xref: /freebsd/sys/dev/safexcel/safexcel.c (revision 105fd928b0b5b35ab529e5f6914788dc49582901)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2020, 2021 Rubicon Communications, LLC (Netgate)
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/bus.h>
32 #include <sys/counter.h>
33 #include <sys/endian.h>
34 #include <sys/kernel.h>
35 #include <sys/lock.h>
36 #include <sys/malloc.h>
37 #include <sys/module.h>
38 #include <sys/mutex.h>
39 #include <sys/rman.h>
40 #include <sys/smp.h>
41 #include <sys/sglist.h>
42 #include <sys/sysctl.h>
43 
44 #include <machine/atomic.h>
45 #include <machine/bus.h>
46 
47 #include <crypto/rijndael/rijndael.h>
48 #include <opencrypto/cryptodev.h>
49 #include <opencrypto/xform.h>
50 
51 #include <dev/ofw/ofw_bus.h>
52 #include <dev/ofw/ofw_bus_subr.h>
53 
54 #include "cryptodev_if.h"
55 
56 #include "safexcel_reg.h"
57 #include "safexcel_var.h"
58 
59 /*
60  * We only support the EIP97 for now.
61  */
62 static struct ofw_compat_data safexcel_compat[] = {
63 	{ "inside-secure,safexcel-eip97ies",	(uintptr_t)97 },
64 	{ "inside-secure,safexcel-eip97",	(uintptr_t)97 },
65 	{ NULL,					0 }
66 };
67 
68 const struct safexcel_reg_offsets eip97_regs_offset = {
69 	.hia_aic	= SAFEXCEL_EIP97_HIA_AIC_BASE,
70 	.hia_aic_g	= SAFEXCEL_EIP97_HIA_AIC_G_BASE,
71 	.hia_aic_r	= SAFEXCEL_EIP97_HIA_AIC_R_BASE,
72 	.hia_aic_xdr	= SAFEXCEL_EIP97_HIA_AIC_xDR_BASE,
73 	.hia_dfe	= SAFEXCEL_EIP97_HIA_DFE_BASE,
74 	.hia_dfe_thr	= SAFEXCEL_EIP97_HIA_DFE_THR_BASE,
75 	.hia_dse	= SAFEXCEL_EIP97_HIA_DSE_BASE,
76 	.hia_dse_thr	= SAFEXCEL_EIP97_HIA_DSE_THR_BASE,
77 	.hia_gen_cfg	= SAFEXCEL_EIP97_HIA_GEN_CFG_BASE,
78 	.pe		= SAFEXCEL_EIP97_PE_BASE,
79 };
80 
81 const struct safexcel_reg_offsets eip197_regs_offset = {
82 	.hia_aic	= SAFEXCEL_EIP197_HIA_AIC_BASE,
83 	.hia_aic_g	= SAFEXCEL_EIP197_HIA_AIC_G_BASE,
84 	.hia_aic_r	= SAFEXCEL_EIP197_HIA_AIC_R_BASE,
85 	.hia_aic_xdr	= SAFEXCEL_EIP197_HIA_AIC_xDR_BASE,
86 	.hia_dfe	= SAFEXCEL_EIP197_HIA_DFE_BASE,
87 	.hia_dfe_thr	= SAFEXCEL_EIP197_HIA_DFE_THR_BASE,
88 	.hia_dse	= SAFEXCEL_EIP197_HIA_DSE_BASE,
89 	.hia_dse_thr	= SAFEXCEL_EIP197_HIA_DSE_THR_BASE,
90 	.hia_gen_cfg	= SAFEXCEL_EIP197_HIA_GEN_CFG_BASE,
91 	.pe		= SAFEXCEL_EIP197_PE_BASE,
92 };
93 
94 static struct safexcel_request *
95 safexcel_next_request(struct safexcel_ring *ring)
96 {
97 	int i;
98 
99 	i = ring->cdr.read;
100 	KASSERT(i >= 0 && i < SAFEXCEL_RING_SIZE,
101 	    ("%s: out of bounds request index %d", __func__, i));
102 	return (&ring->requests[i]);
103 }
104 
105 static struct safexcel_cmd_descr *
106 safexcel_cmd_descr_next(struct safexcel_cmd_descr_ring *ring)
107 {
108 	struct safexcel_cmd_descr *cdesc;
109 
110 	if (ring->write == ring->read)
111 		return (NULL);
112 	cdesc = &ring->desc[ring->read];
113 	ring->read = (ring->read + 1) % SAFEXCEL_RING_SIZE;
114 	return (cdesc);
115 }
116 
117 static struct safexcel_res_descr *
118 safexcel_res_descr_next(struct safexcel_res_descr_ring *ring)
119 {
120 	struct safexcel_res_descr *rdesc;
121 
122 	if (ring->write == ring->read)
123 		return (NULL);
124 	rdesc = &ring->desc[ring->read];
125 	ring->read = (ring->read + 1) % SAFEXCEL_RING_SIZE;
126 	return (rdesc);
127 }
128 
129 static struct safexcel_request *
130 safexcel_alloc_request(struct safexcel_softc *sc, struct safexcel_ring *ring)
131 {
132 	int i;
133 
134 	mtx_assert(&ring->mtx, MA_OWNED);
135 
136 	i = ring->cdr.write;
137 	if ((i + 1) % SAFEXCEL_RING_SIZE == ring->cdr.read)
138 		return (NULL);
139 	return (&ring->requests[i]);
140 }
141 
142 static void
143 safexcel_free_request(struct safexcel_ring *ring, struct safexcel_request *req)
144 {
145 	struct safexcel_context_record *ctx;
146 
147 	mtx_assert(&ring->mtx, MA_OWNED);
148 
149 	if (req->dmap_loaded) {
150 		bus_dmamap_unload(ring->data_dtag, req->dmap);
151 		req->dmap_loaded = false;
152 	}
153 	ctx = (struct safexcel_context_record *)req->ctx.vaddr;
154 	explicit_bzero(ctx->data, sizeof(ctx->data));
155 	explicit_bzero(req->iv, sizeof(req->iv));
156 }
157 
158 static void
159 safexcel_rdr_intr(struct safexcel_softc *sc, int ringidx)
160 {
161 	TAILQ_HEAD(, cryptop) cq;
162 	struct cryptop *crp, *tmp;
163 	struct safexcel_cmd_descr *cdesc;
164 	struct safexcel_res_descr *rdesc;
165 	struct safexcel_request *req;
166 	struct safexcel_ring *ring;
167 	uint32_t blocked, error, i, ncdescs, nrdescs, nreqs;
168 
169 	blocked = 0;
170 	ring = &sc->sc_ring[ringidx];
171 
172 	nreqs = SAFEXCEL_READ(sc,
173 	    SAFEXCEL_HIA_RDR(sc, ringidx) + SAFEXCEL_HIA_xDR_PROC_COUNT);
174 	nreqs >>= SAFEXCEL_xDR_PROC_xD_PKT_OFFSET;
175 	nreqs &= SAFEXCEL_xDR_PROC_xD_PKT_MASK;
176 	if (nreqs == 0) {
177 		SAFEXCEL_DPRINTF(sc, 1,
178 		    "zero pending requests on ring %d\n", ringidx);
179 		mtx_lock(&ring->mtx);
180 		goto out;
181 	}
182 
183 	TAILQ_INIT(&cq);
184 
185 	ring = &sc->sc_ring[ringidx];
186 	bus_dmamap_sync(ring->rdr.dma.tag, ring->rdr.dma.map,
187 	    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
188 	bus_dmamap_sync(ring->cdr.dma.tag, ring->cdr.dma.map,
189 	    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
190 	bus_dmamap_sync(ring->dma_atok.tag, ring->dma_atok.map,
191 	    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
192 
193 	ncdescs = nrdescs = 0;
194 	for (i = 0; i < nreqs; i++) {
195 		req = safexcel_next_request(ring);
196 
197 		bus_dmamap_sync(req->ctx.tag, req->ctx.map,
198 		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
199 		bus_dmamap_sync(ring->data_dtag, req->dmap,
200 		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
201 
202 		ncdescs += req->cdescs;
203 		while (req->cdescs-- > 0) {
204 			cdesc = safexcel_cmd_descr_next(&ring->cdr);
205 			KASSERT(cdesc != NULL,
206 			    ("%s: missing control descriptor", __func__));
207 			if (req->cdescs == 0)
208 				KASSERT(cdesc->last_seg,
209 				    ("%s: chain is not terminated", __func__));
210 		}
211 		nrdescs += req->rdescs;
212 		while (req->rdescs-- > 0) {
213 			rdesc = safexcel_res_descr_next(&ring->rdr);
214 			error = rdesc->result_data.error_code;
215 			if (error != 0) {
216 				if (error == SAFEXCEL_RESULT_ERR_AUTH_FAILED &&
217 				    req->crp->crp_etype == 0) {
218 					req->crp->crp_etype = EBADMSG;
219 				} else {
220 					SAFEXCEL_DPRINTF(sc, 1,
221 					    "error code %#x\n", error);
222 					req->crp->crp_etype = EIO;
223 				}
224 			}
225 		}
226 
227 		TAILQ_INSERT_TAIL(&cq, req->crp, crp_next);
228 	}
229 
230 	mtx_lock(&ring->mtx);
231 	if (nreqs != 0) {
232 		KASSERT(ring->queued >= nreqs,
233 		    ("%s: request count underflow, %d queued %d completed",
234 		    __func__, ring->queued, nreqs));
235 		ring->queued -= nreqs;
236 
237 		SAFEXCEL_WRITE(sc,
238 		    SAFEXCEL_HIA_RDR(sc, ringidx) + SAFEXCEL_HIA_xDR_PROC_COUNT,
239 		    SAFEXCEL_xDR_PROC_xD_PKT(nreqs) |
240 		    (sc->sc_config.rd_offset * nrdescs * sizeof(uint32_t)));
241 		blocked = ring->blocked;
242 		ring->blocked = 0;
243 	}
244 out:
245 	if (ring->queued != 0) {
246 		SAFEXCEL_WRITE(sc,
247 		    SAFEXCEL_HIA_RDR(sc, ringidx) + SAFEXCEL_HIA_xDR_THRESH,
248 		    SAFEXCEL_HIA_CDR_THRESH_PKT_MODE | imin(ring->queued, 16));
249 	}
250 	mtx_unlock(&ring->mtx);
251 
252 	if (blocked)
253 		crypto_unblock(sc->sc_cid, blocked);
254 
255 	TAILQ_FOREACH_SAFE(crp, &cq, crp_next, tmp)
256 		crypto_done(crp);
257 }
258 
259 static void
260 safexcel_ring_intr(void *arg)
261 {
262 	struct safexcel_softc *sc;
263 	struct safexcel_intr_handle *ih;
264 	uint32_t status, stat;
265 	int ring;
266 	bool rdrpending;
267 
268 	ih = arg;
269 	sc = ih->sc;
270 	ring = ih->ring;
271 
272 	status = SAFEXCEL_READ(sc, SAFEXCEL_HIA_AIC_R(sc) +
273 	    SAFEXCEL_HIA_AIC_R_ENABLED_STAT(ring));
274 	/* CDR interrupts */
275 	if (status & SAFEXCEL_CDR_IRQ(ring)) {
276 		stat = SAFEXCEL_READ(sc,
277 		    SAFEXCEL_HIA_CDR(sc, ring) + SAFEXCEL_HIA_xDR_STAT);
278 		SAFEXCEL_WRITE(sc,
279 		    SAFEXCEL_HIA_CDR(sc, ring) + SAFEXCEL_HIA_xDR_STAT,
280 		    stat & SAFEXCEL_CDR_INTR_MASK);
281 	}
282 	/* RDR interrupts */
283 	rdrpending = false;
284 	if (status & SAFEXCEL_RDR_IRQ(ring)) {
285 		stat = SAFEXCEL_READ(sc,
286 		    SAFEXCEL_HIA_RDR(sc, ring) + SAFEXCEL_HIA_xDR_STAT);
287 		if ((stat & SAFEXCEL_xDR_ERR) == 0)
288 			rdrpending = true;
289 		SAFEXCEL_WRITE(sc,
290 		    SAFEXCEL_HIA_RDR(sc, ring) + SAFEXCEL_HIA_xDR_STAT,
291 		    stat & SAFEXCEL_RDR_INTR_MASK);
292 	}
293 	SAFEXCEL_WRITE(sc,
294 	    SAFEXCEL_HIA_AIC_R(sc) + SAFEXCEL_HIA_AIC_R_ACK(ring),
295 	    status);
296 
297 	if (rdrpending)
298 		safexcel_rdr_intr(sc, ring);
299 }
300 
301 static int
302 safexcel_configure(struct safexcel_softc *sc)
303 {
304 	uint32_t i, mask, pemask, reg;
305 	device_t dev;
306 
307 	if (sc->sc_type == 197) {
308 		sc->sc_offsets = eip197_regs_offset;
309 		pemask = SAFEXCEL_N_PES_MASK;
310 	} else {
311 		sc->sc_offsets = eip97_regs_offset;
312 		pemask = EIP97_N_PES_MASK;
313 	}
314 
315 	dev = sc->sc_dev;
316 
317 	/* Scan for valid ring interrupt controllers. */
318 	for (i = 0; i < SAFEXCEL_MAX_RING_AIC; i++) {
319 		reg = SAFEXCEL_READ(sc, SAFEXCEL_HIA_AIC_R(sc) +
320 		    SAFEXCEL_HIA_AIC_R_VERSION(i));
321 		if (SAFEXCEL_REG_LO16(reg) != EIP201_VERSION_LE)
322 			break;
323 	}
324 	sc->sc_config.aic_rings = i;
325 	if (sc->sc_config.aic_rings == 0)
326 		return (-1);
327 
328 	reg = SAFEXCEL_READ(sc, SAFEXCEL_HIA_AIC_G(sc) + SAFEXCEL_HIA_OPTIONS);
329 	/* Check for 64bit addressing. */
330 	if ((reg & SAFEXCEL_OPT_ADDR_64) == 0)
331 		return (-1);
332 	/* Check alignment constraints (which we do not support). */
333 	if (((reg & SAFEXCEL_OPT_TGT_ALIGN_MASK) >>
334 	    SAFEXCEL_OPT_TGT_ALIGN_OFFSET) != 0)
335 		return (-1);
336 
337 	sc->sc_config.hdw =
338 	    (reg & SAFEXCEL_xDR_HDW_MASK) >> SAFEXCEL_xDR_HDW_OFFSET;
339 	mask = (1 << sc->sc_config.hdw) - 1;
340 
341 	sc->sc_config.rings = reg & SAFEXCEL_N_RINGS_MASK;
342 	/* Limit the number of rings to the number of the AIC Rings. */
343 	sc->sc_config.rings = MIN(sc->sc_config.rings, sc->sc_config.aic_rings);
344 
345 	sc->sc_config.pes = (reg & pemask) >> SAFEXCEL_N_PES_OFFSET;
346 
347 	sc->sc_config.cd_size =
348 	    sizeof(struct safexcel_cmd_descr) / sizeof(uint32_t);
349 	sc->sc_config.cd_offset = (sc->sc_config.cd_size + mask) & ~mask;
350 
351 	sc->sc_config.rd_size =
352 	    sizeof(struct safexcel_res_descr) / sizeof(uint32_t);
353 	sc->sc_config.rd_offset = (sc->sc_config.rd_size + mask) & ~mask;
354 
355 	sc->sc_config.atok_offset =
356 	    (SAFEXCEL_MAX_ATOKENS * sizeof(struct safexcel_instr) + mask) &
357 	    ~mask;
358 
359 	return (0);
360 }
361 
362 static void
363 safexcel_init_hia_bus_access(struct safexcel_softc *sc)
364 {
365 	uint32_t version, val;
366 
367 	/* Determine endianness and configure byte swap. */
368 	version = SAFEXCEL_READ(sc,
369 	    SAFEXCEL_HIA_AIC(sc) + SAFEXCEL_HIA_VERSION);
370 	val = SAFEXCEL_READ(sc, SAFEXCEL_HIA_AIC(sc) + SAFEXCEL_HIA_MST_CTRL);
371 	if (SAFEXCEL_REG_HI16(version) == SAFEXCEL_HIA_VERSION_BE) {
372 		val = SAFEXCEL_READ(sc,
373 		    SAFEXCEL_HIA_AIC(sc) + SAFEXCEL_HIA_MST_CTRL);
374 		val = val ^ (SAFEXCEL_MST_CTRL_NO_BYTE_SWAP >> 24);
375 		SAFEXCEL_WRITE(sc,
376 		    SAFEXCEL_HIA_AIC(sc) + SAFEXCEL_HIA_MST_CTRL,
377 		    val);
378 	}
379 
380 	/* Configure wr/rd cache values. */
381 	SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_GEN_CFG(sc) + SAFEXCEL_HIA_MST_CTRL,
382 	    SAFEXCEL_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) |
383 	    SAFEXCEL_MST_CTRL_WD_CACHE(WR_CACHE_4BITS));
384 }
385 
386 static void
387 safexcel_disable_global_interrupts(struct safexcel_softc *sc)
388 {
389 	/* Disable and clear pending interrupts. */
390 	SAFEXCEL_WRITE(sc,
391 	    SAFEXCEL_HIA_AIC_G(sc) + SAFEXCEL_HIA_AIC_G_ENABLE_CTRL, 0);
392 	SAFEXCEL_WRITE(sc,
393 	    SAFEXCEL_HIA_AIC_G(sc) + SAFEXCEL_HIA_AIC_G_ACK,
394 	    SAFEXCEL_AIC_G_ACK_ALL_MASK);
395 }
396 
397 /*
398  * Configure the data fetch engine.  This component parses command descriptors
399  * and sets up DMA transfers from host memory to the corresponding processing
400  * engine.
