1 /*- 2 * Copyright (c) 2006 Marcel Moolenaar 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 /* 31 * PCI "universal" communications card driver configuration data (used to 32 * match/attach the cards). 33 */ 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/bus.h> 39 40 #include <machine/resource.h> 41 #include <machine/bus.h> 42 #include <sys/rman.h> 43 44 #include <dev/pci/pcivar.h> 45 46 #include <dev/puc/puc_bus.h> 47 #include <dev/puc/puc_cfg.h> 48 #include <dev/puc/puc_bfe.h> 49 50 static puc_config_f puc_config_amc; 51 static puc_config_f puc_config_cronyx; 52 static puc_config_f puc_config_diva; 53 static puc_config_f puc_config_icbook; 54 static puc_config_f puc_config_quatech; 55 static puc_config_f puc_config_syba; 56 static puc_config_f puc_config_siig; 57 static puc_config_f puc_config_timedia; 58 static puc_config_f puc_config_titan; 59 60 const struct puc_cfg puc_pci_devices[] = { 61 62 { 0x0009, 0x7168, 0xffff, 0, 63 "Sunix SUN1889", 64 DEFAULT_RCLK * 8, 65 PUC_PORT_2S, 0x10, 0, 8, 66 }, 67 68 { 0x103c, 0x1048, 0x103c, 0x1049, 69 "HP Diva Serial [GSP] Multiport UART - Tosca Console", 70 DEFAULT_RCLK, 71 PUC_PORT_3S, 0x10, 0, -1, 72 .config_function = puc_config_diva 73 }, 74 75 { 0x103c, 0x1048, 0x103c, 0x104a, 76 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary", 77 DEFAULT_RCLK, 78 PUC_PORT_2S, 0x10, 0, -1, 79 .config_function = puc_config_diva 80 }, 81 82 { 0x103c, 0x1048, 0x103c, 0x104b, 83 "HP Diva Serial [GSP] Multiport UART - Maestro SP2", 84 DEFAULT_RCLK, 85 PUC_PORT_4S, 0x10, 0, -1, 86 .config_function = puc_config_diva 87 }, 88 89 { 0x103c, 0x1048, 0x103c, 0x1223, 90 "HP Diva Serial [GSP] Multiport UART - Superdome Console", 91 DEFAULT_RCLK, 92 PUC_PORT_3S, 0x10, 0, -1, 93 .config_function = puc_config_diva 94 }, 95 96 { 0x103c, 0x1048, 0x103c, 0x1226, 97 "HP Diva Serial [GSP] Multiport UART - Keystone SP2", 98 DEFAULT_RCLK, 99 PUC_PORT_3S, 0x10, 0, -1, 100 .config_function = puc_config_diva 101 }, 102 103 { 0x103c, 0x1048, 0x103c, 0x1282, 104 "HP Diva Serial [GSP] Multiport UART - Everest SP2", 105 DEFAULT_RCLK, 106 PUC_PORT_3S, 0x10, 0, -1, 107 .config_function = puc_config_diva 108 }, 109 110 { 0x10b5, 0x1076, 0x10b5, 0x1076, 111 "VScom PCI-800", 112 DEFAULT_RCLK * 8, 113 PUC_PORT_8S, 0x18, 0, 8, 114 }, 115 116 { 0x10b5, 0x1077, 0x10b5, 0x1077, 117 "VScom PCI-400", 118 DEFAULT_RCLK * 8, 119 PUC_PORT_4S, 0x18, 0, 8, 120 }, 121 122 { 0x10b5, 0x1103, 0x10b5, 0x1103, 123 "VScom PCI-200", 124 DEFAULT_RCLK * 8, 125 PUC_PORT_2S, 0x18, 4, 0, 126 }, 127 128 /* 129 * Boca Research Turbo Serial 658 (8 serial port) card. 130 * Appears to be the same as Chase Research PLC PCI-FAST8 131 * and Perle PCI-FAST8 Multi-Port serial cards. 132 */ 133 { 0x10b5, 0x9050, 0x12e0, 0x0021, 134 "Boca Research Turbo Serial 658", 135 DEFAULT_RCLK * 4, 136 PUC_PORT_8S, 0x18, 0, 8, 137 }, 138 139 { 0x10b5, 0x9050, 0x12e0, 0x0031, 140 "Boca Research Turbo Serial 654", 141 DEFAULT_RCLK * 4, 142 PUC_PORT_4S, 0x18, 0, 8, 143 }, 144 145 /* 146 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with 147 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 148 * into the subsystem fields, and claims that it's a 149 * network/misc (0x02/0x80) device. 150 */ 151 { 0x10b5, 0x9050, 0xd84d, 0x6808, 152 "Dolphin Peripherals 4035", 153 DEFAULT_RCLK, 154 PUC_PORT_2S, 0x18, 4, 0, 155 }, 156 157 /* 158 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with 159 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 160 * into the subsystem fields, and claims that it's a 161 * network/misc (0x02/0x80) device. 