1 /* $FreeBSD$ */ 2 3 /*- 4 * Copyright (c) 2005, 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 __FBSDID("$FreeBSD$"); 22 23 /*- 24 * Ralink Technology RT2560 chipset driver 25 * http://www.ralinktech.com/ 26 */ 27 28 #include <sys/param.h> 29 #include <sys/sysctl.h> 30 #include <sys/sockio.h> 31 #include <sys/mbuf.h> 32 #include <sys/kernel.h> 33 #include <sys/socket.h> 34 #include <sys/systm.h> 35 #include <sys/malloc.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/module.h> 39 #include <sys/bus.h> 40 #include <sys/endian.h> 41 42 #include <machine/bus.h> 43 #include <machine/resource.h> 44 #include <sys/rman.h> 45 46 #include <net/bpf.h> 47 #include <net/if.h> 48 #include <net/if_var.h> 49 #include <net/if_arp.h> 50 #include <net/ethernet.h> 51 #include <net/if_dl.h> 52 #include <net/if_media.h> 53 #include <net/if_types.h> 54 55 #include <net80211/ieee80211_var.h> 56 #include <net80211/ieee80211_radiotap.h> 57 #include <net80211/ieee80211_regdomain.h> 58 #include <net80211/ieee80211_ratectl.h> 59 60 #include <netinet/in.h> 61 #include <netinet/in_systm.h> 62 #include <netinet/in_var.h> 63 #include <netinet/ip.h> 64 #include <netinet/if_ether.h> 65 66 #include <dev/ral/rt2560reg.h> 67 #include <dev/ral/rt2560var.h> 68 69 #define RT2560_RSSI(sc, rssi) \ 70 ((rssi) > (RT2560_NOISE_FLOOR + (sc)->rssi_corr) ? \ 71 ((rssi) - RT2560_NOISE_FLOOR - (sc)->rssi_corr) : 0) 72 73 #define RAL_DEBUG 74 #ifdef RAL_DEBUG 75 #define DPRINTF(sc, fmt, ...) do { \ 76 if (sc->sc_debug > 0) \ 77 printf(fmt, __VA_ARGS__); \ 78 } while (0) 79 #define DPRINTFN(sc, n, fmt, ...) do { \ 80 if (sc->sc_debug >= (n)) \ 81 printf(fmt, __VA_ARGS__); \ 82 } while (0) 83 #else 84 #define DPRINTF(sc, fmt, ...) 85 #define DPRINTFN(sc, n, fmt, ...) 86 #endif 87 88 static struct ieee80211vap *rt2560_vap_create(struct ieee80211com *, 89 const char [IFNAMSIZ], int, enum ieee80211_opmode, 90 int, const uint8_t [IEEE80211_ADDR_LEN], 91 const uint8_t [IEEE80211_ADDR_LEN]); 92 static void rt2560_vap_delete(struct ieee80211vap *); 93 static void rt2560_dma_map_addr(void *, bus_dma_segment_t *, int, 94 int); 95 static int rt2560_alloc_tx_ring(struct rt2560_softc *, 96 struct rt2560_tx_ring *, int); 97 static void rt2560_reset_tx_ring(struct rt2560_softc *, 98 struct rt2560_tx_ring *); 99 static void rt2560_free_tx_ring(struct rt2560_softc *, 100 struct rt2560_tx_ring *); 101 static int rt2560_alloc_rx_ring(struct rt2560_softc *, 102 struct rt2560_rx_ring *, int); 103 static void rt2560_reset_rx_ring(struct rt2560_softc *, 104 struct rt2560_rx_ring *); 105 static void rt2560_free_rx_ring(struct rt2560_softc *, 106 struct rt2560_rx_ring *); 107 static int rt2560_newstate(struct ieee80211vap *, 108 enum ieee80211_state, int); 109 static uint16_t rt2560_eeprom_read(struct rt2560_softc *, uint8_t); 110 static void rt2560_encryption_intr(struct rt2560_softc *); 111 static void rt2560_tx_intr(struct rt2560_softc *); 112 static void rt2560_prio_intr(struct rt2560_softc *); 113 static void rt2560_decryption_intr(struct rt2560_softc *); 114 static void rt2560_rx_intr(struct rt2560_softc *); 115 static void rt2560_beacon_update(struct ieee80211vap *, int item); 116 static void rt2560_beacon_expire(struct rt2560_softc *); 117 static void rt2560_wakeup_expire(struct rt2560_softc *); 118 static void rt2560_scan_start(struct ieee80211com *); 119 static void rt2560_scan_end(struct ieee80211com *); 120 static void rt2560_getradiocaps(struct ieee80211com *, int, int *, 121 struct ieee80211_channel[]); 122 static void rt2560_set_channel(struct ieee80211com *); 123 static void rt2560_setup_tx_desc(struct rt2560_softc *, 124 struct rt2560_tx_desc *, uint32_t, int, int, int, 125 bus_addr_t); 126 static int rt2560_tx_bcn(struct rt2560_softc *, struct mbuf *, 127 struct ieee80211_node *); 128 static int rt2560_tx_mgt(struct rt2560_softc *, struct mbuf *, 129 struct ieee80211_node *); 130 static int rt2560_tx_data(struct rt2560_softc *, struct mbuf *, 131 struct ieee80211_node *); 132 static int rt2560_transmit(struct ieee80211com *, struct mbuf *); 133 static void rt2560_start(struct rt2560_softc *); 134 static void rt2560_watchdog(void *); 135 static void rt2560_parent(struct ieee80211com *); 136 static void rt2560_bbp_write(struct rt2560_softc *, uint8_t, 137 uint8_t); 138 static uint8_t rt2560_bbp_read(struct rt2560_softc *, uint8_t); 139 static void rt2560_rf_write(struct rt2560_softc *, uint8_t, 140 uint32_t); 141 static void rt2560_set_chan(struct rt2560_softc *, 142 struct ieee80211_channel *); 143 #if 0 144 static void rt2560_disable_rf_tune(struct rt2560_softc *); 145 #endif 146 static void rt2560_enable_tsf_sync(struct rt2560_softc *); 147 static void rt2560_enable_tsf(struct rt2560_softc *); 148 static void rt2560_update_plcp(struct rt2560_softc *); 149 static void rt2560_update_slot(struct ieee80211com *); 150 static void rt2560_set_basicrates(struct rt2560_softc *, 151 const struct ieee80211_rateset *); 152 static void rt2560_update_led(struct rt2560_softc *, int, int); 153 static void rt2560_set_bssid(struct rt2560_softc *, const uint8_t *); 154 static void rt2560_set_macaddr(struct rt2560_softc *, 155 const uint8_t *); 156 static void rt2560_get_macaddr(struct rt2560_softc *, uint8_t *); 157 static void rt2560_update_promisc(struct ieee80211com *); 158 static const char *rt2560_get_rf(int); 159 static void rt2560_read_config(struct rt2560_softc *); 160 static int rt2560_bbp_init(struct rt2560_softc *); 161 static void rt2560_set_txantenna(struct rt2560_softc *, int); 162 static void rt2560_set_rxantenna(struct rt2560_softc *, int); 163 static void rt2560_init_locked(struct rt2560_softc *); 164 static void rt2560_init(void *); 165 static void rt2560_stop_locked(struct rt2560_softc *); 166 static int rt2560_raw_xmit(struct ieee80211_node *, struct mbuf *, 167 const struct ieee80211_bpf_params *); 168 169 static const struct { 170 uint32_t reg; 171 uint32_t val; 172 } rt2560_def_mac[] = { 173 RT2560_DEF_MAC 174 }; 175 176 static const struct { 177 uint8_t reg; 178 uint8_t val; 179 } rt2560_def_bbp[] = { 180 RT2560_DEF_BBP 181 }; 182 183 static const uint32_t rt2560_rf2522_r2[] = RT2560_RF2522_R2; 184 static const uint32_t rt2560_rf2523_r2[] = RT2560_RF2523_R2; 185 static const uint32_t rt2560_rf2524_r2[] = RT2560_RF2524_R2; 186 static const uint32_t rt2560_rf2525_r2[] = RT2560_RF2525_R2; 187 static const uint32_t rt2560_rf2525_hi_r2[] = RT2560_RF2525_HI_R2; 188 static const uint32_t rt2560_rf2525e_r2[] = RT2560_RF2525E_R2; 189 static const uint32_t rt2560_rf2526_r2[] = RT2560_RF2526_R2; 190 static const uint32_t rt2560_rf2526_hi_r2[] = RT2560_RF2526_HI_R2; 191 192 static const uint8_t rt2560_chan_2ghz[] = 193 { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }; 194 195 static const uint8_t rt2560_chan_5ghz[] = 196 { 36, 40, 44, 48, 52, 56, 60, 64, 197 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 198 149, 153, 157, 161 }; 199 200 static const struct { 201 uint8_t chan; 202 uint32_t r1, r2, r4; 203 } rt2560_rf5222[] = { 204 RT2560_RF5222 205 }; 206 207 int 208 rt2560_attach(device_t dev, int id) 209 { 210 struct rt2560_softc *sc = device_get_softc(dev); 211 struct ieee80211com *ic = &sc->sc_ic; 212 int error; 213 214 sc->sc_dev = dev; 215 216 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 217 MTX_DEF | MTX_RECURSE); 218 219 callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); 220 mbufq_init(&sc->sc_snd, ifqmaxlen); 221 222 /* retrieve RT2560 rev. no */ 223 sc->asic_rev = RAL_READ(sc, RT2560_CSR0); 224 225 /* retrieve RF rev. no and various other things from EEPROM */ 226 rt2560_read_config(sc); 227 228 device_printf(dev, "MAC/BBP RT2560 (rev 0x%02x), RF %s\n", 229 sc->asic_rev, rt2560_get_rf(sc->rf_rev)); 230 231 /* 232 * Allocate Tx and Rx rings. 233 */ 234 error = rt2560_alloc_tx_ring(sc, &sc->txq, RT2560_TX_RING_COUNT); 235 if (error != 0) { 236 device_printf(sc->sc_dev, "could not allocate Tx ring\n"); 237 goto fail1; 238 } 239 240 error = rt2560_alloc_tx_ring(sc, &sc->atimq, RT2560_ATIM_RING_COUNT); 241 if (error != 0) { 242 device_printf(sc->sc_dev, "could not allocate ATIM ring\n"); 243 goto fail2; 244 } 245 246 error = rt2560_alloc_tx_ring(sc, &sc->prioq, RT2560_PRIO_RING_COUNT); 247 if (error != 0) { 248 device_printf(sc->sc_dev, "could not allocate Prio ring\n"); 249 goto fail3; 250 } 251 252 error = rt2560_alloc_tx_ring(sc, &sc->bcnq, RT2560_BEACON_RING_COUNT); 253 if (error != 0) { 254 device_printf(sc->sc_dev, "could not allocate Beacon ring\n"); 255 goto fail4; 256 } 257 258 error = rt2560_alloc_rx_ring(sc, &sc->rxq, RT2560_RX_RING_COUNT); 259 if (error != 0) { 260 device_printf(sc->sc_dev, "could not allocate Rx ring\n"); 261 goto fail5; 262 } 263 264 /* retrieve MAC address */ 265 rt2560_get_macaddr(sc, ic->ic_macaddr); 266 267 ic->ic_softc = sc; 268 ic->ic_name = device_get_nameunit(dev); 269 ic->ic_opmode = IEEE80211_M_STA; 270 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 271 272 /* set device capabilities */ 273 ic->ic_caps = 274 IEEE80211_C_STA /* station mode */ 275 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ 276 | IEEE80211_C_HOSTAP /* hostap mode */ 277 | IEEE80211_C_MONITOR /* monitor mode */ 278 | IEEE80211_C_AHDEMO /* adhoc demo mode */ 279 | IEEE80211_C_WDS /* 4-address traffic works */ 280 | IEEE80211_C_MBSS /* mesh point link mode */ 281 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 282 | IEEE80211_C_SHSLOT /* short slot time supported */ 283 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ 284 | IEEE80211_C_BGSCAN /* capable of bg scanning */ 285 #ifdef notyet 286 | IEEE80211_C_TXFRAG /* handle tx frags */ 287 #endif 288 ; 289 290 rt2560_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 291 ic->ic_channels); 292 293 ieee80211_ifattach(ic); 294 ic->ic_raw_xmit = rt2560_raw_xmit; 295 ic->ic_updateslot = rt2560_update_slot; 296 ic->ic_update_promisc = rt2560_update_promisc; 297 ic->ic_scan_start = rt2560_scan_start; 298 ic->ic_scan_end = rt2560_scan_end; 299 ic->ic_getradiocaps = rt2560_getradiocaps; 300 ic->ic_set_channel = rt2560_set_channel; 301 302 ic->ic_vap_create = rt2560_vap_create; 303 ic->ic_vap_delete = rt2560_vap_delete; 304 ic->ic_parent = rt2560_parent; 305 ic->ic_transmit = rt2560_transmit; 306 307 ieee80211_radiotap_attach(ic, 308 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 309 RT2560_TX_RADIOTAP_PRESENT, 310 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 311 RT2560_RX_RADIOTAP_PRESENT); 312 313 /* 314 * Add a few sysctl knobs. 