401  */
402 static void
403 safexcel_configure_dfe_engine(struct safexcel_softc *sc, int pe)
404 {
405 	/* Reset all DFE threads. */
406 	SAFEXCEL_WRITE(sc,
407 	    SAFEXCEL_HIA_DFE_THR(sc) + SAFEXCEL_HIA_DFE_THR_CTRL(pe),
408 	    SAFEXCEL_DxE_THR_CTRL_RESET_PE);
409 
410 	/* Deassert the DFE reset. */
411 	SAFEXCEL_WRITE(sc,
412 	    SAFEXCEL_HIA_DFE_THR(sc) + SAFEXCEL_HIA_DFE_THR_CTRL(pe), 0);
413 
414 	/* DMA transfer size to use. */
415 	SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_DFE(sc) + SAFEXCEL_HIA_DFE_CFG(pe),
416 	    SAFEXCEL_HIA_DFE_CFG_DIS_DEBUG |
417 	    SAFEXCEL_HIA_DxE_CFG_MIN_DATA_SIZE(6) |
418 	    SAFEXCEL_HIA_DxE_CFG_MAX_DATA_SIZE(9) |
419 	    SAFEXCEL_HIA_DxE_CFG_MIN_CTRL_SIZE(6) |
420 	    SAFEXCEL_HIA_DxE_CFG_MAX_CTRL_SIZE(7) |
421 	    SAFEXCEL_HIA_DxE_CFG_DATA_CACHE_CTRL(RD_CACHE_3BITS) |
422 	    SAFEXCEL_HIA_DxE_CFG_CTRL_CACHE_CTRL(RD_CACHE_3BITS));
423 
424 	/* Configure the PE DMA transfer thresholds. */
425 	SAFEXCEL_WRITE(sc, SAFEXCEL_PE(sc) + SAFEXCEL_PE_IN_DBUF_THRES(pe),
426 	    SAFEXCEL_PE_IN_xBUF_THRES_MIN(6) |
427 	    SAFEXCEL_PE_IN_xBUF_THRES_MAX(9));
428 	SAFEXCEL_WRITE(sc, SAFEXCEL_PE(sc) + SAFEXCEL_PE_IN_TBUF_THRES(pe),
429 	    SAFEXCEL_PE_IN_xBUF_THRES_MIN(6) |
430 	    SAFEXCEL_PE_IN_xBUF_THRES_MAX(7));
431 }
432 
433 /*
434  * Configure the data store engine.  This component parses result descriptors
435  * and sets up DMA transfers from the processing engine to host memory.
436  */
437 static int
438 safexcel_configure_dse(struct safexcel_softc *sc, int pe)
439 {
440 	uint32_t val;
441 	int count;
442 
443 	/* Disable and reset all DSE threads. */
444 	SAFEXCEL_WRITE(sc,
445 	    SAFEXCEL_HIA_DSE_THR(sc) + SAFEXCEL_HIA_DSE_THR_CTRL(pe),
446 	    SAFEXCEL_DxE_THR_CTRL_RESET_PE);
447 
448 	/* Wait for a second for threads to go idle. */
449 	for (count = 0;;) {
450 		val = SAFEXCEL_READ(sc,
451 		    SAFEXCEL_HIA_DSE_THR(sc) + SAFEXCEL_HIA_DSE_THR_STAT(pe));
452 		if ((val & SAFEXCEL_DSE_THR_RDR_ID_MASK) ==
453 		    SAFEXCEL_DSE_THR_RDR_ID_MASK)
454 			break;
455 		if (count++ > 10000) {
456 			device_printf(sc->sc_dev, "DSE reset timeout\n");
457 			return (-1);
458 		}
459 		DELAY(100);
460 	}
461 
462 	/* Exit the reset state. */
463 	SAFEXCEL_WRITE(sc,
464 	    SAFEXCEL_HIA_DSE_THR(sc) + SAFEXCEL_HIA_DSE_THR_CTRL(pe), 0);
465 
466 	/* DMA transfer size to use */
467 	SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_DSE(sc) + SAFEXCEL_HIA_DSE_CFG(pe),
468 	    SAFEXCEL_HIA_DSE_CFG_DIS_DEBUG |
469 	    SAFEXCEL_HIA_DxE_CFG_MIN_DATA_SIZE(7) |
470 	    SAFEXCEL_HIA_DxE_CFG_MAX_DATA_SIZE(8) |
471 	    SAFEXCEL_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS) |
472 	    SAFEXCEL_HIA_DSE_CFG_ALLWAYS_BUFFERABLE);
473 
474 	/* Configure the procesing engine thresholds */
475 	SAFEXCEL_WRITE(sc,
476 	    SAFEXCEL_PE(sc) + SAFEXCEL_PE_OUT_DBUF_THRES(pe),
477 	    SAFEXCEL_PE_OUT_DBUF_THRES_MIN(7) |
478 	    SAFEXCEL_PE_OUT_DBUF_THRES_MAX(8));
479 
480 	return (0);
481 }
482 
483 static void
484 safexcel_hw_prepare_rings(struct safexcel_softc *sc)
485 {
486 	int i;
487 
488 	for (i = 0; i < sc->sc_config.rings; i++) {
489 		/*
490 		 * Command descriptors.
491 		 */
492 
493 		/* Clear interrupts for this ring. */
494 		SAFEXCEL_WRITE(sc,
495 		    SAFEXCEL_HIA_AIC_R(sc) + SAFEXCEL_HIA_AIC_R_ENABLE_CLR(i),
496 		    SAFEXCEL_HIA_AIC_R_ENABLE_CLR_ALL_MASK);
497 
498 		/* Disable external triggering. */
499 		SAFEXCEL_WRITE(sc,
500 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_CFG, 0);
501 
502 		/* Clear the pending prepared counter. */
503 		SAFEXCEL_WRITE(sc,
504 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_COUNT,
505 		    SAFEXCEL_xDR_PREP_CLR_COUNT);
506 
507 		/* Clear the pending processed counter. */
508 		SAFEXCEL_WRITE(sc,
509 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_COUNT,
510 		    SAFEXCEL_xDR_PROC_CLR_COUNT);
511 
512 		SAFEXCEL_WRITE(sc,
513 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_PNTR, 0);
514 		SAFEXCEL_WRITE(sc,
515 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_PNTR, 0);
516 
517 		SAFEXCEL_WRITE(sc,
518 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_RING_SIZE,
519 		    SAFEXCEL_RING_SIZE * sc->sc_config.cd_offset *
520 		    sizeof(uint32_t));
521 
522 		/*
523 		 * Result descriptors.
524 		 */
525 
526 		/* Disable external triggering. */
527 		SAFEXCEL_WRITE(sc,
528 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_CFG, 0);
529 
530 		/* Clear the pending prepared counter. */
531 		SAFEXCEL_WRITE(sc,
532 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_COUNT,
533 		    SAFEXCEL_xDR_PREP_CLR_COUNT);
534 
535 		/* Clear the pending processed counter. */
536 		SAFEXCEL_WRITE(sc,
537 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_COUNT,
538 		    SAFEXCEL_xDR_PROC_CLR_COUNT);
539 
540 		SAFEXCEL_WRITE(sc,
541 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_PNTR, 0);
542 		SAFEXCEL_WRITE(sc,
543 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_PNTR, 0);
544 
545 		/* Ring size. */
546 		SAFEXCEL_WRITE(sc,
547 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_RING_SIZE,
548 		    SAFEXCEL_RING_SIZE * sc->sc_config.rd_offset *
549 		    sizeof(uint32_t));
550 	}
551 }
552 
553 static void
554 safexcel_hw_setup_rings(struct safexcel_softc *sc)
555 {
556 	struct safexcel_ring *ring;
557 	uint32_t cd_size_rnd, mask, rd_size_rnd, val;
558 	int i;
559 
560 	mask = (1 << sc->sc_config.hdw) - 1;
561 	cd_size_rnd = (sc->sc_config.cd_size + mask) >> sc->sc_config.hdw;
562 	val = (sizeof(struct safexcel_res_descr) -
563 	    sizeof(struct safexcel_res_data)) / sizeof(uint32_t);
564 	rd_size_rnd = (val + mask) >> sc->sc_config.hdw;
565 
566 	for (i = 0; i < sc->sc_config.rings; i++) {
567 		ring = &sc->sc_ring[i];
568 
569 		/*
570 		 * Command descriptors.
571 		 */
572 
573 		/* Ring base address. */
574 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_CDR(sc, i) +
575 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_LO,
576 		    SAFEXCEL_ADDR_LO(ring->cdr.dma.paddr));
577 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_CDR(sc, i) +
578 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_HI,
579 		    SAFEXCEL_ADDR_HI(ring->cdr.dma.paddr));
580 
581 		SAFEXCEL_WRITE(sc,
582 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_DESC_SIZE,
583 		    SAFEXCEL_xDR_DESC_MODE_64BIT | SAFEXCEL_CDR_DESC_MODE_ADCP |
584 		    (sc->sc_config.cd_offset << SAFEXCEL_xDR_DESC_xD_OFFSET) |
585 		    sc->sc_config.cd_size);
586 
587 		SAFEXCEL_WRITE(sc,
588 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_CFG,
589 		    ((SAFEXCEL_FETCH_COUNT * (cd_size_rnd << sc->sc_config.hdw)) <<
590 		      SAFEXCEL_xDR_xD_FETCH_THRESH) |
591 		    (SAFEXCEL_FETCH_COUNT * sc->sc_config.cd_offset));
592 
593 		/* Configure DMA tx control. */
594 		SAFEXCEL_WRITE(sc,
595 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_DMA_CFG,
596 		    SAFEXCEL_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS) |
597 		    SAFEXCEL_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS));
598 
599 		/* Clear any pending interrupt. */
600 		SAFEXCEL_WRITE(sc,
601 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_STAT,
602 		    SAFEXCEL_CDR_INTR_MASK);
603 
604 		/*
605 		 * Result descriptors.
606 		 */
607 
608 		/* Ring base address. */
609 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_RDR(sc, i) +
610 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_LO,
611 		    SAFEXCEL_ADDR_LO(ring->rdr.dma.paddr));
612 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_RDR(sc, i) +
613 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_HI,
614 		    SAFEXCEL_ADDR_HI(ring->rdr.dma.paddr));
615 
616 		SAFEXCEL_WRITE(sc,
617 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_DESC_SIZE,
618 		    SAFEXCEL_xDR_DESC_MODE_64BIT |
619 		    (sc->sc_config.rd_offset << SAFEXCEL_xDR_DESC_xD_OFFSET) |
620 		    sc->sc_config.rd_size);
621 
622 		SAFEXCEL_WRITE(sc,
623 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_CFG,
624 		    ((SAFEXCEL_FETCH_COUNT * (rd_size_rnd << sc->sc_config.hdw)) <<
625 		    SAFEXCEL_xDR_xD_FETCH_THRESH) |
626 		    (SAFEXCEL_FETCH_COUNT * sc->sc_config.rd_offset));
627 
628 		/* Configure DMA tx control. */
629 		SAFEXCEL_WRITE(sc,
630 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_DMA_CFG,
631 		    SAFEXCEL_HIA_xDR_CFG_WR_CACHE(WR_CACHE_3BITS) |
632 		    SAFEXCEL_HIA_xDR_CFG_RD_CACHE(RD_CACHE_3BITS) |
633 		    SAFEXCEL_HIA_xDR_WR_RES_BUF | SAFEXCEL_HIA_xDR_WR_CTRL_BUF);
634 
635 		/* Clear any pending interrupt. */
636 		SAFEXCEL_WRITE(sc,
637 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_STAT,
638 		    SAFEXCEL_RDR_INTR_MASK);
639 
640 		/* Enable ring interrupt. */
641 		SAFEXCEL_WRITE(sc,
642 		    SAFEXCEL_HIA_AIC_R(sc) + SAFEXCEL_HIA_AIC_R_ENABLE_CTRL(i),
643 		    SAFEXCEL_RDR_IRQ(i));
644 	}
645 }
646 
647 /* Reset the command and result descriptor rings. */
648 static void
649 safexcel_hw_reset_rings(struct safexcel_softc *sc)
650 {
651 	int i;
652 
653 	for (i = 0; i < sc->sc_config.rings; i++) {
654 		/*
655 		 * Result descriptor ring operations.
