1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier 5 * Copyright (c) 2000 Michael Smith <msmith@freebsd.org> 6 * Copyright (c) 2000 BSDi 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 /* 35 * PCI:PCI bridge support. 36 */ 37 38 #include "opt_pci.h" 39 40 #include <sys/param.h> 41 #include <sys/bus.h> 42 #include <sys/kernel.h> 43 #include <sys/lock.h> 44 #include <sys/malloc.h> 45 #include <sys/module.h> 46 #include <sys/mutex.h> 47 #include <sys/pciio.h> 48 #include <sys/rman.h> 49 #include <sys/sysctl.h> 50 #include <sys/systm.h> 51 #include <sys/taskqueue.h> 52 53 #include <dev/pci/pcivar.h> 54 #include <dev/pci/pcireg.h> 55 #include <dev/pci/pci_private.h> 56 #include <dev/pci/pcib_private.h> 57 58 #include "pcib_if.h" 59 60 static int pcib_probe(device_t dev); 61 static int pcib_suspend(device_t dev); 62 static int pcib_resume(device_t dev); 63 64 static bus_child_present_t pcib_child_present; 65 static bus_alloc_resource_t pcib_alloc_resource; 66 #ifdef NEW_PCIB 67 static bus_adjust_resource_t pcib_adjust_resource; 68 static bus_release_resource_t pcib_release_resource; 69 static bus_activate_resource_t pcib_activate_resource; 70 static bus_deactivate_resource_t pcib_deactivate_resource; 71 static bus_map_resource_t pcib_map_resource; 72 static bus_unmap_resource_t pcib_unmap_resource; 73 #endif 74 static int pcib_reset_child(device_t dev, device_t child, int flags); 75 76 static int pcib_power_for_sleep(device_t pcib, device_t dev, 77 int *pstate); 78 static int pcib_ari_get_id(device_t pcib, device_t dev, 79 enum pci_id_type type, uintptr_t *id); 80 static uint32_t pcib_read_config(device_t dev, u_int b, u_int s, 81 u_int f, u_int reg, int width); 82 static void pcib_write_config(device_t dev, u_int b, u_int s, 83 u_int f, u_int reg, uint32_t val, int width); 84 static int pcib_ari_maxslots(device_t dev); 85 static int pcib_ari_maxfuncs(device_t dev); 86 static int pcib_try_enable_ari(device_t pcib, device_t dev); 87 static int pcib_ari_enabled(device_t pcib); 88 static void pcib_ari_decode_rid(device_t pcib, uint16_t rid, 89 int *bus, int *slot, int *func); 90 #ifdef PCI_HP 91 static void pcib_pcie_ab_timeout(void *arg, int pending); 92 static void pcib_pcie_cc_timeout(void *arg, int pending); 93 static void pcib_pcie_dll_timeout(void *arg, int pending); 94 #endif 95 static int pcib_request_feature_default(device_t pcib, device_t dev, 96 enum pci_feature feature); 97 98 static device_method_t pcib_methods[] = { 99 /* Device interface */ 100 DEVMETHOD(device_probe, pcib_probe), 101 DEVMETHOD(device_attach, pcib_attach), 102 DEVMETHOD(device_detach, pcib_detach), 103 DEVMETHOD(device_shutdown, bus_generic_shutdown), 104 DEVMETHOD(device_suspend, pcib_suspend), 105 DEVMETHOD(device_resume, pcib_resume), 106 107 /* Bus interface */ 108 DEVMETHOD(bus_child_present, pcib_child_present), 109 DEVMETHOD(bus_read_ivar, pcib_read_ivar), 110 DEVMETHOD(bus_write_ivar, pcib_write_ivar), 111 DEVMETHOD(bus_alloc_resource, pcib_alloc_resource), 112 #ifdef NEW_PCIB 113 DEVMETHOD(bus_adjust_resource, pcib_adjust_resource), 114 DEVMETHOD(bus_release_resource, pcib_release_resource), 115 DEVMETHOD(bus_activate_resource, pcib_activate_resource), 116 DEVMETHOD(bus_deactivate_resource, pcib_deactivate_resource), 117 DEVMETHOD(bus_map_resource, pcib_map_resource), 118 DEVMETHOD(bus_unmap_resource, pcib_unmap_resource), 119 #else 120 DEVMETHOD(bus_adjust_resource, bus_generic_adjust_resource), 121 DEVMETHOD(bus_release_resource, bus_generic_release_resource), 122 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 123 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 124 #endif 125 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 126 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 127 DEVMETHOD(bus_reset_child, pcib_reset_child), 128 129 /* pcib interface */ 130 DEVMETHOD(pcib_maxslots, pcib_ari_maxslots), 131 DEVMETHOD(pcib_maxfuncs, pcib_ari_maxfuncs), 132 DEVMETHOD(pcib_read_config, pcib_read_config), 133 DEVMETHOD(pcib_write_config, pcib_write_config), 134 DEVMETHOD(pcib_route_interrupt, pcib_route_interrupt), 135 DEVMETHOD(pcib_alloc_msi, pcib_alloc_msi), 136 DEVMETHOD(pcib_release_msi, pcib_release_msi), 137 DEVMETHOD(pcib_alloc_msix, pcib_alloc_msix), 138 DEVMETHOD(pcib_release_msix, pcib_release_msix), 139 DEVMETHOD(pcib_map_msi, pcib_map_msi), 140 DEVMETHOD(pcib_power_for_sleep, pcib_power_for_sleep), 141 DEVMETHOD(pcib_get_id, pcib_ari_get_id), 142 DEVMETHOD(pcib_try_enable_ari, pcib_try_enable_ari), 143 DEVMETHOD(pcib_ari_enabled, pcib_ari_enabled), 144 DEVMETHOD(pcib_decode_rid, pcib_ari_decode_rid), 145 DEVMETHOD(pcib_request_feature, pcib_request_feature_default), 146 147 DEVMETHOD_END 148 }; 149 150 DEFINE_CLASS_0(pcib, pcib_driver, pcib_methods, sizeof(struct pcib_softc)); 151 EARLY_DRIVER_MODULE(pcib, pci, pcib_driver, NULL, NULL, BUS_PASS_BUS); 152 153 #if defined(NEW_PCIB) || defined(PCI_HP) 154 SYSCTL_DECL(_hw_pci); 155 #endif 156 157 #ifdef NEW_PCIB 158 static int pci_clear_pcib; 159 SYSCTL_INT(_hw_pci, OID_AUTO, clear_pcib, CTLFLAG_RDTUN, &pci_clear_pcib, 0, 160 "Clear firmware-assigned resources for PCI-PCI bridge I/O windows."); 161 162 /* 163 * Get the corresponding window if this resource from a child device was 164 * sub-allocated from one of our window resource managers. 165 */ 166 static struct pcib_window * 167 pcib_get_resource_window(struct pcib_softc *sc, struct resource *r) 168 { 169 switch (rman_get_type(r)) { 170 case SYS_RES_IOPORT: 171 if (rman_is_region_manager(r, &sc->io.rman)) 172 return (&sc->io); 173 break; 174 case SYS_RES_MEMORY: 175 /* Prefetchable resources may live in either memory rman. */ 176 if (rman_get_flags(r) & RF_PREFETCHABLE && 177 rman_is_region_manager(r, &sc->pmem.rman)) 178 return (&sc->pmem); 179 if (rman_is_region_manager(r, &sc->mem.rman)) 180 return (&sc->mem); 181 break; 182 } 183 return (NULL); 184 } 185 186 /* 187 * Is a resource from a child device sub-allocated from one of our 188 * resource managers? 189 */ 190 static int 191 pcib_is_resource_managed(struct pcib_softc *sc, struct resource *r) 192 { 193 194 #ifdef PCI_RES_BUS 195 if (rman_get_type(r) == PCI_RES_BUS) 196 return (rman_is_region_manager(r, &sc->bus.rman)); 197 #endif 198 return (pcib_get_resource_window(sc, r) != NULL); 199 } 200 201 static int 202 pcib_is_window_open(struct pcib_window *pw) 203 { 204 205 return (pw->valid && pw->base < pw->limit); 206 } 207 208 /* 209 * XXX: If RF_ACTIVE did not also imply allocating a bus space tag and 210 * handle for the resource, we could pass RF_ACTIVE up to the PCI bus 211 * when allocating the resource windows and rely on the PCI bus driver 212 * to do this for us. 213 */ 214 static void 215 pcib_activate_window(struct pcib_softc *sc, int type) 216 { 217 218 PCI_ENABLE_IO(device_get_parent(sc->dev), sc->dev, type); 219 } 220 221 static void 222 pcib_write_windows(struct pcib_softc *sc, int mask) 223 { 224 device_t dev; 225 uint32_t val; 226 227 dev = sc->dev; 228 if (sc->io.valid && mask & WIN_IO) { 229 val = pci_read_config(dev, PCIR_IOBASEL_1, 1); 230 if ((val & PCIM_BRIO_MASK) == PCIM_BRIO_32) { 231 pci_write_config(dev, PCIR_IOBASEH_1, 232 sc->io.base >> 16, 2); 233 pci_write_config(dev, PCIR_IOLIMITH_1, 234 sc->io.limit >> 16, 2); 235 } 236 pci_write_config(dev, PCIR_IOBASEL_1, sc->io.base >> 8, 1); 237 pci_write_config(dev, PCIR_IOLIMITL_1, sc->io.limit >> 8, 1); 238 } 239 240 if (mask & WIN_MEM) { 241 pci_write_config(dev, PCIR_MEMBASE_1, sc->mem.base >> 16, 2); 242 pci_write_config(dev, PCIR_MEMLIMIT_1, sc->mem.limit >> 16, 2); 243 } 244 245 if (sc->pmem.valid && mask & WIN_PMEM) { 246 val = pci_read_config(dev, PCIR_PMBASEL_1, 2); 247 if ((val & PCIM_BRPM_MASK) == PCIM_BRPM_64) { 248 pci_write_config(dev, PCIR_PMBASEH_1, 249 sc->pmem.base >> 32, 4); 250 pci_write_config(dev, PCIR_PMLIMITH_1, 251 sc->pmem.limit >> 32, 4); 252 } 253 pci_write_config(dev, PCIR_PMBASEL_1, sc->pmem.base >> 16, 2); 254 pci_write_config(dev, PCIR_PMLIMITL_1, sc->pmem.limit >> 16, 2); 255 } 256 } 257 258 /* 259 * This is used to reject I/O port allocations that conflict with an 260 * ISA alias range. 261 */ 262 static int 263 pcib_is_isa_range(struct pcib_softc *sc, rman_res_t start, rman_res_t end, 264 rman_res_t count) 265 { 266 rman_res_t next_alias; 267 268 if (!(sc->bridgectl & PCIB_BCR_ISA_ENABLE)) 269 return (0); 270 271 /* Only check fixed ranges for overlap. */ 272 if (start + count - 1 != end) 273 return (0); 274 275 /* ISA aliases are only in the lower 64KB of I/O space. */ 276 if (start >= 65536) 277 return (0); 278 279 /* Check for overlap with 0x000 - 0x0ff as a special case. */ 280 if (start < 0x100) 281 goto alias; 282 283 /* 284 * If the start address is an alias, the range is an alias. 285 * Otherwise, compute the start of the next alias range and 286 * check if it is before the end of the candidate range. 287 */ 288 if ((start & 0x300) != 0) 289 goto alias; 290 next_alias = (start & ~0x3fful) | 0x100; 291 if (next_alias <= end) 292 goto alias; 293 return (0); 294 295 alias: 296 if (bootverbose) 297 device_printf(sc->dev, 298 "I/O range %#jx-%#jx overlaps with an ISA alias\n", start, 299 end); 300 return (1); 301 } 302 303 static void 304 pcib_add_window_resources(struct pcib_window *w, struct resource **res, 305 int count) 306 { 307 struct resource **newarray; 308 int error, i; 309 310 newarray = malloc(sizeof(struct resource *) * (w->count + count), 311 M_DEVBUF, M_WAITOK); 312 if (w->res != NULL) 313 bcopy(w->res, newarray, sizeof(struct resource *) * w->count); 314 bcopy(res, newarray + w->count, sizeof(struct resource *) * count); 315 free(w->res, M_DEVBUF); 316 w->res = newarray; 317 w->count += count; 318 319 for (i = 0; i < count; i++) { 320 error = rman_manage_region(&w->rman, rman_get_start(res[i]), 321 rman_get_end(res[i])); 322 if (error) 323 panic("Failed to add resource to rman"); 324 } 325 } 326 327 typedef void (nonisa_callback)(rman_res_t start, rman_res_t end, void *arg); 328 329 static void 330 pcib_walk_nonisa_ranges(rman_res_t start, rman_res_t end, nonisa_callback *cb, 331 void *arg) 332 { 333 rman_res_t next_end; 334 335 /* 336 * If start is within an ISA alias range, move up to the start 337 * of the next non-alias range. As a special case, addresses 338 * in the range 0x000 - 0x0ff should also be skipped since 339 * those are used for various system I/O devices in ISA 340 * systems. 