1 /*- 2 * Copyright (c) 2002-2004 M. Warner Losh. 3 * Copyright (c) 2000-2001 Jonathan Chen. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 */ 28 29 /*- 30 * Copyright (c) 1998, 1999 and 2000 31 * HAYAKAWA Koichi. All rights reserved. 32 * 33 * Redistribution and use in source and binary forms, with or without 34 * modification, are permitted provided that the following conditions 35 * are met: 36 * 1. Redistributions of source code must retain the above copyright 37 * notice, this list of conditions and the following disclaimer. 38 * 2. Redistributions in binary form must reproduce the above copyright 39 * notice, this list of conditions and the following disclaimer in the 40 * documentation and/or other materials provided with the distribution. 41 * 3. All advertising materials mentioning features or use of this software 42 * must display the following acknowledgement: 43 * This product includes software developed by HAYAKAWA Koichi. 44 * 4. The name of the author may not be used to endorse or promote products 45 * derived from this software without specific prior written permission. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 48 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 49 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 50 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 51 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 52 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 53 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 54 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 55 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 56 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 57 */ 58 59 /* 60 * Driver for PCI to CardBus Bridge chips 61 * and PCI to PCMCIA Bridge chips 62 * and ISA to PCMCIA host adapters 63 * and C Bus to PCMCIA host adapters 64 * 65 * References: 66 * TI Datasheets: 67 * http://www-s.ti.com/cgi-bin/sc/generic2.cgi?family=PCI+CARDBUS+CONTROLLERS 68 * 69 * Written by Jonathan Chen <jon@freebsd.org> 70 * The author would like to acknowledge: 71 * * HAYAKAWA Koichi: Author of the NetBSD code for the same thing 72 * * Warner Losh: Newbus/newcard guru and author of the pccard side of things 73 * * YAMAMOTO Shigeru: Author of another FreeBSD cardbus driver 74 * * David Cross: Author of the initial ugly hack for a specific cardbus card 75 */ 76 77 #include <sys/cdefs.h> 78 __FBSDID("$FreeBSD$"); 79 80 #include <sys/param.h> 81 #include <sys/bus.h> 82 #include <sys/condvar.h> 83 #include <sys/errno.h> 84 #include <sys/kernel.h> 85 #include <sys/module.h> 86 #include <sys/kthread.h> 87 #include <sys/interrupt.h> 88 #include <sys/lock.h> 89 #include <sys/malloc.h> 90 #include <sys/mutex.h> 91 #include <sys/proc.h> 92 #include <sys/rman.h> 93 #include <sys/sysctl.h> 94 #include <sys/systm.h> 95 #include <machine/bus.h> 96 #include <machine/resource.h> 97 98 #include <dev/pci/pcireg.h> 99 #include <dev/pci/pcivar.h> 100 #include <dev/pci/pcib_private.h> 101 102 #include <dev/pccard/pccardreg.h> 103 #include <dev/pccard/pccardvar.h> 104 105 #include <dev/exca/excareg.h> 106 #include <dev/exca/excavar.h> 107 108 #include <dev/pccbb/pccbbreg.h> 109 #include <dev/pccbb/pccbbvar.h> 110 111 #include "power_if.h" 112 #include "card_if.h" 113 #include "pcib_if.h" 114 115 #define DPRINTF(x) do { if (cbb_debug) printf x; } while (0) 116 #define DEVPRINTF(x) do { if (cbb_debug) device_printf x; } while (0) 117 118 #define PCI_MASK_CONFIG(DEV,REG,MASK,SIZE) \ 119 pci_write_config(DEV, REG, pci_read_config(DEV, REG, SIZE) MASK, SIZE) 120 #define PCI_MASK2_CONFIG(DEV,REG,MASK1,MASK2,SIZE) \ 121 pci_write_config(DEV, REG, ( \ 122 pci_read_config(DEV, REG, SIZE) MASK1) MASK2, SIZE) 123 124 #define CBB_CARD_PRESENT(s) ((s & CBB_STATE_CD) == 0) 125 126 #define CBB_START_MEM 0x88000000 127 #define CBB_START_32_IO 0x1000 128 #define CBB_START_16_IO 0x100 129 130 devclass_t cbb_devclass; 131 132 /* sysctl vars */ 133 static SYSCTL_NODE(_hw, OID_AUTO, cbb, CTLFLAG_RD, 0, "CBB parameters"); 134 135 /* There's no way to say TUNEABLE_LONG to get the right types */ 136 u_long cbb_start_mem = CBB_START_MEM; 137 SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_memory, CTLFLAG_RWTUN, 138 &cbb_start_mem, CBB_START_MEM, 139 "Starting address for memory allocations"); 140 141 u_long cbb_start_16_io = CBB_START_16_IO; 142 SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_16_io, CTLFLAG_RWTUN, 143 &cbb_start_16_io, CBB_START_16_IO, 144 "Starting ioport for 16-bit cards"); 145 146 u_long cbb_start_32_io = CBB_START_32_IO; 147 SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_32_io, CTLFLAG_RWTUN, 148 &cbb_start_32_io, CBB_START_32_IO, 149 "Starting ioport for 32-bit cards"); 150 151 int cbb_debug = 0; 152 SYSCTL_INT(_hw_cbb, OID_AUTO, debug, CTLFLAG_RWTUN, &cbb_debug, 0, 153 "Verbose cardbus bridge debugging"); 154 155 static void cbb_insert(struct cbb_softc *sc); 156 static void cbb_removal(struct cbb_softc *sc); 157 static uint32_t cbb_detect_voltage(device_t brdev); 158 static int cbb_cardbus_reset_power(device_t brdev, device_t child, int on); 159 static int cbb_cardbus_io_open(device_t brdev, int win, uint32_t start, 160 uint32_t end); 161 static int cbb_cardbus_mem_open(device_t brdev, int win, 162 uint32_t start, uint32_t end); 163 static void cbb_cardbus_auto_open(struct cbb_softc *sc, int type); 164 static int cbb_cardbus_activate_resource(device_t brdev, device_t child, 165 int type, int rid, struct resource *res); 166 static int cbb_cardbus_deactivate_resource(device_t brdev, 167 device_t child, int type, int rid, struct resource *res); 168 static struct resource *cbb_cardbus_alloc_resource(device_t brdev, 169 device_t child, int type, int *rid, rman_res_t start, 170 rman_res_t end, rman_res_t count, u_int flags); 171 static int cbb_cardbus_release_resource(device_t brdev, device_t child, 172 int type, int rid, struct resource *res); 173 static int cbb_cardbus_power_enable_socket(device_t brdev, 174 device_t child); 175 static int cbb_cardbus_power_disable_socket(device_t brdev, 176 device_t child); 177 static int cbb_func_filt(void *arg); 178 static void cbb_func_intr(void *arg); 179 180 static void 181 cbb_remove_res(struct cbb_softc *sc, struct resource *res) 182 { 183 struct cbb_reslist *rle; 184 185 SLIST_FOREACH(rle, &sc->rl, link) { 186 if (rle->res == res) { 187 SLIST_REMOVE(&sc->rl, rle, cbb_reslist, link); 188 free(rle, M_DEVBUF); 189 return; 190 } 191 } 192 } 193 194 static struct resource * 195 cbb_find_res(struct cbb_softc *sc, int type, int rid) 196 { 197 struct cbb_reslist *rle; 198 199 SLIST_FOREACH(rle, &sc->rl, link) 200 if (SYS_RES_MEMORY == rle->type && rid == rle->rid) 201 return (rle->res); 202 return (NULL); 203 } 204 205 static void 206 cbb_insert_res(struct cbb_softc *sc, struct resource *res, int type, 207 int rid) 208 { 209 struct cbb_reslist *rle; 210 211 /* 212 * Need to record allocated resource so we can iterate through 213 * it later. 