656 		 */
657 
658 		/* Reset ring base address. */
659 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_RDR(sc, i) +
660 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_LO, 0);
661 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_RDR(sc, i) +
662 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_HI, 0);
663 
664 		/* Clear the pending prepared counter. */
665 		SAFEXCEL_WRITE(sc,
666 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_COUNT,
667 		    SAFEXCEL_xDR_PREP_CLR_COUNT);
668 
669 		/* Clear the pending processed counter. */
670 		SAFEXCEL_WRITE(sc,
671 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_COUNT,
672 		    SAFEXCEL_xDR_PROC_CLR_COUNT);
673 
674 		SAFEXCEL_WRITE(sc,
675 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_PNTR, 0);
676 		SAFEXCEL_WRITE(sc,
677 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_PNTR, 0);
678 
679 		SAFEXCEL_WRITE(sc,
680 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_RING_SIZE, 0);
681 
682 		/* Clear any pending interrupt. */
683 		SAFEXCEL_WRITE(sc,
684 		    SAFEXCEL_HIA_RDR(sc, i) + SAFEXCEL_HIA_xDR_STAT,
685 		    SAFEXCEL_RDR_INTR_MASK);
686 
687 		/* Disable ring interrupt. */
688 		SAFEXCEL_WRITE(sc,
689 		    SAFEXCEL_HIA_AIC_R(sc) + SAFEXCEL_HIA_AIC_R_ENABLE_CLR(i),
690 		    SAFEXCEL_RDR_IRQ(i));
691 
692 		/*
693 		 * Command descriptor ring operations.
694 		 */
695 
696 		/* Reset ring base address. */
697 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_CDR(sc, i) +
698 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_LO, 0);
699 		SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_CDR(sc, i) +
700 		    SAFEXCEL_HIA_xDR_RING_BASE_ADDR_HI, 0);
701 
702 		/* Clear the pending prepared counter. */
703 		SAFEXCEL_WRITE(sc,
704 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_COUNT,
705 		    SAFEXCEL_xDR_PREP_CLR_COUNT);
706 
707 		/* Clear the pending processed counter. */
708 		SAFEXCEL_WRITE(sc,
709 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_COUNT,
710 		    SAFEXCEL_xDR_PROC_CLR_COUNT);
711 
712 		SAFEXCEL_WRITE(sc,
713 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PREP_PNTR, 0);
714 		SAFEXCEL_WRITE(sc,
715 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_PROC_PNTR, 0);
716 
717 		SAFEXCEL_WRITE(sc,
718 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_RING_SIZE, 0);
719 
720 		/* Clear any pending interrupt. */
721 		SAFEXCEL_WRITE(sc,
722 		    SAFEXCEL_HIA_CDR(sc, i) + SAFEXCEL_HIA_xDR_STAT,
723 		    SAFEXCEL_CDR_INTR_MASK);
724 	}
725 }
726 
727 static void
728 safexcel_enable_pe_engine(struct safexcel_softc *sc, int pe)
729 {
730 	int i, ring_mask;
731 
732 	for (ring_mask = 0, i = 0; i < sc->sc_config.rings; i++) {
733 		ring_mask <<= 1;
734 		ring_mask |= 1;
735 	}
736 
737 	/* Enable command descriptor rings. */
738 	SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_DFE_THR(sc) + SAFEXCEL_HIA_DFE_THR_CTRL(pe),
739 	    SAFEXCEL_DxE_THR_CTRL_EN | ring_mask);
740 
741 	/* Enable result descriptor rings. */
742 	SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_DSE_THR(sc) + SAFEXCEL_HIA_DSE_THR_CTRL(pe),
743 	    SAFEXCEL_DxE_THR_CTRL_EN | ring_mask);
744 
745 	/* Clear any HIA interrupt. */
746 	SAFEXCEL_WRITE(sc, SAFEXCEL_HIA_AIC_G(sc) + SAFEXCEL_HIA_AIC_G_ACK,
747 	    SAFEXCEL_AIC_G_ACK_HIA_MASK);
748 }
749 
750 static void
751 safexcel_execute(struct safexcel_softc *sc, struct safexcel_ring *ring,
752     struct safexcel_request *req, int hint)
753 {
754 	int ringidx, ncdesc, nrdesc;
755 	bool busy;
756 
757 	mtx_assert(&ring->mtx, MA_OWNED);
758 
759 	if ((hint & CRYPTO_HINT_MORE) != 0) {
760 		ring->pending++;
761 		ring->pending_cdesc += req->cdescs;
762 		ring->pending_rdesc += req->rdescs;
763 		return;
764 	}
765 
766 	ringidx = req->ringidx;
767 
768 	busy = ring->queued != 0;
769 	ncdesc = ring->pending_cdesc + req->cdescs;
770 	nrdesc = ring->pending_rdesc + req->rdescs;
771 	ring->queued += ring->pending + 1;
772 
773 	if (!busy) {
774 		SAFEXCEL_WRITE(sc,
775 		    SAFEXCEL_HIA_RDR(sc, ringidx) + SAFEXCEL_HIA_xDR_THRESH,
776 		    SAFEXCEL_HIA_CDR_THRESH_PKT_MODE | ring->queued);
777 	}
778 	SAFEXCEL_WRITE(sc,
779 	    SAFEXCEL_HIA_RDR(sc, ringidx) + SAFEXCEL_HIA_xDR_PREP_COUNT,
780 	    nrdesc * sc->sc_config.rd_offset * sizeof(uint32_t));
781 	SAFEXCEL_WRITE(sc,
782 	    SAFEXCEL_HIA_CDR(sc, ringidx) + SAFEXCEL_HIA_xDR_PREP_COUNT,
783 	    ncdesc * sc->sc_config.cd_offset * sizeof(uint32_t));
784 
785 	ring->pending = ring->pending_cdesc = ring->pending_rdesc = 0;
786 }
787 
788 static void
789 safexcel_init_rings(struct safexcel_softc *sc)
790 {
791 	struct safexcel_cmd_descr *cdesc;
792 	struct safexcel_ring *ring;
793 	uint64_t atok;
794 	int i, j;
795 
796 	for (i = 0; i < sc->sc_config.rings; i++) {
797 		ring = &sc->sc_ring[i];
798 
799 		snprintf(ring->lockname, sizeof(ring->lockname),
800 		    "safexcel_ring%d", i);
801 		mtx_init(&ring->mtx, ring->lockname, NULL, MTX_DEF);
802 
803 		ring->pending = ring->pending_cdesc = ring->pending_rdesc = 0;
804 		ring->queued = 0;
805 		ring->cdr.read = ring->cdr.write = 0;
806 		ring->rdr.read = ring->rdr.write = 0;
807 		for (j = 0; j < SAFEXCEL_RING_SIZE; j++) {
808 			cdesc = &ring->cdr.desc[j];
809 			atok = ring->dma_atok.paddr +
810 			    sc->sc_config.atok_offset * j;
811 			cdesc->atok_lo = SAFEXCEL_ADDR_LO(atok);
812 			cdesc->atok_hi = SAFEXCEL_ADDR_HI(atok);
813 		}
814 	}
815 }
816 
817 static void
818 safexcel_dma_alloc_mem_cb(void *arg, bus_dma_segment_t *segs, int nseg,
819     int error)
820 {
821 	struct safexcel_dma_mem *sdm;
822 
823 	if (error != 0)
824 		return;
825 
826 	KASSERT(nseg == 1, ("%s: nsegs is %d", __func__, nseg));
827 	sdm = arg;
828 	sdm->paddr = segs->ds_addr;
829 }
830 
831 static int
832 safexcel_dma_alloc_mem(struct safexcel_softc *sc, struct safexcel_dma_mem *sdm,
833     bus_size_t size)
834 {
835 	int error;
836 
837 	KASSERT(sdm->vaddr == NULL,
838 	    ("%s: DMA memory descriptor in use.", __func__));
839 
840 	error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), /* parent */
841 	    PAGE_SIZE, 0,		/* alignment, boundary */
842 	    BUS_SPACE_MAXADDR_32BIT,	/* lowaddr */
843 	    BUS_SPACE_MAXADDR,		/* highaddr */
844 	    NULL, NULL,			/* filtfunc, filtfuncarg */
845 	    size, 1,			/* maxsize, nsegments */
846 	    size, BUS_DMA_COHERENT,	/* maxsegsz, flags */
847 	    NULL, NULL,			/* lockfunc, lockfuncarg */
848 	    &sdm->tag);			/* dmat */
849 	if (error != 0) {
850 		device_printf(sc->sc_dev,
851 		    "failed to allocate busdma tag, error %d\n", error);
852 		goto err1;
853 	}
854 
855 	error = bus_dmamem_alloc(sdm->tag, (void **)&sdm->vaddr,
856 	    BUS_DMA_WAITOK | BUS_DMA_ZERO | BUS_DMA_COHERENT, &sdm->map);
857 	if (error != 0) {
858 		device_printf(sc->sc_dev,
859 		    "failed to allocate DMA safe memory, error %d\n", error);
860 		goto err2;
861 	}
862 
863 	error = bus_dmamap_load(sdm->tag, sdm->map, sdm->vaddr, size,
864 	    safexcel_dma_alloc_mem_cb, sdm, BUS_DMA_NOWAIT);
865 	if (error != 0) {
866 		device_printf(sc->sc_dev,
867 		    "cannot get address of the DMA memory, error %d\n", error);
868 		goto err3;
869 	}
870 
871 	return (0);
872 err3:
873 	bus_dmamem_free(sdm->tag, sdm->vaddr, sdm->map);
874 err2:
875 	bus_dma_tag_destroy(sdm->tag);
876 err1:
877 	sdm->vaddr = NULL;
878 
879 	return (error);
880 }
881 
882 static void
883 safexcel_dma_free_mem(struct safexcel_dma_mem *sdm)
884 {
885 	bus_dmamap_unload(sdm->tag, sdm->map);
886 	bus_dmamem_free(sdm->tag, sdm->vaddr, sdm->map);
887 	bus_dma_tag_destroy(sdm->tag);
888 }
889 
890 static void
891 safexcel_dma_free_rings(struct safexcel_softc *sc)
892 {
893 	struct safexcel_ring *ring;
894 	int i;
895 
896 	for (i = 0; i < sc->sc_config.rings; i++) {
897 		ring = &sc->sc_ring[i];
898 		safexcel_dma_free_mem(&ring->cdr.dma);
899 		safexcel_dma_free_mem(&ring->dma_atok);
900 		safexcel_dma_free_mem(&ring->rdr.dma);
901 		bus_dma_tag_destroy(ring->data_dtag);
902 		mtx_destroy(&ring->mtx);
903 	}
904 }
905 
906 static int
907 safexcel_dma_init(struct safexcel_softc *sc)
908 {
909 	struct safexcel_ring *ring;
910 	bus_size_t size;
911 	int error, i;
912 
913 	for (i = 0; i < sc->sc_config.rings; i++) {
914 		ring = &sc->sc_ring[i];
915 
916 		error = bus_dma_tag_create(
917 		    bus_get_dma_tag(sc->sc_dev),/* parent */
918 		    1, 0,			/* alignment, boundary */
919 		    BUS_SPACE_MAXADDR_32BIT,	/* lowaddr */
920 		    BUS_SPACE_MAXADDR,		/* highaddr */
921 		    NULL, NULL,			/* filtfunc, filtfuncarg */
922 		    SAFEXCEL_MAX_REQUEST_SIZE,	/* maxsize */
923 		    SAFEXCEL_MAX_FRAGMENTS,	/* nsegments */
924 		    SAFEXCEL_MAX_REQUEST_SIZE,	/* maxsegsz */
925 		    BUS_DMA_COHERENT,		/* flags */
926 		    NULL, NULL,			/* lockfunc, lockfuncarg */
927 		    &ring->data_dtag);		/* dmat */
928 		if (error != 0) {
929 			device_printf(sc->sc_dev,
930 			    "bus_dma_tag_create main failed; error %d\n", error);
931 			return (error);
932 		}
933 
934 		size = sizeof(uint32_t) * sc->sc_config.cd_offset *
935 		    SAFEXCEL_RING_SIZE;
936 		error = safexcel_dma_alloc_mem(sc, &ring->cdr.dma, size);
937 		if (error != 0) {
938 			device_printf(sc->sc_dev,
939 			    "failed to allocate CDR DMA memory, error %d\n",
940 			    error);
941 			goto err;
942 		}
943 		ring->cdr.desc =
944 		    (struct safexcel_cmd_descr *)ring->cdr.dma.vaddr;
945 
946 		/* Allocate additional CDR token memory. */
947 		size = (bus_size_t)sc->sc_config.atok_offset *
948 		    SAFEXCEL_RING_SIZE;
949 		error = safexcel_dma_alloc_mem(sc, &ring->dma_atok, size);
950 		if (error != 0) {
951 			device_printf(sc->sc_dev,
952 			    "failed to allocate atoken DMA memory, error %d\n",
953 			    error);
954 			goto err;
955 		}
956 
957 		size = sizeof(uint32_t) * sc->sc_config.rd_offset *
958 		    SAFEXCEL_RING_SIZE;
959 		error = safexcel_dma_alloc_mem(sc, &ring->rdr.dma, size);
960 		if (error) {
961 			device_printf(sc->sc_dev,
962 			    "failed to allocate RDR DMA memory, error %d\n",
963 			    error);
964 			goto err;
965 		}
966 		ring->rdr.desc =
967 		    (struct safexcel_res_descr *)ring->rdr.dma.vaddr;
