1 /*- 2 * Copyright (c) 2006 Marcel Moolenaar 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 /* 31 * PCI "universal" communications card driver configuration data (used to 32 * match/attach the cards). 33 */ 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/bus.h> 39 40 #include <machine/resource.h> 41 #include <machine/bus.h> 42 #include <sys/rman.h> 43 44 #include <dev/pci/pcivar.h> 45 46 #include <dev/puc/puc_bus.h> 47 #include <dev/puc/puc_cfg.h> 48 #include <dev/puc/puc_bfe.h> 49 50 static puc_config_f puc_config_amc; 51 static puc_config_f puc_config_cronyx; 52 static puc_config_f puc_config_diva; 53 static puc_config_f puc_config_icbook; 54 static puc_config_f puc_config_quatech; 55 static puc_config_f puc_config_syba; 56 static puc_config_f puc_config_siig; 57 static puc_config_f puc_config_timedia; 58 static puc_config_f puc_config_titan; 59 60 const struct puc_cfg puc_pci_devices[] = { 61 62 { 0x0009, 0x7168, 0xffff, 0, 63 "Sunix SUN1889", 64 DEFAULT_RCLK * 8, 65 PUC_PORT_2S, 0x10, 0, 8, 66 }, 67 68 { 0x103c, 0x1048, 0x103c, 0x1049, 69 "HP Diva Serial [GSP] Multiport UART - Tosca Console", 70 DEFAULT_RCLK, 71 PUC_PORT_3S, 0x10, 0, -1, 72 .config_function = puc_config_diva 73 }, 74 75 { 0x103c, 0x1048, 0x103c, 0x104a, 76 "HP Diva Serial [GSP] Multiport UART - Tosca Secondary", 77 DEFAULT_RCLK, 78 PUC_PORT_2S, 0x10, 0, -1, 79 .config_function = puc_config_diva 80 }, 81 82 { 0x103c, 0x1048, 0x103c, 0x104b, 83 "HP Diva Serial [GSP] Multiport UART - Maestro SP2", 84 DEFAULT_RCLK, 85 PUC_PORT_4S, 0x10, 0, -1, 86 .config_function = puc_config_diva 87 }, 88 89 { 0x103c, 0x1048, 0x103c, 0x1223, 90 "HP Diva Serial [GSP] Multiport UART - Superdome Console", 91 DEFAULT_RCLK, 92 PUC_PORT_3S, 0x10, 0, -1, 93 .config_function = puc_config_diva 94 }, 95 96 { 0x103c, 0x1048, 0x103c, 0x1226, 97 "HP Diva Serial [GSP] Multiport UART - Keystone SP2", 98 DEFAULT_RCLK, 99 PUC_PORT_3S, 0x10, 0, -1, 100 .config_function = puc_config_diva 101 }, 102 103 { 0x103c, 0x1048, 0x103c, 0x1282, 104 "HP Diva Serial [GSP] Multiport UART - Everest SP2", 105 DEFAULT_RCLK, 106 PUC_PORT_3S, 0x10, 0, -1, 107 .config_function = puc_config_diva 108 }, 109 110 { 0x10b5, 0x1076, 0x10b5, 0x1076, 111 "VScom PCI-800", 112 DEFAULT_RCLK * 8, 113 PUC_PORT_8S, 0x18, 0, 8, 114 }, 115 116 { 0x10b5, 0x1077, 0x10b5, 0x1077, 117 "VScom PCI-400", 118 DEFAULT_RCLK * 8, 119 PUC_PORT_4S, 0x18, 0, 8, 120 }, 121 122 { 0x10b5, 0x1103, 0x10b5, 0x1103, 123 "VScom PCI-200", 124 DEFAULT_RCLK * 8, 125 PUC_PORT_2S, 0x18, 4, 0, 126 }, 127 128 /* 129 * Boca Research Turbo Serial 658 (8 serial port) card. 130 * Appears to be the same as Chase Research PLC PCI-FAST8 131 * and Perle PCI-FAST8 Multi-Port serial cards. 132 */ 133 { 0x10b5, 0x9050, 0x12e0, 0x0021, 134 "Boca Research Turbo Serial 658", 135 DEFAULT_RCLK * 4, 136 PUC_PORT_8S, 0x18, 0, 8, 137 }, 138 139 { 0x10b5, 0x9050, 0x12e0, 0x0031, 140 "Boca Research Turbo Serial 654", 141 DEFAULT_RCLK * 4, 142 PUC_PORT_4S, 0x18, 0, 8, 143 }, 144 145 /* 146 * Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with 147 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 148 * into the subsystem fields, and claims that it's a 149 * network/misc (0x02/0x80) device. 150 */ 151 { 0x10b5, 0x9050, 0xd84d, 0x6808, 152 "Dolphin Peripherals 4035", 153 DEFAULT_RCLK, 154 PUC_PORT_2S, 0x18, 4, 0, 155 }, 156 157 /* 158 * Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with 159 * a seemingly-lame EEPROM setup that puts the Dolphin IDs 160 * into the subsystem fields, and claims that it's a 161 * network/misc (0x02/0x80) device. 