xref: /freebsd/sys/dev/mrsas/mrsas.c (revision f6a3b357e9be4c6423c85eff9a847163a0d307c8)
1 /*
2  * Copyright (c) 2015, AVAGO Tech. All rights reserved. Author: Marian Choy
3  * Copyright (c) 2014, LSI Corp. All rights reserved. Author: Marian Choy
4  * Support: freebsdraid@avagotech.com
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are
8  * met:
9  *
10  * 1. Redistributions of source code must retain the above copyright notice,
11  * this list of conditions and the following disclaimer. 2. Redistributions
12  * in binary form must reproduce the above copyright notice, this list of
13  * conditions and the following disclaimer in the documentation and/or other
14  * materials provided with the distribution. 3. Neither the name of the
15  * <ORGANIZATION> nor the names of its contributors may be used to endorse or
16  * promote products derived from this software without specific prior written
17  * permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
23  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  *
31  * The views and conclusions contained in the software and documentation are
32  * those of the authors and should not be interpreted as representing
33  * official policies,either expressed or implied, of the FreeBSD Project.
34  *
35  * Send feedback to: <megaraidfbsd@avagotech.com> Mail to: AVAGO TECHNOLOGIES 1621
36  * Barber Lane, Milpitas, CA 95035 ATTN: MegaRaid FreeBSD
37  *
38  */
39 
40 #include <sys/cdefs.h>
41 __FBSDID("$FreeBSD$");
42 
43 #include <dev/mrsas/mrsas.h>
44 #include <dev/mrsas/mrsas_ioctl.h>
45 
46 #include <cam/cam.h>
47 #include <cam/cam_ccb.h>
48 
49 #include <sys/sysctl.h>
50 #include <sys/types.h>
51 #include <sys/sysent.h>
52 #include <sys/kthread.h>
53 #include <sys/taskqueue.h>
54 #include <sys/smp.h>
55 
56 
57 /*
58  * Function prototypes
59  */
60 static d_open_t mrsas_open;
61 static d_close_t mrsas_close;
62 static d_read_t mrsas_read;
63 static d_write_t mrsas_write;
64 static d_ioctl_t mrsas_ioctl;
65 static d_poll_t mrsas_poll;
66 
67 static void mrsas_ich_startup(void *arg);
68 static struct mrsas_mgmt_info mrsas_mgmt_info;
69 static struct mrsas_ident *mrsas_find_ident(device_t);
70 static int mrsas_setup_msix(struct mrsas_softc *sc);
71 static int mrsas_allocate_msix(struct mrsas_softc *sc);
72 static void mrsas_shutdown_ctlr(struct mrsas_softc *sc, u_int32_t opcode);
73 static void mrsas_flush_cache(struct mrsas_softc *sc);
74 static void mrsas_reset_reply_desc(struct mrsas_softc *sc);
75 static void mrsas_ocr_thread(void *arg);
76 static int mrsas_get_map_info(struct mrsas_softc *sc);
77 static int mrsas_get_ld_map_info(struct mrsas_softc *sc);
78 static int mrsas_sync_map_info(struct mrsas_softc *sc);
79 static int mrsas_get_pd_list(struct mrsas_softc *sc);
80 static int mrsas_get_ld_list(struct mrsas_softc *sc);
81 static int mrsas_setup_irq(struct mrsas_softc *sc);
82 static int mrsas_alloc_mem(struct mrsas_softc *sc);
83 static int mrsas_init_fw(struct mrsas_softc *sc);
84 static int mrsas_setup_raidmap(struct mrsas_softc *sc);
85 static void megasas_setup_jbod_map(struct mrsas_softc *sc);
86 static int megasas_sync_pd_seq_num(struct mrsas_softc *sc, boolean_t pend);
87 static int mrsas_clear_intr(struct mrsas_softc *sc);
88 static int mrsas_get_ctrl_info(struct mrsas_softc *sc);
89 static void mrsas_update_ext_vd_details(struct mrsas_softc *sc);
90 static int
91 mrsas_issue_blocked_abort_cmd(struct mrsas_softc *sc,
92     struct mrsas_mfi_cmd *cmd_to_abort);
93 static void
94 mrsas_get_pd_info(struct mrsas_softc *sc, u_int16_t device_id);
95 static struct mrsas_softc *
96 mrsas_get_softc_instance(struct cdev *dev,
97     u_long cmd, caddr_t arg);
98 u_int32_t
99 mrsas_read_reg_with_retries(struct mrsas_softc *sc, int offset);
100 u_int32_t mrsas_read_reg(struct mrsas_softc *sc, int offset);
101 u_int8_t
102 mrsas_build_mptmfi_passthru(struct mrsas_softc *sc,
103     struct mrsas_mfi_cmd *mfi_cmd);
104 void	mrsas_complete_outstanding_ioctls(struct mrsas_softc *sc);
105 int	mrsas_transition_to_ready(struct mrsas_softc *sc, int ocr);
106 int	mrsas_init_adapter(struct mrsas_softc *sc);
107 int	mrsas_alloc_mpt_cmds(struct mrsas_softc *sc);
108 int	mrsas_alloc_ioc_cmd(struct mrsas_softc *sc);
109 int	mrsas_alloc_ctlr_info_cmd(struct mrsas_softc *sc);
110 int	mrsas_ioc_init(struct mrsas_softc *sc);
111 int	mrsas_bus_scan(struct mrsas_softc *sc);
112 int	mrsas_issue_dcmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
113 int	mrsas_issue_polled(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
114 int	mrsas_reset_ctrl(struct mrsas_softc *sc, u_int8_t reset_reason);
115 int	mrsas_wait_for_outstanding(struct mrsas_softc *sc, u_int8_t check_reason);
116 int mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex);
117 int mrsas_reset_targets(struct mrsas_softc *sc);
118 int
119 mrsas_issue_blocked_cmd(struct mrsas_softc *sc,
120     struct mrsas_mfi_cmd *cmd);
121 int
122 mrsas_alloc_tmp_dcmd(struct mrsas_softc *sc, struct mrsas_tmp_dcmd *tcmd,
123     int size);
124 void	mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd);
125 void	mrsas_wakeup(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
126 void	mrsas_complete_aen(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
127 void	mrsas_complete_abort(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
128 void	mrsas_disable_intr(struct mrsas_softc *sc);