968 	}
969 
970 	return (0);
971 err:
972 	safexcel_dma_free_rings(sc);
973 	return (error);
974 }
975 
976 static void
977 safexcel_deinit_hw(struct safexcel_softc *sc)
978 {
979 	safexcel_hw_reset_rings(sc);
980 	safexcel_dma_free_rings(sc);
981 }
982 
983 static int
984 safexcel_init_hw(struct safexcel_softc *sc)
985 {
986 	int pe;
987 
988 	/* 23.3.7 Initialization */
989 	if (safexcel_configure(sc) != 0)
990 		return (EINVAL);
991 
992 	if (safexcel_dma_init(sc) != 0)
993 		return (ENOMEM);
994 
995 	safexcel_init_rings(sc);
996 
997 	safexcel_init_hia_bus_access(sc);
998 
999 	/* 23.3.7.2 Disable EIP-97 global Interrupts */
1000 	safexcel_disable_global_interrupts(sc);
1001 
1002 	for (pe = 0; pe < sc->sc_config.pes; pe++) {
1003 		/* 23.3.7.3 Configure Data Fetch Engine */
1004 		safexcel_configure_dfe_engine(sc, pe);
1005 
1006 		/* 23.3.7.4 Configure Data Store Engine */
1007 		if (safexcel_configure_dse(sc, pe)) {
1008 			safexcel_deinit_hw(sc);
1009 			return (-1);
1010 		}
1011 
1012 		/* 23.3.7.5 1. Protocol enables */
1013 		SAFEXCEL_WRITE(sc,
1014 		    SAFEXCEL_PE(sc) + SAFEXCEL_PE_EIP96_FUNCTION_EN(pe),
1015 		    0xffffffff);
1016 		SAFEXCEL_WRITE(sc,
1017 		    SAFEXCEL_PE(sc) + SAFEXCEL_PE_EIP96_FUNCTION2_EN(pe),
1018 		    0xffffffff);
1019 	}
1020 
1021 	safexcel_hw_prepare_rings(sc);
1022 
1023 	/* 23.3.7.5 Configure the Processing Engine(s). */
1024 	for (pe = 0; pe < sc->sc_config.pes; pe++)
1025 		safexcel_enable_pe_engine(sc, pe);
1026 
1027 	safexcel_hw_setup_rings(sc);
1028 
1029 	return (0);
1030 }
1031 
1032 static int
1033 safexcel_setup_dev_interrupts(struct safexcel_softc *sc)
1034 {
1035 	int error, i, j;
1036 
1037 	for (i = 0; i < SAFEXCEL_MAX_RINGS && sc->sc_intr[i] != NULL; i++) {
1038 		sc->sc_ih[i].sc = sc;
1039 		sc->sc_ih[i].ring = i;
1040 
1041 		if (bus_setup_intr(sc->sc_dev, sc->sc_intr[i],
1042 		    INTR_TYPE_NET | INTR_MPSAFE, NULL, safexcel_ring_intr,
1043 		    &sc->sc_ih[i], &sc->sc_ih[i].handle)) {
1044 			device_printf(sc->sc_dev,
1045 			    "couldn't setup interrupt %d\n", i);
1046 			goto err;
1047 		}
1048 
1049 		error = bus_bind_intr(sc->sc_dev, sc->sc_intr[i], i % mp_ncpus);
1050 		if (error != 0)
1051 			device_printf(sc->sc_dev,
1052 			    "failed to bind ring %d\n", error);
1053 	}
1054 
1055 	return (0);
1056 
1057 err:
1058 	for (j = 0; j < i; j++)
1059 		bus_teardown_intr(sc->sc_dev, sc->sc_intr[j],
1060 		    sc->sc_ih[j].handle);
1061 
1062 	return (ENXIO);
1063 }
1064 
1065 static void
1066 safexcel_teardown_dev_interrupts(struct safexcel_softc *sc)
1067 {
1068 	int i;
1069 
1070 	for (i = 0; i < SAFEXCEL_MAX_RINGS; i++)
1071 		bus_teardown_intr(sc->sc_dev, sc->sc_intr[i],
1072 		    sc->sc_ih[i].handle);
1073 }
1074 
1075 static int
1076 safexcel_alloc_dev_resources(struct safexcel_softc *sc)
1077 {
1078 	char name[16];
1079 	device_t dev;
1080 	phandle_t node;
1081 	int error, i, rid;
1082 
1083 	dev = sc->sc_dev;
1084 	node = ofw_bus_get_node(dev);
1085 
1086 	rid = 0;
1087 	sc->sc_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
1088 	    RF_ACTIVE);
1089 	if (sc->sc_res == NULL) {
1090 		device_printf(dev, "couldn't allocate memory resources\n");
1091 		return (ENXIO);
1092 	}
1093 
1094 	for (i = 0; i < SAFEXCEL_MAX_RINGS; i++) {
1095 		(void)snprintf(name, sizeof(name), "ring%d", i);
1096 		error = ofw_bus_find_string_index(node, "interrupt-names", name,
1097 		    &rid);
1098 		if (error != 0)
1099 			break;
1100 
1101 		sc->sc_intr[i] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
1102 		    RF_ACTIVE | RF_SHAREABLE);
1103 		if (sc->sc_intr[i] == NULL) {
1104 			error = ENXIO;
1105 			goto out;
1106 		}
1107 	}
1108 	if (i == 0) {
1109 		device_printf(dev, "couldn't allocate interrupt resources\n");
1110 		error = ENXIO;
1111 		goto out;
1112 	}
1113 
1114 	return (0);
1115 
1116 out:
1117 	for (i = 0; i < SAFEXCEL_MAX_RINGS && sc->sc_intr[i] != NULL; i++)
1118 		bus_release_resource(dev, SYS_RES_IRQ,
1119 		    rman_get_rid(sc->sc_intr[i]), sc->sc_intr[i]);
1120 	bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->sc_res),
1121 	    sc->sc_res);
1122 	return (error);
1123 }
1124 
1125 static void
1126 safexcel_free_dev_resources(struct safexcel_softc *sc)
1127 {
1128 	int i;
1129 
1130 	for (i = 0; i < SAFEXCEL_MAX_RINGS && sc->sc_intr[i] != NULL; i++)
1131 		bus_release_resource(sc->sc_dev, SYS_RES_IRQ,
1132 		    rman_get_rid(sc->sc_intr[i]), sc->sc_intr[i]);
1133 	if (sc->sc_res != NULL)
1134 		bus_release_resource(sc->sc_dev, SYS_RES_MEMORY,
1135 		    rman_get_rid(sc->sc_res), sc->sc_res);
1136 }
1137 
1138 static int
1139 safexcel_probe(device_t dev)
1140 {
1141 	struct safexcel_softc *sc;
1142 
1143 	if (!ofw_bus_status_okay(dev))
1144 		return (ENXIO);
1145 
1146 	sc = device_get_softc(dev);
1147 	sc->sc_type = ofw_bus_search_compatible(dev, safexcel_compat)->ocd_data;
1148 	if (sc->sc_type == 0)
1149 		return (ENXIO);
1150 
1151 	device_set_desc(dev, "SafeXcel EIP-97 crypto accelerator");
1152 
1153 	return (BUS_PROBE_DEFAULT);
1154 }
1155 
1156 static int
1157 safexcel_attach(device_t dev)
1158 {
1159 	struct sysctl_ctx_list *ctx;
1160 	struct sysctl_oid *oid;
1161 	struct sysctl_oid_list *children;
1162 	struct safexcel_softc *sc;
1163 	struct safexcel_request *req;
1164 	struct safexcel_ring *ring;
1165 	int i, j, ringidx;
1166 
1167 	sc = device_get_softc(dev);
1168 	sc->sc_dev = dev;
1169 	sc->sc_cid = -1;
1170 
1171 	if (safexcel_alloc_dev_resources(sc))
1172 		goto err;
1173 
1174 	if (safexcel_setup_dev_interrupts(sc))
1175 		goto err1;
1176 
1177 	if (safexcel_init_hw(sc))
1178 		goto err2;
1179 
1180 	for (ringidx = 0; ringidx < sc->sc_config.rings; ringidx++) {
1181 		ring = &sc->sc_ring[ringidx];
1182 
1183 		ring->cmd_data = sglist_alloc(SAFEXCEL_MAX_FRAGMENTS, M_WAITOK);
1184 		ring->res_data = sglist_alloc(SAFEXCEL_MAX_FRAGMENTS, M_WAITOK);
1185 
1186 		for (i = 0; i < SAFEXCEL_RING_SIZE; i++) {
1187 			req = &ring->requests[i];
1188 			req->sc = sc;
1189 			req->ringidx = ringidx;
1190 			if (bus_dmamap_create(ring->data_dtag,
1191 			    BUS_DMA_COHERENT, &req->dmap) != 0) {
1192 				for (j = 0; j < i; j++)
1193 					bus_dmamap_destroy(ring->data_dtag,
1194 					    ring->requests[j].dmap);
1195 				goto err2;
1196 			}
1197 			if (safexcel_dma_alloc_mem(sc, &req->ctx,
1198 			    sizeof(struct safexcel_context_record)) != 0) {
1199 				for (j = 0; j < i; j++) {
1200 					bus_dmamap_destroy(ring->data_dtag,
1201 					    ring->requests[j].dmap);
1202 					safexcel_dma_free_mem(
1203 					    &ring->requests[j].ctx);
1204 				}
1205 				goto err2;
1206 			}
1207 		}
1208 	}
1209 
1210 	ctx = device_get_sysctl_ctx(dev);
1211 	SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
1212 	    OID_AUTO, "debug", CTLFLAG_RWTUN, &sc->sc_debug, 0,
1213 	    "Debug message verbosity");
1214 
1215 	oid = device_get_sysctl_tree(sc->sc_dev);
1216 	children = SYSCTL_CHILDREN(oid);
1217 	oid = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "stats",
1218 	    CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "statistics");
1219 	children = SYSCTL_CHILDREN(oid);
1220 
1221 	sc->sc_req_alloc_failures = counter_u64_alloc(M_WAITOK);
1222 	SYSCTL_ADD_COUNTER_U64(ctx, children, OID_AUTO, "req_alloc_failures",
1223 	    CTLFLAG_RD, &sc->sc_req_alloc_failures,
1224 	    "Number of request allocation failures");
1225 	sc->sc_cdesc_alloc_failures = counter_u64_alloc(M_WAITOK);
1226 	SYSCTL_ADD_COUNTER_U64(ctx, children, OID_AUTO, "cdesc_alloc_failures",
1227 	    CTLFLAG_RD, &sc->sc_cdesc_alloc_failures,
1228 	    "Number of command descriptor ring overflows");
1229 	sc->sc_rdesc_alloc_failures = counter_u64_alloc(M_WAITOK);
1230 	SYSCTL_ADD_COUNTER_U64(ctx, children, OID_AUTO, "rdesc_alloc_failures",
1231 	    CTLFLAG_RD, &sc->sc_rdesc_alloc_failures,
1232 	    "Number of result descriptor ring overflows");
1233 
1234 	sc->sc_cid = crypto_get_driverid(dev, sizeof(struct safexcel_session),
1235 	    CRYPTOCAP_F_HARDWARE);
1236 	if (sc->sc_cid < 0)
1237 		goto err2;
1238 
1239 	return (0);
1240 
1241 err2:
1242 	safexcel_teardown_dev_interrupts(sc);
1243 err1:
1244 	safexcel_free_dev_resources(sc);
1245 err:
1246 	return (ENXIO);
1247 }
1248 
1249 static int
1250 safexcel_detach(device_t dev)
1251 {
1252 	struct safexcel_ring *ring;
1253 	struct safexcel_softc *sc;
1254 	int i, ringidx;
1255 
1256 	sc = device_get_softc(dev);
1257 
1258 	if (sc->sc_cid >= 0)
1259 		crypto_unregister_all(sc->sc_cid);
1260 
1261 	counter_u64_free(sc->sc_req_alloc_failures);
1262 	counter_u64_free(sc->sc_cdesc_alloc_failures);
1263 	counter_u64_free(sc->sc_rdesc_alloc_failures);
1264 
1265 	for (ringidx = 0; ringidx < sc->sc_config.rings; ringidx++) {
1266 		ring = &sc->sc_ring[ringidx];
1267 		for (i = 0; i < SAFEXCEL_RING_SIZE; i++) {
1268 			bus_dmamap_destroy(ring->data_dtag,
1269 			    ring->requests[i].dmap);
1270 			safexcel_dma_free_mem(&ring->requests[i].ctx);
1271 		}
1272 		sglist_free(ring->cmd_data);
1273 		sglist_free(ring->res_data);
1274 	}
1275 	safexcel_deinit_hw(sc);
1276 	safexcel_teardown_dev_interrupts(sc);
1277 	safexcel_free_dev_resources(sc);
1278 
1279 	return (0);
1280 }
1281 
1282 /*
1283  * Pre-compute the hash key used in GHASH, which is a block of zeroes encrypted
1284  * using the cipher key.
1285  */
1286 static void
1287 safexcel_setkey_ghash(const uint8_t *key, int klen, uint32_t *hashkey)
1288 {
1289 	uint32_t ks[4 * (RIJNDAEL_MAXNR + 1)];
1290 	uint8_t zeros[AES_BLOCK_LEN];
1291 	int i, rounds;
1292 
1293 	memset(zeros, 0, sizeof(zeros));
1294 
1295 	rounds = rijndaelKeySetupEnc(ks, key, klen * NBBY);
1296 	rijndaelEncrypt(ks, rounds, zeros, (uint8_t *)hashkey);
1297 	for (i = 0; i < GMAC_BLOCK_LEN / sizeof(uint32_t); i++)
1298 		hashkey[i] = htobe32(hashkey[i]);
1299 
1300 	explicit_bzero(ks, sizeof(ks));
1301 }
1302 
1303 /*
1304  * Pre-compute the combined CBC-MAC key, which consists of three keys K1, K2, K3
1305  * in the hardware implementation.  K1 is the cipher key and comes last in the
1306  * buffer since K2 and K3 have a fixed size of AES_BLOCK_LEN.  For now XCBC-MAC
1307  * is not implemented so K2 and K3 are fixed.
