1 /* $FreeBSD$ */ 2 3 /*- 4 * Copyright (c) 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2561, RT2561S and RT2661 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/module.h> 39 #include <sys/bus.h> 40 #include <sys/endian.h> 41 #include <sys/firmware.h> 42 43 #include <machine/bus.h> 44 #include <machine/resource.h> 45 #include <sys/rman.h> 46 47 #include <net/bpf.h> 48 #include <net/if.h> 49 #include <net/if_arp.h> 50 #include <net/ethernet.h> 51 #include <net/if_dl.h> 52 #include <net/if_media.h> 53 #include <net/if_types.h> 54 55 #include <net80211/ieee80211_var.h> 56 #include <net80211/ieee80211_phy.h> 57 #include <net80211/ieee80211_radiotap.h> 58 #include <net80211/ieee80211_regdomain.h> 59 #include <net80211/ieee80211_amrr.h> 60 61 #include <netinet/in.h> 62 #include <netinet/in_systm.h> 63 #include <netinet/in_var.h> 64 #include <netinet/ip.h> 65 #include <netinet/if_ether.h> 66 67 #include <dev/ral/rt2661reg.h> 68 #include <dev/ral/rt2661var.h> 69 70 #define RAL_DEBUG 71 #ifdef RAL_DEBUG 72 #define DPRINTF(sc, fmt, ...) do { \ 73 if (sc->sc_debug > 0) \ 74 printf(fmt, __VA_ARGS__); \ 75 } while (0) 76 #define DPRINTFN(sc, n, fmt, ...) do { \ 77 if (sc->sc_debug >= (n)) \ 78 printf(fmt, __VA_ARGS__); \ 79 } while (0) 80 #else 81 #define DPRINTF(sc, fmt, ...) 82 #define DPRINTFN(sc, n, fmt, ...) 83 #endif 84 85 static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *, 86 const char name[IFNAMSIZ], int unit, int opmode, 87 int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], 88 const uint8_t mac[IEEE80211_ADDR_LEN]); 89 static void rt2661_vap_delete(struct ieee80211vap *); 90 static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int, 91 int); 92 static int rt2661_alloc_tx_ring(struct rt2661_softc *, 93 struct rt2661_tx_ring *, int); 94 static void rt2661_reset_tx_ring(struct rt2661_softc *, 95 struct rt2661_tx_ring *); 96 static void rt2661_free_tx_ring(struct rt2661_softc *, 97 struct rt2661_tx_ring *); 98 static int rt2661_alloc_rx_ring(struct rt2661_softc *, 99 struct rt2661_rx_ring *, int); 100 static void rt2661_reset_rx_ring(struct rt2661_softc *, 101 struct rt2661_rx_ring *); 102 static void rt2661_free_rx_ring(struct rt2661_softc *, 103 struct rt2661_rx_ring *); 104 static struct ieee80211_node *rt2661_node_alloc(struct ieee80211vap *, 105 const uint8_t [IEEE80211_ADDR_LEN]); 106 static void rt2661_newassoc(struct ieee80211_node *, int); 107 static int rt2661_newstate(struct ieee80211vap *, 108 enum ieee80211_state, int); 109 static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); 110 static void rt2661_rx_intr(struct rt2661_softc *); 111 static void rt2661_tx_intr(struct rt2661_softc *); 112 static void rt2661_tx_dma_intr(struct rt2661_softc *, 113 struct rt2661_tx_ring *); 114 static void rt2661_mcu_beacon_expire(struct rt2661_softc *); 115 static void rt2661_mcu_wakeup(struct rt2661_softc *); 116 static void rt2661_mcu_cmd_intr(struct rt2661_softc *); 117 static void rt2661_scan_start(struct ieee80211com *); 118 static void rt2661_scan_end(struct ieee80211com *); 119 static void rt2661_set_channel(struct ieee80211com *); 120 static void rt2661_setup_tx_desc(struct rt2661_softc *, 121 struct rt2661_tx_desc *, uint32_t, uint16_t, int, 122 int, const bus_dma_segment_t *, int, int); 123 static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, 124 struct ieee80211_node *, int); 125 static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, 126 struct ieee80211_node *); 127 static void rt2661_start_locked(struct ifnet *); 128 static void rt2661_start(struct ifnet *); 129 static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *, 130 const struct ieee80211_bpf_params *); 131 static void rt2661_watchdog(void *); 132 static int rt2661_ioctl(struct ifnet *, u_long, caddr_t); 133 static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, 134 uint8_t); 135 static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); 136 static void rt2661_rf_write(struct rt2661_softc *, uint8_t, 137 uint32_t); 138 static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, 139 uint16_t); 140 static void rt2661_select_antenna(struct rt2661_softc *); 141 static void rt2661_enable_mrr(struct rt2661_softc *); 142 static void rt2661_set_txpreamble(struct rt2661_softc *); 143 static void rt2661_set_basicrates(struct rt2661_softc *, 144 const struct ieee80211_rateset *); 145 static void rt2661_select_band(struct rt2661_softc *, 146 struct ieee80211_channel *); 147 static void rt2661_set_chan(struct rt2661_softc *, 148 struct ieee80211_channel *); 149 static void rt2661_set_bssid(struct rt2661_softc *, 150 const uint8_t *); 151 static void rt2661_set_macaddr(struct rt2661_softc *, 152 const uint8_t *); 153 static void rt2661_update_promisc(struct ifnet *); 154 static int rt2661_wme_update(struct ieee80211com *) __unused; 155 static void rt2661_update_slot(struct ifnet *); 156 static const char *rt2661_get_rf(int); 157 static void rt2661_read_eeprom(struct rt2661_softc *, 158 struct ieee80211com *); 159 static int rt2661_bbp_init(struct rt2661_softc *); 160 static void rt2661_init_locked(struct rt2661_softc *); 161 static void rt2661_init(void *); 162 static void rt2661_stop_locked(struct rt2661_softc *); 163 static void rt2661_stop(void *); 164 static int rt2661_load_microcode(struct rt2661_softc *); 165 #ifdef notyet 166 static void rt2661_rx_tune(struct rt2661_softc *); 167 static void rt2661_radar_start(struct rt2661_softc *); 168 static int rt2661_radar_stop(struct rt2661_softc *); 169 #endif 170 static int rt2661_prepare_beacon(struct rt2661_softc *, 171 struct ieee80211vap *); 172 static void rt2661_enable_tsf_sync(struct rt2661_softc *); 173 static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); 174 175 static const struct { 176 uint32_t reg; 177 uint32_t val; 178 } rt2661_def_mac[] = { 179 RT2661_DEF_MAC 180 }; 181 182 static const struct { 183 uint8_t reg; 184 uint8_t val; 185 } rt2661_def_bbp[] = { 186 RT2661_DEF_BBP 187 }; 188 189 static const struct rfprog { 190 uint8_t chan; 191 uint32_t r1, r2, r3, r4; 192 } rt2661_rf5225_1[] = { 193 RT2661_RF5225_1 194 }, rt2661_rf5225_2[] = { 195 RT2661_RF5225_2 196 }; 197 198 int 199 rt2661_attach(device_t dev, int id) 200 { 201 struct rt2661_softc *sc = device_get_softc(dev); 202 struct ieee80211com *ic; 203 struct ifnet *ifp; 204 uint32_t val; 205 int error, ac, ntries; 206 uint8_t bands; 207 208 sc->sc_id = id; 209 sc->sc_dev = dev; 210 211 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); 212 if (ifp == NULL) { 213 device_printf(sc->sc_dev, "can not if_alloc()\n"); 214 return ENOMEM; 215 } 216 ic = ifp->if_l2com; 217 218 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 219 MTX_DEF | MTX_RECURSE); 220 221 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 222 223 /* wait for NIC to initialize */ 224 for (ntries = 0; ntries < 1000; ntries++) { 225 if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) 226 break; 227 DELAY(1000); 228 } 229 if (ntries == 1000) { 230 device_printf(sc->sc_dev, 231 "timeout waiting for NIC to initialize\n"); 232 error = EIO; 233 goto fail1; 234 } 235 236 /* retrieve RF rev. no and various other things from EEPROM */ 237 rt2661_read_eeprom(sc, ic); 238 239 device_printf(dev, "MAC/BBP RT%X, RF %s\n", val, 240 rt2661_get_rf(sc->rf_rev)); 241 242 /* 243 * Allocate Tx and Rx rings. 244 */ 245 for (ac = 0; ac < 4; ac++) { 246 error = rt2661_alloc_tx_ring(sc, &sc->txq[ac], 247 RT2661_TX_RING_COUNT); 248 if (error != 0) { 249 device_printf(sc->sc_dev, 250 "could not allocate Tx ring %d\n", ac); 251 goto fail2; 252 } 253 } 254 255 error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); 256 if (error != 0) { 257 device_printf(sc->sc_dev, "could not allocate Mgt ring\n"); 258 goto fail2; 259 } 260 261 error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); 262 if (error != 0) { 263 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 264 goto fail3; 265 } 266 267 ifp->if_softc = sc; 268 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 269 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 270 ifp->if_init = rt2661_init; 271 ifp->if_ioctl = rt2661_ioctl; 272 ifp->if_start = rt2661_start; 273 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); 274 ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; 275 IFQ_SET_READY(&ifp->if_snd); 276 277 ic->ic_ifp = ifp; 278 ic->ic_opmode = IEEE80211_M_STA; 279 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 280 281 /* set device capabilities */ 282 ic->ic_caps = 283 IEEE80211_C_STA /* station mode */ 284 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 285 | IEEE80211_C_HOSTAP /* hostap mode */ 286 | IEEE80211_C_MONITOR /* monitor mode */ 287 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 288 | IEEE80211_C_WDS /* 4-address traffic works */ 289 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 290 | IEEE80211_C_SHSLOT /* short slot time supported */ 291 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 292 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 293 #ifdef notyet 294 | IEEE80211_C_TXFRAG /* handle tx frags */ 295 | IEEE80211_C_WME /* 802.11e */ 296 #endif 297 ; 298 299 bands = 0; 300 setbit(&bands, IEEE80211_MODE_11B); 301 setbit(&bands, IEEE80211_MODE_11G); 302 if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) 303 setbit(&bands, IEEE80211_MODE_11A); 304 ieee80211_init_channels(ic, NULL, &bands); 305 306 ieee80211_ifattach(ic); 307 ic->ic_newassoc = rt2661_newassoc; 308 ic->ic_node_alloc = rt2661_node_alloc; 309 #if 0 310 ic->ic_wme.wme_update = rt2661_wme_update; 311 #endif 312 ic->ic_scan_start = rt2661_scan_start; 313 ic->ic_scan_end = rt2661_scan_end; 314 ic->ic_set_channel = rt2661_set_channel; 315 ic->ic_updateslot = rt2661_update_slot; 316 ic->ic_update_promisc = rt2661_update_promisc; 317 ic->ic_raw_xmit = rt2661_raw_xmit; 318 319 ic->ic_vap_create = rt2661_vap_create; 320 ic->ic_vap_delete = rt2661_vap_delete; 321 322 sc->sc_rates = ieee80211_get_ratetable(ic->ic_curchan); 323 324 bpfattach(ifp, DLT_IEEE802_11_RADIO, 325 sizeof (struct ieee80211_frame) + sizeof (sc->sc_txtap)); 326 327 sc->sc_rxtap_len = sizeof sc->sc_rxtap; 328 sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); 329 sc->sc_rxtap.wr_ihdr.it_present = htole32(RT2661_RX_RADIOTAP_PRESENT); 330 331 sc->sc_txtap_len = sizeof sc->sc_txtap; 332 sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); 333 sc->sc_txtap.wt_ihdr.it_present = htole32(RT2661_TX_RADIOTAP_PRESENT); 334 335 #ifdef RAL_DEBUG 336 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 337 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 338 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 339 #endif 340 if (bootverbose) 341 ieee80211_announce(ic); 342 343 return 0; 344 345 fail3: rt2661_free_tx_ring(sc, &sc->mgtq); 346 fail2: while (--ac >= 0) 347 rt2661_free_tx_ring(sc, &sc->txq[ac]); 348 fail1: mtx_destroy(&sc->sc_mtx); 349 if_free(ifp); 350 return error; 351 } 352 353 int 354 rt2661_detach(void *xsc) 355 { 356 struct rt2661_softc *sc = xsc; 357 struct ifnet *ifp = sc->sc_ifp; 358 struct ieee80211com *ic = ifp->if_l2com; 359 360 RAL_LOCK(sc); 361 rt2661_stop_locked(sc); 362 RAL_UNLOCK(sc); 363 364 bpfdetach(ifp); 365 ieee80211_ifdetach(ic); 366 367 rt2661_free_tx_ring(sc, &sc->txq[0]); 368 rt2661_free_tx_ring(sc, &sc->txq[1]); 369 rt2661_free_tx_ring(sc, &sc->txq[2]); 370 rt2661_free_tx_ring(sc, &sc->txq[3]); 371 rt2661_free_tx_ring(sc, &sc->mgtq); 372 rt2661_free_rx_ring(sc, &sc->rxq); 373 374 if_free(ifp); 375 376 mtx_destroy(&sc->sc_mtx); 377 378 return 0; 379 } 380 381 static struct ieee80211vap * 382 rt2661_vap_create(struct ieee80211com *ic, 383 const char name[IFNAMSIZ], int unit, int opmode, int flags, 384 const uint8_t bssid[IEEE80211_ADDR_LEN], 385 const uint8_t mac[IEEE80211_ADDR_LEN]) 386 { 387 struct ifnet *ifp = ic->ic_ifp; 388 struct rt2661_vap *rvp; 389 struct ieee80211vap *vap; 390 391 switch (opmode) { 392 case IEEE80211_M_STA: 393 case IEEE80211_M_IBSS: 394 case IEEE80211_M_AHDEMO: 395 case IEEE80211_M_MONITOR: 396 case IEEE80211_M_HOSTAP: 397 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 398 if_printf(ifp, "only 1 vap supported\n"); 399 return NULL; 400 } 401 if (opmode == IEEE80211_M_STA) 402 flags |= IEEE80211_CLONE_NOBEACONS; 403 break; 404 case IEEE80211_M_WDS: 405 if (TAILQ_EMPTY(&ic->ic_vaps) || 406 ic->ic_opmode != IEEE80211_M_HOSTAP) { 407 if_printf(ifp, "wds only supported in ap mode\n"); 408 return NULL; 409 } 410 /* 411 * Silently remove any request for a unique 412 * bssid; WDS vap's always share the local 413 * mac address. 414 */ 415 flags &= ~IEEE80211_CLONE_BSSID; 416 break; 417 default: 418 if_printf(ifp, "unknown opmode %d\n", opmode); 419 return NULL; 420 } 421 rvp = (struct rt2661_vap *) malloc(sizeof(struct rt2661_vap), 422 M_80211_VAP, M_NOWAIT | M_ZERO); 423 if (rvp == NULL) 424 return NULL; 425 vap = &rvp->ral_vap; 426 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac); 427 428 /* override state transition machine */ 429 rvp->ral_newstate = vap->iv_newstate; 430 vap->iv_newstate = rt2661_newstate; 431 #if 0 432 vap->iv_update_beacon = rt2661_beacon_update; 433 #endif 434 435 ieee80211_amrr_init(&rvp->amrr, vap, 436 IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD, 437 IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD, 438 500 /* ms */); 439 440 /* complete setup */ 441 ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status); 442 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 443 ic->ic_opmode = opmode; 444 return vap; 445 } 446 447 static void 448 rt2661_vap_delete(struct ieee80211vap *vap) 449 { 450 struct rt2661_vap *rvp = RT2661_VAP(vap); 451 452 ieee80211_amrr_cleanup(&rvp->amrr); 453 ieee80211_vap_detach(vap); 454 free(rvp, M_80211_VAP); 455 } 456 457 void 458 rt2661_shutdown(void *xsc) 459 { 460 struct rt2661_softc *sc = xsc; 461 462 rt2661_stop(sc); 463 } 464 465 void 466 rt2661_suspend(void *xsc) 467 { 468 struct rt2661_softc *sc = xsc; 469 470 rt2661_stop(sc); 471 } 472 473 void 474 rt2661_resume(void *xsc) 475 { 476 struct rt2661_softc *sc = xsc; 477 struct ifnet *ifp = sc->sc_ifp; 478 479 if (ifp->if_flags & IFF_UP) 480 rt2661_init(sc); 481 } 482 483 static void 484 rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 485 { 486 if (error != 0) 487 return; 488 489 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 490 491 *(bus_addr_t *)arg = segs[0].ds_addr; 492 } 493 494 static int 495 rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, 496 int count) 497 { 498 int i, error; 499 500 ring->count = count; 501 ring->queued = 0; 502 ring->cur = ring->next = ring->stat = 0; 503 504 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 505 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 506 count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 507 0, NULL, NULL, &ring->desc_dmat); 508 if (error != 0) { 509 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 510 goto fail; 511 } 512 513 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 514 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 515 if (error != 0) { 516 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 517 goto fail; 518 } 519 520 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 521 count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 522 0); 523 if (error != 0) { 524 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 525 goto fail; 526 } 527 528 ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, 529 M_NOWAIT | M_ZERO); 530 if (ring->data == NULL) { 531 device_printf(sc->sc_dev, "could not allocate soft data\n"); 532 error = ENOMEM; 533 goto fail; 534 } 535 536 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 537 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 538 RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 539 if (error != 0) { 540 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 541 goto fail; 542 } 543 544 for (i = 0; i < count; i++) { 545 error = bus_dmamap_create(ring->data_dmat, 0, 546 &ring->data[i].map); 547 if (error != 0) { 548 device_printf(sc->sc_dev, "could not create DMA map\n"); 549 goto fail; 550 } 551 } 552 553 return 0; 554 555 fail: rt2661_free_tx_ring(sc, ring); 556 return error; 557 } 558 559 static void 560 rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 561 { 562 struct rt2661_tx_desc *desc; 563 struct rt2661_tx_data *data; 564 int i; 565 566 for (i = 0; i < ring->count; i++) { 567 desc = &ring->desc[i]; 568 data = &ring->data[i]; 569 570 if (data->m != NULL) { 571 bus_dmamap_sync(ring->data_dmat, data->map, 572 BUS_DMASYNC_POSTWRITE); 573 bus_dmamap_unload(ring->data_dmat, data->map); 574 m_freem(data->m); 575 data->m = NULL; 576 } 577 578 if (data->ni != NULL) { 579 ieee80211_free_node(data->ni); 580 data->ni = NULL; 581 } 582 583 desc->flags = 0; 584 } 585 586 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 587 588 ring->queued = 0; 589 ring->cur = ring->next = ring->stat = 0; 590 } 591 592 static void 593 rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) 594 { 595 struct rt2661_tx_data *data; 596 int i; 597 598 if (ring->desc != NULL) { 599 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 600 BUS_DMASYNC_POSTWRITE); 601 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 602 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 603 } 604 605 if (ring->desc_dmat != NULL) 606 bus_dma_tag_destroy(ring->desc_dmat); 607 608 if (ring->data != NULL) { 609 for (i = 0; i < ring->count; i++) { 610 data = &ring->data[i]; 611 612 if (data->m != NULL) { 613 bus_dmamap_sync(ring->data_dmat, data->map, 614 BUS_DMASYNC_POSTWRITE); 615 bus_dmamap_unload(ring->data_dmat, data->map); 616 m_freem(data->m); 617 } 618 619 if (data->ni != NULL) 620 ieee80211_free_node(data->ni); 621 622 if (data->map != NULL) 623 bus_dmamap_destroy(ring->data_dmat, data->map); 624 } 625 626 free(ring->data, M_DEVBUF); 627 } 628 629 if (ring->data_dmat != NULL) 630 bus_dma_tag_destroy(ring->data_dmat); 631 } 632 633 static int 634 rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, 635 int count) 636 { 637 struct rt2661_rx_desc *desc; 638 struct rt2661_rx_data *data; 639 bus_addr_t physaddr; 640 int i, error; 641 642 ring->count = count; 643 ring->cur = ring->next = 0; 644 645 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 646 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 647 count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 648 0, NULL, NULL, &ring->desc_dmat); 649 if (error != 0) { 650 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 651 goto fail; 652 } 653 654 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 655 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 656 if (error != 0) { 657 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 658 goto fail; 659 } 660 661 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 662 count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 663 0); 664 if (error != 0) { 665 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 666 goto fail; 667 } 668 669 ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, 670 M_NOWAIT | M_ZERO); 671 if (ring->data == NULL) { 672 device_printf(sc->sc_dev, "could not allocate soft data\n"); 673 error = ENOMEM; 674 goto fail; 675 } 676 677 /* 678 * Pre-allocate Rx buffers and populate Rx ring. 679 */ 680 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 681 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 682 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 683 if (error != 0) { 684 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 685 goto fail; 686 } 687 688 for (i = 0; i < count; i++) { 689 desc = &sc->rxq.desc[i]; 690 data = &sc->rxq.data[i]; 691 692 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 693 if (error != 0) { 694 device_printf(sc->sc_dev, "could not create DMA map\n"); 695 goto fail; 696 } 697 698 data->m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 699 if (data->m == NULL) { 700 device_printf(sc->sc_dev, 701 "could not allocate rx mbuf\n"); 702 error = ENOMEM; 703 goto fail; 704 } 705 706 error = bus_dmamap_load(ring->data_dmat, data->map, 707 mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, 708 &physaddr, 0); 709 if (error != 0) { 710 device_printf(sc->sc_dev, 711 "could not load rx buf DMA map"); 712 goto fail; 713 } 714 715 desc->flags = htole32(RT2661_RX_BUSY); 716 desc->physaddr = htole32(physaddr); 717 } 718 719 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 720 721 return 0; 722 723 fail: rt2661_free_rx_ring(sc, ring); 724 return error; 725 } 726 727 static void 728 rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 729 { 730 int i; 731 732 for (i = 0; i < ring->count; i++) 733 ring->desc[i].flags = htole32(RT2661_RX_BUSY); 734 735 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 736 737 ring->cur = ring->next = 0; 738 } 739 740 static void 741 rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) 742 { 743 struct rt2661_rx_data *data; 744 int i; 745 746 if (ring->desc != NULL) { 747 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 748 BUS_DMASYNC_POSTWRITE); 749 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 750 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 751 } 752 753 if (ring->desc_dmat != NULL) 754 bus_dma_tag_destroy(ring->desc_dmat); 755 756 if (ring->data != NULL) { 757 for (i = 0; i < ring->count; i++) { 758 data = &ring->data[i]; 759 760 if (data->m != NULL) { 761 bus_dmamap_sync(ring->data_dmat, data->map, 762 BUS_DMASYNC_POSTREAD); 763 bus_dmamap_unload(ring->data_dmat, data->map); 764 m_freem(data->m); 765 } 766 767 if (data->map != NULL) 768 bus_dmamap_destroy(ring->data_dmat, data->map); 769 } 770 771 free(ring->data, M_DEVBUF); 772 } 773 774 if (ring->data_dmat != NULL) 775 bus_dma_tag_destroy(ring->data_dmat); 776 } 777 778 static struct ieee80211_node * 779 rt2661_node_alloc(struct ieee80211vap *vap, 780 const uint8_t mac[IEEE80211_ADDR_LEN]) 781 { 782 struct rt2661_node *rn; 783 784 rn = malloc(sizeof (struct rt2661_node), M_80211_NODE, 785 M_NOWAIT | M_ZERO); 786 787 return (rn != NULL) ? &rn->ni : NULL; 788 } 789 790 static void 791 rt2661_newassoc(struct ieee80211_node *ni, int isnew) 792 { 793 struct ieee80211vap *vap = ni->ni_vap; 794 795 ieee80211_amrr_node_init(&RT2661_VAP(vap)->amrr, 796 &RT2661_NODE(ni)->amrr, ni); 797 } 798 799 static int 800 rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 801 { 802 struct rt2661_vap *rvp = RT2661_VAP(vap); 803 struct ieee80211com *ic = vap->iv_ic; 804 struct rt2661_softc *sc = ic->ic_ifp->if_softc; 805 int error; 806 807 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 808 uint32_t tmp; 809 810 /* abort TSF synchronization */ 811 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 812 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); 813 } 814 815 error = rvp->ral_newstate(vap, nstate, arg); 816 817 if (error == 0 && nstate == IEEE80211_S_RUN) { 818 struct ieee80211_node *ni = vap->iv_bss; 819 820 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 821 rt2661_enable_mrr(sc); 822 rt2661_set_txpreamble(sc); 823 rt2661_set_basicrates(sc, &ni->ni_rates); 824 rt2661_set_bssid(sc, ni->ni_bssid); 825 } 826 827 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 828 vap->iv_opmode == IEEE80211_M_IBSS) { 829 error = rt2661_prepare_beacon(sc, vap); 830 if (error != 0) 831 return error; 832 } 833 if (vap->iv_opmode != IEEE80211_M_MONITOR) 834 rt2661_enable_tsf_sync(sc); 835 } 836 return error; 837 } 838 839 /* 840 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 841 * 93C66). 842 */ 843 static uint16_t 844 rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) 845 { 846 uint32_t tmp; 847 uint16_t val; 848 int n; 849 850 /* clock C once before the first command */ 851 RT2661_EEPROM_CTL(sc, 0); 852 853 RT2661_EEPROM_CTL(sc, RT2661_S); 854 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 855 RT2661_EEPROM_CTL(sc, RT2661_S); 856 857 /* write start bit (1) */ 858 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 859 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 860 861 /* write READ opcode (10) */ 862 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); 863 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); 864 RT2661_EEPROM_CTL(sc, RT2661_S); 865 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 866 867 /* write address (A5-A0 or A7-A0) */ 868 n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; 869 for (; n >= 0; n--) { 870 RT2661_EEPROM_CTL(sc, RT2661_S | 871 (((addr >> n) & 1) << RT2661_SHIFT_D)); 872 RT2661_EEPROM_CTL(sc, RT2661_S | 873 (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); 874 } 875 876 RT2661_EEPROM_CTL(sc, RT2661_S); 877 878 /* read data Q15-Q0 */ 879 val = 0; 880 for (n = 15; n >= 0; n--) { 881 RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); 882 tmp = RAL_READ(sc, RT2661_E2PROM_CSR); 883 val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; 884 RT2661_EEPROM_CTL(sc, RT2661_S); 885 } 886 887 RT2661_EEPROM_CTL(sc, 0); 888 889 /* clear Chip Select and clock C */ 890 RT2661_EEPROM_CTL(sc, RT2661_S); 891 RT2661_EEPROM_CTL(sc, 0); 892 RT2661_EEPROM_CTL(sc, RT2661_C); 893 894 return val; 895 } 896 897 static void 898 rt2661_tx_intr(struct rt2661_softc *sc) 899 { 900 struct ifnet *ifp = sc->sc_ifp; 901 struct rt2661_tx_ring *txq; 902 struct rt2661_tx_data *data; 903 struct rt2661_node *rn; 904 uint32_t val; 905 int qid, retrycnt; 906 907 for (;;) { 908 struct ieee80211_node *ni; 909 struct mbuf *m; 910 911 val = RAL_READ(sc, RT2661_STA_CSR4); 912 if (!(val & RT2661_TX_STAT_VALID)) 913 break; 914 915 /* retrieve the queue in which this frame was sent */ 916 qid = RT2661_TX_QID(val); 917 txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; 918 919 /* retrieve rate control algorithm context */ 920 data = &txq->data[txq->stat]; 921 m = data->m; 922 data->m = NULL; 923 ni = data->ni; 924 data->ni = NULL; 925 926 /* if no frame has been sent, ignore */ 927 if (ni == NULL) 928 continue; 929 930 rn = RT2661_NODE(ni); 931 932 switch (RT2661_TX_RESULT(val)) { 933 case RT2661_TX_SUCCESS: 934 retrycnt = RT2661_TX_RETRYCNT(val); 935 936 DPRINTFN(sc, 10, "data frame sent successfully after " 937 "%d retries\n", retrycnt); 938 if (data->rix != IEEE80211_FIXED_RATE_NONE) 939 ieee80211_amrr_tx_complete(&rn->amrr, 940 IEEE80211_AMRR_SUCCESS, retrycnt); 941 ifp->if_opackets++; 942 break; 943 944 case RT2661_TX_RETRY_FAIL: 945 retrycnt = RT2661_TX_RETRYCNT(val); 946 947 DPRINTFN(sc, 9, "%s\n", 948 "sending data frame failed (too much retries)"); 949 if (data->rix != IEEE80211_FIXED_RATE_NONE) 950 ieee80211_amrr_tx_complete(&rn->amrr, 951 IEEE80211_AMRR_FAILURE, retrycnt); 952 ifp->if_oerrors++; 953 break; 954 955 default: 956 /* other failure */ 957 device_printf(sc->sc_dev, 958 "sending data frame failed 0x%08x\n", val); 959 ifp->if_oerrors++; 960 } 961 962 DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat); 963 964 txq->queued--; 965 if (++txq->stat >= txq->count) /* faster than % count */ 966 txq->stat = 0; 967 968 if (m->m_flags & M_TXCB) 969 ieee80211_process_callback(ni, m, 970 RT2661_TX_RESULT(val) != RT2661_TX_SUCCESS); 971 m_freem(m); 972 ieee80211_free_node(ni); 973 } 974 975 sc->sc_tx_timer = 0; 976 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 977 978 rt2661_start_locked(ifp); 979 } 980 981 static void 982 rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) 983 { 984 struct rt2661_tx_desc *desc; 985 struct rt2661_tx_data *data; 986 987 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD); 988 989 for (;;) { 990 desc = &txq->desc[txq->next]; 991 data = &txq->data[txq->next]; 992 993 if ((le32toh(desc->flags) & RT2661_TX_BUSY) || 994 !(le32toh(desc->flags) & RT2661_TX_VALID)) 995 break; 996 997 bus_dmamap_sync(txq->data_dmat, data->map, 998 BUS_DMASYNC_POSTWRITE); 999 bus_dmamap_unload(txq->data_dmat, data->map); 1000 1001 /* descriptor is no longer valid */ 1002 desc->flags &= ~htole32(RT2661_TX_VALID); 1003 1004 DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next); 1005 1006 if (++txq->next >= txq->count) /* faster than % count */ 1007 txq->next = 0; 1008 } 1009 1010 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1011 } 1012 1013 static void 1014 rt2661_rx_intr(struct rt2661_softc *sc) 1015 { 1016 struct ifnet *ifp = sc->sc_ifp; 1017 struct ieee80211com *ic = ifp->if_l2com; 1018 struct rt2661_rx_desc *desc; 1019 struct rt2661_rx_data *data; 1020 bus_addr_t physaddr; 1021 struct ieee80211_frame *wh; 1022 struct ieee80211_node *ni; 1023 struct mbuf *mnew, *m; 1024 int error; 1025 1026 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1027 BUS_DMASYNC_POSTREAD); 1028 1029 for (;;) { 1030 int rssi; 1031 1032 desc = &sc->rxq.desc[sc->rxq.cur]; 1033 data = &sc->rxq.data[sc->rxq.cur]; 1034 1035 if (le32toh(desc->flags) & RT2661_RX_BUSY) 1036 break; 1037 1038 if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || 1039 (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { 1040 /* 1041 * This should not happen since we did not request 1042 * to receive those frames when we filled TXRX_CSR0. 1043 */ 1044 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 1045 le32toh(desc->flags)); 1046 ifp->if_ierrors++; 1047 goto skip; 1048 } 1049 1050 if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { 1051 ifp->if_ierrors++; 1052 goto skip; 1053 } 1054 1055 /* 1056 * Try to allocate a new mbuf for this ring element and load it 1057 * before processing the current mbuf. If the ring element 1058 * cannot be loaded, drop the received packet and reuse the old 1059 * mbuf. In the unlikely case that the old mbuf can't be 1060 * reloaded either, explicitly panic. 1061 */ 1062 mnew = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 1063 if (mnew == NULL) { 1064 ifp->if_ierrors++; 1065 goto skip; 1066 } 1067 1068 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1069 BUS_DMASYNC_POSTREAD); 1070 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1071 1072 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1073 mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr, 1074 &physaddr, 0); 1075 if (error != 0) { 1076 m_freem(mnew); 1077 1078 /* try to reload the old mbuf */ 1079 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1080 mtod(data->m, void *), MCLBYTES, 1081 rt2661_dma_map_addr, &physaddr, 0); 1082 if (error != 0) { 1083 /* very unlikely that it will fail... */ 1084 panic("%s: could not load old rx mbuf", 1085 device_get_name(sc->sc_dev)); 1086 } 1087 ifp->if_ierrors++; 1088 goto skip; 1089 } 1090 1091 /* 1092 * New mbuf successfully loaded, update Rx ring and continue 1093 * processing. 1094 */ 1095 m = data->m; 1096 data->m = mnew; 1097 desc->physaddr = htole32(physaddr); 1098 1099 /* finalize mbuf */ 1100 m->m_pkthdr.rcvif = ifp; 1101 m->m_pkthdr.len = m->m_len = 1102 (le32toh(desc->flags) >> 16) & 0xfff; 1103 1104 rssi = rt2661_get_rssi(sc, desc->rssi); 1105 1106 if (bpf_peers_present(ifp->if_bpf)) { 1107 struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; 1108 uint32_t tsf_lo, tsf_hi; 1109 1110 /* get timestamp (low and high 32 bits) */ 1111 tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); 1112 tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); 1113 1114 tap->wr_tsf = 1115 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1116 tap->wr_flags = 0; 1117 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1118 (desc->flags & htole32(RT2661_RX_OFDM)) ? 