1 2 /*- 3 * Copyright (c) 2005, 2006 4 * Damien Bergamini <damien.bergamini@free.fr> 5 * 6 * Permission to use, copy, modify, and distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #include <sys/cdefs.h> 20 /*- 21 * Ralink Technology RT2560 chipset driver 22 * http://www.ralinktech.com/ 23 */ 24 25 #include <sys/param.h> 26 #include <sys/sysctl.h> 27 #include <sys/sockio.h> 28 #include <sys/mbuf.h> 29 #include <sys/kernel.h> 30 #include <sys/socket.h> 31 #include <sys/systm.h> 32 #include <sys/malloc.h> 33 #include <sys/lock.h> 34 #include <sys/mutex.h> 35 #include <sys/module.h> 36 #include <sys/bus.h> 37 #include <sys/endian.h> 38 39 #include <machine/bus.h> 40 #include <machine/resource.h> 41 #include <sys/rman.h> 42 43 #include <net/bpf.h> 44 #include <net/if.h> 45 #include <net/if_var.h> 46 #include <net/if_arp.h> 47 #include <net/ethernet.h> 48 #include <net/if_dl.h> 49 #include <net/if_media.h> 50 #include <net/if_types.h> 51 52 #include <net80211/ieee80211_var.h> 53 #include <net80211/ieee80211_radiotap.h> 54 #include <net80211/ieee80211_regdomain.h> 55 #include <net80211/ieee80211_ratectl.h> 56 57 #include <netinet/in.h> 58 #include <netinet/in_systm.h> 59 #include <netinet/in_var.h> 60 #include <netinet/ip.h> 61 #include <netinet/if_ether.h> 62 63 #include <dev/ral/rt2560reg.h> 64 #include <dev/ral/rt2560var.h> 65 66 #define RT2560_RSSI(sc, rssi) \ 67 ((rssi) > (RT2560_NOISE_FLOOR + (sc)->rssi_corr) ? \ 68 ((rssi) - RT2560_NOISE_FLOOR - (sc)->rssi_corr) : 0) 69 70 #define RAL_DEBUG 71 #ifdef RAL_DEBUG 72 #define DPRINTF(sc, fmt, ...) do { \ 73 if (sc->sc_debug > 0) \ 74 printf(fmt, __VA_ARGS__); \ 75 } while (0) 76 #define DPRINTFN(sc, n, fmt, ...) do { \ 77 if (sc->sc_debug >= (n)) \ 78 printf(fmt, __VA_ARGS__); \ 79 } while (0) 80 #else 81 #define DPRINTF(sc, fmt, ...) 82 #define DPRINTFN(sc, n, fmt, ...) 83 #endif 84 85 static struct ieee80211vap *rt2560_vap_create(struct ieee80211com *, 86 const char [IFNAMSIZ], int, enum ieee80211_opmode, 87 int, const uint8_t [IEEE80211_ADDR_LEN], 88 const uint8_t [IEEE80211_ADDR_LEN]); 89 static void rt2560_vap_delete(struct ieee80211vap *); 90 static void rt2560_dma_map_addr(void *, bus_dma_segment_t *, int, 91 int); 92 static int rt2560_alloc_tx_ring(struct rt2560_softc *, 93 struct rt2560_tx_ring *, int); 94 static void rt2560_reset_tx_ring(struct rt2560_softc *, 95 struct rt2560_tx_ring *); 96 static void rt2560_free_tx_ring(struct rt2560_softc *, 97 struct rt2560_tx_ring *); 98 static int rt2560_alloc_rx_ring(struct rt2560_softc *, 99 struct rt2560_rx_ring *, int); 100 static void rt2560_reset_rx_ring(struct rt2560_softc *, 101 struct rt2560_rx_ring *); 102 static void rt2560_free_rx_ring(struct rt2560_softc *, 103 struct rt2560_rx_ring *); 104 static int rt2560_newstate(struct ieee80211vap *, 105 enum ieee80211_state, int); 106 static uint16_t rt2560_eeprom_read(struct rt2560_softc *, uint8_t); 107 static void rt2560_encryption_intr(struct rt2560_softc *); 108 static void rt2560_tx_intr(struct rt2560_softc *); 109 static void rt2560_prio_intr(struct rt2560_softc *); 110 static void rt2560_decryption_intr(struct rt2560_softc *); 111 static void rt2560_rx_intr(struct rt2560_softc *); 112 static void rt2560_beacon_update(struct ieee80211vap *, int item); 113 static void rt2560_beacon_expire(struct rt2560_softc *); 114 static void rt2560_wakeup_expire(struct rt2560_softc *); 115 static void rt2560_scan_start(struct ieee80211com *); 116 static void rt2560_scan_end(struct ieee80211com *); 117 static void rt2560_getradiocaps(struct ieee80211com *, int, int *, 118 struct ieee80211_channel[]); 119 static void rt2560_set_channel(struct ieee80211com *); 120 static void rt2560_setup_tx_desc(struct rt2560_softc *, 121 struct rt2560_tx_desc *, uint32_t, int, int, int, 122 bus_addr_t); 123 static int rt2560_tx_bcn(struct rt2560_softc *, struct mbuf *, 124 struct ieee80211_node *); 125 static int rt2560_tx_mgt(struct rt2560_softc *, struct mbuf *, 126 struct ieee80211_node *); 127 static int rt2560_tx_data(struct rt2560_softc *, struct mbuf *, 128 struct ieee80211_node *); 129 static int rt2560_transmit(struct ieee80211com *, struct mbuf *); 130 static void rt2560_start(struct rt2560_softc *); 131 static void rt2560_watchdog(void *); 132 static void rt2560_parent(struct ieee80211com *); 133 static void rt2560_bbp_write(struct rt2560_softc *, uint8_t, 134 uint8_t); 135 static uint8_t rt2560_bbp_read(struct rt2560_softc *, uint8_t); 136 static void rt2560_rf_write(struct rt2560_softc *, uint8_t, 137 uint32_t); 138 static void rt2560_set_chan(struct rt2560_softc *, 139 struct ieee80211_channel *); 140 #if 0 141 static void rt2560_disable_rf_tune(struct rt2560_softc *); 142 #endif 143 static void rt2560_enable_tsf_sync(struct rt2560_softc *); 144 static void rt2560_enable_tsf(struct rt2560_softc *); 145 static void rt2560_update_plcp(struct rt2560_softc *); 146 static void rt2560_update_slot(struct ieee80211com *); 147 static void rt2560_set_basicrates(struct rt2560_softc *, 148 const struct ieee80211_rateset *); 149 static void rt2560_update_led(struct rt2560_softc *, int, int); 150 static void rt2560_set_bssid(struct rt2560_softc *, const uint8_t *); 151 static void rt2560_set_macaddr(struct rt2560_softc *, 152 const uint8_t *); 153 static void rt2560_get_macaddr(struct rt2560_softc *, uint8_t *); 154 static void rt2560_update_promisc(struct ieee80211com *); 155 static const char *rt2560_get_rf(int); 156 static void rt2560_read_config(struct rt2560_softc *); 157 static int rt2560_bbp_init(struct rt2560_softc *); 158 static void rt2560_set_txantenna(struct rt2560_softc *, int); 159 static void rt2560_set_rxantenna(struct rt2560_softc *, int); 160 static void rt2560_init_locked(struct rt2560_softc *); 161 static void rt2560_init(void *); 162 static void rt2560_stop_locked(struct rt2560_softc *); 163 static int rt2560_raw_xmit(struct ieee80211_node *, struct mbuf *, 164 const struct ieee80211_bpf_params *); 165 166 static const struct { 167 uint32_t reg; 168 uint32_t val; 169 } rt2560_def_mac[] = { 170 RT2560_DEF_MAC 171 }; 172 173 static const struct { 174 uint8_t reg; 175 uint8_t val; 176 } rt2560_def_bbp[] = { 177 RT2560_DEF_BBP 178 }; 179 180 static const uint32_t rt2560_rf2522_r2[] = RT2560_RF2522_R2; 181 static const uint32_t rt2560_rf2523_r2[] = RT2560_RF2523_R2; 182 static const uint32_t rt2560_rf2524_r2[] = RT2560_RF2524_R2; 183 static const uint32_t rt2560_rf2525_r2[] = RT2560_RF2525_R2; 184 static const uint32_t rt2560_rf2525_hi_r2[] = RT2560_RF2525_HI_R2; 185 static const uint32_t rt2560_rf2525e_r2[] = RT2560_RF2525E_R2; 186 static const uint32_t rt2560_rf2526_r2[] = RT2560_RF2526_R2; 187 static const uint32_t rt2560_rf2526_hi_r2[] = RT2560_RF2526_HI_R2; 188 189 static const uint8_t rt2560_chan_5ghz[] = 190 { 36, 40, 44, 48, 52, 56, 60, 64, 191 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 192 149, 153, 157, 161 }; 193 194 static const struct { 195 uint8_t chan; 196 uint32_t r1, r2, r4; 197 } rt2560_rf5222[] = { 198 RT2560_RF5222 199 }; 200 201 int 202 rt2560_attach(device_t dev, int id) 203 { 204 struct rt2560_softc *sc = device_get_softc(dev); 205 struct ieee80211com *ic = &sc->sc_ic; 206 int error; 207 208 sc->sc_dev = dev; 209 210 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 211 MTX_DEF | MTX_RECURSE); 212 213 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 214 mbufq_init(&sc->sc_snd, ifqmaxlen); 215 216 /* retrieve RT2560 rev. no */ 217 sc->asic_rev = RAL_READ(sc, RT2560_CSR0); 218 219 /* retrieve RF rev. no and various other things from EEPROM */ 220 rt2560_read_config(sc); 221 222 device_printf(dev, "MAC/BBP RT2560 (rev 0x%02x), RF %s\n", 223 sc->asic_rev, rt2560_get_rf(sc->rf_rev)); 224 225 /* 226 * Allocate Tx and Rx rings. 227 */ 228 error = rt2560_alloc_tx_ring(sc, &sc->txq, RT2560_TX_RING_COUNT); 229 if (error != 0) { 230 device_printf(sc->sc_dev, "could not allocate Tx ring\n"); 231 goto fail1; 232 } 233 234 error = rt2560_alloc_tx_ring(sc, &sc->atimq, RT2560_ATIM_RING_COUNT); 235 if (error != 0) { 236 device_printf(sc->sc_dev, "could not allocate ATIM ring\n"); 237 goto fail2; 238 } 239 240 error = rt2560_alloc_tx_ring(sc, &sc->prioq, RT2560_PRIO_RING_COUNT); 241 if (error != 0) { 242 device_printf(sc->sc_dev, "could not allocate Prio ring\n"); 243 goto fail3; 244 } 245 246 error = rt2560_alloc_tx_ring(sc, &sc->bcnq, RT2560_BEACON_RING_COUNT); 247 if (error != 0) { 248 device_printf(sc->sc_dev, "could not allocate Beacon ring\n"); 249 goto fail4; 250 } 251 252 error = rt2560_alloc_rx_ring(sc, &sc->rxq, RT2560_RX_RING_COUNT); 253 if (error != 0) { 254 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 255 goto fail5; 256 } 257 258 /* retrieve MAC address */ 259 rt2560_get_macaddr(sc, ic->ic_macaddr); 260 261 ic->ic_softc = sc; 262 ic->ic_name = device_get_nameunit(dev); 263 ic->ic_opmode = IEEE80211_M_STA; 264 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 265 266 /* set device capabilities */ 267 ic->ic_caps = 268 IEEE80211_C_STA /* station mode */ 269 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 270 | IEEE80211_C_HOSTAP /* hostap mode */ 271 | IEEE80211_C_MONITOR /* monitor mode */ 272 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 273 | IEEE80211_C_WDS /* 4-address traffic works */ 274 | IEEE80211_C_MBSS /* mesh point link mode */ 275 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 276 | IEEE80211_C_SHSLOT /* short slot time supported */ 277 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 278 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 279 #ifdef notyet 280 | IEEE80211_C_TXFRAG /* handle tx frags */ 281 #endif 282 ; 283 284 rt2560_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 285 ic->ic_channels); 286 287 ieee80211_ifattach(ic); 288 ic->ic_raw_xmit = rt2560_raw_xmit; 289 ic->ic_updateslot = rt2560_update_slot; 290 ic->ic_update_promisc = rt2560_update_promisc; 291 ic->ic_scan_start = rt2560_scan_start; 292 ic->ic_scan_end = rt2560_scan_end; 293 ic->ic_getradiocaps = rt2560_getradiocaps; 294 ic->ic_set_channel = rt2560_set_channel; 295 296 ic->ic_vap_create = rt2560_vap_create; 297 ic->ic_vap_delete = rt2560_vap_delete; 298 ic->ic_parent = rt2560_parent; 299 ic->ic_transmit = rt2560_transmit; 300 301 ieee80211_radiotap_attach(ic, 302 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 303 RT2560_TX_RADIOTAP_PRESENT, 304 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 305 RT2560_RX_RADIOTAP_PRESENT); 306 307 /* 308 * Add a few sysctl knobs. 