1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 #include "mvs_if.h" 32 33 /* Chip registers */ 34 #define CHIP_PCIEIC 0x1900 /* PCIe Interrupt Cause */ 35 #define CHIP_PCIEIM 0x1910 /* PCIe Interrupt Mask */ 36 #define CHIP_PCIIC 0x1d58 /* PCI Interrupt Cause */ 37 #define CHIP_PCIIM 0x1d5c /* PCI Interrupt Mask */ 38 #define CHIP_MIC 0x1d60 /* Main Interrupt Cause */ 39 #define CHIP_MIM 0x1d64 /* Main Interrupt Mask */ 40 #define CHIP_SOC_MIC 0x20 /* SoC Main Interrupt Cause */ 41 #define CHIP_SOC_MIM 0x24 /* SoC Main Interrupt Mask */ 42 #define IC_ERR_IRQ (1 << 0) /* shift by (2 * port #) */ 43 #define IC_DONE_IRQ (1 << 1) /* shift by (2 * port #) */ 44 #define IC_HC0 0x000001ff /* bits 0-8 = HC0 */ 45 #define IC_HC_SHIFT 9 /* HC1 shift */ 46 #define IC_HC1 (IC_HC0 << IC_HC_SHIFT) /* 9-17 = HC1 */ 47 #define IC_ERR_HC0 0x00000055 /* HC0 ERR_IRQ */ 48 #define IC_DONE_HC0 0x000000aa /* HC0 DONE_IRQ */ 49 #define IC_ERR_HC1 (IC_ERR_HC0 << IC_HC_SHIFT) /* HC1 ERR_IRQ */ 50 #define IC_DONE_HC1 (IC_DONE_HC0 << IC_HC_SHIFT) /* HC1 DONE_IRQ */ 51 #define IC_HC0_COAL_DONE (1 << 8) /* HC0 IRQ coalescing */ 52 #define IC_HC1_COAL_DONE (1 << 17) /* HC1 IRQ coalescing */ 53 #define IC_PCI_ERR (1 << 18) 54 #define IC_TRAN_COAL_LO_DONE (1 << 19) /* transaction coalescing */ 55 #define IC_TRAN_COAL_HI_DONE (1 << 20) /* transaction coalescing */ 56 #define IC_ALL_PORTS_COAL_DONE (1 << 21) /* GEN_II(E) IRQ coalescing */ 57 #define IC_GPIO_INT (1 << 22) 58 #define IC_SELF_INT (1 << 23) 59 #define IC_TWSI_INT (1 << 24) 60 #define IC_MAIN_RSVD (0xfe000000) /* bits 31-25 */ 61 #define IC_MAIN_RSVD_5 (0xfff10000) /* bits 31-19 */ 62 #define IC_MAIN_RSVD_SOC (0xfffffec0) /* bits 31-9, 7-6 */ 63 64 #define CHIP_SOC_LED 0x2C /* SoC LED Configuration */ 65 66 /* Additional mask for SoC devices with less than 4 channels */ 67 #define CHIP_SOC_HC0_MASK(num) (0xff >> ((4 - (num)) * 2)) 68 69 /* Chip CCC registers */ 70 #define CHIP_ICC 0x18008 71 #define CHIP_ICC_ALL_PORTS (1 << 4) /* all ports irq event */ 72 #define CHIP_ICT 0x180cc 73 #define CHIP_ITT 0x180d0 74 #define CHIP_TRAN_COAL_CAUSE_LO 0x18088 75 #define CHIP_TRAN_COAL_CAUSE_HI 0x1808c 76 77 /* Host Controller registers */ 78 #define HC_SIZE 0x10000 79 #define HC_OFFSET 0x20000 80 #define HC_BASE(hc) ((hc) * HC_SIZE + HC_OFFSET) 81 82 #define HC_CFG 0x0 /* Configuration */ 83 #define HC_CFG_TIMEOUT_MASK (0xff << 0) 84 #define HC_CFG_NODMABS (1 << 8) 85 #define HC_CFG_NOEDMABS (1 << 9) 86 #define HC_CFG_NOPRDBS (1 << 10) 87 #define HC_CFG_TIMEOUTEN (1 << 16) /* Timer Enable */ 88 #define HC_CFG_COALDIS(p) (1 << ((p) + 24))/* Coalescing Disable*/ 89 #define HC_RQOP 0x4 /* Request Queue Out-Pointer */ 90 #define HC_RQIP 0x8 /* Response Queue In-Pointer */ 91 #define HC_ICT 0xc /* Interrupt Coalescing Threshold */ 92 #define HC_ICT_SAICOALT_MASK 0x000000ff 93 #define HC_ITT 0x10 /* Interrupt Time Threshold */ 94 #define HC_ITT_SAITMTH_MASK 0x00ffffff 95 #define HC_IC 0x14 /* Interrupt Cause */ 96 #define HC_IC_DONE(p) (1 << (p)) /* SaCrpb/DMA Done */ 97 #define HC_IC_COAL (1 << 4) /* Intr Coalescing */ 98 #define HC_IC_DEV(p) (1 << ((p) + 8)) /* Device Intr */ 99 100 /* Port registers */ 101 #define PORT_SIZE 0x2000 102 #define PORT_OFFSET 0x2000 103 #define PORT_BASE(hc) ((hc) * PORT_SIZE + PORT_OFFSET) 104 105 #define EDMA_CFG 0x0 /* Configuration */ 106 #define EDMA_CFG_RESERVED (0x1f << 0) /* Queue len ? */ 107 #define EDMA_CFG_ESATANATVCMDQUE (1 << 5) 108 #define EDMA_CFG_ERDBSZ (1 << 8) 109 #define EDMA_CFG_EQUE (1 << 9) 110 #define EDMA_CFG_ERDBSZEXT (1 << 11) 111 #define EDMA_CFG_RESERVED2 (1 << 12) 112 #define EDMA_CFG_EWRBUFFERLEN (1 << 13) 113 #define EDMA_CFG_EDEVERR (1 << 14) 114 #define EDMA_CFG_EEDMAFBS (1 << 16) 115 #define EDMA_CFG_ECUTTHROUGHEN (1 << 17) 116 #define EDMA_CFG_EEARLYCOMPLETIONEN (1 << 18) 117 #define EDMA_CFG_EEDMAQUELEN (1 << 19) 118 #define EDMA_CFG_EHOSTQUEUECACHEEN (1 << 22) 119 #define EDMA_CFG_EMASKRXPM (1 << 23) 120 #define EDMA_CFG_RESUMEDIS (1 << 24) 121 #define EDMA_CFG_EDMAFBS (1 << 26) 122 #define EDMA_T 0x4 /* Timer */ 123 #define EDMA_IEC 0x8 /* Interrupt Error Cause */ 124 #define EDMA_IEM 0xc /* Interrupt Error Mask */ 125 #define EDMA_IE_EDEVERR (1 << 2) /* EDMA Device Error */ 126 #define EDMA_IE_EDEVDIS (1 << 3) /* EDMA Dev Disconn */ 127 #define EDMA_IE_EDEVCON (1 << 4) /* EDMA Dev Conn */ 128 #define EDMA_IE_SERRINT (1 << 5) 129 #define EDMA_IE_ESELFDIS (1 << 7) /* EDMA Self Disable */ 130 #define EDMA_IE_ETRANSINT (1 << 8) /* Transport Layer */ 131 #define EDMA_IE_EIORDYERR (1 << 12) /* EDMA IORdy Error */ 132 #define EDMA_IE_LINKXERR_SATACRC (1 << 0) /* SATA CRC error */ 133 #define EDMA_IE_LINKXERR_INTERNALFIFO (1 << 1) /* internal FIFO err */ 134 #define EDMA_IE_LINKXERR_LINKLAYERRESET (1 << 2) 135 /* Link Layer is reset by the reception of SYNC primitive from device */ 136 #define EDMA_IE_LINKXERR_OTHERERRORS (1 << 3) 137 /* 138 * Link state errors, coding errors, or running disparity errors occur 139 * during FIS reception. 140 */ 141 #define EDMA_IE_LINKTXERR_FISTXABORTED (1 << 4) /* FIS Tx is aborted */ 142 #define EDMA_IE_LINKCTLRXERR(x) ((x) << 13) /* Link Ctrl Recv Err */ 143 #define EDMA_IE_LINKDATARXERR(x) ((x) << 17) /* Link Data Recv Err */ 144 #define EDMA_IE_LINKCTLTXERR(x) ((x) << 21) /* Link Ctrl Tx Error */ 145 #define EDMA_IE_LINKDATATXERR(x) ((x) << 26) /* Link Data Tx Error */ 146 #define EDMA_IE_TRANSPROTERR (1U << 31) /* Transport Proto E */ 147 #define EDMA_IE_TRANSIENT (EDMA_IE_LINKCTLRXERR(0x0b) | \ 148 EDMA_IE_LINKCTLTXERR(0x1f)) 149 /* Non-fatal Errors */ 150 #define EDMA_REQQBAH 0x10 /* Request Queue Base Address High */ 151 #define EDMA_REQQIP 0x14 /* Request Queue In-Pointer */ 152 #define EDMA_REQQOP 0x18 /* Request Queue Out-Pointer */ 153 #define EDMA_REQQP_ERQQP_SHIFT 5 154 #define EDMA_REQQP_ERQQP_MASK 0x000003e0 155 #define EDMA_REQQP_ERQQBAP_MASK 0x00000c00 156 #define EDMA_REQQP_ERQQBA_MASK 0xfffff000 157 #define EDMA_RESQBAH 0x1c /* Response Queue Base Address High */ 158 #define EDMA_RESQIP 0x20 /* Response Queue In-Pointer */ 159 #define EDMA_RESQOP 0x24 /* Response Queue Out-Pointer */ 160 #define EDMA_RESQP_ERPQP_SHIFT 3 161 #define EDMA_RESQP_ERPQP_MASK 0x000000f8 162 #define EDMA_RESQP_ERPQBAP_MASK 0x00000300 163 #define EDMA_RESQP_ERPQBA_MASK 0xfffffc00 164 #define EDMA_CMD 0x28 /* Command */ 165 #define EDMA_CMD_EENEDMA (1 << 0) /* Enable EDMA */ 166 #define EDMA_CMD_EDSEDMA (1 << 1) /* Disable EDMA */ 167 #define EDMA_CMD_EATARST (1 << 2) /* ATA Device Reset */ 168 #define EDMA_CMD_EEDMAFRZ (1 << 4) /* EDMA Freeze */ 169 #define EDMA_TC 0x2c /* Test Control */ 170 #define EDMA_S 0x30 /* Status */ 171 #define EDMA_S_EDEVQUETAG(s) ((s) & 0x0000001f) 172 #define EDMA_S_EDEVDIR_WRITE (0 << 5) 173 #define EDMA_S_EDEVDIR_READ (1 << 5) 174 #define EDMA_S_ECACHEEMPTY (1 << 6) 175 #define EDMA_S_EDMAIDLE (1 << 7) 176 #define EDMA_S_ESTATE(s) (((s) & 0x0000ff00) >> 8) 177 #define EDMA_S_EIOID(s) (((s) & 0x003f0000) >> 16) 178 #define EDMA_IORT 0x34 /* IORdy Timeout */ 179 #define EDMA_CDT 0x40 /* Command Delay Threshold */ 180 #define EDMA_HC 0x60 /* Halt Condition */ 181 #define EDMA_UNKN_RESD 0x6C /* Unknown register */ 182 #define EDMA_CQDCQOS(x) (0x90 + ((x) << 2) 183 /* NCQ Done/TCQ Outstanding Status */ 184 185 /* ATA register defines */ 186 #define ATA_DATA 0x100 /* (RW) data */ 187 #define ATA_FEATURE 0x104 /* (W) feature */ 188 #define ATA_F_DMA 0x01 /* enable DMA */ 189 #define ATA_F_OVL 0x02 /* enable overlap */ 190 #define ATA_ERROR 0x104 /* (R) error */ 191 #define ATA_E_ILI 0x01 /* illegal length */ 192 #define ATA_E_NM 0x02 /* no media */ 193 #define ATA_E_ABORT 0x04 /* command aborted */ 194 #define ATA_E_MCR 0x08 /* media change request */ 195 #define ATA_E_IDNF 0x10 /* ID not found */ 196 #define ATA_E_MC 0x20 /* media changed */ 197 #define ATA_E_UNC 0x40 /* uncorrectable data */ 198 #define ATA_E_ICRC 0x80 /* UDMA crc error */ 199 #define ATA_E_ATAPI_SENSE_MASK 0xf0 /* ATAPI sense key mask */ 200 #define ATA_COUNT 0x108 /* (W) sector count */ 201 #define ATA_IREASON 0x108 /* (R) interrupt reason */ 202 #define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ 203 #define ATA_I_IN 0x02 /* read (1) | write (0) */ 204 #define ATA_I_RELEASE 0x04 /* released bus (1) */ 205 #define ATA_I_TAGMASK 0xf8 /* tag mask */ 206 #define ATA_SECTOR 0x10c /* (RW) sector # */ 207 #define ATA_CYL_LSB 0x110 /* (RW) cylinder# LSB */ 208 #define ATA_CYL_MSB 0x114 /* (RW) cylinder# MSB */ 209 #define ATA_DRIVE 0x118 /* (W) Sector/Drive/Head */ 210 #define ATA_D_LBA 0x40 /* use LBA addressing */ 211 #define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ 212 #define ATA_COMMAND 0x11c /* (W) command */ 213 #define ATA_STATUS 0x11c /* (R) status */ 214 #define ATA_S_ERROR 0x01 /* error */ 215 #define ATA_S_INDEX 0x02 /* index */ 216 #define ATA_S_CORR 0x04 /* data corrected */ 217 #define ATA_S_DRQ 0x08 /* data request */ 218 #define ATA_S_DSC 0x10 /* drive seek completed */ 219 #define ATA_S_SERVICE 0x10 /* drive needs service */ 220 #define ATA_S_DWF 0x20 /* drive write fault */ 221 #define ATA_S_DMA 0x20 /* DMA ready */ 222 #define ATA_S_READY 0x40 /* drive ready */ 223 #define ATA_S_BUSY 0x80 /* busy */ 224 #define ATA_CONTROL 0x120 /* (W) control */ 225 #define ATA_A_IDS 0x02 /* disable interrupts */ 226 #define ATA_A_RESET 0x04 /* RESET controller */ 227 #define ATA_A_4BIT 0x08 /* 4 head bits */ 228 #define ATA_A_HOB 0x80 /* High Order Byte enable */ 229 #define ATA_ALTSTAT 0x120 /* (R) alternate status */ 230 #define ATAPI_P_READ (ATA_S_DRQ | ATA_I_IN) 231 #define ATAPI_P_WRITE (ATA_S_DRQ) 232 #define ATAPI_P_CMDOUT (ATA_S_DRQ | ATA_I_CMD) 233 #define ATAPI_P_DONEDRQ (ATA_S_DRQ | ATA_I_CMD | ATA_I_IN) 234 #define ATAPI_P_DONE (ATA_I_CMD | ATA_I_IN) 235 #define ATAPI_P_ABORT 0 236 237 /* Basic DMA Registers */ 238 #define DMA_C 0x224 /* Basic DMA Command */ 239 #define DMA_C_START (1 << 0) 240 #define DMA_C_READ (1 << 3) 241 #define DMA_C_DREGIONVALID (1 << 8) 242 #define DMA_C_DREGIONLAST (1 << 9) 243 #define DMA_C_CONTFROMPREV (1 << 10) 244 #define DMA_C_DRBC(n) (((n) & 0xffff) << 16) 245 #define DMA_S 0x228 /* Basic DMA Status */ 246 #define DMA_S_ACT (1 << 0) /* Active */ 247 #define DMA_S_ERR (1 << 1) /* Error */ 248 #define DMA_S_PAUSED (1 << 2) /* Paused */ 249 #define DMA_S_LAST (1 << 3) /* Last */ 250 #define DMA_DTLBA 0x22c /* Descriptor Table Low Base Address */ 251 #define DMA_DTLBA_MASK 0xfffffff0 252 #define DMA_DTHBA 0x230 /* Descriptor Table High Base Address */ 253 #define DMA_DRLA 0x234 /* Data Region Low Address */ 254 #define DMA_DRHA 0x238 /* Data Region High Address */ 255 256 /* Serial-ATA Registers */ 257 #define SATA_SS 0x300 /* SStatus */ 258 #define SATA_SS_DET_MASK 0x0000000f 259 #define SATA_SS_DET_NO_DEVICE 0x00000000 260 #define SATA_SS_DET_DEV_PRESENT 0x00000001 261 #define SATA_SS_DET_PHY_ONLINE 0x00000003 262 #define SATA_SS_DET_PHY_OFFLINE 0x00000004 263 264 #define SATA_SS_SPD_MASK 0x000000f0 265 #define SATA_SS_SPD_NO_SPEED 0x00000000 266 #define SATA_SS_SPD_GEN1 0x00000010 267 #define SATA_SS_SPD_GEN2 0x00000020 268 #define SATA_SS_SPD_GEN3 0x00000030 269 270 #define SATA_SS_IPM_MASK 0x00000f00 271 #define SATA_SS_IPM_NO_DEVICE 0x00000000 272 #define SATA_SS_IPM_ACTIVE 0x00000100 273 #define SATA_SS_IPM_PARTIAL 0x00000200 274 #define SATA_SS_IPM_SLUMBER 0x00000600 275 #define SATA_SE 0x304 /* SError */ 276 #define SATA_SEIM 0x340 /* SError Interrupt Mask */ 277 #define SATA_SE_DATA_CORRECTED 0x00000001 278 #define SATA_SE_COMM_CORRECTED 0x00000002 279 #define SATA_SE_DATA_ERR 0x00000100 280 #define SATA_SE_COMM_ERR 0x00000200 281 #define SATA_SE_PROT_ERR 0x00000400 282 #define SATA_SE_HOST_ERR 0x00000800 283 #define SATA_SE_PHY_CHANGED 0x00010000 284 #define SATA_SE_PHY_IERROR 0x00020000 285 #define SATA_SE_COMM_WAKE 0x00040000 286 #define SATA_SE_DECODE_ERR 0x00080000 287 #define SATA_SE_PARITY_ERR 0x00100000 288 #define SATA_SE_CRC_ERR 0x00200000 289 #define SATA_SE_HANDSHAKE_ERR 0x00400000 290 #define SATA_SE_LINKSEQ_ERR 0x00800000 291 #define SATA_SE_TRANSPORT_ERR 0x01000000 292 #define SATA_SE_UNKNOWN_FIS 0x02000000 293 #define SATA_SC 0x308 /* SControl */ 294 #define SATA_SC_DET_MASK 0x0000000f 295 #define SATA_SC_DET_IDLE 0x00000000 296 #define SATA_SC_DET_RESET 0x00000001 297 #define SATA_SC_DET_DISABLE 0x00000004 298 299 #define SATA_SC_SPD_MASK 0x000000f0 300 #define SATA_SC_SPD_NO_SPEED 0x00000000 301 #define SATA_SC_SPD_SPEED_GEN1 0x00000010 302 #define SATA_SC_SPD_SPEED_GEN2 0x00000020 303 #define SATA_SC_SPD_SPEED_GEN3 0x00000030 304 305 #define SATA_SC_IPM_MASK 0x00000f00 306 #define SATA_SC_IPM_NONE 0x00000000 307 #define SATA_SC_IPM_DIS_PARTIAL 0x00000100 308 #define SATA_SC_IPM_DIS_SLUMBER 0x00000200 309 310 #define SATA_SC_SPM_MASK 0x0000f000 311 #define SATA_SC_SPM_NONE 0x00000000 312 #define SATA_SC_SPM_PARTIAL 0x00001000 313 #define SATA_SC_SPM_SLUMBER 0x00002000 314 #define SATA_SC_SPM_ACTIVE 0x00004000 315 #define SATA_LTM 0x30c /* LTMode */ 316 #define SATA_PHYM3 0x310 /* PHY Mode 3 */ 317 #define SATA_PHYM4 0x314 /* PHY Mode 4 */ 318 #define SATA_PHYM1 0x32c /* PHY Mode 1 */ 319 #define SATA_PHYM2 0x330 /* PHY Mode 2 */ 320 #define SATA_BISTC 0x334 /* BIST Control */ 321 #define SATA_BISTDW1 0x338 /* BIST DW1 */ 322 #define SATA_BISTDW2 0x33c /* BIST DW2 */ 323 #define SATA_SATAICFG 0x050 /* Serial-ATA Interface Configuration */ 324 #define SATA_SATAICFG_REFCLKCNF_20MHZ (0 << 0) 325 #define SATA_SATAICFG_REFCLKCNF_25MHZ (1 << 0) 326 #define SATA_SATAICFG_REFCLKCNF_30MHZ (2 << 0) 327 #define SATA_SATAICFG_REFCLKCNF_40MHZ (3 << 0) 328 #define SATA_SATAICFG_REFCLKCNF_MASK (3 << 0) 329 #define SATA_SATAICFG_REFCLKDIV_1 (0 << 2) 330 #define SATA_SATAICFG_REFCLKDIV_2 (1 << 2) /* Used 20 or 25MHz */ 331 #define SATA_SATAICFG_REFCLKDIV_4 (2 << 2) /* Used 40MHz */ 332 #define SATA_SATAICFG_REFCLKDIV_3 (3 << 2) /* Used 30MHz */ 333 #define SATA_SATAICFG_REFCLKDIV_MASK (3 << 2) 334 #define SATA_SATAICFG_REFCLKFEEDDIV_50 (0 << 4) /* or 100, when Gen2En is 1 */ 335 #define SATA_SATAICFG_REFCLKFEEDDIV_60 (1 << 4) /* or 120. Used 25MHz */ 336 #define SATA_SATAICFG_REFCLKFEEDDIV_75 (2 << 4) /* or 150. Used 20MHz */ 337 #define SATA_SATAICFG_REFCLKFEEDDIV_90 (3 << 4) /* or 180 */ 338 #define SATA_SATAICFG_REFCLKFEEDDIV_MASK (3 << 4) 339 #define SATA_SATAICFG_PHYSSCEN (1 << 6) 340 #define SATA_SATAICFG_GEN2EN (1 << 7) 341 #define SATA_SATAICFG_COMMEN (1 << 8) 342 #define SATA_SATAICFG_PHYSHUTDOWN (1 << 9) 343 #define SATA_SATAICFG_TARGETMODE (1 << 10) /* 1 = Initiator */ 344 #define SATA_SATAICFG_COMCHANNEL (1 << 11) 345 #define SATA_SATAICFG_IGNOREBSY (1 << 24) 346 #define SATA_SATAICFG_LINKRSTEN (1 << 25) 347 #define SATA_SATAICFG_CMDRETXDS (1 << 26) 348 #define SATA_SATAICTL 0x344 /* Serial-ATA Interface Control */ 349 #define SATA_SATAICTL_PMPTX_MASK 0x0000000f 350 #define SATA_SATAICTL_PMPTX_SHIFT 0 351 #define SATA_SATAICTL_VUM (1 << 8) 352 #define SATA_SATAICTL_VUS (1 << 9) 353 #define SATA_SATAICTL_EDMAACT (1 << 16) 354 #define SATA_SATAICTL_CLEARSTAT (1 << 24) 355 #define SATA_SATAICTL_SRST (1 << 25) 356 #define SATA_SATAITC 0x348 /* Serial-ATA Interface Test Control */ 357 #define SATA_SATAIS 0x34c /* Serial-ATA Interface Status */ 358 #define SATA_VU 0x35c /* Vendor Unique */ 359 #define SATA_FISC 0x360 /* FIS Configuration */ 360 #define SATA_FISC_FISWAIT4RDYEN_B0 (1 << 0) /* Device to Host FIS */ 361 #define SATA_FISC_FISWAIT4RDYEN_B1 (1 << 1) /* SDB FIS rcv with <N>bit 0 */ 362 #define SATA_FISC_FISWAIT4RDYEN_B2 (1 << 2) /* DMA Activate FIS */ 363 #define SATA_FISC_FISWAIT4RDYEN_B3 (1 << 3) /* DMA Setup FIS */ 364 #define SATA_FISC_FISWAIT4RDYEN_B4 (1 << 4) /* Data FIS first DW */ 365 #define SATA_FISC_FISWAIT4RDYEN_B5 (1 << 5) /* Data FIS entire FIS */ 366 #define SATA_FISC_FISWAIT4HOSTRDYEN_B0 (1 << 8) 367 /* Device to Host FIS with <ERR> or <DF> */ 368 #define SATA_FISC_FISWAIT4HOSTRDYEN_B1 (1 << 9) /* SDB FIS rcv with <N>bit */ 369 #define SATA_FISC_FISWAIT4HOSTRDYEN_B2 (1 << 10) /* SDB FIS rcv with <ERR> */ 370 #define SATA_FISC_FISWAIT4HOSTRDYEN_B3 (1 << 11) /* BIST Acivate FIS */ 371 #define SATA_FISC_FISWAIT4HOSTRDYEN_B4 (1 << 12) /* PIO Setup FIS */ 372 #define SATA_FISC_FISWAIT4HOSTRDYEN_B5 (1 << 13) /* Data FIS with Link error */ 373 #define SATA_FISC_FISWAIT4HOSTRDYEN_B6 (1 << 14) /* Unrecognized FIS type */ 374 #define SATA_FISC_FISWAIT4HOSTRDYEN_B7 (1 << 15) /* Any FIS */ 375 #define SATA_FISC_FISDMAACTIVATESYNCRESP (1 << 16) 376 #define SATA_FISC_FISUNRECTYPECONT (1 << 17) 377 #define SATA_FISIC 0x364 /* FIS Interrupt Cause */ 378 #define SATA_FISIM 0x368 /* FIS Interrupt Mask */ 379 #define SATA_FISDW0 0x370 /* FIS DW0 */ 380 #define SATA_FISDW1 0x374 /* FIS DW1 */ 381 #define SATA_FISDW2 0x378 /* FIS DW2 */ 382 #define SATA_FISDW3 0x37c /* FIS DW3 */ 383 #define SATA_FISDW4 0x380 /* FIS DW4 */ 384 #define SATA_FISDW5 0x384 /* FIS