341 */ 342 if (start <= 65535) { 343 if (start < 0x100 || (start & 0x300) != 0) { 344 start &= ~0x3ff; 345 start += 0x400; 346 } 347 } 348 349 /* ISA aliases are only in the lower 64KB of I/O space. */ 350 while (start <= MIN(end, 65535)) { 351 next_end = MIN(start | 0xff, end); 352 cb(start, next_end, arg); 353 start += 0x400; 354 } 355 356 if (start <= end) 357 cb(start, end, arg); 358 } 359 360 static void 361 count_ranges(rman_res_t start, rman_res_t end, void *arg) 362 { 363 int *countp; 364 365 countp = arg; 366 (*countp)++; 367 } 368 369 struct alloc_state { 370 struct resource **res; 371 struct pcib_softc *sc; 372 int count, error; 373 }; 374 375 static void 376 alloc_ranges(rman_res_t start, rman_res_t end, void *arg) 377 { 378 struct alloc_state *as; 379 struct pcib_window *w; 380 int rid; 381 382 as = arg; 383 if (as->error != 0) 384 return; 385 386 w = &as->sc->io; 387 rid = w->reg; 388 if (bootverbose) 389 device_printf(as->sc->dev, 390 "allocating non-ISA range %#jx-%#jx\n", start, end); 391 as->res[as->count] = bus_alloc_resource(as->sc->dev, SYS_RES_IOPORT, 392 &rid, start, end, end - start + 1, RF_ACTIVE | RF_UNMAPPED); 393 if (as->res[as->count] == NULL) 394 as->error = ENXIO; 395 else 396 as->count++; 397 } 398 399 static int 400 pcib_alloc_nonisa_ranges(struct pcib_softc *sc, rman_res_t start, rman_res_t end) 401 { 402 struct alloc_state as; 403 int i, new_count; 404 405 /* First, see how many ranges we need. */ 406 new_count = 0; 407 pcib_walk_nonisa_ranges(start, end, count_ranges, &new_count); 408 409 /* Second, allocate the ranges. */ 410 as.res = malloc(sizeof(struct resource *) * new_count, M_DEVBUF, 411 M_WAITOK); 412 as.sc = sc; 413 as.count = 0; 414 as.error = 0; 415 pcib_walk_nonisa_ranges(start, end, alloc_ranges, &as); 416 if (as.error != 0) { 417 for (i = 0; i < as.count; i++) 418 bus_release_resource(sc->dev, SYS_RES_IOPORT, 419 sc->io.reg, as.res[i]); 420 free(as.res, M_DEVBUF); 421 return (as.error); 422 } 423 KASSERT(as.count == new_count, ("%s: count mismatch", __func__)); 424 425 /* Third, add the ranges to the window. */ 426 pcib_add_window_resources(&sc->io, as.res, as.count); 427 free(as.res, M_DEVBUF); 428 return (0); 429 } 430 431 static void 432 pcib_alloc_window(struct pcib_softc *sc, struct pcib_window *w, int type, 433 int flags, pci_addr_t max_address) 434 { 435 struct resource *res; 436 char buf[64]; 437 int error, rid; 438 439 if (max_address != (rman_res_t)max_address) 440 max_address = ~0; 441 w->rman.rm_start = 0; 442 w->rman.rm_end = max_address; 443 w->rman.rm_type = RMAN_ARRAY; 444 snprintf(buf, sizeof(buf), "%s %s window", 445 device_get_nameunit(sc->dev), w->name); 446 w->rman.rm_descr = strdup(buf, M_DEVBUF); 447 error = rman_init(&w->rman); 448 if (error) 449 panic("Failed to initialize %s %s rman", 450 device_get_nameunit(sc->dev), w->name); 451 452 if (!pcib_is_window_open(w)) 453 return; 454 455 if (w->base > max_address || w->limit > max_address) { 456 device_printf(sc->dev, 457 "initial %s window has too many bits, ignoring\n", w->name); 458 return; 459 } 460 if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE) 461 (void)pcib_alloc_nonisa_ranges(sc, w->base, w->limit); 462 else { 463 rid = w->reg; 464 res = bus_alloc_resource(sc->dev, type, &rid, w->base, w->limit, 465 w->limit - w->base + 1, flags | RF_ACTIVE | RF_UNMAPPED); 466 if (res != NULL) 467 pcib_add_window_resources(w, &res, 1); 468 } 469 if (w->res == NULL) { 470 device_printf(sc->dev, 471 "failed to allocate initial %s window: %#jx-%#jx\n", 472 w->name, (uintmax_t)w->base, (uintmax_t)w->limit); 473 w->base = max_address; 474 w->limit = 0; 475 pcib_write_windows(sc, w->mask); 476 return; 477 } 478 pcib_activate_window(sc, type); 479 } 480 481 /* 482 * Initialize I/O windows. 483 */ 484 static void 485 pcib_probe_windows(struct pcib_softc *sc) 486 { 487 pci_addr_t max; 488 device_t dev; 489 uint32_t val; 490 491 dev = sc->dev; 492 493 if (pci_clear_pcib) { 494 pcib_bridge_init(dev); 495 } 496 497 /* Determine if the I/O port window is implemented. */ 498 val = pci_read_config(dev, PCIR_IOBASEL_1, 1); 499 if (val == 0) { 500 /* 501 * If 'val' is zero, then only 16-bits of I/O space 502 * are supported. 503 */ 504 pci_write_config(dev, PCIR_IOBASEL_1, 0xff, 1); 505 if (pci_read_config(dev, PCIR_IOBASEL_1, 1) != 0) { 506 sc->io.valid = 1; 507 pci_write_config(dev, PCIR_IOBASEL_1, 0, 1); 508 } 509 } else 510 sc->io.valid = 1; 511 512 /* Read the existing I/O port window. */ 513 if (sc->io.valid) { 514 sc->io.reg = PCIR_IOBASEL_1; 515 sc->io.step = 12; 516 sc->io.mask = WIN_IO; 517 sc->io.name = "I/O port"; 518 if ((val & PCIM_BRIO_MASK) == PCIM_BRIO_32) { 519 sc->io.base = PCI_PPBIOBASE( 520 pci_read_config(dev, PCIR_IOBASEH_1, 2), val); 521 sc->io.limit = PCI_PPBIOLIMIT( 522 pci_read_config(dev, PCIR_IOLIMITH_1, 2), 523 pci_read_config(dev, PCIR_IOLIMITL_1, 1)); 524 max = 0xffffffff; 525 } else { 526 sc->io.base = PCI_PPBIOBASE(0, val); 527 sc->io.limit = PCI_PPBIOLIMIT(0, 528 pci_read_config(dev, PCIR_IOLIMITL_1, 1)); 529 max = 0xffff; 530 } 531 pcib_alloc_window(sc, &sc->io, SYS_RES_IOPORT, 0, max); 532 } 533 534 /* Read the existing memory window. */ 535 sc->mem.valid = 1; 536 sc->mem.reg = PCIR_MEMBASE_1; 537 sc->mem.step = 20; 538 sc->mem.mask = WIN_MEM; 539 sc->mem.name = "memory"; 540 sc->mem.base = PCI_PPBMEMBASE(0, 541 pci_read_config(dev, PCIR_MEMBASE_1, 2)); 542 sc->mem.limit = PCI_PPBMEMLIMIT(0, 543 pci_read_config(dev, PCIR_MEMLIMIT_1, 2)); 544 pcib_alloc_window(sc, &sc->mem, SYS_RES_MEMORY, 0, 0xffffffff); 545 546 /* Determine if the prefetchable memory window is implemented. */ 547 val = pci_read_config(dev, PCIR_PMBASEL_1, 2); 548 if (val == 0) { 549 /* 550 * If 'val' is zero, then only 32-bits of memory space 551 * are supported. 552 */ 553 pci_write_config(dev, PCIR_PMBASEL_1, 0xffff, 2); 554 if (pci_read_config(dev, PCIR_PMBASEL_1, 2) != 0) { 555 sc->pmem.valid = 1; 556 pci_write_config(dev, PCIR_PMBASEL_1, 0, 2); 557 } 558 } else 559 sc->pmem.valid = 1; 560 561 /* Read the existing prefetchable memory window. */ 562 if (sc->pmem.valid) { 563 sc->pmem.reg = PCIR_PMBASEL_1; 564 sc->pmem.step = 20; 565 sc->pmem.mask = WIN_PMEM; 566 sc->pmem.name = "prefetch"; 567 if ((val & PCIM_BRPM_MASK) == PCIM_BRPM_64) { 568 sc->pmem.base = PCI_PPBMEMBASE( 569 pci_read_config(dev, PCIR_PMBASEH_1, 4), val); 570 sc->pmem.limit = PCI_PPBMEMLIMIT( 571 pci_read_config(dev, PCIR_PMLIMITH_1, 4), 572 pci_read_config(dev, PCIR_PMLIMITL_1, 2)); 573 max = 0xffffffffffffffff; 574 } else { 575 sc->pmem.base = PCI_PPBMEMBASE(0, val); 576 sc->pmem.limit = PCI_PPBMEMLIMIT(0, 577 pci_read_config(dev, PCIR_PMLIMITL_1, 2)); 578 max = 0xffffffff; 579 } 580 pcib_alloc_window(sc, &sc->pmem, SYS_RES_MEMORY, 581 RF_PREFETCHABLE, max); 582 } 583 } 584 585 static void 586 pcib_release_window(struct pcib_softc *sc, struct pcib_window *w, int type) 587 { 588 device_t dev; 589 int error, i; 590 591 if (!w->valid) 592 return; 593 594 dev = sc->dev; 595 error = rman_fini(&w->rman); 596 if (error) { 597 device_printf(dev, "failed to release %s rman\n", w->name); 598 return; 599 } 600 free(__DECONST(char *, w->rman.rm_descr), M_DEVBUF); 601 602 for (i = 0; i < w->count; i++) { 603 error = bus_free_resource(dev, type, w->res[i]); 604 if (error) 605 device_printf(dev, 606 "failed to release %s resource: %d\n", w->name, 607 error); 608 } 609 free(w->res, M_DEVBUF); 610 } 611 612 static void 613 pcib_free_windows(struct pcib_softc *sc) 614 { 615 616 pcib_release_window(sc, &sc->pmem, SYS_RES_MEMORY); 617 pcib_release_window(sc, &sc->mem, SYS_RES_MEMORY); 618 pcib_release_window(sc, &sc->io, SYS_RES_IOPORT); 619 } 620 621 #ifdef PCI_RES_BUS 622 /* 623 * Allocate a suitable secondary bus for this bridge if needed and 624 * initialize the resource manager for the secondary bus range. Note 625 * that the minimum count is a desired value and this may allocate a 626 * smaller range. 627 */ 628 void 629 pcib_setup_secbus(device_t dev, struct pcib_secbus *bus, int min_count) 630 { 631 char buf[64]; 632 int error, rid, sec_reg; 633 634 switch (pci_read_config(dev, PCIR_HDRTYPE, 1) & PCIM_HDRTYPE) { 635 case PCIM_HDRTYPE_BRIDGE: 636 sec_reg = PCIR_SECBUS_1; 637 bus->sub_reg = PCIR_SUBBUS_1; 638 break; 639 case PCIM_HDRTYPE_CARDBUS: 640 sec_reg = PCIR_SECBUS_2; 641 bus->sub_reg = PCIR_SUBBUS_2; 642 break; 643 default: 644 panic("not a PCI bridge"); 645 } 646 bus->sec = pci_read_config(dev, sec_reg, 1); 647 bus->sub = pci_read_config(dev, bus->sub_reg, 1); 648 bus->dev = dev; 649 bus->rman.rm_start = 0; 650 bus->rman.rm_end = PCI_BUSMAX; 651 bus->rman.rm_type = RMAN_ARRAY; 652 snprintf(buf, sizeof(buf), "%s bus numbers", device_get_nameunit(dev)); 653 bus->rman.rm_descr = strdup(buf, M_DEVBUF); 654 error = rman_init(&bus->rman); 655 if (error) 656 panic("Failed to initialize %s bus number rman", 657 device_get_nameunit(dev)); 658 659 /* 660 * Allocate a bus range. This will return an existing bus range 661 * if one exists, or a new bus range if one does not. 662 */ 663 rid = 0; 664 bus->res = bus_alloc_resource_anywhere(dev, PCI_RES_BUS, &rid, 665 min_count, RF_ACTIVE); 666 if (bus->res == NULL) { 667 /* 668 * Fall back to just allocating a range of a single bus 669 * number. 670 */ 671 bus->res = bus_alloc_resource_anywhere(dev, PCI_RES_BUS, &rid, 672 1, RF_ACTIVE); 673 } else if (rman_get_size(bus->res) < min_count) 674 /* 675 * Attempt to grow the existing range to satisfy the 676 * minimum desired count. 677 */ 678 (void)bus_adjust_resource(dev, PCI_RES_BUS, bus->res, 679 rman_get_start(bus->res), rman_get_start(bus->res) + 680 min_count - 1); 681 682 /* 683 * Add the initial resource to the rman. 684 */ 685 if (bus->res != NULL) { 686 error = rman_manage_region(&bus->rman, rman_get_start(bus->res), 687 rman_get_end(bus->res)); 688 if (error) 689 panic("Failed to add resource to rman"); 690 bus->sec = rman_get_start(bus->res); 691 bus->sub = rman_get_end(bus->res); 692 } 693 } 694 695 void 696 pcib_free_secbus(device_t dev, struct pcib_secbus *bus) 697 { 698 int error; 699 700 error = rman_fini(&bus->rman); 701 if (error) { 702 device_printf(dev, "failed to release bus number rman\n"); 703 return; 704 } 705 free(__DECONST(char *, bus->rman.rm_descr), M_DEVBUF); 706 707 error = bus_free_resource(dev, PCI_RES_BUS, bus->res); 708 if (error) 709 device_printf(dev, 710 "failed to release bus numbers resource: %d\n", error); 711 } 712 713 static struct resource * 714 pcib_suballoc_bus(struct pcib_secbus *bus, device_t child, int *rid, 715 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 716 { 717 struct resource *res; 718 719 res = rman_reserve_resource(&bus->rman, start, end, count, flags, 720 child); 721 if (res == NULL) 722 return (NULL); 723 724 if (bootverbose) 725 device_printf(bus->dev, 726 "allocated bus range (%ju-%ju) for rid %d of %s\n", 727 rman_get_start(res), rman_get_end(res), *rid, 728 pcib_child_name(child)); 729 rman_set_rid(res, *rid); 730 rman_set_type(res, PCI_RES_BUS); 731 return (res); 732 } 733 734 /* 735 * Attempt to grow the secondary bus range. This is much simpler than 736 * for I/O windows as the range can only be grown by increasing 737 * subbus. 738 */ 739 static int 740 pcib_grow_subbus(struct pcib_secbus *bus, rman_res_t new_end) 741 { 742 rman_res_t old_end; 743 int error; 744 745 old_end = rman_get_end(bus->res); 746 KASSERT(new_end > old_end, ("attempt to shrink subbus")); 747 error = bus_adjust_resource(bus->dev, PCI_RES_BUS, bus->res, 748 rman_get_start(bus->res), new_end); 749 if (error) 750 return (error); 751 if (bootverbose) 752 device_printf(bus->dev, "grew bus range to %ju-%ju\n", 753 rman_get_start(bus->res), rman_get_end(bus->res)); 754 error = rman_manage_region(&bus->rman, old_end + 1, 755 rman_get_end(bus->res)); 756 if (error) 757 panic("Failed to add resource to rman"); 758 bus->sub = rman_get_end(bus->res); 759 pci_write_config(bus->dev, bus->sub_reg, bus->sub, 1); 760 return (0); 761 } 762 763 struct resource * 764 pcib_alloc_subbus(struct pcib_secbus *bus, device_t child, int *rid, 765 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 766 { 767 struct resource *res; 768 rman_res_t start_free, end_free, new_end; 769 770 /* 771 * First, see if the request can be satisified by the existing 772 * bus range. 773 */ 774 res = pcib_suballoc_bus(bus, child, rid, start, end, count, flags); 775 if (res != NULL) 776 return (res); 777 778 /* 779 * Figure out a range to grow the bus range. First, find the 780 * first bus number after the last allocated bus in the rman and 781 * enforce that as a minimum starting point for the range. 