1 /* $FreeBSD$ */ 2 3 /*- 4 * Copyright (c) 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2561, RT2561S and RT2661 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/module.h> 39 #include <sys/bus.h> 40 #include <sys/endian.h> 41 #include <sys/firmware.h> 42 43 #include <machine/bus.h> 44 #include <machine/resource.h> 45 #include <sys/rman.h> 46 47 #include <net/bpf.h> 48 #include <net/if.h> 49 #include <net/if_var.h> 50 #include <net/if_arp.h> 51 #include <net/ethernet.h> 52 #include <net/if_dl.h> 53 #include <net/if_media.h> 54 #include <net/if_types.h> 55 56 #include <net80211/ieee80211_var.h> 57 #include <net80211/ieee80211_radiotap.h> 58 #include <net80211/ieee80211_regdomain.h> 59 #include <net80211/ieee80211_ratectl.h> 60 61 #include <netinet/in.h> 62 #include <netinet/in_systm.h> 63 #include <netinet/in_var.h> 64 #include <netinet/ip.h> 65 #include <netinet/if_ether.h> 66 67 #include <dev/ral/rt2661reg.h> 68 #include <dev/ral/rt2661var.h> 69 70 #define RAL_DEBUG 71 #ifdef RAL_DEBUG 72 #define DPRINTF(sc, fmt, ...) do { \ 73 if (sc->sc_debug > 0) \ 74 printf(fmt, __VA_ARGS__); \ 75 } while (0) 76 #define DPRINTFN(sc, n, fmt, ...) do { \ 77 if (sc->sc_debug >= (n)) \ 78 printf(fmt, __VA_ARGS__); \ 79 } while (0) 80 #else 81 #define DPRINTF(sc, fmt, ...) 82 #define DPRINTFN(sc, n, fmt, ...) 83 #endif 84 85 static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *, 86 const char [IFNAMSIZ], int, enum ieee80211_opmode, 87 int, const uint8_t [IEEE80211_ADDR_LEN], 88 const uint8_t [IEEE80211_ADDR_LEN]); 89 static void rt2661_vap_delete(struct ieee80211vap *); 90 static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int, 91 int); 92 static int rt2661_alloc_tx_ring(struct rt2661_softc *, 93 struct rt2661_tx_ring *, int); 94 static void rt2661_reset_tx_ring(struct rt2661_softc *, 95 struct rt2661_tx_ring *); 96 static void rt2661_free_tx_ring(struct rt2661_softc *, 97 struct rt2661_tx_ring *); 98 static int rt2661_alloc_rx_ring(struct rt2661_softc *, 99 struct rt2661_rx_ring *, int); 100 static void rt2661_reset_rx_ring(struct rt2661_softc *, 101 struct rt2661_rx_ring *); 102 static void rt2661_free_rx_ring(struct rt2661_softc *, 103 struct rt2661_rx_ring *); 104 static int rt2661_newstate(struct ieee80211vap *, 105 enum ieee80211_state, int); 106 static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); 107 static void rt2661_rx_intr(struct rt2661_softc *); 108 static void rt2661_tx_intr(struct rt2661_softc *); 109 static void rt2661_tx_dma_intr(struct rt2661_softc *, 110 struct rt2661_tx_ring *); 111 static void rt2661_mcu_beacon_expire(struct rt2661_softc *); 112 static void rt2661_mcu_wakeup(struct rt2661_softc *); 113 static void rt2661_mcu_cmd_intr(struct rt2661_softc *); 114 static void rt2661_scan_start(struct ieee80211com *); 115 static void rt2661_scan_end(struct ieee80211com *); 116 static void rt2661_getradiocaps(struct ieee80211com *, int, int *, 117 struct ieee80211_channel[]); 118 static void rt2661_set_channel(struct ieee80211com *); 119 static void rt2661_setup_tx_desc(struct rt2661_softc *, 120 struct rt2661_tx_desc *, uint32_t, uint16_t, int, 121 int, const bus_dma_segment_t *, int, int); 122 static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, 123 struct ieee80211_node *, int); 124 static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, 125 struct ieee80211_node *); 126 static int rt2661_transmit(struct ieee80211com *, struct mbuf *); 127 static void rt2661_start(struct rt2661_softc *); 128 static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *, 129 const struct ieee80211_bpf_params *); 130 static void rt2661_watchdog(void *); 131 static void rt2661_parent(struct ieee80211com *); 132 static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, 133 uint8_t); 134 static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); 135 static void rt2661_rf_write(struct rt2661_softc *, uint8_t, 136 uint32_t); 137 static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, 138 uint16_t); 139 static void rt2661_select_antenna(struct rt2661_softc *); 140 static void rt2661_enable_mrr(struct rt2661_softc *); 141 static void rt2661_set_txpreamble(struct rt2661_softc *); 142 static void rt2661_set_basicrates(struct rt2661_softc *, 143 const struct ieee80211_rateset *); 144 static void rt2661_select_band(struct rt2661_softc *, 145 struct ieee80211_channel *); 146 static void rt2661_set_chan(struct rt2661_softc *, 147 struct ieee80211_channel *); 148 static void rt2661_set_bssid(struct rt2661_softc *, 149 const uint8_t *); 150 static void rt2661_set_macaddr(struct rt2661_softc *, 151 const uint8_t *); 152 static void rt2661_update_promisc(struct ieee80211com *); 153 static int rt2661_wme_update(struct ieee80211com *) __unused; 154 static void rt2661_update_slot(struct ieee80211com *); 155 static const char *rt2661_get_rf(int); 156 static void rt2661_read_eeprom(struct rt2661_softc *, 157 uint8_t macaddr[IEEE80211_ADDR_LEN]); 158 static int rt2661_bbp_init(struct rt2661_softc *); 159 static void rt2661_init_locked(struct rt2661_softc *); 160 static void rt2661_init(void *); 161 static void rt2661_stop_locked(struct rt2661_softc *); 162 static void rt2661_stop(void *); 163 static int rt2661_load_microcode(struct rt2661_softc *); 164 #ifdef notyet 165 static void rt2661_rx_tune(struct rt2661_softc *); 166 static void rt2661_radar_start(struct rt2661_softc *); 167 static int rt2661_radar_stop(struct rt2661_softc *); 168 #endif 169 static int rt2661_prepare_beacon(struct rt2661_softc *, 170 struct ieee80211vap *); 171 static void rt2661_enable_tsf_sync(struct rt2661_softc *); 172 static void rt2661_enable_tsf(struct rt2661_softc *); 173 static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); 174 175 static const struct { 176 uint32_t reg; 177 uint32_t val; 178 } rt2661_def_mac[] = { 179 RT2661_DEF_MAC 180 }; 181 182 static const struct { 183 uint8_t reg; 184 uint8_t val; 185 } rt2661_def_bbp[] = { 186 RT2661_DEF_BBP 187 }; 188 189 static const struct rfprog { 190 uint8_t chan; 191 uint32_t r1, r2, r3, r4; 192 } rt2661_rf5225_1[] = { 193 RT2661_RF5225_1 194 }, rt2661_rf5225_2[] = { 195 RT2661_RF5225_2 196 }; 197 198 static const uint8_t rt2661_chan_5ghz[] = 199 { 36, 40, 44, 48, 52, 56, 60, 64, 200 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 201 149, 153, 157, 161, 165 }; 202 203 int 204 rt2661_attach(device_t dev, int id) 205 { 206 struct rt2661_softc *sc = device_get_softc(dev); 207 struct ieee80211com *ic = &sc->sc_ic; 208 uint32_t val; 209 int error, ac, ntries; 210 211 sc->sc_id = id; 212 sc->sc_dev = dev; 213 214 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 215 MTX_DEF | MTX_RECURSE); 216 217 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 218 mbufq_init(&sc->sc_snd, ifqmaxlen); 219 220 /* wait for NIC to initialize */ 221 for (ntries = 0; ntries < 1000; ntries++) { 222 if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) 223 break; 224 DELAY(1000); 225 } 226 if (ntries == 1000) { 227 device_printf(sc->sc_dev, 228 "timeout waiting for NIC to initialize\n"); 229 error = EIO; 230 goto fail1; 231 } 232 233 /* retrieve RF rev. no and various other things from EEPROM */ 234 rt2661_read_eeprom(sc, ic->ic_macaddr); 235 236 device_printf(dev, "MAC/BBP RT%X, RF %s\n", val, 237 rt2661_get_rf(sc->rf_rev)); 238 239 /* 240 * Allocate Tx and Rx rings. 241 */ 242 for (ac = 0; ac < 4; ac++) { 243 error = rt2661_alloc_tx_ring(sc, &sc->txq[ac], 244 RT2661_TX_RING_COUNT); 245 if (error != 0) { 246 device_printf(sc->sc_dev, 247 "could not allocate Tx ring %d\n", ac); 248 goto fail2; 249 } 250 } 251 252 error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); 253 if (error != 0) { 254 device_printf(sc->sc_dev, "could not allocate Mgt ring\n"); 255 goto fail2; 256 } 257 258 error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); 259 if (error != 0) { 260 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 261 goto fail3; 262 } 263 264 ic->ic_softc = sc; 265 ic->ic_name = device_get_nameunit(dev); 266 ic->ic_opmode = IEEE80211_M_STA; 267 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 268 269 /* set device capabilities */ 270 ic->ic_caps = 271 IEEE80211_C_STA /* station mode */ 272 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 273 | IEEE80211_C_HOSTAP /* hostap mode */ 274 | IEEE80211_C_MONITOR /* monitor mode */ 275 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 276 | IEEE80211_C_WDS /* 4-address traffic works */ 277 | IEEE80211_C_MBSS /* mesh point link mode */ 278 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 279 | IEEE80211_C_SHSLOT /* short slot time supported */ 280 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 281 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 282 #ifdef notyet 283 | IEEE80211_C_TXFRAG /* handle tx frags */ 284 | IEEE80211_C_WME /* 802.11e */ 285 #endif 286 ; 287 288 rt2661_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 289 ic->ic_channels); 290 291 ieee80211_ifattach(ic); 292 #if 0 293 ic->ic_wme.wme_update = rt2661_wme_update; 294 #endif 295 ic->ic_scan_start = rt2661_scan_start; 296 ic->ic_scan_end = rt2661_scan_end; 297 ic->ic_getradiocaps = rt2661_getradiocaps; 298 ic->ic_set_channel = rt2661_set_channel; 299 ic->ic_updateslot = rt2661_update_slot; 300 ic->ic_update_promisc = rt2661_update_promisc; 301 ic->ic_raw_xmit = rt2661_raw_xmit; 302 ic->ic_transmit = rt2661_transmit; 303 ic->ic_parent = rt2661_parent; 304 ic->ic_vap_create = rt2661_vap_create; 305 ic->ic_vap_delete = rt2661_vap_delete; 306 307 ieee80211_radiotap_attach(ic, 308 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 309 RT2661_TX_RADIOTAP_PRESENT, 310 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 311 RT2661_RX_RADIOTAP_PRESENT); 312 313 #ifdef RAL_DEBUG 314 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 315 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 316 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 317 #endif 318 