1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2006 Marcel Moolenaar 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 /* 31 * PCI "universal" communications card driver configuration data (used to 32 * match/attach the cards). 33 */ 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/bus.h> 39 #include <sys/sysctl.h> 40 41 #include <machine/resource.h> 42 #include <machine/bus.h> 43 #include <sys/rman.h> 44 45 #include <dev/ic/ns16550.h> 46 47 #include <dev/pci/pcireg.h> 48 #include <dev/pci/pcivar.h> 49 50 #include <dev/puc/puc_bus.h> 51 #include <dev/puc/puc_cfg.h> 52 #include <dev/puc/puc_bfe.h> 53 54 static puc_config_f puc_config_advantech; 55 static puc_config_f puc_config_amc; 56 static puc_config_f puc_config_diva; 57 static puc_config_f puc_config_exar; 58 static puc_config_f puc_config_exar_pcie; 59 static puc_config_f puc_config_icbook; 60 static puc_config_f puc_config_moxa; 61 static puc_config_f puc_config_oxford_pci954; 62 static puc_config_f puc_config_oxford_pcie; 63 static puc_config_f puc_config_quatech; 64 static puc_config_f puc_config_syba; 65 static puc_config_f puc_config_siig; 66 static puc_config_f puc_config_sunix; 67 static puc_config_f puc_config_timedia; 68 static puc_config_f puc_config_titan; 69 70 const struct puc_cfg puc_pci_devices[] = { 71 { 0x0009, 0x7168, 0xffff, 0, 72 "Sunix SUN1889", 73 DEFAULT_RCLK * 8, 74 PUC_PORT_2S, 0x10, 0, 8, 75 }, 76 77 { 0x103c, 0x1048, 0x103c, 0x1049, 78 "HP Diva Serial [GSP] Multiport UART - Tosca Console", 79 DEFAULT_RCLK, 80 PUC_PORT_3S, 0x10, 0, -1, 81 .config_function = puc_config_diva 82 }, 83 84 { 0x103c, 0x1048, 0x103c, 0x104a, 85 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary", 86 DEFAULT_RCLK, 87 PUC_PORT_2S, 0x10, 0, -1, 88 .config_function = puc_config_diva 89 }, 90 91 { 0x103c, 0x1048, 0x103c, 0x104b, 92 "HP Diva Serial [GSP] Multiport UART - Maestro SP2", 93 DEFAULT_RCLK, 94 PUC_PORT_4S, 0x10, 0, -1, 95 .config_function = puc_config_diva 96 }, 97 98 { 0x103c, 0x1048, 0x103c, 0x1223, 99 "HP Diva Serial [GSP] Multiport UART - Superdome Console", 100 DEFAULT_RCLK, 101 PUC_PORT_3S, 0x10, 0, -1, 102 .config_function = puc_config_diva 103 }, 104 105 { 0x103c, 0x1048, 0x103c, 0x1226, 106 "HP Diva Serial [GSP] Multiport UART - Keystone SP2", 107 DEFAULT_RCLK, 108 PUC_PORT_3S, 0x10, 0, -1, 109 .config_function = puc_config_diva 110 }, 111 112 { 0x103c, 0x1048, 0x103c, 0x1282, 113 "HP Diva Serial [GSP] Multiport UART - Everest SP2", 114 DEFAULT_RCLK, 115 PUC_PORT_3S, 0x10, 0, -1, 116 .config_function = puc_config_diva 117 }, 118 119 { 0x10b5, 0x1076, 0x10b5, 0x1076, 120 "VScom PCI-800", 121 DEFAULT_RCLK * 8, 122 PUC_PORT_8S, 0x18, 0, 8, 123 }, 124 125 { 0x10b5, 0x1077, 0x10b5, 0x1077, 126 "VScom PCI-400", 127 DEFAULT_RCLK * 8, 128 PUC_PORT_4S, 0x18, 0, 8, 129 }, 130 131 { 0x10b5, 0x1103, 0x10b5, 0x1103, 132 "VScom PCI-200", 133 DEFAULT_RCLK * 8, 134 PUC_PORT_2S, 0x18, 4, 0, 135 }, 136 137 /* 138 * Boca Research Turbo Serial 658 (8 serial port) card. 139 * Appears to be the same as Chase Research PLC PCI-FAST8 140 * and Perle PCI-FAST8 Multi-Port serial cards. 141 */ 142 { 0x10b5, 0x9050, 0x12e0, 0x0021, 143 "Boca Research Turbo Serial 658", 144 DEFAULT_RCLK * 4, 145 PUC_PORT_8S, 0x18, 0, 8, 146 }, 147 148 { 0x10b5, 0x9050, 0x12e0, 0x0031, 149 "Boca Research Turbo Serial 654", 150 DEFAULT_RCLK * 4, 151 PUC_PORT_4S, 0x18, 0, 8, 152 }, 153 154 /* 155 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with 156 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 157 * into the subsystem fields, and claims that it's a 158 * network/misc (0x02/0x80) device. 159 */ 160 { 0x10b5, 0x9050, 0xd84d, 0x6808, 161 "Dolphin Peripherals 4035", 162 DEFAULT_RCLK, 163 PUC_PORT_2S, 0x18, 4, 0, 164 }, 165 166 /* 167 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with 168 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 169 * into the subsystem fields, and claims that it's a 170 * network/misc (0x02/0x80) device. 171 */ 172 { 0x10b5, 0x9050, 0xd84d, 0x6810, 173 "Dolphin Peripherals 4014", 174 0, 175 PUC_PORT_2P, 0x20, 4, 0, 176 }, 177 178 { 0x10e8, 0x818e, 0xffff, 0, 179 "Applied Micro Circuits 8 Port UART", 180 DEFAULT_RCLK, 181 PUC_PORT_8S, 0x14, -1, -1, 182 .config_function = puc_config_amc 183 }, 184 185 /* 186 * The following members of the Digi International Neo series are 187 * based on Exar PCI chips, f. e. the 8 port variants on XR17V258IV. 188 * Accordingly, the PCIe versions of these cards incorporate a PLX 189 * PCIe-PCI-bridge. 190 */ 191 192 { 0x114f, 0x00b0, 0xffff, 0, 193 "Digi Neo PCI 4 Port", 194 DEFAULT_RCLK * 8, 195 PUC_PORT_4S, 0x10, 0, -1, 196 .config_function = puc_config_exar 197 }, 198 199 { 0x114f, 0x00b1, 0xffff, 0, 200 "Digi Neo PCI 8 Port", 201 DEFAULT_RCLK * 8, 202 PUC_PORT_8S, 0x10, 0, -1, 203 .config_function = puc_config_exar 204 }, 205 206 { 0x114f, 0x00f0, 0xffff, 0, 207 "Digi Neo PCIe 8 Port", 208 DEFAULT_RCLK * 8, 209 PUC_PORT_8S, 0x10, 0, -1, 210 .config_function = puc_config_exar 211 }, 212 213 { 0x114f, 0x00f1, 0xffff, 0, 214 "Digi Neo PCIe 4 Port", 215 DEFAULT_RCLK * 8, 216 PUC_PORT_4S, 0x10, 0, -1, 217 .config_function = puc_config_exar 218 }, 219 220 { 0x114f, 0x00f2, 0xffff, 0, 221 "Digi Neo PCIe 4 Port RJ45", 222 DEFAULT_RCLK * 8, 223 PUC_PORT_4S, 0x10, 0, -1, 224 .config_function = puc_config_exar 225 }, 226 227 { 0x114f, 0x00f3, 0xffff, 0, 228 "Digi Neo PCIe 8 Port RJ45", 229 DEFAULT_RCLK * 8, 230 PUC_PORT_8S, 0x10, 0, -1, 231 .config_function = puc_config_exar 232 }, 233 234 { 0x11fe, 0x8010, 0xffff, 0, 235 "Comtrol RocketPort 550/8 RJ11 part A", 236 DEFAULT_RCLK * 4, 237 PUC_PORT_4S, 0x10, 0, 8, 238 }, 239 240 { 0x11fe, 0x8011, 0xffff, 0, 241 "Comtrol RocketPort 550/8 RJ11 part B", 242 DEFAULT_RCLK * 4, 243 PUC_PORT_4S, 0x10, 0, 8, 244 }, 245 246 { 0x11fe, 0x8012, 0xffff, 0, 247 "Comtrol RocketPort 550/8 Octa part A", 248 