129 void	mrsas_enable_intr(struct mrsas_softc *sc);
130 void	mrsas_free_ioc_cmd(struct mrsas_softc *sc);
131 void	mrsas_free_mem(struct mrsas_softc *sc);
132 void	mrsas_free_tmp_dcmd(struct mrsas_tmp_dcmd *tmp);
133 void	mrsas_isr(void *arg);
134 void	mrsas_teardown_intr(struct mrsas_softc *sc);
135 void	mrsas_addr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error);
136 void	mrsas_kill_hba(struct mrsas_softc *sc);
137 void	mrsas_aen_handler(struct mrsas_softc *sc);
138 void
139 mrsas_write_reg(struct mrsas_softc *sc, int offset,
140     u_int32_t value);
141 void
142 mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo,
143     u_int32_t req_desc_hi);
144 void	mrsas_free_ctlr_info_cmd(struct mrsas_softc *sc);
145 void
146 mrsas_complete_mptmfi_passthru(struct mrsas_softc *sc,
147     struct mrsas_mfi_cmd *cmd, u_int8_t status);
148 struct mrsas_mfi_cmd *mrsas_get_mfi_cmd(struct mrsas_softc *sc);
149 
150 MRSAS_REQUEST_DESCRIPTOR_UNION *mrsas_build_mpt_cmd
151         (struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
152 
153 extern int mrsas_cam_attach(struct mrsas_softc *sc);
154 extern void mrsas_cam_detach(struct mrsas_softc *sc);
155 extern void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd);
156 extern void mrsas_free_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
157 extern int mrsas_alloc_mfi_cmds(struct mrsas_softc *sc);
158 extern struct mrsas_mpt_cmd *mrsas_get_mpt_cmd(struct mrsas_softc *sc);
159 extern int mrsas_passthru(struct mrsas_softc *sc, void *arg, u_long ioctlCmd);
160 extern uint8_t MR_ValidateMapInfo(struct mrsas_softc *sc);
161 extern u_int16_t MR_GetLDTgtId(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map);
162 extern MR_LD_RAID *MR_LdRaidGet(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map);
163 extern void mrsas_xpt_freeze(struct mrsas_softc *sc);
164 extern void mrsas_xpt_release(struct mrsas_softc *sc);
165 extern MRSAS_REQUEST_DESCRIPTOR_UNION *
166 mrsas_get_request_desc(struct mrsas_softc *sc,
167     u_int16_t index);
168 extern int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim);
169 static int mrsas_alloc_evt_log_info_cmd(struct mrsas_softc *sc);
170 static void mrsas_free_evt_log_info_cmd(struct mrsas_softc *sc);
171 void	mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd);
172 
173 void mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd,
174 	union ccb *ccb_ptr, u_int8_t status, u_int8_t extStatus,
175 	u_int32_t data_length, u_int8_t *sense);
176 void
177 mrsas_write_64bit_req_desc(struct mrsas_softc *sc, u_int32_t req_desc_lo,
178     u_int32_t req_desc_hi);
179 
180 
181 SYSCTL_NODE(_hw, OID_AUTO, mrsas, CTLFLAG_RD, 0, "MRSAS Driver Parameters");
182 
183 /*
184  * PCI device struct and table
185  *
186  */
187 typedef struct mrsas_ident {
188 	uint16_t vendor;
189 	uint16_t device;
190 	uint16_t subvendor;
191 	uint16_t subdevice;
192 	const char *desc;
193 }	MRSAS_CTLR_ID;
194 
195 MRSAS_CTLR_ID device_table[] = {
196 	{0x1000, MRSAS_TBOLT, 0xffff, 0xffff, "AVAGO Thunderbolt SAS Controller"},
197 	{0x1000, MRSAS_INVADER, 0xffff, 0xffff, "AVAGO Invader SAS Controller"},
198 	{0x1000, MRSAS_FURY, 0xffff, 0xffff, "AVAGO Fury SAS Controller"},
199 	{0x1000, MRSAS_INTRUDER, 0xffff, 0xffff, "AVAGO Intruder SAS Controller"},
200 	{0x1000, MRSAS_INTRUDER_24, 0xffff, 0xffff, "AVAGO Intruder_24 SAS Controller"},
201 	{0x1000, MRSAS_CUTLASS_52, 0xffff, 0xffff, "AVAGO Cutlass_52 SAS Controller"},
202 	{0x1000, MRSAS_CUTLASS_53, 0xffff, 0xffff, "AVAGO Cutlass_53 SAS Controller"},
203 	{0x1000, MRSAS_VENTURA, 0xffff, 0xffff, "AVAGO Ventura SAS Controller"},
204 	{0x1000, MRSAS_CRUSADER, 0xffff, 0xffff, "AVAGO Crusader SAS Controller"},
205 	{0x1000, MRSAS_HARPOON, 0xffff, 0xffff, "AVAGO Harpoon SAS Controller"},
206 	{0x1000, MRSAS_TOMCAT, 0xffff, 0xffff, "AVAGO Tomcat SAS Controller"},
207 	{0x1000, MRSAS_VENTURA_4PORT, 0xffff, 0xffff, "AVAGO Ventura_4Port SAS Controller"},
208 	{0x1000, MRSAS_CRUSADER_4PORT, 0xffff, 0xffff, "AVAGO Crusader_4Port SAS Controller"},
209 	{0x1000, MRSAS_AERO_10E0, 0xffff, 0xffff, "BROADCOM AERO-10E0 SAS Controller"},
210 	{0x1000, MRSAS_AERO_10E1, 0xffff, 0xffff, "BROADCOM AERO-10E1 SAS Controller"},
211 	{0x1000, MRSAS_AERO_10E2, 0xffff, 0xffff, "BROADCOM AERO-10E2 SAS Controller"},
212 	{0x1000, MRSAS_AERO_10E3, 0xffff, 0xffff, "BROADCOM AERO-10E3 SAS Controller"},
213 	{0x1000, MRSAS_AERO_10E4, 0xffff, 0xffff, "BROADCOM AERO-10E4 SAS Controller"},
214 	{0x1000, MRSAS_AERO_10E5, 0xffff, 0xffff, "BROADCOM AERO-10E5 SAS Controller"},
215 	{0x1000, MRSAS_AERO_10E6, 0xffff, 0xffff, "BROADCOM AERO-10E6 SAS Controller"},
216 	{0x1000, MRSAS_AERO_10E7, 0xffff, 0xffff, "BROADCOM AERO-10E7 SAS Controller"},
217 	{0, 0, 0, 0, NULL}
218 };
219 
220 /*
221  * Character device entry points
222  *
223  */
224 static struct cdevsw mrsas_cdevsw = {
225 	.d_version = D_VERSION,
226 	.d_open = mrsas_open,
227 	.d_close = mrsas_close,
228 	.d_read = mrsas_read,
229 	.d_write = mrsas_write,
230 	.d_ioctl = mrsas_ioctl,
231 	.d_poll = mrsas_poll,
232 	.d_name = "mrsas",
233 };
234 
235 MALLOC_DEFINE(M_MRSAS, "mrsasbuf", "Buffers for the MRSAS driver");
236 
237 /*
238  * In the cdevsw routines, we find our softc by using the si_drv1 member of
239  * struct cdev.  We set this variable to point to our softc in our attach
240  * routine when we create the /dev entry.
