xref: /freebsd/sys/dev/pms/RefTisa/sat/src/smdefs.h (revision 2e3507c25e42292b45a5482e116d278f5515d04d)
1 /*******************************************************************************
2 *Copyright (c) 2014 PMC-Sierra, Inc.  All rights reserved.
3 *
4 *Redistribution and use in source and binary forms, with or without modification, are permitted provided
5 *that the following conditions are met:
6 *1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
7 *following disclaimer.
8 *2. Redistributions in binary form must reproduce the above copyright notice,
9 *this list of conditions and the following disclaimer in the documentation and/or other materials provided
10 *with the distribution.
11 *
12 *THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 *WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
14 *FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
15 *FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
16 *NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
17 *BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
18 *LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
19 *SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
20 *
21 *
22 ********************************************************************************/
23 #ifndef __SMDEFS_H__
24 #define __SMDEFS_H__
25 
26 #include <dev/pms/RefTisa/tisa/sassata/common/ossa.h>
27 
28 /* the index for memory requirement, must be continious */
29 #define SM_ROOT_MEM_INDEX                          0                       /**< the index of dm root memory */
30 #define SM_DEVICE_MEM_INDEX                        1                       /**< the index of Device descriptors memory */
31 #define SM_IO_MEM_INDEX                            2                       /**< the index of IO command descriptors memory */
32 
33 
34 #define SM_MAX_DEV                              256
35 #define SM_MAX_IO                               1024
36 
37 #define SM_USECS_PER_TICK                       1000000                   /**< defines the heart beat of the LL layer 10ms */
38 
39 enum sm_locks_e
40 {
41   SM_TIMER_LOCK = 0,
42   SM_DEVICE_LOCK,
43   SM_INTERNAL_IO_LOCK,
44   SM_EXTERNAL_IO_LOCK,
45   SM_NCQ_TAG_LOCK,
46   SM_TBD_LOCK,
47   SM_MAX_LOCKS
48 };
49 
50 /* ATA device type */
51 #define SATA_ATA_DEVICE                           0x01                       /**< ATA ATA device type */
52 #define SATA_ATAPI_DEVICE                         0x02                       /**< ATA ATAPI device type */
53 #define SATA_PM_DEVICE                            0x03                       /**< ATA PM device type */
54 #define SATA_SEMB_DEVICE                          0x04                       /**< ATA SEMB device type */
55 #define SATA_SEMB_WO_SEP_DEVICE                   0x05                       /**< ATA SEMB without SEP device type */
56 #define UNKNOWN_DEVICE                            0xFF
57 
58 /*
59  *  FIS type
60  */
61 #define PIO_SETUP_DEV_TO_HOST_FIS   0x5F
62 #define REG_DEV_TO_HOST_FIS         0x34
63 #define SET_DEV_BITS_FIS            0xA1
64 
65 /*
66  * ATA Command code
67  */
68 #define SAT_READ_FPDMA_QUEUED                 0x60
69 #define SAT_READ_DMA_EXT                      0x25
70 #define SAT_READ_DMA                          0xC8
71 #define SAT_WRITE_FPDMA_QUEUED                0x61
72 #define SAT_WRITE_DMA_EXT                     0x35
73 #define SAT_WRITE_DMA_FUA_EXT                 0x3D
74 #define SAT_WRITE_DMA                         0xCA
75 #define SAT_CHECK_POWER_MODE                  0xE5
76 #define SAT_READ_LOG_EXT                      0x2F
77 #define SAT_READ_VERIFY_SECTORS               0x40
78 #define SAT_READ_VERIFY_SECTORS_EXT           0x42
79 #define SAT_SMART                             0xB0
80 #define SAT_SMART_EXEUTE_OFF_LINE_IMMEDIATE   0xD4
81 #define SAT_SMART_RETURN_STATUS               0xDA
82 #define SAT_SMART_READ_LOG                    0xD5
83 #define SAT_SMART_ENABLE_OPERATIONS           0xD8
84 #define SAT_SMART_DISABLE_OPERATIONS          0xD9
85 #define SAT_FLUSH_CACHE                       0xE7
86 #define SAT_FLUSH_CACHE_EXT                   0xEA
87 #define SAT_STANDBY                           0xE2
88 #define SAT_MEDIA_EJECT                       0xED
89 #define SAT_WRITE_SECTORS                     0x30
90 #define SAT_WRITE_SECTORS_EXT                 0x34
91 #define SAT_READ_SECTORS                      0x20
92 #define SAT_READ_SECTORS_EXT                  0x24
93 #define SAT_GET_MEDIA_STATUS                  0xDA
94 #define SAT_SET_FEATURES                      0xEF
95 #define SAT_IDENTIFY_DEVICE                   0xEC
96 #define SAT_READ_BUFFER                       0xE4
97 #define SAT_WRITE_BUFFER                      0xE8
98 
99 /*
100  * ATAPI Command code
101 */
102 #define SAT_IDENTIFY_PACKET_DEVICE            0xA1
103 #define SAT_PACKET                            0xA0
104 #define SAT_DEVICE_RESET                      0x08
105 #define SAT_EXECUTE_DEVICE_DIAGNOSTIC         0x90
106 
107 
108 /*
109  * ATA Status Register Mask
110  */
111 #define ERR_ATA_STATUS_MASK                   0x01    /* Error/check bit  */
112 #define DRQ_ATA_STATUS_MASK                   0x08    /* Data Request bit */
113 #define DF_ATA_STATUS_MASK                    0x20    /* Device Fault bit */
114 #define DRDY_ATA_STATUS_MASK                  0x40    /* Device Ready bit */
115 #define BSY_ATA_STATUS_MASK                   0x80    /* Busy bit         */
116 
117 /*
118  * ATA Error Register Mask
119  */
120 #define NM_ATA_ERROR_MASK                     0x02    /* No media present bit         */
121 #define ABRT_ATA_ERROR_MASK                   0x04    /* Command aborted bit          */
122 #define MCR_ATA_ERROR_MASK                    0x08    /* Media change request bit     */
123 #define IDNF_ATA_ERROR_MASK                   0x10    /* Address not found bit        */
124 #define MC_ATA_ERROR_MASK                     0x20    /* Media has changed bit        */
125 #define UNC_ATA_ERROR_MASK                    0x40    /* Uncorrectable data error bit */
126 #define ICRC_ATA_ERROR_MASK                   0x80    /* Interface CRC error bit      */
127 
128 
129 
130 
131 /*
132  *  transfer length and LBA limit 2^28 See identify device data word 61:60
133  *  ATA spec p125
134  *  7 zeros
135  */
136 #define SAT_TR_LBA_LIMIT                      0x10000000
137 
138 /*
139  *  transfer length and LBA limit 2^48 See identify device data word 61:60
140  *  ATA spec p125
141  *  12 zeros
142  */
143 #define SAT_EXT_TR_LBA_LIMIT                  0x1000000000000
144 
145 
146 /*
147  * ATA command type. This is for setting LBA, Sector Count
148  */
149 #define SAT_NON_EXT_TYPE                      0
150 #define SAT_EXT_TYPE                          1
151 #define SAT_FP_TYPE                           2
152 
153 
154 /*
155  * Report LUNs response data.