1119 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1120 tap->wr_antsignal = rssi < 0 ? 0 : rssi; 1121 1122 bpf_mtap2(ifp->if_bpf, tap, sc->sc_rxtap_len, m); 1123 } 1124 sc->sc_flags |= RAL_INPUT_RUNNING; 1125 RAL_UNLOCK(sc); 1126 wh = mtod(m, struct ieee80211_frame *); 1127 1128 /* send the frame to the 802.11 layer */ 1129 ni = ieee80211_find_rxnode(ic, 1130 (struct ieee80211_frame_min *)wh); 1131 if (ni != NULL) { 1132 /* Error happened during RSSI conversion. */ 1133 if (rssi < 0) 1134 rssi = -30; /* XXX ignored by net80211 */ 1135 1136 (void) ieee80211_input(ni, m, rssi, 1137 RT2661_NOISE_FLOOR, 0); 1138 ieee80211_free_node(ni); 1139 } else 1140 (void) ieee80211_input_all(ic, m, rssi, 1141 RT2661_NOISE_FLOOR, 0); 1142 1143 RAL_LOCK(sc); 1144 sc->sc_flags &= ~RAL_INPUT_RUNNING; 1145 1146 skip: desc->flags |= htole32(RT2661_RX_BUSY); 1147 1148 DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur); 1149 1150 sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; 1151 } 1152 1153 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1154 BUS_DMASYNC_PREWRITE); 1155 } 1156 1157 /* ARGSUSED */ 1158 static void 1159 rt2661_mcu_beacon_expire(struct rt2661_softc *sc) 1160 { 1161 /* do nothing */ 1162 } 1163 1164 static void 1165 rt2661_mcu_wakeup(struct rt2661_softc *sc) 1166 { 1167 RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); 1168 1169 RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); 1170 RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); 1171 RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); 1172 1173 /* send wakeup command to MCU */ 1174 rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); 1175 } 1176 1177 static void 1178 rt2661_mcu_cmd_intr(struct rt2661_softc *sc) 1179 { 1180 RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); 1181 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 1182 } 1183 1184 void 1185 rt2661_intr(void *arg) 1186 { 1187 struct rt2661_softc *sc = arg; 1188 struct ifnet *ifp = sc->sc_ifp; 1189 uint32_t r1, r2; 1190 1191 RAL_LOCK(sc); 1192 1193 /* disable MAC and MCU interrupts */ 1194 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); 1195 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 1196 1197 /* don't re-enable interrupts if we're shutting down */ 1198 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 1199 RAL_UNLOCK(sc); 1200 return; 1201 } 1202 1203 r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); 1204 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); 1205 1206 r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); 1207 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); 1208 1209 if (r1 & RT2661_MGT_DONE) 1210 rt2661_tx_dma_intr(sc, &sc->mgtq); 1211 1212 if (r1 & RT2661_RX_DONE) 1213 rt2661_rx_intr(sc); 1214 1215 if (r1 & RT2661_TX0_DMA_DONE) 1216 rt2661_tx_dma_intr(sc, &sc->txq[0]); 1217 1218 if (r1 & RT2661_TX1_DMA_DONE) 1219 rt2661_tx_dma_intr(sc, &sc->txq[1]); 1220 1221 if (r1 & RT2661_TX2_DMA_DONE) 1222 rt2661_tx_dma_intr(sc, &sc->txq[2]); 1223 1224 if (r1 & RT2661_TX3_DMA_DONE) 1225 rt2661_tx_dma_intr(sc, &sc->txq[3]); 1226 1227 if (r1 & RT2661_TX_DONE) 1228 rt2661_tx_intr(sc); 1229 1230 if (r2 & RT2661_MCU_CMD_DONE) 1231 rt2661_mcu_cmd_intr(sc); 1232 1233 if (r2 & RT2661_MCU_BEACON_EXPIRE) 1234 rt2661_mcu_beacon_expire(sc); 1235 1236 if (r2 & RT2661_MCU_WAKEUP) 1237 rt2661_mcu_wakeup(sc); 1238 1239 /* re-enable MAC and MCU interrupts */ 1240 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 1241 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 1242 1243 RAL_UNLOCK(sc); 1244 } 1245 1246 static uint8_t 1247 rt2661_plcp_signal(int rate) 1248 { 1249 switch (rate) { 1250 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1251 case 12: return 0xb; 1252 case 18: return 0xf; 1253 case 24: return 0xa; 1254 case 36: return 0xe; 1255 case 48: return 0x9; 1256 case 72: return 0xd; 1257 case 96: return 0x8; 1258 case 108: return 0xc; 1259 1260 /* CCK rates (NB: not IEEE std, device-specific) */ 1261 case 2: return 0x0; 1262 case 4: return 0x1; 1263 case 11: return 0x2; 1264 case 22: return 0x3; 1265 } 1266 return 0xff; /* XXX unsupported/unknown rate */ 1267 } 1268 1269 static void 1270 rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, 1271 uint32_t flags, uint16_t xflags, int len, int rate, 1272 const bus_dma_segment_t *segs, int nsegs, int ac) 1273 { 1274 struct ifnet *ifp = sc->sc_ifp; 1275 struct ieee80211com *ic = ifp->if_l2com; 1276 uint16_t plcp_length; 1277 int i, remainder; 1278 1279 desc->flags = htole32(flags); 1280 desc->flags |= htole32(len << 16); 1281 desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); 1282 1283 desc->xflags = htole16(xflags); 1284 desc->xflags |= htole16(nsegs << 13); 1285 1286 desc->wme = htole16( 1287 RT2661_QID(ac) | 1288 RT2661_AIFSN(2) | 1289 RT2661_LOGCWMIN(4) | 1290 RT2661_LOGCWMAX(10)); 1291 1292 /* 1293 * Remember in which queue this frame was sent. This field is driver 1294 * private data only. It will be made available by the NIC in STA_CSR4 1295 * on Tx interrupts. 1296 */ 1297 desc->qid = ac; 1298 1299 /* setup PLCP fields */ 1300 desc->plcp_signal = rt2661_plcp_signal(rate); 1301 desc->plcp_service = 4; 1302 1303 len += IEEE80211_CRC_LEN; 1304 if (ieee80211_rate2phytype(sc->sc_rates, rate) == IEEE80211_T_OFDM) { 1305 desc->flags |= htole32(RT2661_TX_OFDM); 1306 1307 plcp_length = len & 0xfff; 1308 desc->plcp_length_hi = plcp_length >> 6; 1309 desc->plcp_length_lo = plcp_length & 0x3f; 1310 } else { 1311 plcp_length = (16 * len + rate - 1) / rate; 1312 if (rate == 22) { 1313 remainder = (16 * len) % 22; 1314 if (remainder != 0 && remainder < 7) 1315 desc->plcp_service |= RT2661_PLCP_LENGEXT; 1316 } 1317 desc->plcp_length_hi = plcp_length >> 8; 1318 desc->plcp_length_lo = plcp_length & 0xff; 1319 1320 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1321 desc->plcp_signal |= 0x08; 1322 } 1323 1324 /* RT2x61 supports scatter with up to 5 segments */ 1325 for (i = 0; i < nsegs; i++) { 1326 desc->addr[i] = htole32(segs[i].ds_addr); 1327 desc->len [i] = htole16(segs[i].ds_len); 1328 } 1329 } 1330 1331 static int 1332 rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, 1333 struct ieee80211_node *ni) 1334 { 1335 struct ieee80211vap *vap = ni->ni_vap; 1336 struct ieee80211com *ic = ni->ni_ic; 1337 struct ifnet *ifp = sc->sc_ifp; 1338 struct rt2661_tx_desc *desc; 1339 struct rt2661_tx_data *data; 1340 struct ieee80211_frame *wh; 1341 struct ieee80211_key *k; 1342 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1343 uint16_t dur; 1344 uint32_t flags = 0; /* XXX HWSEQ */ 1345 int nsegs, rate, error; 1346 1347 desc = &sc->mgtq.desc[sc->mgtq.cur]; 1348 data = &sc->mgtq.data[sc->mgtq.cur]; 1349 1350 rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; 1351 1352 wh = mtod(m0, struct ieee80211_frame *); 1353 1354 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1355 k = ieee80211_crypto_encap(ni, m0); 1356 if (k == NULL) { 1357 m_freem(m0); 1358 return ENOBUFS; 1359 } 1360 } 1361 1362 error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0, 1363 segs, &nsegs, 0); 1364 if (error != 0) { 1365 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1366 error); 1367 m_freem(m0); 1368 return error; 1369 } 1370 1371 if (bpf_peers_present(ifp->if_bpf)) { 1372 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1373 1374 tap->wt_flags = 0; 1375 tap->wt_rate = rate; 1376 1377 bpf_mtap2(ifp->if_bpf, tap, sc->sc_txtap_len, m0); 1378 } 1379 1380 data->m = m0; 1381 data->ni = ni; 1382 /* management frames are not taken into account for amrr */ 1383 data->rix = IEEE80211_FIXED_RATE_NONE; 1384 1385 wh = mtod(m0, struct ieee80211_frame *); 1386 1387 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1388 flags |= RT2661_TX_NEED_ACK; 1389 1390 dur = ieee80211_ack_duration(sc->sc_rates, 1391 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1392 *(uint16_t *)wh->i_dur = htole16(dur); 1393 1394 /* tell hardware to add timestamp in probe responses */ 1395 if ((wh->i_fc[0] & 1396 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 1397 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 1398 flags |= RT2661_TX_TIMESTAMP; 1399 } 1400 1401 rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, 1402 m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT); 1403 1404 bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1405 bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map, 1406 BUS_DMASYNC_PREWRITE); 1407 1408 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1409 m0->m_pkthdr.len, sc->mgtq.cur, rate); 1410 1411 /* kick mgt */ 1412 sc->mgtq.queued++; 1413 sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; 1414 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); 1415 1416 return 0; 1417 } 1418 1419 static int 1420 rt2661_sendprot(struct rt2661_softc *sc, int ac, 1421 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1422 { 1423 struct ieee80211com *ic = ni->ni_ic; 1424 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1425 const struct ieee80211_frame *wh; 1426 struct rt2661_tx_desc *desc; 1427 struct rt2661_tx_data *data; 1428 struct mbuf *mprot; 1429 int protrate, ackrate, pktlen, flags, isshort, error; 1430 uint16_t dur; 1431 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1432 int nsegs; 1433 1434 KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, 1435 ("protection %d", prot)); 1436 1437 wh = mtod(m, const struct ieee80211_frame *); 1438 pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; 1439 1440 protrate = ieee80211_ctl_rate(sc->sc_rates, rate); 1441 ackrate = ieee80211_ack_rate(sc->sc_rates, rate); 1442 1443 isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; 1444 dur = ieee80211_compute_duration(sc->sc_rates, pktlen, rate, isshort) 1445 + ieee80211_ack_duration(sc->sc_rates, rate, isshort); 1446 flags = RT2661_TX_MORE_FRAG; 1447 if (prot == IEEE80211_PROT_RTSCTS) { 1448 /* NB: CTS is the same size as an ACK */ 1449 dur += ieee80211_ack_duration(sc->sc_rates, rate, isshort); 1450 flags |= RT2661_TX_NEED_ACK; 1451 mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); 1452 } else { 1453 mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); 1454 } 1455 if (mprot == NULL) { 1456 /* XXX stat + msg */ 1457 return ENOBUFS; 1458 } 1459 1460 data = &txq->data[txq->cur]; 1461 desc = &txq->desc[txq->cur]; 1462 1463 