DEFAULT_RCLK * 4, 249 PUC_PORT_4S, 0x10, 0, 8, 250 }, 251 252 { 0x11fe, 0x8013, 0xffff, 0, 253 "Comtrol RocketPort 550/8 Octa part B", 254 DEFAULT_RCLK * 4, 255 PUC_PORT_4S, 0x10, 0, 8, 256 }, 257 258 { 0x11fe, 0x8014, 0xffff, 0, 259 "Comtrol RocketPort 550/4 RJ45", 260 DEFAULT_RCLK * 4, 261 PUC_PORT_4S, 0x10, 0, 8, 262 }, 263 264 { 0x11fe, 0x8015, 0xffff, 0, 265 "Comtrol RocketPort 550/Quad", 266 DEFAULT_RCLK * 4, 267 PUC_PORT_4S, 0x10, 0, 8, 268 }, 269 270 { 0x11fe, 0x8016, 0xffff, 0, 271 "Comtrol RocketPort 550/16 part A", 272 DEFAULT_RCLK * 4, 273 PUC_PORT_4S, 0x10, 0, 8, 274 }, 275 276 { 0x11fe, 0x8017, 0xffff, 0, 277 "Comtrol RocketPort 550/16 part B", 278 DEFAULT_RCLK * 4, 279 PUC_PORT_12S, 0x10, 0, 8, 280 }, 281 282 { 0x11fe, 0x8018, 0xffff, 0, 283 "Comtrol RocketPort 550/8 part A", 284 DEFAULT_RCLK * 4, 285 PUC_PORT_4S, 0x10, 0, 8, 286 }, 287 288 { 0x11fe, 0x8019, 0xffff, 0, 289 "Comtrol RocketPort 550/8 part B", 290 DEFAULT_RCLK * 4, 291 PUC_PORT_4S, 0x10, 0, 8, 292 }, 293 294 /* 295 * IBM SurePOS 300 Series (481033H) serial ports 296 * Details can be found on the IBM RSS websites 297 */ 298 299 { 0x1014, 0x0297, 0xffff, 0, 300 "IBM SurePOS 300 Series (481033H) serial ports", 301 DEFAULT_RCLK, 302 PUC_PORT_4S, 0x10, 4, 0 303 }, 304 305 /* 306 * SIIG Boards. 307 * 308 * SIIG provides documentation for their boards at: 309 * <URL:http://www.siig.com/downloads.asp> 310 */ 311 312 { 0x131f, 0x1010, 0xffff, 0, 313 "SIIG Cyber I/O PCI 16C550 (10x family)", 314 DEFAULT_RCLK, 315 PUC_PORT_1S1P, 0x18, 4, 0, 316 }, 317 318 { 0x131f, 0x1011, 0xffff, 0, 319 "SIIG Cyber I/O PCI 16C650 (10x family)", 320 DEFAULT_RCLK, 321 PUC_PORT_1S1P, 0x18, 4, 0, 322 }, 323 324 { 0x131f, 0x1012, 0xffff, 0, 325 "SIIG Cyber I/O PCI 16C850 (10x family)", 326 DEFAULT_RCLK, 327 PUC_PORT_1S1P, 0x18, 4, 0, 328 }, 329 330 { 0x131f, 0x1021, 0xffff, 0, 331 "SIIG Cyber Parallel Dual PCI (10x family)", 332 0, 333 PUC_PORT_2P, 0x18, 8, 0, 334 }, 335 336 { 0x131f, 0x1030, 0xffff, 0, 337 "SIIG Cyber Serial Dual PCI 16C550 (10x family)", 338 DEFAULT_RCLK, 339 PUC_PORT_2S, 0x18, 4, 0, 340 }, 341 342 { 0x131f, 0x1031, 0xffff, 0, 343 "SIIG Cyber Serial Dual PCI 16C650 (10x family)", 344 DEFAULT_RCLK, 345 PUC_PORT_2S, 0x18, 4, 0, 346 }, 347 348 { 0x131f, 0x1032, 0xffff, 0, 349 "SIIG Cyber Serial Dual PCI 16C850 (10x family)", 350 DEFAULT_RCLK, 351 PUC_PORT_2S, 0x18, 4, 0, 352 }, 353 354 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */ 355 "SIIG Cyber 2S1P PCI 16C550 (10x family)", 356 DEFAULT_RCLK, 357 PUC_PORT_2S1P, 0x18, 4, 0, 358 }, 359 360 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */ 361 "SIIG Cyber 2S1P PCI 16C650 (10x family)", 362 DEFAULT_RCLK, 363 PUC_PORT_2S1P, 0x18, 4, 0, 364 }, 365 366 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */ 367 "SIIG Cyber 2S1P PCI 16C850 (10x family)", 368 DEFAULT_RCLK, 369 PUC_PORT_2S1P, 0x18, 4, 0, 370 }, 371 372 { 0x131f, 0x1050, 0xffff, 0, 373 "SIIG Cyber 4S PCI 16C550 (10x family)", 374 DEFAULT_RCLK, 375 PUC_PORT_4S, 0x18, 4, 0, 376 }, 377 378 { 0x131f, 0x1051, 0xffff, 0, 379 "SIIG Cyber 4S PCI 16C650 (10x family)", 380 DEFAULT_RCLK, 381 PUC_PORT_4S, 0x18, 4, 0, 382 }, 383 384 { 0x131f, 0x1052, 0xffff, 0, 385 "SIIG Cyber 4S PCI 16C850 (10x family)", 386 DEFAULT_RCLK, 387 PUC_PORT_4S, 0x18, 4, 0, 388 }, 389 390 { 0x131f, 0x2010, 0xffff, 0, 391 "SIIG Cyber I/O PCI 16C550 (20x family)", 392 DEFAULT_RCLK, 393 PUC_PORT_1S1P, 0x10, 4, 0, 394 }, 395 396 { 0x131f, 0x2011, 0xffff, 0, 397 "SIIG Cyber I/O PCI 16C650 (20x family)", 398 DEFAULT_RCLK, 399 PUC_PORT_1S1P, 0x10, 4, 0, 400 }, 401 402 { 0x131f, 0x2012, 0xffff, 0, 403 "SIIG Cyber I/O PCI 16C850 (20x family)", 404 DEFAULT_RCLK, 405 PUC_PORT_1S1P, 0x10, 4, 0, 406 }, 407 408 { 0x131f, 0x2021, 0xffff, 0, 409 "SIIG Cyber Parallel Dual PCI (20x family)", 410 0, 411 PUC_PORT_2P, 0x10, 8, 0, 412 }, 413 414 { 0x131f, 0x2030, 0xffff, 0, 415 "SIIG Cyber Serial Dual PCI 16C550 (20x family)", 416 DEFAULT_RCLK, 417 PUC_PORT_2S, 0x10, 4, 0, 418 }, 419 420 { 0x131f, 0x2031, 0xffff, 0, 421 "SIIG Cyber Serial Dual PCI 16C650 (20x family)", 422 DEFAULT_RCLK, 423 PUC_PORT_2S, 0x10, 4, 0, 424 }, 425 426 { 0x131f, 0x2032, 0xffff, 0, 427 "SIIG Cyber Serial Dual PCI 16C850 (20x family)", 428 DEFAULT_RCLK, 429 PUC_PORT_2S, 0x10, 4, 0, 430 }, 431 432 { 0x131f, 0x2040, 0xffff, 0, 433 "SIIG Cyber 2P1S PCI 16C550 (20x family)", 434 DEFAULT_RCLK, 435 PUC_PORT_1S2P, 0x10, -1, 0, 436 .config_function = puc_config_siig 437 }, 438 439 { 0x131f, 0x2041, 0xffff, 0, 440 "SIIG Cyber 2P1S PCI 16C650 (20x family)", 441 DEFAULT_RCLK, 442 PUC_PORT_1S2P, 0x10, -1, 0, 443 .config_function = puc_config_siig 444 }, 445 446 { 0x131f, 0x2042, 0xffff, 0, 447 "SIIG Cyber 2P1S PCI 16C850 (20x family)", 448 DEFAULT_RCLK, 449 PUC_PORT_1S2P, 0x10, -1, 0, 450 .config_function = puc_config_siig 451 }, 452 453 { 0x131f, 0x2050, 0xffff, 0, 454 "SIIG Cyber 4S PCI 16C550 (20x family)", 455 DEFAULT_RCLK, 456 PUC_PORT_4S, 0x10, 4, 0, 457 }, 458 459 { 0x131f, 0x2051, 0xffff, 0, 460 "SIIG Cyber 4S PCI 16C650 (20x family)", 461 DEFAULT_RCLK, 462 PUC_PORT_4S, 0x10, 4, 0, 463 }, 464 465 { 0x131f, 0x2052, 0xffff, 0, 466 "SIIG Cyber 4S PCI 16C850 (20x family)", 467 DEFAULT_RCLK, 468 PUC_PORT_4S, 0x10, 4, 0, 469 }, 470 471 { 0x131f, 0x2060, 0xffff, 0, 472 "SIIG Cyber 2S1P PCI 16C550 (20x family)", 473 DEFAULT_RCLK, 474 PUC_PORT_2S1P, 0x10, 4, 0, 475 }, 476 477 { 0x131f, 0x2061, 0xffff, 0, 478 "SIIG Cyber 2S1P PCI 16C650 (20x family)", 479 DEFAULT_RCLK, 480 PUC_PORT_2S1P, 0x10, 4, 0, 481 }, 482 483 { 0x131f, 0x2062, 0xffff, 0, 484 "SIIG Cyber 2S1P PCI 16C850 (20x family)", 485 DEFAULT_RCLK, 486 PUC_PORT_2S1P, 0x10, 4, 0, 487 }, 488 489 { 0x131f, 0x2081, 0xffff, 0, 490 "SIIG PS8000 8S PCI 16C650 (20x family)", 491 DEFAULT_RCLK, 492 PUC_PORT_8S, 0x10, -1, -1, 493 .config_function = puc_config_siig 494 }, 495 496 { 0x135c, 0x0010, 0xffff, 0, 497 "Quatech