162 */ 163 { 0x10b5, 0x9050, 0xd84d, 0x6810, 164 "Dolphin Peripherals 4014", 165 0, 166 PUC_PORT_2P, 0x20, 4, 0, 167 }, 168 169 { 0x10e8, 0x818e, 0xffff, 0, 170 "Applied Micro Circuits 8 Port UART", 171 DEFAULT_RCLK, 172 PUC_PORT_8S, 0x14, -1, -1, 173 .config_function = puc_config_amc 174 }, 175 176 { 0x11fe, 0x8010, 0xffff, 0, 177 "Comtrol RocketPort 550/8 RJ11 part A", 178 DEFAULT_RCLK * 4, 179 PUC_PORT_4S, 0x10, 0, 8, 180 }, 181 182 { 0x11fe, 0x8011, 0xffff, 0, 183 "Comtrol RocketPort 550/8 RJ11 part B", 184 DEFAULT_RCLK * 4, 185 PUC_PORT_4S, 0x10, 0, 8, 186 }, 187 188 { 0x11fe, 0x8012, 0xffff, 0, 189 "Comtrol RocketPort 550/8 Octa part A", 190 DEFAULT_RCLK * 4, 191 PUC_PORT_4S, 0x10, 0, 8, 192 }, 193 194 { 0x11fe, 0x8013, 0xffff, 0, 195 "Comtrol RocketPort 550/8 Octa part B", 196 DEFAULT_RCLK * 4, 197 PUC_PORT_4S, 0x10, 0, 8, 198 }, 199 200 { 0x11fe, 0x8014, 0xffff, 0, 201 "Comtrol RocketPort 550/4 RJ45", 202 DEFAULT_RCLK * 4, 203 PUC_PORT_4S, 0x10, 0, 8, 204 }, 205 206 { 0x11fe, 0x8015, 0xffff, 0, 207 "Comtrol RocketPort 550/Quad", 208 DEFAULT_RCLK * 4, 209 PUC_PORT_4S, 0x10, 0, 8, 210 }, 211 212 { 0x11fe, 0x8016, 0xffff, 0, 213 "Comtrol RocketPort 550/16 part A", 214 DEFAULT_RCLK * 4, 215 PUC_PORT_4S, 0x10, 0, 8, 216 }, 217 218 { 0x11fe, 0x8017, 0xffff, 0, 219 "Comtrol RocketPort 550/16 part B", 220 DEFAULT_RCLK * 4, 221 PUC_PORT_12S, 0x10, 0, 8, 222 }, 223 224 { 0x11fe, 0x8018, 0xffff, 0, 225 "Comtrol RocketPort 550/8 part A", 226 DEFAULT_RCLK * 4, 227 PUC_PORT_4S, 0x10, 0, 8, 228 }, 229 230 { 0x11fe, 0x8019, 0xffff, 0, 231 "Comtrol RocketPort 550/8 part B", 232 DEFAULT_RCLK * 4, 233 PUC_PORT_4S, 0x10, 0, 8, 234 }, 235 236 /* 237 * IBM SurePOS 300 Series (481033H) serial ports 238 * Details can be found on the IBM RSS websites 239 */ 240 241 { 0x1014, 0x0297, 0xffff, 0, 242 "IBM SurePOS 300 Series (481033H) serial ports", 243 DEFAULT_RCLK, 244 PUC_PORT_4S, 0x10, 4, 0 245 }, 246 247 /* 248 * SIIG Boards. 249 * 250 * SIIG provides documentation for their boards at: 251 * <URL:http://www.siig.com/downloads.asp> 252 */ 253 254 { 0x131f, 0x1010, 0xffff, 0, 255 "SIIG Cyber I/O PCI 16C550 (10x family)", 256 DEFAULT_RCLK, 257 PUC_PORT_1S1P, 0x18, 4, 0, 258 }, 259 260 { 0x131f, 0x1011, 0xffff, 0, 261 "SIIG Cyber I/O PCI 16C650 (10x family)", 262 DEFAULT_RCLK, 263 PUC_PORT_1S1P, 0x18, 4, 0, 264 }, 265 266 { 0x131f, 0x1012, 0xffff, 0, 267 "SIIG Cyber I/O PCI 16C850 (10x family)", 268 DEFAULT_RCLK, 269 PUC_PORT_1S1P, 0x18, 4, 0, 270 }, 271 272 { 0x131f, 0x1021, 0xffff, 0, 273 "SIIG Cyber Parallel Dual PCI (10x family)", 274 0, 275 PUC_PORT_2P, 0x18, 8, 0, 276 }, 277 278 { 0x131f, 0x1030, 0xffff, 0, 279 "SIIG Cyber Serial Dual PCI 16C550 (10x family)", 280 DEFAULT_RCLK, 281 PUC_PORT_2S, 0x18, 4, 0, 282 }, 283 284 { 0x131f, 0x1031, 0xffff, 0, 285 "SIIG Cyber Serial Dual PCI 16C650 (10x family)", 286 DEFAULT_RCLK, 287 PUC_PORT_2S, 0x18, 4, 0, 288 }, 289 290 { 0x131f, 0x1032, 0xffff, 0, 291 "SIIG Cyber Serial Dual PCI 16C850 (10x family)", 292 DEFAULT_RCLK, 293 PUC_PORT_2S, 0x18, 4, 0, 294 }, 295 296 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */ 297 "SIIG Cyber 2S1P PCI 16C550 (10x family)", 298 DEFAULT_RCLK, 299 PUC_PORT_2S1P, 0x18, 4, 0, 300 }, 301 302 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */ 303 "SIIG Cyber 2S1P PCI 16C650 (10x family)", 304 DEFAULT_RCLK, 305 PUC_PORT_2S1P, 0x18, 4, 0, 306 }, 307 308 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */ 309 "SIIG Cyber 2S1P PCI 16C850 (10x family)", 310 DEFAULT_RCLK, 311 PUC_PORT_2S1P, 0x18, 4, 0, 312 }, 313 314 { 0x131f, 0x1050, 0xffff, 0, 315 "SIIG Cyber 4S PCI 16C550 (10x family)", 316 DEFAULT_RCLK, 317 PUC_PORT_4S, 0x18, 4, 0, 318 }, 319 320 { 0x131f, 0x1051, 0xffff, 0, 321 "SIIG Cyber 4S PCI 16C650 (10x family)", 322 DEFAULT_RCLK, 323 PUC_PORT_4S, 0x18, 4, 0, 324 }, 325 326 { 0x131f, 0x1052, 0xffff, 0, 