1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1997-2000 Nicolas Souchu 5 * Copyright (c) 2001 Alcove - Nicolas Souchu 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 #include "opt_ppc.h" 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/bus.h> 36 #include <sys/kernel.h> 37 #include <sys/lock.h> 38 #include <sys/interrupt.h> 39 #include <sys/module.h> 40 #include <sys/malloc.h> 41 #include <sys/mutex.h> 42 #include <sys/proc.h> 43 44 #include <machine/bus.h> 45 #include <machine/resource.h> 46 #include <sys/rman.h> 47 48 #ifdef __i386__ 49 #include <vm/vm.h> 50 #include <vm/pmap.h> 51 #include <machine/vmparam.h> 52 #include <machine/pc/bios.h> 53 #endif 54 55 #include <dev/ppbus/ppbconf.h> 56 #include <dev/ppbus/ppb_msq.h> 57 58 #include <dev/ppc/ppcvar.h> 59 #include <dev/ppc/ppcreg.h> 60 61 #include "ppbus_if.h" 62 63 static void ppcintr(void *arg); 64 65 #define IO_LPTSIZE_EXTENDED 8 /* "Extended" LPT controllers */ 66 #define IO_LPTSIZE_NORMAL 4 /* "Normal" LPT controllers */ 67 68 #define LOG_PPC(function, ppc, string) \ 69 if (bootverbose) printf("%s: %s\n", function, string) 70 71 #define DEVTOSOFTC(dev) ((struct ppc_data *)device_get_softc(dev)) 72 73 /* 74 * We use critical enter/exit for the simple config locking needed to 75 * detect the devices. We just want to make sure that both of our writes 76 * happen without someone else also writing to those config registers. Since 77 * we just do this at startup, Giant keeps multiple threads from executing, 78 * and critical_enter() then is all that's needed to keep us from being preempted 79 * during the critical sequences with the hardware. 80 * 81 * Note: this doesn't prevent multiple threads from putting the chips into 82 * config mode, but since we only do that to detect the type at startup the 83 * extra overhead isn't needed since Giant protects us from multiple entry 84 * and no other code changes these registers. 85 */ 86 #define PPC_CONFIG_LOCK(ppc) critical_enter() 87 #define PPC_CONFIG_UNLOCK(ppc) critical_exit() 88 89 const char ppc_driver_name[] = "ppc"; 90 91 static char *ppc_models[] = { 92 "SMC-like", "SMC FDC37C665GT", "SMC FDC37C666GT", "PC87332", "PC87306", 93 "82091AA", "Generic", "W83877F", "W83877AF", "Winbond", "PC87334", 94 "SMC FDC37C935", "PC87303", 0 95 }; 96 97 /* list of available modes */ 98 static char *ppc_avms[] = { 99 "COMPATIBLE", "NIBBLE-only", "PS2-only", "PS2/NIBBLE", "EPP-only", 100 "EPP/NIBBLE", "EPP/PS2", "EPP/PS2/NIBBLE", "ECP-only", 101 "ECP/NIBBLE", "ECP/PS2", "ECP/PS2/NIBBLE", "ECP/EPP", 102 "ECP/EPP/NIBBLE", "ECP/EPP/PS2", "ECP/EPP/PS2/NIBBLE", 0 103 }; 104 105 /* list of current executing modes 106 * Note that few modes do not actually exist. 107 */ 108 static char *ppc_modes[] = { 109 "COMPATIBLE", "NIBBLE", "PS/2", "PS/2", "EPP", 110 "EPP", "EPP", "EPP", "ECP", 111 "ECP", "ECP+PS2", "ECP+PS2", "ECP+EPP", 112 "ECP+EPP", "ECP+EPP", "ECP+EPP", 0 113 }; 114 115 static char *ppc_epp_protocol[] = { " (EPP 1.9)", " (EPP 1.7)", 0 }; 116 117 #ifdef __i386__ 118 /* 119 * BIOS printer list - used by BIOS probe. 120 */ 121 #define BIOS_PPC_PORTS 0x408 122 #define BIOS_PORTS ((short *)BIOS_PADDRTOVADDR(BIOS_PPC_PORTS)) 123 #define BIOS_MAX_PPC 4 124 #endif 125 126 /* 127 * ppc_ecp_sync() XXX 128 */ 129 int 130 ppc_ecp_sync(device_t dev) 131 { 132 int i, r; 133 struct ppc_data *ppc = DEVTOSOFTC(dev); 134 135 PPC_ASSERT_LOCKED(ppc); 136 if (!(ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_dtm & PPB_ECP)) 137 return 0; 138 139 r = r_ecr(ppc); 140 if ((r & 0xe0) != PPC_ECR_EPP) 141 return 0; 142 143 for (i = 0; i < 100; i++) { 144 r = r_ecr(ppc); 145 if (r & 0x1) 146 return 0; 147 DELAY(100); 148 } 149 150 device_printf(dev, "ECP sync failed as data still present in FIFO.\n"); 151 152 return 0; 153 } 154 155 /* 156 * ppc_detect_fifo() 157 * 158 * Detect parallel port FIFO 159 */ 160 static int 161 ppc_detect_fifo(struct ppc_data *ppc) 162 { 163 char ecr_sav; 164 char ctr_sav, ctr; 165 short i; 166 167 /* save registers */ 168 ecr_sav = r_ecr(ppc); 169 ctr_sav = r_ctr(ppc); 170 171 /* enter ECP configuration mode, no interrupt, no DMA */ 172 w_ecr(ppc, 0xf4); 173 174 /* read PWord size - transfers in FIFO mode must be PWord aligned */ 175 ppc->ppc_pword = (r_cnfgA(ppc) & PPC_PWORD_MASK); 176 177 /* XXX 16 and 32 bits implementations not supported */ 178 if (ppc->ppc_pword != PPC_PWORD_8) { 179 LOG_PPC(__func__, ppc, "PWord not supported"); 180 goto error; 181 } 182 183 w_ecr(ppc, 0x34); /* byte mode, no interrupt, no DMA */ 184 ctr = r_ctr(ppc); 185 w_ctr(ppc, ctr | PCD); /* set direction to 1 */ 186 187 /* enter ECP test mode, no interrupt, no DMA */ 188 w_ecr(ppc, 0xd4); 189 190 /* flush the FIFO */ 191 for (i=0; i<1024; i++) { 192 if (r_ecr(ppc) & PPC_FIFO_EMPTY) 193 break; 194 r_fifo(ppc); 195 } 196 197 if (i >= 1024) { 198 LOG_PPC(__func__, ppc, "can't flush FIFO"); 199 goto error; 200 } 201 202 /* enable interrupts, no DMA */ 203 w_ecr(ppc, 0xd0); 204 205 /* determine readIntrThreshold 206 * fill the FIFO until serviceIntr is set 207 */ 208 for (i=0; i<1024; i++) { 209 w_fifo(ppc, (char)i); 210 if (!ppc->ppc_rthr && (r_ecr(ppc) & PPC_SERVICE_INTR)) { 211 /* readThreshold reached */ 212 ppc->ppc_rthr = i+1; 213 } 214 if (r_ecr(ppc) & PPC_FIFO_FULL) { 215 ppc->ppc_fifo = i+1; 216 break; 217 } 218 } 219 220 if (i >= 1024) { 221 LOG_PPC(__func__, ppc, "can't fill FIFO"); 222 goto error; 223 } 224 225 w_ecr(ppc, 0xd4); /* test mode, no interrupt, no DMA */ 226 w_ctr(ppc, ctr & ~PCD); /* set direction to 0 */ 227 w_ecr(ppc, 0xd0); /* enable interrupts */ 228 229 /* determine writeIntrThreshold 230 * empty the FIFO until serviceIntr is set 231 */ 232 for (i=ppc->ppc_fifo; i>0; i--) { 233 if (r_fifo(ppc) != (char)(ppc->ppc_fifo-i)) { 234 LOG_PPC(__func__, ppc, "invalid data in FIFO"); 235 goto error; 236 } 237 if (r_ecr(ppc) & PPC_SERVICE_INTR) { 238 /* writeIntrThreshold reached */ 239 ppc->ppc_wthr = ppc->ppc_fifo - i+1; 240 } 241 /* if FIFO empty before the last byte, error */ 242 if (i>1 && (r_ecr(ppc) & PPC_FIFO_EMPTY)) { 243 LOG_PPC(__func__, ppc, "data lost in FIFO"); 244 goto error; 245 } 246 } 247 248 /* FIFO must be empty after the last byte */ 249 if (!