315 */ 316 #ifdef RAL_DEBUG 317 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 318 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 319 "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); 320 #endif 321 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 322 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 323 "txantenna", CTLFLAG_RW, &sc->tx_ant, 0, "tx antenna (0=auto)"); 324 325 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 326 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, 327 "rxantenna", CTLFLAG_RW, &sc->rx_ant, 0, "rx antenna (0=auto)"); 328 329 if (bootverbose) 330 ieee80211_announce(ic); 331 332 return 0; 333 334 fail5: rt2560_free_tx_ring(sc, &sc->bcnq); 335 fail4: rt2560_free_tx_ring(sc, &sc->prioq); 336 fail3: rt2560_free_tx_ring(sc, &sc->atimq); 337 fail2: rt2560_free_tx_ring(sc, &sc->txq); 338 fail1: mtx_destroy(&sc->sc_mtx); 339 340 return ENXIO; 341 } 342 343 int 344 rt2560_detach(void *xsc) 345 { 346 struct rt2560_softc *sc = xsc; 347 struct ieee80211com *ic = &sc->sc_ic; 348 349 rt2560_stop(sc); 350 351 ieee80211_ifdetach(ic); 352 mbufq_drain(&sc->sc_snd); 353 354 rt2560_free_tx_ring(sc, &sc->txq); 355 rt2560_free_tx_ring(sc, &sc->atimq); 356 rt2560_free_tx_ring(sc, &sc->prioq); 357 rt2560_free_tx_ring(sc, &sc->bcnq); 358 rt2560_free_rx_ring(sc, &sc->rxq); 359 360 mtx_destroy(&sc->sc_mtx); 361 362 return 0; 363 } 364 365 static struct ieee80211vap * 366 rt2560_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 367 enum ieee80211_opmode opmode, int flags, 368 const uint8_t bssid[IEEE80211_ADDR_LEN], 369 const uint8_t mac[IEEE80211_ADDR_LEN]) 370 { 371 struct rt2560_softc *sc = ic->ic_softc; 372 struct rt2560_vap *rvp; 373 struct ieee80211vap *vap; 374 375 switch (opmode) { 376 case IEEE80211_M_STA: 377 case IEEE80211_M_IBSS: 378 case IEEE80211_M_AHDEMO: 379 case IEEE80211_M_MONITOR: 380 case IEEE80211_M_HOSTAP: 381 case IEEE80211_M_MBSS: 382 /* XXXRP: TBD */ 383 if (!TAILQ_EMPTY(&ic->ic_vaps)) { 384 device_printf(sc->sc_dev, "only 1 vap supported\n"); 385 return NULL; 386 } 387 if (opmode == IEEE80211_M_STA) 388 flags |= IEEE80211_CLONE_NOBEACONS; 389 break; 390 case IEEE80211_M_WDS: 391 if (TAILQ_EMPTY(&ic->ic_vaps) || 392 ic->ic_opmode != IEEE80211_M_HOSTAP) { 393 device_printf(sc->sc_dev, 394 "wds only supported in ap mode\n"); 395 return NULL; 396 } 397 /* 398 * Silently remove any request for a unique 399 * bssid; WDS vap's always share the local 400 * mac address. 401 */ 402 flags &= ~IEEE80211_CLONE_BSSID; 403 break; 404 default: 405 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 406 return NULL; 407 } 408 rvp = malloc(sizeof(struct rt2560_vap), M_80211_VAP, M_WAITOK | M_ZERO); 409 vap = &rvp->ral_vap; 410 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 411 412 /* override state transition machine */ 413 rvp->ral_newstate = vap->iv_newstate; 414 vap->iv_newstate = rt2560_newstate; 415 vap->iv_update_beacon = rt2560_beacon_update; 416 417 ieee80211_ratectl_init(vap); 418 /* complete setup */ 419 ieee80211_vap_attach(vap, ieee80211_media_change, 420 ieee80211_media_status, mac); 421 if (TAILQ_FIRST(&ic->ic_vaps) == vap) 422 ic->ic_opmode = opmode; 423 return vap; 424 } 425 426 static void 427 rt2560_vap_delete(struct ieee80211vap *vap) 428 { 429 struct rt2560_vap *rvp = RT2560_VAP(vap); 430 431 ieee80211_ratectl_deinit(vap); 432 ieee80211_vap_detach(vap); 433 free(rvp, M_80211_VAP); 434 } 435 436 void 437 rt2560_resume(void *xsc) 438 { 439 struct rt2560_softc *sc = xsc; 440 441 if (sc->sc_ic.ic_nrunning > 0) 442 rt2560_init(sc); 443 } 444 445 static void 446 rt2560_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 447 { 448 if (error != 0) 449 return; 450 451 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 452 453 *(bus_addr_t *)arg = segs[0].ds_addr; 454 } 455 456 static int 457 rt2560_alloc_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring, 458 int count) 459 { 460 int i, error; 461 462 ring->count = count; 463 ring->queued = 0; 464 ring->cur = ring->next = 0; 465 ring->cur_encrypt = ring->next_encrypt = 0; 466 467 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 468 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 469 count * RT2560_TX_DESC_SIZE, 1, count * RT2560_TX_DESC_SIZE, 470 0, NULL, NULL, &ring->desc_dmat); 471 if (error != 0) { 472 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 473 goto fail; 474 } 475 476 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 477 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 478 if (error != 0) { 479 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 480 goto fail; 481 } 482 483 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 484 count * RT2560_TX_DESC_SIZE, rt2560_dma_map_addr, &ring->physaddr, 485 0); 486 if (error != 0) { 487 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 488 goto fail; 489 } 490 491 ring->data = malloc(count * sizeof (struct rt2560_tx_data), M_DEVBUF, 492 M_NOWAIT | M_ZERO); 493 if (ring->data == NULL) { 494 device_printf(sc->sc_dev, "could not allocate soft data\n"); 495 error = ENOMEM; 496 goto fail; 497 } 498 499 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 500 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 501 MCLBYTES, RT2560_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, 502 &ring->data_dmat); 503 if (error != 0) { 504 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 505 goto fail; 506 } 507 508 for (i = 0; i < count; i++) { 509 error = bus_dmamap_create(ring->data_dmat, 0, 510 &ring->data[i].map); 511 if (error != 0) { 512 device_printf(sc->sc_dev, "could not create DMA map\n"); 513 goto fail; 514 } 515 } 516 517 return 0; 518 519 fail: rt2560_free_tx_ring(sc, ring); 520 return error; 521 } 522 523 static void 524 rt2560_reset_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring) 525 { 526 struct rt2560_tx_desc *desc; 527 struct rt2560_tx_data *data; 528 int i; 529 530 for (i = 0; i < ring->count; i++) { 531 desc = &ring->desc[i]; 532 data = &ring->data[i]; 533 534 if (data->m != NULL) { 535 bus_dmamap_sync(ring->data_dmat, data->map, 536 BUS_DMASYNC_POSTWRITE); 537 bus_dmamap_unload(ring->data_dmat, data->map); 538 m_freem(data->m); 539 data->m = NULL; 540 } 541 542 if (data->ni != NULL) { 543 ieee80211_free_node(data->ni); 544 data->ni = NULL; 545 } 546 547 desc->flags = 0; 548 } 549 550 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 551 552 ring->queued = 0; 553 ring->cur = ring->next = 0; 554 ring->cur_encrypt = ring->next_encrypt = 0; 555 } 556 557 static void 558 rt2560_free_tx_ring(struct rt2560_softc *sc, struct rt2560_tx_ring *ring) 559 { 560 struct rt2560_tx_data *data; 561 int i; 562 563 if (ring->desc != NULL) { 564 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 565 BUS_DMASYNC_POSTWRITE); 566 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 567 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 568 } 569 570 if (ring->desc_dmat != NULL) 571 bus_dma_tag_destroy(ring->desc_dmat); 572 573 if (ring->data != NULL) { 574 for (i = 0; i < ring->count; i++) { 575 data = &ring->data[i]; 576 577 if (data->m != NULL) { 578 bus_dmamap_sync(ring->data_dmat, data->map, 579 BUS_DMASYNC_POSTWRITE); 580 bus_dmamap_unload(ring->data_dmat, data->map); 581 m_freem(data->m); 582 } 583 584 if (data->ni != NULL) 585 ieee80211_free_node(data->ni); 586 587 if (data->map != NULL) 588 bus_dmamap_destroy(ring->data_dmat, data->map); 589 } 590 591 free(ring->data, M_DEVBUF); 592 } 593 594 if (ring->data_dmat != NULL) 595 bus_dma_tag_destroy(ring->data_dmat); 596 } 597 598 static int 599 rt2560_alloc_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring, 600 int count) 601 { 602 struct rt2560_rx_desc *desc; 603 struct rt2560_rx_data *data; 604 bus_addr_t physaddr; 605 int i, error; 606 607 ring->count = count; 608 ring->cur = ring->next = 0; 609 ring->cur_decrypt = 0; 610 611 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, 612 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 613 count * RT2560_RX_DESC_SIZE, 1, count * RT2560_RX_DESC_SIZE, 614 0, NULL, NULL, &ring->desc_dmat); 615 if (error != 0) { 616 device_printf(sc->sc_dev, "could not create desc DMA tag\n"); 617 goto fail; 618 } 619 620 error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, 621 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); 622 if (error != 0) { 623 device_printf(sc->sc_dev, "could not allocate DMA memory\n"); 624 goto fail; 625 } 626 627 error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, 628 count * RT2560_RX_DESC_SIZE, rt2560_dma_map_addr, &ring->physaddr, 629 0); 630 if (error != 0) { 631 device_printf(sc->sc_dev, "could not load desc DMA map\n"); 632 goto fail; 633 } 634 635 ring->data = malloc(count * sizeof (struct rt2560_rx_data), M_DEVBUF, 636 M_NOWAIT | M_ZERO); 637 if (ring->data == NULL) { 638 device_printf(sc->sc_dev, "could not allocate soft data\n"); 639 error = ENOMEM; 640 goto fail; 641 } 642 643 /* 644 * Pre-allocate Rx buffers and populate Rx ring. 645 */ 646 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 647 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 648 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 649 if (error != 0) { 650 device_printf(sc->sc_dev, "could not create data DMA tag\n"); 651 goto fail; 652 } 653 654 for (i = 0; i < count; i++) { 655 desc = &sc->rxq.desc[i]; 656 data = &sc->rxq.data[i]; 657 658 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 659 