327 "SIIG Cyber 4S PCI 16C850 (10x family)", 328 DEFAULT_RCLK, 329 PUC_PORT_4S, 0x18, 4, 0, 330 }, 331 332 { 0x131f, 0x2010, 0xffff, 0, 333 "SIIG Cyber I/O PCI 16C550 (20x family)", 334 DEFAULT_RCLK, 335 PUC_PORT_1S1P, 0x10, 4, 0, 336 }, 337 338 { 0x131f, 0x2011, 0xffff, 0, 339 "SIIG Cyber I/O PCI 16C650 (20x family)", 340 DEFAULT_RCLK, 341 PUC_PORT_1S1P, 0x10, 4, 0, 342 }, 343 344 { 0x131f, 0x2012, 0xffff, 0, 345 "SIIG Cyber I/O PCI 16C850 (20x family)", 346 DEFAULT_RCLK, 347 PUC_PORT_1S1P, 0x10, 4, 0, 348 }, 349 350 { 0x131f, 0x2021, 0xffff, 0, 351 "SIIG Cyber Parallel Dual PCI (20x family)", 352 0, 353 PUC_PORT_2P, 0x10, 8, 0, 354 }, 355 356 { 0x131f, 0x2030, 0xffff, 0, 357 "SIIG Cyber Serial Dual PCI 16C550 (20x family)", 358 DEFAULT_RCLK, 359 PUC_PORT_2S, 0x10, 4, 0, 360 }, 361 362 { 0x131f, 0x2031, 0xffff, 0, 363 "SIIG Cyber Serial Dual PCI 16C650 (20x family)", 364 DEFAULT_RCLK, 365 PUC_PORT_2S, 0x10, 4, 0, 366 }, 367 368 { 0x131f, 0x2032, 0xffff, 0, 369 "SIIG Cyber Serial Dual PCI 16C850 (20x family)", 370 DEFAULT_RCLK, 371 PUC_PORT_2S, 0x10, 4, 0, 372 }, 373 374 { 0x131f, 0x2040, 0xffff, 0, 375 "SIIG Cyber 2P1S PCI 16C550 (20x family)", 376 DEFAULT_RCLK, 377 PUC_PORT_1S2P, 0x10, -1, 0, 378 .config_function = puc_config_siig 379 }, 380 381 { 0x131f, 0x2041, 0xffff, 0, 382 "SIIG Cyber 2P1S PCI 16C650 (20x family)", 383 DEFAULT_RCLK, 384 PUC_PORT_1S2P, 0x10, -1, 0, 385 .config_function = puc_config_siig 386 }, 387 388 { 0x131f, 0x2042, 0xffff, 0, 389 "SIIG Cyber 2P1S PCI 16C850 (20x family)", 390 DEFAULT_RCLK, 391 PUC_PORT_1S2P, 0x10, -1, 0, 392 .config_function = puc_config_siig 393 }, 394 395 { 0x131f, 0x2050, 0xffff, 0, 396 "SIIG Cyber 4S PCI 16C550 (20x family)", 397 DEFAULT_RCLK, 398 PUC_PORT_4S, 0x10, 4, 0, 399 }, 400 401 { 0x131f, 0x2051, 0xffff, 0, 402 "SIIG Cyber 4S PCI 16C650 (20x family)", 403 DEFAULT_RCLK, 404 PUC_PORT_4S, 0x10, 4, 0, 405 }, 406 407 { 0x131f, 0x2052, 0xffff, 0, 408 "SIIG Cyber 4S PCI 16C850 (20x family)", 409 DEFAULT_RCLK, 410 PUC_PORT_4S, 0x10, 4, 0, 411 }, 412 413 { 0x131f, 0x2060, 0xffff, 0, 414 "SIIG Cyber 2S1P PCI 16C550 (20x family)", 415 DEFAULT_RCLK, 416 PUC_PORT_2S1P, 0x10, 4, 0, 417 }, 418 419 { 0x131f, 0x2061, 0xffff, 0, 420 "SIIG Cyber 2S1P PCI 16C650 (20x family)", 421 DEFAULT_RCLK, 422 PUC_PORT_2S1P, 0x10, 4, 0, 423 }, 424 425 { 0x131f, 0x2062, 0xffff, 0, 426 "SIIG Cyber 2S1P PCI 16C850 (20x family)", 427 DEFAULT_RCLK, 428 PUC_PORT_2S1P, 0x10, 4, 0, 429 }, 430 431 { 0x131f, 0x2081, 0xffff, 0, 432 "SIIG PS8000 8S PCI 16C650 (20x family)", 433 DEFAULT_RCLK, 434 PUC_PORT_8S, 0x10, -1, -1, 435 .config_function = puc_config_siig 436 }, 437 438 { 0x135c, 0x0010, 0xffff, 0, 439 "Quatech QSC-100", 440 -3, /* max 8x clock rate */ 441 PUC_PORT_4S, 0x14, 0, 8, 442 .config_function = puc_config_quatech 443 }, 444 445 { 0x135c, 0x0020, 0xffff, 0, 446 "Quatech DSC-100", 447 -1, /* max 2x clock rate */ 448 PUC_PORT_2S, 0x14, 0, 8, 449 .config_function = puc_config_quatech 450 }, 451 452 { 0x135c, 0x0030, 0xffff, 0, 453 "Quatech DSC-200/300", 454 -1, /* max 2x clock rate */ 455 PUC_PORT_2S, 0x14, 0, 8, 456 .config_function = puc_config_quatech 457 }, 458 459 { 0x135c, 0x0040, 0xffff, 0, 460 "Quatech QSC-200/300", 461 -3, /* max 8x clock rate */ 462 PUC_PORT_4S, 0x14, 0, 8, 463 .config_function = puc_config_quatech 464 }, 465 466 { 0x135c, 0x0050, 0xffff, 0, 467 "Quatech ESC-100D", 468 -3, /* max 8x clock rate */ 469 PUC_PORT_8S, 0x14, 0, 8, 470 .config_function = puc_config_quatech 471 }, 472 473 { 0x135c, 0x0060, 0xffff, 0, 474 "Quatech ESC-100M", 475 -3, /* max 8x clock rate */ 476 PUC_PORT_8S, 0x14, 0, 8, 477 .config_function = puc_config_quatech 478 }, 479 480 { 0x135c, 0x0170, 0xffff, 0, 481 "Quatech QSCLP-100", 