1308  */
1309 static void
1310 safexcel_setkey_xcbcmac(const uint8_t *key, int klen, uint32_t *hashkey)
1311 {
1312 	int i, off;
1313 
1314 	memset(hashkey, 0, 2 * AES_BLOCK_LEN);
1315 	off = 2 * AES_BLOCK_LEN / sizeof(uint32_t);
1316 	for (i = 0; i < klen / sizeof(uint32_t); i++, key += 4)
1317 		hashkey[i + off] = htobe32(le32dec(key));
1318 }
1319 
1320 static void
1321 safexcel_setkey_hmac_digest(const struct auth_hash *ahash, union authctx *ctx,
1322     char *buf)
1323 {
1324 	int hashwords, i;
1325 
1326 	switch (ahash->type) {
1327 	case CRYPTO_SHA1_HMAC:
1328 		hashwords = ahash->hashsize / sizeof(uint32_t);
1329 		for (i = 0; i < hashwords; i++)
1330 			((uint32_t *)buf)[i] = htobe32(ctx->sha1ctx.h.b32[i]);
1331 		break;
1332 	case CRYPTO_SHA2_224_HMAC:
1333 		hashwords = auth_hash_hmac_sha2_256.hashsize / sizeof(uint32_t);
1334 		for (i = 0; i < hashwords; i++)
1335 			((uint32_t *)buf)[i] = htobe32(ctx->sha224ctx.state[i]);
1336 		break;
1337 	case CRYPTO_SHA2_256_HMAC:
1338 		hashwords = ahash->hashsize / sizeof(uint32_t);
1339 		for (i = 0; i < hashwords; i++)
1340 			((uint32_t *)buf)[i] = htobe32(ctx->sha256ctx.state[i]);
1341 		break;
1342 	case CRYPTO_SHA2_384_HMAC:
1343 		hashwords = auth_hash_hmac_sha2_512.hashsize / sizeof(uint64_t);
1344 		for (i = 0; i < hashwords; i++)
1345 			((uint64_t *)buf)[i] = htobe64(ctx->sha384ctx.state[i]);
1346 		break;
1347 	case CRYPTO_SHA2_512_HMAC:
1348 		hashwords = ahash->hashsize / sizeof(uint64_t);
1349 		for (i = 0; i < hashwords; i++)
1350 			((uint64_t *)buf)[i] = htobe64(ctx->sha512ctx.state[i]);
1351 		break;
1352 	}
1353 }
1354 
1355 /*
1356  * Pre-compute the inner and outer digests used in the HMAC algorithm.
1357  */
1358 static void
1359 safexcel_setkey_hmac(const struct crypto_session_params *csp,
1360     const uint8_t *key, int klen, uint8_t *ipad, uint8_t *opad)
1361 {
1362 	union authctx ctx;
1363 	const struct auth_hash *ahash;
1364 
1365 	ahash = crypto_auth_hash(csp);
1366 	hmac_init_ipad(ahash, key, klen, &ctx);
1367 	safexcel_setkey_hmac_digest(ahash, &ctx, ipad);
1368 	hmac_init_opad(ahash, key, klen, &ctx);
1369 	safexcel_setkey_hmac_digest(ahash, &ctx, opad);
1370 	explicit_bzero(&ctx, ahash->ctxsize);
1371 }
1372 
1373 static void
1374 safexcel_setkey_xts(const uint8_t *key, int klen, uint8_t *tweakkey)
1375 {
1376 	memcpy(tweakkey, key + klen, klen);
1377 }
1378 
1379 /*
1380  * Populate a context record with paramters from a session.  Some consumers
1381  * specify per-request keys, in which case the context must be re-initialized
1382  * for each request.
1383  */
1384 static int
1385 safexcel_set_context(struct safexcel_context_record *ctx, int op,
1386     const uint8_t *ckey, const uint8_t *akey, struct safexcel_session *sess)
1387 {
1388 	const struct crypto_session_params *csp;
1389 	uint8_t *data;
1390 	uint32_t ctrl0, ctrl1;
1391 	int aklen, alg, cklen, off;
1392 
1393 	csp = crypto_get_params(sess->cses);
1394 	aklen = csp->csp_auth_klen;
1395 	cklen = csp->csp_cipher_klen;
1396 	if (csp->csp_cipher_alg == CRYPTO_AES_XTS)
1397 		cklen /= 2;
1398 
1399 	ctrl0 = sess->alg | sess->digest | sess->hash;
1400 	ctrl1 = sess->mode;
1401 
1402 	data = (uint8_t *)ctx->data;
1403 	if (csp->csp_cipher_alg != 0) {
1404 		memcpy(data, ckey, cklen);
1405 		off = cklen;
1406 	} else if (csp->csp_auth_alg == CRYPTO_AES_NIST_GMAC) {
1407 		memcpy(data, akey, aklen);
1408 		off = aklen;
1409 	} else {
1410 		off = 0;
1411 	}
1412 
1413 	switch (csp->csp_cipher_alg) {
1414 	case CRYPTO_AES_NIST_GCM_16:
1415 		safexcel_setkey_ghash(ckey, cklen, (uint32_t *)(data + off));
1416 		off += GMAC_BLOCK_LEN;
1417 		break;
1418 	case CRYPTO_AES_CCM_16:
1419 		safexcel_setkey_xcbcmac(ckey, cklen, (uint32_t *)(data + off));
1420 		off += AES_BLOCK_LEN * 2 + cklen;
1421 		break;
1422 	case CRYPTO_AES_XTS:
1423 		safexcel_setkey_xts(ckey, cklen, data + off);
1424 		off += cklen;
1425 		break;
1426 	}
1427 	switch (csp->csp_auth_alg) {
1428 	case CRYPTO_AES_NIST_GMAC:
1429 		safexcel_setkey_ghash(akey, aklen, (uint32_t *)(data + off));
1430 		off += GMAC_BLOCK_LEN;
1431 		break;
1432 	case CRYPTO_SHA1_HMAC:
1433 	case CRYPTO_SHA2_224_HMAC:
1434 	case CRYPTO_SHA2_256_HMAC:
1435 	case CRYPTO_SHA2_384_HMAC:
1436 	case CRYPTO_SHA2_512_HMAC:
1437 		safexcel_setkey_hmac(csp, akey, aklen,
1438 		    data + off, data + off + sess->statelen);
1439 		off += sess->statelen * 2;
1440 		break;
1441 	}
1442 	ctrl0 |= SAFEXCEL_CONTROL0_SIZE(off / sizeof(uint32_t));
1443 
1444 	alg = csp->csp_cipher_alg;
1445 	if (alg == 0)
1446 		alg = csp->csp_auth_alg;
1447 
1448 	switch (alg) {
1449 	case CRYPTO_AES_CCM_16:
1450 		if (CRYPTO_OP_IS_ENCRYPT(op)) {
1451 			ctrl0 |= SAFEXCEL_CONTROL0_TYPE_HASH_ENCRYPT_OUT |
1452 			    SAFEXCEL_CONTROL0_KEY_EN;
1453 		} else {
1454 			ctrl0 |= SAFEXCEL_CONTROL0_TYPE_DECRYPT_HASH_IN |
1455 			    SAFEXCEL_CONTROL0_KEY_EN;
1456 		}
1457 		ctrl1 |= SAFEXCEL_CONTROL1_IV0 | SAFEXCEL_CONTROL1_IV1 |
1458 		    SAFEXCEL_CONTROL1_IV2 | SAFEXCEL_CONTROL1_IV3;
1459 		break;
1460 	case CRYPTO_AES_CBC:
1461 	case CRYPTO_AES_ICM:
1462 	case CRYPTO_AES_XTS:
1463 		if (CRYPTO_OP_IS_ENCRYPT(op)) {
1464 			ctrl0 |= SAFEXCEL_CONTROL0_TYPE_CRYPTO_OUT |
1465 			    SAFEXCEL_CONTROL0_KEY_EN;
1466 			if (csp->csp_auth_alg != 0)
1467 				ctrl0 |=
1468 				    SAFEXCEL_CONTROL0_TYPE_ENCRYPT_HASH_OUT;
1469 		} else {
1470 			ctrl0 |= SAFEXCEL_CONTROL0_TYPE_CRYPTO_IN |
1471 			    SAFEXCEL_CONTROL0_KEY_EN;
1472 			if (csp->csp_auth_alg != 0)
1473 				ctrl0 |= SAFEXCEL_CONTROL0_TYPE_HASH_DECRYPT_IN;
1474 		}
1475 		break;
1476 	case CRYPTO_AES_NIST_GCM_16:
1477 	case CRYPTO_AES_NIST_GMAC:
1478 		if (CRYPTO_OP_IS_ENCRYPT(op) || csp->csp_auth_alg != 0) {
1479 			ctrl0 |= SAFEXCEL_CONTROL0_TYPE_CRYPTO_OUT |
1480 			    SAFEXCEL_CONTROL0_KEY_EN |
1481 			    SAFEXCEL_CONTROL0_TYPE_HASH_OUT;
1482 		} else {
1483 			ctrl0 |= SAFEXCEL_CONTROL0_TYPE_CRYPTO_IN |
1484 			    SAFEXCEL_CONTROL0_KEY_EN |
1485 			    SAFEXCEL_CONTROL0_TYPE_HASH_DECRYPT_IN;
1486 		}
1487 		if (csp->csp_cipher_alg == CRYPTO_AES_NIST_GCM_16) {
1488 			ctrl1 |= SAFEXCEL_CONTROL1_COUNTER_MODE |
1489 			    SAFEXCEL_CONTROL1_IV0 | SAFEXCEL_CONTROL1_IV1 |
1490 			    SAFEXCEL_CONTROL1_IV2;
1491 		}
1492 		break;
1493 	case CRYPTO_SHA1:
1494 	case CRYPTO_SHA2_224:
1495 	case CRYPTO_SHA2_256:
1496 	case CRYPTO_SHA2_384:
1497 	case CRYPTO_SHA2_512:
1498 		ctrl0 |= SAFEXCEL_CONTROL0_RESTART_HASH;
1499 		/* FALLTHROUGH */
1500 	case CRYPTO_SHA1_HMAC:
1501 	case CRYPTO_SHA2_224_HMAC:
1502 	case CRYPTO_SHA2_256_HMAC:
1503 	case CRYPTO_SHA2_384_HMAC:
1504 	case CRYPTO_SHA2_512_HMAC:
1505 		ctrl0 |= SAFEXCEL_CONTROL0_TYPE_HASH_OUT;
1506 		break;
1507 	}
1508 
1509 	ctx->control0 = ctrl0;
1510 	ctx->control1 = ctrl1;
1511 
1512 	return (off);
1513 }
1514 
1515 /*
1516  * Construct a no-op instruction, used to pad input tokens.
1517  */
1518 static void
1519 safexcel_instr_nop(struct safexcel_instr **instrp)
1520 {
1521 	struct safexcel_instr *instr;
1522 
1523 	instr = *instrp;
1524 	instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT;
1525 	instr->length = (1 << 2);
1526 	instr->status = 0;
1527 	instr->instructions = 0;
1528 
1529 	*instrp = instr + 1;
1530 }
1531 
1532 /*
1533  * Insert the digest of the input payload.  This is typically the last
1534  * instruction of a sequence.
1535  */
1536 static void
1537 safexcel_instr_insert_digest(struct safexcel_instr **instrp, int len)
1538 {
1539 	struct safexcel_instr *instr;
1540 
1541 	instr = *instrp;
1542 	instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT;
1543 	instr->length = len;
1544 	instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH |
1545 	    SAFEXCEL_INSTR_STATUS_LAST_PACKET;
1546 	instr->instructions = SAFEXCEL_INSTR_DEST_OUTPUT |
1547 	    SAFEXCEL_INSTR_INSERT_HASH_DIGEST;
1548 
1549 	*instrp = instr + 1;
1550 }
1551 
1552 /*
1553  * Retrieve and verify a digest.
1554  */
1555 static void
1556 safexcel_instr_retrieve_digest(struct safexcel_instr **instrp, int len)
1557 {
1558 	struct safexcel_instr *instr;
1559 
1560 	instr = *instrp;
1561 	instr->opcode = SAFEXCEL_INSTR_OPCODE_RETRIEVE;
1562 	instr->length = len;
1563 	instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH |
1564 	    SAFEXCEL_INSTR_STATUS_LAST_PACKET;
1565 	instr->instructions = SAFEXCEL_INSTR_INSERT_HASH_DIGEST;
1566 	instr++;
1567 
1568 	instr->opcode = SAFEXCEL_INSTR_OPCODE_VERIFY_FIELDS;
1569 	instr->length = len | SAFEXCEL_INSTR_VERIFY_HASH;
1570 	instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH |
1571 	    SAFEXCEL_INSTR_STATUS_LAST_PACKET;
1572 	instr->instructions = SAFEXCEL_INSTR_VERIFY_PADDING;
1573 
1574 	*instrp = instr + 1;
1575 }
1576 
1577 static void
1578 safexcel_instr_temp_aes_block(struct safexcel_instr **instrp)
1579 {
1580 	struct safexcel_instr *instr;
1581 
1582 	instr = *instrp;
1583 	instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT_REMOVE_RESULT;
1584 	instr->length = 0;
1585 	instr->status = 0;
1586 	instr->instructions = AES_BLOCK_LEN;
1587 	instr++;
1588 
1589 	instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT;
1590 	instr->length = AES_BLOCK_LEN;
1591 	instr->status = 0;
1592 	instr->instructions = SAFEXCEL_INSTR_DEST_OUTPUT |
1593 	    SAFEXCEL_INSTR_DEST_CRYPTO;
1594 
1595 	*instrp = instr + 1;
1596 }
1597 
1598 /*
1599  * Handle a request for an unauthenticated block cipher.
1600  */
1601 static void
1602 safexcel_instr_cipher(struct safexcel_request *req,
1603     struct safexcel_instr *instr, struct safexcel_cmd_descr *cdesc)
1604 {
1605 	struct cryptop *crp;
1606 
1607 	crp = req->crp;
1608 
1609 	/* Insert the payload. */
1610 	instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1611 	instr->length = crp->crp_payload_length;
1612 	instr->status = SAFEXCEL_INSTR_STATUS_LAST_PACKET |
1613 	    SAFEXCEL_INSTR_STATUS_LAST_HASH;
1614 	instr->instructions = SAFEXCEL_INSTR_INS_LAST |
1615 	    SAFEXCEL_INSTR_DEST_CRYPTO | SAFEXCEL_INSTR_DEST_OUTPUT;
1616 
1617 	cdesc->additional_cdata_size = 1;
1618 }
1619 
1620 static void
1621 safexcel_instr_eta(struct safexcel_request *req, struct safexcel_instr *instr,
1622     struct safexcel_cmd_descr *cdesc)
1623 {
1624 	const struct crypto_session_params *csp;
1625 	struct cryptop *crp;
1626 	struct safexcel_instr *start;
1627 
1628 	crp = req->crp;
1629 	csp = crypto_get_params(crp->crp_session);
1630 	start = instr;
1631 
1632 	/* Insert the AAD. */
1633 	instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1634 	instr->length = crp->crp_aad_length;
1635 	instr->status = crp->crp_payload_length == 0 ?