if (error != 0) { 660 device_printf(sc->sc_dev, "could not create DMA map\n"); 661 goto fail; 662 } 663 664 data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 665 if (data->m == NULL) { 666 device_printf(sc->sc_dev, 667 "could not allocate rx mbuf\n"); 668 error = ENOMEM; 669 goto fail; 670 } 671 672 error = bus_dmamap_load(ring->data_dmat, data->map, 673 mtod(data->m, void *), MCLBYTES, rt2560_dma_map_addr, 674 &physaddr, 0); 675 if (error != 0) { 676 device_printf(sc->sc_dev, 677 "could not load rx buf DMA map"); 678 goto fail; 679 } 680 681 desc->flags = htole32(RT2560_RX_BUSY); 682 desc->physaddr = htole32(physaddr); 683 } 684 685 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 686 687 return 0; 688 689 fail: rt2560_free_rx_ring(sc, ring); 690 return error; 691 } 692 693 static void 694 rt2560_reset_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring) 695 { 696 int i; 697 698 for (i = 0; i < ring->count; i++) { 699 ring->desc[i].flags = htole32(RT2560_RX_BUSY); 700 ring->data[i].drop = 0; 701 } 702 703 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); 704 705 ring->cur = ring->next = 0; 706 ring->cur_decrypt = 0; 707 } 708 709 static void 710 rt2560_free_rx_ring(struct rt2560_softc *sc, struct rt2560_rx_ring *ring) 711 { 712 struct rt2560_rx_data *data; 713 int i; 714 715 if (ring->desc != NULL) { 716 bus_dmamap_sync(ring->desc_dmat, ring->desc_map, 717 BUS_DMASYNC_POSTWRITE); 718 bus_dmamap_unload(ring->desc_dmat, ring->desc_map); 719 bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); 720 } 721 722 if (ring->desc_dmat != NULL) 723 bus_dma_tag_destroy(ring->desc_dmat); 724 725 if (ring->data != NULL) { 726 for (i = 0; i < ring->count; i++) { 727 data = &ring->data[i]; 728 729 if (data->m != NULL) { 730 bus_dmamap_sync(ring->data_dmat, data->map, 731 BUS_DMASYNC_POSTREAD); 732 bus_dmamap_unload(ring->data_dmat, data->map); 733 m_freem(data->m); 734 } 735 736 if (data->map != NULL) 737 bus_dmamap_destroy(ring->data_dmat, data->map); 738 } 739 740 free(ring->data, M_DEVBUF); 741 } 742 743 if (ring->data_dmat != NULL) 744 bus_dma_tag_destroy(ring->data_dmat); 745 } 746 747 static int 748 rt2560_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 749 { 750 struct rt2560_vap *rvp = RT2560_VAP(vap); 751 struct rt2560_softc *sc = vap->iv_ic->ic_softc; 752 int error; 753 754 if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { 755 /* abort TSF synchronization */ 756 RAL_WRITE(sc, RT2560_CSR14, 0); 757 758 /* turn association led off */ 759 rt2560_update_led(sc, 0, 0); 760 } 761 762 error = rvp->ral_newstate(vap, nstate, arg); 763 764 if (error == 0 && nstate == IEEE80211_S_RUN) { 765 struct ieee80211_node *ni = vap->iv_bss; 766 struct mbuf *m; 767 768 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 769 rt2560_update_plcp(sc); 770 rt2560_set_basicrates(sc, &ni->ni_rates); 771 rt2560_set_bssid(sc, ni->ni_bssid); 772 } 773 774 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 775 vap->iv_opmode == IEEE80211_M_IBSS || 776 vap->iv_opmode == IEEE80211_M_MBSS) { 777 m = ieee80211_beacon_alloc(ni); 778 if (m == NULL) { 779 device_printf(sc->sc_dev, 780 "could not allocate beacon\n"); 781 return ENOBUFS; 782 } 783 ieee80211_ref_node(ni); 784 error = rt2560_tx_bcn(sc, m, ni); 785 if (error != 0) 786 return error; 787 } 788 789 /* turn association led on */ 790 rt2560_update_led(sc, 1, 0); 791 792 if (vap->iv_opmode != IEEE80211_M_MONITOR) 793 rt2560_enable_tsf_sync(sc); 794 else 795 rt2560_enable_tsf(sc); 796 } 797 return error; 798 } 799 800 /* 801 * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or 802 * 93C66). 803 */ 804 static uint16_t 805 rt2560_eeprom_read(struct rt2560_softc *sc, uint8_t addr) 806 { 807 uint32_t tmp; 808 uint16_t val; 809 int n; 810 811 /* clock C once before the first command */ 812 RT2560_EEPROM_CTL(sc, 0); 813 814 RT2560_EEPROM_CTL(sc, RT2560_S); 815 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 816 RT2560_EEPROM_CTL(sc, RT2560_S); 817 818 /* write start bit (1) */ 819 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D); 820 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C); 821 822 /* write READ opcode (10) */ 823 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D); 824 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_D | RT2560_C); 825 RT2560_EEPROM_CTL(sc, RT2560_S); 826 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 827 828 /* write address (A5-A0 or A7-A0) */ 829 n = (RAL_READ(sc, RT2560_CSR21) & RT2560_93C46) ? 5 : 7; 830 for (; n >= 0; n--) { 831 RT2560_EEPROM_CTL(sc, RT2560_S | 832 (((addr >> n) & 1) << RT2560_SHIFT_D)); 833 RT2560_EEPROM_CTL(sc, RT2560_S | 834 (((addr >> n) & 1) << RT2560_SHIFT_D) | RT2560_C); 835 } 836 837 RT2560_EEPROM_CTL(sc, RT2560_S); 838 839 /* read data Q15-Q0 */ 840 val = 0; 841 for (n = 15; n >= 0; n--) { 842 RT2560_EEPROM_CTL(sc, RT2560_S | RT2560_C); 843 tmp = RAL_READ(sc, RT2560_CSR21); 844 val |= ((tmp & RT2560_Q) >> RT2560_SHIFT_Q) << n; 845 RT2560_EEPROM_CTL(sc, RT2560_S); 846 } 847 848 RT2560_EEPROM_CTL(sc, 0); 849 850 /* clear Chip Select and clock C */ 851 RT2560_EEPROM_CTL(sc, RT2560_S); 852 RT2560_EEPROM_CTL(sc, 0); 853 RT2560_EEPROM_CTL(sc, RT2560_C); 854 855 return val; 856 } 857 858 /* 859 * Some frames were processed by the hardware cipher engine and are ready for 860 * transmission. 861 */ 862 static void 863 rt2560_encryption_intr(struct rt2560_softc *sc) 864 { 865 struct rt2560_tx_desc *desc; 866 int hw; 867 868 /* retrieve last descriptor index processed by cipher engine */ 869 hw = RAL_READ(sc, RT2560_SECCSR1) - sc->txq.physaddr; 870 hw /= RT2560_TX_DESC_SIZE; 871 872 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 873 BUS_DMASYNC_POSTREAD); 874 875 while (sc->txq.next_encrypt != hw) { 876 if (sc->txq.next_encrypt == sc->txq.cur_encrypt) { 877 printf("hw encrypt %d, cur_encrypt %d\n", hw, 878 sc->txq.cur_encrypt); 879 break; 880 } 881 882 desc = &sc->txq.desc[sc->txq.next_encrypt]; 883 884 if ((le32toh(desc->flags) & RT2560_TX_BUSY) || 885 (le32toh(desc->flags) & RT2560_TX_CIPHER_BUSY)) 886 break; 887 888 /* for TKIP, swap eiv field to fix a bug in ASIC */ 889 if ((le32toh(desc->flags) & RT2560_TX_CIPHER_MASK) == 890 RT2560_TX_CIPHER_TKIP) 891 desc->eiv = bswap32(desc->eiv); 892 893 /* mark the frame ready for transmission */ 894 desc->flags |= htole32(RT2560_TX_VALID); 895 desc->flags |= htole32(RT2560_TX_BUSY); 896 897 DPRINTFN(sc, 15, "encryption done idx=%u\n", 898 sc->txq.next_encrypt); 899 900 sc->txq.next_encrypt = 901 (sc->txq.next_encrypt + 1) % RT2560_TX_RING_COUNT; 902 } 903 904 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 905 BUS_DMASYNC_PREWRITE); 906 907 /* kick Tx */ 908 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_TX); 909 } 910 911 static void 912 rt2560_tx_intr(struct rt2560_softc *sc) 913 { 914 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs; 915 struct rt2560_tx_desc *desc; 916 struct rt2560_tx_data *data; 917 struct mbuf *m; 918 struct ieee80211_node *ni; 919 uint32_t flags; 920 int status; 921 922 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 923 BUS_DMASYNC_POSTREAD); 924 925 txs->flags = IEEE80211_RATECTL_STATUS_LONG_RETRY; 926 for (;;) { 927 desc = &sc->txq.desc[sc->txq.next]; 928 data = &sc->txq.data[sc->txq.next]; 929 930 flags = le32toh(desc->flags); 931 if ((flags & RT2560_TX_BUSY) || 932 (flags & RT2560_TX_CIPHER_BUSY) || 933 !(flags & RT2560_TX_VALID)) 934 break; 935 936 m = data->m; 937 ni = data->ni; 938 939 switch (flags & RT2560_TX_RESULT_MASK) { 940 case RT2560_TX_SUCCESS: 941 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 942 txs->long_retries = 0; 943 944 DPRINTFN(sc, 10, "%s\n", "data frame sent successfully"); 945 if (data->rix != IEEE80211_FIXED_RATE_NONE) 946 ieee80211_ratectl_tx_complete(ni, txs); 947 status = 0; 948 break; 949 950 case RT2560_TX_SUCCESS_RETRY: 951 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 952 txs->long_retries = RT2560_TX_RETRYCNT(flags); 953 954 DPRINTFN(sc, 9, "data frame sent after %u retries\n", 955 txs->long_retries); 956 if (data->rix != IEEE80211_FIXED_RATE_NONE) 957 ieee80211_ratectl_tx_complete(ni, txs); 958 status = 0; 959 break; 960 961 case RT2560_TX_FAIL_RETRY: 962 txs->status = IEEE80211_RATECTL_TX_FAIL_LONG; 963 txs->long_retries = RT2560_TX_RETRYCNT(flags); 964 965 DPRINTFN(sc, 9, "data frame failed after %d retries\n", 966 txs->long_retries); 967 if (data->rix != IEEE80211_FIXED_RATE_NONE) 968 ieee80211_ratectl_tx_complete(ni, txs); 969 status = 1; 970 break; 971 972 case RT2560_TX_FAIL_INVALID: 973 case RT2560_TX_FAIL_OTHER: 974 default: 975 device_printf(sc->sc_dev, "sending data frame failed " 976 "0x%08x\n", flags); 977 status = 1; 978 } 979 980 bus_dmamap_sync(sc->txq.data_dmat, data->map, 981 BUS_DMASYNC_POSTWRITE); 982 bus_dmamap_unload(sc->txq.data_dmat, data->map); 983 984 ieee80211_tx_complete(ni, m, status); 985 data->ni = NULL; 986 data->m = NULL; 987 988 /* descriptor is no longer valid */ 989 desc->flags &= ~htole32(RT2560_TX_VALID); 990 991 DPRINTFN(sc, 15, "tx done idx=%u\n", sc->txq.next); 992 993 sc->txq.queued--; 994 sc->txq.next = (sc->txq.next + 1) % RT2560_TX_RING_COUNT; 995 } 996 997 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 998 BUS_DMASYNC_PREWRITE); 999 1000 if (sc->prioq.queued == 0 && sc->txq.queued == 0) 1001 sc->sc_tx_timer = 0; 1002 1003 if (sc->txq.queued < RT2560_TX_RING_COUNT - 1) 1004 rt2560_start(sc); 1005 } 1006 1007 static void 1008 rt2560_prio_intr(struct rt2560_softc *sc) 1009 { 1010 struct rt2560_tx_desc *desc; 1011 struct rt2560_tx_data *data; 1012 struct ieee80211_node *ni; 1013 struct mbuf *m; 1014 int flags; 1015 1016 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1017 BUS_DMASYNC_POSTREAD); 1018 1019 for (;;) { 1020 desc = &sc->prioq.desc[sc->prioq.next]; 1021 data = &sc->prioq.data[sc->prioq.next]; 1022 1023 flags = le32toh(desc->flags); 1024 if ((flags & RT2560_TX_BUSY) || (flags & RT2560_TX_VALID) == 0) 1025 break; 1026 1027 switch (flags & RT2560_TX_RESULT_MASK) { 1028 case RT2560_TX_SUCCESS: 1029 DPRINTFN(sc, 10, "%s\n", "mgt frame sent successfully"); 1030 break; 1031 1032 case RT2560_TX_SUCCESS_RETRY: 1033 DPRINTFN(sc, 9, "mgt frame sent after %u retries\n", 1034 (flags >> 5) & 0x7); 1035 break; 1036 1037 case RT2560_TX_FAIL_RETRY: 1038 DPRINTFN(sc, 9, "%s\n", 1039 "sending mgt frame failed (too much retries)"); 1040 break; 1041 1042 case RT2560_TX_FAIL_INVALID: 1043 case RT2560_TX_FAIL_OTHER: 1044 default: 1045 device_printf(sc->sc_dev, "sending mgt frame failed " 1046 "0x%08x\n", flags); 1047 break; 1048 } 1049 1050 bus_dmamap_sync(sc->prioq.data_dmat, data->map, 1051 BUS_DMASYNC_POSTWRITE); 1052 bus_dmamap_unload(sc->prioq.data_dmat, data->map); 1053 1054 m = data->m; 1055 data->m = NULL; 1056 ni = data->ni; 1057 data->ni = NULL; 1058 1059 /* descriptor is no longer valid */ 1060 desc->flags &= ~htole32(RT2560_TX_VALID); 1061 1062 DPRINTFN(sc, 15, "prio done idx=%u\n", sc->prioq.next); 1063 1064 sc->prioq.queued--; 1065 sc->prioq.next = (sc->prioq.next + 1) % RT2560_PRIO_RING_COUNT; 1066 1067 if (m->m_flags & M_TXCB) 1068 ieee80211_process_callback(ni, m, 1069 (flags & RT2560_TX_RESULT_MASK) &~ 1070 (RT2560_TX_SUCCESS | RT2560_TX_SUCCESS_RETRY)); 1071 m_freem(m); 1072 ieee80211_free_node(ni); 1073 } 1074 1075 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1076 BUS_DMASYNC_PREWRITE); 1077 1078 if (sc->prioq.queued == 0 && sc->txq.queued == 0) 1079 sc->sc_tx_timer = 0; 1080 1081 if (sc->prioq.queued < RT2560_PRIO_RING_COUNT) 1082 rt2560_start(sc); 1083 } 1084 1085 /* 1086 * Some frames were processed by the hardware cipher engine and are ready for 1087 * handoff to the IEEE802.11 layer. 1088 */ 1089 static void 1090 rt2560_decryption_intr(struct rt2560_softc *sc) 1091 { 1092 struct ieee80211com *ic = &sc->sc_ic; 1093 struct rt2560_rx_desc *desc; 1094 struct rt2560_rx_data *data; 1095 bus_addr_t physaddr; 1096 struct ieee80211_frame *wh; 1097 struct ieee80211_node *ni; 1098 struct mbuf *mnew, *m; 1099 int hw, error; 1100 int8_t rssi, nf; 1101 1102 /* retrieve last descriptor index processed by cipher engine */ 1103 hw = RAL_READ(sc, RT2560_SECCSR0) - sc->rxq.physaddr; 1104 hw /= RT2560_RX_DESC_SIZE; 1105 1106 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1107 BUS_DMASYNC_POSTREAD); 1108 1109 for (; sc->rxq.cur_decrypt != hw;) { 1110 desc = &sc->rxq.desc[sc->rxq.cur_decrypt]; 1111 data = &sc->rxq.data[sc->rxq.cur_decrypt]; 1112 1113 if ((le32toh(desc->flags) & RT2560_RX_BUSY) || 1114 (le32toh(desc->flags) & RT2560_RX_CIPHER_BUSY)) 1115 break; 1116 1117 if (data->drop) { 1118 counter_u64_add(ic->ic_ierrors, 1); 1119 goto skip; 1120 } 1121 1122 if ((le32toh(desc->flags) & RT2560_RX_CIPHER_MASK) != 0 && 1123 (le32toh(desc->flags) & RT2560_RX_ICV_ERROR)) { 1124 counter_u64_add(ic->ic_ierrors, 1); 1125 goto skip; 1126 } 1127 1128 /* 1129 * Try to allocate a new mbuf for this ring element and load it 1130 * before processing the current mbuf. If the ring element 1131 * cannot be loaded, drop the received packet and reuse the old 1132 * mbuf. In the unlikely case that the old mbuf can't be 1133 * reloaded either, explicitly panic. 1134 */ 1135 mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1136 if (mnew == NULL) { 1137 counter_u64_add(ic->ic_ierrors, 1); 1138 goto skip; 1139 } 1140 1141 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 1142 BUS_DMASYNC_POSTREAD); 1143 bus_dmamap_unload(sc->rxq.data_dmat, data->map); 1144 1145 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1146 mtod(mnew, void *), MCLBYTES, rt2560_dma_map_addr, 1147 &physaddr, 0); 1148 if (error != 0) { 1149 m_freem(mnew); 1150 1151 /* try to reload the old mbuf */ 1152 error = bus_dmamap_load(sc->rxq.data_dmat, data->map, 1153 mtod(data->m, void *), MCLBYTES, 1154 rt2560_dma_map_addr, &physaddr, 0); 1155 if (error != 0) { 1156 /* very unlikely that it will fail... */ 1157 panic("%s: could not load old rx mbuf", 1158 device_get_name(sc->sc_dev)); 1159 } 1160 counter_u64_add(ic->ic_ierrors, 1); 1161 goto skip; 1162 } 1163 1164 /* 1165 * New mbuf successfully loaded, update Rx ring and continue 1166 * processing. 1167 */ 1168 m = data->m; 1169 data->m = mnew; 1170 desc->physaddr = htole32(physaddr); 1171 1172 /* finalize mbuf */ 1173 m->m_pkthdr.len = m->m_len = 1174 (le32toh(desc->flags) >> 16) & 0xfff; 1175 1176 rssi = RT2560_RSSI(sc, desc->rssi); 1177 nf = RT2560_NOISE_FLOOR; 1178 if (ieee80211_radiotap_active(ic)) { 1179 struct rt2560_rx_radiotap_header *tap = &sc->sc_rxtap; 1180 uint32_t tsf_lo, tsf_hi; 1181 1182 /* get timestamp (low and high 32 bits) */ 1183 tsf_hi = RAL_READ(sc, RT2560_CSR17); 1184 tsf_lo = RAL_READ(sc, RT2560_CSR16); 1185 1186 tap->wr_tsf = 1187 htole64(((uint64_t)tsf_hi << 32) | tsf_lo); 1188 tap->wr_flags = 0; 1189 tap->wr_rate = ieee80211_plcp2rate(desc->rate, 1190 (desc->flags & htole32(RT2560_RX_OFDM)) ? 1191 IEEE80211_T_OFDM : IEEE80211_T_CCK); 1192 tap->wr_antenna = sc->rx_ant; 1193 tap->wr_antsignal = nf + rssi; 1194 tap->wr_antnoise = nf; 1195 } 1196 1197 sc->sc_flags |= RT2560_F_INPUT_RUNNING; 1198 RAL_UNLOCK(sc); 1199 wh = mtod(m, struct ieee80211_frame *); 1200 ni = ieee80211_find_rxnode(ic, 1201 (struct ieee80211_frame_min *)wh); 1202 if (ni != NULL) { 1203 (void) ieee80211_input(ni, m, rssi, nf); 1204 ieee80211_free_node(ni); 1205 } else 1206 (void) ieee80211_input_all(ic, m, rssi, nf); 1207 1208 RAL_LOCK(sc); 1209 sc->sc_flags &= ~RT2560_F_INPUT_RUNNING; 1210 skip: desc->flags = htole32(RT2560_RX_BUSY); 1211 1212 DPRINTFN(sc, 15, "decryption done idx=%u\n", sc->rxq.cur_decrypt); 1213 1214 sc->rxq.cur_decrypt = 1215 (sc->rxq.cur_decrypt + 1) % RT2560_RX_RING_COUNT; 1216 } 1217 1218 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1219 BUS_DMASYNC_PREWRITE); 1220 } 1221 1222 /* 1223 * Some frames were received. Pass them to the hardware cipher engine before 1224 * sending them to the 802.11 layer. 1225 */ 1226 static void 1227 rt2560_rx_intr(struct rt2560_softc *sc) 1228 { 1229 struct rt2560_rx_desc *desc; 1230 struct rt2560_rx_data *data; 1231 1232 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1233 BUS_DMASYNC_POSTREAD); 1234 1235 for (;;) { 1236 desc = &sc->rxq.desc[sc->rxq.cur]; 1237 data = &sc->rxq.data[sc->rxq.cur]; 1238 1239 if ((le32toh(desc->flags) & RT2560_RX_BUSY) || 1240 (le32toh(desc->flags) & RT2560_RX_CIPHER_BUSY)) 1241 break; 1242 1243 data->drop = 0; 1244 1245 if ((le32toh(desc->flags) & RT2560_RX_PHY_ERROR) || 1246 (le32toh(desc->flags) & RT2560_RX_CRC_ERROR)) { 1247 /* 1248 * This should not happen since we did not request 1249 * to receive those frames when we filled RXCSR0. 1250 */ 1251 DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", 1252 le32toh(desc->flags)); 1253 data->drop = 1; 1254 } 1255 1256 if (((le32toh(desc->flags) >> 16) & 0xfff) > MCLBYTES) { 1257 DPRINTFN(sc, 5, "%s\n", "bad length"); 1258 data->drop = 1; 1259 } 1260 1261 /* mark the frame for decryption */ 1262 desc->flags |= htole32(RT2560_RX_CIPHER_BUSY); 1263 1264 DPRINTFN(sc, 15, "rx done idx=%u\n", sc->rxq.cur); 1265 1266 sc->rxq.cur = (sc->rxq.cur + 1) % RT2560_RX_RING_COUNT; 1267 } 1268 1269 bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, 1270 BUS_DMASYNC_PREWRITE); 1271 1272 /* kick decrypt */ 1273 RAL_WRITE(sc, RT2560_SECCSR0, RT2560_KICK_DECRYPT); 1274 } 1275 1276 static void 1277 rt2560_beacon_update(struct ieee80211vap *vap, int item) 1278 { 1279 struct ieee80211_beacon_offsets *bo = &vap->iv_bcn_off; 1280 1281 setbit(bo->bo_flags, item); 1282 } 1283 1284 /* 1285 * This function is called periodically in IBSS mode when a new beacon must be 1286 * sent out. 1287 */ 1288 static void 1289 rt2560_beacon_expire(struct rt2560_softc *sc) 1290 { 1291 struct ieee80211com *ic = &sc->sc_ic; 1292 struct rt2560_tx_data *data; 1293 1294 if (ic->ic_opmode != IEEE80211_M_IBSS && 1295 ic->ic_opmode != IEEE80211_M_HOSTAP && 1296 ic->ic_opmode != IEEE80211_M_MBSS) 1297 return; 1298 1299 data = &sc->bcnq.data[sc->bcnq.next]; 1300 /* 1301 * Don't send beacon if bsschan isn't set 1302 */ 1303 if (data->ni == NULL) 1304 return; 1305 1306 bus_dmamap_sync(sc->bcnq.data_dmat, data->map, BUS_DMASYNC_POSTWRITE); 1307 bus_dmamap_unload(sc->bcnq.data_dmat, data->map); 1308 1309 /* XXX 1 =>'s mcast frames which means all PS sta's will wakeup! */ 1310 ieee80211_beacon_update(data->ni, data->m, 1); 1311 1312 rt2560_tx_bcn(sc, data->m, data->ni); 1313 1314 DPRINTFN(sc, 15, "%s", "beacon expired\n"); 1315 1316 sc->bcnq.next = (sc->bcnq.next + 1) % RT2560_BEACON_RING_COUNT; 1317 } 1318 1319 /* ARGSUSED */ 1320 static void 1321 rt2560_wakeup_expire(struct rt2560_softc *sc) 1322 { 1323 DPRINTFN(sc, 2, "%s", "wakeup expired\n"); 1324 } 1325 1326 void 1327 rt2560_intr(void *arg) 1328 { 1329 struct rt2560_softc *sc = arg; 1330 uint32_t r; 1331 1332 RAL_LOCK(sc); 1333 1334 /* disable interrupts */ 1335 RAL_WRITE(sc, RT2560_CSR8, 0xffffffff); 1336 1337 /* don't re-enable interrupts if we're shutting down */ 1338 if (!