1 /*- 2 * Copyright (c) 2002 Myson Technology Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. The name of the author may not be used to endorse or promote products 12 * derived from this software without specific prior written permission. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 18 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * Written by: yen_cw@myson.com.tw available at: http://www.myson.com.tw/ 27 * 28 * $FreeBSD$ 29 * 30 * Myson MTD80x register definitions. 31 * 32 */ 33 #define MY_PAR0 0x0 /* physical address 0-3 */ 34 #define MY_PAR1 0x04 /* physical address 4-5 */ 35 #define MY_MAR0 0x08 /* multicast address 0-3 */ 36 #define MY_MAR1 0x0C /* multicast address 4-7 */ 37 #define MY_FAR0 0x10 /* flow-control address 0-3 */ 38 #define MY_FAR1 0x14 /* flow-control address 4-5 */ 39 #define MY_TCRRCR 0x18 /* receive & transmit configuration */ 40 #define MY_BCR 0x1C /* bus command */ 41 #define MY_TXPDR 0x20 /* transmit polling demand */ 42 #define MY_RXPDR 0x24 /* receive polling demand */ 43 #define MY_RXCWP 0x28 /* receive current word pointer */ 44 #define MY_TXLBA 0x2C /* transmit list base address */ 45 #define MY_RXLBA 0x30 /* receive list base address */ 46 #define MY_ISR 0x34 /* interrupt status */ 47 #define MY_IMR 0x38 /* interrupt mask */ 48 #define MY_FTH 0x3C /* flow control high/low threshold */ 49 #define MY_MANAGEMENT 0x40 /* bootrom/eeprom and mii management */ 50 #define MY_TALLY 0x44 /* tally counters for crc and mpa */ 51 #define MY_TSR 0x48 /* tally counter for transmit status */ 52 #define MY_PHYBASE 0x4c 53 54 /* 55 * Receive Configuration Register 56 */ 57 #define MY_RXRUN 0x00008000 /* receive running status */ 58 #define MY_EIEN 0x00004000 /* early interrupt enable */ 59 #define MY_RFCEN 0x00002000 /* receive flow control packet enable */ 60 #define MY_NDFA 0x00001000 /* not defined flow control address */ 61 #define MY_RBLEN 0x00000800 /* receive burst length enable */ 62 #define MY_RPBLE1 0x00000000 /* 1 word */ 63 #define MY_RPBLE4 0x00000100 /* 4 words */ 64 #define MY_RPBLE8 0x00000200 /* 8 words */ 65 #define MY_RPBLE16 0x00000300 /* 16 words */ 66 #define MY_RPBLE32 0x00000400 /* 32 words */ 67 #define MY_RPBLE64 0x00000500 /* 64 words */ 68 #define MY_RPBLE128 0x00000600 /* 128 words */ 69 #define MY_RPBLE512 0x00000700 /* 512 words */ 70 #define MY_PROM 0x000000080 /* promiscuous mode */ 71 #define MY_AB 0x000000040 /* accept broadcast */ 72 #define MY_AM 0x000000020 /* accept mutlicast */ 73 #define MY_ARP 0x000000008 /* receive runt pkt */ 74 #define MY_ALP 0x000000004 /* receive long pkt */ 75 #define MY_SEP 0x000000002 /* receive error pkt */ 76 #define MY_RE 0x000000001 /* receive enable */ 77 78 /* 79 * Transmit Configuration Register 80 */ 81 #define MY_TXRUN 0x04000000 /* transmit running status */ 82 #define MY_Enhanced 0x02000000 /* transmit enhanced mode */ 83 #define MY_TFCEN 