1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2006 Marcel Moolenaar 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 /* 33 * PCI "universal" communications card driver configuration data (used to 34 * match/attach the cards). 35 */ 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/bus.h> 41 #include <sys/sysctl.h> 42 43 #include <machine/resource.h> 44 #include <machine/bus.h> 45 #include <sys/rman.h> 46 47 #include <dev/ic/ns16550.h> 48 49 #include <dev/pci/pcireg.h> 50 #include <dev/pci/pcivar.h> 51 52 #include <dev/puc/puc_bus.h> 53 #include <dev/puc/puc_cfg.h> 54 #include <dev/puc/puc_bfe.h> 55 56 static puc_config_f puc_config_advantech; 57 static puc_config_f puc_config_amc; 58 static puc_config_f puc_config_diva; 59 static puc_config_f puc_config_exar; 60 static puc_config_f puc_config_exar_pcie; 61 static puc_config_f puc_config_icbook; 62 static puc_config_f puc_config_moxa; 63 static puc_config_f puc_config_oxford_pci954; 64 static puc_config_f puc_config_oxford_pcie; 65 static puc_config_f puc_config_quatech; 66 static puc_config_f puc_config_syba; 67 static puc_config_f puc_config_siig; 68 static puc_config_f puc_config_sunix; 69 static puc_config_f puc_config_timedia; 70 static puc_config_f puc_config_titan; 71 72 const struct puc_cfg puc_pci_devices[] = { 73 { 0x0009, 0x7168, 0xffff, 0, 74 "Sunix SUN1889", 75 DEFAULT_RCLK * 8, 76 PUC_PORT_2S, 0x10, 0, 8, 77 }, 78 79 { 0x103c, 0x1048, 0x103c, 0x1049, 80 "HP Diva Serial [GSP] Multiport UART - Tosca Console", 81 DEFAULT_RCLK, 82 PUC_PORT_3S, 0x10, 0, -1, 83 .config_function = puc_config_diva 84 }, 85 86 { 0x103c, 0x1048, 0x103c, 0x104a, 87 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary", 88 DEFAULT_RCLK, 89 PUC_PORT_2S, 0x10, 0, -1, 90 .config_function = puc_config_diva 91 }, 92 93 { 0x103c, 0x1048, 0x103c, 0x104b, 94 "HP Diva Serial [GSP] Multiport UART - Maestro SP2", 95 DEFAULT_RCLK, 96 PUC_PORT_4S, 0x10, 0, -1, 97 .config_function = puc_config_diva 98 }, 99 100 { 0x103c, 0x1048, 0x103c, 0x1223, 101 "HP Diva Serial [GSP] Multiport UART - Superdome Console", 102 DEFAULT_RCLK, 103 PUC_PORT_3S, 0x10, 0, -1, 104 .config_function = puc_config_diva 105 }, 106 107 { 0x103c, 0x1048, 0x103c, 0x1226, 108 "HP Diva Serial [GSP] Multiport UART - Keystone SP2", 109 DEFAULT_RCLK, 110 PUC_PORT_3S, 0x10, 0, -1, 111 .config_function = puc_config_diva 112 }, 113 114 { 0x103c, 0x1048, 0x103c, 0x1282, 115 "HP Diva Serial [GSP] Multiport UART - Everest SP2", 116 DEFAULT_RCLK, 117 PUC_PORT_3S, 0x10, 0, -1, 118 .config_function = puc_config_diva 119 }, 120 121 { 0x10b5, 0x1076, 0x10b5, 0x1076, 122 "VScom PCI-800", 123 DEFAULT_RCLK * 8, 124 PUC_PORT_8S, 0x18, 0, 8, 125 }, 126 127 { 0x10b5, 0x1077, 0x10b5, 0x1077, 128 "VScom PCI-400", 129 DEFAULT_RCLK * 8, 130 PUC_PORT_4S, 0x18, 0, 8, 131 }, 132 133 { 0x10b5, 0x1103, 0x10b5, 0x1103, 134 "VScom PCI-200", 135 DEFAULT_RCLK * 8, 136 PUC_PORT_2S, 0x18, 4, 0, 137 }, 138 139 /* 140 * Boca Research Turbo Serial 658 (8 serial port) card. 141 * Appears to be the same as Chase Research PLC PCI-FAST8 142 * and Perle PCI-FAST8 Multi-Port serial cards. 143 */ 144 { 0x10b5, 0x9050, 0x12e0, 0x0021, 145 "Boca Research Turbo Serial 658", 146 DEFAULT_RCLK * 4, 147 PUC_PORT_8S, 0x18, 0, 8, 148 }, 149 150 { 0x10b5, 0x9050, 0x12e0, 0x0031, 151 "Boca Research Turbo Serial 654", 152 DEFAULT_RCLK * 4, 153 PUC_PORT_4S, 0x18, 0, 8, 154 }, 155 156 /* 157 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with 158 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 159 * into the subsystem fields, and claims that it's a 160 * network/misc (0x02/0x80) device. 161 */ 162 { 0x10b5, 0x9050, 0xd84d, 0x6808, 163 "Dolphin Peripherals 4035", 164 DEFAULT_RCLK, 165 PUC_PORT_2S, 0x18, 4, 0, 166 }, 167 168 /* 169 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with 170 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 171 * into the subsystem fields, and claims that it's a 172 * network/misc (0x02/0x80) device. 173 */ 174 { 0x10b5, 0x9050, 0xd84d, 0x6810, 175 "Dolphin Peripherals 4014", 176 0, 177 PUC_PORT_2P, 0x20, 4, 0, 178 }, 179 180 { 0x10e8, 0x818e, 0xffff, 0, 181 "Applied Micro Circuits 8 Port UART", 182 DEFAULT_RCLK, 183 PUC_PORT_8S, 0x14, -1, -1, 184 .config_function = puc_config_amc 185 }, 186 187 /* 188 * The following members of the Digi International Neo series are 189 * based on Exar PCI chips, f. e. the 8 port variants on XR17V258IV. 190 * Accordingly, the PCIe versions of these cards incorporate a PLX 191 * PCIe-PCI-bridge. 192 */ 193 194 { 0x114f, 0x00b0, 0xffff, 0, 195 "Digi Neo PCI 4 Port", 196 DEFAULT_RCLK * 8, 197 PUC_PORT_4S, 0x10, 0, -1, 198 .config_function = puc_config_exar 199 }, 200 201 { 0x114f, 0x00b1, 0xffff, 0, 202 "Digi Neo PCI 8 Port", 203 DEFAULT_RCLK * 8, 204 PUC_PORT_8S, 0x10, 0, -1, 205 .config_function = puc_config_exar 206 }, 207 208 { 0x114f, 0x00f0, 0xffff, 0, 209 "Digi Neo PCIe 8 Port", 210 DEFAULT_RCLK * 8, 211 PUC_PORT_8S, 0x10, 0, -1, 212 .config_function = puc_config_exar 213 }, 214 215 { 0x114f, 0x00f1, 0xffff, 0, 216 "Digi Neo PCIe 4 Port", 217 DEFAULT_RCLK * 8, 218 PUC_PORT_4S, 0x10, 0, -1, 219 .config_function = puc_config_exar 220 }, 221 222 { 0x114f, 0x00f2, 0xffff, 0, 223 "Digi Neo PCIe 4 Port RJ45", 224 DEFAULT_RCLK * 8, 225 PUC_PORT_4S, 0x10, 0, -1, 226 .config_function = puc_config_exar 227 }, 228 229 { 0x114f, 0x00f3, 0xffff, 0, 230 "Digi Neo PCIe 8 Port RJ45", 231 DEFAULT_RCLK * 8, 232 PUC_PORT_8S, 0x10, 0, -1, 233 .config_function = puc_config_exar 234 }, 235 236 { 0x11fe, 0x8010, 0xffff, 0, 237 "Comtrol RocketPort 550/8 RJ11 part A", 238 DEFAULT_RCLK * 4, 239 PUC_PORT_4S, 0x10, 0, 8, 240 }, 241 242 { 0x11fe, 0x8011, 0xffff, 0, 243 "Comtrol RocketPort 550/8 RJ11 part B", 244 DEFAULT_RCLK * 4, 245 PUC_PORT_4S, 0x10, 0, 8, 246 }, 247 248 { 0x11fe, 0x8012, 0xffff, 0, 249 "Comtrol RocketPort 550/8 