DW5 */ 385 #define SATA_FISDW6 0x388 /* FIS DW6 */ 386 387 #define SATA_PHYM9_GEN2 0x398 388 #define SATA_PHYM9_GEN1 0x39c 389 #define SATA_PHYCFG_OFS 0x3a0 /* 65nm SoCs only */ 390 391 #define MVS_MAX_PORTS 8 392 #define MVS_MAX_SLOTS 32 393 394 /* Pessimistic prognosis on number of required S/G entries */ 395 #define MVS_SG_ENTRIES (btoc(MAXPHYS) + 1) 396 397 /* EDMA Command Request Block (CRQB) Data */ 398 struct mvs_crqb { 399 uint32_t cprdbl; /* cPRD Desriptor Table Base Low Address */ 400 uint32_t cprdbh; /* cPRD Desriptor Table Base High Address */ 401 uint16_t ctrlflg; /* Control Flags */ 402 #define MVS_CRQB_READ 0x0001 403 #define MVS_CRQB_TAG_MASK 0x003e 404 #define MVS_CRQB_TAG_SHIFT 1 405 #define MVS_CRQB_PMP_MASK 0xf000 406 #define MVS_CRQB_PMP_SHIFT 12 407 uint8_t cmd[22]; 408 } __packed; 409 410 struct mvs_crqb_gen2e { 411 uint32_t cprdbl; /* cPRD Desriptor Table Base Low Address */ 412 uint32_t cprdbh; /* cPRD Desriptor Table Base High Address */ 413 uint32_t ctrlflg; /* Control Flags */ 414 #define MVS_CRQB2E_READ 0x00000001 415 #define MVS_CRQB2E_DTAG_MASK 0x0000003e 416 #define MVS_CRQB2E_DTAG_SHIFT 1 417 #define MVS_CRQB2E_PMP_MASK 0x0000f000 418 #define MVS_CRQB2E_PMP_SHIFT 12 419 #define MVS_CRQB2E_CPRD 0x00010000 420 #define MVS_CRQB2E_HTAG_MASK 0x003e0000 421 #define MVS_CRQB2E_HTAG_SHIFT 17 422 uint32_t drbc; /* Data Region Byte Count */ 423 uint8_t cmd[16]; 424 } __packed; 425 426 /* EDMA Phisical Region Descriptors (ePRD) Table Data Structure */ 427 struct mvs_eprd { 428 uint32_t prdbal; /* Address bits[31:1] */ 429 uint32_t bytecount; /* Byte Count */ 430 #define MVS_EPRD_MASK 0x0000ffff /* max 64KB */ 431 #define MVS_EPRD_MAX (MVS_EPRD_MASK + 1) 432 #define MVS_EPRD_EOF 0x80000000 433 uint32_t prdbah; /* Address bits[63:32] */ 434 uint32_t resv; 435 } __packed; 436 437 /* Command request blocks. 32 commands. First 1Kbyte aligned. */ 438 #define MVS_CRQB_OFFSET 0 439 #define MVS_CRQB_SIZE 32 /* sizeof(struct mvs_crqb) */ 440 #define MVS_CRQB_MASK 0x000003e0 441 #define MVS_CRQB_SHIFT 5 442 #define MVS_CRQB_TO_ADDR(slot) ((slot) << MVS_CRQB_SHIFT) 443 #define MVS_ADDR_TO_CRQB(addr) (((addr) & MVS_CRQB_MASK) >> MVS_CRQB_SHIFT) 444 /* ePRD blocks. Up to 32 commands, Each 16byte aligned. */ 445 #define MVS_EPRD_OFFSET (MVS_CRQB_OFFSET + MVS_CRQB_SIZE * MVS_MAX_SLOTS) 446 #define MVS_EPRD_SIZE (MVS_SG_ENTRIES * 16) /* sizeof(struct mvs_eprd) */ 447 /* Request work area. */ 448 #define MVS_WORKRQ_SIZE (MVS_EPRD_OFFSET + MVS_EPRD_SIZE * MVS_MAX_SLOTS) 449 450 /* EDMA Command Response Block (CRPB) Data */ 451 struct mvs_crpb { 452 uint16_t id; /* CRPB ID */ 453 #define MVS_CRPB_TAG_MASK 0x001F 454 #define MVS_CRPB_TAG_SHIFT 0 455 uint16_t rspflg; /* CPRB Response Flags */ 456 #define MVS_CRPB_EDMASTS_MASK 0x007F 457 #define MVS_CRPB_EDMASTS_SHIFT 0 458 #define MVS_CRPB_ATASTS_MASK 0xFF00 459 #define MVS_CRPB_ATASTS_SHIFT 8 460 uint32_t ts; /* CPRB Time Stamp */ 461 } __packed; 462 463 /* Command response blocks. 