (reset) 1594 hostctrl2 &= ~SDHCI_CTRL2_SAMPLING_CLOCK; 1595 else 1596 hostctrl2 |= SDHCI_CTRL2_SAMPLING_CLOCK; 1597 WR2(slot, SDHCI_HOST_CONTROL2, hostctrl2 | SDHCI_CTRL2_EXEC_TUNING); 1598 1599 tune_req = slot->tune_req; 1600 tune_cmd = slot->tune_cmd; 1601 for (i = 0; i < MMC_TUNING_MAX; i++) { 1602 memset(tune_req, 0, sizeof(*tune_req)); 1603 tune_req->cmd = tune_cmd; 1604 tune_req->done = sdhci_req_wakeup; 1605 tune_req->done_data = slot; 1606 slot->req = tune_req; 1607 slot->flags = 0; 1608 sdhci_start(slot); 1609 while (!(tune_req->flags & MMC_REQ_DONE)) 1610 msleep(tune_req, &slot->mtx, 0, "sdhciet", 0); 1611 if (!(tune_req->flags & MMC_TUNE_DONE)) 1612 break; 1613 hostctrl2 = RD2(slot, SDHCI_HOST_CONTROL2); 1614 if (!(hostctrl2 & SDHCI_CTRL2_EXEC_TUNING)) 1615 break; 1616 if (tune_cmd->opcode == MMC_SEND_TUNING_BLOCK) 1617 DELAY(1000); 1618 } 1619 1620 /* 1621 * Restore DMA usage and interrupts. 1622 * Note that the interrupt aggregation code might have cleared 1623 * SDHCI_INT_DMA_END and/or SDHCI_INT_RESPONSE in slot->intmask 1624 * and SDHCI_SIGNAL_ENABLE respectively so ensure SDHCI_INT_ENABLE 1625 * doesn't lose these. 1626 */ 1627 slot->opt = opt; 1628 slot->intmask = intmask; 1629 WR4(slot, SDHCI_INT_ENABLE, intmask | SDHCI_INT_DMA_END | 1630 SDHCI_INT_RESPONSE); 1631 WR4(slot, SDHCI_SIGNAL_ENABLE, intmask); 1632 1633 if ((hostctrl2 & (SDHCI_CTRL2_EXEC_TUNING | 1634 SDHCI_CTRL2_SAMPLING_CLOCK)) == SDHCI_CTRL2_SAMPLING_CLOCK) { 1635 slot->retune_req = 0; 1636 return (0); 1637 } 1638 1639 slot_printf(slot, "Tuning failed, using fixed sampling clock\n"); 1640 WR2(slot, SDHCI_HOST_CONTROL2, hostctrl2 & ~(SDHCI_CTRL2_EXEC_TUNING | 1641 SDHCI_CTRL2_SAMPLING_CLOCK)); 1642 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_CMD | SDHCI_RESET_DATA); 1643 return (EIO); 1644 } 1645 1646 static void 1647 sdhci_retune(void *arg) 1648 { 1649 struct sdhci_slot *slot = arg; 1650 1651 slot->retune_req |= SDHCI_RETUNE_REQ_NEEDED; 1652 } 1653 1654 #ifdef MMCCAM 1655 static void 1656 sdhci_req_done(struct sdhci_slot *slot) 1657 { 1658 union ccb *ccb; 1659 1660 if (__predict_false(sdhci_debug > 1)) 1661 slot_printf(slot, "%s\n", __func__); 1662 if (slot->ccb != NULL && slot->curcmd != NULL) { 1663 callout_stop(&slot->timeout_callout); 1664 ccb = slot->ccb; 1665 slot->ccb = NULL; 1666 slot->curcmd = NULL; 1667 1668 /* Tell CAM the request is finished */ 1669 struct ccb_mmcio *mmcio; 1670 mmcio = &ccb->mmcio; 1671 1672 ccb->ccb_h.status = 1673 (mmcio->cmd.error == 0 ? CAM_REQ_CMP : CAM_REQ_CMP_ERR); 1674 xpt_done(ccb); 1675 } 1676 } 1677 #else 1678 static void 1679 sdhci_req_done(struct sdhci_slot *slot) 1680 { 1681 struct mmc_request *req; 1682 1683 if (slot->req != NULL && slot->curcmd != NULL) { 1684 callout_stop(&slot->timeout_callout); 1685 req = slot->req; 1686 slot->req = NULL; 1687 slot->curcmd = NULL; 1688 req->done(req); 1689 } 1690 } 1691 #endif 1692 1693 static void 1694 sdhci_req_wakeup(struct mmc_request *req) 1695 { 1696 1697 req->flags |= MMC_REQ_DONE; 1698 wakeup(req); 1699 } 1700 1701 static void 1702 sdhci_timeout(void *arg) 1703 { 1704 struct sdhci_slot *slot = arg; 1705 1706 if (slot->curcmd != NULL) { 1707 slot_printf(slot, "Controller timeout\n"); 1708 sdhci_dumpregs(slot); 1709 SDHCI_RESET(slot->bus, slot, 1710 SDHCI_RESET_CMD | SDHCI_RESET_DATA); 1711 slot->curcmd->error = MMC_ERR_TIMEOUT; 1712 sdhci_req_done(slot); 1713 } else { 1714 slot_printf(slot, "Spurious timeout - no active command\n"); 1715 } 1716 } 1717 1718 static void 1719 sdhci_set_transfer_mode(struct sdhci_slot *slot, const struct mmc_data *data) 1720 { 1721 uint16_t mode; 1722 1723 if (data == NULL) 1724 return; 1725 1726 mode = SDHCI_TRNS_BLK_CNT_EN; 1727 if (data->len > 512 || data->block_count > 1) { 1728 mode |= SDHCI_TRNS_MULTI; 1729 if (data->block_count == 0 && __predict_true( 1730 #ifdef MMCCAM 1731 slot->ccb->mmcio.stop.opcode == MMC_STOP_TRANSMISSION && 1732 #else 1733 slot->req->stop != NULL && 1734 #endif 1735 !(slot->quirks & SDHCI_QUIRK_BROKEN_AUTO_STOP))) 1736 mode |= SDHCI_TRNS_ACMD12; 1737 } 1738 if (data->flags & MMC_DATA_READ) 1739 mode |= SDHCI_TRNS_READ; 1740 if (slot->flags & SDHCI_USE_DMA) 1741 mode |= SDHCI_TRNS_DMA; 1742 1743 WR2(slot, SDHCI_TRANSFER_MODE, mode); 1744 } 1745 1746 static void 1747 sdhci_start_command(struct sdhci_slot *slot, struct mmc_command *cmd) 1748 { 1749 int flags, timeout; 1750 uint32_t mask; 1751 1752 slot->curcmd = cmd; 1753 slot->cmd_done = 0; 1754 1755 cmd->error = MMC_ERR_NONE; 1756 1757 /* This flags combination is not supported by controller. */ 1758 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { 1759 slot_printf(slot, "Unsupported response type!\n"); 1760 cmd->error = MMC_ERR_FAILED; 1761 sdhci_req_done(slot); 1762 return; 1763 } 1764 1765 /* 1766 * Do not issue command if there is no card, clock or power. 1767 * Controller will not detect timeout without clock active. 