1 /* 2 * Copyright (c) 2015, AVAGO Tech. All rights reserved. Author: Marian Choy 3 * Copyright (c) 2014, LSI Corp. All rights reserved. Author: Marian Choy 4 * Support: freebsdraid@avagotech.com 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are 8 * met: 9 * 10 * 1. Redistributions of source code must retain the above copyright notice, 11 * this list of conditions and the following disclaimer. 2. Redistributions 12 * in binary form must reproduce the above copyright notice, this list of 13 * conditions and the following disclaimer in the documentation and/or other 14 * materials provided with the distribution. 3. Neither the name of the 15 * <ORGANIZATION> nor the names of its contributors may be used to endorse or 16 * promote products derived from this software without specific prior written 17 * permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 * 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 #include "dev/mrsas/mrsas.h" 37 38 #include <cam/cam.h> 39 #include <cam/cam_ccb.h> 40 #include <cam/cam_sim.h> 41 #include <cam/cam_xpt_sim.h> 42 #include <cam/cam_debug.h> 43 #include <cam/cam_periph.h> 44 #include <cam/cam_xpt_periph.h> 45 46 #include <cam/scsi/scsi_all.h> 47 #include <cam/scsi/scsi_message.h> 48 #include <sys/taskqueue.h> 49 #include <sys/kernel.h> 50 51 52 #include <sys/time.h> /* XXX for pcpu.h */ 53 #include <sys/pcpu.h> /* XXX for PCPU_GET */ 54 55 #define smp_processor_id() PCPU_GET(cpuid) 56 57 /* 58 * Function prototypes 59 */ 60 int mrsas_cam_attach(struct mrsas_softc *sc); 61 int mrsas_find_io_type(struct cam_sim *sim, union ccb *ccb); 62 int mrsas_bus_scan(struct mrsas_softc *sc); 63 int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim); 64 int 65 mrsas_map_request(struct mrsas_softc *sc, 66 struct mrsas_mpt_cmd *cmd, union ccb *ccb); 67 int 68 mrsas_build_ldio_rw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 69 union ccb *ccb); 70 int 71 mrsas_build_ldio_nonrw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 72 union ccb *ccb); 73 int 74 mrsas_build_syspdio(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 75 union ccb *ccb, struct cam_sim *sim, u_int8_t fp_possible); 76 int 77 mrsas_setup_io(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 78 union ccb *ccb, u_int32_t device_id, 79 MRSAS_RAID_SCSI_IO_REQUEST * io_request); 80 void mrsas_xpt_freeze(struct mrsas_softc *sc); 81 void mrsas_xpt_release(struct mrsas_softc *sc); 82 void mrsas_cam_detach(struct mrsas_softc *sc); 83 void mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd); 84 void mrsas_unmap_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd); 85 void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd); 86 void 87 mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo, 88 u_int32_t req_desc_hi); 89 void 90 mrsas_set_pd_lba(MRSAS_RAID_SCSI_IO_REQUEST * io_request, 91 u_int8_t cdb_len, struct IO_REQUEST_INFO *io_info, union ccb *ccb, 92 MR_DRV_RAID_MAP_ALL * local_map_ptr, u_int32_t ref_tag, 93 u_int32_t ld_block_size); 94 static void mrsas_freeze_simq(struct mrsas_mpt_cmd *cmd, struct cam_sim *sim); 95 static void mrsas_cam_poll(struct cam_sim *sim); 96 static void mrsas_action(struct cam_sim *sim, union ccb *ccb); 97 static void mrsas_scsiio_timeout(void *data); 98 static int mrsas_track_scsiio(struct mrsas_softc *sc, target_id_t id, u_int32_t bus_id); 99 static void mrsas_tm_response_code(struct mrsas_softc *sc, 100 MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply); 101 static int mrsas_issue_tm(struct mrsas_softc *sc, 102 MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc); 103 static void 104 mrsas_data_load_cb(void *arg, bus_dma_segment_t *segs, 105 int nseg, int error); 106 static int32_t 107 mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim, 108 union ccb *ccb); 109 struct mrsas_mpt_cmd *mrsas_get_mpt_cmd(struct mrsas_softc *sc); 110 MRSAS_REQUEST_DESCRIPTOR_UNION * 111 mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index); 112 113 extern void 114 mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status, 115 u_int8_t extStatus); 116 extern int mrsas_reset_targets(struct mrsas_softc *sc); 117 extern u_int16_t MR_TargetIdToLdGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map); 118 extern u_int32_t 119 MR_LdBlockSizeGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map); 120 extern void mrsas_isr(void *arg); 121 extern void mrsas_aen_handler(struct mrsas_softc *sc); 122 extern u_int8_t 123 MR_BuildRaidContext(struct mrsas_softc *sc, 124 struct IO_REQUEST_INFO *io_info, RAID_CONTEXT * pRAID_Context, 125 MR_DRV_RAID_MAP_ALL * map); 126 extern u_int16_t 127 MR_LdSpanArrayGet(u_int32_t ld, u_int32_t span, 128 MR_DRV_RAID_MAP_ALL * map); 129 extern u_int16_t 130 mrsas_get_updated_dev_handle(struct mrsas_softc *sc, 131 PLD_LOAD_BALANCE_INFO lbInfo, struct IO_REQUEST_INFO *io_info); 132 extern u_int8_t 133 megasas_get_best_arm(PLD_LOAD_BALANCE_INFO lbInfo, u_int8_t arm, 134 u_int64_t block, u_int32_t count); 135 extern int mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex); 136 extern MR_LD_RAID *MR_LdRaidGet(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map); 137 extern void mrsas_disable_intr(struct mrsas_softc *sc); 138 extern void mrsas_enable_intr(struct mrsas_softc *sc); 139 140 141 /* 142 * mrsas_cam_attach: Main entry to CAM subsystem 143 * input: Adapter instance soft state 144 * 145 * This function is called from mrsas_attach() during initialization to perform 146 * SIM allocations and XPT bus registration. If the kernel version is 7.4 or 147 * earlier, it would also initiate a bus scan. 148 */ 149 int 150 mrsas_cam_attach(struct mrsas_softc *sc) 151 { 152 struct cam_devq *devq; 153 int mrsas_cam_depth; 154 155 mrsas_cam_depth = sc->max_fw_cmds - MRSAS_INTERNAL_CMDS; 156 157 if ((devq = cam_simq_alloc(mrsas_cam_depth)) == NULL) { 158 device_printf(sc->mrsas_dev, "Cannot allocate SIM queue\n"); 159 return (ENOMEM); 160 } 161 /* 162 * Create SIM for bus 0 and register, also create path 163 */ 164 sc->sim_0 = cam_sim_alloc(mrsas_action, mrsas_cam_poll, "mrsas", sc, 165 device_get_unit(sc->mrsas_dev), &sc->sim_lock, mrsas_cam_depth, 166 mrsas_cam_depth, devq); 167 if (sc->sim_0 == NULL) { 168 cam_simq_free(devq); 169 device_printf(sc->mrsas_dev, "Cannot register SIM\n"); 170 return (ENXIO); 171 } 172 /* Initialize taskqueue for Event Handling */ 173 TASK_INIT(&sc->ev_task, 0, (void *)mrsas_aen_handler, sc); 174 sc->ev_tq = taskqueue_create("mrsas_taskq", M_NOWAIT | M_ZERO, 175 taskqueue_thread_enqueue, &sc->ev_tq); 176 177 /* Run the task queue with lowest priority */ 178 taskqueue_start_threads(&sc->ev_tq, 1, 255, "%s taskq", 179 device_get_nameunit(sc->mrsas_dev)); 180 mtx_lock(&sc->sim_lock); 181 if (xpt_bus_register(sc->sim_0, sc->mrsas_dev, 0) != CAM_SUCCESS) { 182 cam_sim_free(sc->sim_0, TRUE); /* passing true frees the devq */ 183 mtx_unlock(&sc->sim_lock); 184 return (ENXIO); 185 } 186 if (xpt_create_path(&sc->path_0, NULL, cam_sim_path(sc->sim_0), 187 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 188 xpt_bus_deregister(cam_sim_path(sc->sim_0)); 189 cam_sim_free(sc->sim_0, TRUE); /* passing true will free the 190 * devq */ 191 mtx_unlock(&sc->sim_lock); 