214 */ 215 rle = malloc(sizeof(struct cbb_reslist), M_DEVBUF, M_NOWAIT); 216 if (rle == NULL) 217 panic("cbb_cardbus_alloc_resource: can't record entry!"); 218 rle->res = res; 219 rle->type = type; 220 rle->rid = rid; 221 SLIST_INSERT_HEAD(&sc->rl, rle, link); 222 } 223 224 static void 225 cbb_destroy_res(struct cbb_softc *sc) 226 { 227 struct cbb_reslist *rle; 228 229 while ((rle = SLIST_FIRST(&sc->rl)) != NULL) { 230 device_printf(sc->dev, "Danger Will Robinson: Resource " 231 "left allocated! This is a bug... " 232 "(rid=%x, type=%d, addr=%jx)\n", rle->rid, rle->type, 233 rman_get_start(rle->res)); 234 SLIST_REMOVE_HEAD(&sc->rl, link); 235 free(rle, M_DEVBUF); 236 } 237 } 238 239 /* 240 * Disable function interrupts by telling the bridge to generate IRQ1 241 * interrupts. These interrupts aren't really generated by the chip, since 242 * IRQ1 is reserved. Some chipsets assert INTA# inappropriately during 243 * initialization, so this helps to work around the problem. 244 * 245 * XXX We can't do this workaround for all chipsets, because this 246 * XXX causes interference with the keyboard because somechipsets will 247 * XXX actually signal IRQ1 over their serial interrupt connections to 248 * XXX the south bridge. Disable it it for now. 249 */ 250 void 251 cbb_disable_func_intr(struct cbb_softc *sc) 252 { 253 #if 0 254 uint8_t reg; 255 256 reg = (exca_getb(&sc->exca[0], EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) | 257 EXCA_INTR_IRQ_RESERVED1; 258 exca_putb(&sc->exca[0], EXCA_INTR, reg); 259 #endif 260 } 261 262 /* 263 * Enable function interrupts. We turn on function interrupts when the card 264 * requests an interrupt. The PCMCIA standard says that we should set 265 * the lower 4 bits to 0 to route via PCI. Note: we call this for both 266 * CardBus and R2 (PC Card) cases, but it should have no effect on CardBus 267 * cards. 268 */ 269 static void 270 cbb_enable_func_intr(struct cbb_softc *sc) 271 { 272 uint8_t reg; 273 274 reg = (exca_getb(&sc->exca[0], EXCA_INTR) & ~EXCA_INTR_IRQ_MASK) | 275 EXCA_INTR_IRQ_NONE; 276 exca_putb(&sc->exca[0], EXCA_INTR, reg); 277 } 278 279 int 280 cbb_detach(device_t brdev) 281 { 282 struct cbb_softc *sc = device_get_softc(brdev); 283 device_t *devlist; 284 int tmp, tries, error, numdevs; 285 286 /* 287 * Before we delete the children (which we have to do because 288 * attach doesn't check for children busses correctly), we have 289 * to detach the children. Even if we didn't need to delete the 290 * children, we have to detach them. 291 */ 292 error = bus_generic_detach(brdev); 293 if (error != 0) 294 return (error); 295 296 /* 297 * Since the attach routine doesn't search for children before it 298 * attaches them to this device, we must delete them here in order 299 * for the kldload/unload case to work. If we failed to do that, then 300 * we'd get duplicate devices when cbb.ko was reloaded. 301 */ 302 tries = 10; 303 do { 304 error = device_get_children(brdev, &devlist, &numdevs); 305 if (error == 0) 306 break; 307 /* 308 * Try hard to cope with low memory. 309 */ 310 if (error == ENOMEM) { 311 pause("cbbnomem", 1); 312 continue; 313 } 314 } while (tries-- > 0); 315 for (tmp = 0; tmp < numdevs; tmp++) 316 device_delete_child(brdev, devlist[tmp]); 317 free(devlist, M_TEMP); 318 319 /* Turn off the interrupts */ 320 cbb_set(sc, CBB_SOCKET_MASK, 0); 321 322 /* reset 16-bit pcmcia bus */ 323 exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET); 324 325 /* turn off power */ 326 cbb_power(brdev, CARD_OFF); 327 328 /* Ack the interrupt */ 329 cbb_set(sc, CBB_SOCKET_EVENT, 0xffffffff); 330 331 /* 332 * Wait for the thread to die. kproc_exit will do a wakeup 333 * on the event thread's struct proc * so that we know it is 334 * safe to proceed. IF the thread is running, set the please 335 * die flag and wait for it to comply. Since the wakeup on 336 * the event thread happens only in kproc_exit, we don't 337 * need to loop here. 338 */ 339 bus_teardown_intr(brdev, sc->irq_res, sc->intrhand); 340 mtx_lock(&sc->mtx); 341 sc->flags |= CBB_KTHREAD_DONE; 342 while (sc->flags & CBB_KTHREAD_RUNNING) { 343 DEVPRINTF((sc->dev, "Waiting for thread to die\n")); 344 wakeup(&sc->intrhand); 345 msleep(sc->event_thread, &sc->mtx, PWAIT, "cbbun", 0); 346 } 347 mtx_unlock(&sc->mtx); 348 349 bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res); 350 bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE, 351 sc->base_res); 352 mtx_destroy(&sc->mtx); 353 return (0); 354 } 355 356 int 357 cbb_setup_intr(device_t dev, device_t child, struct resource *irq, 358 int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg, 359 void **cookiep) 360 { 361 struct cbb_intrhand *ih; 362 struct cbb_softc *sc = device_get_softc(dev); 363 int err; 364 365 if (filt == NULL && intr == NULL) 366 return (EINVAL); 367 ih = malloc(sizeof(struct cbb_intrhand), M_DEVBUF, M_NOWAIT); 368 if (ih == NULL) 369 return (ENOMEM); 370 *cookiep = ih; 371 ih->filt = filt; 372 ih->intr = intr; 373 ih->arg = arg; 374 ih->sc = sc; 375 /* 376 * XXX need to turn on ISA interrupts, if we ever support them, but 377 * XXX for now that's all we need to do. 378 */ 379 err = BUS_SETUP_INTR(device_get_parent(dev), child, irq, flags, 380 filt ? cbb_func_filt : NULL, intr ? cbb_func_intr : NULL, ih, 381 &ih->cookie); 382 if (err != 0) { 383 free(ih, M_DEVBUF); 384 return (err); 385 } 386 cbb_enable_func_intr(sc); 387 sc->cardok = 1; 388 return 0; 389 } 390 391 int 392 cbb_teardown_intr(device_t dev, device_t child, struct resource *irq, 393 void *cookie) 394 { 395 struct cbb_intrhand *ih; 396 int err; 397 398 /* XXX Need to do different things for ISA interrupts. */ 399 ih = (struct cbb_intrhand *) cookie; 400 err = BUS_TEARDOWN_INTR(device_get_parent(dev), child, irq, 