1768 */ 1769 if (!SDHCI_GET_CARD_PRESENT(slot->bus, slot) || 1770 slot->power == 0 || 1771 slot->clock == 0) { 1772 slot_printf(slot, 1773 "Cannot issue a command (power=%d clock=%d)\n", 1774 slot->power, slot->clock); 1775 cmd->error = MMC_ERR_FAILED; 1776 sdhci_req_done(slot); 1777 return; 1778 } 1779 /* Always wait for free CMD bus. */ 1780 mask = SDHCI_CMD_INHIBIT; 1781 /* Wait for free DAT if we have data or busy signal. */ 1782 if (cmd->data != NULL || (cmd->flags & MMC_RSP_BUSY)) 1783 mask |= SDHCI_DAT_INHIBIT; 1784 /* 1785 * We shouldn't wait for DAT for stop commands or CMD19/CMD21. Note 1786 * that these latter are also special in that SDHCI_CMD_DATA should 1787 * be set below but no actual data is ever read from the controller. 1788 */ 1789 #ifdef MMCCAM 1790 if (cmd == &slot->ccb->mmcio.stop || 1791 #else 1792 if (cmd == slot->req->stop || 1793 #endif 1794 __predict_false(cmd->opcode == MMC_SEND_TUNING_BLOCK || 1795 cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) 1796 mask &= ~SDHCI_DAT_INHIBIT; 1797 /* 1798 * Wait for bus no more then 250 ms. Typically there will be no wait 1799 * here at all, but when writing a crash dump we may be bypassing the 1800 * host platform's interrupt handler, and in some cases that handler 1801 * may be working around hardware quirks such as not respecting r1b 1802 * busy indications. In those cases, this wait-loop serves the purpose 1803 * of waiting for the prior command and data transfers to be done, and 1804 * SD cards are allowed to take up to 250ms for write and erase ops. 1805 * (It's usually more like 20-30ms in the real world.) 1806 */ 1807 timeout = 250; 1808 while (mask & RD4(slot, SDHCI_PRESENT_STATE)) { 1809 if (timeout == 0) { 1810 slot_printf(slot, "Controller never released " 1811 "inhibit bit(s).\n"); 1812 sdhci_dumpregs(slot); 1813 cmd->error = MMC_ERR_FAILED; 1814 sdhci_req_done(slot); 1815 return; 1816 } 1817 timeout--; 1818 DELAY(1000); 1819 } 1820 1821 /* Prepare command flags. */ 1822 if (!(cmd->flags & MMC_RSP_PRESENT)) 1823 flags = SDHCI_CMD_RESP_NONE; 1824 else if (cmd->flags & MMC_RSP_136) 1825 flags = SDHCI_CMD_RESP_LONG; 1826 else if (cmd->flags & MMC_RSP_BUSY) 1827 flags = SDHCI_CMD_RESP_SHORT_BUSY; 1828 else 1829 flags = SDHCI_CMD_RESP_SHORT; 1830 if (cmd->flags & MMC_RSP_CRC) 1831 flags |= SDHCI_CMD_CRC; 1832 if (cmd->flags & MMC_RSP_OPCODE) 1833 flags |= SDHCI_CMD_INDEX; 1834 if (cmd->data != NULL) 1835 flags |= SDHCI_CMD_DATA; 1836 if (cmd->opcode == MMC_STOP_TRANSMISSION) 1837 flags |= SDHCI_CMD_TYPE_ABORT; 1838 /* Prepare data. */ 1839 sdhci_start_data(slot, cmd->data); 1840 /* 1841 * Interrupt aggregation: To reduce total number of interrupts 1842 * group response interrupt with data interrupt when possible. 1843 * If there going to be data interrupt, mask response one. 1844 */ 1845 if (slot->data_done == 0) { 1846 WR4(slot, SDHCI_SIGNAL_ENABLE, 1847 slot->intmask &= ~SDHCI_INT_RESPONSE); 1848 } 1849 /* Set command argument. */ 1850 WR4(slot, SDHCI_ARGUMENT, cmd->arg); 1851 /* Set data transfer mode. */ 1852 sdhci_set_transfer_mode(slot, cmd->data); 1853 if (__predict_false(sdhci_debug > 1)) 1854 slot_printf(slot, "Starting command opcode %#04x flags %#04x\n", 1855 cmd->opcode, flags); 1856 1857 /* Start command. */ 1858 WR2(slot, SDHCI_COMMAND_FLAGS, (cmd->opcode << 8) | (flags & 0xff)); 1859 /* Start timeout callout. */ 1860 callout_reset(&slot->timeout_callout, slot->timeout * hz, 1861 sdhci_timeout, slot); 1862 } 1863 1864 static void 1865 sdhci_finish_command(struct sdhci_slot *slot) 1866 { 1867 int i; 1868 uint32_t val; 1869 uint8_t extra; 1870 1871 if (__predict_false(sdhci_debug > 1)) 1872 slot_printf(slot, "%s: called, err %d flags %#04x\n", 1873 __func__, slot->curcmd->error, slot->curcmd->flags); 1874 slot->cmd_done = 1; 1875 /* 1876 * Interrupt aggregation: Restore command interrupt. 1877 * Main restore point for the case when command interrupt 1878 * happened first. 1879 */ 1880 if (__predict_true(slot->curcmd->opcode != MMC_SEND_TUNING_BLOCK && 1881 slot->curcmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)) 1882 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask |= 1883 SDHCI_INT_RESPONSE); 1884 /* In case of error - reset host and return. */ 1885 if (slot->curcmd->error) { 1886 if (slot->curcmd->error == MMC_ERR_BADCRC) 1887 slot->retune_req |= SDHCI_RETUNE_REQ_RESET; 1888 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_CMD); 1889 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_DATA); 1890 sdhci_start(slot); 1891 return; 1892 } 1893 /* If command has response - fetch it. */ 1894 if (slot->curcmd->flags & MMC_RSP_PRESENT) { 1895 if (slot->curcmd->flags & MMC_RSP_136) { 1896 /* CRC is stripped so we need one byte shift. */ 1897 extra = 0; 1898 for (i = 0; i < 4; i++) { 1899 val = RD4(slot, SDHCI_RESPONSE + i * 4); 1900 if (slot->quirks & 1901 SDHCI_QUIRK_DONT_SHIFT_RESPONSE) 1902 slot->curcmd->resp[3 - i] = val; 1903 else { 1904 slot->curcmd->resp[3 - i] = 1905 (val << 8) | extra; 1906 extra = val >> 24; 1907 } 1908 } 1909 } else 1910 slot->curcmd->resp[0] = RD4(slot, SDHCI_RESPONSE); 1911 } 1912 if (__predict_false(sdhci_debug > 1)) 1913 slot_printf(slot, "Resp: %#04x %#04x %#04x %#04x\n", 1914 slot->curcmd->resp[0], slot->curcmd->resp[1], 1915 slot->curcmd->resp[2], slot->curcmd->resp[3]); 1916 1917 /* If data ready - finish. */ 1918 if (slot->data_done) 1919 sdhci_start(slot); 1920 } 1921 1922 static void 1923 sdhci_start_data(struct sdhci_slot *slot, const struct mmc_data *data) 1924 { 1925 uint32_t blkcnt, blksz, current_timeout, sdma_bbufsz, target_timeout; 1926 uint8_t div; 1927 1928 if (data == NULL && (slot->curcmd->flags & MMC_RSP_BUSY) == 0) { 1929 slot->data_done = 1; 1930 return; 1931 } 1932 1933 slot->data_done = 0; 1934 1935 /* Calculate and set data timeout.