156  */
157 typedef struct smScsiReportLun_s
158 {
159   bit8              len[4];
160   bit32             reserved;
161   tiLUN_t           lunList[1];
162 } smScsiReportLun_t;
163 
164 /* Inquiry vendor string */
165 #define AG_SAT_VENDOR_ID_STRING               "ATA     "
166 
167 /*
168  * Simple form of SATA Identify Device Data, similar definition is defined by
169  * LL Layer as agsaSATAIdentifyData_t.
170  */
171 typedef struct satSimpleSATAIdentifyData_s
172 {
173   bit16   word[256];
174 } satSimpleSATAIdentifyData_t;
175 
176 
177 /*
178  * READ LOG EXT page 10h
179  */
180 typedef struct satReadLogExtPage10h_s
181 {
182   bit8   byte[512];
183 } satReadLogExtPage10h_t;
184 
185 /*
186  * READ LOG EXT Extended Self-test log
187  * ATA Table27 p196
188  */
189 typedef struct satReadLogExtSelfTest_s
190 {
191   bit8   byte[512];
192 } satReadLogExtSelfTest_t;
193 
194 /*
195  * SMART READ LOG Self-test log
196  * ATA Table60 p296
197  */
198 typedef struct satSmartReadLogSelfTest_s
199 {
200   bit8   byte[512];
201 } satSmartReadLogSelfTest_t;
202 
203 
204 /*
205  * Flag definition for satIntFlag field in smSatInternalIo_t.
206  */
207 
208 /* Original NCQ I/O already completed, so at the completion of READ LOG EXT
209  *  page 10h, ignore the TAG tranaltion to get the failed I/O
210  */
211 #define AG_SAT_INT_IO_FLAG_ORG_IO_COMPLETED   0x00000001
212 
213 #define INQUIRY_SUPPORTED_VPD_PAGE                          0x00
214 #define INQUIRY_UNIT_SERIAL_NUMBER_VPD_PAGE                 0x80
215 #define INQUIRY_DEVICE_IDENTIFICATION_VPD_PAGE              0x83
216 #define INQUIRY_ATA_INFORMATION_VPD_PAGE                    0x89
217 #define INQUIRY_BLOCK_DEVICE_CHARACTERISTICS_VPD_PAGE       0xB1
218 
219 #define MODESENSE_CONTROL_PAGE                            0x0A
220 #define MODESENSE_READ_WRITE_ERROR_RECOVERY_PAGE          0x01
221 #define MODESENSE_CACHING                                 0x08
222 #define MODESENSE_INFORMATION_EXCEPTION_CONTROL_PAGE      0x1C
223 #define MODESENSE_RETURN_ALL_PAGES                        0x3F
224 #define MODESENSE_VENDOR_SPECIFIC_PAGE                    0x00
225 
226 #define MODESELECT_CONTROL_PAGE                           0x0A
227 #define MODESELECT_READ_WRITE_ERROR_RECOVERY_PAGE         0x01
228 #define MODESELECT_CACHING                                0x08
229 #define MODESELECT_INFORMATION_EXCEPTION_CONTROL_PAGE     0x1C
230 #define MODESELECT_RETURN_ALL_PAGES                       0x3F
231 #define MODESELECT_VENDOR_SPECIFIC_PAGE                   0x00
232 
233 #define LOGSENSE_SUPPORTED_LOG_PAGES                      0x00
234 #define LOGSENSE_SELFTEST_RESULTS_PAGE                    0x10
235 #define LOGSENSE_INFORMATION_EXCEPTIONS_PAGE              0x2F
236 
237 
238 /*
239  *  Bit mask definition
240  */
241 #define SCSI_EVPD_MASK               0x01
242 #define SCSI_IMMED_MASK              0x01
243 #define SCSI_NACA_MASK               0x04
244 #define SCSI_LINK_MASK               0x01
245 #define SCSI_PF_MASK                 0x10
246 #define SCSI_DEVOFFL_MASK            0x02
247 #define SCSI_UNITOFFL_MASK           0x01
248 #define SCSI_START_MASK              0x01
249 #define SCSI_LOEJ_MASK               0x02
250 #define SCSI_NM_MASK                 0x02
251 #define SCSI_FLUSH_CACHE_IMMED_MASK              0x02
252 #define SCSI_FUA_NV_MASK                         0x02
253 #define SCSI_VERIFY_BYTCHK_MASK                  0x02
254 #define SCSI_FORMAT_UNIT_IMMED_MASK              0x02
255 #define SCSI_FORMAT_UNIT_FOV_MASK                0x80
256 #define SCSI_FORMAT_UNIT_DCRT_MASK               0x20
257 #define SCSI_FORMAT_UNIT_IP_MASK                 0x08
258 #define SCSI_WRITE_SAME_LBDATA_MASK              0x02
259 #define SCSI_WRITE_SAME_PBDATA_MASK              0x04
260 #define SCSI_SYNC_CACHE_IMMED_MASK               0x02
261 #define SCSI_WRITE_N_VERIFY_BYTCHK_MASK          0x02
262 #define SCSI_SEND_DIAGNOSTIC_SELFTEST_MASK       0x04
263 #define SCSI_FORMAT_UNIT_DEFECT_LIST_FORMAT_MASK 0x07
264 #define SCSI_FORMAT_UNIT_FMTDATA_MASK            0x10
265 #define SCSI_FORMAT_UNIT_DCRT_MASK               0x20
266 #define SCSI_FORMAT_UNIT_CMPLIST_MASK            0x08
