1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2021, Adrian Chadd <adrian@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice unmodified, this list of conditions, and the following 11 * disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 35 #include <sys/bus.h> 36 #include <sys/interrupt.h> 37 #include <sys/malloc.h> 38 #include <sys/lock.h> 39 #include <sys/mutex.h> 40 #include <sys/kernel.h> 41 #include <sys/module.h> 42 #include <sys/rman.h> 43 #include <sys/gpio.h> 44 45 #include <vm/vm.h> 46 #include <vm/pmap.h> 47 #include <vm/vm_extern.h> 48 49 #include <machine/bus.h> 50 #include <machine/cpu.h> 51 52 #include <dev/fdt/fdt_common.h> 53 #include <dev/fdt/fdt_pinctrl.h> 54 55 #include <dev/gpio/gpiobusvar.h> 56 #include <dev/ofw/ofw_bus.h> 57 #include <dev/ofw/ofw_bus_subr.h> 58 59 #include <dev/qcom_tcsr/qcom_tcsr_var.h> 60 #include <dev/qcom_tcsr/qcom_tcsr_reg.h> 61 62 /* 63 * The linux-msm branches that support IPQ4018 use "ipq,tcsr". 64 * The openwrt addons use qcom,tcsr. So for now support both. 65 * 66 * Also, it's not quite clear yet (since this is the first port!) 67 * whether these options and registers are specific to the QCA IPQ401x 68 * part or show up in different linux branches as different registers 69 * but with the same driver/naming here. Let's hope that doesn't 70 * happen. 71 */ 72 static struct ofw_compat_data compat_data[] = { 73 { "qcom,tcsr", 1 }, 74 { "ipq,tcsr", 1 }, 75 { NULL, 0 } 76 }; 77 78 static int 79 qcom_tcsr_probe(device_t dev) 80 { 81 82 if (!ofw_bus_status_okay(dev)) 83 return (ENXIO); 84 85 if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data) 86 return (ENXIO); 87 88 device_set_desc(dev, "Qualcomm Core Top Control and Status Driver"); 89 return (BUS_PROBE_DEFAULT); 90 } 91 92 static int 93 qcom_tcsr_attach(device_t dev) 94 { 95 struct qcom_tcsr_softc *sc = device_get_softc(dev); 96 int rid, ret; 97 uint32_t val; 98 99 sc->sc_dev = dev; 100 101 /* 102 * Hardware version is stored in the ofw_compat_data table. 103 */ 104 sc->hw_version = 105 ofw_bus_search_compatible(dev, compat_data)->ocd_data; 106 107 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF); 108 109 rid = 0; 110 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 111 RF_ACTIVE); 112 if (!sc->sc_mem_res) { 113 device_printf(dev, "ERROR: Could not map memory\n"); 114 ret = ENXIO; 115 goto error; 116 } 117 118 /* 119 * Parse out the open firmware entries to see which particular 120 * configurations we need to set here. 121 */ 122 123 /* 124 * USB control select. 125 * 126 * For linux-msm on the IPQ401x, it actually calls into the SCM 127 * to make the change. OpenWRT just does a register write. 128 * We'll do the register write for now. 129 */ 130 if (OF_getencprop(ofw_bus_get_node(dev), "qcom,usb-ctrl-select", 131 &val, sizeof(val)) > 0) { 132 if (bootverbose) 133 device_printf(sc->sc_dev, 134 "USB control select (val 0x%x)\n", 135 val); 136 QCOM_TCSR_WRITE_4(sc, QCOM_TCSR_USB_PORT_SEL, val); 137 } 138 139 /* 140 * USB high speed phy mode select. 141 */ 142 if (OF_getencprop(ofw_bus_get_node(dev), "qcom,usb-hsphy-mode-select", 143 &val, sizeof(val)) > 0) { 144 if (bootverbose) 145 device_printf(sc->sc_dev, 146 "USB high speed PHY mode select (val 0x%x)\n", 147 val); 148 QCOM_TCSR_WRITE_4(sc, QCOM_TCSR_USB_HSPHY_CONFIG, val); 149 } 150 151 /* 152 * Ethernet switch subsystem interface type select. 153 */ 154 if (OF_getencprop(ofw_bus_get_node(dev), "qcom,ess-interface-select", 155 &val, sizeof(val)) > 0) { 156 uint32_t reg; 157 158 if (bootverbose) 159 device_printf(sc->sc_dev, 160 "ESS external interface select (val 0x%x)\n", 161 val); 162 reg = QCOM_TCSR_READ_4(sc, QCOM_TCSR_ESS_INTERFACE_SEL_OFFSET); 163 reg &= ~QCOM_TCSR_ESS_INTERFACE_SEL_MASK; 164 reg |= (val & QCOM_TCSR_ESS_INTERFACE_SEL_MASK); 165 QCOM_TCSR_WRITE_4(sc, QCOM_TCSR_ESS_INTERFACE_SEL_OFFSET, reg); 166 } 167 168 /* 169 * WiFi GLB select. 170 */ 171 if (OF_getencprop(ofw_bus_get_node(dev), "qcom,wifi_glb_cfg", 172 &val, sizeof(val)) > 0) { 173 if (bootverbose) 174 device_printf(sc->sc_dev, 175 "WIFI GLB select (val 0x%x)\n", 176 val); 177 QCOM_TCSR_WRITE_4(sc, QCOM_TCSR_WIFI0_GLB_CFG_OFFSET, val); 178 QCOM_TCSR_WRITE_4(sc, QCOM_TCSR_WIFI1_GLB_CFG_OFFSET, val); 179 } 180 181 /* 182 * WiFi NOC interconnect memory type. 183 */ 184 if (OF_getencprop(ofw_bus_get_node(dev), 185 "qcom,wifi_noc_memtype_m0_m2", 186 &val, sizeof(val)) > 0) { 187 if (bootverbose) 188 device_printf(sc->sc_dev, 189 "WiFi NOC memory type (val 0x%x)\n", 190 val); 191 QCOM_TCSR_WRITE_4(sc, QCOM_TCSR_PNOC_SNOC_MEMTYPE_M0_M2, val); 192 } 193 194 return (0); 195 196 error: 197 if (sc->sc_mem_res) 198 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 199 mtx_destroy(&sc->sc_mtx); 200 return (ret); 201 } 202 203 static int 204 qcom_tcsr_detach(device_t dev) 205 { 206 struct qcom_tcsr_softc *sc = device_get_softc(dev); 207 208 if (sc->sc_mem_res) 209 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 210 211 mtx_destroy(&sc->sc_mtx); 212 213 return (0); 214 } 215 216 static device_method_t qcom_tcsr_methods[] = { 217 /* Device interface */ 218 DEVMETHOD(device_probe, qcom_tcsr_probe), 219 DEVMETHOD(device_attach, qcom_tcsr_attach), 220 DEVMETHOD(device_detach, qcom_tcsr_detach), 221 222 DEVMETHOD_END 223 }; 224 225 static driver_t qcom_tcsr_driver = { 226 "qcom_tcsr", 227 qcom_tcsr_methods, 228 sizeof(struct qcom_tcsr_softc), 229 }; 230 231 /* 232 * This has to be run early, before the rest of the hardware is potentially 233 * probed/attached. 234 */ 235 EARLY_DRIVER_MODULE(qcom_tcsr, simplebus, qcom_tcsr_driver, 0, 0, 236 BUS_PASS_CPU + BUS_PASS_ORDER_EARLY); 237 SIMPLEBUS_PNP_INFO(compat_data); 238