1636 	    SAFEXCEL_INSTR_STATUS_LAST_HASH : 0;
1637 	instr->instructions = SAFEXCEL_INSTR_INS_LAST |
1638 	    SAFEXCEL_INSTR_DEST_HASH;
1639 	instr++;
1640 
1641 	/* Encrypt any data left in the request. */
1642 	if (crp->crp_payload_length > 0) {
1643 		instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1644 		instr->length = crp->crp_payload_length;
1645 		instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH;
1646 		instr->instructions = SAFEXCEL_INSTR_INS_LAST |
1647 		    SAFEXCEL_INSTR_DEST_CRYPTO |
1648 		    SAFEXCEL_INSTR_DEST_HASH |
1649 		    SAFEXCEL_INSTR_DEST_OUTPUT;
1650 		instr++;
1651 	}
1652 
1653 	/*
1654 	 * Compute the digest, or extract it and place it in the output stream.
1655 	 */
1656 	if (CRYPTO_OP_IS_ENCRYPT(crp->crp_op))
1657 		safexcel_instr_insert_digest(&instr, req->sess->digestlen);
1658 	else
1659 		safexcel_instr_retrieve_digest(&instr, req->sess->digestlen);
1660 	cdesc->additional_cdata_size = instr - start;
1661 }
1662 
1663 static void
1664 safexcel_instr_sha_hash(struct safexcel_request *req,
1665     struct safexcel_instr *instr)
1666 {
1667 	struct cryptop *crp;
1668 	struct safexcel_instr *start;
1669 
1670 	crp = req->crp;
1671 	start = instr;
1672 
1673 	/* Pass the input data to the hash engine. */
1674 	instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1675 	instr->length = crp->crp_payload_length;
1676 	instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH;
1677 	instr->instructions = SAFEXCEL_INSTR_DEST_HASH;
1678 	instr++;
1679 
1680 	/* Insert the hash result into the output stream. */
1681 	safexcel_instr_insert_digest(&instr, req->sess->digestlen);
1682 
1683 	/* Pad the rest of the inline instruction space. */
1684 	while (instr != start + SAFEXCEL_MAX_ITOKENS)
1685 		safexcel_instr_nop(&instr);
1686 }
1687 
1688 static void
1689 safexcel_instr_ccm(struct safexcel_request *req, struct safexcel_instr *instr,
1690     struct safexcel_cmd_descr *cdesc)
1691 {
1692 	struct cryptop *crp;
1693 	struct safexcel_instr *start;
1694 	uint8_t *a0, *b0, *alenp, L;
1695 	int aalign, blen;
1696 
1697 	crp = req->crp;
1698 	start = instr;
1699 
1700 	/*
1701 	 * Construct two blocks, A0 and B0, used in encryption and
1702 	 * authentication, respectively.  A0 is embedded in the token
1703 	 * descriptor, and B0 is inserted directly into the data stream using
1704 	 * instructions below.
1705 	 *
1706 	 * OCF seems to assume a 12-byte IV, fixing L (the payload length size)
1707 	 * at 3 bytes due to the layout of B0.  This is fine since the driver
1708 	 * has a maximum of 65535 bytes anyway.
1709 	 */
1710 	blen = AES_BLOCK_LEN;
1711 	L = 3;
1712 
1713 	a0 = (uint8_t *)&cdesc->control_data.token[0];
1714 	memset(a0, 0, blen);
1715 	a0[0] = L - 1;
1716 	memcpy(&a0[1], req->iv, AES_CCM_IV_LEN);
1717 
1718 	/*
1719 	 * Insert B0 and the AAD length into the input stream.
1720 	 */
1721 	instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT;
1722 	instr->length = blen + (crp->crp_aad_length > 0 ? 2 : 0);
1723 	instr->status = 0;
1724 	instr->instructions = SAFEXCEL_INSTR_DEST_HASH |
1725 	    SAFEXCEL_INSTR_INSERT_IMMEDIATE;
1726 	instr++;
1727 
1728 	b0 = (uint8_t *)instr;
1729 	memset(b0, 0, blen);
1730 	b0[0] =
1731 	    (L - 1) | /* payload length size */
1732 	    ((CCM_CBC_MAX_DIGEST_LEN - 2) / 2) << 3 /* digest length */ |
1733 	    (crp->crp_aad_length > 0 ? 1 : 0) << 6 /* AAD present bit */;
1734 	memcpy(&b0[1], req->iv, AES_CCM_IV_LEN);
1735 	b0[14] = crp->crp_payload_length >> 8;
1736 	b0[15] = crp->crp_payload_length & 0xff;
1737 	instr += blen / sizeof(*instr);
1738 
1739 	/* Insert the AAD length and data into the input stream. */
1740 	if (crp->crp_aad_length > 0) {
1741 		alenp = (uint8_t *)instr;
1742 		alenp[0] = crp->crp_aad_length >> 8;
1743 		alenp[1] = crp->crp_aad_length & 0xff;
1744 		alenp[2] = 0;
1745 		alenp[3] = 0;
1746 		instr++;
1747 
1748 		instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1749 		instr->length = crp->crp_aad_length;
1750 		instr->status = 0;
1751 		instr->instructions = SAFEXCEL_INSTR_DEST_HASH;
1752 		instr++;
1753 
1754 		/* Insert zero padding. */
1755 		aalign = (crp->crp_aad_length + 2) & (blen - 1);
1756 		instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT;
1757 		instr->length = aalign == 0 ? 0 :
1758 		    blen - ((crp->crp_aad_length + 2) & (blen - 1));
1759 		instr->status = crp->crp_payload_length == 0 ?
1760 		    SAFEXCEL_INSTR_STATUS_LAST_HASH : 0;
1761 		instr->instructions = SAFEXCEL_INSTR_DEST_HASH;
1762 		instr++;
1763 	}
1764 
1765 	safexcel_instr_temp_aes_block(&instr);
1766 
1767 	/* Insert the cipher payload into the input stream. */
1768 	if (crp->crp_payload_length > 0) {
1769 		instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1770 		instr->length = crp->crp_payload_length;
1771 		instr->status = (crp->crp_payload_length & (blen - 1)) == 0 ?
1772 		    SAFEXCEL_INSTR_STATUS_LAST_HASH : 0;
1773 		instr->instructions = SAFEXCEL_INSTR_DEST_OUTPUT |
1774 		    SAFEXCEL_INSTR_DEST_CRYPTO |
1775 		    SAFEXCEL_INSTR_DEST_HASH |
1776 		    SAFEXCEL_INSTR_INS_LAST;
1777 		instr++;
1778 
1779 		/* Insert zero padding. */
1780 		if (crp->crp_payload_length & (blen - 1)) {
1781 			instr->opcode = SAFEXCEL_INSTR_OPCODE_INSERT;
1782 			instr->length = blen -
1783 			    (crp->crp_payload_length & (blen - 1));
1784 			instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH;
1785 			instr->instructions = SAFEXCEL_INSTR_DEST_HASH;
1786 			instr++;
1787 		}
1788 	}
1789 
1790 	/*
1791 	 * Compute the digest, or extract it and place it in the output stream.
1792 	 */
1793 	if (CRYPTO_OP_IS_ENCRYPT(crp->crp_op))
1794 		safexcel_instr_insert_digest(&instr, req->sess->digestlen);
1795 	else
1796 		safexcel_instr_retrieve_digest(&instr, req->sess->digestlen);
1797 
1798 	cdesc->additional_cdata_size = instr - start;
1799 }
1800 
1801 static void
1802 safexcel_instr_gcm(struct safexcel_request *req, struct safexcel_instr *instr,
1803     struct safexcel_cmd_descr *cdesc)
1804 {
1805 	struct cryptop *crp;
1806 	struct safexcel_instr *start;
1807 
1808 	memcpy(cdesc->control_data.token, req->iv, AES_GCM_IV_LEN);
1809 	cdesc->control_data.token[3] = htobe32(1);
1810 
1811 	crp = req->crp;
1812 	start = instr;
1813 
1814 	/* Insert the AAD into the input stream. */
1815 	instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1816 	instr->length = crp->crp_aad_length;
1817 	instr->status = crp->crp_payload_length == 0 ?
1818 	    SAFEXCEL_INSTR_STATUS_LAST_HASH : 0;
1819 	instr->instructions = SAFEXCEL_INSTR_INS_LAST |
1820 	    SAFEXCEL_INSTR_DEST_HASH;
1821 	instr++;
1822 
1823 	safexcel_instr_temp_aes_block(&instr);
1824 
1825 	/* Insert the cipher payload into the input stream. */
1826 	if (crp->crp_payload_length > 0) {
1827 		instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1828 		instr->length = crp->crp_payload_length;
1829 		instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH;
1830 		instr->instructions = SAFEXCEL_INSTR_DEST_OUTPUT |
1831 		    SAFEXCEL_INSTR_DEST_CRYPTO | SAFEXCEL_INSTR_DEST_HASH |
1832 		    SAFEXCEL_INSTR_INS_LAST;
1833 		instr++;
1834 	}
1835 
1836 	/*
1837 	 * Compute the digest, or extract it and place it in the output stream.
1838 	 */
1839 	if (CRYPTO_OP_IS_ENCRYPT(crp->crp_op))
1840 		safexcel_instr_insert_digest(&instr, req->sess->digestlen);
1841 	else
1842 		safexcel_instr_retrieve_digest(&instr, req->sess->digestlen);
1843 
1844 	cdesc->additional_cdata_size = instr - start;
1845 }
1846 
1847 static void
1848 safexcel_instr_gmac(struct safexcel_request *req, struct safexcel_instr *instr,
1849     struct safexcel_cmd_descr *cdesc)
1850 {
1851 	struct cryptop *crp;
1852 	struct safexcel_instr *start;
1853 
1854 	memcpy(cdesc->control_data.token, req->iv, AES_GCM_IV_LEN);
1855 	cdesc->control_data.token[3] = htobe32(1);
1856 
1857 	crp = req->crp;
1858 	start = instr;
1859 
1860 	instr->opcode = SAFEXCEL_INSTR_OPCODE_DIRECTION;
1861 	instr->length = crp->crp_payload_length;
1862 	instr->status = SAFEXCEL_INSTR_STATUS_LAST_HASH;
1863 	instr->instructions = SAFEXCEL_INSTR_INS_LAST |
1864 	    SAFEXCEL_INSTR_DEST_HASH;
1865 	instr++;
1866 
1867 	safexcel_instr_temp_aes_block(&instr);
1868 
1869 	safexcel_instr_insert_digest(&instr, req->sess->digestlen);
1870 
1871 	cdesc->additional_cdata_size = instr - start;
1872 }
1873 
1874 static void
1875 safexcel_set_token(struct safexcel_request *req)
1876 {
1877 	const struct crypto_session_params *csp;
1878 	struct cryptop *crp;
1879 	struct safexcel_cmd_descr *cdesc;
1880 	struct safexcel_context_record *ctx;
1881 	struct safexcel_context_template *ctxtmp;
1882 	struct safexcel_instr *instr;
1883 	struct safexcel_softc *sc;
1884 	const uint8_t *akey, *ckey;
1885 	int ringidx;
1886 
1887 	crp = req->crp;
1888 	csp = crypto_get_params(crp->crp_session);
1889 	cdesc = req->cdesc;
1890 	sc = req->sc;
1891 	ringidx = req->ringidx;
1892 
1893 	akey = crp->crp_auth_key;
1894 	ckey = crp->crp_cipher_key;
1895 	if (akey != NULL || ckey != NULL) {
1896 		/*
1897 		 * If we have a per-request key we have to generate the context
1898 		 * record on the fly.
1899 		 */
1900 		if (akey == NULL)
1901 			akey = csp->csp_auth_key;
1902 		if (ckey == NULL)
1903 			ckey = csp->csp_cipher_key;
1904 		ctx = (struct safexcel_context_record *)req->ctx.vaddr;
1905 		(void)safexcel_set_context(ctx, crp->crp_op, ckey, akey,
1906 		    req->sess);
1907 	} else {
1908 		/*
1909 		 * Use the context record template computed at session
1910 		 * initialization time.
1911 		 */
1912 		ctxtmp = CRYPTO_OP_IS_ENCRYPT(crp->crp_op) ?
1913 		    &req->sess->encctx : &req->sess->decctx;
1914 		ctx = &ctxtmp->ctx;
1915 		memcpy(req->ctx.vaddr + 2 * sizeof(uint32_t), ctx->data,
1916 		    ctxtmp->len);
1917 	}
1918 	cdesc->control_data.control0 = ctx->control0;
1919 	cdesc->control_data.control1 = ctx->control1;
1920 
1921 	/*
1922 	 * For keyless hash operations, the token instructions can be embedded
1923 	 * in the token itself.  Otherwise we use an additional token descriptor
1924 	 * and the embedded instruction space is used to store the IV.