(r_ecr(ppc) & PPC_FIFO_EMPTY)) { 250 LOG_PPC(__func__, ppc, "can't empty the FIFO"); 251 goto error; 252 } 253 254 w_ctr(ppc, ctr_sav); 255 w_ecr(ppc, ecr_sav); 256 257 return (0); 258 259 error: 260 w_ctr(ppc, ctr_sav); 261 w_ecr(ppc, ecr_sav); 262 263 return (EINVAL); 264 } 265 266 static int 267 ppc_detect_port(struct ppc_data *ppc) 268 { 269 270 w_ctr(ppc, 0x0c); /* To avoid missing PS2 ports */ 271 w_dtr(ppc, 0xaa); 272 if (r_dtr(ppc) != 0xaa) 273 return (0); 274 275 return (1); 276 } 277 278 /* 279 * EPP timeout, according to the PC87332 manual 280 * Semantics of clearing EPP timeout bit. 281 * PC87332 - reading SPP_STR does it... 282 * SMC - write 1 to EPP timeout bit XXX 283 * Others - (?) write 0 to EPP timeout bit 284 */ 285 static void 286 ppc_reset_epp_timeout(struct ppc_data *ppc) 287 { 288 char r; 289 290 r = r_str(ppc); 291 w_str(ppc, r | 0x1); 292 w_str(ppc, r & 0xfe); 293 294 return; 295 } 296 297 static int 298 ppc_check_epp_timeout(struct ppc_data *ppc) 299 { 300 ppc_reset_epp_timeout(ppc); 301 302 return (!(r_str(ppc) & TIMEOUT)); 303 } 304 305 /* 306 * Configure current operating mode 307 */ 308 static int 309 ppc_generic_setmode(struct ppc_data *ppc, int mode) 310 { 311 u_char ecr = 0; 312 313 /* check if mode is available */ 314 if (mode && !(ppc->ppc_avm & mode)) 315 return (EINVAL); 316 317 /* if ECP mode, configure ecr register */ 318 if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { 319 /* return to byte mode (keeping direction bit), 320 * no interrupt, no DMA to be able to change to 321 * ECP 322 */ 323 w_ecr(ppc, PPC_ECR_RESET); 324 ecr = PPC_DISABLE_INTR; 325 326 if (mode & PPB_EPP) 327 return (EINVAL); 328 else if (mode & PPB_ECP) 329 /* select ECP mode */ 330 ecr |= PPC_ECR_ECP; 331 else if (mode & PPB_PS2) 332 /* select PS2 mode with ECP */ 333 ecr |= PPC_ECR_PS2; 334 else 335 /* select COMPATIBLE/NIBBLE mode */ 336 ecr |= PPC_ECR_STD; 337 338 w_ecr(ppc, ecr); 339 } 340 341 ppc->ppc_mode = mode; 342 343 return (0); 344 } 345 346 /* 347 * The ppc driver is free to choose options like FIFO or DMA 348 * if ECP mode is available. 349 * 350 * The 'RAW' option allows the upper drivers to force the ppc mode 351 * even with FIFO, DMA available. 352 */ 353 static int 354 ppc_smclike_setmode(struct ppc_data *ppc, int mode) 355 { 356 u_char ecr = 0; 357 358 /* check if mode is available */ 359 if (mode && !(ppc->ppc_avm & mode)) 360 return (EINVAL); 361 362 /* if ECP mode, configure ecr register */ 363 if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { 364 /* return to byte mode (keeping direction bit), 365 * no interrupt, no DMA to be able to change to 366 * ECP or EPP mode 367 */ 368 w_ecr(ppc, PPC_ECR_RESET); 369 ecr = PPC_DISABLE_INTR; 370 371 if (mode & PPB_EPP) 372 /* select EPP mode */ 373 ecr |= PPC_ECR_EPP; 374 else if (mode & PPB_ECP) 375 /* select ECP mode */ 376 ecr |= PPC_ECR_ECP; 377 else if (mode & PPB_PS2) 378 /* select PS2 mode with ECP */ 379 ecr |= PPC_ECR_PS2; 380 else 381 /* select COMPATIBLE/NIBBLE mode */ 382 ecr |= PPC_ECR_STD; 383 384 w_ecr(ppc, ecr); 385 } 386 387 ppc->ppc_mode = mode; 388 389 return (0); 390 } 391 392 #ifdef PPC_PROBE_CHIPSET 393 /* 394 * ppc_pc873xx_detect 395 * 396 * Probe for a Natsemi PC873xx-family part. 397 * 398 * References in this function are to the National Semiconductor 399 * PC87332 datasheet TL/C/11930, May 1995 revision. 400 */ 401 static int pc873xx_basetab[] = {0x0398, 0x026e, 0x015c, 0x002e, 0}; 402 static int pc873xx_porttab[] = {0x0378, 0x03bc, 0x0278, 0}; 403 static int pc873xx_irqtab[] = {5, 7, 5, 0}; 404 405 static int pc873xx_regstab[] = { 406 PC873_FER, PC873_FAR, PC873_PTR, 407 PC873_FCR, PC873_PCR, PC873_PMC, 408 PC873_TUP, PC873_SID, PC873_PNP0, 409 PC873_PNP1, PC873_LPTBA, -1 410 }; 411 412 static char *pc873xx_rnametab[] = { 413 "FER", "FAR", "PTR", "FCR", "PCR", 414 "PMC", "TUP", "SID", "PNP0", "PNP1", 415 "LPTBA", NULL 416 }; 417 418 static int 419 ppc_pc873xx_detect(struct ppc_data *ppc, int chipset_mode) /* XXX mode never forced */ 420 { 421 static int index = 0; 422 int idport, irq; 423 int ptr, pcr, val, i; 424 425 while ((idport = pc873xx_basetab[index++])) { 426 /* XXX should check first to see if this location is already claimed */ 427 428 /* 429 * Pull the 873xx through the power-on ID cycle (2.2,1.). 430 * We can't use this to locate the chip as it may already have 431 * been used by the BIOS. 432 */ 433 (void)inb(idport); (void)inb(idport); 434 (void)inb(idport); (void)inb(idport); 435 436 /* 437 * Read the SID byte. Possible values are : 438 * 439 * 01010xxx PC87334 440 * 0001xxxx PC87332 441 * 01110xxx PC87306 442 * 00110xxx PC87303 443 */ 444 outb(idport, PC873_SID); 445 val = inb(idport + 1); 446 if ((val & 0xf0) == 0x10) { 447 ppc->ppc_model = NS_PC87332; 448 } else if ((val & 0xf8) == 0x70) { 449 ppc->ppc_model = NS_PC87306; 450 } else if ((val & 0xf8) == 0x50) { 451 ppc->ppc_model = NS_PC87334; 452 } else if ((val & 0xf8) == 0x40) { /* Should be 0x30 by the 453 documentation, but probing 454 yielded 0x40... */ 455 ppc->ppc_model = NS_PC87303; 456 } else { 457 if (bootverbose && (val != 0xff)) 458 printf("PC873xx probe at 0x%x got unknown ID 0x%x\n", idport, val); 459 continue ; /* not recognised */ 460 } 461 462 /* print registers */ 463 if (bootverbose) { 464 printf("PC873xx"); 465 for (i=0; pc873xx_regstab[i] != -1; i++) { 466 outb(idport, pc873xx_regstab[i]); 467 printf(" %s=0x%x", pc873xx_rnametab[i], 468 inb(idport + 1) & 0xff); 469 } 470 printf("\n"); 471 } 472 473 /* 474 * We think we have one. Is it enabled and where we want it to be? 475 */ 476 outb(idport, PC873_FER); 477 val = inb(idport + 1); 478 if (!