309 */ 310 #ifdef RAL_DEBUG 311 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 312 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 313 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 314 #endif 315 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 316 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 317 "txantenna", CTLFLAG_RW, &sc->tx_ant, 0, "tx antenna (0=auto)"); 318 319 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 320 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 321 "rxantenna", CTLFLAG_RW, &sc->rx_ant, 0, "rx antenna (0=auto)"); 322 323 if (bootverbose) 324 ieee80211_announce(ic); 325 326 return 0; 327 328 fail5: rt2560_free_tx_ring(sc, &sc->bcnq); 329 fail4: rt2560_free_tx_ring(sc, &sc->prioq); 330 fail3: rt2560_free_tx_ring(sc, &sc->atimq); 331 fail2: rt2560_free_tx_ring(sc, &sc->txq); 332 fail1: mtx_destroy(&sc->sc_mtx); 333 334 return ENXIO; 335 } 336 337 int 338 rt2560_detach(void *xsc) 339 { 340 struct rt2560_softc *sc = xsc; 341 struct ieee80211com *ic = &sc->sc_ic; 342 343 rt2560_stop(sc); 344 345 ieee80211_ifdetach(ic); 346 mbufq_drain(&sc->sc_snd); 347 348 rt2560_free_tx_ring(sc, &sc->txq); 349 rt2560_free_tx_ring(sc, &sc->atimq); 350 rt2560_free_tx_ring(sc, &sc->prioq); 351 rt2560_free_tx_ring(sc, &sc->bcnq); 352 rt2560_free_rx_ring(sc, &sc->rxq); 353 354 mtx_destroy(&sc->sc_mtx); 355 356 return 0; 357 } 358 359 static struct ieee80211vap * 360 rt2560_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 361 enum ieee80211_opmode opmode, int flags, 362 const uint8_t bssid[IEEE80211_ADDR_LEN], 363 const uint8_t mac[IEEE80211_ADDR_LEN]) 364 { 365 struct rt2560_softc *sc = ic->ic_softc; 366 struct rt2560_vap *rvp; 367 struct ieee80211vap *vap; 368 369 switch (opmode) { 370 case IEEE80211_M_STA: 371 case IEEE80211_M_IBSS: 372 case IEEE80211_M_AHDEMO: 373 case IEEE80211_M_MONITOR: 374 case IEEE80211_M_HOSTAP: 375 case IEEE80211_M_MBSS: 376 /* XXXRP: TBD */ 377 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 378 device_printf(sc->sc_dev, "only 1 vap supported\n"); 379 return NULL; 380 } 381 if (opmode == IEEE80211_M_STA) 382 flags |= IEEE80211_CLONE_NOBEACONS; 383 break; 384 case IEEE80211_M_WDS: 385 if (TAILQ_EMPTY(&ic->ic_vaps) || 386 ic->ic_opmode != IEEE80211_M_HOSTAP) { 387 device_printf(sc->sc_dev, 388 "wds only supported in ap mode\n"); 389 return NULL; 390 } 391 /* 392 * Silently remove any request for a unique 393 * bssid; WDS vap's always share the local 394 * mac address. 395 */ 396 flags &= ~IEEE80211_CLONE_BSSID; 397 break; 398 default: 399 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 400 return NULL; 401 } 402 rvp = malloc(sizeof(struct rt2560_vap), M_80211_VAP, M_WAITOK | M_ZERO); 403 vap = &rvp->ral_vap; 404 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 405 406 /* override state transition machine */ 407 rvp->ral_newstate = vap->iv_newstate; 408 vap->iv_newstate = rt2560_newstate; 409 vap->iv_update_beacon = rt2560_beacon_update; 410 411 ieee80211_ratectl_init(vap); 412 /* complete setup */ 413 ieee80211_vap_attach(vap, ieee80211_media_change, 414 ieee80211_media_status, mac); 415 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 416 ic->ic_opmode = opmode; 417 return vap; 418 } 419 420 static void 421 rt2560_vap_delete(struct ieee80211vap *vap) 422 { 423 struct rt2560_vap *rvp = RT2560_VAP(vap); 424 425 ieee80211_ratectl_deinit(vap); 426 ieee80211_vap_detach(vap); 427 free(rvp, M_80211_VAP); 428 } 429 430 void 431 rt2560_resume(void *xsc) 432 { 433 struct rt2560_softc *sc = xsc; 434 435 if (sc->sc_ic.ic_nrunning > 0) 436 rt2560_init(sc); 437 } 438 439 static void 440 rt2560_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 441 { 442 if (error != 0) 443 return; 444 445 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 446 447 *(bus_addr_t *)arg = segs[0].ds_addr; 448 } 449 450 static int 451 rt2560_alloc_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring, 452 int count) 453 { 454 int i, error; 455 456 ring->count = count; 457 ring->queued = 0; 458 ring->cur = ring->next = 0; 459 ring->cur_encrypt = ring->next_encrypt = 0; 460 461 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 462 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 463 count * RT2560_TX_DESC_SIZE, 1, count * RT2560_TX_DESC_SIZE, 464 0, NULL, NULL, &ring->desc_dmat); 465 if (error != 0) { 466 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 467 goto fail; 468 } 469 470 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 471 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 472 if (error != 0) { 473 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 474 goto fail; 475 } 476 477 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 478 count * RT2560_TX_DESC_SIZE, rt2560_dma_map_addr, &ring->physaddr, 479 0); 480 if (error != 0) { 481 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 482 goto fail; 483 } 484 485 ring->data = malloc(count * sizeof (struct rt2560_tx_data), M_DEVBUF, 486 M_NOWAIT | M_ZERO); 487 if (ring->data == NULL) { 488 device_printf(sc->sc_dev, "could not allocate soft data\n"); 489 error = ENOMEM; 490 goto fail; 491 } 492 493 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 494 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 495 MCLBYTES, RT2560_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, 496 &ring->data_dmat); 497 if (error != 0) { 498 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 499 goto fail; 500 } 501 502 for (i = 0; i < count; i++) { 503 error = bus_dmamap_create(ring->data_dmat, 0, 504 &ring->data[i].map); 505 if (error != 0) { 506 device_printf(sc->sc_dev, "could not create DMA map\n"); 507 goto fail; 508 } 509 } 510 511 return 0; 512 513 fail: rt2560_free_tx_ring(sc, ring); 514 return error; 515 } 516 517 static void 518 rt2560_reset_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring) 519 { 520 struct rt2560_tx_desc *desc; 521 struct rt2560_tx_data *data; 522 int i; 523 524 for (i = 0; i < ring->count; i++) { 525 desc = &ring->desc[i]; 526 data = &ring->data[i]; 527 528 if (data->m != NULL) { 529 bus_dmamap_sync(ring->data_dmat, data->map, 530 BUS_DMASYNC_POSTWRITE); 531 bus_dmamap_unload(ring->data_dmat, data->map); 532 m_freem(data->m); 533 data->m = NULL; 534 } 535 536 if (data->ni != NULL) { 537 ieee80211_free_node(data->ni); 538 data->ni = NULL; 539 } 540 541 desc->flags = 0; 542 } 543 544 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 545 546 ring->queued = 0; 547 ring->cur = ring->next = 0; 548 ring->cur_encrypt = ring->next_encrypt = 0; 549 } 550 551 static void 552 rt2560_free_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring) 553 { 554 struct rt2560_tx_data *data; 555 int i; 556 557 if (ring->desc != NULL) { 558 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 559 BUS_DMASYNC_POSTWRITE); 560 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 561 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 562 } 563 564 if (ring->desc_dmat != NULL) 565 bus_dma_tag_destroy(ring->desc_dmat); 566 567 if (ring->data != NULL) { 568 for (i = 0; i < ring->count; i++) { 569 data = &ring->data[i]; 570 571 if (data->m != NULL) { 572 bus_dmamap_sync(ring->data_dmat, data->map, 573 BUS_DMASYNC_POSTWRITE); 574 bus_dmamap_unload(ring->data_dmat, data->map); 575 m_freem(data->m); 576 } 577 578 if (data->ni != NULL) 579 ieee80211_free_node(data->ni); 580 581 if (data->map != NULL) 582 bus_dmamap_destroy(ring->data_dmat, data->map); 583 } 584 585 free(ring->data, M_DEVBUF); 586 } 587 588 if (ring->data_dmat != NULL) 589 bus_dma_tag_destroy(ring->data_dmat); 590 } 591 592 static int 593 rt2560_alloc_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring, 594 int count) 595 { 596 struct rt2560_rx_desc *desc; 597 struct rt2560_rx_data *data; 598 bus_addr_t physaddr; 599 int i, error; 600 601 ring->count = count; 602 ring->cur = ring->next = 0; 603 ring->cur_decrypt = 0; 604 605 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 606 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 607 count * RT2560_RX_DESC_SIZE, 1, count * RT2560_RX_DESC_SIZE, 608 0, NULL, NULL, &ring->desc_dmat); 609 if (error != 0) { 610 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 611 goto fail; 612 } 613 614 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 615 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 616 if (error != 0) { 617 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 618 goto fail; 619 } 620 621 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 622 count * RT2560_RX_DESC_SIZE, rt2560_dma_map_addr, &ring->physaddr, 623 0); 624 if (error != 0) { 625 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 626 goto fail; 627 } 628 629 ring->data = malloc(count * sizeof (struct rt2560_rx_data), M_DEVBUF, 630 M_NOWAIT | M_ZERO); 631 if (ring->data == NULL) { 632 device_printf(sc->sc_dev, "could not allocate soft data\n"); 633 error = ENOMEM; 634 goto fail; 635 } 636 637 /* 638 * Pre-allocate Rx buffers and populate Rx ring. 639 */ 640 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 641 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 642 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 643 if (error != 0) { 644 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 645 goto fail; 646 } 647 648 for (i = 0; i < count; i++) { 649 desc = &sc->rxq.desc[i]; 650 data = &sc->rxq.data[i]; 651 652 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 