162 */ 163 { 0x10b5, 0x9050, 0xd84d, 0x6810, 164 "Dolphin Peripherals 4014", 165 0, 166 PUC_PORT_2P, 0x20, 4, 0, 167 }, 168 169 { 0x10e8, 0x818e, 0xffff, 0, 170 "Applied Micro Circuits 8 Port UART", 171 DEFAULT_RCLK, 172 PUC_PORT_8S, 0x14, -1, -1, 173 .config_function = puc_config_amc 174 }, 175 176 { 0x11fe, 0x8010, 0xffff, 0, 177 "Comtrol RocketPort 550/8 RJ11 part A", 178 DEFAULT_RCLK * 4, 179 PUC_PORT_4S, 0x10, 0, 8, 180 }, 181 182 { 0x11fe, 0x8011, 0xffff, 0, 183 "Comtrol RocketPort 550/8 RJ11 part B", 184 DEFAULT_RCLK * 4, 185 PUC_PORT_4S, 0x10, 0, 8, 186 }, 187 188 { 0x11fe, 0x8012, 0xffff, 0, 189 "Comtrol RocketPort 550/8 Octa part A", 190 DEFAULT_RCLK * 4, 191 PUC_PORT_4S, 0x10, 0, 8, 192 }, 193 194 { 0x11fe, 0x8013, 0xffff, 0, 195 "Comtrol RocketPort 550/8 Octa part B", 196 DEFAULT_RCLK * 4, 197 PUC_PORT_4S, 0x10, 0, 8, 198 }, 199 200 { 0x11fe, 0x8014, 0xffff, 0, 201 "Comtrol RocketPort 550/4 RJ45", 202 DEFAULT_RCLK * 4, 203 PUC_PORT_4S, 0x10, 0, 8, 204 }, 205 206 { 0x11fe, 0x8015, 0xffff, 0, 207 "Comtrol RocketPort 550/Quad", 208 DEFAULT_RCLK * 4, 209 PUC_PORT_4S, 0x10, 0, 8, 210 }, 211 212 { 0x11fe, 0x8016, 0xffff, 0, 213 "Comtrol RocketPort 550/16 part A", 214 DEFAULT_RCLK * 4, 215 PUC_PORT_4S, 0x10, 0, 8, 216 }, 217 218 { 0x11fe, 0x8017, 0xffff, 0, 219 "Comtrol RocketPort 550/16 part B", 220 DEFAULT_RCLK * 4, 221 PUC_PORT_12S, 0x10, 0, 8, 222 }, 223 224 { 0x11fe, 0x8018, 0xffff, 0, 225 "Comtrol RocketPort 550/8 part A", 226 DEFAULT_RCLK * 4, 227 PUC_PORT_4S, 0x10, 0, 8, 228 }, 229 230 { 0x11fe, 0x8019, 0xffff, 0, 231 "Comtrol RocketPort 550/8 part B", 232 DEFAULT_RCLK * 4, 233 PUC_PORT_4S, 0x10, 0, 8, 234 }, 235 236 /* 237 * IBM SurePOS 300 Series (481033H) serial ports 238 * Details can be found on the IBM RSS websites 239 */ 240 241 { 0x1014, 0x0297, 0xffff, 0, 242 "IBM SurePOS 300 Series (481033H) serial ports", 243 DEFAULT_RCLK, 244 PUC_PORT_4S, 0x10, 4, 0 245 }, 246 247 /* 248 * SIIG Boards. 249 * 250 * SIIG provides documentation for their boards at: 251 * <URL:http://www.siig.com/downloads.asp> 252 */ 253 254 { 0x131f, 0x1010, 0xffff, 0, 255 "SIIG Cyber I/O PCI 16C550 (10x family)", 256 DEFAULT_RCLK, 257 PUC_PORT_1S1P, 0x18, 4, 0, 258 }, 259 260 { 0x131f, 0x1011, 0xffff, 0, 261 "SIIG Cyber I/O PCI 16C650 (10x family)", 262 DEFAULT_RCLK, 263 PUC_PORT_1S1P, 0x18, 4, 0, 264 }, 265 266 { 0x131f, 0x1012, 0xffff, 0, 267 "SIIG Cyber I/O PCI 16C850 (10x family)", 268 DEFAULT_RCLK, 269 PUC_PORT_1S1P, 0x18, 4, 0, 270 }, 271 272 { 0x131f, 0x1021, 0xffff, 0, 273 "SIIG Cyber Parallel Dual PCI (10x family)", 274 0, 275 PUC_PORT_2P, 0x18, 8, 0, 276 }, 277 278 { 0x131f, 0x1030, 0xffff, 0, 279 "SIIG Cyber Serial Dual PCI 16C550 (10x family)", 280 DEFAULT_RCLK, 281 PUC_PORT_2S, 0x18, 4, 0, 282 }, 283 284 { 0x131f, 0x1031, 0xffff, 0, 285 "SIIG Cyber Serial Dual PCI 16C650 (10x family)", 286 DEFAULT_RCLK, 287 PUC_PORT_2S, 0x18, 4, 0, 288 }, 289 290 { 0x131f, 0x1032, 0xffff, 0, 291 "SIIG Cyber Serial Dual PCI 16C850 (10x family)", 292 DEFAULT_RCLK, 293 PUC_PORT_2S, 0x18, 4, 0, 294 }, 295 296 { 0x131f, 0x1034, 0xffff, 0, /* XXX really? */ 297 "SIIG Cyber 2S1P PCI 16C550 (10x family)", 298 DEFAULT_RCLK, 299 PUC_PORT_2S1P, 0x18, 4, 0, 300 }, 301 302 { 0x131f, 0x1035, 0xffff, 0, /* XXX really? */ 303 "SIIG Cyber 2S1P PCI 16C650 (10x family)", 304 DEFAULT_RCLK, 305 PUC_PORT_2S1P, 0x18, 4, 0, 306 }, 307 308 { 0x131f, 0x1036, 0xffff, 0, /* XXX really? */ 309 "SIIG Cyber 2S1P PCI 16C850 (10x family)", 310 DEFAULT_RCLK, 311 PUC_PORT_2S1P, 0x18, 4, 0, 312 }, 313 314 { 0x131f, 0x1050, 0xffff, 0, 315 "SIIG Cyber 4S PCI 16C550 (10x family)", 316 DEFAULT_RCLK, 317 PUC_PORT_4S, 0x18, 4, 0, 318 }, 319 320 { 0x131f, 0x1051, 0xffff, 0, 321 "SIIG Cyber 4S PCI 16C650 (10x family)", 322 DEFAULT_RCLK, 323 PUC_PORT_4S, 0x18, 4, 0, 324 }, 325 326 { 0x131f, 0x1052, 0xffff, 0, 327 "SIIG Cyber 4S PCI 16C850 (10x family)", 328 DEFAULT_RCLK, 329 PUC_PORT_4S, 0x18, 4, 0, 330 }, 331 332 { 0x131f, 0x2010, 0xffff, 0, 333 "SIIG Cyber I/O PCI 16C550 (20x family)", 334 DEFAULT_RCLK, 335 PUC_PORT_1S1P, 0x10, 4, 0, 336 }, 337 338 { 0x131f, 0x2011, 0xffff, 0, 339 "SIIG Cyber I/O PCI 16C650 (20x family)", 340 DEFAULT_RCLK, 341 PUC_PORT_1S1P, 