782 */ 783 if (rman_last_free_region(&bus->rman, &start_free, &end_free) != 0 || 784 end_free != bus->sub) 785 start_free = bus->sub + 1; 786 if (start_free < start) 787 start_free = start; 788 new_end = start_free + count - 1; 789 790 /* 791 * See if this new range would satisfy the request if it 792 * succeeds. 793 */ 794 if (new_end > end) 795 return (NULL); 796 797 /* Finally, attempt to grow the existing resource. */ 798 if (bootverbose) { 799 device_printf(bus->dev, 800 "attempting to grow bus range for %ju buses\n", count); 801 printf("\tback candidate range: %ju-%ju\n", start_free, 802 new_end); 803 } 804 if (pcib_grow_subbus(bus, new_end) == 0) 805 return (pcib_suballoc_bus(bus, child, rid, start, end, count, 806 flags)); 807 return (NULL); 808 } 809 #endif 810 811 #else 812 813 /* 814 * Is the prefetch window open (eg, can we allocate memory in it?) 815 */ 816 static int 817 pcib_is_prefetch_open(struct pcib_softc *sc) 818 { 819 return (sc->pmembase > 0 && sc->pmembase < sc->pmemlimit); 820 } 821 822 /* 823 * Is the nonprefetch window open (eg, can we allocate memory in it?) 824 */ 825 static int 826 pcib_is_nonprefetch_open(struct pcib_softc *sc) 827 { 828 return (sc->membase > 0 && sc->membase < sc->memlimit); 829 } 830 831 /* 832 * Is the io window open (eg, can we allocate ports in it?) 833 */ 834 static int 835 pcib_is_io_open(struct pcib_softc *sc) 836 { 837 return (sc->iobase > 0 && sc->iobase < sc->iolimit); 838 } 839 840 /* 841 * Get current I/O decode. 842 */ 843 static void 844 pcib_get_io_decode(struct pcib_softc *sc) 845 { 846 device_t dev; 847 uint32_t iolow; 848 849 dev = sc->dev; 850 851 iolow = pci_read_config(dev, PCIR_IOBASEL_1, 1); 852 if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) 853 sc->iobase = PCI_PPBIOBASE( 854 pci_read_config(dev, PCIR_IOBASEH_1, 2), iolow); 855 else 856 sc->iobase = PCI_PPBIOBASE(0, iolow); 857 858 iolow = pci_read_config(dev, PCIR_IOLIMITL_1, 1); 859 if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) 860 sc->iolimit = PCI_PPBIOLIMIT( 861 pci_read_config(dev, PCIR_IOLIMITH_1, 2), iolow); 862 else 863 sc->iolimit = PCI_PPBIOLIMIT(0, iolow); 864 } 865 866 /* 867 * Get current memory decode. 868 */ 869 static void 870 pcib_get_mem_decode(struct pcib_softc *sc) 871 { 872 device_t dev; 873 pci_addr_t pmemlow; 874 875 dev = sc->dev; 876 877 sc->membase = PCI_PPBMEMBASE(0, 878 pci_read_config(dev, PCIR_MEMBASE_1, 2)); 879 sc->memlimit = PCI_PPBMEMLIMIT(0, 880 pci_read_config(dev, PCIR_MEMLIMIT_1, 2)); 881 882 pmemlow = pci_read_config(dev, PCIR_PMBASEL_1, 2); 883 if ((pmemlow & PCIM_BRPM_MASK) == PCIM_BRPM_64) 884 sc->pmembase = PCI_PPBMEMBASE( 885 pci_read_config(dev, PCIR_PMBASEH_1, 4), pmemlow); 886 else 887 sc->pmembase = PCI_PPBMEMBASE(0, pmemlow); 888 889 pmemlow = pci_read_config(dev, PCIR_PMLIMITL_1, 2); 890 if ((pmemlow & PCIM_BRPM_MASK) == PCIM_BRPM_64) 891 sc->pmemlimit = PCI_PPBMEMLIMIT( 892 pci_read_config(dev, PCIR_PMLIMITH_1, 4), pmemlow); 893 else 894 sc->pmemlimit = PCI_PPBMEMLIMIT(0, pmemlow); 895 } 896 897 /* 898 * Restore previous I/O decode. 899 */ 900 static void 901 pcib_set_io_decode(struct pcib_softc *sc) 902 { 903 device_t dev; 904 uint32_t iohi; 905 906 dev = sc->dev; 907 908 iohi = sc->iobase >> 16; 909 if (iohi > 0) 910 pci_write_config(dev, PCIR_IOBASEH_1, iohi, 2); 911 pci_write_config(dev, PCIR_IOBASEL_1, sc->iobase >> 8, 1); 912 913 iohi = sc->iolimit >> 16; 914 if (iohi > 0) 915 pci_write_config(dev, PCIR_IOLIMITH_1, iohi, 2); 916 pci_write_config(dev, PCIR_IOLIMITL_1, sc->iolimit >> 8, 1); 917 } 918 919 /* 920 * Restore previous memory decode. 921 */ 922 static void 923 pcib_set_mem_decode(struct pcib_softc *sc) 924 { 925 device_t dev; 926 pci_addr_t pmemhi; 927 928 dev = sc->dev; 929 930 pci_write_config(dev, PCIR_MEMBASE_1, sc->membase >> 16, 2); 931 pci_write_config(dev, PCIR_MEMLIMIT_1, sc->memlimit >> 16, 2); 932 933 pmemhi = sc->pmembase >> 32; 934 if (pmemhi > 0) 935 pci_write_config(dev, PCIR_PMBASEH_1, pmemhi, 4); 936 pci_write_config(dev, PCIR_PMBASEL_1, sc->pmembase >> 16, 2); 937 938 pmemhi = sc->pmemlimit >> 32; 939 if (pmemhi > 0) 940 pci_write_config(dev, PCIR_PMLIMITH_1, pmemhi, 4); 941 pci_write_config(dev, PCIR_PMLIMITL_1, sc->pmemlimit >> 16, 2); 942 } 943 #endif 944 945 #ifdef PCI_HP 946 /* 947 * PCI-express HotPlug support. 948 */ 949 static int pci_enable_pcie_hp = 1; 950 SYSCTL_INT(_hw_pci, OID_AUTO, enable_pcie_hp, CTLFLAG_RDTUN, 951 &pci_enable_pcie_hp, 0, 952 "Enable support for native PCI-express HotPlug."); 953 954 TASKQUEUE_DEFINE_THREAD(pci_hp); 955 956 static void 957 pcib_probe_hotplug(struct pcib_softc *sc) 958 { 959 device_t dev; 960 uint32_t link_cap; 961 uint16_t link_sta, slot_sta; 962 963 if (!pci_enable_pcie_hp) 964 return; 965 966 dev = sc->dev; 967 if (pci_find_cap(dev, PCIY_EXPRESS, NULL) != 0) 968 return; 969 970 if (!(pcie_read_config(dev, PCIER_FLAGS, 2) & PCIEM_FLAGS_SLOT)) 971 return; 972 973 sc->pcie_slot_cap = pcie_read_config(dev, PCIER_SLOT_CAP, 4); 974 975 if ((sc->pcie_slot_cap & PCIEM_SLOT_CAP_HPC) == 0) 976 return; 977 link_cap = pcie_read_config(dev, PCIER_LINK_CAP, 4); 978 if ((link_cap & PCIEM_LINK_CAP_DL_ACTIVE) == 0) 979 return; 980 981 /* 982 * Some devices report that they have an MRL when they actually 983 * do not. Since they always report that the MRL is open, child 984 * devices would be ignored. Try to detect these devices and 985 * ignore their claim of HotPlug support. 986 * 987 * If there is an open MRL but the Data Link Layer is active, 988 * the MRL is not real. 989 */ 990 if ((sc->pcie_slot_cap & PCIEM_SLOT_CAP_MRLSP) != 0) { 991 link_sta = pcie_read_config(dev, PCIER_LINK_STA, 2); 992 slot_sta = pcie_read_config(dev, PCIER_SLOT_STA, 2); 993 if ((slot_sta & PCIEM_SLOT_STA_MRLSS) != 0 && 994 (link_sta & PCIEM_LINK_STA_DL_ACTIVE) != 0) { 995 return; 996 } 997 } 998 999 /* 1000 * Now that we're sure we want to do hot plug, ask the 1001 * firmware, if any, if that's OK. 1002 */ 1003 if (pcib_request_feature(dev, PCI_FEATURE_HP) != 0) { 1004 if (bootverbose) 1005 device_printf(dev, "Unable to activate hot plug feature.\n"); 1006 return; 1007 } 1008 1009 sc->flags |= PCIB_HOTPLUG; 1010 } 1011 1012 /* 1013 * Send a HotPlug command to the slot control register. If this slot 1014 * uses command completion interrupts and a previous command is still 1015 * in progress, then the command is dropped. Once the previous 1016 * command completes or times out, pcib_pcie_hotplug_update() will be 1017 * invoked to post a new command based on the slot's state at that 1018 * time. 1019 */ 1020 static void 1021 pcib_pcie_hotplug_command(struct pcib_softc *sc, uint16_t val, uint16_t mask) 1022 { 1023 device_t dev; 1024 uint16_t ctl, new; 1025 1026 dev = sc->dev; 1027 1028 if (sc->flags & PCIB_HOTPLUG_CMD_PENDING) 1029 return; 1030 1031 ctl = pcie_read_config(dev, PCIER_SLOT_CTL, 2); 1032 new = (ctl & ~mask) | val; 1033 if (new == ctl) 1034 return; 1035 if (bootverbose) 1036 device_printf(dev, "HotPlug command: %04x -> %04x\n", ctl, new); 1037 pcie_write_config(dev, PCIER_SLOT_CTL, new, 2); 1038 if (!(sc->pcie_slot_cap & PCIEM_SLOT_CAP_NCCS) && 1039 (ctl & new) & PCIEM_SLOT_CTL_CCIE) { 1040 sc->flags |= PCIB_HOTPLUG_CMD_PENDING; 1041 if (!cold) 1042 taskqueue_enqueue_timeout(taskqueue_pci_hp, 1043 &sc->pcie_cc_task, hz); 1044 } 1045 } 1046 1047 static void 1048 pcib_pcie_hotplug_command_completed(struct pcib_softc *sc) 1049 { 1050 device_t dev; 1051 1052 dev = sc->dev; 1053 1054 if (bootverbose) 1055 device_printf(dev, "Command Completed\n"); 1056 if (!(sc->flags & PCIB_HOTPLUG_CMD_PENDING)) 1057 return; 1058 taskqueue_cancel_timeout(taskqueue_pci_hp, &sc->pcie_cc_task, NULL); 1059 sc->flags &= ~PCIB_HOTPLUG_CMD_PENDING; 1060 wakeup(sc); 1061 } 1062 1063 /* 1064 * Returns true if a card is fully inserted from the user's 1065 * perspective. It may not yet be ready for access, but the driver 1066 * can now start enabling access if necessary. 1067 */ 1068 static bool 1069 pcib_hotplug_inserted(struct pcib_softc *sc) 1070 { 1071 1072 /* Pretend the card isn't present if a detach is forced. */ 1073 if (sc->flags & PCIB_DETACHING) 1074 return (false); 1075 1076 /* Card must be present in the slot. */ 1077 if ((sc->pcie_slot_sta & PCIEM_SLOT_STA_PDS) == 0) 1078 return (false); 1079 1080 /* A power fault implicitly turns off power to the slot. */ 1081 if (sc->pcie_slot_sta & PCIEM_SLOT_STA_PFD) 1082 return (false); 1083 1084 /* If the MRL is disengaged, the slot is powered off. */ 1085 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_MRLSP && 1086 (sc->pcie_slot_sta & PCIEM_SLOT_STA_MRLSS) != 0) 1087 return (false); 1088 1089 return (true); 1090 } 1091 1092 /* 1093 * Returns -1 if the card is fully inserted, powered, and ready for 1094 * access. Otherwise, returns 0. 1095 */ 1096 static int 1097 pcib_hotplug_present(struct pcib_softc *sc) 1098 { 1099 1100 /* Card must be inserted. */ 1101 if (!pcib_hotplug_inserted(sc)) 1102 return (0); 1103 1104 /* Require the Data Link Layer to be active. */ 1105 if (!(sc->pcie_link_sta & PCIEM_LINK_STA_DL_ACTIVE)) 1106 return (0); 1107 1108 return (-1); 1109 } 1110 1111 static int pci_enable_pcie_ei = 0; 1112 SYSCTL_INT(_hw_pci, OID_AUTO, enable_pcie_ei, CTLFLAG_RWTUN, 1113 &pci_enable_pcie_ei, 0, 1114 "Enable support for PCI-express Electromechanical Interlock."); 1115 1116 static void 1117 pcib_pcie_hotplug_update(struct pcib_softc *sc, uint16_t val, uint16_t mask, 1118 bool schedule_task) 1119 { 1120 bool card_inserted, ei_engaged; 1121 1122 /* Clear DETACHING if Presence Detect has cleared. */ 1123 if ((sc->pcie_slot_sta & (PCIEM_SLOT_STA_PDC | PCIEM_SLOT_STA_PDS)) == 1124 PCIEM_SLOT_STA_PDC) 1125 sc->flags &= ~PCIB_DETACHING; 1126 1127 card_inserted = pcib_hotplug_inserted(sc); 1128 1129 /* Turn the power indicator on if a card is inserted. */ 1130 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_PIP) { 1131 mask |= PCIEM_SLOT_CTL_PIC; 1132 if (card_inserted) 1133 val |= PCIEM_SLOT_CTL_PI_ON; 1134 else if (sc->flags & PCIB_DETACH_PENDING) 1135 val |= PCIEM_SLOT_CTL_PI_BLINK; 1136 else 1137 val |= PCIEM_SLOT_CTL_PI_OFF; 1138 } 1139 1140 /* Turn the power on via the Power Controller if a card is inserted. */ 1141 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_PCP) { 1142 mask |= PCIEM_SLOT_CTL_PCC; 1143 if (card_inserted) 1144 val |= PCIEM_SLOT_CTL_PC_ON; 1145 else 1146 val |= PCIEM_SLOT_CTL_PC_OFF; 1147 } 1148 1149 /* 1150 * If a card is inserted, enable the Electromechanical 1151 * Interlock. If a card is not inserted (or we are in the 1152 * process of detaching), disable the Electromechanical 1153 * Interlock. 1154 */ 1155 if ((sc->pcie_slot_cap & PCIEM_SLOT_CAP_EIP) && 1156 pci_enable_pcie_ei) { 1157 mask |= PCIEM_SLOT_CTL_EIC; 1158 ei_engaged = (sc->pcie_slot_sta & PCIEM_SLOT_STA_EIS) != 0; 1159 if (card_inserted != ei_engaged) 1160 val |= PCIEM_SLOT_CTL_EIC; 1161 } 1162 1163 /* 1164 * Start a timer to see if the Data Link Layer times out. 1165 * Note that we only start the timer if Presence Detect or MRL Sensor 1166 * changed on this interrupt. Stop any scheduled timer if 1167 * the Data Link Layer is active. 1168 */ 1169 if (card_inserted && 1170 !(sc->pcie_link_sta & PCIEM_LINK_STA_DL_ACTIVE) && 1171 sc->pcie_slot_sta & 1172 (PCIEM_SLOT_STA_MRLSC | PCIEM_SLOT_STA_PDC)) { 1173 if (cold) 1174 device_printf(sc->dev, 1175 "Data Link Layer inactive\n"); 1176 else 1177 taskqueue_enqueue_timeout(taskqueue_pci_hp, 1178 &sc->pcie_dll_task, hz); 1179 } else if (sc->pcie_link_sta & PCIEM_LINK_STA_DL_ACTIVE) 1180 taskqueue_cancel_timeout(taskqueue_pci_hp, &sc->pcie_dll_task, 1181 NULL); 1182 1183 pcib_pcie_hotplug_command(sc, val, mask); 1184 1185 /* 1186 * During attach the child "pci" device is added synchronously; 1187 * otherwise, the task is scheduled to manage the child 1188 * device. 