267 #define SCSI_FORMAT_UNIT_LONGLIST_MASK           0x20
268 #define SCSI_READ10_FUA_MASK                     0x08
269 #define SCSI_READ12_FUA_MASK                     0x08
270 #define SCSI_READ16_FUA_MASK                     0x08
271 #define SCSI_WRITE10_FUA_MASK                    0x08
272 #define SCSI_WRITE12_FUA_MASK                    0x08
273 #define SCSI_WRITE16_FUA_MASK                    0x08
274 #define SCSI_READ_CAPACITY10_PMI_MASK            0x01
275 #define SCSI_READ_CAPACITY16_PMI_MASK            0x01
276 #define SCSI_MODE_SENSE6_PC_MASK                 0xC0
277 #define SCSI_MODE_SENSE6_PAGE_CODE_MASK          0x3F
278 #define SCSI_MODE_SENSE10_PC_MASK                0xC0
279 #define SCSI_MODE_SENSE10_LLBAA_MASK             0x10
280 #define SCSI_MODE_SENSE10_PAGE_CODE_MASK         0x3F
281 #define SCSI_SEND_DIAGNOSTIC_TEST_CODE_MASK      0xE0
282 #define SCSI_LOG_SENSE_PAGE_CODE_MASK            0x3F
283 #define SCSI_MODE_SELECT6_PF_MASK                0x10
284 #define SCSI_MODE_SELECT6_AWRE_MASK              0x80
285 #define SCSI_MODE_SELECT6_RC_MASK                0x10
286 #define SCSI_MODE_SELECT6_EER_MASK               0x08
287 #define SCSI_MODE_SELECT6_PER_MASK               0x04
288 #define SCSI_MODE_SELECT6_DTE_MASK               0x02
289 #define SCSI_MODE_SELECT6_DCR_MASK               0x01
290 #define SCSI_MODE_SELECT6_WCE_MASK               0x04
291 #define SCSI_MODE_SELECT6_DRA_MASK               0x20
292 #define SCSI_MODE_SELECT6_PERF_MASK              0x80
293 #define SCSI_MODE_SELECT6_TEST_MASK              0x04
294 #define SCSI_MODE_SELECT6_DEXCPT_MASK            0x08
295 #define SCSI_MODE_SELECT10_PF_MASK               0x10
296 #define SCSI_MODE_SELECT10_LONGLBA_MASK          0x01
297 #define SCSI_MODE_SELECT10_AWRE_MASK             0x80
298 #define SCSI_MODE_SELECT10_RC_MASK               0x10
299 #define SCSI_MODE_SELECT10_EER_MASK              0x08
300 #define SCSI_MODE_SELECT10_PER_MASK              0x04
301 #define SCSI_MODE_SELECT10_DTE_MASK              0x02
302 #define SCSI_MODE_SELECT10_DCR_MASK              0x01
303 #define SCSI_MODE_SELECT10_WCE_MASK              0x04
304 #define SCSI_MODE_SELECT10_DRA_MASK              0x20
305 #define SCSI_MODE_SELECT10_PERF_MASK             0x80
306 #define SCSI_MODE_SELECT10_TEST_MASK             0x04
307 #define SCSI_MODE_SELECT10_DEXCPT_MASK           0x08
308 #define SCSI_WRITE_N_VERIFY10_FUA_MASK           0x08
309 #define SCSI_REQUEST_SENSE_DESC_MASK             0x01
310 #define SCSI_READ_BUFFER_MODE_MASK               0x1F
311 
312 #define ATA_REMOVABLE_MEDIA_DEVICE_MASK          0x80
313 #define SCSI_REASSIGN_BLOCKS_LONGLIST_MASK       0x01
314 #define SCSI_REASSIGN_BLOCKS_LONGLBA_MASK        0x02
315 
316 
317 #define SENSE_DATA_LENGTH                        0x12 /* 18 */
318 #define SELFTEST_RESULTS_LOG_PAGE_LENGTH         404
319 #define INFORMATION_EXCEPTIONS_LOG_PAGE_LENGTH   11
320 #define ZERO_MEDIA_SERIAL_NUMBER_LENGTH          8
321 
322 #define LOG_SENSE_0 0
323 #define LOG_SENSE_1 1
324 #define LOG_SENSE_2 2
325 
326 #define READ_BUFFER_DATA_MODE                    0x02
327 #define READ_BUFFER_DESCRIPTOR_MODE              0x03
328 #define READ_BUFFER_DESCRIPTOR_MODE_DATA_LEN     0x04
329 
330 #define WRITE_BUFFER_DATA_MODE                   0x02
331 #define WRITE_BUFFER_DL_MICROCODE_SAVE_MODE      0x05
332 
333 /* bit mask */
334 #define BIT0_MASK                                0x01
335 #define BIT1_MASK                                0x02
336 #define BIT2_MASK                                0x04
337 #define BIT3_MASK                                0x08
338 #define BIT4_MASK                                0x10
339 #define BIT5_MASK                                0x20
340 #define BIT6_MASK                                0x40
341 #define BIT7_MASK                                0x80
342 
343 #define MODE_SENSE6_RETURN_ALL_PAGES_LEN         68
344 #define MODE_SENSE6_CONTROL_PAGE_LEN             24
345 #define MODE_SENSE6_READ_WRITE_ERROR_RECOVERY_PAGE_LEN 24
346 #define MODE_SENSE6_CACHING_LEN                  32
347 #define MODE_SENSE6_INFORMATION_EXCEPTION_CONTROL_PAGE_LEN 24
348 
349 
