xref: /freebsd/sys/dev/ocs_fc/ocs_common.h (revision 924226fba12cc9a228c73b956e1b7fa24c60b055)
1 /*-
2  * Copyright (c) 2017 Broadcom. All rights reserved.
3  * The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright notice,
9  *    this list of conditions and the following disclaimer.
10  *
11  * 2. Redistributions in binary form must reproduce the above copyright notice,
12  *    this list of conditions and the following disclaimer in the documentation
13  *    and/or other materials provided with the distribution.
14  *
15  * 3. Neither the name of the copyright holder nor the names of its contributors
16  *    may be used to endorse or promote products derived from this software
17  *    without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
23  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  *
31  * $FreeBSD$
32  */
33 
34 /**
35  * @file
36  * Contains declarations shared between the alex layer and HW/SLI4
37  */
38 
39 #if !defined(__OCS_COMMON_H__)
40 #define __OCS_COMMON_H__
41 
42 #include "ocs_sm.h"
43 #include "ocs_utils.h"
44 
45 #define OCS_CTRLMASK_XPORT_DISABLE_AUTORSP_TSEND	(1U << 0)
46 #define OCS_CTRLMASK_XPORT_DISABLE_AUTORSP_TRECEIVE	(1U << 1)
47 #define OCS_CTRLMASK_XPORT_ENABLE_TARGET_RSCN		(1U << 3)
48 #define OCS_CTRLMASK_TGT_ALWAYS_VERIFY_DIF		(1U << 4)
49 #define OCS_CTRLMASK_TGT_SET_DIF_REF_TAG_CRC		(1U << 5)
50 #define OCS_CTRLMASK_TEST_CHAINED_SGLS			(1U << 6)
51 #define OCS_CTRLMASK_ISCSI_ISNS_ENABLE			(1U << 7)
52 #define OCS_CTRLMASK_ENABLE_FABRIC_EMULATION		(1U << 8)
53 #define OCS_CTRLMASK_INHIBIT_INITIATOR			(1U << 9)
54 #define OCS_CTRLMASK_CRASH_RESET			(1U << 10)
55 
56 #define enable_target_rscn(ocs) \
57 	((ocs->ctrlmask & OCS_CTRLMASK_XPORT_ENABLE_TARGET_RSCN) != 0)
58 
59 /* Used for error injection testing. */
60 typedef enum {
61 	NO_ERR_INJECT = 0,
62 	INJECT_DROP_CMD,
63 	INJECT_FREE_DROPPED,
64 	INJECT_DROP_DATA,
65 	INJECT_DROP_RESP,
66 	INJECT_DELAY_CMD,
67 } ocs_err_injection_e;
68 
69 #define MAX_OCS_DEVICES                 64
70 
71 typedef enum {OCS_XPORT_FC, OCS_XPORT_ISCSI} ocs_xport_e;
72 
73 #define OCS_SERVICE_PARMS_LENGTH		0x74
74 #define OCS_DISPLAY_NAME_LENGTH			32
75 #define OCS_DISPLAY_BUS_INFO_LENGTH		16
76 
77 #define OCS_WWN_LENGTH				32
78 
79 typedef struct ocs_hw_s ocs_hw_t;
80 typedef struct ocs_domain_s ocs_domain_t;
81 typedef struct ocs_sli_port_s ocs_sli_port_t;
82 typedef struct ocs_sli_port_s ocs_sport_t;
83 typedef struct ocs_remote_node_s ocs_remote_node_t;
84 typedef struct ocs_remote_node_group_s ocs_remote_node_group_t;
85 typedef struct ocs_node_s ocs_node_t;
86 typedef struct ocs_io_s ocs_io_t;
87 typedef struct ocs_xport_s ocs_xport_t;
88 typedef struct ocs_node_cb_s ocs_node_cb_t;
89 typedef struct ocs_ns_s ocs_ns_t;
90 
91 /* Node group data structure */
92 typedef struct ocs_node_group_dir_s ocs_node_group_dir_t;
93 
94 #include "ocs_cam.h"
95 
96 /*--------------------------------------------------
97  * Shared HW/SLI objects
98  *
99  * Several objects used by the HW/SLI layers are communal; part of the
100  * object is for the sole use of the lower layers, but implementations
101  * are free to add their own fields if desired.