if (bootverbose) 319 ieee80211_announce(ic); 320 321 return 0; 322 323 fail3: rt2661_free_tx_ring(sc, &sc->mgtq); 324 fail2: while (--ac >= 0) 325 rt2661_free_tx_ring(sc, &sc->txq[ac]); 326 fail1: mtx_destroy(&sc->sc_mtx); 327 return error; 328 } 329 330 int 331 rt2661_detach(void *xsc) 332 { 333 struct rt2661_softc *sc = xsc; 334 struct ieee80211com *ic = &sc->sc_ic; 335 336 RAL_LOCK(sc); 337 rt2661_stop_locked(sc); 338 RAL_UNLOCK(sc); 339 340 ieee80211_ifdetach(ic); 341 mbufq_drain(&sc->sc_snd); 342 343 rt2661_free_tx_ring(sc, &sc->txq[0]); 344 rt2661_free_tx_ring(sc, &sc->txq[1]); 345 rt2661_free_tx_ring(sc, &sc->txq[2]); 346 rt2661_free_tx_ring(sc, &sc->txq[3]); 347 rt2661_free_tx_ring(sc, &sc->mgtq); 348 rt2661_free_rx_ring(sc, &sc->rxq); 349 350 mtx_destroy(&sc->sc_mtx); 351 352 return 0; 353 } 354 355 static struct ieee80211vap * 356 rt2661_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 357 enum ieee80211_opmode opmode, int flags, 358 const uint8_t bssid[IEEE80211_ADDR_LEN], 359 const uint8_t mac[IEEE80211_ADDR_LEN]) 360 { 361 struct rt2661_softc *sc = ic->ic_softc; 362 struct rt2661_vap *rvp; 363 struct ieee80211vap *vap; 364 365 switch (opmode) { 366 case IEEE80211_M_STA: 367 case IEEE80211_M_IBSS: 368 case IEEE80211_M_AHDEMO: 369 case IEEE80211_M_MONITOR: 370 case IEEE80211_M_HOSTAP: 371 case IEEE80211_M_MBSS: 372 /* XXXRP: TBD */ 373 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 374 device_printf(sc->sc_dev, "only 1 vap supported\n"); 375 return NULL; 376 } 377 if (opmode == IEEE80211_M_STA) 378 flags |= IEEE80211_CLONE_NOBEACONS; 379 break; 380 case IEEE80211_M_WDS: 381 if (TAILQ_EMPTY(&ic->ic_vaps) || 382 ic->ic_opmode != IEEE80211_M_HOSTAP) { 383 device_printf(sc->sc_dev, 384 "wds only supported in ap mode\n"); 385 return NULL; 386 } 387 /* 388 * Silently remove any request for a unique 389 * bssid; WDS vap's always share the local 390 * mac address. 391 */ 392 flags &= ~IEEE80211_CLONE_BSSID; 393 break; 394 default: 395 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 396 return NULL; 397 } 398 rvp = malloc(sizeof(struct rt2661_vap), M_80211_VAP, M_WAITOK | M_ZERO); 399 vap = &rvp->ral_vap; 400 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 401 402 /* override state transition machine */ 403 rvp->ral_newstate = vap->iv_newstate; 404 vap->iv_newstate = rt2661_newstate; 405 #if 0 406 vap->iv_update_beacon = rt2661_beacon_update; 407 #endif 408 409 ieee80211_ratectl_init(vap); 410 /* complete setup */ 411 ieee80211_vap_attach(vap, ieee80211_media_change, 412 ieee80211_media_status, mac); 413 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 414 ic->ic_opmode = opmode; 415 return vap; 416 } 417 418 static void 419 rt2661_vap_delete(struct ieee80211vap *vap) 420 { 421 struct rt2661_vap *rvp = RT2661_VAP(vap); 422 423 ieee80211_ratectl_deinit(vap); 424 ieee80211_vap_detach(vap); 425 free(rvp, M_80211_VAP); 426 } 427 428 void 429 rt2661_shutdown(void *xsc) 430 { 431 struct rt2661_softc *sc = xsc; 432 433 rt2661_stop(sc); 434 } 435 436 void 437 rt2661_suspend(void *xsc) 438 { 439 struct rt2661_softc *sc = xsc; 440 441 rt2661_stop(sc); 442 } 443 444 void 445 rt2661_resume(void *xsc) 446 { 447 struct rt2661_softc *sc = xsc; 448 449 if (sc->sc_ic.ic_nrunning > 0) 450 rt2661_init(sc); 451 } 452 453 static void 454 rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 455 { 456 if (error != 0) 457 return; 458 459 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 460 461 *(bus_addr_t *)arg = segs[0].ds_addr; 462 } 463 464 static int 465 rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, 466 int count) 467 { 468 int i, error; 469 470 ring->count = count; 471 ring->queued = 0; 472 ring->cur = ring->next = ring->stat = 0; 473 474 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 475 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 476 count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 477 0, NULL, NULL, &ring->desc_dmat); 478 if (error != 0) { 479 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 480 goto fail; 481 } 482 483 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 484 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 485 if (error != 0) { 486 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 487 goto fail; 488 } 489 490 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 491 count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 492 0); 493 if (error != 0) { 494 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 495 goto fail; 496 } 497 498 ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, 499 M_NOWAIT | M_ZERO); 500 if (ring->data == NULL) { 501 device_printf(sc->sc_dev, "could not allocate soft data\n"); 502 error = ENOMEM; 503 goto fail; 504 } 505 506 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 507 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 508 RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 509 if (error != 0) { 510 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 511 goto fail; 512 } 513 514 for (i = 0; i < count; i++) { 515 error = bus_dmamap_create(ring->data_dmat, 0, 516 &ring->data[i].map); 517 if (error != 0) { 518 device_printf(sc->sc_dev, "could not create DMA map\n"); 519 goto fail; 520 } 521 } 522 523 return 0; 524 525 fail: rt2661_free_tx_ring(sc, ring); 526 return error; 527 } 528 529 static void 530 rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 531 { 532 struct rt2661_tx_desc *desc; 533 struct rt2661_tx_data *data; 534 int i; 535 536 for (i = 0; i < ring->count; i++) { 537 desc = &ring->desc[i]; 538 data = &ring->data[i]; 539 540 if (data->m != NULL) { 541 bus_dmamap_sync(ring->data_dmat, data->map, 542 BUS_DMASYNC_POSTWRITE); 543 bus_dmamap_unload(ring->data_dmat, data->map); 544 m_freem(data->m); 545 data->m = NULL; 546 } 547 548 if (data->ni != NULL) { 549 ieee80211_free_node(data->ni); 550 data->ni = NULL; 551 } 552 553 desc->flags = 0; 554 } 555 556 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 557 558 ring->queued = 0; 559 ring->cur = ring->next = ring->stat = 0; 560 } 561 562 static void 563 rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 564 { 565 struct rt2661_tx_data *data; 566 int i; 567 568 if (ring->desc != NULL) { 569 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 570 BUS_DMASYNC_POSTWRITE); 571 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 572 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 573 } 574 575 if (ring->desc_dmat != NULL) 576 bus_dma_tag_destroy(ring->desc_dmat); 577 578 if (ring->data != NULL) { 579 for (i = 0; i < ring->count; i++) { 580 data = &ring->data[i]; 581 582 if (data->m != NULL) { 583 bus_dmamap_sync(ring->data_dmat, data->map, 584 BUS_DMASYNC_POSTWRITE); 585 bus_dmamap_unload(ring->data_dmat, data->map); 586 m_freem(data->m); 587 } 588 589 if (data->ni != NULL) 590 ieee80211_free_node(data->ni); 591 592 if (data->map != NULL) 593 bus_dmamap_destroy(ring->data_dmat, data->map); 594 } 595 596 free(ring->data, M_DEVBUF); 597 } 598 599 if (ring->data_dmat != NULL) 600 bus_dma_tag_destroy(ring->data_dmat); 601 } 602 603 static int 604 rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, 605 int count) 606 { 607 struct rt2661_rx_desc *desc; 608 struct rt2661_rx_data *data; 609 bus_addr_t physaddr; 610 int i, error; 611 612 ring->count = count; 613 ring->cur = ring->next = 0; 614 615 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 616 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 617 count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 618 0, NULL, NULL, &ring->desc_dmat); 619 if (error != 0) { 620 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 621 goto fail; 622 } 623 624 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 625 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 626 if (error != 0) { 627 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 628 goto fail; 629 } 630 631 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 632 count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 633 0); 634 if (error != 0) { 635 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 636 goto fail; 637 } 638 639 ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, 640 M_NOWAIT | M_ZERO); 641 if (ring->data == NULL) { 642 device_printf(sc->sc_dev, "could not allocate soft data\n"); 643 error = ENOMEM; 644 goto fail; 645 } 646 647 /* 648 * Pre-allocate Rx buffers and populate Rx ring. 649 */ 650 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 651 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 652 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 653 if (error != 0) { 654 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 655 goto fail; 656 } 657 658 for (i = 0; i < count; i++) { 659 desc = &sc->rxq.desc[i]; 660 data = &sc->rxq.data[i]; 661 662 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 663 if (error != 0) { 664 device_printf(sc->sc_dev, "could not create DMA map\n"); 665 goto fail; 666 } 667 668 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 669 if (data->m == NULL) { 670 device_printf(sc->sc_dev, 671 "could not allocate rx mbuf\n"); 672 error = ENOMEM; 673 goto fail; 674 } 675 676 error = bus_dmamap_load(ring->data_dmat, data->map, 677 mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, 678 &physaddr, 0); 679 if (error != 0) { 680 device_printf(sc->sc_dev, 681 "could not load rx buf DMA map"); 682 goto fail; 683 } 684 685 desc->flags = htole32(RT2661_RX_BUSY); 686 desc->physaddr = htole32(physaddr); 687 } 688 689 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 690 691 return 0; 692 693 fail: rt2661_free_rx_ring(sc, ring); 694 return error; 695 } 696 697 static void 698 rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 699 { 700 int i; 701 702 for (i = 0; i < ring->count; i++) 703 ring->desc[i].flags = htole32(RT2661_RX_BUSY); 704 705 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 706 707 ring->cur = ring->next = 0; 708 } 709 710 static void 711 rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 712 { 713 struct rt2661_rx_data *data; 714 int i; 715 716 if (ring->desc != NULL) { 717 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 718 BUS_DMASYNC_POSTWRITE); 719 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 720 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 721 } 722 723 if (ring->desc_dmat != NULL) 724 bus_dma_tag_destroy(ring->desc_dmat); 725 726 if (ring->data != NULL) { 727 for (i = 0; i < ring->count; i++) { 728 data = &ring->data[i]; 729 730 if (data->m != NULL) { 731 bus_dmamap_sync(ring->data_dmat, data->map, 732 BUS_DMASYNC_POSTREAD); 733 bus_dmamap_unload(ring->data_dmat, data->map); 734 m_freem(data->m); 735 } 736 737 if (data->map != NULL) 738 bus_dmamap_destroy(ring->data_dmat, data->map); 739 } 740 741 free(ring->data, M_DEVBUF); 742 } 743 744 if (ring->data_dmat != NULL) 745 bus_dma_tag_destroy(ring->data_dmat); 746 } 747 748 static int 749 rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 750 { 751 struct rt2661_vap *rvp = RT2661_VAP(vap); 752 struct ieee80211com *ic = vap->iv_ic; 753 struct rt2661_softc *sc = ic->ic_softc; 754 int error; 755 756 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 757 uint32_t tmp; 758 759 /* abort TSF synchronization */ 760 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 761 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); 762 } 763 764 error = rvp->ral_newstate(vap, nstate, arg); 765 766 if (error == 0 && nstate == IEEE80211_S_RUN) { 767 struct ieee80211_node *ni = vap->iv_bss; 768 769 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 770 rt2661_enable_mrr(sc); 771 rt2661_set_txpreamble(sc); 772 rt2661_set_basicrates(sc, &ni->ni_rates); 773 rt2661_set_bssid(sc, ni->ni_bssid); 774 } 775 776 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 777 vap->iv_opmode == IEEE80211_M_IBSS || 778 vap->iv_opmode == IEEE80211_M_MBSS) { 779 error = rt2661_prepare_beacon(sc, vap); 780 if (error != 0) 781 return error; 782 } 783 if (vap->iv_opmode != IEEE80211_M_MONITOR) 784 rt2661_enable_tsf_sync(sc); 785 else 786 rt2661_enable_tsf(sc); 787 } 788 return error; 789 } 790 791 /* 792 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 793 * 93C66). 794 */ 795 static uint16_t 796 rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) 797 { 798 uint32_t tmp; 799 uint16_t val; 800 int n; 801 802 /* clock C once before the first command */ 803 RT2661_EEPROM_CTL(sc, 0); 804 805 RT2661_EEPROM_CTL(sc, RT2661_S); 806 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 807 RT2661_EEPROM_CTL(sc, RT2661_S); 808 809 /* write start bit (1) */ 810 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 811 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 812 813 /* write READ opcode (10) */ 814 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 815 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 816 RT2661_EEPROM_CTL(sc, RT2661_S); 817 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 818 819 /* write address (A5-A0 or A7-A0) */ 820 n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; 821 for (; n >= 0; n--) { 822 RT2661_EEPROM_CTL(sc, RT2661_S | 823 (((addr >> n) & 1) << RT2661_SHIFT_D)); 824 RT2661_EEPROM_CTL(sc, RT2661_S | 825 (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); 826 } 827 828 RT2661_EEPROM_CTL(sc, RT2661_S); 829 830 /* read data Q15-Q0 */ 831 val = 0; 832 for (n = 15; n >= 0; n--) { 833 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 834 tmp = RAL_READ(sc, RT2661_E2PROM_CSR); 835 val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; 836 RT2661_EEPROM_CTL(sc, RT2661_S); 837 } 838 839 RT2661_EEPROM_CTL(sc, 0); 840 841 /* clear Chip Select and clock C */ 842 RT2661_EEPROM_CTL(sc, RT2661_S); 843 RT2661_EEPROM_CTL(sc, 0); 844 RT2661_EEPROM_CTL(sc, RT2661_C); 845 846 return val; 847 } 848 849 static void 850 rt2661_tx_intr(struct rt2661_softc *sc) 851 { 852 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs; 853 struct rt2661_tx_ring *txq; 854 struct rt2661_tx_data *data; 855 uint32_t val; 856 int error, qid; 857 858 txs->flags = IEEE80211_RATECTL_TX_FAIL_LONG; 859 for (;;) { 860 struct ieee80211_node *ni; 861 struct mbuf *m; 862 863 val = RAL_READ(sc, RT2661_STA_CSR4); 864 if (!(val & RT2661_TX_STAT_VALID)) 865 break; 866 867 /* retrieve the queue in which this frame was sent */ 868 qid = RT2661_TX_QID(val); 869 txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; 870 871 /* retrieve rate control algorithm context */ 872 data = &txq->data[txq->stat]; 873 m = data->m; 874 data->m = NULL; 875 ni = data->ni; 876 data->ni = NULL; 877 878 /* if no frame has been sent, ignore */ 879 if (ni == NULL) 880 continue; 881 882 switch (RT2661_TX_RESULT(val)) { 883 case RT2661_TX_SUCCESS: 884 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 885 txs->long_retries = RT2661_TX_RETRYCNT(val); 886 887 DPRINTFN(sc, 10, "data frame sent successfully after " 888 "%d retries\n", txs->long_retries); 889 if (data->rix != IEEE80211_FIXED_RATE_NONE) 890 ieee80211_ratectl_tx_complete(ni, txs); 891 error = 0; 892 break; 893 894 case RT2661_TX_RETRY_FAIL: 895 txs->status = IEEE80211_RATECTL_TX_FAIL_LONG; 896 txs->long_retries = RT2661_TX_RETRYCNT(val); 897 898 DPRINTFN(sc, 9, "%s\n", 899 "sending data frame failed (too much retries)"); 900 if (data->rix != IEEE80211_FIXED_RATE_NONE) 901 ieee80211_ratectl_tx_complete(ni, txs); 902 error = 1; 903 break; 904 905 default: 906 /* other failure */ 907 device_printf(sc->sc_dev, 908 "sending data frame failed 0x%08x\n", val); 909 error = 1; 910 } 911 912 DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat); 913 914 txq->queued--; 915 if (++txq->stat >= txq->count) /* faster than % count */ 916 txq->stat = 0; 917 918 ieee80211_tx_complete(ni, m, error); 919 } 920 921 sc->sc_tx_timer = 0; 922 923 rt2661_start(sc); 924 } 925 926 static void 927 rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) 928 { 929 struct rt2661_tx_desc *desc; 930 struct rt2661_tx_data *data; 931 932 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD); 933 934 for (;;) { 935 desc = &txq->desc[txq->next]; 936 data = &txq->data[txq->next]; 937 938 if ((le32toh(desc->flags) & RT2661_TX_BUSY) || 939 !(le32toh(desc->flags) & RT2661_TX_VALID)) 940 break; 941 942 bus_dmamap_sync(txq->data_dmat, data->map, 943 BUS_DMASYNC_POSTWRITE); 944 bus_dmamap_unload(txq->data_dmat, data->map); 945 946 /* descriptor is no longer valid */ 947 desc->flags &= ~htole32(RT2661_TX_VALID); 948 949 DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next); 950 951 if (++txq->next >= txq->count) /* faster than % count */ 952 txq->next = 0; 953 } 954 955 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 956 } 957 958 static void 959 rt2661_rx_intr(struct rt2661_softc *sc) 960 { 961 struct epoch_tracker et; 962 struct ieee80211com *ic = &sc->sc_ic; 963 struct rt2661_rx_desc *desc; 964 struct rt2661_rx_data *data; 965 bus_addr_t physaddr; 966 struct ieee80211_frame *wh; 967 struct ieee80211_node *ni; 968 struct mbuf *mnew, *m; 969 int error; 970 971 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 972 BUS_DMASYNC_POSTREAD); 973 974 for (;;) { 975 int8_t rssi, nf; 976 977 desc = &sc->rxq.desc[sc->rxq.cur]; 978 data = &sc->rxq.data[sc->rxq.cur]; 979 980 if (le32toh(desc->flags) & RT2661_RX_BUSY) 981 break; 982 983 if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || 984 (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { 985 /* 986 * This should not happen since we did not request 987 * to receive those frames when we filled TXRX_CSR0. 988 */ 989 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 990 le32toh(desc->flags)); 991 counter_u64_add(ic->ic_ierrors, 1); 992 goto skip; 993 } 994 995 if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { 996 counter_u64_add(ic->ic_ierrors, 1); 997 goto skip; 998 } 999 1000 /* 1001 * Try to allocate a new mbuf for this ring element and load it 1002 * before processing the current mbuf. If the ring element 1003 * cannot be loaded, drop the received packet and reuse the old 1004 * mbuf. In the unlikely case that the old mbuf can't be 1005 * reloaded either, explicitly panic. 1006 */ 1007 mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1008 if (mnew == NULL) { 1009 counter_u64_add(ic->ic_ierrors, 1); 1010 goto skip; 1011 } 1012 1013 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1014 BUS_DMASYNC_POSTREAD); 1015 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1016 1017 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1018 mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr, 1019 &physaddr, 0); 1020 if (error != 0) { 1021 m_freem(mnew); 1022 1023 /* try to reload the old mbuf */ 1024 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1025 mtod(data->m, void *), MCLBYTES, 1026 rt2661_dma_map_addr, &physaddr, 0); 1027 if (error != 0) { 1028 /* very unlikely that it will fail... */ 1029 panic("%s: could not load old rx mbuf", 1030 device_get_name(sc->sc_dev)); 1031 } 1032 counter_u64_add(ic->ic_ierrors, 1); 1033 goto skip; 1034 } 1035 1036 /* 1037 * New mbuf successfully loaded, update Rx ring and continue 1038 * processing. 1039 */ 1040 m = data->m; 1041 data->m = mnew; 1042 desc->physaddr = htole32(physaddr); 1043 1044 /* finalize mbuf */ 1045 m->m_pkthdr.len = m->m_len = 1046 (le32toh(desc->flags) >> 16) & 0xfff; 1047 1048 rssi = rt2661_get_rssi(sc, desc->rssi); 1049 /* Error happened during RSSI conversion. */ 1050 if (rssi < 0) 1051 rssi = -30; /* XXX ignored by net80211 */ 1052 nf = RT2661_NOISE_FLOOR; 1053 1054 if (ieee80211_radiotap_active(ic)) { 1055 struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; 1056 uint32_t tsf_lo, tsf_hi; 1057 1058 /* get timestamp (low and high 32 bits) */ 1059 tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); 1060 tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); 1061 1062 tap->wr_tsf = 1063 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1064 tap->wr_flags = 0; 1065 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1066 (desc->flags & htole32(RT2661_RX_OFDM)) ? 