401 ih->cookie); 402 if (err != 0) 403 return (err); 404 free(ih, M_DEVBUF); 405 return (0); 406 } 407 408 409 void 410 cbb_driver_added(device_t brdev, driver_t *driver) 411 { 412 struct cbb_softc *sc = device_get_softc(brdev); 413 device_t *devlist; 414 device_t dev; 415 int tmp; 416 int numdevs; 417 int wake = 0; 418 419 DEVICE_IDENTIFY(driver, brdev); 420 tmp = device_get_children(brdev, &devlist, &numdevs); 421 if (tmp != 0) { 422 device_printf(brdev, "Cannot get children list, no reprobe\n"); 423 return; 424 } 425 for (tmp = 0; tmp < numdevs; tmp++) { 426 dev = devlist[tmp]; 427 if (device_get_state(dev) == DS_NOTPRESENT && 428 device_probe_and_attach(dev) == 0) 429 wake++; 430 } 431 free(devlist, M_TEMP); 432 433 if (wake > 0) 434 wakeup(&sc->intrhand); 435 } 436 437 void 438 cbb_child_detached(device_t brdev, device_t child) 439 { 440 struct cbb_softc *sc = device_get_softc(brdev); 441 442 /* I'm not sure we even need this */ 443 if (child != sc->cbdev && child != sc->exca[0].pccarddev) 444 device_printf(brdev, "Unknown child detached: %s\n", 445 device_get_nameunit(child)); 446 } 447 448 /************************************************************************/ 449 /* Kthreads */ 450 /************************************************************************/ 451 452 void 453 cbb_event_thread(void *arg) 454 { 455 struct cbb_softc *sc = arg; 456 uint32_t status; 457 int err; 458 int not_a_card = 0; 459 460 /* 461 * We need to act as a power sequencer on startup. Delay 2s/channel 462 * to ensure the other channels have had a chance to come up. We likely 463 * should add a lock that's shared on a per-slot basis so that only 464 * one power event can happen per slot at a time. 465 */ 466 pause("cbbstart", hz * device_get_unit(sc->dev) * 2); 467 mtx_lock(&sc->mtx); 468 sc->flags |= CBB_KTHREAD_RUNNING; 469 while ((sc->flags & CBB_KTHREAD_DONE) == 0) { 470 mtx_unlock(&sc->mtx); 471 /* 472 * We take out Giant here because we need it deep, 473 * down in the bowels of the vm system for mapping the 474 * memory we need to read the CIS. In addition, since 475 * we are adding/deleting devices from the dev tree, 476 * and that code isn't MP safe, we have to hold Giant. 477 */ 478 mtx_lock(&Giant); 479 status = cbb_get(sc, CBB_SOCKET_STATE); 480 DPRINTF(("Status is 0x%x\n", status)); 481 if (!CBB_CARD_PRESENT(status)) { 482 not_a_card = 0; /* We know card type */ 483 cbb_removal(sc); 484 } else if (status & CBB_STATE_NOT_A_CARD) { 485 /* 486 * Up to 10 times, try to rescan the card when we see 487 * NOT_A_CARD. 10 is somehwat arbitrary. When this 488 * pathology hits, there's a ~40% chance each try will 489 * fail. 10 tries takes about 5s and results in a 490 * 99.99% certainty of the results. 491 */ 492 if (not_a_card++ < 10) { 493 DEVPRINTF((sc->dev, 494 "Not a card bit set, rescanning\n")); 495 cbb_setb(sc, CBB_SOCKET_FORCE, CBB_FORCE_CV_TEST); 496 } else { 497 device_printf(sc->dev, 498 "Can't determine card type\n"); 499 } 500 } else { 501 not_a_card = 0; /* We know card type */ 502 cbb_insert(sc); 503 } 504 mtx_unlock(&Giant); 505 506 /* 507 * First time through we need to tell mountroot that we're 508 * done. 509 */ 510 if (sc->sc_root_token) { 511 root_mount_rel(sc->sc_root_token); 512 sc->sc_root_token = NULL; 513 } 514 515 /* 516 * Wait until it has been 250ms since the last time we 517 * get an interrupt. We handle the rest of the interrupt 518 * at the top of the loop. Although we clear the bit in the 519 * ISR, we signal sc->cv from the detach path after we've 520 * set the CBB_KTHREAD_DONE bit, so we can't do a simple 521 * 250ms sleep here. 522 * 523 * In our ISR, we turn off the card changed interrupt. Turn 524 * them back on here before we wait for them to happen. We 525 * turn them on/off so that we can tolerate a large latency 526 * between the time we signal cbb_event_thread and it gets 527 * a chance to run. 528 */ 529 mtx_lock(&sc->mtx); 530 cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD | CBB_SOCKET_MASK_CSTS); 531 msleep(&sc->intrhand, &sc->mtx, 0, "-", 0); 532 err = 0; 533 while (err != EWOULDBLOCK && 534 (sc->flags & CBB_KTHREAD_DONE) == 0) 535 err = msleep(&sc->intrhand, &sc->mtx, 0, "-", hz / 5); 536 } 537 DEVPRINTF((sc->dev, "Thread terminating\n")); 538 sc->flags &= ~CBB_KTHREAD_RUNNING; 539 mtx_unlock(&sc->mtx); 540 kproc_exit(0); 541 } 542 543 /************************************************************************/ 544 /* Insert/removal */ 545 /************************************************************************/ 546 547 static void 548 cbb_insert(struct cbb_softc *sc) 549 { 550 uint32_t sockevent, sockstate; 551 552 sockevent = cbb_get(sc, CBB_SOCKET_EVENT); 553 sockstate = cbb_get(sc, CBB_SOCKET_STATE); 554 555 DEVPRINTF((sc->dev, "card inserted: event=0x%08x, state=%08x\n", 556 sockevent, sockstate)); 557 558 if (sockstate & CBB_STATE_R2_CARD) { 559 if (device_is_attached(sc->exca[0].pccarddev)) { 560 sc->flags |= CBB_16BIT_CARD; 561 exca_insert(&sc->exca[0]); 562 } else { 563 device_printf(sc->dev, 564 "16-bit card inserted, but no pccard bus.\n"); 565 } 566 } else if (sockstate & CBB_STATE_CB_CARD) { 567 if (device_is_attached(sc->cbdev)) { 568 sc->flags &= ~CBB_16BIT_CARD; 569 CARD_ATTACH_CARD(sc->cbdev); 570 } else { 571 device_printf(sc->dev, 572 "CardBus card inserted, but no cardbus bus.\n"); 573 } 574 } else { 575 /* 576 * We should power the card down, and try again a couple of 577 * times if this happens. XXX 578 */ 579 device_printf(sc->dev, "Unsupported card type detected\n"); 580 } 581 } 582 583 static void 584 cbb_removal(struct cbb_softc *sc) 585 { 586 sc->cardok = 0; 587 if (sc->flags & CBB_16BIT_CARD) { 588 exca_removal(&sc->exca[0]); 589 } else { 590 if (device_is_attached(sc->cbdev)) 591 CARD_DETACH_CARD(sc->cbdev); 592 } 593 cbb_destroy_res(sc); 594 } 595 596 /************************************************************************/ 597 /* Interrupt Handler */ 598 /************************************************************************/ 599 600 static int 601 cbb_func_filt(void *arg) 602 { 603 struct cbb_intrhand *ih = (struct cbb_intrhand *)arg; 604 struct cbb_softc *sc = ih->sc; 605 606 /* 607 * Make sure that the card is really there. 