653 if (error != 0) { 654 device_printf(sc->sc_dev, "could not create DMA map\n"); 655 goto fail; 656 } 657 658 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 659 if (data->m == NULL) { 660 device_printf(sc->sc_dev, 661 "could not allocate rx mbuf\n"); 662 error = ENOMEM; 663 goto fail; 664 } 665 666 error = bus_dmamap_load(ring->data_dmat, data->map, 667 mtod(data->m, void *), MCLBYTES, rt2560_dma_map_addr, 668 &physaddr, 0); 669 if (error != 0) { 670 device_printf(sc->sc_dev, 671 "could not load rx buf DMA map"); 672 goto fail; 673 } 674 675 desc->flags = htole32(RT2560_RX_BUSY); 676 desc->physaddr = htole32(physaddr); 677 } 678 679 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 680 681 return 0; 682 683 fail: rt2560_free_rx_ring(sc, ring); 684 return error; 685 } 686 687 static void 688 rt2560_reset_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring) 689 { 690 int i; 691 692 for (i = 0; i < ring->count; i++) { 693 ring->desc[i].flags = htole32(RT2560_RX_BUSY); 694 ring->data[i].drop = 0; 695 } 696 697 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 698 699 ring->cur = ring->next = 0; 700 ring->cur_decrypt = 0; 701 } 702 703 static void 704 rt2560_free_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring) 705 { 706 struct rt2560_rx_data *data; 707 int i; 708 709 if (ring->desc != NULL) { 710 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 711 BUS_DMASYNC_POSTWRITE); 712 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 713 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 714 } 715 716 if (ring->desc_dmat != NULL) 717 bus_dma_tag_destroy(ring->desc_dmat); 718 719 if (ring->data != NULL) { 720 for (i = 0; i < ring->count; i++) { 721 data = &ring->data[i]; 722 723 if (data->m != NULL) { 724 bus_dmamap_sync(ring->data_dmat, data->map, 725 BUS_DMASYNC_POSTREAD); 726 bus_dmamap_unload(ring->data_dmat, data->map); 727 m_freem(data->m); 728 } 729 730 if (data->map != NULL) 731 bus_dmamap_destroy(ring->data_dmat, data->map); 732 } 733 734 free(ring->data, M_DEVBUF); 735 } 736 737 if (ring->data_dmat != NULL) 738 bus_dma_tag_destroy(ring->data_dmat); 739 } 740 741 static int 742 rt2560_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 743 { 744 struct rt2560_vap *rvp = RT2560_VAP(vap); 745 struct rt2560_softc *sc = vap->iv_ic->ic_softc; 746 int error; 747 748 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 749 /* abort TSF synchronization */ 750 RAL_WRITE(sc, RT2560_CSR14, 0); 751 752 /* turn association led off */ 753 rt2560_update_led(sc, 0, 0); 754 } 755 756 error = rvp->ral_newstate(vap, nstate, arg); 757 758 if (error == 0 && nstate == IEEE80211_S_RUN) { 759 struct ieee80211_node *ni = vap->iv_bss; 760 struct mbuf *m; 761 762 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 763 rt2560_update_plcp(sc); 764 rt2560_set_basicrates(sc, &ni->ni_rates); 765 rt2560_set_bssid(sc, ni->ni_bssid); 766 } 767 768 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 769 vap->iv_opmode == IEEE80211_M_IBSS || 770 vap->iv_opmode == IEEE80211_M_MBSS) { 771 m = ieee80211_beacon_alloc(ni); 772 if (m == NULL) { 773 device_printf(sc->sc_dev, 774 "could not allocate beacon\n"); 775 return ENOBUFS; 776 } 777 ieee80211_ref_node(ni); 778 error = rt2560_tx_bcn(sc, m, ni); 779 if (error != 0) 780 return error; 781 } 782 783 /* turn association led on */ 784 rt2560_update_led(sc, 1, 0); 785 786 if (vap->iv_opmode != IEEE80211_M_MONITOR) 787 rt2560_enable_tsf_sync(sc); 788 else 789 rt2560_enable_tsf(sc); 790 } 791 return error; 792 } 793 794 /* 795 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 796 * 93C66). 797 */ 798 static uint16_t 799 rt2560_eeprom_read(struct rt2560_softc *sc, uint8_t addr) 800 { 801 uint32_t tmp; 802 uint16_t val; 803 int n; 804 805 /* clock C once before the first command */ 806 RT2560_EEPROM_CTL(sc, 0); 807 808 RT2560_EEPROM_CTL(sc, RT2560_S); 809 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 810 RT2560_EEPROM_CTL(sc, RT2560_S); 811 812 /* write start bit (1) */ 813 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D); 814 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C); 815 816 /* write READ opcode (10) */ 817 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D); 818 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C); 819 RT2560_EEPROM_CTL(sc, RT2560_S); 820 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 821 822 /* write address (A5-A0 or A7-A0) */ 823 n = (RAL_READ(sc, RT2560_CSR21) & RT2560_93C46) ? 5 : 7; 824 for (; n >= 0; n--) { 825 RT2560_EEPROM_CTL(sc, RT2560_S | 826 (((addr >> n) & 1) << RT2560_SHIFT_D)); 827 RT2560_EEPROM_CTL(sc, RT2560_S | 828 (((addr >> n) & 1) << RT2560_SHIFT_D) | RT2560_C); 829 } 830 831 RT2560_EEPROM_CTL(sc, RT2560_S); 832 833 /* read data Q15-Q0 */ 834 val = 0; 835 for (n = 15; n >= 0; n--) { 836 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 837 tmp = RAL_READ(sc, RT2560_CSR21); 838 val |= ((tmp & RT2560_Q) >> RT2560_SHIFT_Q) << n; 839 RT2560_EEPROM_CTL(sc, RT2560_S); 840 } 841 842 RT2560_EEPROM_CTL(sc, 0); 843 844 /* clear Chip Select and clock C */ 845 RT2560_EEPROM_CTL(sc, RT2560_S); 846 RT2560_EEPROM_CTL(sc, 0); 847 RT2560_EEPROM_CTL(sc, RT2560_C); 848 849 return val; 850 } 851 852 /* 853 * Some frames were processed by the hardware cipher engine and are ready for 854 * transmission. 855 */ 856 static void 857 rt2560_encryption_intr(struct rt2560_softc *sc) 858 { 859 struct rt2560_tx_desc *desc; 860 int hw; 861 862 /* retrieve last descriptor index processed by cipher engine */ 863 hw = RAL_READ(sc, RT2560_SECCSR1) - sc->txq.physaddr; 864 hw /= RT2560_TX_DESC_SIZE; 865 866 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 867 BUS_DMASYNC_POSTREAD); 868 869 while (sc->txq.next_encrypt != hw) { 870 if (sc->txq.next_encrypt == sc->txq.cur_encrypt) { 871 printf("hw encrypt %d, cur_encrypt %d\n", hw, 872 sc->txq.cur_encrypt); 873 break; 874 } 875 876 desc = &sc->txq.desc[sc->txq.next_encrypt]; 877 878 if ((le32toh(desc->flags) & RT2560_TX_BUSY) || 879 (le32toh(desc->flags) & RT2560_TX_CIPHER_BUSY)) 880 break; 881 882 /* for TKIP, swap eiv field to fix a bug in ASIC */ 883 if ((le32toh(desc->flags) & RT2560_TX_CIPHER_MASK) == 884 RT2560_TX_CIPHER_TKIP) 885 desc->eiv = bswap32(desc->eiv); 886 887 /* mark the frame ready for transmission */ 888 desc->flags |= htole32(RT2560_TX_VALID); 889 desc->flags |= htole32(RT2560_TX_BUSY); 890 891 DPRINTFN(sc, 15, "encryption done idx=%u\n", 892 sc->txq.next_encrypt); 893 894 sc->txq.next_encrypt = 895 (sc->txq.next_encrypt + 1) % RT2560_TX_RING_COUNT; 896 } 897 898 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 899 BUS_DMASYNC_PREWRITE); 900 901 /* kick Tx */ 902 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_TX); 903 } 904 905 static void 906 rt2560_tx_intr(struct rt2560_softc *sc) 907 { 908 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs; 909 struct rt2560_tx_desc *desc; 910 struct rt2560_tx_data *data; 911 struct mbuf *m; 912 struct ieee80211_node *ni; 913 uint32_t flags; 914 int status; 915 916 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 917 BUS_DMASYNC_POSTREAD); 918 919 txs->flags = IEEE80211_RATECTL_STATUS_LONG_RETRY; 920 for (;;) { 921 desc = &sc->txq.desc[sc->txq.next]; 922 data = &sc->txq.data[sc->txq.next]; 923 924 flags = le32toh(desc->flags); 925 if ((flags & RT2560_TX_BUSY) || 926 (flags & RT2560_TX_CIPHER_BUSY) || 927 !(flags & RT2560_TX_VALID)) 928 break; 929 930 m = data->m; 931 ni = data->ni; 932 933 switch (flags & RT2560_TX_RESULT_MASK) { 934 case RT2560_TX_SUCCESS: 935 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 936 txs->long_retries = 0; 937 938 DPRINTFN(sc, 10, "%s\n", "data frame sent successfully"); 939 if (data->rix != IEEE80211_FIXED_RATE_NONE) 940 ieee80211_ratectl_tx_complete(ni, txs); 941 status = 0; 942 break; 943 944 case RT2560_TX_SUCCESS_RETRY: 945 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 946 txs->long_retries = RT2560_TX_RETRYCNT(flags); 947 948 DPRINTFN(sc, 9, "data frame sent after %u retries\n", 949 txs->long_retries); 950 if (data->rix != IEEE80211_FIXED_RATE_NONE) 951 ieee80211_ratectl_tx_complete(ni, txs); 952 status = 0; 953 break; 954 955 case RT2560_TX_FAIL_RETRY: 956 txs->status = IEEE80211_RATECTL_TX_FAIL_LONG; 957 txs->long_retries = RT2560_TX_RETRYCNT(flags); 958 959 DPRINTFN(sc, 9, "data frame failed after %d retries\n", 960 txs->long_retries); 961 if (data->rix != IEEE80211_FIXED_RATE_NONE) 962 ieee80211_ratectl_tx_complete(ni, txs); 963 status = 1; 964 break; 965 966 case RT2560_TX_FAIL_INVALID: 967 case RT2560_TX_FAIL_OTHER: 968 default: 969 device_printf(sc->sc_dev, "sending data frame failed " 970 "0x%08x\n", flags); 971 status = 1; 972 } 973 974 bus_dmamap_sync(sc->txq.data_dmat, data->map, 975 BUS_DMASYNC_POSTWRITE); 976 bus_dmamap_unload(sc->txq.data_dmat, data->map); 977 978 ieee80211_tx_complete(ni, m, status); 979 data->ni = NULL; 980 data->m = NULL; 981 982 /* descriptor is no longer valid */ 983 desc->flags &= ~htole32(RT2560_TX_VALID); 984 985 DPRINTFN(sc, 15, "tx done idx=%u\n", sc->txq.next); 986 987 sc->txq.queued--; 988 sc->txq.next = (sc->txq.next + 1) % RT2560_TX_RING_COUNT; 989 } 990 991 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 992 BUS_DMASYNC_PREWRITE); 993 994 if (sc->prioq.queued == 0 && sc->txq.queued == 0) 995 sc->sc_tx_timer = 0; 996 997 if (sc->txq.queued < RT2560_TX_RING_COUNT - 1) 998 rt2560_start(sc); 999 } 1000 1001 static void 1002 rt2560_prio_intr(struct rt2560_softc *sc) 1003 { 1004 struct rt2560_tx_desc *desc; 1005 struct rt2560_tx_data *data; 1006 struct ieee80211_node *ni; 1007 struct mbuf *m; 1008 int flags; 1009 1010 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1011 BUS_DMASYNC_POSTREAD); 1012 1013 for (;;) { 1014 desc = &sc->prioq.desc[sc->prioq.next]; 1015 data = &sc->prioq.data[sc->prioq.next]; 1016 1017 flags = le32toh(desc->flags); 1018 if ((flags & RT2560_TX_BUSY) || (flags & RT2560_TX_VALID) == 0) 