32 commands. First 256byte aligned. */ 464 #define MVS_CRPB_OFFSET 0 465 #define MVS_CRPB_SIZE sizeof(struct mvs_crpb) 466 #define MVS_CRPB_MASK 0x000000f8 467 #define MVS_CRPB_SHIFT 3 468 #define MVS_CRPB_TO_ADDR(slot) ((slot) << MVS_CRPB_SHIFT) 469 #define MVS_ADDR_TO_CRPB(addr) (((addr) & MVS_CRPB_MASK) >> MVS_CRPB_SHIFT) 470 /* Request work area. */ 471 #define MVS_WORKRP_SIZE (MVS_CRPB_OFFSET + MVS_CRPB_SIZE * MVS_MAX_SLOTS) 472 473 /* misc defines */ 474 #define ATA_IRQ_RID 0 475 #define ATA_INTR_FLAGS (INTR_MPSAFE|INTR_TYPE_BIO|INTR_ENTROPY) 476 477 struct ata_dmaslot { 478 bus_dmamap_t data_map; /* Data DMA map */ 479 bus_addr_t addr; /* Data address */ 480 uint16_t len; /* Data size */ 481 }; 482 483 /* structure holding DMA related information */ 484 struct mvs_dma { 485 bus_dma_tag_t workrq_tag; /* Request workspace DMA tag */ 486 bus_dmamap_t workrq_map; /* Request workspace DMA map */ 487 uint8_t *workrq; /* Request workspace */ 488 bus_addr_t workrq_bus; /* Request bus address */ 489 bus_dma_tag_t workrp_tag; /* Reply workspace DMA tag */ 490 bus_dmamap_t workrp_map; /* Reply workspace DMA map */ 491 uint8_t *workrp; /* Reply workspace */ 492 bus_addr_t workrp_bus; /* Reply bus address */ 493 bus_dma_tag_t data_tag; /* Data DMA tag */ 494 }; 495 496 enum mvs_slot_states { 497 MVS_SLOT_EMPTY, 498 MVS_SLOT_LOADING, 499 MVS_SLOT_RUNNING, 500 MVS_SLOT_EXECUTING 501 }; 502 503 struct mvs_slot { 504 device_t dev; /* Device handle */ 505 int slot; /* Number of this slot */ 506 int tag; /* Used command tag */ 507 enum mvs_slot_states state; /* Slot state */ 508 union ccb *ccb; /* CCB occupying slot */ 509 struct ata_dmaslot dma; /* DMA data of this slot */ 510 struct callout timeout; /* Execution timeout */ 511 }; 512 513 struct mvs_device { 514 int revision; 515 int mode; 516 u_int bytecount; 517 u_int atapi; 518 u_int tags; 519 u_int caps; 520 }; 521 522 enum mvs_edma_mode { 523 MVS_EDMA_UNKNOWN, 524 MVS_EDMA_OFF, 525 MVS_EDMA_ON, 526 MVS_EDMA_QUEUED, 527 MVS_EDMA_NCQ, 528 }; 529 530 /* structure describing an ATA channel */ 531 struct mvs_channel { 532 device_t dev; /* Device handle */ 533 int unit; /* Physical channel */ 534 struct resource *r_mem; /* Memory of this channel */ 535 struct resource *r_irq; /* Interrupt of this channel */ 536 void *ih; /* Interrupt handle */ 537 struct mvs_dma dma; /* DMA data */ 538 struct cam_sim *sim; 539 struct cam_path *path; 540 int quirks; 541 #define MVS_Q_GENI 1 542 #define MVS_Q_GENII 2 543 #define MVS_Q_GENIIE 4 544 #define MVS_Q_SOC 8 545 #define MVS_Q_CT 16 546 #define MVS_Q_SOC65 32 547 int pm_level; /* power management level */ 548 549 struct mvs_slot slot[MVS_MAX_SLOTS]; 550 union ccb *hold[MVS_MAX_SLOTS]; 551 int holdtag[MVS_MAX_SLOTS]; /* Tags used for held commands. */ 552 struct mtx mtx; /* state lock */ 553 int devices; /* What is present */ 554 int pm_present; /* PM presence reported */ 555 enum mvs_edma_mode curr_mode; /* Current EDMA mode */ 556 int fbs_enabled; /* FIS-based switching enabled */ 557 uint32_t oslots; /* Occupied slots */ 558 uint32_t otagspd[16]; /* Occupied device tags */ 559 uint32_t rslots; /* Running slots */ 560 uint32_t aslots; /* Slots with atomic commands */ 561 uint32_t eslots; /* Slots in error */ 562 uint32_t toslots; /* Slots in timeout */ 563 int numrslots; /* Number of running slots */ 564 int numrslotspd[16];/* Number of running slots per dev */ 565 int numpslots; /* Number of PIO slots */ 566 int numdslots; /* Number of DMA slots */ 567 int numtslots; /* Number of NCQ slots */ 568 int numtslotspd[16];/* Number of NCQ slots per dev */ 569 int numhslots; /* Number of held slots */ 570 int recoverycmd; /* Our READ LOG active */ 571 int fatalerr; /* Fatal error happened */ 572 int lastslot; /* Last