1 /* $FreeBSD$ */ 2 3 /*- 4 * Copyright (c) 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2561, RT2561S and RT2661 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/module.h> 39 #include <sys/bus.h> 40 #include <sys/endian.h> 41 #include <sys/firmware.h> 42 43 #include <machine/bus.h> 44 #include <machine/resource.h> 45 #include <sys/rman.h> 46 47 #include <net/bpf.h> 48 #include <net/if.h> 49 #include <net/if_var.h> 50 #include <net/if_arp.h> 51 #include <net/ethernet.h> 52 #include <net/if_dl.h> 53 #include <net/if_media.h> 54 #include <net/if_types.h> 55 56 #include <net80211/ieee80211_var.h> 57 #include <net80211/ieee80211_radiotap.h> 58 #include <net80211/ieee80211_regdomain.h> 59 #include <net80211/ieee80211_ratectl.h> 60 61 #include <netinet/in.h> 62 #include <netinet/in_systm.h> 63 #include <netinet/in_var.h> 64 #include <netinet/ip.h> 65 #include <netinet/if_ether.h> 66 67 #include <dev/ral/rt2661reg.h> 68 #include <dev/ral/rt2661var.h> 69 70 #define RAL_DEBUG 71 #ifdef RAL_DEBUG 72 #define DPRINTF(sc, fmt, ...) do { \ 73 if (sc->sc_debug > 0) \ 74 printf(fmt, __VA_ARGS__); \ 75 } while (0) 76 #define DPRINTFN(sc, n, fmt, ...) do { \ 77 if (sc->sc_debug >= (n)) \ 78 printf(fmt, __VA_ARGS__); \ 79 } while (0) 80 #else 81 #define DPRINTF(sc, fmt, ...) 82 #define DPRINTFN(sc, n, fmt, ...) 83 #endif 84 85 static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *, 86 const char [IFNAMSIZ], int, enum ieee80211_opmode, 87 int, const uint8_t [IEEE80211_ADDR_LEN], 88 const uint8_t [IEEE80211_ADDR_LEN]); 89 static void rt2661_vap_delete(struct ieee80211vap *); 90 static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int, 91 int); 92 static int rt2661_alloc_tx_ring(struct rt2661_softc *, 93 struct rt2661_tx_ring *, int); 94 static void rt2661_reset_tx_ring(struct rt2661_softc *, 95 struct rt2661_tx_ring *); 96 static void rt2661_free_tx_ring(struct rt2661_softc *, 97 struct rt2661_tx_ring *); 98 static int rt2661_alloc_rx_ring(struct rt2661_softc *, 99 struct rt2661_rx_ring *, int); 100 static void rt2661_reset_rx_ring(struct rt2661_softc *, 101 struct rt2661_rx_ring *); 102 static void rt2661_free_rx_ring(struct rt2661_softc *, 103 struct rt2661_rx_ring *); 104 static int rt2661_newstate(struct ieee80211vap *, 105 enum ieee80211_state, int); 106 static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); 107 static void rt2661_rx_intr(struct rt2661_softc *); 108 static void rt2661_tx_intr(struct rt2661_softc *); 109 static void rt2661_tx_dma_intr(struct rt2661_softc *, 110 struct rt2661_tx_ring *); 111 static void rt2661_mcu_beacon_expire(struct rt2661_softc *); 112 static void rt2661_mcu_wakeup(struct rt2661_softc *); 113 static void rt2661_mcu_cmd_intr(struct rt2661_softc *); 114 static void rt2661_scan_start(struct ieee80211com *); 115 static void rt2661_scan_end(struct ieee80211com *); 116 static void rt2661_getradiocaps(struct ieee80211com *, int, int *, 117 struct ieee80211_channel[]); 118 static void rt2661_set_channel(struct ieee80211com *); 119 static void rt2661_setup_tx_desc(struct rt2661_softc *, 120 struct rt2661_tx_desc *, uint32_t, uint16_t, int, 121 int, const bus_dma_segment_t *, int, int); 122 static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, 123 struct ieee80211_node *, int); 124 static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, 125 struct ieee80211_node *); 126 static int rt2661_transmit(struct ieee80211com *, struct mbuf *); 127 static void rt2661_start(struct rt2661_softc *); 128 static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *, 129 const struct ieee80211_bpf_params *); 130 static void rt2661_watchdog(void *); 131 static void rt2661_parent(struct ieee80211com *); 132 static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, 133 uint8_t); 134 static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); 135 static void rt2661_rf_write(struct rt2661_softc *, uint8_t, 136 uint32_t); 137 static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, 138 uint16_t); 139 static void rt2661_select_antenna(struct rt2661_softc *); 140 static void rt2661_enable_mrr(struct rt2661_softc *); 141 static void rt2661_set_txpreamble(struct rt2661_softc *); 142 static void rt2661_set_basicrates(struct rt2661_softc *, 143 const struct ieee80211_rateset *); 144 static void rt2661_select_band(struct rt2661_softc *, 145 struct ieee80211_channel *); 146 static void rt2661_set_chan(struct rt2661_softc *, 147 struct ieee80211_channel *); 148 static void rt2661_set_bssid(struct rt2661_softc *, 149 const uint8_t *); 150 static void rt2661_set_macaddr(struct rt2661_softc *, 151 const uint8_t *); 152 static void rt2661_update_promisc(struct ieee80211com *); 153 static int rt2661_wme_update(struct ieee80211com *) __unused; 154 static void rt2661_update_slot(struct ieee80211com *); 155 static const char *rt2661_get_rf(int); 156 static void rt2661_read_eeprom(struct rt2661_softc *, 157 uint8_t macaddr[IEEE80211_ADDR_LEN]); 158 static int rt2661_bbp_init(struct rt2661_softc *); 159 static void rt2661_init_locked(struct rt2661_softc *); 160 static void rt2661_init(void *); 161 static void rt2661_stop_locked(struct rt2661_softc *); 162 static void rt2661_stop(void *); 163 static int rt2661_load_microcode(struct rt2661_softc *); 164 #ifdef notyet 165 static void rt2661_rx_tune(struct rt2661_softc *); 166 static void rt2661_radar_start(struct rt2661_softc *); 167 static int rt2661_radar_stop(struct rt2661_softc *); 168 #endif 169 static int rt2661_prepare_beacon(struct rt2661_softc *, 170 struct ieee80211vap *); 171 static void rt2661_enable_tsf_sync(struct rt2661_softc *); 172 static void rt2661_enable_tsf(struct rt2661_softc *); 173 static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); 174 175 static const struct { 176 uint32_t reg; 177 uint32_t val; 178 } rt2661_def_mac[] = { 179 RT2661_DEF_MAC 180 }; 181 182 static const struct { 183 uint8_t reg; 184 uint8_t val; 185 } rt2661_def_bbp[] = { 186 RT2661_DEF_BBP 187 }; 188 189 static const struct rfprog { 190 uint8_t chan; 191 uint32_t r1, r2, r3, r4; 192 } rt2661_rf5225_1[] = { 193 RT2661_RF5225_1 194 }, rt2661_rf5225_2[] = { 195 RT2661_RF5225_2 196 }; 197 198 static const uint8_t rt2661_chan_2ghz[] = 199 { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }; 200 static const uint8_t rt2661_chan_5ghz[] = 201 { 36, 40, 44, 48, 52, 56, 60, 64, 202 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 203 149, 153, 157, 161, 165 }; 204 205 int 206 rt2661_attach(device_t dev, int id) 207 { 208 struct rt2661_softc *sc = device_get_softc(dev); 209 struct ieee80211com *ic = &sc->sc_ic; 210 uint32_t val; 211 int error, ac, ntries; 212 213 sc->sc_id = id; 214 sc->sc_dev = dev; 215 216 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 217 MTX_DEF | MTX_RECURSE); 218 219 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 220 mbufq_init(&sc->sc_snd, ifqmaxlen); 221 222 /* wait for NIC to initialize */ 223 for (ntries = 0; ntries < 1000; ntries++) { 224 if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) 225 break; 226 DELAY(1000); 227 } 228 if (ntries == 1000) { 229 device_printf(sc->sc_dev, 230 "timeout waiting for NIC to initialize\n"); 231 error = EIO; 232 goto fail1; 233 } 234 235 /* retrieve RF rev. no and various other things from EEPROM */ 236 rt2661_read_eeprom(sc, ic->ic_macaddr); 237 238 device_printf(dev, "MAC/BBP RT%X, RF %s\n", val, 239 rt2661_get_rf(sc->rf_rev)); 240 241 /* 242 * Allocate Tx and Rx rings. 243 */ 244 for (ac = 0; ac < 4; ac++) { 245 error = rt2661_alloc_tx_ring(sc, &sc->txq[ac], 246 RT2661_TX_RING_COUNT); 247 if (error != 0) { 248 device_printf(sc->sc_dev, 249 "could not allocate Tx ring %d\n", ac); 250 goto fail2; 251 } 252 } 253 254 error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); 255 if (error != 0) { 256 device_printf(sc->sc_dev, "could not allocate Mgt ring\n"); 257 goto fail2; 258 } 259 260 error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); 261 if (error != 0) { 262 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 263 goto fail3; 264 } 265 266 ic->ic_softc = sc; 267 ic->ic_name = device_get_nameunit(dev); 268 ic->ic_opmode = IEEE80211_M_STA; 269 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 270 271 /* set device capabilities */ 272 ic->ic_caps = 273 IEEE80211_C_STA /* station mode */ 274 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 275 | IEEE80211_C_HOSTAP /* hostap mode */ 276 | IEEE80211_C_MONITOR /* monitor mode */ 277 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 278 | IEEE80211_C_WDS /* 4-address traffic works */ 279 | IEEE80211_C_MBSS /* mesh point link mode */ 280 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 281 | IEEE80211_C_SHSLOT /* short slot time supported */ 282 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 283 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 284 #ifdef notyet 285 | IEEE80211_C_TXFRAG /* handle tx frags */ 286 | IEEE80211_C_WME /* 802.11e */ 287 #endif 288 ; 289 290 rt2661_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 291 ic->ic_channels); 292 293 ieee80211_ifattach(ic); 294 #if 0 295 ic->ic_wme.wme_update = rt2661_wme_update; 296 #endif 297 ic->ic_scan_start = rt2661_scan_start; 298 ic->ic_scan_end = rt2661_scan_end; 299 ic->ic_getradiocaps = rt2661_getradiocaps; 300 ic->ic_set_channel = rt2661_set_channel; 301 ic->ic_updateslot = rt2661_update_slot; 302 ic->ic_update_promisc = rt2661_update_promisc; 303 ic->ic_raw_xmit = rt2661_raw_xmit; 304 ic->ic_transmit = rt2661_transmit; 305 ic->ic_parent = rt2661_parent; 306 ic->ic_vap_create = rt2661_vap_create; 307 ic->ic_vap_delete = rt2661_vap_delete; 308 309 ieee80211_radiotap_attach(ic, 310 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 311 RT2661_TX_RADIOTAP_PRESENT, 312 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 313 RT2661_RX_RADIOTAP_PRESENT); 314 315 #ifdef RAL_DEBUG 316 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 317 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 318 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 