1067 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1068 tap->wr_antsignal = nf + rssi; 1069 tap->wr_antnoise = nf; 1070 } 1071 sc->sc_flags |= RAL_INPUT_RUNNING; 1072 RAL_UNLOCK(sc); 1073 wh = mtod(m, struct ieee80211_frame *); 1074 1075 /* send the frame to the 802.11 layer */ 1076 ni = ieee80211_find_rxnode(ic, 1077 (struct ieee80211_frame_min *)wh); 1078 NET_EPOCH_ENTER(et); 1079 if (ni != NULL) { 1080 (void) ieee80211_input(ni, m, rssi, nf); 1081 ieee80211_free_node(ni); 1082 } else 1083 (void) ieee80211_input_all(ic, m, rssi, nf); 1084 NET_EPOCH_EXIT(et); 1085 1086 RAL_LOCK(sc); 1087 sc->sc_flags &= ~RAL_INPUT_RUNNING; 1088 1089 skip: desc->flags |= htole32(RT2661_RX_BUSY); 1090 1091 DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur); 1092 1093 sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; 1094 } 1095 1096 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1097 BUS_DMASYNC_PREWRITE); 1098 } 1099 1100 /* ARGSUSED */ 1101 static void 1102 rt2661_mcu_beacon_expire(struct rt2661_softc *sc) 1103 { 1104 /* do nothing */ 1105 } 1106 1107 static void 1108 rt2661_mcu_wakeup(struct rt2661_softc *sc) 1109 { 1110 RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); 1111 1112 RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); 1113 RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); 1114 RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); 1115 1116 /* send wakeup command to MCU */ 1117 rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); 1118 } 1119 1120 static void 1121 rt2661_mcu_cmd_intr(struct rt2661_softc *sc) 1122 { 1123 RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); 1124 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 1125 } 1126 1127 void 1128 rt2661_intr(void *arg) 1129 { 1130 struct rt2661_softc *sc = arg; 1131 uint32_t r1, r2; 1132 1133 RAL_LOCK(sc); 1134 1135 /* disable MAC and MCU interrupts */ 1136 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 1137 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 1138 1139 /* don't re-enable interrupts if we're shutting down */ 1140 if (!(sc->sc_flags & RAL_RUNNING)) { 1141 RAL_UNLOCK(sc); 1142 return; 1143 } 1144 1145 r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); 1146 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); 1147 1148 r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); 1149 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); 1150 1151 if (r1 & RT2661_MGT_DONE) 1152 rt2661_tx_dma_intr(sc, &sc->mgtq); 1153 1154 if (r1 & RT2661_RX_DONE) 1155 rt2661_rx_intr(sc); 1156 1157 if (r1 & RT2661_TX0_DMA_DONE) 1158 rt2661_tx_dma_intr(sc, &sc->txq[0]); 1159 1160 if (r1 & RT2661_TX1_DMA_DONE) 1161 rt2661_tx_dma_intr(sc, &sc->txq[1]); 1162 1163 if (r1 & RT2661_TX2_DMA_DONE) 1164 rt2661_tx_dma_intr(sc, &sc->txq[2]); 1165 1166 if (r1 & RT2661_TX3_DMA_DONE) 1167 rt2661_tx_dma_intr(sc, &sc->txq[3]); 1168 1169 if (r1 & RT2661_TX_DONE) 1170 rt2661_tx_intr(sc); 1171 1172 if (r2 & RT2661_MCU_CMD_DONE) 1173 rt2661_mcu_cmd_intr(sc); 1174 1175 if (r2 & RT2661_MCU_BEACON_EXPIRE) 1176 rt2661_mcu_beacon_expire(sc); 1177 1178 if (r2 & RT2661_MCU_WAKEUP) 1179 rt2661_mcu_wakeup(sc); 1180 1181 /* re-enable MAC and MCU interrupts */ 1182 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 1183 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 1184 1185 RAL_UNLOCK(sc); 1186 } 1187 1188 static uint8_t 1189 rt2661_plcp_signal(int rate) 1190 { 1191 switch (rate) { 1192 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1193 case 12: return 0xb; 1194 case 18: return 0xf; 1195 case 24: return 0xa; 1196 case 36: return 0xe; 1197 case 48: return 0x9; 1198 case 72: return 0xd; 1199 case 96: return 0x8; 1200 case 108: return 0xc; 1201 1202 /* CCK rates (NB: not IEEE std, device-specific) */ 1203 case 2: return 0x0; 1204 case 4: return 0x1; 1205 case 11: return 0x2; 1206 case 22: return 0x3; 1207 } 1208 return 0xff; /* XXX unsupported/unknown rate */ 1209 } 1210 1211 static void 1212 rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, 1213 uint32_t flags, uint16_t xflags, int len, int rate, 1214 const bus_dma_segment_t *segs, int nsegs, int ac) 1215 { 1216 struct ieee80211com *ic = &sc->sc_ic; 1217 uint16_t plcp_length; 1218 int i, remainder; 1219 1220 desc->flags = htole32(flags); 1221 desc->flags |= htole32(len << 16); 1222 desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); 1223 1224 desc->xflags = htole16(xflags); 1225 desc->xflags |= htole16(nsegs << 13); 1226 1227 desc->wme = htole16( 1228 RT2661_QID(ac) | 1229 RT2661_AIFSN(2) | 1230 RT2661_LOGCWMIN(4) | 1231 RT2661_LOGCWMAX(10)); 1232 1233 /* 1234 * Remember in which queue this frame was sent. This field is driver 1235 * private data only. It will be made available by the NIC in STA_CSR4 1236 * on Tx interrupts. 1237 */ 1238 desc->qid = ac; 1239 1240 /* setup PLCP fields */ 1241 desc->plcp_signal = rt2661_plcp_signal(rate); 1242 desc->plcp_service = 4; 1243 1244 len += IEEE80211_CRC_LEN; 1245 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { 1246 desc->flags |= htole32(RT2661_TX_OFDM); 1247 1248 plcp_length = len & 0xfff; 1249 desc->plcp_length_hi = plcp_length >> 6; 1250 desc->plcp_length_lo = plcp_length & 0x3f; 1251 } else { 1252 plcp_length = howmany(16 * len, rate); 1253 if (rate == 22) { 1254 remainder = (16 * len) % 22; 1255 if (remainder != 0 && remainder < 7) 1256 desc->plcp_service |= RT2661_PLCP_LENGEXT; 1257 } 1258 desc->plcp_length_hi = plcp_length >> 8; 1259 desc->plcp_length_lo = plcp_length & 0xff; 1260 1261 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1262 desc->plcp_signal |= 0x08; 1263 } 1264 1265 /* RT2x61 supports scatter with up to 5 segments */ 1266 for (i = 0; i < nsegs; i++) { 1267 desc->addr[i] = htole32(segs[i].ds_addr); 1268 desc->len [i] = htole16(segs[i].ds_len); 1269 } 1270 } 1271 1272 static int 1273 rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, 1274 struct ieee80211_node *ni) 1275 { 1276 struct ieee80211vap *vap = ni->ni_vap; 1277 struct ieee80211com *ic = ni->ni_ic; 1278 struct rt2661_tx_desc *desc; 1279 struct rt2661_tx_data *data; 1280 struct ieee80211_frame *wh; 1281 struct ieee80211_key *k; 1282 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1283 uint16_t dur; 1284 uint32_t flags = 0; /* XXX HWSEQ */ 1285 int nsegs, rate, error; 1286 1287 desc = &sc->mgtq.desc[sc->mgtq.cur]; 1288 data = &sc->mgtq.data[sc->mgtq.cur]; 1289 1290 rate = ni->ni_txparms->mgmtrate; 1291 1292 wh = mtod(m0, struct ieee80211_frame *); 1293 1294 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1295 k = ieee80211_crypto_encap(ni, m0); 1296 if (k == NULL) { 1297 m_freem(m0); 1298 return ENOBUFS; 1299 } 1300 } 1301 1302 error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0, 1303 segs, &nsegs, 0); 1304 if (error != 0) { 1305 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1306 error); 1307 m_freem(m0); 1308 return error; 1309 } 1310 1311 if (ieee80211_radiotap_active_vap(vap)) { 1312 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1313 1314 tap->wt_flags = 0; 1315 tap->wt_rate = rate; 1316 1317 ieee80211_radiotap_tx(vap, m0); 1318 } 1319 1320 data->m = m0; 1321 data->ni = ni; 1322 /* management frames are not taken into account for amrr */ 1323 data->rix = IEEE80211_FIXED_RATE_NONE; 1324 1325 wh = mtod(m0, struct ieee80211_frame *); 1326 1327 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1328 flags |= RT2661_TX_NEED_ACK; 1329 1330 dur = ieee80211_ack_duration(ic->ic_rt, 1331 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1332 *(uint16_t *)wh->i_dur = htole16(dur); 1333 1334 /* tell hardware to add timestamp in probe responses */ 1335 if ((wh->i_fc[0] & 1336 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1337 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1338 flags |= RT2661_TX_TIMESTAMP; 1339 } 1340 1341 rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, 1342 m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT); 1343 1344 bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1345 bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map, 1346 BUS_DMASYNC_PREWRITE); 1347 1348 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1349 m0->m_pkthdr.len, sc->mgtq.cur, rate); 1350 1351 /* kick mgt */ 1352 sc->mgtq.queued++; 1353 sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; 1354 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); 1355 1356 return 0; 1357 } 1358 1359 static int 1360 rt2661_sendprot(struct rt2661_softc *sc, int ac, 1361 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1362 { 1363 struct ieee80211com *ic = ni->ni_ic; 1364 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1365 struct rt2661_tx_desc *desc; 1366 struct rt2661_tx_data *data; 1367 struct mbuf *mprot; 1368 int protrate, flags, error; 1369 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1370 int nsegs; 1371 1372 mprot = ieee80211_alloc_prot(ni, m, rate, prot); 1373 if (mprot == NULL) { 1374 if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); 1375 device_printf(sc->sc_dev, 1376 "could not allocate mbuf for protection mode %d\n", prot); 1377 return ENOBUFS; 1378 } 1379 1380 data = &txq->data[txq->cur]; 1381 desc = &txq->desc[txq->cur]; 1382 1383 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs, 1384 &nsegs, 0); 1385 if (error != 0) { 1386 device_printf(sc->sc_dev, 1387 "could not map mbuf (error %d)\n", error); 1388 m_freem(mprot); 1389 return error; 1390 } 1391 1392 data->m = mprot; 1393 data->ni = ieee80211_ref_node(ni); 1394 /* ctl frames are not taken into account for amrr */ 1395 data->rix = IEEE80211_FIXED_RATE_NONE; 1396 1397 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 1398 flags = RT2661_TX_MORE_FRAG; 1399 if (prot == IEEE80211_PROT_RTSCTS) 1400 flags |= RT2661_TX_NEED_ACK; 1401 1402 rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len, 1403 protrate, segs, 1, ac); 1404 