Octa part A", 250 DEFAULT_RCLK * 4, 251 PUC_PORT_4S, 0x10, 0, 8, 252 }, 253 254 { 0x11fe, 0x8013, 0xffff, 0, 255 "Comtrol RocketPort 550/8 Octa part B", 256 DEFAULT_RCLK * 4, 257 PUC_PORT_4S, 0x10, 0, 8, 258 }, 259 260 { 0x11fe, 0x8014, 0xffff, 0, 261 "Comtrol RocketPort 550/4 RJ45", 262 DEFAULT_RCLK * 4, 263 PUC_PORT_4S, 0x10, 0, 8, 264 }, 265 266 { 0x11fe, 0x8015, 0xffff, 0, 267 "Comtrol RocketPort 550/Quad", 268 DEFAULT_RCLK * 4, 269 PUC_PORT_4S, 0x10, 0, 8, 270 }, 271 272 { 0x11fe, 0x8016, 0xffff, 0, 273 "Comtrol RocketPort 550/16 part A", 274 DEFAULT_RCLK * 4, 275 PUC_PORT_4S, 0x10, 0, 8, 276 }, 277 278 { 0x11fe, 0x8017, 0xffff, 0, 279 "Comtrol RocketPort 550/16 part B", 280 DEFAULT_RCLK * 4, 281 PUC_PORT_12S, 0x10, 0, 8, 282 }, 283 284 { 0x11fe, 0x8018, 0xffff, 0, 285 "Comtrol RocketPort 550/8 part A", 286 DEFAULT_RCLK * 4, 287 PUC_PORT_4S, 0x10, 0, 8, 288 }, 289 290 { 0x11fe, 0x8019, 0xffff, 0, 291 "Comtrol RocketPort 550/8 part B", 292 DEFAULT_RCLK * 4, 293 PUC_PORT_4S, 0x10, 0, 8, 294 }, 295 296 /* 297 * IBM SurePOS 300 Series (481033H) serial ports 298 * Details can be found on the IBM RSS websites 299 */ 300 301 { 0x1014, 0x0297, 0xffff, 0, 302 "IBM SurePOS 300 Series (481033H) serial ports", 303 DEFAULT_RCLK, 304 PUC_PORT_4S, 0x10, 4, 0 305 }, 306 307 /* 308 * SIIG Boards. 309 * 310 * SIIG provides documentation for their boards at: 311 * <URL:http://www.siig.com/downloads.asp> 312 */ 313 314 { 0x131f, 0x1010, 0xffff, 0, 315 "SIIG Cyber I/O PCI 16C550 (10x family)", 316 DEFAULT_RCLK, 317 PUC_PORT_1S1P, 0x18, 4, 0, 318 }, 319 320 { 0x131f, 0x1011, 0xffff, 0, 321 "SIIG Cyber I/O PCI 16C650 (10x family)", 322 DEFAULT_RCLK, 323 PUC_PORT_1S1P, 0x18, 4, 0, 324 }, 325 326 { 0x131f, 0x1012, 0xffff, 0, 327 "SIIG Cyber I/O PCI 16C850 (10x family)", 328 DEFAULT_RCLK, 329 PUC_PORT_1S1P, 0x18, 4, 0, 330 }, 331 332 { 0x131f, 0x1021, 0xffff, 0, 333 "SIIG Cyber Parallel Dual PCI (10x family)", 334 0, 335 PUC_PORT_2P, 0x18, 8, 0, 336 }, 337 338 { 0x131f, 0x1030, 0xffff, 0, 339 "SIIG Cyber Serial Dual PCI 16C550 (10x family)", 340 DEFAULT_RCLK, 341 PUC_PORT_2S, 0x18, 4, 0, 342 }, 343 344 { 0x131f, 0x1031, 0xffff, 0, 345 "SIIG Cyber Serial Dual PCI 16C650 (10x family)", 346 DEFAULT_RCLK, 347 PUC_PORT_2S, 0x18, 4, 0, 348 }, 349 350 { 0x131f, 0x1032, 0xffff, 0, 351 "SIIG Cyber Serial Dual PCI 16C850 (10x family)", 352 DEFAULT_RCLK, 353 PUC_PORT_2S, 0x18, 4, 0, 354 }, 355 356 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */ 357 "SIIG Cyber 2S1P PCI 16C550 (10x family)", 358 DEFAULT_RCLK, 359 PUC_PORT_2S1P, 0x18, 4, 0, 360 }, 361 362 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */ 363 "SIIG Cyber 2S1P PCI 16C650 (10x family)", 364 DEFAULT_RCLK, 365 PUC_PORT_2S1P, 0x18, 4, 0, 366 }, 367 368 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */ 369 "SIIG Cyber 2S1P PCI 16C850 (10x family)", 370 DEFAULT_RCLK, 371 PUC_PORT_2S1P, 0x18, 4, 0, 372 }, 373 374 { 0x131f, 0x1050, 0xffff, 0, 375 "SIIG Cyber 4S PCI 16C550 (10x family)", 376 DEFAULT_RCLK, 377 PUC_PORT_4S, 0x18, 4, 0, 378 }, 379 380 { 0x131f, 0x1051, 0xffff, 0, 381 "SIIG Cyber 4S PCI 16C650 (10x family)", 382 DEFAULT_RCLK, 383 PUC_PORT_4S, 0x18, 4, 0, 384 }, 385 386 { 0x131f, 0x1052, 0xffff, 0, 387 "SIIG Cyber 4S PCI 16C850 (10x family)", 388 DEFAULT_RCLK, 389 PUC_PORT_4S, 0x18, 4, 0, 390 }, 391 392 { 0x131f, 0x2010, 0xffff, 0, 393 "SIIG Cyber I/O PCI 16C550 (20x family)", 394 DEFAULT_RCLK, 395 PUC_PORT_1S1P, 0x10, 4, 0, 396 }, 397 398 { 0x131f, 0x2011, 0xffff, 0, 399 "SIIG Cyber I/O PCI 16C650 (20x family)", 400 DEFAULT_RCLK, 401 PUC_PORT_1S1P, 0x10, 4, 0, 402 }, 403 404 { 0x131f, 0x2012, 0xffff, 0, 405 "SIIG Cyber I/O PCI 16C850 (20x family)", 406 DEFAULT_RCLK, 407 PUC_PORT_1S1P, 0x10, 4, 0, 408 }, 409 410 { 0x131f, 0x2021, 0xffff, 0, 411 "SIIG Cyber Parallel Dual PCI (20x family)", 412 0, 413 PUC_PORT_2P, 0x10, 8, 0, 414 }, 415 416 { 0x131f, 0x2030, 0xffff, 0, 417 "SIIG Cyber Serial Dual PCI 16C550 (20x family)", 418 DEFAULT_RCLK, 419 PUC_PORT_2S, 0x10, 4, 0, 420 }, 421 422 { 0x131f, 0x2031, 0xffff, 0, 423 "SIIG Cyber Serial Dual PCI 16C650 (20x family)", 424 DEFAULT_RCLK, 425 PUC_PORT_2S, 0x10, 4, 0, 426 }, 427 428 { 0x131f, 0x2032, 0xffff, 0, 429 "SIIG Cyber Serial Dual PCI 16C850 (20x family)", 430 DEFAULT_RCLK, 431 PUC_PORT_2S, 0x10, 4, 0, 432 }, 433 434 { 0x131f, 0x2040, 0xffff, 0, 435 "SIIG Cyber 2P1S PCI 16C550 (20x family)", 436 DEFAULT_RCLK, 437 PUC_PORT_1S2P, 0x10, -1, 0, 438 .config_function = puc_config_siig 439 }, 440 441 { 0x131f, 0x2041, 0xffff, 0, 442 "SIIG Cyber 2P1S PCI 16C650 (20x family)", 443 DEFAULT_RCLK, 444 PUC_PORT_1S2P, 0x10, -1, 0, 445 .config_function = puc_config_siig 446 }, 447 448 { 0x131f, 0x2042, 0xffff, 0, 449 "SIIG Cyber 2P1S PCI 16C850 (20x family)", 450 DEFAULT_RCLK, 451 PUC_PORT_1S2P, 0x10, -1, 0, 452 .config_function = puc_config_siig 453 }, 454 455 { 0x131f, 0x2050, 0xffff, 0, 456 "SIIG Cyber 4S PCI 16C550 (20x family)", 457 DEFAULT_RCLK, 458 PUC_PORT_4S, 0x10, 4, 0, 459 }, 460 461 { 0x131f, 0x2051, 0xffff, 0, 462 "SIIG Cyber 4S PCI 16C650 (20x family)", 463 DEFAULT_RCLK, 464 PUC_PORT_4S, 0x10, 4, 0, 465 }, 466 467 { 0x131f, 0x2052, 0xffff, 0, 468 "SIIG Cyber 4S PCI 16C850 (20x family)", 469 DEFAULT_RCLK, 470 PUC_PORT_4S, 0x10, 4, 0, 471 }, 472 473 { 0x131f, 0x2060, 0xffff, 0, 474 "SIIG Cyber 2S1P PCI 16C550 (20x family)", 475 DEFAULT_RCLK, 476 PUC_PORT_2S1P, 0x10, 4, 0, 477 }, 478 479 { 0x131f, 0x2061, 0xffff, 0, 480 "SIIG Cyber 2S1P PCI 16C650 (20x family)", 481 DEFAULT_RCLK, 482 PUC_PORT_2S1P, 0x10, 4, 0, 483 }, 484 485 { 0x131f, 0x2062, 0xffff, 0, 486 "SIIG Cyber 2S1P PCI 16C850 (20x family)", 487 DEFAULT_RCLK, 488 PUC_PORT_2S1P, 0x10, 4, 0, 489 }, 490 491 { 0x131f, 0x2081, 0xffff, 0, 492 "SIIG PS8000 8S PCI 16C650 (20x family)", 493 DEFAULT_RCLK, 494 PUC_PORT_8S, 0x10, -1, -1, 495 .config_function = puc_config_siig 496 }, 497 498 { 0x135c, 0x0010, 0xffff, 0, 499 "Quatech QSC-100", 500 -3, /* max 8x clock rate */ 501 PUC_PORT_4S, 0x14, 0, 8, 502 .config_function = puc_config_quatech 503 }, 504 505 { 0x135c, 0x0020, 0xffff, 0, 506 "Quatech DSC-100", 507 -1, /* max 2x clock rate */ 508 PUC_PORT_2S, 0x14, 0, 8, 509 .config_function = puc_config_quatech 510 }, 511 512 { 0x135c, 0x0030, 0xffff, 0, 513 "Quatech DSC-200/300", 514 -1, /* max 2x clock rate */ 515 PUC_PORT_2S, 0x14, 0, 8, 516 .config_function = puc_config_quatech 517 }, 518 519 { 0x135c, 0x0040, 0xffff, 0, 520 "Quatech QSC-200/300", 521 -3, /* max 8x clock rate */ 522 PUC_PORT_4S, 0x14, 0, 8, 523 .config_function = puc_config_quatech 524 }, 525 526 { 0x135c, 0x0050, 0xffff, 0, 527 "Quatech ESC-100D", 528 -3, /* max 8x clock rate */ 529 PUC_PORT_8S, 0x14, 0, 8, 530 .config_function = puc_config_quatech 531 }, 532 533 { 0x135c, 0x0060, 0xffff, 0, 534 "Quatech ESC-100M", 535 -3, /* max 8x clock rate */ 536 PUC_PORT_8S, 0x14, 0, 8, 537 .config_function = puc_config_quatech 538 }, 539 540 { 0x135c, 0x0170, 0xffff, 0, 541 "Quatech QSCLP-100", 542 -1, /* max 2x clock rate */ 543 PUC_PORT_4S, 0x18, 0, 8, 544 .config_function = puc_config_quatech 545 }, 546 547 { 0x135c, 0x0180, 0xffff, 0, 548 "Quatech DSCLP-100", 549 -1, /* max 3x clock rate */ 550 PUC_PORT_2S, 0x18, 0, 8, 551 .config_function = puc_config_quatech 552 }, 553 554 { 0x135c, 0x01b0, 0xffff, 0, 555 "Quatech DSCLP-200/300", 556 -1, /* max 2x clock rate */ 557 PUC_PORT_2S, 0x18, 0, 8, 558 .config_function = puc_config_quatech 559 }, 560 561 { 0x135c, 0x01e0, 0xffff, 0, 562 "Quatech ESCLP-100", 563 -3, /* max 8x clock rate */ 564 PUC_PORT_8S, 0x10, 0, 8, 565 .config_function = puc_config_quatech 566 }, 567 568 { 0x1393, 0x1024, 0xffff, 0, 569 "Moxa Technologies, Smartio CP-102E/PCIe", 570 DEFAULT_RCLK * 8, 571 PUC_PORT_2S, 0x14, 0, -1, 572 .config_function = puc_config_moxa 573 }, 574 575 { 0x1393, 0x1025, 0xffff, 0, 576 "Moxa Technologies, Smartio CP-102EL/PCIe", 577 DEFAULT_RCLK * 8, 578 PUC_PORT_2S, 0x14, 0, -1, 579 .config_function = puc_config_moxa 580 }, 581 582 { 0x1393, 0x1040, 0xffff, 0, 583 "Moxa Technologies, Smartio C104H/PCI", 584 DEFAULT_RCLK * 8, 585 PUC_PORT_4S, 0x18, 0, 8, 586 }, 587 588 { 0x1393, 0x1041, 0xffff, 0, 589 "Moxa Technologies, Smartio CP-104UL/PCI", 590 DEFAULT_RCLK * 8, 591 PUC_PORT_4S, 0x18, 0, 8, 592 }, 593 594 { 0x1393, 0x1042, 0xffff, 0, 595 "Moxa Technologies, Smartio CP-104JU/PCI", 596 DEFAULT_RCLK * 8, 597 PUC_PORT_4S, 0x18, 0, 8, 598 }, 599 600 { 0x1393, 0x1043, 0xffff, 0, 601 "Moxa Technologies, Smartio CP-104EL/PCIe", 602 DEFAULT_RCLK * 8, 603 PUC_PORT_4S, 0x18, 0, 8, 604 }, 605 606 { 0x1393, 0x1045, 0xffff, 0, 607 "Moxa Technologies, Smartio CP-104EL-A/PCIe", 608 DEFAULT_RCLK * 8, 609 PUC_PORT_4S, 0x14, 0, -1, 610 .config_function = puc_config_moxa 611 }, 612 613 { 0x1393, 0x1120, 0xffff, 0, 614 "Moxa Technologies, CP-112UL", 615 DEFAULT_RCLK * 8, 616 PUC_PORT_2S, 0x18, 0, 8, 617 }, 618 619 { 0x1393, 0x1141, 0xffff, 0, 620 "Moxa Technologies, Industio CP-114", 621 DEFAULT_RCLK * 8, 622 PUC_PORT_4S, 0x18, 0, 8, 623 }, 624 625 { 0x1393, 0x1144, 0xffff, 0, 626 "Moxa Technologies, Smartio CP-114EL/PCIe", 627 DEFAULT_RCLK * 8, 628 PUC_PORT_4S, 0x14, 0, -1, 629 .config_function = puc_config_moxa 630 }, 631 632 { 0x1393, 0x1182, 0xffff, 0, 633 "Moxa Technologies, Smartio CP-118EL-A/PCIe", 634 DEFAULT_RCLK * 8, 635 PUC_PORT_8S, 0x14, 0, -1, 636 .config_function = puc_config_moxa 637 }, 638 639 { 0x1393, 0x1680, 0xffff, 0, 640 "Moxa Technologies, C168H/PCI", 641 DEFAULT_RCLK * 8, 642 PUC_PORT_8S, 0x18, 0, 8, 643 }, 644 645 { 0x1393, 0x1681, 0xffff, 0, 646 "Moxa Technologies, C168U/PCI", 647 DEFAULT_RCLK * 8, 648 PUC_PORT_8S, 0x18, 0, 8, 649 }, 650 651 { 0x1393, 0x1682, 0xffff, 0, 652 "Moxa Technologies, CP-168EL/PCIe", 653 DEFAULT_RCLK * 8, 654 PUC_PORT_8S, 0x18, 0, 8, 655 }, 656 657 { 0x1393, 0x1683, 0xffff, 0, 658 "Moxa Technologies, Smartio CP-168EL-A/PCIe", 659 DEFAULT_RCLK * 8, 660 PUC_PORT_8S, 0x14, 0, -1, 661 .config_function = puc_config_moxa 662 }, 663 664 { 0x13a8, 0x0152, 0xffff, 0, 665 "Exar XR17C/D152", 666 DEFAULT_RCLK * 8, 667 PUC_PORT_2S, 0x10, 0, -1, 668 .config_function = puc_config_exar 669 }, 670 671 { 0x13a8, 0x0154, 0xffff, 0, 672 "Exar XR17C154", 673 DEFAULT_RCLK * 8, 674 PUC_PORT_4S, 0x10, 0, -1, 675 .config_function = puc_config_exar 676 }, 677 678 { 0x13a8, 0x0158, 0xffff, 0, 679 "Exar XR17C158", 680 DEFAULT_RCLK * 8, 681 PUC_PORT_8S, 0x10, 0, -1, 682 .config_function = puc_config_exar 683 }, 684 685 { 0x13a8, 0x0258, 0xffff, 0, 686 "Exar XR17V258IV", 687 DEFAULT_RCLK * 8, 688 PUC_PORT_8S, 0x10, 0, -1, 689 .config_function = puc_config_exar 690 }, 691 692 { 0x13a8, 0x0352, 0xffff, 0, 693 "Exar XR17V352", 694 125000000, 695 PUC_PORT_2S, 0x10, 0, -1, 696 .config_function = puc_config_exar_pcie 697 }, 698 699 /* The XR17V358 uses the 125MHz PCIe clock as its reference clock. */ 700 { 0x13a8, 0x0358, 0xffff, 0, 701 "Exar XR17V358", 702 125000000, 703 PUC_PORT_8S, 0x10, 0, -1, 704 .config_function = puc_config_exar_pcie 705 }, 706 707 /* 708 * The Advantech PCI-1602 Rev. A use the first two ports of an Oxford 709 * Semiconductor OXuPCI954. Note these boards have a hardware bug in 710 * that they drive the RS-422/485 transmitters after power-on until a 711 * driver initializes the UARTs. 