319 #endif 320 if (bootverbose) 321 ieee80211_announce(ic); 322 323 return 0; 324 325 fail3: rt2661_free_tx_ring(sc, &sc->mgtq); 326 fail2: while (--ac >= 0) 327 rt2661_free_tx_ring(sc, &sc->txq[ac]); 328 fail1: mtx_destroy(&sc->sc_mtx); 329 return error; 330 } 331 332 int 333 rt2661_detach(void *xsc) 334 { 335 struct rt2661_softc *sc = xsc; 336 struct ieee80211com *ic = &sc->sc_ic; 337 338 RAL_LOCK(sc); 339 rt2661_stop_locked(sc); 340 RAL_UNLOCK(sc); 341 342 ieee80211_ifdetach(ic); 343 mbufq_drain(&sc->sc_snd); 344 345 rt2661_free_tx_ring(sc, &sc->txq[0]); 346 rt2661_free_tx_ring(sc, &sc->txq[1]); 347 rt2661_free_tx_ring(sc, &sc->txq[2]); 348 rt2661_free_tx_ring(sc, &sc->txq[3]); 349 rt2661_free_tx_ring(sc, &sc->mgtq); 350 rt2661_free_rx_ring(sc, &sc->rxq); 351 352 mtx_destroy(&sc->sc_mtx); 353 354 return 0; 355 } 356 357 static struct ieee80211vap * 358 rt2661_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 359 enum ieee80211_opmode opmode, int flags, 360 const uint8_t bssid[IEEE80211_ADDR_LEN], 361 const uint8_t mac[IEEE80211_ADDR_LEN]) 362 { 363 struct rt2661_softc *sc = ic->ic_softc; 364 struct rt2661_vap *rvp; 365 struct ieee80211vap *vap; 366 367 switch (opmode) { 368 case IEEE80211_M_STA: 369 case IEEE80211_M_IBSS: 370 case IEEE80211_M_AHDEMO: 371 case IEEE80211_M_MONITOR: 372 case IEEE80211_M_HOSTAP: 373 case IEEE80211_M_MBSS: 374 /* XXXRP: TBD */ 375 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 376 device_printf(sc->sc_dev, "only 1 vap supported\n"); 377 return NULL; 378 } 379 if (opmode == IEEE80211_M_STA) 380 flags |= IEEE80211_CLONE_NOBEACONS; 381 break; 382 case IEEE80211_M_WDS: 383 if (TAILQ_EMPTY(&ic->ic_vaps) || 384 ic->ic_opmode != IEEE80211_M_HOSTAP) { 385 device_printf(sc->sc_dev, 386 "wds only supported in ap mode\n"); 387 return NULL; 388 } 389 /* 390 * Silently remove any request for a unique 391 * bssid; WDS vap's always share the local 392 * mac address. 393 */ 394 flags &= ~IEEE80211_CLONE_BSSID; 395 break; 396 default: 397 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 398 return NULL; 399 } 400 rvp = malloc(sizeof(struct rt2661_vap), M_80211_VAP, M_WAITOK | M_ZERO); 401 vap = &rvp->ral_vap; 402 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 403 404 /* override state transition machine */ 405 rvp->ral_newstate = vap->iv_newstate; 406 vap->iv_newstate = rt2661_newstate; 407 #if 0 408 vap->iv_update_beacon = rt2661_beacon_update; 409 #endif 410 411 ieee80211_ratectl_init(vap); 412 /* complete setup */ 413 ieee80211_vap_attach(vap, ieee80211_media_change, 414 ieee80211_media_status, mac); 415 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 416 ic->ic_opmode = opmode; 417 return vap; 418 } 419 420 static void 421 rt2661_vap_delete(struct ieee80211vap *vap) 422 { 423 struct rt2661_vap *rvp = RT2661_VAP(vap); 424 425 ieee80211_ratectl_deinit(vap); 426 ieee80211_vap_detach(vap); 427 free(rvp, M_80211_VAP); 428 } 429 430 void 431 rt2661_shutdown(void *xsc) 432 { 433 struct rt2661_softc *sc = xsc; 434 435 rt2661_stop(sc); 436 } 437 438 void 439 rt2661_suspend(void *xsc) 440 { 441 struct rt2661_softc *sc = xsc; 442 443 rt2661_stop(sc); 444 } 445 446 void 447 rt2661_resume(void *xsc) 448 { 449 struct rt2661_softc *sc = xsc; 450 451 if (sc->sc_ic.ic_nrunning > 0) 452 rt2661_init(sc); 453 } 454 455 static void 456 rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 457 { 458 if (error != 0) 459 return; 460 461 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 462 463 *(bus_addr_t *)arg = segs[0].ds_addr; 464 } 465 466 static int 467 rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, 468 int count) 469 { 470 int i, error; 471 472 ring->count = count; 473 ring->queued = 0; 474 ring->cur = ring->next = ring->stat = 0; 475 476 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 477 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 478 count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 479 0, NULL, NULL, &ring->desc_dmat); 480 if (error != 0) { 481 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 482 goto fail; 483 } 484 485 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 486 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 487 if (error != 0) { 488 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 489 goto fail; 490 } 491 492 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 493 count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 494 0); 495 if (error != 0) { 496 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 497 goto fail; 498 } 499 500 ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, 501 M_NOWAIT | M_ZERO); 502 if (ring->data == NULL) { 503 device_printf(sc->sc_dev, "could not allocate soft data\n"); 504 error = ENOMEM; 505 goto fail; 506 } 507 508 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 509 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 510 RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 511 if (error != 0) { 512 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 513 goto fail; 514 } 515 516 for (i = 0; i < count; i++) { 517 error = bus_dmamap_create(ring->data_dmat, 0, 518 &ring->data[i].map); 519 if (error != 0) { 520 device_printf(sc->sc_dev, "could not create DMA map\n"); 521 goto fail; 522 } 523 } 524 525 return 0; 526 527 fail: rt2661_free_tx_ring(sc, ring); 528 return error; 529 } 530 531 static void 532 rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 533 { 534 struct rt2661_tx_desc *desc; 535 struct rt2661_tx_data *data; 536 int i; 537 538 for (i = 0; i < ring->count; i++) { 539 desc = &ring->desc[i]; 540 data = &ring->data[i]; 541 542 if (data->m != NULL) { 543 bus_dmamap_sync(ring->data_dmat, data->map, 544 BUS_DMASYNC_POSTWRITE); 545 bus_dmamap_unload(ring->data_dmat, data->map); 546 m_freem(data->m); 547 data->m = NULL; 548 } 549 550 if (data->ni != NULL) { 551 ieee80211_free_node(data->ni); 552 data->ni = NULL; 553 } 554 555 desc->flags = 0; 556 } 557 558 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 559 560 ring->queued = 0; 561 ring->cur = ring->next = ring->stat = 0; 562 } 563 564 static void 565 rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 566 { 567 struct rt2661_tx_data *data; 568 int i; 569 570 if (ring->desc != NULL) { 571 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 572 BUS_DMASYNC_POSTWRITE); 573 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 574 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 575 } 576 577 if (ring->desc_dmat != NULL) 578 bus_dma_tag_destroy(ring->desc_dmat); 579 580 if (ring->data != NULL) { 581 for (i = 0; i < ring->count; i++) { 582 data = &ring->data[i]; 583 584 if (data->m != NULL) { 585 bus_dmamap_sync(ring->data_dmat, data->map, 586 BUS_DMASYNC_POSTWRITE); 587 bus_dmamap_unload(ring->data_dmat, data->map); 588 m_freem(data->m); 589 } 590 591 if (data->ni != NULL) 592 ieee80211_free_node(data->ni); 593 594 if (data->map != NULL) 595 bus_dmamap_destroy(ring->data_dmat, data->map); 596 } 597 598 free(ring->data, M_DEVBUF); 599 } 600 601 if (ring->data_dmat != NULL) 602 bus_dma_tag_destroy(ring->data_dmat); 603 } 604 605 static int 606 rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, 607 int count) 608 { 609 struct rt2661_rx_desc *desc; 610 struct rt2661_rx_data *data; 611 bus_addr_t physaddr; 612 int i, error; 613 614 ring->count = count; 615 ring->cur = ring->next = 0; 616 617 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 618 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 619 count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 620 0, NULL, NULL, &ring->desc_dmat); 621 if (error != 0) { 622 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 623 goto fail; 624 } 625 626 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 627 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 628 if (error != 0) { 629 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 630 goto fail; 631 } 632 633 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 634 count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 635 0); 636 if (error != 0) { 637 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 638 goto fail; 639 } 640 641 ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, 642 M_NOWAIT | M_ZERO); 643 if (ring->data == NULL) { 644 device_printf(sc->sc_dev, "could not allocate soft data\n"); 645 error = ENOMEM; 646 goto fail; 647 } 648 649 /* 650 * Pre-allocate Rx buffers and populate Rx ring. 651 */ 652 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 653 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 654 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 655 if (error != 0) { 656 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 657 goto fail; 658 } 659 660 for (i = 0; i < count; i++) { 661 desc = &sc->rxq.desc[i]; 662 data = &sc->rxq.data[i]; 663 664 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 665 if (error != 0) { 666 device_printf(sc->sc_dev, "could not create DMA map\n"); 667 goto fail; 668 } 669 670 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 671 if (data->m == NULL) { 672 device_printf(sc->sc_dev, 673 "could not allocate rx mbuf\n"); 674 error = ENOMEM; 675 goto fail; 676 } 677 678 error = bus_dmamap_load(ring->data_dmat, data->map, 679 mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, 680 &physaddr, 0); 681 if (error != 0) { 682 device_printf(sc->sc_dev, 683 "could not load rx buf DMA map"); 684 goto fail; 685 } 686 687 desc->flags = htole32(RT2661_RX_BUSY); 688 desc->physaddr = htole32(physaddr); 689 } 690 691 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 692 693 return 0; 694 695 fail: rt2661_free_rx_ring(sc, ring); 696 return error; 697 } 698 699 static void 700 rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 701 { 702 int i; 703 704 for (i = 0; i < ring->count; i++) 705 ring->desc[i].flags = htole32(RT2661_RX_BUSY); 706 707 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 708 709 ring->cur = ring->next = 0; 710 } 711 712 static void 713 rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 714 { 715 struct