1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1997-2000 Nicolas Souchu 5 * Copyright (c) 2001 Alcove - Nicolas Souchu 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 #include "opt_ppc.h" 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/bus.h> 38 #include <sys/kernel.h> 39 #include <sys/lock.h> 40 #include <sys/interrupt.h> 41 #include <sys/module.h> 42 #include <sys/malloc.h> 43 #include <sys/mutex.h> 44 #include <sys/proc.h> 45 46 #include <machine/bus.h> 47 #include <machine/resource.h> 48 #include <sys/rman.h> 49 50 #ifdef __i386__ 51 #include <vm/vm.h> 52 #include <vm/pmap.h> 53 #include <machine/vmparam.h> 54 #include <machine/pc/bios.h> 55 #endif 56 57 #include <dev/ppbus/ppbconf.h> 58 #include <dev/ppbus/ppb_msq.h> 59 60 #include <dev/ppc/ppcvar.h> 61 #include <dev/ppc/ppcreg.h> 62 63 #include "ppbus_if.h" 64 65 static void ppcintr(void *arg); 66 67 #define IO_LPTSIZE_EXTENDED 8 /* "Extended" LPT controllers */ 68 #define IO_LPTSIZE_NORMAL 4 /* "Normal" LPT controllers */ 69 70 #define LOG_PPC(function, ppc, string) \ 71 if (bootverbose) printf("%s: %s\n", function, string) 72 73 #define DEVTOSOFTC(dev) ((struct ppc_data *)device_get_softc(dev)) 74 75 /* 76 * We use critical enter/exit for the simple config locking needed to 77 * detect the devices. We just want to make sure that both of our writes 78 * happen without someone else also writing to those config registers. Since 79 * we just do this at startup, Giant keeps multiple threads from executing, 80 * and critical_enter() then is all that's needed to keep us from being preempted 81 * during the critical sequences with the hardware. 82 * 83 * Note: this doesn't prevent multiple threads from putting the chips into 84 * config mode, but since we only do that to detect the type at startup the 85 * extra overhead isn't needed since Giant protects us from multiple entry 86 * and no other code changes these registers. 87 */ 88 #define PPC_CONFIG_LOCK(ppc) critical_enter() 89 #define PPC_CONFIG_UNLOCK(ppc) critical_exit() 90 91 const char ppc_driver_name[] = "ppc"; 92 93 static char *ppc_models[] = { 94 "SMC-like", "SMC FDC37C665GT", "SMC FDC37C666GT", "PC87332", "PC87306", 95 "82091AA", "Generic", "W83877F", "W83877AF", "Winbond", "PC87334", 96 "SMC FDC37C935", "PC87303", 0 97 }; 98 99 /* list of available modes */ 100 static char *ppc_avms[] = { 101 "COMPATIBLE", "NIBBLE-only", "PS2-only", "PS2/NIBBLE", "EPP-only", 102 "EPP/NIBBLE", "EPP/PS2", "EPP/PS2/NIBBLE", "ECP-only", 103 "ECP/NIBBLE", "ECP/PS2", "ECP/PS2/NIBBLE", "ECP/EPP", 104 "ECP/EPP/NIBBLE", "ECP/EPP/PS2", "ECP/EPP/PS2/NIBBLE", 0 105 }; 106 107 /* list of current executing modes 108 * Note that few modes do not actually exist. 109 */ 110 static char *ppc_modes[] = { 111 "COMPATIBLE", "NIBBLE", "PS/2", "PS/2", "EPP", 112 "EPP", "EPP", "EPP", "ECP", 113 "ECP", "ECP+PS2", "ECP+PS2", "ECP+EPP", 114 "ECP+EPP", "ECP+EPP", "ECP+EPP", 0 115 }; 116 117 static char *ppc_epp_protocol[] = { " (EPP 1.9)", " (EPP 1.7)", 0 }; 118 119 #ifdef __i386__ 120 /* 121 * BIOS printer list - used by BIOS probe. 122 */ 123 #define BIOS_PPC_PORTS 0x408 124 #define BIOS_PORTS ((short *)BIOS_PADDRTOVADDR(BIOS_PPC_PORTS)) 125 #define BIOS_MAX_PPC 4 126 #endif 127 128 /* 129 * ppc_ecp_sync() XXX 130 */ 131 int 132 ppc_ecp_sync(device_t dev) 133 { 134 int i, r; 135 struct ppc_data *ppc = DEVTOSOFTC(dev); 136 137 PPC_ASSERT_LOCKED(ppc); 138 if (!(ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_dtm & PPB_ECP)) 139 return 0; 140 141 r = r_ecr(ppc); 142 if ((r & 0xe0) != PPC_ECR_EPP) 143 return 0; 144 145 for (i = 0; i < 100; i++) { 146 r = r_ecr(ppc); 147 if (r & 0x1) 148 return 0; 149 DELAY(100); 150 } 151 152 device_printf(dev, "ECP sync failed as data still present in FIFO.\n"); 153 154 return 0; 155 } 156 157 /* 158 * ppc_detect_fifo() 159 * 160 * Detect parallel port FIFO 161 */ 162 static int 163 ppc_detect_fifo(struct ppc_data *ppc) 164 { 165 char ecr_sav; 166 char ctr_sav, ctr; 167 short i; 168 169 /* save registers */ 170 ecr_sav = r_ecr(ppc); 171 ctr_sav = r_ctr(ppc); 172 173 /* enter ECP configuration mode, no interrupt, no DMA */ 174 w_ecr(ppc, 0xf4); 175 176 /* read PWord size - transfers in FIFO mode must be PWord aligned */ 177 ppc->ppc_pword = (r_cnfgA(ppc) & PPC_PWORD_MASK); 178 179 /* XXX 16 and 32 bits implementations not supported */ 180 if (ppc->ppc_pword != PPC_PWORD_8) { 181 LOG_PPC(__func__, ppc, "PWord not supported"); 182 goto error; 183 } 184 185 w_ecr(ppc, 0x34); /* byte mode, no interrupt, no DMA */ 186 ctr = r_ctr(ppc); 187 w_ctr(ppc, ctr | PCD); /* set direction to 1 */ 188 189 /* enter ECP test mode, no interrupt, no DMA */ 190 w_ecr(ppc, 0xd4); 191 192 /* flush the FIFO */ 193 for (i=0; i<1024; i++) { 194 if (r_ecr(ppc) & PPC_FIFO_EMPTY) 195 break; 196 r_fifo(ppc); 197 } 198 199 if (i >= 1024) { 200 LOG_PPC(__func__, ppc, "can't flush FIFO"); 201 goto error; 202 } 203 204 /* enable interrupts, no DMA */ 205 w_ecr(ppc, 0xd0); 206 207 /* determine readIntrThreshold 208 * fill the FIFO until serviceIntr is set 209 */ 210 for (i=0; i<1024; i++) { 211 w_fifo(ppc, (char)i); 212 if (!ppc->ppc_rthr && (r_ecr(ppc) & PPC_SERVICE_INTR)) { 213 /* readThreshold reached */ 214 ppc->ppc_rthr = i+1; 215 } 216 if (r_ecr(ppc) & PPC_FIFO_FULL) { 217 ppc->ppc_fifo = i+1; 218 break; 219 } 220 } 221 222 if (i >= 1024) { 223 LOG_PPC(__func__, ppc, "can't fill FIFO"); 224 goto error; 225 } 226 227 w_ecr(ppc, 0xd4); /* test mode, no interrupt, no DMA */ 228 w_ctr(ppc, ctr & ~PCD); /* set direction to 0 */ 229 w_ecr(ppc, 0xd0); /* enable interrupts */ 230 231 /* determine writeIntrThreshold 232 * empty the FIFO until serviceIntr is set 233 */ 234 for (i=ppc->ppc_fifo; i>0; i--) { 235 if (r_fifo(ppc) != (char)(ppc->ppc_fifo-i)) { 236 LOG_PPC(__func__, ppc, "invalid data in FIFO"); 237 goto error; 238 } 239 if (r_ecr(ppc) & PPC_SERVICE_INTR) { 240 /* writeIntrThreshold reached */ 241 ppc->ppc_wthr = ppc->ppc_fifo - i+1; 242 } 243 /* if FIFO empty before the last byte, error */ 244 if (i>1 && (r_ecr(ppc) & PPC_FIFO_EMPTY)) { 245 LOG_PPC(__func__, ppc, "data lost in FIFO"); 246 goto error; 247 } 248 } 249 250 /* FIFO must be empty after the last byte */ 251 if (!