350 #define MODE_SENSE10_RETURN_ALL_PAGES_LEN         68 + 4
351 #define MODE_SENSE10_CONTROL_PAGE_LEN             24 + 4
352 #define MODE_SENSE10_READ_WRITE_ERROR_RECOVERY_PAGE_LEN 24 + 4
353 #define MODE_SENSE10_CACHING_LEN                  32 + 4
354 #define MODE_SENSE10_INFORMATION_EXCEPTION_CONTROL_PAGE_LEN 24 + 4
355 
356 #define MODE_SENSE10_RETURN_ALL_PAGES_LLBAA_LEN         68 + 4 + 8
357 #define MODE_SENSE10_CONTROL_PAGE_LLBAA_LEN             24 + 4 + 8
358 #define MODE_SENSE10_READ_WRITE_ERROR_RECOVERY_PAGE_LLBAA_LEN 24 + 4 + 8
359 #define MODE_SENSE10_CACHING_LLBAA_LEN                  32 + 4 + 8
360 #define MODE_SENSE10_INFORMATION_EXCEPTION_CONTROL_PAGE_LLBAA_LEN 24 + 4 + 8
361 
362 /*****************************************************************************
363 ** SCSI SENSE KEY VALUES
364 *****************************************************************************/
365 
366 #define SCSI_SNSKEY_NO_SENSE           0x00
367 #define SCSI_SNSKEY_RECOVERED_ERROR    0x01
368 #define SCSI_SNSKEY_NOT_READY          0x02
369 #define SCSI_SNSKEY_MEDIUM_ERROR       0x03
370 #define SCSI_SNSKEY_HARDWARE_ERROR     0x04
371 #define SCSI_SNSKEY_ILLEGAL_REQUEST    0x05
372 #define SCSI_SNSKEY_UNIT_ATTENTION     0x06
373 #define SCSI_SNSKEY_DATA_PROTECT       0x07
374 #define SCSI_SNSKEY_ABORTED_COMMAND    0x0B
375 #define SCSI_SNSKEY_MISCOMPARE         0x0E
376 
377 /*****************************************************************************
378 ** SCSI Additional Sense Codes and Qualifiers combo two-bytes
379 *****************************************************************************/
380 
381 #define SCSI_SNSCODE_NO_ADDITIONAL_INFO                         0x0000
382 #define SCSI_SNSCODE_LUN_CRC_ERROR_DETECTED                     0x0803
383 #define SCSI_SNSCODE_INVALID_COMMAND                            0x2000
384 #define SCSI_SNSCODE_LOGICAL_BLOCK_OUT                          0x2100
385 #define SCSI_SNSCODE_INVALID_FIELD_IN_CDB                       0x2400
386 #define SCSI_SNSCODE_LOGICAL_NOT_SUPPORTED                      0x2500
387 #define SCSI_SNSCODE_POWERON_RESET                              0x2900
388 #define SCSI_SNSCODE_EVERLAPPED_CMDS                            0x4e00
389 #define SCSI_SNSCODE_INTERNAL_TARGET_FAILURE                    0x4400
390 #define SCSI_SNSCODE_MEDIUM_NOT_PRESENT                         0x3a00
391 #define SCSI_SNSCODE_UNRECOVERED_READ_ERROR                     0x1100
392 #define SCSI_SNSCODE_RECORD_NOT_FOUND                           0x1401
393 #define SCSI_SNSCODE_NOT_READY_TO_READY_CHANGE                  0x2800
394 #define SCSI_SNSCODE_OPERATOR_MEDIUM_REMOVAL_REQUEST            0x5a01
395 #define SCSI_SNSCODE_INFORMATION_UNIT_CRC_ERROR                 0x4703
396 #define SCSI_SNSCODE_LOGICAL_UNIT_NOT_READY_FORMAT_IN_PROGRESS  0x0404
397 #define SCSI_SNSCODE_HARDWARE_IMPENDING_FAILURE                 0x5d10
398 #define SCSI_SNSCODE_LOW_POWER_CONDITION_ON                     0x5e00
399 #define SCSI_SNSCODE_LOGICAL_UNIT_NOT_READY_INIT_REQUIRED       0x0402
400 #define SCSI_SNSCODE_INVALID_FIELD_PARAMETER_LIST               0x2600
401 #define SCSI_SNSCODE_ATA_DEVICE_FAILED_SET_FEATURES             0x4471
402 #define SCSI_SNSCODE_ATA_DEVICE_FEATURE_NOT_ENABLED             0x670B
403 #define SCSI_SNSCODE_LOGICAL_UNIT_FAILED_SELF_TEST              0x3E03
404 #define SCSI_SNSCODE_COMMAND_SEQUENCE_ERROR                     0x2C00
405 #define SCSI_SNSCODE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE         0x2100
406 #define SCSI_SNSCODE_LOGICAL_UNIT_FAILURE                       0x3E01
407 #define SCSI_SNSCODE_MEDIA_LOAD_OR_EJECT_FAILED                 0x5300
408 #define SCSI_SNSCODE_LOGICAL_UNIT_NOT_READY_INITIALIZING_COMMAND_REQUIRED 0x0402
409 #define SCSI_SNSCODE_LOGICAL_UNIT_NOT_READY_CAUSE_NOT_REPORTABLE          0x0400
410 #define SCSI_SNSCODE_LOGICAL_UNIT_DOES_NOT_RESPOND_TO_SELECTION           0x0500
411 #define SCSI_SNSCODE_DIAGNOSTIC_FAILURE_ON_COMPONENT_NN         0x4000
412 #define SCSI_SNSCODE_COMMANDS_CLEARED_BY_ANOTHER_INITIATOR      0x2F00
413 #define SCSI_SNSCODE_WRITE_ERROR_AUTO_REALLOCATION_FAILED       0x0C02
414 #define SCSI_SNSCODE_ATA_PASS_THROUGH_INFORMATION_AVAILABLE     0x001D