608 */ 609 if (!sc->cardok) 610 return (FILTER_STRAY); 611 if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) { 612 sc->cardok = 0; 613 return (FILTER_HANDLED); 614 } 615 616 /* 617 * nb: don't have to check for giant or not, since that's done in the 618 * ISR dispatch and one can't hold Giant in a filter anyway... 619 */ 620 return ((*ih->filt)(ih->arg)); 621 } 622 623 static void 624 cbb_func_intr(void *arg) 625 { 626 struct cbb_intrhand *ih = (struct cbb_intrhand *)arg; 627 struct cbb_softc *sc = ih->sc; 628 629 /* 630 * While this check may seem redundant, it helps close a race 631 * condition. If the card is ejected after the filter runs, but 632 * before this ISR can be scheduled, then we need to do the same 633 * filtering to prevent the card's ISR from being called. One could 634 * argue that the card's ISR should be able to cope, but experience 635 * has shown they can't always. This mitigates the problem by making 636 * the race quite a bit smaller. Properly written client ISRs should 637 * cope with the card going away in the middle of the ISR. We assume 638 * that drivers that are sophisticated enough to use filters don't 639 * need our protection. This also allows us to ensure they *ARE* 640 * called if their filter said they needed to be called. 641 */ 642 if (ih->filt == NULL) { 643 if (!sc->cardok) 644 return; 645 if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) { 646 sc->cardok = 0; 647 return; 648 } 649 } 650 651 /* 652 * Call the registered ithread interrupt handler. This entire routine 653 * will be called with Giant if this isn't an MP safe driver, or not 654 * if it is. Either way, we don't have to worry. 655 */ 656 ih->intr(ih->arg); 657 } 658 659 /************************************************************************/ 660 /* Generic Power functions */ 661 /************************************************************************/ 662 663 static uint32_t 664 cbb_detect_voltage(device_t brdev) 665 { 666 struct cbb_softc *sc = device_get_softc(brdev); 667 uint32_t psr; 668 uint32_t vol = CARD_UKN_CARD; 669 670 psr = cbb_get(sc, CBB_SOCKET_STATE); 671 672 if (psr & CBB_STATE_5VCARD && psr & CBB_STATE_5VSOCK) 673 vol |= CARD_5V_CARD; 674 if (psr & CBB_STATE_3VCARD && psr & CBB_STATE_3VSOCK) 675 vol |= CARD_3V_CARD; 676 if (psr & CBB_STATE_XVCARD && psr & CBB_STATE_XVSOCK) 677 vol |= CARD_XV_CARD; 678 if (psr & CBB_STATE_YVCARD && psr & CBB_STATE_YVSOCK) 679 vol |= CARD_YV_CARD; 680 681 return (vol); 682 } 683 684 static uint8_t 685 cbb_o2micro_power_hack(struct cbb_softc *sc) 686 { 687 uint8_t reg; 688 689 /* 690 * Issue #2: INT# not qualified with IRQ Routing Bit. An 691 * unexpected PCI INT# may be generated during PC Card 692 * initialization even with the IRQ Routing Bit Set with some 693 * PC Cards. 694 * 695 * This is a two part issue. The first part is that some of 696 * our older controllers have an issue in which the slot's PCI 697 * INT# is NOT qualified by the IRQ routing bit (PCI reg. 3Eh 698 * bit 7). Regardless of the IRQ routing bit, if NO ISA IRQ 699 * is selected (ExCA register 03h bits 3:0, of the slot, are 700 * cleared) we will generate INT# if IREQ# is asserted. The 701 * second part is because some PC Cards prematurally assert 702 * IREQ# before the ExCA registers are fully programmed. This 703 * in turn asserts INT# because ExCA register 03h bits 3:0 704 * (ISA IRQ Select) are not yet programmed. 705 * 706 * The fix for this issue, which will work for any controller 707 * (old or new), is to set ExCA register 03h bits 3:0 = 0001b 708 * (select IRQ1), of the slot, before turning on slot power. 709 * Selecting IRQ1 will result in INT# NOT being asserted 710 * (because IRQ1 is selected), and IRQ1 won't be asserted 711 * because our controllers don't generate IRQ1. 712 * 713 * Other, non O2Micro controllers will generate irq 1 in some 714 * situations, so we can't do this hack for everybody. Reports of 715 * keyboard controller's interrupts being suppressed occurred when 716 * we did this. 717 */ 718 reg = exca_getb(&sc->exca[0], EXCA_INTR); 719 exca_putb(&sc->exca[0], EXCA_INTR, (reg & 0xf0) | 1); 720 return (reg); 721 } 722 723 /* 724 * Restore the damage that cbb_o2micro_power_hack does to EXCA_INTR so 725 * we don't have an interrupt storm on power on. This has the effect of 726 * disabling card status change interrupts for the duration of poweron. 727 */ 728 static void 729 cbb_o2micro_power_hack2(struct cbb_softc *sc, uint8_t reg) 730 { 731 exca_putb(&sc->exca[0], EXCA_INTR, reg); 732 } 733 734 int 735 cbb_power(device_t brdev, int volts) 736 { 737 uint32_t status, sock_ctrl, reg_ctrl, mask; 738 struct cbb_softc *sc = device_get_softc(brdev); 739 int cnt, sane; 740 int retval = 0; 741 int on = 0; 742 uint8_t reg = 0; 743 744 sock_ctrl = cbb_get(sc, CBB_SOCKET_CONTROL); 745 746 sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK; 747 switch (volts & CARD_VCCMASK) { 748 case 5: 749 sock_ctrl |= CBB_SOCKET_CTRL_VCC_5V; 750 on++; 751 break; 752 case 3: 753 sock_ctrl |= CBB_SOCKET_CTRL_VCC_3V; 754 on++; 755 break; 756 case XV: 757 sock_ctrl |= CBB_SOCKET_CTRL_VCC_XV; 758 on++; 759 break; 760 case YV: 761 sock_ctrl |= CBB_SOCKET_CTRL_VCC_YV; 762 on++; 763 break; 764 case 0: 765 break; 766 default: 767 return (0); /* power NEVER changed */ 768 } 769 770 /* VPP == VCC */ 771 sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK; 772 sock_ctrl |= ((sock_ctrl >> 4) & 0x07); 773 774 if (cbb_get(sc, CBB_SOCKET_CONTROL) == sock_ctrl) 775 return (1); /* no change necessary */ 776 DEVPRINTF((sc->dev, "cbb_power: %dV\n", volts)); 777 if (volts != 0 && sc->chipset == CB_O2MICRO) 778 reg = cbb_o2micro_power_hack(sc); 779 780 /* 781 * We have to mask the card change detect interrupt while we're 782 * messing with the power. It is allowed to bounce while we're 783 * messing with power as things settle down. In addition, we mask off 784 * the card's function interrupt by routing it via the ISA bus. This 785 * bit generally only affects 16-bit cards. Some bridges allow one to 786 * set another bit to have it also affect 32-bit cards. Since 32-bit 787 * cards are required to be better behaved, we don't bother to get 788 * into those bridge specific features. 