rt2661_rx_data *data; 716 int i; 717 718 if (ring->desc != NULL) { 719 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 720 BUS_DMASYNC_POSTWRITE); 721 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 722 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 723 } 724 725 if (ring->desc_dmat != NULL) 726 bus_dma_tag_destroy(ring->desc_dmat); 727 728 if (ring->data != NULL) { 729 for (i = 0; i < ring->count; i++) { 730 data = &ring->data[i]; 731 732 if (data->m != NULL) { 733 bus_dmamap_sync(ring->data_dmat, data->map, 734 BUS_DMASYNC_POSTREAD); 735 bus_dmamap_unload(ring->data_dmat, data->map); 736 m_freem(data->m); 737 } 738 739 if (data->map != NULL) 740 bus_dmamap_destroy(ring->data_dmat, data->map); 741 } 742 743 free(ring->data, M_DEVBUF); 744 } 745 746 if (ring->data_dmat != NULL) 747 bus_dma_tag_destroy(ring->data_dmat); 748 } 749 750 static int 751 rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 752 { 753 struct rt2661_vap *rvp = RT2661_VAP(vap); 754 struct ieee80211com *ic = vap->iv_ic; 755 struct rt2661_softc *sc = ic->ic_softc; 756 int error; 757 758 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 759 uint32_t tmp; 760 761 /* abort TSF synchronization */ 762 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 763 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); 764 } 765 766 error = rvp->ral_newstate(vap, nstate, arg); 767 768 if (error == 0 && nstate == IEEE80211_S_RUN) { 769 struct ieee80211_node *ni = vap->iv_bss; 770 771 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 772 rt2661_enable_mrr(sc); 773 rt2661_set_txpreamble(sc); 774 rt2661_set_basicrates(sc, &ni->ni_rates); 775 rt2661_set_bssid(sc, ni->ni_bssid); 776 } 777 778 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 779 vap->iv_opmode == IEEE80211_M_IBSS || 780 vap->iv_opmode == IEEE80211_M_MBSS) { 781 error = rt2661_prepare_beacon(sc, vap); 782 if (error != 0) 783 return error; 784 } 785 if (vap->iv_opmode != IEEE80211_M_MONITOR) 786 rt2661_enable_tsf_sync(sc); 787 else 788 rt2661_enable_tsf(sc); 789 } 790 return error; 791 } 792 793 /* 794 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 795 * 93C66). 796 */ 797 static uint16_t 798 rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) 799 { 800 uint32_t tmp; 801 uint16_t val; 802 int n; 803 804 /* clock C once before the first command */ 805 RT2661_EEPROM_CTL(sc, 0); 806 807 RT2661_EEPROM_CTL(sc, RT2661_S); 808 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 809 RT2661_EEPROM_CTL(sc, RT2661_S); 810 811 /* write start bit (1) */ 812 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 813 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 814 815 /* write READ opcode (10) */ 816 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 817 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 818 RT2661_EEPROM_CTL(sc, RT2661_S); 819 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 820 821 /* write address (A5-A0 or A7-A0) */ 822 n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; 823 for (; n >= 0; n--) { 824 RT2661_EEPROM_CTL(sc, RT2661_S | 825 (((addr >> n) & 1) << RT2661_SHIFT_D)); 826 RT2661_EEPROM_CTL(sc, RT2661_S | 827 (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); 828 } 829 830 RT2661_EEPROM_CTL(sc, RT2661_S); 831 832 /* read data Q15-Q0 */ 833 val = 0; 834 for (n = 15; n >= 0; n--) { 835 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 836 tmp = RAL_READ(sc, RT2661_E2PROM_CSR); 837 val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; 838 RT2661_EEPROM_CTL(sc, RT2661_S); 839 } 840 841 RT2661_EEPROM_CTL(sc, 0); 842 843 /* clear Chip Select and clock C */ 844 RT2661_EEPROM_CTL(sc, RT2661_S); 845 RT2661_EEPROM_CTL(sc, 0); 846 RT2661_EEPROM_CTL(sc, RT2661_C); 847 848 return val; 849 } 850 851 static void 852 rt2661_tx_intr(struct rt2661_softc *sc) 853 { 854 struct rt2661_tx_ring *txq; 855 struct rt2661_tx_data *data; 856 uint32_t val; 857 int error, qid, retrycnt; 858 struct ieee80211vap *vap; 859 860 for (;;) { 861 struct ieee80211_node *ni; 862 struct mbuf *m; 863 864 val = RAL_READ(sc, RT2661_STA_CSR4); 865 if (!(val & RT2661_TX_STAT_VALID)) 866 break; 867 868 /* retrieve the queue in which this frame was sent */ 869 qid = RT2661_TX_QID(val); 870 txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; 871 872 /* retrieve rate control algorithm context */ 873 data = &txq->data[txq->stat]; 874 m = data->m; 875 data->m = NULL; 876 ni = data->ni; 877 data->ni = NULL; 878 879 /* if no frame has been sent, ignore */ 880 if (ni == NULL) 881 continue; 882 else 883 vap = ni->ni_vap; 884 885 switch (RT2661_TX_RESULT(val)) { 886 case RT2661_TX_SUCCESS: 887 retrycnt = RT2661_TX_RETRYCNT(val); 888 889 DPRINTFN(sc, 10, "data frame sent successfully after " 890 "%d retries\n", retrycnt); 891 if (data->rix != IEEE80211_FIXED_RATE_NONE) 892 ieee80211_ratectl_tx_complete(vap, ni, 893 IEEE80211_RATECTL_TX_SUCCESS, 894 &retrycnt, NULL); 895 error = 0; 896 break; 897 898 case RT2661_TX_RETRY_FAIL: 899 retrycnt = RT2661_TX_RETRYCNT(val); 900 901 DPRINTFN(sc, 9, "%s\n", 902 "sending data frame failed (too much retries)"); 903 if (data->rix != IEEE80211_FIXED_RATE_NONE) 904 ieee80211_ratectl_tx_complete(vap, ni, 905 IEEE80211_RATECTL_TX_FAILURE, 906 &retrycnt, NULL); 907 error = 1; 908 break; 909 910 default: 911 /* other failure */ 912 device_printf(sc->sc_dev, 913 "sending data frame failed 0x%08x\n", val); 914 error = 1; 915 } 916 917 DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat); 918 919 txq->queued--; 920 if (++txq->stat >= txq->count) /* faster than % count */ 921 txq->stat = 0; 922 923 ieee80211_tx_complete(ni, m, error); 924 } 925 926 sc->sc_tx_timer = 0; 927 928 rt2661_start(sc); 929 } 930 931 static void 932 rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) 933 { 934 struct rt2661_tx_desc *desc; 935 struct rt2661_tx_data *data; 936 937 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD); 938 939 for (;;) { 940 desc = &txq->desc[txq->next]; 941 data = &txq->data[txq->next]; 942 943 if ((le32toh(desc->flags) & RT2661_TX_BUSY) || 944 !(le32toh(desc->flags) & RT2661_TX_VALID)) 945 break; 946 947 bus_dmamap_sync(txq->data_dmat, data->map, 948 BUS_DMASYNC_POSTWRITE); 949 bus_dmamap_unload(txq->data_dmat, data->map); 950 951 /* descriptor is no longer valid */ 952 desc->flags &= ~htole32(RT2661_TX_VALID); 953 954 DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next); 955 956 if (++txq->next >= txq->count) /* faster than % count */ 957 txq->next = 0; 958 } 959 960 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 961 } 962 963 static void 964 rt2661_rx_intr(struct rt2661_softc *sc) 965 { 966 struct ieee80211com *ic = &sc->sc_ic; 967 struct rt2661_rx_desc *desc; 968 struct rt2661_rx_data *data; 969 bus_addr_t physaddr; 970 struct ieee80211_frame *wh; 971 struct ieee80211_node *ni; 972 struct mbuf *mnew, *m; 973 int error; 974 975 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 976 BUS_DMASYNC_POSTREAD); 977 978 for (;;) { 979 int8_t rssi, nf; 980 981 desc = &sc->rxq.desc[sc->rxq.cur]; 982 data = &sc->rxq.data[sc->rxq.cur]; 983 984 if (le32toh(desc->flags) & RT2661_RX_BUSY) 985 break; 986 987 if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || 988 (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { 989 /* 990 * This should not happen since we did not request 991 * to receive those frames when we filled TXRX_CSR0. 992 */ 993 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 994 le32toh(desc->flags)); 995 counter_u64_add(ic->ic_ierrors, 1); 996 goto skip; 997 } 998 999 if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { 1000 counter_u64_add(ic->ic_ierrors, 1); 1001 goto skip; 1002 } 1003 1004 /* 1005 * Try to allocate a new mbuf for this ring element and load it 1006 * before processing the current mbuf. If the ring element 1007 * cannot be loaded, drop the received packet and reuse the old 1008 * mbuf. In the unlikely case that the old mbuf can't be 1009 * reloaded either, explicitly panic. 1010 */ 1011 mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1012 if (mnew == NULL) { 1013 counter_u64_add(ic->ic_ierrors, 1); 1014 goto skip; 1015 } 1016 1017 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1018 BUS_DMASYNC_POSTREAD); 1019 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1020 1021 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1022 mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr, 1023 &physaddr, 0); 1024 if (error != 0) { 1025 m_freem(mnew); 1026 1027 /* try to reload the old mbuf */ 1028 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1029 mtod(data->m, void *), MCLBYTES, 1030 rt2661_dma_map_addr, &physaddr, 0); 1031 if (error != 0) { 1032 /* very unlikely that it will fail... */ 1033 panic("%s: could not load old rx mbuf", 1034 device_get_name(sc->sc_dev)); 1035 } 1036 counter_u64_add(ic->ic_ierrors, 1); 1037 goto skip; 1038 } 1039 1040 /* 1041 * New mbuf successfully loaded, update Rx ring and continue 1042 * processing. 1043 */ 1044 m = data->m; 1045 data->m = mnew; 1046 desc->physaddr = htole32(physaddr); 1047 1048 /* finalize mbuf */ 1049 m->m_pkthdr.len = m->m_len = 1050 (le32toh(desc->flags) >> 16) & 0xfff; 1051 1052 rssi = rt2661_get_rssi(sc, desc->rssi); 1053 /* Error happened during RSSI conversion. */ 1054 if (rssi < 0) 1055 rssi = -30; /* XXX ignored by net80211 */ 1056 nf = RT2661_NOISE_FLOOR; 1057 1058 if (ieee80211_radiotap_active(ic)) { 1059 struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; 1060 uint32_t tsf_lo, tsf_hi; 1061 1062 /* get timestamp (low and high 32 bits) */ 1063 tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); 1064 tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); 1065 1066 tap->wr_tsf = 1067 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1068 tap->wr_flags = 0; 1069 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1070 (desc->flags & htole32(RT2661_RX_OFDM)) ? 