712 */ 713 { 0x13fe, 0x1600, 0x1602, 0x0002, 714 "Advantech PCI-1602 Rev. A", 715 DEFAULT_RCLK * 8, 716 PUC_PORT_2S, 0x10, 0, 8, 717 .config_function = puc_config_advantech 718 }, 719 720 /* Advantech PCI-1602 Rev. B1/PCI-1603 are also based on OXuPCI952. */ 721 { 0x13fe, 0xa102, 0x13fe, 0xa102, 722 "Advantech 2-port PCI (PCI-1602 Rev. B1/PCI-1603)", 723 DEFAULT_RCLK * 8, 724 PUC_PORT_2S, 0x10, 4, 0, 725 .config_function = puc_config_advantech 726 }, 727 728 { 0x1407, 0x0100, 0xffff, 0, 729 "Lava Computers Dual Serial", 730 DEFAULT_RCLK, 731 PUC_PORT_2S, 0x10, 4, 0, 732 }, 733 734 { 0x1407, 0x0101, 0xffff, 0, 735 "Lava Computers Quatro A", 736 DEFAULT_RCLK, 737 PUC_PORT_2S, 0x10, 4, 0, 738 }, 739 740 { 0x1407, 0x0102, 0xffff, 0, 741 "Lava Computers Quatro B", 742 DEFAULT_RCLK, 743 PUC_PORT_2S, 0x10, 4, 0, 744 }, 745 746 { 0x1407, 0x0120, 0xffff, 0, 747 "Lava Computers Quattro-PCI A", 748 DEFAULT_RCLK, 749 PUC_PORT_2S, 0x10, 4, 0, 750 }, 751 752 { 0x1407, 0x0121, 0xffff, 0, 753 "Lava Computers Quattro-PCI B", 754 DEFAULT_RCLK, 755 PUC_PORT_2S, 0x10, 4, 0, 756 }, 757 758 { 0x1407, 0x0180, 0xffff, 0, 759 "Lava Computers Octo A", 760 DEFAULT_RCLK, 761 PUC_PORT_4S, 0x10, 4, 0, 762 }, 763 764 { 0x1407, 0x0181, 0xffff, 0, 765 "Lava Computers Octo B", 766 DEFAULT_RCLK, 767 PUC_PORT_4S, 0x10, 4, 0, 768 }, 769 770 { 0x1409, 0x7268, 0xffff, 0, 771 "Sunix SUN1888", 772 0, 773 PUC_PORT_2P, 0x10, 0, 8, 774 }, 775 776 { 0x1409, 0x7168, 0xffff, 0, 777 NULL, 778 DEFAULT_RCLK * 8, 779 PUC_PORT_NONSTANDARD, 0x10, -1, -1, 780 .config_function = puc_config_timedia 781 }, 782 783 /* 784 * Boards with an Oxford Semiconductor chip. 785 * 786 * Oxford Semiconductor provides documentation for their chip at: 787 * <URL:http://www.plxtech.com/products/uart/> 788 * 789 * As sold by Kouwell <URL:http://www.kouwell.com/>. 790 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. 791 */ 792 { 793 0x1415, 0x9501, 0x10fc, 0xc070, 794 "I-O DATA RSA-PCI2/R", 795 DEFAULT_RCLK * 8, 796 PUC_PORT_2S, 0x10, 0, 8, 797 }, 798 799 { 0x1415, 0x9501, 0x131f, 0x2050, 800 "SIIG Cyber 4 PCI 16550", 801 DEFAULT_RCLK * 10, 802 PUC_PORT_4S, 0x10, 0, 8, 803 }, 804 805 { 0x1415, 0x9501, 0x131f, 0x2051, 806 "SIIG Cyber 4S PCI 16C650 (20x family)", 807 DEFAULT_RCLK * 10, 808 PUC_PORT_4S, 0x10, 0, 8, 809 }, 810 811 { 0x1415, 0x9501, 0x131f, 0x2052, 812 "SIIG Quartet Serial 850", 813 DEFAULT_RCLK * 10, 814 PUC_PORT_4S, 0x10, 0, 8, 815 }, 816 817 { 0x1415, 0x9501, 0x14db, 0x2150, 818 "Kuroutoshikou SERIAL4P-LPPCI2", 819 DEFAULT_RCLK * 10, 820 PUC_PORT_4S, 0x10, 0, 8, 821 }, 822 823 { 0x1415, 0x9501, 0xffff, 0, 824 "Oxford Semiconductor OX16PCI954 UARTs", 825 0, 826 PUC_PORT_4S, 0x10, 0, 8, 827 .config_function = puc_config_oxford_pci954 828 }, 829 830 { 0x1415, 0x950a, 0x131f, 0x2030, 831 "SIIG Cyber 2S PCIe", 832 DEFAULT_RCLK * 10, 833 PUC_PORT_2S, 0x10, 0, 8, 834 }, 835 836 { 0x1415, 0x950a, 0x131f, 0x2032, 837 "SIIG Cyber Serial Dual PCI 16C850", 838 DEFAULT_RCLK * 10, 839 PUC_PORT_4S, 0x10, 0, 8, 840 }, 841 842 { 0x1415, 0x950a, 0x131f, 0x2061, 843 "SIIG Cyber 2SP1 PCIe", 844 DEFAULT_RCLK * 10, 845 PUC_PORT_2S, 0x10, 0, 8, 846 }, 847 848 { 0x1415, 0x950a, 0xffff, 0, 849 "Oxford Semiconductor OX16PCI954 UARTs", 850 DEFAULT_RCLK, 851 PUC_PORT_4S, 0x10, 0, 8, 852 }, 853 854 { 0x1415, 0x9511, 0xffff, 0, 855 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)", 856 DEFAULT_RCLK, 857 PUC_PORT_4S, 0x10, 0, 8, 858 }, 859 860 { 0x1415, 0x9521, 0xffff, 0, 861 "Oxford Semiconductor OX16PCI952 UARTs", 862 DEFAULT_RCLK, 863 PUC_PORT_2S, 0x10, 4, 0, 864 }, 865 866 { 0x1415, 0x9538, 0xffff, 0, 867 "Oxford Semiconductor OX16PCI958 UARTs", 868 DEFAULT_RCLK, 869 PUC_PORT_8S, 0x18, 0, 8, 870 }, 871 872 /* 873 * Perle boards use Oxford Semiconductor chips, but they store the 874 * Oxford Semiconductor device ID as a subvendor device ID and use 875 * their own device IDs. 876 */ 877 878 { 0x155f, 0x0331, 0xffff, 0, 879 "Perle Ultraport4 Express", 880 DEFAULT_RCLK * 8, 881 PUC_PORT_4S, 0x10, 0, 8, 882 }, 883 884 { 0x155f, 0xB012, 0xffff, 0, 885 "Perle Speed2 LE", 886 DEFAULT_RCLK * 8, 887 PUC_PORT_2S, 0x10, 0, 8, 888 }, 889 890 { 0x155f, 0xB022, 0xffff, 0, 891 "Perle Speed2 LE", 892 DEFAULT_RCLK * 8, 893 PUC_PORT_2S, 0x10, 0, 8, 894 }, 895 896 { 0x155f, 0xB004, 0xffff, 0, 897 "Perle Speed4 LE", 898 DEFAULT_RCLK * 8, 899 PUC_PORT_4S, 0x10, 0, 8, 900 }, 901 902 { 0x155f, 0xB008, 0xffff, 0, 903 "Perle Speed8 LE", 904 DEFAULT_RCLK * 8, 905 PUC_PORT_8S, 0x10, 0, 8, 906 }, 907 908 /* 909 * Oxford Semiconductor PCI Express Expresso family 910 * 911 * Found in many 'native' PCI Express serial boards such as: 912 * 913 * eMegatech MP954ER4 (4 port) and MP958ER8 (8 port) 914 * <URL:http://www.emegatech.com.tw/pdrs232pcie.html> 915 * 916 * Lindy 51189 (4 port) 917 * <URL:http://www.lindy.com> <URL:http://tinyurl.com/lindy-51189> 918 * 919 * StarTech.com PEX4S952 (4 port) and PEX8S952 (8 port) 920 * <URL:http://www.startech.com> 921 */ 922 923 { 0x1415, 0xc11b, 0xffff, 0, 924 "Oxford Semiconductor OXPCIe952 1S1P", 925 DEFAULT_RCLK * 0x22, 926 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 927 .config_function = puc_config_oxford_pcie 928 }, 929 930 { 0x1415, 0xc138, 0xffff, 0, 931 "Oxford Semiconductor OXPCIe952 UARTs", 932 DEFAULT_RCLK * 0x22, 933 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 934 .config_function = puc_config_oxford_pcie 935 }, 936 937 { 0x1415, 0xc158, 0xffff, 0, 938 "Oxford Semiconductor OXPCIe952 UARTs", 939 DEFAULT_RCLK * 0x22, 940 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 941 .config_function = puc_config_oxford_pcie 942 }, 943 944 { 0x1415, 0xc15d, 0xffff, 0, 945 "Oxford Semiconductor OXPCIe952 UARTs (function 1)", 946 DEFAULT_RCLK * 0x22, 947 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 948 .config_function = puc_config_oxford_pcie 949 }, 950 951 { 0x1415, 0xc208, 0xffff, 0, 952 "Oxford Semiconductor OXPCIe954 UARTs", 953 DEFAULT_RCLK * 0x22, 954 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 955 .config_function = puc_config_oxford_pcie 956 }, 957 958 { 0x1415, 0xc20d, 0xffff, 0, 959 "Oxford Semiconductor OXPCIe954 UARTs (function 1)", 960 DEFAULT_RCLK * 0x22, 961 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 962 .config_function = puc_config_oxford_pcie 963 }, 964 965 { 0x1415, 0xc308, 0xffff, 0, 966 "Oxford Semiconductor OXPCIe958 UARTs", 967 DEFAULT_RCLK * 