QSC-100", 498 -3, /* max 8x clock rate */ 499 PUC_PORT_4S, 0x14, 0, 8, 500 .config_function = puc_config_quatech 501 }, 502 503 { 0x135c, 0x0020, 0xffff, 0, 504 "Quatech DSC-100", 505 -1, /* max 2x clock rate */ 506 PUC_PORT_2S, 0x14, 0, 8, 507 .config_function = puc_config_quatech 508 }, 509 510 { 0x135c, 0x0030, 0xffff, 0, 511 "Quatech DSC-200/300", 512 -1, /* max 2x clock rate */ 513 PUC_PORT_2S, 0x14, 0, 8, 514 .config_function = puc_config_quatech 515 }, 516 517 { 0x135c, 0x0040, 0xffff, 0, 518 "Quatech QSC-200/300", 519 -3, /* max 8x clock rate */ 520 PUC_PORT_4S, 0x14, 0, 8, 521 .config_function = puc_config_quatech 522 }, 523 524 { 0x135c, 0x0050, 0xffff, 0, 525 "Quatech ESC-100D", 526 -3, /* max 8x clock rate */ 527 PUC_PORT_8S, 0x14, 0, 8, 528 .config_function = puc_config_quatech 529 }, 530 531 { 0x135c, 0x0060, 0xffff, 0, 532 "Quatech ESC-100M", 533 -3, /* max 8x clock rate */ 534 PUC_PORT_8S, 0x14, 0, 8, 535 .config_function = puc_config_quatech 536 }, 537 538 { 0x135c, 0x0170, 0xffff, 0, 539 "Quatech QSCLP-100", 540 -1, /* max 2x clock rate */ 541 PUC_PORT_4S, 0x18, 0, 8, 542 .config_function = puc_config_quatech 543 }, 544 545 { 0x135c, 0x0180, 0xffff, 0, 546 "Quatech DSCLP-100", 547 -1, /* max 3x clock rate */ 548 PUC_PORT_2S, 0x18, 0, 8, 549 .config_function = puc_config_quatech 550 }, 551 552 { 0x135c, 0x01b0, 0xffff, 0, 553 "Quatech DSCLP-200/300", 554 -1, /* max 2x clock rate */ 555 PUC_PORT_2S, 0x18, 0, 8, 556 .config_function = puc_config_quatech 557 }, 558 559 { 0x135c, 0x01e0, 0xffff, 0, 560 "Quatech ESCLP-100", 561 -3, /* max 8x clock rate */ 562 PUC_PORT_8S, 0x10, 0, 8, 563 .config_function = puc_config_quatech 564 }, 565 566 { 0x1393, 0x1024, 0xffff, 0, 567 "Moxa Technologies, Smartio CP-102E/PCIe", 568 DEFAULT_RCLK * 8, 569 PUC_PORT_2S, 0x14, 0, -1, 570 .config_function = puc_config_moxa 571 }, 572 573 { 0x1393, 0x1025, 0xffff, 0, 574 "Moxa Technologies, Smartio CP-102EL/PCIe", 575 DEFAULT_RCLK * 8, 576 PUC_PORT_2S, 0x14, 0, -1, 577 .config_function = puc_config_moxa 578 }, 579 580 { 0x1393, 0x1040, 0xffff, 0, 581 "Moxa Technologies, Smartio C104H/PCI", 582 DEFAULT_RCLK * 8, 583 PUC_PORT_4S, 0x18, 0, 8, 584 }, 585 586 { 0x1393, 0x1041, 0xffff, 0, 587 "Moxa Technologies, Smartio CP-104UL/PCI", 588 DEFAULT_RCLK * 8, 589 PUC_PORT_4S, 0x18, 0, 8, 590 }, 591 592 { 0x1393, 0x1042, 0xffff, 0, 593 "Moxa Technologies, Smartio CP-104JU/PCI", 594 DEFAULT_RCLK * 8, 595 PUC_PORT_4S, 0x18, 0, 8, 596 }, 597 598 { 0x1393, 0x1043, 0xffff, 0, 599 "Moxa Technologies, Smartio CP-104EL/PCIe", 600 DEFAULT_RCLK * 8, 601 PUC_PORT_4S, 0x18, 0, 8, 602 }, 603 604 { 0x1393, 0x1045, 0xffff, 0, 605 "Moxa Technologies, Smartio CP-104EL-A/PCIe", 606 DEFAULT_RCLK * 8, 607 PUC_PORT_4S, 0x14, 0, -1, 608 .config_function = puc_config_moxa 609 }, 610 611 { 0x1393, 0x1120, 0xffff, 0, 612 "Moxa Technologies, CP-112UL", 613 DEFAULT_RCLK * 8, 614 PUC_PORT_2S, 0x18, 0, 8, 615 }, 616 617 { 0x1393, 0x1141, 0xffff, 0, 618 "Moxa Technologies, Industio CP-114", 619 DEFAULT_RCLK * 8, 620 PUC_PORT_4S, 0x18, 0, 8, 621 }, 622 623 { 0x1393, 0x1144, 0xffff, 0, 624 "Moxa Technologies, Smartio CP-114EL/PCIe", 625 DEFAULT_RCLK * 8, 626 PUC_PORT_4S, 0x14, 0, -1, 627 .config_function = puc_config_moxa 628 }, 629 630 { 0x1393, 0x1182, 0xffff, 0, 631 "Moxa Technologies, Smartio CP-118EL-A/PCIe", 632 DEFAULT_RCLK * 8, 633 PUC_PORT_8S, 0x14, 0, -1, 634 .config_function = puc_config_moxa 635 }, 636 637 { 0x1393, 0x1680, 0xffff, 0, 638 "Moxa Technologies, C168H/PCI", 639 DEFAULT_RCLK * 8, 640 PUC_PORT_8S, 0x18, 0, 8, 641 }, 642 643 { 0x1393, 0x1681, 0xffff, 0, 644 "Moxa Technologies, C168U/PCI", 645 DEFAULT_RCLK * 8, 646 PUC_PORT_8S, 0x18, 0, 8, 647 }, 648 649 { 0x1393, 0x1682, 0xffff, 0, 650 "Moxa Technologies, CP-168EL/PCIe", 651 DEFAULT_RCLK * 8, 652 PUC_PORT_8S, 0x18, 0, 8, 653 }, 654 655 { 0x1393, 0x1683, 0xffff, 0, 656 "Moxa Technologies, Smartio CP-168EL-A/PCIe", 657 DEFAULT_RCLK * 8, 658 PUC_PORT_8S, 0x14, 0, -1, 659 .config_function = puc_config_moxa 660 }, 661 662 { 0x13a8, 0x0152, 0xffff, 0, 663 "Exar XR17C/D152", 664 DEFAULT_RCLK * 8, 665 PUC_PORT_2S, 0x10, 0, -1, 666 .config_function = puc_config_exar 667 }, 668 669 { 0x13a8, 0x0154, 0xffff, 0, 670 "Exar XR17C154", 671 DEFAULT_RCLK * 8, 672 PUC_PORT_4S, 0x10, 0, -1, 673 .config_function = puc_config_exar 674 }, 675 676 { 0x13a8, 0x0158, 0xffff, 0, 677 "Exar XR17C158", 678 DEFAULT_RCLK * 8, 679 PUC_PORT_8S, 0x10, 0, -1, 680 .config_function = puc_config_exar 681 }, 682 683 { 0x13a8, 0x0258, 0xffff, 0, 684 "Exar XR17V258IV", 685 DEFAULT_RCLK * 8, 686 PUC_PORT_8S, 0x10, 0, -1, 687 .config_function = puc_config_exar 688 }, 689 690 { 0x13a8, 0x0352, 0xffff, 0, 691 "Exar XR17V352", 692 125000000, 693 PUC_PORT_2S, 0x10, 0, -1, 694 .config_function = puc_config_exar_pcie 695 }, 696 697 { 0x13a8, 0x0354, 0xffff, 0, 698 "Exar XR17V354", 699 125000000, 700 PUC_PORT_4S, 0x10, 0, -1, 701 .config_function = puc_config_exar_pcie 702 }, 703 704 /* The XR17V358 uses the 125MHz PCIe clock as its reference clock. */ 705 { 0x13a8, 0x0358, 0xffff, 0, 706 "Exar XR17V358", 707 125000000, 708 PUC_PORT_8S, 0x10, 0, -1, 709 .config_function = puc_config_exar_pcie 710 }, 711 712 /* 713 * The Advantech PCI-1602 Rev. A use the first two ports of an Oxford 714 * Semiconductor OXuPCI954. Note these boards have a hardware bug in 715 * that they drive the RS-422/485 transmitters after power-on until a 716 * driver initializes the UARTs. 