1925 	 */
1926 	if (csp->csp_cipher_alg == 0 &&
1927 	    csp->csp_auth_alg != CRYPTO_AES_NIST_GMAC) {
1928 		instr = (void *)cdesc->control_data.token;
1929 	} else {
1930 		instr = (void *)(sc->sc_ring[ringidx].dma_atok.vaddr +
1931 		    sc->sc_config.atok_offset *
1932 		    (cdesc - sc->sc_ring[ringidx].cdr.desc));
1933 		cdesc->control_data.options |= SAFEXCEL_OPTION_4_TOKEN_IV_CMD;
1934 	}
1935 
1936 	switch (csp->csp_cipher_alg) {
1937 	case CRYPTO_AES_NIST_GCM_16:
1938 		safexcel_instr_gcm(req, instr, cdesc);
1939 		break;
1940 	case CRYPTO_AES_CCM_16:
1941 		safexcel_instr_ccm(req, instr, cdesc);
1942 		break;
1943 	case CRYPTO_AES_XTS:
1944 		memcpy(cdesc->control_data.token, req->iv, AES_XTS_IV_LEN);
1945 		memset(cdesc->control_data.token +
1946 		    AES_XTS_IV_LEN / sizeof(uint32_t), 0, AES_XTS_IV_LEN);
1947 
1948 		safexcel_instr_cipher(req, instr, cdesc);
1949 		break;
1950 	case CRYPTO_AES_CBC:
1951 	case CRYPTO_AES_ICM:
1952 		memcpy(cdesc->control_data.token, req->iv, AES_BLOCK_LEN);
1953 		if (csp->csp_auth_alg != 0)
1954 			safexcel_instr_eta(req, instr, cdesc);
1955 		else
1956 			safexcel_instr_cipher(req, instr, cdesc);
1957 		break;
1958 	default:
1959 		switch (csp->csp_auth_alg) {
1960 		case CRYPTO_SHA1:
1961 		case CRYPTO_SHA1_HMAC:
1962 		case CRYPTO_SHA2_224:
1963 		case CRYPTO_SHA2_224_HMAC:
1964 		case CRYPTO_SHA2_256:
1965 		case CRYPTO_SHA2_256_HMAC:
1966 		case CRYPTO_SHA2_384:
1967 		case CRYPTO_SHA2_384_HMAC:
1968 		case CRYPTO_SHA2_512:
1969 		case CRYPTO_SHA2_512_HMAC:
1970 			safexcel_instr_sha_hash(req, instr);
1971 			break;
1972 		case CRYPTO_AES_NIST_GMAC:
1973 			safexcel_instr_gmac(req, instr, cdesc);
1974 			break;
1975 		default:
1976 			panic("unhandled auth request %d", csp->csp_auth_alg);
1977 		}
1978 		break;
1979 	}
1980 }
1981 
1982 static struct safexcel_res_descr *
1983 safexcel_res_descr_add(struct safexcel_ring *ring, bool first, bool last,
1984     bus_addr_t data, uint32_t len)
1985 {
1986 	struct safexcel_res_descr *rdesc;
1987 	struct safexcel_res_descr_ring *rring;
1988 
1989 	mtx_assert(&ring->mtx, MA_OWNED);
1990 
1991 	rring = &ring->rdr;
1992 	if ((rring->write + 1) % SAFEXCEL_RING_SIZE == rring->read)
1993 		return (NULL);
1994 
1995 	rdesc = &rring->desc[rring->write];
1996 	rring->write = (rring->write + 1) % SAFEXCEL_RING_SIZE;
1997 
1998 	rdesc->particle_size = len;
1999 	rdesc->rsvd0 = 0;
2000 	rdesc->descriptor_overflow = 0;
2001 	rdesc->buffer_overflow = 0;
2002 	rdesc->last_seg = last;
2003 	rdesc->first_seg = first;
2004 	rdesc->result_size =
2005 	    sizeof(struct safexcel_res_data) / sizeof(uint32_t);
2006 	rdesc->rsvd1 = 0;
2007 	rdesc->data_lo = SAFEXCEL_ADDR_LO(data);
2008 	rdesc->data_hi = SAFEXCEL_ADDR_HI(data);
2009 
2010 	if (first) {
2011 		rdesc->result_data.packet_length = 0;
2012 		rdesc->result_data.error_code = 0;
2013 	}
2014 
2015 	return (rdesc);
2016 }
2017 
2018 static struct safexcel_cmd_descr *
2019 safexcel_cmd_descr_add(struct safexcel_ring *ring, bool first, bool last,
2020     bus_addr_t data, uint32_t seglen, uint32_t reqlen, bus_addr_t context)
2021 {
2022 	struct safexcel_cmd_descr *cdesc;
2023 	struct safexcel_cmd_descr_ring *cring;
2024 
2025 	KASSERT(reqlen <= SAFEXCEL_MAX_REQUEST_SIZE,
2026 	    ("%s: request length %u too long", __func__, reqlen));
2027 	mtx_assert(&ring->mtx, MA_OWNED);
2028 
2029 	cring = &ring->cdr;
2030 	if ((cring->write + 1) % SAFEXCEL_RING_SIZE == cring->read)
2031 		return (NULL);
2032 
2033 	cdesc = &cring->desc[cring->write];
2034 	cring->write = (cring->write + 1) % SAFEXCEL_RING_SIZE;
2035 
2036 	cdesc->particle_size = seglen;
2037 	cdesc->rsvd0 = 0;
2038 	cdesc->last_seg = last;
2039 	cdesc->first_seg = first;
2040 	cdesc->additional_cdata_size = 0;
2041 	cdesc->rsvd1 = 0;
2042 	cdesc->data_lo = SAFEXCEL_ADDR_LO(data);
2043 	cdesc->data_hi = SAFEXCEL_ADDR_HI(data);
2044 	if (first) {
2045 		cdesc->control_data.packet_length = reqlen;
2046 		cdesc->control_data.options = SAFEXCEL_OPTION_IP |
2047 		    SAFEXCEL_OPTION_CP | SAFEXCEL_OPTION_CTX_CTRL_IN_CMD |
2048 		    SAFEXCEL_OPTION_RC_AUTO;
2049 		cdesc->control_data.type = SAFEXCEL_TOKEN_TYPE_BYPASS;
2050 		cdesc->control_data.context_lo = SAFEXCEL_ADDR_LO(context) |
2051 		    SAFEXCEL_CONTEXT_SMALL;
2052 		cdesc->control_data.context_hi = SAFEXCEL_ADDR_HI(context);
2053 	}
2054 
2055 	return (cdesc);
2056 }
2057 
2058 static void
2059 safexcel_cmd_descr_rollback(struct safexcel_ring *ring, int count)
2060 {
2061 	struct safexcel_cmd_descr_ring *cring;
2062 
2063 	mtx_assert(&ring->mtx, MA_OWNED);
2064 
2065 	cring = &ring->cdr;
2066 	cring->write -= count;
2067 	if (cring->write < 0)
2068 		cring->write += SAFEXCEL_RING_SIZE;
2069 }
2070 
2071 static void
2072 safexcel_res_descr_rollback(struct safexcel_ring *ring, int count)
2073 {
2074 	struct safexcel_res_descr_ring *rring;
2075 
2076 	mtx_assert(&ring->mtx, MA_OWNED);
2077 
2078 	rring = &ring->rdr;
2079 	rring->write -= count;
2080 	if (rring->write < 0)
2081 		rring->write += SAFEXCEL_RING_SIZE;
2082 }
2083 
2084 static void
2085 safexcel_append_segs(bus_dma_segment_t *segs, int nseg, struct sglist *sg,
2086     int start, int len)
2087 {
2088 	bus_dma_segment_t *seg;
2089 	size_t seglen;
2090 	int error, i;
2091 
2092 	for (i = 0; i < nseg && len > 0; i++) {
2093 		seg = &segs[i];
2094 
2095 		if (seg->ds_len <= start) {
2096 			start -= seg->ds_len;
2097 			continue;
2098 		}
2099 
2100 		seglen = MIN(len, seg->ds_len - start);
2101 		error = sglist_append_phys(sg, seg->ds_addr + start, seglen);
2102 		if (error != 0)
2103 			panic("%s: ran out of segments: %d", __func__, error);
2104 		len -= seglen;
2105 		start = 0;
2106 	}
2107 }
2108 
2109 static void
2110 safexcel_create_chain_cb(void *arg, bus_dma_segment_t *segs, int nseg,
2111     int error)
2112 {
2113 	const struct crypto_session_params *csp;
2114 	struct cryptop *crp;
2115 	struct safexcel_cmd_descr *cdesc;
2116 	struct safexcel_request *req;
2117 	struct safexcel_ring *ring;
2118 	struct safexcel_session *sess;
2119 	struct sglist *sg;
2120 	size_t inlen;
2121 	int i;
2122 	bool first, last;
2123 
2124 	req = arg;
2125 	if (error != 0) {
2126 		req->error = error;
2127 		return;
2128 	}
2129 
2130 	crp = req->crp;
2131 	csp = crypto_get_params(crp->crp_session);
2132 	sess = req->sess;
2133 	ring = &req->sc->sc_ring[req->ringidx];
2134 
2135 	mtx_assert(&ring->mtx, MA_OWNED);
2136 
2137 	/*
2138 	 * Set up descriptors for input and output data.
2139 	 *
2140 	 * The processing engine programs require that any AAD comes first,
2141 	 * followed by the cipher plaintext, followed by the digest.  Some
2142 	 * consumers place the digest first in the input buffer, in which case
2143 	 * we have to create an extra descriptor.
2144 	 *
2145 	 * As an optimization, unmodified data is not passed to the output
2146 	 * stream.
2147 	 */
2148 	sglist_reset(ring->cmd_data);
2149 	sglist_reset(ring->res_data);
2150 	if (crp->crp_aad_length != 0) {
2151 		safexcel_append_segs(segs, nseg, ring->cmd_data,
2152 		    crp->crp_aad_start, crp->crp_aad_length);
2153 	}
2154 	safexcel_append_segs(segs, nseg, ring->cmd_data,
2155 	    crp->crp_payload_start, crp->crp_payload_length);
2156 	if (csp->csp_cipher_alg != 0) {
2157 		safexcel_append_segs(segs, nseg, ring->res_data,
2158 		    crp->crp_payload_start, crp->crp_payload_length);
2159 	}
2160 	if (sess->digestlen > 0) {
2161 		if ((crp->crp_op & CRYPTO_OP_VERIFY_DIGEST) != 0) {
2162 			safexcel_append_segs(segs, nseg, ring->cmd_data,
2163 			    crp->crp_digest_start, sess->digestlen);
2164 		} else {
2165 			safexcel_append_segs(segs, nseg, ring->res_data,
2166 			    crp->crp_digest_start, sess->digestlen);
2167 		}
2168 	}
2169 
2170 	sg = ring->cmd_data;
2171 	if (sg->sg_nseg == 0) {
2172 		/*
2173 		 * Fake a segment for the command descriptor if the input has
2174 		 * length zero.  The EIP97 apparently does not handle
2175 		 * zero-length packets properly since subsequent requests return
2176 		 * bogus errors, so provide a dummy segment using the context
2177 		 * descriptor.  Also, we must allocate at least one command ring
2178 		 * entry per request to keep the request shadow ring in sync.
2179 		 */
2180 		(void)sglist_append_phys(sg, req->ctx.paddr, 1);
2181 	}
2182 	for (i = 0, inlen = 0; i < sg->sg_nseg; i++)
2183 		inlen += sg->sg_segs[i].ss_len;
2184 	for (i = 0; i < sg->sg_nseg; i++) {
2185 		first = i == 0;
2186 		last = i == sg->sg_nseg - 1;
2187 
2188 		cdesc = safexcel_cmd_descr_add(ring, first, last,
2189 		    sg->sg_segs[i].ss_paddr, sg->sg_segs[i].ss_len,
2190 		    (uint32_t)inlen, req->ctx.paddr);
2191 		if (cdesc == NULL) {
2192 			safexcel_cmd_descr_rollback(ring, i);
2193 			counter_u64_add(req->sc->sc_cdesc_alloc_failures, 1);
2194 			req->error = ERESTART;
2195 			return;
2196 		}
2197 		if (i == 0)
2198 			req->cdesc = cdesc;
2199 	}
2200 	req->cdescs = sg->sg_nseg;
2201 
2202 	sg = ring->res_data;
2203 	if (sg->sg_nseg == 0) {
2204 		/*
2205 		 * We need a result descriptor even if the output stream will be
2206 		 * empty, for example when verifying an AAD digest.
2207 		 */
2208 		sg->sg_segs[0].ss_paddr = 0;
2209 		sg->sg_segs[0].ss_len = 0;
2210 		sg->sg_nseg = 1;
2211 	}
2212 	for (i = 0; i < sg->sg_nseg; i++) {
2213 		first = i == 0;
2214 		last = i == sg->sg_nseg - 1;
2215 
2216 		if (safexcel_res_descr_add(ring, first, last,
2217 		    sg->sg_segs[i].ss_paddr, sg->sg_segs[i].ss_len) == NULL) {
2218 			safexcel_cmd_descr_rollback(ring,
2219 			    ring->cmd_data->sg_nseg);
2220 			safexcel_res_descr_rollback(ring, i);
2221 			counter_u64_add(req->sc->sc_rdesc_alloc_failures, 1);
2222 			req->error = ERESTART;
2223 			return;
2224 		}
2225 	}
2226 	req->rdescs = sg->sg_nseg;
2227 }
2228 
2229 static int
2230 safexcel_create_chain(struct safexcel_ring *ring, struct safexcel_request *req)
2231 {
2232 	int error;
2233 
2234 	req->error = 0;
2235 	req->cdescs = req->rdescs = 0;
2236 
2237 	error = bus_dmamap_load_crp(ring->data_dtag, req->dmap, req->crp,
2238 	    safexcel_create_chain_cb, req, BUS_DMA_NOWAIT);
2239 	if (error == 0)
2240 		req->dmap_loaded = true;
2241 
2242 	if (req->error != 0)
2243 		error = req->error;
2244 
2245 	return (error);
2246 }
2247 
2248 static bool
2249 safexcel_probe_cipher(const struct crypto_session_params *csp)
2250 {
2251 	switch (csp->csp_cipher_alg) {
2252 	case CRYPTO_AES_CBC:
2253 	case CRYPTO_AES_ICM:
2254 		if (csp->csp_ivlen != AES_BLOCK_LEN)
2255 			return (false);
2256 		break;
2257 	case CRYPTO_AES_XTS:
2258 		if (csp->csp_ivlen != AES_XTS_IV_LEN)
2259 			return (false);
2260 		break;
2261 	default:
2262 		return (false);
2263 	}
2264 
2265 	return (true);
2266 }
2267 
2268 /*
2269  * Determine whether the driver can implement a session with the requested
2270  * parameters.
2271  */
2272 static int
2273 safexcel_probesession(device_t dev, const struct crypto_session_params *csp)
2274 {
2275 	if (csp->csp_flags != 0)
2276 		return (EINVAL);
2277 
2278 	switch (csp->csp_mode) {
2279 	case CSP_MODE_CIPHER:
2280 		if (!safexcel_probe_cipher(csp))
2281 			return (EINVAL);
2282 		break;
2283 	case CSP_MODE_DIGEST:
2284 		switch (csp->csp_auth_alg) {
2285 		case CRYPTO_AES_NIST_GMAC:
2286 			if (csp->csp_ivlen != AES_GCM_IV_LEN)
2287 				return (EINVAL);
2288 			break;
2289 		case CRYPTO_SHA1:
2290 		case CRYPTO_SHA1_HMAC:
2291 		case CRYPTO_SHA2_224:
2292 		case CRYPTO_SHA2_224_HMAC:
2293 		case CRYPTO_SHA2_256:
2294 		case CRYPTO_SHA2_256_HMAC:
2295 		case CRYPTO_SHA2_384:
2296 		case CRYPTO_SHA2_384_HMAC:
2297 		case CRYPTO_SHA2_512:
2298 		case CRYPTO_SHA2_512_HMAC:
2299 			break;
2300 		default:
2301 			return (EINVAL);
2302 		}
2303 		break;
2304 	case CSP_MODE_AEAD:
2305 		switch (csp->csp_cipher_alg) {
2306 		case CRYPTO_AES_NIST_GCM_16:
2307 			if (csp->csp_ivlen != AES_GCM_IV_LEN)
2308 				return (EINVAL);
2309 			break;
2310 		case CRYPTO_AES_CCM_16:
2311 			if (csp->csp_ivlen != AES_CCM_IV_LEN)
2312 				return (EINVAL);
2313 			break;
2314 		default:
2315 			return (EINVAL);
2316 		}
2317 		break;
2318 	case CSP_MODE_ETA:
2319 		if (!safexcel_probe_cipher(csp))
2320 			return (EINVAL);
2321 		switch (csp->csp_cipher_alg) {
2322 		case CRYPTO_AES_CBC:
2323 		case CRYPTO_AES_ICM:
2324 			/*
2325 			 * The EIP-97 does not support combining AES-XTS with
2326 			 * hash operations.