(r_ecr(ppc) & PPC_FIFO_EMPTY)) { 252 LOG_PPC(__func__, ppc, "can't empty the FIFO"); 253 goto error; 254 } 255 256 w_ctr(ppc, ctr_sav); 257 w_ecr(ppc, ecr_sav); 258 259 return (0); 260 261 error: 262 w_ctr(ppc, ctr_sav); 263 w_ecr(ppc, ecr_sav); 264 265 return (EINVAL); 266 } 267 268 static int 269 ppc_detect_port(struct ppc_data *ppc) 270 { 271 272 w_ctr(ppc, 0x0c); /* To avoid missing PS2 ports */ 273 w_dtr(ppc, 0xaa); 274 if (r_dtr(ppc) != 0xaa) 275 return (0); 276 277 return (1); 278 } 279 280 /* 281 * EPP timeout, according to the PC87332 manual 282 * Semantics of clearing EPP timeout bit. 283 * PC87332 - reading SPP_STR does it... 284 * SMC - write 1 to EPP timeout bit XXX 285 * Others - (?) write 0 to EPP timeout bit 286 */ 287 static void 288 ppc_reset_epp_timeout(struct ppc_data *ppc) 289 { 290 char r; 291 292 r = r_str(ppc); 293 w_str(ppc, r | 0x1); 294 w_str(ppc, r & 0xfe); 295 296 return; 297 } 298 299 static int 300 ppc_check_epp_timeout(struct ppc_data *ppc) 301 { 302 ppc_reset_epp_timeout(ppc); 303 304 return (!(r_str(ppc) & TIMEOUT)); 305 } 306 307 /* 308 * Configure current operating mode 309 */ 310 static int 311 ppc_generic_setmode(struct ppc_data *ppc, int mode) 312 { 313 u_char ecr = 0; 314 315 /* check if mode is available */ 316 if (mode && !(ppc->ppc_avm & mode)) 317 return (EINVAL); 318 319 /* if ECP mode, configure ecr register */ 320 if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { 321 /* return to byte mode (keeping direction bit), 322 * no interrupt, no DMA to be able to change to 323 * ECP 324 */ 325 w_ecr(ppc, PPC_ECR_RESET); 326 ecr = PPC_DISABLE_INTR; 327 328 if (mode & PPB_EPP) 329 return (EINVAL); 330 else if (mode & PPB_ECP) 331 /* select ECP mode */ 332 ecr |= PPC_ECR_ECP; 333 else if (mode & PPB_PS2) 334 /* select PS2 mode with ECP */ 335 ecr |= PPC_ECR_PS2; 336 else 337 /* select COMPATIBLE/NIBBLE mode */ 338 ecr |= PPC_ECR_STD; 339 340 w_ecr(ppc, ecr); 341 } 342 343 ppc->ppc_mode = mode; 344 345 return (0); 346 } 347 348 /* 349 * The ppc driver is free to choose options like FIFO or DMA 350 * if ECP mode is available. 351 * 352 * The 'RAW' option allows the upper drivers to force the ppc mode 353 * even with FIFO, DMA available. 354 */ 355 static int 356 ppc_smclike_setmode(struct ppc_data *ppc, int mode) 357 { 358 u_char ecr = 0; 359 360 /* check if mode is available */ 361 if (mode && !(ppc->ppc_avm & mode)) 362 return (EINVAL); 363 364 /* if ECP mode, configure ecr register */ 365 if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { 366 /* return to byte mode (keeping direction bit), 367 * no interrupt, no DMA to be able to change to 368 * ECP or EPP mode 369 */ 370 w_ecr(ppc, PPC_ECR_RESET); 371 ecr = PPC_DISABLE_INTR; 372 373 if (mode & PPB_EPP) 374 /* select EPP mode */ 375 ecr |= PPC_ECR_EPP; 376 else if (mode & PPB_ECP) 377 /* select ECP mode */ 378 ecr |= PPC_ECR_ECP; 379 else if (mode & PPB_PS2) 380 /* select PS2 mode with ECP */ 381 ecr |= PPC_ECR_PS2; 382 else 383 /* select COMPATIBLE/NIBBLE mode */ 384 ecr |= PPC_ECR_STD; 385 386 w_ecr(ppc, ecr); 387 } 388 389 ppc->ppc_mode = mode; 390 391 return (0); 392 } 393 394 #ifdef PPC_PROBE_CHIPSET 395 /* 396 * ppc_pc873xx_detect 397 * 398 * Probe for a Natsemi PC873xx-family part. 399 * 400 * References in this function are to the National Semiconductor 401 * PC87332 datasheet TL/C/11930, May 1995 revision. 402 */ 403 static int pc873xx_basetab[] = {0x0398, 0x026e, 0x015c, 0x002e, 0}; 404 static int pc873xx_porttab[] = {0x0378, 0x03bc, 0x0278, 0}; 405 static int pc873xx_irqtab[] = {5, 7, 5, 0}; 406 407 static int pc873xx_regstab[] = { 408 PC873_FER, PC873_FAR, PC873_PTR, 409 PC873_FCR, PC873_PCR, PC873_PMC, 410 PC873_TUP, PC873_SID, PC873_PNP0, 411 PC873_PNP1, PC873_LPTBA, -1 412 }; 413 414 static char *pc873xx_rnametab[] = { 415 "FER", "FAR", "PTR", "FCR", "PCR", 416 "PMC", "TUP", "SID", "PNP0", "PNP1", 417 "LPTBA", NULL 418 }; 419 420 static int 421 ppc_pc873xx_detect(struct ppc_data *ppc, int chipset_mode) /* XXX mode never forced */ 422 { 423 static int index = 0; 424 int idport, irq; 425 int ptr, pcr, val, i; 426 427 while ((idport = pc873xx_basetab[index++])) { 428 /* XXX should check first to see if this location is already claimed */ 429 430 /* 431 * Pull the 873xx through the power-on ID cycle (2.2,1.). 432 * We can't use this to locate the chip as it may already have 433 * been used by the BIOS. 434 */ 435 (void)inb(idport); (void)inb(idport); 436 (void)inb(idport); (void)inb(idport); 437 438 /* 439 * Read the SID byte. Possible values are : 440 * 441 * 01010xxx PC87334 442 * 0001xxxx PC87332 443 * 01110xxx PC87306 444 * 00110xxx PC87303 445 */ 446 outb(idport, PC873_SID); 447 val = inb(idport + 1); 448 if ((val & 0xf0) == 0x10) { 449 ppc->ppc_model = NS_PC87332; 450 } else if ((val & 0xf8) == 0x70) { 451 ppc->ppc_model = NS_PC87306; 452 } else if ((val & 0xf8) == 0x50) { 453 ppc->ppc_model = NS_PC87334; 454 } else if ((val & 0xf8) == 0x40) { /* Should be 0x30 by the 455 documentation, but probing 456 yielded 0x40... */ 457 ppc->ppc_model = NS_PC87303; 458 } else { 459 if (bootverbose && (val != 0xff)) 460 printf("PC873xx probe at 0x%x got unknown ID 0x%x\n", idport, val); 461 continue ; /* not recognised */ 462 } 463 464 /* print registers */ 465 if (bootverbose) { 466 printf("PC873xx"); 467 for (i=0; pc873xx_regstab[i] != -1; i++) { 468 outb(idport, pc873xx_regstab[i]); 469 printf(" %s=0x%x", pc873xx_rnametab[i], 470 inb(idport + 1) & 0xff); 471 } 472 printf("\n"); 473 } 474 475 /* 476 * We think we have one. Is it enabled and where we want it to be? 477 */ 478 outb(idport, PC873_FER); 479 val = inb(idport + 1); 480 if (!