415 
416 /*****************************************************************************
417 ** SCSI Additional Sense Codes and Qualifiers saparate bytes
418 *****************************************************************************/
419 
420 #define SCSI_ASC_NOTREADY_INIT_CMD_REQ    0x04
421 #define SCSI_ASCQ_NOTREADY_INIT_CMD_REQ   0x02
422 
423 
424 /*****************************************************************************
425 ** Inquiry command fields and response sizes
426 *****************************************************************************/
427 #define SCSIOP_INQUIRY_CMDDT        0x02
428 #define SCSIOP_INQUIRY_EVPD         0x01
429 #define STANDARD_INQUIRY_SIZE       36
430 #define SATA_PAGE83_INQUIRY_WWN_SIZE       16      /* SAT, revision8, Table81, p78, 12 + 4 */
431 #define SATA_PAGE83_INQUIRY_NO_WWN_SIZE    76      /* SAT, revision8, Table81, p78, 72 + 4 */
432 #define SATA_PAGE89_INQUIRY_SIZE    572     /* SAT, revision8, Table87, p84 */
433 #define SATA_PAGE0_INQUIRY_SIZE     9       /* SPC-4, 7.6.9   Table331, p345 */
434 #define SATA_PAGE80_INQUIRY_SIZE    24     /* SAT, revision8, Table79, p77 */
435 #define SATA_PAGEB1_INQUIRY_SIZE    64     /* SBC-3, revision31, Table193, p273 */
436 
437 /*****************************************************************************
438 ** SCSI Operation Codes (first byte in CDB)
439 *****************************************************************************/
440 
441 
442 #define SCSIOPC_TEST_UNIT_READY     0x00
443 #define SCSIOPC_INQUIRY             0x12
444 #define SCSIOPC_MODE_SENSE_6        0x1A
445 #define SCSIOPC_MODE_SENSE_10       0x5A
446 #define SCSIOPC_MODE_SELECT_6       0x15
447 #define SCSIOPC_START_STOP_UNIT     0x1B
448 #define SCSIOPC_READ_CAPACITY_10    0x25
449 #define SCSIOPC_READ_CAPACITY_16    0x9E
450 #define SCSIOPC_READ_6              0x08
451 #define SCSIOPC_READ_10             0x28
452 #define SCSIOPC_READ_12             0xA8
453 #define SCSIOPC_READ_16             0x88
454 #define SCSIOPC_WRITE_6             0x0A
455 #define SCSIOPC_WRITE_10            0x2A
456 #define SCSIOPC_WRITE_12            0xAA
457 #define SCSIOPC_WRITE_16            0x8A
458 #define SCSIOPC_WRITE_VERIFY        0x2E
459 #define SCSIOPC_VERIFY_10           0x2F
460 #define SCSIOPC_VERIFY_12           0xAF
461 #define SCSIOPC_VERIFY_16           0x8F
462 #define SCSIOPC_REQUEST_SENSE       0x03
463 #define SCSIOPC_REPORT_LUN          0xA0
464 #define SCSIOPC_FORMAT_UNIT         0x04
465 #define SCSIOPC_SEND_DIAGNOSTIC     0x1D
466 #define SCSIOPC_WRITE_SAME_10       0x41
467 #define SCSIOPC_WRITE_SAME_16       0x93
468 #define SCSIOPC_READ_BUFFER         0x3C
469 #define SCSIOPC_WRITE_BUFFER        0x3B
470 
471 #define SCSIOPC_LOG_SENSE           0x4D
472 #define SCSIOPC_LOG_SELECT          0x4C
473 #define SCSIOPC_MODE_SELECT_6       0x15
474 #define SCSIOPC_MODE_SELECT_10      0x55
475 #define SCSIOPC_SYNCHRONIZE_CACHE_10 0x35
476 #define SCSIOPC_SYNCHRONIZE_CACHE_16 0x91
477 #define SCSIOPC_WRITE_AND_VERIFY_10 0x2E
478 #define SCSIOPC_WRITE_AND_VERIFY_12 0xAE
479 #define SCSIOPC_WRITE_AND_VERIFY_16 0x8E
480 #define SCSIOPC_READ_MEDIA_SERIAL_NUMBER 0xAB
481 #define SCSIOPC_REASSIGN_BLOCKS     0x07
482 
483 #define SCSIOPC_GET_CONFIG          0x46
484 #define SCSIOPC_GET_EVENT_STATUS_NOTIFICATION        0x4a
485 #define SCSIOPC_REPORT_KEY          0xA4
486 #define SCSIOPC_SEND_KEY            0xA3
487 #define SCSIOPC_READ_DVD_STRUCTURE  0xAD
488 #define SCSIOPC_TOC                 0x43
489 #define SCSIOPC_PREVENT_ALLOW_MEDIUM_REMOVAL         0x1E
490 #define SCSIOPC_READ_VERIFY         0x42
491 #define SCSIOPC_ATA_PASS_THROUGH12	0xA1
492 #define SCSIOPC_ATA_PASS_THROUGH16	0x85
493 
494 
495 /*! \def MIN(a,b)
496 * \brief MIN macro
497 *
498 * use to find MIN of two values
499 */
500 #ifndef MIN
501 #define MIN(a,b) ((a) < (b) ? (a) : (b))
502 #endif
503 
504 /*! \def MAX(a,b)
505 * \brief MAX macro
506 *
507 * use to find MAX of two values
508 */
509 #ifndef MAX
510 #define MAX(a,b) ((a) < (b) ? (b) : (a))
511 #endif
512 
513 /* for debugging print */
514 #if defined(SM_DEBUG)
515 
516 /*
517 * for debugging purposes.