1405 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1406 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1407 1408 txq->queued++; 1409 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1410 1411 return 0; 1412 } 1413 1414 static int 1415 rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, 1416 struct ieee80211_node *ni, int ac) 1417 { 1418 struct ieee80211vap *vap = ni->ni_vap; 1419 struct ieee80211com *ic = &sc->sc_ic; 1420 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1421 struct rt2661_tx_desc *desc; 1422 struct rt2661_tx_data *data; 1423 struct ieee80211_frame *wh; 1424 const struct ieee80211_txparam *tp = ni->ni_txparms; 1425 struct ieee80211_key *k; 1426 struct mbuf *mnew; 1427 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1428 uint16_t dur; 1429 uint32_t flags; 1430 int error, nsegs, rate, noack = 0; 1431 1432 wh = mtod(m0, struct ieee80211_frame *); 1433 1434 if (m0->m_flags & M_EAPOL) { 1435 rate = tp->mgmtrate; 1436 } else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1437 rate = tp->mcastrate; 1438 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1439 rate = tp->ucastrate; 1440 } else { 1441 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1442 rate = ni->ni_txrate; 1443 } 1444 rate &= IEEE80211_RATE_VAL; 1445 1446 if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) 1447 noack = !! ieee80211_wme_vap_ac_is_noack(vap, ac); 1448 1449 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1450 k = ieee80211_crypto_encap(ni, m0); 1451 if (k == NULL) { 1452 m_freem(m0); 1453 return ENOBUFS; 1454 } 1455 1456 /* packet header may have moved, reset our local pointer */ 1457 wh = mtod(m0, struct ieee80211_frame *); 1458 } 1459 1460 flags = 0; 1461 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1462 int prot = IEEE80211_PROT_NONE; 1463 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1464 prot = IEEE80211_PROT_RTSCTS; 1465 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1466 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) 1467 prot = ic->ic_protmode; 1468 if (prot != IEEE80211_PROT_NONE) { 1469 error = rt2661_sendprot(sc, ac, m0, ni, prot, rate); 1470 if (error) { 1471 m_freem(m0); 1472 return error; 1473 } 1474 flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS; 1475 } 1476 } 1477 1478 data = &txq->data[txq->cur]; 1479 desc = &txq->desc[txq->cur]; 1480 1481 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, 1482 &nsegs, 0); 1483 if (error != 0 && error != EFBIG) { 1484 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1485 error); 1486 m_freem(m0); 1487 return error; 1488 } 1489 if (error != 0) { 1490 mnew = m_defrag(m0, M_NOWAIT); 1491 if (mnew == NULL) { 1492 device_printf(sc->sc_dev, 1493 "could not defragment mbuf\n"); 1494 m_freem(m0); 1495 return ENOBUFS; 1496 } 1497 m0 = mnew; 1498 1499 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, 1500 segs, &nsegs, 0); 1501 if (error != 0) { 1502 device_printf(sc->sc_dev, 1503 "could not map mbuf (error %d)\n", error); 1504 m_freem(m0); 1505 return error; 1506 } 1507 1508 /* packet header have moved, reset our local pointer */ 1509 wh = mtod(m0, struct ieee80211_frame *); 1510 } 1511 1512 if (ieee80211_radiotap_active_vap(vap)) { 1513 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1514 1515 tap->wt_flags = 0; 1516 tap->wt_rate = rate; 1517 1518 ieee80211_radiotap_tx(vap, m0); 1519 } 1520 1521 data->m = m0; 1522 data->ni = ni; 1523 1524 /* remember link conditions for rate adaptation algorithm */ 1525 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1526 data->rix = ni->ni_txrate; 1527 /* XXX probably need last rssi value and not avg */ 1528 data->rssi = ic->ic_node_getrssi(ni); 1529 } else 1530 data->rix = IEEE80211_FIXED_RATE_NONE; 1531 1532 if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1533 flags |= RT2661_TX_NEED_ACK; 1534 1535 dur = ieee80211_ack_duration(ic->ic_rt, 1536 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1537 *(uint16_t *)wh->i_dur = htole16(dur); 1538 } 1539 1540 rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs, 1541 nsegs, ac); 1542 1543 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1544 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1545 1546 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1547 m0->m_pkthdr.len, txq->cur, rate); 1548 1549 /* kick Tx */ 1550 txq->queued++; 1551 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1552 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac); 1553 1554 return 0; 1555 } 1556 1557 static int 1558 rt2661_transmit(struct ieee80211com *ic, struct mbuf *m) 1559 { 1560 struct rt2661_softc *sc = ic->ic_softc; 1561 int error; 1562 1563 RAL_LOCK(sc); 1564 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1565 RAL_UNLOCK(sc); 1566 return (ENXIO); 1567 } 1568 error = mbufq_enqueue(&sc->sc_snd, m); 1569 if (error) { 1570 RAL_UNLOCK(sc); 1571 return (error); 1572 } 1573 rt2661_start(sc); 1574 RAL_UNLOCK(sc); 1575 1576 return (0); 1577 } 1578 1579 static void 1580 rt2661_start(struct rt2661_softc *sc) 1581 { 1582 struct mbuf *m; 1583 struct ieee80211_node *ni; 1584 int ac; 1585 1586 RAL_LOCK_ASSERT(sc); 1587 1588 /* prevent management frames from being sent if we're not ready */ 1589 if (!(sc->sc_flags & RAL_RUNNING) || sc->sc_invalid) 1590 return; 1591 1592 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 1593 ac = M_WME_GETAC(m); 1594 if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) { 1595 /* there is no place left in this ring */ 1596 mbufq_prepend(&sc->sc_snd, m); 1597 break; 1598 } 1599 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1600 if (rt2661_tx_data(sc, m, ni, ac) != 0) { 1601 if_inc_counter(ni->ni_vap->iv_ifp, 1602 IFCOUNTER_OERRORS, 1); 1603 ieee80211_free_node(ni); 1604 break; 1605 } 1606 sc->sc_tx_timer = 5; 1607 } 1608 } 1609 1610 static int 1611 rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 1612 const struct ieee80211_bpf_params *params) 1613 { 1614 struct ieee80211com *ic = ni->ni_ic; 1615 struct rt2661_softc *sc = ic->ic_softc; 1616 1617 RAL_LOCK(sc); 1618 1619 /* prevent management frames from being sent if we're not ready */ 1620 if (!(sc->sc_flags & RAL_RUNNING)) { 1621 RAL_UNLOCK(sc); 1622 m_freem(m); 1623 return ENETDOWN; 1624 } 1625 if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { 1626 RAL_UNLOCK(sc); 1627 m_freem(m); 1628 return ENOBUFS; /* XXX */ 1629 } 1630 1631 /* 1632 * Legacy path; interpret frame contents to decide 1633 * precisely how to send the frame. 1634 * XXX raw path 1635 */ 1636 if (rt2661_tx_mgt(sc, m, ni) != 0) 1637 goto bad; 1638 sc->sc_tx_timer = 5; 1639 1640 RAL_UNLOCK(sc); 1641 1642 return 0; 1643 bad: 1644 RAL_UNLOCK(sc); 1645 return EIO; /* XXX */ 1646 } 1647 1648 static void 1649 rt2661_watchdog(void *arg) 1650 { 1651 struct rt2661_softc *sc = (struct rt2661_softc *)arg; 1652 1653 RAL_LOCK_ASSERT(sc); 1654 1655 KASSERT(sc->sc_flags & RAL_RUNNING, ("not running")); 1656 1657 if (sc->sc_invalid) /* card ejected */ 1658 return; 1659 1660 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1661 device_printf(sc->sc_dev, "device timeout\n"); 1662 rt2661_init_locked(sc); 1663 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 1664 /* NB: callout is reset in rt2661_init() */ 1665 return; 1666 } 1667 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 1668 } 1669 1670 static void 1671 rt2661_parent(struct ieee80211com *ic) 1672 { 1673 struct rt2661_softc *sc = ic->ic_softc; 1674 int startall = 0; 1675 1676 RAL_LOCK(sc); 1677 if (ic->ic_nrunning > 0) { 1678 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1679 rt2661_init_locked(sc); 1680 startall = 1; 1681 } else 1682 rt2661_update_promisc(ic); 1683 } else if (sc->sc_flags & RAL_RUNNING) 1684 rt2661_stop_locked(sc); 1685 RAL_UNLOCK(sc); 1686 if (startall) 1687 ieee80211_start_all(ic); 1688 } 1689 1690 static void 1691 rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) 1692 { 1693 uint32_t tmp; 1694 int ntries; 1695 1696 for (ntries = 0; ntries < 100; ntries++) { 1697 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1698 break; 1699 DELAY(1); 1700 } 1701 if (ntries == 100) { 1702 device_printf(sc->sc_dev, "could not write to BBP\n"); 1703 return; 1704 } 1705 1706 tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; 1707 RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); 1708 1709 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1710 } 1711 1712 static uint8_t 1713 rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) 1714 { 1715 uint32_t val; 1716 int ntries; 1717 1718 for (ntries = 0; ntries < 100; ntries++) { 1719 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1720 break; 1721 DELAY(1); 1722 } 1723 if (ntries == 100) { 1724 device_printf(sc->sc_dev, "could not read from BBP\n"); 1725 return 0; 1726 } 1727 1728 val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; 1729 RAL_WRITE(sc, RT2661_PHY_CSR3, val); 1730 1731 for (ntries = 0; ntries < 100; ntries++) { 1732 val = RAL_READ(sc, RT2661_PHY_CSR3); 1733 if (!