1 /* $FreeBSD$ */ 2 3 /*- 4 * Copyright (c) 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2561, RT2561S and RT2661 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/module.h> 39 #include <sys/bus.h> 40 #include <sys/endian.h> 41 #include <sys/firmware.h> 42 43 #include <machine/bus.h> 44 #include <machine/resource.h> 45 #include <sys/rman.h> 46 47 #include <net/bpf.h> 48 #include <net/if.h> 49 #include <net/if_var.h> 50 #include <net/if_arp.h> 51 #include <net/ethernet.h> 52 #include <net/if_dl.h> 53 #include <net/if_media.h> 54 #include <net/if_types.h> 55 56 #include <net80211/ieee80211_var.h> 57 #include <net80211/ieee80211_radiotap.h> 58 #include <net80211/ieee80211_regdomain.h> 59 #include <net80211/ieee80211_ratectl.h> 60 61 #include <netinet/in.h> 62 #include <netinet/in_systm.h> 63 #include <netinet/in_var.h> 64 #include <netinet/ip.h> 65 #include <netinet/if_ether.h> 66 67 #include <dev/ral/rt2661reg.h> 68 #include <dev/ral/rt2661var.h> 69 70 #define RAL_DEBUG 71 #ifdef RAL_DEBUG 72 #define DPRINTF(sc, fmt, ...) do { \ 73 if (sc->sc_debug > 0) \ 74 printf(fmt, __VA_ARGS__); \ 75 } while (0) 76 #define DPRINTFN(sc, n, fmt, ...) do { \ 77 if (sc->sc_debug >= (n)) \ 78 printf(fmt, __VA_ARGS__); \ 79 } while (0) 80 #else 81 #define DPRINTF(sc, fmt, ...) 82 #define DPRINTFN(sc, n, fmt, ...) 83 #endif 84 85 static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *, 86 const char [IFNAMSIZ], int, enum ieee80211_opmode, 87 int, const uint8_t [IEEE80211_ADDR_LEN], 88 const uint8_t [IEEE80211_ADDR_LEN]); 89 static void rt2661_vap_delete(struct ieee80211vap *); 90 static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int, 91 int); 92 static int rt2661_alloc_tx_ring(struct rt2661_softc *, 93 struct rt2661_tx_ring *, int); 94 static void rt2661_reset_tx_ring(struct rt2661_softc *, 95 struct rt2661_tx_ring *); 96 static void rt2661_free_tx_ring(struct rt2661_softc *, 97 struct rt2661_tx_ring *); 98 static int rt2661_alloc_rx_ring(struct rt2661_softc *, 99 struct rt2661_rx_ring *, int); 100 static void rt2661_reset_rx_ring(struct rt2661_softc *, 101 struct rt2661_rx_ring *); 102 static void rt2661_free_rx_ring(struct rt2661_softc *, 103 struct rt2661_rx_ring *); 104 static int rt2661_newstate(struct ieee80211vap *, 105 enum ieee80211_state, int); 106 static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); 107 static void rt2661_rx_intr(struct rt2661_softc *); 108 static void rt2661_tx_intr(struct rt2661_softc *); 109 static void rt2661_tx_dma_intr(struct rt2661_softc *, 110 struct rt2661_tx_ring *); 111 static void rt2661_mcu_beacon_expire(struct rt2661_softc *); 112 static void rt2661_mcu_wakeup(struct rt2661_softc *); 113 static void rt2661_mcu_cmd_intr(struct rt2661_softc *); 114 static void rt2661_scan_start(struct ieee80211com *); 115 static void rt2661_scan_end(struct ieee80211com *); 116 static void rt2661_getradiocaps(struct ieee80211com *, int, int *, 117 struct ieee80211_channel[]); 118 static void rt2661_set_channel(struct ieee80211com *); 119 static void rt2661_setup_tx_desc(struct rt2661_softc *, 120 struct rt2661_tx_desc *, uint32_t, uint16_t, int, 121 int, const bus_dma_segment_t *, int, int); 122 static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, 123 struct ieee80211_node *, int); 124 static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, 125 struct ieee80211_node *); 126 static int rt2661_transmit(struct ieee80211com *, struct mbuf *); 127 static void rt2661_start(struct rt2661_softc *); 128 static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *, 129 const struct ieee80211_bpf_params *); 130 static void rt2661_watchdog(void *); 131 static void rt2661_parent(struct ieee80211com *); 132 static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, 133 uint8_t); 134 static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); 135 static void rt2661_rf_write(struct rt2661_softc *, uint8_t, 136 uint32_t); 137 static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, 138 uint16_t); 139 static void rt2661_select_antenna(struct rt2661_softc *); 140 static void rt2661_enable_mrr(struct rt2661_softc *); 141 static void rt2661_set_txpreamble(struct rt2661_softc *); 142 static void rt2661_set_basicrates(struct rt2661_softc *, 143 const struct ieee80211_rateset *); 144 static void rt2661_select_band(struct rt2661_softc *, 145 struct ieee80211_channel *); 146 static void rt2661_set_chan(struct rt2661_softc *, 147 struct ieee80211_channel *); 148 static void rt2661_set_bssid(struct rt2661_softc *, 149 const uint8_t *); 150 static void rt2661_set_macaddr(struct rt2661_softc *, 151 const uint8_t *); 152 static void rt2661_update_promisc(struct ieee80211com *); 153 static int rt2661_wme_update(struct ieee80211com *) __unused; 154 static void rt2661_update_slot(struct ieee80211com *); 155 static const char *rt2661_get_rf(int); 156 static void rt2661_read_eeprom(struct rt2661_softc *, 157 uint8_t macaddr[IEEE80211_ADDR_LEN]); 158 static int rt2661_bbp_init(struct rt2661_softc *); 159 static void rt2661_init_locked(struct rt2661_softc *); 160 static void rt2661_init(void *); 161 static void rt2661_stop_locked(struct rt2661_softc *); 162 static void rt2661_stop(void *); 163 static int rt2661_load_microcode(struct rt2661_softc *); 164 #ifdef notyet 165 static void rt2661_rx_tune(struct rt2661_softc *); 166 static void rt2661_radar_start(struct rt2661_softc *); 167 static int rt2661_radar_stop(struct rt2661_softc *); 168 #endif 169 static int rt2661_prepare_beacon(struct rt2661_softc *, 170 struct ieee80211vap *); 171 static void rt2661_enable_tsf_sync(struct rt2661_softc *); 172 static void rt2661_enable_tsf(struct rt2661_softc *); 173 static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); 174 175 static const struct { 176 uint32_t reg; 177 uint32_t val; 178 } rt2661_def_mac[] = { 179 RT2661_DEF_MAC 180 }; 181 182 static const struct { 183 uint8_t reg; 184 uint8_t val; 185 } rt2661_def_bbp[] = { 186 RT2661_DEF_BBP 187 }; 188 189 static const struct rfprog { 190 uint8_t chan; 191 uint32_t r1, r2, r3, r4; 192 } rt2661_rf5225_1[] = { 193 RT2661_RF5225_1 194 }, rt2661_rf5225_2[] = { 195 RT2661_RF5225_2 196 }; 197 198 static const uint8_t rt2661_chan_5ghz[] = 199 { 36, 40, 44, 48, 52, 56, 60, 64, 200 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 201 149, 153, 157, 161, 165 }; 202 203 int 204 rt2661_attach(device_t dev, int id) 205 { 206 struct rt2661_softc *sc = device_get_softc(dev); 207 struct ieee80211com *ic = &sc->sc_ic; 208 uint32_t val; 209 int error, ac, ntries; 210 211 sc->sc_id = id; 212 sc->sc_dev = dev; 213 214 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 215 MTX_DEF | MTX_RECURSE); 216 217 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 218 mbufq_init(&sc->sc_snd, ifqmaxlen); 219 220 /* wait for NIC to initialize */ 221 for (ntries = 0; ntries < 1000; ntries++) { 222 if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) 223 break; 224 DELAY(1000); 225 } 226 if (ntries == 1000) { 227 device_printf(sc->sc_dev, 228 "timeout waiting for NIC to initialize\n"); 229 error = EIO; 230 goto fail1; 231 } 232 233 /* retrieve RF rev. no and various other things from EEPROM */ 234 rt2661_read_eeprom(sc, ic->ic_macaddr); 235 236 device_printf(dev, "MAC/BBP RT%X, RF %s\n", val, 237 rt2661_get_rf(sc->rf_rev)); 238 239 /* 240 * Allocate Tx and Rx rings. 241 */ 242 for (ac = 0; ac < 4; ac++) { 243 error = rt2661_alloc_tx_ring(sc, &sc->txq[ac], 244 RT2661_TX_RING_COUNT); 245 if (error != 0) { 246 device_printf(sc->sc_dev, 247 "could not allocate Tx ring %d\n", ac); 248 goto fail2; 249 } 250 } 251 252 error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); 253 if (error != 0) { 254 device_printf(sc->sc_dev, "could not allocate Mgt ring\n"); 255 goto fail2; 256 } 257 258 error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); 259 if (error != 0) { 260 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 261 goto fail3; 262 } 263 264 ic->ic_softc = sc; 265 ic->ic_name = device_get_nameunit(dev); 266 ic->ic_opmode = IEEE80211_M_STA; 267 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 268 269 /* set device capabilities */ 270 ic->ic_caps = 271 IEEE80211_C_STA /* station mode */ 272 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 273 | IEEE80211_C_HOSTAP /* hostap mode */ 274 | IEEE80211_C_MONITOR /* monitor mode */ 275 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 276 | IEEE80211_C_WDS /* 4-address traffic works */ 277 | IEEE80211_C_MBSS /* mesh point link mode */ 278 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 279 | IEEE80211_C_SHSLOT /* short slot time supported */ 280 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 281 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 282 #ifdef notyet 283 | IEEE80211_C_TXFRAG /* handle tx frags */ 284 | IEEE80211_C_WME /* 802.11e */ 285 #endif 286 ; 287 288 rt2661_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 289 ic->ic_channels); 290 291 ieee80211_ifattach(ic); 292 #if 0 293 ic->ic_wme.wme_update = rt2661_wme_update; 294 #endif 295 ic->ic_scan_start = rt2661_scan_start; 296 ic->ic_scan_end = rt2661_scan_end; 297 ic->ic_getradiocaps = rt2661_getradiocaps; 298 ic->ic_set_channel = rt2661_set_channel; 299 ic->ic_updateslot = rt2661_update_slot; 300 ic->ic_update_promisc = rt2661_update_promisc; 301 ic->ic_raw_xmit = rt2661_raw_xmit; 302 ic->ic_transmit = rt2661_transmit; 303 ic->ic_parent = rt2661_parent; 304 ic->ic_vap_create = rt2661_vap_create; 305 ic->ic_vap_delete = rt2661_vap_delete; 306 307 ieee80211_radiotap_attach(ic, 308 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 309 RT2661_TX_RADIOTAP_PRESENT, 310 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 311 RT2661_RX_RADIOTAP_PRESENT); 312 313 #ifdef RAL_DEBUG 314 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 315 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 316 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 317 #endif 318 if (bootverbose) 319 ieee80211_announce(ic); 320 321 return 0; 322 323 fail3: rt2661_free_tx_ring(sc, &sc->mgtq); 324 fail2: while (--ac >= 0) 325 rt2661_free_tx_ring(sc, &sc->txq[ac]); 326 fail1: mtx_destroy(&sc->sc_mtx); 327 return error; 328 } 329 330 int 331 rt2661_detach(void *xsc) 332 { 333 struct rt2661_softc *sc = xsc; 334 struct ieee80211com *ic = &sc->sc_ic; 335 336 RAL_LOCK(sc); 337 rt2661_stop_locked(sc); 338 RAL_UNLOCK(sc); 339 340 ieee80211_ifdetach(ic); 341 mbufq_drain(&sc->sc_snd); 342 343 rt2661_free_tx_ring(sc, &sc->txq[0]); 344 rt2661_free_tx_ring(sc, &sc->txq[1]); 345 rt2661_free_tx_ring(sc, &sc->txq[2]); 346 rt2661_free_tx_ring(sc, &sc->txq[3]); 347 rt2661_free_tx_ring(sc, &sc->mgtq); 348 rt2661_free_rx_ring(sc, &sc->rxq); 349 350 mtx_destroy(&sc->sc_mtx); 351 352 return 0; 353 } 354 355 static struct ieee80211vap * 356 rt2661_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 357 enum ieee80211_opmode opmode, int flags, 358 const uint8_t bssid[IEEE80211_ADDR_LEN], 359 const uint8_t mac[IEEE80211_ADDR_LEN]) 360 { 361 struct rt2661_softc *sc = ic->ic_softc; 362 struct rt2661_vap *rvp; 363 struct ieee80211vap *vap; 364 365 switch (opmode) { 366 case IEEE80211_M_STA: 367 case IEEE80211_M_IBSS: 368 case IEEE80211_M_AHDEMO: 369 case IEEE80211_M_MONITOR: 370 case IEEE80211_M_HOSTAP: 371 case IEEE80211_M_MBSS: 372 /* XXXRP: TBD */ 373 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 374 device_printf(sc->sc_dev, "only 1 vap supported\n"); 375 return NULL; 376 } 377 if (opmode == IEEE80211_M_STA) 378 flags |= IEEE80211_CLONE_NOBEACONS; 379 break; 380 case IEEE80211_M_WDS: 381 if (TAILQ_EMPTY(&ic->ic_vaps) || 382 ic->ic_opmode != IEEE80211_M_HOSTAP) { 383 device_printf(sc->sc_dev, 384 "wds only supported in ap mode\n"); 385 return NULL; 386 } 387 /* 388 * Silently remove any request for a unique 389 * bssid; WDS vap's always share the local 390 * mac address. 391 */ 392 flags &= ~IEEE80211_CLONE_BSSID; 393 break; 394 default: 395 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 396 return NULL; 397 } 398 rvp = malloc(sizeof(struct rt2661_vap), M_80211_VAP, M_WAITOK | M_ZERO); 399 vap = &rvp->ral_vap; 400 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 401 402 /* override state transition machine */ 403 rvp->ral_newstate = vap->iv_newstate; 404 vap->iv_newstate = rt2661_newstate; 405 #if 0 406 vap->iv_update_beacon = rt2661_beacon_update; 407 #endif 408 409 ieee80211_ratectl_init(vap); 410 /* complete setup */ 411 ieee80211_vap_attach(vap, ieee80211_media_change, 412 ieee80211_media_status, mac); 413 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 414 ic->ic_opmode = opmode; 415 return vap; 416 } 417 418 static void 419 rt2661_vap_delete(struct ieee80211vap *vap) 420 { 421 struct rt2661_vap *rvp = RT2661_VAP(vap); 422 423 ieee80211_ratectl_deinit(vap); 424 ieee80211_vap_detach(vap); 425 free(rvp, M_80211_VAP); 426 } 427 428 void 429 rt2661_shutdown(void *xsc) 430 { 431 struct rt2661_softc *sc = xsc; 432 433 rt2661_stop(sc); 434 } 435 436 void 437 rt2661_suspend(void *xsc) 438 { 439 struct rt2661_softc *sc = xsc; 440 441 rt2661_stop(sc); 442 } 443 444 void 445 rt2661_resume(void *xsc) 446 { 447 struct rt2661_softc *sc = xsc; 448 449 if (sc->sc_ic.ic_nrunning > 0) 450 rt2661_init(sc); 451 } 452 453 static void 454 rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 455 { 456 if (error != 0) 457 return; 458 459 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 460 461 *(bus_addr_t *)arg = segs[0].ds_addr; 462 } 463 464 static int 465 rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, 466 int count) 467 { 468 int i, error; 469 470 ring->count = count; 471 ring->queued = 0; 472 ring->cur = ring->next = ring->stat = 0; 473 474 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 475 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 476 count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 477 0, NULL, NULL, &ring->desc_dmat); 478 if (error != 0) { 479 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 480 goto fail; 481 } 482 483 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 484 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 485 if (error != 0) { 486 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 487 goto fail; 488 } 489 490 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 491 count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 492 0); 493 if (error != 0) { 494 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 495 goto fail; 496 } 497 498 ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, 499 M_NOWAIT | M_ZERO); 500 if (ring->data == NULL) { 501 device_printf(sc->sc_dev, "could not allocate soft data\n"); 502 error = ENOMEM; 503 goto fail; 504 } 505 506 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 507 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 508 RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 509 if (error != 0) { 510 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 511 goto fail; 512 } 513 514 for (i = 0; i < count; i++) { 515 error = bus_dmamap_create(ring->data_dmat, 0, 516 &ring->data[i].map); 517 if (error != 0) { 518 device_printf(sc->sc_dev, "could not create DMA map\n"); 519 goto fail; 520 } 521 } 522 523 return 0; 524 525 fail: rt2661_free_tx_ring(sc, ring); 526 return error; 527 } 528 529 static void 530 rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 531 { 532 struct rt2661_tx_desc *desc; 533 struct rt2661_tx_data *data; 534 int i; 535 536 for (i = 0; i < ring->count; i++) { 537 desc = &ring->desc[i]; 538 data = &ring->data[i]; 539 540 if (data->m != NULL) { 541 bus_dmamap_sync(ring->data_dmat, data->map, 542 BUS_DMASYNC_POSTWRITE); 543 bus_dmamap_unload(ring->data_dmat, data->map); 544 m_freem(data->m); 545 data->m = NULL; 546 } 547 548 if (data->ni != NULL) { 549 ieee80211_free_node(data->ni); 550 data->ni = NULL; 551 } 552 553 desc->flags = 0; 554 } 555 556 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 557 558 ring->queued = 0; 559 ring->cur = ring->next = ring->stat = 0; 560 } 561 562 static void 563 rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 564 { 565 struct rt2661_tx_data *data; 566 int i; 567 568 if (ring->desc != NULL) { 569 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 570 BUS_DMASYNC_POSTWRITE); 571 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 572 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 573 } 574 575 if (ring->desc_dmat != NULL) 576 bus_dma_tag_destroy(ring->desc_dmat); 577 578 if (ring->data != NULL) { 579 for (i = 0; i < ring->count; i++) { 580 data = &ring->data[i]; 581 582 if (data->m != NULL) { 583 bus_dmamap_sync(ring->data_dmat, data->map, 584 BUS_DMASYNC_POSTWRITE); 585 bus_dmamap_unload(ring->data_dmat, data->map); 586 m_freem(data->m); 587 } 588 589 if (data->ni != NULL) 590 ieee80211_free_node(data->ni); 591 592 if (data->map != NULL) 593 bus_dmamap_destroy(ring->data_dmat, data->map); 594 } 595 596 free(ring->data, M_DEVBUF); 597 } 598 599 if (ring->data_dmat != NULL) 600 bus_dma_tag_destroy(ring->data_dmat); 601 } 602 603 static int 604 rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, 605 int count) 606 { 607 struct rt2661_rx_desc *desc; 608 struct rt2661_rx_data *data; 609 bus_addr_t physaddr; 610 int i, error; 611 612 ring->count = count; 613 ring->cur = ring->next = 0; 614 615 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 616 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 617 count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 618 0, NULL, NULL, &ring->desc_dmat); 619 if (error != 0) { 620 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 621 goto fail; 622 } 623 624 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 625 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 626 if (error != 0) { 627 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 628 goto fail; 629 } 630 631 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 632 count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 633 0); 634 if (error != 0) { 635 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 636 goto fail; 637 } 638 639 ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, 640 M_NOWAIT | M_ZERO); 641 if (ring->data == NULL) { 642 device_printf(sc->sc_dev, "could not allocate soft data\n"); 643 error = ENOMEM; 644 goto fail; 645 } 646 647 /* 648 * Pre-allocate Rx buffers and populate Rx ring. 649 */ 650 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 651 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 652 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 653 if (error != 0) { 654 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 655 goto fail; 656 } 657 658 for (i = 0; i < count; i++) { 659 desc = &sc->rxq.desc[i]; 660 data = &sc->rxq.data[i]; 661 662 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 663 if (error != 0) { 664 device_printf(sc->sc_dev, "could not create DMA map\n"); 665 goto fail; 666 } 667 668 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 669 if (data->m == NULL) { 670 device_printf(sc->sc_dev, 671 "could not allocate rx mbuf\n"); 672 error = ENOMEM; 673 goto fail; 674 } 675 676 error = bus_dmamap_load(ring->data_dmat, data->map, 677 mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, 678 &physaddr, 0); 679 if (error != 0) { 680 device_printf(sc->sc_dev, 681 "could not load rx buf DMA map"); 682 goto fail; 683 } 684 685 desc->flags = htole32(RT2661_RX_BUSY); 686 desc->physaddr = htole32(physaddr); 687 } 688 689 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 690 691 return 0; 692 693 fail: rt2661_free_rx_ring(sc, ring); 694 return error; 695 } 696 697 static void 698 rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 699 { 700 int i; 701 702 for (i = 0; i < ring->count; i++) 703 ring->desc[i].flags = htole32(RT2661_RX_BUSY); 704 705 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 706 707 ring->cur = ring->next = 0; 708 } 709 