717 */ 718 { 0x13fe, 0x1600, 0x1602, 0x0002, 719 "Advantech PCI-1602 Rev. A", 720 DEFAULT_RCLK * 8, 721 PUC_PORT_2S, 0x10, 0, 8, 722 .config_function = puc_config_advantech 723 }, 724 725 /* Advantech PCI-1602 Rev. B1/PCI-1603 are also based on OXuPCI952. */ 726 { 0x13fe, 0xa102, 0x13fe, 0xa102, 727 "Advantech 2-port PCI (PCI-1602 Rev. B1/PCI-1603)", 728 DEFAULT_RCLK * 8, 729 PUC_PORT_2S, 0x10, 4, 0, 730 .config_function = puc_config_advantech 731 }, 732 733 { 0x1407, 0x0100, 0xffff, 0, 734 "Lava Computers Dual Serial", 735 DEFAULT_RCLK, 736 PUC_PORT_2S, 0x10, 4, 0, 737 }, 738 739 { 0x1407, 0x0101, 0xffff, 0, 740 "Lava Computers Quatro A", 741 DEFAULT_RCLK, 742 PUC_PORT_2S, 0x10, 4, 0, 743 }, 744 745 { 0x1407, 0x0102, 0xffff, 0, 746 "Lava Computers Quatro B", 747 DEFAULT_RCLK, 748 PUC_PORT_2S, 0x10, 4, 0, 749 }, 750 751 { 0x1407, 0x0120, 0xffff, 0, 752 "Lava Computers Quattro-PCI A", 753 DEFAULT_RCLK, 754 PUC_PORT_2S, 0x10, 4, 0, 755 }, 756 757 { 0x1407, 0x0121, 0xffff, 0, 758 "Lava Computers Quattro-PCI B", 759 DEFAULT_RCLK, 760 PUC_PORT_2S, 0x10, 4, 0, 761 }, 762 763 { 0x1407, 0x0180, 0xffff, 0, 764 "Lava Computers Octo A", 765 DEFAULT_RCLK, 766 PUC_PORT_4S, 0x10, 4, 0, 767 }, 768 769 { 0x1407, 0x0181, 0xffff, 0, 770 "Lava Computers Octo B", 771 DEFAULT_RCLK, 772 PUC_PORT_4S, 0x10, 4, 0, 773 }, 774 775 { 0x1409, 0x7268, 0xffff, 0, 776 "Sunix SUN1888", 777 0, 778 PUC_PORT_2P, 0x10, 0, 8, 779 }, 780 781 { 0x1409, 0x7168, 0xffff, 0, 782 NULL, 783 DEFAULT_RCLK * 8, 784 PUC_PORT_NONSTANDARD, 0x10, -1, -1, 785 .config_function = puc_config_timedia 786 }, 787 788 /* 789 * Boards with an Oxford Semiconductor chip. 790 * 791 * Oxford Semiconductor provides documentation for their chip at: 792 * <URL:http://www.plxtech.com/products/uart/> 793 * 794 * As sold by Kouwell <URL:http://www.kouwell.com/>. 795 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. 796 */ 797 { 798 0x1415, 0x9501, 0x10fc, 0xc070, 799 "I-O DATA RSA-PCI2/R", 800 DEFAULT_RCLK * 8, 801 PUC_PORT_2S, 0x10, 0, 8, 802 }, 803 804 { 0x1415, 0x9501, 0x131f, 0x2050, 805 "SIIG Cyber 4 PCI 16550", 806 DEFAULT_RCLK * 10, 807 PUC_PORT_4S, 0x10, 0, 8, 808 }, 809 810 { 0x1415, 0x9501, 0x131f, 0x2051, 811 "SIIG Cyber 4S PCI 16C650 (20x family)", 812 DEFAULT_RCLK * 10, 813 PUC_PORT_4S, 0x10, 0, 8, 814 }, 815 816 { 0x1415, 0x9501, 0x131f, 0x2052, 817 "SIIG Quartet Serial 850", 818 DEFAULT_RCLK * 10, 819 PUC_PORT_4S, 0x10, 0, 8, 820 }, 821 822 { 0x1415, 0x9501, 0x14db, 0x2150, 823 "Kuroutoshikou SERIAL4P-LPPCI2", 824 DEFAULT_RCLK * 10, 825 PUC_PORT_4S, 0x10, 0, 8, 826 }, 827 828 { 0x1415, 0x9501, 0xffff, 0, 829 "Oxford Semiconductor OX16PCI954 UARTs", 830 0, 831 PUC_PORT_4S, 0x10, 0, 8, 832 .config_function = puc_config_oxford_pci954 833 }, 834 835 { 0x1415, 0x950a, 0x131f, 0x2030, 836 "SIIG Cyber 2S PCIe", 837 DEFAULT_RCLK * 10, 838 PUC_PORT_2S, 0x10, 0, 8, 839 }, 840 841 { 0x1415, 0x950a, 0x131f, 0x2032, 842 "SIIG Cyber Serial Dual PCI 16C850", 843 DEFAULT_RCLK * 10, 844 PUC_PORT_4S, 0x10, 0, 8, 845 }, 846 847 { 0x1415, 0x950a, 0x131f, 0x2061, 848 "SIIG Cyber 2SP1 PCIe", 849 DEFAULT_RCLK * 10, 850 PUC_PORT_2S, 0x10, 0, 8, 851 }, 852 853 { 0x1415, 0x950a, 0xffff, 0, 854 "Oxford Semiconductor OX16PCI954 UARTs", 855 DEFAULT_RCLK, 856 PUC_PORT_4S, 0x10, 0, 8, 857 }, 858 859 { 0x1415, 0x9511, 0xffff, 0, 860 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)", 861 DEFAULT_RCLK, 862 PUC_PORT_4S, 0x10, 0, 8, 863 }, 864 865 { 0x1415, 0x9521, 0xffff, 0, 866 "Oxford Semiconductor OX16PCI952 UARTs", 867 DEFAULT_RCLK, 868 PUC_PORT_2S, 0x10, 4, 0, 869 }, 870 871 { 0x1415, 0x9538, 0xffff, 0, 872 "Oxford Semiconductor OX16PCI958 UARTs", 873 DEFAULT_RCLK, 874 PUC_PORT_8S, 0x18, 0, 8, 875 }, 876 877 /* 878 * Perle boards use Oxford Semiconductor chips, but they store the 879 * Oxford Semiconductor device ID as a subvendor device ID and use 880 * their own device IDs. 881 */ 882 883 { 0x155f, 0x0331, 0xffff, 0, 884 "Perle Ultraport4 Express", 885 DEFAULT_RCLK * 8, 886 PUC_PORT_4S, 0x10, 0, 8, 887 }, 888 889 { 0x155f, 0xB012, 0xffff, 0, 890 "Perle Speed2 LE", 891 DEFAULT_RCLK * 8, 892 PUC_PORT_2S, 0x10, 0, 8, 893 }, 894 895 { 0x155f, 0xB022, 0xffff, 0, 896 "Perle Speed2 LE", 897 DEFAULT_RCLK * 8, 898 PUC_PORT_2S, 0x10, 0, 8, 899 }, 900 901 { 0x155f, 0xB004, 0xffff, 0, 902 "Perle Speed4 LE", 903 DEFAULT_RCLK * 8, 904 PUC_PORT_4S, 0x10, 0, 8, 905 }, 906 907 { 0x155f, 0xB008, 0xffff, 0, 908 "Perle Speed8 LE", 909 DEFAULT_RCLK * 8, 910 PUC_PORT_8S, 0x10, 0, 8, 911 }, 912 913 /* 914 * Oxford Semiconductor PCI Express Expresso family 915 * 916 * Found in many 'native' PCI Express serial boards such as: 917 * 918 * eMegatech MP954ER4 (4 port) and MP958ER8 (8 port) 919 * <URL:http://www.emegatech.com.tw/pdrs232pcie.html> 920 * 921 * Lindy 51189 (4 port) 922 * <URL:http://www.lindy.com> <URL:http://tinyurl.com/lindy-51189> 923 * 924 * StarTech.com PEX4S952 (4 port) and PEX8S952 (8 port) 925 * <URL:http://www.startech.com> 926 */ 927 928 { 0x1415, 0xc11b, 0xffff, 0, 929 "Oxford Semiconductor OXPCIe952 1S1P", 930 DEFAULT_RCLK * 0x22, 931 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 932 .config_function = puc_config_oxford_pcie 933 }, 934 935 { 0x1415, 0xc138, 0xffff, 0, 936 "Oxford Semiconductor OXPCIe952 UARTs", 937 DEFAULT_RCLK * 0x22, 938 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 939 .config_function = puc_config_oxford_pcie 940 }, 941 942 { 0x1415, 0xc158, 0xffff, 0, 943 "Oxford Semiconductor OXPCIe952 UARTs", 944 DEFAULT_RCLK * 0x22, 945 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 946 .config_function = puc_config_oxford_pcie 947 }, 948 949 { 0x1415, 0xc15d, 0xffff, 0, 950 "Oxford Semiconductor OXPCIe952 UARTs (function 1)", 951 DEFAULT_RCLK * 0x22, 952 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 953 .config_function = puc_config_oxford_pcie 954 }, 955 956 { 0x1415, 0xc208, 0xffff, 0, 957 "Oxford Semiconductor OXPCIe954 UARTs", 958 DEFAULT_RCLK * 0x22, 959 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 960 .config_function = puc_config_oxford_pcie 961 }, 962 963 { 0x1415, 0xc20d, 0xffff, 0, 964 "Oxford Semiconductor OXPCIe954 UARTs (function 1)", 965 DEFAULT_RCLK * 0x22, 966 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 967 .config_function = puc_config_oxford_pcie 968 }, 969 970 { 0x1415, 