0x01000000 /* tx flow control packet enable */ 84 #define MY_TFT64 0x00000000 /* 64 bytes */ 85 #define MY_TFT32 0x00200000 /* 32 bytes */ 86 #define MY_TFT128 0x00400000 /* 128 bytes */ 87 #define MY_TFT256 0x00600000 /* 256 bytes */ 88 #define MY_TFT512 0x00800000 /* 512 bytes */ 89 #define MY_TFT768 0x00A00000 /* 768 bytes */ 90 #define MY_TFT1024 0x00C00000 /* 1024 bytes */ 91 #define MY_TFTSF 0x00E00000 /* store and forward */ 92 #define MY_FD 0x00100000 /* full duplex mode */ 93 #define MY_PS10 0x00080000 /* port speed is 10M */ 94 #define MY_TE 0x00040000 /* transmit enable */ 95 #define MY_PS1000 0x00010000 /* port speed is 1000M */ 96 /* 97 * Bus Command Register 98 */ 99 #define MY_PROG 0x00000200 /* programming */ 100 #define MY_RLE 0x00000100 /* read line command enable */ 101 #define MY_RME 0x00000080 /* read multiple command enable */ 102 #define MY_WIE 0x00000040 /* write and invalidate cmd enable */ 103 #define MY_PBL1 0x00000000 /* 1 dword */ 104 #define MY_PBL4 0x00000008 /* 4 dwords */ 105 #define MY_PBL8 0x00000010 /* 8 dwords */ 106 #define MY_PBL16 0x00000018 /* 16 dwords */ 107 #define MY_PBL32 0x00000020 /* 32 dwords */ 108 #define MY_PBL64 0x00000028 /* 64 dwords */ 109 #define MY_PBL128 0x00000030 /* 128 dwords */ 110 #define MY_PBL512 0x00000038 /* 512 dwords */ 111 #define MY_ABR 0x00000004 /* arbitration rule */ 112 #define MY_BLS 0x00000002 /* big/little endian select */ 113 #define MY_SWR 0x00000001 /* software reset */ 114 115 /* 116 * Transmit Poll Demand Register 117 */ 118 #define MY_TxPollDemand 0x1 119 120 /* 121 * Receive Poll Demand Register 122 */ 123 #define MY_RxPollDemand 0x01 124 125 /* 126 * Interrupt Status Register 127 */ 128 #define MY_RFCON 0x00020000 /* receive flow control xon packet */ 129 #define MY_RFCOFF 0x00010000 /* receive flow control xoff packet */ 130 #define MY_LSCStatus 0x00008000 /* link status change */ 131 #define MY_ANCStatus 0x00004000 /* autonegotiation completed */ 132 #define MY_FBE 0x00002000 /* fatal bus error */ 133 #define MY_FBEMask 0x00001800 134 #define MY_ParityErr 0x00000000 /* parity error */ 135 #define MY_MasterErr 0x00000800 /* master error */ 136 #define MY_TargetErr 0x00001000 /* target abort */ 137 #define MY_TUNF 0x00000400 /* transmit underflow */ 138 #define MY_ROVF 0x00000200 /* receive overflow */ 139 #define MY_ETI 0x00000100 /* transmit early int */ 140 #define MY_ERI 0x00000080 /* receive early int */ 141 #define MY_CNTOVF 0x00000040 /* counter overflow */ 142 #define MY_RBU 0x00000020 /* receive buffer unavailable */ 143 #define MY_TBU 0x00000010 /* transmit buffer unavilable */ 144 #define MY_TI 0x00000008 /* transmit interrupt */ 145 #define MY_RI 0x00000004 /* receive interrupt */ 146 #define MY_RxErr 0x00000002 /* receive error */ 147 148 /* 149 * Interrupt Mask Register 150 */ 151 #define MY_MRFCON 0x00020000 /* receive flow control xon packet */ 152 #define