102  */
103 
104 /**
105  * @brief Description of discovered Fabric Domain
106  *
107  * @note Not all fields are valid for all mediums (FC/ethernet).
108  */
109 typedef struct ocs_domain_record_s {
110 	uint32_t	index;		/**< FCF table index (used in REG_FCFI) */
111 	uint32_t	priority;	/**< FCF reported priority */
112 	uint8_t		address[6];	/**< Switch MAC/FC address */
113 	uint8_t		wwn[8];		/**< Switch WWN */
114 	union {
115 		uint8_t	vlan[512];	/**< bitmap of valid VLAN IDs */
116 		uint8_t	loop[128];	/**< FC-AL position map */
117 	} map;
118 	uint32_t	speed;		/**< link speed */
119 	uint32_t	fc_id;		/**< our ports fc_id */
120 	uint32_t	is_fc:1,	/**< Connection medium is native FC */
121 			is_ethernet:1,	/**< Connection medium is ethernet (FCoE) */
122 			is_loop:1,	/**< Topology is FC-AL */
123 			is_nport:1,	/**< Topology is N-PORT */
124 			:28;
125 } ocs_domain_record_t;
126 
127 /**
128  * @brief Node group directory entry
129  */
130 struct ocs_node_group_dir_s {
131 	uint32_t instance_index;		/*<< instance index */
132 	ocs_sport_t *sport;			/*<< pointer to sport */
133 	uint8_t service_params[OCS_SERVICE_PARMS_LENGTH];	/**< Login parameters */
134 	ocs_list_link_t link;			/**< linked list link */
135 	ocs_list_t node_group_list;		/**< linked list of node groups */
136 	uint32_t node_group_list_count;		/**< current number of elements on the node group list */
137 	uint32_t next_idx;			/*<< index of the next node group in list */
138 };
139 
140 typedef enum {
141 	OCS_SPORT_TOPOLOGY_UNKNOWN=0,
142 	OCS_SPORT_TOPOLOGY_FABRIC,
143 	OCS_SPORT_TOPOLOGY_P2P,
144 	OCS_SPORT_TOPOLOGY_LOOP,
145 } ocs_sport_topology_e;
146 
147 /**
148  * @brief SLI Port object
149  *
150  * The SLI Port object represents the connection between the driver and the
151  * FC/FCoE domain. In some topologies / hardware, it is possible to have
152  * multiple connections to the domain via different WWN. Each would require
153  * a separate SLI port object.
154  */
155 struct ocs_sli_port_s {
156 	ocs_t *ocs;				/**< pointer to ocs */
157 	uint32_t tgt_id;			/**< target id */
158 	uint32_t index;				/**< ??? */
159 	uint32_t instance_index;
160 	char display_name[OCS_DISPLAY_NAME_LENGTH]; /**< sport display name */
161 	ocs_domain_t *domain;			/**< current fabric domain */
162 	uint32_t	is_vport:1;		/**< this SPORT is a virtual port */
163 	uint64_t	wwpn;			/**< WWPN from HW (host endian) */
164 	uint64_t	wwnn;			/**< WWNN from HW (host endian) */
165 	ocs_list_t node_list;			/**< list of nodes */
166 	ocs_scsi_ini_sport_t ini_sport;		/**< initiator backend private sport data */
167 	ocs_scsi_tgt_sport_t tgt_sport;		/**< target backend private sport data */
168 	void	*tgt_data;			/**< target backend private pointer */
169 	void	*ini_data;			/**< initiator backend private pointer */
170 	ocs_mgmt_functions_t *mgmt_functions;
171 
172 	/*
173 	 * Members private to HW/SLI
174 	 */
175 	ocs_sm_ctx_t	ctx;		/**< state machine context */
176 	ocs_hw_t	*hw;		/**< pointer to HW */
177 	uint32_t	indicator;	/**< VPI */
178 	uint32_t	fc_id;		/**< FC address */
179 	ocs_dma_t	dma;		/**< memory for Service Parameters */
180 
181 	uint8_t		wwnn_str[OCS_WWN_LENGTH];	/**< WWN (ASCII) */
182 	uint64_t	sli_wwpn;	/**< WWPN (wire endian) */
183 	uint64_t	sli_wwnn;	/**< WWNN (wire endian) */
184 	uint32_t	sm_free_req_pending:1;	/**< Free request received while waiting for attach response */
185 
186 	/*
187 	 * Implementation specific fields allowed here
188 	 */
189 	ocs_sm_ctx_t	sm;			/**< sport context state machine */
190 	sparse_vector_t lookup;			/**< fc_id to node lookup object */
191 	ocs_list_link_t link;
192 	uint32_t	enable_ini:1,		/**< SCSI initiator enabled for this node */
193 			enable_tgt:1,		/**< SCSI target enabled for this node */