0xc308, 0xffff, 0, 971 "Oxford Semiconductor OXPCIe958 UARTs", 972 DEFAULT_RCLK * 0x22, 973 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 974 .config_function = puc_config_oxford_pcie 975 }, 976 977 { 0x1415, 0xc30d, 0xffff, 0, 978 "Oxford Semiconductor OXPCIe958 UARTs (function 1)", 979 DEFAULT_RCLK * 0x22, 980 PUC_PORT_NONSTANDARD, 0x10, 0, -1, 981 .config_function = puc_config_oxford_pcie 982 }, 983 984 { 0x14d2, 0x8010, 0xffff, 0, 985 "VScom PCI-100L", 986 DEFAULT_RCLK * 8, 987 PUC_PORT_1S, 0x14, 0, 0, 988 }, 989 990 { 0x14d2, 0x8020, 0xffff, 0, 991 "VScom PCI-200L", 992 DEFAULT_RCLK * 8, 993 PUC_PORT_2S, 0x14, 4, 0, 994 }, 995 996 { 0x14d2, 0x8028, 0xffff, 0, 997 "VScom 200Li", 998 DEFAULT_RCLK, 999 PUC_PORT_2S, 0x20, 0, 8, 1000 }, 1001 1002 /* 1003 * VScom (Titan?) PCI-800L. More modern variant of the 1004 * PCI-800. Uses 6 discrete 16550 UARTs, plus another 1005 * two of them obviously implemented as macro cells in 1006 * the ASIC. This causes the weird port access pattern 1007 * below, where two of the IO port ranges each access 1008 * one of the ASIC UARTs, and a block of IO addresses 1009 * access the external UARTs. 1010 */ 1011 { 0x14d2, 0x8080, 0xffff, 0, 1012 "Titan VScom PCI-800L", 1013 DEFAULT_RCLK * 8, 1014 PUC_PORT_8S, 0x14, -1, -1, 1015 .config_function = puc_config_titan 1016 }, 1017 1018 /* 1019 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers 1020 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has 1021 * device ID 3 and PCI device 1 device ID 4. 1022 */ 1023 { 0x14d2, 0xa003, 0xffff, 0, 1024 "Titan PCI-800H", 1025 DEFAULT_RCLK * 8, 1026 PUC_PORT_4S, 0x10, 0, 8, 1027 }, 1028 1029 { 0x14d2, 0xa004, 0xffff, 0, 1030 "Titan PCI-800H", 1031 DEFAULT_RCLK * 8, 1032 PUC_PORT_4S, 0x10, 0, 8, 1033 }, 1034 1035 { 0x14d2, 0xa005, 0xffff, 0, 1036 "Titan PCI-200H", 1037 DEFAULT_RCLK * 8, 1038 PUC_PORT_2S, 0x10, 0, 8, 1039 }, 1040 1041 { 0x14d2, 0xe020, 0xffff, 0, 1042 "Titan VScom PCI-200HV2", 1043 DEFAULT_RCLK * 8, 1044 PUC_PORT_2S, 0x10, 4, 0, 1045 }, 1046 1047 { 0x14d2, 0xa007, 0xffff, 0, 1048 "Titan VScom PCIex-800H", 1049 DEFAULT_RCLK * 8, 1050 PUC_PORT_4S, 0x10, 0, 8, 1051 }, 1052 1053 { 0x14d2, 0xa008, 0xffff, 0, 1054 "Titan VScom PCIex-800H", 1055 DEFAULT_RCLK * 8, 1056 PUC_PORT_4S, 0x10, 0, 8, 1057 }, 1058 1059 { 0x14db, 0x2130, 0xffff, 0, 1060 "Avlab Technology, PCI IO 2S", 1061 DEFAULT_RCLK, 1062 PUC_PORT_2S, 0x10, 4, 0, 1063 }, 1064 1065 { 0x14db, 0x2150, 0xffff, 0, 1066 "Avlab Low Profile PCI 4 Serial", 1067 DEFAULT_RCLK, 1068 PUC_PORT_4S, 0x10, 4, 0, 1069 }, 1070 1071 { 0x14db, 0x2152, 0xffff, 0, 1072 "Avlab Low Profile PCI 4 Serial", 1073 DEFAULT_RCLK, 1074 PUC_PORT_4S, 0x10, 4, 0, 1075 }, 1076 1077 { 0x1592, 0x0781, 0xffff, 0, 1078 "Syba Tech Ltd. PCI-4S2P-550-ECP", 1079 DEFAULT_RCLK, 1080 PUC_PORT_4S1P, 0x10, 0, -1, 1081 .config_function = puc_config_syba 1082 }, 1083 1084 { 0x1fd4, 0x1999, 0x1fd4, 0x0002, 1085 "Sunix SER5xxxx 2-port serial", 1086 DEFAULT_RCLK * 8, 1087 PUC_PORT_2S, 0x10, 0, 8, 1088 }, 1089 1090 { 0x1fd4, 0x1999, 0x1fd4, 0x0004, 1091 "Sunix SER5xxxx 4-port serial", 1092 DEFAULT_RCLK * 8, 1093 PUC_PORT_4S, 0x10, 0, 8, 1094 }, 1095 1096 { 0x1fd4, 0x1999, 0x1fd4, 0x0008, 1097 "Sunix SER5xxxx 8-port serial", 1098 DEFAULT_RCLK * 8, 1099 PUC_PORT_8S, -1, -1, -1, 1100 .config_function = puc_config_sunix 1101 }, 1102 1103 { 0x1fd4, 0x1999, 0x1fd4, 0x0101, 1104 "Sunix MIO5xxxx 1-port serial and 1284 Printer port", 1105 DEFAULT_RCLK * 8, 1106 PUC_PORT_1S1P, -1, -1, -1, 1107 .config_function = puc_config_sunix 1108 }, 1109 1110 { 0x1fd4, 0x1999, 0x1fd4, 0x0102, 1111 "Sunix MIO5xxxx 2-port serial and 1284 Printer port", 1112 DEFAULT_RCLK * 8, 1113 PUC_PORT_2S1P, -1, -1, -1, 1114 .config_function = puc_config_sunix 1115 }, 1116 1117 { 0x1fd4, 0x1999, 0x1fd4, 0x0104, 1118 "Sunix MIO5xxxx 4-port serial and 1284 Printer port", 1119 DEFAULT_RCLK * 8, 1120 PUC_PORT_4S1P, -1, -1, -1, 1121 .config_function = puc_config_sunix 1122 }, 1123 1124 { 0x5372, 0x6872, 0xffff, 0, 1125 "Feasso PCI FPP-02 2S1P", 1126 DEFAULT_RCLK, 1127 PUC_PORT_2S1P, 0x10, 4, 0, 1128 }, 1129 1130 { 0x5372, 0x6873, 0xffff, 0, 1131 "Sun 1040 PCI Quad Serial", 1132 DEFAULT_RCLK, 1133 PUC_PORT_4S, 0x10, 4, 0, 1134 }, 1135 1136 { 0x6666, 0x0001, 0xffff, 0, 1137 "Decision Computer Inc, PCCOM 4-port serial", 1138 DEFAULT_RCLK, 1139 PUC_PORT_4S, 0x1c, 0, 8, 1140 }, 1141 1142 { 0x6666, 0x0002, 0xffff, 0, 1143 "Decision Computer Inc, PCCOM 8-port serial", 1144 DEFAULT_RCLK, 1145 PUC_PORT_8S, 0x1c, 0, 8, 1146 }, 1147 1148 { 0x6666, 0x0004, 0xffff, 0, 1149 "PCCOM dual port RS232/422/485", 1150 DEFAULT_RCLK, 1151 PUC_PORT_2S, 0x1c, 0, 8, 1152 }, 1153 1154 { 0x9710, 0x9815, 0xffff, 0, 1155 "NetMos NM9815 Dual 1284 Printer port", 1156 0, 1157 PUC_PORT_2P, 0x10, 8, 0, 1158 }, 1159 1160 /* 1161 * This is more specific than the generic NM9835 entry, and is placed 1162 * here to _prevent_ puc(4) from claiming this single port card. 1163 * 1164 * uart(4) will claim this device. 1165 */ 1166 { 0x9710, 0x9835, 0x1000, 1, 1167 "NetMos NM9835 based 1-port serial", 1168 DEFAULT_RCLK, 1169 PUC_PORT_1S, 0x10, 4, 0, 1170 }, 1171 1172 { 0x9710, 0x9835, 0x1000, 2, 1173 "NetMos NM9835 based 2-port serial", 1174 DEFAULT_RCLK, 1175 PUC_PORT_2S, 0x10, 4, 0, 1176 }, 1177 1178 { 0x9710, 0x9835, 0xffff, 0, 1179 "NetMos NM9835 Dual UART and 1284 Printer port", 1180 DEFAULT_RCLK, 1181 PUC_PORT_2S1P, 0x10, 4, 0, 1182 }, 1183 1184 { 0x9710, 0x9845, 0x1000, 0x0006, 1185 "NetMos NM9845 6 Port UART", 1186 DEFAULT_RCLK, 1187 PUC_PORT_6S, 0x10, 4, 0, 1188 }, 1189 1190 { 0x9710, 0x9845, 0xffff, 0, 1191 "NetMos NM9845 Quad UART and 1284 Printer port", 1192 DEFAULT_RCLK, 1193 PUC_PORT_4S1P, 0x10, 4, 0, 1194 }, 1195 1196 { 0x9710, 0x9865, 0xa000, 0x3002, 1197 "NetMos NM9865 Dual UART", 1198 DEFAULT_RCLK, 1199 PUC_PORT_2S, 0x10, 4, 0, 1200 }, 1201 1202 { 0x9710, 0x9865, 0xa000, 0x3003, 1203 "NetMos NM9865 Triple UART", 1204 DEFAULT_RCLK, 1205 PUC_PORT_3S, 0x10, 4, 0, 1206 }, 1207 1208 { 0x9710, 0x9865, 0xa000, 0x3004, 1209 "NetMos NM9865 Quad UART", 1210 DEFAULT_RCLK, 1211 PUC_PORT_4S, 0x10, 4, 0, 1212 }, 1213 1214 { 0x9710, 0x9865, 0xa000, 0x3011, 1215 "NetMos NM9865 Single UART and 1284 Printer port", 1216 DEFAULT_RCLK, 1217 PUC_PORT_1S1P, 0x10, 4, 0, 1218 }, 1219 1220 { 0x9710, 0x9865, 0xa000, 0x3012, 1221 "NetMos NM9865 Dual UART and 1284 Printer port", 1222 DEFAULT_RCLK, 1223 PUC_PORT_2S1P, 0x10, 4, 0, 1224 }, 1225 1226 { 0x9710, 0x9865, 0xa000, 0x3020, 1227 "NetMos NM9865 Dual 1284 Printer port", 1228 DEFAULT_RCLK, 1229 PUC_PORT_2P, 0x10, 4, 0, 1230 }, 1231 1232 { 0xb00c, 0x021c, 0xffff, 0, 1233 "IC Book Labs Gunboat x4 Lite", 1234 DEFAULT_RCLK, 1235 PUC_PORT_4S, 0x10, 0, 8, 1236 .config_function = puc_config_icbook 1237 }, 1238 1239 { 0xb00c, 0x031c, 0xffff, 0, 1240 "IC Book Labs Gunboat x4 Pro", 1241 DEFAULT_RCLK, 1242 PUC_PORT_4S, 0x10, 0, 8, 1243 .config_function = puc_config_icbook 1244 }, 1245 1246 { 0xb00c, 0x041c, 0xffff, 0, 1247 "IC Book Labs Ironclad x8 Lite", 1248 DEFAULT_RCLK, 1249 PUC_PORT_8S, 0x10, 0, 8, 1250 .config_function = puc_config_icbook 1251 }, 1252 1253 { 0xb00c, 0x051c, 0xffff, 0, 1254 "IC Book Labs Ironclad x8 Pro", 1255 DEFAULT_RCLK, 1256 PUC_PORT_8S, 0x10, 0, 8, 1257 .config_function = puc_config_icbook 1258 }, 1259 1260 { 0xb00c, 0x081c, 0xffff, 0, 1261 "IC Book Labs Dreadnought x16 Pro", 1262 DEFAULT_RCLK * 8, 1263 PUC_PORT_16S, 0x10, 0, 8, 1264 .config_function = puc_config_icbook 1265 }, 1266 1267 { 0xb00c, 0x091c, 0xffff, 0, 1268 "IC Book Labs Dreadnought x16 Lite", 1269 DEFAULT_RCLK, 1270 PUC_PORT_16S, 0x10, 0, 8, 1271 .config_function = puc_config_icbook 1272 }, 1273 1274 { 0xb00c, 0x0a1c, 0xffff, 0, 1275 "IC Book Labs Gunboat x2 Low Profile", 1276 DEFAULT_RCLK, 1277 PUC_PORT_2S, 0x10, 0, 8, 1278 }, 1279 1280 { 0xb00c, 0x0b1c, 0xffff, 0, 1281 "IC Book Labs Gunboat x4 Low Profile", 1282 DEFAULT_RCLK, 1283 PUC_PORT_4S, 0x10, 0, 8, 1284 .config_function = puc_config_icbook 1285 }, 1286 { 0xffff, 0, 0xffff, 0, NULL, 0 } 1287 }; 1288 1289 static int 1290 puc_config_advantech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1291 intptr_t *res __unused) 1292 { 1293 const struct puc_cfg *cfg; 1294 struct resource *cres; 1295 struct puc_bar *bar; 1296 device_t cdev, dev; 1297 bus_size_t off; 1298 int base, crtype, fixed, high, i, oxpcie; 1299 uint8_t acr, func, mask; 1300 1301 if (cmd != PUC_CFG_SETUP) 1302 return (ENXIO); 1303 1304 base = fixed = oxpcie = 0; 1305 crtype = SYS_RES_IOPORT; 1306 acr = mask = 0x0; 1307 func = high = 1; 1308 off = 0x60; 1309 1310 cfg = sc->sc_cfg; 1311 switch (cfg->subvendor) { 1312 case 0x13fe: 1313 switch (cfg->device) { 1314 case 0xa102: 1315 high = 0; 1316 break; 1317 default: 1318 break; 1319 } 1320 default: 1321 break; 1322 } 1323 if (fixed == 1) 1324 goto setup; 1325 1326 dev = sc->sc_dev; 1327 cdev = pci_find_dbsf(pci_get_domain(dev), pci_get_bus(dev), 1328 pci_get_slot(dev), func); 1329 if (cdev == NULL) { 1330 device_printf(dev, "could not find config function\n"); 1331 return (ENXIO); 1332 } 1333 1334 i = PCIR_BAR(0); 1335 cres = bus_alloc_resource_any(cdev, crtype, &i, RF_ACTIVE); 1336 if (cres == NULL) { 1337 device_printf(dev, "could not allocate config resource\n"); 1338 return (ENXIO); 1339 } 1340 1341 if (oxpcie == 0) { 1342 mask = bus_read_1(cres, off); 1343 if (pci_get_function(dev) == 1) 1344 base = 4; 1345 } 1346 1347 setup: 1348 for (i = 0; i < sc->sc_nports; ++i) { 1349 device_printf(dev, "port %d: ", i); 1350 bar = puc_get_bar(sc, cfg->rid + i * cfg->d_rid); 1351 if (bar == NULL) { 1352 printf("could not get BAR\n"); 1353 continue; 1354 } 1355 1356 if (fixed == 0) { 1357 if ((mask & (1 << (base + i))) == 0) { 1358 acr = 0; 1359 printf("RS-232\n"); 1360 } else { 1361 acr = (high == 1 ? 0x18 : 0x10); 1362 printf("RS-422/RS-485, active-%s auto-DTR\n", 1363 high == 1 ? "high" : "low"); 1364 } 1365 } 1366 1367 bus_write_1(bar->b_res, REG_SPR, REG_ACR); 1368 bus_write_1(bar->b_res, REG_ICR, acr); 1369 } 1370 1371 bus_release_resource(cdev, crtype, rman_get_rid(cres), cres); 1372 return (0); 1373 } 1374 1375 static int 1376 puc_config_amc(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, int port, 1377 intptr_t *res) 1378 { 1379 1380 switch (cmd) { 1381 case PUC_CFG_GET_OFS: 1382 *res = 8 * (port & 1); 1383 return (0); 1384 case PUC_CFG_GET_RID: 1385 *res = 0x14 + (port >> 1) * 4; 1386 return (0); 1387 default: 1388 break; 1389 } 1390 return (ENXIO); 1391 } 1392 1393 static int 1394 puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1395 intptr_t *res) 1396 { 1397 const struct puc_cfg *cfg = sc->sc_cfg; 1398 1399 if (cmd == PUC_CFG_GET_OFS) { 1400 if (cfg->subdevice == 0x1282) /* Everest SP */ 1401 port <<= 1; 1402 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */ 1403 port = (port == 3) ? 4 : port; 1404 *res = port * 8 + ((port > 2) ? 0x18 : 0); 1405 return (0); 1406 } 1407 return (ENXIO); 1408 } 1409 1410 static int 1411 puc_config_exar(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1412 int port, intptr_t *res) 1413 { 1414 1415 if (cmd == PUC_CFG_GET_OFS) { 1416 *res = port * 0x200; 1417 return (0); 1418 } 1419 return (ENXIO); 1420 } 1421 1422 static int 1423 puc_config_exar_pcie(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1424 int port, intptr_t *res) 1425 { 1426 1427 if (cmd == PUC_CFG_GET_OFS) { 1428 *res = port * 0x400; 1429 return (0); 1430 } 1431 return (ENXIO); 1432 } 1433 1434 static int 1435 puc_config_icbook(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1436 int port __unused, intptr_t *res) 1437 { 1438 1439 if (cmd == PUC_CFG_GET_ILR) { 1440 *res = PUC_ILR_DIGI; 1441 return (0); 1442 } 1443 return (ENXIO); 1444 } 1445 1446 static int 1447 puc_config_moxa(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1448 intptr_t *res) 1449 { 1450 const struct puc_cfg *cfg = sc->sc_cfg; 1451 1452 if (cmd == PUC_CFG_GET_OFS) { 1453 if (port == 3 && (cfg->device == 0x1045 || 1454 cfg->device == 0x1144)) 1455 port = 7; 1456 *res = port * 0x200; 1457 1458 return 0; 1459 } 1460 return (ENXIO); 1461 } 1462 1463 static int 1464 puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, 1465 int port __unused, intptr_t *res) 1466 { 1467 const struct puc_cfg *cfg = sc->sc_cfg; 1468 struct puc_bar *bar; 1469 uint8_t v0, v1; 1470 1471 switch (cmd) { 1472 case PUC_CFG_SETUP: 1473 /* 1474 * Check if the scratchpad register is enabled or if the 1475 * interrupt status and options registers are active. 