xref: /freebsd/sys/dev/rtwn/rtl8812a/usb/r12au_init.c (revision dd21556857e8d40f66bf5ad54754d9d52669ebf7)
1 /*-
2  * Copyright (c) 2016 Andriy Voskoboinyk <avos@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 #include "opt_wlan.h"
29 
30 #include <sys/param.h>
31 #include <sys/lock.h>
32 #include <sys/mutex.h>
33 #include <sys/mbuf.h>
34 #include <sys/kernel.h>
35 #include <sys/socket.h>
36 #include <sys/systm.h>
37 #include <sys/malloc.h>
38 #include <sys/queue.h>
39 #include <sys/taskqueue.h>
40 #include <sys/bus.h>
41 #include <sys/endian.h>
42 #include <sys/linker.h>
43 
44 #include <net/if.h>
45 #include <net/ethernet.h>
46 #include <net/if_media.h>
47 
48 #include <net80211/ieee80211_var.h>
49 #include <net80211/ieee80211_radiotap.h>
50 
51 #include <dev/rtwn/if_rtwnreg.h>
52 #include <dev/rtwn/if_rtwnvar.h>
53 
54 #include <dev/rtwn/rtl8812a/r12a_var.h>
55 
56 #include <dev/rtwn/rtl8812a/usb/r12au.h>
57 #include <dev/rtwn/rtl8812a/usb/r12au_reg.h>
58 
59 void
60 r12au_init_rx_agg(struct rtwn_softc *sc)
61 {
62 	struct r12a_softc *rs = sc->sc_priv;
63 
64 	/* Rx aggregation (USB). */
65 	rtwn_write_2(sc, R92C_RXDMA_AGG_PG_TH,
66 	    rs->ac_usb_dma_size | (rs->ac_usb_dma_time << 8));
67 	rtwn_setbits_1(sc, R92C_TRXDMA_CTRL, 0,
68 	    R92C_TRXDMA_CTRL_RXDMA_AGG_EN);
69 }
70 
71 void
72 r12au_init_burstlen_usb2(struct rtwn_softc *sc)
73 {
74 	const uint8_t dma_count = R12A_DMA_MODE | SM(R12A_BURST_CNT, 3);
75 
76 	if ((rtwn_read_1(sc, R92C_USB_INFO) & 0x30) == 0) {
77 		/* Set burst packet length to 512 B. */
78 		rtwn_setbits_1(sc, R12A_RXDMA_PRO, R12A_BURST_SZ_M,
79 		    dma_count | SM(R12A_BURST_SZ, R12A_BURST_SZ_USB2));
80 	} else {
81 		/* Set burst packet length to 64 B. */
82 		rtwn_setbits_1(sc, R12A_RXDMA_PRO, R12A_BURST_SZ_M,
83 		    dma_count | SM(R12A_BURST_SZ, R12A_BURST_SZ_USB1));
84 	}
85 }
86 
87 void
88 r12au_init_burstlen(struct rtwn_softc *sc)
89 {
90 	const uint8_t dma_count = R12A_DMA_MODE | SM(R12A_BURST_CNT, 3);
91 
92 	if (rtwn_read_1(sc, R92C_TYPE_ID + 3) & 0x80)
93 		r12au_init_burstlen_usb2(sc);
94 	else {		/* USB 3.0 */
95 		/* Set burst packet length to 1 KB. */
96 		rtwn_setbits_1(sc, R12A_RXDMA_PRO, R12A_BURST_SZ_M,
97 		    dma_count | SM(R12A_BURST_SZ, R12A_BURST_SZ_USB3));
98 
99 		rtwn_setbits_1(sc, 0xf008, 0x18, 0);
100 	}
101 }
102 
103 static void
104 r12au_arfb_init(struct rtwn_softc *sc)
105 {
106 	/* ARFB table 9 for 11ac 5G 2SS. */
107 	rtwn_write_4(sc, R12A_ARFR_5G(0), 0x00000010);
108 	rtwn_write_4(sc, R12A_ARFR_5G(0) + 4, 0xfffff000);
109 
110 	/* ARFB table 10 for 11ac 5G 1SS. */
111 	rtwn_write_4(sc, R12A_ARFR_5G(1), 0x00000010);
112 	rtwn_write_4(sc, R12A_ARFR_5G(1) + 4, 0x003ff000);