(sc->sc_flags & RT2560_F_RUNNING)) { 1339 RAL_UNLOCK(sc); 1340 return; 1341 } 1342 1343 r = RAL_READ(sc, RT2560_CSR7); 1344 RAL_WRITE(sc, RT2560_CSR7, r); 1345 1346 if (r & RT2560_BEACON_EXPIRE) 1347 rt2560_beacon_expire(sc); 1348 1349 if (r & RT2560_WAKEUP_EXPIRE) 1350 rt2560_wakeup_expire(sc); 1351 1352 if (r & RT2560_ENCRYPTION_DONE) 1353 rt2560_encryption_intr(sc); 1354 1355 if (r & RT2560_TX_DONE) 1356 rt2560_tx_intr(sc); 1357 1358 if (r & RT2560_PRIO_DONE) 1359 rt2560_prio_intr(sc); 1360 1361 if (r & RT2560_DECRYPTION_DONE) 1362 rt2560_decryption_intr(sc); 1363 1364 if (r & RT2560_RX_DONE) { 1365 rt2560_rx_intr(sc); 1366 rt2560_encryption_intr(sc); 1367 } 1368 1369 /* re-enable interrupts */ 1370 RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK); 1371 1372 RAL_UNLOCK(sc); 1373 } 1374 1375 #define RAL_SIFS 10 /* us */ 1376 1377 #define RT2560_TXRX_TURNAROUND 10 /* us */ 1378 1379 static uint8_t 1380 rt2560_plcp_signal(int rate) 1381 { 1382 switch (rate) { 1383 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1384 case 12: return 0xb; 1385 case 18: return 0xf; 1386 case 24: return 0xa; 1387 case 36: return 0xe; 1388 case 48: return 0x9; 1389 case 72: return 0xd; 1390 case 96: return 0x8; 1391 case 108: return 0xc; 1392 1393 /* CCK rates (NB: not IEEE std, device-specific) */ 1394 case 2: return 0x0; 1395 case 4: return 0x1; 1396 case 11: return 0x2; 1397 case 22: return 0x3; 1398 } 1399 return 0xff; /* XXX unsupported/unknown rate */ 1400 } 1401 1402 static void 1403 rt2560_setup_tx_desc(struct rt2560_softc *sc, struct rt2560_tx_desc *desc, 1404 uint32_t flags, int len, int rate, int encrypt, bus_addr_t physaddr) 1405 { 1406 struct ieee80211com *ic = &sc->sc_ic; 1407 uint16_t plcp_length; 1408 int remainder; 1409 1410 desc->flags = htole32(flags); 1411 desc->flags |= htole32(len << 16); 1412 1413 desc->physaddr = htole32(physaddr); 1414 desc->wme = htole16( 1415 RT2560_AIFSN(2) | 1416 RT2560_LOGCWMIN(3) | 1417 RT2560_LOGCWMAX(8)); 1418 1419 /* setup PLCP fields */ 1420 desc->plcp_signal = rt2560_plcp_signal(rate); 1421 desc->plcp_service = 4; 1422 1423 len += IEEE80211_CRC_LEN; 1424 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { 1425 desc->flags |= htole32(RT2560_TX_OFDM); 1426 1427 plcp_length = len & 0xfff; 1428 desc->plcp_length_hi = plcp_length >> 6; 1429 desc->plcp_length_lo = plcp_length & 0x3f; 1430 } else { 1431 plcp_length = howmany(16 * len, rate); 1432 if (rate == 22) { 1433 remainder = (16 * len) % 22; 1434 if (remainder != 0 && remainder < 7) 1435 desc->plcp_service |= RT2560_PLCP_LENGEXT; 1436 } 1437 desc->plcp_length_hi = plcp_length >> 8; 1438 desc->plcp_length_lo = plcp_length & 0xff; 1439 1440 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1441 desc->plcp_signal |= 0x08; 1442 } 1443 1444 if (!encrypt) 1445 desc->flags |= htole32(RT2560_TX_VALID); 1446 desc->flags |= encrypt ? htole32(RT2560_TX_CIPHER_BUSY) 1447 : htole32(RT2560_TX_BUSY); 1448 } 1449 1450 static int 1451 rt2560_tx_bcn(struct rt2560_softc *sc, struct mbuf *m0, 1452 struct ieee80211_node *ni) 1453 { 1454 struct ieee80211vap *vap = ni->ni_vap; 1455 struct rt2560_tx_desc *desc; 1456 struct rt2560_tx_data *data; 1457 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1458 int nsegs, rate, error; 1459 1460 desc = &sc->bcnq.desc[sc->bcnq.cur]; 1461 data = &sc->bcnq.data[sc->bcnq.cur]; 1462 1463 /* XXX maybe a separate beacon rate? */ 1464 rate = vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)].mgmtrate; 1465 1466 error = bus_dmamap_load_mbuf_sg(sc->bcnq.data_dmat, data->map, m0, 1467 segs, &nsegs, BUS_DMA_NOWAIT); 1468 if (error != 0) { 1469 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1470 error); 1471 m_freem(m0); 1472 return error; 1473 } 1474 1475 if (ieee80211_radiotap_active_vap(vap)) { 1476 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1477 1478 tap->wt_flags = 0; 1479 tap->wt_rate = rate; 1480 tap->wt_antenna = sc->tx_ant; 1481 1482 ieee80211_radiotap_tx(vap, m0); 1483 } 1484 1485 data->m = m0; 1486 data->ni = ni; 1487 1488 rt2560_setup_tx_desc(sc, desc, RT2560_TX_IFS_NEWBACKOFF | 1489 RT2560_TX_TIMESTAMP, m0->m_pkthdr.len, rate, 0, segs->ds_addr); 1490 1491 DPRINTFN(sc, 10, "sending beacon frame len=%u idx=%u rate=%u\n", 1492 m0->m_pkthdr.len, sc->bcnq.cur, rate); 1493 1494 bus_dmamap_sync(sc->bcnq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1495 bus_dmamap_sync(sc->bcnq.desc_dmat, sc->bcnq.desc_map, 1496 BUS_DMASYNC_PREWRITE); 1497 1498 sc->bcnq.cur = (sc->bcnq.cur + 1) % RT2560_BEACON_RING_COUNT; 1499 1500 return 0; 1501 } 1502 1503 static int 1504 rt2560_tx_mgt(struct rt2560_softc *sc, struct mbuf *m0, 1505 struct ieee80211_node *ni) 1506 { 1507 struct ieee80211vap *vap = ni->ni_vap; 1508 struct ieee80211com *ic = ni->ni_ic; 1509 struct rt2560_tx_desc *desc; 1510 struct rt2560_tx_data *data; 1511 struct ieee80211_frame *wh; 1512 struct ieee80211_key *k; 1513 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1514 uint16_t dur; 1515 uint32_t flags = 0; 1516 int nsegs, rate, error; 1517 1518 desc = &sc->prioq.desc[sc->prioq.cur]; 1519 data = &sc->prioq.data[sc->prioq.cur]; 1520 1521 rate = ni->ni_txparms->mgmtrate; 1522 1523 wh = mtod(m0, struct ieee80211_frame *); 1524 1525 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1526 k = ieee80211_crypto_encap(ni, m0); 1527 if (k == NULL) { 1528 m_freem(m0); 1529 return ENOBUFS; 1530 } 1531 } 1532 1533 error = bus_dmamap_load_mbuf_sg(sc->prioq.data_dmat, data->map, m0, 1534 segs, &nsegs, 0); 1535 if (error != 0) { 1536 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1537 error); 1538 m_freem(m0); 1539 return error; 1540 } 1541 1542 if (ieee80211_radiotap_active_vap(vap)) { 1543 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1544 1545 tap->wt_flags = 0; 1546 tap->wt_rate = rate; 1547 tap->wt_antenna = sc->tx_ant; 1548 1549 ieee80211_radiotap_tx(vap, m0); 1550 } 1551 1552 data->m = m0; 1553 data->ni = ni; 1554 /* management frames are not taken into account for amrr */ 1555 data->rix = IEEE80211_FIXED_RATE_NONE; 1556 1557 wh = mtod(m0, struct ieee80211_frame *); 1558 1559 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1560 flags |= RT2560_TX_ACK; 1561 1562 dur = ieee80211_ack_duration(ic->ic_rt, 1563 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1564 *(uint16_t *)wh->i_dur = htole16(dur); 1565 1566 /* tell hardware to add timestamp for probe responses */ 1567 if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == 1568 IEEE80211_FC0_TYPE_MGT && 1569 (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == 1570 IEEE80211_FC0_SUBTYPE_PROBE_RESP) 1571 flags |= RT2560_TX_TIMESTAMP; 1572 } 1573 1574 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 0, 1575 segs->ds_addr); 1576 1577 bus_dmamap_sync(sc->prioq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1578 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1579 BUS_DMASYNC_PREWRITE); 1580 1581 DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", 1582 m0->m_pkthdr.len, sc->prioq.cur, rate); 1583 1584 /* kick prio */ 1585 sc->prioq.queued++; 1586 sc->prioq.cur = (sc->prioq.cur + 1) % RT2560_PRIO_RING_COUNT; 1587 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_PRIO); 1588 1589 return 0; 1590 } 1591 1592 static int 1593 rt2560_sendprot(struct rt2560_softc *sc, 1594 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1595 { 1596 struct ieee80211com *ic = ni->ni_ic; 1597 struct rt2560_tx_desc *desc; 1598 struct rt2560_tx_data *data; 1599 struct mbuf *mprot; 1600 int protrate, flags, error; 1601 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1602 int nsegs; 1603 1604 mprot = ieee80211_alloc_prot(ni, m, rate, prot); 1605 if (mprot == NULL) { 1606 if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); 1607 device_printf(sc->sc_dev, 1608 "could not allocate mbuf for protection mode %d\n", prot); 1609 return ENOBUFS; 1610 } 1611 1612 desc = &sc->txq.desc[sc->txq.cur_encrypt]; 1613 data = &sc->txq.data[sc->txq.cur_encrypt]; 1614 1615 error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, 1616 mprot, segs, &nsegs, 0); 1617 if (error != 0) { 1618 device_printf(sc->sc_dev, 1619 "could not map mbuf (error %d)\n", error); 1620 m_freem(mprot); 1621 return error; 1622 } 1623 1624 data->m = mprot; 1625 data->ni = ieee80211_ref_node(ni); 1626 /* ctl frames are not taken into account for amrr */ 1627 data->rix = IEEE80211_FIXED_RATE_NONE; 1628 1629 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 1630 flags = RT2560_TX_MORE_FRAG; 1631 if (prot == IEEE80211_PROT_RTSCTS) 1632 flags |= RT2560_TX_ACK; 1633 1634 rt2560_setup_tx_desc(sc, desc, flags, mprot->m_pkthdr.len, protrate, 1, 1635 segs->ds_addr); 1636 1637 bus_dmamap_sync(sc->txq.data_dmat, data->map, 1638 BUS_DMASYNC_PREWRITE); 1639 1640 sc->txq.queued++; 1641 sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT; 1642 1643 return 0; 1644 } 1645 1646 static int 1647 rt2560_tx_raw(struct rt2560_softc *sc, struct mbuf *m0, 1648 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) 1649 { 1650 struct ieee80211vap *vap = ni->ni_vap; 1651 struct ieee80211com *ic = ni->ni_ic; 1652 struct rt2560_tx_desc *desc; 1653 struct rt2560_tx_data *data; 1654 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1655 uint32_t flags; 1656 int nsegs, rate, error; 1657 1658 desc = &sc->prioq.desc[sc->prioq.cur]; 1659 data = &sc->prioq.data[sc->prioq.cur]; 1660 1661 rate = params->ibp_rate0; 1662 if (!ieee80211_isratevalid(ic->ic_rt, rate)) { 1663 /* XXX fall back to mcast/mgmt rate? */ 1664 m_freem(m0); 1665 return EINVAL; 1666 } 1667 1668 flags = 0; 1669 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 1670 flags |= RT2560_TX_ACK; 1671 if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) { 1672 error = rt2560_sendprot(sc, m0, ni, 1673 params->ibp_flags & IEEE80211_BPF_RTS ? 