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs, 1464 &nsegs, 0); 1465 if (error != 0) { 1466 device_printf(sc->sc_dev, 1467 "could not map mbuf (error %d)\n", error); 1468 m_freem(mprot); 1469 return error; 1470 } 1471 1472 data->m = mprot; 1473 data->ni = ieee80211_ref_node(ni); 1474 /* ctl frames are not taken into account for amrr */ 1475 data->rix = IEEE80211_FIXED_RATE_NONE; 1476 1477 rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len, 1478 protrate, segs, 1, ac); 1479 1480 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1481 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1482 1483 txq->queued++; 1484 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1485 1486 return 0; 1487 } 1488 1489 static int 1490 rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, 1491 struct ieee80211_node *ni, int ac) 1492 { 1493 struct ieee80211vap *vap = ni->ni_vap; 1494 struct ifnet *ifp = sc->sc_ifp; 1495 struct ieee80211com *ic = ifp->if_l2com; 1496 struct rt2661_tx_ring *txq = &sc->txq[ac]; 1497 struct rt2661_tx_desc *desc; 1498 struct rt2661_tx_data *data; 1499 struct ieee80211_frame *wh; 1500 const struct ieee80211_txparam *tp; 1501 struct ieee80211_key *k; 1502 const struct chanAccParams *cap; 1503 struct mbuf *mnew; 1504 bus_dma_segment_t segs[RT2661_MAX_SCATTER]; 1505 uint16_t dur; 1506 uint32_t flags; 1507 int error, nsegs, rate, noack = 0; 1508 1509 wh = mtod(m0, struct ieee80211_frame *); 1510 1511 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 1512 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1513 rate = tp->mcastrate; 1514 } else if (m0->m_flags & M_EAPOL) { 1515 rate = tp->mgmtrate; 1516 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1517 rate = tp->ucastrate; 1518 } else { 1519 (void) ieee80211_amrr_choose(ni, &RT2661_NODE(ni)->amrr); 1520 rate = ni->ni_txrate; 1521 } 1522 rate &= IEEE80211_RATE_VAL; 1523 1524 if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) { 1525 cap = &ic->ic_wme.wme_chanParams; 1526 noack = cap->cap_wmeParams[ac].wmep_noackPolicy; 1527 } 1528 1529 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1530 k = ieee80211_crypto_encap(ni, m0); 1531 if (k == NULL) { 1532 m_freem(m0); 1533 return ENOBUFS; 1534 } 1535 1536 /* packet header may have moved, reset our local pointer */ 1537 wh = mtod(m0, struct ieee80211_frame *); 1538 } 1539 1540 flags = 0; 1541 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1542 int prot = IEEE80211_PROT_NONE; 1543 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1544 prot = IEEE80211_PROT_RTSCTS; 1545 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1546 ieee80211_rate2phytype(sc->sc_rates, rate) == IEEE80211_T_OFDM) 1547 prot = ic->ic_protmode; 1548 if (prot != IEEE80211_PROT_NONE) { 1549 error = rt2661_sendprot(sc, ac, m0, ni, prot, rate); 1550 if (error) { 1551 m_freem(m0); 1552 return error; 1553 } 1554 flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS; 1555 } 1556 } 1557 1558 data = &txq->data[txq->cur]; 1559 desc = &txq->desc[txq->cur]; 1560 1561 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, 1562 &nsegs, 0); 1563 if (error != 0 && error != EFBIG) { 1564 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1565 error); 1566 m_freem(m0); 1567 return error; 1568 } 1569 if (error != 0) { 1570 mnew = m_defrag(m0, M_DONTWAIT); 1571 if (mnew == NULL) { 1572 device_printf(sc->sc_dev, 1573 "could not defragment mbuf\n"); 1574 m_freem(m0); 1575 return ENOBUFS; 1576 } 1577 m0 = mnew; 1578 1579 error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, 1580 segs, &nsegs, 0); 1581 if (error != 0) { 1582 device_printf(sc->sc_dev, 1583 "could not map mbuf (error %d)\n", error); 1584 m_freem(m0); 1585 return error; 1586 } 1587 1588 /* packet header have moved, reset our local pointer */ 1589 wh = mtod(m0, struct ieee80211_frame *); 1590 } 1591 1592 if (bpf_peers_present(ifp->if_bpf)) { 1593 struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; 1594 1595 tap->wt_flags = 0; 1596 tap->wt_rate = rate; 1597 tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq); 1598 tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags); 1599 1600 bpf_mtap2(ifp->if_bpf, tap, sc->sc_txtap_len, m0); 1601 } 1602 1603 data->m = m0; 1604 data->ni = ni; 1605 1606 /* remember link conditions for rate adaptation algorithm */ 1607 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1608 data->rix = ni->ni_txrate; 1609 /* XXX probably need last rssi value and not avg */ 1610 data->rssi = ic->ic_node_getrssi(ni); 1611 } else 1612 data->rix = IEEE80211_FIXED_RATE_NONE; 1613 1614 if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1615 flags |= RT2661_TX_NEED_ACK; 1616 1617 dur = ieee80211_ack_duration(sc->sc_rates, 1618 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1619 *(uint16_t *)wh->i_dur = htole16(dur); 1620 } 1621 1622 rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs, 1623 nsegs, ac); 1624 1625 bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1626 bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); 1627 1628 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1629 m0->m_pkthdr.len, txq->cur, rate); 1630 1631 /* kick Tx */ 1632 txq->queued++; 1633 txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; 1634 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac); 1635 1636 return 0; 1637 } 1638 1639 static void 1640 rt2661_start_locked(struct ifnet *ifp) 1641 { 1642 struct rt2661_softc *sc = ifp->if_softc; 1643 struct mbuf *m; 1644 struct ieee80211_node *ni; 1645 int ac; 1646 1647 RAL_LOCK_ASSERT(sc); 1648 1649 /* prevent management frames from being sent if we're not ready */ 1650 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING) || sc->sc_invalid) 1651 return; 1652 1653 for (;;) { 1654 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); 1655 if (m == NULL) 1656 break; 1657 1658 ac = M_WME_GETAC(m); 1659 if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) { 1660 /* there is no place left in this ring */ 1661 IFQ_DRV_PREPEND(&ifp->if_snd, m); 1662 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1663 break; 1664 } 1665 1666 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1667 m = ieee80211_encap(ni, m); 1668 if (m == NULL) { 1669 ieee80211_free_node(ni); 1670 ifp->if_oerrors++; 1671 continue; 1672 } 1673 1674 if (rt2661_tx_data(sc, m, ni, ac) != 0) { 1675 ieee80211_free_node(ni); 1676 ifp->if_oerrors++; 1677 break; 1678 } 1679 1680 sc->sc_tx_timer = 5; 1681 } 1682 } 1683 1684 static void 1685 rt2661_start(struct ifnet *ifp) 1686 { 1687 struct rt2661_softc *sc = ifp->if_softc; 1688 1689 RAL_LOCK(sc); 1690 rt2661_start_locked(ifp); 1691 RAL_UNLOCK(sc); 1692 } 1693 1694 static int 1695 rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 1696 const struct ieee80211_bpf_params *params) 1697 { 1698 struct ieee80211com *ic = ni->ni_ic; 1699 struct ifnet *ifp = ic->ic_ifp; 1700 struct rt2661_softc *sc = ifp->if_softc; 1701 1702 RAL_LOCK(sc); 1703 1704 /* prevent management frames from being sent if we're not ready */ 1705 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 1706 RAL_UNLOCK(sc); 1707 m_freem(m); 1708 ieee80211_free_node(ni); 1709 return ENETDOWN; 1710 } 1711 if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { 1712 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1713 RAL_UNLOCK(sc); 1714 m_freem(m); 1715 ieee80211_free_node(ni); 1716 return ENOBUFS; /* XXX */ 1717 } 1718 1719 ifp->if_opackets++; 1720 1721 /* 1722 * Legacy path; interpret frame contents to decide 1723 * precisely how to send the frame. 1724 * XXX raw path 1725 */ 1726 if (rt2661_tx_mgt(sc, m, ni) != 0) 1727 goto bad; 1728 sc->sc_tx_timer = 5; 1729 1730 RAL_UNLOCK(sc); 1731 1732 return 0; 1733 bad: 1734 ifp->if_oerrors++; 1735 ieee80211_free_node(ni); 1736 RAL_UNLOCK(sc); 1737 return EIO; /* XXX */ 1738 } 1739 1740 static void 1741 rt2661_watchdog(void *arg) 1742 { 1743 struct rt2661_softc *sc = (struct rt2661_softc *)arg; 1744 struct ifnet *ifp = sc->sc_ifp; 1745 1746 RAL_LOCK_ASSERT(sc); 1747 1748 KASSERT(ifp->if_drv_flags & IFF_DRV_RUNNING, ("not running")); 1749 1750 if (sc->sc_invalid) /* card ejected */ 1751 return; 1752 1753 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1754 if_printf(ifp, "device timeout\n"); 1755 rt2661_init_locked(sc); 1756 ifp->if_oerrors++; 1757 /* NB: callout is reset in rt2661_init() */ 1758 return; 1759 } 1760 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 1761 } 1762 1763 static int 1764 rt2661_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 1765 { 1766 struct rt2661_softc *sc = ifp->if_softc; 1767 struct ieee80211com *ic = ifp->if_l2com; 1768 struct ifreq *ifr = (struct ifreq *) data; 1769 int error = 0, startall = 0; 1770 1771 switch (cmd) { 1772 case SIOCSIFFLAGS: 1773 RAL_LOCK(sc); 1774 if (ifp->if_flags & IFF_UP) { 1775 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 1776 rt2661_init_locked(sc); 1777 startall = 1; 1778 } else 1779 rt2661_update_promisc(ifp); 1780 } else { 1781 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 1782 rt2661_stop_locked(sc); 1783 } 1784 RAL_UNLOCK(sc); 1785 if (startall) 1786 ieee80211_start_all(ic); 1787 break; 1788 case SIOCGIFMEDIA: 1789 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); 1790 break; 1791 case SIOCGIFADDR: 1792 error = ether_ioctl(ifp, cmd, data); 1793 break; 1794 default: 1795 error = EINVAL; 1796 break; 1797 } 1798 return error; 1799 } 1800 1801 static void 1802 rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) 1803 { 1804 uint32_t tmp; 1805 int ntries; 1806 1807 for (ntries = 0; ntries < 100; ntries++) { 1808 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1809 break; 1810 DELAY(1); 1811 } 1812 if (ntries == 100) { 1813 device_printf(sc->sc_dev, "could not write to BBP\n"); 1814 return; 1815 } 1816 1817 tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; 1818 RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); 1819 1820 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1821 } 1822 1823 static uint8_t 1824 rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) 1825 { 1826 uint32_t val; 1827 int ntries; 1828 1829 for (ntries = 0; ntries < 100; ntries++) { 1830 if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) 1831 break; 1832 DELAY(1); 1833 } 1834 if (ntries == 100) { 1835 device_printf(sc->sc_dev, "could not read from BBP\n"); 1836 return 0; 1837 } 1838 1839 val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; 1840 RAL_WRITE(sc, RT2661_PHY_CSR3, val); 1841 1842 for (ntries = 0; ntries < 100; ntries++) { 1843 val = RAL_READ(sc, RT2661_PHY_CSR3); 1844 if (!