789 * 790 * XXX I wonder if we need to enable the READY bit interrupt in the 791 * EXCA CSC register for 16-bit cards, and disable the CD bit? 792 */ 793 mask = cbb_get(sc, CBB_SOCKET_MASK); 794 mask |= CBB_SOCKET_MASK_POWER; 795 mask &= ~CBB_SOCKET_MASK_CD; 796 cbb_set(sc, CBB_SOCKET_MASK, mask); 797 PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, 798 |CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2); 799 cbb_set(sc, CBB_SOCKET_CONTROL, sock_ctrl); 800 if (on) { 801 mtx_lock(&sc->mtx); 802 cnt = sc->powerintr; 803 /* 804 * We have a shortish timeout of 500ms here. Some bridges do 805 * not generate a POWER_CYCLE event for 16-bit cards. In 806 * those cases, we have to cope the best we can, and having 807 * only a short delay is better than the alternatives. Others 808 * raise the power cycle a smidge before it is really ready. 809 * We deal with those below. 810 */ 811 sane = 10; 812 while (!(cbb_get(sc, CBB_SOCKET_STATE) & CBB_STATE_POWER_CYCLE) && 813 cnt == sc->powerintr && sane-- > 0) 814 msleep(&sc->powerintr, &sc->mtx, 0, "-", hz / 20); 815 mtx_unlock(&sc->mtx); 816 817 /* 818 * Relax for 100ms. Some bridges appear to assert this signal 819 * right away, but before the card has stabilized. Other 820 * cards need need more time to cope up reliabily. 821 * Experiments with troublesome setups show this to be a 822 * "cheap" way to enhance reliabilty. We need not do this for 823 * "off" since we don't touch the card after we turn it off. 824 */ 825 pause("cbbPwr", min(hz / 10, 1)); 826 827 /* 828 * The TOPIC95B requires a little bit extra time to get its 829 * act together, so delay for an additional 100ms. Also as 830 * documented below, it doesn't seem to set the POWER_CYCLE 831 * bit, so don't whine if it never came on. 832 */ 833 if (sc->chipset == CB_TOPIC95) 834 pause("cbb95B", hz / 10); 835 else if (sane <= 0) 836 device_printf(sc->dev, "power timeout, doom?\n"); 837 } 838 839 /* 840 * After the power is good, we can turn off the power interrupt. 841 * However, the PC Card standard says that we must delay turning the 842 * CD bit back on for a bit to allow for bouncyness on power down 843 * (recall that we don't wait above for a power down, since we don't 844 * get an interrupt for that). We're called either from the suspend 845 * code in which case we don't want to turn card change on again, or 846 * we're called from the card insertion code, in which case the cbb 847 * thread will turn it on for us before it waits to be woken by a 848 * change event. 849 * 850 * NB: Topic95B doesn't set the power cycle bit. we assume that 851 * both it and the TOPIC95 behave the same. 852 */ 853 cbb_clrb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_POWER); 854 status = cbb_get(sc, CBB_SOCKET_STATE); 855 if (on && sc->chipset != CB_TOPIC95) { 856 if ((status & CBB_STATE_POWER_CYCLE) == 0) 857 device_printf(sc->dev, "Power not on?\n"); 858 } 859 if (status & CBB_STATE_BAD_VCC_REQ) { 860 device_printf(sc->dev, "Bad Vcc requested\n"); 861 /* 862 * Turn off the power, and try again. Retrigger other 863 * active interrupts via force register. From NetBSD 864 * PR 36652, coded by me to description there. 865 */ 866 sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK; 867 sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK; 868 cbb_set(sc, CBB_SOCKET_CONTROL, sock_ctrl); 869 status &= ~CBB_STATE_BAD_VCC_REQ; 870 status &= ~CBB_STATE_DATA_LOST; 871 status |= CBB_FORCE_CV_TEST; 872 cbb_set(sc, CBB_SOCKET_FORCE, status); 873 goto done; 874 } 875 if (sc->chipset == CB_TOPIC97) { 876 reg_ctrl = pci_read_config(sc->dev, TOPIC_REG_CTRL, 4); 877 reg_ctrl &= ~TOPIC97_REG_CTRL_TESTMODE; 878 if (on) 879 reg_ctrl |= TOPIC97_REG_CTRL_CLKRUN_ENA; 880 else 881 reg_ctrl &= ~TOPIC97_REG_CTRL_CLKRUN_ENA; 882 pci_write_config(sc->dev, TOPIC_REG_CTRL, reg_ctrl, 4); 883 } 884 PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, 885 & ~CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN, 2); 886 retval = 1; 887 done:; 888 if (volts != 0 && sc->chipset == CB_O2MICRO) 889 cbb_o2micro_power_hack2(sc, reg); 890 return (retval); 891 } 892 893 static int 894 cbb_current_voltage(device_t brdev) 895 { 896 struct cbb_softc *sc = device_get_softc(brdev); 897 uint32_t ctrl; 898 899 ctrl = cbb_get(sc, CBB_SOCKET_CONTROL); 900 switch (ctrl & CBB_SOCKET_CTRL_VCCMASK) { 901 case CBB_SOCKET_CTRL_VCC_5V: 902 return CARD_5V_CARD; 903 case CBB_SOCKET_CTRL_VCC_3V: 904 return CARD_3V_CARD; 905 case CBB_SOCKET_CTRL_VCC_XV: 906 return CARD_XV_CARD; 907 case CBB_SOCKET_CTRL_VCC_YV: 908 return CARD_YV_CARD; 909 } 910 return 0; 911 } 912 913 /* 914 * detect the voltage for the card, and set it. Since the power 915 * used is the square of the voltage, lower voltages is a big win 916 * and what Windows does (and what Microsoft prefers). The MS paper 917 * also talks about preferring the CIS entry as well, but that has 918 * to be done elsewhere. We also optimize power sequencing here 919 * and don't change things if we're already powered up at a supported 920 * voltage. 921 * 922 * In addition, we power up with OE disabled. We'll set it later 923 * in the power up sequence. 924 */ 925 static int 926 cbb_do_power(device_t brdev) 927 { 928 struct cbb_softc *sc = device_get_softc(brdev); 929 uint32_t voltage, curpwr; 930 uint32_t status; 931 932 /* Don't enable OE (output enable) until power stable */ 933 exca_clrb(&sc->exca[0], EXCA_PWRCTL, EXCA_PWRCTL_OE); 934 935 voltage = cbb_detect_voltage(brdev); 936 curpwr = cbb_current_voltage(brdev); 937 status = cbb_get(sc, CBB_SOCKET_STATE); 938 if ((status & CBB_STATE_POWER_CYCLE) && (voltage & curpwr)) 939 return 0; 940 /* Prefer lowest voltage supported */ 941 cbb_power(brdev, CARD_OFF); 942 if (voltage & CARD_YV_CARD) 943 cbb_power(brdev, CARD_VCC(YV)); 944 else if (voltage & CARD_XV_CARD) 945 cbb_power(brdev, CARD_VCC(XV)); 946 else if (voltage & CARD_3V_CARD) 947 cbb_power(brdev, CARD_VCC(3)); 948 else if (voltage & CARD_5V_CARD) 949 cbb_power(brdev, CARD_VCC(5)); 950 else { 951 device_printf(brdev, "Unknown card voltage\n"); 952 return (ENXIO); 953 } 954 return (0); 955 } 956 957 /************************************************************************/ 958 /* CardBus power functions */ 959 /************************************************************************/ 960 961 static int 962 cbb_cardbus_reset_power(device_t brdev, device_t child, int on) 963 { 964 struct cbb_softc *sc = device_get_softc(brdev); 965 uint32_t b, h; 966 int delay, count, zero_seen, func; 967 968 /* 969 * Asserting reset for 20ms is necessary for most bridges. For some 970 * reason, the Ricoh RF5C47x bridges need it asserted for 400ms. The 971 * root cause of this is unknown, and NetBSD does the same thing. 