*/ 1936 /* XXX: We should have this from mmc layer, now assume 1 sec. */ 1937 if (slot->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) { 1938 div = 0xE; 1939 } else { 1940 target_timeout = 1000000; 1941 div = 0; 1942 current_timeout = (1 << 13) * 1000 / slot->timeout_clk; 1943 while (current_timeout < target_timeout && div < 0xE) { 1944 ++div; 1945 current_timeout <<= 1; 1946 } 1947 /* Compensate for an off-by-one error in the CaFe chip.*/ 1948 if (div < 0xE && 1949 (slot->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) { 1950 ++div; 1951 } 1952 } 1953 WR1(slot, SDHCI_TIMEOUT_CONTROL, div); 1954 1955 if (data == NULL) 1956 return; 1957 1958 /* Use DMA if possible. */ 1959 if ((slot->opt & SDHCI_HAVE_DMA)) 1960 slot->flags |= SDHCI_USE_DMA; 1961 /* If data is small, broken DMA may return zeroes instead of data. */ 1962 if ((slot->quirks & SDHCI_QUIRK_BROKEN_TIMINGS) && 1963 (data->len <= 512)) 1964 slot->flags &= ~SDHCI_USE_DMA; 1965 /* Some controllers require even block sizes. */ 1966 if ((slot->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && 1967 ((data->len) & 0x3)) 1968 slot->flags &= ~SDHCI_USE_DMA; 1969 /* Load DMA buffer. */ 1970 if (slot->flags & SDHCI_USE_DMA) { 1971 sdma_bbufsz = slot->sdma_bbufsz; 1972 if (data->flags & MMC_DATA_READ) 1973 bus_dmamap_sync(slot->dmatag, slot->dmamap, 1974 BUS_DMASYNC_PREREAD); 1975 else { 1976 memcpy(slot->dmamem, data->data, ulmin(data->len, 1977 sdma_bbufsz)); 1978 bus_dmamap_sync(slot->dmatag, slot->dmamap, 1979 BUS_DMASYNC_PREWRITE); 1980 } 1981 WR4(slot, SDHCI_DMA_ADDRESS, slot->paddr); 1982 /* 1983 * Interrupt aggregation: Mask border interrupt for the last 1984 * bounce buffer and unmask otherwise. 1985 */ 1986 if (data->len == sdma_bbufsz) 1987 slot->intmask &= ~SDHCI_INT_DMA_END; 1988 else 1989 slot->intmask |= SDHCI_INT_DMA_END; 1990 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask); 1991 } 1992 /* Current data offset for both PIO and DMA. */ 1993 slot->offset = 0; 1994 #ifdef MMCCAM 1995 if (data->flags & MMC_DATA_BLOCK_SIZE) { 1996 /* Set block size and request border interrupts on the SDMA boundary. */ 1997 blksz = SDHCI_MAKE_BLKSZ(slot->sdma_boundary, data->block_size); 1998 blkcnt = data->block_count; 1999 if (__predict_false(sdhci_debug > 0)) 2000 slot_printf(slot, "SDIO Custom block params: blksz: " 2001 "%#10x, blk cnt: %#10x\n", blksz, blkcnt); 2002 } else 2003 #endif 2004 { 2005 /* Set block size and request border interrupts on the SDMA boundary. */ 2006 blksz = SDHCI_MAKE_BLKSZ(slot->sdma_boundary, ulmin(data->len, 512)); 2007 blkcnt = howmany(data->len, 512); 2008 } 2009 2010 WR2(slot, SDHCI_BLOCK_SIZE, blksz); 2011 WR2(slot, SDHCI_BLOCK_COUNT, blkcnt); 2012 if (__predict_false(sdhci_debug > 1)) 2013 slot_printf(slot, "Blk size: 0x%08x | Blk cnt: 0x%08x\n", 2014 blksz, blkcnt); 2015 } 2016 2017 void 2018 sdhci_finish_data(struct sdhci_slot *slot) 2019 { 2020 struct mmc_data *data = slot->curcmd->data; 2021 size_t left; 2022 2023 /* Interrupt aggregation: Restore command interrupt. 2024 * Auxiliary restore point for the case when data interrupt 2025 * happened first. */ 2026 if (!slot->cmd_done) { 2027 WR4(slot, SDHCI_SIGNAL_ENABLE, 2028 slot->intmask |= SDHCI_INT_RESPONSE); 2029 } 2030 /* Unload rest of data from DMA buffer. */ 2031 if (!slot->data_done && (slot->flags & SDHCI_USE_DMA) && 2032 slot->curcmd->data != NULL) { 2033 if (data->flags & MMC_DATA_READ) { 2034 left = data->len - slot->offset; 2035 bus_dmamap_sync(slot->dmatag, slot->dmamap, 2036 BUS_DMASYNC_POSTREAD); 2037 memcpy((u_char*)data->data + slot->offset, slot->dmamem, 2038 ulmin(left, slot->sdma_bbufsz)); 2039 } else 2040 bus_dmamap_sync(slot->dmatag, slot->dmamap, 2041 BUS_DMASYNC_POSTWRITE); 2042 } 2043 slot->data_done = 1; 2044 /* If there was error - reset the host. */ 2045 if (slot->curcmd->error) { 2046 if (slot->curcmd->error == MMC_ERR_BADCRC) 2047 slot->retune_req |= SDHCI_RETUNE_REQ_RESET; 2048 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_CMD); 2049 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_DATA); 2050 sdhci_start(slot); 2051 return; 2052 } 2053 /* If we already have command response - finish. */ 2054 if (slot->cmd_done) 2055 sdhci_start(slot); 2056 } 2057 2058 #ifdef MMCCAM 2059 static void 2060 sdhci_start(struct sdhci_slot *slot) 2061 { 2062 union ccb *ccb; 2063 struct ccb_mmcio *mmcio; 2064 2065 ccb = slot->ccb; 2066 if (ccb == NULL) 2067 return; 2068 2069 mmcio = &ccb->mmcio; 2070 if (!