1 /*- 2 * Copyright (c) 2011 Advanced Computing Technologies LLC 3 * Written by: John H. Baldwin <jhb@FreeBSD.org> 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 /* 32 * Support APIs for Host to PCI bridge drivers and drivers that 33 * provide PCI domains. 34 */ 35 36 #include <sys/param.h> 37 #include <sys/bus.h> 38 #include <sys/malloc.h> 39 #include <sys/rman.h> 40 #include <sys/systm.h> 41 42 #include <dev/pci/pcireg.h> 43 #include <dev/pci/pcivar.h> 44 #include <dev/pci/pcib_private.h> 45 46 /* 47 * Try to read the bus number of a host-PCI bridge using appropriate config 48 * registers. 49 */ 50 int 51 host_pcib_get_busno(pci_read_config_fn read_config, int bus, int slot, int func, 52 uint8_t *busnum) 53 { 54 uint32_t id; 55 56 id = read_config(bus, slot, func, PCIR_DEVVENDOR, 4); 57 if (id == 0xffffffff) 58 return (0); 59 60 switch (id) { 61 case 0x12258086: 62 /* Intel 824?? */ 63 /* XXX This is a guess */ 64 /* *busnum = read_config(bus, slot, func, 0x41, 1); */ 65 *busnum = bus; 66 break; 67 case 0x84c48086: 68 /* Intel 82454KX/GX (Orion) */ 69 *busnum = read_config(bus, slot, func, 0x4a, 1); 70 break; 71 case 0x84ca8086: 72 /* 73 * For the 450nx chipset, there is a whole bundle of 74 * things pretending to be host bridges. The MIOC will 75 * be seen first and isn't really a pci bridge (the 76 * actual busses are attached to the PXB's). We need to 77 * read the registers of the MIOC to figure out the 78 * bus numbers for the PXB channels. 79 * 80 * Since the MIOC doesn't have a pci bus attached, we 81 * pretend it wasn't there. 82 */ 83 return (0); 84 case 0x84cb8086: 85 switch (slot) { 86 case 0x12: 87 /* Intel 82454NX PXB#0, Bus#A */ 88 *busnum = read_config(bus, 0x10, func, 0xd0, 1); 89 break; 90 case 0x13: 91 /* Intel 82454NX PXB#0, Bus#B */ 92 *busnum = read_config(bus, 0x10, func, 0xd1, 1) + 1; 93 break; 94 case 0x14: 95 /* Intel 82454NX PXB#1, Bus#A */ 96 *busnum = read_config(bus, 0x10, func, 0xd3, 1); 97 break; 98 case 0x15: 99 /* Intel 82454NX PXB#1, Bus#B */ 100 *busnum = read_config(bus, 0x10, func, 0xd4, 1) + 1; 101 break; 102 } 103 break; 104 105 /* ServerWorks -- vendor 0x1166 */ 106 case 0x00051166: 107 case 0x00061166: 108 case 0x00081166: 109 case 0x00091166: 110 case 0x00101166: 111 case 0x00111166: 112 case 0x00171166: 113 case 0x01011166: 114 case 0x010f1014: 115 case 0x01101166: 116 case 0x02011166: 117 case 0x02251166: 118 case 0x03021014: 119 *busnum = read_config(bus, slot, func, 0x44, 1); 120 break; 121 122 /* Compaq/HP -- vendor 0x0e11 */ 123 case 0x60100e11: 124 *busnum = read_config(bus, slot, func, 0xc8, 1); 125 break; 126 default: 127 /* Don't know how to read bus number. */ 128 return 0; 129 } 130 131 return 1; 132 } 133 134 #ifdef NEW_PCIB 135 /* 136 * Return a pointer to a pretty name for a PCI device. If the device 137 * has a driver attached, the device's name is used, otherwise a name 138 * is generated from the device's PCI address. 139 */ 140 const char * 141 pcib_child_name(device_t child) 142 { 143 static char buf[64]; 144 145 if (device_get_nameunit(child) != NULL) 146 return (device_get_nameunit(child)); 147 snprintf(buf, sizeof(buf), "pci%d:%d:%d:%d", pci_get_domain(child), 148 pci_get_bus(child), pci_get_slot(child), pci_get_function(child)); 149 return (buf); 150 } 151 152 /* 153 * Some Host-PCI bridge drivers know which resource ranges they can 154 * decode and should only allocate subranges to child PCI devices. 