192 return (ENXIO); 193 } 194 mtx_unlock(&sc->sim_lock); 195 196 /* 197 * Create SIM for bus 1 and register, also create path 198 */ 199 sc->sim_1 = cam_sim_alloc(mrsas_action, mrsas_cam_poll, "mrsas", sc, 200 device_get_unit(sc->mrsas_dev), &sc->sim_lock, mrsas_cam_depth, 201 mrsas_cam_depth, devq); 202 if (sc->sim_1 == NULL) { 203 cam_simq_free(devq); 204 device_printf(sc->mrsas_dev, "Cannot register SIM\n"); 205 return (ENXIO); 206 } 207 mtx_lock(&sc->sim_lock); 208 if (xpt_bus_register(sc->sim_1, sc->mrsas_dev, 1) != CAM_SUCCESS) { 209 cam_sim_free(sc->sim_1, TRUE); /* passing true frees the devq */ 210 mtx_unlock(&sc->sim_lock); 211 return (ENXIO); 212 } 213 if (xpt_create_path(&sc->path_1, NULL, cam_sim_path(sc->sim_1), 214 CAM_TARGET_WILDCARD, 215 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 216 xpt_bus_deregister(cam_sim_path(sc->sim_1)); 217 cam_sim_free(sc->sim_1, TRUE); 218 mtx_unlock(&sc->sim_lock); 219 return (ENXIO); 220 } 221 mtx_unlock(&sc->sim_lock); 222 223 #if (__FreeBSD_version <= 704000) 224 if (mrsas_bus_scan(sc)) { 225 device_printf(sc->mrsas_dev, "Error in bus scan.\n"); 226 return (1); 227 } 228 #endif 229 return (0); 230 } 231 232 /* 233 * mrsas_cam_detach: De-allocates and teardown CAM 234 * input: Adapter instance soft state 235 * 236 * De-registers and frees the paths and SIMs. 237 */ 238 void 239 mrsas_cam_detach(struct mrsas_softc *sc) 240 { 241 if (sc->ev_tq != NULL) 242 taskqueue_free(sc->ev_tq); 243 mtx_lock(&sc->sim_lock); 244 if (sc->path_0) 245 xpt_free_path(sc->path_0); 246 if (sc->sim_0) { 247 xpt_bus_deregister(cam_sim_path(sc->sim_0)); 248 cam_sim_free(sc->sim_0, FALSE); 249 } 250 if (sc->path_1) 251 xpt_free_path(sc->path_1); 252 if (sc->sim_1) { 253 xpt_bus_deregister(cam_sim_path(sc->sim_1)); 254 cam_sim_free(sc->sim_1, TRUE); 255 } 256 mtx_unlock(&sc->sim_lock); 257 } 258 259 /* 260 * mrsas_action: SIM callback entry point 261 * input: pointer to SIM pointer to CAM Control Block 262 * 263 * This function processes CAM subsystem requests. The type of request is stored 264 * in ccb->ccb_h.func_code. The preprocessor #ifdef is necessary because 265 * ccb->cpi.maxio is not supported for FreeBSD version 7.4 or earlier. 266 */ 267 static void 268 mrsas_action(struct cam_sim *sim, union ccb *ccb) 269 { 270 struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim); 271 struct ccb_hdr *ccb_h = &(ccb->ccb_h); 272 u_int32_t device_id; 273 274 /* 275 * Check if the system going down 276 * or the adapter is in unrecoverable critical error 277 */ 278 if (sc->remove_in_progress || 279 (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)) { 280 ccb->ccb_h.status |= CAM_DEV_NOT_THERE; 281 xpt_done(ccb); 282 return; 283 } 284 285 switch (ccb->ccb_h.func_code) { 286 case XPT_SCSI_IO: 287 { 288 device_id = ccb_h->target_id; 289 290 /* 291 * bus 0 is LD, bus 1 is for system-PD 292 */ 293 if (cam_sim_bus(sim) == 1 && 294 sc->pd_list[device_id].driveState != MR_PD_STATE_SYSTEM) { 295 ccb->ccb_h.status |= CAM_DEV_NOT_THERE; 296 xpt_done(ccb); 297 } else { 298 if (mrsas_startio(sc, sim, ccb)) { 299 ccb->ccb_h.status |= CAM_REQ_INVALID; 300 xpt_done(ccb); 301 } 302 } 303 break; 304 } 305 case XPT_ABORT: 306 { 307 ccb->ccb_h.status = CAM_UA_ABORT; 308 xpt_done(ccb); 309 break; 310 } 311 case XPT_RESET_BUS: 312 { 313 xpt_done(ccb); 314 break; 315 } 316 case XPT_GET_TRAN_SETTINGS: 317 { 318 ccb->cts.protocol = PROTO_SCSI; 319 ccb->cts.protocol_version = SCSI_REV_2; 320 ccb->cts.transport = XPORT_SPI; 321 ccb->cts.transport_version = 2; 322 ccb->cts.xport_specific.spi.valid = CTS_SPI_VALID_DISC; 323 ccb->cts.xport_specific.spi.flags = CTS_SPI_FLAGS_DISC_ENB; 324 ccb->cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ; 325 ccb->cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB; 326 ccb->ccb_h.status = CAM_REQ_CMP; 327 xpt_done(ccb); 328 break; 329 } 330 case XPT_SET_TRAN_SETTINGS: 331 { 332 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 333 xpt_done(ccb); 334 break; 335 } 336 case XPT_CALC_GEOMETRY: 337 { 338 cam_calc_geometry(&ccb->ccg, 1); 339 xpt_done(ccb); 340 break; 341 } 342 case XPT_PATH_INQ: 343 { 344 ccb->cpi.version_num = 1; 345 ccb->cpi.hba_inquiry = 0; 346 ccb->cpi.target_sprt = 0; 347 #if (__FreeBSD_version >= 902001) 348 ccb->cpi.hba_misc = PIM_UNMAPPED; 349 #else 350 ccb->cpi.hba_misc = 0; 351 #endif 352 ccb->cpi.hba_eng_cnt = 0; 353 ccb->cpi.max_lun = MRSAS_SCSI_MAX_LUNS; 354 ccb->cpi.unit_number = cam_sim_unit(sim); 355 ccb->cpi.bus_id = cam_sim_bus(sim); 356 ccb->cpi.initiator_id = MRSAS_SCSI_INITIATOR_ID; 357 ccb->cpi.base_transfer_speed = 150000; 358 strlcpy(ccb->cpi.sim_vid, "FreeBSD", SIM_IDLEN); 359 strlcpy(ccb->cpi.hba_vid, "AVAGO", HBA_IDLEN); 360 strlcpy(ccb->cpi.dev_name, cam_sim_name(sim), DEV_IDLEN); 361 ccb->cpi.transport = XPORT_SPI; 362 ccb->cpi.transport_version = 2; 363 ccb->cpi.protocol = PROTO_SCSI; 364 ccb->cpi.protocol_version = SCSI_REV_2; 365 if (ccb->cpi.bus_id == 0) 366 ccb->cpi.max_target = MRSAS_MAX_PD - 1; 367 else 368 ccb->cpi.max_target = MRSAS_MAX_LD_IDS - 1; 369 #if (__FreeBSD_version > 704000) 370 ccb->cpi.maxio = sc->max_num_sge * MRSAS_PAGE_SIZE; 371 #endif 372 ccb->ccb_h.status = CAM_REQ_CMP; 373 xpt_done(ccb); 374 break; 375 } 376 default: 377 { 378 ccb->ccb_h.status = CAM_REQ_INVALID; 379 xpt_done(ccb); 380 break; 381 } 382 } 383 } 384 385 /* 386 * mrsas_scsiio_timeout: Callback function for IO timed out 387 * input: mpt command context 388 * 389 * This function will execute after timeout value provided by ccb header from 390 * CAM layer, if timer expires. Driver will run timer for all DCDM and LDIO 391 * coming from CAM layer. This function is callback function for IO timeout 392 * and it runs in no-sleep context. Set do_timedout_reset in Adapter context 393 * so that it will execute OCR/Kill adpter from ocr_thread context. 394 */ 395 static void 396 mrsas_scsiio_timeout(void *data) 397 { 398 struct mrsas_mpt_cmd *cmd; 399 struct mrsas_softc *sc; 400 u_int32_t target_id; 401 402 if (!data) 403 return; 404 405 cmd = (struct mrsas_mpt_cmd *)data; 406 sc = cmd->sc; 407 408 if (cmd->ccb_ptr == NULL) { 409 printf("command timeout with NULL ccb\n"); 410 return; 411 } 412 413 /* 414 * Below callout is dummy entry so that it will be cancelled from 415 * mrsas_cmd_done(). Now Controller will go to OCR/Kill Adapter based 416 * on OCR enable/disable property of Controller from ocr_thread 417 * context. 418 */ 419 #if (__FreeBSD_version >= 1000510) 420 callout_reset_sbt(&cmd->cm_callout, SBT_1S * 180, 0, 421 mrsas_scsiio_timeout, cmd, 0); 422 #else 423 callout_reset(&cmd->cm_callout, (180000 * hz) / 1000, 424 mrsas_scsiio_timeout, cmd); 425 #endif 426 427 if (cmd->ccb_ptr->cpi.bus_id == 0) 428 target_id = cmd->ccb_ptr->ccb_h.target_id; 429 else 430 target_id = (cmd->ccb_ptr->ccb_h.target_id + (MRSAS_MAX_PD - 1)); 431 432 /* Save the cmd to be processed for TM, if it is not there in the array */ 433 if (sc->target_reset_pool[target_id] == NULL) { 434 sc->target_reset_pool[target_id] = cmd; 435 mrsas_atomic_inc(&sc->target_reset_outstanding); 436 } 437 438 return; 439 } 440 441 /* 442 * mrsas_startio: SCSI IO entry point 443 * input: Adapter instance soft state 444 * pointer to CAM Control Block 445 * 446 * This function is the SCSI IO entry point and it initiates IO processing. It 447 * copies the IO and depending if the IO is read/write or inquiry, it would 448 * call mrsas_build_ldio() or mrsas_build_dcdb(), respectively. It returns 0 449 * if the command is sent to firmware successfully, otherwise it returns 1. 