(slot->flags & CMD_STARTED)) { 2071 slot->flags |= CMD_STARTED; 2072 sdhci_start_command(slot, &mmcio->cmd); 2073 return; 2074 } 2075 2076 /* 2077 * Old stack doesn't use this! 2078 * Enabling this code causes significant performance degradation 2079 * and IRQ storms on BBB, Wandboard behaves fine. 2080 * Not using this code does no harm... 2081 if (!(slot->flags & STOP_STARTED) && mmcio->stop.opcode != 0) { 2082 slot->flags |= STOP_STARTED; 2083 sdhci_start_command(slot, &mmcio->stop); 2084 return; 2085 } 2086 */ 2087 if (__predict_false(sdhci_debug > 1)) 2088 slot_printf(slot, "result: %d\n", mmcio->cmd.error); 2089 if (mmcio->cmd.error == 0 && 2090 (slot->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { 2091 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_CMD); 2092 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_DATA); 2093 } 2094 2095 sdhci_req_done(slot); 2096 } 2097 #else 2098 static void 2099 sdhci_start(struct sdhci_slot *slot) 2100 { 2101 const struct mmc_request *req; 2102 2103 req = slot->req; 2104 if (req == NULL) 2105 return; 2106 2107 if (!(slot->flags & CMD_STARTED)) { 2108 slot->flags |= CMD_STARTED; 2109 sdhci_start_command(slot, req->cmd); 2110 return; 2111 } 2112 if ((slot->quirks & SDHCI_QUIRK_BROKEN_AUTO_STOP) && 2113 !(slot->flags & STOP_STARTED) && req->stop) { 2114 slot->flags |= STOP_STARTED; 2115 sdhci_start_command(slot, req->stop); 2116 return; 2117 } 2118 if (__predict_false(sdhci_debug > 1)) 2119 slot_printf(slot, "result: %d\n", req->cmd->error); 2120 if (!req->cmd->error && 2121 ((slot->curcmd == req->stop && 2122 (slot->quirks & SDHCI_QUIRK_BROKEN_AUTO_STOP)) || 2123 (slot->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { 2124 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_CMD); 2125 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_DATA); 2126 } 2127 2128 sdhci_req_done(slot); 2129 } 2130 #endif 2131 2132 int 2133 sdhci_generic_request(device_t brdev __unused, device_t reqdev, 2134 struct mmc_request *req) 2135 { 2136 struct sdhci_slot *slot = device_get_ivars(reqdev); 2137 2138 SDHCI_LOCK(slot); 2139 if (slot->req != NULL) { 2140 SDHCI_UNLOCK(slot); 2141 return (EBUSY); 2142 } 2143 if (__predict_false(sdhci_debug > 1)) { 2144 slot_printf(slot, 2145 "CMD%u arg %#x flags %#x dlen %u dflags %#x\n", 2146 req->cmd->opcode, req->cmd->arg, req->cmd->flags, 2147 (req->cmd->data)?(u_int)req->cmd->data->len:0, 2148 (req->cmd->data)?req->cmd->data->flags:0); 2149 } 2150 slot->req = req; 2151 slot->flags = 0; 2152 sdhci_start(slot); 2153 SDHCI_UNLOCK(slot); 2154 if (dumping) { 2155 while (slot->req != NULL) { 2156 sdhci_generic_intr(slot); 2157 DELAY(10); 2158 } 2159 } 2160 return (0); 2161 } 2162 2163 int 2164 sdhci_generic_get_ro(device_t brdev __unused, device_t reqdev) 2165 { 2166 struct sdhci_slot *slot = device_get_ivars(reqdev); 2167 uint32_t val; 2168 2169 SDHCI_LOCK(slot); 2170 val = RD4(slot, SDHCI_PRESENT_STATE); 2171 SDHCI_UNLOCK(slot); 2172 return (!(val & SDHCI_WRITE_PROTECT)); 2173 } 2174 2175 int 2176 sdhci_generic_acquire_host(device_t brdev __unused, device_t reqdev) 2177 { 2178 struct sdhci_slot *slot = device_get_ivars(reqdev); 2179 int err = 0; 2180 2181 SDHCI_LOCK(slot); 2182 while (slot->bus_busy) 2183 msleep(slot, &slot->mtx, 0, "sdhciah", 0); 2184 slot->bus_busy++; 2185 /* Activate led. */ 2186 WR1(slot, SDHCI_HOST_CONTROL, slot->hostctrl |= SDHCI_CTRL_LED); 2187 SDHCI_UNLOCK(slot); 2188 return (err); 2189 } 2190 2191 int 2192 sdhci_generic_release_host(device_t brdev __unused, device_t reqdev) 2193 { 2194 struct sdhci_slot *slot = device_get_ivars(reqdev); 2195 2196 SDHCI_LOCK(slot); 2197 /* Deactivate led. */ 2198 WR1(slot, SDHCI_HOST_CONTROL, slot->hostctrl &= ~SDHCI_CTRL_LED); 2199 slot->bus_busy--; 2200 wakeup(slot); 2201 SDHCI_UNLOCK(slot); 2202 return (0); 2203 } 2204 2205 static void 2206 sdhci_cmd_irq(struct sdhci_slot *slot, uint32_t intmask) 2207 { 2208 2209 if (!slot->curcmd) { 2210 slot_printf(slot, "Got command interrupt 0x%08x, but " 2211 "there is no active command.\n", intmask); 2212 sdhci_dumpregs(slot); 2213 return; 2214 } 2215 if (intmask & SDHCI_INT_TIMEOUT) 2216 slot->curcmd->error = MMC_ERR_TIMEOUT; 2217 else if (intmask & SDHCI_INT_CRC) 2218 slot->curcmd->error = MMC_ERR_BADCRC; 2219 else if (intmask & (SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) 2220 slot->curcmd->error = MMC_ERR_FIFO; 2221 2222 sdhci_finish_command(slot); 2223 } 2224 2225 static void 2226 sdhci_data_irq(struct sdhci_slot *slot, uint32_t intmask) 2227 { 2228 struct mmc_data *data; 2229 size_t left; 2230 uint32_t sdma_bbufsz; 2231 2232 if (!slot->curcmd) { 2233 slot_printf(slot, "Got data interrupt 0x%08x, but " 2234 "there is no active command.\n", intmask); 2235 sdhci_dumpregs(slot); 2236 return; 2237 } 2238 if (slot->curcmd->data == NULL && 2239 (slot->curcmd->flags & MMC_RSP_BUSY) == 0) { 2240 slot_printf(slot, "Got data interrupt 0x%08x, but " 2241 "there is no active data operation.