482 -1, /* max 2x clock rate */ 483 PUC_PORT_4S, 0x18, 0, 8, 484 .config_function = puc_config_quatech 485 }, 486 487 { 0x135c, 0x0180, 0xffff, 0, 488 "Quatech DSCLP-100", 489 -1, /* max 3x clock rate */ 490 PUC_PORT_2S, 0x18, 0, 8, 491 .config_function = puc_config_quatech 492 }, 493 494 { 0x135c, 0x01b0, 0xffff, 0, 495 "Quatech DSCLP-200/300", 496 -1, /* max 2x clock rate */ 497 PUC_PORT_2S, 0x18, 0, 8, 498 .config_function = puc_config_quatech 499 }, 500 501 { 0x135c, 0x01e0, 0xffff, 0, 502 "Quatech ESCLP-100", 503 -3, /* max 8x clock rate */ 504 PUC_PORT_8S, 0x10, 0, 8, 505 .config_function = puc_config_quatech 506 }, 507 508 { 0x1393, 0x1040, 0xffff, 0, 509 "Moxa Technologies, Smartio C104H/PCI", 510 DEFAULT_RCLK * 8, 511 PUC_PORT_4S, 0x18, 0, 8, 512 }, 513 514 { 0x1393, 0x1041, 0xffff, 0, 515 "Moxa Technologies, Smartio CP-104UL/PCI", 516 DEFAULT_RCLK * 8, 517 PUC_PORT_4S, 0x18, 0, 8, 518 }, 519 520 { 0x1393, 0x1043, 0xffff, 0, 521 "Moxa Technologies, Smartio CP-104EL/PCIe", 522 DEFAULT_RCLK * 8, 523 PUC_PORT_4S, 0x18, 0, 8, 524 }, 525 526 { 0x1393, 0x1141, 0xffff, 0, 527 "Moxa Technologies, Industio CP-114", 528 DEFAULT_RCLK * 8, 529 PUC_PORT_4S, 0x18, 0, 8, 530 }, 531 532 { 0x1393, 0x1680, 0xffff, 0, 533 "Moxa Technologies, C168H/PCI", 534 DEFAULT_RCLK * 8, 535 PUC_PORT_8S, 0x18, 0, 8, 536 }, 537 538 { 0x1393, 0x1681, 0xffff, 0, 539 "Moxa Technologies, C168U/PCI", 540 DEFAULT_RCLK * 8, 541 PUC_PORT_8S, 0x18, 0, 8, 542 }, 543 544 { 0x1393, 0x1682, 0xffff, 0, 545 "Moxa Technologies, CP-168EL/PCIe", 546 DEFAULT_RCLK * 8, 547 PUC_PORT_8S, 0x18, 0, 8, 548 }, 549 550 { 0x13a8, 0x0158, 0xffff, 0, 551 "Cronyx Omega2-PCI", 552 DEFAULT_RCLK * 8, 553 PUC_PORT_8S, 0x10, 0, -1, 554 .config_function = puc_config_cronyx 555 }, 556 557 { 0x1407, 0x0100, 0xffff, 0, 558 "Lava Computers Dual Serial", 559 DEFAULT_RCLK, 560 PUC_PORT_2S, 0x10, 4, 0, 561 }, 562 563 { 0x1407, 0x0101, 0xffff, 0, 564 "Lava Computers Quatro A", 565 DEFAULT_RCLK, 566 PUC_PORT_2S, 0x10, 4, 0, 567 }, 568 569 { 0x1407, 0x0102, 0xffff, 0, 570 "Lava Computers Quatro B", 571 DEFAULT_RCLK, 572 PUC_PORT_2S, 0x10, 4, 0, 573 }, 574 575 { 0x1407, 0x0120, 0xffff, 0, 576 "Lava Computers Quattro-PCI A", 577 DEFAULT_RCLK, 578 PUC_PORT_2S, 0x10, 4, 0, 579 }, 580 581 { 0x1407, 0x0121, 0xffff, 0, 582 "Lava Computers Quattro-PCI B", 583 DEFAULT_RCLK, 584 PUC_PORT_2S, 0x10, 4, 0, 585 }, 586 587 { 0x1407, 0x0180, 0xffff, 0, 588 "Lava Computers Octo A", 589 DEFAULT_RCLK, 590 PUC_PORT_4S, 0x10, 4, 0, 591 }, 592 593 { 0x1407, 0x0181, 0xffff, 0, 594 "Lava Computers Octo B", 595 DEFAULT_RCLK, 596 PUC_PORT_4S, 0x10, 4, 0, 597 }, 598 599 { 0x1409, 0x7268, 0xffff, 0, 600 "Sunix SUN1888", 601 0, 602 PUC_PORT_2P, 0x10, 0, 8, 603 }, 604 605 { 0x1409, 0x7168, 0xffff, 0, 606 NULL, 607 DEFAULT_RCLK * 8, 608 PUC_PORT_NONSTANDARD, 0x10, -1, -1, 609 .config_function = puc_config_timedia 610 }, 611 612 /* 613 * Boards with an Oxford Semiconductor chip. 614 * 615 * Oxford Semiconductor provides documentation for their chip at: 616 * <URL:http://www.oxsemi.com/products/uarts/index.html> 617 * 618 * As sold by Kouwell <URL:http://www.kouwell.com/>. 619 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. 