1189 */ 1190 if (schedule_task && 1191 (pcib_hotplug_present(sc) != 0) != (sc->child != NULL)) 1192 taskqueue_enqueue(taskqueue_pci_hp, &sc->pcie_hp_task); 1193 } 1194 1195 static void 1196 pcib_pcie_intr_hotplug(void *arg) 1197 { 1198 struct pcib_softc *sc; 1199 device_t dev; 1200 uint16_t old_slot_sta; 1201 1202 sc = arg; 1203 dev = sc->dev; 1204 PCIB_HP_LOCK(sc); 1205 old_slot_sta = sc->pcie_slot_sta; 1206 sc->pcie_slot_sta = pcie_read_config(dev, PCIER_SLOT_STA, 2); 1207 1208 /* Clear the events just reported. */ 1209 pcie_write_config(dev, PCIER_SLOT_STA, sc->pcie_slot_sta, 2); 1210 1211 if (bootverbose) 1212 device_printf(dev, "HotPlug interrupt: %#x\n", 1213 sc->pcie_slot_sta); 1214 1215 if (sc->pcie_slot_sta & PCIEM_SLOT_STA_ABP) { 1216 if (sc->flags & PCIB_DETACH_PENDING) { 1217 device_printf(dev, 1218 "Attention Button Pressed: Detach Cancelled\n"); 1219 sc->flags &= ~PCIB_DETACH_PENDING; 1220 taskqueue_cancel_timeout(taskqueue_pci_hp, 1221 &sc->pcie_ab_task, NULL); 1222 } else if (old_slot_sta & PCIEM_SLOT_STA_PDS) { 1223 /* Only initiate detach sequence if device present. */ 1224 device_printf(dev, 1225 "Attention Button Pressed: Detaching in 5 seconds\n"); 1226 sc->flags |= PCIB_DETACH_PENDING; 1227 taskqueue_enqueue_timeout(taskqueue_pci_hp, 1228 &sc->pcie_ab_task, 5 * hz); 1229 } 1230 } 1231 if (sc->pcie_slot_sta & PCIEM_SLOT_STA_PFD) 1232 device_printf(dev, "Power Fault Detected\n"); 1233 if (sc->pcie_slot_sta & PCIEM_SLOT_STA_MRLSC) 1234 device_printf(dev, "MRL Sensor Changed to %s\n", 1235 sc->pcie_slot_sta & PCIEM_SLOT_STA_MRLSS ? "open" : 1236 "closed"); 1237 if (bootverbose && sc->pcie_slot_sta & PCIEM_SLOT_STA_PDC) 1238 device_printf(dev, "Presence Detect Changed to %s\n", 1239 sc->pcie_slot_sta & PCIEM_SLOT_STA_PDS ? "card present" : 1240 "empty"); 1241 if (sc->pcie_slot_sta & PCIEM_SLOT_STA_CC) 1242 pcib_pcie_hotplug_command_completed(sc); 1243 if (sc->pcie_slot_sta & PCIEM_SLOT_STA_DLLSC) { 1244 sc->pcie_link_sta = pcie_read_config(dev, PCIER_LINK_STA, 2); 1245 if (bootverbose) 1246 device_printf(dev, 1247 "Data Link Layer State Changed to %s\n", 1248 sc->pcie_link_sta & PCIEM_LINK_STA_DL_ACTIVE ? 1249 "active" : "inactive"); 1250 } 1251 1252 pcib_pcie_hotplug_update(sc, 0, 0, true); 1253 PCIB_HP_UNLOCK(sc); 1254 } 1255 1256 static void 1257 pcib_pcie_hotplug_task(void *context, int pending) 1258 { 1259 struct pcib_softc *sc; 1260 device_t dev; 1261 1262 sc = context; 1263 PCIB_HP_LOCK(sc); 1264 dev = sc->dev; 1265 if (pcib_hotplug_present(sc) != 0) { 1266 if (sc->child == NULL) { 1267 sc->child = device_add_child(dev, "pci", -1); 1268 bus_generic_attach(dev); 1269 } 1270 } else { 1271 if (sc->child != NULL) { 1272 if (device_delete_child(dev, sc->child) == 0) 1273 sc->child = NULL; 1274 } 1275 } 1276 PCIB_HP_UNLOCK(sc); 1277 } 1278 1279 static void 1280 pcib_pcie_ab_timeout(void *arg, int pending) 1281 { 1282 struct pcib_softc *sc = arg; 1283 1284 PCIB_HP_LOCK(sc); 1285 if (sc->flags & PCIB_DETACH_PENDING) { 1286 sc->flags |= PCIB_DETACHING; 1287 sc->flags &= ~PCIB_DETACH_PENDING; 1288 pcib_pcie_hotplug_update(sc, 0, 0, true); 1289 } 1290 PCIB_HP_UNLOCK(sc); 1291 } 1292 1293 static void 1294 pcib_pcie_cc_timeout(void *arg, int pending) 1295 { 1296 struct pcib_softc *sc = arg; 1297 device_t dev = sc->dev; 1298 uint16_t sta; 1299 1300 PCIB_HP_LOCK(sc); 1301 sta = pcie_read_config(dev, PCIER_SLOT_STA, 2); 1302 if (!(sta & PCIEM_SLOT_STA_CC)) { 1303 device_printf(dev, "HotPlug Command Timed Out\n"); 1304 sc->flags &= ~PCIB_HOTPLUG_CMD_PENDING; 1305 } else { 1306 device_printf(dev, 1307 "Missed HotPlug interrupt waiting for Command Completion\n"); 1308 pcib_pcie_intr_hotplug(sc); 1309 } 1310 PCIB_HP_UNLOCK(sc); 1311 } 1312 1313 static void 1314 pcib_pcie_dll_timeout(void *arg, int pending) 1315 { 1316 struct pcib_softc *sc = arg; 1317 device_t dev = sc->dev; 1318 uint16_t sta; 1319 1320 PCIB_HP_LOCK(sc); 1321 sta = pcie_read_config(dev, PCIER_LINK_STA, 2); 1322 if (!(sta & PCIEM_LINK_STA_DL_ACTIVE)) { 1323 device_printf(dev, 1324 "Timed out waiting for Data Link Layer Active\n"); 1325 sc->flags |= PCIB_DETACHING; 1326 pcib_pcie_hotplug_update(sc, 0, 0, true); 1327 } else if (sta != sc->pcie_link_sta) { 1328 device_printf(dev, 1329 "Missed HotPlug interrupt waiting for DLL Active\n"); 1330 pcib_pcie_intr_hotplug(sc); 1331 } 1332 PCIB_HP_UNLOCK(sc); 1333 } 1334 1335 static int 1336 pcib_alloc_pcie_irq(struct pcib_softc *sc) 1337 { 1338 device_t dev; 1339 int count, error, mem_rid, rid; 1340 1341 rid = -1; 1342 dev = sc->dev; 1343 1344 /* 1345 * For simplicity, only use MSI-X if there is a single message. 1346 * To support a device with multiple messages we would have to 1347 * use remap intr if the MSI number is not 0. 1348 */ 1349 count = pci_msix_count(dev); 1350 if (count == 1) { 1351 mem_rid = pci_msix_table_bar(dev); 1352 sc->pcie_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 1353 &mem_rid, RF_ACTIVE); 1354 if (sc->pcie_mem == NULL) { 1355 device_printf(dev, 1356 "Failed to allocate BAR for MSI-X table\n"); 1357 } else { 1358 error = pci_alloc_msix(dev, &count); 1359 if (error == 0) 1360 rid = 1; 1361 } 1362 } 1363 1364 if (rid < 0 && pci_msi_count(dev) > 0) { 1365 count = 1; 1366 error = pci_alloc_msi(dev, &count); 1367 if (error == 0) 1368 rid = 1; 1369 } 1370 1371 if (rid < 0) 1372 rid = 0; 1373 1374 sc->pcie_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1375 RF_ACTIVE | RF_SHAREABLE); 1376 if (sc->pcie_irq == NULL) { 1377 device_printf(dev, 1378 "Failed to allocate interrupt for PCI-e events\n"); 1379 if (rid > 0) 1380 pci_release_msi(dev); 1381 return (ENXIO); 1382 } 1383 1384 error = bus_setup_intr(dev, sc->pcie_irq, INTR_TYPE_MISC|INTR_MPSAFE, 1385 NULL, pcib_pcie_intr_hotplug, sc, &sc->pcie_ihand); 1386 if (error) { 1387 device_printf(dev, "Failed to setup PCI-e interrupt handler\n"); 1388 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->pcie_irq); 1389 if (rid > 0) 1390 pci_release_msi(dev); 1391 return (error); 1392 } 1393 return (0); 1394 } 1395 1396 static int 1397 pcib_release_pcie_irq(struct pcib_softc *sc) 1398 { 1399 device_t dev; 1400 int error; 1401 1402 dev = sc->dev; 1403 error = bus_teardown_intr(dev, sc->pcie_irq, sc->pcie_ihand); 1404 if (error) 1405 return (error); 1406 error = bus_free_resource(dev, SYS_RES_IRQ, sc->pcie_irq); 1407 if (error) 1408 return (error); 1409 error = pci_release_msi(dev); 1410 if (error) 1411 return (error); 1412 if (sc->pcie_mem != NULL) 1413 error = bus_free_resource(dev, SYS_RES_MEMORY, sc->pcie_mem); 1414 return (error); 1415 } 1416 1417 static void 1418 pcib_setup_hotplug(struct pcib_softc *sc) 1419 { 1420 device_t dev; 1421 uint16_t mask, val; 1422 1423 dev = sc->dev; 1424 TASK_INIT(&sc->pcie_hp_task, 0, pcib_pcie_hotplug_task, sc); 1425 TIMEOUT_TASK_INIT(taskqueue_pci_hp, &sc->pcie_ab_task, 0, 1426 pcib_pcie_ab_timeout, sc); 1427 TIMEOUT_TASK_INIT(taskqueue_pci_hp, &sc->pcie_cc_task, 0, 1428 pcib_pcie_cc_timeout, sc); 1429 TIMEOUT_TASK_INIT(taskqueue_pci_hp, &sc->pcie_dll_task, 0, 1430 pcib_pcie_dll_timeout, sc); 1431 sc->pcie_hp_lock = bus_topo_mtx(); 1432 1433 /* Allocate IRQ. */ 1434 if (pcib_alloc_pcie_irq(sc) != 0) 1435 return; 1436 1437 sc->pcie_link_sta = pcie_read_config(dev, PCIER_LINK_STA, 2); 1438 sc->pcie_slot_sta = pcie_read_config(dev, PCIER_SLOT_STA, 2); 1439 1440 /* Clear any events previously pending. */ 1441 pcie_write_config(dev, PCIER_SLOT_STA, sc->pcie_slot_sta, 2); 1442 1443 /* Enable HotPlug events. */ 1444 mask = PCIEM_SLOT_CTL_DLLSCE | PCIEM_SLOT_CTL_HPIE | 1445 PCIEM_SLOT_CTL_CCIE | PCIEM_SLOT_CTL_PDCE | PCIEM_SLOT_CTL_MRLSCE | 1446 PCIEM_SLOT_CTL_PFDE | PCIEM_SLOT_CTL_ABPE; 1447 val = PCIEM_SLOT_CTL_DLLSCE | PCIEM_SLOT_CTL_HPIE | PCIEM_SLOT_CTL_PDCE; 1448 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_APB) 1449 val |= PCIEM_SLOT_CTL_ABPE; 1450 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_PCP) 1451 val |= PCIEM_SLOT_CTL_PFDE; 1452 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_MRLSP) 1453 val |= PCIEM_SLOT_CTL_MRLSCE; 1454 if (!(sc->pcie_slot_cap & PCIEM_SLOT_CAP_NCCS)) 1455 val |= PCIEM_SLOT_CTL_CCIE; 1456 1457 /* Turn the attention indicator off. */ 1458 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_AIP) { 1459 mask |= PCIEM_SLOT_CTL_AIC; 1460 val |= PCIEM_SLOT_CTL_AI_OFF; 1461 } 1462 1463 pcib_pcie_hotplug_update(sc, val, mask, false); 1464 } 1465 1466 static int 1467 pcib_detach_hotplug(struct pcib_softc *sc) 1468 { 1469 uint16_t mask, val; 1470 int error; 1471 1472 /* Disable the card in the slot and force it to detach. */ 1473 if (sc->flags & PCIB_DETACH_PENDING) { 1474 sc->flags &= ~PCIB_DETACH_PENDING; 1475 taskqueue_cancel_timeout(taskqueue_pci_hp, &sc->pcie_ab_task, 1476 NULL); 1477 } 1478 sc->flags |= PCIB_DETACHING; 1479 1480 if (sc->flags & PCIB_HOTPLUG_CMD_PENDING) { 1481 taskqueue_cancel_timeout(taskqueue_pci_hp, &sc->pcie_cc_task, 1482 NULL); 1483 tsleep(sc, 0, "hpcmd", hz); 1484 sc->flags &= ~PCIB_HOTPLUG_CMD_PENDING; 1485 } 1486 1487 /* Disable HotPlug events. */ 1488 mask = PCIEM_SLOT_CTL_DLLSCE | PCIEM_SLOT_CTL_HPIE | 1489 PCIEM_SLOT_CTL_CCIE | PCIEM_SLOT_CTL_PDCE | PCIEM_SLOT_CTL_MRLSCE | 1490 PCIEM_SLOT_CTL_PFDE | PCIEM_SLOT_CTL_ABPE; 1491 val = 0; 1492 1493 /* Turn the attention indicator off. */ 1494 if (sc->pcie_slot_cap & PCIEM_SLOT_CAP_AIP) { 1495 mask |= PCIEM_SLOT_CTL_AIC; 1496 val |= PCIEM_SLOT_CTL_AI_OFF; 1497 } 1498 1499 pcib_pcie_hotplug_update(sc, val, mask, false); 1500 1501 error = pcib_release_pcie_irq(sc); 1502 if (error) 1503 return (error); 1504 taskqueue_drain(taskqueue_pci_hp, &sc->pcie_hp_task); 1505 taskqueue_drain_timeout(taskqueue_pci_hp, &sc->pcie_ab_task); 1506 taskqueue_drain_timeout(taskqueue_pci_hp, &sc->pcie_cc_task); 1507 taskqueue_drain_timeout(taskqueue_pci_hp, &sc->pcie_dll_task); 1508 return (0); 1509 } 1510 #endif 1511 1512 /* 1513 * Get current bridge configuration. 1514 */ 1515 static void 1516 pcib_cfg_save(struct pcib_softc *sc) 1517 { 1518 #ifndef NEW_PCIB 1519 device_t dev; 1520 uint16_t command; 1521 1522 dev = sc->dev; 1523 1524 command = pci_read_config(dev, PCIR_COMMAND, 2); 1525 if (command & PCIM_CMD_PORTEN) 1526 pcib_get_io_decode(sc); 1527 if (command & PCIM_CMD_MEMEN) 1528 pcib_get_mem_decode(sc); 1529 #endif 1530 } 1531 1532 /* 1533 * Restore previous bridge configuration. 1534 */ 1535 static void 1536 pcib_cfg_restore(struct pcib_softc *sc) 1537 { 1538 #ifndef NEW_PCIB 1539 uint16_t command; 1540 #endif 1541 1542 #ifdef NEW_PCIB 1543 pcib_write_windows(sc, WIN_IO | WIN_MEM | WIN_PMEM); 1544 #else 1545 command = pci_read_config(sc->dev, PCIR_COMMAND, 2); 1546 if (command & PCIM_CMD_PORTEN) 1547 pcib_set_io_decode(sc); 1548 if (command & PCIM_CMD_MEMEN) 1549 pcib_set_mem_decode(sc); 1550 #endif 1551 } 1552 1553 /* 1554 * Generic device interface 1555 */ 1556 static int 1557 pcib_probe(device_t dev) 1558 { 1559 if ((pci_get_class(dev) == PCIC_BRIDGE) && 1560 (pci_get_subclass(dev) == PCIS_BRIDGE_PCI)) { 1561 device_set_desc(dev, "PCI-PCI bridge"); 1562 return(-10000); 1563 } 1564 return(ENXIO); 1565 } 1566 1567 void 1568 pcib_attach_common(device_t dev) 1569 { 1570 struct pcib_softc *sc; 1571 struct sysctl_ctx_list *sctx; 1572 struct sysctl_oid *soid; 1573 int comma; 1574 1575 sc = device_get_softc(dev); 1576 sc->dev = dev; 1577 1578 /* 1579 * Get current bridge configuration. 