MY_MRFCOFF 0x00010000 /* receive flow control xoff packet */ 153 #define MY_MLSCStatus 0x00008000 /* link status change */ 154 #define MY_MANCStatus 0x00004000 /* autonegotiation completed */ 155 #define MY_MFBE 0x00002000 /* fatal bus error */ 156 #define MY_MFBEMask 0x00001800 157 #define MY_MTUNF 0x00000400 /* transmit underflow */ 158 #define MY_MROVF 0x00000200 /* receive overflow */ 159 #define MY_METI 0x00000100 /* transmit early int */ 160 #define MY_MERI 0x00000080 /* receive early int */ 161 #define MY_MCNTOVF 0x00000040 /* counter overflow */ 162 #define MY_MRBU 0x00000020 /* receive buffer unavailable */ 163 #define MY_MTBU 0x00000010 /* transmit buffer unavilable */ 164 #define MY_MTI 0x00000008 /* transmit interrupt */ 165 #define MY_MRI 0x00000004 /* receive interrupt */ 166 #define MY_MRxErr 0x00000002 /* receive error */ 167 168 /* 90/1/18 delete */ 169 /* #define MY_INTRS MY_FBE|MY_MRBU|MY_TBU|MY_MTI|MY_MRI|MY_METI */ 170 #define MY_INTRS MY_MRBU|MY_TBU|MY_MTI|MY_MRI|MY_METI 171 172 /* 173 * Flow Control High/Low Threshold Register 174 */ 175 #define MY_FCHTShift 16 /* flow control high threshold */ 176 #define MY_FCLTShift 0 /* flow control low threshold */ 177 178 /* 179 * BootROM/EEPROM/MII Management Register 180 */ 181 #define MY_MASK_MIIR_MII_READ 0x00000000 182 #define MY_MASK_MIIR_MII_WRITE 0x00000008 183 #define MY_MASK_MIIR_MII_MDO 0x00000004 184 #define MY_MASK_MIIR_MII_MDI 0x00000002 185 #define MY_MASK_MIIR_MII_MDC 0x00000001 186 187 /* 188 * Tally Counter for CRC and MPA 189 */ 190 #define MY_TCOVF 0x80000000 /* crc tally counter overflow */ 191 #define MY_CRCMask 0x7fff0000 /* crc number: bit 16-30 */ 192 #define MY_CRCShift 16 193 #define MY_TMOVF 0x00008000 /* mpa tally counter overflow */ 194 #define MY_MPAMask 0x00007fff /* mpa number: bit 0-14 */ 195 #define MY_MPAShift 0 196 197 /* 198 * Tally Counters for transmit status 199 */ 200 #define MY_AbortMask 0xff000000 /* transmit abort number */ 201 #define MY_AbortShift 24 202 #define MY_LColMask 0x00ff0000 /* transmit late collisions */ 203 #define MY_LColShift 16 204 #define MY_NCRMask 0x0000ffff /* transmit retry number */ 205 #define MY_NCRShift 0 206 207 /* 208 * Myson TX/RX descriptor structure. 209 */ 210 211 struct my_desc { 212 u_int32_t my_status; 213 u_int32_t my_ctl; 214 u_int32_t my_data; 215 u_int32_t my_next; 216 }; 217 218 /* 219 * for tx/rx descriptors 220 */ 221 #define MY_OWNByNIC 0x80000000 222 #define MY_OWNByDriver 0x0 223 224 /* 225 * receive descriptor 0 226 */ 227 #define MY_RXOWN 0x80000000 /* own bit */ 228 #define MY_FLNGMASK 0x0fff0000 /* frame length */ 229 #define MY_FLNGShift 16 230 #define MY_MARSTATUS 0x00004000 /* multicast address received */ 231 #define MY_BARSTATUS 0x00002000 /* broadcast address received */ 232 #define MY_PHYSTATUS 0x00001000 /* physical address received */ 233 #define MY_RXFSD 0x00000800 /* first descriptor */ 234 #define MY_RXLSD 0x00000400 /* last descriptor */ 235 #define MY_ES 0x00000080 /* error summary */ 236 #define MY_RUNT 0x00000040 /* runt packet received */ 237 #define MY_LONG 0x00000020 /* long packet received */ 238 #define MY_FAE 0x00000010 /* frame align error */ 239 #define MY_CRC 0x00000008 /* crc error */ 240 #define MY_RXER 0x00000004 /* receive error */ 241 #define MY_RDES0CHECK 0x000078fc /* only check MAR, BAR, PHY, ES, RUNT, 242 LONG, FAE, CRC and RXER bits */ 243 244 /* 245 * receive descriptor 1 246 */ 247 #define MY_RXIC 0x00800000 /* interrupt control */ 248 #define MY_RBSMASK 0x000007ff /* receive buffer size */ 249 #define MY_RBSShift 0 250 251 /* 252 * transmit descriptor 0 253 */ 254 #define MY_TXERR 0x00008000 /* transmit error */ 255 #define MY_JABTO 0x00004000 /* jabber timeout */ 256 #define MY_CSL 0x00002000 /* carrier sense lost */ 257 #define MY_LC 0x00001000 /* late collision */ 258 #define MY_EC 0x00000800 /* excessive collision */ 259 #define MY_UDF 0x00000400 /* fifo underflow */ 260 #define MY_DFR 0x00000200 /* deferred */ 261 #define MY_HF 0x00000100 /* heartbeat fail */ 262 #define MY_NCRMASK 0x000000ff /* collision retry count */ 263 #define MY_NCRShift 0 264 265 /* 266 * tx descriptor 1 267 */ 268 #define MY_TXIC 0x80000000 /* interrupt control */ 269 #define MY_ETIControl 0x40000000 /* early transmit interrupt */ 270 #define MY_TXLD 0x20000000 /* last descriptor */ 271 #define MY_TXFD 0x10000000 /* first descriptor */ 272 #define MY_CRCDisable 0x00000000 /* crc control */ 273 #define MY_CRCEnable 0x08000000 274 #define MY_PADDisable 0x00000000 /* padding control */ 275 #define MY_PADEnable 0x04000000 276 #define MY_RetryTxLC 0x02000000 /* retry late collision */ 277 #define MY_PKTShift 11 /* transmit pkt size */ 278 #define MY_TBSMASK 0x000007ff 279 #define MY_TBSShift 0 /* transmit buffer size */ 280 281 #define MY_MAXFRAGS 1 282 #define MY_RX_LIST_CNT 64 283 #define MY_TX_LIST_CNT 64 284 #define MY_MIN_FRAMELEN 60 285 286 /* 287 * A transmit 'super descriptor' is actually MY_MAXFRAGS regular 288 * descriptors clumped together. The idea here is to emulate the 289 * multi-fragment descriptor layout found in devices such as the 290 * Texas Instruments ThunderLAN and 3Com boomerang and cylone chips. 291 * The advantage to using this scheme is that it avoids buffer copies. 292 * The disadvantage is that there's a certain amount of overhead due 293 * to the fact that each 'fragment' is 16 bytes long. In my tests, 294 * this limits top speed to about 10.5MB/sec. It should be more like 295 * 11.5MB/sec. However, the upshot is that you can achieve better 296 * results on slower machines: a Pentium 200 can pump out packets at 297 * same speed as a PII 400. 