620 */ 621 622 { 0x1415, 0x9501, 0x131f, 0x2050, 623 "SIIG Cyber 4 PCI 16550", 624 DEFAULT_RCLK * 10, 625 PUC_PORT_4S, 0x10, 0, 8, 626 }, 627 628 { 0x1415, 0x9501, 0x131f, 0x2051, 629 "SIIG Cyber 4S PCI 16C650 (20x family)", 630 DEFAULT_RCLK * 10, 631 PUC_PORT_4S, 0x10, 0, 8, 632 }, 633 634 { 0x1415, 0x9501, 0xffff, 0, 635 "Oxford Semiconductor OX16PCI954 UARTs", 636 DEFAULT_RCLK, 637 PUC_PORT_4S, 0x10, 0, 8, 638 }, 639 640 { 0x1415, 0x950a, 0xffff, 0, 641 "Oxford Semiconductor OX16PCI954 UARTs", 642 DEFAULT_RCLK, 643 PUC_PORT_4S, 0x10, 0, 8, 644 }, 645 646 { 0x1415, 0x9511, 0xffff, 0, 647 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)", 648 DEFAULT_RCLK, 649 PUC_PORT_4S, 0x10, 0, 8, 650 }, 651 652 { 0x1415, 0x9521, 0xffff, 0, 653 "Oxford Semiconductor OX16PCI952 UARTs", 654 DEFAULT_RCLK, 655 PUC_PORT_2S, 0x10, 4, 0, 656 }, 657 658 { 0x1415, 0x9538, 0xffff, 0, 659 "Oxford Semiconductor OX16PCI958 UARTs", 660 DEFAULT_RCLK * 10, 661 PUC_PORT_8S, 0x18, 0, 8, 662 }, 663 664 { 0x14d2, 0x8010, 0xffff, 0, 665 "VScom PCI-100L", 666 DEFAULT_RCLK * 8, 667 PUC_PORT_1S, 0x14, 0, 0, 668 }, 669 670 { 0x14d2, 0x8020, 0xffff, 0, 671 "VScom PCI-200L", 672 DEFAULT_RCLK * 8, 673 PUC_PORT_2S, 0x14, 4, 0, 674 }, 675 676 { 0x14d2, 0x8028, 0xffff, 0, 677 "VScom 200Li", 678 DEFAULT_RCLK, 679 PUC_PORT_2S, 0x20, 0, 8, 680 }, 681 682 /* 683 * VScom (Titan?) PCI-800L. More modern variant of the 684 * PCI-800. Uses 6 discrete 16550 UARTs, plus another 685 * two of them obviously implemented as macro cells in 686 * the ASIC. This causes the weird port access pattern 687 * below, where two of the IO port ranges each access 688 * one of the ASIC UARTs, and a block of IO addresses 689 * access the external UARTs. 690 */ 691 { 0x14d2, 0x8080, 0xffff, 0, 692 "Titan VScom PCI-800L", 693 DEFAULT_RCLK * 8, 694 PUC_PORT_8S, 0x14, -1, -1, 695 .config_function = puc_config_titan 696 }, 697 698 /* 699 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers 700 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has 701 * device ID 3 and PCI device 1 device ID 4. 702 */ 703 { 0x14d2, 0xa003, 0xffff, 0, 704 "Titan PCI-800H", 705 DEFAULT_RCLK * 8, 706 PUC_PORT_4S, 0x10, 0, 8, 707 }, 708 { 0x14d2, 0xa004, 0xffff, 0, 709 "Titan PCI-800H", 710 DEFAULT_RCLK * 8, 711 PUC_PORT_4S, 0x10, 0, 8, 712 }, 713 714 { 0x14d2, 0xa005, 0xffff, 0, 715 "Titan PCI-200H", 716 DEFAULT_RCLK * 8, 717 PUC_PORT_2S, 0x10, 0, 8, 718 }, 719 720 { 0x14d2, 0xe020, 0xffff, 0, 721 "Titan VScom PCI-200HV2", 722 DEFAULT_RCLK * 8, 723 PUC_PORT_2S, 0x10, 4, 0, 724 }, 725 726 { 0x14db, 0x2130, 0xffff, 0, 727 "Avlab Technology, PCI IO 2S", 728 DEFAULT_RCLK, 729 PUC_PORT_2S, 0x10, 4, 0, 730 }, 731 732 { 0x14db, 0x2150, 0xffff, 0, 733 "Avlab Low Profile PCI 4 Serial", 734 DEFAULT_RCLK, 735 PUC_PORT_4S, 0x10, 4, 0, 736 }, 737 738 { 0x14db, 0x2152, 0xffff, 0, 739 "Avlab Low Profile PCI 4 Serial", 740 DEFAULT_RCLK, 741 PUC_PORT_4S, 0x10, 4, 0, 742 }, 743 744 { 0x1592, 0x0781, 0xffff, 0, 745 "Syba Tech Ltd. PCI-4S2P-550-ECP", 746 DEFAULT_RCLK, 747 PUC_PORT_4S1P, 0x10, 0, -1, 748 .config_function = puc_config_syba 749 }, 750 751 { 0x6666, 0x0001, 0xffff, 0, 752 "Decision Computer Inc, PCCOM 4-port serial", 753 DEFAULT_RCLK, 754 PUC_PORT_4S, 0x1c, 0, 8, 755 }, 756 757 { 0x6666, 0x0002, 0xffff, 0, 758 "Decision Computer Inc, PCCOM 8-port serial", 759 DEFAULT_RCLK, 760 PUC_PORT_8S, 0x1c, 0, 8, 761 }, 762 763 { 0x6666, 0x0004, 0xffff, 0, 764 "PCCOM dual port RS232/422/485", 765 DEFAULT_RCLK, 766 PUC_PORT_2S, 0x1c, 0, 8, 767 }, 768 769 { 0x9710, 0x9815, 0xffff, 0, 770 "NetMos NM9815 Dual 1284 Printer port", 771 0, 772 PUC_PORT_2P, 0x10, 8, 0, 773 }, 774 775 /* 776 * This is more specific than the generic NM9835 entry that follows, and 777 * is placed here to _prevent_ puc from claiming this single port card. 778 * 779 * uart(4) will claim this device. 