(val & PC873_PPENABLE)) { 481 if (bootverbose) 482 printf("PC873xx parallel port disabled\n"); 483 continue; 484 } 485 outb(idport, PC873_FAR); 486 val = inb(idport + 1); 487 /* XXX we should create a driver instance for every port found */ 488 if (pc873xx_porttab[val & 0x3] != ppc->ppc_base) { 489 /* First try to change the port address to that requested... */ 490 491 switch (ppc->ppc_base) { 492 case 0x378: 493 val &= 0xfc; 494 break; 495 496 case 0x3bc: 497 val &= 0xfd; 498 break; 499 500 case 0x278: 501 val &= 0xfe; 502 break; 503 504 default: 505 val &= 0xfd; 506 break; 507 } 508 509 outb(idport, PC873_FAR); 510 outb(idport + 1, val); 511 outb(idport + 1, val); 512 513 /* Check for success by reading back the value we supposedly 514 wrote and comparing...*/ 515 516 outb(idport, PC873_FAR); 517 val = inb(idport + 1) & 0x3; 518 519 /* If we fail, report the failure... */ 520 521 if (pc873xx_porttab[val] != ppc->ppc_base) { 522 if (bootverbose) 523 printf("PC873xx at 0x%x not for driver at port 0x%x\n", 524 pc873xx_porttab[val], ppc->ppc_base); 525 } 526 continue; 527 } 528 529 outb(idport, PC873_PTR); 530 ptr = inb(idport + 1); 531 532 /* get irq settings */ 533 if (ppc->ppc_base == 0x378) 534 irq = (ptr & PC873_LPTBIRQ7) ? 7 : 5; 535 else 536 irq = pc873xx_irqtab[val]; 537 538 if (bootverbose) 539 printf("PC873xx irq %d at 0x%x\n", irq, ppc->ppc_base); 540 541 /* 542 * Check if irq settings are correct 543 */ 544 if (irq != ppc->ppc_irq) { 545 /* 546 * If the chipset is not locked and base address is 0x378, 547 * we have another chance 548 */ 549 if (ppc->ppc_base == 0x378 && !(ptr & PC873_CFGLOCK)) { 550 if (ppc->ppc_irq == 7) { 551 outb(idport + 1, (ptr | PC873_LPTBIRQ7)); 552 outb(idport + 1, (ptr | PC873_LPTBIRQ7)); 553 } else { 554 outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); 555 outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); 556 } 557 if (bootverbose) 558 printf("PC873xx irq set to %d\n", ppc->ppc_irq); 559 } else { 560 if (bootverbose) 561 printf("PC873xx sorry, can't change irq setting\n"); 562 } 563 } else { 564 if (bootverbose) 565 printf("PC873xx irq settings are correct\n"); 566 } 567 568 outb(idport, PC873_PCR); 569 pcr = inb(idport + 1); 570 571 if ((ptr & PC873_CFGLOCK) || !chipset_mode) { 572 if (bootverbose) 573 printf("PC873xx %s", (ptr & PC873_CFGLOCK)?"locked":"unlocked"); 574 575 ppc->ppc_avm |= PPB_NIBBLE; 576 if (bootverbose) 577 printf(", NIBBLE"); 578 579 if (pcr & PC873_EPPEN) { 580 ppc->ppc_avm |= PPB_EPP; 581 582 if (bootverbose) 583 printf(", EPP"); 584 585 if (pcr & PC873_EPP19) 586 ppc->ppc_epp = EPP_1_9; 587 else 588 ppc->ppc_epp = EPP_1_7; 589 590 if ((ppc->ppc_model == NS_PC87332) && bootverbose) { 591 outb(idport, PC873_PTR); 592 ptr = inb(idport + 1); 593 if (ptr & PC873_EPPRDIR) 594 printf(", Regular mode"); 595 else 596 printf(", Automatic mode"); 597 } 598 } else if (pcr & PC873_ECPEN) { 599 ppc->ppc_avm |= PPB_ECP; 600 if (bootverbose) 601 printf(", ECP"); 602 603 if (pcr & PC873_ECPCLK) { /* XXX */ 604 ppc->ppc_avm |= PPB_PS2; 605 if (bootverbose) 606 printf(", PS/2"); 607 } 608 } else { 609 outb(idport, PC873_PTR); 610 ptr = inb(idport + 1); 611 if (ptr & PC873_EXTENDED) { 612 ppc->ppc_avm |= PPB_SPP; 613 if (bootverbose) 614 printf(", SPP"); 615 } 616 } 617 } else { 618 if (bootverbose) 619 printf("PC873xx unlocked"); 620 621 if (chipset_mode & PPB_ECP) { 622 if ((chipset_mode & PPB_EPP) && bootverbose) 623 printf(", ECP+EPP not supported"); 624 625 pcr &= ~PC873_EPPEN; 626 pcr |= (PC873_ECPEN | PC873_ECPCLK); /* XXX */ 627 outb(idport + 1, pcr); 628 outb(idport + 1, pcr); 629 630 if (bootverbose) 631 printf(", ECP"); 632 633 } else if (chipset_mode & PPB_EPP) { 634 pcr &= ~(PC873_ECPEN | PC873_ECPCLK); 635 pcr |= (PC873_EPPEN | PC873_EPP19); 636 outb(idport + 1, pcr); 637 outb(idport + 1, pcr); 638 639 ppc->ppc_epp = EPP_1_9; /* XXX */ 640 641 if (bootverbose) 642 printf(", EPP1.9"); 643 644 /* enable automatic direction turnover */ 645 if (ppc->ppc_model == NS_PC87332) { 646 outb(idport, PC873_PTR); 647 ptr = inb(idport + 1); 648 ptr &= ~PC873_EPPRDIR; 649 outb(idport + 1, ptr); 650 outb(idport + 1, ptr); 651 652 if (bootverbose) 653 printf(", Automatic mode"); 654 } 655 } else { 656 pcr &= ~(PC873_ECPEN | PC873_ECPCLK | PC873_EPPEN); 657 outb(idport + 1, pcr); 658 outb(idport + 1, pcr); 659 660 /* configure extended bit in PTR */ 661 outb(idport, PC873_PTR); 662 ptr = inb(idport + 1); 663 664 if (chipset_mode & PPB_PS2) { 665 ptr |= PC873_EXTENDED; 666 667 if (bootverbose) 668 printf(", PS/2"); 669 670 } else { 671 /* default to NIBBLE mode */ 672 ptr &= ~PC873_EXTENDED; 673 674 if (bootverbose) 675 printf(", NIBBLE"); 676 } 677 outb(idport + 1, ptr); 678 outb(idport + 1, ptr); 679 } 680 681 ppc->ppc_avm = chipset_mode; 682 } 683 684 if (bootverbose) 685 printf("\n"); 686 687 ppc->ppc_type = PPC_TYPE_GENERIC; 688 ppc_generic_setmode(ppc, chipset_mode); 689 690 return(chipset_mode); 691 } 692 return(-1); 693 } 694 695 /* 696 * ppc_smc37c66xgt_detect 697 * 698 * SMC FDC37C66xGT configuration. 699 */ 700 static int 701 ppc_smc37c66xgt_detect(struct ppc_data *ppc, int chipset_mode) 702 { 703 int i; 704 u_char r; 705 int type = -1; 706 int csr = SMC66x_CSR; /* initial value is 0x3F0 */ 707 708 int port_address[] = { -1 /* disabled */ , 0x3bc, 0x378, 0x278 }; 709 710 #define cio csr+1 /* config IO port is either 0x3F1 or 0x371 */ 711 712 /* 713 * Detection: enter configuration mode and read CRD register. 714 */ 715 PPC_CONFIG_LOCK(ppc); 716 outb(csr, SMC665_iCODE); 717 outb(csr, SMC665_iCODE); 718 PPC_CONFIG_UNLOCK(ppc); 719 720 outb(csr, 0xd); 721 if (inb(cio) == 0x65) { 722 type = SMC_37C665GT; 723 goto config; 724 } 725 726 for (i = 0; i < 2; i++) { 727 PPC_CONFIG_LOCK(ppc); 728 outb(csr, SMC666_iCODE); 729 outb(csr, SMC666_iCODE); 730 PPC_CONFIG_UNLOCK(ppc); 731 732 outb(csr, 0xd); 733 if (inb(cio) == 0x66) { 734 type = SMC_37C666GT; 735 break; 736 } 737 738 /* Another chance, CSR may be hard-configured to be at 0x370 */ 739 csr = SMC666_CSR; 740 } 741 742 config: 743 /* 744 * If chipset not found, do not continue. 