298 */ 299 struct my_txdesc { 300 struct my_desc my_frag[MY_MAXFRAGS]; 301 }; 302 303 #define MY_TXSTATUS(x) x->my_ptr->my_frag[x->my_lastdesc].my_status 304 #define MY_TXCTL(x) x->my_ptr->my_frag[x->my_lastdesc].my_ctl 305 #define MY_TXDATA(x) x->my_ptr->my_frag[x->my_lastdesc].my_data 306 #define MY_TXNEXT(x) x->my_ptr->my_frag[x->my_lastdesc].my_next 307 308 #define MY_TXOWN(x) x->my_ptr->my_frag[0].my_status 309 310 #define MY_UNSENT 0x1234 311 312 struct my_list_data { 313 struct my_desc my_rx_list[MY_RX_LIST_CNT]; 314 struct my_txdesc my_tx_list[MY_TX_LIST_CNT]; 315 }; 316 317 struct my_chain { 318 struct my_txdesc *my_ptr; 319 struct mbuf *my_mbuf; 320 struct my_chain *my_nextdesc; 321 u_int8_t my_lastdesc; 322 }; 323 324 struct my_chain_onefrag { 325 struct my_desc *my_ptr; 326 struct mbuf *my_mbuf; 327 struct my_chain_onefrag *my_nextdesc; 328 u_int8_t my_rlast; 329 }; 330 331 struct my_chain_data { 332 struct my_chain_onefrag my_rx_chain[MY_RX_LIST_CNT]; 333 struct my_chain my_tx_chain[MY_TX_LIST_CNT]; 334 335 struct my_chain_onefrag *my_rx_head; 336 337 struct my_chain *my_tx_head; 338 struct my_chain *my_tx_tail; 339 struct my_chain *my_tx_free; 340 }; 341 342 struct my_type { 343 u_int16_t my_vid; 344 u_int16_t my_did; 345 char *my_name; 346 }; 347 348 #define MY_FLAG_FORCEDELAY 1 349 #define MY_FLAG_SCHEDDELAY 2 350 #define MY_FLAG_DELAYTIMEO 3 351 352 struct my_softc { 353 struct ifnet *my_ifp; 354 device_t my_dev; 355 struct ifmedia ifmedia; /* media info */ 356 bus_space_handle_t my_bhandle; 357 bus_space_tag_t my_btag; 358 struct my_type *my_info; /* adapter info */ 359 struct my_type *my_pinfo; /* phy info */ 360 struct resource *my_res; 361 struct resource *my_irq; 362 void *my_intrhand; 363 u_int8_t my_phy_addr; /* PHY address */ 364 u_int8_t my_tx_pend; /* TX pending */ 365 u_int8_t my_want_auto; 366 u_int8_t my_autoneg; 367 u_int16_t my_txthresh; 368 u_int8_t my_stats_no_timeout; 369 caddr_t my_ldata_ptr; 370 struct my_list_data *my_ldata; 371 struct my_chain_data my_cdata; 372 device_t my_miibus; 373 /* Add by Surfer 2001/12/2 */ 374 struct mtx my_mtx; 375 struct callout my_autoneg_timer; 376 struct callout my_watchdog; 377 int my_timer; 378 }; 379 380 /* Add by Surfer 2001/12/2 */ 381 #define MY_LOCK(_sc) mtx_lock(&(_sc)->my_mtx) 382 #define MY_UNLOCK(_sc) mtx_unlock(&(_sc)->my_mtx) 383 #define MY_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->my_mtx, MA_OWNED) 384 385 /* 386 * register space access macros 387 */ 388 #define CSR_WRITE_4(sc, reg, val) \ 389 bus_space_write_4(sc->my_btag, sc->my_bhandle, reg, val) 390 #define CSR_WRITE_2(sc, reg, val) \ 391 bus_space_write_2(sc->my_btag, sc->my_bhandle, reg, val) 392 #define CSR_WRITE_1(sc, reg, val) \ 393 bus_space_write_1(sc->my_btag, sc->my_bhandle, reg, val) 394 395 #define CSR_READ_4(sc, reg) \ 396 bus_space_read_4(sc->my_btag, sc->my_bhandle, reg) 397 #define CSR_READ_2(sc, reg) \ 398 bus_space_read_2(sc->my_btag, sc->my_bhandle, reg) 399 #define CSR_READ_1(sc, reg) \ 400 bus_space_read_1(sc->my_btag, sc->my_bhandle, reg) 