0x22, 968 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 969 .config_function = puc_config_oxford_pcie 970 }, 971 972 { 0x1415, 0xc30d, 0xffff, 0, 973 "Oxford Semiconductor OXPCIe958 UARTs (function 1)", 974 DEFAULT_RCLK * 0x22, 975 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 976 .config_function = puc_config_oxford_pcie 977 }, 978 979 { 0x14d2, 0x8010, 0xffff, 0, 980 "VScom PCI-100L", 981 DEFAULT_RCLK * 8, 982 PUC_PORT_1S, 0x14, 0, 0, 983 }, 984 985 { 0x14d2, 0x8020, 0xffff, 0, 986 "VScom PCI-200L", 987 DEFAULT_RCLK * 8, 988 PUC_PORT_2S, 0x14, 4, 0, 989 }, 990 991 { 0x14d2, 0x8028, 0xffff, 0, 992 "VScom 200Li", 993 DEFAULT_RCLK, 994 PUC_PORT_2S, 0x20, 0, 8, 995 }, 996 997 /* 998 * VScom (Titan?) PCI-800L. More modern variant of the 999 * PCI-800. Uses 6 discrete 16550 UARTs, plus another 1000 * two of them obviously implemented as macro cells in 1001 * the ASIC. This causes the weird port access pattern 1002 * below, where two of the IO port ranges each access 1003 * one of the ASIC UARTs, and a block of IO addresses 1004 * access the external UARTs. 1005 */ 1006 { 0x14d2, 0x8080, 0xffff, 0, 1007 "Titan VScom PCI-800L", 1008 DEFAULT_RCLK * 8, 1009 PUC_PORT_8S, 0x14, -1, -1, 1010 .config_function = puc_config_titan 1011 }, 1012 1013 /* 1014 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers 1015 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has 1016 * device ID 3 and PCI device 1 device ID 4. 1017 */ 1018 { 0x14d2, 0xa003, 0xffff, 0, 1019 "Titan PCI-800H", 1020 DEFAULT_RCLK * 8, 1021 PUC_PORT_4S, 0x10, 0, 8, 1022 }, 1023 1024 { 0x14d2, 0xa004, 0xffff, 0, 1025 "Titan PCI-800H", 1026 DEFAULT_RCLK * 8, 1027 PUC_PORT_4S, 0x10, 0, 8, 1028 }, 1029 1030 { 0x14d2, 0xa005, 0xffff, 0, 1031 "Titan PCI-200H", 1032 DEFAULT_RCLK * 8, 1033 PUC_PORT_2S, 0x10, 0, 8, 1034 }, 1035 1036 { 0x14d2, 0xe020, 0xffff, 0, 1037 "Titan VScom PCI-200HV2", 1038 DEFAULT_RCLK * 8, 1039 PUC_PORT_2S, 0x10, 4, 0, 1040 }, 1041 1042 { 0x14d2, 0xa007, 0xffff, 0, 1043 "Titan VScom PCIex-800H", 1044 DEFAULT_RCLK * 8, 1045 PUC_PORT_4S, 0x10, 0, 8, 1046 }, 1047 1048 { 0x14d2, 0xa008, 0xffff, 0, 1049 "Titan VScom PCIex-800H", 1050 DEFAULT_RCLK * 8, 1051 PUC_PORT_4S, 0x10, 0, 8, 1052 }, 1053 1054 { 0x14db, 0x2130, 0xffff, 0, 1055 "Avlab Technology, PCI IO 2S", 1056 DEFAULT_RCLK, 1057 PUC_PORT_2S, 0x10, 4, 0, 1058 }, 1059 1060 { 0x14db, 0x2150, 0xffff, 0, 1061 "Avlab Low Profile PCI 4 Serial", 1062 DEFAULT_RCLK, 1063 PUC_PORT_4S, 0x10, 4, 0, 1064 }, 1065 1066 { 0x14db, 0x2152, 0xffff, 0, 1067 "Avlab Low Profile PCI 4 Serial", 1068 DEFAULT_RCLK, 1069 PUC_PORT_4S, 0x10, 4, 0, 1070 }, 1071 1072 { 0x1592, 0x0781, 0xffff, 0, 1073 "Syba Tech Ltd. PCI-4S2P-550-ECP", 1074 DEFAULT_RCLK, 1075 PUC_PORT_4S1P, 0x10, 0, -1, 1076 .config_function = puc_config_syba 1077 }, 1078 1079 { 0x1fd4, 0x1999, 0x1fd4, 0x0002, 1080 "Sunix SER5xxxx 2-port serial", 1081 DEFAULT_RCLK * 8, 1082 PUC_PORT_2S, 0x10, 0, 8, 1083 }, 1084 1085 { 0x1fd4, 0x1999, 0x1fd4, 0x0004, 1086 "Sunix SER5xxxx 4-port serial", 1087 DEFAULT_RCLK * 8, 1088 PUC_PORT_4S, 0x10, 0, 8, 1089 }, 1090 1091 { 0x1fd4, 0x1999, 0x1fd4, 0x0008, 1092 "Sunix SER5xxxx 8-port serial", 1093 DEFAULT_RCLK * 8, 1094 PUC_PORT_8S, -1, -1, -1, 1095 .config_function = puc_config_sunix 1096 }, 1097 1098 { 0x1fd4, 0x1999, 0x1fd4, 0x0101, 1099 "Sunix MIO5xxxx 1-port serial and 1284 Printer port", 1100 DEFAULT_RCLK * 8, 1101 PUC_PORT_1S1P, -1, -1, -1, 1102 .config_function = puc_config_sunix 1103 }, 1104 1105 { 0x1fd4, 0x1999, 0x1fd4, 0x0102, 1106 "Sunix MIO5xxxx 2-port serial and 1284 Printer port", 1107 DEFAULT_RCLK * 8, 1108 PUC_PORT_2S1P, -1, -1, -1, 1109 .config_function = puc_config_sunix 1110 }, 1111 1112 { 0x1fd4, 0x1999, 0x1fd4, 0x0104, 1113 "Sunix MIO5xxxx 4-port serial and 1284 Printer port", 1114 DEFAULT_RCLK * 8, 1115 PUC_PORT_4S1P, -1, -1, -1, 1116 .config_function = puc_config_sunix 1117 }, 1118 1119 { 0x5372, 0x6872, 0xffff, 0, 1120 "Feasso PCI FPP-02 2S1P", 1121 DEFAULT_RCLK, 1122 PUC_PORT_2S1P, 0x10, 4, 0, 1123 }, 1124 1125 { 0x5372, 0x6873, 0xffff, 0, 1126 "Sun 1040 PCI Quad Serial", 1127 DEFAULT_RCLK, 1128 PUC_PORT_4S, 0x10, 4, 0, 1129 }, 1130 1131 { 0x6666, 0x0001, 0xffff, 0, 1132 "Decision Computer Inc, PCCOM 4-port serial", 1133 DEFAULT_RCLK, 1134 PUC_PORT_4S, 0x1c, 0, 8, 1135 }, 1136 1137 { 0x6666, 0x0002, 0xffff, 0, 1138 "Decision Computer Inc, PCCOM 8-port serial", 1139 DEFAULT_RCLK, 1140 PUC_PORT_8S, 0x1c, 0, 8, 1141 }, 1142 1143 { 0x6666, 0x0004, 0xffff, 0, 1144 "PCCOM dual port RS232/422/485", 1145 DEFAULT_RCLK, 1146 PUC_PORT_2S, 0x1c, 0, 8, 1147 }, 1148 1149 { 0x9710, 0x9815, 0xffff, 0, 1150 "NetMos NM9815 Dual 1284 Printer port", 1151 0, 1152 PUC_PORT_2P, 0x10, 8, 0, 1153 }, 1154 1155 /* 1156 * This is more specific than the generic NM9835 entry, and is placed 1157 * here to _prevent_ puc(4) from claiming this single port card. 1158 * 1159 * uart(4) will claim this device. 1160 */ 1161 { 0x9710, 0x9835, 0x1000, 1, 1162 "NetMos NM9835 based 1-port serial", 1163 DEFAULT_RCLK, 1164 PUC_PORT_1S, 0x10, 4, 0, 1165 }, 1166 1167 { 0x9710, 0x9835, 0x1000, 2, 1168 "NetMos NM9835 based 2-port serial", 1169 DEFAULT_RCLK, 1170 PUC_PORT_2S, 0x10, 4, 0, 1171 }, 1172 1173 { 0x9710, 0x9835, 0xffff, 0, 1174 "NetMos NM9835 Dual UART and 1284 Printer port", 1175 DEFAULT_RCLK, 1176 PUC_PORT_2S1P, 0x10, 4, 0, 1177 }, 1178 1179 { 0x9710, 0x9845, 0x1000, 0x0006, 1180 "NetMos NM9845 6 Port UART", 1181 DEFAULT_RCLK, 1182 PUC_PORT_6S, 0x10, 4, 0, 1183 }, 1184 1185 { 0x9710, 0x9845, 0xffff, 0, 1186 "NetMos NM9845 Quad UART and 1284 Printer port", 1187 DEFAULT_RCLK, 1188 PUC_PORT_4S1P, 0x10, 4, 0, 1189 }, 1190 1191 { 0x9710, 0x9865, 0xa000, 0x3002, 1192 "NetMos NM9865 Dual UART", 1193 DEFAULT_RCLK, 1194 PUC_PORT_2S, 0x10, 4, 0, 1195 }, 1196 1197 { 0x9710, 0x9865, 0xa000, 0x3003, 1198 "NetMos NM9865 Triple UART", 1199 DEFAULT_RCLK, 