745 */ 746 if (type == -1) { 747 outb(csr, 0xaa); /* end config mode */ 748 return (-1); 749 } 750 751 /* select CR1 */ 752 outb(csr, 0x1); 753 754 /* read the port's address: bits 0 and 1 of CR1 */ 755 r = inb(cio) & SMC_CR1_ADDR; 756 if (port_address[(int)r] != ppc->ppc_base) { 757 outb(csr, 0xaa); /* end config mode */ 758 return (-1); 759 } 760 761 ppc->ppc_model = type; 762 763 /* 764 * CR1 and CR4 registers bits 3 and 0/1 for mode configuration 765 * If SPP mode is detected, try to set ECP+EPP mode 766 */ 767 768 if (bootverbose) { 769 outb(csr, 0x1); 770 device_printf(ppc->ppc_dev, "SMC registers CR1=0x%x", 771 inb(cio) & 0xff); 772 773 outb(csr, 0x4); 774 printf(" CR4=0x%x", inb(cio) & 0xff); 775 } 776 777 /* select CR1 */ 778 outb(csr, 0x1); 779 780 if (!chipset_mode) { 781 /* autodetect mode */ 782 783 /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ 784 if (type == SMC_37C666GT) { 785 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 786 if (bootverbose) 787 printf(" configuration hardwired, supposing " \ 788 "ECP+EPP SPP"); 789 790 } else 791 if ((inb(cio) & SMC_CR1_MODE) == 0) { 792 /* already in extended parallel port mode, read CR4 */ 793 outb(csr, 0x4); 794 r = (inb(cio) & SMC_CR4_EMODE); 795 796 switch (r) { 797 case SMC_SPP: 798 ppc->ppc_avm |= PPB_SPP; 799 if (bootverbose) 800 printf(" SPP"); 801 break; 802 803 case SMC_EPPSPP: 804 ppc->ppc_avm |= PPB_EPP | PPB_SPP; 805 if (bootverbose) 806 printf(" EPP SPP"); 807 break; 808 809 case SMC_ECP: 810 ppc->ppc_avm |= PPB_ECP | PPB_SPP; 811 if (bootverbose) 812 printf(" ECP SPP"); 813 break; 814 815 case SMC_ECPEPP: 816 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 817 if (bootverbose) 818 printf(" ECP+EPP SPP"); 819 break; 820 } 821 } else { 822 /* not an extended port mode */ 823 ppc->ppc_avm |= PPB_SPP; 824 if (bootverbose) 825 printf(" SPP"); 826 } 827 828 } else { 829 /* mode forced */ 830 ppc->ppc_avm = chipset_mode; 831 832 /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ 833 if (type == SMC_37C666GT) 834 goto end_detect; 835 836 r = inb(cio); 837 if ((chipset_mode & (PPB_ECP | PPB_EPP)) == 0) { 838 /* do not use ECP when the mode is not forced to */ 839 outb(cio, r | SMC_CR1_MODE); 840 if (bootverbose) 841 printf(" SPP"); 842 } else { 843 /* an extended mode is selected */ 844 outb(cio, r & ~SMC_CR1_MODE); 845 846 /* read CR4 register and reset mode field */ 847 outb(csr, 0x4); 848 r = inb(cio) & ~SMC_CR4_EMODE; 849 850 if (chipset_mode & PPB_ECP) { 851 if (chipset_mode & PPB_EPP) { 852 outb(cio, r | SMC_ECPEPP); 853 if (bootverbose) 854 printf(" ECP+EPP"); 855 } else { 856 outb(cio, r | SMC_ECP); 857 if (bootverbose) 858 printf(" ECP"); 859 } 860 } else { 861 /* PPB_EPP is set */ 862 outb(cio, r | SMC_EPPSPP); 863 if (bootverbose) 864 printf(" EPP SPP"); 865 } 866 } 867 ppc->ppc_avm = chipset_mode; 868 } 869 870 /* set FIFO threshold to 16 */ 871 if (ppc->ppc_avm & PPB_ECP) { 872 /* select CRA */ 873 outb(csr, 0xa); 874 outb(cio, 16); 875 } 876 877 end_detect: 878 879 if (bootverbose) 880 printf ("\n"); 881 882 if (ppc->ppc_avm & PPB_EPP) { 883 /* select CR4 */ 884 outb(csr, 0x4); 885 r = inb(cio); 886 887 /* 888 * Set the EPP protocol... 889 * Low=EPP 1.9 (1284 standard) and High=EPP 1.7 890 */ 891 if (ppc->ppc_epp == EPP_1_9) 892 outb(cio, (r & ~SMC_CR4_EPPTYPE)); 893 else 894 outb(cio, (r | SMC_CR4_EPPTYPE)); 895 } 896 897 outb(csr, 0xaa); /* end config mode */ 898 899 ppc->ppc_type = PPC_TYPE_SMCLIKE; 900 ppc_smclike_setmode(ppc, chipset_mode); 901 902 return (chipset_mode); 903 } 904 905 /* 906 * SMC FDC37C935 configuration 907 * Found on many Alpha machines 908 */ 909 static int 910 ppc_smc37c935_detect(struct ppc_data *ppc, int chipset_mode) 911 { 912 int type = -1; 913 914 PPC_CONFIG_LOCK(ppc); 915 outb(SMC935_CFG, 0x55); /* enter config mode */ 916 outb(SMC935_CFG, 0x55); 917 PPC_CONFIG_UNLOCK(ppc); 918 919 outb(SMC935_IND, SMC935_ID); /* check device id */ 920 if (inb(SMC935_DAT) == 0x2) 921 type = SMC_37C935; 922 923 if (type == -1) { 924 outb(SMC935_CFG, 0xaa); /* exit config mode */ 925 return (-1); 926 } 927 928 ppc->ppc_model = type; 929 930 outb(SMC935_IND, SMC935_LOGDEV); /* select parallel port, */ 931 outb(SMC935_DAT, 3); /* which is logical device 3 */ 932 933 /* set io port base */ 934 outb(SMC935_IND, SMC935_PORTHI); 935 outb(SMC935_DAT, (u_char)((ppc->ppc_base & 0xff00) >> 8)); 936 outb(SMC935_IND, SMC935_PORTLO); 937 outb(SMC935_DAT, (u_char)(ppc->ppc_base & 0xff)); 938 939 if (!chipset_mode) 940 ppc->ppc_avm = PPB_COMPATIBLE; /* default mode */ 941 else { 942 ppc->ppc_avm = chipset_mode; 943 outb(SMC935_IND, SMC935_PPMODE); 944 outb(SMC935_DAT, SMC935_CENT); /* start in compatible mode */ 945 946 /* SPP + EPP or just plain SPP */ 947 if (chipset_mode & (PPB_SPP)) { 948 if (chipset_mode & PPB_EPP) { 949 if (ppc->ppc_epp == EPP_1_9) { 950 outb(SMC935_IND, SMC935_PPMODE); 951 outb(SMC935_DAT, SMC935_EPP19SPP); 952 } 953 if (ppc->ppc_epp == EPP_1_7) { 954 outb(SMC935_IND, SMC935_PPMODE); 955 outb(SMC935_DAT, SMC935_EPP17SPP); 956 } 957 } else { 958 outb(SMC935_IND, SMC935_PPMODE); 959 outb(SMC935_DAT, SMC935_SPP); 960 } 961 } 962 963 /* ECP + EPP or just plain ECP */ 964 if (chipset_mode & PPB_ECP) { 965 if (chipset_mode & PPB_EPP) { 966 if (ppc->ppc_epp == EPP_1_9) { 967 outb(SMC935_IND, SMC935_PPMODE); 968 outb(SMC935_DAT, SMC935_ECPEPP19); 969 } 970 if (ppc->ppc_epp == EPP_1_7) { 971 outb(SMC935_IND, SMC935_PPMODE); 972 outb(SMC935_DAT, SMC935_ECPEPP17); 973 } 974 } else { 975 outb(SMC935_IND, SMC935_PPMODE); 976 outb(SMC935_DAT, SMC935_ECP); 977 } 978 } 979 } 980 981 outb(SMC935_CFG, 0xaa); /* exit config mode */ 982 983 ppc->ppc_type = PPC_TYPE_SMCLIKE; 984 ppc_smclike_setmode(ppc, chipset_mode); 985 986 return (chipset_mode); 987 } 988 989 /* 990 * Winbond W83877F stuff 991 * 992 * EFER: extended function enable register 993 * EFIR: extended function index register 994 * EFDR: extended function data register 995 */ 996 #define efir ((efer == 0x250) ? 0x251 : 0x3f0) 997 #define efdr ((efer == 0x250) ? 