1071 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1072 tap->wr_antsignal = nf + rssi; 1073 tap->wr_antnoise = nf; 1074 } 1075 sc->sc_flags |= RAL_INPUT_RUNNING; 1076 RAL_UNLOCK(sc); 1077 wh = mtod(m, struct ieee80211_frame *); 1078 1079 /* send the frame to the 802.11 layer */ 1080 ni = ieee80211_find_rxnode(ic, 1081 (struct ieee80211_frame_min *)wh); 1082 if (ni != NULL) { 1083 (void) ieee80211_input(ni, m, rssi, nf); 1084 ieee80211_free_node(ni); 1085 } else 1086 (void) ieee80211_input_all(ic, m, rssi, nf); 1087 1088 RAL_LOCK(sc); 1089 sc->sc_flags &= ~RAL_INPUT_RUNNING; 1090 1091 skip: desc->flags |= htole32(RT2661_RX_BUSY); 1092 1093 DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur); 1094 1095 sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; 1096 } 1097 1098 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1099 BUS_DMASYNC_PREWRITE); 1100 } 1101 1102 /* ARGSUSED */ 1103 static void 1104 rt2661_mcu_beacon_expire(struct rt2661_softc *sc) 1105 { 1106 /* do nothing */ 1107 } 1108 1109 static void 1110 rt2661_mcu_wakeup(struct rt2661_softc *sc) 1111 { 1112 RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); 1113 1114 RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); 1115 RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); 1116 RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); 1117 1118 /* send wakeup command to MCU */ 1119 rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); 1120 } 1121 1122 static void 1123 rt2661_mcu_cmd_intr(struct rt2661_softc *sc) 1124 { 1125 RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); 1126 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 1127 } 1128 1129 void 1130 rt2661_intr(void *arg) 1131 { 1132 struct rt2661_softc *sc = arg; 1133 uint32_t r1, r2; 1134 1135 RAL_LOCK(sc); 1136 1137 /* disable MAC and MCU interrupts */ 1138 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 1139 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 1140 1141 /* don't re-enable interrupts if we're shutting down */ 1142 if (!(sc->sc_flags & RAL_RUNNING)) { 1143 RAL_UNLOCK(sc); 1144 return; 1145 } 1146 1147 r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); 1148 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); 1149 1150 r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); 1151 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); 1152 1153 if (r1 & RT2661_MGT_DONE) 1154 rt2661_tx_dma_intr(sc, &sc->mgtq); 1155 1156 if (r1 & RT2661_RX_DONE) 1157 rt2661_rx_intr(sc); 1158 1159 if (r1 & RT2661_TX0_DMA_DONE) 1160 rt2661_tx_dma_intr(sc, &sc->txq[0]); 1161 1162 if (r1 & RT2661_TX1_DMA_DONE) 1163 rt2661_tx_dma_intr(sc, &sc->txq[1]); 1164 1165 if (r1 & RT2661_TX2_DMA_DONE) 1166 rt2661_tx_dma_intr(sc, &sc->txq[2]); 1167 1168 if (r1 & RT2661_TX3_DMA_DONE) 1169 rt2661_tx_dma_intr(sc, &sc->txq[3]); 1170 1171 if (r1 & RT2661_TX_DONE) 1172 rt2661_tx_intr(sc); 1173 1174 if (r2 & RT2661_MCU_CMD_DONE) 1175 rt2661_mcu_cmd_intr(sc); 1176 1177 if (r2 & RT2661_MCU_BEACON_EXPIRE) 1178 rt2661_mcu_beacon_expire(sc); 1179 1180 if (r2 & RT2661_MCU_WAKEUP) 1181 rt2661_mcu_wakeup(sc); 1182 1183 /* re-enable MAC and MCU interrupts */ 1184 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 1185 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 1186 1187 RAL_UNLOCK(sc); 1188 } 1189 1190 static uint8_t 1191 rt2661_plcp_signal(int rate) 1192 { 1193 switch (rate) { 1194 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1195 case 12: return 0xb; 1196 case 18: return 0xf; 1197 case 24: return 0xa; 1198 case 36: return 0xe; 1199 case 48: return 0x9; 1200 case 72: return 0xd; 1201 case 96: return 0x8; 1202 case 108: return 0xc; 1203 1204 /* CCK rates (NB: not IEEE std, device-specific) */ 1205 case 2: return 0x0; 1206 case 4: return 0x1; 1207 case 11: return 0x2; 1208 case 22: return 0x3; 1209 } 1210 return 0xff; /* XXX unsupported/unknown rate */ 1211 } 1212 1213 static void 1214 rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, 1215 uint32_t flags, uint16_t xflags, int len, int rate, 1216 const bus_dma_segment_t *segs, int nsegs, int ac) 1217 { 1218 struct ieee80211com *ic = &sc->sc_ic; 1219 uint16_t plcp_length; 1220 int i, remainder; 1221 1222 desc->flags = htole32(flags); 1223 desc->flags |= htole32(len << 16); 1224 desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); 1225 1226 desc->xflags = htole16(xflags); 1227 desc->xflags |= htole16(nsegs << 13); 1228 1229 desc->wme = htole16( 1230 RT2661_QID(ac) | 1231 RT2661_AIFSN(2) | 1232 RT2661_LOGCWMIN(4) | 1233 RT2661_LOGCWMAX(10)); 1234 1235 /* 1236 * Remember in which queue this frame was sent. This field is driver 1237 * private data only. It will be made available by the NIC in STA_CSR4 1238 * on Tx interrupts. 1239 */ 1240 desc->qid = ac; 1241 1242 /* setup PLCP fields */ 1243 desc->plcp_signal = rt2661_plcp_signal(rate); 1244 desc->plcp_service = 4; 1245 1246 len += IEEE80211_CRC_LEN; 1247 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { 1248 desc->flags |= htole32(RT2661_TX_OFDM); 1249 1250 plcp_length = len & 0xfff; 1251 desc->plcp_length_hi = plcp_length >> 6; 1252 desc->plcp_length_lo = plcp_length & 0x3f; 1253 } else { 1254 plcp_length = howmany(16 * len, rate); 1255 if (rate == 22) { 1256 remainder = (16 * len) % 22; 1257 if (remainder != 0 && remainder < 7) 1258 desc->plcp_service |= RT2661_PLCP_LENGEXT; 1259 } 1260 desc->plcp_length_hi = plcp_length >> 8; 1261 desc->plcp_length_lo = plcp_length & 0xff; 1262 1263 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1264 desc->plcp_signal |= 0x08; 1265 } 1266 1267 /* RT2x61 supports scatter with up to 5 segments */ 1268 for (i = 0; i < nsegs; i++) { 1269 desc->addr[i] = htole32(segs[i].ds_addr); 1270 desc->len [i] = htole16(segs[i].ds_len); 1271 } 1272 } 1273 1274 static int 1275 rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, 1276 struct ieee80211_node *ni) 1277 { 1278 struct ieee80211vap *vap = ni->ni_vap; 1279 struct ieee80211com *ic = ni->ni_ic; 1280 struct rt2661_tx_desc *desc; 1281 struct rt2661_tx_data *data; 1282 struct ieee80211_frame *wh; 1283 struct ieee80211_key *k; 1284 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1285 uint16_t dur; 1286 uint32_t flags = 0; /* XXX HWSEQ */ 1287 int nsegs, rate, error; 1288 1289 desc = &sc->mgtq.desc[sc->mgtq.cur]; 1290 data = &sc->mgtq.data[sc->mgtq.cur]; 1291 1292 rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; 1293 1294 wh = mtod(m0, struct ieee80211_frame *); 1295 1296 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1297 k = ieee80211_crypto_encap(ni, m0); 1298 if (k == NULL) { 1299 m_freem(m0); 1300 return ENOBUFS; 1301 } 1302 } 1303 1304 error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0, 1305 segs, &nsegs, 0); 1306 if (error != 0) { 1307 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1308 error); 1309 m_freem(m0); 1310 return error; 1311 } 1312 1313 if (ieee80211_radiotap_active_vap(vap)) { 1314 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1315 1316 tap->wt_flags = 0; 1317 tap->wt_rate = rate; 1318 1319 ieee80211_radiotap_tx(vap, m0); 1320 } 1321 1322 data->m = m0; 1323 data->ni = ni; 1324 /* management frames are not taken into account for amrr */ 1325 data->rix = IEEE80211_FIXED_RATE_NONE; 1326 1327 wh = mtod(m0, struct ieee80211_frame *); 1328 1329 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1330 flags |= RT2661_TX_NEED_ACK; 1331 1332 dur = ieee80211_ack_duration(ic->ic_rt, 1333 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1334 *(uint16_t *)wh->i_dur = htole16(dur); 1335 1336 /* tell hardware to add timestamp in probe responses */ 1337 if ((wh->i_fc[0] & 1338 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1339 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1340 flags |= RT2661_TX_TIMESTAMP; 1341 } 1342 1343 rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, 1344 m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT); 1345 1346 bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1347 bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map, 1348 BUS_DMASYNC_PREWRITE); 1349 1350 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1351 m0->m_pkthdr.len, sc->mgtq.cur, rate); 1352 1353 /* kick mgt */ 1354 sc->mgtq.queued++; 1355 sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; 1356 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); 1357 1358 return 0; 1359 } 1360 1361 static int 1362 rt2661_sendprot(struct rt2661_softc *sc, int ac, 1363 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1364 { 1365 struct ieee80211com *ic = ni->ni_ic; 1366 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1367 const struct ieee80211_frame *wh; 1368 struct rt2661_tx_desc *desc; 1369 struct rt2661_tx_data *data; 1370 struct mbuf *mprot; 1371 int protrate, ackrate, pktlen, flags, isshort, error; 1372 uint16_t dur; 1373 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1374 int nsegs; 1375 1376 KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, 1377 ("protection %d", prot)); 1378 1379 wh = mtod(m, const struct ieee80211_frame *); 1380 pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; 1381 1382 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 1383 ackrate = ieee80211_ack_rate(ic->ic_rt, rate); 1384 1385 isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; 1386 dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort) 1387 + ieee80211_ack_duration(ic->ic_rt, rate, isshort); 1388 flags = RT2661_TX_MORE_FRAG; 1389 if (prot == IEEE80211_PROT_RTSCTS) { 1390 /* NB: CTS is the same size as an ACK */ 1391 dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort); 1392 flags |= RT2661_TX_NEED_ACK; 1393 mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); 1394 } else { 1395 mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); 1396 } 1397 if (mprot == NULL) { 1398 /* XXX stat + msg */ 1399 return ENOBUFS; 1400 } 1401 1402 data = &txq->data[txq->cur]; 1403 desc = &txq->desc[txq->cur]; 1404 1405 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs, 1406 &nsegs, 0); 1407 if (error != 0) { 1408 device_printf(sc->sc_dev, 1409 "could not map mbuf (error %d)\n", error); 1410 m_freem(mprot); 1411 return error; 1412 } 1413 1414 data->m = mprot; 1415 