194 			enable_rscn:1,		/**< This SPORT will be expecting RSCN */
195 			shutting_down:1,	/**< sport in process of shutting down */
196 			p2p_winner:1;		/**< TRUE if we're the point-to-point winner */
197 	ocs_sport_topology_e topology;		/**< topology: fabric/p2p/unknown */
198 	uint8_t		service_params[OCS_SERVICE_PARMS_LENGTH]; /**< Login parameters */
199 	uint32_t	p2p_remote_port_id;	/**< Remote node's port id for p2p */
200 	uint32_t	p2p_port_id;		/**< our port's id */
201 
202 	/* List of remote node group directory entries (used by high login mode) */
203 	ocs_lock_t	node_group_lock;
204 	uint32_t	node_group_dir_next_instance; /**< HLM next node group directory instance value */
205 	uint32_t	node_group_next_instance; /**< HLM next node group instance value */
206 	ocs_list_t	node_group_dir_list;
207 };
208 
209 /**
210  * @brief Fibre Channel domain object
211  *
212  * This object is a container for the various SLI components needed
213  * to connect to the domain of a FC or FCoE switch
214  */
215 struct ocs_domain_s {
216 	ocs_t *ocs;				/**< pointer back to ocs */
217 	uint32_t instance_index;		/**< unique instance index value */
218 	char display_name[OCS_DISPLAY_NAME_LENGTH]; /**< Node display name */
219 	ocs_list_t sport_list;			/**< linked list of SLI ports */
220 	ocs_scsi_ini_domain_t ini_domain;	/**< initiator backend private domain data */
221 	ocs_scsi_tgt_domain_t tgt_domain;	/**< target backend private domain data */
222 	ocs_mgmt_functions_t *mgmt_functions;
223 
224 	/* Declarations private to HW/SLI */
225 	ocs_hw_t	*hw;		/**< pointer to HW */
226 	ocs_sm_ctx_t	sm;		/**< state machine context */
227 	uint32_t	fcf;		/**< FC Forwarder table index */
228 	uint32_t	fcf_indicator;	/**< FCFI */
229 	uint32_t	vlan_id;	/**< VLAN tag for this domain */
230 	uint32_t	indicator;	/**< VFI */
231 	ocs_dma_t	dma;		/**< memory for Service Parameters */
232 	uint32_t	req_rediscover_fcf:1;	/**< TRUE if fcf rediscover is needed (in response
233 						 * to Vlink Clear async event */
234 
235 	/* Declarations private to FC transport */
236 	uint64_t	fcf_wwn;	/**< WWN for FCF/switch */
237 	ocs_list_link_t link;
238 	ocs_sm_ctx_t	drvsm;		/**< driver domain sm context */
239 	uint32_t	attached:1,	/**< set true after attach completes */
240 			is_fc:1,	/**< is FC */
241 			is_loop:1,	/**< is loop topology */
242 			is_nlport:1,	/**< is public loop */
243 			domain_found_pending:1,	/**< A domain found is pending, drec is updated */
244 			req_domain_free:1,	/**< True if domain object should be free'd */
245 			req_accept_frames:1,	/**< set in domain state machine to enable frames */
246 			domain_notify_pend:1;  /** Set in domain SM to avoid duplicate node event post */
247 	ocs_domain_record_t pending_drec; /**< Pending drec if a domain found is pending */
248 	uint8_t		service_params[OCS_SERVICE_PARMS_LENGTH]; /**< any sports service parameters */
249 	uint8_t		flogi_service_params[OCS_SERVICE_PARMS_LENGTH]; /**< Fabric/P2p service parameters from FLOGI */
250 	uint8_t		femul_enable;	/**< TRUE if Fabric Emulation mode is enabled */
251 
252 	/* Declarations shared with back-ends */
253 	sparse_vector_t lookup;		/**< d_id to node lookup object */
254 	ocs_lock_t	lookup_lock;
255 
256 	ocs_sli_port_t	*sport;		/**< Pointer to first (physical) SLI port (also at the head of sport_list) */
257 	uint32_t	sport_instance_count; /**< count of sport instances */
258 
259 	/* Fabric Emulation */
260 	ocs_bitmap_t *portid_pool;
261 	ocs_ns_t *ocs_ns;			/*>> Directory(Name) services data */
262 };
263 
264 /**
265  * @brief Remote Node object
266  *
267  * This object represents a connection between the SLI port and another
268  * Nx_Port on the fabric. Note this can be either a well known port such
269  * as a F_Port (i.e. ff:ff:fe) or another N_Port.