0x252 : 0x3f1) 998 999 static int w83877f_efers[] = { 0x250, 0x3f0, 0x3f0, 0x250 }; 1000 static int w83877f_keys[] = { 0x89, 0x86, 0x87, 0x88 }; 1001 static int w83877f_keyiter[] = { 1, 2, 2, 1 }; 1002 static int w83877f_hefs[] = { WINB_HEFERE, WINB_HEFRAS, WINB_HEFERE | WINB_HEFRAS, 0 }; 1003 1004 static int 1005 ppc_w83877f_detect(struct ppc_data *ppc, int chipset_mode) 1006 { 1007 int i, j, efer; 1008 unsigned char r, hefere, hefras; 1009 1010 for (i = 0; i < 4; i ++) { 1011 /* first try to enable configuration registers */ 1012 efer = w83877f_efers[i]; 1013 1014 /* write the key to the EFER */ 1015 for (j = 0; j < w83877f_keyiter[i]; j ++) 1016 outb (efer, w83877f_keys[i]); 1017 1018 /* then check HEFERE and HEFRAS bits */ 1019 outb (efir, 0x0c); 1020 hefere = inb(efdr) & WINB_HEFERE; 1021 1022 outb (efir, 0x16); 1023 hefras = inb(efdr) & WINB_HEFRAS; 1024 1025 /* 1026 * HEFRAS HEFERE 1027 * 0 1 write 89h to 250h (power-on default) 1028 * 1 0 write 86h twice to 3f0h 1029 * 1 1 write 87h twice to 3f0h 1030 * 0 0 write 88h to 250h 1031 */ 1032 if ((hefere | hefras) == w83877f_hefs[i]) 1033 goto found; 1034 } 1035 1036 return (-1); /* failed */ 1037 1038 found: 1039 /* check base port address - read from CR23 */ 1040 outb(efir, 0x23); 1041 if (ppc->ppc_base != inb(efdr) * 4) /* 4 bytes boundaries */ 1042 return (-1); 1043 1044 /* read CHIP ID from CR9/bits0-3 */ 1045 outb(efir, 0x9); 1046 1047 switch (inb(efdr) & WINB_CHIPID) { 1048 case WINB_W83877F_ID: 1049 ppc->ppc_model = WINB_W83877F; 1050 break; 1051 1052 case WINB_W83877AF_ID: 1053 ppc->ppc_model = WINB_W83877AF; 1054 break; 1055 1056 default: 1057 ppc->ppc_model = WINB_UNKNOWN; 1058 } 1059 1060 if (bootverbose) { 1061 /* dump of registers */ 1062 device_printf(ppc->ppc_dev, "0x%x - ", w83877f_keys[i]); 1063 for (i = 0; i <= 0xd; i ++) { 1064 outb(efir, i); 1065 printf("0x%x ", inb(efdr)); 1066 } 1067 for (i = 0x10; i <= 0x17; i ++) { 1068 outb(efir, i); 1069 printf("0x%x ", inb(efdr)); 1070 } 1071 outb(efir, 0x1e); 1072 printf("0x%x ", inb(efdr)); 1073 for (i = 0x20; i <= 0x29; i ++) { 1074 outb(efir, i); 1075 printf("0x%x ", inb(efdr)); 1076 } 1077 printf("\n"); 1078 } 1079 1080 ppc->ppc_type = PPC_TYPE_GENERIC; 1081 1082 if (!chipset_mode) { 1083 /* autodetect mode */ 1084 1085 /* select CR0 */ 1086 outb(efir, 0x0); 1087 r = inb(efdr) & (WINB_PRTMODS0 | WINB_PRTMODS1); 1088 1089 /* select CR9 */ 1090 outb(efir, 0x9); 1091 r |= (inb(efdr) & WINB_PRTMODS2); 1092 1093 switch (r) { 1094 case WINB_W83757: 1095 if (bootverbose) 1096 device_printf(ppc->ppc_dev, 1097 "W83757 compatible mode\n"); 1098 return (-1); /* generic or SMC-like */ 1099 1100 case WINB_EXTFDC: 1101 case WINB_EXTADP: 1102 case WINB_EXT2FDD: 1103 case WINB_JOYSTICK: 1104 if (bootverbose) 1105 device_printf(ppc->ppc_dev, 1106 "not in parallel port mode\n"); 1107 return (-1); 1108 1109 case (WINB_PARALLEL | WINB_EPP_SPP): 1110 ppc->ppc_avm |= PPB_EPP | PPB_SPP; 1111 if (bootverbose) 1112 device_printf(ppc->ppc_dev, "EPP SPP\n"); 1113 break; 1114 1115 case (WINB_PARALLEL | WINB_ECP): 1116 ppc->ppc_avm |= PPB_ECP | PPB_SPP; 1117 if (bootverbose) 1118 device_printf(ppc->ppc_dev, "ECP SPP\n"); 1119 break; 1120 1121 case (WINB_PARALLEL | WINB_ECP_EPP): 1122 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 1123 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1124 1125 if (bootverbose) 1126 device_printf(ppc->ppc_dev, "ECP+EPP SPP\n"); 1127 break; 1128 default: 1129 printf("%s: unknown case (0x%x)!\n", __func__, r); 1130 } 1131 1132 } else { 1133 /* mode forced */ 1134 1135 /* select CR9 and set PRTMODS2 bit */ 1136 outb(efir, 0x9); 1137 outb(efdr, inb(efdr) & ~WINB_PRTMODS2); 1138 1139 /* select CR0 and reset PRTMODSx bits */ 1140 outb(efir, 0x0); 1141 outb(efdr, inb(efdr) & ~(WINB_PRTMODS0 | WINB_PRTMODS1)); 1142 1143 if (chipset_mode & PPB_ECP) { 1144 if (chipset_mode & PPB_EPP) { 1145 outb(efdr, inb(efdr) | WINB_ECP_EPP); 1146 if (bootverbose) 1147 device_printf(ppc->ppc_dev, 1148 "ECP+EPP\n"); 1149 1150 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1151 1152 } else { 1153 outb(efdr, inb(efdr) | WINB_ECP); 1154 if (bootverbose) 1155 device_printf(ppc->ppc_dev, "ECP\n"); 1156 } 1157 } else { 1158 /* select EPP_SPP otherwise */ 1159 outb(efdr, inb(efdr) | WINB_EPP_SPP); 1160 if (bootverbose) 1161 device_printf(ppc->ppc_dev, "EPP SPP\n"); 1162 } 1163 ppc->ppc_avm = chipset_mode; 1164 } 1165 1166 /* exit configuration mode */ 1167 outb(efer, 0xaa); 1168 1169 switch (ppc->ppc_type) { 1170 case PPC_TYPE_SMCLIKE: 1171 ppc_smclike_setmode(ppc, chipset_mode); 1172 break; 1173 default: 1174 ppc_generic_setmode(ppc, chipset_mode); 1175 break; 1176 } 1177 1178 return (chipset_mode); 1179 } 1180 #endif 1181 1182 /* 1183 * ppc_generic_detect 1184 */ 1185 static int 1186 ppc_generic_detect(struct ppc_data *ppc, int chipset_mode) 1187 { 1188 /* default to generic */ 1189 ppc->ppc_type = PPC_TYPE_GENERIC; 1190 1191 if (bootverbose) 1192 device_printf(ppc->ppc_dev, "SPP"); 1193 1194 /* first, check for ECP */ 1195 w_ecr(ppc, PPC_ECR_PS2); 1196 if ((r_ecr(ppc) & 0xe0) == PPC_ECR_PS2) { 1197 ppc->ppc_dtm |= PPB_ECP | PPB_SPP; 1198 if (bootverbose) 1199 printf(" ECP "); 1200 1201 /* search for SMC style ECP+EPP mode */ 1202 w_ecr(ppc, PPC_ECR_EPP); 1203 } 1204 1205 /* try to reset EPP timeout bit */ 1206 if (ppc_check_epp_timeout(ppc)) { 1207 ppc->ppc_dtm |= PPB_EPP; 1208 1209 if (ppc->ppc_dtm & PPB_ECP) { 1210 /* SMC like chipset found */ 1211 ppc->ppc_model = SMC_LIKE; 1212 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1213 1214 if (bootverbose) 1215 printf(" ECP+EPP"); 1216 } else { 1217 if (bootverbose) 1218 printf(" EPP"); 1219 } 1220 } else { 1221 /* restore to standard mode */ 1222 w_ecr(ppc, PPC_ECR_STD); 1223 } 1224 1225 /* XXX try to detect NIBBLE and PS2 modes */ 1226 ppc->ppc_dtm |= PPB_NIBBLE; 1227 1228 if (chipset_mode) 1229 ppc->ppc_avm = chipset_mode; 1230 else 1231 ppc->ppc_avm = ppc->ppc_dtm; 1232 1233 if (bootverbose) 1234 printf("\n"); 1235 1236 switch (ppc->ppc_type) { 1237 case PPC_TYPE_SMCLIKE: 1238 ppc_smclike_setmode(ppc, chipset_mode); 1239 break; 1240 default: 1241 ppc_generic_setmode(ppc, chipset_mode); 1242 break; 1243 } 1244 1245 return (chipset_mode); 1246 } 1247 1248 /* 1249 * ppc_detect() 1250 * 1251 * mode