450 */ 451 static int32_t 452 mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim, 453 union ccb *ccb) 454 { 455 struct mrsas_mpt_cmd *cmd; 456 struct ccb_hdr *ccb_h = &(ccb->ccb_h); 457 struct ccb_scsiio *csio = &(ccb->csio); 458 MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; 459 u_int8_t cmd_type; 460 461 if ((csio->cdb_io.cdb_bytes[0]) == SYNCHRONIZE_CACHE && 462 (!sc->fw_sync_cache_support)) { 463 ccb->ccb_h.status = CAM_REQ_CMP; 464 xpt_done(ccb); 465 return (0); 466 } 467 ccb_h->status |= CAM_SIM_QUEUED; 468 cmd = mrsas_get_mpt_cmd(sc); 469 470 if (!cmd) { 471 ccb_h->status |= CAM_REQUEUE_REQ; 472 xpt_done(ccb); 473 return (0); 474 } 475 if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 476 if (ccb_h->flags & CAM_DIR_IN) 477 cmd->flags |= MRSAS_DIR_IN; 478 if (ccb_h->flags & CAM_DIR_OUT) 479 cmd->flags |= MRSAS_DIR_OUT; 480 } else 481 cmd->flags = MRSAS_DIR_NONE; /* no data */ 482 483 /* For FreeBSD 9.2 and higher */ 484 #if (__FreeBSD_version >= 902001) 485 /* 486 * XXX We don't yet support physical addresses here. 487 */ 488 switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) { 489 case CAM_DATA_PADDR: 490 case CAM_DATA_SG_PADDR: 491 device_printf(sc->mrsas_dev, "%s: physical addresses not supported\n", 492 __func__); 493 mrsas_release_mpt_cmd(cmd); 494 ccb_h->status = CAM_REQ_INVALID; 495 ccb_h->status &= ~CAM_SIM_QUEUED; 496 goto done; 497 case CAM_DATA_SG: 498 device_printf(sc->mrsas_dev, "%s: scatter gather is not supported\n", 499 __func__); 500 mrsas_release_mpt_cmd(cmd); 501 ccb_h->status = CAM_REQ_INVALID; 502 goto done; 503 case CAM_DATA_VADDR: 504 if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) { 505 mrsas_release_mpt_cmd(cmd); 506 ccb_h->status = CAM_REQ_TOO_BIG; 507 goto done; 508 } 509 cmd->length = csio->dxfer_len; 510 if (cmd->length) 511 cmd->data = csio->data_ptr; 512 break; 513 case CAM_DATA_BIO: 514 if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) { 515 mrsas_release_mpt_cmd(cmd); 516 ccb_h->status = CAM_REQ_TOO_BIG; 517 goto done; 518 } 519 cmd->length = csio->dxfer_len; 520 if (cmd->length) 521 cmd->data = csio->data_ptr; 522 break; 523 default: 524 ccb->ccb_h.status = CAM_REQ_INVALID; 525 goto done; 526 } 527 #else 528 if (!(ccb_h->flags & CAM_DATA_PHYS)) { /* Virtual data address */ 529 if (!(ccb_h->flags & CAM_SCATTER_VALID)) { 530 if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) { 531 mrsas_release_mpt_cmd(cmd); 532 ccb_h->status = CAM_REQ_TOO_BIG; 533 goto done; 534 } 535 cmd->length = csio->dxfer_len; 536 if (cmd->length) 537 cmd->data = csio->data_ptr; 538 } else { 539 mrsas_release_mpt_cmd(cmd); 540 ccb_h->status = CAM_REQ_INVALID; 541 goto done; 542 } 543 } else { /* Data addresses are physical. */ 544 mrsas_release_mpt_cmd(cmd); 545 ccb_h->status = CAM_REQ_INVALID; 546 ccb_h->status &= ~CAM_SIM_QUEUED; 547 goto done; 548 } 549 #endif 550 /* save ccb ptr */ 551 cmd->ccb_ptr = ccb; 552 553 req_desc = mrsas_get_request_desc(sc, (cmd->index) - 1); 554 if (!req_desc) { 555 device_printf(sc->mrsas_dev, "Cannot get request_descriptor.\n"); 556 return (FAIL); 557 } 558 memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION)); 559 cmd->request_desc = req_desc; 560 561 if (ccb_h->flags & CAM_CDB_POINTER) 562 bcopy(csio->cdb_io.cdb_ptr, cmd->io_request->CDB.CDB32, csio->cdb_len); 563 else 564 bcopy(csio->cdb_io.cdb_bytes, cmd->io_request->CDB.CDB32, csio->cdb_len); 565 mtx_lock(&sc->raidmap_lock); 566 567 /* Check for IO type READ-WRITE targeted for Logical Volume */ 568 cmd_type = mrsas_find_io_type(sim, ccb); 569 switch (cmd_type) { 570 case READ_WRITE_LDIO: 571 /* Build READ-WRITE IO for Logical Volume */ 572 if (mrsas_build_ldio_rw(sc, cmd, ccb)) { 573 device_printf(sc->mrsas_dev, "Build RW LDIO failed.\n"); 574 mtx_unlock(&sc->raidmap_lock); 575 return (1); 576 } 577 break; 578 case NON_READ_WRITE_LDIO: 579 /* Build NON READ-WRITE IO for Logical Volume */ 580 if (mrsas_build_ldio_nonrw(sc, cmd, ccb)) { 581 device_printf(sc->mrsas_dev, "Build NON-RW LDIO failed.\n"); 582 mtx_unlock(&sc->raidmap_lock); 583 return (1); 584 } 585 break; 586 case READ_WRITE_SYSPDIO: 587 case NON_READ_WRITE_SYSPDIO: 588 if (sc->secure_jbod_support && 589 (cmd_type == NON_READ_WRITE_SYSPDIO)) { 590 /* Build NON-RW IO for JBOD */ 591 if (mrsas_build_syspdio(sc, cmd, ccb, sim, 0)) { 592 device_printf(sc->mrsas_dev, 593 "Build SYSPDIO failed.\n"); 594 mtx_unlock(&sc->raidmap_lock); 595 return (1); 596 } 597 } else { 598 /* Build RW IO for JBOD */ 599 if (mrsas_build_syspdio(sc, cmd, ccb, sim, 1)) { 600 device_printf(sc->mrsas_dev, 601 "Build SYSPDIO failed.\n"); 602 mtx_unlock(&sc->raidmap_lock); 603 return (1); 604 } 605 } 606 } 607 mtx_unlock(&sc->raidmap_lock); 608 609 if (cmd->flags == MRSAS_DIR_IN) /* from device */ 610 cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_READ; 611 else if (cmd->flags == MRSAS_DIR_OUT) /* to device */ 612 cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_WRITE; 613 614 cmd->io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING; 615 cmd->io_request->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 4; 616 cmd->io_request->SenseBufferLowAddress = cmd->sense_phys_addr; 617 cmd->io_request->SenseBufferLength = MRSAS_SCSI_SENSE_BUFFERSIZE; 618 619 req_desc = cmd->request_desc; 620 req_desc->SCSIIO.SMID = cmd->index; 621 622 /* 623 * Start timer for IO timeout. Default timeout value is 90 second. 624 */ 625 #if (__FreeBSD_version >= 1000510) 626 callout_reset_sbt(&cmd->cm_callout, SBT_1S * 180, 0, 627 mrsas_scsiio_timeout, cmd, 0); 628 #else 629 callout_reset(&cmd->cm_callout, (180000 * hz) / 1000, 630 mrsas_scsiio_timeout, cmd); 631 #endif 632 mrsas_atomic_inc(&sc->fw_outstanding); 633 634 if (mrsas_atomic_read(&sc->fw_outstanding) > sc->io_cmds_highwater) 635 sc->io_cmds_highwater++; 636 637 mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); 638 return (0); 639 640 done: 641 xpt_done(ccb); 642 return (0); 643 } 644 645 /* 646 * mrsas_find_io_type: Determines if IO is read/write or inquiry 647 * input: pointer to CAM Control Block 648 * 649 * This function determines if the IO is read/write or inquiry. It returns a 1 650 * if the IO is read/write and 0 if it is inquiry. 651 */ 652 int 653 mrsas_find_io_type(struct cam_sim *sim, union ccb *ccb) 654 { 655 struct ccb_scsiio *csio = &(ccb->csio); 656 657 switch (csio->cdb_io.cdb_bytes[0]) { 658 case READ_10: 659 case WRITE_10: 660 case READ_12: 661 case WRITE_12: 662 case READ_6: 663 case WRITE_6: 664 case READ_16: 665 case WRITE_16: 666 return (cam_sim_bus(sim) ? 667 READ_WRITE_SYSPDIO : READ_WRITE_LDIO); 668 default: 669 return (cam_sim_bus(sim) ? 