(val & PC873_PPENABLE)) { 479 if (bootverbose) 480 printf("PC873xx parallel port disabled\n"); 481 continue; 482 } 483 outb(idport, PC873_FAR); 484 val = inb(idport + 1); 485 /* XXX we should create a driver instance for every port found */ 486 if (pc873xx_porttab[val & 0x3] != ppc->ppc_base) { 487 /* First try to change the port address to that requested... */ 488 489 switch (ppc->ppc_base) { 490 case 0x378: 491 val &= 0xfc; 492 break; 493 494 case 0x3bc: 495 val &= 0xfd; 496 break; 497 498 case 0x278: 499 val &= 0xfe; 500 break; 501 502 default: 503 val &= 0xfd; 504 break; 505 } 506 507 outb(idport, PC873_FAR); 508 outb(idport + 1, val); 509 outb(idport + 1, val); 510 511 /* Check for success by reading back the value we supposedly 512 wrote and comparing...*/ 513 514 outb(idport, PC873_FAR); 515 val = inb(idport + 1) & 0x3; 516 517 /* If we fail, report the failure... */ 518 519 if (pc873xx_porttab[val] != ppc->ppc_base) { 520 if (bootverbose) 521 printf("PC873xx at 0x%x not for driver at port 0x%x\n", 522 pc873xx_porttab[val], ppc->ppc_base); 523 } 524 continue; 525 } 526 527 outb(idport, PC873_PTR); 528 ptr = inb(idport + 1); 529 530 /* get irq settings */ 531 if (ppc->ppc_base == 0x378) 532 irq = (ptr & PC873_LPTBIRQ7) ? 7 : 5; 533 else 534 irq = pc873xx_irqtab[val]; 535 536 if (bootverbose) 537 printf("PC873xx irq %d at 0x%x\n", irq, ppc->ppc_base); 538 539 /* 540 * Check if irq settings are correct 541 */ 542 if (irq != ppc->ppc_irq) { 543 /* 544 * If the chipset is not locked and base address is 0x378, 545 * we have another chance 546 */ 547 if (ppc->ppc_base == 0x378 && !(ptr & PC873_CFGLOCK)) { 548 if (ppc->ppc_irq == 7) { 549 outb(idport + 1, (ptr | PC873_LPTBIRQ7)); 550 outb(idport + 1, (ptr | PC873_LPTBIRQ7)); 551 } else { 552 outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); 553 outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); 554 } 555 if (bootverbose) 556 printf("PC873xx irq set to %d\n", ppc->ppc_irq); 557 } else { 558 if (bootverbose) 559 printf("PC873xx sorry, can't change irq setting\n"); 560 } 561 } else { 562 if (bootverbose) 563 printf("PC873xx irq settings are correct\n"); 564 } 565 566 outb(idport, PC873_PCR); 567 pcr = inb(idport + 1); 568 569 if ((ptr & PC873_CFGLOCK) || !chipset_mode) { 570 if (bootverbose) 571 printf("PC873xx %s", (ptr & PC873_CFGLOCK)?"locked":"unlocked"); 572 573 ppc->ppc_avm |= PPB_NIBBLE; 574 if (bootverbose) 575 printf(", NIBBLE"); 576 577 if (pcr & PC873_EPPEN) { 578 ppc->ppc_avm |= PPB_EPP; 579 580 if (bootverbose) 581 printf(", EPP"); 582 583 if (pcr & PC873_EPP19) 584 ppc->ppc_epp = EPP_1_9; 585 else 586 ppc->ppc_epp = EPP_1_7; 587 588 if ((ppc->ppc_model == NS_PC87332) && bootverbose) { 589 outb(idport, PC873_PTR); 590 ptr = inb(idport + 1); 591 if (ptr & PC873_EPPRDIR) 592 printf(", Regular mode"); 593 else 594 printf(", Automatic mode"); 595 } 596 } else if (pcr & PC873_ECPEN) { 597 ppc->ppc_avm |= PPB_ECP; 598 if (bootverbose) 599 printf(", ECP"); 600 601 if (pcr & PC873_ECPCLK) { /* XXX */ 602 ppc->ppc_avm |= PPB_PS2; 603 if (bootverbose) 604 printf(", PS/2"); 605 } 606 } else { 607 outb(idport, PC873_PTR); 608 ptr = inb(idport + 1); 609 if (ptr & PC873_EXTENDED) { 610 ppc->ppc_avm |= PPB_SPP; 611 if (bootverbose) 612 printf(", SPP"); 613 } 614 } 615 } else { 616 if (bootverbose) 617 printf("PC873xx unlocked"); 618 619 if (chipset_mode & PPB_ECP) { 620 if ((chipset_mode & PPB_EPP) && bootverbose) 621 printf(", ECP+EPP not supported"); 622 623 pcr &= ~PC873_EPPEN; 624 pcr |= (PC873_ECPEN | PC873_ECPCLK); /* XXX */ 625 outb(idport + 1, pcr); 626 outb(idport + 1, pcr); 627 628 if (bootverbose) 629 printf(", ECP"); 630 631 } else if (chipset_mode & PPB_EPP) { 632 pcr &= ~(PC873_ECPEN | PC873_ECPCLK); 633 pcr |= (PC873_EPPEN | PC873_EPP19); 634 outb(idport + 1, pcr); 635 outb(idport + 1, pcr); 636 637 ppc->ppc_epp = EPP_1_9; /* XXX */ 638 639 if (bootverbose) 640 printf(", EPP1.9"); 641 642 /* enable automatic direction turnover */ 643 if (ppc->ppc_model == NS_PC87332) { 644 outb(idport, PC873_PTR); 645 ptr = inb(idport + 1); 646 ptr &= ~PC873_EPPRDIR; 647 outb(idport + 1, ptr); 648 outb(idport + 1, ptr); 649 650 if (bootverbose) 651 printf(", Automatic mode"); 652 } 653 } else { 654 pcr &= ~(PC873_ECPEN | PC873_ECPCLK | PC873_EPPEN); 655 outb(idport + 1, pcr); 656 outb(idport + 1, pcr); 657 658 /* configure extended bit in PTR */ 659 outb(idport, PC873_PTR); 660 ptr = inb(idport + 1); 661 662 if (chipset_mode & PPB_PS2) { 663 ptr |= PC873_EXTENDED; 664 665 if (bootverbose) 666 printf(", PS/2"); 667 668 } else { 669 /* default to NIBBLE mode */ 670 ptr &= ~PC873_EXTENDED; 671 672 if (bootverbose) 673 printf(", NIBBLE"); 674 } 675 outb(idport + 1, ptr); 676 outb(idport + 1, ptr); 677 } 678 679 ppc->ppc_avm = chipset_mode; 680 } 681 682 if (bootverbose) 683 printf("\n"); 684 685 ppc->ppc_type = PPC_TYPE_GENERIC; 686 ppc_generic_setmode(ppc, chipset_mode); 687 688 return(chipset_mode); 689 } 690 return(-1); 691 } 692 693 /* 694 * ppc_smc37c66xgt_detect 695 * 696 * SMC FDC37C66xGT configuration. 697 */ 698 static int 699 ppc_smc37c66xgt_detect(struct ppc_data *ppc, int chipset_mode) 700 { 701 int i; 702 u_char r; 703 int type = -1; 704 int csr = SMC66x_CSR; /* initial value is 0x3F0 */ 705 706 int port_address[] = { -1 /* disabled */ , 0x3bc, 0x378, 0x278 }; 707 708 #define cio csr+1 /* config IO port is either 0x3F1 or 0x371 */ 709 710 /* 711 * Detection: enter configuration mode and read CRD register. 712 */ 713 PPC_CONFIG_LOCK(ppc); 714 outb(csr, SMC665_iCODE); 715 outb(csr, SMC665_iCODE); 716 PPC_CONFIG_UNLOCK(ppc); 717 718 outb(csr, 0xd); 719 if (inb(cio) == 0x65) { 720 type = SMC_37C665GT; 721 goto config; 722 } 723 724 for (i = 0; i < 2; i++) { 725 PPC_CONFIG_LOCK(ppc); 726 outb(csr, SMC666_iCODE); 727 outb(csr, SMC666_iCODE); 728 PPC_CONFIG_UNLOCK(ppc); 729 730 outb(csr, 0xd); 731 if (inb(cio) == 0x66) { 732 type = SMC_37C666GT; 733 break; 734 } 735 736 /* Another chance, CSR may be hard-configured to be at 0x370 */ 737 csr = SMC666_CSR; 738 } 739 740 config: 741 /* 742 * If chipset not found, do not continue. 