is the mode suggested at boot 1252 */ 1253 static int 1254 ppc_detect(struct ppc_data *ppc, int chipset_mode) { 1255 #ifdef PPC_PROBE_CHIPSET 1256 int i, mode; 1257 1258 /* list of supported chipsets */ 1259 int (*chipset_detect[])(struct ppc_data *, int) = { 1260 ppc_pc873xx_detect, 1261 ppc_smc37c66xgt_detect, 1262 ppc_w83877f_detect, 1263 ppc_smc37c935_detect, 1264 ppc_generic_detect, 1265 NULL 1266 }; 1267 #endif 1268 1269 /* if can't find the port and mode not forced return error */ 1270 if (!ppc_detect_port(ppc) && chipset_mode == 0) 1271 return (EIO); /* failed, port not present */ 1272 1273 /* assume centronics compatible mode is supported */ 1274 ppc->ppc_avm = PPB_COMPATIBLE; 1275 1276 #ifdef PPC_PROBE_CHIPSET 1277 /* we have to differenciate available chipset modes, 1278 * chipset running modes and IEEE-1284 operating modes 1279 * 1280 * after detection, the port must support running in compatible mode 1281 */ 1282 if (ppc->ppc_flags & 0x40) { 1283 if (bootverbose) 1284 printf("ppc: chipset forced to generic\n"); 1285 #endif 1286 1287 ppc->ppc_mode = ppc_generic_detect(ppc, chipset_mode); 1288 1289 #ifdef PPC_PROBE_CHIPSET 1290 } else { 1291 for (i=0; chipset_detect[i] != NULL; i++) { 1292 if ((mode = chipset_detect[i](ppc, chipset_mode)) != -1) { 1293 ppc->ppc_mode = mode; 1294 break; 1295 } 1296 } 1297 } 1298 #endif 1299 1300 /* configure/detect ECP FIFO */ 1301 if ((ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_flags & 0x80)) 1302 ppc_detect_fifo(ppc); 1303 1304 return (0); 1305 } 1306 1307 /* 1308 * ppc_exec_microseq() 1309 * 1310 * Execute a microsequence. 1311 * Microsequence mechanism is supposed to handle fast I/O operations. 1312 */ 1313 int 1314 ppc_exec_microseq(device_t dev, struct ppb_microseq **p_msq) 1315 { 1316 struct ppc_data *ppc = DEVTOSOFTC(dev); 1317 struct ppb_microseq *mi; 1318 char cc, *p; 1319 int i, iter, len; 1320 int error; 1321 1322 int reg; 1323 char mask; 1324 int accum = 0; 1325 char *ptr = NULL; 1326 1327 struct ppb_microseq *stack = NULL; 1328 1329 /* microsequence registers are equivalent to PC-like port registers */ 1330 1331 #define r_reg(reg,ppc) (bus_read_1((ppc)->res_ioport, reg)) 1332 #define w_reg(reg, ppc, byte) (bus_write_1((ppc)->res_ioport, reg, byte)) 1333 1334 #define INCR_PC (mi ++) /* increment program counter */ 1335 1336 PPC_ASSERT_LOCKED(ppc); 1337 mi = *p_msq; 1338 for (;;) { 1339 switch (mi->opcode) { 1340 case MS_OP_RSET: 1341 cc = r_reg(mi->arg[0].i, ppc); 1342 cc &= (char)mi->arg[2].i; /* clear mask */ 1343 cc |= (char)mi->arg[1].i; /* assert mask */ 1344 w_reg(mi->arg[0].i, ppc, cc); 1345 INCR_PC; 1346 break; 1347 1348 case MS_OP_RASSERT_P: 1349 reg = mi->arg[1].i; 1350 ptr = ppc->ppc_ptr; 1351 1352 if ((len = mi->arg[0].i) == MS_ACCUM) { 1353 accum = ppc->ppc_accum; 1354 for (; accum; accum--) 1355 w_reg(reg, ppc, *ptr++); 1356 ppc->ppc_accum = accum; 1357 } else 1358 for (i=0; i<len; i++) 1359 w_reg(reg, ppc, *ptr++); 1360 ppc->ppc_ptr = ptr; 1361 1362 INCR_PC; 1363 break; 1364 1365 case MS_OP_RFETCH_P: 1366 reg = mi->arg[1].i; 1367 mask = (char)mi->arg[2].i; 1368 ptr = ppc->ppc_ptr; 1369 1370 if ((len = mi->arg[0].i) == MS_ACCUM) { 1371 accum = ppc->ppc_accum; 1372 for (; accum; accum--) 1373 *ptr++ = r_reg(reg, ppc) & mask; 1374 ppc->ppc_accum = accum; 1375 } else 1376 for (i=0; i<len; i++) 1377 *ptr++ = r_reg(reg, ppc) & mask; 1378 ppc->ppc_ptr = ptr; 1379 1380 INCR_PC; 1381 break; 1382 1383 case MS_OP_RFETCH: 1384 *((char *) mi->arg[2].p) = r_reg(mi->arg[0].i, ppc) & 1385 (char)mi->arg[1].i; 1386 INCR_PC; 1387 break; 1388 1389 case MS_OP_RASSERT: 1390 case MS_OP_DELAY: 1391 1392 /* let's suppose the next instr. is the same */ 1393 prefetch: 1394 for (;mi->opcode == MS_OP_RASSERT; INCR_PC) 1395 w_reg(mi->arg[0].i, ppc, (char)mi->arg[1].i); 1396 1397 if (mi->opcode == MS_OP_DELAY) { 1398 DELAY(mi->arg[0].i); 1399 INCR_PC; 1400 goto prefetch; 1401 } 1402 break; 1403 1404 case MS_OP_ADELAY: 1405 if (mi->arg[0].i) { 1406 PPC_UNLOCK(ppc); 1407 pause("ppbdelay", mi->arg[0].i * (hz/1000)); 1408 PPC_LOCK(ppc); 1409 } 1410 INCR_PC; 1411 break; 1412 1413 case MS_OP_TRIG: 1414 reg = mi->arg[0].i; 1415 iter = mi->arg[1].i; 1416 p = (char *)mi->arg[2].p; 1417 1418 /* XXX delay limited to 255 us */ 1419 for (i=0; i<iter; i++) { 1420 w_reg(reg, ppc, *p++); 1421 DELAY((unsigned char)*p++); 1422 } 1423 INCR_PC; 1424 break; 1425 1426 case MS_OP_SET: 1427 ppc->ppc_accum = mi->arg[0].i; 1428 INCR_PC; 1429 break; 1430 1431 case MS_OP_DBRA: 1432 if (--ppc->ppc_accum > 0) 1433 mi += mi->arg[0].i; 1434 INCR_PC; 1435 break; 1436 1437 case MS_OP_BRSET: 1438 cc = r_str(ppc); 1439 if ((cc & (char)mi->arg[0].i) == (char)mi->arg[0].i) 1440 mi += mi->arg[1].i; 1441 INCR_PC; 1442 break; 1443 1444 case MS_OP_BRCLEAR: 1445 cc = r_str(ppc); 1446 if ((cc & (char)mi->arg[0].i) == 0) 1447 mi += mi->arg[1].i; 1448 INCR_PC; 1449 break; 1450 1451 case MS_OP_BRSTAT: 1452 cc = r_str(ppc); 1453 if ((cc & ((char)mi->arg[0].i | (char)mi->arg[1].i)) == 1454 (char)mi->arg[0].i) 1455 mi += mi->arg[2].i; 1456 INCR_PC; 1457 break; 1458 1459 case MS_OP_C_CALL: 1460 /* 1461 * If the C call returns !0 then end the microseq. 1462 * The current state of ptr is passed to the C function 1463 */ 1464 if ((error = mi->arg[0].f(mi->arg[1].p, ppc->ppc_ptr))) 1465 return (error); 1466 1467 INCR_PC; 1468 break; 1469 1470 case MS_OP_PTR: 1471 ppc->ppc_ptr = (char *)mi->arg[0].p; 1472 INCR_PC; 1473 break; 1474 1475 case MS_OP_CALL: 1476 if (stack) 1477 panic("%s: too much calls", __func__); 1478 1479 if (mi->arg[0].p) { 1480 /* store the state of the actual 1481 * microsequence 1482 */ 1483 stack = mi; 1484 1485 /* jump to the new microsequence */ 1486 mi = (struct ppb_microseq *)mi->arg[0].p; 1487 } else 1488 INCR_PC; 1489 1490 break; 1491 1492 case MS_OP_SUBRET: 1493 /* retrieve microseq and pc state before the call */ 1494 mi = stack; 1495 1496 /* reset the stack */ 1497 stack = NULL; 1498 1499 /* XXX return code */ 1500 1501 INCR_PC; 1502 break; 1503 1504 case MS_OP_PUT: 1505 case MS_OP_GET: 1506 case MS_OP_RET: 1507 /* can't return to ppb level during the execution 1508 * of a submicrosequence */ 1509 if (stack) 1510 panic("%s: can't return to ppb level", 1511 __func__); 1512 1513 /* update pc for ppb level of execution */ 1514 *p_msq = mi; 1515 1516 /* return to ppb level of execution */ 1517 return (0); 1518 1519 default: 1520 panic("%s: unknown microsequence opcode 0x%x", 1521 __func__, mi->opcode); 1522 } 1523 } 1524 1525 /* unreached */ 1526 } 1527 1528 static void 1529 ppcintr(void *arg) 1530 { 1531 struct ppc_data *ppc = arg; 1532 u_char ctr, ecr, str; 1533 1534 /* 1535 * If we have any child interrupt handlers registered, let 1536 * them handle this interrupt. 