670 NON_READ_WRITE_SYSPDIO : NON_READ_WRITE_LDIO); 671 } 672 } 673 674 /* 675 * mrsas_get_mpt_cmd: Get a cmd from free command pool 676 * input: Adapter instance soft state 677 * 678 * This function removes an MPT command from the command free list and 679 * initializes it. 680 */ 681 struct mrsas_mpt_cmd * 682 mrsas_get_mpt_cmd(struct mrsas_softc *sc) 683 { 684 struct mrsas_mpt_cmd *cmd = NULL; 685 686 mtx_lock(&sc->mpt_cmd_pool_lock); 687 if (!TAILQ_EMPTY(&sc->mrsas_mpt_cmd_list_head)) { 688 cmd = TAILQ_FIRST(&sc->mrsas_mpt_cmd_list_head); 689 TAILQ_REMOVE(&sc->mrsas_mpt_cmd_list_head, cmd, next); 690 } else { 691 goto out; 692 } 693 694 memset((uint8_t *)cmd->io_request, 0, MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE); 695 cmd->data = NULL; 696 cmd->length = 0; 697 cmd->flags = 0; 698 cmd->error_code = 0; 699 cmd->load_balance = 0; 700 cmd->ccb_ptr = NULL; 701 702 out: 703 mtx_unlock(&sc->mpt_cmd_pool_lock); 704 return cmd; 705 } 706 707 /* 708 * mrsas_release_mpt_cmd: Return a cmd to free command pool 709 * input: Command packet for return to free command pool 710 * 711 * This function returns an MPT command to the free command list. 712 */ 713 void 714 mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd) 715 { 716 struct mrsas_softc *sc = cmd->sc; 717 718 mtx_lock(&sc->mpt_cmd_pool_lock); 719 cmd->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX; 720 TAILQ_INSERT_HEAD(&(sc->mrsas_mpt_cmd_list_head), cmd, next); 721 mtx_unlock(&sc->mpt_cmd_pool_lock); 722 723 return; 724 } 725 726 /* 727 * mrsas_get_request_desc: Get request descriptor from array 728 * input: Adapter instance soft state 729 * SMID index 730 * 731 * This function returns a pointer to the request descriptor. 732 */ 733 MRSAS_REQUEST_DESCRIPTOR_UNION * 734 mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index) 735 { 736 u_int8_t *p; 737 738 if (index >= sc->max_fw_cmds) { 739 device_printf(sc->mrsas_dev, "Invalid SMID (0x%x)request for desc\n", index); 740 return NULL; 741 } 742 p = sc->req_desc + sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION) * index; 743 744 return (MRSAS_REQUEST_DESCRIPTOR_UNION *) p; 745 } 746 747 /* 748 * mrsas_build_ldio_rw: Builds an LDIO command 749 * input: Adapter instance soft state 750 * Pointer to command packet 751 * Pointer to CCB 752 * 753 * This function builds the LDIO command packet. It returns 0 if the command is 754 * built successfully, otherwise it returns a 1. 755 */ 756 int 757 mrsas_build_ldio_rw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 758 union ccb *ccb) 759 { 760 struct ccb_hdr *ccb_h = &(ccb->ccb_h); 761 struct ccb_scsiio *csio = &(ccb->csio); 762 u_int32_t device_id; 763 MRSAS_RAID_SCSI_IO_REQUEST *io_request; 764 765 device_id = ccb_h->target_id; 766 767 io_request = cmd->io_request; 768 io_request->RaidContext.raid_context.VirtualDiskTgtId = device_id; 769 io_request->RaidContext.raid_context.status = 0; 770 io_request->RaidContext.raid_context.exStatus = 0; 771 772 /* just the cdb len, other flags zero, and ORed-in later for FP */ 773 io_request->IoFlags = csio->cdb_len; 774 775 if (mrsas_setup_io(sc, cmd, ccb, device_id, io_request) != SUCCESS) 776 device_printf(sc->mrsas_dev, "Build ldio or fpio error\n"); 777 778 io_request->DataLength = cmd->length; 779 780 if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) { 781 if (cmd->sge_count > sc->max_num_sge) { 782 device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds" 783 "max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge); 784 return (FAIL); 785 } 786 if (sc->is_ventura) 787 io_request->RaidContext.raid_context_g35.numSGE = cmd->sge_count; 788 else { 789 /* 790 * numSGE store lower 8 bit of sge_count. numSGEExt store 791 * higher 8 bit of sge_count 792 */ 793 io_request->RaidContext.raid_context.numSGE = cmd->sge_count; 794 io_request->RaidContext.raid_context.numSGEExt = (uint8_t)(cmd->sge_count >> 8); 795 } 796 797 } else { 798 device_printf(sc->mrsas_dev, "Data map/load failed.\n"); 799 return (FAIL); 800 } 801 return (0); 802 } 803 804 /* 805 * mrsas_setup_io: Set up data including Fast Path I/O 806 * input: Adapter instance soft state 807 * Pointer to command packet 808 * Pointer to CCB 809 * 810 * This function builds the DCDB inquiry command. It returns 0 if the command 811 * is built successfully, otherwise it returns a 1. 812 */ 813 int 814 mrsas_setup_io(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 815 union ccb *ccb, u_int32_t device_id, 816 MRSAS_RAID_SCSI_IO_REQUEST * io_request) 817 { 818 struct ccb_hdr *ccb_h = &(ccb->ccb_h); 819 struct ccb_scsiio *csio = &(ccb->csio); 820 struct IO_REQUEST_INFO io_info; 821 MR_DRV_RAID_MAP_ALL *map_ptr; 822 MR_LD_RAID *raid; 823 u_int8_t fp_possible; 824 u_int32_t start_lba_hi, start_lba_lo, ld_block_size, ld; 825 u_int32_t datalength = 0; 826 827 start_lba_lo = 0; 828 start_lba_hi = 0; 829 fp_possible = 0; 830 831 /* 832 * READ_6 (0x08) or WRITE_6 (0x0A) cdb 833 */ 834 if (csio->cdb_len == 6) { 835 datalength = (u_int32_t)csio->cdb_io.cdb_bytes[4]; 836 start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[1] << 16) | 837 ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 8) | 838 (u_int32_t)csio->cdb_io.cdb_bytes[3]; 839 start_lba_lo &= 0x1FFFFF; 840 } 841 /* 842 * READ_10 (0x28) or WRITE_6 (0x2A) cdb 843 */ 844 else if (csio->cdb_len == 10) { 845 datalength = (u_int32_t)csio->cdb_io.cdb_bytes[8] | 846 ((u_int32_t)csio->cdb_io.cdb_bytes[7] << 8); 847 start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) | 848 ((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) | 849 (u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 | 850 ((u_int32_t)csio->cdb_io.cdb_bytes[5]); 851 } 852 /* 853 * READ_12 (0xA8) or WRITE_12 (0xAA) cdb 854 */ 855 else if (csio->cdb_len == 12) { 856 datalength = (u_int32_t)csio->cdb_io.cdb_bytes[6] << 24 | 857 ((u_int32_t)csio->cdb_io.cdb_bytes[7] << 16) | 858 ((u_int32_t)csio->cdb_io.cdb_bytes[8] << 8) | 859 ((u_int32_t)csio->cdb_io.cdb_bytes[9]); 860 start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) | 861 ((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) | 862 (u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 | 863 ((u_int32_t)csio->cdb_io.cdb_bytes[5]); 864 } 865 /* 866 * READ_16 (0x88) or WRITE_16 (0xx8A) cdb 867 */ 868 else if (csio->cdb_len == 16) { 869 datalength = (u_int32_t)csio->cdb_io.cdb_bytes[10] << 24 | 870 ((u_int32_t)csio->cdb_io.cdb_bytes[11] << 16) | 871 ((u_int32_t)csio->cdb_io.cdb_bytes[12] << 8) | 872 ((u_int32_t)csio->cdb_io.cdb_bytes[13]); 873 start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[6] << 24) | 874 ((u_int32_t)csio->cdb_io.cdb_bytes[7] << 16) | 875 (u_int32_t)csio->cdb_io.cdb_bytes[8] << 8 | 876 ((u_int32_t)csio->cdb_io.cdb_bytes[9]); 877 start_lba_hi = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) | 878 ((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) | 879 (u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 | 880 ((u_int32_t)csio->cdb_io.cdb_bytes[5]); 881 } 882 memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO)); 883 io_info.ldStartBlock = ((u_int64_t)start_lba_hi << 32) | start_lba_lo; 884 io_info.numBlocks = datalength; 885 io_info.ldTgtId = device_id; 886 887 switch (ccb_h->flags & CAM_DIR_MASK) { 888 case CAM_DIR_IN: 889 io_info.isRead = 1; 890 break; 891 case CAM_DIR_OUT: 892 io_info.isRead = 0; 893 break; 894 case CAM_DIR_NONE: 895 