743 */ 744 if (type == -1) { 745 outb(csr, 0xaa); /* end config mode */ 746 return (-1); 747 } 748 749 /* select CR1 */ 750 outb(csr, 0x1); 751 752 /* read the port's address: bits 0 and 1 of CR1 */ 753 r = inb(cio) & SMC_CR1_ADDR; 754 if (port_address[(int)r] != ppc->ppc_base) { 755 outb(csr, 0xaa); /* end config mode */ 756 return (-1); 757 } 758 759 ppc->ppc_model = type; 760 761 /* 762 * CR1 and CR4 registers bits 3 and 0/1 for mode configuration 763 * If SPP mode is detected, try to set ECP+EPP mode 764 */ 765 766 if (bootverbose) { 767 outb(csr, 0x1); 768 device_printf(ppc->ppc_dev, "SMC registers CR1=0x%x", 769 inb(cio) & 0xff); 770 771 outb(csr, 0x4); 772 printf(" CR4=0x%x", inb(cio) & 0xff); 773 } 774 775 /* select CR1 */ 776 outb(csr, 0x1); 777 778 if (!chipset_mode) { 779 /* autodetect mode */ 780 781 /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ 782 if (type == SMC_37C666GT) { 783 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 784 if (bootverbose) 785 printf(" configuration hardwired, supposing " \ 786 "ECP+EPP SPP"); 787 788 } else 789 if ((inb(cio) & SMC_CR1_MODE) == 0) { 790 /* already in extended parallel port mode, read CR4 */ 791 outb(csr, 0x4); 792 r = (inb(cio) & SMC_CR4_EMODE); 793 794 switch (r) { 795 case SMC_SPP: 796 ppc->ppc_avm |= PPB_SPP; 797 if (bootverbose) 798 printf(" SPP"); 799 break; 800 801 case SMC_EPPSPP: 802 ppc->ppc_avm |= PPB_EPP | PPB_SPP; 803 if (bootverbose) 804 printf(" EPP SPP"); 805 break; 806 807 case SMC_ECP: 808 ppc->ppc_avm |= PPB_ECP | PPB_SPP; 809 if (bootverbose) 810 printf(" ECP SPP"); 811 break; 812 813 case SMC_ECPEPP: 814 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 815 if (bootverbose) 816 printf(" ECP+EPP SPP"); 817 break; 818 } 819 } else { 820 /* not an extended port mode */ 821 ppc->ppc_avm |= PPB_SPP; 822 if (bootverbose) 823 printf(" SPP"); 824 } 825 826 } else { 827 /* mode forced */ 828 ppc->ppc_avm = chipset_mode; 829 830 /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ 831 if (type == SMC_37C666GT) 832 goto end_detect; 833 834 r = inb(cio); 835 if ((chipset_mode & (PPB_ECP | PPB_EPP)) == 0) { 836 /* do not use ECP when the mode is not forced to */ 837 outb(cio, r | SMC_CR1_MODE); 838 if (bootverbose) 839 printf(" SPP"); 840 } else { 841 /* an extended mode is selected */ 842 outb(cio, r & ~SMC_CR1_MODE); 843 844 /* read CR4 register and reset mode field */ 845 outb(csr, 0x4); 846 r = inb(cio) & ~SMC_CR4_EMODE; 847 848 if (chipset_mode & PPB_ECP) { 849 if (chipset_mode & PPB_EPP) { 850 outb(cio, r | SMC_ECPEPP); 851 if (bootverbose) 852 printf(" ECP+EPP"); 853 } else { 854 outb(cio, r | SMC_ECP); 855 if (bootverbose) 856 printf(" ECP"); 857 } 858 } else { 859 /* PPB_EPP is set */ 860 outb(cio, r | SMC_EPPSPP); 861 if (bootverbose) 862 printf(" EPP SPP"); 863 } 864 } 865 ppc->ppc_avm = chipset_mode; 866 } 867 868 /* set FIFO threshold to 16 */ 869 if (ppc->ppc_avm & PPB_ECP) { 870 /* select CRA */ 871 outb(csr, 0xa); 872 outb(cio, 16); 873 } 874 875 end_detect: 876 877 if (bootverbose) 878 printf ("\n"); 879 880 if (ppc->ppc_avm & PPB_EPP) { 881 /* select CR4 */ 882 outb(csr, 0x4); 883 r = inb(cio); 884 885 /* 886 * Set the EPP protocol... 887 * Low=EPP 1.9 (1284 standard) and High=EPP 1.7 888 */ 889 if (ppc->ppc_epp == EPP_1_9) 890 outb(cio, (r & ~SMC_CR4_EPPTYPE)); 891 else 892 outb(cio, (r | SMC_CR4_EPPTYPE)); 893 } 894 895 outb(csr, 0xaa); /* end config mode */ 896 897 ppc->ppc_type = PPC_TYPE_SMCLIKE; 898 ppc_smclike_setmode(ppc, chipset_mode); 899 900 return (chipset_mode); 901 } 902 903 /* 904 * SMC FDC37C935 configuration 905 * Found on many Alpha machines 906 */ 907 static int 908 ppc_smc37c935_detect(struct ppc_data *ppc, int chipset_mode) 909 { 910 int type = -1; 911 912 PPC_CONFIG_LOCK(ppc); 913 outb(SMC935_CFG, 0x55); /* enter config mode */ 914 outb(SMC935_CFG, 0x55); 915 PPC_CONFIG_UNLOCK(ppc); 916 917 outb(SMC935_IND, SMC935_ID); /* check device id */ 918 if (inb(SMC935_DAT) == 0x2) 919 type = SMC_37C935; 920 921 if (type == -1) { 922 outb(SMC935_CFG, 0xaa); /* exit config mode */ 923 return (-1); 924 } 925 926 ppc->ppc_model = type; 927 928 outb(SMC935_IND, SMC935_LOGDEV); /* select parallel port, */ 929 outb(SMC935_DAT, 3); /* which is logical device 3 */ 930 931 /* set io port base */ 932 outb(SMC935_IND, SMC935_PORTHI); 933 outb(SMC935_DAT, (u_char)((ppc->ppc_base & 0xff00) >> 8)); 934 outb(SMC935_IND, SMC935_PORTLO); 935 outb(SMC935_DAT, (u_char)(ppc->ppc_base & 0xff)); 936 937 if (!chipset_mode) 938 ppc->ppc_avm = PPB_COMPATIBLE; /* default mode */ 939 else { 940 ppc->ppc_avm = chipset_mode; 941 outb(SMC935_IND, SMC935_PPMODE); 942 outb(SMC935_DAT, SMC935_CENT); /* start in compatible mode */ 943 944 /* SPP + EPP or just plain SPP */ 945 if (chipset_mode & (PPB_SPP)) { 946 if (chipset_mode & PPB_EPP) { 947 if (ppc->ppc_epp == EPP_1_9) { 948 outb(SMC935_IND, SMC935_PPMODE); 949 outb(SMC935_DAT, SMC935_EPP19SPP); 950 } 951 if (ppc->ppc_epp == EPP_1_7) { 952 outb(SMC935_IND, SMC935_PPMODE); 953 outb(SMC935_DAT, SMC935_EPP17SPP); 954 } 955 } else { 956 outb(SMC935_IND, SMC935_PPMODE); 957 outb(SMC935_DAT, SMC935_SPP); 958 } 959 } 960 961 /* ECP + EPP or just plain ECP */ 962 if (chipset_mode & PPB_ECP) { 963 if (chipset_mode & PPB_EPP) { 964 if (ppc->ppc_epp == EPP_1_9) { 965 outb(SMC935_IND, SMC935_PPMODE); 966 outb(SMC935_DAT, SMC935_ECPEPP19); 967 } 968 if (ppc->ppc_epp == EPP_1_7) { 969 outb(SMC935_IND, SMC935_PPMODE); 970 outb(SMC935_DAT, SMC935_ECPEPP17); 971 } 972 } else { 973 outb(SMC935_IND, SMC935_PPMODE); 974 outb(SMC935_DAT, SMC935_ECP); 975 } 976 } 977 } 978 979 outb(SMC935_CFG, 0xaa); /* exit config mode */ 980 981 ppc->ppc_type = PPC_TYPE_SMCLIKE; 982 ppc_smclike_setmode(ppc, chipset_mode); 983 984 return (chipset_mode); 985 } 986 987 /* 988 * Winbond W83877F stuff 989 * 990 * EFER: extended function enable register 991 * EFIR: extended function index register 992 * EFDR: extended function data register 993 */ 994 #define efir ((efer == 0x250) ? 0x251 : 0x3f0) 995 #define efdr ((efer == 0x250) ? 