241  */
242 int
243 mrsas_open(struct cdev *dev, int oflags, int devtype, struct thread *td)
244 {
245 	struct mrsas_softc *sc;
246 
247 	sc = dev->si_drv1;
248 	return (0);
249 }
250 
251 int
252 mrsas_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
253 {
254 	struct mrsas_softc *sc;
255 
256 	sc = dev->si_drv1;
257 	return (0);
258 }
259 
260 int
261 mrsas_read(struct cdev *dev, struct uio *uio, int ioflag)
262 {
263 	struct mrsas_softc *sc;
264 
265 	sc = dev->si_drv1;
266 	return (0);
267 }
268 int
269 mrsas_write(struct cdev *dev, struct uio *uio, int ioflag)
270 {
271 	struct mrsas_softc *sc;
272 
273 	sc = dev->si_drv1;
274 	return (0);
275 }
276 
277 u_int32_t
278 mrsas_read_reg_with_retries(struct mrsas_softc *sc, int offset)
279 {
280 	u_int32_t i = 0, ret_val;
281 
282 	if (sc->is_aero) {
283 		do {
284 			ret_val = mrsas_read_reg(sc, offset);
285 			i++;
286 		} while(ret_val == 0 && i < 3);
287 	} else
288 		ret_val = mrsas_read_reg(sc, offset);
289 
290 	return ret_val;
291 }
292 
293 /*
294  * Register Read/Write Functions
295  *
296  */
297 void
298 mrsas_write_reg(struct mrsas_softc *sc, int offset,
299     u_int32_t value)
300 {
301 	bus_space_tag_t bus_tag = sc->bus_tag;
302 	bus_space_handle_t bus_handle = sc->bus_handle;
303 
304 	bus_space_write_4(bus_tag, bus_handle, offset, value);
305 }
306 
307 u_int32_t
308 mrsas_read_reg(struct mrsas_softc *sc, int offset)
309 {
310 	bus_space_tag_t bus_tag = sc->bus_tag;
311 	bus_space_handle_t bus_handle = sc->bus_handle;
312 
313 	return ((u_int32_t)bus_space_read_4(bus_tag, bus_handle, offset));
314 }
315 
316 
317 /*
318  * Interrupt Disable/Enable/Clear Functions
319  *
320  */
321 void
322 mrsas_disable_intr(struct mrsas_softc *sc)
323 {
324 	u_int32_t mask = 0xFFFFFFFF;
325 	u_int32_t status;
326 
327 	sc->mask_interrupts = 1;
328 	mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask), mask);
329 	/* Dummy read to force pci flush */
330 	status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask));
331 }
332 
333 void
334 mrsas_enable_intr(struct mrsas_softc *sc)
335 {
336 	u_int32_t mask = MFI_FUSION_ENABLE_INTERRUPT_MASK;
337 	u_int32_t status;
338 
339 	sc->mask_interrupts = 0;
340 	mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status), ~0);
341 	status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status));
342 
343 	mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask), ~mask);
344 	status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask));
345 }
346 
347 static int
348 mrsas_clear_intr(struct mrsas_softc *sc)
349 {
350 	u_int32_t status;
351 
352 	/* Read received interrupt */
353 	status = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, outbound_intr_status));
354 
355 	/* Not our interrupt, so just return */
356 	if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK))
357 		return (0);
358 
359 	/* We got a reply interrupt */
360 	return (1);
361 }
362 
363 /*
364  * PCI Support Functions
365  *
366  */
367 static struct mrsas_ident *
368 mrsas_find_ident(device_t dev)
369 {
370 	struct mrsas_ident *pci_device;
371 
372 	for (pci_device = device_table; pci_device->vendor != 0; pci_device++) {
373 		if ((pci_device->vendor == pci_get_vendor(dev)) &&
374 		    (pci_device->device == pci_get_device(dev)) &&
375 		    ((pci_device->subvendor == pci_get_subvendor(dev)) ||
376 		    (pci_device->subvendor == 0xffff)) &&
377 		    ((pci_device->subdevice == pci_get_subdevice(dev)) ||
378 		    (pci_device->subdevice == 0xffff)))
379 			return (pci_device);
380 	}
381 	return (NULL);
382 }
383 
384 static int
385 mrsas_probe(device_t dev)
386 {
387 	static u_int8_t first_ctrl = 1;
388 	struct mrsas_ident *id;
389 
390 	if ((id = mrsas_find_ident(dev)) != NULL) {
391 		if (first_ctrl) {
392 			printf("AVAGO MegaRAID SAS FreeBSD mrsas driver version: %s\n",
393 			    MRSAS_VERSION);
394 			first_ctrl = 0;
395 		}
396 		device_set_desc(dev, id->desc);
397 		/* between BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY */
398 		return (-30);
399 	}
400 	return (ENXIO);
401 }
402 
403 /*
404  * mrsas_setup_sysctl:	setup sysctl values for mrsas
405  * input:				Adapter instance soft state
406  *
407  * Setup sysctl entries for mrsas driver.
408  */
409 static void
410 mrsas_setup_sysctl(struct mrsas_softc *sc)
411 {
412 	struct sysctl_ctx_list *sysctl_ctx = NULL;
413 	struct sysctl_oid *sysctl_tree = NULL;
414 	char tmpstr[80], tmpstr2[80];
415 
416 	/*
417 	 * Setup the sysctl variable so the user can change the debug level
418 	 * on the fly.