default: 896 mrsas_dprint(sc, MRSAS_TRACE, "From %s : DMA Flag is %d \n", __func__, ccb_h->flags & CAM_DIR_MASK); 897 break; 898 } 899 900 map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; 901 ld_block_size = MR_LdBlockSizeGet(device_id, map_ptr); 902 903 ld = MR_TargetIdToLdGet(device_id, map_ptr); 904 if ((ld >= MAX_LOGICAL_DRIVES_EXT) || (!sc->fast_path_io)) { 905 io_request->RaidContext.raid_context.regLockFlags = 0; 906 fp_possible = 0; 907 } else { 908 if (MR_BuildRaidContext(sc, &io_info, &io_request->RaidContext.raid_context, map_ptr)) 909 fp_possible = io_info.fpOkForIo; 910 } 911 912 raid = MR_LdRaidGet(ld, map_ptr); 913 /* Store the TM capability value in cmd */ 914 cmd->tmCapable = raid->capability.tmCapable; 915 916 cmd->request_desc->SCSIIO.MSIxIndex = 917 sc->msix_vectors ? smp_processor_id() % sc->msix_vectors : 0; 918 919 920 if (fp_possible) { 921 mrsas_set_pd_lba(io_request, csio->cdb_len, &io_info, ccb, map_ptr, 922 start_lba_lo, ld_block_size); 923 io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; 924 cmd->request_desc->SCSIIO.RequestFlags = 925 (MPI2_REQ_DESCRIPT_FLAGS_FP_IO << 926 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 927 if (sc->mrsas_gen3_ctrl) { 928 if (io_request->RaidContext.raid_context.regLockFlags == REGION_TYPE_UNUSED) 929 cmd->request_desc->SCSIIO.RequestFlags = 930 (MRSAS_REQ_DESCRIPT_FLAGS_NO_LOCK << 931 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 932 io_request->RaidContext.raid_context.Type = MPI2_TYPE_CUDA; 933 io_request->RaidContext.raid_context.nseg = 0x1; 934 io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH; 935 io_request->RaidContext.raid_context.regLockFlags |= 936 (MR_RL_FLAGS_GRANT_DESTINATION_CUDA | 937 MR_RL_FLAGS_SEQ_NUM_ENABLE); 938 } else if (sc->is_ventura) { 939 io_request->RaidContext.raid_context_g35.Type = MPI2_TYPE_CUDA; 940 io_request->RaidContext.raid_context_g35.nseg = 0x1; 941 io_request->RaidContext.raid_context_g35.routingFlags.bits.sqn = 1; 942 io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH; 943 if (io_request->RaidContext.raid_context_g35.routingFlags.bits.sld) { 944 io_request->RaidContext.raid_context_g35.RAIDFlags = 945 (MR_RAID_FLAGS_IO_SUB_TYPE_CACHE_BYPASS 946 << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT); 947 } 948 } 949 if ((sc->load_balance_info[device_id].loadBalanceFlag) && 950 (io_info.isRead)) { 951 io_info.devHandle = 952 mrsas_get_updated_dev_handle(sc, 953 &sc->load_balance_info[device_id], &io_info); 954 cmd->load_balance = MRSAS_LOAD_BALANCE_FLAG; 955 cmd->pd_r1_lb = io_info.pd_after_lb; 956 if (sc->is_ventura) 957 io_request->RaidContext.raid_context_g35.spanArm = io_info.span_arm; 958 else 959 io_request->RaidContext.raid_context.spanArm = io_info.span_arm; 960 } else 961 cmd->load_balance = 0; 962 cmd->request_desc->SCSIIO.DevHandle = io_info.devHandle; 963 io_request->DevHandle = io_info.devHandle; 964 } else { 965 /* Not FP IO */ 966 io_request->RaidContext.raid_context.timeoutValue = map_ptr->raidMap.fpPdIoTimeoutSec; 967 cmd->request_desc->SCSIIO.RequestFlags = 968 (MRSAS_REQ_DESCRIPT_FLAGS_LD_IO << 969 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 970 if (sc->mrsas_gen3_ctrl) { 971 if (io_request->RaidContext.raid_context.regLockFlags == REGION_TYPE_UNUSED) 972 cmd->request_desc->SCSIIO.RequestFlags = 973 (MRSAS_REQ_DESCRIPT_FLAGS_NO_LOCK << 974 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 975 io_request->RaidContext.raid_context.Type = MPI2_TYPE_CUDA; 976 io_request->RaidContext.raid_context.regLockFlags |= 977 (MR_RL_FLAGS_GRANT_DESTINATION_CPU0 | 978 MR_RL_FLAGS_SEQ_NUM_ENABLE); 979 io_request->RaidContext.raid_context.nseg = 0x1; 980 } else if (sc->is_ventura) { 981 io_request->RaidContext.raid_context_g35.Type = MPI2_TYPE_CUDA; 982 io_request->RaidContext.raid_context_g35.routingFlags.bits.sqn = 1; 983 io_request->RaidContext.raid_context_g35.nseg = 0x1; 984 } 985 io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST; 986 io_request->DevHandle = device_id; 987 } 988 return (0); 989 } 990 991 /* 992 * mrsas_build_ldio_nonrw: Builds an LDIO command 993 * input: Adapter instance soft state 994 * Pointer to command packet 995 * Pointer to CCB 996 * 997 * This function builds the LDIO command packet. It returns 0 if the command is 998 * built successfully, otherwise it returns a 1. 999 */ 1000 int 1001 mrsas_build_ldio_nonrw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 1002 union ccb *ccb) 1003 { 1004 struct ccb_hdr *ccb_h = &(ccb->ccb_h); 1005 u_int32_t device_id, ld; 1006 MR_DRV_RAID_MAP_ALL *map_ptr; 1007 MR_LD_RAID *raid; 1008 MRSAS_RAID_SCSI_IO_REQUEST *io_request; 1009 1010 io_request = cmd->io_request; 1011 device_id = ccb_h->target_id; 1012 1013 map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; 1014 ld = MR_TargetIdToLdGet(device_id, map_ptr); 1015 raid = MR_LdRaidGet(ld, map_ptr); 1016 /* Store the TM capability value in cmd */ 1017 cmd->tmCapable = raid->capability.tmCapable; 1018 1019 /* FW path for LD Non-RW (SCSI management commands) */ 1020 io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST; 1021 io_request->DevHandle = device_id; 1022 cmd->request_desc->SCSIIO.RequestFlags = 1023 (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << 1024 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 1025 1026 io_request->RaidContext.raid_context.VirtualDiskTgtId = device_id; 1027 io_request->LUN[1] = ccb_h->target_lun & 0xF; 1028 io_request->DataLength = cmd->length; 1029 1030 if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) { 1031 if (cmd->sge_count > sc->max_num_sge) { 1032 device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds" 1033 "max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge); 1034 return (1); 1035 } 1036 if (sc->is_ventura) 1037 io_request->RaidContext.raid_context_g35.numSGE = cmd->sge_count; 1038 else { 1039 /* 1040 * numSGE store lower 8 bit of sge_count. numSGEExt store 1041 * higher 8 bit of sge_count 1042 */ 1043 io_request->RaidContext.raid_context.numSGE = cmd->sge_count; 1044 io_request->RaidContext.raid_context.numSGEExt = (uint8_t)(cmd->sge_count >> 8); 1045 } 1046 } else { 1047 device_printf(sc->mrsas_dev, "Data map/load failed.\n"); 1048 return (1); 1049 } 1050 return (0); 1051 } 1052 1053 /* 1054 * mrsas_build_syspdio: Builds an DCDB command 1055 * input: Adapter instance soft state 1056 * Pointer to command packet 1057 * Pointer to CCB 1058 * 1059 * This function builds the DCDB inquiry command. It returns 0 if the command 1060 * is built successfully, otherwise it returns a 1. 