0x252 : 0x3f1) 996 997 static int w83877f_efers[] = { 0x250, 0x3f0, 0x3f0, 0x250 }; 998 static int w83877f_keys[] = { 0x89, 0x86, 0x87, 0x88 }; 999 static int w83877f_keyiter[] = { 1, 2, 2, 1 }; 1000 static int w83877f_hefs[] = { WINB_HEFERE, WINB_HEFRAS, WINB_HEFERE | WINB_HEFRAS, 0 }; 1001 1002 static int 1003 ppc_w83877f_detect(struct ppc_data *ppc, int chipset_mode) 1004 { 1005 int i, j, efer; 1006 unsigned char r, hefere, hefras; 1007 1008 for (i = 0; i < 4; i ++) { 1009 /* first try to enable configuration registers */ 1010 efer = w83877f_efers[i]; 1011 1012 /* write the key to the EFER */ 1013 for (j = 0; j < w83877f_keyiter[i]; j ++) 1014 outb (efer, w83877f_keys[i]); 1015 1016 /* then check HEFERE and HEFRAS bits */ 1017 outb (efir, 0x0c); 1018 hefere = inb(efdr) & WINB_HEFERE; 1019 1020 outb (efir, 0x16); 1021 hefras = inb(efdr) & WINB_HEFRAS; 1022 1023 /* 1024 * HEFRAS HEFERE 1025 * 0 1 write 89h to 250h (power-on default) 1026 * 1 0 write 86h twice to 3f0h 1027 * 1 1 write 87h twice to 3f0h 1028 * 0 0 write 88h to 250h 1029 */ 1030 if ((hefere | hefras) == w83877f_hefs[i]) 1031 goto found; 1032 } 1033 1034 return (-1); /* failed */ 1035 1036 found: 1037 /* check base port address - read from CR23 */ 1038 outb(efir, 0x23); 1039 if (ppc->ppc_base != inb(efdr) * 4) /* 4 bytes boundaries */ 1040 return (-1); 1041 1042 /* read CHIP ID from CR9/bits0-3 */ 1043 outb(efir, 0x9); 1044 1045 switch (inb(efdr) & WINB_CHIPID) { 1046 case WINB_W83877F_ID: 1047 ppc->ppc_model = WINB_W83877F; 1048 break; 1049 1050 case WINB_W83877AF_ID: 1051 ppc->ppc_model = WINB_W83877AF; 1052 break; 1053 1054 default: 1055 ppc->ppc_model = WINB_UNKNOWN; 1056 } 1057 1058 if (bootverbose) { 1059 /* dump of registers */ 1060 device_printf(ppc->ppc_dev, "0x%x - ", w83877f_keys[i]); 1061 for (i = 0; i <= 0xd; i ++) { 1062 outb(efir, i); 1063 printf("0x%x ", inb(efdr)); 1064 } 1065 for (i = 0x10; i <= 0x17; i ++) { 1066 outb(efir, i); 1067 printf("0x%x ", inb(efdr)); 1068 } 1069 outb(efir, 0x1e); 1070 printf("0x%x ", inb(efdr)); 1071 for (i = 0x20; i <= 0x29; i ++) { 1072 outb(efir, i); 1073 printf("0x%x ", inb(efdr)); 1074 } 1075 printf("\n"); 1076 } 1077 1078 ppc->ppc_type = PPC_TYPE_GENERIC; 1079 1080 if (!chipset_mode) { 1081 /* autodetect mode */ 1082 1083 /* select CR0 */ 1084 outb(efir, 0x0); 1085 r = inb(efdr) & (WINB_PRTMODS0 | WINB_PRTMODS1); 1086 1087 /* select CR9 */ 1088 outb(efir, 0x9); 1089 r |= (inb(efdr) & WINB_PRTMODS2); 1090 1091 switch (r) { 1092 case WINB_W83757: 1093 if (bootverbose) 1094 device_printf(ppc->ppc_dev, 1095 "W83757 compatible mode\n"); 1096 return (-1); /* generic or SMC-like */ 1097 1098 case WINB_EXTFDC: 1099 case WINB_EXTADP: 1100 case WINB_EXT2FDD: 1101 case WINB_JOYSTICK: 1102 if (bootverbose) 1103 device_printf(ppc->ppc_dev, 1104 "not in parallel port mode\n"); 1105 return (-1); 1106 1107 case (WINB_PARALLEL | WINB_EPP_SPP): 1108 ppc->ppc_avm |= PPB_EPP | PPB_SPP; 1109 if (bootverbose) 1110 device_printf(ppc->ppc_dev, "EPP SPP\n"); 1111 break; 1112 1113 case (WINB_PARALLEL | WINB_ECP): 1114 ppc->ppc_avm |= PPB_ECP | PPB_SPP; 1115 if (bootverbose) 1116 device_printf(ppc->ppc_dev, "ECP SPP\n"); 1117 break; 1118 1119 case (WINB_PARALLEL | WINB_ECP_EPP): 1120 ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; 1121 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1122 1123 if (bootverbose) 1124 device_printf(ppc->ppc_dev, "ECP+EPP SPP\n"); 1125 break; 1126 default: 1127 printf("%s: unknown case (0x%x)!\n", __func__, r); 1128 } 1129 1130 } else { 1131 /* mode forced */ 1132 1133 /* select CR9 and set PRTMODS2 bit */ 1134 outb(efir, 0x9); 1135 outb(efdr, inb(efdr) & ~WINB_PRTMODS2); 1136 1137 /* select CR0 and reset PRTMODSx bits */ 1138 outb(efir, 0x0); 1139 outb(efdr, inb(efdr) & ~(WINB_PRTMODS0 | WINB_PRTMODS1)); 1140 1141 if (chipset_mode & PPB_ECP) { 1142 if (chipset_mode & PPB_EPP) { 1143 outb(efdr, inb(efdr) | WINB_ECP_EPP); 1144 if (bootverbose) 1145 device_printf(ppc->ppc_dev, 1146 "ECP+EPP\n"); 1147 1148 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1149 1150 } else { 1151 outb(efdr, inb(efdr) | WINB_ECP); 1152 if (bootverbose) 1153 device_printf(ppc->ppc_dev, "ECP\n"); 1154 } 1155 } else { 1156 /* select EPP_SPP otherwise */ 1157 outb(efdr, inb(efdr) | WINB_EPP_SPP); 1158 if (bootverbose) 1159 device_printf(ppc->ppc_dev, "EPP SPP\n"); 1160 } 1161 ppc->ppc_avm = chipset_mode; 1162 } 1163 1164 /* exit configuration mode */ 1165 outb(efer, 0xaa); 1166 1167 switch (ppc->ppc_type) { 1168 case PPC_TYPE_SMCLIKE: 1169 ppc_smclike_setmode(ppc, chipset_mode); 1170 break; 1171 default: 1172 ppc_generic_setmode(ppc, chipset_mode); 1173 break; 1174 } 1175 1176 return (chipset_mode); 1177 } 1178 #endif 1179 1180 /* 1181 * ppc_generic_detect 1182 */ 1183 static int 1184 ppc_generic_detect(struct ppc_data *ppc, int chipset_mode) 1185 { 1186 /* default to generic */ 1187 ppc->ppc_type = PPC_TYPE_GENERIC; 1188 1189 if (bootverbose) 1190 device_printf(ppc->ppc_dev, "SPP"); 1191 1192 /* first, check for ECP */ 1193 w_ecr(ppc, PPC_ECR_PS2); 1194 if ((r_ecr(ppc) & 0xe0) == PPC_ECR_PS2) { 1195 ppc->ppc_dtm |= PPB_ECP | PPB_SPP; 1196 if (bootverbose) 1197 printf(" ECP "); 1198 1199 /* search for SMC style ECP+EPP mode */ 1200 w_ecr(ppc, PPC_ECR_EPP); 1201 } 1202 1203 /* try to reset EPP timeout bit */ 1204 if (ppc_check_epp_timeout(ppc)) { 1205 ppc->ppc_dtm |= PPB_EPP; 1206 1207 if (ppc->ppc_dtm & PPB_ECP) { 1208 /* SMC like chipset found */ 1209 ppc->ppc_model = SMC_LIKE; 1210 ppc->ppc_type = PPC_TYPE_SMCLIKE; 1211 1212 if (bootverbose) 1213 printf(" ECP+EPP"); 1214 } else { 1215 if (bootverbose) 1216 printf(" EPP"); 1217 } 1218 } else { 1219 /* restore to standard mode */ 1220 w_ecr(ppc, PPC_ECR_STD); 1221 } 1222 1223 /* XXX try to detect NIBBLE and PS2 modes */ 1224 ppc->ppc_dtm |= PPB_NIBBLE; 1225 1226 if (chipset_mode) 1227 ppc->ppc_avm = chipset_mode; 1228 else 1229 ppc->ppc_avm = ppc->ppc_dtm; 1230 1231 if (bootverbose) 1232 printf("\n"); 1233 1234 switch (ppc->ppc_type) { 1235 case PPC_TYPE_SMCLIKE: 1236 ppc_smclike_setmode(ppc, chipset_mode); 1237 break; 1238 default: 1239 ppc_generic_setmode(ppc, chipset_mode); 1240 break; 1241 } 1242 1243 return (chipset_mode); 1244 } 1245 1246 /* 1247 * ppc_detect() 1248 * 1249 * mode is the