1674 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY, 1675 rate); 1676 if (error) { 1677 m_freem(m0); 1678 return error; 1679 } 1680 flags |= RT2560_TX_LONG_RETRY | RT2560_TX_IFS_SIFS; 1681 } 1682 1683 error = bus_dmamap_load_mbuf_sg(sc->prioq.data_dmat, data->map, m0, 1684 segs, &nsegs, 0); 1685 if (error != 0) { 1686 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1687 error); 1688 m_freem(m0); 1689 return error; 1690 } 1691 1692 if (ieee80211_radiotap_active_vap(vap)) { 1693 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1694 1695 tap->wt_flags = 0; 1696 tap->wt_rate = rate; 1697 tap->wt_antenna = sc->tx_ant; 1698 1699 ieee80211_radiotap_tx(ni->ni_vap, m0); 1700 } 1701 1702 data->m = m0; 1703 data->ni = ni; 1704 1705 /* XXX need to setup descriptor ourself */ 1706 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, 1707 rate, (params->ibp_flags & IEEE80211_BPF_CRYPTO) != 0, 1708 segs->ds_addr); 1709 1710 bus_dmamap_sync(sc->prioq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1711 bus_dmamap_sync(sc->prioq.desc_dmat, sc->prioq.desc_map, 1712 BUS_DMASYNC_PREWRITE); 1713 1714 DPRINTFN(sc, 10, "sending raw frame len=%u idx=%u rate=%u\n", 1715 m0->m_pkthdr.len, sc->prioq.cur, rate); 1716 1717 /* kick prio */ 1718 sc->prioq.queued++; 1719 sc->prioq.cur = (sc->prioq.cur + 1) % RT2560_PRIO_RING_COUNT; 1720 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_KICK_PRIO); 1721 1722 return 0; 1723 } 1724 1725 static int 1726 rt2560_tx_data(struct rt2560_softc *sc, struct mbuf *m0, 1727 struct ieee80211_node *ni) 1728 { 1729 struct ieee80211vap *vap = ni->ni_vap; 1730 struct ieee80211com *ic = ni->ni_ic; 1731 struct rt2560_tx_desc *desc; 1732 struct rt2560_tx_data *data; 1733 struct ieee80211_frame *wh; 1734 const struct ieee80211_txparam *tp = ni->ni_txparms; 1735 struct ieee80211_key *k; 1736 struct mbuf *mnew; 1737 bus_dma_segment_t segs[RT2560_MAX_SCATTER]; 1738 uint16_t dur; 1739 uint32_t flags; 1740 int nsegs, rate, error; 1741 1742 wh = mtod(m0, struct ieee80211_frame *); 1743 1744 if (m0->m_flags & M_EAPOL) { 1745 rate = tp->mgmtrate; 1746 } else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1747 rate = tp->mcastrate; 1748 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 1749 rate = tp->ucastrate; 1750 } else { 1751 (void) ieee80211_ratectl_rate(ni, NULL, 0); 1752 rate = ni->ni_txrate; 1753 } 1754 1755 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 1756 k = ieee80211_crypto_encap(ni, m0); 1757 if (k == NULL) { 1758 m_freem(m0); 1759 return ENOBUFS; 1760 } 1761 1762 /* packet header may have moved, reset our local pointer */ 1763 wh = mtod(m0, struct ieee80211_frame *); 1764 } 1765 1766 flags = 0; 1767 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1768 int prot = IEEE80211_PROT_NONE; 1769 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1770 prot = IEEE80211_PROT_RTSCTS; 1771 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1772 ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) 1773 prot = ic->ic_protmode; 1774 if (prot != IEEE80211_PROT_NONE) { 1775 error = rt2560_sendprot(sc, m0, ni, prot, rate); 1776 if (error) { 1777 m_freem(m0); 1778 return error; 1779 } 1780 flags |= RT2560_TX_LONG_RETRY | RT2560_TX_IFS_SIFS; 1781 } 1782 } 1783 1784 data = &sc->txq.data[sc->txq.cur_encrypt]; 1785 desc = &sc->txq.desc[sc->txq.cur_encrypt]; 1786 1787 error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, m0, 1788 segs, &nsegs, 0); 1789 if (error != 0 && error != EFBIG) { 1790 device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", 1791 error); 1792 m_freem(m0); 1793 return error; 1794 } 1795 if (error != 0) { 1796 mnew = m_defrag(m0, M_NOWAIT); 1797 if (mnew == NULL) { 1798 device_printf(sc->sc_dev, 1799 "could not defragment mbuf\n"); 1800 m_freem(m0); 1801 return ENOBUFS; 1802 } 1803 m0 = mnew; 1804 1805 error = bus_dmamap_load_mbuf_sg(sc->txq.data_dmat, data->map, 1806 m0, segs, &nsegs, 0); 1807 if (error != 0) { 1808 device_printf(sc->sc_dev, 1809 "could not map mbuf (error %d)\n", error); 1810 m_freem(m0); 1811 return error; 1812 } 1813 1814 /* packet header may have moved, reset our local pointer */ 1815 wh = mtod(m0, struct ieee80211_frame *); 1816 } 1817 1818 if (ieee80211_radiotap_active_vap(vap)) { 1819 struct rt2560_tx_radiotap_header *tap = &sc->sc_txtap; 1820 1821 tap->wt_flags = 0; 1822 tap->wt_rate = rate; 1823 tap->wt_antenna = sc->tx_ant; 1824 1825 ieee80211_radiotap_tx(vap, m0); 1826 } 1827 1828 data->m = m0; 1829 data->ni = ni; 1830 1831 /* remember link conditions for rate adaptation algorithm */ 1832 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { 1833 data->rix = ni->ni_txrate; 1834 /* XXX probably need last rssi value and not avg */ 1835 data->rssi = ic->ic_node_getrssi(ni); 1836 } else 1837 data->rix = IEEE80211_FIXED_RATE_NONE; 1838 1839 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1840 flags |= RT2560_TX_ACK; 1841 1842 dur = ieee80211_ack_duration(ic->ic_rt, 1843 rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1844 *(uint16_t *)wh->i_dur = htole16(dur); 1845 } 1846 1847 rt2560_setup_tx_desc(sc, desc, flags, m0->m_pkthdr.len, rate, 1, 1848 segs->ds_addr); 1849 1850 bus_dmamap_sync(sc->txq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); 1851 bus_dmamap_sync(sc->txq.desc_dmat, sc->txq.desc_map, 1852 BUS_DMASYNC_PREWRITE); 1853 1854 DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", 1855 m0->m_pkthdr.len, sc->txq.cur_encrypt, rate); 1856 1857 /* kick encrypt */ 1858 sc->txq.queued++; 1859 sc->txq.cur_encrypt = (sc->txq.cur_encrypt + 1) % RT2560_TX_RING_COUNT; 1860 RAL_WRITE(sc, RT2560_SECCSR1, RT2560_KICK_ENCRYPT); 1861 1862 return 0; 1863 } 1864 1865 static int 1866 rt2560_transmit(struct ieee80211com *ic, struct mbuf *m) 1867 { 1868 struct rt2560_softc *sc = ic->ic_softc; 1869 int error; 1870 1871 RAL_LOCK(sc); 1872 if ((sc->sc_flags & RT2560_F_RUNNING) == 0) { 1873 RAL_UNLOCK(sc); 1874 return (ENXIO); 1875 } 1876 error = mbufq_enqueue(&sc->sc_snd, m); 1877 if (error) { 1878 RAL_UNLOCK(sc); 1879 return (error); 1880 } 1881 rt2560_start(sc); 1882 RAL_UNLOCK(sc); 1883 1884 return (0); 1885 } 1886 1887 static void 1888 rt2560_start(struct rt2560_softc *sc) 1889 { 1890 struct ieee80211_node *ni; 1891 struct mbuf *m; 1892 1893 RAL_LOCK_ASSERT(sc); 1894 1895 while (sc->txq.queued < RT2560_TX_RING_COUNT - 1 && 1896 (m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 1897 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1898 if (rt2560_tx_data(sc, m, ni) != 0) { 1899 if_inc_counter(ni->ni_vap->iv_ifp, 1900 IFCOUNTER_OERRORS, 1); 1901 ieee80211_free_node(ni); 1902 break; 1903 } 1904 sc->sc_tx_timer = 5; 1905 } 1906 } 1907 1908 static void 1909 rt2560_watchdog(void *arg) 1910 { 1911 struct rt2560_softc *sc = arg; 1912 1913 RAL_LOCK_ASSERT(sc); 1914 1915 KASSERT(sc->sc_flags & RT2560_F_RUNNING, ("not running")); 1916 1917 if (sc->sc_invalid) /* card ejected */ 1918 return; 1919 1920 rt2560_encryption_intr(sc); 1921 rt2560_tx_intr(sc); 1922 1923 if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { 1924 device_printf(sc->sc_dev, "device timeout\n"); 1925 rt2560_init_locked(sc); 1926 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 1927 /* NB: callout is reset in rt2560_init() */ 1928 return; 1929 } 1930 callout_reset(&sc->watchdog_ch, hz, rt2560_watchdog, sc); 1931 } 1932 1933 static void 1934 rt2560_parent(struct ieee80211com *ic) 1935 { 1936 struct rt2560_softc *sc = ic->ic_softc; 1937 int startall = 0; 1938 1939 RAL_LOCK(sc); 1940 if (ic->ic_nrunning > 0) { 1941 if ((sc->sc_flags & RT2560_F_RUNNING) == 0) { 1942 rt2560_init_locked(sc); 1943 startall = 1; 1944 } else 1945 rt2560_update_promisc(ic); 1946 } else if (sc->sc_flags & RT2560_F_RUNNING) 1947 rt2560_stop_locked(sc); 1948 RAL_UNLOCK(sc); 1949 if (startall) 1950 ieee80211_start_all(ic); 1951 } 1952 1953 static void 1954 rt2560_bbp_write(struct rt2560_softc *sc, uint8_t reg, uint8_t val) 1955 { 1956 uint32_t tmp; 1957 int ntries; 1958 1959 for (ntries = 0; ntries < 100; ntries++) { 1960 if (!(RAL_READ(sc, RT2560_BBPCSR) & RT2560_BBP_BUSY)) 1961 break; 1962 DELAY(1); 1963 } 1964 if (ntries == 100) { 1965 device_printf(sc->sc_dev, "could not write to BBP\n"); 1966 return; 1967 } 1968 1969 tmp = RT2560_BBP_WRITE | RT2560_BBP_BUSY | reg << 8 | val; 1970 RAL_WRITE(sc, RT2560_BBPCSR, tmp); 1971 1972 DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); 1973 } 1974 1975 static uint8_t 1976 rt2560_bbp_read(struct rt2560_softc *sc, uint8_t reg) 1977 { 1978 uint32_t val; 1979 int ntries; 1980 1981 for (ntries = 0; ntries < 100; ntries++) { 1982 if (!(RAL_READ(sc, RT2560_BBPCSR) & RT2560_BBP_BUSY)) 1983 break; 1984 DELAY(1); 1985 } 1986 if (ntries == 100) { 1987 device_printf(sc->sc_dev, "could not read from BBP\n"); 1988 return 0; 1989 } 1990 1991 val = RT2560_BBP_BUSY | reg << 8; 1992 RAL_WRITE(sc, RT2560_BBPCSR, val); 1993 1994 for (ntries = 0; ntries < 100; ntries++) { 1995 val = RAL_READ(sc, RT2560_BBPCSR); 1996 if (!(val & RT2560_BBP_BUSY)) 1997 return val & 0xff; 1998 DELAY(1); 1999 } 2000 2001 device_printf(sc->sc_dev, "could not read from BBP\n"); 2002 return 0; 2003 } 2004 2005 static void 2006 rt2560_rf_write(struct rt2560_softc *sc, uint8_t reg, uint32_t val) 2007 { 2008 uint32_t tmp; 2009 int ntries; 2010 2011 for (ntries = 0; ntries < 100; ntries++) { 2012 if (!(RAL_READ(sc, RT2560_RFCSR) & RT2560_RF_BUSY)) 2013 break; 2014 DELAY(1); 2015 } 2016 if (ntries == 100) { 2017 device_printf(sc->sc_dev, "could not write to RF\n"); 2018 return; 2019 } 2020 2021 tmp = RT2560_RF_BUSY | RT2560_RF_20BIT | (val & 0xfffff) << 2 | 2022 (reg & 0x3); 2023 RAL_WRITE(sc, RT2560_RFCSR, tmp); 2024 2025 /* remember last written value in sc */ 2026 sc->rf_regs[reg] = val; 2027 2028 DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 0x3, val & 0xfffff); 2029 } 2030 2031 static void 2032 rt2560_set_chan(struct rt2560_softc *sc, struct ieee80211_channel *c) 2033 { 2034 struct ieee80211com *ic = &sc->sc_ic; 2035 uint8_t power, tmp; 2036 u_int i, chan; 2037 2038 chan = ieee80211_chan2ieee(ic, c); 2039 KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); 2040 2041 if (IEEE80211_IS_CHAN_2GHZ(c)) 2042 power = min(sc->txpow[chan - 1], 31); 2043 else 2044 power = 31; 2045 2046 /* adjust txpower using ifconfig settings */ 2047 power -= (100 - ic->ic_txpowlimit) / 8; 2048 2049 DPRINTFN(sc, 2, "setting channel to %u, txpower to %u\n", chan, power); 2050 2051 switch (sc->rf_rev) { 2052 case RT2560_RF_2522: 2053 rt2560_rf_write(sc, RAL_RF1, 0x00814); 2054 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2522_r2[chan - 1]); 2055 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 2056 break; 2057 2058 case RT2560_RF_2523: 2059 rt2560_rf_write(sc, RAL_RF1, 0x08804); 2060 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2523_r2[chan - 1]); 2061 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x38044); 2062 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2063 break; 2064 2065 case RT2560_RF_2524: 2066 rt2560_rf_write(sc, RAL_RF1, 0x0c808); 2067 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2524_r2[chan - 1]); 2068 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 2069 