419 	 */
420 	snprintf(tmpstr, sizeof(tmpstr), "MRSAS controller %d",
421 	    device_get_unit(sc->mrsas_dev));
422 	snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mrsas_dev));
423 
424 	sysctl_ctx = device_get_sysctl_ctx(sc->mrsas_dev);
425 	if (sysctl_ctx != NULL)
426 		sysctl_tree = device_get_sysctl_tree(sc->mrsas_dev);
427 
428 	if (sysctl_tree == NULL) {
429 		sysctl_ctx_init(&sc->sysctl_ctx);
430 		sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
431 		    SYSCTL_STATIC_CHILDREN(_hw_mrsas), OID_AUTO, tmpstr2,
432 		    CTLFLAG_RD, 0, tmpstr);
433 		if (sc->sysctl_tree == NULL)
434 			return;
435 		sysctl_ctx = &sc->sysctl_ctx;
436 		sysctl_tree = sc->sysctl_tree;
437 	}
438 	SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
439 	    OID_AUTO, "disable_ocr", CTLFLAG_RW, &sc->disableOnlineCtrlReset, 0,
440 	    "Disable the use of OCR");
441 
442 	SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
443 	    OID_AUTO, "driver_version", CTLFLAG_RD, MRSAS_VERSION,
444 	    strlen(MRSAS_VERSION), "driver version");
445 
446 	SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
447 	    OID_AUTO, "reset_count", CTLFLAG_RD,
448 	    &sc->reset_count, 0, "number of ocr from start of the day");
449 
450 	SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
451 	    OID_AUTO, "fw_outstanding", CTLFLAG_RD,
452 	    &sc->fw_outstanding.val_rdonly, 0, "FW outstanding commands");
453 
454 	SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
455 	    OID_AUTO, "io_cmds_highwater", CTLFLAG_RD,
456 	    &sc->io_cmds_highwater, 0, "Max FW outstanding commands");
457 
458 	SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
459 	    OID_AUTO, "mrsas_debug", CTLFLAG_RW, &sc->mrsas_debug, 0,
460 	    "Driver debug level");
461 
462 	SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
463 	    OID_AUTO, "mrsas_io_timeout", CTLFLAG_RW, &sc->mrsas_io_timeout,
464 	    0, "Driver IO timeout value in mili-second.");
465 
466 	SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
467 	    OID_AUTO, "mrsas_fw_fault_check_delay", CTLFLAG_RW,
468 	    &sc->mrsas_fw_fault_check_delay,
469 	    0, "FW fault check thread delay in seconds. <default is 1 sec>");
470 
471 	SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
472 	    OID_AUTO, "reset_in_progress", CTLFLAG_RD,
473 	    &sc->reset_in_progress, 0, "ocr in progress status");
474 
475 	SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
476 	    OID_AUTO, "block_sync_cache", CTLFLAG_RW,
477 	    &sc->block_sync_cache, 0,
478 	    "Block SYNC CACHE at driver. <default: 0, send it to FW>");
479 	SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
480 	    OID_AUTO, "stream detection", CTLFLAG_RW,
481 		&sc->drv_stream_detection, 0,
482 		"Disable/Enable Stream detection. <default: 1, Enable Stream Detection>");
483 	SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
484 	    OID_AUTO, "prp_count", CTLFLAG_RD,
485 	    &sc->prp_count.val_rdonly, 0, "Number of IOs for which PRPs are built");
486 	SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree),
487 	    OID_AUTO, "SGE holes", CTLFLAG_RD,
488 	    &sc->sge_holes.val_rdonly, 0, "Number of IOs with holes in SGEs");
489 }
490 
491 /*
492  * mrsas_get_tunables:	get tunable parameters.
493  * input:				Adapter instance soft state
494  *
495  * Get tunable parameters. This will help to debug driver at boot time.
496  */
497 static void
498 mrsas_get_tunables(struct mrsas_softc *sc)
499 {
500 	char tmpstr[80];
501 
502 	/* XXX default to some debugging for now */
503 	sc->mrsas_debug =
504 		(MRSAS_FAULT | MRSAS_OCR | MRSAS_INFO | MRSAS_TRACE | MRSAS_AEN);
505 	sc->mrsas_io_timeout = MRSAS_IO_TIMEOUT;
506 	sc->mrsas_fw_fault_check_delay = 1;
507 	sc->reset_count = 0;
508 	sc->reset_in_progress = 0;
509 	sc->block_sync_cache = 0;
510 	sc->drv_stream_detection = 1;
511 
512 	/*
513 	 * Grab the global variables.
514 	 */
515 	TUNABLE_INT_FETCH("hw.mrsas.debug_level", &sc->mrsas_debug);
516 
517 	/*
518 	 * Grab the global variables.
519 	 */
520 	TUNABLE_INT_FETCH("hw.mrsas.lb_pending_cmds", &sc->lb_pending_cmds);
521 
522 	/* Grab the unit-instance variables */
523 	snprintf(tmpstr, sizeof(tmpstr), "dev.mrsas.%d.debug_level",
524 	    device_get_unit(sc->mrsas_dev));
525 	TUNABLE_INT_FETCH(tmpstr, &sc->mrsas_debug);
526 }
527 
528 /*
529  * mrsas_alloc_evt_log_info cmd: Allocates memory to get event log information.
530  * Used to get sequence number at driver load time.
531  * input:		Adapter soft state
532  *
533  * Allocates DMAable memory for the event log info internal command.
534  */
535 int
536 mrsas_alloc_evt_log_info_cmd(struct mrsas_softc *sc)
537 {
538 	int el_info_size;
539 
540 	/* Allocate get event log info command */
541 	el_info_size = sizeof(struct mrsas_evt_log_info);
542 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
543 	    1, 0,
544 	    BUS_SPACE_MAXADDR_32BIT,
545 	    BUS_SPACE_MAXADDR,
546 	    NULL, NULL,
547 	    el_info_size,
548 	    1,
549 	    el_info_size,
550 	    BUS_DMA_ALLOCNOW,
551 	    NULL, NULL,
552 	    &sc->el_info_tag)) {
553 		device_printf(sc->mrsas_dev, "Cannot allocate event log info tag\n");
554 		return (ENOMEM);
555 	}
556 	if (bus_dmamem_alloc(sc->el_info_tag, (void **)&sc->el_info_mem,
557 	    BUS_DMA_NOWAIT, &sc->el_info_dmamap)) {
558 		device_printf(sc->mrsas_dev, "Cannot allocate event log info cmd mem\n");
559 		return (ENOMEM);
560 	}
561 	if (bus_dmamap_load(sc->el_info_tag, sc->el_info_dmamap,
562 	    sc->el_info_mem, el_info_size, mrsas_addr_cb,
563 	    &sc->el_info_phys_addr, BUS_DMA_NOWAIT)) {
564 		device_printf(sc->mrsas_dev, "Cannot load event log info cmd mem\n");
565 		return (ENOMEM);
566 	}
567 	memset(sc->el_info_mem, 0, el_info_size);
568 	return (0);
569 }
570 
571 /*
572  * mrsas_free_evt_info_cmd:	Free memory for Event log info command
573  * input:					Adapter soft state
574  *
575  * Deallocates memory for the event log info internal command.