1061 */ 1062 int 1063 mrsas_build_syspdio(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd, 1064 union ccb *ccb, struct cam_sim *sim, u_int8_t fp_possible) 1065 { 1066 struct ccb_hdr *ccb_h = &(ccb->ccb_h); 1067 u_int32_t device_id; 1068 MR_DRV_RAID_MAP_ALL *local_map_ptr; 1069 MRSAS_RAID_SCSI_IO_REQUEST *io_request; 1070 struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync; 1071 1072 io_request = cmd->io_request; 1073 device_id = ccb_h->target_id; 1074 local_map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; 1075 io_request->RaidContext.raid_context.RAIDFlags = MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD 1076 << MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT; 1077 io_request->RaidContext.raid_context.regLockFlags = 0; 1078 io_request->RaidContext.raid_context.regLockRowLBA = 0; 1079 io_request->RaidContext.raid_context.regLockLength = 0; 1080 1081 /* If FW supports PD sequence number */ 1082 if (sc->use_seqnum_jbod_fp && 1083 sc->pd_list[device_id].driveType == 0x00) { 1084 //printf("Using Drv seq num\n"); 1085 pd_sync = (void *)sc->jbodmap_mem[(sc->pd_seq_map_id - 1) & 1]; 1086 cmd->tmCapable = pd_sync->seq[device_id].capability.tmCapable; 1087 /* More than 256 PD/JBOD support for Ventura */ 1088 if (sc->support_morethan256jbod) 1089 io_request->RaidContext.raid_context.VirtualDiskTgtId = 1090 pd_sync->seq[device_id].pdTargetId; 1091 else 1092 io_request->RaidContext.raid_context.VirtualDiskTgtId = 1093 device_id + 255; 1094 io_request->RaidContext.raid_context.configSeqNum = pd_sync->seq[device_id].seqNum; 1095 io_request->DevHandle = pd_sync->seq[device_id].devHandle; 1096 if (sc->is_ventura) 1097 io_request->RaidContext.raid_context_g35.routingFlags.bits.sqn = 1; 1098 else 1099 io_request->RaidContext.raid_context.regLockFlags |= 1100 (MR_RL_FLAGS_SEQ_NUM_ENABLE | MR_RL_FLAGS_GRANT_DESTINATION_CUDA); 1101 io_request->RaidContext.raid_context.Type = MPI2_TYPE_CUDA; 1102 io_request->RaidContext.raid_context.nseg = 0x1; 1103 } else if (sc->fast_path_io) { 1104 //printf("Using LD RAID map\n"); 1105 io_request->RaidContext.raid_context.VirtualDiskTgtId = device_id; 1106 io_request->RaidContext.raid_context.configSeqNum = 0; 1107 local_map_ptr = sc->ld_drv_map[(sc->map_id & 1)]; 1108 io_request->DevHandle = 1109 local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl; 1110 } else { 1111 //printf("Using FW PATH\n"); 1112 /* Want to send all IO via FW path */ 1113 io_request->RaidContext.raid_context.VirtualDiskTgtId = device_id; 1114 io_request->RaidContext.raid_context.configSeqNum = 0; 1115 io_request->DevHandle = 0xFFFF; 1116 } 1117 1118 cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle; 1119 cmd->request_desc->SCSIIO.MSIxIndex = 1120 sc->msix_vectors ? smp_processor_id() % sc->msix_vectors : 0; 1121 1122 if (!fp_possible) { 1123 /* system pd firmware path */ 1124 io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST; 1125 cmd->request_desc->SCSIIO.RequestFlags = 1126 (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << 1127 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 1128 io_request->RaidContext.raid_context.timeoutValue = 1129 local_map_ptr->raidMap.fpPdIoTimeoutSec; 1130 io_request->RaidContext.raid_context.VirtualDiskTgtId = device_id; 1131 } else { 1132 /* system pd fast path */ 1133 io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; 1134 io_request->RaidContext.raid_context.timeoutValue = local_map_ptr->raidMap.fpPdIoTimeoutSec; 1135 1136 /* 1137 * NOTE - For system pd RW cmds only IoFlags will be FAST_PATH 1138 * Because the NON RW cmds will now go via FW Queue 1139 * and not the Exception queue 1140 */ 1141 if (sc->mrsas_gen3_ctrl || sc->is_ventura) 1142 io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH; 1143 1144 cmd->request_desc->SCSIIO.RequestFlags = 1145 (MPI2_REQ_DESCRIPT_FLAGS_FP_IO << 1146 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 1147 } 1148 1149 io_request->LUN[1] = ccb_h->target_lun & 0xF; 1150 io_request->DataLength = cmd->length; 1151 1152 if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) { 1153 if (cmd->sge_count > sc->max_num_sge) { 1154 device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds" 1155 "max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge); 1156 return (1); 1157 } 1158 if (sc->is_ventura) 1159 io_request->RaidContext.raid_context_g35.numSGE = cmd->sge_count; 1160 else { 1161 /* 1162 * numSGE store lower 8 bit of sge_count. numSGEExt store 1163 * higher 8 bit of sge_count 1164 */ 1165 io_request->RaidContext.raid_context.numSGE = cmd->sge_count; 1166 io_request->RaidContext.raid_context.numSGEExt = (uint8_t)(cmd->sge_count >> 8); 1167 } 1168 } else { 1169 device_printf(sc->mrsas_dev, "Data map/load failed.\n"); 1170 return (1); 1171 } 1172 return (0); 1173 } 1174 1175 /* 1176 * mrsas_map_request: Map and load data 1177 * input: Adapter instance soft state 1178 * Pointer to command packet 1179 * 1180 * For data from OS, map and load the data buffer into bus space. The SG list 1181 * is built in the callback. If the bus dmamap load is not successful, 1182 * cmd->error_code will contain the error code and a 1 is returned. 1183 */ 1184 int 1185 mrsas_map_request(struct mrsas_softc *sc, 1186 struct mrsas_mpt_cmd *cmd, union ccb *ccb) 1187 { 1188 u_int32_t retcode = 0; 1189 struct cam_sim *sim; 1190 1191 sim = xpt_path_sim(cmd->ccb_ptr->ccb_h.path); 1192 1193 if (cmd->data != NULL) { 1194 /* Map data buffer into bus space */ 1195 mtx_lock(&sc->io_lock); 1196 #if (__FreeBSD_version >= 902001) 1197 retcode = bus_dmamap_load_ccb(sc->data_tag, cmd->data_dmamap, ccb, 1198 mrsas_data_load_cb, cmd, 0); 1199 #else 1200 retcode = bus_dmamap_load(sc->data_tag, cmd->data_dmamap, cmd->data, 1201 cmd->length, mrsas_data_load_cb, cmd, BUS_DMA_NOWAIT); 1202 #endif 1203 mtx_unlock(&sc->io_lock); 1204 if (retcode) 1205 device_printf(sc->mrsas_dev, "bus_dmamap_load(): retcode = %d\n", retcode); 1206 if (retcode == EINPROGRESS) { 1207 device_printf(sc->mrsas_dev, "request load in progress\n"); 1208 mrsas_freeze_simq(cmd, sim); 1209 } 1210 } 1211 if (cmd->error_code) 1212 return (1); 1213 return (retcode); 1214 } 1215 1216 /* 1217 * mrsas_unmap_request: Unmap and unload data 1218 * input: Adapter instance soft state 1219 * Pointer to command packet 1220 * 1221 * This function unmaps and unloads data from OS. 1222 */ 1223 void 1224 mrsas_unmap_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd) 1225 { 1226 if (cmd->data != NULL) { 1227 if (cmd->flags & MRSAS_DIR_IN) 1228 bus_dmamap_sync(sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_POSTREAD); 1229 if (cmd->flags & MRSAS_DIR_OUT) 1230 bus_dmamap_sync(sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_POSTWRITE); 1231 mtx_lock(&sc->io_lock); 1232 bus_dmamap_unload(sc->data_tag, cmd->data_dmamap); 1233 mtx_unlock(&sc->io_lock); 1234 } 1235 } 1236 1237 /* 1238 * mrsas_data_load_cb: Callback entry point 1239 * input: Pointer to command packet as argument 1240 * Pointer to segment 1241 * Number of segments Error 1242 * 1243 * This is the callback function of the bus dma map load. It builds the SG 1244 * list. 1245 */ 1246 static void 1247 mrsas_data_load_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 1248 { 1249 struct mrsas_mpt_cmd *cmd = (struct mrsas_mpt_cmd *)arg; 1250 struct mrsas_softc *sc = cmd->sc; 1251 MRSAS_RAID_SCSI_IO_REQUEST *io_request; 1252 pMpi25IeeeSgeChain64_t sgl_ptr; 1253 int i = 0, sg_processed = 0; 1254 1255 if (error) { 1256 cmd->error_code = error; 1257 device_printf(sc->mrsas_dev, "mrsas_data_load_cb: error=%d\n", error); 1258 if (error == EFBIG) { 1259 cmd->ccb_ptr->ccb_h.status = CAM_REQ_TOO_BIG; 1260 return; 1261 } 1262 } 1263 if (cmd->flags & MRSAS_DIR_IN) 1264 bus_dmamap_sync(cmd->sc->data_tag, cmd->data_dmamap, 1265 BUS_DMASYNC_PREREAD); 1266 if (cmd->flags & MRSAS_DIR_OUT) 1267 bus_dmamap_sync(cmd->sc->data_tag, cmd->data_dmamap, 1268 BUS_DMASYNC_PREWRITE); 1269 if (nseg > sc->max_num_sge) { 1270 device_printf(sc->mrsas_dev, "SGE count is too large or 0.