780 */ 781 { 0x9710, 0x9835, 0x1000, 1, 782 "NetMos NM9835 based 1-port serial", 783 DEFAULT_RCLK, 784 PUC_PORT_1S, 0x10, 4, 0, 785 }, 786 787 { 0x9710, 0x9835, 0xffff, 0, 788 "NetMos NM9835 Dual UART and 1284 Printer port", 789 DEFAULT_RCLK, 790 PUC_PORT_2S1P, 0x10, 4, 0, 791 }, 792 793 { 0x9710, 0x9845, 0x1000, 0x0006, 794 "NetMos NM9845 6 Port UART", 795 DEFAULT_RCLK, 796 PUC_PORT_6S, 0x10, 4, 0, 797 }, 798 799 { 0x9710, 0x9845, 0xffff, 0, 800 "NetMos NM9845 Quad UART and 1284 Printer port", 801 DEFAULT_RCLK, 802 PUC_PORT_4S1P, 0x10, 4, 0, 803 }, 804 805 { 0xb00c, 0x021c, 0xffff, 0, 806 "IC Book Labs Gunboat x4 Lite", 807 DEFAULT_RCLK, 808 PUC_PORT_4S, 0x10, 0, 8, 809 .config_function = puc_config_icbook 810 }, 811 812 { 0xb00c, 0x031c, 0xffff, 0, 813 "IC Book Labs Gunboat x4 Pro", 814 DEFAULT_RCLK, 815 PUC_PORT_4S, 0x10, 0, 8, 816 .config_function = puc_config_icbook 817 }, 818 819 { 0xb00c, 0x041c, 0xffff, 0, 820 "IC Book Labs Ironclad x8 Lite", 821 DEFAULT_RCLK, 822 PUC_PORT_8S, 0x10, 0, 8, 823 .config_function = puc_config_icbook 824 }, 825 826 { 0xb00c, 0x051c, 0xffff, 0, 827 "IC Book Labs Ironclad x8 Pro", 828 DEFAULT_RCLK, 829 PUC_PORT_8S, 0x10, 0, 8, 830 .config_function = puc_config_icbook 831 }, 832 833 { 0xb00c, 0x081c, 0xffff, 0, 834 "IC Book Labs Dreadnought x16 Pro", 835 DEFAULT_RCLK * 8, 836 PUC_PORT_16S, 0x10, 0, 8, 837 .config_function = puc_config_icbook 838 }, 839 840 { 0xb00c, 0x091c, 0xffff, 0, 841 "IC Book Labs Dreadnought x16 Lite", 842 DEFAULT_RCLK, 843 PUC_PORT_16S, 0x10, 0, 8, 844 .config_function = puc_config_icbook 845 }, 846 847 { 0xb00c, 0x0a1c, 0xffff, 0, 848 "IC Book Labs Gunboat x2 Low Profile", 849 DEFAULT_RCLK, 850 PUC_PORT_2S, 0x10, 0, 8, 851 }, 852 853 { 0xb00c, 0x0b1c, 0xffff, 0, 854 "IC Book Labs Gunboat x4 Low Profile", 855 DEFAULT_RCLK, 856 PUC_PORT_4S, 0x10, 0, 8, 857 .config_function = puc_config_icbook 858 }, 859 860 { 0xffff, 0, 0xffff, 0, NULL, 0 } 861 }; 862 863 static int 864 puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 865 intptr_t *res) 866 { 867 switch (cmd) { 868 case PUC_CFG_GET_OFS: 869 *res = 8 * (port & 1); 870 return (0); 871 case PUC_CFG_GET_RID: 872 *res = 0x14 + (port >> 1) * 4; 873 return (0); 874 default: 875 break; 876 } 877 return (ENXIO); 878 } 879 880 static int 881 puc_config_cronyx(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 882 intptr_t *res) 883 { 884 if (cmd == PUC_CFG_GET_OFS) { 885 *res = port * 0x200; 886 return (0); 887 } 888 return (ENXIO); 889 } 890 891 static int 892 puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 893 intptr_t *res) 894 { 895 const struct puc_cfg *cfg = sc->sc_cfg; 896 897 if (cmd == PUC_CFG_GET_OFS) { 898 if (cfg->subdevice == 0x1282) /* Everest SP */ 899 port <<= 1; 900 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */ 901 port = (port == 3) ? 4 : port; 902 *res = port * 8 + ((port > 2) ? 0x18 : 0); 903 return (0); 904 } 905 return (ENXIO); 906 } 907 908 static int 909 puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 910 intptr_t *res) 911 { 912 if (cmd == PUC_CFG_GET_ILR) { 913 *res = PUC_ILR_DIGI; 914 return (0); 915 } 916 return (ENXIO); 917 } 918 919 static int 920 puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 921 intptr_t *res) 922 { 923 const struct puc_cfg *cfg = sc->sc_cfg; 924 struct puc_bar *bar; 925 uint8_t v0, v1; 926 927 switch (cmd) { 928 case PUC_CFG_SETUP: 929 /* 930 * Check if the scratchpad register is enabled or if the 931 * interrupt status and options registers are active. 932 */ 933 bar = puc_get_bar(sc, cfg->rid); 934 if (bar == NULL) 935 return (ENXIO); 936 /* Set DLAB in the LCR register of UART 0. */ 937 bus_write_1(bar->b_res, 3, 0x80); 938 /* Write 0 to the SPR register of UART 0. */ 939 bus_write_1(bar->b_res, 7, 0); 940 /* Read back the contents of the SPR register of UART 0. */ 941 v0 = bus_read_1(bar->b_res, 7); 942 /* Write a specific value to the SPR register of UART 0. */ 943 bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock); 944 /* Read back the contents of the SPR register of UART 0. */ 945 v1 = bus_read_1(bar->b_res, 7); 946 /* Clear