0x10, 4, 0, 342 }, 343 344 { 0x131f, 0x2012, 0xffff, 0, 345 "SIIG Cyber I/O PCI 16C850 (20x family)", 346 DEFAULT_RCLK, 347 PUC_PORT_1S1P, 0x10, 4, 0, 348 }, 349 350 { 0x131f, 0x2021, 0xffff, 0, 351 "SIIG Cyber Parallel Dual PCI (20x family)", 352 0, 353 PUC_PORT_2P, 0x10, 8, 0, 354 }, 355 356 { 0x131f, 0x2030, 0xffff, 0, 357 "SIIG Cyber Serial Dual PCI 16C550 (20x family)", 358 DEFAULT_RCLK, 359 PUC_PORT_2S, 0x10, 4, 0, 360 }, 361 362 { 0x131f, 0x2031, 0xffff, 0, 363 "SIIG Cyber Serial Dual PCI 16C650 (20x family)", 364 DEFAULT_RCLK, 365 PUC_PORT_2S, 0x10, 4, 0, 366 }, 367 368 { 0x131f, 0x2032, 0xffff, 0, 369 "SIIG Cyber Serial Dual PCI 16C850 (20x family)", 370 DEFAULT_RCLK, 371 PUC_PORT_2S, 0x10, 4, 0, 372 }, 373 374 { 0x131f, 0x2040, 0xffff, 0, 375 "SIIG Cyber 2P1S PCI 16C550 (20x family)", 376 DEFAULT_RCLK, 377 PUC_PORT_1S2P, 0x10, -1, 0, 378 .config_function = puc_config_siig 379 }, 380 381 { 0x131f, 0x2041, 0xffff, 0, 382 "SIIG Cyber 2P1S PCI 16C650 (20x family)", 383 DEFAULT_RCLK, 384 PUC_PORT_1S2P, 0x10, -1, 0, 385 .config_function = puc_config_siig 386 }, 387 388 { 0x131f, 0x2042, 0xffff, 0, 389 "SIIG Cyber 2P1S PCI 16C850 (20x family)", 390 DEFAULT_RCLK, 391 PUC_PORT_1S2P, 0x10, -1, 0, 392 .config_function = puc_config_siig 393 }, 394 395 { 0x131f, 0x2050, 0xffff, 0, 396 "SIIG Cyber 4S PCI 16C550 (20x family)", 397 DEFAULT_RCLK, 398 PUC_PORT_4S, 0x10, 4, 0, 399 }, 400 401 { 0x131f, 0x2051, 0xffff, 0, 402 "SIIG Cyber 4S PCI 16C650 (20x family)", 403 DEFAULT_RCLK, 404 PUC_PORT_4S, 0x10, 4, 0, 405 }, 406 407 { 0x131f, 0x2052, 0xffff, 0, 408 "SIIG Cyber 4S PCI 16C850 (20x family)", 409 DEFAULT_RCLK, 410 PUC_PORT_4S, 0x10, 4, 0, 411 }, 412 413 { 0x131f, 0x2060, 0xffff, 0, 414 "SIIG Cyber 2S1P PCI 16C550 (20x family)", 415 DEFAULT_RCLK, 416 PUC_PORT_2S1P, 0x10, 4, 0, 417 }, 418 419 { 0x131f, 0x2061, 0xffff, 0, 420 "SIIG Cyber 2S1P PCI 16C650 (20x family)", 421 DEFAULT_RCLK, 422 PUC_PORT_2S1P, 0x10, 4, 0, 423 }, 424 425 { 0x131f, 0x2062, 0xffff, 0, 426 "SIIG Cyber 2S1P PCI 16C850 (20x family)", 427 DEFAULT_RCLK, 428 PUC_PORT_2S1P, 0x10, 4, 0, 429 }, 430 431 { 0x131f, 0x2081, 0xffff, 0, 432 "SIIG PS8000 8S PCI 16C650 (20x family)", 433 DEFAULT_RCLK, 434 PUC_PORT_8S, 0x10, -1, -1, 435 .config_function = puc_config_siig 436 }, 437 438 { 0x135c, 0x0010, 0xffff, 0, 439 "Quatech QSC-100", 440 -3, /* max 8x clock rate */ 441 PUC_PORT_4S, 0x14, 0, 8, 442 .config_function = puc_config_quatech 443 }, 444 445 { 0x135c, 0x0020, 0xffff, 0, 446 "Quatech DSC-100", 447 -1, /* max 2x clock rate */ 448 PUC_PORT_2S, 0x14, 0, 8, 449 .config_function = puc_config_quatech 450 }, 451 452 { 0x135c, 0x0030, 0xffff, 0, 453 "Quatech DSC-200/300", 454 -1, /* max 2x clock rate */ 455 PUC_PORT_2S, 0x14, 0, 8, 456 .config_function = puc_config_quatech 457 }, 458 459 { 0x135c, 0x0040, 0xffff, 0, 460 "Quatech QSC-200/300", 461 -3, /* max 8x clock rate */ 462 PUC_PORT_4S, 0x14, 0, 8, 463 .config_function = puc_config_quatech 464 }, 465 466 { 0x135c, 0x0050, 0xffff, 0, 467 "Quatech ESC-100D", 468 -3, /* max 8x clock rate */ 469 PUC_PORT_8S, 0x14, 0, 8, 470 .config_function = puc_config_quatech 471 }, 472 473 { 0x135c, 0x0060, 0xffff, 0, 474 "Quatech ESC-100M", 475 -3, /* max 8x clock rate */ 476 PUC_PORT_8S, 0x14, 0, 8, 477 .config_function = puc_config_quatech 478 }, 479 480 { 0x135c, 0x0170, 0xffff, 0, 481 "Quatech QSCLP-100", 482 -1, /* max 2x clock rate */ 483 PUC_PORT_4S, 0x18, 0, 8, 484 .config_function = puc_config_quatech 485 }, 486 487 { 0x135c, 0x0180, 0xffff, 0, 488 "Quatech DSCLP-100", 489 -1, /* max 3x clock rate */ 490 PUC_PORT_2S, 0x18, 0, 8, 491 .config_function = puc_config_quatech 492 }, 493 494 { 0x135c, 0x01b0, 0xffff, 0, 495 "Quatech DSCLP-200/300", 496 -1, /* max 2x clock rate */ 497 PUC_PORT_2S, 0x18, 0, 8, 498 .config_function = puc_config_quatech 499 }, 500 501 { 0x135c, 0x01e0, 0xffff, 0, 502 "Quatech ESCLP-100", 503 -3, /* max 8x clock rate */ 504 PUC_PORT_8S, 0x10, 0, 8, 505 .config_function = puc_config_quatech 506 }, 507 508 { 0x1393, 0x1040, 0xffff, 0, 509 "Moxa Technologies, Smartio C104H/PCI", 510 DEFAULT_RCLK * 8, 511 PUC_PORT_4S, 0x18, 0, 8, 512 }, 513 514 { 0x1393, 0x1041, 0xffff, 0, 515 "Moxa Technologies, Smartio CP-104UL/PCI", 516 DEFAULT_RCLK * 8, 517 PUC_PORT_4S, 0x18, 0, 8, 518 }, 519 520 { 0x1393, 0x1043, 0xffff, 0, 521 "Moxa Technologies, Smartio CP-104EL/PCIe", 522 DEFAULT_RCLK * 8, 523 PUC_PORT_4S, 0x18, 0, 8, 524 }, 525 526 { 0x1393, 0x1141, 0xffff, 0, 527 "Moxa Technologies, Industio CP-114", 528 DEFAULT_RCLK * 8, 529 PUC_PORT_4S, 0x18, 0, 8, 530 }, 531 532 { 0x1393, 0x1680, 0xffff, 0, 533 "Moxa Technologies, C168H/PCI", 534 DEFAULT_RCLK * 8, 535 PUC_PORT_8S, 0x18, 0, 8, 536 }, 537 538 { 0x1393, 0x1681, 0xffff, 0, 539 "Moxa Technologies, C168U/PCI", 540 DEFAULT_RCLK * 8, 541 PUC_PORT_8S, 0x18, 0, 8, 542 }, 543 544 { 0x1393, 0x1682, 0xffff, 0, 545 "Moxa Technologies, CP-168EL/PCIe", 546 DEFAULT_RCLK * 8, 547 PUC_PORT_8S, 0x18, 0, 8, 548 }, 549 550 { 0x13a8, 0x0158, 0xffff, 0, 551 "Cronyx Omega2-PCI", 552 DEFAULT_RCLK * 8, 553 PUC_PORT_8S, 0x10, 0, -1, 554 .config_function = puc_config_cronyx 555 }, 556 557 { 0x1407, 0x0100, 0xffff, 0, 558 "Lava Computers Dual Serial", 559 DEFAULT_RCLK, 560 PUC_PORT_2S, 0x10, 4, 0, 561 }, 562 563 { 0x1407, 0x0101, 0xffff, 0, 564 "Lava Computers Quatro A", 565 DEFAULT_RCLK, 566 PUC_PORT_2S, 0x10, 4, 0, 567 }, 568 569 { 0x1407, 0x0102, 0xffff, 0, 570 "Lava Computers Quatro B", 571 DEFAULT_RCLK, 572 PUC_PORT_2S, 0x10, 4, 0, 573 }, 574 575 { 0x1407, 0x0120, 0xffff, 0, 576 "Lava Computers Quattro-PCI A", 577 DEFAULT_RCLK, 578 PUC_PORT_2S, 0x10, 4, 0, 579 }, 580 581 { 0x1407, 0x0121, 0xffff, 0, 582 "Lava Computers Quattro-PCI B", 583 DEFAULT_RCLK, 584 PUC_PORT_2S, 0x10, 4, 0, 585 }, 586 587 { 0x1407, 0x0180, 0xffff, 0, 588 "Lava Computers Octo A", 589 DEFAULT_RCLK, 590 PUC_PORT_4S, 0x10, 4, 0, 591 }, 592 593 { 0x1407, 0x0181, 0xffff, 0, 594 "Lava Computers Octo B", 595 DEFAULT_RCLK, 596 PUC_PORT_4S, 0x10, 4, 0, 597 }, 598 599 { 0x1409, 0x7268, 0xffff, 0, 600 "Sunix SUN1888", 601 0, 602 PUC_PORT_2P, 0x10, 0, 8, 603 }, 604 605 { 0x1409, 0x7168, 0xffff, 0, 606 NULL, 607 DEFAULT_RCLK * 8, 608 PUC_PORT_NONSTANDARD, 0x10, -1, -1, 609 .config_function = puc_config_timedia 610 }, 611 612 /* 613 * Boards with an Oxford Semiconductor chip. 614 * 615 * Oxford Semiconductor provides documentation for their chip at: 616 * <URL:http://www.oxsemi.com/products/uarts/index.html> 617 * 618 * As sold by Kouwell <URL:http://www.kouwell.com/>. 619 * I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. 620 */ 621 622 { 0x1415, 0x9501, 0x131f, 0x2050, 623 "SIIG Cyber 4 PCI 16550", 624 DEFAULT_RCLK * 10, 625 PUC_PORT_4S, 0x10, 0, 8, 626 }, 627 628 { 0x1415, 0x9501, 0x131f, 0x2051, 629 "SIIG Cyber 4S PCI 16C650 (20x family)", 630 DEFAULT_RCLK * 10, 631 PUC_PORT_4S, 0x10, 0, 8, 632 }, 633 634 { 0x1415, 0x9501, 0xffff, 0, 635 "Oxford Semiconductor OX16PCI954 UARTs", 636 DEFAULT_RCLK, 637 PUC_PORT_4S, 0x10, 0, 8, 638 }, 639 640 { 0x1415, 0x950a, 0xffff, 0, 641 "Oxford Semiconductor OX16PCI954 UARTs", 642 DEFAULT_RCLK, 643 PUC_PORT_4S, 0x10, 0, 8, 644 }, 645 646 { 0x1415, 0x9511, 0xffff, 0, 647 "Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)", 648 DEFAULT_RCLK, 649 PUC_PORT_4S, 0x10, 0, 8, 650 }, 651 652 { 0x1415, 0x9521, 0xffff, 0, 653 "Oxford Semiconductor OX16PCI952 UARTs", 654 DEFAULT_RCLK, 655 PUC_PORT_2S, 0x10, 4, 0, 656 }, 657 658 { 0x1415, 0x9538, 0xffff, 0, 659 "Oxford Semiconductor OX16PCI958 UARTs", 660 DEFAULT_RCLK * 10, 661 PUC_PORT_8S, 0x18, 0, 8, 662 }, 663 664 /* 665 * Perle boards use Oxford Semiconductor chips, but they store the 666 * Oxford Semiconductor device ID as a subvendor device ID and use 667 * their own device IDs. 668 */ 669 670 { 0x155f, 0x0331, 0xffff, 0, 671 "Perle Speed4 LE", 672 DEFAULT_RCLK * 8, 673 PUC_PORT_4S, 0x10, 0, 8, 674 }, 675 676 { 0x14d2, 0x8010, 0xffff, 0, 677 "VScom PCI-100L", 678 DEFAULT_RCLK * 8, 679 PUC_PORT_1S, 0x14, 0, 0, 680 }, 681 682 { 0x14d2, 0x8020, 0xffff, 0, 683 "VScom PCI-200L", 684 DEFAULT_RCLK * 8, 685 PUC_PORT_2S, 0x14, 4, 0, 686 }, 687 688 { 0x14d2, 0x8028, 0xffff, 0, 689 "VScom 200Li", 690 DEFAULT_RCLK, 691 PUC_PORT_2S, 0x20, 0, 8, 692 }, 693 694 /* 695 * VScom (Titan?) PCI-800L. More modern variant of the 696 * PCI-800. Uses 6 discrete 16550 UARTs, plus another 697 * two of them obviously implemented as macro cells in 698 * the ASIC. This causes the weird port access pattern 699 * below, where two of the IO port ranges each access 700 * one of the ASIC UARTs, and a block of IO addresses 701 * access the external UARTs. 702 */ 703 { 0x14d2, 0x8080, 0xffff, 0, 704 "Titan VScom PCI-800L", 705 DEFAULT_RCLK * 8, 706 PUC_PORT_8S, 0x14, -1, -1, 707 .config_function = puc_config_titan 708 }, 709 710 /* 711 * VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers 712 * 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has 713 * device ID 3 and PCI device 1 device ID 4. 714 */ 715 { 0x14d2, 0xa003, 0xffff, 0, 716 "Titan PCI-800H", 717 DEFAULT_RCLK * 8, 718 PUC_PORT_4S, 0x10, 0, 8, 719 }, 720 { 0x14d2, 0xa004, 0xffff, 0, 721 "Titan PCI-800H", 722 DEFAULT_RCLK * 8, 723 PUC_PORT_4S, 0x10, 0, 8, 724 }, 725 726 { 0x14d2, 0xa005, 0xffff, 0, 727 "Titan PCI-200H", 728 DEFAULT_RCLK * 8, 729 PUC_PORT_2S, 0x10, 0, 8, 730 }, 731 732 { 0x14d2, 0xe020, 0xffff, 0, 733 "Titan VScom PCI-200HV2", 734 DEFAULT_RCLK * 8, 735 PUC_PORT_2S, 0x10, 4, 0, 736 }, 737 738 { 0x14db, 0x2130, 0xffff, 0, 739 "Avlab Technology, PCI IO 2S", 740 DEFAULT_RCLK, 741 PUC_PORT_2S, 0x10, 4, 0, 742 }, 743 744 { 0x14db, 0x2150, 0xffff, 0, 745 "Avlab Low Profile PCI 4 Serial", 746 DEFAULT_RCLK, 747 PUC_PORT_4S, 0x10, 4, 0, 748 }, 749 750 { 0x14db, 0x2152, 0xffff, 0, 751 "Avlab Low Profile PCI 4 Serial", 752 DEFAULT_RCLK, 753 PUC_PORT_4S, 0x10, 4, 0, 754 }, 755 756 { 0x1592, 0x0781, 0xffff, 0, 757 "Syba Tech Ltd. PCI-4S2P-550-ECP", 758 DEFAULT_RCLK, 759 PUC_PORT_4S1P, 0x10, 0, -1, 760 .config_function = puc_config_syba 761 }, 762 763 { 0x6666, 0x0001, 0xffff, 0, 764 "Decision Computer Inc, PCCOM 4-port serial", 765 DEFAULT_RCLK, 766 PUC_PORT_4S, 0x1c, 0, 8, 767 }, 768 769 { 0x6666, 0x0002, 0xffff, 0, 770 "Decision Computer Inc, PCCOM 8-port serial", 771 DEFAULT_RCLK, 772 PUC_PORT_8S, 0x1c, 0, 8, 773 }, 774 775 { 0x6666, 0x0004, 0xffff, 0, 776 "PCCOM dual port RS232/422/485", 777 DEFAULT_RCLK, 778 PUC_PORT_2S, 0x1c, 0, 8, 779 }, 780 781 { 0x9710, 0x9815, 0xffff, 0, 782 "NetMos NM9815 Dual 1284 Printer port", 783 0, 784 PUC_PORT_2P, 0x10, 8, 0, 785 }, 786 787 /* 788 * This is more specific than the generic NM9835 entry that follows, and 789 * is placed here to _prevent_ puc from claiming this single port card. 790 * 791 * uart(4) will claim this device. 792 */ 793 { 0x9710, 0x9835, 0x1000, 1, 794 "NetMos NM9835 based 1-port serial", 795 DEFAULT_RCLK, 796 PUC_PORT_1S, 0x10, 4, 0, 797 }, 798 799 { 0x9710, 0x9835, 0x1000, 2, 800 "NetMos NM9835 based 2-port serial", 801 DEFAULT_RCLK, 802 PUC_PORT_2S, 0x10, 4, 0, 803 }, 804 805 { 0x9710, 0x9835, 0xffff, 0, 806 "NetMos NM9835 Dual UART and 1284 Printer port", 807 DEFAULT_RCLK, 808 PUC_PORT_2S1P, 0x10, 4, 0, 809 }, 810 811 { 0x9710, 0x9845, 0x1000, 0x0006, 812 "NetMos NM9845 6 Port UART", 813 DEFAULT_RCLK, 814 PUC_PORT_6S, 0x10, 4, 0, 815 }, 816 817 { 0x9710, 0x9845, 0xffff, 0, 818 "NetMos NM9845 Quad UART and 1284 Printer port", 819 DEFAULT_RCLK, 820 PUC_PORT_4S1P, 0x10, 4, 0, 821 }, 822 823 { 0x9710, 0x9865, 0xa000, 0x3002, 824 "NetMos NM9865 Dual UART", 825 DEFAULT_RCLK, 826 PUC_PORT_2S, 0x10, 4, 0, 827 }, 828 829 { 0x9710, 0x9865, 0xa000, 0x3003, 830 "NetMos NM9865 Triple UART", 831 DEFAULT_RCLK, 832 PUC_PORT_3S, 0x10, 4, 0, 833 }, 834 