270  */
271 struct ocs_remote_node_s {
272 	/*
273 	 * Members private to HW/SLI
274 	 */
275 	uint32_t	indicator;	/**< RPI */
276 	uint32_t	index;
277 	uint32_t	fc_id;		/**< FC address */
278 
279 	uint32_t	attached:1,	/**< true if attached */
280 			node_group:1,	/**< true if in node group */
281 			free_group:1;	/**< true if the node group should be free'd */
282 
283 	ocs_sli_port_t	*sport;		/**< associated SLI port */
284 
285 	/*
286 	 * Implementation specific fields allowed here
287 	 */
288 	void *node;			/**< associated node */
289 };
290 
291 struct ocs_remote_node_group_s {
292 	/*
293 	 * Members private to HW/SLI
294 	 */
295 	uint32_t	indicator;	/**< RPI */
296 	uint32_t	index;
297 
298 	/*
299 	 * Implementation specific fields allowed here
300 	 */
301 
302 	uint32_t instance_index;		/*<< instance index */
303 	ocs_node_group_dir_t *node_group_dir;	/*<< pointer to the node group directory */
304 	ocs_list_link_t link;			/*<< linked list link */
305 };
306 
307 typedef enum {
308 	OCS_NODE_SHUTDOWN_DEFAULT = 0,
309 	OCS_NODE_SHUTDOWN_EXPLICIT_LOGO,
310 	OCS_NODE_SHUTDOWN_IMPLICIT_LOGO,
311 } ocs_node_shutd_rsn_e;
312 
313 typedef enum {
314 	OCS_NODE_SEND_LS_ACC_NONE = 0,
315 	OCS_NODE_SEND_LS_ACC_PLOGI,
316 	OCS_NODE_SEND_LS_ACC_PRLI,
317 } ocs_node_send_ls_acc_e;
318 
319 /**
320  * @brief FC Node object
321  *
322  */
323 struct ocs_node_s {
324 	ocs_t *ocs;				/**< pointer back to ocs structure */
325 	uint32_t instance_index;		/**< unique instance index value */
326 	char display_name[OCS_DISPLAY_NAME_LENGTH]; /**< Node display name */
327 	ocs_sport_t *sport;
328 	uint32_t hold_frames:1;			/**< hold incoming frames if true */
329 	ocs_rlock_t lock;			/**< node wide lock */
330 	ocs_lock_t active_ios_lock;		/**< active SCSI and XPORT I/O's for this node */
331 	ocs_list_t active_ios;			/**< active I/O's for this node */
332 	uint32_t max_wr_xfer_size;		/**< Max write IO size per phase for the transport */
333 	ocs_scsi_ini_node_t ini_node;		/**< backend initiator private node data */
334 	ocs_scsi_tgt_node_t tgt_node;		/**< backend target private node data */
335 	ocs_mgmt_functions_t *mgmt_functions;
336 
337 	/* Declarations private to HW/SLI */
338 	ocs_remote_node_t	rnode;		/**< Remote node */
339 
340 	/* Declarations private to FC transport */
341 	ocs_sm_ctx_t		sm;		/**< state machine context */
342 	uint32_t		evtdepth;	/**< current event posting nesting depth */
343 	uint32_t		req_free:1,	/**< this node is to be free'd */
344 				attached:1,	/**< node is attached (REGLOGIN complete) */
345 				fcp_enabled:1,	/**< node is enabled to handle FCP */
346 				rscn_pending:1,	/**< for name server node RSCN is pending */
347 				send_plogi:1,	/**< if initiator, send PLOGI at node initialization */
348 				send_plogi_acc:1,/**< send PLOGI accept, upon completion of node attach */
349 				io_alloc_enabled:1, /**< TRUE if ocs_scsi_io_alloc() and ocs_els_io_alloc() are enabled */
350 				sent_prli:1;    /**< if initiator, sent prli. */
351 	ocs_node_send_ls_acc_e	send_ls_acc;	/**< type of LS acc to send */
352 	ocs_io_t		*ls_acc_io;	/**< SCSI IO for LS acc */
353 	uint32_t		ls_acc_oxid;	/**< OX_ID for pending accept */