113 
114 	/* ARFB table 11 for 11ac 2G 1SS. */
115 	rtwn_write_4(sc, R12A_ARFR_2G(0), 0x00000015);
116 	rtwn_write_4(sc, R12A_ARFR_2G(0) + 4, 0x003ff000);
117 
118 	/* ARFB table 12 for 11ac 2G 2SS. */
119 	rtwn_write_4(sc, R12A_ARFR_2G(1), 0x00000015);
120 	rtwn_write_4(sc, R12A_ARFR_2G(1) + 4, 0xffcff000);
121 }
122 
123 void
124 r12au_init_ampdu_fwhw(struct rtwn_softc *sc)
125 {
126 	rtwn_setbits_1(sc, R92C_FWHW_TXQ_CTRL,
127 	    R92C_FWHW_TXQ_CTRL_AMPDU_RTY_NEW, 0);
128 }
129 
130 void
131 r12au_init_ampdu(struct rtwn_softc *sc)
132 {
133 	struct r12a_softc *rs = sc->sc_priv;
134 
135 	/* Rx interval (USB3). */
136 	rtwn_write_1(sc, 0xf050, 0x01);
137 
138 	/* burst length = 4 */
139 	rtwn_write_2(sc, R92C_RXDMA_STATUS, 0x7400);
140 
141 	rtwn_write_1(sc, R92C_RXDMA_STATUS + 1, 0xf5);
142 
143 	/* Setup AMPDU aggregation. */
144 	rtwn_write_1(sc, R12A_AMPDU_MAX_TIME, rs->ampdu_max_time);
145 	/*
146 	 * Note: The vendor driver (hal/rtl8812a_hal_init.c:SetHwReg8812A())
147 	 * also sets bit 31.
148 	 */
149 	/*
150 	 * TODO: this should be limited to the peer in STA mode,
151 	 * and perhaps the minimum A-MPDU of all VAPs/peers in
152 	 * multi-STA / other operating modes.
153 	 */
154 	rtwn_write_4(sc, R12A_AMPDU_MAX_LENGTH,
155 	    rs->ampdu_max_size | (1<<31));
156 
157 	/* 80 MHz clock (again?) */
158 	rtwn_write_1(sc, R92C_USTIME_TSF, 0x50);
159 	rtwn_write_1(sc, R92C_USTIME_EDCA, 0x50);
160 
161 	rtwn_r12a_init_burstlen(sc);
162 
163 	/* Enable single packet AMPDU. */
164 	rtwn_setbits_1(sc, R12A_HT_SINGLE_AMPDU, 0,
165 	    R12A_HT_SINGLE_AMPDU_PKT_ENA);
166 
167 	/* 11K packet length for VHT. */
168 	rtwn_write_1(sc, R92C_RX_PKT_LIMIT, 0x18);
169 
170 	rtwn_write_1(sc, R92C_PIFS, 0);
171 
172 	rtwn_write_2(sc, R92C_MAX_AGGR_NUM, 0x1f1f);
173 
174 	rtwn_r12a_init_ampdu_fwhw(sc);
175 
176 	/* Do not reset MAC. */
177 	rtwn_setbits_1(sc, R92C_RSV_CTRL, 0, 0x60);
178 
179 	r12au_arfb_init(sc);
180 }
181 
182 void
183 r12au_post_init(struct rtwn_softc *sc)
184 {
185 
186 	/* Setup RTS BW (equal to data BW). */
187 	rtwn_setbits_1(sc, R92C_QUEUE_CTRL, 0x08, 0);
188 
189 	rtwn_write_1(sc, R12A_EARLY_MODE_CONTROL + 3, 0x01);
190 
191 	/* Reset USB mode switch setting. */
192 	rtwn_write_1(sc, R12A_SDIO_CTRL, 0);
193 	rtwn_write_1(sc, R92C_ACLK_MON, 0);
194 
195 	rtwn_write_1(sc, R92C_USB_HRPWM, 0);
196 
197 #ifndef RTWN_WITHOUT_UCODE
198 	if (sc->sc_flags & RTWN_FW_LOADED) {
199 		if (sc->sc_ratectl_sysctl == RTWN_RATECTL_FW) {
200 			/* TODO: implement */
201 			sc->sc_ratectl = RTWN_RATECTL_NET80211;
202 		} else
203 			sc->sc_ratectl = sc->sc_ratectl_sysctl;
204 	} else
205 #endif
206 		sc->sc_ratectl = RTWN_RATECTL_NONE;
207 }
208