mode suggested at boot 1250 */ 1251 static int 1252 ppc_detect(struct ppc_data *ppc, int chipset_mode) { 1253 #ifdef PPC_PROBE_CHIPSET 1254 int i, mode; 1255 1256 /* list of supported chipsets */ 1257 int (*chipset_detect[])(struct ppc_data *, int) = { 1258 ppc_pc873xx_detect, 1259 ppc_smc37c66xgt_detect, 1260 ppc_w83877f_detect, 1261 ppc_smc37c935_detect, 1262 ppc_generic_detect, 1263 NULL 1264 }; 1265 #endif 1266 1267 /* if can't find the port and mode not forced return error */ 1268 if (!ppc_detect_port(ppc) && chipset_mode == 0) 1269 return (EIO); /* failed, port not present */ 1270 1271 /* assume centronics compatible mode is supported */ 1272 ppc->ppc_avm = PPB_COMPATIBLE; 1273 1274 #ifdef PPC_PROBE_CHIPSET 1275 /* we have to differenciate available chipset modes, 1276 * chipset running modes and IEEE-1284 operating modes 1277 * 1278 * after detection, the port must support running in compatible mode 1279 */ 1280 if (ppc->ppc_flags & 0x40) { 1281 if (bootverbose) 1282 printf("ppc: chipset forced to generic\n"); 1283 #endif 1284 1285 ppc->ppc_mode = ppc_generic_detect(ppc, chipset_mode); 1286 1287 #ifdef PPC_PROBE_CHIPSET 1288 } else { 1289 for (i=0; chipset_detect[i] != NULL; i++) { 1290 if ((mode = chipset_detect[i](ppc, chipset_mode)) != -1) { 1291 ppc->ppc_mode = mode; 1292 break; 1293 } 1294 } 1295 } 1296 #endif 1297 1298 /* configure/detect ECP FIFO */ 1299 if ((ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_flags & 0x80)) 1300 ppc_detect_fifo(ppc); 1301 1302 return (0); 1303 } 1304 1305 /* 1306 * ppc_exec_microseq() 1307 * 1308 * Execute a microsequence. 1309 * Microsequence mechanism is supposed to handle fast I/O operations. 1310 */ 1311 int 1312 ppc_exec_microseq(device_t dev, struct ppb_microseq **p_msq) 1313 { 1314 struct ppc_data *ppc = DEVTOSOFTC(dev); 1315 struct ppb_microseq *mi; 1316 char cc, *p; 1317 int i, iter, len; 1318 int error; 1319 1320 int reg; 1321 char mask; 1322 int accum = 0; 1323 char *ptr = NULL; 1324 1325 struct ppb_microseq *stack = NULL; 1326 1327 /* microsequence registers are equivalent to PC-like port registers */ 1328 1329 #define r_reg(reg,ppc) (bus_read_1((ppc)->res_ioport, reg)) 1330 #define w_reg(reg, ppc, byte) (bus_write_1((ppc)->res_ioport, reg, byte)) 1331 1332 #define INCR_PC (mi ++) /* increment program counter */ 1333 1334 PPC_ASSERT_LOCKED(ppc); 1335 mi = *p_msq; 1336 for (;;) { 1337 switch (mi->opcode) { 1338 case MS_OP_RSET: 1339 cc = r_reg(mi->arg[0].i, ppc); 1340 cc &= (char)mi->arg[2].i; /* clear mask */ 1341 cc |= (char)mi->arg[1].i; /* assert mask */ 1342 w_reg(mi->arg[0].i, ppc, cc); 1343 INCR_PC; 1344 break; 1345 1346 case MS_OP_RASSERT_P: 1347 reg = mi->arg[1].i; 1348 ptr = ppc->ppc_ptr; 1349 1350 if ((len = mi->arg[0].i) == MS_ACCUM) { 1351 accum = ppc->ppc_accum; 1352 for (; accum; accum--) 1353 w_reg(reg, ppc, *ptr++); 1354 ppc->ppc_accum = accum; 1355 } else 1356 for (i=0; i<len; i++) 1357 w_reg(reg, ppc, *ptr++); 1358 ppc->ppc_ptr = ptr; 1359 1360 INCR_PC; 1361 break; 1362 1363 case MS_OP_RFETCH_P: 1364 reg = mi->arg[1].i; 1365 mask = (char)mi->arg[2].i; 1366 ptr = ppc->ppc_ptr; 1367 1368 if ((len = mi->arg[0].i) == MS_ACCUM) { 1369 accum = ppc->ppc_accum; 1370 for (; accum; accum--) 1371 *ptr++ = r_reg(reg, ppc) & mask; 1372 ppc->ppc_accum = accum; 1373 } else 1374 for (i=0; i<len; i++) 1375 *ptr++ = r_reg(reg, ppc) & mask; 1376 ppc->ppc_ptr = ptr; 1377 1378 INCR_PC; 1379 break; 1380 1381 case MS_OP_RFETCH: 1382 *((char *) mi->arg[2].p) = r_reg(mi->arg[0].i, ppc) & 1383 (char)mi->arg[1].i; 1384 INCR_PC; 1385 break; 1386 1387 case MS_OP_RASSERT: 1388 case MS_OP_DELAY: 1389 1390 /* let's suppose the next instr. is the same */ 1391 prefetch: 1392 for (;mi->opcode == MS_OP_RASSERT; INCR_PC) 1393 w_reg(mi->arg[0].i, ppc, (char)mi->arg[1].i); 1394 1395 if (mi->opcode == MS_OP_DELAY) { 1396 DELAY(mi->arg[0].i); 1397 INCR_PC; 1398 goto prefetch; 1399 } 1400 break; 1401 1402 case MS_OP_ADELAY: 1403 if (mi->arg[0].i) { 1404 PPC_UNLOCK(ppc); 1405 pause("ppbdelay", mi->arg[0].i * (hz/1000)); 1406 PPC_LOCK(ppc); 1407 } 1408 INCR_PC; 1409 break; 1410 1411 case MS_OP_TRIG: 1412 reg = mi->arg[0].i; 1413 iter = mi->arg[1].i; 1414 p = (char *)mi->arg[2].p; 1415 1416 /* XXX delay limited to 255 us */ 1417 for (i=0; i<iter; i++) { 1418 w_reg(reg, ppc, *p++); 1419 DELAY((unsigned char)*p++); 1420 } 1421 INCR_PC; 1422 break; 1423 1424 case MS_OP_SET: 1425 ppc->ppc_accum = mi->arg[0].i; 1426 INCR_PC; 1427 break; 1428 1429 case MS_OP_DBRA: 1430 if (--ppc->ppc_accum > 0) 1431 mi += mi->arg[0].i; 1432 INCR_PC; 1433 break; 1434 1435 case MS_OP_BRSET: 1436 cc = r_str(ppc); 1437 if ((cc & (char)mi->arg[0].i) == (char)mi->arg[0].i) 1438 mi += mi->arg[1].i; 1439 INCR_PC; 1440 break; 1441 1442 case MS_OP_BRCLEAR: 1443 cc = r_str(ppc); 1444 if ((cc & (char)mi->arg[0].i) == 0) 1445 mi += mi->arg[1].i; 1446 INCR_PC; 1447 break; 1448 1449 case MS_OP_BRSTAT: 1450 cc = r_str(ppc); 1451 if ((cc & ((char)mi->arg[0].i | (char)mi->arg[1].i)) == 1452 (char)mi->arg[0].i) 1453 mi += mi->arg[2].i; 1454 INCR_PC; 1455 break; 1456 1457 case MS_OP_C_CALL: 1458 /* 1459 * If the C call returns !0 then end the microseq. 1460 * The current state of ptr is passed to the C function 1461 */ 1462 if ((error = mi->arg[0].f(mi->arg[1].p, ppc->ppc_ptr))) 1463 return (error); 1464 1465 INCR_PC; 1466 break; 1467 1468 case MS_OP_PTR: 1469 ppc->ppc_ptr = (char *)mi->arg[0].p; 1470 INCR_PC; 1471 break; 1472 1473 case MS_OP_CALL: 1474 if (stack) 1475 panic("%s: too much calls", __func__); 1476 1477 if (mi->arg[0].p) { 1478 /* store the state of the actual 1479 * microsequence 1480 */ 1481 stack = mi; 1482 1483 /* jump to the new microsequence */ 1484 mi = (struct ppb_microseq *)mi->arg[0].p; 1485 } else 1486 INCR_PC; 1487 1488 break; 1489 1490 case MS_OP_SUBRET: 1491 /* retrieve microseq and pc state before the call */ 1492 mi = stack; 1493 1494 /* reset the stack */ 1495 stack = NULL; 1496 1497 /* XXX return code */ 1498 1499 INCR_PC; 1500 break; 1501 1502 case MS_OP_PUT: 1503 case MS_OP_GET: 1504 case MS_OP_RET: 1505 /* can't return to ppb level during the execution 1506 * of a submicrosequence */ 1507 if (stack) 1508 panic("%s: can't return to ppb level", 1509 __func__); 1510 1511 /* update pc for ppb level of execution */ 1512 *p_msq = mi; 1513 1514 /* return to ppb level of execution */ 1515 return (0); 1516 1517 default: 1518 panic("%s: unknown microsequence opcode 0x%x", 1519 __func__, mi->opcode); 1520 } 1521 } 1522 1523 /* unreached */ 1524 } 1525 1526 static void 1527 ppcintr(void *arg) 1528 { 1529 struct ppc_data *ppc = arg; 1530 u_char ctr, ecr, str; 1531 1532 /* 1533 * If we have any child interrupt handlers registered, let 1534 * them handle this interrupt. 