2327 			 */
2328 			if (csp->csp_auth_alg != CRYPTO_SHA1_HMAC &&
2329 			    csp->csp_auth_alg != CRYPTO_SHA2_224_HMAC &&
2330 			    csp->csp_auth_alg != CRYPTO_SHA2_256_HMAC &&
2331 			    csp->csp_auth_alg != CRYPTO_SHA2_384_HMAC &&
2332 			    csp->csp_auth_alg != CRYPTO_SHA2_512_HMAC)
2333 				return (EINVAL);
2334 			break;
2335 		default:
2336 			return (EINVAL);
2337 		}
2338 		break;
2339 	default:
2340 		return (EINVAL);
2341 	}
2342 
2343 	return (CRYPTODEV_PROBE_HARDWARE);
2344 }
2345 
2346 static uint32_t
2347 safexcel_aes_algid(int keylen)
2348 {
2349 	switch (keylen) {
2350 	case 16:
2351 		return (SAFEXCEL_CONTROL0_CRYPTO_ALG_AES128);
2352 	case 24:
2353 		return (SAFEXCEL_CONTROL0_CRYPTO_ALG_AES192);
2354 	case 32:
2355 		return (SAFEXCEL_CONTROL0_CRYPTO_ALG_AES256);
2356 	default:
2357 		panic("invalid AES key length %d", keylen);
2358 	}
2359 }
2360 
2361 static uint32_t
2362 safexcel_aes_ccm_hashid(int keylen)
2363 {
2364 	switch (keylen) {
2365 	case 16:
2366 		return (SAFEXCEL_CONTROL0_HASH_ALG_XCBC128);
2367 	case 24:
2368 		return (SAFEXCEL_CONTROL0_HASH_ALG_XCBC192);
2369 	case 32:
2370 		return (SAFEXCEL_CONTROL0_HASH_ALG_XCBC256);
2371 	default:
2372 		panic("invalid AES key length %d", keylen);
2373 	}
2374 }
2375 
2376 static uint32_t
2377 safexcel_sha_hashid(int alg)
2378 {
2379 	switch (alg) {
2380 	case CRYPTO_SHA1:
2381 	case CRYPTO_SHA1_HMAC:
2382 		return (SAFEXCEL_CONTROL0_HASH_ALG_SHA1);
2383 	case CRYPTO_SHA2_224:
2384 	case CRYPTO_SHA2_224_HMAC:
2385 		return (SAFEXCEL_CONTROL0_HASH_ALG_SHA224);
2386 	case CRYPTO_SHA2_256:
2387 	case CRYPTO_SHA2_256_HMAC:
2388 		return (SAFEXCEL_CONTROL0_HASH_ALG_SHA256);
2389 	case CRYPTO_SHA2_384:
2390 	case CRYPTO_SHA2_384_HMAC:
2391 		return (SAFEXCEL_CONTROL0_HASH_ALG_SHA384);
2392 	case CRYPTO_SHA2_512:
2393 	case CRYPTO_SHA2_512_HMAC:
2394 		return (SAFEXCEL_CONTROL0_HASH_ALG_SHA512);
2395 	default:
2396 		__assert_unreachable();
2397 	}
2398 }
2399 
2400 static int
2401 safexcel_sha_hashlen(int alg)
2402 {
2403 	switch (alg) {
2404 	case CRYPTO_SHA1:
2405 	case CRYPTO_SHA1_HMAC:
2406 		return (SHA1_HASH_LEN);
2407 	case CRYPTO_SHA2_224:
2408 	case CRYPTO_SHA2_224_HMAC:
2409 		return (SHA2_224_HASH_LEN);
2410 	case CRYPTO_SHA2_256:
2411 	case CRYPTO_SHA2_256_HMAC:
2412 		return (SHA2_256_HASH_LEN);
2413 	case CRYPTO_SHA2_384:
2414 	case CRYPTO_SHA2_384_HMAC:
2415 		return (SHA2_384_HASH_LEN);
2416 	case CRYPTO_SHA2_512:
2417 	case CRYPTO_SHA2_512_HMAC:
2418 		return (SHA2_512_HASH_LEN);
2419 	default:
2420 		__assert_unreachable();
2421 	}
2422 }
2423 
2424 static int
2425 safexcel_sha_statelen(int alg)
2426 {
2427 	switch (alg) {
2428 	case CRYPTO_SHA1:
2429 	case CRYPTO_SHA1_HMAC:
2430 		return (SHA1_HASH_LEN);
2431 	case CRYPTO_SHA2_224:
2432 	case CRYPTO_SHA2_224_HMAC:
2433 	case CRYPTO_SHA2_256:
2434 	case CRYPTO_SHA2_256_HMAC:
2435 		return (SHA2_256_HASH_LEN);
2436 	case CRYPTO_SHA2_384:
2437 	case CRYPTO_SHA2_384_HMAC:
2438 	case CRYPTO_SHA2_512:
2439 	case CRYPTO_SHA2_512_HMAC:
2440 		return (SHA2_512_HASH_LEN);
2441 	default:
2442 		__assert_unreachable();
2443 	}
2444 }
2445 
2446 static int
2447 safexcel_newsession(device_t dev, crypto_session_t cses,
2448     const struct crypto_session_params *csp)
2449 {
2450 	struct safexcel_session *sess;
2451 	struct safexcel_softc *sc;
2452 
2453 	sc = device_get_softc(dev);
2454 	sess = crypto_get_driver_session(cses);
2455 	sess->cses = cses;
2456 
2457 	switch (csp->csp_auth_alg) {
2458 	case CRYPTO_SHA1:
2459 	case CRYPTO_SHA2_224:
2460 	case CRYPTO_SHA2_256:
2461 	case CRYPTO_SHA2_384:
2462 	case CRYPTO_SHA2_512:
2463 		sess->digest = SAFEXCEL_CONTROL0_DIGEST_PRECOMPUTED;
2464 		sess->hash = safexcel_sha_hashid(csp->csp_auth_alg);
2465 		sess->digestlen = safexcel_sha_hashlen(csp->csp_auth_alg);
2466 		sess->statelen = safexcel_sha_statelen(csp->csp_auth_alg);
2467 		break;
2468 	case CRYPTO_SHA1_HMAC:
2469 	case CRYPTO_SHA2_224_HMAC:
2470 	case CRYPTO_SHA2_256_HMAC:
2471 	case CRYPTO_SHA2_384_HMAC:
2472 	case CRYPTO_SHA2_512_HMAC:
2473 		sess->digest = SAFEXCEL_CONTROL0_DIGEST_HMAC;
2474 		sess->hash = safexcel_sha_hashid(csp->csp_auth_alg);
2475 		sess->digestlen = safexcel_sha_hashlen(csp->csp_auth_alg);
2476 		sess->statelen = safexcel_sha_statelen(csp->csp_auth_alg);
2477 		break;
2478 	case CRYPTO_AES_NIST_GMAC:
2479 		sess->digest = SAFEXCEL_CONTROL0_DIGEST_GMAC;
2480 		sess->digestlen = GMAC_DIGEST_LEN;
2481 		sess->hash = SAFEXCEL_CONTROL0_HASH_ALG_GHASH;
2482 		sess->alg = safexcel_aes_algid(csp->csp_auth_klen);
2483 		sess->mode = SAFEXCEL_CONTROL1_CRYPTO_MODE_GCM;
2484 		break;
2485 	}
2486 
2487 	switch (csp->csp_cipher_alg) {
2488 	case CRYPTO_AES_NIST_GCM_16:
2489 		sess->digest = SAFEXCEL_CONTROL0_DIGEST_GMAC;
2490 		sess->digestlen = GMAC_DIGEST_LEN;
2491 		sess->hash = SAFEXCEL_CONTROL0_HASH_ALG_GHASH;
2492 		sess->alg = safexcel_aes_algid(csp->csp_cipher_klen);
2493 		sess->mode = SAFEXCEL_CONTROL1_CRYPTO_MODE_GCM;
2494 		break;
2495 	case CRYPTO_AES_CCM_16:
2496 		sess->hash = safexcel_aes_ccm_hashid(csp->csp_cipher_klen);
2497 		sess->digest = SAFEXCEL_CONTROL0_DIGEST_CCM;
2498 		sess->digestlen = CCM_CBC_MAX_DIGEST_LEN;
2499 		sess->alg = safexcel_aes_algid(csp->csp_cipher_klen);
2500 		sess->mode = SAFEXCEL_CONTROL1_CRYPTO_MODE_CCM;
2501 		break;
2502 	case CRYPTO_AES_CBC:
2503 		sess->alg = safexcel_aes_algid(csp->csp_cipher_klen);
2504 		sess->mode = SAFEXCEL_CONTROL1_CRYPTO_MODE_CBC;
2505 		break;
2506 	case CRYPTO_AES_ICM:
2507 		sess->alg = safexcel_aes_algid(csp->csp_cipher_klen);
2508 		sess->mode = SAFEXCEL_CONTROL1_CRYPTO_MODE_CTR;
2509 		break;
2510 	case CRYPTO_AES_XTS:
2511 		sess->alg = safexcel_aes_algid(csp->csp_cipher_klen / 2);
2512 		sess->mode = SAFEXCEL_CONTROL1_CRYPTO_MODE_XTS;
2513 		break;
2514 	}
2515 
2516 	if (csp->csp_auth_mlen != 0)
2517 		sess->digestlen = csp->csp_auth_mlen;
2518 
2519 	if ((csp->csp_cipher_alg == 0 || csp->csp_cipher_key != NULL) &&
2520 	    (csp->csp_auth_alg == 0 || csp->csp_auth_key != NULL)) {
2521 		sess->encctx.len = safexcel_set_context(&sess->encctx.ctx,
2522 		    CRYPTO_OP_ENCRYPT, csp->csp_cipher_key, csp->csp_auth_key,
2523 		    sess);
2524 		sess->decctx.len = safexcel_set_context(&sess->decctx.ctx,
2525 		    CRYPTO_OP_DECRYPT, csp->csp_cipher_key, csp->csp_auth_key,
2526 		    sess);
2527 	}
2528 
2529 	return (0);
2530 }
2531 
2532 static int
2533 safexcel_process(device_t dev, struct cryptop *crp, int hint)
2534 {
2535 	const struct crypto_session_params *csp;
2536 	struct safexcel_request *req;
2537 	struct safexcel_ring *ring;
2538 	struct safexcel_session *sess;
2539 	struct safexcel_softc *sc;
2540 	int error;
2541 
2542 	sc = device_get_softc(dev);
2543 	sess = crypto_get_driver_session(crp->crp_session);
2544 	csp = crypto_get_params(crp->crp_session);
2545 
2546 	if (__predict_false(crypto_buffer_len(&crp->crp_buf) >
2547 	    SAFEXCEL_MAX_REQUEST_SIZE)) {
2548 		crp->crp_etype = E2BIG;
2549 		crypto_done(crp);
2550 		return (0);
2551 	}
2552 
2553 	ring = &sc->sc_ring[curcpu % sc->sc_config.rings];
2554 	mtx_lock(&ring->mtx);
2555 	req = safexcel_alloc_request(sc, ring);
2556 	if (__predict_false(req == NULL)) {
2557 		ring->blocked = CRYPTO_SYMQ;
2558 		mtx_unlock(&ring->mtx);
2559 		counter_u64_add(sc->sc_req_alloc_failures, 1);
2560 		return (ERESTART);
2561 	}
2562 
2563 	req->crp = crp;
2564 	req->sess = sess;
2565 
2566 	crypto_read_iv(crp, req->iv);
2567 
2568 	error = safexcel_create_chain(ring, req);
2569 	if (__predict_false(error != 0)) {
2570 		safexcel_free_request(ring, req);
2571 		if (error == ERESTART)
2572 			ring->blocked = CRYPTO_SYMQ;
2573 		mtx_unlock(&ring->mtx);
2574 		if (error != ERESTART) {
2575 			crp->crp_etype = error;
2576 			crypto_done(crp);
2577 			return (0);
2578 		} else {
2579 			return (ERESTART);
2580 		}
2581 	}
2582 
2583 	safexcel_set_token(req);
2584 
2585 	bus_dmamap_sync(ring->data_dtag, req->dmap,
2586 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2587 	bus_dmamap_sync(req->ctx.tag, req->ctx.map,
2588 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2589 	bus_dmamap_sync(ring->cdr.dma.tag, ring->cdr.dma.map,
2590 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2591 	bus_dmamap_sync(ring->dma_atok.tag, ring->dma_atok.map,
2592 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2593 	bus_dmamap_sync(ring->rdr.dma.tag, ring->rdr.dma.map,
2594 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2595 
2596 	safexcel_execute(sc, ring, req, hint);
2597 
2598 	mtx_unlock(&ring->mtx);
2599 
2600 	return (0);
2601 }
2602 
2603 static device_method_t safexcel_methods[] = {
2604 	/* Device interface */
2605 	DEVMETHOD(device_probe,		safexcel_probe),
2606 	DEVMETHOD(device_attach,	safexcel_attach),
2607 	DEVMETHOD(device_detach,	safexcel_detach),
2608 
2609 	/* Cryptodev interface */
2610 	DEVMETHOD(cryptodev_probesession, safexcel_probesession),
2611 	DEVMETHOD(cryptodev_newsession,	safexcel_newsession),
2612 	DEVMETHOD(cryptodev_process,	safexcel_process),
2613 
2614 	DEVMETHOD_END
2615 };
2616 
2617 static devclass_t safexcel_devclass;
2618 
2619 static driver_t safexcel_driver = {
2620 	.name 		= "safexcel",
2621 	.methods 	= safexcel_methods,
2622 	.size		= sizeof(struct safexcel_softc),
2623 };
2624 
2625 DRIVER_MODULE(safexcel, simplebus, safexcel_driver, safexcel_devclass, 0, 0);
2626 MODULE_VERSION(safexcel, 1);
2627 MODULE_DEPEND(safexcel, crypto, 1, 1, 1);
2628