1580 */ 1581 sc->domain = pci_get_domain(dev); 1582 #if !(defined(NEW_PCIB) && defined(PCI_RES_BUS)) 1583 sc->bus.sec = pci_read_config(dev, PCIR_SECBUS_1, 1); 1584 sc->bus.sub = pci_read_config(dev, PCIR_SUBBUS_1, 1); 1585 #endif 1586 sc->bridgectl = pci_read_config(dev, PCIR_BRIDGECTL_1, 2); 1587 pcib_cfg_save(sc); 1588 1589 /* 1590 * The primary bus register should always be the bus of the 1591 * parent. 1592 */ 1593 sc->pribus = pci_get_bus(dev); 1594 pci_write_config(dev, PCIR_PRIBUS_1, sc->pribus, 1); 1595 1596 /* 1597 * Setup sysctl reporting nodes 1598 */ 1599 sctx = device_get_sysctl_ctx(dev); 1600 soid = device_get_sysctl_tree(dev); 1601 SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "domain", 1602 CTLFLAG_RD, &sc->domain, 0, "Domain number"); 1603 SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "pribus", 1604 CTLFLAG_RD, &sc->pribus, 0, "Primary bus number"); 1605 SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "secbus", 1606 CTLFLAG_RD, &sc->bus.sec, 0, "Secondary bus number"); 1607 SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "subbus", 1608 CTLFLAG_RD, &sc->bus.sub, 0, "Subordinate bus number"); 1609 1610 /* 1611 * Quirk handling. 1612 */ 1613 switch (pci_get_devid(dev)) { 1614 #if !(defined(NEW_PCIB) && defined(PCI_RES_BUS)) 1615 case 0x12258086: /* Intel 82454KX/GX (Orion) */ 1616 { 1617 uint8_t supbus; 1618 1619 supbus = pci_read_config(dev, 0x41, 1); 1620 if (supbus != 0xff) { 1621 sc->bus.sec = supbus + 1; 1622 sc->bus.sub = supbus + 1; 1623 } 1624 break; 1625 } 1626 #endif 1627 1628 /* 1629 * The i82380FB mobile docking controller is a PCI-PCI bridge, 1630 * and it is a subtractive bridge. However, the ProgIf is wrong 1631 * so the normal setting of PCIB_SUBTRACTIVE bit doesn't 1632 * happen. There are also Toshiba and Cavium ThunderX bridges 1633 * that behave this way. 1634 */ 1635 case 0xa002177d: /* Cavium ThunderX */ 1636 case 0x124b8086: /* Intel 82380FB Mobile */ 1637 case 0x060513d7: /* Toshiba ???? */ 1638 sc->flags |= PCIB_SUBTRACTIVE; 1639 break; 1640 1641 #if !(defined(NEW_PCIB) && defined(PCI_RES_BUS)) 1642 /* Compaq R3000 BIOS sets wrong subordinate bus number. */ 1643 case 0x00dd10de: 1644 { 1645 char *cp; 1646 1647 if ((cp = kern_getenv("smbios.planar.maker")) == NULL) 1648 break; 1649 if (strncmp(cp, "Compal", 6) != 0) { 1650 freeenv(cp); 1651 break; 1652 } 1653 freeenv(cp); 1654 if ((cp = kern_getenv("smbios.planar.product")) == NULL) 1655 break; 1656 if (strncmp(cp, "08A0", 4) != 0) { 1657 freeenv(cp); 1658 break; 1659 } 1660 freeenv(cp); 1661 if (sc->bus.sub < 0xa) { 1662 pci_write_config(dev, PCIR_SUBBUS_1, 0xa, 1); 1663 sc->bus.sub = pci_read_config(dev, PCIR_SUBBUS_1, 1); 1664 } 1665 break; 1666 } 1667 #endif 1668 } 1669 1670 if (pci_msi_device_blacklisted(dev)) 1671 sc->flags |= PCIB_DISABLE_MSI; 1672 1673 if (pci_msix_device_blacklisted(dev)) 1674 sc->flags |= PCIB_DISABLE_MSIX; 1675 1676 /* 1677 * Intel 815, 845 and other chipsets say they are PCI-PCI bridges, 1678 * but have a ProgIF of 0x80. The 82801 family (AA, AB, BAM/CAM, 1679 * BA/CA/DB and E) PCI bridges are HUB-PCI bridges, in Intelese. 1680 * This means they act as if they were subtractively decoding 1681 * bridges and pass all transactions. Mark them and real ProgIf 1 1682 * parts as subtractive. 1683 */ 1684 if ((pci_get_devid(dev) & 0xff00ffff) == 0x24008086 || 1685 pci_read_config(dev, PCIR_PROGIF, 1) == PCIP_BRIDGE_PCI_SUBTRACTIVE) 1686 sc->flags |= PCIB_SUBTRACTIVE; 1687 1688 #ifdef PCI_HP 1689 pcib_probe_hotplug(sc); 1690 #endif 1691 #ifdef NEW_PCIB 1692 #ifdef PCI_RES_BUS 1693 pcib_setup_secbus(dev, &sc->bus, 1); 1694 #endif 1695 pcib_probe_windows(sc); 1696 #endif 1697 #ifdef PCI_HP 1698 if (sc->flags & PCIB_HOTPLUG) 1699 pcib_setup_hotplug(sc); 1700 #endif 1701 if (bootverbose) { 1702 device_printf(dev, " domain %d\n", sc->domain); 1703 device_printf(dev, " secondary bus %d\n", sc->bus.sec); 1704 device_printf(dev, " subordinate bus %d\n", sc->bus.sub); 1705 #ifdef NEW_PCIB 1706 if (pcib_is_window_open(&sc->io)) 1707 device_printf(dev, " I/O decode 0x%jx-0x%jx\n", 1708 (uintmax_t)sc->io.base, (uintmax_t)sc->io.limit); 1709 if (pcib_is_window_open(&sc->mem)) 1710 device_printf(dev, " memory decode 0x%jx-0x%jx\n", 1711 (uintmax_t)sc->mem.base, (uintmax_t)sc->mem.limit); 1712 if (pcib_is_window_open(&sc->pmem)) 1713 device_printf(dev, " prefetched decode 0x%jx-0x%jx\n", 1714 (uintmax_t)sc->pmem.base, (uintmax_t)sc->pmem.limit); 1715 #else 1716 if (pcib_is_io_open(sc)) 1717 device_printf(dev, " I/O decode 0x%x-0x%x\n", 1718 sc->iobase, sc->iolimit); 1719 if (pcib_is_nonprefetch_open(sc)) 1720 device_printf(dev, " memory decode 0x%jx-0x%jx\n", 1721 (uintmax_t)sc->membase, (uintmax_t)sc->memlimit); 1722 if (pcib_is_prefetch_open(sc)) 1723 device_printf(dev, " prefetched decode 0x%jx-0x%jx\n", 1724 (uintmax_t)sc->pmembase, (uintmax_t)sc->pmemlimit); 1725 #endif 1726 if (sc->bridgectl & (PCIB_BCR_ISA_ENABLE | PCIB_BCR_VGA_ENABLE) || 1727 sc->flags & PCIB_SUBTRACTIVE) { 1728 device_printf(dev, " special decode "); 1729 comma = 0; 1730 if (sc->bridgectl & PCIB_BCR_ISA_ENABLE) { 1731 printf("ISA"); 1732 comma = 1; 1733 } 1734 if (sc->bridgectl & PCIB_BCR_VGA_ENABLE) { 1735 printf("%sVGA", comma ? ", " : ""); 1736 comma = 1; 1737 } 1738 if (sc->flags & PCIB_SUBTRACTIVE) 1739 printf("%ssubtractive", comma ? ", " : ""); 1740 printf("\n"); 1741 } 1742 } 1743 1744 /* 1745 * Always enable busmastering on bridges so that transactions 1746 * initiated on the secondary bus are passed through to the 1747 * primary bus. 1748 */ 1749 pci_enable_busmaster(dev); 1750 } 1751 1752 #ifdef PCI_HP 1753 static int 1754 pcib_present(struct pcib_softc *sc) 1755 { 1756 1757 if (sc->flags & PCIB_HOTPLUG) 1758 return (pcib_hotplug_present(sc) != 0); 1759 return (1); 1760 } 1761 #endif 1762 1763 int 1764 pcib_attach_child(device_t dev) 1765 { 1766 struct pcib_softc *sc; 1767 1768 sc = device_get_softc(dev); 1769 if (sc->bus.sec == 0) { 1770 /* no secondary bus; we should have fixed this */ 1771 return(0); 1772 } 1773 1774 #ifdef PCI_HP 1775 if (!pcib_present(sc)) { 1776 /* An empty HotPlug slot, so don't add a PCI bus yet. */ 1777 return (0); 1778 } 1779 #endif 1780 1781 sc->child = device_add_child(dev, "pci", -1); 1782 return (bus_generic_attach(dev)); 1783 } 1784 1785 int 1786 pcib_attach(device_t dev) 1787 { 1788 1789 pcib_attach_common(dev); 1790 return (pcib_attach_child(dev)); 1791 } 1792 1793 int 1794 pcib_detach(device_t dev) 1795 { 1796 #if defined(PCI_HP) || defined(NEW_PCIB) 1797 struct pcib_softc *sc; 1798 #endif 1799 int error; 1800 1801 #if defined(PCI_HP) || defined(NEW_PCIB) 1802 sc = device_get_softc(dev); 1803 #endif 1804 error = bus_generic_detach(dev); 1805 if (error) 1806 return (error); 1807 #ifdef PCI_HP 1808 if (sc->flags & PCIB_HOTPLUG) { 1809 error = pcib_detach_hotplug(sc); 1810 if (error) 1811 return (error); 1812 } 1813 #endif 1814 error = device_delete_children(dev); 1815 if (error) 1816 return (error); 1817 #ifdef NEW_PCIB 1818 pcib_free_windows(sc); 1819 #ifdef PCI_RES_BUS 1820 pcib_free_secbus(dev, &sc->bus); 1821 #endif 1822 #endif 1823 return (0); 1824 } 1825 1826 int 1827 pcib_suspend(device_t dev) 1828 { 1829 1830 pcib_cfg_save(device_get_softc(dev)); 1831 return (bus_generic_suspend(dev)); 1832 } 1833 1834 int 1835 pcib_resume(device_t dev) 1836 { 1837 1838 pcib_cfg_restore(device_get_softc(dev)); 1839 1840 /* 1841 * Restore the Command register only after restoring the windows. 1842 * The bridge should not be claiming random windows. 1843 */ 1844 pci_write_config(dev, PCIR_COMMAND, pci_get_cmdreg(dev), 2); 1845 return (bus_generic_resume(dev)); 1846 } 1847 1848 void 1849 pcib_bridge_init(device_t dev) 1850 { 1851 pci_write_config(dev, PCIR_IOBASEL_1, 0xff, 1); 1852 pci_write_config(dev, PCIR_IOBASEH_1, 0xffff, 2); 1853 pci_write_config(dev, PCIR_IOLIMITL_1, 0, 1); 1854 pci_write_config(dev, PCIR_IOLIMITH_1, 0, 2); 1855 pci_write_config(dev, PCIR_MEMBASE_1, 0xffff, 2); 1856 pci_write_config(dev, PCIR_MEMLIMIT_1, 0, 2); 1857 pci_write_config(dev, PCIR_PMBASEL_1, 0xffff, 2); 1858 pci_write_config(dev, PCIR_PMBASEH_1, 0xffffffff, 4); 1859 pci_write_config(dev, PCIR_PMLIMITL_1, 0, 2); 1860 pci_write_config(dev, PCIR_PMLIMITH_1, 0, 4); 1861 } 1862 1863 int 1864 pcib_child_present(device_t dev, device_t child) 1865 { 1866 #ifdef PCI_HP 1867 struct pcib_softc *sc = device_get_softc(dev); 1868 int retval; 1869 1870 retval = bus_child_present(dev); 1871 if (retval != 0 && sc->flags & PCIB_HOTPLUG) 1872 retval = pcib_hotplug_present(sc); 1873 return (retval); 1874 #else 1875 return (bus_child_present(dev)); 1876 #endif 1877 } 1878 1879 int 1880 pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) 1881 { 1882 struct pcib_softc *sc = device_get_softc(dev); 1883 1884 switch (which) { 1885 case PCIB_IVAR_DOMAIN: 1886 *result = sc->domain; 1887 return(0); 1888 case PCIB_IVAR_BUS: 1889 *result = sc->bus.sec; 1890 return(0); 1891 } 1892 return(ENOENT); 1893 } 1894 1895 int 1896 pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value) 1897 { 1898 1899 switch (which) { 1900 case PCIB_IVAR_DOMAIN: 1901 return(EINVAL); 1902 case PCIB_IVAR_BUS: 1903 return(EINVAL); 1904 } 1905 return(ENOENT); 1906 } 1907 1908 #ifdef NEW_PCIB 1909 /* 1910 * Attempt to allocate a resource from the existing resources assigned 1911 * to a window. 1912 */ 1913 static struct resource * 1914 pcib_suballoc_resource(struct pcib_softc *sc, struct pcib_window *w, 1915 device_t child, int type, int *rid, rman_res_t start, rman_res_t end, 1916 rman_res_t count, u_int flags) 1917 { 1918 struct resource *res; 1919 1920 if (!pcib_is_window_open(w)) 1921 return (NULL); 1922 1923 res = rman_reserve_resource(&w->rman, start, end, count, 1924 flags & ~RF_ACTIVE, child); 1925 if (res == NULL) 1926 return (NULL); 1927 1928 if (bootverbose) 1929 device_printf(sc->dev, 1930 "allocated %s range (%#jx-%#jx) for rid %x of %s\n", 1931 w->name, rman_get_start(res), rman_get_end(res), *rid, 1932 pcib_child_name(child)); 1933 rman_set_rid(res, *rid); 1934 rman_set_type(res, type); 1935 1936 if (flags & RF_ACTIVE) { 1937 if (bus_activate_resource(child, type, *rid, res) != 0) { 1938 rman_release_resource(res); 1939 return (NULL); 1940 } 1941 } 1942 1943 return (res); 1944 } 1945 1946 /* Allocate a fresh resource range for an unconfigured window. */ 1947 static int 1948 pcib_alloc_new_window(struct pcib_softc *sc, struct pcib_window *w, int type, 1949 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1950 { 1951 struct resource *res; 1952 rman_res_t base, limit, wmask; 1953 int rid; 1954 1955 /* 1956 * If this is an I/O window on a bridge with ISA enable set 1957 * and the start address is below 64k, then try to allocate an 1958 * initial window of 0x1000 bytes long starting at address 1959 * 0xf000 and walking down. Note that if the original request 1960 * was larger than the non-aliased range size of 0x100 our 1961 * caller would have raised the start address up to 64k 1962 * already. 1963 */ 1964 if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE && 1965 start < 65536) { 1966 for (base = 0xf000; (long)base >= 0; base -= 0x1000) { 1967 limit = base + 0xfff; 1968 1969 /* 1970 * Skip ranges that wouldn't work for the 1971 * original request. Note that the actual 1972 * window that overlaps are the non-alias 1973 * ranges within [base, limit], so this isn't 1974 * quite a simple comparison. 