\n"); 1271 return; 1272 } 1273 io_request = cmd->io_request; 1274 sgl_ptr = (pMpi25IeeeSgeChain64_t)&io_request->SGL; 1275 1276 if (sc->mrsas_gen3_ctrl || sc->is_ventura) { 1277 pMpi25IeeeSgeChain64_t sgl_ptr_end = sgl_ptr; 1278 1279 sgl_ptr_end += sc->max_sge_in_main_msg - 1; 1280 sgl_ptr_end->Flags = 0; 1281 } 1282 if (nseg != 0) { 1283 for (i = 0; i < nseg; i++) { 1284 sgl_ptr->Address = segs[i].ds_addr; 1285 sgl_ptr->Length = segs[i].ds_len; 1286 sgl_ptr->Flags = 0; 1287 if (sc->mrsas_gen3_ctrl || sc->is_ventura) { 1288 if (i == nseg - 1) 1289 sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST; 1290 } 1291 sgl_ptr++; 1292 sg_processed = i + 1; 1293 if ((sg_processed == (sc->max_sge_in_main_msg - 1)) && 1294 (nseg > sc->max_sge_in_main_msg)) { 1295 pMpi25IeeeSgeChain64_t sg_chain; 1296 1297 if (sc->mrsas_gen3_ctrl || sc->is_ventura) { 1298 if ((cmd->io_request->IoFlags & MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) 1299 != MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) 1300 cmd->io_request->ChainOffset = sc->chain_offset_io_request; 1301 else 1302 cmd->io_request->ChainOffset = 0; 1303 } else 1304 cmd->io_request->ChainOffset = sc->chain_offset_io_request; 1305 sg_chain = sgl_ptr; 1306 if (sc->mrsas_gen3_ctrl || sc->is_ventura) 1307 sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT; 1308 else 1309 sg_chain->Flags = (IEEE_SGE_FLAGS_CHAIN_ELEMENT | MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR); 1310 sg_chain->Length = (sizeof(MPI2_SGE_IO_UNION) * (nseg - sg_processed)); 1311 sg_chain->Address = cmd->chain_frame_phys_addr; 1312 sgl_ptr = (pMpi25IeeeSgeChain64_t)cmd->chain_frame; 1313 } 1314 } 1315 } 1316 cmd->sge_count = nseg; 1317 } 1318 1319 /* 1320 * mrsas_freeze_simq: Freeze SIM queue 1321 * input: Pointer to command packet 1322 * Pointer to SIM 1323 * 1324 * This function freezes the sim queue. 1325 */ 1326 static void 1327 mrsas_freeze_simq(struct mrsas_mpt_cmd *cmd, struct cam_sim *sim) 1328 { 1329 union ccb *ccb = (union ccb *)(cmd->ccb_ptr); 1330 1331 xpt_freeze_simq(sim, 1); 1332 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1333 ccb->ccb_h.status |= CAM_REQUEUE_REQ; 1334 } 1335 1336 void 1337 mrsas_xpt_freeze(struct mrsas_softc *sc) 1338 { 1339 xpt_freeze_simq(sc->sim_0, 1); 1340 xpt_freeze_simq(sc->sim_1, 1); 1341 } 1342 1343 void 1344 mrsas_xpt_release(struct mrsas_softc *sc) 1345 { 1346 xpt_release_simq(sc->sim_0, 1); 1347 xpt_release_simq(sc->sim_1, 1); 1348 } 1349 1350 /* 1351 * mrsas_cmd_done: Perform remaining command completion 1352 * input: Adapter instance soft state Pointer to command packet 1353 * 1354 * This function calls ummap request and releases the MPT command. 1355 */ 1356 void 1357 mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd) 1358 { 1359 mrsas_unmap_request(sc, cmd); 1360 1361 mtx_lock(&sc->sim_lock); 1362 callout_stop(&cmd->cm_callout); 1363 xpt_done(cmd->ccb_ptr); 1364 cmd->ccb_ptr = NULL; 1365 mtx_unlock(&sc->sim_lock); 1366 mrsas_release_mpt_cmd(cmd); 1367 } 1368 1369 /* 1370 * mrsas_cam_poll: Polling entry point 1371 * input: Pointer to SIM 1372 * 1373 * This is currently a stub function. 1374 */ 1375 static void 1376 mrsas_cam_poll(struct cam_sim *sim) 1377 { 1378 int i; 1379 struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim); 1380 1381 if (sc->msix_vectors != 0){ 1382 for (i=0; i<sc->msix_vectors; i++){ 1383 mrsas_complete_cmd(sc, i); 1384 } 1385 } else { 1386 mrsas_complete_cmd(sc, 0); 1387 } 1388 } 1389 1390 /* 1391 * mrsas_bus_scan: Perform bus scan 1392 * input: Adapter instance soft state 1393 * 1394 * This mrsas_bus_scan function is needed for FreeBSD 7.x. Also, it should not 1395 * be called in FreeBSD 8.x and later versions, where the bus scan is 1396 * automatic. 1397 */ 1398 int 1399 mrsas_bus_scan(struct mrsas_softc *sc) 1400 { 1401 union ccb *ccb_0; 1402 union ccb *ccb_1; 1403 1404 if ((ccb_0 = xpt_alloc_ccb()) == NULL) { 1405 return (ENOMEM); 1406 } 1407 if ((ccb_1 = xpt_alloc_ccb()) == NULL) { 1408 xpt_free_ccb(ccb_0); 1409 return (ENOMEM); 1410 } 1411 mtx_lock(&sc->sim_lock); 1412 if (xpt_create_path(&ccb_0->ccb_h.path, xpt_periph, cam_sim_path(sc->sim_0), 1413 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1414 xpt_free_ccb(ccb_0); 1415 xpt_free_ccb(ccb_1); 1416 mtx_unlock(&sc->sim_lock); 1417 return (EIO); 1418 } 1419 if (xpt_create_path(&ccb_1->ccb_h.path, xpt_periph, cam_sim_path(sc->sim_1), 1420 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1421 xpt_free_ccb(ccb_0); 1422 xpt_free_ccb(ccb_1); 1423 mtx_unlock(&sc->sim_lock); 1424 return (EIO); 1425 } 1426 mtx_unlock(&sc->sim_lock); 1427 xpt_rescan(ccb_0); 1428 xpt_rescan(ccb_1); 1429 1430 return (0); 1431 } 1432 1433 /* 1434 * mrsas_bus_scan_sim: Perform bus scan per SIM 1435 * input: adapter instance soft state 1436 * 1437 * This function will be called from Event handler on LD creation/deletion, 1438 * JBOD on/off. 1439 */ 1440 int 1441 mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim) 1442 { 1443 union ccb *ccb; 1444 1445 if ((ccb = xpt_alloc_ccb()) == NULL) { 1446 return (ENOMEM); 1447 } 1448 mtx_lock(&sc->sim_lock); 1449 if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, cam_sim_path(sim), 1450 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1451 xpt_free_ccb(ccb); 1452 mtx_unlock(&sc->sim_lock); 1453 return (EIO); 1454 } 1455 mtx_unlock(&sc->sim_lock); 1456 xpt_rescan(ccb); 1457 1458 return (0); 1459 } 1460 1461 /* 1462 * mrsas_track_scsiio: Track IOs for a given target in the mpt_cmd_list 1463 * input: Adapter instance soft state 1464 * Target ID of target 1465 * Bus ID of the target 1466 * 1467 * This function checks for any pending IO in the whole mpt_cmd_list pool 1468 * with the bus_id and target_id passed in arguments. If some IO is found 1469 * that means target reset is not successfully completed. 1470 * 1471 * Returns FAIL if IOs pending to the target device, else return SUCCESS 1472 */ 1473 static int 1474 mrsas_track_scsiio(struct mrsas_softc *sc, target_id_t tgt_id, u_int32_t bus_id) 1475 { 1476 int i; 1477 struct mrsas_mpt_cmd *mpt_cmd = NULL; 1478 1479 for (i = 0 ; i < sc->max_fw_cmds; i++) { 1480 mpt_cmd = sc->mpt_cmd_list[i]; 1481 1482 /* 1483 * Check if the target_id and bus_id is same as the timeout IO 1484 */ 1485 if (mpt_cmd->ccb_ptr) { 1486 /* bus_id = 1 denotes a VD */ 1487 if (bus_id == 1) 1488 tgt_id = (mpt_cmd->ccb_ptr->ccb_h.target_id - (MRSAS_MAX_PD - 1)); 1489 1490 if (mpt_cmd->ccb_ptr->cpi.bus_id == bus_id && 1491 mpt_cmd->ccb_ptr->ccb_h.target_id == tgt_id) { 1492 device_printf(sc->mrsas_dev, 1493 "IO commands pending to target id %d\n", tgt_id); 1494 return FAIL; 1495 } 1496 } 1497 } 1498 1499 return SUCCESS; 1500 } 1501 1502 #if TM_DEBUG 1503 /* 1504 * mrsas_tm_response_code: Prints TM response code received from FW 1505 * input: Adapter instance soft state 1506 * MPI reply returned from firmware 1507 * 1508 * Returns nothing. 