(val & RT2661_BBP_BUSY)) 1734 return val & 0xff; 1735 DELAY(1); 1736 } 1737 1738 device_printf(sc->sc_dev, "could not read from BBP\n"); 1739 return 0; 1740 } 1741 1742 static void 1743 rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) 1744 { 1745 uint32_t tmp; 1746 int ntries; 1747 1748 for (ntries = 0; ntries < 100; ntries++) { 1749 if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) 1750 break; 1751 DELAY(1); 1752 } 1753 if (ntries == 100) { 1754 device_printf(sc->sc_dev, "could not write to RF\n"); 1755 return; 1756 } 1757 1758 tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | 1759 (reg & 3); 1760 RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); 1761 1762 /* remember last written value in sc */ 1763 sc->rf_regs[reg] = val; 1764 1765 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff); 1766 } 1767 1768 static int 1769 rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) 1770 { 1771 if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) 1772 return EIO; /* there is already a command pending */ 1773 1774 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 1775 RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); 1776 1777 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); 1778 1779 return 0; 1780 } 1781 1782 static void 1783 rt2661_select_antenna(struct rt2661_softc *sc) 1784 { 1785 uint8_t bbp4, bbp77; 1786 uint32_t tmp; 1787 1788 bbp4 = rt2661_bbp_read(sc, 4); 1789 bbp77 = rt2661_bbp_read(sc, 77); 1790 1791 /* TBD */ 1792 1793 /* make sure Rx is disabled before switching antenna */ 1794 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 1795 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 1796 1797 rt2661_bbp_write(sc, 4, bbp4); 1798 rt2661_bbp_write(sc, 77, bbp77); 1799 1800 /* restore Rx filter */ 1801 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 1802 } 1803 1804 /* 1805 * Enable multi-rate retries for frames sent at OFDM rates. 1806 * In 802.11b/g mode, allow fallback to CCK rates. 1807 */ 1808 static void 1809 rt2661_enable_mrr(struct rt2661_softc *sc) 1810 { 1811 struct ieee80211com *ic = &sc->sc_ic; 1812 uint32_t tmp; 1813 1814 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1815 1816 tmp &= ~RT2661_MRR_CCK_FALLBACK; 1817 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) 1818 tmp |= RT2661_MRR_CCK_FALLBACK; 1819 tmp |= RT2661_MRR_ENABLED; 1820 1821 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1822 } 1823 1824 static void 1825 rt2661_set_txpreamble(struct rt2661_softc *sc) 1826 { 1827 struct ieee80211com *ic = &sc->sc_ic; 1828 uint32_t tmp; 1829 1830 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1831 1832 tmp &= ~RT2661_SHORT_PREAMBLE; 1833 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1834 tmp |= RT2661_SHORT_PREAMBLE; 1835 1836 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1837 } 1838 1839 static void 1840 rt2661_set_basicrates(struct rt2661_softc *sc, 1841 const struct ieee80211_rateset *rs) 1842 { 1843 struct ieee80211com *ic = &sc->sc_ic; 1844 uint32_t mask = 0; 1845 uint8_t rate; 1846 int i; 1847 1848 for (i = 0; i < rs->rs_nrates; i++) { 1849 rate = rs->rs_rates[i]; 1850 1851 if (!(rate & IEEE80211_RATE_BASIC)) 1852 continue; 1853 1854 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, 1855 IEEE80211_RV(rate)); 1856 } 1857 1858 RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); 1859 1860 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 1861 } 1862 1863 /* 1864 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference 1865 * driver. 1866 */ 1867 static void 1868 rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) 1869 { 1870 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; 1871 uint32_t tmp; 1872 1873 /* update all BBP registers that depend on the band */ 1874 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; 1875 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; 1876 if (IEEE80211_IS_CHAN_5GHZ(c)) { 1877 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; 1878 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; 1879 } 1880 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1881 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1882 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; 1883 } 1884 1885 rt2661_bbp_write(sc, 17, bbp17); 1886 rt2661_bbp_write(sc, 96, bbp96); 1887 rt2661_bbp_write(sc, 104, bbp104); 1888 1889 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1890 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1891 rt2661_bbp_write(sc, 75, 0x80); 1892 rt2661_bbp_write(sc, 86, 0x80); 1893 rt2661_bbp_write(sc, 88, 0x80); 1894 } 1895 1896 rt2661_bbp_write(sc, 35, bbp35); 1897 rt2661_bbp_write(sc, 97, bbp97); 1898 rt2661_bbp_write(sc, 98, bbp98); 1899 1900 tmp = RAL_READ(sc, RT2661_PHY_CSR0); 1901 tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); 1902 if (IEEE80211_IS_CHAN_2GHZ(c)) 1903 tmp |= RT2661_PA_PE_2GHZ; 1904 else 1905 tmp |= RT2661_PA_PE_5GHZ; 1906 RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); 1907 } 1908 1909 static void 1910 rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) 1911 { 1912 struct ieee80211com *ic = &sc->sc_ic; 1913 const struct rfprog *rfprog; 1914 uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; 1915 int8_t power; 1916 u_int i, chan; 1917 1918 chan = ieee80211_chan2ieee(ic, c); 1919 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 1920 1921 /* select the appropriate RF settings based on what EEPROM says */ 1922 rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; 1923 1924 /* find the settings for this channel (we know it exists) */ 1925 for (i = 0; rfprog[i].chan != chan; i++); 1926 1927 power = sc->txpow[i]; 1928 if (power < 0) { 1929 bbp94 += power; 1930 power = 0; 1931 } else if (power > 31) { 1932 bbp94 += power - 31; 1933 power = 31; 1934 } 1935 1936 /* 1937 * If we are switching from the 2GHz band to the 5GHz band or 1938 * vice-versa, BBP registers need to be reprogrammed. 1939 */ 1940 if (c->ic_flags != sc->sc_curchan->ic_flags) { 1941 rt2661_select_band(sc, c); 1942 rt2661_select_antenna(sc); 1943 } 1944 sc->sc_curchan = c; 1945 1946 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1947 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1948 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 1949 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1950 1951 DELAY(200); 1952 1953 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1954 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1955 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); 1956 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1957 1958 DELAY(200); 1959 1960 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1961 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1962 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 1963 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1964 1965 /* enable smart mode for MIMO-capable RFs */ 1966 bbp3 = rt2661_bbp_read(sc, 3); 1967 1968 bbp3 &= ~RT2661_SMART_MODE; 1969 if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) 1970 bbp3 |= RT2661_SMART_MODE; 1971 1972 rt2661_bbp_write(sc, 3, bbp3); 1973 1974 if (bbp94 != RT2661_BBPR94_DEFAULT) 1975 rt2661_bbp_write(sc, 94, bbp94); 1976 1977 /* 5GHz radio needs a 1ms delay here */ 1978 if (IEEE80211_IS_CHAN_5GHZ(c)) 1979 DELAY(1000); 1980 } 1981 1982 static void 1983 rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) 1984 { 1985 uint32_t tmp; 1986 1987 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 1988 RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); 1989 1990 tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; 1991 RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); 1992 } 1993 1994 static void 1995 rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) 1996 { 1997 uint32_t tmp; 1998 1999 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2000 RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); 2001 2002 tmp = addr[4] | addr[5] << 8; 2003 RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); 2004 } 2005 2006 static void 2007 rt2661_update_promisc(struct ieee80211com *ic) 2008 { 2009 struct rt2661_softc *sc = ic->ic_softc; 2010 uint32_t tmp; 2011 2012 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2013 2014 tmp &= ~RT2661_DROP_NOT_TO_ME; 2015 if (ic->ic_promisc == 0) 2016 tmp |= RT2661_DROP_NOT_TO_ME; 2017 2018 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2019 2020 DPRINTF(sc, "%s promiscuous mode\n", 2021 (ic->ic_promisc > 0) ? "entering" : "leaving"); 2022 } 2023 2024 /* 2025 * Update QoS (802.11e) settings for each h/w Tx ring. 2026 */ 2027 static int 2028 rt2661_wme_update(struct ieee80211com *ic) 2029 { 2030 struct rt2661_softc *sc = ic->ic_softc; 2031 struct chanAccParams chp; 2032 const struct wmeParams *wmep; 2033 2034 ieee80211_wme_ic_getparams(ic, &chp); 2035 2036 wmep = chp.cap_wmeParams; 2037 2038 /* XXX: not sure about shifts. */ 2039 /* XXX: the reference driver plays with AC_VI settings too. */ 2040 2041 /* update TxOp */ 2042 RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, 2043 wmep[WME_AC_BE].wmep_txopLimit << 16 | 2044 wmep[WME_AC_BK].wmep_txopLimit); 2045 RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, 2046 wmep[WME_AC_VI].wmep_txopLimit << 16 | 2047 wmep[WME_AC_VO].wmep_txopLimit); 2048 2049 /* update CWmin */ 2050 RAL_WRITE(sc, RT2661_CWMIN_CSR, 2051 wmep[WME_AC_BE].wmep_logcwmin << 12 | 2052 wmep[WME_AC_BK].wmep_logcwmin << 8 | 2053 wmep[WME_AC_VI].wmep_logcwmin << 4 | 2054 wmep[WME_AC_VO].wmep_logcwmin); 2055 2056 /* update CWmax */ 2057 RAL_WRITE(sc, RT2661_CWMAX_CSR, 2058 wmep[WME_AC_BE].wmep_logcwmax << 12 | 2059 wmep[WME_AC_BK].wmep_logcwmax << 8 | 2060 wmep[WME_AC_VI].wmep_logcwmax << 4 | 2061 wmep[WME_AC_VO].wmep_logcwmax); 2062 2063 /* update Aifsn */ 2064 RAL_WRITE(sc, RT2661_AIFSN_CSR, 2065 wmep[WME_AC_BE].wmep_aifsn << 12 | 2066 wmep[WME_AC_BK].wmep_aifsn << 8 | 2067 wmep[WME_AC_VI].wmep_aifsn << 4 | 2068 wmep[WME_AC_VO].wmep_aifsn); 2069 2070 return 0; 2071 } 2072 2073 static void 2074 rt2661_update_slot(struct ieee80211com *ic) 2075 { 2076 struct rt2661_softc *sc = ic->ic_softc; 2077 uint8_t slottime; 2078 uint32_t tmp; 2079 2080 slottime = IEEE80211_GET_SLOTTIME(ic); 2081 2082 tmp = RAL_READ(sc, RT2661_MAC_CSR9); 2083 tmp = (tmp & ~0xff) | slottime; 2084 RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); 2085 } 2086 2087 static const char * 2088 rt2661_get_rf(int rev) 2089 { 2090 switch (rev) { 2091 case RT2661_RF_5225: return "RT5225"; 2092 case RT2661_RF_5325: return "RT5325 (MIMO XR)"; 2093 case RT2661_RF_2527: return "RT2527"; 2094 case RT2661_RF_2529: return "RT2529 (MIMO XR)"; 2095 default: return "unknown"; 2096 } 2097 } 2098 2099 static void 2100 rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2101 { 2102 uint16_t val; 2103 int i; 2104 2105 /* read MAC address */ 2106 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); 2107 macaddr[0] = val & 0xff; 