1975 */ 1976 if (start + count > limit - 0x400) 1977 continue; 1978 if (base == 0) { 1979 /* 1980 * The first open region for the window at 1981 * 0 is 0x400-0x4ff. 1982 */ 1983 if (end - count + 1 < 0x400) 1984 continue; 1985 } else { 1986 if (end - count + 1 < base) 1987 continue; 1988 } 1989 1990 if (pcib_alloc_nonisa_ranges(sc, base, limit) == 0) { 1991 w->base = base; 1992 w->limit = limit; 1993 return (0); 1994 } 1995 } 1996 return (ENOSPC); 1997 } 1998 1999 wmask = ((rman_res_t)1 << w->step) - 1; 2000 if (RF_ALIGNMENT(flags) < w->step) { 2001 flags &= ~RF_ALIGNMENT_MASK; 2002 flags |= RF_ALIGNMENT_LOG2(w->step); 2003 } 2004 start &= ~wmask; 2005 end |= wmask; 2006 count = roundup2(count, (rman_res_t)1 << w->step); 2007 rid = w->reg; 2008 res = bus_alloc_resource(sc->dev, type, &rid, start, end, count, 2009 flags | RF_ACTIVE | RF_UNMAPPED); 2010 if (res == NULL) 2011 return (ENOSPC); 2012 pcib_add_window_resources(w, &res, 1); 2013 pcib_activate_window(sc, type); 2014 w->base = rman_get_start(res); 2015 w->limit = rman_get_end(res); 2016 return (0); 2017 } 2018 2019 /* Try to expand an existing window to the requested base and limit. */ 2020 static int 2021 pcib_expand_window(struct pcib_softc *sc, struct pcib_window *w, int type, 2022 rman_res_t base, rman_res_t limit) 2023 { 2024 struct resource *res; 2025 int error, i, force_64k_base; 2026 2027 KASSERT(base <= w->base && limit >= w->limit, 2028 ("attempting to shrink window")); 2029 2030 /* 2031 * XXX: pcib_grow_window() doesn't try to do this anyway and 2032 * the error handling for all the edge cases would be tedious. 2033 */ 2034 KASSERT(limit == w->limit || base == w->base, 2035 ("attempting to grow both ends of a window")); 2036 2037 /* 2038 * Yet more special handling for requests to expand an I/O 2039 * window behind an ISA-enabled bridge. Since I/O windows 2040 * have to grow in 0x1000 increments and the end of the 0xffff 2041 * range is an alias, growing a window below 64k will always 2042 * result in allocating new resources and never adjusting an 2043 * existing resource. 2044 */ 2045 if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE && 2046 (limit <= 65535 || (base <= 65535 && base != w->base))) { 2047 KASSERT(limit == w->limit || limit <= 65535, 2048 ("attempting to grow both ends across 64k ISA alias")); 2049 2050 if (base != w->base) 2051 error = pcib_alloc_nonisa_ranges(sc, base, w->base - 1); 2052 else 2053 error = pcib_alloc_nonisa_ranges(sc, w->limit + 1, 2054 limit); 2055 if (error == 0) { 2056 w->base = base; 2057 w->limit = limit; 2058 } 2059 return (error); 2060 } 2061 2062 /* 2063 * Find the existing resource to adjust. Usually there is only one, 2064 * but for an ISA-enabled bridge we might be growing the I/O window 2065 * above 64k and need to find the existing resource that maps all 2066 * of the area above 64k. 2067 */ 2068 for (i = 0; i < w->count; i++) { 2069 if (rman_get_end(w->res[i]) == w->limit) 2070 break; 2071 } 2072 KASSERT(i != w->count, ("did not find existing resource")); 2073 res = w->res[i]; 2074 2075 /* 2076 * Usually the resource we found should match the window's 2077 * existing range. The one exception is the ISA-enabled case 2078 * mentioned above in which case the resource should start at 2079 * 64k. 2080 */ 2081 if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE && 2082 w->base <= 65535) { 2083 KASSERT(rman_get_start(res) == 65536, 2084 ("existing resource mismatch")); 2085 force_64k_base = 1; 2086 } else { 2087 KASSERT(w->base == rman_get_start(res), 2088 ("existing resource mismatch")); 2089 force_64k_base = 0; 2090 } 2091 2092 error = bus_adjust_resource(sc->dev, type, res, force_64k_base ? 2093 rman_get_start(res) : base, limit); 2094 if (error) 2095 return (error); 2096 2097 /* Add the newly allocated region to the resource manager. */ 2098 if (w->base != base) { 2099 error = rman_manage_region(&w->rman, base, w->base - 1); 2100 w->base = base; 2101 } else { 2102 error = rman_manage_region(&w->rman, w->limit + 1, limit); 2103 w->limit = limit; 2104 } 2105 if (error) { 2106 if (bootverbose) 2107 device_printf(sc->dev, 2108 "failed to expand %s resource manager\n", w->name); 2109 (void)bus_adjust_resource(sc->dev, type, res, force_64k_base ? 2110 rman_get_start(res) : w->base, w->limit); 2111 } 2112 return (error); 2113 } 2114 2115 /* 2116 * Attempt to grow a window to make room for a given resource request. 2117 */ 2118 static int 2119 pcib_grow_window(struct pcib_softc *sc, struct pcib_window *w, int type, 2120 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 2121 { 2122 rman_res_t align, start_free, end_free, front, back, wmask; 2123 int error; 2124 2125 /* 2126 * Clamp the desired resource range to the maximum address 2127 * this window supports. Reject impossible requests. 2128 * 2129 * For I/O port requests behind a bridge with the ISA enable 2130 * bit set, force large allocations to start above 64k. 2131 */ 2132 if (!w->valid) 2133 return (EINVAL); 2134 if (sc->bridgectl & PCIB_BCR_ISA_ENABLE && count > 0x100 && 2135 start < 65536) 2136 start = 65536; 2137 if (end > w->rman.rm_end) 2138 end = w->rman.rm_end; 2139 if (start + count - 1 > end || start + count < start) 2140 return (EINVAL); 2141 wmask = ((rman_res_t)1 << w->step) - 1; 2142 2143 /* 2144 * If there is no resource at all, just try to allocate enough 2145 * aligned space for this resource. 2146 */ 2147 if (w->res == NULL) { 2148 error = pcib_alloc_new_window(sc, w, type, start, end, count, 2149 flags); 2150 if (error) { 2151 if (bootverbose) 2152 device_printf(sc->dev, 2153 "failed to allocate initial %s window (%#jx-%#jx,%#jx)\n", 2154 w->name, start, end, count); 2155 return (error); 2156 } 2157 if (bootverbose) 2158 device_printf(sc->dev, 2159 "allocated initial %s window of %#jx-%#jx\n", 2160 w->name, (uintmax_t)w->base, (uintmax_t)w->limit); 2161 goto updatewin; 2162 } 2163 2164 /* 2165 * See if growing the window would help. Compute the minimum 2166 * amount of address space needed on both the front and back 2167 * ends of the existing window to satisfy the allocation. 2168 * 2169 * For each end, build a candidate region adjusting for the 2170 * required alignment, etc. If there is a free region at the 2171 * edge of the window, grow from the inner edge of the free 2172 * region. Otherwise grow from the window boundary. 2173 * 2174 * Growing an I/O window below 64k for a bridge with the ISA 2175 * enable bit doesn't require any special magic as the step 2176 * size of an I/O window (1k) always includes multiple 2177 * non-alias ranges when it is grown in either direction. 2178 * 2179 * XXX: Special case: if w->res is completely empty and the 2180 * request size is larger than w->res, we should find the 2181 * optimal aligned buffer containing w->res and allocate that. 2182 */ 2183 if (bootverbose) 2184 device_printf(sc->dev, 2185 "attempting to grow %s window for (%#jx-%#jx,%#jx)\n", 2186 w->name, start, end, count); 2187 align = (rman_res_t)1 << RF_ALIGNMENT(flags); 2188 if (start < w->base) { 2189 if (rman_first_free_region(&w->rman, &start_free, &end_free) != 2190 0 || start_free != w->base) 2191 end_free = w->base; 2192 if (end_free > end) 2193 end_free = end + 1; 2194 2195 /* Move end_free down until it is properly aligned. */ 2196 end_free &= ~(align - 1); 2197 end_free--; 2198 front = end_free - (count - 1); 2199 2200 /* 2201 * The resource would now be allocated at (front, 2202 * end_free). Ensure that fits in the (start, end) 2203 * bounds. end_free is checked above. If 'front' is 2204 * ok, ensure it is properly aligned for this window. 2205 * Also check for underflow. 2206 */ 2207 if (front >= start && front <= end_free) { 2208 if (bootverbose) 2209 printf("\tfront candidate range: %#jx-%#jx\n", 2210 front, end_free); 2211 front &= ~wmask; 2212 front = w->base - front; 2213 } else 2214 front = 0; 2215 } else 2216 front = 0; 2217 if (end > w->limit) { 2218 if (rman_last_free_region(&w->rman, &start_free, &end_free) != 2219 0 || end_free != w->limit) 2220 start_free = w->limit + 1; 2221 if (start_free < start) 2222 start_free = start; 2223 2224 /* Move start_free up until it is properly aligned. */ 2225 start_free = roundup2(start_free, align); 2226 back = start_free + count - 1; 2227 2228 /* 2229 * The resource would now be allocated at (start_free, 2230 * back). Ensure that fits in the (start, end) 2231 * bounds. start_free is checked above. If 'back' is 2232 * ok, ensure it is properly aligned for this window. 2233 * Also check for overflow. 2234 */ 2235 if (back <= end && start_free <= back) { 2236 if (bootverbose) 2237 printf("\tback candidate range: %#jx-%#jx\n", 2238 start_free, back); 2239 back |= wmask; 2240 back -= w->limit; 2241 } else 2242 back = 0; 2243 } else 2244 back = 0; 2245 2246 /* 2247 * Try to allocate the smallest needed region first. 2248 * If that fails, fall back to the other region. 2249 */ 2250 error = ENOSPC; 2251 while (front != 0 || back != 0) { 2252 if (front != 0 && (front <= back || back == 0)) { 2253 error = pcib_expand_window(sc, w, type, w->base - front, 2254 w->limit); 2255 if (error == 0) 2256 break; 2257 front = 0; 2258 } else { 2259 error = pcib_expand_window(sc, w, type, w->base, 2260 w->limit + back); 2261 if (error == 0) 2262 break; 2263 back = 0; 2264 } 2265 } 2266 2267 if (error) 2268 return (error); 2269 if (bootverbose) 2270 device_printf(sc->dev, "grew %s window to %#jx-%#jx\n", 2271 w->name, (uintmax_t)w->base, (uintmax_t)w->limit); 2272 2273 updatewin: 2274 /* Write the new window. */ 2275 KASSERT((w->base & wmask) == 0, ("start address is not aligned")); 2276 KASSERT((w->limit & wmask) == wmask, ("end address is not aligned")); 2277 pcib_write_windows(sc, w->mask); 2278 return (0); 2279 } 2280 2281 /* 2282 * We have to trap resource allocation requests and ensure that the bridge 2283 * is set up to, or capable of handling them. 2284 */ 2285 static struct resource * 2286 pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, 2287 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 2288 { 2289 struct pcib_softc *sc; 2290 struct resource *r; 2291 2292 sc = device_get_softc(dev); 2293 2294 /* 2295 * VGA resources are decoded iff the VGA enable bit is set in 2296 * the bridge control register. VGA resources do not fall into 2297 * the resource windows and are passed up to the parent. 