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2070 break; 2071 2072 case RT2560_RF_2525: 2073 rt2560_rf_write(sc, RAL_RF1, 0x08808); 2074 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525_hi_r2[chan - 1]); 2075 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2076 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2077 2078 rt2560_rf_write(sc, RAL_RF1, 0x08808); 2079 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525_r2[chan - 1]); 2080 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2081 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 2082 break; 2083 2084 case RT2560_RF_2525E: 2085 rt2560_rf_write(sc, RAL_RF1, 0x08808); 2086 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2525e_r2[chan - 1]); 2087 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2088 rt2560_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00286 : 0x00282); 2089 break; 2090 2091 case RT2560_RF_2526: 2092 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2526_hi_r2[chan - 1]); 2093 rt2560_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381); 2094 rt2560_rf_write(sc, RAL_RF1, 0x08804); 2095 2096 rt2560_rf_write(sc, RAL_RF2, rt2560_rf2526_r2[chan - 1]); 2097 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 2098 rt2560_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381); 2099 break; 2100 2101 /* dual-band RF */ 2102 case RT2560_RF_5222: 2103 for (i = 0; rt2560_rf5222[i].chan != chan; i++); 2104 2105 rt2560_rf_write(sc, RAL_RF1, rt2560_rf5222[i].r1); 2106 rt2560_rf_write(sc, RAL_RF2, rt2560_rf5222[i].r2); 2107 rt2560_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 2108 rt2560_rf_write(sc, RAL_RF4, rt2560_rf5222[i].r4); 2109 break; 2110 default: 2111 printf("unknown ral rev=%d\n", sc->rf_rev); 2112 } 2113 2114 /* XXX */ 2115 if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { 2116 /* set Japan filter bit for channel 14 */ 2117 tmp = rt2560_bbp_read(sc, 70); 2118 2119 tmp &= ~RT2560_JAPAN_FILTER; 2120 if (chan == 14) 2121 tmp |= RT2560_JAPAN_FILTER; 2122 2123 rt2560_bbp_write(sc, 70, tmp); 2124 2125 /* clear CRC errors */ 2126 RAL_READ(sc, RT2560_CNT0); 2127 } 2128 } 2129 2130 static void 2131 rt2560_getradiocaps(struct ieee80211com *ic, 2132 int maxchans, int *nchans, struct ieee80211_channel chans[]) 2133 { 2134 struct rt2560_softc *sc = ic->ic_softc; 2135 uint8_t bands[IEEE80211_MODE_BYTES]; 2136 2137 memset(bands, 0, sizeof(bands)); 2138 setbit(bands, IEEE80211_MODE_11B); 2139 setbit(bands, IEEE80211_MODE_11G); 2140 ieee80211_add_channel_list_2ghz(chans, maxchans, nchans, 2141 rt2560_chan_2ghz, nitems(rt2560_chan_2ghz), bands, 0); 2142 2143 if (sc->rf_rev == RT2560_RF_5222) { 2144 setbit(bands, IEEE80211_MODE_11A); 2145 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, 2146 rt2560_chan_5ghz, nitems(rt2560_chan_5ghz), bands, 0); 2147 } 2148 } 2149 2150 static void 2151 rt2560_set_channel(struct ieee80211com *ic) 2152 { 2153 struct rt2560_softc *sc = ic->ic_softc; 2154 2155 RAL_LOCK(sc); 2156 rt2560_set_chan(sc, ic->ic_curchan); 2157 RAL_UNLOCK(sc); 2158 2159 } 2160 2161 #if 0 2162 /* 2163 * Disable RF auto-tuning. 2164 */ 2165 static void 2166 rt2560_disable_rf_tune(struct rt2560_softc *sc) 2167 { 2168 uint32_t tmp; 2169 2170 if (sc->rf_rev != RT2560_RF_2523) { 2171 tmp = sc->rf_regs[RAL_RF1] & ~RAL_RF1_AUTOTUNE; 2172 rt2560_rf_write(sc, RAL_RF1, tmp); 2173 } 2174 2175 tmp = sc->rf_regs[RAL_RF3] & ~RAL_RF3_AUTOTUNE; 2176 rt2560_rf_write(sc, RAL_RF3, tmp); 2177 2178 DPRINTFN(sc, 2, "%s", "disabling RF autotune\n"); 2179 } 2180 #endif 2181 2182 /* 2183 * Refer to IEEE Std 802.11-1999 pp. 123 for more information on TSF 2184 * synchronization. 2185 */ 2186 static void 2187 rt2560_enable_tsf_sync(struct rt2560_softc *sc) 2188 { 2189 struct ieee80211com *ic = &sc->sc_ic; 2190 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2191 uint16_t logcwmin, preload; 2192 uint32_t tmp; 2193 2194 /* first, disable TSF synchronization */ 2195 RAL_WRITE(sc, RT2560_CSR14, 0); 2196 2197 tmp = 16 * vap->iv_bss->ni_intval; 2198 RAL_WRITE(sc, RT2560_CSR12, tmp); 2199 2200 RAL_WRITE(sc, RT2560_CSR13, 0); 2201 2202 logcwmin = 5; 2203 preload = (vap->iv_opmode == IEEE80211_M_STA) ? 384 : 1024; 2204 tmp = logcwmin << 16 | preload; 2205 RAL_WRITE(sc, RT2560_BCNOCSR, tmp); 2206 2207 /* finally, enable TSF synchronization */ 2208 tmp = RT2560_ENABLE_TSF | RT2560_ENABLE_TBCN; 2209 if (ic->ic_opmode == IEEE80211_M_STA) 2210 tmp |= RT2560_ENABLE_TSF_SYNC(1); 2211 else 2212 tmp |= RT2560_ENABLE_TSF_SYNC(2) | 2213 RT2560_ENABLE_BEACON_GENERATOR; 2214 RAL_WRITE(sc, RT2560_CSR14, tmp); 2215 2216 DPRINTF(sc, "%s", "enabling TSF synchronization\n"); 2217 } 2218 2219 static void 2220 rt2560_enable_tsf(struct rt2560_softc *sc) 2221 { 2222 RAL_WRITE(sc, RT2560_CSR14, 0); 2223 RAL_WRITE(sc, RT2560_CSR14, 2224 RT2560_ENABLE_TSF_SYNC(2) | RT2560_ENABLE_TSF); 2225 } 2226 2227 static void 2228 rt2560_update_plcp(struct rt2560_softc *sc) 2229 { 2230 struct ieee80211com *ic = &sc->sc_ic; 2231 2232 /* no short preamble for 1Mbps */ 2233 RAL_WRITE(sc, RT2560_PLCP1MCSR, 0x00700400); 2234 2235 if (!(ic->ic_flags & IEEE80211_F_SHPREAMBLE)) { 2236 /* values taken from the reference driver */ 2237 RAL_WRITE(sc, RT2560_PLCP2MCSR, 0x00380401); 2238 RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x00150402); 2239 RAL_WRITE(sc, RT2560_PLCP11MCSR, 0x000b8403); 2240 } else { 2241 /* same values as above or'ed 0x8 */ 2242 RAL_WRITE(sc, RT2560_PLCP2MCSR, 0x00380409); 2243 RAL_WRITE(sc, RT2560_PLCP5p5MCSR, 0x0015040a); 2244 RAL_WRITE(sc, RT2560_PLCP11MCSR, 0x000b840b); 2245 } 2246 2247 DPRINTF(sc, "updating PLCP for %s preamble\n", 2248 (ic->ic_flags & IEEE80211_F_SHPREAMBLE) ? "short" : "long"); 2249 } 2250 2251 /* 2252 * This function can be called by ieee80211_set_shortslottime(). Refer to 2253 * IEEE Std 802.11-1999 pp. 85 to know how these values are computed. 2254 */ 2255 static void 2256 rt2560_update_slot(struct ieee80211com *ic) 2257 { 2258 struct rt2560_softc *sc = ic->ic_softc; 2259 uint8_t slottime; 2260 uint16_t tx_sifs, tx_pifs, tx_difs, eifs; 2261 uint32_t tmp; 2262 2263 #ifndef FORCE_SLOTTIME 2264 slottime = IEEE80211_GET_SLOTTIME(ic); 2265 #else 2266 /* 2267 * Setting slot time according to "short slot time" capability 2268 * in beacon/probe_resp seems to cause problem to acknowledge 2269 * certain AP's data frames transimitted at CCK/DS rates: the 2270 * problematic AP keeps retransmitting data frames, probably 2271 * because MAC level acks are not received by hardware. 2272 * So we cheat a little bit here by claiming we are capable of 2273 * "short slot time" but setting hardware slot time to the normal 2274 * slot time. ral(4) does not seem to have trouble to receive 2275 * frames transmitted using short slot time even if hardware 2276 * slot time is set to normal slot time. If we didn't use this 2277 * trick, we would have to claim that short slot time is not 2278 * supported; this would give relative poor RX performance 2279 * (-1Mb~-2Mb lower) and the _whole_ BSS would stop using short 2280 * slot time. 2281 */ 2282 slottime = IEEE80211_DUR_SLOT; 2283 #endif 2284 2285 /* update the MAC slot boundaries */ 2286 tx_sifs = RAL_SIFS - RT2560_TXRX_TURNAROUND; 2287 tx_pifs = tx_sifs + slottime; 2288 tx_difs = IEEE80211_DUR_DIFS(tx_sifs, slottime); 2289 eifs = (ic->ic_curmode == IEEE80211_MODE_11B) ? 364 : 60; 2290 2291 tmp = RAL_READ(sc, RT2560_CSR11); 2292 tmp = (tmp & ~0x1f00) | slottime << 8; 2293 RAL_WRITE(sc, RT2560_CSR11, tmp); 2294 2295 tmp = tx_pifs << 16 | tx_sifs; 2296 RAL_WRITE(sc, RT2560_CSR18, tmp); 2297 2298 tmp = eifs << 16 | tx_difs; 2299 RAL_WRITE(sc, RT2560_CSR19, tmp); 2300 2301 DPRINTF(sc, "setting slottime to %uus\n", slottime); 2302 } 2303 2304 static void 2305 rt2560_set_basicrates(struct rt2560_softc *sc, 2306 const struct ieee80211_rateset *rs) 2307 { 2308 struct ieee80211com *ic = &sc->sc_ic; 2309 uint32_t mask = 0; 2310 uint8_t rate; 2311 int i; 2312 2313 for (i = 0; i < rs->rs_nrates; i++) { 2314 rate = rs->rs_rates[i]; 2315 2316 if (!(rate & IEEE80211_RATE_BASIC)) 2317 continue; 2318 2319 mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, 2320 IEEE80211_RV(rate)); 2321 } 2322 2323 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, mask); 2324 2325 DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); 2326 } 2327 2328 static void 2329 rt2560_update_led(struct rt2560_softc *sc, int led1, int led2) 2330 { 2331 uint32_t tmp; 2332 2333 /* set ON period to 70ms and OFF period to 30ms */ 2334 tmp = led1 << 16 | led2 << 17 | 70 << 8 | 30; 2335 RAL_WRITE(sc, RT2560_LEDCSR, tmp); 2336 } 2337 2338 static void 2339 rt2560_set_bssid(struct rt2560_softc *sc, const uint8_t *bssid) 2340 { 2341 uint32_t tmp; 2342 2343 tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; 2344 RAL_WRITE(sc, RT2560_CSR5, tmp); 2345 2346 tmp = bssid[4] | bssid[5] << 8; 2347 RAL_WRITE(sc, RT2560_CSR6, tmp); 2348 2349 DPRINTF(sc, "setting BSSID to %6D\n", bssid, ":"); 2350 } 2351 2352 static void 2353 rt2560_set_macaddr(struct rt2560_softc *sc, const uint8_t *addr) 2354 { 2355 uint32_t tmp; 2356 2357 tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; 2358 RAL_WRITE(sc, RT2560_CSR3, tmp); 2359 2360 tmp = addr[4] | addr[5] << 8; 2361 RAL_WRITE(sc, RT2560_CSR4, tmp); 2362 2363 DPRINTF(sc, "setting MAC address to %6D\n", addr, ":"); 2364 } 2365 2366 static void 2367 rt2560_get_macaddr(struct rt2560_softc *sc, uint8_t *addr) 2368 { 2369 uint32_t tmp; 2370 2371 tmp = RAL_READ(sc, RT2560_CSR3); 2372 addr[0] = tmp & 0xff; 2373 addr[1] = (tmp >> 8) & 0xff; 2374 addr[2] = (tmp >> 16) & 0xff; 2375 addr[3] = (tmp >> 24); 2376 2377 tmp = RAL_READ(sc, RT2560_CSR4); 2378 addr[4] = tmp & 0xff; 2379 addr[5] = (tmp >> 8) & 0xff; 2380 } 2381 2382 static void 2383 rt2560_update_promisc(struct ieee80211com *ic) 2384 { 2385 struct rt2560_softc *sc = ic->ic_softc; 2386 uint32_t tmp; 2387 2388 tmp = RAL_READ(sc, RT2560_RXCSR0); 2389 2390 tmp &= ~RT2560_DROP_NOT_TO_ME; 2391 if (ic->ic_promisc == 0) 