1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 1997, 1998, 1999 Nicolas Souchu 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 * 30 */ 31 #ifndef __PPBCONF_H 32 #define __PPBCONF_H 33 34 #define n(flags) (~(flags) & (flags)) 35 36 /* 37 * Parallel Port Chipset control bits. 38 */ 39 #define STROBE 0x01 40 #define AUTOFEED 0x02 41 #define nINIT 0x04 42 #define SELECTIN 0x08 43 #define IRQENABLE 0x10 44 #define PCD 0x20 45 46 #define nSTROBE n(STROBE) 47 #define nAUTOFEED n(AUTOFEED) 48 #define INIT n(nINIT) 49 #define nSELECTIN n(SELECTIN) 50 #define nPCD n(PCD) 51 52 /* 53 * Parallel Port Chipset status bits. 54 */ 55 #define TIMEOUT 0x01 56 #define nFAULT 0x08 57 #define SELECT 0x10 58 #define PERROR 0x20 59 #define nACK 0x40 60 #define nBUSY 0x80 61 62 #ifdef _KERNEL 63 #include <sys/queue.h> 64 65 /* 66 * Parallel Port Bus sleep/wakeup queue. 67 */ 68 #define PPBPRI (PZERO+8) 69 70 /* 71 * Parallel Port Chipset mode masks. 72 * NIBBLE mode is supposed to be available under each other modes. 73 */ 74 #define PPB_COMPATIBLE 0x0 /* Centronics compatible mode */ 75 76 #define PPB_NIBBLE 0x1 /* reverse 4 bit mode */ 77 #define PPB_PS2 0x2 /* PS/2 byte mode */ 78 #define PPB_EPP 0x4 /* EPP mode, 32 bit */ 79 #define PPB_ECP 0x8 /* ECP mode */ 80 81 /* mode aliases */ 82 #define PPB_SPP PPB_NIBBLE|PPB_PS2 83 #define PPB_BYTE PPB_PS2 84 85 #define PPB_MASK 0x0f 86 #define PPB_OPTIONS_MASK 0xf0 87 88 #define PPB_IS_EPP(mode) (mode & PPB_EPP) 89 #define PPB_IN_EPP_MODE(bus) (PPB_IS_EPP (ppb_get_mode (bus))) 90 #define PPB_IN_NIBBLE_MODE(bus) (ppb_get_mode (bus) & PPB_NIBBLE) 91 #define PPB_IN_PS2_MODE(bus) (ppb_get_mode (bus) & PPB_PS2) 92 93 /* 94 * Structure to store status information. 95 */ 96 struct ppb_status { 97 unsigned char status; 98 99 unsigned int timeout:1; 100 unsigned int error:1; 101 unsigned int select:1; 102 unsigned int paper_end:1; 103 unsigned int ack:1; 104 unsigned int busy:1; 105 }; 106 107 /* Parallel port bus I/O opcodes */ 108 #define PPB_OUTSB_EPP 1 109 #define PPB_OUTSW_EPP 2 110 #define PPB_OUTSL_EPP 3 111 #define PPB_INSB_EPP 4 112 #define PPB_INSW_EPP 5 113 #define PPB_INSL_EPP 6 114 #define PPB_RDTR 7 115 #define PPB_RSTR 8 116 #define PPB_RCTR 9 117 #define PPB_REPP_A 10 118 #define PPB_REPP_D 11 119 #define PPB_RECR 12 120 #define PPB_RFIFO 13 121 #define PPB_WDTR 14 122 #define PPB_WSTR 15 123 #define PPB_WCTR 16 124 #define PPB_WEPP_A 17 125 #define PPB_WEPP_D 18 126 #define PPB_WECR 19 127 #define PPB_WFIFO 20 128 129 /* 130 * How tsleep() is called in ppb_request_bus(). 131 */ 132 #define PPB_DONTWAIT 0 133 #define PPB_NOINTR 0 134 #define PPB_WAIT 0x1 135 #define PPB_INTR 0x2 136 #define PPB_POLL 0x4 137 #define PPB_FOREVER -1 138 139 /* 140 * Microsequence stuff. 141 */ 142 #define PPB_MS_MAXLEN 64 /* XXX according to MS_INS_MASK */ 143 #define PPB_MS_MAXARGS 3 /* according to MS_ARG_MASK */ 144 145 /* maximum number of mode dependent 146 * submicrosequences for in/out operations 147 */ 148 #define PPB_MAX_XFER 6 149 150 union ppb_insarg { 151 int i; 152 void *p; 153 char *c; 154 int (* f)(void *, char *); 155 }; 156 157 struct ppb_microseq { 158 int opcode; /* microins. opcode */ 159 union ppb_insarg arg[PPB_MS_MAXARGS]; /* arguments */ 160 }; 161 162 /* microseqences used for GET/PUT operations */ 163 struct ppb_xfer { 164 struct ppb_microseq *loop; /* the loop microsequence */ 165 }; 166 167 /* 168 * Parallel Port Bus Device structure. 