1019 break; 1020 1021 switch (flags & RT2560_TX_RESULT_MASK) { 1022 case RT2560_TX_SUCCESS: 1023 DPRINTFN(sc, 10, "%s\n", "mgt frame sent successfully"); 1024 break; 1025 1026 case RT2560_TX_SUCCESS_RETRY: 1027 DPRINTFN(sc, 9, "mgt frame sent after %u retries\n", 1028 (flags >> 5) & 0x7); 1029 break; 1030 1031 case RT2560_TX_FAIL_RETRY: 1032 DPRINTFN(sc, 9, "%s\n", 1033 "sending mgt frame failed (too much retries)"); 1034 break; 1035 1036 case RT2560_TX_FAIL_INVALID: 1037 case RT2560_TX_FAIL_OTHER: 1038 default: 1039 device_printf(sc->sc_dev, "sending mgt frame failed " 1040 "0x%08x\n", flags); 1041 break; 1042 } 1043 1044 bus_dmamap_sync(sc->prioq.data_dmat, data->map, 1045 BUS_DMASYNC_POSTWRITE); 1046 bus_dmamap_unload(sc->prioq.data_dmat, data->map); 1047 1048 m = data->m; 1049 data->m = NULL; 1050 ni = data->ni; 1051 data->ni = NULL; 1052 1053 /* descriptor is no longer valid */ 1054 desc->flags &= ~htole32(RT2560_TX_VALID); 1055 1056 DPRINTFN(sc, 15, "prio done idx=%u\n", sc->prioq.next); 1057 1058 sc->prioq.queued--; 1059 sc->prioq.next = (sc->prioq.next + 1) % RT2560_PRIO_RING_COUNT; 1060 1061 if (m->m_flags & M_TXCB) 1062 ieee80211_process_callback(ni, m, 1063 (flags & RT2560_TX_RESULT_MASK) &~ 1064 (RT2560_TX_SUCCESS | RT2560_TX_SUCCESS_RETRY)); 1065 m_freem(m); 1066 ieee80211_free_node(ni); 1067 } 1068 1069 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1070 BUS_DMASYNC_PREWRITE); 1071 1072 if (sc->prioq.queued == 0 && sc->txq.queued == 0) 1073 sc->sc_tx_timer = 0; 1074 1075 if (sc->prioq.queued < RT2560_PRIO_RING_COUNT) 1076 rt2560_start(sc); 1077 } 1078 1079 /* 1080 * Some frames were processed by the hardware cipher engine and are ready for 1081 * handoff to the IEEE802.11 layer. 1082 */ 1083 static void 1084 rt2560_decryption_intr(struct rt2560_softc *sc) 1085 { 1086 struct ieee80211com *ic = &sc->sc_ic; 1087 struct rt2560_rx_desc *desc; 1088 struct rt2560_rx_data *data; 1089 bus_addr_t physaddr; 1090 struct ieee80211_frame *wh; 1091 struct ieee80211_node *ni; 1092 struct mbuf *mnew, *m; 1093 int hw, error; 1094 int8_t rssi, nf; 1095 1096 /* retrieve last descriptor index processed by cipher engine */ 1097 hw = RAL_READ(sc, RT2560_SECCSR0) - sc->rxq.physaddr; 1098 hw /= RT2560_RX_DESC_SIZE; 1099 1100 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1101 BUS_DMASYNC_POSTREAD); 1102 1103 for (; sc->rxq.cur_decrypt != hw;) { 1104 desc = &sc->rxq.desc[sc->rxq.cur_decrypt]; 1105 data = &sc->rxq.data[sc->rxq.cur_decrypt]; 1106 1107 if ((le32toh(desc->flags) & RT2560_RX_BUSY) || 1108 (le32toh(desc->flags) & RT2560_RX_CIPHER_BUSY)) 1109 break; 1110 1111 if (data->drop) { 1112 counter_u64_add(ic->ic_ierrors, 1); 1113 goto skip; 1114 } 1115 1116 if ((le32toh(desc->flags) & RT2560_RX_CIPHER_MASK) != 0 && 1117 (le32toh(desc->flags) & RT2560_RX_ICV_ERROR)) { 1118 counter_u64_add(ic->ic_ierrors, 1); 1119 goto skip; 1120 } 1121 1122 /* 1123 * Try to allocate a new mbuf for this ring element and load it 1124 * before processing the current mbuf. If the ring element 1125 * cannot be loaded, drop the received packet and reuse the old 1126 * mbuf. In the unlikely case that the old mbuf can't be 1127 * reloaded either, explicitly panic. 1128 */ 1129 mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1130 if (mnew == NULL) { 1131 counter_u64_add(ic->ic_ierrors, 1); 1132 goto skip; 1133 } 1134 1135 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1136 BUS_DMASYNC_POSTREAD); 1137 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1138 1139 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1140 mtod(mnew, void *), MCLBYTES, rt2560_dma_map_addr, 1141 &physaddr, 0); 1142 if (error != 0) { 1143 m_freem(mnew); 1144 1145 /* try to reload the old mbuf */ 1146 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1147 mtod(data->m, void *), MCLBYTES, 1148 rt2560_dma_map_addr, &physaddr, 0); 1149 if (error != 0) { 1150 /* very unlikely that it will fail... */ 1151 panic("%s: could not load old rx mbuf", 1152 device_get_name(sc->sc_dev)); 1153 } 1154 counter_u64_add(ic->ic_ierrors, 1); 1155 goto skip; 1156 } 1157 1158 /* 1159 * New mbuf successfully loaded, update Rx ring and continue 1160 * processing. 1161 */ 1162 m = data->m; 1163 data->m = mnew; 1164 desc->physaddr = htole32(physaddr); 1165 1166 /* finalize mbuf */ 1167 m->m_pkthdr.len = m->m_len = 1168 (le32toh(desc->flags) >> 16) & 0xfff; 1169 1170 rssi = RT2560_RSSI(sc, desc->rssi); 1171 nf = RT2560_NOISE_FLOOR; 1172 if (ieee80211_radiotap_active(ic)) { 1173 struct rt2560_rx_radiotap_header *tap = &sc->sc_rxtap; 1174 uint32_t tsf_lo, tsf_hi; 1175 1176 /* get timestamp (low and high 32 bits) */ 1177 tsf_hi = RAL_READ(sc, RT2560_CSR17); 1178 tsf_lo = RAL_READ(sc, RT2560_CSR16); 1179 1180 tap->wr_tsf = 1181 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1182 tap->wr_flags = 0; 1183 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1184 (desc->flags & htole32(RT2560_RX_OFDM)) ? 1185 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1186 tap->wr_antenna = sc->rx_ant; 1187 tap->wr_antsignal = nf + rssi; 1188 tap->wr_antnoise = nf; 1189 } 1190 1191 sc->sc_flags |= RT2560_F_INPUT_RUNNING; 1192 RAL_UNLOCK(sc); 1193 wh = mtod(m, struct ieee80211_frame *); 1194 ni = ieee80211_find_rxnode(ic, 1195 (struct ieee80211_frame_min *)wh); 1196 if (ni != NULL) { 1197 (void) ieee80211_input(ni, m, rssi, nf); 1198 ieee80211_free_node(ni); 1199 } else 1200 (void) ieee80211_input_all(ic, m, rssi, nf); 1201 1202 RAL_LOCK(sc); 1203 sc->sc_flags &= ~RT2560_F_INPUT_RUNNING; 1204 skip: desc->flags = htole32(RT2560_RX_BUSY); 1205 1206 DPRINTFN(sc, 15, "decryption done idx=%u\n", sc->rxq.cur_decrypt); 1207 1208 sc->rxq.cur_decrypt = 1209 (sc->rxq.cur_decrypt + 1) % RT2560_RX_RING_COUNT; 1210 } 1211 1212 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1213 BUS_DMASYNC_PREWRITE); 1214 } 1215 1216 /* 1217 * Some frames were received. Pass them to the hardware cipher engine before 1218 * sending them to the 802.11 layer. 1219 */ 1220 static void 1221 rt2560_rx_intr(struct rt2560_softc *sc) 1222 { 1223 struct rt2560_rx_desc *desc; 1224 struct rt2560_rx_data *data; 1225 1226 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1227 BUS_DMASYNC_POSTREAD); 1228 1229 for (;;) { 1230 desc = &sc->rxq.desc[sc->rxq.cur]; 1231 data = &sc->rxq.data[sc->rxq.cur]; 1232 1233 if ((le32toh(desc->flags) & RT2560_RX_BUSY) || 1234 (le32toh(desc->flags) & RT2560_RX_CIPHER_BUSY)) 1235 break; 1236 1237 data->drop = 0; 1238 1239 if ((le32toh(desc->flags) & RT2560_RX_PHY_ERROR) || 1240 (le32toh(desc->flags) & RT2560_RX_CRC_ERROR)) { 1241 /* 1242 * This should not happen since we did not request 1243 * to receive those frames when we filled RXCSR0. 1244 */ 1245 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 1246 le32toh(desc->flags)); 1247 data->drop = 1; 1248 } 1249 1250 if (((le32toh(desc->flags) >> 16) & 0xfff) > MCLBYTES) { 1251 DPRINTFN(sc, 5, "%s\n", "bad length"); 1252 data->drop = 1; 1253 } 1254 1255 /* mark the frame for decryption */ 1256 desc->flags |= htole32(RT2560_RX_CIPHER_BUSY); 1257 1258 DPRINTFN(sc, 15, "rx done idx=%u\n", sc->rxq.cur); 1259 1260 sc->rxq.cur = (sc->rxq.cur + 1) % RT2560_RX_RING_COUNT; 1261 } 1262 1263 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1264 BUS_DMASYNC_PREWRITE); 1265 1266 /* kick decrypt */ 1267 RAL_WRITE(sc, RT2560_SECCSR0, RT2560_KICK_DECRYPT); 1268 } 1269 1270 static void 1271 rt2560_beacon_update(struct ieee80211vap *vap, int item) 1272 { 1273 struct ieee80211_beacon_offsets *bo = &vap->iv_bcn_off; 1274 1275 setbit(bo->bo_flags, item); 1276 } 1277 1278 /* 1279 * This function is called periodically in IBSS mode when a new beacon must be 1280 * sent out. 1281 */ 1282 static void 1283 rt2560_beacon_expire(struct rt2560_softc *sc) 1284 { 1285 struct ieee80211com *ic = &sc->sc_ic; 1286 struct rt2560_tx_data *data; 1287 1288 if (ic->ic_opmode != IEEE80211_M_IBSS && 1289 ic->ic_opmode != IEEE80211_M_HOSTAP && 1290 ic->ic_opmode != IEEE80211_M_MBSS) 1291 return; 1292 1293 data = &sc->bcnq.data[sc->bcnq.next]; 1294 /* 1295 * Don't send beacon if bsschan isn't set 1296 */ 1297 if (data->ni == NULL) 1298 return; 1299 1300 bus_dmamap_sync(sc->bcnq.data_dmat, data->map, BUS_DMASYNC_POSTWRITE); 1301 bus_dmamap_unload(sc->bcnq.data_dmat, data->map); 1302 1303 /* XXX 1 =>'s mcast frames which means all PS sta's will wakeup! */ 1304 ieee80211_beacon_update(data->ni, data->m, 1); 1305 1306 rt2560_tx_bcn(sc, data->m, data->ni); 1307 1308 DPRINTFN(sc, 15, "%s", "beacon expired\n"); 1309 1310 sc->bcnq.next = (sc->bcnq.next + 1) % RT2560_BEACON_RING_COUNT; 1311 } 1312 1313 /* ARGSUSED */ 1314 static void 1315 rt2560_wakeup_expire(struct rt2560_softc *sc) 1316 { 1317 DPRINTFN(sc, 2, "%s", "wakeup expired\n"); 1318 } 1319 1320 void 1321 rt2560_intr(void *arg) 1322 { 1323 struct rt2560_softc *sc = arg; 1324 uint32_t r; 1325 1326 RAL_LOCK(sc); 1327 1328 /* disable interrupts */ 1329 RAL_WRITE(sc, RT2560_CSR8, 0xffffffff); 1330 1331 /* don't re-enable interrupts if we're shutting down */ 1332 if (!