972 */ 973 delay = sc->chipset == CB_RF5C47X ? 400 : 20; 974 PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2); 975 pause("cbbP3", hz * delay / 1000); 976 977 /* 978 * If a card exists and we're turning it on, take it out of reset. 979 * After clearing reset, wait up to 1.1s for the first configuration 980 * register (vendor/product) configuration register of device 0.0 to 981 * become != 0xffffffff. The PCMCIA PC Card Host System Specification 982 * says that when powering up the card, the PCI Spec v2.1 must be 983 * followed. In PCI spec v2.2 Table 4-6, Trhfa (Reset High to first 984 * Config Access) is at most 2^25 clocks, or just over 1s. Section 985 * 2.2.1 states any card not ready to participate in bus transactions 986 * must tristate its outputs. Therefore, any access to its 987 * configuration registers must be ignored. In that state, the config 988 * reg will read 0xffffffff. Section 6.2.1 states a vendor id of 989 * 0xffff is invalid, so this can never match a real card. Print a 990 * warning if it never returns a real id. The PCMCIA PC Card 991 * Electrical Spec Section 5.2.7.1 implies only device 0 is present on 992 * a cardbus bus, so that's the only register we check here. 993 */ 994 if (on && CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) { 995 PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, 996 &~CBBM_BRIDGECTRL_RESET, 2); 997 b = pcib_get_bus(child); 998 count = 1100 / 20; 999 do { 1000 pause("cbbP4", hz * 2 / 100); 1001 } while (PCIB_READ_CONFIG(brdev, b, 0, 0, PCIR_DEVVENDOR, 4) == 1002 0xfffffffful && --count >= 0); 1003 if (count < 0) 1004 device_printf(brdev, "Warning: Bus reset timeout\n"); 1005 1006 /* 1007 * Some cards (so far just an atheros card I have) seem to 1008 * come out of reset in a funky state. They report they are 1009 * multi-function cards, but have nonsense for some of the 1010 * higher functions. So if the card claims to be MFDEV, and 1011 * any of the higher functions' ID is 0, then we've hit the 1012 * bug and we'll try again. 1013 */ 1014 h = PCIB_READ_CONFIG(brdev, b, 0, 0, PCIR_HDRTYPE, 1); 1015 if ((h & PCIM_MFDEV) == 0) 1016 return 0; 1017 zero_seen = 0; 1018 for (func = 1; func < 8; func++) { 1019 h = PCIB_READ_CONFIG(brdev, b, 0, func, 1020 PCIR_DEVVENDOR, 4); 1021 if (h == 0) 1022 zero_seen++; 1023 } 1024 if (!zero_seen) 1025 return 0; 1026 return (EINVAL); 1027 } 1028 return 0; 1029 } 1030 1031 static int 1032 cbb_cardbus_power_disable_socket(device_t brdev, device_t child) 1033 { 1034 cbb_power(brdev, CARD_OFF); 1035 cbb_cardbus_reset_power(brdev, child, 0); 1036 return (0); 1037 } 1038 1039 static int 1040 cbb_cardbus_power_enable_socket(device_t brdev, device_t child) 1041 { 1042 struct cbb_softc *sc = device_get_softc(brdev); 1043 int err, count; 1044 1045 if (!CBB_CARD_PRESENT(cbb_get(sc, CBB_SOCKET_STATE))) 1046 return (ENODEV); 1047 1048 count = 10; 1049 do { 1050 err = cbb_do_power(brdev); 1051 if (err) 1052 return (err); 1053 err = cbb_cardbus_reset_power(brdev, child, 1); 1054 if (err) { 1055 device_printf(brdev, "Reset failed, trying again.\n"); 1056 cbb_cardbus_power_disable_socket(brdev, child); 1057 pause("cbbErr1", hz / 10); /* wait 100ms */ 1058 } 1059 } while (err != 0 && count-- > 0); 1060 return (0); 1061 } 1062 1063 /************************************************************************/ 1064 /* CardBus Resource */ 1065 /************************************************************************/ 1066 1067 static void 1068 cbb_activate_window(device_t brdev, int type) 1069 { 1070 1071 PCI_ENABLE_IO(device_get_parent(brdev), brdev, type); 1072 } 1073 1074 static int 1075 cbb_cardbus_io_open(device_t brdev, int win, uint32_t start, uint32_t end) 1076 { 1077 int basereg; 1078 int limitreg; 1079 1080 if ((win < 0) || (win > 1)) { 1081 DEVPRINTF((brdev, 1082 "cbb_cardbus_io_open: window out of range %d\n", win)); 1083 return (EINVAL); 1084 } 1085 1086 basereg = win * 8 + CBBR_IOBASE0; 1087 limitreg = win * 8 + CBBR_IOLIMIT0; 1088 1089 pci_write_config(brdev, basereg, start, 4); 1090 pci_write_config(brdev, limitreg, end, 4); 1091 cbb_activate_window(brdev, SYS_RES_IOPORT); 1092 return (0); 1093 } 1094 1095 static int 1096 cbb_cardbus_mem_open(device_t brdev, int win, uint32_t start, uint32_t end) 1097 { 1098 int basereg; 1099 int limitreg; 1100 1101 if ((win < 0) || (win > 1)) { 1102 DEVPRINTF((brdev, 1103 "cbb_cardbus_mem_open: window out of range %d\n", win)); 1104 return (EINVAL); 1105 } 1106 1107 basereg = win * 8 + CBBR_MEMBASE0; 1108 limitreg = win * 8 + CBBR_MEMLIMIT0; 1109 1110 pci_write_config(brdev, basereg, start, 4); 1111 pci_write_config(brdev, limitreg, end, 4); 1112 cbb_activate_window(brdev, SYS_RES_MEMORY); 1113 return (0); 1114 } 1115 1116 #define START_NONE 0xffffffff 1117 #define END_NONE 0 1118 1119 static void 1120 cbb_cardbus_auto_open(struct cbb_softc *sc, int type) 1121 { 1122 uint32_t starts[2]; 1123 uint32_t ends[2]; 1124 struct cbb_reslist *rle; 1125 int align, i; 1126 uint32_t reg; 1127 1128 starts[0] = starts[1] = START_NONE; 1129 ends[0] = ends[1] = END_NONE; 1130 1131 if (type == SYS_RES_MEMORY) 1132 align = CBB_MEMALIGN; 1133 else if (type == SYS_RES_IOPORT) 1134 align = CBB_IOALIGN; 1135 else 1136 align = 1; 1137 1138 SLIST_FOREACH(rle, &sc->rl, link) { 1139 if (rle->type != type) 1140 continue; 1141 if (rle->res == NULL) 1142 continue; 1143 if (!