data->ni = ieee80211_ref_node(ni); 1416 /* ctl frames are not taken into account for amrr */ 1417 data->rix = IEEE80211_FIXED_RATE_NONE; 1418 1419 rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len, 1420 protrate, segs, 1, ac); 1421 1422 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1423 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1424 1425 txq->queued++; 1426 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1427 1428 return 0; 1429 } 1430 1431 static int 1432 rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, 1433 struct ieee80211_node *ni, int ac) 1434 { 1435 struct ieee80211vap *vap = ni->ni_vap; 1436 struct ieee80211com *ic = &sc->sc_ic; 1437 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1438 struct rt2661_tx_desc *desc; 1439 struct rt2661_tx_data *data; 1440 struct ieee80211_frame *wh; 1441 const struct ieee80211_txparam *tp; 1442 struct ieee80211_key *k; 1443 const struct chanAccParams *cap; 1444 struct mbuf *mnew; 1445 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1446 uint16_t dur; 1447 uint32_t flags; 1448 int error, nsegs, rate, noack = 0; 1449 1450 wh = mtod(m0, struct ieee80211_frame *); 1451 1452 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 1453 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1454 rate = tp->mcastrate; 1455 } else if (m0->m_flags & M_EAPOL) { 1456 rate = tp->mgmtrate; 1457 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1458 rate = tp->ucastrate; 1459 } else { 1460 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1461 rate = ni->ni_txrate; 1462 } 1463 rate &= IEEE80211_RATE_VAL; 1464 1465 if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) { 1466 cap = &ic->ic_wme.wme_chanParams; 1467 noack = cap->cap_wmeParams[ac].wmep_noackPolicy; 1468 } 1469 1470 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1471 k = ieee80211_crypto_encap(ni, m0); 1472 if (k == NULL) { 1473 m_freem(m0); 1474 return ENOBUFS; 1475 } 1476 1477 /* packet header may have moved, reset our local pointer */ 1478 wh = mtod(m0, struct ieee80211_frame *); 1479 } 1480 1481 flags = 0; 1482 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1483 int prot = IEEE80211_PROT_NONE; 1484 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1485 prot = IEEE80211_PROT_RTSCTS; 1486 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1487 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) 1488 prot = ic->ic_protmode; 1489 if (prot != IEEE80211_PROT_NONE) { 1490 error = rt2661_sendprot(sc, ac, m0, ni, prot, rate); 1491 if (error) { 1492 m_freem(m0); 1493 return error; 1494 } 1495 flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS; 1496 } 1497 } 1498 1499 data = &txq->data[txq->cur]; 1500 desc = &txq->desc[txq->cur]; 1501 1502 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, 1503 &nsegs, 0); 1504 if (error != 0 && error != EFBIG) { 1505 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1506 error); 1507 m_freem(m0); 1508 return error; 1509 } 1510 if (error != 0) { 1511 mnew = m_defrag(m0, M_NOWAIT); 1512 if (mnew == NULL) { 1513 device_printf(sc->sc_dev, 1514 "could not defragment mbuf\n"); 1515 m_freem(m0); 1516 return ENOBUFS; 1517 } 1518 m0 = mnew; 1519 1520 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, 1521 segs, &nsegs, 0); 1522 if (error != 0) { 1523 device_printf(sc->sc_dev, 1524 "could not map mbuf (error %d)\n", error); 1525 m_freem(m0); 1526 return error; 1527 } 1528 1529 /* packet header have moved, reset our local pointer */ 1530 wh = mtod(m0, struct ieee80211_frame *); 1531 } 1532 1533 if (ieee80211_radiotap_active_vap(vap)) { 1534 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1535 1536 tap->wt_flags = 0; 1537 tap->wt_rate = rate; 1538 1539 ieee80211_radiotap_tx(vap, m0); 1540 } 1541 1542 data->m = m0; 1543 data->ni = ni; 1544 1545 /* remember link conditions for rate adaptation algorithm */ 1546 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1547 data->rix = ni->ni_txrate; 1548 /* XXX probably need last rssi value and not avg */ 1549 data->rssi = ic->ic_node_getrssi(ni); 1550 } else 1551 data->rix = IEEE80211_FIXED_RATE_NONE; 1552 1553 if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1554 flags |= RT2661_TX_NEED_ACK; 1555 1556 dur = ieee80211_ack_duration(ic->ic_rt, 1557 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1558 *(uint16_t *)wh->i_dur = htole16(dur); 1559 } 1560 1561 rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs, 1562 nsegs, ac); 1563 1564 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1565 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1566 1567 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1568 m0->m_pkthdr.len, txq->cur, rate); 1569 1570 /* kick Tx */ 1571 txq->queued++; 1572 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1573 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac); 1574 1575 return 0; 1576 } 1577 1578 static int 1579 rt2661_transmit(struct ieee80211com *ic, struct mbuf *m) 1580 { 1581 struct rt2661_softc *sc = ic->ic_softc; 1582 int error; 1583 1584 RAL_LOCK(sc); 1585 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1586 RAL_UNLOCK(sc); 1587 return (ENXIO); 1588 } 1589 error = mbufq_enqueue(&sc->sc_snd, m); 1590 if (error) { 1591 RAL_UNLOCK(sc); 1592 return (error); 1593 } 1594 rt2661_start(sc); 1595 RAL_UNLOCK(sc); 1596 1597 return (0); 1598 } 1599 1600 static void 1601 rt2661_start(struct rt2661_softc *sc) 1602 { 1603 struct mbuf *m; 1604 struct ieee80211_node *ni; 1605 int ac; 1606 1607 RAL_LOCK_ASSERT(sc); 1608 1609 /* prevent management frames from being sent if we're not ready */ 1610 if (!(sc->sc_flags & RAL_RUNNING) || sc->sc_invalid) 1611 return; 1612 1613 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 1614 ac = M_WME_GETAC(m); 1615 if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) { 1616 /* there is no place left in this ring */ 1617 mbufq_prepend(&sc->sc_snd, m); 1618 break; 1619 } 1620 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1621 if (rt2661_tx_data(sc, m, ni, ac) != 0) { 1622 ieee80211_free_node(ni); 1623 if_inc_counter(ni->ni_vap->iv_ifp, 1624 IFCOUNTER_OERRORS, 1); 1625 break; 1626 } 1627 sc->sc_tx_timer = 5; 1628 } 1629 } 1630 1631 static int 1632 rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 1633 const struct ieee80211_bpf_params *params) 1634 { 1635 struct ieee80211com *ic = ni->ni_ic; 1636 struct rt2661_softc *sc = ic->ic_softc; 1637 1638 RAL_LOCK(sc); 1639 1640 /* prevent management frames from being sent if we're not ready */ 1641 if (!(sc->sc_flags & RAL_RUNNING)) { 1642 RAL_UNLOCK(sc); 1643 m_freem(m); 1644 return ENETDOWN; 1645 } 1646 if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { 1647 RAL_UNLOCK(sc); 1648 m_freem(m); 1649 return ENOBUFS; /* XXX */ 1650 } 1651 1652 /* 1653 * Legacy path; interpret frame contents to decide 1654 * precisely how to send the frame. 1655 * XXX raw path 1656 */ 1657 if (rt2661_tx_mgt(sc, m, ni) != 0) 1658 goto bad; 1659 sc->sc_tx_timer = 5; 1660 1661 RAL_UNLOCK(sc); 1662 1663 return 0; 1664 bad: 1665 RAL_UNLOCK(sc); 1666 return EIO; /* XXX */ 1667 } 1668 1669 static void 1670 rt2661_watchdog(void *arg) 1671 { 1672 struct rt2661_softc *sc = (struct rt2661_softc *)arg; 1673 1674 RAL_LOCK_ASSERT(sc); 1675 1676 KASSERT(sc->sc_flags & RAL_RUNNING, ("not running")); 1677 1678 if (sc->sc_invalid) /* card ejected */ 1679 return; 1680 1681 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1682 device_printf(sc->sc_dev, "device timeout\n"); 1683 rt2661_init_locked(sc); 1684 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 1685 /* NB: callout is reset in rt2661_init() */ 1686 return; 1687 } 1688 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 1689 } 1690 1691 static void 1692 rt2661_parent(struct ieee80211com *ic) 1693 { 1694 struct rt2661_softc *sc = ic->ic_softc; 1695 int startall = 0; 1696 1697 RAL_LOCK(sc); 1698 if (ic->ic_nrunning > 0) { 1699 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1700 rt2661_init_locked(sc); 1701 startall = 1; 1702 } else 1703 rt2661_update_promisc(ic); 1704 } else if (sc->sc_flags & RAL_RUNNING) 1705 rt2661_stop_locked(sc); 1706 RAL_UNLOCK(sc); 1707 if (startall) 1708 ieee80211_start_all(ic); 1709 } 1710 1711 static void 1712 rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) 1713 { 1714 uint32_t tmp; 1715 int ntries; 1716 1717 for (ntries = 0; ntries < 100; ntries++) { 1718 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1719 break; 1720 DELAY(1); 1721 } 1722 if (ntries == 100) { 1723 device_printf(sc->sc_dev, "could not write to BBP\n"); 1724 return; 1725 } 1726 1727 tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; 1728 RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); 1729 1730 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1731 } 1732 1733 static uint8_t 1734 rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) 1735 { 1736 uint32_t val; 1737 int ntries; 1738 1739 for (ntries = 0; ntries < 100; ntries++) { 1740 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1741 break; 1742 DELAY(1); 1743 } 1744 if (ntries == 100) { 1745 device_printf(sc->sc_dev, "could not read from BBP\n"); 1746 return 0; 1747 } 1748 1749 val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; 1750 RAL_WRITE(sc, RT2661_PHY_CSR3, val); 1751 1752 for (ntries = 0; ntries < 100; ntries++) { 1753 val = RAL_READ(sc, RT2661_PHY_CSR3); 1754 if (!