(sc->sc_flags & RT2560_F_RUNNING)) { 1333 RAL_UNLOCK(sc); 1334 return; 1335 } 1336 1337 r = RAL_READ(sc, RT2560_CSR7); 1338 RAL_WRITE(sc, RT2560_CSR7, r); 1339 1340 if (r & RT2560_BEACON_EXPIRE) 1341 rt2560_beacon_expire(sc); 1342 1343 if (r & RT2560_WAKEUP_EXPIRE) 1344 rt2560_wakeup_expire(sc); 1345 1346 if (r & RT2560_ENCRYPTION_DONE) 1347 rt2560_encryption_intr(sc); 1348 1349 if (r & RT2560_TX_DONE) 1350 rt2560_tx_intr(sc); 1351 1352 if (r & RT2560_PRIO_DONE) 1353 rt2560_prio_intr(sc); 1354 1355 if (r & RT2560_DECRYPTION_DONE) 1356 rt2560_decryption_intr(sc); 1357 1358 if (r & RT2560_RX_DONE) { 1359 rt2560_rx_intr(sc); 1360 rt2560_encryption_intr(sc); 1361 } 1362 1363 /* re-enable interrupts */ 1364 RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK); 1365 1366 RAL_UNLOCK(sc); 1367 } 1368 1369 #define RAL_SIFS 10 /* us */ 1370 1371 #define RT2560_TXRX_TURNAROUND 10 /* us */ 1372 1373 static uint8_t 1374 rt2560_plcp_signal(int rate) 1375 { 1376 switch (rate) { 1377 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1378 case 12: return 0xb; 1379 case 18: return 0xf; 1380 case 24: return 0xa; 1381 case 36: return 0xe; 1382 case 48: return 0x9; 1383 case 72: return 0xd; 1384 case 96: return 0x8; 1385 case 108: return 0xc; 1386 1387 /* CCK rates (NB: not IEEE std, device-specific) */ 1388 case 2: return 0x0; 1389 case 4: return 0x1; 1390 case 11: return 0x2; 1391 case 22: return 0x3; 1392 } 1393 return 0xff; /* XXX unsupported/unknown rate */ 1394 } 1395 1396 static void 1397 rt2560_setup_tx_desc(struct rt2560_softc *sc, struct rt2560_tx_desc *desc, 1398 uint32_t flags, int len, int rate, int encrypt, bus_addr_t physaddr) 1399 { 1400 struct ieee80211com *ic = &sc->sc_ic; 1401 uint16_t plcp_length; 1402 int remainder; 1403 1404 desc->flags = htole32(flags); 1405 desc->flags |= htole32(len << 16); 1406 1407 desc->physaddr = htole32(physaddr); 1408 desc->wme = htole16( 1409 RT2560_AIFSN(2) | 1410 RT2560_LOGCWMIN(3) | 1411 RT2560_LOGCWMAX(8)); 1412 1413 /* setup PLCP fields */ 1414 desc->plcp_signal = rt2560_plcp_signal(rate); 1415 desc->plcp_service = 4; 1416 1417 len += IEEE80211_CRC_LEN; 1418 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { 1419 desc->flags |= htole32(RT2560_TX_OFDM); 1420 1421 plcp_length = len & 0xfff; 1422 desc->plcp_length_hi = plcp_length >> 6; 1423 desc->plcp_length_lo = plcp_length & 0x3f; 1424 } else { 1425 plcp_length = howmany(16 * len, rate); 1426 if (rate == 22) { 1427 remainder = (16 * len) % 22; 1428 if (remainder != 0 && remainder < 7) 1429 desc->plcp_service |= RT2560_PLCP_LENGEXT; 1430 } 1431 desc->plcp_length_hi = plcp_length >> 8; 1432 desc->plcp_length_lo = plcp_length & 0xff; 1433 1434 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1435 desc->plcp_signal |= 0x08; 1436 } 1437 1438 if (!encrypt) 1439 desc->flags |= htole32(RT2560_TX_VALID); 1440 desc->flags |= encrypt ? htole32(RT2560_TX_CIPHER_BUSY) 1441 : htole32(RT2560_TX_BUSY); 1442 } 1443 1444 static int 1445 rt2560_tx_bcn(struct rt2560_softc *sc, struct mbuf *m0, 1446 struct ieee80211_node *ni) 1447 { 1448 struct ieee80211vap *vap = ni->ni_vap; 1449 struct rt2560_tx_desc *desc; 1450 struct rt2560_tx_data *data; 1451 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1452 int nsegs, rate, error; 1453 1454 desc = &sc->bcnq.desc[sc->bcnq.cur]; 1455 data = &sc->bcnq.data[sc->bcnq.cur]; 1456 1457 /* XXX maybe a separate beacon rate? */ 1458 rate = vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)].mgmtrate; 1459 1460 error = bus_dmamap_load_mbuf_sg(sc->bcnq.data_dmat, data->map, m0, 1461 segs, &nsegs, BUS_DMA_NOWAIT); 1462 if (error != 0) { 1463 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1464 error); 1465 m_freem(m0); 1466 return error; 1467 } 1468 1469 if (ieee80211_radiotap_active_vap(vap)) { 1470 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1471 1472 tap->wt_flags = 0; 1473 tap->wt_rate = rate; 1474 tap->wt_antenna = sc->tx_ant; 1475 1476 ieee80211_radiotap_tx(vap, m0); 1477 } 1478 1479 data->m = m0; 1480 data->ni = ni; 1481 1482 rt2560_setup_tx_desc(sc, desc, RT2560_TX_IFS_NEWBACKOFF | 1483 RT2560_TX_TIMESTAMP, m0->m_pkthdr.len, rate, 0, segs->ds_addr); 1484 1485 DPRINTFN(sc, 10, "sending beacon frame len=%u idx=%u rate=%u\n", 1486 m0->m_pkthdr.len, sc->bcnq.cur, rate); 1487 1488 bus_dmamap_sync(sc->bcnq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1489 bus_dmamap_sync(sc->bcnq.desc_dmat, sc->bcnq.desc_map, 1490 BUS_DMASYNC_PREWRITE); 1491 1492 sc->bcnq.cur = (sc->bcnq.cur + 1) % RT2560_BEACON_RING_COUNT; 1493 1494 return 0; 1495 } 1496 1497 static int 1498 rt2560_tx_mgt(struct rt2560_softc *sc, struct mbuf *m0, 1499 struct ieee80211_node *ni) 1500 { 1501 struct ieee80211vap *vap = ni->ni_vap; 1502 struct ieee80211com *ic = ni->ni_ic; 1503 struct rt2560_tx_desc *desc; 1504 struct rt2560_tx_data *data; 1505 struct ieee80211_frame *wh; 1506 struct ieee80211_key *k; 1507 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1508 uint16_t dur; 1509 uint32_t flags = 0; 1510 int nsegs, rate, error; 1511 1512 desc = &sc->prioq.desc[sc->prioq.cur]; 1513 data = &sc->prioq.data[sc->prioq.cur]; 1514 1515 rate = ni->ni_txparms->mgmtrate; 1516 1517 wh = mtod(m0, struct ieee80211_frame *); 1518 1519 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1520 k = ieee80211_crypto_encap(ni, m0); 1521 if (k == NULL) { 1522 m_freem(m0); 1523 return ENOBUFS; 1524 } 1525 } 1526 1527 error = bus_dmamap_load_mbuf_sg(sc->prioq.data_dmat, data->map, m0, 1528 segs, &nsegs, 0); 1529 if (error != 0) { 1530 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1531 error); 1532 m_freem(m0); 1533 return error; 1534 } 1535 1536 if (ieee80211_radiotap_active_vap(vap)) { 1537 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1538 1539 tap->wt_flags = 0; 1540 tap->wt_rate = rate; 1541 tap->wt_antenna = sc->tx_ant; 1542 1543 ieee80211_radiotap_tx(vap, m0); 1544 } 1545 1546 data->m = m0; 1547 data->ni = ni; 1548 /* management frames are not taken into account for amrr */ 1549 data->rix = IEEE80211_FIXED_RATE_NONE; 1550 1551 wh = mtod(m0, struct ieee80211_frame *); 1552 1553 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1554 flags |= RT2560_TX_ACK; 1555 1556 dur = ieee80211_ack_duration(ic->ic_rt, 1557 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1558 *(uint16_t *)wh->i_dur = htole16(dur); 1559 1560 /* tell hardware to add timestamp for probe responses */ 1561 if (IEEE80211_IS_MGMT_PROBE_RESP(wh)) 1562 flags |= RT2560_TX_TIMESTAMP; 1563 } 1564 1565 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 0, 1566 segs->ds_addr); 1567 1568 bus_dmamap_sync(sc->prioq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1569 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1570 BUS_DMASYNC_PREWRITE); 1571 1572 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1573 m0->m_pkthdr.len, sc->prioq.cur, rate); 1574 1575 /* kick prio */ 1576 sc->prioq.queued++; 1577 sc->prioq.cur = (sc->prioq.cur + 1) % RT2560_PRIO_RING_COUNT; 1578 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_PRIO); 1579 1580 return 0; 1581 } 1582 1583 static int 1584 rt2560_sendprot(struct rt2560_softc *sc, 1585 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1586 { 1587 struct ieee80211com *ic = ni->ni_ic; 1588 struct rt2560_tx_desc *desc; 1589 struct rt2560_tx_data *data; 1590 struct mbuf *mprot; 1591 int protrate, flags, error; 1592 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1593 int nsegs; 1594 1595 mprot = ieee80211_alloc_prot(ni, m, rate, prot); 1596 if (mprot == NULL) { 1597 if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); 1598 device_printf(sc->sc_dev, 1599 "could not allocate mbuf for protection mode %d\n", prot); 1600 return ENOBUFS; 1601 } 1602 1603 desc = &sc->txq.desc[sc->txq.cur_encrypt]; 1604 data = &sc->txq.data[sc->txq.cur_encrypt]; 1605 1606 error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, 1607 mprot, segs, &nsegs, 0); 1608 if (error != 0) { 1609 device_printf(sc->sc_dev, 1610 "could not map mbuf (error %d)\n", error); 1611 m_freem(mprot); 1612 return error; 1613 } 1614 1615 data->m = mprot; 1616 data->ni = ieee80211_ref_node(ni); 1617 /* ctl frames are not taken into account for amrr */ 1618 data->rix = IEEE80211_FIXED_RATE_NONE; 1619 1620 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 1621 flags = RT2560_TX_MORE_FRAG; 1622 if (prot == IEEE80211_PROT_RTSCTS) 1623 flags |= RT2560_TX_ACK; 1624 1625 rt2560_setup_tx_desc(sc, desc, flags, mprot->m_pkthdr.len, protrate, 1, 1626 segs->ds_addr); 1627 1628 bus_dmamap_sync(sc->txq.data_dmat, data->map, 1629 BUS_DMASYNC_PREWRITE); 1630 1631 sc->txq.queued++; 1632 sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT; 1633 1634 return 0; 1635 } 1636 1637 static int 1638 rt2560_tx_raw(struct rt2560_softc *sc, struct mbuf *m0, 1639 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) 1640 { 1641 struct ieee80211vap *vap = ni->ni_vap; 1642 struct ieee80211com *ic = ni->ni_ic; 1643 struct rt2560_tx_desc *desc; 1644 struct rt2560_tx_data *data; 1645 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1646 uint32_t flags; 1647 int nsegs, rate, error; 1648 1649 desc = &sc->prioq.desc[sc->prioq.cur]; 1650 data = &sc->prioq.data[sc->prioq.cur]; 1651 1652 rate = params->ibp_rate0; 1653 if (!ieee80211_isratevalid(ic->ic_rt, rate)) { 1654 /* XXX fall back to mcast/mgmt rate? */ 1655 m_freem(m0); 1656 return EINVAL; 1657 } 1658 1659 flags = 0; 1660 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 1661 flags |= RT2560_TX_ACK; 1662 if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) { 1663 error = rt2560_sendprot(sc, m0, ni, 1664 params->ibp_flags & IEEE80211_BPF_RTS ? 