576  */
577 void
578 mrsas_free_evt_log_info_cmd(struct mrsas_softc *sc)
579 {
580 	if (sc->el_info_phys_addr)
581 		bus_dmamap_unload(sc->el_info_tag, sc->el_info_dmamap);
582 	if (sc->el_info_mem != NULL)
583 		bus_dmamem_free(sc->el_info_tag, sc->el_info_mem, sc->el_info_dmamap);
584 	if (sc->el_info_tag != NULL)
585 		bus_dma_tag_destroy(sc->el_info_tag);
586 }
587 
588 /*
589  *  mrsas_get_seq_num:	Get latest event sequence number
590  *  @sc:				Adapter soft state
591  *  @eli:				Firmware event log sequence number information.
592  *
593  * Firmware maintains a log of all events in a non-volatile area.
594  * Driver get the sequence number using DCMD
595  * "MR_DCMD_CTRL_EVENT_GET_INFO" at driver load time.
596  */
597 
598 static int
599 mrsas_get_seq_num(struct mrsas_softc *sc,
600     struct mrsas_evt_log_info *eli)
601 {
602 	struct mrsas_mfi_cmd *cmd;
603 	struct mrsas_dcmd_frame *dcmd;
604 	u_int8_t do_ocr = 1, retcode = 0;
605 
606 	cmd = mrsas_get_mfi_cmd(sc);
607 
608 	if (!cmd) {
609 		device_printf(sc->mrsas_dev, "Failed to get a free cmd\n");
610 		return -ENOMEM;
611 	}
612 	dcmd = &cmd->frame->dcmd;
613 
614 	if (mrsas_alloc_evt_log_info_cmd(sc) != SUCCESS) {
615 		device_printf(sc->mrsas_dev, "Cannot allocate evt log info cmd\n");
616 		mrsas_release_mfi_cmd(cmd);
617 		return -ENOMEM;
618 	}
619 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
620 
621 	dcmd->cmd = MFI_CMD_DCMD;
622 	dcmd->cmd_status = 0x0;
623 	dcmd->sge_count = 1;
624 	dcmd->flags = MFI_FRAME_DIR_READ;
625 	dcmd->timeout = 0;
626 	dcmd->pad_0 = 0;
627 	dcmd->data_xfer_len = sizeof(struct mrsas_evt_log_info);
628 	dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO;
629 	dcmd->sgl.sge32[0].phys_addr = sc->el_info_phys_addr;
630 	dcmd->sgl.sge32[0].length = sizeof(struct mrsas_evt_log_info);
631 
632 	retcode = mrsas_issue_blocked_cmd(sc, cmd);
633 	if (retcode == ETIMEDOUT)
634 		goto dcmd_timeout;
635 
636 	do_ocr = 0;
637 	/*
638 	 * Copy the data back into callers buffer
639 	 */
640 	memcpy(eli, sc->el_info_mem, sizeof(struct mrsas_evt_log_info));
641 	mrsas_free_evt_log_info_cmd(sc);
642 
643 dcmd_timeout:
644 	if (do_ocr)
645 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
646 	else
647 		mrsas_release_mfi_cmd(cmd);
648 
649 	return retcode;
650 }
651 
652 
653 /*
654  *  mrsas_register_aen:		Register for asynchronous event notification
655  *  @sc:			Adapter soft state
656  *  @seq_num:			Starting sequence number
657  *  @class_locale:		Class of the event
658  *
659  *  This function subscribes for events beyond the @seq_num
660  *  and type @class_locale.
661  *
662  */
663 static int
664 mrsas_register_aen(struct mrsas_softc *sc, u_int32_t seq_num,
665     u_int32_t class_locale_word)
666 {
667 	int ret_val;
668 	struct mrsas_mfi_cmd *cmd;
669 	struct mrsas_dcmd_frame *dcmd;
670 	union mrsas_evt_class_locale curr_aen;
671 	union mrsas_evt_class_locale prev_aen;
672 
673 	/*
674 	 * If there an AEN pending already (aen_cmd), check if the
675 	 * class_locale of that pending AEN is inclusive of the new AEN
676 	 * request we currently have. If it is, then we don't have to do
677 	 * anything. In other words, whichever events the current AEN request
678 	 * is subscribing to, have already been subscribed to. If the old_cmd
679 	 * is _not_ inclusive, then we have to abort that command, form a
680 	 * class_locale that is superset of both old and current and re-issue
681 	 * to the FW
682 	 */
683 
684 	curr_aen.word = class_locale_word;
685 
686 	if (sc->aen_cmd) {
687 
688 		prev_aen.word = sc->aen_cmd->frame->dcmd.mbox.w[1];
689 
690 		/*
691 		 * A class whose enum value is smaller is inclusive of all
692 		 * higher values. If a PROGRESS (= -1) was previously
693 		 * registered, then a new registration requests for higher
694 		 * classes need not be sent to FW. They are automatically
695 		 * included. Locale numbers don't have such hierarchy. They
696 		 * are bitmap values
697 		 */
698 		if ((prev_aen.members.class <= curr_aen.members.class) &&
699 		    !((prev_aen.members.locale & curr_aen.members.locale) ^
700 		    curr_aen.members.locale)) {
701 			/*
702 			 * Previously issued event registration includes
703 			 * current request. Nothing to do.