(val & RT2661_BBP_BUSY)) 1755 return val & 0xff; 1756 DELAY(1); 1757 } 1758 1759 device_printf(sc->sc_dev, "could not read from BBP\n"); 1760 return 0; 1761 } 1762 1763 static void 1764 rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) 1765 { 1766 uint32_t tmp; 1767 int ntries; 1768 1769 for (ntries = 0; ntries < 100; ntries++) { 1770 if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) 1771 break; 1772 DELAY(1); 1773 } 1774 if (ntries == 100) { 1775 device_printf(sc->sc_dev, "could not write to RF\n"); 1776 return; 1777 } 1778 1779 tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | 1780 (reg & 3); 1781 RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); 1782 1783 /* remember last written value in sc */ 1784 sc->rf_regs[reg] = val; 1785 1786 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff); 1787 } 1788 1789 static int 1790 rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) 1791 { 1792 if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) 1793 return EIO; /* there is already a command pending */ 1794 1795 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 1796 RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); 1797 1798 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); 1799 1800 return 0; 1801 } 1802 1803 static void 1804 rt2661_select_antenna(struct rt2661_softc *sc) 1805 { 1806 uint8_t bbp4, bbp77; 1807 uint32_t tmp; 1808 1809 bbp4 = rt2661_bbp_read(sc, 4); 1810 bbp77 = rt2661_bbp_read(sc, 77); 1811 1812 /* TBD */ 1813 1814 /* make sure Rx is disabled before switching antenna */ 1815 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 1816 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 1817 1818 rt2661_bbp_write(sc, 4, bbp4); 1819 rt2661_bbp_write(sc, 77, bbp77); 1820 1821 /* restore Rx filter */ 1822 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 1823 } 1824 1825 /* 1826 * Enable multi-rate retries for frames sent at OFDM rates. 1827 * In 802.11b/g mode, allow fallback to CCK rates. 1828 */ 1829 static void 1830 rt2661_enable_mrr(struct rt2661_softc *sc) 1831 { 1832 struct ieee80211com *ic = &sc->sc_ic; 1833 uint32_t tmp; 1834 1835 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1836 1837 tmp &= ~RT2661_MRR_CCK_FALLBACK; 1838 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) 1839 tmp |= RT2661_MRR_CCK_FALLBACK; 1840 tmp |= RT2661_MRR_ENABLED; 1841 1842 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1843 } 1844 1845 static void 1846 rt2661_set_txpreamble(struct rt2661_softc *sc) 1847 { 1848 struct ieee80211com *ic = &sc->sc_ic; 1849 uint32_t tmp; 1850 1851 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1852 1853 tmp &= ~RT2661_SHORT_PREAMBLE; 1854 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1855 tmp |= RT2661_SHORT_PREAMBLE; 1856 1857 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1858 } 1859 1860 static void 1861 rt2661_set_basicrates(struct rt2661_softc *sc, 1862 const struct ieee80211_rateset *rs) 1863 { 1864 struct ieee80211com *ic = &sc->sc_ic; 1865 uint32_t mask = 0; 1866 uint8_t rate; 1867 int i; 1868 1869 for (i = 0; i < rs->rs_nrates; i++) { 1870 rate = rs->rs_rates[i]; 1871 1872 if (!(rate & IEEE80211_RATE_BASIC)) 1873 continue; 1874 1875 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, 1876 IEEE80211_RV(rate)); 1877 } 1878 1879 RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); 1880 1881 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 1882 } 1883 1884 /* 1885 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference 1886 * driver. 1887 */ 1888 static void 1889 rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) 1890 { 1891 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; 1892 uint32_t tmp; 1893 1894 /* update all BBP registers that depend on the band */ 1895 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; 1896 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; 1897 if (IEEE80211_IS_CHAN_5GHZ(c)) { 1898 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; 1899 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; 1900 } 1901 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1902 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1903 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; 1904 } 1905 1906 rt2661_bbp_write(sc, 17, bbp17); 1907 rt2661_bbp_write(sc, 96, bbp96); 1908 rt2661_bbp_write(sc, 104, bbp104); 1909 1910 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1911 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1912 rt2661_bbp_write(sc, 75, 0x80); 1913 rt2661_bbp_write(sc, 86, 0x80); 1914 rt2661_bbp_write(sc, 88, 0x80); 1915 } 1916 1917 rt2661_bbp_write(sc, 35, bbp35); 1918 rt2661_bbp_write(sc, 97, bbp97); 1919 rt2661_bbp_write(sc, 98, bbp98); 1920 1921 tmp = RAL_READ(sc, RT2661_PHY_CSR0); 1922 tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); 1923 if (IEEE80211_IS_CHAN_2GHZ(c)) 1924 tmp |= RT2661_PA_PE_2GHZ; 1925 else 1926 tmp |= RT2661_PA_PE_5GHZ; 1927 RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); 1928 } 1929 1930 static void 1931 rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) 1932 { 1933 struct ieee80211com *ic = &sc->sc_ic; 1934 const struct rfprog *rfprog; 1935 uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; 1936 int8_t power; 1937 u_int i, chan; 1938 1939 chan = ieee80211_chan2ieee(ic, c); 1940 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 1941 1942 /* select the appropriate RF settings based on what EEPROM says */ 1943 rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; 1944 1945 /* find the settings for this channel (we know it exists) */ 1946 for (i = 0; rfprog[i].chan != chan; i++); 1947 1948 power = sc->txpow[i]; 1949 if (power < 0) { 1950 bbp94 += power; 1951 power = 0; 1952 } else if (power > 31) { 1953 bbp94 += power - 31; 1954 power = 31; 1955 } 1956 1957 /* 1958 * If we are switching from the 2GHz band to the 5GHz band or 1959 * vice-versa, BBP registers need to be reprogrammed. 1960 */ 1961 if (c->ic_flags != sc->sc_curchan->ic_flags) { 1962 rt2661_select_band(sc, c); 1963 rt2661_select_antenna(sc); 1964 } 1965 sc->sc_curchan = c; 1966 1967 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1968 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1969 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 1970 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1971 1972 DELAY(200); 1973 1974 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1975 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1976 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); 1977 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1978 1979 DELAY(200); 1980 1981 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1982 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1983 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 1984 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1985 1986 /* enable smart mode for MIMO-capable RFs */ 1987 bbp3 = rt2661_bbp_read(sc, 3); 1988 1989 bbp3 &= ~RT2661_SMART_MODE; 1990 if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) 1991 bbp3 |= RT2661_SMART_MODE; 1992 1993 rt2661_bbp_write(sc, 3, bbp3); 1994 1995 if (bbp94 != RT2661_BBPR94_DEFAULT) 1996 rt2661_bbp_write(sc, 94, bbp94); 1997 1998 /* 5GHz radio needs a 1ms delay here */ 1999 if (IEEE80211_IS_CHAN_5GHZ(c)) 2000 DELAY(1000); 2001 } 2002 2003 static void 2004 rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) 2005 { 2006 uint32_t tmp; 2007 2008 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2009 RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); 2010 2011 tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; 2012 RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); 2013 } 2014 2015 static void 2016 rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) 2017 { 2018 uint32_t tmp; 2019 2020 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2021 RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); 2022 2023 tmp = addr[4] | addr[5] << 8; 2024 RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); 2025 } 2026 2027 static void 2028 rt2661_update_promisc(struct ieee80211com *ic) 2029 { 2030 struct rt2661_softc *sc = ic->ic_softc; 2031 uint32_t tmp; 2032 2033 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2034 2035 tmp &= ~RT2661_DROP_NOT_TO_ME; 2036 if (ic->ic_promisc == 0) 2037 tmp |= RT2661_DROP_NOT_TO_ME; 2038 2039 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2040 2041 DPRINTF(sc, "%s promiscuous mode\n", 2042 (ic->ic_promisc > 0) ? "entering" : "leaving"); 2043 } 2044 2045 /* 2046 * Update QoS (802.11e) settings for each h/w Tx ring. 2047 */ 2048 static int 2049 rt2661_wme_update(struct ieee80211com *ic) 2050 { 2051 struct rt2661_softc *sc = ic->ic_softc; 2052 const struct wmeParams *wmep; 2053 2054 wmep = ic->ic_wme.wme_chanParams.cap_wmeParams; 2055 2056 /* XXX: not sure about shifts. */ 2057 /* XXX: the reference driver plays with AC_VI settings too. */ 2058 2059 /* update TxOp */ 2060 RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, 2061 wmep[WME_AC_BE].wmep_txopLimit << 16 | 2062 wmep[WME_AC_BK].wmep_txopLimit); 2063 RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, 2064 wmep[WME_AC_VI].wmep_txopLimit << 16 | 2065 wmep[WME_AC_VO].wmep_txopLimit); 2066 2067 /* update CWmin */ 2068 RAL_WRITE(sc, RT2661_CWMIN_CSR, 2069 wmep[WME_AC_BE].wmep_logcwmin << 12 | 2070 wmep[WME_AC_BK].wmep_logcwmin << 8 | 2071 wmep[WME_AC_VI].wmep_logcwmin << 4 | 2072 wmep[WME_AC_VO].wmep_logcwmin); 2073 2074 /* update CWmax */ 2075 RAL_WRITE(sc, RT2661_CWMAX_CSR, 2076 wmep[WME_AC_BE].wmep_logcwmax << 12 | 2077 wmep[WME_AC_BK].wmep_logcwmax << 8 | 2078 wmep[WME_AC_VI].wmep_logcwmax << 4 | 2079 wmep[WME_AC_VO].wmep_logcwmax); 2080 2081 /* update Aifsn */ 2082 RAL_WRITE(sc, RT2661_AIFSN_CSR, 2083 wmep[WME_AC_BE].wmep_aifsn << 12 | 2084 wmep[WME_AC_BK].wmep_aifsn << 8 | 2085 wmep[WME_AC_VI].wmep_aifsn << 4 | 2086 wmep[WME_AC_VO].wmep_aifsn); 2087 2088 return 0; 2089 } 2090 2091 static void 2092 rt2661_update_slot(struct ieee80211com *ic) 2093 { 2094 struct rt2661_softc *sc = ic->ic_softc; 2095 uint8_t slottime; 2096 uint32_t tmp; 2097 2098 slottime = IEEE80211_GET_SLOTTIME(ic); 2099 2100 tmp = RAL_READ(sc, RT2661_MAC_CSR9); 2101 tmp = (tmp & ~0xff) | slottime; 2102 RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); 2103 } 2104 2105 static const char * 2106 rt2661_get_rf(int rev) 2107 { 2108 switch (rev) { 2109 case RT2661_RF_5225: return "RT5225"; 2110 case RT2661_RF_5325: return "RT5325 (MIMO XR)"; 2111 case RT2661_RF_2527: return "RT2527"; 2112 case RT2661_RF_2529: return "RT2529 (MIMO XR)"; 2113 default: return "unknown"; 2114 } 2115 } 2116 2117 static void 2118 rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2119 { 2120 uint16_t val; 2121 