1665 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY, 1666 rate); 1667 if (error) { 1668 m_freem(m0); 1669 return error; 1670 } 1671 flags |= RT2560_TX_LONG_RETRY | RT2560_TX_IFS_SIFS; 1672 } 1673 1674 error = bus_dmamap_load_mbuf_sg(sc->prioq.data_dmat, data->map, m0, 1675 segs, &nsegs, 0); 1676 if (error != 0) { 1677 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1678 error); 1679 m_freem(m0); 1680 return error; 1681 } 1682 1683 if (ieee80211_radiotap_active_vap(vap)) { 1684 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1685 1686 tap->wt_flags = 0; 1687 tap->wt_rate = rate; 1688 tap->wt_antenna = sc->tx_ant; 1689 1690 ieee80211_radiotap_tx(ni->ni_vap, m0); 1691 } 1692 1693 data->m = m0; 1694 data->ni = ni; 1695 1696 /* XXX need to setup descriptor ourself */ 1697 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, 1698 rate, (params->ibp_flags & IEEE80211_BPF_CRYPTO) != 0, 1699 segs->ds_addr); 1700 1701 bus_dmamap_sync(sc->prioq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1702 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1703 BUS_DMASYNC_PREWRITE); 1704 1705 DPRINTFN(sc, 10, "sending raw frame len=%u idx=%u rate=%u\n", 1706 m0->m_pkthdr.len, sc->prioq.cur, rate); 1707 1708 /* kick prio */ 1709 sc->prioq.queued++; 1710 sc->prioq.cur = (sc->prioq.cur + 1) % RT2560_PRIO_RING_COUNT; 1711 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_PRIO); 1712 1713 return 0; 1714 } 1715 1716 static int 1717 rt2560_tx_data(struct rt2560_softc *sc, struct mbuf *m0, 1718 struct ieee80211_node *ni) 1719 { 1720 struct ieee80211vap *vap = ni->ni_vap; 1721 struct ieee80211com *ic = ni->ni_ic; 1722 struct rt2560_tx_desc *desc; 1723 struct rt2560_tx_data *data; 1724 struct ieee80211_frame *wh; 1725 const struct ieee80211_txparam *tp = ni->ni_txparms; 1726 struct ieee80211_key *k; 1727 struct mbuf *mnew; 1728 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1729 uint16_t dur; 1730 uint32_t flags; 1731 int nsegs, rate, error; 1732 1733 wh = mtod(m0, struct ieee80211_frame *); 1734 1735 if (m0->m_flags & M_EAPOL) { 1736 rate = tp->mgmtrate; 1737 } else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1738 rate = tp->mcastrate; 1739 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1740 rate = tp->ucastrate; 1741 } else { 1742 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1743 rate = ni->ni_txrate; 1744 } 1745 1746 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1747 k = ieee80211_crypto_encap(ni, m0); 1748 if (k == NULL) { 1749 m_freem(m0); 1750 return ENOBUFS; 1751 } 1752 1753 /* packet header may have moved, reset our local pointer */ 1754 wh = mtod(m0, struct ieee80211_frame *); 1755 } 1756 1757 flags = 0; 1758 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1759 int prot = IEEE80211_PROT_NONE; 1760 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1761 prot = IEEE80211_PROT_RTSCTS; 1762 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1763 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) 1764 prot = ic->ic_protmode; 1765 if (prot != IEEE80211_PROT_NONE) { 1766 error = rt2560_sendprot(sc, m0, ni, prot, rate); 1767 if (error) { 1768 m_freem(m0); 1769 return error; 1770 } 1771 flags |= RT2560_TX_LONG_RETRY | RT2560_TX_IFS_SIFS; 1772 } 1773 } 1774 1775 data = &sc->txq.data[sc->txq.cur_encrypt]; 1776 desc = &sc->txq.desc[sc->txq.cur_encrypt]; 1777 1778 error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, m0, 1779 segs, &nsegs, 0); 1780 if (error != 0 && error != EFBIG) { 1781 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1782 error); 1783 m_freem(m0); 1784 return error; 1785 } 1786 if (error != 0) { 1787 mnew = m_defrag(m0, M_NOWAIT); 1788 if (mnew == NULL) { 1789 device_printf(sc->sc_dev, 1790 "could not defragment mbuf\n"); 1791 m_freem(m0); 1792 return ENOBUFS; 1793 } 1794 m0 = mnew; 1795 1796 error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, 1797 m0, segs, &nsegs, 0); 1798 if (error != 0) { 1799 device_printf(sc->sc_dev, 1800 "could not map mbuf (error %d)\n", error); 1801 m_freem(m0); 1802 return error; 1803 } 1804 1805 /* packet header may have moved, reset our local pointer */ 1806 wh = mtod(m0, struct ieee80211_frame *); 1807 } 1808 1809 if (ieee80211_radiotap_active_vap(vap)) { 1810 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1811 1812 tap->wt_flags = 0; 1813 tap->wt_rate = rate; 1814 tap->wt_antenna = sc->tx_ant; 1815 1816 ieee80211_radiotap_tx(vap, m0); 1817 } 1818 1819 data->m = m0; 1820 data->ni = ni; 1821 1822 /* remember link conditions for rate adaptation algorithm */ 1823 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1824 data->rix = ni->ni_txrate; 1825 /* XXX probably need last rssi value and not avg */ 1826 data->rssi = ic->ic_node_getrssi(ni); 1827 } else 1828 data->rix = IEEE80211_FIXED_RATE_NONE; 1829 1830 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1831 flags |= RT2560_TX_ACK; 1832 1833 dur = ieee80211_ack_duration(ic->ic_rt, 1834 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1835 *(uint16_t *)wh->i_dur = htole16(dur); 1836 } 1837 1838 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 1, 1839 segs->ds_addr); 1840 1841 bus_dmamap_sync(sc->txq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1842 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 1843 BUS_DMASYNC_PREWRITE); 1844 1845 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1846 m0->m_pkthdr.len, sc->txq.cur_encrypt, rate); 1847 1848 /* kick encrypt */ 1849 sc->txq.queued++; 1850 sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT; 1851 RAL_WRITE(sc, RT2560_SECCSR1, RT2560_KICK_ENCRYPT); 1852 1853 return 0; 1854 } 1855 1856 static int 1857 rt2560_transmit(struct ieee80211com *ic, struct mbuf *m) 1858 { 1859 struct rt2560_softc *sc = ic->ic_softc; 1860 int error; 1861 1862 RAL_LOCK(sc); 1863 if ((sc->sc_flags & RT2560_F_RUNNING) == 0) { 1864 RAL_UNLOCK(sc); 1865 return (ENXIO); 1866 } 1867 error = mbufq_enqueue(&sc->sc_snd, m); 1868 if (error) { 1869 RAL_UNLOCK(sc); 1870 return (error); 1871 } 1872 rt2560_start(sc); 1873 RAL_UNLOCK(sc); 1874 1875 return (0); 1876 } 1877 1878 static void 1879 rt2560_start(struct rt2560_softc *sc) 1880 { 1881 struct ieee80211_node *ni; 1882 struct mbuf *m; 1883 1884 RAL_LOCK_ASSERT(sc); 1885 1886 while (sc->txq.queued < RT2560_TX_RING_COUNT - 1 && 1887 (m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 1888 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1889 if (rt2560_tx_data(sc, m, ni) != 0) { 1890 if_inc_counter(ni->ni_vap->iv_ifp, 1891 IFCOUNTER_OERRORS, 1); 1892 ieee80211_free_node(ni); 1893 break; 1894 } 1895 sc->sc_tx_timer = 5; 1896 } 1897 } 1898 1899 static void 1900 rt2560_watchdog(void *arg) 1901 { 1902 struct rt2560_softc *sc = arg; 1903 1904 RAL_LOCK_ASSERT(sc); 1905 1906 KASSERT(sc->sc_flags & RT2560_F_RUNNING, ("not running")); 1907 1908 if (sc->sc_invalid) /* card ejected */ 1909 return; 1910 1911 rt2560_encryption_intr(sc); 1912 rt2560_tx_intr(sc); 1913 1914 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1915 device_printf(sc->sc_dev, "device timeout\n"); 1916 rt2560_init_locked(sc); 1917 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 1918 /* NB: callout is reset in rt2560_init() */ 1919 return; 1920 } 1921 callout_reset(&sc->watchdog_ch, hz, rt2560_watchdog, sc); 1922 } 1923 1924 static void 1925 rt2560_parent(struct ieee80211com *ic) 1926 { 1927 struct rt2560_softc *sc = ic->ic_softc; 1928 int startall = 0; 1929 1930 RAL_LOCK(sc); 1931 if (ic->ic_nrunning > 0) { 1932 if ((sc->sc_flags & RT2560_F_RUNNING) == 0) { 1933 rt2560_init_locked(sc); 1934 startall = 1; 1935 } else 1936 rt2560_update_promisc(ic); 1937 } else if (sc->sc_flags & RT2560_F_RUNNING) 1938 rt2560_stop_locked(sc); 1939 RAL_UNLOCK(sc); 1940 if (startall) 1941 ieee80211_start_all(ic); 1942 } 1943 1944 static void 1945 rt2560_bbp_write(struct rt2560_softc *sc, uint8_t reg, uint8_t val) 1946 { 1947 uint32_t tmp; 1948 int ntries; 1949 1950 for (ntries = 0; ntries < 100; ntries++) { 1951 if (!(RAL_READ(sc, RT2560_BBPCSR) & RT2560_BBP_BUSY)) 1952 break; 1953 DELAY(1); 1954 } 1955 if (ntries == 100) { 1956 device_printf(sc->sc_dev, "could not write to BBP\n"); 1957 return; 1958 } 1959 1960 tmp = RT2560_BBP_WRITE | RT2560_BBP_BUSY | reg << 8 | val; 1961 RAL_WRITE(sc, RT2560_BBPCSR, tmp); 1962 1963 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1964 } 1965 1966 static uint8_t 1967 rt2560_bbp_read(struct rt2560_softc *sc, uint8_t reg) 1968 { 1969 uint32_t val; 1970 int ntries; 1971 1972 for (ntries = 0; ntries < 100; ntries++) { 1973 if (!(RAL_READ(sc, RT2560_BBPCSR) & RT2560_BBP_BUSY)) 1974 break; 1975 DELAY(1); 1976 } 1977 if (ntries == 100) { 1978 device_printf(sc->sc_dev, "could not read from BBP\n"); 1979 return 0; 1980 } 1981 1982 val = RT2560_BBP_BUSY | reg << 8; 1983 RAL_WRITE(sc, RT2560_BBPCSR, val); 1984 1985 for (ntries = 0; ntries < 100; ntries++) { 1986 val = RAL_READ(sc, RT2560_BBPCSR); 1987 if (!(val & RT2560_BBP_BUSY)) 1988 return val & 0xff; 1989 DELAY(1); 1990 } 1991 1992 device_printf(sc->sc_dev, "could not read from BBP\n"); 1993 return 0; 1994 } 1995 1996 static void 1997 rt2560_rf_write(struct rt2560_softc *sc, uint8_t reg, uint32_t val) 1998 { 1999 uint32_t tmp; 2000 int ntries; 2001 2002 for (ntries = 0; ntries < 100; ntries++) { 2003 if (!(RAL_READ(sc, RT2560_RFCSR) & RT2560_RF_BUSY)) 2004 break; 2005 DELAY(1); 2006 } 2007 if (ntries == 100) { 2008 device_printf(sc->sc_dev, "could not write to RF\n"); 2009 return; 2010 } 2011 2012 tmp = RT2560_RF_BUSY | RT2560_RF_20BIT | (val & 0xfffff) << 2 | 2013 (reg & 0x3); 2014 RAL_WRITE(sc, RT2560_RFCSR, tmp); 2015 2016 /* remember last written value in sc */ 2017 sc->rf_regs[reg] = val; 2018 2019 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 0x3, val & 0xfffff); 2020 } 2021 2022 static void 2023 rt2560_set_chan(struct rt2560_softc *sc, struct ieee80211_channel *c) 2024 { 2025 struct ieee80211com *ic = &sc->sc_ic; 2026 uint8_t power, tmp; 2027 u_int i, chan; 2028 2029 chan = ieee80211_chan2ieee(ic, c); 2030 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 2031 2032 if (IEEE80211_IS_CHAN_2GHZ(c)) 2033 power = min(sc->txpow[chan - 1], 31); 2034 else 2035 power = 31; 2036 2037 /* adjust txpower using ifconfig settings */ 2038 power -= (100 - ic->ic_txpowlimit) / 8; 2039 2040 DPRINTFN(sc, 2, "setting channel to %u, txpower to %u\n", chan, power); 2041 2042 switch (sc->rf_rev) { 2043 case RT2560_RF_2522: 2044 rt2560_rf_write(sc, RAL_RF1, 0x00814); 2045 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2522_r2[chan - 1]); 2046 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 2047 break; 2048 2049 case RT2560_RF_2523: 2050 rt2560_rf_write(sc, RAL_RF1, 0x08804); 2051 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2523_r2[chan - 1]); 2052 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x38044); 2053 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2054 break; 2055 2056 case RT2560_RF_2524: 2057 rt2560_rf_write(sc, RAL_RF1, 0x0c808); 2058 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2524_r2[chan - 1]); 2059 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 2060 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2061 break; 2062 