2108 macaddr[1] = val >> 8; 2109 2110 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); 2111 macaddr[2] = val & 0xff; 2112 macaddr[3] = val >> 8; 2113 2114 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); 2115 macaddr[4] = val & 0xff; 2116 macaddr[5] = val >> 8; 2117 2118 val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); 2119 /* XXX: test if different from 0xffff? */ 2120 sc->rf_rev = (val >> 11) & 0x1f; 2121 sc->hw_radio = (val >> 10) & 0x1; 2122 sc->rx_ant = (val >> 4) & 0x3; 2123 sc->tx_ant = (val >> 2) & 0x3; 2124 sc->nb_ant = val & 0x3; 2125 2126 DPRINTF(sc, "RF revision=%d\n", sc->rf_rev); 2127 2128 val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); 2129 sc->ext_5ghz_lna = (val >> 6) & 0x1; 2130 sc->ext_2ghz_lna = (val >> 4) & 0x1; 2131 2132 DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", 2133 sc->ext_2ghz_lna, sc->ext_5ghz_lna); 2134 2135 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); 2136 if ((val & 0xff) != 0xff) 2137 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ 2138 2139 /* Only [-10, 10] is valid */ 2140 if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10) 2141 sc->rssi_2ghz_corr = 0; 2142 2143 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); 2144 if ((val & 0xff) != 0xff) 2145 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ 2146 2147 /* Only [-10, 10] is valid */ 2148 if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10) 2149 sc->rssi_5ghz_corr = 0; 2150 2151 /* adjust RSSI correction for external low-noise amplifier */ 2152 if (sc->ext_2ghz_lna) 2153 sc->rssi_2ghz_corr -= 14; 2154 if (sc->ext_5ghz_lna) 2155 sc->rssi_5ghz_corr -= 14; 2156 2157 DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", 2158 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); 2159 2160 val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); 2161 if ((val >> 8) != 0xff) 2162 sc->rfprog = (val >> 8) & 0x3; 2163 if ((val & 0xff) != 0xff) 2164 sc->rffreq = val & 0xff; 2165 2166 DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq); 2167 2168 /* read Tx power for all a/b/g channels */ 2169 for (i = 0; i < 19; i++) { 2170 val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); 2171 sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ 2172 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2173 rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]); 2174 sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ 2175 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2176 rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]); 2177 } 2178 2179 /* read vendor-specific BBP values */ 2180 for (i = 0; i < 16; i++) { 2181 val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); 2182 if (val == 0 || val == 0xffff) 2183 continue; /* skip invalid entries */ 2184 sc->bbp_prom[i].reg = val >> 8; 2185 sc->bbp_prom[i].val = val & 0xff; 2186 DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg, 2187 sc->bbp_prom[i].val); 2188 } 2189 } 2190 2191 static int 2192 rt2661_bbp_init(struct rt2661_softc *sc) 2193 { 2194 int i, ntries; 2195 uint8_t val; 2196 2197 /* wait for BBP to be ready */ 2198 for (ntries = 0; ntries < 100; ntries++) { 2199 val = rt2661_bbp_read(sc, 0); 2200 if (val != 0 && val != 0xff) 2201 break; 2202 DELAY(100); 2203 } 2204 if (ntries == 100) { 2205 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2206 return EIO; 2207 } 2208 2209 /* initialize BBP registers to default values */ 2210 for (i = 0; i < nitems(rt2661_def_bbp); i++) { 2211 rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, 2212 rt2661_def_bbp[i].val); 2213 } 2214 2215 /* write vendor-specific BBP values (from EEPROM) */ 2216 for (i = 0; i < 16; i++) { 2217 if (sc->bbp_prom[i].reg == 0) 2218 continue; 2219 rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2220 } 2221 2222 return 0; 2223 } 2224 2225 static void 2226 rt2661_init_locked(struct rt2661_softc *sc) 2227 { 2228 struct ieee80211com *ic = &sc->sc_ic; 2229 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2230 uint32_t tmp, sta[3]; 2231 int i, error, ntries; 2232 2233 RAL_LOCK_ASSERT(sc); 2234 2235 if ((sc->sc_flags & RAL_FW_LOADED) == 0) { 2236 error = rt2661_load_microcode(sc); 2237 if (error != 0) { 2238 device_printf(sc->sc_dev, 2239 "%s: could not load 8051 microcode, error %d\n", 2240 __func__, error); 2241 return; 2242 } 2243 sc->sc_flags |= RAL_FW_LOADED; 2244 } 2245 2246 rt2661_stop_locked(sc); 2247 2248 /* initialize Tx rings */ 2249 RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); 2250 RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); 2251 RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); 2252 RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); 2253 2254 /* initialize Mgt ring */ 2255 RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); 2256 2257 /* initialize Rx ring */ 2258 RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); 2259 2260 /* initialize Tx rings sizes */ 2261 RAL_WRITE(sc, RT2661_TX_RING_CSR0, 2262 RT2661_TX_RING_COUNT << 24 | 2263 RT2661_TX_RING_COUNT << 16 | 2264 RT2661_TX_RING_COUNT << 8 | 2265 RT2661_TX_RING_COUNT); 2266 2267 RAL_WRITE(sc, RT2661_TX_RING_CSR1, 2268 RT2661_TX_DESC_WSIZE << 16 | 2269 RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ 2270 RT2661_MGT_RING_COUNT); 2271 2272 /* initialize Rx rings */ 2273 RAL_WRITE(sc, RT2661_RX_RING_CSR, 2274 RT2661_RX_DESC_BACK << 16 | 2275 RT2661_RX_DESC_WSIZE << 8 | 2276 RT2661_RX_RING_COUNT); 2277 2278 /* XXX: some magic here */ 2279 RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); 2280 2281 /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ 2282 RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); 2283 2284 /* load base address of Rx ring */ 2285 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); 2286 2287 /* initialize MAC registers to default values */ 2288 for (i = 0; i < nitems(rt2661_def_mac); i++) 2289 RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); 2290 2291 rt2661_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 2292 2293 /* set host ready */ 2294 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2295 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2296 2297 /* wait for BBP/RF to wakeup */ 2298 for (ntries = 0; ntries < 1000; ntries++) { 2299 if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) 2300 break; 2301 DELAY(1000); 2302 } 2303 if (ntries == 1000) { 2304 printf("timeout waiting for BBP/RF to wakeup\n"); 2305 rt2661_stop_locked(sc); 2306 return; 2307 } 2308 2309 if (rt2661_bbp_init(sc) != 0) { 2310 rt2661_stop_locked(sc); 2311 return; 2312 } 2313 2314 /* select default channel */ 2315 sc->sc_curchan = ic->ic_curchan; 2316 rt2661_select_band(sc, sc->sc_curchan); 2317 rt2661_select_antenna(sc); 2318 rt2661_set_chan(sc, sc->sc_curchan); 2319 2320 /* update Rx filter */ 2321 tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; 2322 2323 tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; 2324 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2325 tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | 2326 RT2661_DROP_ACKCTS; 2327 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 2328 ic->ic_opmode != IEEE80211_M_MBSS) 2329 tmp |= RT2661_DROP_TODS; 2330 if (ic->ic_promisc == 0) 2331 tmp |= RT2661_DROP_NOT_TO_ME; 2332 } 2333 2334 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2335 2336 /* clear STA registers */ 2337 RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, nitems(sta)); 2338 2339 /* initialize ASIC */ 2340 RAL_WRITE(sc, RT2661_MAC_CSR1, 4); 2341 2342 /* clear any pending interrupt */ 2343 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2344 2345 /* enable interrupts */ 2346 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 2347 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 2348 2349 /* kick Rx */ 2350 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); 2351 2352 sc->sc_flags |= RAL_RUNNING; 2353 2354 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 2355 } 2356 2357 static void 2358 rt2661_init(void *priv) 2359 { 2360 struct rt2661_softc *sc = priv; 2361 struct ieee80211com *ic = &sc->sc_ic; 2362 2363 RAL_LOCK(sc); 2364 rt2661_init_locked(sc); 2365 RAL_UNLOCK(sc); 2366 2367 if (sc->sc_flags & RAL_RUNNING) 2368 ieee80211_start_all(ic); /* start all vap's */ 2369 } 2370 2371 void 2372 rt2661_stop_locked(struct rt2661_softc *sc) 2373 { 2374 volatile int *flags = &sc->sc_flags; 2375 uint32_t tmp; 2376 2377 while (*flags & RAL_INPUT_RUNNING) 2378 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2379 2380 callout_stop(&sc->watchdog_ch); 2381 sc->sc_tx_timer = 0; 2382 2383 if (sc->sc_flags & RAL_RUNNING) { 2384 sc->sc_flags &= ~RAL_RUNNING; 2385 2386 /* abort Tx (for all 5 Tx rings) */ 2387 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); 2388 2389 /* disable Rx (value remains after reset!) */ 2390 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2391 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2392 2393 /* reset ASIC */ 2394 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2395 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2396 2397 /* disable interrupts */ 2398 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff); 2399 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 2400 2401 /* clear any pending interrupt */ 2402 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2403 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); 2404 2405 /* reset Tx and Rx rings */ 2406 rt2661_reset_tx_ring(sc, &sc->txq[0]); 2407 rt2661_reset_tx_ring(sc, &sc->txq[1]); 2408 rt2661_reset_tx_ring(sc, &sc->txq[2]); 2409 rt2661_reset_tx_ring(sc, &sc->txq[3]); 2410 rt2661_reset_tx_ring(sc, &sc->mgtq); 2411 rt2661_reset_rx_ring(sc, &sc->rxq); 2412 } 2413 } 2414 2415 void 2416 rt2661_stop(void *priv) 2417 { 2418 struct rt2661_softc *sc = priv; 2419 2420 RAL_LOCK(sc); 2421 rt2661_stop_locked(sc); 2422 RAL_UNLOCK(sc); 2423 } 2424 2425 static int 2426 rt2661_load_microcode(struct rt2661_softc *sc) 2427 { 2428 const struct firmware *fp; 2429 const char *imagename; 2430 int ntries, error; 2431 2432 RAL_LOCK_ASSERT(sc); 2433 2434 switch (sc->sc_id) { 2435 case 0x0301: imagename = "rt2561sfw"; break; 2436 case 0x0302: imagename = "rt2561fw"; break; 2437 case 0x0401: imagename = "rt2661fw"; break; 2438 default: 2439 device_printf(sc->sc_dev, "%s: unexpected pci device id 0x%x, " 2440 "don't know how to retrieve firmware\n", 2441 __func__, sc->sc_id); 2442 return EINVAL; 2443 } 2444 RAL_UNLOCK(sc); 2445 fp = firmware_get(imagename); 2446 RAL_LOCK(sc); 2447 if (fp == NULL) { 2448 device_printf(sc->sc_dev, 2449 "%s: unable to retrieve firmware image %s\n", 2450 __func__, imagename); 2451 return EINVAL; 2452 } 2453 2454 /* 2455 * Load 8051 microcode into NIC. 2456 */ 2457 /* reset 8051 */ 2458 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2459 2460 /* cancel any pending Host to MCU command */ 2461 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); 2462 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 2463 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); 2464 2465 /* write 8051's microcode */ 2466 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); 2467 RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize); 2468 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2469 2470 /* kick 8051's ass */ 2471 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); 2472 2473 /* wait for 8051 to initialize */ 2474 for (ntries = 0; ntries < 500; ntries++) { 2475 if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) 2476 break; 2477 DELAY(100); 2478 } 2479 if (ntries == 500) { 2480 device_printf(sc->sc_dev, 2481 "%s: timeout waiting for MCU to initialize\n", __func__); 2482 error = EIO; 2483 } else 2484 error = 0; 2485 2486 firmware_put(fp, FIRMWARE_UNLOAD); 2487 return error; 2488 } 2489 2490 #ifdef notyet 2491 /* 2492 * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and 2493 * false CCA count. This function is called periodically (every seconds) when 2494 * in the RUN state. Values taken from the reference driver. 2495 */ 2496 static void 2497 rt2661_rx_tune(struct rt2661_softc *sc) 2498 { 2499 uint8_t bbp17; 2500 uint16_t cca; 2501 int lo, hi, dbm; 2502 2503 /* 2504 * Tuning range depends on operating band and on the presence of an 2505 * external low-noise amplifier. 2506 */ 2507 lo = 0x20; 2508 if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) 2509 lo += 0x08; 2510 if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || 2511 (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) 2512 lo += 0x10; 2513 hi = lo + 0x20; 2514 2515 /* retrieve false CCA count since last call (clear on read) */ 2516 cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; 2517 2518 if (dbm >= -35) { 2519 bbp17 = 0x60; 2520 } else if (dbm >= -58) { 2521 bbp17 = hi; 2522 } else if (dbm >= -66) { 2523 bbp17 = lo + 0x10; 2524 } else if (dbm >= -74) { 2525 bbp17 = lo + 0x08; 2526 } else { 2527 /* RSSI < -74dBm, tune using false CCA count */ 2528 2529 bbp17 = sc->bbp17; /* current value */ 2530 2531 hi -= 2 * (-74 - dbm); 2532 if (hi < lo) 2533 hi = lo; 2534 2535 if (bbp17 > hi) { 2536 bbp17 = hi; 2537 2538 } else if (cca > 512) { 2539 if (++bbp17 > hi) 2540 bbp17 = hi; 2541 } else if (cca < 100) { 2542 if (--bbp17 < lo) 2543 bbp17 = lo; 2544 } 2545 } 2546 2547 if (bbp17 != sc->bbp17) { 2548 rt2661_bbp_write(sc, 17, bbp17); 2549 sc->bbp17 = bbp17; 2550 } 2551 } 2552 2553 /* 2554 * Enter/Leave radar detection mode. 2555 * This is for 802.11h additional regulatory domains. 2556 */ 2557 static void 2558 rt2661_radar_start(struct rt2661_softc *sc) 2559 { 2560 uint32_t tmp; 2561 2562 /* disable Rx */ 2563 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2564 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2565 2566 rt2661_bbp_write(sc, 82, 0x20); 2567 rt2661_bbp_write(sc, 83, 0x00); 2568 rt2661_bbp_write(sc, 84, 0x40); 2569 2570 /* save current BBP registers values */ 2571 sc->bbp18 = rt2661_bbp_read(sc, 18); 2572 sc->bbp21 = rt2661_bbp_read(sc, 21); 2573 sc->bbp22 = rt2661_bbp_read(sc, 22); 2574 sc->bbp16 = rt2661_bbp_read(sc, 16); 2575 sc->bbp17 = rt2661_bbp_read(sc, 17); 2576 sc->bbp64 = rt2661_bbp_read(sc, 64); 2577 2578 rt2661_bbp_write(sc, 18, 0xff); 2579 rt2661_bbp_write(sc, 21, 0x3f); 2580 rt2661_bbp_write(sc, 22, 0x3f); 2581 rt2661_bbp_write(sc, 16, 0xbd); 2582 rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); 2583 rt2661_bbp_write(sc, 64, 0x21); 2584 2585 /* restore Rx filter */ 2586 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2587 } 2588 2589 static int 2590 rt2661_radar_stop(struct rt2661_softc *sc) 2591 { 2592 uint8_t bbp66; 2593 2594 /* read radar detection result */ 2595 bbp66 = rt2661_bbp_read(sc, 66); 2596 2597 /* restore BBP registers values */ 2598 rt2661_bbp_write(sc, 16, sc->bbp16); 2599 rt2661_bbp_write(sc, 17, sc->bbp17); 2600 rt2661_bbp_write(sc, 18, sc->bbp18); 2601 rt2661_bbp_write(sc, 21, sc->bbp21); 2602 rt2661_bbp_write(sc, 22, sc->bbp22); 2603 rt2661_bbp_write(sc, 64, sc->bbp64); 2604 2605 return bbp66 == 1; 2606 } 2607 #endif 2608 2609 static int 2610 rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap) 2611 { 2612 struct ieee80211com *ic = vap->iv_ic; 2613 struct rt2661_tx_desc desc; 2614 struct mbuf *m0; 2615 int rate; 2616 2617 if ((m0 = ieee80211_beacon_alloc(vap->iv_bss))== NULL) { 2618 device_printf(sc->sc_dev, "could not allocate beacon frame\n"); 2619 return ENOBUFS; 2620 } 2621 2622 /* send beacons at the lowest available rate */ 2623 rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2; 2624 2625 rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, 2626 m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); 2627 2628 /* copy the first 24 bytes of Tx descriptor into NIC memory */ 2629 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); 2630 2631 /* copy beacon header and payload into NIC memory */ 2632 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, 2633 mtod(m0, uint8_t *), m0->m_pkthdr.len); 2634 2635 m_freem(m0); 2636 2637 return 0; 2638 } 2639 2640 /* 2641 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS 2642 * and HostAP operating modes. 2643 */ 2644 static void 2645 rt2661_enable_tsf_sync(struct rt2661_softc *sc) 2646 { 2647 struct ieee80211com *ic = &sc->sc_ic; 2648 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2649 uint32_t tmp; 2650 2651 if (vap->iv_opmode != IEEE80211_M_STA) { 2652 /* 2653 * Change default 16ms TBTT adjustment to 8ms. 2654 * Must be done before enabling beacon generation. 2655 */ 2656 RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); 2657 } 2658 2659 tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; 2660 2661 /* set beacon interval (in 1/16ms unit) */ 2662 tmp |= vap->iv_bss->ni_intval * 16; 2663 2664 tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; 2665 if (vap->iv_opmode == IEEE80211_M_STA) 2666 tmp |= RT2661_TSF_MODE(1); 2667 else 2668 tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; 2669 2670 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); 2671 } 2672 2673 static void 2674 rt2661_enable_tsf(struct rt2661_softc *sc) 2675 { 2676 RAL_WRITE(sc, RT2661_TXRX_CSR9, 2677 (RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000) 2678 | RT2661_TSF_TICKING | RT2661_TSF_MODE(2)); 2679 } 2680 2681 /* 2682 * Retrieve the "Received Signal Strength Indicator" from the raw values 2683 * contained in Rx descriptors. The computation depends on which band the 2684 * frame was received. Correction values taken from the reference driver. 2685 */ 2686 static int 2687 rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) 2688 { 2689 int lna, agc, rssi; 2690 2691 lna = (raw >> 5) & 0x3; 2692 agc = raw & 0x1f; 2693 2694 if (lna == 0) { 2695 /* 2696 * No mapping available. 2697 * 2698 * NB: Since RSSI is relative to noise floor, -1 is 2699 * adequate for caller to know error happened. 2700 */ 2701 return -1; 2702 } 2703 2704 rssi = (2 * agc) - RT2661_NOISE_FLOOR; 2705 2706 if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { 2707 rssi += sc->rssi_2ghz_corr; 2708 2709 if (lna == 1) 2710 rssi -= 64; 2711 else if (lna == 2) 2712 rssi -= 74; 2713 else if (lna == 3) 2714 rssi -= 90; 2715 } else { 2716 rssi += sc->rssi_5ghz_corr; 2717 2718 if (lna == 1) 2719 rssi -= 64; 2720 else if (lna == 2) 2721 rssi -= 86; 2722 else if (lna == 3) 2723 rssi -= 100; 2724 } 2725 return rssi; 2726 } 2727 2728 static void 2729 rt2661_scan_start(struct ieee80211com *ic) 2730 { 2731 struct rt2661_softc *sc = ic->ic_softc; 2732 uint32_t tmp; 2733 2734 /* abort TSF synchronization */ 2735 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 2736 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff); 2737 rt2661_set_bssid(sc, ieee80211broadcastaddr); 2738 } 2739 2740 static void 2741 rt2661_scan_end(struct ieee80211com *ic) 2742 { 2743 struct rt2661_softc *sc = ic->ic_softc; 2744 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2745 2746 rt2661_enable_tsf_sync(sc); 2747 /* XXX keep local copy */ 2748 rt2661_set_bssid(sc, vap->iv_bss->ni_bssid); 2749 } 2750 2751 static void 2752 rt2661_getradiocaps(struct ieee80211com *ic, 2753 int maxchans, int *nchans, struct ieee80211_channel chans[]) 2754 { 2755 struct rt2661_softc *sc = ic->ic_softc; 2756 uint8_t bands[IEEE80211_MODE_BYTES]; 2757 2758 memset(bands, 0, sizeof(bands)); 2759 setbit(bands, IEEE80211_MODE_11B); 2760 setbit(bands, IEEE80211_MODE_11G); 2761 ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, bands, 0); 2762 2763 if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) { 2764 setbit(bands, IEEE80211_MODE_11A); 2765 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, 2766 rt2661_chan_5ghz, nitems(rt2661_chan_5ghz), bands, 0); 2767 } 2768 } 2769 2770 static void 2771 rt2661_set_channel(struct ieee80211com *ic) 2772 { 2773 struct rt2661_softc *sc = ic->ic_softc; 2774 2775 RAL_LOCK(sc); 2776 rt2661_set_chan(sc, ic->ic_curchan); 2777 RAL_UNLOCK(sc); 2778 2779 } 2780