710 static void 711 rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 712 { 713 struct rt2661_rx_data *data; 714 int i; 715 716 if (ring->desc != NULL) { 717 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 718 BUS_DMASYNC_POSTWRITE); 719 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 720 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 721 } 722 723 if (ring->desc_dmat != NULL) 724 bus_dma_tag_destroy(ring->desc_dmat); 725 726 if (ring->data != NULL) { 727 for (i = 0; i < ring->count; i++) { 728 data = &ring->data[i]; 729 730 if (data->m != NULL) { 731 bus_dmamap_sync(ring->data_dmat, data->map, 732 BUS_DMASYNC_POSTREAD); 733 bus_dmamap_unload(ring->data_dmat, data->map); 734 m_freem(data->m); 735 } 736 737 if (data->map != NULL) 738 bus_dmamap_destroy(ring->data_dmat, data->map); 739 } 740 741 free(ring->data, M_DEVBUF); 742 } 743 744 if (ring->data_dmat != NULL) 745 bus_dma_tag_destroy(ring->data_dmat); 746 } 747 748 static int 749 rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 750 { 751 struct rt2661_vap *rvp = RT2661_VAP(vap); 752 struct ieee80211com *ic = vap->iv_ic; 753 struct rt2661_softc *sc = ic->ic_softc; 754 int error; 755 756 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 757 uint32_t tmp; 758 759 /* abort TSF synchronization */ 760 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 761 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); 762 } 763 764 error = rvp->ral_newstate(vap, nstate, arg); 765 766 if (error == 0 && nstate == IEEE80211_S_RUN) { 767 struct ieee80211_node *ni = vap->iv_bss; 768 769 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 770 rt2661_enable_mrr(sc); 771 rt2661_set_txpreamble(sc); 772 rt2661_set_basicrates(sc, &ni->ni_rates); 773 rt2661_set_bssid(sc, ni->ni_bssid); 774 } 775 776 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 777 vap->iv_opmode == IEEE80211_M_IBSS || 778 vap->iv_opmode == IEEE80211_M_MBSS) { 779 error = rt2661_prepare_beacon(sc, vap); 780 if (error != 0) 781 return error; 782 } 783 if (vap->iv_opmode != IEEE80211_M_MONITOR) 784 rt2661_enable_tsf_sync(sc); 785 else 786 rt2661_enable_tsf(sc); 787 } 788 return error; 789 } 790 791 /* 792 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 793 * 93C66). 794 */ 795 static uint16_t 796 rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) 797 { 798 uint32_t tmp; 799 uint16_t val; 800 int n; 801 802 /* clock C once before the first command */ 803 RT2661_EEPROM_CTL(sc, 0); 804 805 RT2661_EEPROM_CTL(sc, RT2661_S); 806 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 807 RT2661_EEPROM_CTL(sc, RT2661_S); 808 809 /* write start bit (1) */ 810 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 811 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 812 813 /* write READ opcode (10) */ 814 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 815 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 816 RT2661_EEPROM_CTL(sc, RT2661_S); 817 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 818 819 /* write address (A5-A0 or A7-A0) */ 820 n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; 821 for (; n >= 0; n--) { 822 RT2661_EEPROM_CTL(sc, RT2661_S | 823 (((addr >> n) & 1) << RT2661_SHIFT_D)); 824 RT2661_EEPROM_CTL(sc, RT2661_S | 825 (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); 826 } 827 828 RT2661_EEPROM_CTL(sc, RT2661_S); 829 830 /* read data Q15-Q0 */ 831 val = 0; 832 for (n = 15; n >= 0; n--) { 833 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 834 tmp = RAL_READ(sc, RT2661_E2PROM_CSR); 835 val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; 836 RT2661_EEPROM_CTL(sc, RT2661_S); 837 } 838 839 RT2661_EEPROM_CTL(sc, 0); 840 841 /* clear Chip Select and clock C */ 842 RT2661_EEPROM_CTL(sc, RT2661_S); 843 RT2661_EEPROM_CTL(sc, 0); 844 RT2661_EEPROM_CTL(sc, RT2661_C); 845 846 return val; 847 } 848 849 static void 850 rt2661_tx_intr(struct rt2661_softc *sc) 851 { 852 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs; 853 struct rt2661_tx_ring *txq; 854 struct rt2661_tx_data *data; 855 uint32_t val; 856 int error, qid; 857 858 txs->flags = IEEE80211_RATECTL_TX_FAIL_LONG; 859 for (;;) { 860 struct ieee80211_node *ni; 861 struct mbuf *m; 862 863 val = RAL_READ(sc, RT2661_STA_CSR4); 864 if (!(val & RT2661_TX_STAT_VALID)) 865 break; 866 867 /* retrieve the queue in which this frame was sent */ 868 qid = RT2661_TX_QID(val); 869 txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; 870 871 /* retrieve rate control algorithm context */ 872 data = &txq->data[txq->stat]; 873 m = data->m; 874 data->m = NULL; 875 ni = data->ni; 876 data->ni = NULL; 877 878 /* if no frame has been sent, ignore */ 879 if (ni == NULL) 880 continue; 881 882 switch (RT2661_TX_RESULT(val)) { 883 case RT2661_TX_SUCCESS: 884 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 885 txs->long_retries = RT2661_TX_RETRYCNT(val); 886 887 DPRINTFN(sc, 10, "data frame sent successfully after " 888 "%d retries\n", txs->long_retries); 889 if (data->rix != IEEE80211_FIXED_RATE_NONE) 890 ieee80211_ratectl_tx_complete(ni, txs); 891 error = 0; 892 break; 893 894 case RT2661_TX_RETRY_FAIL: 895 txs->status = IEEE80211_RATECTL_TX_FAIL_LONG; 896 txs->long_retries = RT2661_TX_RETRYCNT(val); 897 898 DPRINTFN(sc, 9, "%s\n", 899 "sending data frame failed (too much retries)"); 900 if (data->rix != IEEE80211_FIXED_RATE_NONE) 901 ieee80211_ratectl_tx_complete(ni, txs); 902 error = 1; 903 break; 904 905 default: 906 /* other failure */ 907 device_printf(sc->sc_dev, 908 "sending data frame failed 0x%08x\n", val); 909 error = 1; 910 } 911 912 DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat); 913 914 txq->queued--; 915 if (++txq->stat >= txq->count) /* faster than % count */ 916 txq->stat = 0; 917 918 ieee80211_tx_complete(ni, m, error); 919 } 920 921 sc->sc_tx_timer = 0; 922 923 rt2661_start(sc); 924 } 925 926 static void 927 rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) 928 { 929 struct rt2661_tx_desc *desc; 930 struct rt2661_tx_data *data; 931 932 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD); 933 934 for (;;) { 935 desc = &txq->desc[txq->next]; 936 data = &txq->data[txq->next]; 937 938 if ((le32toh(desc->flags) & RT2661_TX_BUSY) || 939 !(le32toh(desc->flags) & RT2661_TX_VALID)) 940 break; 941 942 bus_dmamap_sync(txq->data_dmat, data->map, 943 BUS_DMASYNC_POSTWRITE); 944 bus_dmamap_unload(txq->data_dmat, data->map); 945 946 /* descriptor is no longer valid */ 947 desc->flags &= ~htole32(RT2661_TX_VALID); 948 949 DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next); 950 951 if (++txq->next >= txq->count) /* faster than % count */ 952 txq->next = 0; 953 } 954 955 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 956 } 957 958 static void 959 rt2661_rx_intr(struct rt2661_softc *sc) 960 { 961 struct ieee80211com *ic = &sc->sc_ic; 962 struct rt2661_rx_desc *desc; 963 struct rt2661_rx_data *data; 964 bus_addr_t physaddr; 965 struct ieee80211_frame *wh; 966 struct ieee80211_node *ni; 967 struct mbuf *mnew, *m; 968 int error; 969 970 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 971 BUS_DMASYNC_POSTREAD); 972 973 for (;;) { 974 int8_t rssi, nf; 975 976 desc = &sc->rxq.desc[sc->rxq.cur]; 977 data = &sc->rxq.data[sc->rxq.cur]; 978 979 if (le32toh(desc->flags) & RT2661_RX_BUSY) 980 break; 981 982 if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || 983 (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { 984 /* 985 * This should not happen since we did not request 986 * to receive those frames when we filled TXRX_CSR0. 987 */ 988 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 989 le32toh(desc->flags)); 990 counter_u64_add(ic->ic_ierrors, 1); 991 goto skip; 992 } 993 994 if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { 995 counter_u64_add(ic->ic_ierrors, 1); 996 goto skip; 997 } 998 999 /* 1000 * Try to allocate a new mbuf for this ring element and load it 1001 * before processing the current mbuf. If the ring element 1002 * cannot be loaded, drop the received packet and reuse the old 1003 * mbuf. In the unlikely case that the old mbuf can't be 1004 * reloaded either, explicitly panic. 1005 */ 1006 mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1007 if (mnew == NULL) { 1008 counter_u64_add(ic->ic_ierrors, 1); 1009 goto skip; 1010 } 1011 1012 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1013 BUS_DMASYNC_POSTREAD); 1014 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1015 1016 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1017 mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr, 1018 &physaddr, 0); 1019 if (error != 0) { 1020 m_freem(mnew); 1021 1022 /* try to reload the old mbuf */ 1023 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1024 mtod(data->m, void *), MCLBYTES, 1025 rt2661_dma_map_addr, &physaddr, 0); 1026 if (error != 0) { 1027 /* very unlikely that it will fail... */ 1028 panic("%s: could not load old rx mbuf", 1029 device_get_name(sc->sc_dev)); 1030 } 1031 counter_u64_add(ic->ic_ierrors, 1); 1032 goto skip; 1033 } 1034 1035 /* 1036 * New mbuf successfully loaded, update Rx ring and continue 1037 * processing. 1038 */ 1039 m = data->m; 1040 data->m = mnew; 1041 desc->physaddr = htole32(physaddr); 1042 1043 /* finalize mbuf */ 1044 m->m_pkthdr.len = m->m_len = 1045 (le32toh(desc->flags) >> 16) & 0xfff; 1046 1047 rssi = rt2661_get_rssi(sc, desc->rssi); 1048 /* Error happened during RSSI conversion. */ 1049 if (rssi < 0) 1050 rssi = -30; /* XXX ignored by net80211 */ 1051 nf = RT2661_NOISE_FLOOR; 1052 1053 if (ieee80211_radiotap_active(ic)) { 1054 struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; 1055 uint32_t tsf_lo, tsf_hi; 1056 1057 /* get timestamp (low and high 32 bits) */ 1058 tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); 1059 tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); 1060 1061 tap->wr_tsf = 1062 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1063 tap->wr_flags = 0; 1064 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1065 (desc->flags & htole32(RT2661_RX_OFDM)) ? 