2298 */ 2299 if ((type == SYS_RES_IOPORT && pci_is_vga_ioport_range(start, end)) || 2300 (type == SYS_RES_MEMORY && pci_is_vga_memory_range(start, end))) { 2301 if (sc->bridgectl & PCIB_BCR_VGA_ENABLE) 2302 return (bus_generic_alloc_resource(dev, child, type, 2303 rid, start, end, count, flags)); 2304 else 2305 return (NULL); 2306 } 2307 2308 switch (type) { 2309 #ifdef PCI_RES_BUS 2310 case PCI_RES_BUS: 2311 return (pcib_alloc_subbus(&sc->bus, child, rid, start, end, 2312 count, flags)); 2313 #endif 2314 case SYS_RES_IOPORT: 2315 if (pcib_is_isa_range(sc, start, end, count)) 2316 return (NULL); 2317 r = pcib_suballoc_resource(sc, &sc->io, child, type, rid, start, 2318 end, count, flags); 2319 if (r != NULL || (sc->flags & PCIB_SUBTRACTIVE) != 0) 2320 break; 2321 if (pcib_grow_window(sc, &sc->io, type, start, end, count, 2322 flags) == 0) 2323 r = pcib_suballoc_resource(sc, &sc->io, child, type, 2324 rid, start, end, count, flags); 2325 break; 2326 case SYS_RES_MEMORY: 2327 /* 2328 * For prefetchable resources, prefer the prefetchable 2329 * memory window, but fall back to the regular memory 2330 * window if that fails. Try both windows before 2331 * attempting to grow a window in case the firmware 2332 * has used a range in the regular memory window to 2333 * map a prefetchable BAR. 2334 */ 2335 if (flags & RF_PREFETCHABLE) { 2336 r = pcib_suballoc_resource(sc, &sc->pmem, child, type, 2337 rid, start, end, count, flags); 2338 if (r != NULL) 2339 break; 2340 } 2341 r = pcib_suballoc_resource(sc, &sc->mem, child, type, rid, 2342 start, end, count, flags); 2343 if (r != NULL || (sc->flags & PCIB_SUBTRACTIVE) != 0) 2344 break; 2345 if (flags & RF_PREFETCHABLE) { 2346 if (pcib_grow_window(sc, &sc->pmem, type, start, end, 2347 count, flags) == 0) { 2348 r = pcib_suballoc_resource(sc, &sc->pmem, child, 2349 type, rid, start, end, count, flags); 2350 if (r != NULL) 2351 break; 2352 } 2353 } 2354 if (pcib_grow_window(sc, &sc->mem, type, start, end, count, 2355 flags & ~RF_PREFETCHABLE) == 0) 2356 r = pcib_suballoc_resource(sc, &sc->mem, child, type, 2357 rid, start, end, count, flags); 2358 break; 2359 default: 2360 return (bus_generic_alloc_resource(dev, child, type, rid, 2361 start, end, count, flags)); 2362 } 2363 2364 /* 2365 * If attempts to suballocate from the window fail but this is a 2366 * subtractive bridge, pass the request up the tree. 2367 */ 2368 if (sc->flags & PCIB_SUBTRACTIVE && r == NULL) 2369 return (bus_generic_alloc_resource(dev, child, type, rid, 2370 start, end, count, flags)); 2371 return (r); 2372 } 2373 2374 static int 2375 pcib_adjust_resource(device_t bus, device_t child, struct resource *r, 2376 rman_res_t start, rman_res_t end) 2377 { 2378 struct pcib_softc *sc; 2379 struct pcib_window *w; 2380 rman_res_t wmask; 2381 int error, type; 2382 2383 sc = device_get_softc(bus); 2384 type = rman_get_type(r); 2385 2386 /* 2387 * If the resource wasn't sub-allocated from one of our region 2388 * managers then just pass the request up. 2389 */ 2390 if (!pcib_is_resource_managed(sc, r)) 2391 return (bus_generic_adjust_resource(bus, child, r, start, end)); 2392 2393 #ifdef PCI_RES_BUS 2394 if (type == PCI_RES_BUS) { 2395 /* 2396 * If our bus range isn't big enough to grow the sub-allocation 2397 * then we need to grow our bus range. Any request that would 2398 * require us to decrease the start of our own bus range is 2399 * invalid, we can only extend the end; ignore such requests 2400 * and let rman_adjust_resource fail below. 2401 */ 2402 if (start >= sc->bus.sec && end > sc->bus.sub) { 2403 error = pcib_grow_subbus(&sc->bus, end); 2404 if (error != 0) 2405 return (error); 2406 } 2407 } else 2408 #endif 2409 { 2410 /* 2411 * Resource is managed and not a secondary bus number, must 2412 * be from one of our windows. 2413 */ 2414 w = pcib_get_resource_window(sc, r); 2415 KASSERT(w != NULL, 2416 ("%s: no window for resource (%#jx-%#jx) type %d", 2417 __func__, rman_get_start(r), rman_get_end(r), type)); 2418 2419 /* 2420 * If our window isn't big enough to grow the sub-allocation 2421 * then we need to expand the window. 2422 */ 2423 if (start < w->base || end > w->limit) { 2424 wmask = ((rman_res_t)1 << w->step) - 1; 2425 error = pcib_expand_window(sc, w, type, 2426 MIN(start & ~wmask, w->base), 2427 MAX(end | wmask, w->limit)); 2428 if (error != 0) 2429 return (error); 2430 if (bootverbose) 2431 device_printf(sc->dev, 2432 "grew %s window to %#jx-%#jx\n", 2433 w->name, (uintmax_t)w->base, 2434 (uintmax_t)w->limit); 2435 pcib_write_windows(sc, w->mask); 2436 } 2437 } 2438 2439 return (rman_adjust_resource(r, start, end)); 2440 } 2441 2442 static int 2443 pcib_release_resource(device_t dev, device_t child, struct resource *r) 2444 { 2445 struct pcib_softc *sc; 2446 int error; 2447 2448 sc = device_get_softc(dev); 2449 if (pcib_is_resource_managed(sc, r)) { 2450 if (rman_get_flags(r) & RF_ACTIVE) { 2451 error = bus_deactivate_resource(child, r); 2452 if (error) 2453 return (error); 2454 } 2455 return (rman_release_resource(r)); 2456 } 2457 return (bus_generic_release_resource(dev, child, r)); 2458 } 2459 2460 static int 2461 pcib_activate_resource(device_t dev, device_t child, struct resource *r) 2462 { 2463 struct pcib_softc *sc = device_get_softc(dev); 2464 struct resource_map map; 2465 int error, type; 2466 2467 if (!pcib_is_resource_managed(sc, r)) 2468 return (bus_generic_activate_resource(dev, child, r)); 2469 2470 error = rman_activate_resource(r); 2471 if (error != 0) 2472 return (error); 2473 2474 type = rman_get_type(r); 2475 if ((rman_get_flags(r) & RF_UNMAPPED) == 0 && 2476 (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT)) { 2477 error = BUS_MAP_RESOURCE(dev, child, r, NULL, &map); 2478 if (error != 0) { 2479 rman_deactivate_resource(r); 2480 return (error); 2481 } 2482 2483 rman_set_mapping(r, &map); 2484 } 2485 return (0); 2486 } 2487 2488 static int 2489 pcib_deactivate_resource(device_t dev, device_t child, struct resource *r) 2490 { 2491 struct pcib_softc *sc = device_get_softc(dev); 2492 struct resource_map map; 2493 int error, type; 2494 2495 if (!pcib_is_resource_managed(sc, r)) 2496 return (bus_generic_deactivate_resource(dev, child, r)); 2497 2498 error = rman_deactivate_resource(r); 2499 if (error != 0) 2500 return (error); 2501 2502 type = rman_get_type(r); 2503 if ((rman_get_flags(r) & RF_UNMAPPED) == 0 && 2504 (type == SYS_RES_MEMORY || type == SYS_RES_IOPORT)) { 2505 rman_get_mapping(r, &map); 2506 BUS_UNMAP_RESOURCE(dev, child, r, &map); 2507 } 2508 return (0); 2509 } 2510 2511 static struct resource * 2512 pcib_find_parent_resource(struct pcib_window *w, struct resource *r) 2513 { 2514 for (int i = 0; i < w->count; i++) { 2515 if (rman_get_start(w->res[i]) <= rman_get_start(r) && 2516 rman_get_end(w->res[i]) >= rman_get_end(r)) 2517 return (w->res[i]); 2518 } 2519 return (NULL); 2520 } 2521 2522 static int 2523 pcib_map_resource(device_t dev, device_t child, struct resource *r, 2524 struct resource_map_request *argsp, struct resource_map *map) 2525 { 2526 struct pcib_softc *sc = device_get_softc(dev); 2527 struct resource_map_request args; 2528 struct pcib_window *w; 2529 struct resource *pres; 2530 rman_res_t length, start; 2531 int error; 2532 2533 w = pcib_get_resource_window(sc, r); 2534 if (w == NULL) 2535 return (bus_generic_map_resource(dev, child, r, argsp, map)); 2536 2537 /* Resources must be active to be mapped. */ 2538 if (!(rman_get_flags(r) & RF_ACTIVE)) 2539 return (ENXIO); 2540 2541 resource_init_map_request(&args); 2542 error = resource_validate_map_request(r, argsp, &args, &start, &length); 2543 if (error) 2544 return (error); 2545 2546 pres = pcib_find_parent_resource(w, r); 2547 if (pres == NULL) 2548 return (ENOENT); 2549 2550 args.offset = start - rman_get_start(pres); 2551 args.length = length; 2552 return (bus_map_resource(dev, pres, &args, map)); 2553 } 2554 2555 static int 2556 pcib_unmap_resource(device_t dev, device_t child, struct resource *r, 2557 struct resource_map *map) 2558 { 2559 struct pcib_softc *sc = device_get_softc(dev); 2560 struct pcib_window *w; 2561 struct resource *pres; 2562 2563 w = pcib_get_resource_window(sc, r); 2564 if (w == NULL) 2565 return (bus_generic_unmap_resource(dev, child, r, map)); 2566 2567 pres = pcib_find_parent_resource(w, r); 2568 if (pres == NULL) 2569 return (ENOENT); 2570 return (bus_unmap_resource(dev, pres, map)); 2571 } 2572 #else 2573 /* 2574 * We have to trap resource allocation requests and ensure that the bridge 2575 * is set up to, or capable of handling them. 2576 */ 2577 static struct resource * 2578 pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, 2579 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 2580 { 2581 struct pcib_softc *sc = device_get_softc(dev); 2582 const char *name, *suffix; 2583 int ok; 2584 2585 /* 2586 * Fail the allocation for this range if it's not supported. 2587 */ 2588 name = device_get_nameunit(child); 2589 if (name == NULL) { 2590 name = ""; 2591 suffix = ""; 2592 } else 2593 suffix = " "; 2594 switch (type) { 2595 case SYS_RES_IOPORT: 2596 ok = 0; 2597 if (!pcib_is_io_open(sc)) 2598 break; 2599 ok = (start >= sc->iobase && end <= sc->iolimit); 2600 2601 /* 2602 * Make sure we allow access to VGA I/O addresses when the 2603 * bridge has the "VGA Enable" bit set. 2604 */ 2605 if (!ok && pci_is_vga_ioport_range(start, end)) 2606 ok = (sc->bridgectl & PCIB_BCR_VGA_ENABLE) ? 1 : 0; 2607 2608 if ((sc->flags & PCIB_SUBTRACTIVE) == 0) { 2609 if (!ok) { 2610 if (start < sc->iobase) 2611 start = sc->iobase; 2612 if (end > sc->iolimit) 2613 end = sc->iolimit; 2614 if (start < end) 2615 ok = 1; 2616 } 2617 } else { 2618 ok = 1; 2619 #if 0 2620 /* 2621 * If we overlap with the subtractive range, then 2622 * pick the upper range to use. 2623 */ 2624 if (start < sc->iolimit && end > sc->iobase) 2625 start = sc->iolimit + 1; 2626 #endif 2627 } 2628 if (end < start) { 2629 device_printf(dev, "ioport: end (%jx) < start (%jx)\n", 2630 end, start); 2631 start = 0; 2632 end = 0; 2633 ok = 0; 2634 } 2635 if (!ok) { 2636 device_printf(dev, "%s%srequested unsupported I/O " 2637 "range 0x%jx-0x%jx (decoding 0x%x-0x%x)\n", 2638 name, suffix, start, end, sc->iobase, sc->iolimit); 2639 return (NULL); 2640 } 2641 if (bootverbose) 2642 device_printf(dev, 2643 "%s%srequested I/O range 0x%jx-0x%jx: in range\n", 2644 name, suffix, start, end); 2645 break; 2646 2647 case SYS_RES_MEMORY: 2648 ok = 0; 2649 if (pcib_is_nonprefetch_open(sc)) 2650 ok = ok || (start >= sc->membase && end <= sc->memlimit); 2651 if (pcib_is_prefetch_open(sc)) 2652 ok = ok || (start >= sc->pmembase && end <= sc->pmemlimit); 2653 2654 /* 2655 * Make sure we allow access to VGA memory addresses when the 2656 * bridge has the "VGA Enable" bit set. 2657 */ 2658 if (!ok && pci_is_vga_memory_range(start, end)) 2659 ok = (sc->bridgectl & PCIB_BCR_VGA_ENABLE) ? 1 : 0; 2660 2661 if ((sc->flags & PCIB_SUBTRACTIVE) == 0) { 2662 if (!ok) { 2663 ok = 1; 2664 if (flags & RF_PREFETCHABLE) { 2665 if (pcib_is_prefetch_open(sc)) { 2666 if (start < sc->pmembase) 2667 start = sc->pmembase; 2668 if (end > sc->pmemlimit) 2669 end = sc->pmemlimit; 2670 } else { 2671 ok = 0; 2672 } 2673 } else { /* non-prefetchable */ 2674 if (pcib_is_nonprefetch_open(sc)) { 2675 if (start < sc->membase) 2676 start = sc->membase; 2677 if (end > sc->memlimit) 2678 end = sc->memlimit; 2679 } else { 2680 ok = 0; 2681 } 2682 } 2683 } 2684 } else if (!ok) { 2685 ok = 1; /* subtractive bridge: always ok */ 2686 #if 0 2687 if (pcib_is_nonprefetch_open(sc)) { 2688 if (start < sc->memlimit && end > sc->membase) 2689 start = sc->memlimit + 1; 2690 } 2691 if (pcib_is_prefetch_open(sc)) { 2692 if (start < sc->pmemlimit && end > sc->pmembase) 2693 start = sc->pmemlimit + 1; 2694 } 2695 #endif 2696 } 2697 if (end < start) { 2698 device_printf(dev, "memory: end (%jx) < start (%jx)\n", 2699 end, start); 2700 start = 0; 2701 end = 0; 2702 ok = 0; 2703 } 2704 if (!ok && bootverbose) 2705 device_printf(dev, 2706 "%s%srequested unsupported memory range %#jx-%#jx " 2707 "(decoding %#jx-%#jx, %#jx-%#jx)\n", 2708 name, suffix, start, end, 2709 (uintmax_t)sc->membase, (uintmax_t)sc->memlimit, 2710 (uintmax_t)sc->pmembase, (uintmax_t)sc->pmemlimit); 2711 if (!ok) 2712 return (NULL); 2713 if (bootverbose) 2714 device_printf(dev,"%s%srequested memory range " 2715 "0x%jx-0x%jx: good\n", 2716 name, suffix, start, end); 2717 break; 2718 2719 default: 2720 break; 2721 } 2722 /* 2723 * Bridge is OK decoding this resource, so pass it up. 2724 */ 2725 return (bus_generic_alloc_resource(dev, child, type, rid, start, end, 2726 count, flags)); 2727 } 2728 #endif 2729 2730 /* 2731 * If ARI is enabled on this downstream port, translate the function number 2732 * to the non-ARI slot/function. The downstream port will convert it back in 2733 * hardware. If ARI is not enabled slot and func are not modified. 