835 { 0x9710, 0x9865, 0xa000, 0x3004, 836 "NetMos NM9865 Quad UART", 837 DEFAULT_RCLK, 838 PUC_PORT_4S, 0x10, 4, 0,0 839 }, 840 841 { 0x9710, 0x9865, 0xa000, 0x3011, 842 "NetMos NM9865 Single UART and 1284 Printer port", 843 DEFAULT_RCLK, 844 PUC_PORT_1S1P, 0x10, 4, 0, 845 }, 846 847 { 0x9710, 0x9865, 0xa000, 0x3012, 848 "NetMos NM9865 Dual UART and 1284 Printer port", 849 DEFAULT_RCLK, 850 PUC_PORT_2S1P, 0x10, 4, 0, 851 }, 852 853 { 0x9710, 0x9865, 0xa000, 0x3020, 854 "NetMos NM9865 Dual 1284 Printer port", 855 DEFAULT_RCLK, 856 PUC_PORT_2P, 0x10, 4, 0, 857 }, 858 859 { 0xb00c, 0x021c, 0xffff, 0, 860 "IC Book Labs Gunboat x4 Lite", 861 DEFAULT_RCLK, 862 PUC_PORT_4S, 0x10, 0, 8, 863 .config_function = puc_config_icbook 864 }, 865 866 { 0xb00c, 0x031c, 0xffff, 0, 867 "IC Book Labs Gunboat x4 Pro", 868 DEFAULT_RCLK, 869 PUC_PORT_4S, 0x10, 0, 8, 870 .config_function = puc_config_icbook 871 }, 872 873 { 0xb00c, 0x041c, 0xffff, 0, 874 "IC Book Labs Ironclad x8 Lite", 875 DEFAULT_RCLK, 876 PUC_PORT_8S, 0x10, 0, 8, 877 .config_function = puc_config_icbook 878 }, 879 880 { 0xb00c, 0x051c, 0xffff, 0, 881 "IC Book Labs Ironclad x8 Pro", 882 DEFAULT_RCLK, 883 PUC_PORT_8S, 0x10, 0, 8, 884 .config_function = puc_config_icbook 885 }, 886 887 { 0xb00c, 0x081c, 0xffff, 0, 888 "IC Book Labs Dreadnought x16 Pro", 889 DEFAULT_RCLK * 8, 890 PUC_PORT_16S, 0x10, 0, 8, 891 .config_function = puc_config_icbook 892 }, 893 894 { 0xb00c, 0x091c, 0xffff, 0, 895 "IC Book Labs Dreadnought x16 Lite", 896 DEFAULT_RCLK, 897 PUC_PORT_16S, 0x10, 0, 8, 898 .config_function = puc_config_icbook 899 }, 900 901 { 0xb00c, 0x0a1c, 0xffff, 0, 902 "IC Book Labs Gunboat x2 Low Profile", 903 DEFAULT_RCLK, 904 PUC_PORT_2S, 0x10, 0, 8, 905 }, 906 907 { 0xb00c, 0x0b1c, 0xffff, 0, 908 "IC Book Labs Gunboat x4 Low Profile", 909 DEFAULT_RCLK, 910 PUC_PORT_4S, 0x10, 0, 8, 911 .config_function = puc_config_icbook 912 }, 913 914 { 0xffff, 0, 0xffff, 0, NULL, 0 } 915 }; 916 917 static int 918 puc_config_amc(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 919 intptr_t *res) 920 { 921 switch (cmd) { 922 case PUC_CFG_GET_OFS: 923 *res = 8 * (port & 1); 924 return (0); 925 case PUC_CFG_GET_RID: 926 *res = 0x14 + (port >> 1) * 4; 927 return (0); 928 default: 929 break; 930 } 931 return (ENXIO); 932 } 933 934 static int 935 puc_config_cronyx(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 936 intptr_t *res) 937 { 938 if (cmd == PUC_CFG_GET_OFS) { 939 *res = port * 0x200; 940 return (0); 941 } 942 return (ENXIO); 943 } 944 945 static int 946 puc_config_diva(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 947 intptr_t *res) 948 { 949 const struct puc_cfg *cfg = sc->sc_cfg; 950 951 if (cmd == PUC_CFG_GET_OFS) { 952 if (cfg->subdevice == 0x1282) /* Everest SP */ 953 port <<= 1; 954 else if (cfg->subdevice == 0x104b) /* Maestro SP2 */ 955 port = (port == 3) ? 4 : port; 956 *res = port * 8 + ((port > 2) ? 0x18 : 0); 957 return (0); 958 } 959 return (ENXIO); 960 } 961 962 static int 963 puc_config_icbook(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 964 intptr_t *res) 965 { 966 if (cmd == PUC_CFG_GET_ILR) { 967 *res = PUC_ILR_DIGI; 968 return (0); 969 } 970 return (ENXIO); 971 } 972 973 static int 974 puc_config_quatech(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 975 intptr_t *res) 976 { 977 const struct puc_cfg *cfg = sc->sc_cfg; 978 struct puc_bar *bar; 979 uint8_t v0, v1; 980 981 switch (cmd) { 982 case PUC_CFG_SETUP: 983 /* 984 * Check if the scratchpad register is enabled or if the 985 * interrupt status and options registers are active. 