1200 PUC_PORT_3S, 0x10, 4, 0, 1201 }, 1202 1203 { 0x9710, 0x9865, 0xa000, 0x3004, 1204 "NetMos NM9865 Quad UART", 1205 DEFAULT_RCLK, 1206 PUC_PORT_4S, 0x10, 4, 0, 1207 }, 1208 1209 { 0x9710, 0x9865, 0xa000, 0x3011, 1210 "NetMos NM9865 Single UART and 1284 Printer port", 1211 DEFAULT_RCLK, 1212 PUC_PORT_1S1P, 0x10, 4, 0, 1213 }, 1214 1215 { 0x9710, 0x9865, 0xa000, 0x3012, 1216 "NetMos NM9865 Dual UART and 1284 Printer port", 1217 DEFAULT_RCLK, 1218 PUC_PORT_2S1P, 0x10, 4, 0, 1219 }, 1220 1221 { 0x9710, 0x9865, 0xa000, 0x3020, 1222 "NetMos NM9865 Dual 1284 Printer port", 1223 DEFAULT_RCLK, 1224 PUC_PORT_2P, 0x10, 4, 0, 1225 }, 1226 1227 { 0xb00c, 0x021c, 0xffff, 0, 1228 "IC Book Labs Gunboat x4 Lite", 1229 DEFAULT_RCLK, 1230 PUC_PORT_4S, 0x10, 0, 8, 1231 .config_function = puc_config_icbook 1232 }, 1233 1234 { 0xb00c, 0x031c, 0xffff, 0, 1235 "IC Book Labs Gunboat x4 Pro", 1236 DEFAULT_RCLK, 1237 PUC_PORT_4S, 0x10, 0, 8, 1238 .config_function = puc_config_icbook 1239 }, 1240 1241 { 0xb00c, 0x041c, 0xffff, 0, 1242 "IC Book Labs Ironclad x8 Lite", 1243 DEFAULT_RCLK, 1244 PUC_PORT_8S, 0x10, 0, 8, 1245 .config_function = puc_config_icbook 1246 }, 1247 1248 { 0xb00c, 0x051c, 0xffff, 0, 1249 "IC Book Labs Ironclad x8 Pro", 1250 DEFAULT_RCLK, 1251 PUC_PORT_8S, 0x10, 0, 8, 1252 .config_function = puc_config_icbook 1253 }, 1254 1255 { 0xb00c, 0x081c, 0xffff, 0, 1256 "IC Book Labs Dreadnought x16 Pro", 1257 DEFAULT_RCLK * 8, 1258 PUC_PORT_16S, 0x10, 0, 8, 1259 .config_function = puc_config_icbook 1260 }, 1261 1262 { 0xb00c, 0x091c, 0xffff, 0, 1263 "IC Book Labs Dreadnought x16 Lite", 1264 DEFAULT_RCLK, 1265 PUC_PORT_16S, 0x10, 0, 8, 1266 .config_function = puc_config_icbook 1267 }, 1268 1269 { 0xb00c, 0x0a1c, 0xffff, 0, 1270 "IC Book Labs Gunboat x2 Low Profile", 1271 DEFAULT_RCLK, 1272 PUC_PORT_2S, 0x10, 0, 8, 1273 }, 1274 1275 { 0xb00c, 0x0b1c, 0xffff, 0, 1276 "IC Book Labs Gunboat x4 Low Profile", 1277 DEFAULT_RCLK, 1278 PUC_PORT_4S, 0x10, 0, 8, 1279 .config_function = puc_config_icbook 1280 }, 1281 { 0xffff, 0, 0xffff, 0, NULL, 0 } 1282 }; 1283 1284 static int 1285 puc_config_advantech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1286 intptr_t *res __unused) 1287 { 1288 const struct puc_cfg *cfg; 1289 struct resource *cres; 1290 struct puc_bar *bar; 1291 device_t cdev, dev; 1292 bus_size_t off; 1293 int base, crtype, fixed, high, i, oxpcie; 1294 uint8_t acr, func, mask; 1295 1296 if (cmd != PUC_CFG_SETUP) 1297 return (ENXIO); 1298 1299 base = fixed = oxpcie = 0; 1300 crtype = SYS_RES_IOPORT; 1301 acr = mask = 0x0; 1302 func = high = 1; 1303 off = 0x60; 1304 1305 cfg = sc->sc_cfg; 1306 switch (cfg->subvendor) { 1307 case 0x13fe: 1308 switch (cfg->device) { 1309 case 0xa102: 1310 high = 0; 1311 break; 1312 default: 1313 break; 1314 } 1315 default: 1316 break; 1317 } 1318 if (fixed == 1) 1319 goto setup; 1320 1321 dev = sc->sc_dev; 1322 cdev = pci_find_dbsf(pci_get_domain(dev), pci_get_bus(dev), 1323 pci_get_slot(dev), func); 1324 if (cdev == NULL) { 1325 device_printf(dev, "could not find config function\n"); 1326 return (ENXIO); 1327 } 1328 1329 i = PCIR_BAR(0); 1330 cres = bus_alloc_resource_any(cdev, crtype, &i, RF_ACTIVE); 1331 if (cres == NULL) { 1332 device_printf(dev, "could not allocate config resource\n"); 1333 return (ENXIO); 1334 } 1335 1336 if (oxpcie == 0) { 1337 mask = bus_read_1(cres, off); 1338 if (pci_get_function(dev) == 1) 1339 base = 4; 1340 } 1341 1342 setup: 1343 for (i = 0; i < sc->sc_nports; ++i) { 1344 device_printf(dev, "port %d: ", i); 1345 bar = puc_get_bar(sc, cfg->rid + i * cfg->d_rid); 1346 if (bar == NULL) { 1347 printf("could not get BAR\n"); 1348 continue; 1349 } 1350 1351 if (fixed == 0) { 1352 if ((mask & (1 << (base + i))) == 0) { 1353 acr = 0; 1354 printf("RS-232\n"); 1355 } else { 1356 acr = (high == 1 ? 0x18 : 0x10); 1357 printf("RS-422/RS-485, active-%s auto-DTR\n", 1358 high == 1 ? "high" : "low"); 1359 } 1360 } 1361 1362 bus_write_1(bar->b_res, REG_SPR, REG_ACR); 1363 bus_write_1(bar->b_res, REG_ICR, acr); 1364 } 1365 1366 bus_release_resource(cdev, crtype, rman_get_rid(cres), cres); 1367 return (0); 1368 } 1369 1370 static int 1371 puc_config_amc(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, int port, 1372 intptr_t *res) 1373 { 1374 1375 switch (cmd) { 1376 case PUC_CFG_GET_OFS: 1377 *res = 8 * (port & 1); 1378 return (0); 1379 case PUC_CFG_GET_RID: 1380 *res = 0x14 + (port >> 1) * 4; 1381 return (0); 1382 default: 1383 break; 1384 } 1385 return (ENXIO); 1386 } 1387 1388 static int 1389 puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1390 intptr_t *res) 1391 { 1392 const struct puc_cfg *cfg = sc->sc_cfg; 1393 1394 if (cmd == PUC_CFG_GET_OFS) { 1395 if (cfg->subdevice == 0x1282) /* Everest SP */ 1396 port <<= 1; 1397 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */ 1398 port = (port == 3) ? 4 : port; 1399 *res = port * 8 + ((port > 2) ? 0x18 : 0); 1400 return (0); 1401 } 1402 return (ENXIO); 1403 } 1404 1405 static int 1406 puc_config_exar(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1407 int port, intptr_t *res) 1408 { 1409 1410 if (cmd == PUC_CFG_GET_OFS) { 1411 *res = port * 0x200; 1412 return (0); 1413 } 1414 return (ENXIO); 1415 } 1416 1417 static int 1418 puc_config_exar_pcie(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1419 int port, intptr_t *res) 1420 { 1421 1422 if (cmd == PUC_CFG_GET_OFS) { 1423 *res = port * 0x400; 1424 return (0); 1425 } 1426 return (ENXIO); 1427 } 1428 1429 static int 1430 puc_config_icbook(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1431 int port __unused, intptr_t *res) 1432 { 1433 1434 if (cmd == PUC_CFG_GET_ILR) { 1435 *res = PUC_ILR_DIGI; 1436 return (0); 1437 } 1438 return (ENXIO); 1439 } 1440 1441 static int 1442 puc_config_moxa(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1443 intptr_t *res) 1444 { 1445 const struct puc_cfg *cfg = sc->sc_cfg; 1446 1447 if (cmd == PUC_CFG_GET_OFS) { 1448 if (port == 3 && (cfg->device == 0x1045 || 1449 cfg->device == 0x1144)) 1450 port = 7; 1451 *res = port * 0x200; 1452 1453 return 0; 1454 } 1455 return (ENXIO); 1456 } 1457 1458 static int 1459 puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, 1460 int port __unused, intptr_t *res) 1461 { 1462 const struct puc_cfg *cfg = sc->sc_cfg; 1463 struct puc_bar *bar; 1464 uint8_t v0, v1; 1465 1466 switch (cmd) { 1467 case PUC_CFG_SETUP: 1468 /* 1469 * Check if the scratchpad register is enabled or if the 1470 * interrupt status and options registers are active. 