DLAB in the LCR register of UART 0. */ 947 bus_write_1(bar->b_res, 3, 0); 948 /* Save the two values read-back from the SPR register. */ 949 sc->sc_cfg_data = (v0 << 8) | v1; 950 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 951 /* 952 * The SPR register echoed the two values written 953 * by us. This means that the SPAD jumper is set. 954 */ 955 device_printf(sc->sc_dev, "warning: extra features " 956 "not usable -- SPAD compatibility enabled\n"); 957 return (0); 958 } 959 if (v0 != 0) { 960 /* 961 * The first value doesn't match. This can only mean 962 * that the SPAD jumper is not set and that a non- 963 * standard fixed clock multiplier jumper is set. 964 */ 965 if (bootverbose) 966 device_printf(sc->sc_dev, "fixed clock rate " 967 "multiplier of %d\n", 1 << v0); 968 if (v0 < -cfg->clock) 969 device_printf(sc->sc_dev, "warning: " 970 "suboptimal fixed clock rate multiplier " 971 "setting\n"); 972 return (0); 973 } 974 /* 975 * The first value matched, but the second didn't. We know 976 * that the SPAD jumper is not set. We also know that the 977 * clock rate multiplier is software controlled *and* that 978 * we just programmed it to the maximum allowed. 979 */ 980 if (bootverbose) 981 device_printf(sc->sc_dev, "clock rate multiplier of " 982 "%d selected\n", 1 << -cfg->clock); 983 return (0); 984 case PUC_CFG_GET_CLOCK: 985 v0 = (sc->sc_cfg_data >> 8) & 0xff; 986 v1 = sc->sc_cfg_data & 0xff; 987 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 988 /* 989 * XXX With the SPAD jumper applied, there's no 990 * easy way of knowing if there's also a clock 991 * rate multiplier jumper installed. Let's hope 992 * not... 993 */ 994 *res = DEFAULT_RCLK; 995 } else if (v0 == 0) { 996 /* 997 * No clock rate multiplier jumper installed, 998 * so we programmed the board with the maximum 999 * multiplier allowed as given to us in the 1000 * clock field of the config record (negated). 1001 */ 1002 *res = DEFAULT_RCLK << -cfg->clock; 1003 } else 1004 *res = DEFAULT_RCLK << v0; 1005 return (0); 1006 case PUC_CFG_GET_ILR: 1007 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1008 v1 = sc->sc_cfg_data & 0xff; 1009 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock) 1010 ? PUC_ILR_NONE : PUC_ILR_QUATECH; 1011 return (0); 1012 default: 1013 break; 1014 } 1015 return (ENXIO); 1016 } 1017 1018 static int 1019 puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1020 intptr_t *res) 1021 { 1022 static int base[] = { 0x251, 0x3f0, 0 }; 1023 const struct puc_cfg *cfg = sc->sc_cfg; 1024 struct puc_bar *bar; 1025 int efir, idx, ofs; 1026 uint8_t v; 1027 1028 switch (cmd) { 1029 case PUC_CFG_SETUP: 1030 bar = puc_get_bar(sc, cfg->rid); 1031 if (bar == NULL) 1032 return (ENXIO); 1033 1034 /* configure both W83877TFs */ 1035 bus_write_1(bar->b_res, 0x250, 0x89); 1036 bus_write_1(bar->b_res, 0x3f0, 0x87); 1037 bus_write_1(bar->b_res, 0x3f0, 0x87); 1038 idx = 0; 1039 while (base[idx] != 0) { 1040 efir = base[idx]; 1041 bus_write_1(bar->b_res, efir, 0x09); 1042 v = bus_read_1(bar->b_res, efir + 1); 1043 if ((v & 0x0f) != 0x0c) 1044 return (ENXIO); 1045 bus_write_1(bar->b_res, efir, 0x16); 1046 v = bus_read_1(bar->b_res, efir + 1); 1047 bus_write_1(bar->b_res, efir, 0x16); 1048 bus_write_1(bar->b_res, efir + 1, v | 0x04); 1049 bus_write_1(bar->b_res, efir, 0x16); 1050 bus_write_1(bar->b_res, efir + 1, v & ~0x04); 1051 ofs = base[idx] & 0x300; 1052 bus_write_1(bar->b_res, efir, 0x23); 1053 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2); 1054 bus_write_1(bar->b_res, efir, 0x24); 1055 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2); 1056 bus_write_1(bar->b_res, efir, 0x25); 1057 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2); 1058 