518 */
519 extern bit32 gSMDebugLevel;
520 
521 #define SM_DBG0(format) tdsmLogDebugString(gSMDebugLevel, 0, format)
522 #define SM_DBG1(format) tdsmLogDebugString(gSMDebugLevel, 1, format)
523 #define SM_DBG2(format) tdsmLogDebugString(gSMDebugLevel, 2, format)
524 #define SM_DBG3(format) tdsmLogDebugString(gSMDebugLevel, 3, format)
525 #define SM_DBG4(format) tdsmLogDebugString(gSMDebugLevel, 4, format)
526 #define SM_DBG5(format) tdsmLogDebugString(gSMDebugLevel, 5, format)
527 #define SM_DBG6(format) tdsmLogDebugString(gSMDebugLevel, 6, format)
528 
529 #else
530 
531 #define SM_DBG0(format)
532 #define SM_DBG1(format)
533 #define SM_DBG2(format)
534 #define SM_DBG3(format)
535 #define SM_DBG4(format)
536 #define SM_DBG5(format)
537 #define SM_DBG6(format)
538 
539 #endif /* SM_DEBUG */
540 
541 //#define SM_ASSERT OS_ASSERT
542 //#define tdsmLogDebugString TIDEBUG_MSG
543 
544 /*
545  * SAT specific structure per SATA drive
546  */
547 #define SAT_NONNCQ_MAX  1
548 #define SAT_NCQ_MAX     32
549 #define SAT_MAX_INT_IO  16
550 #define SAT_APAPI_CMDQ_MAX 2
551 
552 /* Device state */
553 #define SAT_DEV_STATE_NORMAL                  0  /* Normal */
554 #define SAT_DEV_STATE_IN_RECOVERY             1  /* SAT in recovery mode */
555 #define SAT_DEV_STATE_FORMAT_IN_PROGRESS      2  /* Format unit in progress */
556 #define SAT_DEV_STATE_SMART_THRESHOLD         3  /* SMART Threshold Exceeded Condition*/
557 #define SAT_DEV_STATE_LOW_POWER               4  /* Low Power State*/
558 
559 #ifndef agNULL
560 #define agNULL     ((void *)0)
561 #endif
562 
563 #define SM_SET_ESGL_EXTEND(val) \
564  ((val) = (val) | 0x80000000)
565 
566 #define SM_CLEAR_ESGL_EXTEND(val) \
567  ((val) = (val) & 0x7FFFFFFF)
568 
569 #ifndef OPEN_RETRY_RETRIES
570 #define OPEN_RETRY_RETRIES	10
571 #endif
572 
573 /*********************************************************************
574 * CPU buffer access macro                                            *
575 *                                                                    *
576 */
577 
578 #define OSSA_OFFSET_OF(STRUCT_TYPE, FEILD)              \
579         (bitptr)&(((STRUCT_TYPE *)0)->FEILD)
580 
581 
582 #if defined(SA_CPU_LITTLE_ENDIAN)
583 
584 #define OSSA_WRITE_LE_16(AGROOT, DMA_ADDR, OFFSET, VALUE16)     \
585         (*((bit16 *)(((bit8 *)DMA_ADDR)+(OFFSET)))) = (bit16)(VALUE16);
586 
587 #define OSSA_WRITE_LE_32(AGROOT, DMA_ADDR, OFFSET, VALUE32)     \
588         (*((bit32 *)(((bit8 *)DMA_ADDR)+(OFFSET)))) = (bit32)(VALUE32);
589 
590 #define OSSA_READ_LE_16(AGROOT, ADDR16, DMA_ADDR, OFFSET)       \
591         (*((bit16 *)ADDR16)) = (*((bit16 *)(((bit8 *)DMA_ADDR)+(OFFSET))))
592 
593 #define OSSA_READ_LE_32(AGROOT, ADDR32, DMA_ADDR, OFFSET)       \
594         (*((bit32 *)ADDR32)) = (*((bit32 *)(((bit8 *)DMA_ADDR)+(OFFSET))))
595 
596 #define OSSA_WRITE_BE_16(AGROOT, DMA_ADDR, OFFSET, VALUE16)     \
597         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))))   = (bit8)((((bit16)VALUE16)>>8)&0xFF);  \
598         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1))) = (bit8)(((bit16)VALUE16)&0xFF);
599 
600 #define OSSA_WRITE_BE_32(AGROOT, DMA_ADDR, OFFSET, VALUE32)     \
601         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))))   = (bit8)((((bit32)VALUE32)>>24)&0xFF); \
602         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1))) = (bit8)((((bit32)VALUE32)>>16)&0xFF); \
603         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+2))) = (bit8)((((bit32)VALUE32)>>8)&0xFF);  \
604         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+3))) = (bit8)(((bit32)VALUE32)&0xFF);
605 
606 #define OSSA_READ_BE_16(AGROOT, ADDR16, DMA_ADDR, OFFSET)       \
607         (*(bit8 *)(((bit8 *)ADDR16)+1)) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))));   \
608         (*(bit8 *)(((bit8 *)ADDR16)))   = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1)));
609 
610 #define OSSA_READ_BE_32(AGROOT, ADDR32, DMA_ADDR, OFFSET)       \
611         (*(bit8 *)(((bit8 *)ADDR32)+3)) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))));   \
612         (*(bit8 *)(((bit8 *)ADDR32)+2)) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1))); \
613         (*(bit8 *)(((bit8 *)ADDR32)+1)) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+2))); \
614         (*(bit8 *)(((bit8 *)ADDR32)))   = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+3)));
615 
616 #define OSSA_WRITE_BYTE_STRING(AGROOT, DEST_ADDR, SRC_ADDR, LEN)                        \
617         si_memcpy(DEST_ADDR, SRC_ADDR, LEN);
618 
619 