1471 */ 1472 bar = puc_get_bar(sc, cfg->rid); 1473 if (bar == NULL) 1474 return (ENXIO); 1475 bus_write_1(bar->b_res, REG_LCR, LCR_DLAB); 1476 bus_write_1(bar->b_res, REG_SPR, 0); 1477 v0 = bus_read_1(bar->b_res, REG_SPR); 1478 bus_write_1(bar->b_res, REG_SPR, 0x80 + -cfg->clock); 1479 v1 = bus_read_1(bar->b_res, REG_SPR); 1480 bus_write_1(bar->b_res, REG_LCR, 0); 1481 sc->sc_cfg_data = (v0 << 8) | v1; 1482 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1483 /* 1484 * The SPR register echoed the two values written 1485 * by us. This means that the SPAD jumper is set. 1486 */ 1487 device_printf(sc->sc_dev, "warning: extra features " 1488 "not usable -- SPAD compatibility enabled\n"); 1489 return (0); 1490 } 1491 if (v0 != 0) { 1492 /* 1493 * The first value doesn't match. This can only mean 1494 * that the SPAD jumper is not set and that a non- 1495 * standard fixed clock multiplier jumper is set. 1496 */ 1497 if (bootverbose) 1498 device_printf(sc->sc_dev, "fixed clock rate " 1499 "multiplier of %d\n", 1 << v0); 1500 if (v0 < -cfg->clock) 1501 device_printf(sc->sc_dev, "warning: " 1502 "suboptimal fixed clock rate multiplier " 1503 "setting\n"); 1504 return (0); 1505 } 1506 /* 1507 * The first value matched, but the second didn't. We know 1508 * that the SPAD jumper is not set. We also know that the 1509 * clock rate multiplier is software controlled *and* that 1510 * we just programmed it to the maximum allowed. 1511 */ 1512 if (bootverbose) 1513 device_printf(sc->sc_dev, "clock rate multiplier of " 1514 "%d selected\n", 1 << -cfg->clock); 1515 return (0); 1516 case PUC_CFG_GET_CLOCK: 1517 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1518 v1 = sc->sc_cfg_data & 0xff; 1519 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1520 /* 1521 * XXX With the SPAD jumper applied, there's no 1522 * easy way of knowing if there's also a clock 1523 * rate multiplier jumper installed. Let's hope 1524 * not ... 1525 */ 1526 *res = DEFAULT_RCLK; 1527 } else if (v0 == 0) { 1528 /* 1529 * No clock rate multiplier jumper installed, 1530 * so we programmed the board with the maximum 1531 * multiplier allowed as given to us in the 1532 * clock field of the config record (negated). 1533 */ 1534 *res = DEFAULT_RCLK << -cfg->clock; 1535 } else 1536 *res = DEFAULT_RCLK << v0; 1537 return (0); 1538 case PUC_CFG_GET_ILR: 1539 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1540 v1 = sc->sc_cfg_data & 0xff; 1541 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock) ? 1542 PUC_ILR_NONE : PUC_ILR_QUATECH; 1543 return (0); 1544 default: 1545 break; 1546 } 1547 return (ENXIO); 1548 } 1549 1550 static int 1551 puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1552 intptr_t *res) 1553 { 1554 static int base[] = { 0x251, 0x3f0, 0 }; 1555 const struct puc_cfg *cfg = sc->sc_cfg; 1556 struct puc_bar *bar; 1557 int efir, idx, ofs; 1558 uint8_t v; 1559 1560 switch (cmd) { 1561 case PUC_CFG_SETUP: 1562 bar = puc_get_bar(sc, cfg->rid); 1563 if (bar == NULL) 1564 return (ENXIO); 1565 1566 /* configure both W83877TFs */ 1567 bus_write_1(bar->b_res, 0x250, 0x89); 1568 bus_write_1(bar->b_res, 0x3f0, 0x87); 1569 bus_write_1(bar->b_res, 0x3f0, 0x87); 1570 idx = 0; 1571 while (base[idx] != 0) { 1572 efir = base[idx]; 1573 bus_write_1(bar->b_res, efir, 0x09); 1574 v = bus_read_1(bar->b_res, efir + 1); 1575 if ((v & 0x0f) != 0x0c) 1576 return (ENXIO); 1577 bus_write_1(bar->b_res, efir, 0x16); 1578 v = bus_read_1(bar->b_res, efir + 1); 1579 bus_write_1(bar->b_res, efir, 0x16); 1580 bus_write_1(bar->b_res, efir + 1, v | 0x04); 1581 bus_write_1(bar->b_res, efir, 0x16); 1582 bus_write_1(bar->b_res, efir + 1, v & ~0x04); 1583 ofs = base[idx] & 0x300; 1584 bus_write_1(bar->b_res, efir, 0x23); 1585 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2); 1586 bus_write_1(bar->b_res, efir, 0x24); 1587 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2); 1588 bus_write_1(bar->b_res, efir, 0x25); 1589 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2); 1590 bus_write_1(bar->b_res, efir, 0x17); 1591 bus_write_1(bar->b_res, efir + 1, 0x03); 1592 bus_write_1(bar->b_res, efir, 0x28); 1593 bus_write_1(bar->b_res, efir + 1, 0x43); 1594 idx++; 1595 } 1596 bus_write_1(bar->b_res, 0x250, 0xaa); 1597 bus_write_1(bar->b_res, 0x3f0, 0xaa); 1598 return (0); 1599 case PUC_CFG_GET_OFS: 1600 switch (port) { 1601 case 0: 1602 *res = 0x2f8; 1603 return (0); 1604 case 1: 1605 *res = 0x2e8; 1606 return (0); 1607 case 2: 1608 *res = 0x3f8; 1609 return (0); 1610 case 3: 1611 *res = 0x3e8; 1612 return (0); 1613 case 4: 1614 *res = 0x278; 1615 return (0); 1616 } 1617 break; 1618 default: 1619 break; 1620 } 1621 return (ENXIO); 1622 } 1623 1624 static int 1625 puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1626 intptr_t *res) 1627 { 1628 const struct puc_cfg *cfg = sc->sc_cfg; 1629 1630 switch (cmd) { 1631 case PUC_CFG_GET_OFS: 1632 if (cfg->ports == PUC_PORT_8S) { 1633 *res = (port > 4) ? 