\n", 2242 intmask); 2243 sdhci_dumpregs(slot); 2244 return; 2245 } 2246 if (intmask & SDHCI_INT_DATA_TIMEOUT) 2247 slot->curcmd->error = MMC_ERR_TIMEOUT; 2248 else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) 2249 slot->curcmd->error = MMC_ERR_BADCRC; 2250 if (slot->curcmd->data == NULL && 2251 (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | 2252 SDHCI_INT_DMA_END))) { 2253 slot_printf(slot, "Got data interrupt 0x%08x, but " 2254 "there is busy-only command.\n", intmask); 2255 sdhci_dumpregs(slot); 2256 slot->curcmd->error = MMC_ERR_INVALID; 2257 } 2258 if (slot->curcmd->error) { 2259 /* No need to continue after any error. */ 2260 goto done; 2261 } 2262 2263 /* Handle tuning completion interrupt. */ 2264 if (__predict_false((intmask & SDHCI_INT_DATA_AVAIL) && 2265 (slot->curcmd->opcode == MMC_SEND_TUNING_BLOCK || 2266 slot->curcmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))) { 2267 slot->req->flags |= MMC_TUNE_DONE; 2268 sdhci_finish_command(slot); 2269 sdhci_finish_data(slot); 2270 return; 2271 } 2272 /* Handle PIO interrupt. */ 2273 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) { 2274 if ((slot->opt & SDHCI_PLATFORM_TRANSFER) && 2275 SDHCI_PLATFORM_WILL_HANDLE(slot->bus, slot)) { 2276 SDHCI_PLATFORM_START_TRANSFER(slot->bus, slot, 2277 &intmask); 2278 slot->flags |= PLATFORM_DATA_STARTED; 2279 } else 2280 sdhci_transfer_pio(slot); 2281 } 2282 /* Handle DMA border. */ 2283 if (intmask & SDHCI_INT_DMA_END) { 2284 data = slot->curcmd->data; 2285 sdma_bbufsz = slot->sdma_bbufsz; 2286 2287 /* Unload DMA buffer ... */ 2288 left = data->len - slot->offset; 2289 if (data->flags & MMC_DATA_READ) { 2290 bus_dmamap_sync(slot->dmatag, slot->dmamap, 2291 BUS_DMASYNC_POSTREAD); 2292 memcpy((u_char*)data->data + slot->offset, slot->dmamem, 2293 ulmin(left, sdma_bbufsz)); 2294 } else { 2295 bus_dmamap_sync(slot->dmatag, slot->dmamap, 2296 BUS_DMASYNC_POSTWRITE); 2297 } 2298 /* ... and reload it again. */ 2299 slot->offset += sdma_bbufsz; 2300 left = data->len - slot->offset; 2301 if (data->flags & MMC_DATA_READ) { 2302 bus_dmamap_sync(slot->dmatag, slot->dmamap, 2303 BUS_DMASYNC_PREREAD); 2304 } else { 2305 memcpy(slot->dmamem, (u_char*)data->data + slot->offset, 2306 ulmin(left, sdma_bbufsz)); 2307 bus_dmamap_sync(slot->dmatag, slot->dmamap, 2308 BUS_DMASYNC_PREWRITE); 2309 } 2310 /* 2311 * Interrupt aggregation: Mask border interrupt for the last 2312 * bounce buffer. 2313 */ 2314 if (left == sdma_bbufsz) { 2315 slot->intmask &= ~SDHCI_INT_DMA_END; 2316 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask); 2317 } 2318 /* Restart DMA. */ 2319 WR4(slot, SDHCI_DMA_ADDRESS, slot->paddr); 2320 } 2321 /* We have got all data. */ 2322 if (intmask & SDHCI_INT_DATA_END) { 2323 if (slot->flags & PLATFORM_DATA_STARTED) { 2324 slot->flags &= ~PLATFORM_DATA_STARTED; 2325 SDHCI_PLATFORM_FINISH_TRANSFER(slot->bus, slot); 2326 } else 2327 sdhci_finish_data(slot); 2328 } 2329 done: 2330 if (slot->curcmd != NULL && slot->curcmd->error != 0) { 2331 if (slot->flags & PLATFORM_DATA_STARTED) { 2332 slot->flags &= ~PLATFORM_DATA_STARTED; 2333 SDHCI_PLATFORM_FINISH_TRANSFER(slot->bus, slot); 2334 } else 2335 sdhci_finish_data(slot); 2336 } 2337 } 2338 2339 static void 2340 sdhci_acmd_irq(struct sdhci_slot *slot, uint16_t acmd_err) 2341 { 2342 2343 if (!slot->curcmd) { 2344 slot_printf(slot, "Got AutoCMD12 error 0x%04x, but " 2345 "there is no active command.\n", acmd_err); 2346 sdhci_dumpregs(slot); 2347 return; 2348 } 2349 slot_printf(slot, "Got AutoCMD12 error 0x%04x\n", acmd_err); 2350 SDHCI_RESET(slot->bus, slot, SDHCI_RESET_CMD); 2351 } 2352 2353 void 2354 sdhci_generic_intr(struct sdhci_slot *slot) 2355 { 2356 uint32_t intmask, present; 2357 uint16_t val16; 2358 2359 SDHCI_LOCK(slot); 2360 /* Read slot interrupt status. */ 2361 intmask = RD4(slot, SDHCI_INT_STATUS); 2362 if (intmask == 0 || intmask == 0xffffffff) { 2363 SDHCI_UNLOCK(slot); 2364 return; 2365 } 2366 if (__predict_false(sdhci_debug > 2)) 2367 slot_printf(slot, "Interrupt %#x\n", intmask); 2368 2369 /* Handle tuning error interrupt. */ 2370 if (__predict_false(intmask & SDHCI_INT_TUNEERR)) { 2371 WR4(slot, SDHCI_INT_STATUS, SDHCI_INT_TUNEERR); 2372 slot_printf(slot, "Tuning error indicated\n"); 2373 slot->retune_req |= SDHCI_RETUNE_REQ_RESET; 2374 if (slot->curcmd) { 2375 slot->curcmd->error = MMC_ERR_BADCRC; 2376 sdhci_finish_command(slot); 2377 } 2378 } 2379 /* Handle re-tuning interrupt. */ 2380 if (__predict_false(intmask & SDHCI_INT_RETUNE)) 2381 slot->retune_req |= SDHCI_RETUNE_REQ_NEEDED; 2382 /* Handle card presence interrupts. */ 2383 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) { 2384 present = (intmask & SDHCI_INT_CARD_INSERT) != 0; 2385 slot->intmask &= 2386 ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE); 2387 slot->intmask |= present ? SDHCI_INT_CARD_REMOVE : 2388 SDHCI_INT_CARD_INSERT; 2389 