int i; 2122 2123 /* read MAC address */ 2124 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); 2125 macaddr[0] = val & 0xff; 2126 macaddr[1] = val >> 8; 2127 2128 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); 2129 macaddr[2] = val & 0xff; 2130 macaddr[3] = val >> 8; 2131 2132 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); 2133 macaddr[4] = val & 0xff; 2134 macaddr[5] = val >> 8; 2135 2136 val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); 2137 /* XXX: test if different from 0xffff? */ 2138 sc->rf_rev = (val >> 11) & 0x1f; 2139 sc->hw_radio = (val >> 10) & 0x1; 2140 sc->rx_ant = (val >> 4) & 0x3; 2141 sc->tx_ant = (val >> 2) & 0x3; 2142 sc->nb_ant = val & 0x3; 2143 2144 DPRINTF(sc, "RF revision=%d\n", sc->rf_rev); 2145 2146 val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); 2147 sc->ext_5ghz_lna = (val >> 6) & 0x1; 2148 sc->ext_2ghz_lna = (val >> 4) & 0x1; 2149 2150 DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", 2151 sc->ext_2ghz_lna, sc->ext_5ghz_lna); 2152 2153 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); 2154 if ((val & 0xff) != 0xff) 2155 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ 2156 2157 /* Only [-10, 10] is valid */ 2158 if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10) 2159 sc->rssi_2ghz_corr = 0; 2160 2161 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); 2162 if ((val & 0xff) != 0xff) 2163 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ 2164 2165 /* Only [-10, 10] is valid */ 2166 if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10) 2167 sc->rssi_5ghz_corr = 0; 2168 2169 /* adjust RSSI correction for external low-noise amplifier */ 2170 if (sc->ext_2ghz_lna) 2171 sc->rssi_2ghz_corr -= 14; 2172 if (sc->ext_5ghz_lna) 2173 sc->rssi_5ghz_corr -= 14; 2174 2175 DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", 2176 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); 2177 2178 val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); 2179 if ((val >> 8) != 0xff) 2180 sc->rfprog = (val >> 8) & 0x3; 2181 if ((val & 0xff) != 0xff) 2182 sc->rffreq = val & 0xff; 2183 2184 DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq); 2185 2186 /* read Tx power for all a/b/g channels */ 2187 for (i = 0; i < 19; i++) { 2188 val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); 2189 sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ 2190 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2191 rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]); 2192 sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ 2193 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2194 rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]); 2195 } 2196 2197 /* read vendor-specific BBP values */ 2198 for (i = 0; i < 16; i++) { 2199 val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); 2200 if (val == 0 || val == 0xffff) 2201 continue; /* skip invalid entries */ 2202 sc->bbp_prom[i].reg = val >> 8; 2203 sc->bbp_prom[i].val = val & 0xff; 2204 DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg, 2205 sc->bbp_prom[i].val); 2206 } 2207 } 2208 2209 static int 2210 rt2661_bbp_init(struct rt2661_softc *sc) 2211 { 2212 int i, ntries; 2213 uint8_t val; 2214 2215 /* wait for BBP to be ready */ 2216 for (ntries = 0; ntries < 100; ntries++) { 2217 val = rt2661_bbp_read(sc, 0); 2218 if (val != 0 && val != 0xff) 2219 break; 2220 DELAY(100); 2221 } 2222 if (ntries == 100) { 2223 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2224 return EIO; 2225 } 2226 2227 /* initialize BBP registers to default values */ 2228 for (i = 0; i < nitems(rt2661_def_bbp); i++) { 2229 rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, 2230 rt2661_def_bbp[i].val); 2231 } 2232 2233 /* write vendor-specific BBP values (from EEPROM) */ 2234 for (i = 0; i < 16; i++) { 2235 if (sc->bbp_prom[i].reg == 0) 2236 continue; 2237 rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2238 } 2239 2240 return 0; 2241 } 2242 2243 static void 2244 rt2661_init_locked(struct rt2661_softc *sc) 2245 { 2246 struct ieee80211com *ic = &sc->sc_ic; 2247 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2248 uint32_t tmp, sta[3]; 2249 int i, error, ntries; 2250 2251 RAL_LOCK_ASSERT(sc); 2252 2253 if ((sc->sc_flags & RAL_FW_LOADED) == 0) { 2254 error = rt2661_load_microcode(sc); 2255 if (error != 0) { 2256 device_printf(sc->sc_dev, 2257 "%s: could not load 8051 microcode, error %d\n", 2258 __func__, error); 2259 return; 2260 } 2261 sc->sc_flags |= RAL_FW_LOADED; 2262 } 2263 2264 rt2661_stop_locked(sc); 2265 2266 /* initialize Tx rings */ 2267 RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); 2268 RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); 2269 RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); 2270 RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); 2271 2272 /* initialize Mgt ring */ 2273 RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); 2274 2275 /* initialize Rx ring */ 2276 RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); 2277 2278 /* initialize Tx rings sizes */ 2279 RAL_WRITE(sc, RT2661_TX_RING_CSR0, 2280 RT2661_TX_RING_COUNT << 24 | 2281 RT2661_TX_RING_COUNT << 16 | 2282 RT2661_TX_RING_COUNT << 8 | 2283 RT2661_TX_RING_COUNT); 2284 2285 RAL_WRITE(sc, RT2661_TX_RING_CSR1, 2286 RT2661_TX_DESC_WSIZE << 16 | 2287 RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ 2288 RT2661_MGT_RING_COUNT); 2289 2290 /* initialize Rx rings */ 2291 RAL_WRITE(sc, RT2661_RX_RING_CSR, 2292 RT2661_RX_DESC_BACK << 16 | 2293 RT2661_RX_DESC_WSIZE << 8 | 2294 RT2661_RX_RING_COUNT); 2295 2296 /* XXX: some magic here */ 2297 RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); 2298 2299 /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ 2300 RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); 2301 2302 /* load base address of Rx ring */ 2303 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); 2304 2305 /* initialize MAC registers to default values */ 2306 for (i = 0; i < nitems(rt2661_def_mac); i++) 2307 RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); 2308 2309 rt2661_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 2310 2311 /* set host ready */ 2312 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2313 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2314 2315 /* wait for BBP/RF to wakeup */ 2316 for (ntries = 0; ntries < 1000; ntries++) { 2317 if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) 2318 break; 2319 DELAY(1000); 2320 } 2321 if (ntries == 1000) { 2322 printf("timeout waiting for BBP/RF to wakeup\n"); 2323 rt2661_stop_locked(sc); 2324 return; 2325 } 2326 2327 if (rt2661_bbp_init(sc) != 0) { 2328 rt2661_stop_locked(sc); 2329 return; 2330 } 2331 2332 /* select default channel */ 2333 sc->sc_curchan = ic->ic_curchan; 2334 rt2661_select_band(sc, sc->sc_curchan); 2335 rt2661_select_antenna(sc); 2336 rt2661_set_chan(sc, sc->sc_curchan); 2337 2338 /* update Rx filter */ 2339 tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; 2340 2341 tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; 2342 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2343 tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | 2344 RT2661_DROP_ACKCTS; 2345 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 2346 ic->ic_opmode != IEEE80211_M_MBSS) 2347 tmp |= RT2661_DROP_TODS; 2348 if (ic->ic_promisc == 0) 2349 tmp |= RT2661_DROP_NOT_TO_ME; 2350 } 2351 2352 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2353 2354 /* clear STA registers */ 2355 RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, nitems(sta)); 2356 2357 /* initialize ASIC */ 2358 RAL_WRITE(sc, RT2661_MAC_CSR1, 4); 2359 2360 /* clear any pending interrupt */ 2361 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2362 2363 /* enable interrupts */ 2364 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 2365 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 2366 2367 /* kick Rx */ 2368 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); 2369 2370 sc->sc_flags |= RAL_RUNNING; 2371 2372 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 2373 } 2374 2375 static void 2376 rt2661_init(void *priv) 2377 { 2378 struct rt2661_softc *sc = priv; 2379 struct ieee80211com *ic = &sc->sc_ic; 2380 2381 RAL_LOCK(sc); 2382 rt2661_init_locked(sc); 2383 RAL_UNLOCK(sc); 2384 2385 if (sc->sc_flags & RAL_RUNNING) 2386 ieee80211_start_all(ic); /* start all vap's */ 2387 } 2388 2389 void 2390 rt2661_stop_locked(struct rt2661_softc *sc) 2391 { 2392 volatile int *flags = &sc->sc_flags; 2393 uint32_t tmp; 2394 2395 while (*flags & RAL_INPUT_RUNNING) 2396 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2397 2398 callout_stop(&sc->watchdog_ch); 2399 sc->sc_tx_timer = 0; 2400 2401 if (sc->sc_flags & RAL_RUNNING) { 2402 sc->sc_flags &= ~RAL_RUNNING; 2403 2404 /* abort Tx (for all 5 Tx rings) */ 2405 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); 2406 2407 /* disable Rx (value remains after reset!) */ 2408 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2409 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2410 2411 /* reset ASIC */ 2412 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2413 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2414 2415 /* disable interrupts */ 2416 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff); 2417 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 2418 2419 /* clear any pending interrupt */ 2420 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2421 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); 2422 2423 /* reset Tx and Rx rings */ 2424 rt2661_reset_tx_ring(sc, &sc->txq[0]); 2425 rt2661_reset_tx_ring(sc, &sc->txq[1]); 2426 rt2661_reset_tx_ring(sc, &sc->txq[2]); 2427 rt2661_reset_tx_ring(sc, &sc->txq[3]); 2428 rt2661_reset_tx_ring(sc, &sc->mgtq); 2429 rt2661_reset_rx_ring(sc, &sc->rxq); 2430 } 2431 } 2432 2433 void 2434 rt2661_stop(void *priv) 2435 { 2436 struct rt2661_softc *sc = priv; 2437 2438 RAL_LOCK(sc); 2439 rt2661_stop_locked(sc); 2440 RAL_UNLOCK(sc); 2441 } 2442 2443 static int 2444 