xref: /freebsd/sys/dev/qlxgbe/ql_inline.h (revision a98ff317388a00b992f1bf8404dee596f9383f5e)
1 /*
2  * Copyright (c) 2013-2014 Qlogic Corporation
3  * All rights reserved.
4  *
5  *  Redistribution and use in source and binary forms, with or without
6  *  modification, are permitted provided that the following conditions
7  *  are met:
8  *
9  *  1. Redistributions of source code must retain the above copyright
10  *     notice, this list of conditions and the following disclaimer.
11  *  2. Redistributions in binary form must reproduce the above copyright
12  *     notice, this list of conditions and the following disclaimer in the
13  *     documentation and/or other materials provided with the distribution.
14  *
15  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
16  *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
19  *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
20  *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
21  *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
22  *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23  *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24  *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
25  *  POSSIBILITY OF SUCH DAMAGE.
26  *
27  * $FreeBSD$
28  */
29 /*
30  * File: ql_inline.h
31  * Author : David C Somayajulu, Qlogic Corporation, Aliso Viejo, CA 92656.
32  */
33 #ifndef _QL_INLINE_H_
34 #define _QL_INLINE_H_
35 
36 
37 #define QL8_SEMLOCK_TIMEOUT	1000/* QLA8020 Semaphore Lock Timeout 10ms */
38 
39 
40 /*
41  * Inline functions for hardware semaphores
42  */
43 
44 /*
45  * Name:	qla_sem_lock
46  * Function:	Locks one of the semaphore registers (semaphore 2,3,5 & 7)
47  *		If the id_reg is valid, then id_val is written into it.
48  *		This is for debugging purpose
49  * Returns:	0 on success; otherwise its failed.
50  */
51 static __inline int
52 qla_sem_lock(qla_host_t *ha, uint32_t sem_reg, uint32_t id_reg, uint32_t id_val)
53 {
54 	int count = QL8_SEMLOCK_TIMEOUT;
55 
56 	while (count) {
57 		if ((READ_REG32(ha, sem_reg) & BIT_0))
58 			break;
59 		count--;
60 
61 		if (!count)
62 			return(-1);
63 		qla_mdelay(__func__, 10);
64 	}
65 	if (id_reg)
66 		WRITE_REG32(ha, id_reg, id_val);
67 
68 	return(0);
69 }
70 
71 /*
72  * Name:	qla_sem_unlock
73  * Function:	Unlocks the semaphore registers (semaphore 2,3,5 & 7)
74  *		previously locked by qla_sem_lock()
75  */
76 static __inline void
77 qla_sem_unlock(qla_host_t *ha, uint32_t sem_reg)
78 {
79 	READ_REG32(ha, sem_reg);
80 }
81 
82 static __inline int
83 qla_get_ifq_snd_maxlen(qla_host_t *ha)
84 {
85 	return(((NUM_TX_DESCRIPTORS * 4) - 1));
86 }
87 
88 static __inline uint32_t
89 qla_get_optics(qla_host_t *ha)
90 {
91 	uint32_t link_speed;
92 
93 	link_speed = READ_REG32(ha, Q8_LINK_SPEED_0);
94 	if (ha->pci_func == 0)
95 		link_speed = link_speed & 0xFF;
96 	else
97 		link_speed = (link_speed >> 8) & 0xFF;
98 
99 	switch (link_speed) {
100 	case 0x1:
101 		link_speed = IFM_100_FX;
102 		break;
103 
104 	case 0x10:
105 		link_speed = IFM_1000_SX;
106 		break;
107 
108 	default:
109 		if ((ha->hw.module_type == 0x4) ||
110 			(ha->hw.module_type == 0x5) ||
111 			(ha->hw.module_type == 0x6))
112 			link_speed = (IFM_10G_TWINAX);
113 		else
114 			link_speed = (IFM_10G_LR | IFM_10G_SR);
115 		break;
116 	}
117 
118 	return(link_speed);
119 }
120 
121 static __inline uint8_t *
122 qla_get_mac_addr(qla_host_t *ha)
123 {
124 	return (ha->hw.mac_addr);
125 }
126 
127 static __inline void
128 qla_set_hw_rcv_desc(qla_host_t *ha, uint32_t r_idx, uint32_t index,
129 	uint32_t handle, bus_addr_t paddr, uint32_t buf_size)
130 {
131 	volatile q80_recv_desc_t *rcv_desc;
132 
133 	rcv_desc = (q80_recv_desc_t *)ha->hw.dma_buf.rds_ring[r_idx].dma_b;
134 
135 	rcv_desc += index;
136 
137 	rcv_desc->handle = (uint16_t)handle;
138 	rcv_desc->buf_size = buf_size;
139 	rcv_desc->buf_addr = paddr;
140 
141 	return;
142 }
143 
144 static __inline void
145 qla_init_hw_rcv_descriptors(qla_host_t *ha)
146 {
147 	int i;
148 
149 	for (i = 0; i < ha->hw.num_rds_rings; i++)
150 		bzero((void *)ha->hw.dma_buf.rds_ring[i].dma_b,
151 			(sizeof(q80_recv_desc_t) * NUM_RX_DESCRIPTORS));
152 }
153 
154 static __inline int
155 qla_lock(qla_host_t *ha, const char *str, uint32_t no_delay)
156 {
157 	int ret = -1;
158 
159 	while (1) {
160 		mtx_lock(&ha->hw_lock);
161 		if (!ha->hw_lock_held) {
162 			ha->hw_lock_held = 1;
163 			ha->qla_lock = str;
164 			ret = 0;
165 			mtx_unlock(&ha->hw_lock);
166 			break;
167 		}
168 		mtx_unlock(&ha->hw_lock);
169 
170 		if (no_delay)
171 			break;
172 		else
173 			qla_mdelay(__func__, 1);
174 	}
175 	return (ret);
176 }
177 
178 static __inline void
179 qla_unlock(qla_host_t *ha, const char *str)
180 {
181 	mtx_lock(&ha->hw_lock);
182 	ha->hw_lock_held = 0;
183 	ha->qla_unlock = str;
184 	mtx_unlock(&ha->hw_lock);
185 }
186 
187 #endif /* #ifndef _QL_INLINE_H_ */
188