1537 * 1538 * XXX: If DMA is in progress should we just complete that w/o 1539 * doing this? 1540 */ 1541 PPC_LOCK(ppc); 1542 if (ppc->ppc_intr_hook != NULL && 1543 ppc->ppc_intr_hook(ppc->ppc_intr_arg) == 0) { 1544 PPC_UNLOCK(ppc); 1545 return; 1546 } 1547 1548 str = r_str(ppc); 1549 ctr = r_ctr(ppc); 1550 ecr = r_ecr(ppc); 1551 1552 #if defined(PPC_DEBUG) && PPC_DEBUG > 1 1553 printf("![%x/%x/%x]", ctr, ecr, str); 1554 #endif 1555 1556 /* don't use ecp mode with IRQENABLE set */ 1557 if (ctr & IRQENABLE) { 1558 PPC_UNLOCK(ppc); 1559 return; 1560 } 1561 1562 /* interrupts are generated by nFault signal 1563 * only in ECP mode */ 1564 if ((str & nFAULT) && (ppc->ppc_mode & PPB_ECP)) { 1565 /* check if ppc driver has programmed the 1566 * nFault interrupt */ 1567 if (ppc->ppc_irqstat & PPC_IRQ_nFAULT) { 1568 w_ecr(ppc, ecr | PPC_nFAULT_INTR); 1569 ppc->ppc_irqstat &= ~PPC_IRQ_nFAULT; 1570 } else { 1571 /* shall be handled by underlying layers XXX */ 1572 PPC_UNLOCK(ppc); 1573 return; 1574 } 1575 } 1576 1577 if (ppc->ppc_irqstat & PPC_IRQ_DMA) { 1578 /* disable interrupts (should be done by hardware though) */ 1579 w_ecr(ppc, ecr | PPC_SERVICE_INTR); 1580 ppc->ppc_irqstat &= ~PPC_IRQ_DMA; 1581 ecr = r_ecr(ppc); 1582 1583 /* check if DMA completed */ 1584 if ((ppc->ppc_avm & PPB_ECP) && (ecr & PPC_ENABLE_DMA)) { 1585 #ifdef PPC_DEBUG 1586 printf("a"); 1587 #endif 1588 /* stop DMA */ 1589 w_ecr(ppc, ecr & ~PPC_ENABLE_DMA); 1590 ecr = r_ecr(ppc); 1591 1592 if (ppc->ppc_dmastat == PPC_DMA_STARTED) { 1593 #ifdef PPC_DEBUG 1594 printf("d"); 1595 #endif 1596 ppc->ppc_dmadone(ppc); 1597 ppc->ppc_dmastat = PPC_DMA_COMPLETE; 1598 1599 /* wakeup the waiting process */ 1600 wakeup(ppc); 1601 } 1602 } 1603 } else if (ppc->ppc_irqstat & PPC_IRQ_FIFO) { 1604 /* classic interrupt I/O */ 1605 ppc->ppc_irqstat &= ~PPC_IRQ_FIFO; 1606 } 1607 PPC_UNLOCK(ppc); 1608 1609 return; 1610 } 1611 1612 int 1613 ppc_read(device_t dev, char *buf, int len, int mode) 1614 { 1615 return (EINVAL); 1616 } 1617 1618 int 1619 ppc_write(device_t dev, char *buf, int len, int how) 1620 { 1621 return (EINVAL); 1622 } 1623 1624 int 1625 ppc_reset_epp(device_t dev) 1626 { 1627 struct ppc_data *ppc = DEVTOSOFTC(dev); 1628 1629 PPC_ASSERT_LOCKED(ppc); 1630 ppc_reset_epp_timeout(ppc); 1631 1632 return 0; 1633 } 1634 1635 int 1636 ppc_setmode(device_t dev, int mode) 1637 { 1638 struct ppc_data *ppc = DEVTOSOFTC(dev); 1639 1640 PPC_ASSERT_LOCKED(ppc); 1641 switch (ppc->ppc_type) { 1642 case PPC_TYPE_SMCLIKE: 1643 return (ppc_smclike_setmode(ppc, mode)); 1644 break; 1645 1646 case PPC_TYPE_GENERIC: 1647 default: 1648 return (ppc_generic_setmode(ppc, mode)); 1649 break; 1650 } 1651 1652 /* not reached */ 1653 return (ENXIO); 1654 } 1655 1656 int 1657 ppc_probe(device_t dev, int rid) 1658 { 1659 struct ppc_data *ppc; 1660 #ifdef __i386__ 1661 static short next_bios_ppc = 0; 1662 int error; 1663 rman_res_t port; 1664 #endif 1665 1666 /* 1667 * Allocate the ppc_data structure. 1668 */ 1669 ppc = DEVTOSOFTC(dev); 1670 bzero(ppc, sizeof(struct ppc_data)); 1671 1672 ppc->rid_ioport = rid; 1673 1674 #ifdef __i386__ 1675 /* retrieve ISA parameters */ 1676 error = bus_get_resource(dev, SYS_RES_IOPORT, rid, &port, NULL); 1677 1678 /* 1679 * If port not specified, use bios list. 1680 */ 1681 if (error) { 1682 if ((next_bios_ppc < BIOS_MAX_PPC) && 1683 (*(BIOS_PORTS + next_bios_ppc) != 0)) { 1684 port = *(BIOS_PORTS + next_bios_ppc++); 1685 if (bootverbose) 1686 device_printf(dev, 1687 "parallel port found at 0x%jx\n", port); 1688 } else { 1689 device_printf(dev, "parallel port not found.\n"); 1690 return (ENXIO); 1691 } 1692 bus_set_resource(dev, SYS_RES_IOPORT, rid, port, 1693 IO_LPTSIZE_EXTENDED); 1694 } 1695 #endif 1696 1697 /* IO port is mandatory */ 1698 1699 /* Try "extended" IO port range...*/ 1700 ppc->res_ioport = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, 1701 &ppc->rid_ioport, 1702 IO_LPTSIZE_EXTENDED, 1703 RF_ACTIVE); 1704 1705 if (ppc->res_ioport != 0) { 1706 if (bootverbose) 1707 device_printf(dev, "using extended I/O port range\n"); 1708 } else { 1709 /* Failed? If so, then try the "normal" IO port range... */ 1710 ppc->res_ioport = bus_alloc_resource_anywhere(dev, 1711 SYS_RES_IOPORT, 1712 &ppc->rid_ioport, 1713 IO_LPTSIZE_NORMAL, 1714 RF_ACTIVE); 1715 if (ppc->res_ioport != 0) { 1716 if (bootverbose) 1717 device_printf(dev, "using normal I/O port range\n"); 1718 } else { 1719 if (bootverbose) 1720 device_printf(dev, "cannot reserve I/O port range\n"); 1721 goto error; 1722 } 1723 } 1724 1725 ppc->ppc_base = rman_get_start(ppc->res_ioport); 1726 1727 ppc->ppc_flags = device_get_flags(dev); 1728 1729 if (!