1535 * 1536 * XXX: If DMA is in progress should we just complete that w/o 1537 * doing this? 1538 */ 1539 PPC_LOCK(ppc); 1540 if (ppc->ppc_intr_hook != NULL && 1541 ppc->ppc_intr_hook(ppc->ppc_intr_arg) == 0) { 1542 PPC_UNLOCK(ppc); 1543 return; 1544 } 1545 1546 str = r_str(ppc); 1547 ctr = r_ctr(ppc); 1548 ecr = r_ecr(ppc); 1549 1550 #if defined(PPC_DEBUG) && PPC_DEBUG > 1 1551 printf("![%x/%x/%x]", ctr, ecr, str); 1552 #endif 1553 1554 /* don't use ecp mode with IRQENABLE set */ 1555 if (ctr & IRQENABLE) { 1556 PPC_UNLOCK(ppc); 1557 return; 1558 } 1559 1560 /* interrupts are generated by nFault signal 1561 * only in ECP mode */ 1562 if ((str & nFAULT) && (ppc->ppc_mode & PPB_ECP)) { 1563 /* check if ppc driver has programmed the 1564 * nFault interrupt */ 1565 if (ppc->ppc_irqstat & PPC_IRQ_nFAULT) { 1566 w_ecr(ppc, ecr | PPC_nFAULT_INTR); 1567 ppc->ppc_irqstat &= ~PPC_IRQ_nFAULT; 1568 } else { 1569 /* shall be handled by underlying layers XXX */ 1570 PPC_UNLOCK(ppc); 1571 return; 1572 } 1573 } 1574 1575 if (ppc->ppc_irqstat & PPC_IRQ_DMA) { 1576 /* disable interrupts (should be done by hardware though) */ 1577 w_ecr(ppc, ecr | PPC_SERVICE_INTR); 1578 ppc->ppc_irqstat &= ~PPC_IRQ_DMA; 1579 ecr = r_ecr(ppc); 1580 1581 /* check if DMA completed */ 1582 if ((ppc->ppc_avm & PPB_ECP) && (ecr & PPC_ENABLE_DMA)) { 1583 #ifdef PPC_DEBUG 1584 printf("a"); 1585 #endif 1586 /* stop DMA */ 1587 w_ecr(ppc, ecr & ~PPC_ENABLE_DMA); 1588 ecr = r_ecr(ppc); 1589 1590 if (ppc->ppc_dmastat == PPC_DMA_STARTED) { 1591 #ifdef PPC_DEBUG 1592 printf("d"); 1593 #endif 1594 ppc->ppc_dmadone(ppc); 1595 ppc->ppc_dmastat = PPC_DMA_COMPLETE; 1596 1597 /* wakeup the waiting process */ 1598 wakeup(ppc); 1599 } 1600 } 1601 } else if (ppc->ppc_irqstat & PPC_IRQ_FIFO) { 1602 /* classic interrupt I/O */ 1603 ppc->ppc_irqstat &= ~PPC_IRQ_FIFO; 1604 } 1605 PPC_UNLOCK(ppc); 1606 1607 return; 1608 } 1609 1610 int 1611 ppc_read(device_t dev, char *buf, int len, int mode) 1612 { 1613 return (EINVAL); 1614 } 1615 1616 int 1617 ppc_write(device_t dev, char *buf, int len, int how) 1618 { 1619 return (EINVAL); 1620 } 1621 1622 int 1623 ppc_reset_epp(device_t dev) 1624 { 1625 struct ppc_data *ppc = DEVTOSOFTC(dev); 1626 1627 PPC_ASSERT_LOCKED(ppc); 1628 ppc_reset_epp_timeout(ppc); 1629 1630 return 0; 1631 } 1632 1633 int 1634 ppc_setmode(device_t dev, int mode) 1635 { 1636 struct ppc_data *ppc = DEVTOSOFTC(dev); 1637 1638 PPC_ASSERT_LOCKED(ppc); 1639 switch (ppc->ppc_type) { 1640 case PPC_TYPE_SMCLIKE: 1641 return (ppc_smclike_setmode(ppc, mode)); 1642 break; 1643 1644 case PPC_TYPE_GENERIC: 1645 default: 1646 return (ppc_generic_setmode(ppc, mode)); 1647 break; 1648 } 1649 1650 /* not reached */ 1651 return (ENXIO); 1652 } 1653 1654 int 1655 ppc_probe(device_t dev, int rid) 1656 { 1657 struct ppc_data *ppc; 1658 #ifdef __i386__ 1659 static short next_bios_ppc = 0; 1660 int error; 1661 rman_res_t port; 1662 #endif 1663 1664 /* 1665 * Allocate the ppc_data structure. 1666 */ 1667 ppc = DEVTOSOFTC(dev); 1668 bzero(ppc, sizeof(struct ppc_data)); 1669 1670 ppc->rid_ioport = rid; 1671 1672 #ifdef __i386__ 1673 /* retrieve ISA parameters */ 1674 error = bus_get_resource(dev, SYS_RES_IOPORT, rid, &port, NULL); 1675 1676 /* 1677 * If port not specified, use bios list. 1678 */ 1679 if (error) { 1680 if ((next_bios_ppc < BIOS_MAX_PPC) && 1681 (*(BIOS_PORTS + next_bios_ppc) != 0)) { 1682 port = *(BIOS_PORTS + next_bios_ppc++); 1683 if (bootverbose) 1684 device_printf(dev, 1685 "parallel port found at 0x%jx\n", port); 1686 } else { 1687 device_printf(dev, "parallel port not found.\n"); 1688 return (ENXIO); 1689 } 1690 bus_set_resource(dev, SYS_RES_IOPORT, rid, port, 1691 IO_LPTSIZE_EXTENDED); 1692 } 1693 #endif 1694 1695 /* IO port is mandatory */ 1696 1697 /* Try "extended" IO port range...*/ 1698 ppc->res_ioport = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, 1699 &ppc->rid_ioport, 1700 IO_LPTSIZE_EXTENDED, 1701 RF_ACTIVE); 1702 1703 if (ppc->res_ioport != 0) { 1704 if (bootverbose) 1705 device_printf(dev, "using extended I/O port range\n"); 1706 } else { 1707 /* Failed? If so, then try the "normal" IO port range... */ 1708 ppc->res_ioport = bus_alloc_resource_anywhere(dev, 1709 SYS_RES_IOPORT, 1710 &ppc->rid_ioport, 1711 IO_LPTSIZE_NORMAL, 1712 RF_ACTIVE); 1713 if (ppc->res_ioport != 0) { 1714 if (bootverbose) 1715 device_printf(dev, "using normal I/O port range\n"); 1716 } else { 1717 if (bootverbose) 1718 device_printf(dev, "cannot reserve I/O port range\n"); 1719 goto error; 1720 } 1721 } 1722 1723 ppc->ppc_base = rman_get_start(ppc->res_ioport); 1724 1725 ppc->ppc_flags = device_get_flags(dev); 1726 1727 if (!