2063 case RT2560_RF_2525: 2064 rt2560_rf_write(sc, RAL_RF1, 0x08808); 2065 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525_hi_r2[chan - 1]); 2066 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2067 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2068 2069 rt2560_rf_write(sc, RAL_RF1, 0x08808); 2070 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525_r2[chan - 1]); 2071 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2072 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2073 break; 2074 2075 case RT2560_RF_2525E: 2076 rt2560_rf_write(sc, RAL_RF1, 0x08808); 2077 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525e_r2[chan - 1]); 2078 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2079 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00286 : 0x00282); 2080 break; 2081 2082 case RT2560_RF_2526: 2083 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2526_hi_r2[chan - 1]); 2084 rt2560_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381); 2085 rt2560_rf_write(sc, RAL_RF1, 0x08804); 2086 2087 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2526_r2[chan - 1]); 2088 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2089 rt2560_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381); 2090 break; 2091 2092 /* dual-band RF */ 2093 case RT2560_RF_5222: 2094 for (i = 0; rt2560_rf5222[i].chan != chan; i++); 2095 2096 rt2560_rf_write(sc, RAL_RF1, rt2560_rf5222[i].r1); 2097 rt2560_rf_write(sc, RAL_RF2, rt2560_rf5222[i].r2); 2098 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 2099 rt2560_rf_write(sc, RAL_RF4, rt2560_rf5222[i].r4); 2100 break; 2101 default: 2102 printf("unknown ral rev=%d\n", sc->rf_rev); 2103 } 2104 2105 /* XXX */ 2106 if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { 2107 /* set Japan filter bit for channel 14 */ 2108 tmp = rt2560_bbp_read(sc, 70); 2109 2110 tmp &= ~RT2560_JAPAN_FILTER; 2111 if (chan == 14) 2112 tmp |= RT2560_JAPAN_FILTER; 2113 2114 rt2560_bbp_write(sc, 70, tmp); 2115 2116 /* clear CRC errors */ 2117 RAL_READ(sc, RT2560_CNT0); 2118 } 2119 } 2120 2121 static void 2122 rt2560_getradiocaps(struct ieee80211com *ic, 2123 int maxchans, int *nchans, struct ieee80211_channel chans[]) 2124 { 2125 struct rt2560_softc *sc = ic->ic_softc; 2126 uint8_t bands[IEEE80211_MODE_BYTES]; 2127 2128 memset(bands, 0, sizeof(bands)); 2129 setbit(bands, IEEE80211_MODE_11B); 2130 setbit(bands, IEEE80211_MODE_11G); 2131 ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, bands, 0); 2132 2133 if (sc->rf_rev == RT2560_RF_5222) { 2134 setbit(bands, IEEE80211_MODE_11A); 2135 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, 2136 rt2560_chan_5ghz, nitems(rt2560_chan_5ghz), bands, 0); 2137 } 2138 } 2139 2140 static void 2141 rt2560_set_channel(struct ieee80211com *ic) 2142 { 2143 struct rt2560_softc *sc = ic->ic_softc; 2144 2145 RAL_LOCK(sc); 2146 rt2560_set_chan(sc, ic->ic_curchan); 2147 RAL_UNLOCK(sc); 2148 2149 } 2150 2151 #if 0 2152 /* 2153 * Disable RF auto-tuning. 2154 */ 2155 static void 2156 rt2560_disable_rf_tune(struct rt2560_softc *sc) 2157 { 2158 uint32_t tmp; 2159 2160 if (sc->rf_rev != RT2560_RF_2523) { 2161 tmp = sc->rf_regs[RAL_RF1] & ~RAL_RF1_AUTOTUNE; 2162 rt2560_rf_write(sc, RAL_RF1, tmp); 2163 } 2164 2165 tmp = sc->rf_regs[RAL_RF3] & ~RAL_RF3_AUTOTUNE; 2166 rt2560_rf_write(sc, RAL_RF3, tmp); 2167 2168 DPRINTFN(sc, 2, "%s", "disabling RF autotune\n"); 2169 } 2170 #endif 2171 2172 /* 2173 * Refer to IEEE Std 802.11-1999 pp. 123 for more information on TSF 2174 * synchronization. 2175 */ 2176 static void 2177 rt2560_enable_tsf_sync(struct rt2560_softc *sc) 2178 { 2179 struct ieee80211com *ic = &sc->sc_ic; 2180 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2181 uint16_t logcwmin, preload; 2182 uint32_t tmp; 2183 2184 /* first, disable TSF synchronization */ 2185 RAL_WRITE(sc, RT2560_CSR14, 0); 2186 2187 tmp = 16 * vap->iv_bss->ni_intval; 2188 RAL_WRITE(sc, RT2560_CSR12, tmp); 2189 2190 RAL_WRITE(sc, RT2560_CSR13, 0); 2191 2192 logcwmin = 5; 2193 preload = (vap->iv_opmode == IEEE80211_M_STA) ? 384 : 1024; 2194 tmp = logcwmin << 16 | preload; 2195 RAL_WRITE(sc, RT2560_BCNOCSR, tmp); 2196 2197 /* finally, enable TSF synchronization */ 2198 tmp = RT2560_ENABLE_TSF | RT2560_ENABLE_TBCN; 2199 if (ic->ic_opmode == IEEE80211_M_STA) 2200 tmp |= RT2560_ENABLE_TSF_SYNC(1); 2201 else 2202 tmp |= RT2560_ENABLE_TSF_SYNC(2) | 2203 RT2560_ENABLE_BEACON_GENERATOR; 2204 RAL_WRITE(sc, RT2560_CSR14, tmp); 2205 2206 DPRINTF(sc, "%s", "enabling TSF synchronization\n"); 2207 } 2208 2209 static void 2210 rt2560_enable_tsf(struct rt2560_softc *sc) 2211 { 2212 RAL_WRITE(sc, RT2560_CSR14, 0); 2213 RAL_WRITE(sc, RT2560_CSR14, 2214 RT2560_ENABLE_TSF_SYNC(2) | RT2560_ENABLE_TSF); 2215 } 2216 2217 static void 2218 rt2560_update_plcp(struct rt2560_softc *sc) 2219 { 2220 struct ieee80211com *ic = &sc->sc_ic; 2221 2222 /* no short preamble for 1Mbps */ 2223 RAL_WRITE(sc, RT2560_PLCP1MCSR, 0x00700400); 2224 2225 if (!(ic->ic_flags & IEEE80211_F_SHPREAMBLE)) { 2226 /* values taken from the reference driver */ 2227 RAL_WRITE(sc, RT2560_PLCP2MCSR, 0x00380401); 2228 RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x00150402); 2229 RAL_WRITE(sc, RT2560_PLCP11MCSR, 0x000b8403); 2230 } else { 2231 /* same values as above or'ed 0x8 */ 2232 RAL_WRITE(sc, RT2560_PLCP2MCSR, 0x00380409); 2233 RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x0015040a); 2234 RAL_WRITE(sc, RT2560_PLCP11MCSR, 0x000b840b); 2235 } 2236 2237 DPRINTF(sc, "updating PLCP for %s preamble\n", 2238 (ic->ic_flags & IEEE80211_F_SHPREAMBLE) ? "short" : "long"); 2239 } 2240 2241 /* 2242 * This function can be called by ieee80211_set_shortslottime(). Refer to 2243 * IEEE Std 802.11-1999 pp. 85 to know how these values are computed. 2244 */ 2245 static void 2246 rt2560_update_slot(struct ieee80211com *ic) 2247 { 2248 struct rt2560_softc *sc = ic->ic_softc; 2249 uint8_t slottime; 2250 uint16_t tx_sifs, tx_pifs, tx_difs, eifs; 2251 uint32_t tmp; 2252 2253 #ifndef FORCE_SLOTTIME 2254 slottime = IEEE80211_GET_SLOTTIME(ic); 2255 #else 2256 /* 2257 * Setting slot time according to "short slot time" capability 2258 * in beacon/probe_resp seems to cause problem to acknowledge 2259 * certain AP's data frames transimitted at CCK/DS rates: the 2260 * problematic AP keeps retransmitting data frames, probably 2261 * because MAC level acks are not received by hardware. 2262 * So we cheat a little bit here by claiming we are capable of 2263 * "short slot time" but setting hardware slot time to the normal 2264 * slot time. ral(4) does not seem to have trouble to receive 2265 * frames transmitted using short slot time even if hardware 2266 * slot time is set to normal slot time. If we didn't use this 2267 * trick, we would have to claim that short slot time is not 2268 * supported; this would give relative poor RX performance 2269 * (-1Mb~-2Mb lower) and the _whole_ BSS would stop using short 2270 * slot time. 2271 */ 2272 slottime = IEEE80211_DUR_SLOT; 2273 #endif 2274 2275 /* update the MAC slot boundaries */ 2276 tx_sifs = RAL_SIFS - RT2560_TXRX_TURNAROUND; 2277 tx_pifs = tx_sifs + slottime; 2278 tx_difs = IEEE80211_DUR_DIFS(tx_sifs, slottime); 2279 eifs = (ic->ic_curmode == IEEE80211_MODE_11B) ? 364 : 60; 2280 2281 tmp = RAL_READ(sc, RT2560_CSR11); 2282 tmp = (tmp & ~0x1f00) | slottime << 8; 2283 RAL_WRITE(sc, RT2560_CSR11, tmp); 2284 2285 tmp = tx_pifs << 16 | tx_sifs; 2286 RAL_WRITE(sc, RT2560_CSR18, tmp); 2287 2288 tmp = eifs << 16 | tx_difs; 2289 RAL_WRITE(sc, RT2560_CSR19, tmp); 2290 2291 DPRINTF(sc, "setting slottime to %uus\n", slottime); 2292 } 2293 2294 static void 2295 rt2560_set_basicrates(struct rt2560_softc *sc, 2296 const struct ieee80211_rateset *rs) 2297 { 2298 struct ieee80211com *ic = &sc->sc_ic; 2299 uint32_t mask = 0; 2300 uint8_t rate; 2301 int i; 2302 2303 for (i = 0; i < rs->rs_nrates; i++) { 2304 rate = rs->rs_rates[i]; 2305 2306 if (!(rate & IEEE80211_RATE_BASIC)) 2307 continue; 2308 2309 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, 2310 IEEE80211_RV(rate)); 2311 } 2312 2313 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, mask); 2314 2315 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 2316 } 2317 2318 static void 2319 rt2560_update_led(struct rt2560_softc *sc, int led1, int led2) 2320 { 2321 uint32_t tmp; 2322 2323 /* set ON period to 70ms and OFF period to 30ms */ 2324 tmp = led1 << 16 | led2 << 17 | 70 << 8 | 30; 2325 RAL_WRITE(sc, RT2560_LEDCSR, tmp); 2326 } 2327 2328 static void 2329 rt2560_set_bssid(struct rt2560_softc *sc, const uint8_t *bssid) 2330 { 2331 uint32_t tmp; 2332 2333 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2334 RAL_WRITE(sc, RT2560_CSR5, tmp); 2335 2336 tmp = bssid[4] | bssid[5] << 8; 2337 RAL_WRITE(sc, RT2560_CSR6, tmp); 2338 2339 DPRINTF(sc, "setting BSSID to %6D\n", bssid, ":"); 2340 } 2341 2342 static void 2343 rt2560_set_macaddr(struct rt2560_softc *sc, const uint8_t *addr) 2344 { 2345 uint32_t tmp; 2346 2347 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2348 RAL_WRITE(sc, RT2560_CSR3, tmp); 2349 2350 tmp = addr[4] | addr[5] << 8; 2351 RAL_WRITE(sc, RT2560_CSR4, tmp); 2352 2353 DPRINTF(sc, "setting MAC address to %6D\n", addr, ":"); 2354 } 2355 2356 static void 2357 rt2560_get_macaddr(struct rt2560_softc *sc, uint8_t *addr) 2358 { 2359 uint32_t tmp; 2360 2361 tmp = RAL_READ(sc, RT2560_CSR3); 2362 addr[0] = tmp & 0xff; 2363 addr[1] = (tmp >> 8) & 0xff; 2364 addr[2] = (tmp >> 16) & 0xff; 2365 addr[3] = (tmp >> 24); 2366 2367 tmp = RAL_READ(sc, RT2560_CSR4); 2368 addr[4] = tmp & 0xff; 2369 addr[5] = (tmp >> 8) & 0xff; 2370 } 2371 2372 static void 2373 rt2560_update_promisc(struct ieee80211com *ic) 2374 { 2375 struct rt2560_softc *sc = ic->ic_softc; 2376 uint32_t tmp; 2377 2378 tmp = RAL_READ(sc, RT2560_RXCSR0); 2379 2380 tmp &= ~RT2560_DROP_NOT_TO_ME; 2381 if (ic->ic_promisc == 0) 2382 tmp |= RT2560_DROP_NOT_TO_ME; 2383 2384 RAL_WRITE(sc, RT2560_RXCSR0, tmp); 