1476 */ 1477 bar = puc_get_bar(sc, cfg->rid); 1478 if (bar == NULL) 1479 return (ENXIO); 1480 bus_write_1(bar->b_res, REG_LCR, LCR_DLAB); 1481 bus_write_1(bar->b_res, REG_SPR, 0); 1482 v0 = bus_read_1(bar->b_res, REG_SPR); 1483 bus_write_1(bar->b_res, REG_SPR, 0x80 + -cfg->clock); 1484 v1 = bus_read_1(bar->b_res, REG_SPR); 1485 bus_write_1(bar->b_res, REG_LCR, 0); 1486 sc->sc_cfg_data = (v0 << 8) | v1; 1487 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1488 /* 1489 * The SPR register echoed the two values written 1490 * by us. This means that the SPAD jumper is set. 1491 */ 1492 device_printf(sc->sc_dev, "warning: extra features " 1493 "not usable -- SPAD compatibility enabled\n"); 1494 return (0); 1495 } 1496 if (v0 != 0) { 1497 /* 1498 * The first value doesn't match. This can only mean 1499 * that the SPAD jumper is not set and that a non- 1500 * standard fixed clock multiplier jumper is set. 1501 */ 1502 if (bootverbose) 1503 device_printf(sc->sc_dev, "fixed clock rate " 1504 "multiplier of %d\n", 1 << v0); 1505 if (v0 < -cfg->clock) 1506 device_printf(sc->sc_dev, "warning: " 1507 "suboptimal fixed clock rate multiplier " 1508 "setting\n"); 1509 return (0); 1510 } 1511 /* 1512 * The first value matched, but the second didn't. We know 1513 * that the SPAD jumper is not set. We also know that the 1514 * clock rate multiplier is software controlled *and* that 1515 * we just programmed it to the maximum allowed. 1516 */ 1517 if (bootverbose) 1518 device_printf(sc->sc_dev, "clock rate multiplier of " 1519 "%d selected\n", 1 << -cfg->clock); 1520 return (0); 1521 case PUC_CFG_GET_CLOCK: 1522 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1523 v1 = sc->sc_cfg_data & 0xff; 1524 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1525 /* 1526 * XXX With the SPAD jumper applied, there's no 1527 * easy way of knowing if there's also a clock 1528 * rate multiplier jumper installed. Let's hope 1529 * not ... 1530 */ 1531 *res = DEFAULT_RCLK; 1532 } else if (v0 == 0) { 1533 /* 1534 * No clock rate multiplier jumper installed, 1535 * so we programmed the board with the maximum 1536 * multiplier allowed as given to us in the 1537 * clock field of the config record (negated). 1538 */ 1539 *res = DEFAULT_RCLK << -cfg->clock; 1540 } else 1541 *res = DEFAULT_RCLK << v0; 1542 return (0); 1543 case PUC_CFG_GET_ILR: 1544 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1545 v1 = sc->sc_cfg_data & 0xff; 1546 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock) ? 1547 PUC_ILR_NONE : PUC_ILR_QUATECH; 1548 return (0); 1549 default: 1550 break; 1551 } 1552 return (ENXIO); 1553 } 1554 1555 static int 1556 puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1557 intptr_t *res) 1558 { 1559 static int base[] = { 0x251, 0x3f0, 0 }; 1560 const struct puc_cfg *cfg = sc->sc_cfg; 1561 struct puc_bar *bar; 1562 int efir, idx, ofs; 1563 uint8_t v; 1564 1565 switch (cmd) { 1566 case PUC_CFG_SETUP: 1567 bar = puc_get_bar(sc, cfg->rid); 1568 if (bar == NULL) 1569 return (ENXIO); 1570 1571 /* configure both W83877TFs */ 1572 bus_write_1(bar->b_res, 0x250, 0x89); 1573 bus_write_1(bar->b_res, 0x3f0, 0x87); 1574 bus_write_1(bar->b_res, 0x3f0, 0x87); 1575 idx = 0; 1576 while (base[idx] != 0) { 1577 efir = base[idx]; 1578 bus_write_1(bar->b_res, efir, 0x09); 1579 v = bus_read_1(bar->b_res, efir + 1); 1580 if ((v & 0x0f) != 0x0c) 1581 return (ENXIO); 1582 bus_write_1(bar->b_res, efir, 0x16); 1583 v = bus_read_1(bar->b_res, efir + 1); 1584 bus_write_1(bar->b_res, efir, 0x16); 1585 bus_write_1(bar->b_res, efir + 1, v | 0x04); 1586 bus_write_1(bar->b_res, efir, 0x16); 1587 bus_write_1(bar->b_res, efir + 1, v & ~0x04); 1588 ofs = base[idx] & 0x300; 1589 bus_write_1(bar->b_res, efir, 0x23); 1590 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2); 1591 bus_write_1(bar->b_res, efir, 0x24); 1592 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2); 1593 bus_write_1(bar->b_res, efir, 0x25); 1594 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2); 1595 bus_write_1(bar->b_res, efir, 0x17); 1596 bus_write_1(bar->b_res, efir + 1, 0x03); 1597 bus_write_1(bar->b_res, efir, 0x28); 1598 bus_write_1(bar->b_res, efir + 1, 0x43); 1599 idx++; 1600 } 1601 bus_write_1(bar->b_res, 0x250, 0xaa); 1602 bus_write_1(bar->b_res, 0x3f0, 0xaa); 1603 return (0); 1604 case PUC_CFG_GET_OFS: 1605 switch (port) { 1606 case 0: 1607 *res = 0x2f8; 1608 return (0); 1609 case 1: 1610 *res = 0x2e8; 1611 return (0); 1612 case 2: 1613 *res = 0x3f8; 1614 return (0); 1615 case 3: 1616 *res = 0x3e8; 1617 return (0); 1618 case 4: 1619 *res = 0x278; 1620 return (0); 1621 } 1622 break; 1623 default: 1624 break; 1625 } 1626 return (ENXIO); 1627 } 1628 1629 static int 1630 puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1631 intptr_t *res) 1632 { 1633 const struct puc_cfg *cfg = sc->sc_cfg; 1634 1635 switch (cmd) { 1636 case PUC_CFG_GET_OFS: 1637 if (cfg->ports == PUC_PORT_8S) { 1638 *res = (port > 4) ? 