620 #elif defined(SA_CPU_BIG_ENDIAN)
621 
622 #define OSSA_WRITE_LE_16(AGROOT, DMA_ADDR, OFFSET, VALUE16)     \
623         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1))) = (bit8)((((bit16)VALUE16)>>8)&0xFF);   \
624         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))))   = (bit8)(((bit16)VALUE16)&0xFF);
625 
626 #define OSSA_WRITE_LE_32(AGROOT, DMA_ADDR, OFFSET, VALUE32)     \
627         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+3))) = (bit8)((((bit32)VALUE32)>>24)&0xFF);  \
628         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+2))) = (bit8)((((bit32)VALUE32)>>16)&0xFF);  \
629         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1))) = (bit8)((((bit32)VALUE32)>>8)&0xFF);   \
630         (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))))   = (bit8)(((bit32)VALUE32)&0xFF);
631 
632 #define OSSA_READ_LE_16(AGROOT, ADDR16, DMA_ADDR, OFFSET)       \
633         (*(bit8 *)(((bit8 *)ADDR16)+1)) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))));   \
634         (*(bit8 *)(((bit8 *)ADDR16)))   = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1)));
635 
636 #define OSSA_READ_LE_32(AGROOT, ADDR32, DMA_ADDR, OFFSET)       \
637         (*((bit8 *)(((bit8 *)ADDR32)+3))) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET))));   \
638         (*((bit8 *)(((bit8 *)ADDR32)+2))) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+1))); \
639         (*((bit8 *)(((bit8 *)ADDR32)+1))) = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+2))); \
640         (*((bit8 *)(((bit8 *)ADDR32))))   = (*((bit8 *)(((bit8 *)DMA_ADDR)+(OFFSET)+3)));
641 
642 #define OSSA_WRITE_BE_16(AGROOT, DMA_ADDR, OFFSET, VALUE16)         \
643         (*((bit16 *)(((bit8 *)DMA_ADDR)+(OFFSET)))) = (bit16)(VALUE16);
644 
645 #define OSSA_WRITE_BE_32(AGROOT, DMA_ADDR, OFFSET, VALUE32)         \
646         (*((bit32 *)(((bit8 *)DMA_ADDR)+(OFFSET)))) = (bit32)(VALUE32);
647 
648 #define OSSA_READ_BE_16(AGROOT, ADDR16, DMA_ADDR, OFFSET)           \
649         (*((bit16 *)ADDR16)) = (*((bit16 *)(((bit8 *)DMA_ADDR)+(OFFSET))));
650 
651 #define OSSA_READ_BE_32(AGROOT, ADDR32, DMA_ADDR, OFFSET)           \
652         (*((bit32 *)ADDR32)) = (*((bit32 *)(((bit8 *)DMA_ADDR)+(OFFSET))));
653 
654 #define OSSA_WRITE_BYTE_STRING(AGROOT, DEST_ADDR, SRC_ADDR, LEN)    \
655         si_memcpy(DEST_ADDR, SRC_ADDR, LEN);
656 
657 #else
658 
659 #error (Host CPU endianess undefined!!)
660 
661 #endif
662 
663 
664 #if defined(SA_CPU_LITTLE_ENDIAN)
665 
666 #ifndef LEBIT16_TO_BIT16
667 #define LEBIT16_TO_BIT16(_x)   (_x)
668 #endif
669 
670 #ifndef BIT16_TO_LEBIT16
671 #define BIT16_TO_LEBIT16(_x)   (_x)
672 #endif
673 
674 #ifndef BIT16_TO_BEBIT16
675 #define BIT16_TO_BEBIT16(_x)   AGSA_FLIP_2_BYTES(_x)
676 #endif
677 
678 #ifndef BEBIT16_TO_BIT16
679 #define BEBIT16_TO_BIT16(_x)   AGSA_FLIP_2_BYTES(_x)
680 #endif
681 
682 #ifndef LEBIT32_TO_BIT32
683 #define LEBIT32_TO_BIT32(_x)   (_x)
684 #endif
685 
686 #ifndef BIT32_TO_LEBIT32
687 #define BIT32_TO_LEBIT32(_x)   (_x)
688 #endif
689 
690 
691 #ifndef BEBIT32_TO_BIT32
692 #define BEBIT32_TO_BIT32(_x)   AGSA_FLIP_4_BYTES(_x)
693 #endif
694 
695 #ifndef BIT32_TO_BEBIT32
696 #define BIT32_TO_BEBIT32(_x)   AGSA_FLIP_4_BYTES(_x)
697 #endif
698 
699 #elif defined(SA_CPU_BIG_ENDIAN)
700 
701 #ifndef LEBIT16_TO_BIT16
702 #define LEBIT16_TO_BIT16(_x)   AGSA_FLIP_2_BYTES(_x)
703 #endif
704 
705 #ifndef BIT16_TO_LEBIT16
706 #define BIT16_TO_LEBIT16(_x)   AGSA_FLIP_2_BYTES(_x)
707 #endif
708 
709 #ifndef BIT16_TO_BEBIT16
710 #define BIT16_TO_BEBIT16(_x)   (_x)
711 #endif
712 
713 #ifndef BEBIT16_TO_BIT16
714 #define BEBIT16_TO_BIT16(_x)   (_x)
715 #endif
716 
717 #ifndef LEBIT32_TO_BIT32
718 #define LEBIT32_TO_BIT32(_x)   AGSA_FLIP_4_BYTES(_x)
719 #endif
720 
721 #ifndef BIT32_TO_LEBIT32
722 #define BIT32_TO_LEBIT32(_x)   AGSA_FLIP_4_BYTES(_x)
723 #endif
724 
725 #ifndef BEBIT32_TO_BIT32
726 #define BEBIT32_TO_BIT32(_x)   (_x)
727 #endif
728 
729 #ifndef BIT32_TO_BEBIT32
730 #define BIT32_TO_BEBIT32(_x)   (_x)
731 #endif
732 
733 #else
734 
735 #error No definition of SA_CPU_BIG_ENDIAN or SA_CPU_LITTLE_ENDIAN
736 
737 #endif
738 
739 
740 /*
741  * Task Management task used in tiINITaskManagement()
742  *
743  * 1 SM_ABORT TASK - aborts the task identified by the Referenced  Task Tag field.
744  * 2 SM_ABORT TASK SET - aborts all Tasks issued by this initiator on the Logical Unit
745  * 3 SM_CLEAR ACA - clears the Auto Contingent Allegiance condition.
746  * 4 SM_CLEAR TASK SET - Aborts all Tasks (from all initiators) for the Logical Unit.