704 			 */
705 			return 0;
706 		} else {
707 			curr_aen.members.locale |= prev_aen.members.locale;
708 
709 			if (prev_aen.members.class < curr_aen.members.class)
710 				curr_aen.members.class = prev_aen.members.class;
711 
712 			sc->aen_cmd->abort_aen = 1;
713 			ret_val = mrsas_issue_blocked_abort_cmd(sc,
714 			    sc->aen_cmd);
715 
716 			if (ret_val) {
717 				printf("mrsas: Failed to abort previous AEN command\n");
718 				return ret_val;
719 			} else
720 				sc->aen_cmd = NULL;
721 		}
722 	}
723 	cmd = mrsas_get_mfi_cmd(sc);
724 	if (!cmd)
725 		return ENOMEM;
726 
727 	dcmd = &cmd->frame->dcmd;
728 
729 	memset(sc->evt_detail_mem, 0, sizeof(struct mrsas_evt_detail));
730 
731 	/*
732 	 * Prepare DCMD for aen registration
733 	 */
734 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
735 
736 	dcmd->cmd = MFI_CMD_DCMD;
737 	dcmd->cmd_status = 0x0;
738 	dcmd->sge_count = 1;
739 	dcmd->flags = MFI_FRAME_DIR_READ;
740 	dcmd->timeout = 0;
741 	dcmd->pad_0 = 0;
742 	dcmd->data_xfer_len = sizeof(struct mrsas_evt_detail);
743 	dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
744 	dcmd->mbox.w[0] = seq_num;
745 	sc->last_seq_num = seq_num;
746 	dcmd->mbox.w[1] = curr_aen.word;
747 	dcmd->sgl.sge32[0].phys_addr = (u_int32_t)sc->evt_detail_phys_addr;
748 	dcmd->sgl.sge32[0].length = sizeof(struct mrsas_evt_detail);
749 
750 	if (sc->aen_cmd != NULL) {
751 		mrsas_release_mfi_cmd(cmd);
752 		return 0;
753 	}
754 	/*
755 	 * Store reference to the cmd used to register for AEN. When an
756 	 * application wants us to register for AEN, we have to abort this
757 	 * cmd and re-register with a new EVENT LOCALE supplied by that app
758 	 */
759 	sc->aen_cmd = cmd;
760 
761 	/*
762 	 * Issue the aen registration frame
763 	 */
764 	if (mrsas_issue_dcmd(sc, cmd)) {
765 		device_printf(sc->mrsas_dev, "Cannot issue AEN DCMD command.\n");
766 		return (1);
767 	}
768 	return 0;
769 }
770 
771 /*
772  * mrsas_start_aen:	Subscribes to AEN during driver load time
773  * @instance:		Adapter soft state
774  */
775 static int
776 mrsas_start_aen(struct mrsas_softc *sc)
777 {
778 	struct mrsas_evt_log_info eli;
779 	union mrsas_evt_class_locale class_locale;
780 
781 
782 	/* Get the latest sequence number from FW */
783 
784 	memset(&eli, 0, sizeof(eli));
785 
786 	if (mrsas_get_seq_num(sc, &eli))
787 		return -1;
788 
789 	/* Register AEN with FW for latest sequence number plus 1 */
790 	class_locale.members.reserved = 0;
791 	class_locale.members.locale = MR_EVT_LOCALE_ALL;
792 	class_locale.members.class = MR_EVT_CLASS_DEBUG;
793 
794 	return mrsas_register_aen(sc, eli.newest_seq_num + 1,
795 	    class_locale.word);
796 
797 }
798 
799 /*
800  * mrsas_setup_msix:	Allocate MSI-x vectors
801  * @sc:					adapter soft state
802  */
803 static int
804 mrsas_setup_msix(struct mrsas_softc *sc)
805 {
806 	int i;
807 
808 	for (i = 0; i < sc->msix_vectors; i++) {
809 		sc->irq_context[i].sc = sc;
810 		sc->irq_context[i].MSIxIndex = i;
811 		sc->irq_id[i] = i + 1;
812 		sc->mrsas_irq[i] = bus_alloc_resource_any
813 		    (sc->mrsas_dev, SYS_RES_IRQ, &sc->irq_id[i]
814 		    ,RF_ACTIVE);
815 		if (sc->mrsas_irq[i] == NULL) {
816 			device_printf(sc->mrsas_dev, "Can't allocate MSI-x\n");
817 			goto irq_alloc_failed;
818 		}
819 		if (bus_setup_intr(sc->mrsas_dev,
820 		    sc->mrsas_irq[i],
821 		    INTR_MPSAFE | INTR_TYPE_CAM,
822 		    NULL, mrsas_isr, &sc->irq_context[i],
823 		    &sc->intr_handle[i])) {
824 			device_printf(sc->mrsas_dev,
825 			    "Cannot set up MSI-x interrupt handler\n");
826 			goto irq_alloc_failed;
827 		}
828 	}
829 	return SUCCESS;
830 
831 irq_alloc_failed:
832 	mrsas_teardown_intr(sc);
833 	return (FAIL);
834 }
835 
836 /*
837  * mrsas_allocate_msix:		Setup MSI-x vectors
838  * @sc:						adapter soft state
839  */
840 static int
841 mrsas_allocate_msix(struct mrsas_softc *sc)
842 {
843 	if (pci_alloc_msix(sc->mrsas_dev, &sc->msix_vectors) == 0) {
844 		device_printf(sc->mrsas_dev, "Using MSI-X with %d number"
845 		    " of vectors\n", sc->msix_vectors);
846 	} else {
847 		device_printf(sc->mrsas_dev, "MSI-x setup failed\n");
848 		goto irq_alloc_failed;
849 	}
850 	return SUCCESS;
851 
852 irq_alloc_failed:
853 	mrsas_teardown_intr(sc);
854 	return (FAIL);
855 }
856 
857 /*
858  * mrsas_attach:	PCI entry point
859  * input:			pointer to device struct
860  *
861  * Performs setup of PCI and registers, initializes mutexes and linked lists,
862  * registers interrupts and CAM, and initializes   the adapter/controller to
863  * its proper state.