(val & RT2661_BBP_BUSY)) 1845 return val & 0xff; 1846 DELAY(1); 1847 } 1848 1849 device_printf(sc->sc_dev, "could not read from BBP\n"); 1850 return 0; 1851 } 1852 1853 static void 1854 rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) 1855 { 1856 uint32_t tmp; 1857 int ntries; 1858 1859 for (ntries = 0; ntries < 100; ntries++) { 1860 if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) 1861 break; 1862 DELAY(1); 1863 } 1864 if (ntries == 100) { 1865 device_printf(sc->sc_dev, "could not write to RF\n"); 1866 return; 1867 } 1868 1869 tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | 1870 (reg & 3); 1871 RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); 1872 1873 /* remember last written value in sc */ 1874 sc->rf_regs[reg] = val; 1875 1876 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff); 1877 } 1878 1879 static int 1880 rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) 1881 { 1882 if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) 1883 return EIO; /* there is already a command pending */ 1884 1885 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 1886 RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); 1887 1888 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); 1889 1890 return 0; 1891 } 1892 1893 static void 1894 rt2661_select_antenna(struct rt2661_softc *sc) 1895 { 1896 uint8_t bbp4, bbp77; 1897 uint32_t tmp; 1898 1899 bbp4 = rt2661_bbp_read(sc, 4); 1900 bbp77 = rt2661_bbp_read(sc, 77); 1901 1902 /* TBD */ 1903 1904 /* make sure Rx is disabled before switching antenna */ 1905 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 1906 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 1907 1908 rt2661_bbp_write(sc, 4, bbp4); 1909 rt2661_bbp_write(sc, 77, bbp77); 1910 1911 /* restore Rx filter */ 1912 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 1913 } 1914 1915 /* 1916 * Enable multi-rate retries for frames sent at OFDM rates. 1917 * In 802.11b/g mode, allow fallback to CCK rates. 1918 */ 1919 static void 1920 rt2661_enable_mrr(struct rt2661_softc *sc) 1921 { 1922 struct ifnet *ifp = sc->sc_ifp; 1923 struct ieee80211com *ic = ifp->if_l2com; 1924 uint32_t tmp; 1925 1926 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1927 1928 tmp &= ~RT2661_MRR_CCK_FALLBACK; 1929 if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) 1930 tmp |= RT2661_MRR_CCK_FALLBACK; 1931 tmp |= RT2661_MRR_ENABLED; 1932 1933 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1934 } 1935 1936 static void 1937 rt2661_set_txpreamble(struct rt2661_softc *sc) 1938 { 1939 struct ifnet *ifp = sc->sc_ifp; 1940 struct ieee80211com *ic = ifp->if_l2com; 1941 uint32_t tmp; 1942 1943 tmp = RAL_READ(sc, RT2661_TXRX_CSR4); 1944 1945 tmp &= ~RT2661_SHORT_PREAMBLE; 1946 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1947 tmp |= RT2661_SHORT_PREAMBLE; 1948 1949 RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); 1950 } 1951 1952 static void 1953 rt2661_set_basicrates(struct rt2661_softc *sc, 1954 const struct ieee80211_rateset *rs) 1955 { 1956 #define RV(r) ((r) & IEEE80211_RATE_VAL) 1957 struct ifnet *ifp = sc->sc_ifp; 1958 struct ieee80211com *ic = ifp->if_l2com; 1959 uint32_t mask = 0; 1960 uint8_t rate; 1961 int i, j; 1962 1963 for (i = 0; i < rs->rs_nrates; i++) { 1964 rate = rs->rs_rates[i]; 1965 1966 if (!(rate & IEEE80211_RATE_BASIC)) 1967 continue; 1968 1969 /* 1970 * Find h/w rate index. We know it exists because the rate 1971 * set has already been negotiated. 1972 */ 1973 for (j = 0; ic->ic_sup_rates[IEEE80211_MODE_11G].rs_rates[j] != RV(rate); j++); 1974 1975 mask |= 1 << j; 1976 } 1977 1978 RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); 1979 1980 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 1981 #undef RV 1982 } 1983 1984 /* 1985 * Reprogram MAC/BBP to switch to a new band. Values taken from the reference 1986 * driver. 1987 */ 1988 static void 1989 rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) 1990 { 1991 uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; 1992 uint32_t tmp; 1993 1994 /* update all BBP registers that depend on the band */ 1995 bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; 1996 bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; 1997 if (IEEE80211_IS_CHAN_5GHZ(c)) { 1998 bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; 1999 bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; 2000 } 2001 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 2002 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 2003 bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; 2004 } 2005 2006 rt2661_bbp_write(sc, 17, bbp17); 2007 rt2661_bbp_write(sc, 96, bbp96); 2008 rt2661_bbp_write(sc, 104, bbp104); 2009 2010 if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || 2011 (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { 2012 rt2661_bbp_write(sc, 75, 0x80); 2013 rt2661_bbp_write(sc, 86, 0x80); 2014 rt2661_bbp_write(sc, 88, 0x80); 2015 } 2016 2017 rt2661_bbp_write(sc, 35, bbp35); 2018 rt2661_bbp_write(sc, 97, bbp97); 2019 rt2661_bbp_write(sc, 98, bbp98); 2020 2021 tmp = RAL_READ(sc, RT2661_PHY_CSR0); 2022 tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); 2023 if (IEEE80211_IS_CHAN_2GHZ(c)) 2024 tmp |= RT2661_PA_PE_2GHZ; 2025 else 2026 tmp |= RT2661_PA_PE_5GHZ; 2027 RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); 2028 } 2029 2030 static void 2031 rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) 2032 { 2033 struct ifnet *ifp = sc->sc_ifp; 2034 struct ieee80211com *ic = ifp->if_l2com; 2035 const struct rfprog *rfprog; 2036 uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; 2037 int8_t power; 2038 u_int i, chan; 2039 2040 chan = ieee80211_chan2ieee(ic, c); 2041 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 2042 2043 sc->sc_rates = ieee80211_get_ratetable(c); 2044 2045 /* select the appropriate RF settings based on what EEPROM says */ 2046 rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; 2047 2048 /* find the settings for this channel (we know it exists) */ 2049 for (i = 0; rfprog[i].chan != chan; i++); 2050 2051 power = sc->txpow[i]; 2052 if (power < 0) { 2053 bbp94 += power; 2054 power = 0; 2055 } else if (power > 31) { 2056 bbp94 += power - 31; 2057 power = 31; 2058 } 2059 2060 /* 2061 * If we are switching from the 2GHz band to the 5GHz band or 2062 * vice-versa, BBP registers need to be reprogrammed. 2063 */ 2064 if (c->ic_flags != sc->sc_curchan->ic_flags) { 2065 rt2661_select_band(sc, c); 2066 rt2661_select_antenna(sc); 2067 } 2068 sc->sc_curchan = c; 2069 2070 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2071 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2072 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 2073 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2074 2075 DELAY(200); 2076 2077 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2078 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2079 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); 2080 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2081 2082 DELAY(200); 2083 2084 rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); 2085 rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); 2086 rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); 2087 rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); 2088 2089 /* enable smart mode for MIMO-capable RFs */ 2090 bbp3 = rt2661_bbp_read(sc, 3); 2091 2092 bbp3 &= ~RT2661_SMART_MODE; 2093 if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) 2094 bbp3 |= RT2661_SMART_MODE; 2095 2096 rt2661_bbp_write(sc, 3, bbp3); 2097 2098 if (bbp94 != RT2661_BBPR94_DEFAULT) 2099 rt2661_bbp_write(sc, 94, bbp94); 2100 2101 /* 5GHz radio needs a 1ms delay here */ 2102 if (IEEE80211_IS_CHAN_5GHZ(c)) 2103 DELAY(1000); 2104 } 2105 2106 static void 2107 rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) 2108 { 2109 uint32_t tmp; 2110 2111 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2112 RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); 2113 2114 tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; 2115 RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); 2116 } 2117 2118 static void 2119 rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) 2120 { 2121 uint32_t tmp; 2122 2123 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2124 RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); 2125 2126 tmp = addr[4] | addr[5] << 8; 2127 RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); 2128 } 2129 2130 static void 2131 rt2661_update_promisc(struct ifnet *ifp) 2132 { 2133 struct rt2661_softc *sc = ifp->if_softc; 2134 uint32_t tmp; 2135 2136 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2137 2138 tmp &= ~RT2661_DROP_NOT_TO_ME; 2139 if (!(ifp->if_flags & IFF_PROMISC)) 2140 tmp |= RT2661_DROP_NOT_TO_ME; 2141 2142 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2143 2144 DPRINTF(sc, "%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ? 