WR4(slot, SDHCI_INT_ENABLE, slot->intmask); 2390 WR4(slot, SDHCI_SIGNAL_ENABLE, slot->intmask); 2391 WR4(slot, SDHCI_INT_STATUS, intmask & 2392 (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)); 2393 sdhci_handle_card_present_locked(slot, present); 2394 } 2395 /* Handle command interrupts. */ 2396 if (intmask & SDHCI_INT_CMD_MASK) { 2397 WR4(slot, SDHCI_INT_STATUS, intmask & SDHCI_INT_CMD_MASK); 2398 sdhci_cmd_irq(slot, intmask & SDHCI_INT_CMD_MASK); 2399 } 2400 /* Handle data interrupts. */ 2401 if (intmask & SDHCI_INT_DATA_MASK) { 2402 WR4(slot, SDHCI_INT_STATUS, intmask & SDHCI_INT_DATA_MASK); 2403 /* Don't call data_irq in case of errored command. */ 2404 if ((intmask & SDHCI_INT_CMD_ERROR_MASK) == 0) 2405 sdhci_data_irq(slot, intmask & SDHCI_INT_DATA_MASK); 2406 } 2407 /* Handle AutoCMD12 error interrupt. */ 2408 if (intmask & SDHCI_INT_ACMD12ERR) { 2409 /* Clearing SDHCI_INT_ACMD12ERR may clear SDHCI_ACMD12_ERR. */ 2410 val16 = RD2(slot, SDHCI_ACMD12_ERR); 2411 WR4(slot, SDHCI_INT_STATUS, SDHCI_INT_ACMD12ERR); 2412 sdhci_acmd_irq(slot, val16); 2413 } 2414 /* Handle bus power interrupt. */ 2415 if (intmask & SDHCI_INT_BUS_POWER) { 2416 WR4(slot, SDHCI_INT_STATUS, SDHCI_INT_BUS_POWER); 2417 slot_printf(slot, "Card is consuming too much power!\n"); 2418 } 2419 intmask &= ~(SDHCI_INT_ERROR | SDHCI_INT_TUNEERR | SDHCI_INT_RETUNE | 2420 SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | SDHCI_INT_CMD_MASK | 2421 SDHCI_INT_DATA_MASK | SDHCI_INT_ACMD12ERR | SDHCI_INT_BUS_POWER); 2422 /* The rest is unknown. */ 2423 if (intmask) { 2424 WR4(slot, SDHCI_INT_STATUS, intmask); 2425 slot_printf(slot, "Unexpected interrupt 0x%08x.\n", 2426 intmask); 2427 sdhci_dumpregs(slot); 2428 } 2429 2430 SDHCI_UNLOCK(slot); 2431 } 2432 2433 int 2434 sdhci_generic_read_ivar(device_t bus, device_t child, int which, 2435 uintptr_t *result) 2436 { 2437 const struct sdhci_slot *slot = device_get_ivars(child); 2438 2439 switch (which) { 2440 default: 2441 return (EINVAL); 2442 case MMCBR_IVAR_BUS_MODE: 2443 *result = slot->host.ios.bus_mode; 2444 break; 2445 case MMCBR_IVAR_BUS_WIDTH: 2446 *result = slot->host.ios.bus_width; 2447 break; 2448 case MMCBR_IVAR_CHIP_SELECT: 2449 *result = slot->host.ios.chip_select; 2450 break; 2451 case MMCBR_IVAR_CLOCK: 2452 *result = slot->host.ios.clock; 2453 break; 2454 case MMCBR_IVAR_F_MIN: 2455 *result = slot->host.f_min; 2456 break; 2457 case MMCBR_IVAR_F_MAX: 2458 *result = slot->host.f_max; 2459 break; 2460 case MMCBR_IVAR_HOST_OCR: 2461 *result = slot->host.host_ocr; 2462 break; 2463 case MMCBR_IVAR_MODE: 2464 *result = slot->host.mode; 2465 break; 2466 case MMCBR_IVAR_OCR: 2467 *result = slot->host.ocr; 2468 break; 2469 case MMCBR_IVAR_POWER_MODE: 2470 *result = slot->host.ios.power_mode; 2471 break; 2472 case MMCBR_IVAR_VDD: 2473 *result = slot->host.ios.vdd; 2474 break; 2475 case MMCBR_IVAR_RETUNE_REQ: 2476 if (slot->opt & SDHCI_TUNING_ENABLED) { 2477 if (slot->retune_req & SDHCI_RETUNE_REQ_RESET) { 2478 *result = retune_req_reset; 2479 break; 2480 } 2481 if (slot->retune_req & SDHCI_RETUNE_REQ_NEEDED) { 2482 *result = retune_req_normal; 2483 break; 2484 } 2485 } 2486 *result = retune_req_none; 2487 break; 2488 case MMCBR_IVAR_VCCQ: 2489 *result = slot->host.ios.vccq; 2490 break; 2491 case MMCBR_IVAR_CAPS: 2492 *result = slot->host.caps; 2493 break; 2494 case MMCBR_IVAR_TIMING: 2495 *result = slot->host.ios.timing; 2496 break; 2497 case MMCBR_IVAR_MAX_DATA: 2498 /* 2499 * Re-tuning modes 1 and 2 restrict the maximum data length 2500 * per read/write command to 4 MiB. 2501 */ 2502 if (slot->opt & SDHCI_TUNING_ENABLED && 2503 (slot->retune_mode == SDHCI_RETUNE_MODE_1 || 2504 slot->retune_mode == SDHCI_RETUNE_MODE_2)) { 2505 *result = 4 * 1024 * 1024 / MMC_SECTOR_SIZE; 2506 break; 2507 } 2508 *result = 65535; 2509 break; 2510 case MMCBR_IVAR_MAX_BUSY_TIMEOUT: 2511 /* 2512 * Currently, sdhci_start_data() hardcodes 1 s for all CMDs. 2513 */ 2514 *result = 1000000; 2515 break; 2516 } 2517 return (0); 2518 } 2519 2520 int 2521 sdhci_generic_write_ivar(device_t bus, device_t child, int which, 2522 uintptr_t value) 2523 { 2524 struct sdhci_slot *slot = device_get_ivars(child); 2525 uint32_t clock, max_clock; 2526 int i; 2527 2528 if (sdhci_debug > 1) 2529 slot_printf(slot, "%s: var=%d\n", __func__, which); 2530 switch (which) { 2531 default: 2532 return (EINVAL); 2533 case MMCBR_IVAR_BUS_MODE: 2534 slot->host.ios.bus_mode = value; 2535 break; 2536 case MMCBR_IVAR_BUS_WIDTH: 2537 slot->host.ios.bus_width = value; 2538 break; 2539 case MMCBR_IVAR_CHIP_SELECT: 2540 slot->host.ios.chip_select = value; 2541 break; 2542 case MMCBR_IVAR_CLOCK: 2543 if (value > 0) { 2544 max_clock = slot->max_clk; 2545 clock = max_clock; 2546 2547 if (slot->version < SDHCI_SPEC_300) { 2548 for (i = 0; i < SDHCI_200_MAX_DIVIDER; 2549 i <<= 1) { 2550 if (clock <= value) 2551 break; 2552 clock >>= 1; 2553 } 2554 } else { 2555 for (i = 0; i < SDHCI_300_MAX_DIVIDER; 2556 i += 2) { 2557 if (clock <= value) 2558 break; 2559 clock = max_clock / (i + 2); 2560 } 2561 } 2562 2563 slot->host.ios.clock = clock; 2564 } else 2565 slot->host.ios.clock = 0; 2566 break; 2567 case MMCBR_IVAR_MODE: 2568 slot->host.mode = value; 2569 break; 2570 case MMCBR_IVAR_OCR: 2571 slot->host.ocr = value; 2572 break; 2573 case MMCBR_IVAR_POWER_MODE: 2574 slot->host.ios.power_mode = value; 2575 break; 2576 case MMCBR_IVAR_VDD: 2577 slot->host.ios.vdd = value; 2578 break; 2579 case MMCBR_IVAR_VCCQ: 2580 slot->host.ios.vccq = value; 2581 break; 2582 case MMCBR_IVAR_TIMING: 2583 slot->host.ios.timing = value; 2584 break; 2585 case MMCBR_IVAR_CAPS: 2586 case MMCBR_IVAR_HOST_OCR: 2587 case MMCBR_IVAR_F_MIN: 2588 case MMCBR_IVAR_F_MAX: 2589 case MMCBR_IVAR_MAX_DATA: 2590 case MMCBR_IVAR_RETUNE_REQ: 2591 return (EINVAL); 2592 } 2593 return (0); 2594 } 2595 2596 #ifdef MMCCAM 2597 void 2598 sdhci_start_slot(struct sdhci_slot *slot) 2599 { 2600 2601 if ((slot->devq = cam_simq_alloc(1)) == NULL) 2602 goto fail; 2603 2604 mtx_init(&slot->sim_mtx, "sdhcisim", NULL, MTX_DEF); 2605 slot->sim = cam_sim_alloc(sdhci_cam_action, sdhci_cam_poll, 2606 "sdhci_slot", slot, device_get_unit(slot->bus), 2607 &slot->sim_mtx, 1, 1, slot->devq); 2608 2609 if (slot->sim == NULL) { 2610 cam_simq_free(slot->devq); 2611 slot_printf(slot, "cannot allocate CAM SIM\n"); 2612 goto fail; 2613 } 2614 2615 mtx_lock(&slot->sim_mtx); 2616 if (xpt_bus_register(slot->sim, slot->bus, 0) != 0) { 2617 slot_printf(slot, "cannot register SCSI pass-through bus\n"); 2618 cam_sim_free(slot->sim, FALSE); 2619 cam_simq_free(slot->devq); 2620 mtx_unlock(&slot->sim_mtx); 2621 goto fail; 2622 } 2623 mtx_unlock(&slot->sim_mtx); 2624 2625 /* End CAM-specific init */ 2626 slot->card_present = 0; 2627 sdhci_card_task(slot, 0); 2628 return; 2629 2630 fail: 2631 if (slot->sim != NULL) { 2632 mtx_lock(&slot->sim_mtx); 2633 xpt_bus_deregister(cam_sim_path(slot->sim)); 2634 cam_sim_free(slot->sim, FALSE); 2635 mtx_unlock(&slot->sim_mtx); 2636 } 2637 2638 if (slot->devq != NULL) 2639 cam_simq_free(slot->devq); 2640 } 2641 2642 void 2643 sdhci_cam_action(struct cam_sim *sim, union ccb *ccb) 2644 { 2645 struct sdhci_slot *slot; 2646 2647 slot = cam_sim_softc(sim); 2648 if (slot == NULL) { 2649 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2650 xpt_done(ccb); 2651 return; 2652 } 2653 2654 mtx_assert(&slot->sim_mtx, MA_OWNED); 2655 2656 switch (ccb->ccb_h.func_code) { 2657 case XPT_PATH_INQ: 2658 mmc_path_inq(&ccb->cpi, "Deglitch Networks", sim, maxphys); 2659 break; 2660 2661 case XPT_MMC_GET_TRAN_SETTINGS: 2662 case XPT_GET_TRAN_SETTINGS: 2663 { 2664 struct ccb_trans_settings *cts = &ccb->cts; 2665 uint32_t max_data; 2666 2667 if (sdhci_debug > 1) 2668 slot_printf(slot, "Got XPT_GET_TRAN_SETTINGS\n"); 2669 2670 cts->protocol = PROTO_MMCSD; 2671 cts->protocol_version = 1; 2672 cts->transport = XPORT_MMCSD; 2673 cts->transport_version = 1; 2674 cts->xport_specific.valid = 0; 2675 cts->proto_specific.mmc.host_ocr = slot->host.host_ocr; 2676 cts->proto_specific.mmc.host_f_min = slot->host.f_min; 2677 cts->proto_specific.mmc.host_f_max = slot->host.f_max; 2678 cts->proto_specific.mmc.host_caps = slot->host.caps; 2679 /* 2680 * Re-tuning modes 1 and 2 restrict the maximum data length 2681 * per read/write command to 4 MiB. 2682 */ 2683 if (slot->opt & SDHCI_TUNING_ENABLED && 2684 (slot->retune_mode == SDHCI_RETUNE_MODE_1 || 2685 slot->retune_mode == SDHCI_RETUNE_MODE_2)) { 2686 max_data = 4 * 1024 * 1024 / MMC_SECTOR_SIZE; 2687 } else { 2688 max_data = 65535; 2689 } 2690 cts->proto_specific.mmc.host_max_data = max_data; 2691 2692 memcpy(&cts->proto_specific.mmc.ios, &slot->host.ios, sizeof(struct mmc_ios)); 2693 ccb->ccb_h.status = CAM_REQ_CMP; 2694 break; 2695 } 2696 case XPT_MMC_SET_TRAN_SETTINGS: 2697 case XPT_SET_TRAN_SETTINGS: 2698 if (sdhci_debug > 1) 2699 slot_printf(slot, "Got XPT_SET_TRAN_SETTINGS\n"); 2700 sdhci_cam_settran_settings(slot, ccb); 2701 ccb->ccb_h.status = CAM_REQ_CMP; 2702 break; 2703 case XPT_RESET_BUS: 2704 if (sdhci_debug > 1) 2705 slot_printf(slot, "Got XPT_RESET_BUS, ACK it...\n"); 2706 ccb->ccb_h.status = CAM_REQ_CMP; 2707 break; 2708 case XPT_MMC_IO: 2709 /* 2710 * Here is the HW-dependent part of 2711 * sending the command to the underlying h/w 2712 * At some point in the future an interrupt comes. 2713 * Then the request will be marked as completed. 