1509 */ 1510 static void 1511 mrsas_tm_response_code(struct mrsas_softc *sc, 1512 MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply) 1513 { 1514 char *desc; 1515 1516 switch (mpi_reply->ResponseCode) { 1517 case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: 1518 desc = "task management request completed"; 1519 break; 1520 case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: 1521 desc = "invalid frame"; 1522 break; 1523 case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: 1524 desc = "task management request not supported"; 1525 break; 1526 case MPI2_SCSITASKMGMT_RSP_TM_FAILED: 1527 desc = "task management request failed"; 1528 break; 1529 case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: 1530 desc = "task management request succeeded"; 1531 break; 1532 case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: 1533 desc = "invalid lun"; 1534 break; 1535 case 0xA: 1536 desc = "overlapped tag attempted"; 1537 break; 1538 case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: 1539 desc = "task queued, however not sent to target"; 1540 break; 1541 default: 1542 desc = "unknown"; 1543 break; 1544 } 1545 device_printf(sc->mrsas_dev, "response_code(%01x): %s\n", 1546 mpi_reply->ResponseCode, desc); 1547 device_printf(sc->mrsas_dev, 1548 "TerminationCount/DevHandle/Function/TaskType/IOCStat/IOCLoginfo\n" 1549 "0x%x/0x%x/0x%x/0x%x/0x%x/0x%x\n", 1550 mpi_reply->TerminationCount, mpi_reply->DevHandle, 1551 mpi_reply->Function, mpi_reply->TaskType, 1552 mpi_reply->IOCStatus, mpi_reply->IOCLogInfo); 1553 } 1554 #endif 1555 1556 /* 1557 * mrsas_issue_tm: Fires the TM command to FW and waits for completion 1558 * input: Adapter instance soft state 1559 * reqest descriptor compiled by mrsas_reset_targets 1560 * 1561 * Returns FAIL if TM command TIMEDOUT from FW else SUCCESS. 1562 */ 1563 static int 1564 mrsas_issue_tm(struct mrsas_softc *sc, 1565 MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc) 1566 { 1567 int sleep_stat; 1568 1569 mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); 1570 sleep_stat = msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "tm_sleep", 50*hz); 1571 1572 if (sleep_stat == EWOULDBLOCK) { 1573 device_printf(sc->mrsas_dev, "tm cmd TIMEDOUT\n"); 1574 return FAIL; 1575 } 1576 1577 return SUCCESS; 1578 } 1579 1580 /* 1581 * mrsas_reset_targets : Gathers info to fire a target reset command 1582 * input: Adapter instance soft state 1583 * 1584 * This function compiles data for a target reset command to be fired to the FW 1585 * and then traverse the target_reset_pool to see targets with TIMEDOUT IOs. 1586 * 1587 * Returns SUCCESS or FAIL 1588 */ 1589 int mrsas_reset_targets(struct mrsas_softc *sc) 1590 { 1591 struct mrsas_mpt_cmd *tm_mpt_cmd = NULL; 1592 struct mrsas_mpt_cmd *tgt_mpt_cmd = NULL; 1593 MR_TASK_MANAGE_REQUEST *mr_request; 1594 MPI2_SCSI_TASK_MANAGE_REQUEST *tm_mpi_request; 1595 MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; 1596 int retCode = FAIL, count, i, outstanding; 1597 u_int32_t MSIxIndex, bus_id; 1598 target_id_t tgt_id; 1599 #if TM_DEBUG 1600 MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply; 1601 #endif 1602 1603 outstanding = mrsas_atomic_read(&sc->fw_outstanding); 1604 1605 if (!outstanding) { 1606 device_printf(sc->mrsas_dev, "NO IOs pending...\n"); 1607 mrsas_atomic_set(&sc->target_reset_outstanding, 0); 1608 retCode = SUCCESS; 1609 goto return_status; 1610 } else if (sc->adprecovery != MRSAS_HBA_OPERATIONAL) { 1611 device_printf(sc->mrsas_dev, "Controller is not operational\n"); 1612 goto return_status; 1613 } else { 1614 /* Some more error checks will be added in future */ 1615 } 1616 1617 /* Get an mpt frame and an index to fire the TM cmd */ 1618 tm_mpt_cmd = mrsas_get_mpt_cmd(sc); 1619 if (!tm_mpt_cmd) { 1620 retCode = FAIL; 1621 goto return_status; 1622 } 1623 1624 req_desc = mrsas_get_request_desc(sc, (tm_mpt_cmd->index) - 1); 1625 if (!req_desc) { 1626 device_printf(sc->mrsas_dev, "Cannot get request_descriptor for tm.\n"); 1627 retCode = FAIL; 1628 goto release_mpt; 1629 } 1630 memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION)); 1631 1632 req_desc->HighPriority.SMID = tm_mpt_cmd->index; 1633 req_desc->HighPriority.RequestFlags = 1634 (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY << 1635 MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); 1636 req_desc->HighPriority.MSIxIndex = 0; 1637 req_desc->HighPriority.LMID = 0; 1638 req_desc->HighPriority.Reserved1 = 0; 1639 tm_mpt_cmd->request_desc = req_desc; 1640 1641 mr_request = (MR_TASK_MANAGE_REQUEST *) tm_mpt_cmd->io_request; 1642 memset(mr_request, 0, sizeof(MR_TASK_MANAGE_REQUEST)); 1643 1644 tm_mpi_request = (MPI2_SCSI_TASK_MANAGE_REQUEST *) &mr_request->TmRequest; 1645 tm_mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; 1646 tm_mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; 1647 tm_mpi_request->TaskMID = 0; /* smid task */ 1648 tm_mpi_request->LUN[1] = 0; 1649 1650 /* Traverse the tm_mpt pool to get valid entries */ 1651 for (i = 0 ; i < MRSAS_MAX_TM_TARGETS; i++) { 1652 if(!sc->target_reset_pool[i]) { 1653 continue; 1654 } else { 1655 tgt_mpt_cmd = sc->target_reset_pool[i]; 1656 } 1657 1658 tgt_id = i; 1659 1660 /* See if the target is tm capable or NOT */ 1661 if (!tgt_mpt_cmd->tmCapable) { 1662 device_printf(sc->mrsas_dev, "Task management NOT SUPPORTED for " 1663 "CAM target:%d\n", tgt_id); 1664 1665 retCode = FAIL; 1666 goto release_mpt; 1667 } 1668 1669 tm_mpi_request->DevHandle = tgt_mpt_cmd->io_request->DevHandle; 1670 1671 if (i < (MRSAS_MAX_PD - 1)) { 1672 mr_request->uTmReqReply.tmReqFlags.isTMForPD = 1; 1673 bus_id = 0; 1674 } else { 1675 mr_request->uTmReqReply.tmReqFlags.isTMForLD = 1; 1676 bus_id = 1; 1677 } 1678 1679 device_printf(sc->mrsas_dev, "TM will be fired for " 1680 "CAM target:%d and bus_id %d\n", tgt_id, bus_id); 1681 1682 sc->ocr_chan = (void *)&tm_mpt_cmd; 1683 retCode = mrsas_issue_tm(sc, req_desc); 1684 if (retCode == FAIL) 1685 goto release_mpt; 1686 1687 #if TM_DEBUG 1688 mpi_reply = 1689 (MPI2_SCSI_TASK_MANAGE_REPLY *) &mr_request->uTmReqReply.TMReply; 1690 mrsas_tm_response_code(sc, mpi_reply); 1691 #endif 1692 mrsas_atomic_dec(&sc->target_reset_outstanding); 1693 sc->target_reset_pool[i] = NULL; 1694 1695 /* Check for pending cmds in the mpt_cmd_pool with the tgt_id */ 1696 mrsas_disable_intr(sc); 1697 /* Wait for 1 second to complete parallel ISR calling same 1698 * mrsas_complete_cmd() 1699 */ 1700 msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "mrsas_reset_wakeup", 1701 1 * hz); 1702 count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; 1703 mtx_unlock(&sc->sim_lock); 1704 for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++) 1705 mrsas_complete_cmd(sc, MSIxIndex); 1706 mtx_lock(&sc->sim_lock); 1707 retCode = mrsas_track_scsiio(sc, tgt_id, bus_id); 1708 mrsas_enable_intr(sc); 1709 1710 if (retCode == FAIL) 1711 goto release_mpt; 1712 } 1713 1714 device_printf(sc->mrsas_dev, "Number of targets outstanding " 1715 "after reset: %d\n", mrsas_atomic_read(&sc->target_reset_outstanding)); 1716 1717 release_mpt: 1718 mrsas_release_mpt_cmd(tm_mpt_cmd); 1719 return_status: 1720 device_printf(sc->mrsas_dev, "target reset %s!!\n", 1721 (retCode == SUCCESS) ? "SUCCESS" : "FAIL"); 1722 1723 return retCode; 1724 } 1725 1726