rt2661_load_microcode(struct rt2661_softc *sc) 2445 { 2446 const struct firmware *fp; 2447 const char *imagename; 2448 int ntries, error; 2449 2450 RAL_LOCK_ASSERT(sc); 2451 2452 switch (sc->sc_id) { 2453 case 0x0301: imagename = "rt2561sfw"; break; 2454 case 0x0302: imagename = "rt2561fw"; break; 2455 case 0x0401: imagename = "rt2661fw"; break; 2456 default: 2457 device_printf(sc->sc_dev, "%s: unexpected pci device id 0x%x, " 2458 "don't know how to retrieve firmware\n", 2459 __func__, sc->sc_id); 2460 return EINVAL; 2461 } 2462 RAL_UNLOCK(sc); 2463 fp = firmware_get(imagename); 2464 RAL_LOCK(sc); 2465 if (fp == NULL) { 2466 device_printf(sc->sc_dev, 2467 "%s: unable to retrieve firmware image %s\n", 2468 __func__, imagename); 2469 return EINVAL; 2470 } 2471 2472 /* 2473 * Load 8051 microcode into NIC. 2474 */ 2475 /* reset 8051 */ 2476 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2477 2478 /* cancel any pending Host to MCU command */ 2479 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); 2480 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 2481 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); 2482 2483 /* write 8051's microcode */ 2484 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); 2485 RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize); 2486 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2487 2488 /* kick 8051's ass */ 2489 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); 2490 2491 /* wait for 8051 to initialize */ 2492 for (ntries = 0; ntries < 500; ntries++) { 2493 if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) 2494 break; 2495 DELAY(100); 2496 } 2497 if (ntries == 500) { 2498 device_printf(sc->sc_dev, 2499 "%s: timeout waiting for MCU to initialize\n", __func__); 2500 error = EIO; 2501 } else 2502 error = 0; 2503 2504 firmware_put(fp, FIRMWARE_UNLOAD); 2505 return error; 2506 } 2507 2508 #ifdef notyet 2509 /* 2510 * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and 2511 * false CCA count. This function is called periodically (every seconds) when 2512 * in the RUN state. Values taken from the reference driver. 2513 */ 2514 static void 2515 rt2661_rx_tune(struct rt2661_softc *sc) 2516 { 2517 uint8_t bbp17; 2518 uint16_t cca; 2519 int lo, hi, dbm; 2520 2521 /* 2522 * Tuning range depends on operating band and on the presence of an 2523 * external low-noise amplifier. 2524 */ 2525 lo = 0x20; 2526 if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) 2527 lo += 0x08; 2528 if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || 2529 (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) 2530 lo += 0x10; 2531 hi = lo + 0x20; 2532 2533 /* retrieve false CCA count since last call (clear on read) */ 2534 cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; 2535 2536 if (dbm >= -35) { 2537 bbp17 = 0x60; 2538 } else if (dbm >= -58) { 2539 bbp17 = hi; 2540 } else if (dbm >= -66) { 2541 bbp17 = lo + 0x10; 2542 } else if (dbm >= -74) { 2543 bbp17 = lo + 0x08; 2544 } else { 2545 /* RSSI < -74dBm, tune using false CCA count */ 2546 2547 bbp17 = sc->bbp17; /* current value */ 2548 2549 hi -= 2 * (-74 - dbm); 2550 if (hi < lo) 2551 hi = lo; 2552 2553 if (bbp17 > hi) { 2554 bbp17 = hi; 2555 2556 } else if (cca > 512) { 2557 if (++bbp17 > hi) 2558 bbp17 = hi; 2559 } else if (cca < 100) { 2560 if (--bbp17 < lo) 2561 bbp17 = lo; 2562 } 2563 } 2564 2565 if (bbp17 != sc->bbp17) { 2566 rt2661_bbp_write(sc, 17, bbp17); 2567 sc->bbp17 = bbp17; 2568 } 2569 } 2570 2571 /* 2572 * Enter/Leave radar detection mode. 2573 * This is for 802.11h additional regulatory domains. 2574 */ 2575 static void 2576 rt2661_radar_start(struct rt2661_softc *sc) 2577 { 2578 uint32_t tmp; 2579 2580 /* disable Rx */ 2581 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2582 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2583 2584 rt2661_bbp_write(sc, 82, 0x20); 2585 rt2661_bbp_write(sc, 83, 0x00); 2586 rt2661_bbp_write(sc, 84, 0x40); 2587 2588 /* save current BBP registers values */ 2589 sc->bbp18 = rt2661_bbp_read(sc, 18); 2590 sc->bbp21 = rt2661_bbp_read(sc, 21); 2591 sc->bbp22 = rt2661_bbp_read(sc, 22); 2592 sc->bbp16 = rt2661_bbp_read(sc, 16); 2593 sc->bbp17 = rt2661_bbp_read(sc, 17); 2594 sc->bbp64 = rt2661_bbp_read(sc, 64); 2595 2596 rt2661_bbp_write(sc, 18, 0xff); 2597 rt2661_bbp_write(sc, 21, 0x3f); 2598 rt2661_bbp_write(sc, 22, 0x3f); 2599 rt2661_bbp_write(sc, 16, 0xbd); 2600 rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); 2601 rt2661_bbp_write(sc, 64, 0x21); 2602 2603 /* restore Rx filter */ 2604 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2605 } 2606 2607 static int 2608 rt2661_radar_stop(struct rt2661_softc *sc) 2609 { 2610 uint8_t bbp66; 2611 2612 /* read radar detection result */ 2613 bbp66 = rt2661_bbp_read(sc, 66); 2614 2615 /* restore BBP registers values */ 2616 rt2661_bbp_write(sc, 16, sc->bbp16); 2617 rt2661_bbp_write(sc, 17, sc->bbp17); 2618 rt2661_bbp_write(sc, 18, sc->bbp18); 2619 rt2661_bbp_write(sc, 21, sc->bbp21); 2620 rt2661_bbp_write(sc, 22, sc->bbp22); 2621 rt2661_bbp_write(sc, 64, sc->bbp64); 2622 2623 return bbp66 == 1; 2624 } 2625 #endif 2626 2627 static int 2628 rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap) 2629 { 2630 struct ieee80211com *ic = vap->iv_ic; 2631 struct rt2661_tx_desc desc; 2632 struct mbuf *m0; 2633 int rate; 2634 2635 if ((m0 = ieee80211_beacon_alloc(vap->iv_bss))== NULL) { 2636 device_printf(sc->sc_dev, "could not allocate beacon frame\n"); 2637 return ENOBUFS; 2638 } 2639 2640 /* send beacons at the lowest available rate */ 2641 rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2; 2642 2643 rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, 2644 m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); 2645 2646 /* copy the first 24 bytes of Tx descriptor into NIC memory */ 2647 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); 2648 2649 /* copy beacon header and payload into NIC memory */ 2650 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, 2651 mtod(m0, uint8_t *), m0->m_pkthdr.len); 2652 2653 m_freem(m0); 2654 2655 return 0; 2656 } 2657 2658 /* 2659 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS 2660 * and HostAP operating modes. 2661 */ 2662 static void 2663 rt2661_enable_tsf_sync(struct rt2661_softc *sc) 2664 { 2665 struct ieee80211com *ic = &sc->sc_ic; 2666 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2667 uint32_t tmp; 2668 2669 if (vap->iv_opmode != IEEE80211_M_STA) { 2670 /* 2671 * Change default 16ms TBTT adjustment to 8ms. 2672 * Must be done before enabling beacon generation. 2673 */ 2674 RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); 2675 } 2676 2677 tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; 2678 2679 /* set beacon interval (in 1/16ms unit) */ 2680 tmp |= vap->iv_bss->ni_intval * 16; 2681 2682 tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; 2683 if (vap->iv_opmode == IEEE80211_M_STA) 2684 tmp |= RT2661_TSF_MODE(1); 2685 else 2686 tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; 2687 2688 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); 2689 } 2690 2691 static void 2692 rt2661_enable_tsf(struct rt2661_softc *sc) 2693 { 2694 RAL_WRITE(sc, RT2661_TXRX_CSR9, 2695 (RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000) 2696 | RT2661_TSF_TICKING | RT2661_TSF_MODE(2)); 2697 } 2698 2699 /* 2700 * Retrieve the "Received Signal Strength Indicator" from the raw values 2701 * contained in Rx descriptors. The computation depends on which band the 2702 * frame was received. Correction values taken from the reference driver. 2703 */ 2704 static int 2705 rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) 2706 { 2707 int lna, agc, rssi; 2708 2709 lna = (raw >> 5) & 0x3; 2710 agc = raw & 0x1f; 2711 2712 if (lna == 0) { 2713 /* 2714 * No mapping available. 2715 * 2716 * NB: Since RSSI is relative to noise floor, -1 is 2717 * adequate for caller to know error happened. 2718 */ 2719 return -1; 2720 } 2721 2722 rssi = (2 * agc) - RT2661_NOISE_FLOOR; 2723 2724 if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { 2725 rssi += sc->rssi_2ghz_corr; 2726 2727 if (lna == 1) 2728 rssi -= 64; 2729 else if (lna == 2) 2730 rssi -= 74; 2731 else if (lna == 3) 2732 rssi -= 90; 2733 } else { 2734 rssi += sc->rssi_5ghz_corr; 2735 2736 if (lna == 1) 2737 rssi -= 64; 2738 else if (lna == 2) 2739 rssi -= 86; 2740 else if (lna == 3) 2741 rssi -= 100; 2742 } 2743 return rssi; 2744 } 2745 2746 static void 2747 rt2661_scan_start(struct ieee80211com *ic) 2748 { 2749 struct rt2661_softc *sc = ic->ic_softc; 2750 uint32_t tmp; 2751 2752 /* abort TSF synchronization */ 2753 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 2754 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff); 2755 rt2661_set_bssid(sc, ieee80211broadcastaddr); 2756 } 2757 2758 static void 2759 rt2661_scan_end(struct ieee80211com *ic) 2760 { 2761 struct rt2661_softc *sc = ic->ic_softc; 2762 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2763 2764 rt2661_enable_tsf_sync(sc); 2765 /* XXX keep local copy */ 2766 rt2661_set_bssid(sc, vap->iv_bss->ni_bssid); 2767 } 2768 2769 static void 2770 rt2661_getradiocaps(struct ieee80211com *ic, 2771 int maxchans, int *nchans, struct ieee80211_channel chans[]) 2772 { 2773 struct rt2661_softc *sc = ic->ic_softc; 2774 uint8_t bands[IEEE80211_MODE_BYTES]; 2775 2776 memset(bands, 0, sizeof(bands)); 2777 setbit(bands, IEEE80211_MODE_11B); 2778 setbit(bands, IEEE80211_MODE_11G); 2779 ieee80211_add_channel_list_2ghz(chans, maxchans, nchans, 2780 rt2661_chan_2ghz, nitems(rt2661_chan_2ghz), bands, 0); 2781 2782 if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) { 2783 setbit(bands, IEEE80211_MODE_11A); 2784 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, 2785 rt2661_chan_5ghz, nitems(rt2661_chan_5ghz), bands, 0); 2786 } 2787 } 2788 2789 static void 2790 rt2661_set_channel(struct ieee80211com *ic) 2791 { 2792 struct rt2661_softc *sc = ic->ic_softc; 2793 2794 RAL_LOCK(sc); 2795 rt2661_set_chan(sc, ic->ic_curchan); 2796 RAL_UNLOCK(sc); 2797 2798 } 2799