(ppc->ppc_flags & 0x20)) { 1730 ppc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 1731 &ppc->rid_irq, 1732 RF_SHAREABLE); 1733 ppc->res_drq = bus_alloc_resource_any(dev, SYS_RES_DRQ, 1734 &ppc->rid_drq, 1735 RF_ACTIVE); 1736 } 1737 1738 if (ppc->res_irq) 1739 ppc->ppc_irq = rman_get_start(ppc->res_irq); 1740 if (ppc->res_drq) 1741 ppc->ppc_dmachan = rman_get_start(ppc->res_drq); 1742 1743 ppc->ppc_dev = dev; 1744 ppc->ppc_model = GENERIC; 1745 1746 ppc->ppc_mode = PPB_COMPATIBLE; 1747 ppc->ppc_epp = (ppc->ppc_flags & 0x10) >> 4; 1748 1749 ppc->ppc_type = PPC_TYPE_GENERIC; 1750 1751 /* 1752 * Try to detect the chipset and its mode. 1753 */ 1754 if (ppc_detect(ppc, ppc->ppc_flags & 0xf)) 1755 goto error; 1756 1757 return (0); 1758 1759 error: 1760 if (ppc->res_irq != 0) { 1761 bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, 1762 ppc->res_irq); 1763 } 1764 if (ppc->res_ioport != 0) { 1765 bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, 1766 ppc->res_ioport); 1767 } 1768 if (ppc->res_drq != 0) { 1769 bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, 1770 ppc->res_drq); 1771 } 1772 return (ENXIO); 1773 } 1774 1775 int 1776 ppc_attach(device_t dev) 1777 { 1778 struct ppc_data *ppc = DEVTOSOFTC(dev); 1779 int error; 1780 1781 mtx_init(&ppc->ppc_lock, device_get_nameunit(dev), "ppc", MTX_DEF); 1782 1783 device_printf(dev, "%s chipset (%s) in %s mode%s\n", 1784 ppc_models[ppc->ppc_model], ppc_avms[ppc->ppc_avm], 1785 ppc_modes[ppc->ppc_mode], (PPB_IS_EPP(ppc->ppc_mode)) ? 1786 ppc_epp_protocol[ppc->ppc_epp] : ""); 1787 1788 if (ppc->ppc_fifo) 1789 device_printf(dev, "FIFO with %d/%d/%d bytes threshold\n", 1790 ppc->ppc_fifo, ppc->ppc_wthr, ppc->ppc_rthr); 1791 1792 if (ppc->res_irq) { 1793 /* default to the tty mask for registration */ /* XXX */ 1794 error = bus_setup_intr(dev, ppc->res_irq, INTR_TYPE_TTY | 1795 INTR_MPSAFE, NULL, ppcintr, ppc, &ppc->intr_cookie); 1796 if (error) { 1797 device_printf(dev, 1798 "failed to register interrupt handler: %d\n", 1799 error); 1800 mtx_destroy(&ppc->ppc_lock); 1801 return (error); 1802 } 1803 } 1804 1805 /* add ppbus as a child of this isa to parallel bridge */ 1806 ppc->ppbus = device_add_child(dev, "ppbus", -1); 1807 1808 /* 1809 * Probe the ppbus and attach devices found. 1810 */ 1811 device_probe_and_attach(ppc->ppbus); 1812 1813 return (0); 1814 } 1815 1816 int 1817 ppc_detach(device_t dev) 1818 { 1819 struct ppc_data *ppc = DEVTOSOFTC(dev); 1820 1821 if (ppc->res_irq == 0) { 1822 return (ENXIO); 1823 } 1824 1825 /* detach & delete all children */ 1826 device_delete_children(dev); 1827 1828 if (ppc->res_irq != 0) { 1829 bus_teardown_intr(dev, ppc->res_irq, ppc->intr_cookie); 1830 bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, 1831 ppc->res_irq); 1832 } 1833 if (ppc->res_ioport != 0) { 1834 bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, 1835 ppc->res_ioport); 1836 } 1837 if (ppc->res_drq != 0) { 1838 bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, 1839 ppc->res_drq); 1840 } 1841 1842 mtx_destroy(&ppc->ppc_lock); 1843 1844 return (0); 1845 } 1846 1847 u_char 1848 ppc_io(device_t ppcdev, int iop, u_char *addr, int cnt, u_char byte) 1849 { 1850 struct ppc_data *ppc = DEVTOSOFTC(ppcdev); 1851 1852 PPC_ASSERT_LOCKED(ppc); 1853 switch (iop) { 1854 case PPB_OUTSB_EPP: 1855 bus_write_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); 1856 break; 1857 case PPB_OUTSW_EPP: 1858 bus_write_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); 1859 break; 1860 case PPB_OUTSL_EPP: 1861 bus_write_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); 1862 break; 1863 case PPB_INSB_EPP: 1864 bus_read_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); 1865 break; 1866 case PPB_INSW_EPP: 1867 bus_read_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); 1868 break; 1869 case PPB_INSL_EPP: 1870 bus_read_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); 1871 break; 1872 case PPB_RDTR: 1873 return (r_dtr(ppc)); 1874 case PPB_RSTR: 1875 return (r_str(ppc)); 1876 case PPB_RCTR: 1877 return (r_ctr(ppc)); 1878 case PPB_REPP_A: 1879 return (r_epp_A(ppc)); 1880 case PPB_REPP_D: 1881 return (r_epp_D(ppc)); 1882 case PPB_RECR: 1883 return (r_ecr(ppc)); 1884 case PPB_RFIFO: 1885 return (r_fifo(ppc)); 1886 case PPB_WDTR: 1887 w_dtr(ppc, byte); 1888 break; 1889 case PPB_WSTR: 1890 w_str(ppc, byte); 1891 break; 1892 case PPB_WCTR: 1893 w_ctr(ppc, byte); 1894 break; 1895 case PPB_WEPP_A: 1896 w_epp_A(ppc, byte); 1897 break; 1898 case PPB_WEPP_D: 1899 w_epp_D(ppc, byte); 1900 break; 1901 case PPB_WECR: 1902 w_ecr(ppc, byte); 1903 break; 1904 case PPB_WFIFO: 1905 w_fifo(ppc, byte); 1906 break; 1907 default: 1908 panic("%s: unknown I/O operation", __func__); 1909 break; 1910 } 1911 1912 return (0); /* not significative */ 1913 } 1914 1915 int 1916 ppc_read_ivar(device_t bus, device_t dev, int index, uintptr_t *val) 1917 { 1918 struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); 1919 1920 switch (index) { 1921 case PPC_IVAR_EPP_PROTO: 1922 PPC_ASSERT_LOCKED(ppc); 1923 *val = (u_long)ppc->ppc_epp; 1924 break; 1925 case PPC_IVAR_LOCK: 1926 *val = (uintptr_t)&ppc->ppc_lock; 1927 break; 1928 default: 1929 return (ENOENT); 1930 } 1931 1932 return (0); 1933 } 1934 1935 int 1936 ppc_write_ivar(device_t bus, device_t dev, int index, uintptr_t val) 1937 { 1938 struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); 1939 1940 switch (index) { 1941 case PPC_IVAR_INTR_HANDLER: 1942 PPC_ASSERT_LOCKED(ppc); 1943 if (dev != ppc->ppbus) 1944 return (EINVAL); 1945 if (val == 0) { 1946 ppc->ppc_intr_hook = NULL; 1947 break; 1948 } 1949 if (ppc->ppc_intr_hook != NULL) 1950 return (EBUSY); 1951 ppc->ppc_intr_hook = (void *)val; 1952 ppc->ppc_intr_arg = device_get_softc(dev); 1953 break; 1954 default: 1955 return (ENOENT); 1956 } 1957 1958 return (0); 1959 } 1960 1961 /* 1962 * We allow child devices to allocate an IRQ resource at rid 0 for their 1963 * interrupt handlers. 1964 */ 1965 struct resource * 1966 ppc_alloc_resource(device_t bus, device_t child, int type, int *rid, 1967 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1968 { 1969 struct ppc_data *ppc = DEVTOSOFTC(bus); 1970 1971 switch (type) { 1972 case SYS_RES_IRQ: 1973 if (*rid == 0) 1974 return (ppc->res_irq); 1975 break; 1976 } 1977 return (NULL); 1978 } 1979 1980 int 1981 ppc_release_resource(device_t bus, device_t child, int type, int rid, 1982 struct resource *r) 1983 { 1984 #ifdef INVARIANTS 1985 struct ppc_data *ppc = DEVTOSOFTC(bus); 1986 #endif 1987 1988 switch (type) { 1989 case SYS_RES_IRQ: 1990 if (rid == 0) { 1991 KASSERT(r == ppc->res_irq, 1992 ("ppc child IRQ resource mismatch")); 1993 return (0); 1994 } 1995 break; 1996 } 1997 return (EINVAL); 1998 } 1999 2000 MODULE_DEPEND(ppc, ppbus, 1, 1, 1); 2001