2145 "entering" : "leaving"); 2146 } 2147 2148 /* 2149 * Update QoS (802.11e) settings for each h/w Tx ring. 2150 */ 2151 static int 2152 rt2661_wme_update(struct ieee80211com *ic) 2153 { 2154 struct rt2661_softc *sc = ic->ic_ifp->if_softc; 2155 const struct wmeParams *wmep; 2156 2157 wmep = ic->ic_wme.wme_chanParams.cap_wmeParams; 2158 2159 /* XXX: not sure about shifts. */ 2160 /* XXX: the reference driver plays with AC_VI settings too. */ 2161 2162 /* update TxOp */ 2163 RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, 2164 wmep[WME_AC_BE].wmep_txopLimit << 16 | 2165 wmep[WME_AC_BK].wmep_txopLimit); 2166 RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, 2167 wmep[WME_AC_VI].wmep_txopLimit << 16 | 2168 wmep[WME_AC_VO].wmep_txopLimit); 2169 2170 /* update CWmin */ 2171 RAL_WRITE(sc, RT2661_CWMIN_CSR, 2172 wmep[WME_AC_BE].wmep_logcwmin << 12 | 2173 wmep[WME_AC_BK].wmep_logcwmin << 8 | 2174 wmep[WME_AC_VI].wmep_logcwmin << 4 | 2175 wmep[WME_AC_VO].wmep_logcwmin); 2176 2177 /* update CWmax */ 2178 RAL_WRITE(sc, RT2661_CWMAX_CSR, 2179 wmep[WME_AC_BE].wmep_logcwmax << 12 | 2180 wmep[WME_AC_BK].wmep_logcwmax << 8 | 2181 wmep[WME_AC_VI].wmep_logcwmax << 4 | 2182 wmep[WME_AC_VO].wmep_logcwmax); 2183 2184 /* update Aifsn */ 2185 RAL_WRITE(sc, RT2661_AIFSN_CSR, 2186 wmep[WME_AC_BE].wmep_aifsn << 12 | 2187 wmep[WME_AC_BK].wmep_aifsn << 8 | 2188 wmep[WME_AC_VI].wmep_aifsn << 4 | 2189 wmep[WME_AC_VO].wmep_aifsn); 2190 2191 return 0; 2192 } 2193 2194 static void 2195 rt2661_update_slot(struct ifnet *ifp) 2196 { 2197 struct rt2661_softc *sc = ifp->if_softc; 2198 struct ieee80211com *ic = ifp->if_l2com; 2199 uint8_t slottime; 2200 uint32_t tmp; 2201 2202 slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 2203 2204 tmp = RAL_READ(sc, RT2661_MAC_CSR9); 2205 tmp = (tmp & ~0xff) | slottime; 2206 RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); 2207 } 2208 2209 static const char * 2210 rt2661_get_rf(int rev) 2211 { 2212 switch (rev) { 2213 case RT2661_RF_5225: return "RT5225"; 2214 case RT2661_RF_5325: return "RT5325 (MIMO XR)"; 2215 case RT2661_RF_2527: return "RT2527"; 2216 case RT2661_RF_2529: return "RT2529 (MIMO XR)"; 2217 default: return "unknown"; 2218 } 2219 } 2220 2221 static void 2222 rt2661_read_eeprom(struct rt2661_softc *sc, struct ieee80211com *ic) 2223 { 2224 uint16_t val; 2225 int i; 2226 2227 /* read MAC address */ 2228 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); 2229 ic->ic_myaddr[0] = val & 0xff; 2230 ic->ic_myaddr[1] = val >> 8; 2231 2232 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); 2233 ic->ic_myaddr[2] = val & 0xff; 2234 ic->ic_myaddr[3] = val >> 8; 2235 2236 val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); 2237 ic->ic_myaddr[4] = val & 0xff; 2238 ic->ic_myaddr[5] = val >> 8; 2239 2240 val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); 2241 /* XXX: test if different from 0xffff? */ 2242 sc->rf_rev = (val >> 11) & 0x1f; 2243 sc->hw_radio = (val >> 10) & 0x1; 2244 sc->rx_ant = (val >> 4) & 0x3; 2245 sc->tx_ant = (val >> 2) & 0x3; 2246 sc->nb_ant = val & 0x3; 2247 2248 DPRINTF(sc, "RF revision=%d\n", sc->rf_rev); 2249 2250 val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); 2251 sc->ext_5ghz_lna = (val >> 6) & 0x1; 2252 sc->ext_2ghz_lna = (val >> 4) & 0x1; 2253 2254 DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", 2255 sc->ext_2ghz_lna, sc->ext_5ghz_lna); 2256 2257 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); 2258 if ((val & 0xff) != 0xff) 2259 sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ 2260 2261 /* Only [-10, 10] is valid */ 2262 if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10) 2263 sc->rssi_2ghz_corr = 0; 2264 2265 val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); 2266 if ((val & 0xff) != 0xff) 2267 sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ 2268 2269 /* Only [-10, 10] is valid */ 2270 if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10) 2271 sc->rssi_5ghz_corr = 0; 2272 2273 /* adjust RSSI correction for external low-noise amplifier */ 2274 if (sc->ext_2ghz_lna) 2275 sc->rssi_2ghz_corr -= 14; 2276 if (sc->ext_5ghz_lna) 2277 sc->rssi_5ghz_corr -= 14; 2278 2279 DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", 2280 sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); 2281 2282 val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); 2283 if ((val >> 8) != 0xff) 2284 sc->rfprog = (val >> 8) & 0x3; 2285 if ((val & 0xff) != 0xff) 2286 sc->rffreq = val & 0xff; 2287 2288 DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq); 2289 2290 /* read Tx power for all a/b/g channels */ 2291 for (i = 0; i < 19; i++) { 2292 val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); 2293 sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ 2294 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2295 rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]); 2296 sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ 2297 DPRINTF(sc, "Channel=%d Tx power=%d\n", 2298 rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]); 2299 } 2300 2301 /* read vendor-specific BBP values */ 2302 for (i = 0; i < 16; i++) { 2303 val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); 2304 if (val == 0 || val == 0xffff) 2305 continue; /* skip invalid entries */ 2306 sc->bbp_prom[i].reg = val >> 8; 2307 sc->bbp_prom[i].val = val & 0xff; 2308 DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg, 2309 sc->bbp_prom[i].val); 2310 } 2311 } 2312 2313 static int 2314 rt2661_bbp_init(struct rt2661_softc *sc) 2315 { 2316 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2317 int i, ntries; 2318 uint8_t val; 2319 2320 /* wait for BBP to be ready */ 2321 for (ntries = 0; ntries < 100; ntries++) { 2322 val = rt2661_bbp_read(sc, 0); 2323 if (val != 0 && val != 0xff) 2324 break; 2325 DELAY(100); 2326 } 2327 if (ntries == 100) { 2328 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2329 return EIO; 2330 } 2331 2332 /* initialize BBP registers to default values */ 2333 for (i = 0; i < N(rt2661_def_bbp); i++) { 2334 rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, 2335 rt2661_def_bbp[i].val); 2336 } 2337 2338 /* write vendor-specific BBP values (from EEPROM) */ 2339 for (i = 0; i < 16; i++) { 2340 if (sc->bbp_prom[i].reg == 0) 2341 continue; 2342 rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2343 } 2344 2345 return 0; 2346 #undef N 2347 } 2348 2349 static void 2350 rt2661_init_locked(struct rt2661_softc *sc) 2351 { 2352 #define N(a) (sizeof (a) / sizeof ((a)[0])) 2353 struct ifnet *ifp = sc->sc_ifp; 2354 struct ieee80211com *ic = ifp->if_l2com; 2355 uint32_t tmp, sta[3]; 2356 int i, error, ntries; 2357 2358 RAL_LOCK_ASSERT(sc); 2359 2360 if ((sc->sc_flags & RAL_FW_LOADED) == 0) { 2361 error = rt2661_load_microcode(sc); 2362 if (error != 0) { 2363 if_printf(ifp, 2364 "%s: could not load 8051 microcode, error %d\n", 2365 __func__, error); 2366 return; 2367 } 2368 sc->sc_flags |= RAL_FW_LOADED; 2369 } 2370 2371 rt2661_stop_locked(sc); 2372 2373 /* initialize Tx rings */ 2374 RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); 2375 RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); 2376 RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); 2377 RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); 2378 2379 /* initialize Mgt ring */ 2380 RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); 2381 2382 /* initialize Rx ring */ 2383 RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); 2384 2385 /* initialize Tx rings sizes */ 2386 RAL_WRITE(sc, RT2661_TX_RING_CSR0, 2387 RT2661_TX_RING_COUNT << 24 | 2388 RT2661_TX_RING_COUNT << 16 | 2389 RT2661_TX_RING_COUNT << 8 | 2390 RT2661_TX_RING_COUNT); 2391 2392 RAL_WRITE(sc, RT2661_TX_RING_CSR1, 2393 RT2661_TX_DESC_WSIZE << 16 | 2394 RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ 2395 RT2661_MGT_RING_COUNT); 2396 2397 /* initialize Rx rings */ 2398 RAL_WRITE(sc, RT2661_RX_RING_CSR, 2399 RT2661_RX_DESC_BACK << 16 | 2400 RT2661_RX_DESC_WSIZE << 8 | 2401 RT2661_RX_RING_COUNT); 2402 2403 /* XXX: some magic here */ 2404 RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); 2405 2406 /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ 2407 RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); 2408 2409 /* load base address of Rx ring */ 2410 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); 2411 2412 /* initialize MAC registers to default values */ 2413 for (i = 0; i < N(rt2661_def_mac); i++) 2414 RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); 2415 2416 IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp)); 2417 rt2661_set_macaddr(sc, ic->ic_myaddr); 2418 2419 /* set host ready */ 2420 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2421 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2422 2423 /* wait for BBP/RF to wakeup */ 2424 for (ntries = 0; ntries < 1000; ntries++) { 2425 if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) 2426 break; 2427 DELAY(1000); 2428 } 2429 if (ntries == 1000) { 2430 printf("timeout waiting for BBP/RF to wakeup\n"); 2431 rt2661_stop_locked(sc); 2432 return; 2433 } 2434 2435 if (rt2661_bbp_init(sc) != 0) { 2436 rt2661_stop_locked(sc); 2437 return; 2438 } 2439 2440 /* select default channel */ 2441 sc->sc_curchan = ic->ic_curchan; 2442 rt2661_select_band(sc, sc->sc_curchan); 2443 rt2661_select_antenna(sc); 2444 rt2661_set_chan(sc, sc->sc_curchan); 2445 2446 /* update Rx filter */ 2447 tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; 2448 2449 tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; 2450 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2451 tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | 2452 RT2661_DROP_ACKCTS; 2453 if (ic->ic_opmode != IEEE80211_M_HOSTAP) 2454 tmp |= RT2661_DROP_TODS; 2455 if (!(ifp->if_flags & IFF_PROMISC)) 2456 tmp |= RT2661_DROP_NOT_TO_ME; 2457 } 2458 2459 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2460 2461 /* clear STA registers */ 2462 RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, N(sta)); 2463 2464 /* initialize ASIC */ 2465 RAL_WRITE(sc, RT2661_MAC_CSR1, 4); 2466 2467 /* clear any pending interrupt */ 2468 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2469 2470 /* enable interrupts */ 2471 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); 2472 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); 2473 2474 /* kick Rx */ 2475 RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); 2476 2477 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2478 ifp->if_drv_flags |= IFF_DRV_RUNNING; 2479 2480 callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); 2481 #undef N 2482 } 2483 2484 static void 2485 rt2661_init(void *priv) 2486 { 2487 struct rt2661_softc *sc = priv; 2488 struct ifnet *ifp = sc->sc_ifp; 2489 struct ieee80211com *ic = ifp->if_l2com; 2490 2491 RAL_LOCK(sc); 2492 rt2661_init_locked(sc); 2493 RAL_UNLOCK(sc); 2494 2495 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 2496 ieee80211_start_all(ic); /* start all vap's */ 2497 } 2498 2499 void 2500 rt2661_stop_locked(struct rt2661_softc *sc) 2501 { 2502 struct ifnet *ifp = sc->sc_ifp; 2503 uint32_t tmp; 2504 volatile int *flags = &sc->sc_flags; 2505 2506 while (*flags & RAL_INPUT_RUNNING) 2507 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2508 2509 callout_stop(&sc->watchdog_ch); 2510 sc->sc_tx_timer = 0; 2511 2512 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 2513 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 2514 2515 /* abort Tx (for all 5 Tx rings) */ 2516 RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); 2517 2518 /* disable Rx (value remains after reset!) */ 2519 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2520 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2521 2522 /* reset ASIC */ 2523 RAL_WRITE(sc, RT2661_MAC_CSR1, 3); 