1066 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1067 tap->wr_antsignal = nf + rssi; 1068 tap->wr_antnoise = nf; 1069 } 1070 sc->sc_flags |= RAL_INPUT_RUNNING; 1071 RAL_UNLOCK(sc); 1072 wh = mtod(m, struct ieee80211_frame *); 1073 1074 /* send the frame to the 802.11 layer */ 1075 ni = ieee80211_find_rxnode(ic, 1076 (struct ieee80211_frame_min *)wh); 1077 if (ni != NULL) { 1078 (void) ieee80211_input(ni, m, rssi, nf); 1079 ieee80211_free_node(ni); 1080 } else 1081 (void) ieee80211_input_all(ic, m, rssi, nf); 1082 1083 RAL_LOCK(sc); 1084 sc->sc_flags &= ~RAL_INPUT_RUNNING; 1085 1086 skip: desc->flags |= htole32(RT2661_RX_BUSY); 1087 1088 DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur); 1089 1090 sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; 1091 } 1092 1093 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1094 BUS_DMASYNC_PREWRITE); 1095 } 1096 1097 /* ARGSUSED */ 1098 static void 1099 rt2661_mcu_beacon_expire(struct rt2661_softc *sc) 1100 { 1101 /* do nothing */ 1102 } 1103 1104 static void 1105 rt2661_mcu_wakeup(struct rt2661_softc *sc) 1106 { 1107 RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); 1108 1109 RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); 1110 RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); 1111 RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); 1112 1113 /* send wakeup command to MCU */ 1114 rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); 1115 } 1116 1117 static void 1118 rt2661_mcu_cmd_intr(struct rt2661_softc *sc) 1119 { 1120 RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); 1121 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 1122 } 1123 1124 void 1125 rt2661_intr(void *arg) 1126 { 1127 struct rt2661_softc *sc = arg; 1128 uint32_t r1, r2; 1129 1130 RAL_LOCK(sc); 1131 1132 /* disable MAC and MCU interrupts */ 1133 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 1134 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 1135 1136 /* don't re-enable interrupts if we're shutting down */ 1137 if (!(sc->sc_flags & RAL_RUNNING)) { 1138 RAL_UNLOCK(sc); 1139 return; 1140 } 1141 1142 r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); 1143 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); 1144 1145 r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); 1146 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); 1147 1148 if (r1 & RT2661_MGT_DONE) 1149 rt2661_tx_dma_intr(sc, &sc->mgtq); 1150 1151 if (r1 & RT2661_RX_DONE) 1152 rt2661_rx_intr(sc); 1153 1154 if (r1 & RT2661_TX0_DMA_DONE) 1155 rt2661_tx_dma_intr(sc, &sc->txq[0]); 1156 1157 if (r1 & RT2661_TX1_DMA_DONE) 1158 rt2661_tx_dma_intr(sc, &sc->txq[1]); 1159 1160 if (r1 & RT2661_TX2_DMA_DONE) 1161 rt2661_tx_dma_intr(sc, &sc->txq[2]); 1162 1163 if (r1 & RT2661_TX3_DMA_DONE) 1164 rt2661_tx_dma_intr(sc, &sc->txq[3]); 1165 1166 if (r1 & RT2661_TX_DONE) 1167 rt2661_tx_intr(sc); 1168 1169 if (r2 & RT2661_MCU_CMD_DONE) 1170 rt2661_mcu_cmd_intr(sc); 1171 1172 if (r2 & RT2661_MCU_BEACON_EXPIRE) 1173 rt2661_mcu_beacon_expire(sc); 1174 1175 if (r2 & RT2661_MCU_WAKEUP) 1176 rt2661_mcu_wakeup(sc); 1177 1178 /* re-enable MAC and MCU interrupts */ 1179 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 1180 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 1181 1182 RAL_UNLOCK(sc); 1183 } 1184 1185 static uint8_t 1186 rt2661_plcp_signal(int rate) 1187 { 1188 switch (rate) { 1189 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1190 case 12: return 0xb; 1191 case 18: return 0xf; 1192 case 24: return 0xa; 1193 case 36: return 0xe; 1194 case 48: return 0x9; 1195 case 72: return 0xd; 1196 case 96: return 0x8; 1197 case 108: return 0xc; 1198 1199 /* CCK rates (NB: not IEEE std, device-specific) */ 1200 case 2: return 0x0; 1201 case 4: return 0x1; 1202 case 11: return 0x2; 1203 case 22: return 0x3; 1204 } 1205 return 0xff; /* XXX unsupported/unknown rate */ 1206 } 1207 1208 static void 1209 rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, 1210 uint32_t flags, uint16_t xflags, int len, int rate, 1211 const bus_dma_segment_t *segs, int nsegs, int ac) 1212 { 1213 struct ieee80211com *ic = &sc->sc_ic; 1214 uint16_t plcp_length; 1215 int i, remainder; 1216 1217 desc->flags = htole32(flags); 1218 desc->flags |= htole32(len << 16); 1219 desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); 1220 1221 desc->xflags = htole16(xflags); 1222 desc->xflags |= htole16(nsegs << 13); 1223 1224 desc->wme = htole16( 1225 RT2661_QID(ac) | 1226 RT2661_AIFSN(2) | 1227 RT2661_LOGCWMIN(4) | 1228 RT2661_LOGCWMAX(10)); 1229 1230 /* 1231 * Remember in which queue this frame was sent. This field is driver 1232 * private data only. It will be made available by the NIC in STA_CSR4 1233 * on Tx interrupts. 1234 */ 1235 desc->qid = ac; 1236 1237 /* setup PLCP fields */ 1238 desc->plcp_signal = rt2661_plcp_signal(rate); 1239 desc->plcp_service = 4; 1240 1241 len += IEEE80211_CRC_LEN; 1242 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { 1243 desc->flags |= htole32(RT2661_TX_OFDM); 1244 1245 plcp_length = len & 0xfff; 1246 desc->plcp_length_hi = plcp_length >> 6; 1247 desc->plcp_length_lo = plcp_length & 0x3f; 1248 } else { 1249 plcp_length = howmany(16 * len, rate); 1250 if (rate == 22) { 1251 remainder = (16 * len) % 22; 1252 if (remainder != 0 && remainder < 7) 1253 desc->plcp_service |= RT2661_PLCP_LENGEXT; 1254 } 1255 desc->plcp_length_hi = plcp_length >> 8; 1256 desc->plcp_length_lo = plcp_length & 0xff; 1257 1258 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1259 desc->plcp_signal |= 0x08; 1260 } 1261 1262 /* RT2x61 supports scatter with up to 5 segments */ 1263 for (i = 0; i < nsegs; i++) { 1264 desc->addr[i] = htole32(segs[i].ds_addr); 1265 desc->len [i] = htole16(segs[i].ds_len); 1266 } 1267 } 1268 1269 static int 1270 rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, 1271 struct ieee80211_node *ni) 1272 { 1273 struct ieee80211vap *vap = ni->ni_vap; 1274 struct ieee80211com *ic = ni->ni_ic; 1275 struct rt2661_tx_desc *desc; 1276 struct rt2661_tx_data *data; 1277 struct ieee80211_frame *wh; 1278 struct ieee80211_key *k; 1279 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1280 uint16_t dur; 1281 uint32_t flags = 0; /* XXX HWSEQ */ 1282 int nsegs, rate, error; 1283 1284 desc = &sc->mgtq.desc[sc->mgtq.cur]; 1285 data = &sc->mgtq.data[sc->mgtq.cur]; 1286 1287 rate = ni->ni_txparms->mgmtrate; 1288 1289 wh = mtod(m0, struct ieee80211_frame *); 1290 1291 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1292 k = ieee80211_crypto_encap(ni, m0); 1293 if (k == NULL) { 1294 m_freem(m0); 1295 return ENOBUFS; 1296 } 1297 } 1298 1299 error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0, 1300 segs, &nsegs, 0); 1301 if (error != 0) { 1302 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1303 error); 1304 m_freem(m0); 1305 return error; 1306 } 1307 1308 if (ieee80211_radiotap_active_vap(vap)) { 1309 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1310 1311 tap->wt_flags = 0; 1312 tap->wt_rate = rate; 1313 1314 ieee80211_radiotap_tx(vap, m0); 1315 } 1316 1317 data->m = m0; 1318 data->ni = ni; 1319 /* management frames are not taken into account for amrr */ 1320 data->rix = IEEE80211_FIXED_RATE_NONE; 1321 1322 wh = mtod(m0, struct ieee80211_frame *); 1323 1324 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1325 flags |= RT2661_TX_NEED_ACK; 1326 1327 dur = ieee80211_ack_duration(ic->ic_rt, 1328 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1329 *(uint16_t *)wh->i_dur = htole16(dur); 1330 1331 /* tell hardware to add timestamp in probe responses */ 1332 if ((wh->i_fc[0] & 1333 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1334 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1335 flags |= RT2661_TX_TIMESTAMP; 1336 } 1337 1338 rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, 1339 m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT); 1340 1341 bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1342 bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map, 1343 BUS_DMASYNC_PREWRITE); 1344 1345 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1346 m0->m_pkthdr.len, sc->mgtq.cur, rate); 1347 1348 /* kick mgt */ 1349 sc->mgtq.queued++; 1350 sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; 1351 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); 1352 1353 return 0; 1354 } 1355 1356 static int 1357 rt2661_sendprot(struct rt2661_softc *sc, int ac, 1358 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1359 { 1360 struct ieee80211com *ic = ni->ni_ic; 1361 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1362 struct rt2661_tx_desc *desc; 1363 struct rt2661_tx_data *data; 1364 struct mbuf *mprot; 1365 int protrate, flags, error; 1366 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1367 int nsegs; 1368 1369 mprot = ieee80211_alloc_prot(ni, m, rate, prot); 1370 if (mprot == NULL) { 1371 if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); 1372 device_printf(sc->sc_dev, 1373 "could not allocate mbuf for protection mode %d\n", prot); 1374 return ENOBUFS; 1375 } 1376 1377 data = &txq->data[txq->cur]; 1378 desc = &txq->desc[txq->cur]; 1379 1380 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs, 1381 &nsegs, 0); 1382 if (error != 0) { 1383 device_printf(sc->sc_dev, 1384 "could not map mbuf (error %d)\n", error); 1385 m_freem(mprot); 1386 return error; 1387 } 1388 1389 data->m = mprot; 1390 data->ni = ieee80211_ref_node(ni); 1391 /* ctl frames are not taken into account for amrr */ 1392 data->rix = IEEE80211_FIXED_RATE_NONE; 1393 1394 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 1395 flags = RT2661_TX_MORE_FRAG; 1396 if (prot == IEEE80211_PROT_RTSCTS) 1397 flags |= RT2661_TX_NEED_ACK; 1398 1399 rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len, 1400 protrate, segs, 1, ac); 1401 1402 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1403 