864  */
865 static int
866 mrsas_attach(device_t dev)
867 {
868 	struct mrsas_softc *sc = device_get_softc(dev);
869 	uint32_t cmd, error;
870 
871 	memset(sc, 0, sizeof(struct mrsas_softc));
872 
873 	/* Look up our softc and initialize its fields. */
874 	sc->mrsas_dev = dev;
875 	sc->device_id = pci_get_device(dev);
876 
877 	switch (sc->device_id) {
878 	case MRSAS_INVADER:
879 	case MRSAS_FURY:
880 	case MRSAS_INTRUDER:
881 	case MRSAS_INTRUDER_24:
882 	case MRSAS_CUTLASS_52:
883 	case MRSAS_CUTLASS_53:
884 		sc->mrsas_gen3_ctrl = 1;
885 		break;
886 	case MRSAS_VENTURA:
887 	case MRSAS_CRUSADER:
888 	case MRSAS_HARPOON:
889 	case MRSAS_TOMCAT:
890 	case MRSAS_VENTURA_4PORT:
891 	case MRSAS_CRUSADER_4PORT:
892 		sc->is_ventura = true;
893 		break;
894 	case MRSAS_AERO_10E1:
895 	case MRSAS_AERO_10E5:
896 		device_printf(dev, "Adapter is in configurable secure mode\n");
897 	case MRSAS_AERO_10E2:
898 	case MRSAS_AERO_10E6:
899 		sc->is_aero = true;
900 		break;
901 	case MRSAS_AERO_10E0:
902 	case MRSAS_AERO_10E3:
903 	case MRSAS_AERO_10E4:
904 	case MRSAS_AERO_10E7:
905 		device_printf(dev, "Adapter is in non-secure mode\n");
906 		return SUCCESS;
907 
908 	}
909 
910 	mrsas_get_tunables(sc);
911 
912 	/*
913 	 * Set up PCI and registers
914 	 */
915 	cmd = pci_read_config(dev, PCIR_COMMAND, 2);
916 	if ((cmd & PCIM_CMD_PORTEN) == 0) {
917 		return (ENXIO);
918 	}
919 	/* Force the busmaster enable bit on. */
920 	cmd |= PCIM_CMD_BUSMASTEREN;
921 	pci_write_config(dev, PCIR_COMMAND, cmd, 2);
922 
923 	/* For Ventura/Aero system registers are mapped to BAR0 */
924 	if (sc->is_ventura || sc->is_aero)
925 		sc->reg_res_id = PCIR_BAR(0);	/* BAR0 offset */
926 	else
927 		sc->reg_res_id = PCIR_BAR(1);	/* BAR1 offset */
928 
929 	if ((sc->reg_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
930 	    &(sc->reg_res_id), RF_ACTIVE))
931 	    == NULL) {
932 		device_printf(dev, "Cannot allocate PCI registers\n");
933 		goto attach_fail;
934 	}
935 	sc->bus_tag = rman_get_bustag(sc->reg_res);
936 	sc->bus_handle = rman_get_bushandle(sc->reg_res);
937 
938 	/* Intialize mutexes */
939 	mtx_init(&sc->sim_lock, "mrsas_sim_lock", NULL, MTX_DEF);
940 	mtx_init(&sc->pci_lock, "mrsas_pci_lock", NULL, MTX_DEF);
941 	mtx_init(&sc->io_lock, "mrsas_io_lock", NULL, MTX_DEF);
942 	mtx_init(&sc->aen_lock, "mrsas_aen_lock", NULL, MTX_DEF);
943 	mtx_init(&sc->ioctl_lock, "mrsas_ioctl_lock", NULL, MTX_SPIN);
944 	mtx_init(&sc->mpt_cmd_pool_lock, "mrsas_mpt_cmd_pool_lock", NULL, MTX_DEF);
945 	mtx_init(&sc->mfi_cmd_pool_lock, "mrsas_mfi_cmd_pool_lock", NULL, MTX_DEF);
946 	mtx_init(&sc->raidmap_lock, "mrsas_raidmap_lock", NULL, MTX_DEF);
947 	mtx_init(&sc->stream_lock, "mrsas_stream_lock", NULL, MTX_DEF);
948 
949 	/* Intialize linked list */
950 	TAILQ_INIT(&sc->mrsas_mpt_cmd_list_head);
951 	TAILQ_INIT(&sc->mrsas_mfi_cmd_list_head);
952 
953 	mrsas_atomic_set(&sc->fw_outstanding, 0);
954 	mrsas_atomic_set(&sc->target_reset_outstanding, 0);
955 	mrsas_atomic_set(&sc->prp_count, 0);
956 	mrsas_atomic_set(&sc->sge_holes, 0);
957 
958 	sc->io_cmds_highwater = 0;
959 
960 	sc->adprecovery = MRSAS_HBA_OPERATIONAL;
961 	sc->UnevenSpanSupport = 0;
962 
963 	sc->msix_enable = 0;
964 
965 	/* Initialize Firmware */
966 	if (mrsas_init_fw(sc) != SUCCESS) {
967 		goto attach_fail_fw;
968 	}
969 	/* Register mrsas to CAM layer */
970 	if ((mrsas_cam_attach(sc) != SUCCESS)) {
971 		goto attach_fail_cam;
972 	}
973 	/* Register IRQs */
974 	if (mrsas_setup_irq(sc) != SUCCESS) {
975 		goto attach_fail_irq;
976 	}
977 	error = mrsas_kproc_create(mrsas_ocr_thread, sc,
978 	    &sc->ocr_thread, 0, 0, "mrsas_ocr%d",
979 	    device_get_unit(sc->mrsas_dev));
980 	if (error) {
981 		device_printf(sc->mrsas_dev, "Error %d starting OCR thread\n", error);
982 		goto attach_fail_ocr_thread;
983 	}
984 	/*
985 	 * After FW initialization and OCR thread creation
986 	 * we will defer the cdev creation, AEN setup on ICH callback
987 	 */
988 	sc->mrsas_ich.ich_func = mrsas_ich_startup;
989 	sc->mrsas_ich.ich_arg = sc;
990 	if (config_intrhook_establish(&sc->mrsas_ich) != 0) {
991 		device_printf(sc->mrsas_dev, "Config hook is already established\n");
992 	}
993 	mrsas_setup_sysctl(sc);
994 	return SUCCESS;
995 
996 attach_fail_ocr_thread:
997 	if (sc->ocr_thread_active)
998 		wakeup(&sc->ocr_chan);
999 attach_fail_irq:
1000 	mrsas_teardown_intr(sc);
1001 attach_fail_cam:
1002 	mrsas_cam_detach(sc);
1003 attach_fail_fw:
1004 	/* if MSIX vector is allocated and FW Init FAILED then release MSIX */
1005 	if (sc->msix_enable == 1)
1006 		pci_release_msi(sc->mrsas_dev);
1007 	mrsas_free_mem(sc);
1008 	mtx_destroy(&sc->sim_lock);
1009 	mtx_destroy(&sc->aen_lock);
1010 	mtx_destroy(&sc->pci_lock);
1011 	mtx_destroy(&sc->io_lock);
1012 	mtx_destroy(&sc->ioctl_lock);
1013 	mtx_destroy(&sc->mpt_cmd_pool_lock);
1014 	mtx_destroy(&sc->mfi_cmd_pool_lock);
1015 	mtx_destroy(&sc->raidmap_lock);
1016 	mtx_destroy(&sc->stream_lock);
1017 attach_fail:
1018 	if (sc->reg_res) {
1019 		bus_release_resource(sc->mrsas_dev, SYS_RES_MEMORY,
1020 		    sc->reg_res_id, sc->reg_res);
1021 	}
1022 	return (ENXIO);
1023 }
1024 
1025 /*
1026  * Interrupt config hook
1027  */
1028 static void
1029 mrsas_ich_startup(void *arg)