155 * This API provides a way to manage this. The bridge driver should 156 * initialize this structure during attach and call 157 * pcib_host_res_decodes() on each resource range it decodes. It can 158 * then use pcib_host_res_alloc() and pcib_host_res_adjust() as helper 159 * routines for BUS_ALLOC_RESOURCE() and BUS_ADJUST_RESOURCE(). This 160 * API assumes that resources for any decoded ranges can be safely 161 * allocated from the parent via bus_generic_alloc_resource(). 162 */ 163 int 164 pcib_host_res_init(device_t pcib, struct pcib_host_resources *hr) 165 { 166 167 hr->hr_pcib = pcib; 168 resource_list_init(&hr->hr_rl); 169 return (0); 170 } 171 172 int 173 pcib_host_res_free(device_t pcib, struct pcib_host_resources *hr) 174 { 175 176 resource_list_free(&hr->hr_rl); 177 return (0); 178 } 179 180 int 181 pcib_host_res_decodes(struct pcib_host_resources *hr, int type, u_long start, 182 u_long end, u_int flags) 183 { 184 struct resource_list_entry *rle; 185 int rid; 186 187 if (bootverbose) 188 device_printf(hr->hr_pcib, "decoding %d %srange %#lx-%#lx\n", 189 type, flags & RF_PREFETCHABLE ? "prefetchable ": "", start, 190 end); 191 rid = resource_list_add_next(&hr->hr_rl, type, start, end, 192 end - start + 1); 193 if (flags & RF_PREFETCHABLE) { 194 KASSERT(type == SYS_RES_MEMORY, 195 ("only memory is prefetchable")); 196 rle = resource_list_find(&hr->hr_rl, type, rid); 197 rle->flags = RLE_PREFETCH; 198 } 199 return (0); 200 } 201 202 struct resource * 203 pcib_host_res_alloc(struct pcib_host_resources *hr, device_t dev, int type, 204 int *rid, u_long start, u_long end, u_long count, u_int flags) 205 { 206 struct resource_list_entry *rle; 207 struct resource *r; 208 u_long new_start, new_end; 209 210 if (flags & RF_PREFETCHABLE) 211 KASSERT(type == SYS_RES_MEMORY, 212 ("only memory is prefetchable")); 213 214 rle = resource_list_find(&hr->hr_rl, type, 0); 215 if (rle == NULL) { 216 /* 217 * No decoding ranges for this resource type, just pass 218 * the request up to the parent. 219 */ 220 return (bus_generic_alloc_resource(hr->hr_pcib, dev, type, rid, 221 start, end, count, flags)); 222 } 223 224 restart: 225 /* Try to allocate from each decoded range. */ 226 for (; rle != NULL; rle = STAILQ_NEXT(rle, link)) { 227 if (rle->type != type) 228 continue; 229 if (((flags & RF_PREFETCHABLE) != 0) != 230 ((rle->flags & RLE_PREFETCH) != 0)) 231 continue; 232 new_start = ulmax(start, rle->start); 233 new_end = ulmin(end, rle->end); 234 if (new_start > new_end || 235 new_start + count - 1 > new_end || 236 new_start + count < new_start) 237 continue; 238 r = bus_generic_alloc_resource(hr->hr_pcib, dev, type, rid, 239 new_start, new_end, count, flags); 240 if (r != NULL) { 241 if (bootverbose) 242 device_printf(hr->hr_pcib, 243 "allocated type %d (%#lx-%#lx) for rid %x of %s\n", 244 type, rman_get_start(r), rman_get_end(r), 245 *rid, pcib_child_name(dev)); 246 return (r); 247 } 248 } 249 250 /* 251 * If we failed to find a prefetch range for a memory 252 * resource, try again without prefetch. 253 */ 254 if (flags & RF_PREFETCHABLE) { 255 flags &= ~RF_PREFETCHABLE; 256 rle = resource_list_find(&hr->hr_rl, type, 0); 257 goto restart; 258 } 259 return (NULL); 260 } 261 262 int 263 pcib_host_res_adjust(struct pcib_host_resources *hr, device_t dev, int type, 264 struct resource *r, u_long start, u_long end) 265 { 266 struct resource_list_entry *rle; 267 268 rle = resource_list_find(&hr->hr_rl, type, 0); 269 if (rle == NULL) { 270 /* 271 * No decoding ranges for this resource type, just pass 272 * the request up to the parent. 