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1404 1405 txq->queued++; 1406 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1407 1408 return 0; 1409 } 1410 1411 static int 1412 rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, 1413 struct ieee80211_node *ni, int ac) 1414 { 1415 struct ieee80211vap *vap = ni->ni_vap; 1416 struct ieee80211com *ic = &sc->sc_ic; 1417 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1418 struct rt2661_tx_desc *desc; 1419 struct rt2661_tx_data *data; 1420 struct ieee80211_frame *wh; 1421 const struct ieee80211_txparam *tp = ni->ni_txparms; 1422 struct ieee80211_key *k; 1423 struct mbuf *mnew; 1424 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1425 uint16_t dur; 1426 uint32_t flags; 1427 int error, nsegs, rate, noack = 0; 1428 1429 wh = mtod(m0, struct ieee80211_frame *); 1430 1431 if (m0->m_flags & M_EAPOL) { 1432 rate = tp->mgmtrate; 1433 } else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1434 rate = tp->mcastrate; 1435 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1436 rate = tp->ucastrate; 1437 } else { 1438 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1439 rate = ni->ni_txrate; 1440 } 1441 rate &= IEEE80211_RATE_VAL; 1442 1443 if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) 1444 noack = !! ieee80211_wme_vap_ac_is_noack(vap, ac); 1445 1446 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1447 k = ieee80211_crypto_encap(ni, m0); 1448 if (k == NULL) { 1449 m_freem(m0); 1450 return ENOBUFS; 1451 } 1452 1453 /* packet header may have moved, reset our local pointer */ 1454 wh = mtod(m0, struct ieee80211_frame *); 1455 } 1456 1457 flags = 0; 1458 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1459 int prot = IEEE80211_PROT_NONE; 1460 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1461 prot = IEEE80211_PROT_RTSCTS; 1462 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1463 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) 1464 prot = ic->ic_protmode; 1465 if (prot != IEEE80211_PROT_NONE) { 1466 error = rt2661_sendprot(sc, ac, m0, ni, prot, rate); 1467 if (error) { 1468 m_freem(m0); 1469 return error; 1470 } 1471 flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS; 1472 } 1473 } 1474 1475 data = &txq->data[txq->cur]; 1476 desc = &txq->desc[txq->cur]; 1477 1478 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, 1479 &nsegs, 0); 1480 if (error != 0 && error != EFBIG) { 1481 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1482 error); 1483 m_freem(m0); 1484 return error; 1485 } 1486 if (error != 0) { 1487 mnew = m_defrag(m0, M_NOWAIT); 1488 if (mnew == NULL) { 1489 device_printf(sc->sc_dev, 1490 "could not defragment mbuf\n"); 1491 m_freem(m0); 1492 return ENOBUFS; 1493 } 1494 m0 = mnew; 1495 1496 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, 1497 segs, &nsegs, 0); 1498 if (error != 0) { 1499 device_printf(sc->sc_dev, 1500 "could not map mbuf (error %d)\n", error); 1501 m_freem(m0); 1502 return error; 1503 } 1504 1505 /* packet header have moved, reset our local pointer */ 1506 wh = mtod(m0, struct ieee80211_frame *); 1507 } 1508 1509 if (ieee80211_radiotap_active_vap(vap)) { 1510 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1511 1512 tap->wt_flags = 0; 1513 tap->wt_rate = rate; 1514 1515 ieee80211_radiotap_tx(vap, m0); 1516 } 1517 1518 data->m = m0; 1519 data->ni = ni; 1520 1521 /* remember link conditions for rate adaptation algorithm */ 1522 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1523 data->rix = ni->ni_txrate; 1524 /* XXX probably need last rssi value and not avg */ 1525 data->rssi = ic->ic_node_getrssi(ni); 1526 } else 1527 data->rix = IEEE80211_FIXED_RATE_NONE; 1528 1529 if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1530 flags |= RT2661_TX_NEED_ACK; 1531 1532 dur = ieee80211_ack_duration(ic->ic_rt, 1533 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1534 *(uint16_t *)wh->i_dur = htole16(dur); 1535 } 1536 1537 rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs, 1538 nsegs, ac); 1539 1540 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1541 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1542 1543 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1544 m0->m_pkthdr.len, txq->cur, rate); 1545 1546 /* kick Tx */ 1547 txq->queued++; 1548 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1549 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac); 1550 1551 return 0; 1552 } 1553 1554 static int 1555 rt2661_transmit(struct ieee80211com *ic, struct mbuf *m) 1556 { 1557 struct rt2661_softc *sc = ic->ic_softc; 1558 int error; 1559 1560 RAL_LOCK(sc); 1561 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1562 RAL_UNLOCK(sc); 1563 return (ENXIO); 1564 } 1565 error = mbufq_enqueue(&sc->sc_snd, m); 1566 if (error) { 1567 RAL_UNLOCK(sc); 1568 return (error); 1569 } 1570 rt2661_start(sc); 1571 RAL_UNLOCK(sc); 1572 1573 return (0); 1574 } 1575 1576 static void 1577 rt2661_start(struct rt2661_softc *sc) 1578 { 1579 struct mbuf *m; 1580 struct ieee80211_node *ni; 1581 int ac; 1582 1583 RAL_LOCK_ASSERT(sc); 1584 1585 /* prevent management frames from being sent if we're not ready */ 1586 if (!(sc->sc_flags & RAL_RUNNING) || sc->sc_invalid) 1587 return; 1588 1589 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 1590 ac = M_WME_GETAC(m); 1591 if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) { 1592 /* there is no place left in this ring */ 1593 mbufq_prepend(&sc->sc_snd, m); 1594 break; 1595 } 1596 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1597 if (rt2661_tx_data(sc, m, ni, ac) != 0) { 1598 if_inc_counter(ni->ni_vap->iv_ifp, 1599 IFCOUNTER_OERRORS, 1); 1600 ieee80211_free_node(ni); 1601 break; 1602 } 1603 sc->sc_tx_timer = 5; 1604 } 1605 } 1606 1607 static int 1608 rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 1609 const struct ieee80211_bpf_params *params) 1610 { 1611 struct ieee80211com *ic = ni->ni_ic; 1612 struct rt2661_softc *sc = ic->ic_softc; 1613 1614 RAL_LOCK(sc); 1615 1616 /* prevent management frames from being sent if we're not ready */ 1617 if (!(sc->sc_flags & RAL_RUNNING)) { 1618 RAL_UNLOCK(sc); 1619 m_freem(m); 1620 return ENETDOWN; 1621 } 1622 if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { 1623 RAL_UNLOCK(sc); 1624 m_freem(m); 1625 return ENOBUFS; /* XXX */ 1626 } 1627 1628 /* 1629 * Legacy path; interpret frame contents to decide 1630 * precisely how to send the frame. 1631 * XXX raw path 1632 */ 1633 if (rt2661_tx_mgt(sc, m, ni) != 0) 1634 goto bad; 1635 sc->sc_tx_timer = 5; 1636 1637 RAL_UNLOCK(sc); 1638 1639 return 0; 1640 bad: 1641 RAL_UNLOCK(sc); 1642 return EIO; /* XXX */ 1643 } 1644 1645 static void 1646 rt2661_watchdog(void *arg) 1647 { 1648 struct rt2661_softc *sc = (struct rt2661_softc *)arg; 1649 1650 RAL_LOCK_ASSERT(sc); 1651 1652 KASSERT(sc->sc_flags & RAL_RUNNING, ("not running")); 1653 1654 if (sc->sc_invalid) /* card ejected */ 1655 return; 1656 1657 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1658 device_printf(sc->sc_dev, "device timeout\n"); 1659 rt2661_init_locked(sc); 1660 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 1661 /* NB: callout is reset in rt2661_init() */ 1662 return; 1663 } 1664 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 1665 } 1666 1667 static void 1668 rt2661_parent(struct ieee80211com *ic) 1669 { 1670 struct rt2661_softc *sc = ic->ic_softc; 1671 int startall = 0; 1672 1673 RAL_LOCK(sc); 1674 if (ic->ic_nrunning > 0) { 1675 if ((sc->sc_flags & RAL_RUNNING) == 0) { 1676 rt2661_init_locked(sc); 1677 startall = 1; 1678 } else 1679 rt2661_update_promisc(ic); 1680 } else if (sc->sc_flags & RAL_RUNNING) 1681 rt2661_stop_locked(sc); 1682 RAL_UNLOCK(sc); 1683 if (startall) 1684 ieee80211_start_all(ic); 1685 } 1686 1687 static void 1688 rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) 1689 { 1690 uint32_t tmp; 1691 int ntries; 1692 1693 for (ntries = 0; ntries < 100; ntries++) { 1694 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1695 break; 1696 DELAY(1); 1697 } 1698 if (ntries == 100) { 1699 device_printf(sc->sc_dev, "could not write to BBP\n"); 1700 return; 1701 } 1702 1703 tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; 1704 RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); 1705 1706 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1707 } 1708 1709 static uint8_t 1710 rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) 1711 { 1712 uint32_t val; 1713 int ntries; 1714 1715 for (ntries = 0; ntries < 100; ntries++) { 1716 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1717 break; 1718 DELAY(1); 1719 } 1720 if (ntries == 100) { 1721 device_printf(sc->sc_dev, "could not read from BBP\n"); 1722 return 0; 1723 } 1724 1725 val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; 1726 RAL_WRITE(sc, RT2661_PHY_CSR3, val); 1727 1728 for (ntries = 0; ntries < 100; ntries++) { 1729 val = RAL_READ(sc, RT2661_PHY_CSR3); 1730 if (!(val & RT2661_BBP_BUSY)) 1731 return val & 0xff; 1732 DELAY(1); 1733 } 1734 1735 device_printf(sc->sc_dev, "could not read from BBP\n"); 1736 return 0; 1737 } 1738 1739 static void 1740 rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) 1741 { 1742 uint32_t tmp; 1743 int ntries; 1744 1745 for (ntries = 0; ntries < 100; ntries++) { 1746 if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) 1747 break; 1748 DELAY(1); 1749 } 1750 if (ntries == 100) { 1751 device_printf(sc->sc_dev, "could not write to RF\n"); 1752 return; 1753 } 1754 1755 tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | 1756 (reg & 3); 1757 RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); 1758 1759 /* remember last written value in sc */ 1760 sc->rf_regs[reg] = val; 1761 1762 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff); 1763 } 1764 1765 static int 1766 rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) 1767 { 1768 if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) 1769 return EIO; /* there is already a command pending */ 1770 1771 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 1772 RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); 1773 1774 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); 1775 1776 return 0; 1777 } 1778 1779 static void 1780 rt2661_select_antenna(struct rt2661_softc *sc) 1781 { 1782 uint8_t bbp4, bbp77; 1783 uint32_t tmp; 1784 1785 bbp4 = rt2661_bbp_read(sc, 4); 1786 bbp77 = rt2661_bbp_read(sc, 77); 1787 1788 /* TBD */ 1789 1790 /* make sure Rx is disabled before switching antenna */ 1791 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 1792 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 1793 1794 rt2661_bbp_write(sc, 4, bbp4); 1795 rt2661_bbp_write(sc, 77, bbp77); 1796 1797 /* restore Rx filter */ 1798 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 1799 } 1800 1801 /* 1802 * Enable multi-rate retries for frames sent at OFDM rates. 