used slot */ 573 int taggedtarget; /* Last tagged target */ 574 int resetting; /* Hard-reset in progress. */ 575 int resetpolldiv; /* Hard-reset poll divider. */ 576 int out_idx; /* Next written CRQB */ 577 int in_idx; /* Next read CRPB */ 578 u_int transfersize; /* PIO transfer size */ 579 u_int donecount; /* PIO bytes sent/received */ 580 u_int basic_dma; /* Basic DMA used for ATAPI */ 581 u_int fake_busy; /* Fake busy bit after command submission */ 582 union ccb *frozen; /* Frozen command */ 583 struct callout pm_timer; /* Power management events */ 584 struct callout reset_timer; /* Hard-reset timeout */ 585 586 struct mvs_device user[16]; /* User-specified settings */ 587 struct mvs_device curr[16]; /* Current settings */ 588 }; 589 590 /* structure describing a MVS controller */ 591 struct mvs_controller { 592 device_t dev; 593 int r_rid; 594 struct resource *r_mem; 595 struct rman sc_iomem; 596 struct mvs_controller_irq { 597 struct resource *r_irq; 598 void *handle; 599 int r_irq_rid; 600 } irq; 601 int quirks; 602 int channels; 603 int ccc; /* CCC timeout */ 604 int cccc; /* CCC commands */ 605 struct mtx mtx; /* MIM access lock */ 606 int gmim; /* Globally wanted MIM bits */ 607 int pmim; /* Port wanted MIM bits */ 608 int mim; /* Current MIM bits */ 609 int msi; /* MSI enabled */ 610 int msia; /* MSI active */ 611 struct { 612 void (*function)(void *); 613 void *argument; 614 } interrupt[MVS_MAX_PORTS]; 615 }; 616 617 enum mvs_err_type { 618 MVS_ERR_NONE, /* No error */ 619 MVS_ERR_INVALID, /* Error detected by us before submitting. */ 620 MVS_ERR_INNOCENT, /* Innocent victim. */ 621 MVS_ERR_TFE, /* Task File Error. */ 622 MVS_ERR_SATA, /* SATA error. */ 623 MVS_ERR_TIMEOUT, /* Command execution timeout. */ 624 MVS_ERR_NCQ, /* NCQ command error. CCB should be put on hold 625 * until READ LOG executed to reveal error. */ 626 }; 627 628 struct mvs_intr_arg { 629 void *arg; 630 u_int cause; 631 }; 632 633 extern devclass_t mvs_devclass; 634 635 /* macros to hide busspace uglyness */ 636 #define ATA_INB(res, offset) \ 637 bus_read_1((res), (offset)) 638 #define ATA_INW(res, offset) \ 639 bus_read_2((res), (offset)) 640 #define ATA_INL(res, offset) \ 641 bus_read_4((res), (offset)) 642 #define ATA_INSW(res, offset, addr, count) \ 643 bus_read_multi_2((res), (offset), (addr), (count)) 644 #define ATA_INSW_STRM(res, offset, addr, count) \ 645 bus_read_multi_stream_2((res), (offset), (addr), (count)) 646 #define ATA_INSL(res, offset, addr, count) \ 647 bus_read_multi_4((res), (offset), (addr), (count)) 648 #define ATA_INSL_STRM(res, offset, addr, count) \ 649 bus_read_multi_stream_4((res), (offset), (addr), (count)) 650 #define ATA_OUTB(res, offset, value) \ 651 bus_write_1((res), (offset), (value)) 652 #define ATA_OUTW(res, offset, value) \ 653 bus_write_2((res), (offset), (value)) 654 #define ATA_OUTL(res, offset, value) \ 655 bus_write_4((res), (offset), (value)); 656 #define ATA_OUTSW(res, offset, addr, count) \ 657 bus_write_multi_2((res), (offset), (addr), (count)) 658 #define ATA_OUTSW_STRM(res, offset, addr, count) \ 659 bus_write_multi_stream_2((res), (offset), (addr), (count)) 660 #define ATA_OUTSL(res, offset, addr, count) \ 661 bus_write_multi_4((res), (offset), (addr), (count)) 662 #define ATA_OUTSL_STRM(res, offset, addr, count) \ 663 bus_write_multi_stream_4((res), (offset), (addr), (count)) 664