8 * (port - 4) : 0; 1634 return (0); 1635 } 1636 break; 1637 case PUC_CFG_GET_RID: 1638 if (cfg->ports == PUC_PORT_8S) { 1639 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port); 1640 return (0); 1641 } 1642 if (cfg->ports == PUC_PORT_2S1P) { 1643 switch (port) { 1644 case 0: *res = 0x10; return (0); 1645 case 1: *res = 0x14; return (0); 1646 case 2: *res = 0x1c; return (0); 1647 } 1648 } 1649 break; 1650 default: 1651 break; 1652 } 1653 return (ENXIO); 1654 } 1655 1656 static int 1657 puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1658 intptr_t *res) 1659 { 1660 static const uint16_t dual[] = { 1661 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 1662 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 1663 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 1664 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 1665 0xD079, 0 1666 }; 1667 static const uint16_t quad[] = { 1668 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 1669 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 1670 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 1671 0xB157, 0 1672 }; 1673 static const uint16_t octa[] = { 1674 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 1675 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 1676 }; 1677 static const struct { 1678 int ports; 1679 const uint16_t *ids; 1680 } subdevs[] = { 1681 { 2, dual }, 1682 { 4, quad }, 1683 { 8, octa }, 1684 { 0, NULL } 1685 }; 1686 static char desc[64]; 1687 int dev, id; 1688 uint16_t subdev; 1689 1690 switch (cmd) { 1691 case PUC_CFG_GET_CLOCK: 1692 if (port < 2) 1693 *res = DEFAULT_RCLK * 8; 1694 else 1695 *res = DEFAULT_RCLK; 1696 return (0); 1697 case PUC_CFG_GET_DESC: 1698 snprintf(desc, sizeof(desc), 1699 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data); 1700 *res = (intptr_t)desc; 1701 return (0); 1702 case PUC_CFG_GET_NPORTS: 1703 subdev = pci_get_subdevice(sc->sc_dev); 1704 dev = 0; 1705 while (subdevs[dev].ports != 0) { 1706 id = 0; 1707 while (subdevs[dev].ids[id] != 0) { 1708 if (subdev == subdevs[dev].ids[id]) { 1709 sc->sc_cfg_data = subdevs[dev].ports; 1710 *res = sc->sc_cfg_data; 1711 return (0); 1712 } 1713 id++; 1714 } 1715 dev++; 1716 } 1717 return (ENXIO); 1718 case PUC_CFG_GET_OFS: 1719 *res = (port == 1 || port == 3) ? 8 : 0; 1720 return (0); 1721 case PUC_CFG_GET_RID: 1722 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4; 1723 return (0); 1724 case PUC_CFG_GET_TYPE: 1725 *res = PUC_TYPE_SERIAL; 1726 return (0); 1727 default: 1728 break; 1729 } 1730 return (ENXIO); 1731 } 1732 1733 static int 1734 puc_config_oxford_pci954(struct puc_softc *sc, enum puc_cfg_cmd cmd, 1735 int port __unused, intptr_t *res) 1736 { 1737 1738 switch (cmd) { 1739 case PUC_CFG_GET_CLOCK: 1740 /* 1741 * OXu16PCI954 use a 14.7456 MHz clock by default while 1742 * OX16PCI954 and OXm16PCI954 employ a 1.8432 MHz one. 1743 */ 1744 if (pci_get_revid(sc->sc_dev) == 1) 1745 *res = DEFAULT_RCLK * 8; 1746 else 1747 *res = DEFAULT_RCLK; 1748 return (0); 1749 default: 1750 break; 1751 } 1752 return (ENXIO); 1753 } 1754 1755 static int 1756 puc_config_oxford_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1757 intptr_t *res) 1758 { 1759 const struct puc_cfg *cfg = sc->sc_cfg; 1760 int idx; 1761 struct puc_bar *bar; 1762 uint8_t value; 1763 1764 switch (cmd) { 1765 case PUC_CFG_SETUP: 1766 device_printf(sc->sc_dev, "%d UARTs detected\n", 1767 sc->sc_nports); 1768 1769 /* Set UARTs to enhanced mode */ 1770 bar = puc_get_bar(sc, cfg->rid); 1771 if (bar == NULL) 1772 return (ENXIO); 1773 for (idx = 0; idx < sc->sc_nports; idx++) { 1774 value = bus_read_1(bar->b_res, 0x1000 + (idx << 9) + 1775 0x92); 1776 bus_write_1(bar->b_res, 0x1000 + (idx << 9) + 0x92, 1777 value | 0x10); 1778 } 1779 return (0); 1780 case PUC_CFG_GET_LEN: 1781 *res = 0x200; 1782 return (0); 1783 case PUC_CFG_GET_NPORTS: 1784 /* 1785 * Check if we are being called from puc_bfe_attach() 1786 * or puc_bfe_probe(). If puc_bfe_probe(), we cannot 1787 * puc_get_bar(), so we return a value of 16. This has 1788 * cosmetic side-effects at worst; in PUC_CFG_GET_DESC, 1789 * sc->sc_cfg_data will not contain the true number of 1790 * ports in PUC_CFG_GET_DESC, but we are not implementing 1791 * that call for this device family anyway. 1792 * 1793 * The check is for initialization of sc->sc_bar[idx], 1794 * which is only done in puc_bfe_attach(). 1795 */ 1796 idx = 0; 1797 do { 1798 if (sc->sc_bar[idx++].b_rid != -1) { 1799 sc->sc_cfg_data = 16; 1800 *res = sc->sc_cfg_data; 1801 return (0); 1802 } 1803 } while (idx < PUC_PCI_BARS); 1804 1805 bar = puc_get_bar(sc, cfg->rid); 1806 if (bar == NULL) 1807 return (ENXIO); 1808 1809 value = bus_read_1(bar->b_res, 0x04); 1810 if (value == 0) 1811 return (ENXIO); 1812 1813 sc->sc_cfg_data = value; 1814 *res = sc->sc_cfg_data; 1815 return (0); 1816 case PUC_CFG_GET_OFS: 1817 *res = 0x1000 + (port << 9); 1818 return (0); 1819 case PUC_CFG_GET_TYPE: 1820 *res = PUC_TYPE_SERIAL; 1821 return (0); 1822 default: 1823 break; 1824 } 1825 return (ENXIO); 1826 } 1827 1828 static int 1829 puc_config_sunix(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1830 intptr_t *res) 1831 { 1832 int error; 1833 1834 switch (cmd) { 1835 case PUC_CFG_GET_OFS: 1836 error = puc_config(sc, PUC_CFG_GET_TYPE, port, res); 1837 if (error != 0) 1838 return (error); 1839 *res = (*res == PUC_TYPE_SERIAL) ? (port & 3) * 8 : 0; 1840 return (0); 1841 case PUC_CFG_GET_RID: 1842 error = puc_config(sc, PUC_CFG_GET_TYPE, port, res); 1843 if (error != 0) 1844 return (error); 1845 *res = (*res == PUC_TYPE_SERIAL && port <= 3) ? 0x10 : 0x14; 1846 return (0); 1847 default: 1848 break; 1849 } 1850 return (ENXIO); 1851 } 1852 1853 static int 1854 puc_config_titan(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1855 int port, intptr_t *res) 1856 { 1857 1858 switch (cmd) { 1859 case PUC_CFG_GET_OFS: 1860 *res = (port < 3) ? 0 : (port - 2) << 3; 1861 return (0); 1862 case PUC_CFG_GET_RID: 1863 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2); 1864 return (0); 1865 default: 1866 break; 1867 } 1868 return (ENXIO); 1869 } 1870