1803 * In 802.11b/g mode, allow fallback to CCK rates. 1804 */ 1805 static void 1806 rt2661_enable_mrr(struct rt2661_softc *sc) 1807 { 1808 struct ieee80211com *ic = &sc->sc_ic; 1809 uint32_t tmp; 1810 1811 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1812 1813 tmp &= ~RT2661_MRR_CCK_FALLBACK; 1814 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) 1815 tmp |= RT2661_MRR_CCK_FALLBACK; 1816 tmp |= RT2661_MRR_ENABLED; 1817 1818 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1819 } 1820 1821 static void 1822 rt2661_set_txpreamble(struct rt2661_softc *sc) 1823 { 1824 struct ieee80211com *ic = &sc->sc_ic; 1825 uint32_t tmp; 1826 1827 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1828 1829 tmp &= ~RT2661_SHORT_PREAMBLE; 1830 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1831 tmp |= RT2661_SHORT_PREAMBLE; 1832 1833 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1834 } 1835 1836 static void 1837 rt2661_set_basicrates(struct rt2661_softc *sc, 1838 const struct ieee80211_rateset *rs) 1839 { 1840 struct ieee80211com *ic = &sc->sc_ic; 1841 uint32_t mask = 0; 1842 uint8_t rate; 1843 int i; 1844 1845 for (i = 0; i < rs->rs_nrates; i++) { 1846 rate = rs->rs_rates[i]; 1847 1848 if (!(rate & IEEE80211_RATE_BASIC)) 1849 continue; 1850 1851 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, 1852 IEEE80211_RV(rate)); 1853 } 1854 1855 RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); 1856 1857 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 1858 } 1859 1860 /* 1861 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference 1862 * driver. 1863 */ 1864 static void 1865 rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) 1866 { 1867 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; 1868 uint32_t tmp; 1869 1870 /* update all BBP registers that depend on the band */ 1871 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; 1872 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; 1873 if (IEEE80211_IS_CHAN_5GHZ(c)) { 1874 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; 1875 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; 1876 } 1877 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1878 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1879 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; 1880 } 1881 1882 rt2661_bbp_write(sc, 17, bbp17); 1883 rt2661_bbp_write(sc, 96, bbp96); 1884 rt2661_bbp_write(sc, 104, bbp104); 1885 1886 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 1887 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 1888 rt2661_bbp_write(sc, 75, 0x80); 1889 rt2661_bbp_write(sc, 86, 0x80); 1890 rt2661_bbp_write(sc, 88, 0x80); 1891 } 1892 1893 rt2661_bbp_write(sc, 35, bbp35); 1894 rt2661_bbp_write(sc, 97, bbp97); 1895 rt2661_bbp_write(sc, 98, bbp98); 1896 1897 tmp = RAL_READ(sc, RT2661_PHY_CSR0); 1898 tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); 1899 if (IEEE80211_IS_CHAN_2GHZ(c)) 1900 tmp |= RT2661_PA_PE_2GHZ; 1901 else 1902 tmp |= RT2661_PA_PE_5GHZ; 1903 RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); 1904 } 1905 1906 static void 1907 rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) 1908 { 1909 struct ieee80211com *ic = &sc->sc_ic; 1910 const struct rfprog *rfprog; 1911 uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; 1912 int8_t power; 1913 u_int i, chan; 1914 1915 chan = ieee80211_chan2ieee(ic, c); 1916 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 1917 1918 /* select the appropriate RF settings based on what EEPROM says */ 1919 rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; 1920 1921 /* find the settings for this channel (we know it exists) */ 1922 for (i = 0; rfprog[i].chan != chan; i++); 1923 1924 power = sc->txpow[i]; 1925 if (power < 0) { 1926 bbp94 += power; 1927 power = 0; 1928 } else if (power > 31) { 1929 bbp94 += power - 31; 1930 power = 31; 1931 } 1932 1933 /* 1934 * If we are switching from the 2GHz band to the 5GHz band or 1935 * vice-versa, BBP registers need to be reprogrammed. 1936 */ 1937 if (c->ic_flags != sc->sc_curchan->ic_flags) { 1938 rt2661_select_band(sc, c); 1939 rt2661_select_antenna(sc); 1940 } 1941 sc->sc_curchan = c; 1942 1943 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1944 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1945 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 1946 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1947 1948 DELAY(200); 1949 1950 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1951 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1952 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); 1953 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1954 1955 DELAY(200); 1956 1957 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 1958 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 1959 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 1960 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 1961 1962 /* enable smart mode for MIMO-capable RFs */ 1963 bbp3 = rt2661_bbp_read(sc, 3); 1964 1965 bbp3 &= ~RT2661_SMART_MODE; 1966 if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) 1967 bbp3 |= RT2661_SMART_MODE; 1968 1969 rt2661_bbp_write(sc, 3, bbp3); 1970 1971 if (bbp94 != RT2661_BBPR94_DEFAULT) 1972 rt2661_bbp_write(sc, 94, bbp94); 1973 1974 /* 5GHz radio needs a 1ms delay here */ 1975 if (IEEE80211_IS_CHAN_5GHZ(c)) 1976 DELAY(1000); 1977 } 1978 1979 static void 1980 rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) 1981 { 1982 uint32_t tmp; 1983 1984 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 1985 RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); 1986 1987 tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; 1988 RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); 1989 } 1990 1991 static void 1992 rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) 1993 { 1994 uint32_t tmp; 1995 1996 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 1997 RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); 1998 1999 tmp = addr[4] | addr[5] << 8; 2000 RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); 2001 } 2002 2003 static void 2004 rt2661_update_promisc(struct ieee80211com *ic) 2005 { 2006 struct rt2661_softc *sc = ic->ic_softc; 2007 uint32_t tmp; 2008 2009 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2010 2011 tmp &= ~RT2661_DROP_NOT_TO_ME; 2012 if (ic->ic_promisc == 0) 2013 tmp |= RT2661_DROP_NOT_TO_ME; 2014 2015 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2016 2017 DPRINTF(sc, "%s promiscuous mode\n", 2018 (ic->ic_promisc > 0) ? "entering" : "leaving"); 2019 } 2020 2021 /* 2022 * Update QoS (802.11e) settings for each h/w Tx ring. 2023 */ 2024 static int 2025 rt2661_wme_update(struct ieee80211com *ic) 2026 { 2027 struct rt2661_softc *sc = ic->ic_softc; 2028 struct chanAccParams chp; 2029 const struct wmeParams *wmep; 2030 2031 ieee80211_wme_ic_getparams(ic, &chp); 2032 2033 wmep = chp.cap_wmeParams; 2034 2035 /* XXX: not sure about shifts. */ 2036 /* XXX: the reference driver plays with AC_VI settings too. */ 2037 2038 /* update TxOp */ 2039 RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, 2040 wmep[WME_AC_BE].wmep_txopLimit << 16 | 2041 wmep[WME_AC_BK].wmep_txopLimit); 2042 RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, 2043 wmep[WME_AC_VI].wmep_txopLimit << 16 | 2044 wmep[WME_AC_VO].wmep_txopLimit); 2045 2046 /* update CWmin */ 2047 RAL_WRITE(sc, RT2661_CWMIN_CSR, 2048 wmep[WME_AC_BE].wmep_logcwmin << 12 | 2049 wmep[WME_AC_BK].wmep_logcwmin << 8 | 2050 wmep[WME_AC_VI].wmep_logcwmin << 4 | 2051 wmep[WME_AC_VO].wmep_logcwmin); 2052 2053 /* update CWmax */ 2054 RAL_WRITE(sc, RT2661_CWMAX_CSR, 2055 wmep[WME_AC_BE].wmep_logcwmax << 12 | 2056 wmep[WME_AC_BK].wmep_logcwmax << 8 | 2057 wmep[WME_AC_VI].wmep_logcwmax << 4 | 2058 wmep[WME_AC_VO].wmep_logcwmax); 2059 2060 /* update Aifsn */ 2061 RAL_WRITE(sc, RT2661_AIFSN_CSR, 2062 wmep[WME_AC_BE].wmep_aifsn << 12 | 2063 wmep[WME_AC_BK].wmep_aifsn << 8 | 2064 wmep[WME_AC_VI].wmep_aifsn << 4 | 2065 wmep[WME_AC_VO].wmep_aifsn); 2066 2067 return 0; 2068 } 2069 2070 static void 2071 rt2661_update_slot(struct ieee80211com *ic) 2072 { 2073 struct rt2661_softc *sc = ic->ic_softc; 2074 uint8_t slottime; 2075 uint32_t tmp; 2076 2077 slottime = IEEE80211_GET_SLOTTIME(ic); 2078 2079 tmp = RAL_READ(sc, RT2661_MAC_CSR9); 2080 tmp = (tmp & ~0xff) | slottime; 2081 RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); 2082 } 2083 2084 static const char * 2085 rt2661_get_rf(int rev) 2086 { 2087 switch (rev) { 2088 case RT2661_RF_5225: return "RT5225"; 2089 case RT2661_RF_5325: return "RT5325 (MIMO XR)"; 2090 case RT2661_RF_2527: return "RT2527"; 2091 case RT2661_RF_2529: return "RT2529 (MIMO XR)"; 2092 default: return "unknown"; 2093 } 2094 } 2095 2096 static void 2097 rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2098 { 2099 uint16_t val; 2100 int i; 2101 2102 /* read MAC address */ 2103 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); 2104 macaddr[0] = val & 0xff; 2105 macaddr[1] = val >> 8; 2106 2107 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); 2108 macaddr[2] = val & 0xff; 2109 macaddr[3] = val >> 8; 2110 2111 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); 2112 macaddr[4] = val & 0xff; 2113 macaddr[5] = val >> 8; 2114 2115 val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); 2116 /* XXX: test if different from 0xffff? */ 2117 sc->rf_rev = (val >> 11) & 0x1f; 2118 sc->hw_radio = (val >> 10) & 0x1; 2119 sc->rx_ant = (val >> 4) & 0x3; 2120 sc->tx_ant = (val >> 2) & 0x3; 2121 sc->nb_ant = val & 0x3; 2122 2123 DPRINTF(sc, "RF revision=%d\n", sc->rf_rev); 2124 2125 val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); 2126 sc->ext_5ghz_lna = (val >> 6) & 0x1; 2127 sc->ext_2ghz_lna = (val >> 4) & 0x1; 2128 2129 DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", 2130 sc->ext_2ghz_lna, sc->ext_5ghz_lna); 2131 2132 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); 2133 if ((val & 0xff) != 0xff) 2134 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ 2135 2136 /* Only [-10, 10] is valid */ 2137 if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10) 2138 sc->rssi_2ghz_corr = 0; 2139 2140 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); 2141 if ((val & 0xff) != 0xff) 2142 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ 2143 2144 /* Only [-10, 10] is valid */ 2145 if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10) 2146 sc->rssi_5ghz_corr = 0; 2147 2148 /* adjust RSSI correction for external low-noise amplifier */ 2149 if (sc->ext_2ghz_lna) 2150 sc->rssi_2ghz_corr -= 14; 2151 if (sc->ext_5ghz_lna) 2152 sc->rssi_5ghz_corr -= 14; 2153 2154 DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", 2155 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); 2156 2157 val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); 2158 if ((val >> 8) != 0xff) 2159 sc->rfprog = (val >> 8) & 0x3; 2160 if ((val & 0xff) != 0xff) 2161 sc->rffreq = val & 0xff; 2162 2163 DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq); 2164 2165 /* read Tx power for all a/b/g channels */ 2166 for (i = 0; i < 19; i++) { 2167 val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); 2168 sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ 2169 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2170 rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]); 2171 sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ 2172 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2173 rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]); 2174 } 2175 2176 /* read vendor-specific BBP values */ 2177 for (i = 0; i < 16; i++) { 2178 val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); 2179 if (val == 0 || val == 0xffff) 2180 continue; /* skip invalid entries */ 2181 sc->bbp_prom[i].reg = val >> 8; 2182 sc->bbp_prom[i].val = val & 0xff; 2183 DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg, 2184 sc->bbp_prom[i].val); 2185 } 2186 } 2187 2188 static int 2189 rt2661_bbp_init(struct rt2661_softc *sc) 2190 { 2191 int i, ntries; 2192 uint8_t val; 2193 2194 /* wait for BBP to be ready */ 2195 for (ntries = 0; ntries < 100; ntries++) { 2196 val = rt2661_bbp_read(sc, 0); 2197 if (val != 0 && val != 0xff) 2198 break; 2199 DELAY(100); 2200 } 2201 if (ntries == 100) { 2202 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2203 return EIO; 2204 } 2205 2206 /* initialize BBP registers to default values */ 2207 for (i = 0; i < nitems(rt2661_def_bbp); i++) { 2208 rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, 2209 rt2661_def_bbp[i].val); 2210 } 2211 2212 /* write vendor-specific BBP values (from EEPROM) */ 2213 for (i = 0; i < 16; i++) { 2214 if (sc->bbp_prom[i].reg == 0) 2215 continue; 2216 rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2217 } 2218 2219 return 0; 2220 } 2221 2222 static void 2223 rt2661_init_locked(struct rt2661_softc *sc) 2224 { 2225 struct ieee80211com *ic = &sc->sc_ic; 2226 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2227 uint32_t tmp, sta[3]; 2228 int i, error, ntries; 2229 2230 RAL_LOCK_ASSERT(sc); 2231 2232 if ((sc->sc_flags & RAL_FW_LOADED) == 0) { 2233 error = rt2661_load_microcode(sc); 2234 if (error != 0) { 2235 device_printf(sc->sc_dev, 2236 "%s: could not load 8051 microcode, error %d\n", 2237 __func__, error); 2238 return; 2239 } 2240 sc->sc_flags |= RAL_FW_LOADED; 2241 } 2242 2243 rt2661_stop_locked(sc); 2244 2245 /* initialize Tx rings */ 2246 RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); 2247 RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); 2248 RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); 2249 RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); 2250 2251 /* initialize Mgt ring */ 2252 RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); 2253 2254 /* initialize Rx ring */ 2255 RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); 2256 2257 /* initialize Tx rings sizes */ 2258 RAL_WRITE(sc, RT2661_TX_RING_CSR0, 2259 RT2661_TX_RING_COUNT << 24 | 2260 RT2661_TX_RING_COUNT << 16 | 2261 RT2661_TX_RING_COUNT << 8 | 2262 RT2661_TX_RING_COUNT); 2263 2264 RAL_WRITE(sc, RT2661_TX_RING_CSR1, 2265 RT2661_TX_DESC_WSIZE << 16 | 2266 RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ 2267 RT2661_MGT_RING_COUNT); 2268 2269 /* initialize Rx rings */ 2270 RAL_WRITE(sc, RT2661_RX_RING_CSR, 2271 RT2661_RX_DESC_BACK << 16 | 2272 RT2661_RX_DESC_WSIZE << 8 | 2273 RT2661_RX_RING_COUNT); 2274 2275 /* XXX: some magic here */ 2276 RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); 2277 2278 /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ 2279 RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); 2280 2281 /* load base address of Rx ring */ 2282 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); 2283 2284 /* initialize MAC registers to default values */ 2285 for (i = 0; i < nitems(rt2661_def_mac); i++) 2286 RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); 2287 2288 rt2661_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 2289 2290 /* set host ready */ 2291 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2292 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2293 2294 /* wait for BBP/RF to wakeup */ 2295 for (ntries = 0; ntries < 1000; ntries++) { 2296 if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) 2297 break; 2298 DELAY(1000); 2299 } 2300 if (ntries == 1000) { 2301 printf("timeout waiting for BBP/RF to wakeup\n"); 2302 rt2661_stop_locked(sc); 2303 return; 2304 } 2305 2306 if (rt2661_bbp_init(sc) != 0) { 2307 rt2661_stop_locked(sc); 2308 return; 2309 } 2310 2311 /* select default channel */ 2312 sc->sc_curchan = ic->ic_curchan; 2313 rt2661_select_band(sc, sc->sc_curchan); 2314 rt2661_select_antenna(sc); 2315 rt2661_set_chan(sc, sc->sc_curchan); 2316 2317 /* update Rx filter */ 2318 tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; 2319 2320 tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; 2321 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2322 tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | 2323 RT2661_DROP_ACKCTS; 2324 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 2325 ic->ic_opmode != IEEE80211_M_MBSS) 2326 tmp |= RT2661_DROP_TODS; 2327 if (ic->ic_promisc == 0) 2328 tmp |= RT2661_DROP_NOT_TO_ME; 2329 } 2330 2331 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2332 2333 /* clear STA registers */ 2334 RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, nitems(sta)); 2335 2336 /* initialize ASIC */ 2337 RAL_WRITE(sc, RT2661_MAC_CSR1, 4); 2338 2339 /* clear any pending interrupt */ 2340 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2341 2342 /* enable interrupts */ 2343 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 2344 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 2345 2346 /* kick Rx */ 2347 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); 2348 2349 sc->sc_flags |= RAL_RUNNING; 2350 2351 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 2352 } 2353 2354 static void 2355 rt2661_init(void *priv) 2356 { 2357 struct rt2661_softc *sc = priv; 2358 struct ieee80211com *ic = &sc->sc_ic; 2359 2360 RAL_LOCK(sc); 2361 rt2661_init_locked(sc); 2362 RAL_UNLOCK(sc); 2363 2364 if (sc->sc_flags & RAL_RUNNING) 2365 ieee80211_start_all(ic); /* start all vap's */ 2366 } 2367 2368 void 2369 rt2661_stop_locked(struct rt2661_softc *sc) 2370 { 2371 volatile int *flags = &sc->sc_flags; 2372 uint32_t tmp; 2373 2374 while (*flags & RAL_INPUT_RUNNING) 2375 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2376 2377 callout_stop(&sc->watchdog_ch); 2378 sc->sc_tx_timer = 0; 2379 2380 if (sc->sc_flags & RAL_RUNNING) { 2381 sc->sc_flags &= ~RAL_RUNNING; 2382 2383 /* abort Tx (for all 5 Tx rings) */ 2384 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); 2385 2386 /* disable Rx (value remains after reset!) */ 2387 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2388 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2389 2390 /* reset ASIC */ 2391 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2392 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2393 2394 /* disable interrupts */ 2395 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff); 2396 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 2397 2398 /* clear any pending interrupt */ 2399 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2400 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); 2401 2402 /* reset Tx and Rx rings */ 2403 rt2661_reset_tx_ring(sc, &sc->txq[0]); 2404 rt2661_reset_tx_ring(sc, &sc->txq[1]); 2405 rt2661_reset_tx_ring(sc, &sc->txq[2]); 2406 rt2661_reset_tx_ring(sc, &sc->txq[3]); 2407 rt2661_reset_tx_ring(sc, &sc->mgtq); 2408 rt2661_reset_rx_ring(sc, &sc->rxq); 2409 } 2410 } 2411 2412 void 2413 rt2661_stop(void *priv) 2414 { 2415 struct rt2661_softc *sc = priv; 2416 2417 RAL_LOCK(sc); 2418 rt2661_stop_locked(sc); 2419 RAL_UNLOCK(sc); 2420 } 2421 2422 static int 2423 rt2661_load_microcode(struct rt2661_softc *sc) 2424 { 