(ppc->ppc_flags & 0x20)) { 1728 ppc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 1729 &ppc->rid_irq, 1730 RF_SHAREABLE); 1731 ppc->res_drq = bus_alloc_resource_any(dev, SYS_RES_DRQ, 1732 &ppc->rid_drq, 1733 RF_ACTIVE); 1734 } 1735 1736 if (ppc->res_irq) 1737 ppc->ppc_irq = rman_get_start(ppc->res_irq); 1738 if (ppc->res_drq) 1739 ppc->ppc_dmachan = rman_get_start(ppc->res_drq); 1740 1741 ppc->ppc_dev = dev; 1742 ppc->ppc_model = GENERIC; 1743 1744 ppc->ppc_mode = PPB_COMPATIBLE; 1745 ppc->ppc_epp = (ppc->ppc_flags & 0x10) >> 4; 1746 1747 ppc->ppc_type = PPC_TYPE_GENERIC; 1748 1749 /* 1750 * Try to detect the chipset and its mode. 1751 */ 1752 if (ppc_detect(ppc, ppc->ppc_flags & 0xf)) 1753 goto error; 1754 1755 return (0); 1756 1757 error: 1758 if (ppc->res_irq != 0) { 1759 bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, 1760 ppc->res_irq); 1761 } 1762 if (ppc->res_ioport != 0) { 1763 bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, 1764 ppc->res_ioport); 1765 } 1766 if (ppc->res_drq != 0) { 1767 bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, 1768 ppc->res_drq); 1769 } 1770 return (ENXIO); 1771 } 1772 1773 int 1774 ppc_attach(device_t dev) 1775 { 1776 struct ppc_data *ppc = DEVTOSOFTC(dev); 1777 int error; 1778 1779 mtx_init(&ppc->ppc_lock, device_get_nameunit(dev), "ppc", MTX_DEF); 1780 1781 device_printf(dev, "%s chipset (%s) in %s mode%s\n", 1782 ppc_models[ppc->ppc_model], ppc_avms[ppc->ppc_avm], 1783 ppc_modes[ppc->ppc_mode], (PPB_IS_EPP(ppc->ppc_mode)) ? 1784 ppc_epp_protocol[ppc->ppc_epp] : ""); 1785 1786 if (ppc->ppc_fifo) 1787 device_printf(dev, "FIFO with %d/%d/%d bytes threshold\n", 1788 ppc->ppc_fifo, ppc->ppc_wthr, ppc->ppc_rthr); 1789 1790 if (ppc->res_irq) { 1791 /* default to the tty mask for registration */ /* XXX */ 1792 error = bus_setup_intr(dev, ppc->res_irq, INTR_TYPE_TTY | 1793 INTR_MPSAFE, NULL, ppcintr, ppc, &ppc->intr_cookie); 1794 if (error) { 1795 device_printf(dev, 1796 "failed to register interrupt handler: %d\n", 1797 error); 1798 mtx_destroy(&ppc->ppc_lock); 1799 return (error); 1800 } 1801 } 1802 1803 /* add ppbus as a child of this isa to parallel bridge */ 1804 ppc->ppbus = device_add_child(dev, "ppbus", -1); 1805 1806 /* 1807 * Probe the ppbus and attach devices found. 1808 */ 1809 device_probe_and_attach(ppc->ppbus); 1810 1811 return (0); 1812 } 1813 1814 int 1815 ppc_detach(device_t dev) 1816 { 1817 struct ppc_data *ppc = DEVTOSOFTC(dev); 1818 1819 if (ppc->res_irq == 0) { 1820 return (ENXIO); 1821 } 1822 1823 /* detach & delete all children */ 1824 device_delete_children(dev); 1825 1826 if (ppc->res_irq != 0) { 1827 bus_teardown_intr(dev, ppc->res_irq, ppc->intr_cookie); 1828 bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, 1829 ppc->res_irq); 1830 } 1831 if (ppc->res_ioport != 0) { 1832 bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, 1833 ppc->res_ioport); 1834 } 1835 if (ppc->res_drq != 0) { 1836 bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, 1837 ppc->res_drq); 1838 } 1839 1840 mtx_destroy(&ppc->ppc_lock); 1841 1842 return (0); 1843 } 1844 1845 u_char 1846 ppc_io(device_t ppcdev, int iop, u_char *addr, int cnt, u_char byte) 1847 { 1848 struct ppc_data *ppc = DEVTOSOFTC(ppcdev); 1849 1850 PPC_ASSERT_LOCKED(ppc); 1851 switch (iop) { 1852 case PPB_OUTSB_EPP: 1853 bus_write_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); 1854 break; 1855 case PPB_OUTSW_EPP: 1856 bus_write_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); 1857 break; 1858 case PPB_OUTSL_EPP: 1859 bus_write_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); 1860 break; 1861 case PPB_INSB_EPP: 1862 bus_read_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); 1863 break; 1864 case PPB_INSW_EPP: 1865 bus_read_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); 1866 break; 1867 case PPB_INSL_EPP: 1868 bus_read_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); 1869 break; 1870 case PPB_RDTR: 1871 return (r_dtr(ppc)); 1872 case PPB_RSTR: 1873 return (r_str(ppc)); 1874 case PPB_RCTR: 1875 return (r_ctr(ppc)); 1876 case PPB_REPP_A: 1877 return (r_epp_A(ppc)); 1878 case PPB_REPP_D: 1879 return (r_epp_D(ppc)); 1880 case PPB_RECR: 1881 return (r_ecr(ppc)); 1882 case PPB_RFIFO: 1883 return (r_fifo(ppc)); 1884 case PPB_WDTR: 1885 w_dtr(ppc, byte); 1886 break; 1887 case PPB_WSTR: 1888 w_str(ppc, byte); 1889 break; 1890 case PPB_WCTR: 1891 w_ctr(ppc, byte); 1892 break; 1893 case PPB_WEPP_A: 1894 w_epp_A(ppc, byte); 1895 break; 1896 case PPB_WEPP_D: 1897 w_epp_D(ppc, byte); 1898 break; 1899 case PPB_WECR: 1900 w_ecr(ppc, byte); 1901 break; 1902 case PPB_WFIFO: 1903 w_fifo(ppc, byte); 1904 break; 1905 default: 1906 panic("%s: unknown I/O operation", __func__); 1907 break; 1908 } 1909 1910 return (0); /* not significative */ 1911 } 1912 1913 int 1914 ppc_read_ivar(device_t bus, device_t dev, int index, uintptr_t *val) 1915 { 1916 struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); 1917 1918 switch (index) { 1919 case PPC_IVAR_EPP_PROTO: 1920 PPC_ASSERT_LOCKED(ppc); 1921 *val = (u_long)ppc->ppc_epp; 1922 break; 1923 case PPC_IVAR_LOCK: 1924 *val = (uintptr_t)&ppc->ppc_lock; 1925 break; 1926 default: 1927 return (ENOENT); 1928 } 1929 1930 return (0); 1931 } 1932 1933 int 1934 ppc_write_ivar(device_t bus, device_t dev, int index, uintptr_t val) 1935 { 1936 struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); 1937 1938 switch (index) { 1939 case PPC_IVAR_INTR_HANDLER: 1940 PPC_ASSERT_LOCKED(ppc); 1941 if (dev != ppc->ppbus) 1942 return (EINVAL); 1943 if (val == 0) { 1944 ppc->ppc_intr_hook = NULL; 1945 break; 1946 } 1947 if (ppc->ppc_intr_hook != NULL) 1948 return (EBUSY); 1949 ppc->ppc_intr_hook = (void *)val; 1950 ppc->ppc_intr_arg = device_get_softc(dev); 1951 break; 1952 default: 1953 return (ENOENT); 1954 } 1955 1956 return (0); 1957 } 1958 1959 /* 1960 * We allow child devices to allocate an IRQ resource at rid 0 for their 1961 * interrupt handlers. 1962 */ 1963 struct resource * 1964 ppc_alloc_resource(device_t bus, device_t child, int type, int *rid, 1965 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1966 { 1967 struct ppc_data *ppc = DEVTOSOFTC(bus); 1968 1969 switch (type) { 1970 case SYS_RES_IRQ: 1971 if (*rid == 0) 1972 return (ppc->res_irq); 1973 break; 1974 } 1975 return (NULL); 1976 } 1977 1978 int 1979 ppc_release_resource(device_t bus, device_t child, int type, int rid, 1980 struct resource *r) 1981 { 1982 #ifdef INVARIANTS 1983 struct ppc_data *ppc = DEVTOSOFTC(bus); 1984 #endif 1985 1986 switch (type) { 1987 case SYS_RES_IRQ: 1988 if (rid == 0) { 1989 KASSERT(r == ppc->res_irq, 1990 ("ppc child IRQ resource mismatch")); 1991 return (0); 1992 } 1993 break; 1994 } 1995 return (EINVAL); 1996 } 1997 1998 MODULE_DEPEND(ppc, ppbus, 1, 1, 1); 1999