2524 RAL_WRITE(sc, RT2661_MAC_CSR1, 0); 2525 2526 /* disable interrupts */ 2527 RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff); 2528 RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); 2529 2530 /* clear any pending interrupt */ 2531 RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); 2532 RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); 2533 2534 /* reset Tx and Rx rings */ 2535 rt2661_reset_tx_ring(sc, &sc->txq[0]); 2536 rt2661_reset_tx_ring(sc, &sc->txq[1]); 2537 rt2661_reset_tx_ring(sc, &sc->txq[2]); 2538 rt2661_reset_tx_ring(sc, &sc->txq[3]); 2539 rt2661_reset_tx_ring(sc, &sc->mgtq); 2540 rt2661_reset_rx_ring(sc, &sc->rxq); 2541 } 2542 } 2543 2544 void 2545 rt2661_stop(void *priv) 2546 { 2547 struct rt2661_softc *sc = priv; 2548 2549 RAL_LOCK(sc); 2550 rt2661_stop_locked(sc); 2551 RAL_UNLOCK(sc); 2552 } 2553 2554 static int 2555 rt2661_load_microcode(struct rt2661_softc *sc) 2556 { 2557 struct ifnet *ifp = sc->sc_ifp; 2558 const struct firmware *fp; 2559 const char *imagename; 2560 int ntries, error; 2561 2562 RAL_LOCK_ASSERT(sc); 2563 2564 switch (sc->sc_id) { 2565 case 0x0301: imagename = "rt2561sfw"; break; 2566 case 0x0302: imagename = "rt2561fw"; break; 2567 case 0x0401: imagename = "rt2661fw"; break; 2568 default: 2569 if_printf(ifp, "%s: unexpected pci device id 0x%x, " 2570 "don't know how to retrieve firmware\n", 2571 __func__, sc->sc_id); 2572 return EINVAL; 2573 } 2574 RAL_UNLOCK(sc); 2575 fp = firmware_get(imagename); 2576 RAL_LOCK(sc); 2577 if (fp == NULL) { 2578 if_printf(ifp, "%s: unable to retrieve firmware image %s\n", 2579 __func__, imagename); 2580 return EINVAL; 2581 } 2582 2583 /* 2584 * Load 8051 microcode into NIC. 2585 */ 2586 /* reset 8051 */ 2587 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2588 2589 /* cancel any pending Host to MCU command */ 2590 RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); 2591 RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); 2592 RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); 2593 2594 /* write 8051's microcode */ 2595 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); 2596 RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize); 2597 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); 2598 2599 /* kick 8051's ass */ 2600 RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); 2601 2602 /* wait for 8051 to initialize */ 2603 for (ntries = 0; ntries < 500; ntries++) { 2604 if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) 2605 break; 2606 DELAY(100); 2607 } 2608 if (ntries == 500) { 2609 if_printf(ifp, "%s: timeout waiting for MCU to initialize\n", 2610 __func__); 2611 error = EIO; 2612 } else 2613 error = 0; 2614 2615 firmware_put(fp, FIRMWARE_UNLOAD); 2616 return error; 2617 } 2618 2619 #ifdef notyet 2620 /* 2621 * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and 2622 * false CCA count. This function is called periodically (every seconds) when 2623 * in the RUN state. Values taken from the reference driver. 2624 */ 2625 static void 2626 rt2661_rx_tune(struct rt2661_softc *sc) 2627 { 2628 uint8_t bbp17; 2629 uint16_t cca; 2630 int lo, hi, dbm; 2631 2632 /* 2633 * Tuning range depends on operating band and on the presence of an 2634 * external low-noise amplifier. 2635 */ 2636 lo = 0x20; 2637 if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) 2638 lo += 0x08; 2639 if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || 2640 (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) 2641 lo += 0x10; 2642 hi = lo + 0x20; 2643 2644 /* retrieve false CCA count since last call (clear on read) */ 2645 cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; 2646 2647 if (dbm >= -35) { 2648 bbp17 = 0x60; 2649 } else if (dbm >= -58) { 2650 bbp17 = hi; 2651 } else if (dbm >= -66) { 2652 bbp17 = lo + 0x10; 2653 } else if (dbm >= -74) { 2654 bbp17 = lo + 0x08; 2655 } else { 2656 /* RSSI < -74dBm, tune using false CCA count */ 2657 2658 bbp17 = sc->bbp17; /* current value */ 2659 2660 hi -= 2 * (-74 - dbm); 2661 if (hi < lo) 2662 hi = lo; 2663 2664 if (bbp17 > hi) { 2665 bbp17 = hi; 2666 2667 } else if (cca > 512) { 2668 if (++bbp17 > hi) 2669 bbp17 = hi; 2670 } else if (cca < 100) { 2671 if (--bbp17 < lo) 2672 bbp17 = lo; 2673 } 2674 } 2675 2676 if (bbp17 != sc->bbp17) { 2677 rt2661_bbp_write(sc, 17, bbp17); 2678 sc->bbp17 = bbp17; 2679 } 2680 } 2681 2682 /* 2683 * Enter/Leave radar detection mode. 2684 * This is for 802.11h additional regulatory domains. 2685 */ 2686 static void 2687 rt2661_radar_start(struct rt2661_softc *sc) 2688 { 2689 uint32_t tmp; 2690 2691 /* disable Rx */ 2692 tmp = RAL_READ(sc, RT2661_TXRX_CSR0); 2693 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); 2694 2695 rt2661_bbp_write(sc, 82, 0x20); 2696 rt2661_bbp_write(sc, 83, 0x00); 2697 rt2661_bbp_write(sc, 84, 0x40); 2698 2699 /* save current BBP registers values */ 2700 sc->bbp18 = rt2661_bbp_read(sc, 18); 2701 sc->bbp21 = rt2661_bbp_read(sc, 21); 2702 sc->bbp22 = rt2661_bbp_read(sc, 22); 2703 sc->bbp16 = rt2661_bbp_read(sc, 16); 2704 sc->bbp17 = rt2661_bbp_read(sc, 17); 2705 sc->bbp64 = rt2661_bbp_read(sc, 64); 2706 2707 rt2661_bbp_write(sc, 18, 0xff); 2708 rt2661_bbp_write(sc, 21, 0x3f); 2709 rt2661_bbp_write(sc, 22, 0x3f); 2710 rt2661_bbp_write(sc, 16, 0xbd); 2711 rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); 2712 rt2661_bbp_write(sc, 64, 0x21); 2713 2714 /* restore Rx filter */ 2715 RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); 2716 } 2717 2718 static int 2719 rt2661_radar_stop(struct rt2661_softc *sc) 2720 { 2721 uint8_t bbp66; 2722 2723 /* read radar detection result */ 2724 bbp66 = rt2661_bbp_read(sc, 66); 2725 2726 /* restore BBP registers values */ 2727 rt2661_bbp_write(sc, 16, sc->bbp16); 2728 rt2661_bbp_write(sc, 17, sc->bbp17); 2729 rt2661_bbp_write(sc, 18, sc->bbp18); 2730 rt2661_bbp_write(sc, 21, sc->bbp21); 2731 rt2661_bbp_write(sc, 22, sc->bbp22); 2732 rt2661_bbp_write(sc, 64, sc->bbp64); 2733 2734 return bbp66 == 1; 2735 } 2736 #endif 2737 2738 static int 2739 rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap) 2740 { 2741 struct ieee80211com *ic = vap->iv_ic; 2742 struct ieee80211_beacon_offsets bo; 2743 struct rt2661_tx_desc desc; 2744 struct mbuf *m0; 2745 int rate; 2746 2747 m0 = ieee80211_beacon_alloc(vap->iv_bss, &bo); 2748 if (m0 == NULL) { 2749 device_printf(sc->sc_dev, "could not allocate beacon frame\n"); 2750 return ENOBUFS; 2751 } 2752 2753 /* send beacons at the lowest available rate */ 2754 rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2; 2755 2756 rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, 2757 m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); 2758 2759 /* copy the first 24 bytes of Tx descriptor into NIC memory */ 2760 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); 2761 2762 /* copy beacon header and payload into NIC memory */ 2763 RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, 2764 mtod(m0, uint8_t *), m0->m_pkthdr.len); 2765 2766 m_freem(m0); 2767 2768 return 0; 2769 } 2770 2771 /* 2772 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS 2773 * and HostAP operating modes. 2774 */ 2775 static void 2776 rt2661_enable_tsf_sync(struct rt2661_softc *sc) 2777 { 2778 struct ifnet *ifp = sc->sc_ifp; 2779 struct ieee80211com *ic = ifp->if_l2com; 2780 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2781 uint32_t tmp; 2782 2783 if (vap->iv_opmode != IEEE80211_M_STA) { 2784 /* 2785 * Change default 16ms TBTT adjustment to 8ms. 2786 * Must be done before enabling beacon generation. 2787 */ 2788 RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); 2789 } 2790 2791 tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; 2792 2793 /* set beacon interval (in 1/16ms unit) */ 2794 tmp |= vap->iv_bss->ni_intval * 16; 2795 2796 tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; 2797 if (vap->iv_opmode == IEEE80211_M_STA) 2798 tmp |= RT2661_TSF_MODE(1); 2799 else 2800 tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; 2801 2802 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); 2803 } 2804 2805 /* 2806 * Retrieve the "Received Signal Strength Indicator" from the raw values 2807 * contained in Rx descriptors. The computation depends on which band the 2808 * frame was received. Correction values taken from the reference driver. 2809 */ 2810 static int 2811 rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) 2812 { 2813 int lna, agc, rssi; 2814 2815 lna = (raw >> 5) & 0x3; 2816 agc = raw & 0x1f; 2817 2818 if (lna == 0) { 2819 /* 2820 * No mapping available. 2821 * 2822 * NB: Since RSSI is relative to noise floor, -1 is 2823 * adequate for caller to know error happened. 2824 */ 2825 return -1; 2826 } 2827 2828 rssi = (2 * agc) - RT2661_NOISE_FLOOR; 2829 2830 if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { 2831 rssi += sc->rssi_2ghz_corr; 2832 2833 if (lna == 1) 2834 rssi -= 64; 2835 else if (lna == 2) 2836 rssi -= 74; 2837 else if (lna == 3) 2838 rssi -= 90; 2839 } else { 2840 rssi += sc->rssi_5ghz_corr; 2841 2842 if (lna == 1) 2843 rssi -= 64; 2844 else if (lna == 2) 2845 rssi -= 86; 2846 else if (lna == 3) 2847 rssi -= 100; 2848 } 2849 return rssi; 2850 } 2851 2852 static void 2853 rt2661_scan_start(struct ieee80211com *ic) 2854 { 2855 struct ifnet *ifp = ic->ic_ifp; 2856 struct rt2661_softc *sc = ifp->if_softc; 2857 uint32_t tmp; 2858 2859 /* abort TSF synchronization */ 2860 tmp = RAL_READ(sc, RT2661_TXRX_CSR9); 2861 RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff); 2862 rt2661_set_bssid(sc, ifp->if_broadcastaddr); 2863 } 2864 2865 static void 2866 rt2661_scan_end(struct ieee80211com *ic) 2867 { 2868 struct ifnet *ifp = ic->ic_ifp; 2869 struct rt2661_softc *sc = ifp->if_softc; 2870 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2871 2872 rt2661_enable_tsf_sync(sc); 2873 /* XXX keep local copy */ 2874 rt2661_set_bssid(sc, vap->iv_bss->ni_bssid); 2875 } 2876 2877 static void 2878 rt2661_set_channel(struct ieee80211com *ic) 2879 { 2880 struct ifnet *ifp = ic->ic_ifp; 2881 struct rt2661_softc *sc = ifp->if_softc; 2882 2883 RAL_LOCK(sc); 2884 rt2661_set_chan(sc, ic->ic_curchan); 2885 2886 sc->sc_txtap.wt_chan_freq = htole16(ic->ic_curchan->ic_freq); 2887 sc->sc_txtap.wt_chan_flags = htole16(ic->ic_curchan->ic_flags); 2888 sc->sc_rxtap.wr_chan_freq = htole16(ic->ic_curchan->ic_freq); 2889 sc->sc_rxtap.wr_chan_flags = htole16(ic->ic_curchan->ic_flags); 2890 RAL_UNLOCK(sc); 2891 2892 } 2893