2425 const struct firmware *fp; 2426 const char *imagename; 2427 int ntries, error; 2428 2429 RAL_LOCK_ASSERT(sc); 2430 2431 switch (sc->sc_id) { 2432 case 0x0301: imagename = "rt2561sfw"; break; 2433 case 0x0302: imagename = "rt2561fw"; break; 2434 case 0x0401: imagename = "rt2661fw"; break; 2435 default: 2436 device_printf(sc->sc_dev, "%s: unexpected pci device id 0x%x, " 2437 "don't know how to retrieve firmware\n", 2438 __func__, sc->sc_id); 2439 return EINVAL; 2440 } 2441 RAL_UNLOCK(sc); 2442 fp = firmware_get(imagename); 2443 RAL_LOCK(sc); 2444 if (fp == NULL) { 2445 device_printf(sc->sc_dev, 2446 "%s: unable to retrieve firmware image %s\n", 2447 __func__, imagename); 2448 return EINVAL; 2449 } 2450 2451 /* 2452 * Load 8051 microcode into NIC. 2453 */ 2454 /* reset 8051 */ 2455 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2456 2457 /* cancel any pending Host to MCU command */ 2458 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); 2459 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 2460 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); 2461 2462 /* write 8051's microcode */ 2463 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); 2464 RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize); 2465 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2466 2467 /* kick 8051's ass */ 2468 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); 2469 2470 /* wait for 8051 to initialize */ 2471 for (ntries = 0; ntries < 500; ntries++) { 2472 if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) 2473 break; 2474 DELAY(100); 2475 } 2476 if (ntries == 500) { 2477 device_printf(sc->sc_dev, 2478 "%s: timeout waiting for MCU to initialize\n", __func__); 2479 error = EIO; 2480 } else 2481 error = 0; 2482 2483 firmware_put(fp, FIRMWARE_UNLOAD); 2484 return error; 2485 } 2486 2487 #ifdef notyet 2488 /* 2489 * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and 2490 * false CCA count. This function is called periodically (every seconds) when 2491 * in the RUN state. Values taken from the reference driver. 2492 */ 2493 static void 2494 rt2661_rx_tune(struct rt2661_softc *sc) 2495 { 2496 uint8_t bbp17; 2497 uint16_t cca; 2498 int lo, hi, dbm; 2499 2500 /* 2501 * Tuning range depends on operating band and on the presence of an 2502 * external low-noise amplifier. 2503 */ 2504 lo = 0x20; 2505 if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) 2506 lo += 0x08; 2507 if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || 2508 (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) 2509 lo += 0x10; 2510 hi = lo + 0x20; 2511 2512 /* retrieve false CCA count since last call (clear on read) */ 2513 cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; 2514 2515 if (dbm >= -35) { 2516 bbp17 = 0x60; 2517 } else if (dbm >= -58) { 2518 bbp17 = hi; 2519 } else if (dbm >= -66) { 2520 bbp17 = lo + 0x10; 2521 } else if (dbm >= -74) { 2522 bbp17 = lo + 0x08; 2523 } else { 2524 /* RSSI < -74dBm, tune using false CCA count */ 2525 2526 bbp17 = sc->bbp17; /* current value */ 2527 2528 hi -= 2 * (-74 - dbm); 2529 if (hi < lo) 2530 hi = lo; 2531 2532 if (bbp17 > hi) { 2533 bbp17 = hi; 2534 2535 } else if (cca > 512) { 2536 if (++bbp17 > hi) 2537 bbp17 = hi; 2538 } else if (cca < 100) { 2539 if (--bbp17 < lo) 2540 bbp17 = lo; 2541 } 2542 } 2543 2544 if (bbp17 != sc->bbp17) { 2545 rt2661_bbp_write(sc, 17, bbp17); 2546 sc->bbp17 = bbp17; 2547 } 2548 } 2549 2550 /* 2551 * Enter/Leave radar detection mode. 2552 * This is for 802.11h additional regulatory domains. 2553 */ 2554 static void 2555 rt2661_radar_start(struct rt2661_softc *sc) 2556 { 2557 uint32_t tmp; 2558 2559 /* disable Rx */ 2560 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2561 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2562 2563 rt2661_bbp_write(sc, 82, 0x20); 2564 rt2661_bbp_write(sc, 83, 0x00); 2565 rt2661_bbp_write(sc, 84, 0x40); 2566 2567 /* save current BBP registers values */ 2568 sc->bbp18 = rt2661_bbp_read(sc, 18); 2569 sc->bbp21 = rt2661_bbp_read(sc, 21); 2570 sc->bbp22 = rt2661_bbp_read(sc, 22); 2571 sc->bbp16 = rt2661_bbp_read(sc, 16); 2572 sc->bbp17 = rt2661_bbp_read(sc, 17); 2573 sc->bbp64 = rt2661_bbp_read(sc, 64); 2574 2575 rt2661_bbp_write(sc, 18, 0xff); 2576 rt2661_bbp_write(sc, 21, 0x3f); 2577 rt2661_bbp_write(sc, 22, 0x3f); 2578 rt2661_bbp_write(sc, 16, 0xbd); 2579 rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); 2580 rt2661_bbp_write(sc, 64, 0x21); 2581 2582 /* restore Rx filter */ 2583 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2584 } 2585 2586 static int 2587 rt2661_radar_stop(struct rt2661_softc *sc) 2588 { 2589 uint8_t bbp66; 2590 2591 /* read radar detection result */ 2592 bbp66 = rt2661_bbp_read(sc, 66); 2593 2594 /* restore BBP registers values */ 2595 rt2661_bbp_write(sc, 16, sc->bbp16); 2596 rt2661_bbp_write(sc, 17, sc->bbp17); 2597 rt2661_bbp_write(sc, 18, sc->bbp18); 2598 rt2661_bbp_write(sc, 21, sc->bbp21); 2599 rt2661_bbp_write(sc, 22, sc->bbp22); 2600 rt2661_bbp_write(sc, 64, sc->bbp64); 2601 2602 return bbp66 == 1; 2603 } 2604 #endif 2605 2606 static int 2607 rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap) 2608 { 2609 struct ieee80211com *ic = vap->iv_ic; 2610 struct rt2661_tx_desc desc; 2611 struct mbuf *m0; 2612 int rate; 2613 2614 if ((m0 = ieee80211_beacon_alloc(vap->iv_bss))== NULL) { 2615 device_printf(sc->sc_dev, "could not allocate beacon frame\n"); 2616 return ENOBUFS; 2617 } 2618 2619 /* send beacons at the lowest available rate */ 2620 rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2; 2621 2622 rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, 2623 m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); 2624 2625 /* copy the first 24 bytes of Tx descriptor into NIC memory */ 2626 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); 2627 2628 /* copy beacon header and payload into NIC memory */ 2629 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, 2630 mtod(m0, uint8_t *), m0->m_pkthdr.len); 2631 2632 m_freem(m0); 2633 2634 return 0; 2635 } 2636 2637 /* 2638 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS 2639 * and HostAP operating modes. 2640 */ 2641 static void 2642 rt2661_enable_tsf_sync(struct rt2661_softc *sc) 2643 { 2644 struct ieee80211com *ic = &sc->sc_ic; 2645 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2646 uint32_t tmp; 2647 2648 if (vap->iv_opmode != IEEE80211_M_STA) { 2649 /* 2650 * Change default 16ms TBTT adjustment to 8ms. 2651 * Must be done before enabling beacon generation. 2652 */ 2653 RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); 2654 } 2655 2656 tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; 2657 2658 /* set beacon interval (in 1/16ms unit) */ 2659 tmp |= vap->iv_bss->ni_intval * 16; 2660 2661 tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; 2662 if (vap->iv_opmode == IEEE80211_M_STA) 2663 tmp |= RT2661_TSF_MODE(1); 2664 else 2665 tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; 2666 2667 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); 2668 } 2669 2670 static void 2671 rt2661_enable_tsf(struct rt2661_softc *sc) 2672 { 2673 RAL_WRITE(sc, RT2661_TXRX_CSR9, 2674 (RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000) 2675 | RT2661_TSF_TICKING | RT2661_TSF_MODE(2)); 2676 } 2677 2678 /* 2679 * Retrieve the "Received Signal Strength Indicator" from the raw values 2680 * contained in Rx descriptors. The computation depends on which band the 2681 * frame was received. Correction values taken from the reference driver. 2682 */ 2683 static int 2684 rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) 2685 { 2686 int lna, agc, rssi; 2687 2688 lna = (raw >> 5) & 0x3; 2689 agc = raw & 0x1f; 2690 2691 if (lna == 0) { 2692 /* 2693 * No mapping available. 2694 * 2695 * NB: Since RSSI is relative to noise floor, -1 is 2696 * adequate for caller to know error happened. 2697 */ 2698 return -1; 2699 } 2700 2701 rssi = (2 * agc) - RT2661_NOISE_FLOOR; 2702 2703 if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { 2704 rssi += sc->rssi_2ghz_corr; 2705 2706 if (lna == 1) 2707 rssi -= 64; 2708 else if (lna == 2) 2709 rssi -= 74; 2710 else if (lna == 3) 2711 rssi -= 90; 2712 } else { 2713 rssi += sc->rssi_5ghz_corr; 2714 2715 if (lna == 1) 2716 rssi -= 64; 2717 else if (lna == 2) 2718 rssi -= 86; 2719 else if (lna == 3) 2720 rssi -= 100; 2721 } 2722 return rssi; 2723 } 2724 2725 static void 2726 rt2661_scan_start(struct ieee80211com *ic) 2727 { 2728 struct rt2661_softc *sc = ic->ic_softc; 2729 uint32_t tmp; 2730 2731 /* abort TSF synchronization */ 2732 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 2733 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff); 2734 rt2661_set_bssid(sc, ieee80211broadcastaddr); 2735 } 2736 2737 static void 2738 rt2661_scan_end(struct ieee80211com *ic) 2739 { 2740 struct rt2661_softc *sc = ic->ic_softc; 2741 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2742 2743 rt2661_enable_tsf_sync(sc); 2744 /* XXX keep local copy */ 2745 rt2661_set_bssid(sc, vap->iv_bss->ni_bssid); 2746 } 2747 2748 static void 2749 rt2661_getradiocaps(struct ieee80211com *ic, 2750 int maxchans, int *nchans, struct ieee80211_channel chans[]) 2751 { 2752 struct rt2661_softc *sc = ic->ic_softc; 2753 uint8_t bands[IEEE80211_MODE_BYTES]; 2754 2755 memset(bands, 0, sizeof(bands)); 2756 setbit(bands, IEEE80211_MODE_11B); 2757 setbit(bands, IEEE80211_MODE_11G); 2758 ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, bands, 0); 2759 2760 if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) { 2761 setbit(bands, IEEE80211_MODE_11A); 2762 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, 2763 rt2661_chan_5ghz, nitems(rt2661_chan_5ghz), bands, 0); 2764 } 2765 } 2766 2767 static void 2768 rt2661_set_channel(struct ieee80211com *ic) 2769 { 2770 struct rt2661_softc *sc = ic->ic_softc; 2771 2772 RAL_LOCK(sc); 2773 rt2661_set_chan(sc, ic->ic_curchan); 2774 RAL_UNLOCK(sc); 2775 2776 } 2777