2392 tmp |= RT2560_DROP_NOT_TO_ME; 2393 2394 RAL_WRITE(sc, RT2560_RXCSR0, tmp); 2395 2396 DPRINTF(sc, "%s promiscuous mode\n", 2397 (ic->ic_promisc > 0) ? "entering" : "leaving"); 2398 } 2399 2400 static const char * 2401 rt2560_get_rf(int rev) 2402 { 2403 switch (rev) { 2404 case RT2560_RF_2522: return "RT2522"; 2405 case RT2560_RF_2523: return "RT2523"; 2406 case RT2560_RF_2524: return "RT2524"; 2407 case RT2560_RF_2525: return "RT2525"; 2408 case RT2560_RF_2525E: return "RT2525e"; 2409 case RT2560_RF_2526: return "RT2526"; 2410 case RT2560_RF_5222: return "RT5222"; 2411 default: return "unknown"; 2412 } 2413 } 2414 2415 static void 2416 rt2560_read_config(struct rt2560_softc *sc) 2417 { 2418 uint16_t val; 2419 int i; 2420 2421 val = rt2560_eeprom_read(sc, RT2560_EEPROM_CONFIG0); 2422 sc->rf_rev = (val >> 11) & 0x7; 2423 sc->hw_radio = (val >> 10) & 0x1; 2424 sc->led_mode = (val >> 6) & 0x7; 2425 sc->rx_ant = (val >> 4) & 0x3; 2426 sc->tx_ant = (val >> 2) & 0x3; 2427 sc->nb_ant = val & 0x3; 2428 2429 /* read default values for BBP registers */ 2430 for (i = 0; i < 16; i++) { 2431 val = rt2560_eeprom_read(sc, RT2560_EEPROM_BBP_BASE + i); 2432 if (val == 0 || val == 0xffff) 2433 continue; 2434 2435 sc->bbp_prom[i].reg = val >> 8; 2436 sc->bbp_prom[i].val = val & 0xff; 2437 } 2438 2439 /* read Tx power for all b/g channels */ 2440 for (i = 0; i < 14 / 2; i++) { 2441 val = rt2560_eeprom_read(sc, RT2560_EEPROM_TXPOWER + i); 2442 sc->txpow[i * 2] = val & 0xff; 2443 sc->txpow[i * 2 + 1] = val >> 8; 2444 } 2445 for (i = 0; i < 14; ++i) { 2446 if (sc->txpow[i] > 31) 2447 sc->txpow[i] = 24; 2448 } 2449 2450 val = rt2560_eeprom_read(sc, RT2560_EEPROM_CALIBRATE); 2451 if ((val & 0xff) == 0xff) 2452 sc->rssi_corr = RT2560_DEFAULT_RSSI_CORR; 2453 else 2454 sc->rssi_corr = val & 0xff; 2455 DPRINTF(sc, "rssi correction %d, calibrate 0x%02x\n", 2456 sc->rssi_corr, val); 2457 } 2458 2459 2460 static void 2461 rt2560_scan_start(struct ieee80211com *ic) 2462 { 2463 struct rt2560_softc *sc = ic->ic_softc; 2464 2465 /* abort TSF synchronization */ 2466 RAL_WRITE(sc, RT2560_CSR14, 0); 2467 rt2560_set_bssid(sc, ieee80211broadcastaddr); 2468 } 2469 2470 static void 2471 rt2560_scan_end(struct ieee80211com *ic) 2472 { 2473 struct rt2560_softc *sc = ic->ic_softc; 2474 struct ieee80211vap *vap = ic->ic_scan->ss_vap; 2475 2476 rt2560_enable_tsf_sync(sc); 2477 /* XXX keep local copy */ 2478 rt2560_set_bssid(sc, vap->iv_bss->ni_bssid); 2479 } 2480 2481 static int 2482 rt2560_bbp_init(struct rt2560_softc *sc) 2483 { 2484 int i, ntries; 2485 2486 /* wait for BBP to be ready */ 2487 for (ntries = 0; ntries < 100; ntries++) { 2488 if (rt2560_bbp_read(sc, RT2560_BBP_VERSION) != 0) 2489 break; 2490 DELAY(1); 2491 } 2492 if (ntries == 100) { 2493 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2494 return EIO; 2495 } 2496 2497 /* initialize BBP registers to default values */ 2498 for (i = 0; i < nitems(rt2560_def_bbp); i++) { 2499 rt2560_bbp_write(sc, rt2560_def_bbp[i].reg, 2500 rt2560_def_bbp[i].val); 2501 } 2502 2503 /* initialize BBP registers to values stored in EEPROM */ 2504 for (i = 0; i < 16; i++) { 2505 if (sc->bbp_prom[i].reg == 0 && sc->bbp_prom[i].val == 0) 2506 break; 2507 rt2560_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2508 } 2509 rt2560_bbp_write(sc, 17, 0x48); /* XXX restore bbp17 */ 2510 2511 return 0; 2512 } 2513 2514 static void 2515 rt2560_set_txantenna(struct rt2560_softc *sc, int antenna) 2516 { 2517 uint32_t tmp; 2518 uint8_t tx; 2519 2520 tx = rt2560_bbp_read(sc, RT2560_BBP_TX) & ~RT2560_BBP_ANTMASK; 2521 if (antenna == 1) 2522 tx |= RT2560_BBP_ANTA; 2523 else if (antenna == 2) 2524 tx |= RT2560_BBP_ANTB; 2525 else 2526 tx |= RT2560_BBP_DIVERSITY; 2527 2528 /* need to force I/Q flip for RF 2525e, 2526 and 5222 */ 2529 if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526 || 2530 sc->rf_rev == RT2560_RF_5222) 2531 tx |= RT2560_BBP_FLIPIQ; 2532 2533 rt2560_bbp_write(sc, RT2560_BBP_TX, tx); 2534 2535 /* update values for CCK and OFDM in BBPCSR1 */ 2536 tmp = RAL_READ(sc, RT2560_BBPCSR1) & ~0x00070007; 2537 tmp |= (tx & 0x7) << 16 | (tx & 0x7); 2538 RAL_WRITE(sc, RT2560_BBPCSR1, tmp); 2539 } 2540 2541 static void 2542 rt2560_set_rxantenna(struct rt2560_softc *sc, int antenna) 2543 { 2544 uint8_t rx; 2545 2546 rx = rt2560_bbp_read(sc, RT2560_BBP_RX) & ~RT2560_BBP_ANTMASK; 2547 if (antenna == 1) 2548 rx |= RT2560_BBP_ANTA; 2549 else if (antenna == 2) 2550 rx |= RT2560_BBP_ANTB; 2551 else 2552 rx |= RT2560_BBP_DIVERSITY; 2553 2554 /* need to force no I/Q flip for RF 2525e and 2526 */ 2555 if (sc->rf_rev == RT2560_RF_2525E || sc->rf_rev == RT2560_RF_2526) 2556 rx &= ~RT2560_BBP_FLIPIQ; 2557 2558 rt2560_bbp_write(sc, RT2560_BBP_RX, rx); 2559 } 2560 2561 static void 2562 rt2560_init_locked(struct rt2560_softc *sc) 2563 { 2564 struct ieee80211com *ic = &sc->sc_ic; 2565 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2566 uint32_t tmp; 2567 int i; 2568 2569 RAL_LOCK_ASSERT(sc); 2570 2571 rt2560_stop_locked(sc); 2572 2573 /* setup tx rings */ 2574 tmp = RT2560_PRIO_RING_COUNT << 24 | 2575 RT2560_ATIM_RING_COUNT << 16 | 2576 RT2560_TX_RING_COUNT << 8 | 2577 RT2560_TX_DESC_SIZE; 2578 2579 /* rings must be initialized in this exact order */ 2580 RAL_WRITE(sc, RT2560_TXCSR2, tmp); 2581 RAL_WRITE(sc, RT2560_TXCSR3, sc->txq.physaddr); 2582 RAL_WRITE(sc, RT2560_TXCSR5, sc->prioq.physaddr); 2583 RAL_WRITE(sc, RT2560_TXCSR4, sc->atimq.physaddr); 2584 RAL_WRITE(sc, RT2560_TXCSR6, sc->bcnq.physaddr); 2585 2586 /* setup rx ring */ 2587 tmp = RT2560_RX_RING_COUNT << 8 | RT2560_RX_DESC_SIZE; 2588 2589 RAL_WRITE(sc, RT2560_RXCSR1, tmp); 2590 RAL_WRITE(sc, RT2560_RXCSR2, sc->rxq.physaddr); 2591 2592 /* initialize MAC registers to default values */ 2593 for (i = 0; i < nitems(rt2560_def_mac); i++) 2594 RAL_WRITE(sc, rt2560_def_mac[i].reg, rt2560_def_mac[i].val); 2595 2596 rt2560_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 2597 2598 /* set basic rate set (will be updated later) */ 2599 RAL_WRITE(sc, RT2560_ARSP_PLCP_1, 0x153); 2600 2601 rt2560_update_slot(ic); 2602 rt2560_update_plcp(sc); 2603 rt2560_update_led(sc, 0, 0); 2604 2605 RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC); 2606 RAL_WRITE(sc, RT2560_CSR1, RT2560_HOST_READY); 2607 2608 if (rt2560_bbp_init(sc) != 0) { 2609 rt2560_stop_locked(sc); 2610 return; 2611 } 2612 2613 rt2560_set_txantenna(sc, sc->tx_ant); 2614 rt2560_set_rxantenna(sc, sc->rx_ant); 2615 2616 /* set default BSS channel */ 2617 rt2560_set_chan(sc, ic->ic_curchan); 2618 2619 /* kick Rx */ 2620 tmp = RT2560_DROP_PHY_ERROR | RT2560_DROP_CRC_ERROR; 2621 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2622 tmp |= RT2560_DROP_CTL | RT2560_DROP_VERSION_ERROR; 2623 if (ic->ic_opmode != IEEE80211_M_HOSTAP && 2624 ic->ic_opmode != IEEE80211_M_MBSS) 2625 tmp |= RT2560_DROP_TODS; 2626 if (ic->ic_promisc == 0) 2627 tmp |= RT2560_DROP_NOT_TO_ME; 2628 } 2629 RAL_WRITE(sc, RT2560_RXCSR0, tmp); 2630 2631 /* clear old FCS and Rx FIFO errors */ 2632 RAL_READ(sc, RT2560_CNT0); 2633 RAL_READ(sc, RT2560_CNT4); 2634 2635 /* clear any pending interrupts */ 2636 RAL_WRITE(sc, RT2560_CSR7, 0xffffffff); 2637 2638 /* enable interrupts */ 2639 RAL_WRITE(sc, RT2560_CSR8, RT2560_INTR_MASK); 2640 2641 sc->sc_flags |= RT2560_F_RUNNING; 2642 2643 callout_reset(&sc->watchdog_ch, hz, rt2560_watchdog, sc); 2644 } 2645 2646 static void 2647 rt2560_init(void *priv) 2648 { 2649 struct rt2560_softc *sc = priv; 2650 struct ieee80211com *ic = &sc->sc_ic; 2651 2652 RAL_LOCK(sc); 2653 rt2560_init_locked(sc); 2654 RAL_UNLOCK(sc); 2655 2656 if (sc->sc_flags & RT2560_F_RUNNING) 2657 ieee80211_start_all(ic); /* start all vap's */ 2658 } 2659 2660 static void 2661 rt2560_stop_locked(struct rt2560_softc *sc) 2662 { 2663 volatile int *flags = &sc->sc_flags; 2664 2665 RAL_LOCK_ASSERT(sc); 2666 2667 while (*flags & RT2560_F_INPUT_RUNNING) 2668 msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); 2669 2670 callout_stop(&sc->watchdog_ch); 2671 sc->sc_tx_timer = 0; 2672 2673 if (sc->sc_flags & RT2560_F_RUNNING) { 2674 sc->sc_flags &= ~RT2560_F_RUNNING; 2675 2676 /* abort Tx */ 2677 RAL_WRITE(sc, RT2560_TXCSR0, RT2560_ABORT_TX); 2678 2679 /* disable Rx */ 2680 RAL_WRITE(sc, RT2560_RXCSR0, RT2560_DISABLE_RX); 2681 2682 /* reset ASIC (imply reset BBP) */ 2683 RAL_WRITE(sc, RT2560_CSR1, RT2560_RESET_ASIC); 2684 RAL_WRITE(sc, RT2560_CSR1, 0); 2685 2686 /* disable interrupts */ 2687 RAL_WRITE(sc, RT2560_CSR8, 0xffffffff); 2688 2689 /* reset Tx and Rx rings */ 2690 rt2560_reset_tx_ring(sc, &sc->txq); 2691 rt2560_reset_tx_ring(sc, &sc->atimq); 2692 rt2560_reset_tx_ring(sc, &sc->prioq); 2693 rt2560_reset_tx_ring(sc, &sc->bcnq); 2694 rt2560_reset_rx_ring(sc, &sc->rxq); 2695 } 2696 } 2697 2698 void 2699 rt2560_stop(void *arg) 2700 { 2701 struct rt2560_softc *sc = arg; 2702 2703 RAL_LOCK(sc); 2704 rt2560_stop_locked(sc); 2705 RAL_UNLOCK(sc); 2706 } 2707 2708 static int 2709 rt2560_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 2710 const struct ieee80211_bpf_params *params) 2711 { 2712 struct ieee80211com *ic = ni->ni_ic; 2713 struct rt2560_softc *sc = ic->ic_softc; 2714 2715 RAL_LOCK(sc); 2716 2717 /* prevent management frames from being sent if we're not ready */ 2718 if (!(sc->sc_flags & RT2560_F_RUNNING)) { 2719 RAL_UNLOCK(sc); 2720 m_freem(m); 2721 return ENETDOWN; 2722 } 2723 if (sc->prioq.queued >= RT2560_PRIO_RING_COUNT) { 2724 RAL_UNLOCK(sc); 2725 m_freem(m); 2726 return ENOBUFS; /* XXX */ 2727 } 2728 2729 if (params == NULL) { 2730 /* 2731 * Legacy path; interpret frame contents to decide 2732 * precisely how to send the frame. 2733 */ 2734 if (rt2560_tx_mgt(sc, m, ni) != 0) 2735 goto bad; 2736 } else { 2737 /* 2738 * Caller supplied explicit parameters to use in 2739 * sending the frame. 2740 */ 2741 if (rt2560_tx_raw(sc, m, ni, params)) 2742 goto bad; 2743 } 2744 sc->sc_tx_timer = 5; 2745 2746 RAL_UNLOCK(sc); 2747 2748 return 0; 2749 bad: 2750 RAL_UNLOCK(sc); 2751 return EIO; /* XXX */ 2752 } 2753