2714 */ 2715 if (__predict_false(sdhci_debug > 1)) 2716 slot_printf(slot, "Got XPT_MMC_IO\n"); 2717 ccb->ccb_h.status = CAM_REQ_INPROG; 2718 2719 sdhci_cam_request(cam_sim_softc(sim), ccb); 2720 return; 2721 default: 2722 ccb->ccb_h.status = CAM_REQ_INVALID; 2723 break; 2724 } 2725 xpt_done(ccb); 2726 return; 2727 } 2728 2729 void 2730 sdhci_cam_poll(struct cam_sim *sim) 2731 { 2732 sdhci_generic_intr(cam_sim_softc(sim)); 2733 } 2734 2735 static int 2736 sdhci_cam_get_possible_host_clock(const struct sdhci_slot *slot, 2737 int proposed_clock) 2738 { 2739 int max_clock, clock, i; 2740 2741 if (proposed_clock == 0) 2742 return 0; 2743 max_clock = slot->max_clk; 2744 clock = max_clock; 2745 2746 if (slot->version < SDHCI_SPEC_300) { 2747 for (i = 0; i < SDHCI_200_MAX_DIVIDER; i <<= 1) { 2748 if (clock <= proposed_clock) 2749 break; 2750 clock >>= 1; 2751 } 2752 } else { 2753 for (i = 0; i < SDHCI_300_MAX_DIVIDER; i += 2) { 2754 if (clock <= proposed_clock) 2755 break; 2756 clock = max_clock / (i + 2); 2757 } 2758 } 2759 return clock; 2760 } 2761 2762 static int 2763 sdhci_cam_settran_settings(struct sdhci_slot *slot, union ccb *ccb) 2764 { 2765 struct mmc_ios *ios; 2766 const struct mmc_ios *new_ios; 2767 const struct ccb_trans_settings_mmc *cts; 2768 2769 ios = &slot->host.ios; 2770 cts = &ccb->cts.proto_specific.mmc; 2771 new_ios = &cts->ios; 2772 2773 /* Update only requested fields */ 2774 if (cts->ios_valid & MMC_CLK) { 2775 ios->clock = sdhci_cam_get_possible_host_clock(slot, new_ios->clock); 2776 if (sdhci_debug > 1) 2777 slot_printf(slot, "Clock => %d\n", ios->clock); 2778 } 2779 if (cts->ios_valid & MMC_VDD) { 2780 ios->vdd = new_ios->vdd; 2781 if (sdhci_debug > 1) 2782 slot_printf(slot, "VDD => %d\n", ios->vdd); 2783 } 2784 if (cts->ios_valid & MMC_CS) { 2785 ios->chip_select = new_ios->chip_select; 2786 if (sdhci_debug > 1) 2787 slot_printf(slot, "CS => %d\n", ios->chip_select); 2788 } 2789 if (cts->ios_valid & MMC_BW) { 2790 ios->bus_width = new_ios->bus_width; 2791 if (sdhci_debug > 1) 2792 slot_printf(slot, "Bus width => %d\n", ios->bus_width); 2793 } 2794 if (cts->ios_valid & MMC_PM) { 2795 ios->power_mode = new_ios->power_mode; 2796 if (sdhci_debug > 1) 2797 slot_printf(slot, "Power mode => %d\n", ios->power_mode); 2798 } 2799 if (cts->ios_valid & MMC_BT) { 2800 ios->timing = new_ios->timing; 2801 if (sdhci_debug > 1) 2802 slot_printf(slot, "Timing => %d\n", ios->timing); 2803 } 2804 if (cts->ios_valid & MMC_BM) { 2805 ios->bus_mode = new_ios->bus_mode; 2806 if (sdhci_debug > 1) 2807 slot_printf(slot, "Bus mode => %d\n", ios->bus_mode); 2808 } 2809 if (cts->ios_valid & MMC_VCCQ) { 2810 ios->vccq = new_ios->vccq; 2811 if (sdhci_debug > 1) 2812 slot_printf(slot, "VCCQ => %d\n", ios->vccq); 2813 } 2814 2815 /* XXX Provide a way to call a chip-specific IOS update, required for TI */ 2816 return (sdhci_cam_update_ios(slot)); 2817 } 2818 2819 static int 2820 sdhci_cam_update_ios(struct sdhci_slot *slot) 2821 { 2822 struct mmc_ios *ios = &slot->host.ios; 2823 2824 if (sdhci_debug > 1) 2825 slot_printf(slot, "%s: power_mode=%d, clk=%d, bus_width=%d, timing=%d\n", 2826 __func__, ios->power_mode, ios->clock, ios->bus_width, ios->timing); 2827 SDHCI_LOCK(slot); 2828 /* Do full reset on bus power down to clear from any state. */ 2829 if (ios->power_mode == power_off) { 2830 WR4(slot, SDHCI_SIGNAL_ENABLE, 0); 2831 sdhci_init(slot); 2832 } 2833 /* Configure the bus. */ 2834 sdhci_set_clock(slot, ios->clock); 2835 sdhci_set_power(slot, (ios->power_mode == power_off) ? 0 : ios->vdd); 2836 if (ios->bus_width == bus_width_8) { 2837 slot->hostctrl |= SDHCI_CTRL_8BITBUS; 2838 slot->hostctrl &= ~SDHCI_CTRL_4BITBUS; 2839 } else if (ios->bus_width == bus_width_4) { 2840 slot->hostctrl &= ~SDHCI_CTRL_8BITBUS; 2841 slot->hostctrl |= SDHCI_CTRL_4BITBUS; 2842 } else if (ios->bus_width == bus_width_1) { 2843 slot->hostctrl &= ~SDHCI_CTRL_8BITBUS; 2844 slot->hostctrl &= ~SDHCI_CTRL_4BITBUS; 2845 } else { 2846 panic("Invalid bus width: %d", ios->bus_width); 2847 } 2848 if (ios->timing == bus_timing_hs && 2849 !(slot->quirks & SDHCI_QUIRK_DONT_SET_HISPD_BIT)) 2850 slot->hostctrl |= SDHCI_CTRL_HISPD; 2851 else 2852 slot->hostctrl &= ~SDHCI_CTRL_HISPD; 2853 WR1(slot, SDHCI_HOST_CONTROL, slot->hostctrl); 2854 /* Some controllers like reset after bus changes. */ 2855 if(slot->quirks & SDHCI_QUIRK_RESET_ON_IOS) 2856 SDHCI_RESET(slot->bus, slot, 2857 SDHCI_RESET_CMD | SDHCI_RESET_DATA); 2858 2859 SDHCI_UNLOCK(slot); 2860 return (0); 2861 } 2862 2863 static int 2864 sdhci_cam_request(struct sdhci_slot *slot, union ccb *ccb) 2865 { 2866 const struct ccb_mmcio *mmcio; 2867 2868 mmcio = &ccb->mmcio; 2869 2870 SDHCI_LOCK(slot); 2871 /* if (slot->req != NULL) { 2872 SDHCI_UNLOCK(slot); 2873 return (EBUSY); 2874 } 2875 */ 2876 if (__predict_false(sdhci_debug > 1)) { 2877 slot_printf(slot, "CMD%u arg %#x flags %#x dlen %u dflags %#x " 2878 "blksz=%zu blkcnt=%zu\n", 2879 mmcio->cmd.opcode, mmcio->cmd.arg, mmcio->cmd.flags, 2880 mmcio->cmd.data != NULL ? (unsigned int) mmcio->cmd.data->len : 0, 2881 mmcio->cmd.data != NULL ? mmcio->cmd.data->flags : 0, 2882 mmcio->cmd.data != NULL ? mmcio->cmd.data->block_size : 0, 2883 mmcio->cmd.data != NULL ? mmcio->cmd.data->block_count : 0); 2884 } 2885 if (mmcio->cmd.data != NULL) { 2886 if (mmcio->cmd.data->len == 0 || mmcio->cmd.data->flags == 0) 2887 panic("data->len = %d, data->flags = %d -- something is b0rked", 2888 (int)mmcio->cmd.data->len, mmcio->cmd.data->flags); 2889 } 2890 slot->ccb = ccb; 2891 slot->flags = 0; 2892 sdhci_start(slot); 2893 SDHCI_UNLOCK(slot); 2894 return (0); 2895 } 2896 #endif /* MMCCAM */ 2897 2898 MODULE_VERSION(sdhci, SDHCI_VERSION); 2899