bus_write_1(bar->b_res, efir, 0x17); 1059 bus_write_1(bar->b_res, efir + 1, 0x03); 1060 bus_write_1(bar->b_res, efir, 0x28); 1061 bus_write_1(bar->b_res, efir + 1, 0x43); 1062 idx++; 1063 } 1064 bus_write_1(bar->b_res, 0x250, 0xaa); 1065 bus_write_1(bar->b_res, 0x3f0, 0xaa); 1066 return (0); 1067 case PUC_CFG_GET_OFS: 1068 switch (port) { 1069 case 0: 1070 *res = 0x2f8; 1071 return (0); 1072 case 1: 1073 *res = 0x2e8; 1074 return (0); 1075 case 2: 1076 *res = 0x3f8; 1077 return (0); 1078 case 3: 1079 *res = 0x3e8; 1080 return (0); 1081 case 4: 1082 *res = 0x278; 1083 return (0); 1084 } 1085 break; 1086 default: 1087 break; 1088 } 1089 return (ENXIO); 1090 } 1091 1092 static int 1093 puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1094 intptr_t *res) 1095 { 1096 const struct puc_cfg *cfg = sc->sc_cfg; 1097 1098 switch (cmd) { 1099 case PUC_CFG_GET_OFS: 1100 if (cfg->ports == PUC_PORT_8S) { 1101 *res = (port > 4) ? 8 * (port - 4) : 0; 1102 return (0); 1103 } 1104 break; 1105 case PUC_CFG_GET_RID: 1106 if (cfg->ports == PUC_PORT_8S) { 1107 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port); 1108 return (0); 1109 } 1110 if (cfg->ports == PUC_PORT_2S1P) { 1111 switch (port) { 1112 case 0: *res = 0x10; return (0); 1113 case 1: *res = 0x14; return (0); 1114 case 2: *res = 0x1c; return (0); 1115 } 1116 } 1117 break; 1118 default: 1119 break; 1120 } 1121 return (ENXIO); 1122 } 1123 1124 static int 1125 puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1126 intptr_t *res) 1127 { 1128 static uint16_t dual[] = { 1129 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 1130 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 1131 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 1132 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 1133 0xD079, 0 1134 }; 1135 static uint16_t quad[] = { 1136 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 1137 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 1138 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 1139 0xB157, 0 1140 }; 1141 static uint16_t octa[] = { 1142 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 1143 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 1144 }; 1145 static struct { 1146 int ports; 1147 uint16_t *ids; 1148 } subdevs[] = { 1149 { 2, dual }, 1150 { 4, quad }, 1151 { 8, octa }, 1152 { 0, NULL } 1153 }; 1154 static char desc[64]; 1155 int dev, id; 1156 uint16_t subdev; 1157 1158 switch (cmd) { 1159 case PUC_CFG_GET_DESC: 1160 snprintf(desc, sizeof(desc), 1161 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data); 1162 *res = (intptr_t)desc; 1163 return (0); 1164 case PUC_CFG_GET_NPORTS: 1165 subdev = pci_get_subdevice(sc->sc_dev); 1166 dev = 0; 1167 while (subdevs[dev].ports != 0) { 1168 id = 0; 1169 while (subdevs[dev].ids[id] != 0) { 1170 if (subdev == subdevs[dev].ids[id]) { 1171 sc->sc_cfg_data = subdevs[dev].ports; 1172 *res = sc->sc_cfg_data; 1173 return (0); 1174 } 1175 id++; 1176 } 1177 dev++; 1178 } 1179 return (ENXIO); 1180 case PUC_CFG_GET_OFS: 1181 *res = (port == 1 || port == 3) ? 8 : 0; 1182 return (0); 1183 case PUC_CFG_GET_RID: 1184 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4; 1185 return (0); 1186 case PUC_CFG_GET_TYPE: 1187 *res = PUC_TYPE_SERIAL; 1188 return (0); 1189 default: 1190 break; 1191 } 1192 return (ENXIO); 1193 } 1194 1195 static int 1196 puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1197 intptr_t *res) 1198 { 1199 switch (cmd) { 1200 case PUC_CFG_GET_OFS: 1201 *res = (port < 3) ? 0 : (port - 2) << 3; 1202 return (0); 1203 case PUC_CFG_GET_RID: 1204 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2); 1205 return (0); 1206 default: 1207 break; 1208 } 1209 return (ENXIO); 1210 } 1211