1 /*- 2 * Copyright (c) 2017 Kevin Lo <kevlo@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include "opt_wlan.h" 31 32 #include <sys/param.h> 33 #include <sys/lock.h> 34 #include <sys/mutex.h> 35 #include <sys/mbuf.h> 36 #include <sys/kernel.h> 37 #include <sys/socket.h> 38 #include <sys/systm.h> 39 #include <sys/malloc.h> 40 #include <sys/queue.h> 41 #include <sys/taskqueue.h> 42 #include <sys/bus.h> 43 #include <sys/endian.h> 44 #include <sys/linker.h> 45 46 #include <net/if.h> 47 #include <net/ethernet.h> 48 #include <net/if_media.h> 49 50 #include <net80211/ieee80211_var.h> 51 #include <net80211/ieee80211_radiotap.h> 52 53 #include <dev/rtwn/if_rtwnreg.h> 54 #include <dev/rtwn/if_rtwnvar.h> 55 56 #include <dev/rtwn/if_rtwn_debug.h> 57 58 #include <dev/rtwn/rtl8188e/r88e.h> 59 #include <dev/rtwn/rtl8188e/r88e_reg.h> 60 61 #include <dev/rtwn/rtl8812a/r12a_fw_cmd.h> 62 63 #include <dev/rtwn/rtl8192e/r92e.h> 64 65 #ifndef RTWN_WITHOUT_UCODE 66 void 67 r92e_fw_reset(struct rtwn_softc *sc, int reason) 68 { 69 /* Reset MCU IO wrapper. */ 70 rtwn_setbits_1(sc, R92C_RSV_CTRL + 1, 0x01, 0); 71 72 rtwn_setbits_1_shift(sc, R92C_SYS_FUNC_EN, 73 R92C_SYS_FUNC_EN_CPUEN, 0, 1); 74 75 /* Enable MCU IO wrapper. */ 76 rtwn_setbits_1(sc, R92C_RSV_CTRL + 1, 0, 0x01); 77 78 rtwn_setbits_1_shift(sc, R92C_SYS_FUNC_EN, 79 0, R92C_SYS_FUNC_EN_CPUEN, 1); 80 } 81 82 void 83 r92e_set_media_status(struct rtwn_softc *sc, int macid) 84 { 85 struct r88e_fw_cmd_msrrpt status; 86 87 if (macid & RTWN_MACID_VALID) 88 status.msrb0 = R88E_MSRRPT_B0_ASSOC; 89 else 90 status.msrb0 = R88E_MSRRPT_B0_DISASSOC; 91 status.macid = (macid & ~RTWN_MACID_VALID); 92 93 if (r88e_fw_cmd(sc, R88E_CMD_MSR_RPT, &status, sizeof(status)) != 0) { 94 device_printf(sc->sc_dev, "%s: cannot change media status!\n", 95 __func__); 96 } 97 } 98 99 int 100 r92e_set_pwrmode(struct rtwn_softc *sc, struct ieee80211vap *vap, int off) 101 { 102 struct r12a_fw_cmd_pwrmode mode; 103 int error; 104 105 if (off && vap->iv_state == IEEE80211_S_RUN && 106 (vap->iv_flags & IEEE80211_F_PMGTON)) { 107 mode.mode = R88E_PWRMODE_LEG; 108 /* 109 * TODO: switch to RFOFF state 110 * (something is missing here - Rx stops with it). 111 */ 112 #ifdef RTWN_TODO 113 mode.pwr_state = R88E_PWRMODE_STATE_RFOFF; 114 #else 115 mode.pwr_state = R88E_PWRMODE_STATE_RFON; 116 #endif 117 } else { 118 mode.mode = R88E_PWRMODE_CAM; 119 mode.pwr_state = R88E_PWRMODE_STATE_ALLON; 120 } 121 mode.pwrb1 = 122 SM(R88E_PWRMODE_B1_SMART_PS, R88E_PWRMODE_B1_LEG_NULLDATA) | 123 SM(R88E_PWRMODE_B1_RLBM, R88E_PWRMODE_B1_MODE_MIN); 124 /* XXX ignored */ 125 mode.bcn_pass = 0; 126 mode.queue_uapsd = 0; 127 mode.pwrb5 = 0; 128 error = r88e_fw_cmd(sc, R88E_CMD_SET_PWRMODE, &mode, sizeof(mode)); 129 if (error != 0) { 130 device_printf(sc->sc_dev, 131 "%s: CMD_SET_PWRMODE was not sent, error %d\n", 132 __func__, error); 133 } 134 135 return (error); 136 } 137 #endif 138