354 	uint32_t		ls_acc_did;	/**< D_ID for pending accept */
355 	ocs_node_shutd_rsn_e	shutdown_reason;/**< reason for node shutdown */
356 	ocs_dma_t		sparm_dma_buf;	/**< service parameters buffer */
357 	uint8_t			service_params[OCS_SERVICE_PARMS_LENGTH]; /**< plogi/acc frame from remote device */
358 	ocs_lock_t		pend_frames_lock; /**< lock for inbound pending frames list */
359 	ocs_list_t		pend_frames;	/**< inbound pending frames list */
360 	uint32_t		pend_frames_processed;	/**< count of frames processed in hold frames interval */
361 	uint32_t		ox_id_in_use;	/**< used to verify one at a time us of ox_id */
362 	uint32_t		els_retries_remaining;	/**< for ELS, number of retries remaining */
363 	uint32_t		els_req_cnt;	/**< number of outstanding ELS requests */
364 	uint32_t		els_cmpl_cnt;	/**< number of outstanding ELS completions */
365 	uint32_t		abort_cnt;	/**< Abort counter for debugging purpose */
366 
367 	char current_state_name[OCS_DISPLAY_NAME_LENGTH]; /**< current node state */
368 	char prev_state_name[OCS_DISPLAY_NAME_LENGTH]; /**< previous node state */
369 	ocs_sm_event_t		current_evt;	/**< current event */
370 	ocs_sm_event_t		prev_evt;	/**< current event */
371 	uint32_t		targ:1,		/**< node is target capable */
372 				init:1,		/**< node is initiator capable */
373 				refound:1,	/**< Handle node refound case when node is being deleted  */
374 				fcp2device:1,    /* FCP2 device */
375 				reserved:4,
376 				fc_type:8;
377 	ocs_list_t		els_io_pend_list;   /**< list of pending (not yet processed) ELS IOs */
378 	ocs_list_t		els_io_active_list; /**< list of active (processed) ELS IOs */
379 
380 	ocs_sm_function_t	nodedb_state;	/**< Node debugging, saved state */
381 
382 	ocs_timer_t		gidpt_delay_timer;	/**< GIDPT delay timer */
383 	time_t			time_last_gidpt_msec;	/**< Start time of last target RSCN GIDPT  */
384 
385 	/* WWN */
386 	char wwnn[OCS_WWN_LENGTH];		/**< remote port WWN (uses iSCSI naming) */
387 	char wwpn[OCS_WWN_LENGTH];		/**< remote port WWN (uses iSCSI naming) */
388 
389 	/* Statistics */
390 	uint32_t		chained_io_count;	/**< count of IOs with chained SGL's */
391 
392 	ocs_list_link_t		link;		/**< node list link */
393 
394 	ocs_remote_node_group_t	*node_group;	/**< pointer to node group (if HLM enabled) */
395 };
396 
397 /**
398  * @brief Virtual port specification
399  *
400  * Collection of the information required to restore a virtual port across
401  * link events
402  */
403 
404 typedef struct ocs_vport_spec_s ocs_vport_spec_t;
405 struct ocs_vport_spec_s {
406 	uint32_t domain_instance;		/*>> instance index of this domain for the sport */
407 	uint64_t wwnn;				/*>> node name */
408 	uint64_t wwpn;				/*>> port name */
409 	uint32_t fc_id;				/*>> port id */
410 	uint32_t enable_tgt:1,			/*>> port is a target */
411 		enable_ini:1;			/*>> port is an initiator */
412 	ocs_list_link_t link;			/*>> link */
413 	void	*tgt_data;			/**< target backend pointer */
414 	void	*ini_data;			/**< initiator backend pointer */
415 	ocs_sport_t *sport;			/**< Used to match record after attaching for update */
416 };
417 
418 #endif /* __OCS_COMMON_H__*/
419