(rman_get_flags(rle->res) & RF_ACTIVE)) 1144 continue; 1145 if (rman_get_flags(rle->res) & RF_PREFETCHABLE) 1146 i = 1; 1147 else 1148 i = 0; 1149 if (rman_get_start(rle->res) < starts[i]) 1150 starts[i] = rman_get_start(rle->res); 1151 if (rman_get_end(rle->res) > ends[i]) 1152 ends[i] = rman_get_end(rle->res); 1153 } 1154 for (i = 0; i < 2; i++) { 1155 if (starts[i] == START_NONE) 1156 continue; 1157 starts[i] &= ~(align - 1); 1158 ends[i] = roundup2(ends[i], align) - 1; 1159 } 1160 if (starts[0] != START_NONE && starts[1] != START_NONE) { 1161 if (starts[0] < starts[1]) { 1162 if (ends[0] > starts[1]) { 1163 device_printf(sc->dev, "Overlapping ranges" 1164 " for prefetch and non-prefetch memory\n"); 1165 return; 1166 } 1167 } else { 1168 if (ends[1] > starts[0]) { 1169 device_printf(sc->dev, "Overlapping ranges" 1170 " for prefetch and non-prefetch memory\n"); 1171 return; 1172 } 1173 } 1174 } 1175 1176 if (type == SYS_RES_MEMORY) { 1177 cbb_cardbus_mem_open(sc->dev, 0, starts[0], ends[0]); 1178 cbb_cardbus_mem_open(sc->dev, 1, starts[1], ends[1]); 1179 reg = pci_read_config(sc->dev, CBBR_BRIDGECTRL, 2); 1180 reg &= ~(CBBM_BRIDGECTRL_PREFETCH_0 | 1181 CBBM_BRIDGECTRL_PREFETCH_1); 1182 if (starts[1] != START_NONE) 1183 reg |= CBBM_BRIDGECTRL_PREFETCH_1; 1184 pci_write_config(sc->dev, CBBR_BRIDGECTRL, reg, 2); 1185 if (bootverbose) { 1186 device_printf(sc->dev, "Opening memory:\n"); 1187 if (starts[0] != START_NONE) 1188 device_printf(sc->dev, "Normal: %#x-%#x\n", 1189 starts[0], ends[0]); 1190 if (starts[1] != START_NONE) 1191 device_printf(sc->dev, "Prefetch: %#x-%#x\n", 1192 starts[1], ends[1]); 1193 } 1194 } else if (type == SYS_RES_IOPORT) { 1195 cbb_cardbus_io_open(sc->dev, 0, starts[0], ends[0]); 1196 cbb_cardbus_io_open(sc->dev, 1, starts[1], ends[1]); 1197 if (bootverbose && starts[0] != START_NONE) 1198 device_printf(sc->dev, "Opening I/O: %#x-%#x\n", 1199 starts[0], ends[0]); 1200 } 1201 } 1202 1203 static int 1204 cbb_cardbus_activate_resource(device_t brdev, device_t child, int type, 1205 int rid, struct resource *res) 1206 { 1207 int ret; 1208 1209 ret = BUS_ACTIVATE_RESOURCE(device_get_parent(brdev), child, 1210 type, rid, res); 1211 if (ret != 0) 1212 return (ret); 1213 cbb_cardbus_auto_open(device_get_softc(brdev), type); 1214 return (0); 1215 } 1216 1217 static int 1218 cbb_cardbus_deactivate_resource(device_t brdev, device_t child, int type, 1219 int rid, struct resource *res) 1220 { 1221 int ret; 1222 1223 ret = BUS_DEACTIVATE_RESOURCE(device_get_parent(brdev), child, 1224 type, rid, res); 1225 if (ret != 0) 1226 return (ret); 1227 cbb_cardbus_auto_open(device_get_softc(brdev), type); 1228 return (0); 1229 } 1230 1231 static struct resource * 1232 cbb_cardbus_alloc_resource(device_t brdev, device_t child, int type, 1233 int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1234 { 1235 struct cbb_softc *sc = device_get_softc(brdev); 1236 int tmp; 1237 struct resource *res; 1238 rman_res_t align; 1239 1240 switch (type) { 1241 case SYS_RES_IRQ: 1242 tmp = rman_get_start(sc->irq_res); 1243 if (start > tmp || end < tmp || count != 1) { 1244 device_printf(child, "requested interrupt %jd-%jd," 1245 "count = %jd not supported by cbb\n", 1246 start, end, count); 1247 return (NULL); 1248 } 1249 start = end = tmp; 1250 flags |= RF_SHAREABLE; 1251 break; 1252 case SYS_RES_IOPORT: 1253 if (start <= cbb_start_32_io) 1254 start = cbb_start_32_io; 1255 if (end < start) 1256 end = start; 1257 if (count > (1 << RF_ALIGNMENT(flags))) 1258 flags = (flags & ~RF_ALIGNMENT_MASK) | 1259 rman_make_alignment_flags(count); 1260 break; 1261 case SYS_RES_MEMORY: 1262 if (start <= cbb_start_mem) 1263 start = cbb_start_mem; 1264 if (end < start) 1265 end = start; 1266 if (count < CBB_MEMALIGN) 1267 align = CBB_MEMALIGN; 1268 else 1269 align = count; 1270 if (align > (1 << RF_ALIGNMENT(flags))) 1271 flags = (flags & ~RF_ALIGNMENT_MASK) | 1272 rman_make_alignment_flags(align); 1273 break; 1274 } 1275 res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid, 1276 start, end, count, flags & ~RF_ACTIVE); 1277 if (res == NULL) { 1278 printf("cbb alloc res fail type %d rid %x\n", type, *rid); 1279 return (NULL); 1280 } 1281 cbb_insert_res(sc, res, type, *rid); 1282 if (flags & RF_ACTIVE) 1283 if (bus_activate_resource(child, type, *rid, res) != 0) { 1284 bus_release_resource(child, type, *rid, res); 1285 return (NULL); 1286 } 1287 1288 return (res); 1289 } 1290 1291 static int 1292 cbb_cardbus_release_resource(device_t brdev, device_t child, int type, 1293 int rid, struct resource *res) 1294 { 1295 struct cbb_softc *sc = device_get_softc(brdev); 1296 int error; 1297 1298 if (rman_get_flags(res) & RF_ACTIVE) { 1299 error = bus_deactivate_resource(child, type, rid, res); 1300 if (error != 0) 1301 return (error); 1302 } 1303 cbb_remove_res(sc, res); 1304 return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child, 1305 type, rid, res)); 1306 } 1307 1308 /************************************************************************/ 1309 /* PC Card Power Functions */ 1310 /************************************************************************/ 1311 1312 static int 1313 cbb_pcic_power_enable_socket(device_t brdev, device_t child) 1314 { 1315 struct cbb_softc *sc = device_get_softc(brdev); 1316 int err; 1317 1318 DPRINTF(("cbb_pcic_socket_enable:\n")); 1319 1320 /* power down/up the socket to reset */ 1321 err = cbb_do_power(brdev); 1322 if (err) 1323 return (err); 1324 exca_reset(&sc->exca[0], child); 1325 1326 return (0); 1327 } 1328 1329 static int 1330 cbb_pcic_power_disable_socket(device_t brdev, device_t child) 1331 { 1332 struct cbb_softc *sc = device_get_softc(brdev); 1333 1334 DPRINTF(("cbb_pcic_socket_disable\n")); 1335 1336 /* Turn off the card's interrupt and leave it in reset, wait 10ms */ 1337 exca_putb(&sc->exca[0], EXCA_INTR, 0); 1338 pause("cbbP1", hz / 100); 1339 1340 /* power down the socket */ 1341 cbb_power(brdev, CARD_OFF); 1342 exca_putb(&sc->exca[0], EXCA_PWRCTL, 0); 1343 1344 /* wait 300ms until power fails (Tpf). */ 1345 pause("cbbP2", hz * 300 / 1000); 1346 1347 /* enable CSC interrupts */ 1348 exca_putb(&sc->exca[0], EXCA_INTR, EXCA_INTR_ENABLE); 1349 return (0); 1350 } 1351 1352 /************************************************************************/ 1353 /* POWER methods */ 1354 /************************************************************************/ 1355 1356 int 1357 cbb_power_enable_socket(device_t brdev, device_t child) 1358 { 1359 struct cbb_softc *sc = device_get_softc(brdev); 1360 1361 if (sc->flags & CBB_16BIT_CARD) 1362 return (cbb_pcic_power_enable_socket(brdev, child)); 1363 return (cbb_cardbus_power_enable_socket(brdev, child)); 1364 } 1365 1366 int 1367 cbb_power_disable_socket(device_t brdev, device_t child) 1368 { 1369 struct cbb_softc *sc = device_get_softc(brdev); 1370 if (sc->flags & CBB_16BIT_CARD) 1371 return (cbb_pcic_power_disable_socket(brdev, child)); 1372 return (cbb_cardbus_power_disable_socket(brdev, child)); 1373 } 1374 1375 static int 1376 cbb_pcic_activate_resource(device_t brdev, device_t child, int type, int rid, 1377 struct resource *res) 1378 { 1379 struct cbb_softc *sc = device_get_softc(brdev); 1380 int error; 1381 1382 error = exca_activate_resource(&sc->exca[0], child, type, rid, res); 