2385 2386 DPRINTF(sc, "%s promiscuous mode\n", 2387 (ic->ic_promisc > 0) ? "entering" : "leaving"); 2388 } 2389 2390 static const char * 2391 rt2560_get_rf(int rev) 2392 { 2393 switch (rev) { 2394 case RT2560_RF_2522: return "RT2522"; 2395 case RT2560_RF_2523: return "RT2523"; 2396 case RT2560_RF_2524: return "RT2524"; 2397 case RT2560_RF_2525: return "RT2525"; 2398 case RT2560_RF_2525E: return "RT2525e"; 2399 case RT2560_RF_2526: return "RT2526"; 2400 case RT2560_RF_5222: return "RT5222"; 2401 default: return "unknown"; 2402 } 2403 } 2404 2405 static void 2406 rt2560_read_config(struct rt2560_softc *sc) 2407 { 2408 uint16_t val; 2409 int i; 2410 2411 val = rt2560_eeprom_read(sc, RT2560_EEPROM_CONFIG0); 2412 sc->rf_rev = (val >> 11) & 0x7; 2413 sc->hw_radio = (val >> 10) & 0x1; 2414 sc->led_mode = (val >> 6) & 0x7; 2415 sc->rx_ant = (val >> 4) & 0x3; 2416 sc->tx_ant = (val >> 2) & 0x3; 2417 sc->nb_ant = val & 0x3; 2418 2419 /* read default values for BBP registers */ 2420 for (i = 0; i < 16; i++) { 2421 val = rt2560_eeprom_read(sc, RT2560_EEPROM_BBP_BASE + i); 2422 if (val == 0 || val == 0xffff) 2423 continue; 2424 2425 sc->bbp_prom[i].reg = val >> 8; 2426 sc->bbp_prom[i].val = val & 0xff; 2427 } 2428 2429 /* read Tx power for all b/g channels */ 2430 for (i = 0; i < 14 / 2; i++) { 2431 val = rt2560_eeprom_read(sc, RT2560_EEPROM_TXPOWER + i); 2432 sc->txpow[i * 2] = val & 0xff; 2433 sc->txpow[i * 2 + 1] = val >> 8; 2434 } 2435 for (i = 0; i < 14; ++i) { 2436 if (sc->txpow[i] > 31) 2437 sc->txpow[i] = 24; 2438 } 2439 2440 val = rt2560_eeprom_read(sc, RT2560_EEPROM_CALIBRATE); 2441 if ((val & 0xff) == 0xff) 2442 sc->rssi_corr = RT2560_DEFAULT_RSSI_CORR; 2443 else 2444 sc->rssi_corr = val & 0xff; 2445 DPRINTF(sc, "rssi correction %d, calibrate 0x%02x\n", 2446 sc->rssi_corr, val); 2447 } 2448 2449 static void 2450 rt2560_scan_start(struct ieee80211com *ic) 2451 { 2452 struct rt2560_softc *sc = ic->ic_softc; 2453 2454 /* abort TSF synchronization */ 2455 RAL_WRITE(sc, RT2560_CSR14, 0); 2456 rt2560_set_bssid(sc, ieee80211broadcastaddr); 2457 } 2458 2459 static void 2460 rt2560_scan_end(struct ieee80211com *ic) 2461 { 2462 struct rt2560_softc *sc = ic->ic_softc; 2463 struct ieee80211vap *vap = ic->ic_scan->ss_vap; 2464 2465 rt2560_enable_tsf_sync(sc); 2466 /* XXX keep local copy */ 2467 rt2560_set_bssid(sc, vap->iv_bss->ni_bssid); 2468 } 2469 2470 static int 2471 rt2560_bbp_init(struct rt2560_softc *sc) 2472 { 2473 int i, ntries; 2474 2475 /* wait for BBP to be ready */ 2476 for (ntries = 0; ntries < 100; ntries++) { 2477 if (rt2560_bbp_read(sc, RT2560_BBP_VERSION) != 0) 2478 break; 2479 DELAY(1); 2480 } 2481 if (ntries == 100) { 2482 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2483 return EIO; 2484 } 2485 2486 /* initialize BBP registers to default values */ 2487 for (i = 0; i < nitems(rt2560_def_bbp); i++) { 2488 rt2560_bbp_write(sc, rt2560_def_bbp[i].reg, 2489 rt2560_def_bbp[i].val); 2490 } 2491 2492 /* initialize BBP registers to values stored in EEPROM */ 2493 for (i = 0; i < 16; i++) { 2494 if (sc->bbp_prom[i].reg == 0 && sc->bbp_prom[i].val == 0) 2495 break; 2496 rt2560_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2497 } 2498 rt2560_bbp_write(sc, 17, 0x48); /* XXX restore bbp17 */ 2499 2500 return 0; 2501 } 2502 2503 static void 2504 rt2560_set_txantenna(struct rt2560_softc *sc, int antenna) 2505 { 2506 uint32_t tmp; 2507 uint8_t tx; 2508 2509 tx = rt2560_bbp_read(sc, RT2560_BBP_TX) & ~RT2560_BBP_ANTMASK; 2510 if (antenna == 1) 2511 tx |= RT2560_BBP_ANTA; 2512 else if (antenna == 2) 2513 tx |= RT2560_BBP_ANTB; 2514 else 2515 tx |= RT2560_BBP_DIVERSITY; 2516 2517 /* need to force I/Q flip for RF 2525e, 2526 and 5222 */ 2518 if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526 || 2519 sc->rf_rev == RT2560_RF_5222) 2520 tx |= RT2560_BBP_FLIPIQ; 2521 2522 rt2560_bbp_write(sc, RT2560_BBP_TX, tx); 2523 2524 /* update values for CCK and OFDM in BBPCSR1 */ 2525 tmp = RAL_READ(sc, RT2560_BBPCSR1) & ~0x00070007; 2526 tmp |= (tx & 0x7) << 16 | (tx & 0x7); 2527 RAL_WRITE(sc, RT2560_BBPCSR1, tmp); 2528 } 2529 2530 static void 2531 rt2560_set_rxantenna(struct rt2560_softc *sc, int antenna) 2532 { 2533 uint8_t rx; 2534 2535 rx = rt2560_bbp_read(sc, RT2560_BBP_RX) & ~RT2560_BBP_ANTMASK; 2536 if (antenna == 1) 2537 rx |= RT2560_BBP_ANTA; 2538 else if (antenna == 2) 2539 rx |= RT2560_BBP_ANTB; 2540 else 2541 rx |= RT2560_BBP_DIVERSITY; 2542 2543 /* need to force no I/Q flip for RF 2525e and 2526 */ 2544 if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526) 2545 rx &= ~RT2560_BBP_FLIPIQ; 2546 2547 rt2560_bbp_write(sc, RT2560_BBP_RX, rx); 2548 } 2549 2550 static void 2551 rt2560_init_locked(struct rt2560_softc *sc) 2552 { 2553 struct ieee80211com *ic = &sc->sc_ic; 2554 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2555 uint32_t tmp; 2556 int i; 2557 2558 RAL_LOCK_ASSERT(sc); 2559 2560 rt2560_stop_locked(sc); 2561 2562 /* setup tx rings */ 2563 tmp = RT2560_PRIO_RING_COUNT << 24 | 2564 RT2560_ATIM_RING_COUNT << 16 | 2565 RT2560_TX_RING_COUNT << 8 | 2566 RT2560_TX_DESC_SIZE; 2567 2568 /* rings must be initialized in this exact order */ 2569 RAL_WRITE(sc, RT2560_TXCSR2, tmp); 2570 RAL_WRITE(sc, RT2560_TXCSR3, sc->txq.physaddr); 2571 RAL_WRITE(sc, RT2560_TXCSR5, sc->prioq.physaddr); 2572 RAL_WRITE(sc, RT2560_TXCSR4, sc->atimq.physaddr); 2573 RAL_WRITE(sc, RT2560_TXCSR6, sc->bcnq.physaddr); 2574 2575 /* setup rx ring */ 2576 tmp = RT2560_RX_RING_COUNT << 8 | RT2560_RX_DESC_SIZE; 2577 2578 RAL_WRITE(sc, RT2560_RXCSR1, tmp); 2579 RAL_WRITE(sc, RT2560_RXCSR2, sc->rxq.physaddr); 2580 2581 /* initialize MAC registers to default values */ 2582 for (i = 0; i < nitems(rt2560_def_mac); i++) 2583 RAL_WRITE(sc, rt2560_def_mac[i].reg, rt2560_def_mac[i].val); 2584 2585 rt2560_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 2586 2587 /* set basic rate set (will be updated later) */ 2588 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x153); 2589 2590 rt2560_update_slot(ic); 2591 rt2560_update_plcp(sc); 2592 rt2560_update_led(sc, 0, 0); 2593 2594 RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC); 2595 RAL_WRITE(sc, RT2560_CSR1, RT2560_HOST_READY); 2596 2597 if (rt2560_bbp_init(sc) != 0) { 2598 rt2560_stop_locked(sc); 2599 return; 2600 } 2601 2602 rt2560_set_txantenna(sc, sc->tx_ant); 2603 rt2560_set_rxantenna(sc, sc->rx_ant); 2604 2605 /* set default BSS channel */ 2606 rt2560_set_chan(sc, ic->ic_curchan); 2607 2608 /* kick Rx */ 2609 tmp = RT2560_DROP_PHY_ERROR | RT2560_DROP_CRC_ERROR; 2610 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2611 tmp |= RT2560_DROP_CTL | RT2560_DROP_VERSION_ERROR; 2612 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 2613 ic->ic_opmode != IEEE80211_M_MBSS) 2614 tmp |= RT2560_DROP_TODS; 2615 if (ic->ic_promisc == 0) 2616 tmp |= RT2560_DROP_NOT_TO_ME; 2617 } 2618 RAL_WRITE(sc, RT2560_RXCSR0, tmp); 2619 2620 /* clear old FCS and Rx FIFO errors */ 2621 RAL_READ(sc, RT2560_CNT0); 2622 RAL_READ(sc, RT2560_CNT4); 2623 2624 /* clear any pending interrupts */ 2625 RAL_WRITE(sc, RT2560_CSR7, 0xffffffff); 2626 2627 /* enable interrupts */ 2628 RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK); 2629 2630 sc->sc_flags |= RT2560_F_RUNNING; 2631 2632 callout_reset(&sc->watchdog_ch, hz, rt2560_watchdog, sc); 2633 } 2634 2635 static void 2636 rt2560_init(void *priv) 2637 { 2638 struct rt2560_softc *sc = priv; 2639 struct ieee80211com *ic = &sc->sc_ic; 2640 2641 RAL_LOCK(sc); 2642 rt2560_init_locked(sc); 2643 RAL_UNLOCK(sc); 2644 2645 if (sc->sc_flags & RT2560_F_RUNNING) 2646 ieee80211_start_all(ic); /* start all vap's */ 2647 } 2648 2649 static void 2650 rt2560_stop_locked(struct rt2560_softc *sc) 2651 { 2652 volatile int *flags = &sc->sc_flags; 2653 2654 RAL_LOCK_ASSERT(sc); 2655 2656 while (*flags & RT2560_F_INPUT_RUNNING) 2657 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2658 2659 callout_stop(&sc->watchdog_ch); 2660 sc->sc_tx_timer = 0; 2661 2662 if (sc->sc_flags & RT2560_F_RUNNING) { 2663 sc->sc_flags &= ~RT2560_F_RUNNING; 2664 2665 /* abort Tx */ 2666 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_ABORT_TX); 2667 2668 /* disable Rx */ 2669 RAL_WRITE(sc, RT2560_RXCSR0, RT2560_DISABLE_RX); 2670 2671 /* reset ASIC (imply reset BBP) */ 2672 RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC); 2673 RAL_WRITE(sc, RT2560_CSR1, 0); 2674 2675 /* disable interrupts */ 2676 RAL_WRITE(sc, RT2560_CSR8, 0xffffffff); 2677 2678 /* reset Tx and Rx rings */ 2679 rt2560_reset_tx_ring(sc, &sc->txq); 2680 rt2560_reset_tx_ring(sc, &sc->atimq); 2681 rt2560_reset_tx_ring(sc, &sc->prioq); 2682 rt2560_reset_tx_ring(sc, &sc->bcnq); 2683 rt2560_reset_rx_ring(sc, &sc->rxq); 2684 } 2685 } 2686 2687 void 2688 rt2560_stop(void *arg) 2689 { 2690 struct rt2560_softc *sc = arg; 2691 2692 RAL_LOCK(sc); 2693 rt2560_stop_locked(sc); 2694 RAL_UNLOCK(sc); 2695 } 2696 2697 static int 2698 rt2560_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 2699 const struct ieee80211_bpf_params *params) 2700 { 2701 struct ieee80211com *ic = ni->ni_ic; 2702 struct rt2560_softc *sc = ic->ic_softc; 2703 2704 RAL_LOCK(sc); 2705 2706 /* prevent management frames from being sent if we're not ready */ 2707 if (!(sc->sc_flags & RT2560_F_RUNNING)) { 2708 RAL_UNLOCK(sc); 2709 m_freem(m); 2710 return ENETDOWN; 2711 } 2712 if (sc->prioq.queued >= RT2560_PRIO_RING_COUNT) { 2713 RAL_UNLOCK(sc); 2714 m_freem(m); 2715 return ENOBUFS; /* XXX */ 2716 } 2717 2718 if (params == NULL) { 2719 /* 2720 * Legacy path; interpret frame contents to decide 2721 * precisely how to send the frame. 2722 */ 2723 if (rt2560_tx_mgt(sc, m, ni) != 0) 2724 goto bad; 2725 } else { 2726 /* 2727 * Caller supplied explicit parameters to use in 2728 * sending the frame. 2729 */ 2730 if (rt2560_tx_raw(sc, m, ni, params)) 2731 goto bad; 2732 } 2733 sc->sc_tx_timer = 5; 2734 2735 RAL_UNLOCK(sc); 2736 2737 return 0; 2738 bad: 2739 RAL_UNLOCK(sc); 2740 return EIO; /* XXX */ 2741 } 2742