273 */ 274 return (bus_generic_adjust_resource(hr->hr_pcib, dev, type, r, 275 start, end)); 276 } 277 278 /* Only allow adjustments that stay within a decoded range. */ 279 for (; rle != NULL; rle = STAILQ_NEXT(rle, link)) { 280 if (rle->start <= start && rle->end >= end) 281 return (bus_generic_adjust_resource(hr->hr_pcib, dev, 282 type, r, start, end)); 283 } 284 return (ERANGE); 285 } 286 287 #ifdef PCI_RES_BUS 288 struct pci_domain { 289 int pd_domain; 290 struct rman pd_bus_rman; 291 TAILQ_ENTRY(pci_domain) pd_link; 292 }; 293 294 static TAILQ_HEAD(, pci_domain) domains = TAILQ_HEAD_INITIALIZER(domains); 295 296 /* 297 * Each PCI domain maintains its own resource manager for PCI bus 298 * numbers in that domain. Domain objects are created on first use. 299 * Host to PCI bridge drivers and PCI-PCI bridge drivers should 300 * allocate their bus ranges from their domain. 301 */ 302 static struct pci_domain * 303 pci_find_domain(int domain) 304 { 305 struct pci_domain *d; 306 char buf[64]; 307 int error; 308 309 TAILQ_FOREACH(d, &domains, pd_link) { 310 if (d->pd_domain == domain) 311 return (d); 312 } 313 314 snprintf(buf, sizeof(buf), "PCI domain %d bus numbers", domain); 315 d = malloc(sizeof(*d) + strlen(buf) + 1, M_DEVBUF, M_WAITOK | M_ZERO); 316 d->pd_domain = domain; 317 d->pd_bus_rman.rm_start = 0; 318 d->pd_bus_rman.rm_end = PCI_BUSMAX; 319 d->pd_bus_rman.rm_type = RMAN_ARRAY; 320 strcpy((char *)(d + 1), buf); 321 d->pd_bus_rman.rm_descr = (char *)(d + 1); 322 error = rman_init(&d->pd_bus_rman); 323 if (error == 0) 324 error = rman_manage_region(&d->pd_bus_rman, 0, PCI_BUSMAX); 325 if (error) 326 panic("Failed to initialize PCI domain %d rman", domain); 327 TAILQ_INSERT_TAIL(&domains, d, pd_link); 328 return (d); 329 } 330 331 struct resource * 332 pci_domain_alloc_bus(int domain, device_t dev, int *rid, u_long start, 333 u_long end, u_long count, u_int flags) 334 { 335 struct pci_domain *d; 336 struct resource *res; 337 338 if (domain < 0 || domain > PCI_DOMAINMAX) 339 return (NULL); 340 d = pci_find_domain(domain); 341 res = rman_reserve_resource(&d->pd_bus_rman, start, end, count, flags, 342 dev); 343 if (res == NULL) 344 return (NULL); 345 346 rman_set_rid(res, *rid); 347 return (res); 348 } 349 350 int 351 pci_domain_adjust_bus(int domain, device_t dev, struct resource *r, 352 u_long start, u_long end) 353 { 354 #ifdef INVARIANTS 355 struct pci_domain *d; 356 #endif 357 358 if (domain < 0 || domain > PCI_DOMAINMAX) 359 return (EINVAL); 360 #ifdef INVARIANTS 361 d = pci_find_domain(domain); 362 KASSERT(rman_is_region_manager(r, &d->pd_bus_rman), ("bad resource")); 363 #endif 364 return (rman_adjust_resource(r, start, end)); 365 } 366 367 int 368 pci_domain_release_bus(int domain, device_t dev, int rid, struct resource *r) 369 { 370 #ifdef INVARIANTS 371 struct pci_domain *d; 372 #endif 373 374 if (domain < 0 || domain > PCI_DOMAINMAX) 375 return (EINVAL); 376 #ifdef INVARIANTS 377 d = pci_find_domain(domain); 378 KASSERT(rman_is_region_manager(r, &d->pd_bus_rman), ("bad resource")); 379 #endif 380 return (rman_release_resource(r)); 381 } 382 #endif /* PCI_RES_BUS */ 383 384 #endif /* NEW_PCIB */ 385