2734 */ 2735 static __inline void 2736 pcib_xlate_ari(device_t pcib, int bus, int *slot, int *func) 2737 { 2738 struct pcib_softc *sc; 2739 int ari_func; 2740 2741 sc = device_get_softc(pcib); 2742 ari_func = *func; 2743 2744 if (sc->flags & PCIB_ENABLE_ARI) { 2745 KASSERT(*slot == 0, 2746 ("Non-zero slot number with ARI enabled!")); 2747 *slot = PCIE_ARI_SLOT(ari_func); 2748 *func = PCIE_ARI_FUNC(ari_func); 2749 } 2750 } 2751 2752 static void 2753 pcib_enable_ari(struct pcib_softc *sc, uint32_t pcie_pos) 2754 { 2755 uint32_t ctl2; 2756 2757 ctl2 = pci_read_config(sc->dev, pcie_pos + PCIER_DEVICE_CTL2, 4); 2758 ctl2 |= PCIEM_CTL2_ARI; 2759 pci_write_config(sc->dev, pcie_pos + PCIER_DEVICE_CTL2, ctl2, 4); 2760 2761 sc->flags |= PCIB_ENABLE_ARI; 2762 } 2763 2764 /* 2765 * PCIB interface. 2766 */ 2767 int 2768 pcib_maxslots(device_t dev) 2769 { 2770 #if !defined(__amd64__) && !defined(__i386__) 2771 uint32_t pcie_pos; 2772 uint16_t val; 2773 2774 /* 2775 * If this is a PCIe rootport or downstream switch port, there's only 2776 * one slot permitted. 2777 */ 2778 if (pci_find_cap(dev, PCIY_EXPRESS, &pcie_pos) == 0) { 2779 val = pci_read_config(dev, pcie_pos + PCIER_FLAGS, 2); 2780 val &= PCIEM_FLAGS_TYPE; 2781 if (val == PCIEM_TYPE_ROOT_PORT || 2782 val == PCIEM_TYPE_DOWNSTREAM_PORT) 2783 return (0); 2784 } 2785 #endif 2786 return (PCI_SLOTMAX); 2787 } 2788 2789 static int 2790 pcib_ari_maxslots(device_t dev) 2791 { 2792 struct pcib_softc *sc; 2793 2794 sc = device_get_softc(dev); 2795 2796 if (sc->flags & PCIB_ENABLE_ARI) 2797 return (PCIE_ARI_SLOTMAX); 2798 else 2799 return (pcib_maxslots(dev)); 2800 } 2801 2802 static int 2803 pcib_ari_maxfuncs(device_t dev) 2804 { 2805 struct pcib_softc *sc; 2806 2807 sc = device_get_softc(dev); 2808 2809 if (sc->flags & PCIB_ENABLE_ARI) 2810 return (PCIE_ARI_FUNCMAX); 2811 else 2812 return (PCI_FUNCMAX); 2813 } 2814 2815 static void 2816 pcib_ari_decode_rid(device_t pcib, uint16_t rid, int *bus, int *slot, 2817 int *func) 2818 { 2819 struct pcib_softc *sc; 2820 2821 sc = device_get_softc(pcib); 2822 2823 *bus = PCI_RID2BUS(rid); 2824 if (sc->flags & PCIB_ENABLE_ARI) { 2825 *slot = PCIE_ARI_RID2SLOT(rid); 2826 *func = PCIE_ARI_RID2FUNC(rid); 2827 } else { 2828 *slot = PCI_RID2SLOT(rid); 2829 *func = PCI_RID2FUNC(rid); 2830 } 2831 } 2832 2833 /* 2834 * Since we are a child of a PCI bus, its parent must support the pcib interface. 2835 */ 2836 static uint32_t 2837 pcib_read_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, int width) 2838 { 2839 #ifdef PCI_HP 2840 struct pcib_softc *sc; 2841 2842 sc = device_get_softc(dev); 2843 if (!pcib_present(sc)) { 2844 switch (width) { 2845 case 2: 2846 return (0xffff); 2847 case 1: 2848 return (0xff); 2849 default: 2850 return (0xffffffff); 2851 } 2852 } 2853 #endif 2854 pcib_xlate_ari(dev, b, &s, &f); 2855 return(PCIB_READ_CONFIG(device_get_parent(device_get_parent(dev)), b, s, 2856 f, reg, width)); 2857 } 2858 2859 static void 2860 pcib_write_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, uint32_t val, int width) 2861 { 2862 #ifdef PCI_HP 2863 struct pcib_softc *sc; 2864 2865 sc = device_get_softc(dev); 2866 if (!pcib_present(sc)) 2867 return; 2868 #endif 2869 pcib_xlate_ari(dev, b, &s, &f); 2870 PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, 2871 reg, val, width); 2872 } 2873 2874 /* 2875 * Route an interrupt across a PCI bridge. 2876 */ 2877 int 2878 pcib_route_interrupt(device_t pcib, device_t dev, int pin) 2879 { 2880 device_t bus; 2881 int parent_intpin; 2882 int intnum; 2883 2884 /* 2885 * 2886 * The PCI standard defines a swizzle of the child-side device/intpin to 2887 * the parent-side intpin as follows. 2888 * 2889 * device = device on child bus 2890 * child_intpin = intpin on child bus slot (0-3) 2891 * parent_intpin = intpin on parent bus slot (0-3) 2892 * 2893 * parent_intpin = (device + child_intpin) % 4 2894 */ 2895 parent_intpin = (pci_get_slot(dev) + (pin - 1)) % 4; 2896 2897 /* 2898 * Our parent is a PCI bus. Its parent must export the pcib interface 2899 * which includes the ability to route interrupts. 2900 */ 2901 bus = device_get_parent(pcib); 2902 intnum = PCIB_ROUTE_INTERRUPT(device_get_parent(bus), pcib, parent_intpin + 1); 2903 if (PCI_INTERRUPT_VALID(intnum) && bootverbose) { 2904 device_printf(pcib, "slot %d INT%c is routed to irq %d\n", 2905 pci_get_slot(dev), 'A' + pin - 1, intnum); 2906 } 2907 return(intnum); 2908 } 2909 2910 /* Pass request to alloc MSI/MSI-X messages up to the parent bridge. */ 2911 int 2912 pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs) 2913 { 2914 struct pcib_softc *sc = device_get_softc(pcib); 2915 device_t bus; 2916 2917 if (sc->flags & PCIB_DISABLE_MSI) 2918 return (ENXIO); 2919 bus = device_get_parent(pcib); 2920 return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount, 2921 irqs)); 2922 } 2923 2924 /* Pass request to release MSI/MSI-X messages up to the parent bridge. */ 2925 int 2926 pcib_release_msi(device_t pcib, device_t dev, int count, int *irqs) 2927 { 2928 device_t bus; 2929 2930 bus = device_get_parent(pcib); 2931 return (PCIB_RELEASE_MSI(device_get_parent(bus), dev, count, irqs)); 2932 } 2933 2934 /* Pass request to alloc an MSI-X message up to the parent bridge. */ 2935 int 2936 pcib_alloc_msix(device_t pcib, device_t dev, int *irq) 2937 { 2938 struct pcib_softc *sc = device_get_softc(pcib); 2939 device_t bus; 2940 2941 if (sc->flags & PCIB_DISABLE_MSIX) 2942 return (ENXIO); 2943 bus = device_get_parent(pcib); 2944 return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq)); 2945 } 2946 2947 /* Pass request to release an MSI-X message up to the parent bridge. */ 2948 int 2949 pcib_release_msix(device_t pcib, device_t dev, int irq) 2950 { 2951 device_t bus; 2952 2953 bus = device_get_parent(pcib); 2954 return (PCIB_RELEASE_MSIX(device_get_parent(bus), dev, irq)); 2955 } 2956 2957 /* Pass request to map MSI/MSI-X message up to parent bridge. */ 2958 int 2959 pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, 2960 uint32_t *data) 2961 { 2962 device_t bus; 2963 int error; 2964 2965 bus = device_get_parent(pcib); 2966 error = PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data); 2967 if (error) 2968 return (error); 2969 2970 pci_ht_map_msi(pcib, *addr); 2971 return (0); 2972 } 2973 2974 /* Pass request for device power state up to parent bridge. */ 2975 int 2976 pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate) 2977 { 2978 device_t bus; 2979 2980 bus = device_get_parent(pcib); 2981 return (PCIB_POWER_FOR_SLEEP(bus, dev, pstate)); 2982 } 2983 2984 static int 2985 pcib_ari_enabled(device_t pcib) 2986 { 2987 struct pcib_softc *sc; 2988 2989 sc = device_get_softc(pcib); 2990 2991 return ((sc->flags & PCIB_ENABLE_ARI) != 0); 2992 } 2993 2994 static int 2995 pcib_ari_get_id(device_t pcib, device_t dev, enum pci_id_type type, 2996 uintptr_t *id) 2997 { 2998 struct pcib_softc *sc; 2999 device_t bus_dev; 3000 uint8_t bus, slot, func; 3001 3002 if (type != PCI_ID_RID) { 3003 bus_dev = device_get_parent(pcib); 3004 return (PCIB_GET_ID(device_get_parent(bus_dev), dev, type, id)); 3005 } 3006 3007 sc = device_get_softc(pcib); 3008 3009 if (sc->flags & PCIB_ENABLE_ARI) { 3010 bus = pci_get_bus(dev); 3011 func = pci_get_function(dev); 3012 3013 *id = (PCI_ARI_RID(bus, func)); 3014 } else { 3015 bus = pci_get_bus(dev); 3016 slot = pci_get_slot(dev); 3017 func = pci_get_function(dev); 3018 3019 *id = (PCI_RID(bus, slot, func)); 3020 } 3021 3022 return (0); 3023 } 3024 3025 /* 3026 * Check that the downstream port (pcib) and the endpoint device (dev) both 3027 * support ARI. If so, enable it and return 0, otherwise return an error. 3028 */ 3029 static int 3030 pcib_try_enable_ari(device_t pcib, device_t dev) 3031 { 3032 struct pcib_softc *sc; 3033 int error; 3034 uint32_t cap2; 3035 int ari_cap_off; 3036 uint32_t ari_ver; 3037 uint32_t pcie_pos; 3038 3039 sc = device_get_softc(pcib); 3040 3041 /* 3042 * ARI is controlled in a register in the PCIe capability structure. 3043 * If the downstream port does not have the PCIe capability structure 3044 * then it does not support ARI. 3045 */ 3046 error = pci_find_cap(pcib, PCIY_EXPRESS, &pcie_pos); 3047 if (error != 0) 3048 return (ENODEV); 3049 3050 /* Check that the PCIe port advertises ARI support. */ 3051 cap2 = pci_read_config(pcib, pcie_pos + PCIER_DEVICE_CAP2, 4); 3052 if (!(cap2 & PCIEM_CAP2_ARI)) 3053 return (ENODEV); 3054 3055 /* 3056 * Check that the endpoint device advertises ARI support via the ARI 3057 * extended capability structure. 3058 */ 3059 error = pci_find_extcap(dev, PCIZ_ARI, &ari_cap_off); 3060 if (error != 0) 3061 return (ENODEV); 3062 3063 /* 3064 * Finally, check that the endpoint device supports the same version 3065 * of ARI that we do. 3066 */ 3067 ari_ver = pci_read_config(dev, ari_cap_off, 4); 3068 if (PCI_EXTCAP_VER(ari_ver) != PCIB_SUPPORTED_ARI_VER) { 3069 if (bootverbose) 3070 device_printf(pcib, 3071 "Unsupported version of ARI (%d) detected\n", 3072 PCI_EXTCAP_VER(ari_ver)); 3073 3074 return (ENXIO); 3075 } 3076 3077 pcib_enable_ari(sc, pcie_pos); 3078 3079 return (0); 3080 } 3081 3082 int 3083 pcib_request_feature_allow(device_t pcib, device_t dev, 3084 enum pci_feature feature) 3085 { 3086 /* 3087 * No host firmware we have to negotiate with, so we allow 3088 * every valid feature requested. 3089 */ 3090 switch (feature) { 3091 case PCI_FEATURE_AER: 3092 case PCI_FEATURE_HP: 3093 break; 3094 default: 3095 return (EINVAL); 3096 } 3097 3098 return (0); 3099 } 3100 3101 int 3102 pcib_request_feature(device_t dev, enum pci_feature feature) 3103 { 3104 3105 /* 3106 * Invoke PCIB_REQUEST_FEATURE of this bridge first in case 3107 * the firmware overrides the method of PCI-PCI bridges. 3108 */ 3109 return (PCIB_REQUEST_FEATURE(dev, dev, feature)); 3110 } 3111 3112 /* 3113 * Pass the request to use this PCI feature up the tree. Either there's a 3114 * firmware like ACPI that's using this feature that will approve (or deny) the 3115 * request to take it over, or the platform has no such firmware, in which case 3116 * the request will be approved. If the request is approved, the OS is expected 3117 * to make use of the feature or render it harmless. 3118 */ 3119 static int 3120 pcib_request_feature_default(device_t pcib, device_t dev, 3121 enum pci_feature feature) 3122 { 3123 device_t bus; 3124 3125 /* 3126 * Our parent is necessarily a pci bus. Its parent will either be 3127 * another pci bridge (which passes it up) or a host bridge that can 3128 * approve or reject the request. 3129 */ 3130 bus = device_get_parent(pcib); 3131 return (PCIB_REQUEST_FEATURE(device_get_parent(bus), dev, feature)); 3132 } 3133 3134 static int 3135 pcib_reset_child(device_t dev, device_t child, int flags) 3136 { 3137 struct pci_devinfo *pdinfo; 3138 int error; 3139 3140 error = 0; 3141 if (dev == NULL || device_get_parent(child) != dev) 3142 goto out; 3143 error = ENXIO; 3144 if (device_get_devclass(child) != devclass_find("pci")) 3145 goto out; 3146 pdinfo = device_get_ivars(dev); 3147 if (pdinfo->cfg.pcie.pcie_location != 0 && 3148 (pdinfo->cfg.pcie.pcie_type == PCIEM_TYPE_DOWNSTREAM_PORT || 3149 pdinfo->cfg.pcie.pcie_type == PCIEM_TYPE_ROOT_PORT)) { 3150 error = bus_helper_reset_prepare(child, flags); 3151 if (error == 0) { 3152 error = pcie_link_reset(dev, 3153 pdinfo->cfg.pcie.pcie_location); 3154 /* XXXKIB call _post even if error != 0 ? */ 3155 bus_helper_reset_post(child, flags); 3156 } 3157 } 3158 out: 3159 return (error); 3160 } 3161