747  * 5 SM_LOGICAL UNIT RESET
748  * 6 SM_TARGET WARM RESET  - iSCSI only
749  * 7 SM_TARGET_COLD_RESET  - iSCSI only
750  * 8 SM_TASK_REASSIGN      - iSCSI only
751  * 9 SM_QUERY_TASK         - SAS only
752  */
753 
754 #define SM_ABORT_TASK          1
755 #define SM_ABORT_TASK_SET      2
756 #define SM_CLEAR_ACA           3
757 #define SM_CLEAR_TASK_SET      4
758 #define SM_LOGICAL_UNIT_RESET  5
759 #define SM_TARGET_WARM_RESET   6    /* iSCSI only */
760 #define SM_TARGET_COLD_RESET   7    /* iSCSI only */
761 #define SM_TASK_REASSIGN       8    /* iSCSI only */
762 #define SM_QUERY_TASK          9    /* SAS only   */
763 
764 /* SMP PHY CONTROL OPERATION */
765 #define SMP_PHY_CONTROL_NOP                        0x00
766 #define SMP_PHY_CONTROL_LINK_RESET                 0x01
767 #define SMP_PHY_CONTROL_HARD_RESET                 0x02
768 #define SMP_PHY_CONTROL_DISABLE                    0x03
769 #define SMP_PHY_CONTROL_CLEAR_ERROR_LOG            0x05
770 #define SMP_PHY_CONTROL_CLEAR_AFFILIATION          0x06
771 #define SMP_PHY_CONTROL_XMIT_SATA_PS_SIGNAL        0x07
772 
773 /****************************************************************
774  *            Phy Control request
775  ****************************************************************/
776 typedef struct smpReqPhyControl_s
777 {
778   bit8   reserved1[4];
779   bit8   reserved2;
780   bit8   phyIdentifier;
781   bit8   phyOperation;
782   bit8   updatePartialPathwayTOValue;
783     /* b7-1 : reserved */
784     /* b0   : update partial pathway timeout value */
785   bit8   reserved3[20];
786   bit8   programmedMinPhysicalLinkRate;
787     /* b7-4 : programmed Minimum Physical Link Rate*/
788     /* b3-0 : reserved */
789   bit8   programmedMaxPhysicalLinkRate;
790     /* b7-4 : programmed Maximum Physical Link Rate*/
791     /* b3-0 : reserved */
792   bit8   reserved4[2];
793   bit8   partialPathwayTOValue;
794     /* b7-4 : reserved */
795     /* b3-0 : partial Pathway TO Value */
796   bit8   reserved5[3];
797 } smpReqPhyControl_t;
798 
799 
800 typedef struct smSMPFrameHeader_s
801 {
802     bit8   smpFrameType;      /* The first byte of SMP frame represents the SMP FRAME TYPE */
803     bit8   smpFunction;       /* The second byte of the SMP frame represents the SMP FUNCTION */
804     bit8   smpFunctionResult; /* The third byte of SMP frame represents FUNCTION RESULT of the SMP response. */
805     bit8   smpReserved;       /* reserved */
806 } smSMPFrameHeader_t;
807 
808 /* SMP direct payload size limit: IOMB direct payload size = 48 */
809 #define SMP_DIRECT_PAYLOAD_LIMIT 44
810 
811 #define SMP_REQUEST        0x40
812 #define SMP_RESPONSE       0x41
813 
814 #define SMP_PHY_CONTROL                            0x91
815 
816 /* SMP function results */
817 #define SMP_FUNCTION_ACCEPTED                      0x00
818 
819 /* bit8 array[4] -> bit32 */
820 #define SM_GET_SAS_ADDRESSLO(sasAddressLo)                  \
821     DMA_BEBIT32_TO_BIT32(*(bit32 *)sasAddressLo)
822 
823 #define SM_GET_SAS_ADDRESSHI(sasAddressHi)                  \
824     DMA_BEBIT32_TO_BIT32(*(bit32 *)sasAddressHi)
825 
826 /* SATA sector size 512 bytes = 0x200 bytes */
827 #define SATA_SECTOR_SIZE                          0x200
828 /* TL limit in sector */
829 /* for SAT_READ/WRITE_DMA and SAT_READ/WRITE_SECTORS ATA command */
830 #define NON_BIT48_ADDRESS_TL_LIMIT                0x100
831 /* for SAT_READ/WRITE_DMA_EXT and SAT_READ/WRITE_SECTORS_EXT and  SAT_READ/WRITE_FPDMA_QUEUEDATA command */
832 #define BIT48_ADDRESS_TL_LIMIT                    0xFFFF
833 
834 #define VEN_DEV_SPC                               0x800111f8
835 #define VEN_DEV_SPCv                              0x800811f8
836 #define VEN_DEV_SPCve                             0x800911f8
837 #define VEN_DEV_SPCvplus                          0x801811f8
838 #define VEN_DEV_SPCveplus                         0x801911f8
839 
840 #define SMIsSPC(agr) (VEN_DEV_SPC  == ossaHwRegReadConfig32(agr,0 ) ? 1 : 0) /* returns true config space read is SPC */
841 #define SMIsSPCv(agr)  (VEN_DEV_SPCv == ossaHwRegReadConfig32(agr,0 ) ? 1 : 0) /* returns true config space read is SPCv */
842 #define SMIsSPCve(agr) (VEN_DEV_SPCve  == ossaHwRegReadConfig32(agr,0 ) ? 1 : 0) /* returns true config space read is SPCve */
843 #define SMIsSPCvplus(agr)  (VEN_DEV_SPCvplus == ossaHwRegReadConfig32(agr,0 ) ? 1 : 0) /* returns true config space read is SPCv+ */
844 #define SMIsSPCveplus(agr)  (VEN_DEV_SPCveplus == ossaHwRegReadConfig32(agr,0 ) ? 1 : 0) /* returns true config space read is SPCve+ */
845 
846 #define DEFAULT_KEY_BUFFER_SIZE     64
847 
848 
849 #endif /* __SMDEFS_H__ */
850 
851