169 */ 170 struct ppb_data; /* see below */ 171 172 struct ppb_context { 173 int valid; /* 1 if the struct is valid */ 174 int mode; /* XXX chipset operating mode */ 175 176 struct microseq *curpc; /* pc in curmsq */ 177 struct microseq *curmsq; /* currently executed microseqence */ 178 }; 179 180 /* 181 * List of IVARS available to ppb device drivers 182 */ 183 #define PPBUS_IVAR_MODE 0 184 185 /* other fields are reserved to the ppbus internals */ 186 187 struct ppb_device { 188 189 const char *name; /* name of the device */ 190 191 u_int flags; /* flags */ 192 193 struct ppb_context ctx; /* context of the device */ 194 195 /* mode dependent get msq. If NULL, 196 * IEEE1284 code is used */ 197 struct ppb_xfer 198 get_xfer[PPB_MAX_XFER]; 199 200 /* mode dependent put msq. If NULL, 201 * IEEE1284 code is used */ 202 struct ppb_xfer 203 put_xfer[PPB_MAX_XFER]; 204 205 driver_intr_t *intr_hook; 206 void *intr_arg; 207 }; 208 209 /* EPP standards */ 210 #define EPP_1_9 0x0 /* default */ 211 #define EPP_1_7 0x1 212 213 /* Parallel Port Chipset IVARS */ /* elsewhere XXX */ 214 #define PPC_IVAR_EPP_PROTO 0 215 #define PPC_IVAR_LOCK 1 216 #define PPC_IVAR_INTR_HANDLER 2 217 218 /* 219 * Maximum size of the PnP info string 220 */ 221 #define PPB_PnP_STRING_SIZE 256 /* XXX */ 222 223 /* 224 * Parallel Port Bus structure. 225 */ 226 struct ppb_data { 227 228 #define PPB_PnP_PRINTER 0 229 #define PPB_PnP_MODEM 1 230 #define PPB_PnP_NET 2 231 #define PPB_PnP_HDC 3 232 #define PPB_PnP_PCMCIA 4 233 #define PPB_PnP_MEDIA 5 234 #define PPB_PnP_FDC 6 235 #define PPB_PnP_PORTS 7 236 #define PPB_PnP_SCANNER 8 237 #define PPB_PnP_DIGICAM 9 238 #define PPB_PnP_UNKNOWN 10 239 int class_id; /* not a PnP device if class_id < 0 */ 240 241 int state; /* current IEEE1284 state */ 242 int error; /* last IEEE1284 error */ 243 244 int mode; /* IEEE 1284-1994 mode 245 * NIBBLE, PS2, EPP or ECP */ 246 247 device_t ppb_owner; /* device which owns the bus */ 248 249 struct mtx *ppc_lock; /* lock of parent device */ 250 struct resource *ppc_irq_res; 251 }; 252 253 struct callout; 254 255 typedef int (*ppc_intr_handler)(void *); 256 257 extern int ppb_attach_device(device_t); 258 extern int ppb_request_bus(device_t, device_t, int); 259 extern int ppb_release_bus(device_t, device_t); 260 261 /* bus related functions */ 262 extern void ppb_lock(device_t); 263 extern void ppb_unlock(device_t); 264 extern void _ppb_assert_locked(device_t, const char *, int); 265 extern void ppb_init_callout(device_t, struct callout *, int); 266 extern int ppb_sleep(device_t, void *, int, const char *, int); 267 extern int ppb_get_status(device_t, struct ppb_status *); 268 extern int ppb_poll_bus(device_t, int, uint8_t, uint8_t, int); 269 extern int ppb_reset_epp_timeout(device_t); 270 extern int ppb_ecp_sync(device_t); 271 extern int ppb_get_epp_protocol(device_t); 272 extern int ppb_set_mode(device_t, int); /* returns old mode */ 273 extern int ppb_get_mode(device_t); /* returns current mode */ 274 extern int ppb_write(device_t, char *, int, int); 275 276 #ifdef INVARIANTS 277 #define ppb_assert_locked(dev) _ppb_assert_locked(dev, __FILE__, __LINE__) 278 #else 279 #define ppb_assert_locked(dev) 280 #endif 281 #endif /* _KERNEL */ 282 283 #endif /* !__PPBCONF_H */ 284