401 402 #define MY_TIMEOUT 1000 403 404 /* 405 * General constants that are fun to know. 406 * 407 * MYSON PCI vendor ID 408 */ 409 #define MYSONVENDORID 0x1516 410 411 /* 412 * MYSON device IDs. 413 */ 414 #define MTD800ID 0x0800 415 #define MTD803ID 0x0803 416 #define MTD891ID 0x0891 417 418 /* 419 * ST+OP+PHYAD+REGAD+TA 420 */ 421 #define MY_OP_READ 0x6000 /* ST:01+OP:10+PHYAD+REGAD+TA:Z0 */ 422 #define MY_OP_WRITE 0x5002 /* ST:01+OP:01+PHYAD+REGAD+TA:10 */ 423 424 /* 425 * Constansts for Myson PHY 426 */ 427 #define MysonPHYID0 0x0300 428 429 /* 430 * Constansts for Seeq 80225 PHY 431 */ 432 #define SeeqPHYID0 0x0016 433 434 #define SEEQ_MIIRegister18 18 435 #define SEEQ_SPD_DET_100 0x80 436 #define SEEQ_DPLX_DET_FULL 0x40 437 438 /* 439 * Constansts for Ahdoc 101 PHY 440 */ 441 #define AhdocPHYID0 0x0022 442 443 #define AHDOC_DiagnosticReg 18 444 #define AHDOC_DPLX_FULL 0x0800 445 #define AHDOC_Speed_100 0x0400 446 447 /* 448 * Constansts for Marvell 88E1000/88E1000S PHY and LevelOne PHY 449 */ 450 #define MarvellPHYID0 0x0141 451 #define LevelOnePHYID0 0x0013 452 453 #define Marvell_SpecificStatus 17 454 #define Marvell_Speed1000 0x8000 455 #define Marvell_Speed100 0x4000 456 #define Marvell_FullDuplex 0x2000 457 458 /* 459 * PCI low memory base and low I/O base register, and 460 * other PCI registers. Note: some are only available on 461 * the 3c905B, in particular those that related to power management. 462 */ 463 #define MY_PCI_VENDOR_ID 0x00 464 #define MY_PCI_DEVICE_ID 0x02 465 #define MY_PCI_COMMAND 0x04 466 #define MY_PCI_STATUS 0x06 467 #define MY_PCI_CLASSCODE 0x09 468 #define MY_PCI_LATENCY_TIMER 0x0D 469 #define MY_PCI_HEADER_TYPE 0x0E 470 #define MY_PCI_LOIO 0x10 471 #define MY_PCI_LOMEM 0x14 472 #define MY_PCI_BIOSROM 0x30 473 #define MY_PCI_INTLINE 0x3C 474 #define MY_PCI_INTPIN 0x3D 475 #define MY_PCI_MINGNT 0x3E 476 #define MY_PCI_MINLAT 0x0F 477 #define MY_PCI_RESETOPT 0x48 478 #define MY_PCI_EEPROM_DATA 0x4C 479 480 #define PHY_UNKNOWN 3 481 482 #define MY_PHYADDR_MIN 0x00 483 #define MY_PHYADDR_MAX 0x1F 484 485 #define PHY_BMCR 0x00 486 #define PHY_BMSR 0x01 487 #define PHY_VENID 0x02 488 #define PHY_DEVID 0x03 489 #define PHY_ANAR 0x04 490 #define PHY_LPAR 0x05 491 #define PHY_ANEXP 0x06 492 #define PHY_NPTR 0x07 493 #define PHY_LPNPR 0x08 494 #define PHY_1000CR 0x09 495 #define PHY_1000SR 0x0a 496 497 #define PHY_ANAR_NEXTPAGE 0x8000 498 #define PHY_ANAR_RSVD0 0x4000 499 #define PHY_ANAR_TLRFLT 0x2000 500 #define PHY_ANAR_RSVD1 0x1000 501 #define PHY_ANAR_RSVD2 0x0800 502 #define PHY_ANAR_RSVD3 0x0400 503 #define PHY_ANAR_100BT4 0x0200L 504 #define PHY_ANAR_100BTXFULL 0x0100 505 #define PHY_ANAR_100BTXHALF 0x0080 506 #define PHY_ANAR_10BTFULL 0x0040 507 #define PHY_ANAR_10BTHALF 0x0020 508 #define PHY_ANAR_PROTO4 0x0010 509 #define PHY_ANAR_PROTO3 0x0008 510 #define PHY_ANAR_PROTO2 0x0004 511 #define PHY_ANAR_PROTO1 0x0002 512 #define PHY_ANAR_PROTO0 0x0001 513 514 #define PHY_1000SR_1000BTXFULL 0x0800 515 #define PHY_1000SR_1000BTXHALF 0x0400 516 517 /* 518 * These are the register definitions for the PHY (physical layer 519 * interface chip). 