986 */ 987 bar = puc_get_bar(sc, cfg->rid); 988 if (bar == NULL) 989 return (ENXIO); 990 /* Set DLAB in the LCR register of UART 0. */ 991 bus_write_1(bar->b_res, 3, 0x80); 992 /* Write 0 to the SPR register of UART 0. */ 993 bus_write_1(bar->b_res, 7, 0); 994 /* Read back the contents of the SPR register of UART 0. */ 995 v0 = bus_read_1(bar->b_res, 7); 996 /* Write a specific value to the SPR register of UART 0. */ 997 bus_write_1(bar->b_res, 7, 0x80 + -cfg->clock); 998 /* Read back the contents of the SPR register of UART 0. */ 999 v1 = bus_read_1(bar->b_res, 7); 1000 /* Clear DLAB in the LCR register of UART 0. */ 1001 bus_write_1(bar->b_res, 3, 0); 1002 /* Save the two values read-back from the SPR register. */ 1003 sc->sc_cfg_data = (v0 << 8) | v1; 1004 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1005 /* 1006 * The SPR register echoed the two values written 1007 * by us. This means that the SPAD jumper is set. 1008 */ 1009 device_printf(sc->sc_dev, "warning: extra features " 1010 "not usable -- SPAD compatibility enabled\n"); 1011 return (0); 1012 } 1013 if (v0 != 0) { 1014 /* 1015 * The first value doesn't match. This can only mean 1016 * that the SPAD jumper is not set and that a non- 1017 * standard fixed clock multiplier jumper is set. 1018 */ 1019 if (bootverbose) 1020 device_printf(sc->sc_dev, "fixed clock rate " 1021 "multiplier of %d\n", 1 << v0); 1022 if (v0 < -cfg->clock) 1023 device_printf(sc->sc_dev, "warning: " 1024 "suboptimal fixed clock rate multiplier " 1025 "setting\n"); 1026 return (0); 1027 } 1028 /* 1029 * The first value matched, but the second didn't. We know 1030 * that the SPAD jumper is not set. We also know that the 1031 * clock rate multiplier is software controlled *and* that 1032 * we just programmed it to the maximum allowed. 1033 */ 1034 if (bootverbose) 1035 device_printf(sc->sc_dev, "clock rate multiplier of " 1036 "%d selected\n", 1 << -cfg->clock); 1037 return (0); 1038 case PUC_CFG_GET_CLOCK: 1039 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1040 v1 = sc->sc_cfg_data & 0xff; 1041 if (v0 == 0 && v1 == 0x80 + -cfg->clock) { 1042 /* 1043 * XXX With the SPAD jumper applied, there's no 1044 * easy way of knowing if there's also a clock 1045 * rate multiplier jumper installed. Let's hope 1046 * not... 1047 */ 1048 *res = DEFAULT_RCLK; 1049 } else if (v0 == 0) { 1050 /* 1051 * No clock rate multiplier jumper installed, 1052 * so we programmed the board with the maximum 1053 * multiplier allowed as given to us in the 1054 * clock field of the config record (negated). 1055 */ 1056 *res = DEFAULT_RCLK << -cfg->clock; 1057 } else 1058 *res = DEFAULT_RCLK << v0; 1059 return (0); 1060 case PUC_CFG_GET_ILR: 1061 v0 = (sc->sc_cfg_data >> 8) & 0xff; 1062 v1 = sc->sc_cfg_data & 0xff; 1063 *res = (v0 == 0 && v1 == 0x80 + -cfg->clock) 1064 ? PUC_ILR_NONE : PUC_ILR_QUATECH; 1065 return (0); 1066 default: 1067 break; 1068 } 1069 return (ENXIO); 1070 } 1071 1072 static int 1073 puc_config_syba(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1074 intptr_t *res) 1075 { 1076 static int base[] = { 0x251, 0x3f0, 0 }; 1077 const struct puc_cfg *cfg = sc->sc_cfg; 1078 struct puc_bar *bar; 1079 int efir, idx, ofs; 1080 uint8_t v; 1081 1082 switch (cmd) { 1083 case PUC_CFG_SETUP: 1084 bar = puc_get_bar(sc, cfg->rid); 1085 if (bar == NULL) 1086 return (ENXIO); 1087 1088 /* configure both W83877TFs */ 1089 bus_write_1(bar->b_res, 0x250, 0x89); 1090 bus_write_1(bar->b_res, 0x3f0, 0x87); 1091 bus_write_1(bar->b_res, 0x3f0, 0x87); 1092 idx = 0; 1093 while (base[idx] != 0) { 1094 efir = base[idx]; 1095 bus_write_1(bar->b_res, efir, 0x09); 1096 v = bus_read_1(bar->b_res, efir + 1); 1097 if ((v & 0x0f) != 0x0c) 1098 return (ENXIO); 1099 bus_write_1(bar->b_res, efir, 0x16); 1100 v = bus_read_1(bar->b_res, efir + 1); 1101 bus_write_1(bar->b_res, efir, 0x16); 1102 bus_write_1(bar->b_res, efir + 1, v | 0x04); 1103 bus_write_1(bar->b_res, efir, 0x16); 1104 bus_write_1(bar->b_res, efir + 1, v & ~0x04); 1105 ofs = base[idx] & 0x300; 1106 bus_write_1(bar->b_res, efir, 0x23); 1107 bus_write_1(bar->b_res, efir + 1, (ofs + 0x78) >> 2); 1108 bus_write_1(bar->b_res, efir, 0x24); 1109 bus_write_1(bar->b_res, efir + 1, (ofs + 0xf8) >> 2); 1110 bus_write_1(bar->b_res, efir, 0x25); 1111 bus_write_1(bar->b_res, efir + 1, (ofs + 0xe8) >> 2); 1112 bus_write_1(bar->b_res, efir, 0x17); 1113 bus_write_1(bar->b_res, efir + 1, 0x03); 1114 bus_write_1(bar->b_res, efir, 0x28); 1115 bus_write_1(bar->b_res, efir + 1, 0x43); 1116 idx++; 1117 } 1118 bus_write_1(bar->b_res, 0x250, 0xaa); 1119 bus_write_1(bar->b_res, 0x3f0, 0xaa); 1120 return (0); 1121 case PUC_CFG_GET_OFS: 1122 switch (port) { 1123 case 0: 1124 *res = 0x2f8; 1125 return (0); 1126 case 1: 1127 *res = 0x2e8; 1128 return (0); 1129 case 2: 1130 *res = 0x3f8; 1131 return (0); 1132 case 3: 1133 *res = 0x3e8; 1134 return (0); 1135 case 4: 1136 *res = 0x278; 1137 return (0); 1138 } 1139 break; 1140 default: 1141 break; 1142 } 1143 return (ENXIO); 1144 } 1145 1146 static int 1147 puc_config_siig(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1148 intptr_t *res) 1149 { 1150 const struct puc_cfg *cfg = sc->sc_cfg; 1151 1152 switch (cmd) { 1153 case PUC_CFG_GET_OFS: 1154 if (cfg->ports == PUC_PORT_8S) { 1155 *res = (port > 4) ? 8 * (port - 4) : 0; 1156 return (0); 1157 } 1158 break; 1159 case PUC_CFG_GET_RID: 1160 if (cfg->ports == PUC_PORT_8S) { 1161 *res = 0x10 + ((port > 4) ? 0x10 : 4 * port); 1162 return (0); 1163 } 1164 if (cfg->ports == PUC_PORT_2S1P) { 1165 switch (port) { 1166 case 0: *res = 0x10; return (0); 1167 case 1: *res = 0x14; return (0); 1168 case 2: *res = 0x1c; return (0); 1169 } 1170 } 1171 break; 1172 default: 1173 break; 1174 } 1175 return (ENXIO); 1176 } 1177 1178 static int 1179 puc_config_timedia(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1180 intptr_t *res) 1181 { 1182 static uint16_t dual[] = { 1183 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 1184 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 1185 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 1186 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 1187 0xD079, 0 1188 }; 1189 static uint16_t quad[] = { 1190 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 1191 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 1192 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 1193 0xB157, 0 1194 }; 1195 static uint16_t octa[] = { 1196 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 1197 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 1198 }; 1199 static struct { 1200 int ports; 1201 uint16_t *ids; 1202 } subdevs[] = { 1203 { 2, dual }, 1204 { 4, quad }, 1205 { 8, octa }, 1206 { 0, NULL } 1207 }; 1208 static char desc[64]; 1209 int dev, id; 1210 uint16_t subdev; 1211 1212 switch (cmd) { 1213 case PUC_CFG_GET_DESC: 1214 snprintf(desc, sizeof(desc), 1215 "Timedia technology %d Port Serial", (int)sc->sc_cfg_data); 1216 *res = (intptr_t)desc; 1217 return (0); 1218 case PUC_CFG_GET_NPORTS: 1219 subdev = pci_get_subdevice(sc->sc_dev); 1220 dev = 0; 1221 while (subdevs[dev].ports != 0) { 1222 id = 0; 1223 while (subdevs[dev].ids[id] != 0) { 1224 if (subdev == subdevs[dev].ids[id]) { 1225 sc->sc_cfg_data = subdevs[dev].ports; 1226 *res = sc->sc_cfg_data; 1227 return (0); 1228 } 1229 id++; 1230 } 1231 dev++; 1232 } 1233 return (ENXIO); 1234 case PUC_CFG_GET_OFS: 1235 *res = (port == 1 || port == 3) ? 8 : 0; 1236 return (0); 1237 case PUC_CFG_GET_RID: 1238 *res = 0x10 + ((port > 3) ? port - 2 : port >> 1) * 4; 1239 return (0); 1240 case PUC_CFG_GET_TYPE: 1241 *res = PUC_TYPE_SERIAL; 1242 return (0); 1243 default: 1244 break; 1245 } 1246 return (ENXIO); 1247 } 1248 1249 static int 1250 puc_config_titan(struct puc_softc *sc, enum puc_cfg_cmd cmd, int port, 1251 intptr_t *res) 1252 { 1253 switch (cmd) { 1254 case PUC_CFG_GET_OFS: 1255 *res = (port < 3) ? 0 : (port - 2) << 3; 1256 return (0); 1257 case PUC_CFG_GET_RID: 1258 *res = 0x14 + ((port >= 2) ? 0x0c : port << 2); 1259 return (0); 1260 default: 1261 break; 1262 } 1263 return (ENXIO); 1264 } 1265