1383 if (error == 0) 1384 cbb_activate_window(brdev, type); 1385 return (error); 1386 } 1387 1388 static int 1389 cbb_pcic_deactivate_resource(device_t brdev, device_t child, int type, 1390 int rid, struct resource *res) 1391 { 1392 struct cbb_softc *sc = device_get_softc(brdev); 1393 return (exca_deactivate_resource(&sc->exca[0], child, type, rid, res)); 1394 } 1395 1396 static struct resource * 1397 cbb_pcic_alloc_resource(device_t brdev, device_t child, int type, int *rid, 1398 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1399 { 1400 struct resource *res = NULL; 1401 struct cbb_softc *sc = device_get_softc(brdev); 1402 int align; 1403 int tmp; 1404 1405 switch (type) { 1406 case SYS_RES_MEMORY: 1407 if (start < cbb_start_mem) 1408 start = cbb_start_mem; 1409 if (end < start) 1410 end = start; 1411 if (count < CBB_MEMALIGN) 1412 align = CBB_MEMALIGN; 1413 else 1414 align = count; 1415 if (align > (1 << RF_ALIGNMENT(flags))) 1416 flags = (flags & ~RF_ALIGNMENT_MASK) | 1417 rman_make_alignment_flags(align); 1418 break; 1419 case SYS_RES_IOPORT: 1420 if (start < cbb_start_16_io) 1421 start = cbb_start_16_io; 1422 if (end < start) 1423 end = start; 1424 break; 1425 case SYS_RES_IRQ: 1426 tmp = rman_get_start(sc->irq_res); 1427 if (start > tmp || end < tmp || count != 1) { 1428 device_printf(child, "requested interrupt %jd-%jd," 1429 "count = %jd not supported by cbb\n", 1430 start, end, count); 1431 return (NULL); 1432 } 1433 flags |= RF_SHAREABLE; 1434 start = end = rman_get_start(sc->irq_res); 1435 break; 1436 } 1437 res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid, 1438 start, end, count, flags & ~RF_ACTIVE); 1439 if (res == NULL) 1440 return (NULL); 1441 cbb_insert_res(sc, res, type, *rid); 1442 if (flags & RF_ACTIVE) { 1443 if (bus_activate_resource(child, type, *rid, res) != 0) { 1444 bus_release_resource(child, type, *rid, res); 1445 return (NULL); 1446 } 1447 } 1448 1449 return (res); 1450 } 1451 1452 static int 1453 cbb_pcic_release_resource(device_t brdev, device_t child, int type, 1454 int rid, struct resource *res) 1455 { 1456 struct cbb_softc *sc = device_get_softc(brdev); 1457 int error; 1458 1459 if (rman_get_flags(res) & RF_ACTIVE) { 1460 error = bus_deactivate_resource(child, type, rid, res); 1461 if (error != 0) 1462 return (error); 1463 } 1464 cbb_remove_res(sc, res); 1465 return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child, 1466 type, rid, res)); 1467 } 1468 1469 /************************************************************************/ 1470 /* PC Card methods */ 1471 /************************************************************************/ 1472 1473 int 1474 cbb_pcic_set_res_flags(device_t brdev, device_t child, int type, int rid, 1475 u_long flags) 1476 { 1477 struct cbb_softc *sc = device_get_softc(brdev); 1478 struct resource *res; 1479 1480 if (type != SYS_RES_MEMORY) 1481 return (EINVAL); 1482 res = cbb_find_res(sc, type, rid); 1483 if (res == NULL) { 1484 device_printf(brdev, 1485 "set_res_flags: specified rid not found\n"); 1486 return (ENOENT); 1487 } 1488 return (exca_mem_set_flags(&sc->exca[0], res, flags)); 1489 } 1490 1491 int 1492 cbb_pcic_set_memory_offset(device_t brdev, device_t child, int rid, 1493 uint32_t cardaddr, uint32_t *deltap) 1494 { 1495 struct cbb_softc *sc = device_get_softc(brdev); 1496 struct resource *res; 1497 1498 res = cbb_find_res(sc, SYS_RES_MEMORY, rid); 1499 if (res == NULL) { 1500 device_printf(brdev, 1501 "set_memory_offset: specified rid not found\n"); 1502 return (ENOENT); 1503 } 1504 return (exca_mem_set_offset(&sc->exca[0], res, cardaddr, deltap)); 1505 } 1506 1507 /************************************************************************/ 1508 /* BUS Methods */ 1509 /************************************************************************/ 1510 1511 1512 int 1513 cbb_activate_resource(device_t brdev, device_t child, int type, int rid, 1514 struct resource *r) 1515 { 1516 struct cbb_softc *sc = device_get_softc(brdev); 1517 1518 if (sc->flags & CBB_16BIT_CARD) 1519 return (cbb_pcic_activate_resource(brdev, child, type, rid, r)); 1520 else 1521 return (cbb_cardbus_activate_resource(brdev, child, type, rid, 1522 r)); 1523 } 1524 1525 int 1526 cbb_deactivate_resource(device_t brdev, device_t child, int type, 1527 int rid, struct resource *r) 1528 { 1529 struct cbb_softc *sc = device_get_softc(brdev); 1530 1531 if (sc->flags & CBB_16BIT_CARD) 1532 return (cbb_pcic_deactivate_resource(brdev, child, type, 1533 rid, r)); 1534 else 1535 return (cbb_cardbus_deactivate_resource(brdev, child, type, 1536 rid, r)); 1537 } 1538 1539 struct resource * 1540 cbb_alloc_resource(device_t brdev, device_t child, int type, int *rid, 1541 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 1542 { 1543 struct cbb_softc *sc = device_get_softc(brdev); 1544 1545 if (sc->flags & CBB_16BIT_CARD) 1546 return (cbb_pcic_alloc_resource(brdev, child, type, rid, 1547 start, end, count, flags)); 1548 else 1549 return (cbb_cardbus_alloc_resource(brdev, child, type, rid, 1550 start, end, count, flags)); 1551 } 1552 1553 int 1554 cbb_release_resource(device_t brdev, device_t child, int type, int rid, 1555 struct resource *r) 1556 { 1557 struct cbb_softc *sc = device_get_softc(brdev); 1558 1559 if (sc->flags & CBB_16BIT_CARD) 1560 return (cbb_pcic_release_resource(brdev, child, type, 1561 rid, r)); 1562 else 1563 return (cbb_cardbus_release_resource(brdev, child, type, 1564 rid, r)); 1565 } 1566 1567 int 1568 cbb_read_ivar(device_t brdev, device_t child, int which, uintptr_t *result) 1569 { 1570 struct cbb_softc *sc = device_get_softc(brdev); 1571 1572 switch (which) { 1573 case PCIB_IVAR_DOMAIN: 1574 *result = sc->domain; 1575 return (0); 1576 case PCIB_IVAR_BUS: 1577 *result = sc->bus.sec; 1578 return (0); 1579 } 1580 return (ENOENT); 1581 } 1582 1583 int 1584 cbb_write_ivar(device_t brdev, device_t child, int which, uintptr_t value) 1585 { 1586 1587 switch (which) { 1588 case PCIB_IVAR_DOMAIN: 1589 return (EINVAL); 1590 case PCIB_IVAR_BUS: 1591 return (EINVAL); 1592 } 1593 return (ENOENT); 1594 } 1595 1596 int 1597 cbb_child_present(device_t parent, device_t child) 1598 { 1599 struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(parent); 1600 uint32_t sockstate; 1601 1602 sockstate = cbb_get(sc, CBB_SOCKET_STATE); 1603 return (CBB_CARD_PRESENT(sockstate) && sc->cardok); 1604 } 1605