520 */ 521 /* 522 * PHY BMCR Basic Mode Control Register 523 */ 524 #define PHY_BMCR_RESET 0x8000 525 #define PHY_BMCR_LOOPBK 0x4000 526 #define PHY_BMCR_SPEEDSEL 0x2000 527 #define PHY_BMCR_AUTONEGENBL 0x1000 528 #define PHY_BMCR_RSVD0 0x0800 /* write as zero */ 529 #define PHY_BMCR_ISOLATE 0x0400 530 #define PHY_BMCR_AUTONEGRSTR 0x0200 531 #define PHY_BMCR_DUPLEX 0x0100 532 #define PHY_BMCR_COLLTEST 0x0080 533 #define PHY_BMCR_1000 0x0040 /* only used for Marvell PHY */ 534 #define PHY_BMCR_RSVD2 0x0020 /* write as zero, don't care */ 535 #define PHY_BMCR_RSVD3 0x0010 /* write as zero, don't care */ 536 #define PHY_BMCR_RSVD4 0x0008 /* write as zero, don't care */ 537 #define PHY_BMCR_RSVD5 0x0004 /* write as zero, don't care */ 538 #define PHY_BMCR_RSVD6 0x0002 /* write as zero, don't care */ 539 #define PHY_BMCR_RSVD7 0x0001 /* write as zero, don't care */ 540 541 /* 542 * RESET: 1 == software reset, 0 == normal operation 543 * Resets status and control registers to default values. 544 * Relatches all hardware config values. 545 * 546 * LOOPBK: 1 == loopback operation enabled, 0 == normal operation 547 * 548 * SPEEDSEL: 1 == 100Mb/s, 0 == 10Mb/s 549 * Link speed is selected byt his bit or if auto-negotiation if bit 550 * 12 (AUTONEGENBL) is set (in which case the value of this register 551 * is ignored). 552 * 553 * AUTONEGENBL: 1 == Autonegotiation enabled, 0 == Autonegotiation disabled 554 * Bits 8 and 13 are ignored when autoneg is set, otherwise bits 8 and 13 555 * determine speed and mode. Should be cleared and then set if PHY configured 556 * for no autoneg on startup. 557 * 558 * ISOLATE: 1 == isolate PHY from MII, 0 == normal operation 559 * 560 * AUTONEGRSTR: 1 == restart autonegotiation, 0 = normal operation 561 * 562 * DUPLEX: 1 == full duplex mode, 0 == half duplex mode 563 * 564 * COLLTEST: 1 == collision test enabled, 0 == normal operation 565 */ 566 567 /* 568 * PHY, BMSR Basic Mode Status Register 569 */ 570 #define PHY_BMSR_100BT4 0x8000 571 #define PHY_BMSR_100BTXFULL 0x4000 572 #define PHY_BMSR_100BTXHALF 0x2000 573 #define PHY_BMSR_10BTFULL 0x1000 574 #define PHY_BMSR_10BTHALF 0x0800 575 #define PHY_BMSR_RSVD1 0x0400 /* write as zero, don't care */ 576 #define PHY_BMSR_RSVD2 0x0200 /* write as zero, don't care */ 577 #define PHY_BMSR_RSVD3 0x0100 /* write as zero, don't care */ 578 #define PHY_BMSR_RSVD4 0x0080 /* write as zero, don't care */ 579 #define PHY_BMSR_MFPRESUP 0x0040 580 #define PHY_BMSR_AUTONEGCOMP 0x0020 581 #define PHY_BMSR_REMFAULT 0x0010 582 #define PHY_BMSR_CANAUTONEG 0x0008 583 #define PHY_BMSR_LINKSTAT 0x0004 584 #define PHY_BMSR_JABBER 0x0002 585 #define PHY_BMSR_EXTENDED 0x0001 586 587 588