8 * (port - 4) : 0; 1639 return (0); 1640 } 1641 break; 1642 case PUC_CFG_GET_RID: 1643 if (cfg->ports == PUC_PORT_8S) { 1644 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port); 1645 return (0); 1646 } 1647 if (cfg->ports == PUC_PORT_2S1P) { 1648 switch (port) { 1649 case 0: *res = 0x10; return (0); 1650 case 1: *res = 0x14; return (0); 1651 case 2: *res = 0x1c; return (0); 1652 } 1653 } 1654 break; 1655 default: 1656 break; 1657 } 1658 return (ENXIO); 1659 } 1660 1661 static int 1662 puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1663 intptr_t *res) 1664 { 1665 static const uint16_t dual[] = { 1666 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 1667 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 1668 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 1669 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 1670 0xD079, 0 1671 }; 1672 static const uint16_t quad[] = { 1673 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 1674 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 1675 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 1676 0xB157, 0 1677 }; 1678 static const uint16_t octa[] = { 1679 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 1680 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 1681 }; 1682 static const struct { 1683 int ports; 1684 const uint16_t *ids; 1685 } subdevs[] = { 1686 { 2, dual }, 1687 { 4, quad }, 1688 { 8, octa }, 1689 { 0, NULL } 1690 }; 1691 static char desc[64]; 1692 int dev, id; 1693 uint16_t subdev; 1694 1695 switch (cmd) { 1696 case PUC_CFG_GET_CLOCK: 1697 if (port < 2) 1698 *res = DEFAULT_RCLK * 8; 1699 else 1700 *res = DEFAULT_RCLK; 1701 return (0); 1702 case PUC_CFG_GET_DESC: 1703 snprintf(desc, sizeof(desc), 1704 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data); 1705 *res = (intptr_t)desc; 1706 return (0); 1707 case PUC_CFG_GET_NPORTS: 1708 subdev = pci_get_subdevice(sc->sc_dev); 1709 dev = 0; 1710 while (subdevs[dev].ports != 0) { 1711 id = 0; 1712 while (subdevs[dev].ids[id] != 0) { 1713 if (subdev == subdevs[dev].ids[id]) { 1714 sc->sc_cfg_data = subdevs[dev].ports; 1715 *res = sc->sc_cfg_data; 1716 return (0); 1717 } 1718 id++; 1719 } 1720 dev++; 1721 } 1722 return (ENXIO); 1723 case PUC_CFG_GET_OFS: 1724 *res = (port == 1 || port == 3) ? 8 : 0; 1725 return (0); 1726 case PUC_CFG_GET_RID: 1727 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4; 1728 return (0); 1729 case PUC_CFG_GET_TYPE: 1730 *res = PUC_TYPE_SERIAL; 1731 return (0); 1732 default: 1733 break; 1734 } 1735 return (ENXIO); 1736 } 1737 1738 static int 1739 puc_config_oxford_pci954(struct puc_softc *sc, enum puc_cfg_cmd cmd, 1740 int port __unused, intptr_t *res) 1741 { 1742 1743 switch (cmd) { 1744 case PUC_CFG_GET_CLOCK: 1745 /* 1746 * OXu16PCI954 use a 14.7456 MHz clock by default while 1747 * OX16PCI954 and OXm16PCI954 employ a 1.8432 MHz one. 1748 */ 1749 if (pci_get_revid(sc->sc_dev) == 1) 1750 *res = DEFAULT_RCLK * 8; 1751 else 1752 *res = DEFAULT_RCLK; 1753 return (0); 1754 default: 1755 break; 1756 } 1757 return (ENXIO); 1758 } 1759 1760 static int 1761 puc_config_oxford_pcie(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1762 intptr_t *res) 1763 { 1764 const struct puc_cfg *cfg = sc->sc_cfg; 1765 int idx; 1766 struct puc_bar *bar; 1767 uint8_t value; 1768 1769 switch (cmd) { 1770 case PUC_CFG_SETUP: 1771 device_printf(sc->sc_dev, "%d UARTs detected\n", 1772 sc->sc_nports); 1773 1774 /* Set UARTs to enhanced mode */ 1775 bar = puc_get_bar(sc, cfg->rid); 1776 if (bar == NULL) 1777 return (ENXIO); 1778 for (idx = 0; idx < sc->sc_nports; idx++) { 1779 value = bus_read_1(bar->b_res, 0x1000 + (idx << 9) + 1780 0x92); 1781 bus_write_1(bar->b_res, 0x1000 + (idx << 9) + 0x92, 1782 value | 0x10); 1783 } 1784 return (0); 1785 case PUC_CFG_GET_LEN: 1786 *res = 0x200; 1787 return (0); 1788 case PUC_CFG_GET_NPORTS: 1789 /* 1790 * Check if we are being called from puc_bfe_attach() 1791 * or puc_bfe_probe(). If puc_bfe_probe(), we cannot 1792 * puc_get_bar(), so we return a value of 16. This has 1793 * cosmetic side-effects at worst; in PUC_CFG_GET_DESC, 1794 * sc->sc_cfg_data will not contain the true number of 1795 * ports in PUC_CFG_GET_DESC, but we are not implementing 1796 * that call for this device family anyway. 1797 * 1798 * The check is for initialization of sc->sc_bar[idx], 1799 * which is only done in puc_bfe_attach(). 1800 */ 1801 idx = 0; 1802 do { 1803 if (sc->sc_bar[idx++].b_rid != -1) { 1804 sc->sc_cfg_data = 16; 1805 *res = sc->sc_cfg_data; 1806 return (0); 1807 } 1808 } while (idx < PUC_PCI_BARS); 1809 1810 bar = puc_get_bar(sc, cfg->rid); 1811 if (bar == NULL) 1812 return (ENXIO); 1813 1814 value = bus_read_1(bar->b_res, 0x04); 1815 if (value == 0) 1816 return (ENXIO); 1817 1818 sc->sc_cfg_data = value; 1819 *res = sc->sc_cfg_data; 1820 return (0); 1821 case PUC_CFG_GET_OFS: 1822 *res = 0x1000 + (port << 9); 1823 return (0); 1824 case PUC_CFG_GET_TYPE: 1825 *res = PUC_TYPE_SERIAL; 1826 return (0); 1827 default: 1828 break; 1829 } 1830 return (ENXIO); 1831 } 1832 1833 static int 1834 puc_config_sunix(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1835 intptr_t *res) 1836 { 1837 int error; 1838 1839 switch (cmd) { 1840 case PUC_CFG_GET_OFS: 1841 error = puc_config(sc, PUC_CFG_GET_TYPE, port, res); 1842 if (error != 0) 1843 return (error); 1844 *res = (*res == PUC_TYPE_SERIAL) ? (port & 3) * 8 : 0; 1845 return (0); 1846 case PUC_CFG_GET_RID: 1847 error = puc_config(sc, PUC_CFG_GET_TYPE, port, res); 1848 if (error != 0) 1849 return (error); 1850 *res = (*res == PUC_TYPE_SERIAL && port <= 3) ? 0x10 : 0x14; 1851 return (0); 1852 default: 1853 break; 1854 } 1855 return (ENXIO); 1856 } 1857 1858 static int 1859 puc_config_titan(struct puc_softc *sc __unused, enum puc_cfg_cmd cmd, 1860 int port, intptr_t *res) 1861 { 1862 1863 switch (cmd) { 1864 case PUC_CFG_GET_OFS: 1865 *res = (port < 3) ? 0 : (port - 2) << 3; 1866 return (0); 1867 case PUC_CFG_GET_RID: 1868 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2); 1869 return (0); 1870 default: 1871 break; 1872 } 1873 return (ENXIO); 1874 } 1875