1030 {
1031 	int i = 0;
1032 	struct mrsas_softc *sc = (struct mrsas_softc *)arg;
1033 
1034 	/*
1035 	 * Intialize a counting Semaphore to take care no. of concurrent IOCTLs
1036 	 */
1037 	sema_init(&sc->ioctl_count_sema, MRSAS_MAX_IOCTL_CMDS,
1038 	    IOCTL_SEMA_DESCRIPTION);
1039 
1040 	/* Create a /dev entry for mrsas controller. */
1041 	sc->mrsas_cdev = make_dev(&mrsas_cdevsw, device_get_unit(sc->mrsas_dev), UID_ROOT,
1042 	    GID_OPERATOR, (S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP), "mrsas%u",
1043 	    device_get_unit(sc->mrsas_dev));
1044 
1045 	if (device_get_unit(sc->mrsas_dev) == 0) {
1046 		make_dev_alias_p(MAKEDEV_CHECKNAME,
1047 		    &sc->mrsas_linux_emulator_cdev, sc->mrsas_cdev,
1048 		    "megaraid_sas_ioctl_node");
1049 	}
1050 	if (sc->mrsas_cdev)
1051 		sc->mrsas_cdev->si_drv1 = sc;
1052 
1053 	/*
1054 	 * Add this controller to mrsas_mgmt_info structure so that it can be
1055 	 * exported to management applications
1056 	 */
1057 	if (device_get_unit(sc->mrsas_dev) == 0)
1058 		memset(&mrsas_mgmt_info, 0, sizeof(mrsas_mgmt_info));
1059 
1060 	mrsas_mgmt_info.count++;
1061 	mrsas_mgmt_info.sc_ptr[mrsas_mgmt_info.max_index] = sc;
1062 	mrsas_mgmt_info.max_index++;
1063 
1064 	/* Enable Interrupts */
1065 	mrsas_enable_intr(sc);
1066 
1067 	/* Call DCMD get_pd_info for all system PDs */
1068 	for (i = 0; i < MRSAS_MAX_PD; i++) {
1069 		if ((sc->target_list[i].target_id != 0xffff) &&
1070 			sc->pd_info_mem)
1071 			mrsas_get_pd_info(sc, sc->target_list[i].target_id);
1072 	}
1073 
1074 	/* Initiate AEN (Asynchronous Event Notification) */
1075 	if (mrsas_start_aen(sc)) {
1076 		device_printf(sc->mrsas_dev, "Error: AEN registration FAILED !!! "
1077 		    "Further events from the controller will not be communicated.\n"
1078 		    "Either there is some problem in the controller"
1079 		    "or the controller does not support AEN.\n"
1080 		    "Please contact to the SUPPORT TEAM if the problem persists\n");
1081 	}
1082 	if (sc->mrsas_ich.ich_arg != NULL) {
1083 		device_printf(sc->mrsas_dev, "Disestablish mrsas intr hook\n");
1084 		config_intrhook_disestablish(&sc->mrsas_ich);
1085 		sc->mrsas_ich.ich_arg = NULL;
1086 	}
1087 }
1088 
1089 /*
1090  * mrsas_detach:	De-allocates and teardown resources
1091  * input:			pointer to device struct
1092  *
1093  * This function is the entry point for device disconnect and detach.
1094  * It performs memory de-allocations, shutdown of the controller and various
1095  * teardown and destroy resource functions.
1096  */
1097 static int
1098 mrsas_detach(device_t dev)
1099 {
1100 	struct mrsas_softc *sc;
1101 	int i = 0;
1102 
1103 	sc = device_get_softc(dev);
1104 	sc->remove_in_progress = 1;
1105 
1106 	/* Destroy the character device so no other IOCTL will be handled */
1107 	if ((device_get_unit(dev) == 0) && sc->mrsas_linux_emulator_cdev)
1108 		destroy_dev(sc->mrsas_linux_emulator_cdev);
1109 	destroy_dev(sc->mrsas_cdev);
1110 
1111 	/*
1112 	 * Take the instance off the instance array. Note that we will not
1113 	 * decrement the max_index. We let this array be sparse array
1114 	 */
1115 	for (i = 0; i < mrsas_mgmt_info.max_index; i++) {
1116 		if (mrsas_mgmt_info.sc_ptr[i] == sc) {
1117 			mrsas_mgmt_info.count--;
1118 			mrsas_mgmt_info.sc_ptr[i] = NULL;
1119 			break;
1120 		}
1121 	}
1122 
1123 	if (sc->ocr_thread_active)
1124 		wakeup(&sc->ocr_chan);
1125 	while (sc->reset_in_progress) {
1126 		i++;
1127 		if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) {
1128 			mrsas_dprint(sc, MRSAS_INFO,
1129 			    "[%2d]waiting for OCR to be finished from %s\n", i, __func__);
1130 		}
1131 		pause("mr_shutdown", hz);
1132 	}
1133 	i = 0;
1134 	while (sc->ocr_thread_active) {
1135 		i++;
1136 		if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) {
1137 			mrsas_dprint(sc, MRSAS_INFO,
1138 			    "[%2d]waiting for "
1139 			    "mrsas_ocr thread to quit ocr %d\n", i,
1140 			    sc->ocr_thread_active);
1141 		}
1142 		pause("mr_shutdown", hz);
1143 	}
1144 	mrsas_flush_cache(sc);
1145 	mrsas_shutdown_ctlr(sc, MR_DCMD_CTRL_SHUTDOWN);
1146 	mrsas_disable_intr(sc);
1147 
1148 	if ((sc->is_ventura || sc->is_aero) && sc->streamDetectByLD) {
1149 		for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i)
1150 			free(sc->streamDetectByLD[i], M_MRSAS);
1151 		free(sc->streamDetectByLD, M_MRSAS);
1152 		sc->streamDetectByLD = NULL;
1153 	}
1154 
1155 	mrsas_cam_detach(sc);
1156 	mrsas_teardown_intr(sc);
1157 	mrsas_free_mem(sc);
1158 	mtx_destroy(&sc->sim_lock);
1159 	mtx_destroy(&sc->aen_lock);
1160 	mtx_destroy(&sc->pci_lock);
1161 	mtx_destroy(&sc->io_lock);
1162 	mtx_destroy(&sc->ioctl_lock);
1163 	mtx_destroy(&sc->mpt_cmd_pool_lock);
1164 	mtx_destroy(&sc->mfi_cmd_pool_lock);
1165 	mtx_destroy(&sc->raidmap_lock);
1166 	mtx_destroy(&sc->stream_lock);
1167 
1168 	/* Wait for all the semaphores to be released */
1169 	while (sema_value(&sc->ioctl_count_sema) != MRSAS_MAX_IOCTL_CMDS)
1170 		pause("mr_shutdown", hz);
1171 
1172 	/* Destroy the counting semaphore created for Ioctl */
1173 	sema_destroy(&sc->ioctl_count_sema);
1174 
1175 	if (sc->reg_res) {
1176 		bus_release_resource(sc->mrsas_dev,
1177 		    SYS_RES_MEMORY, sc->reg_res_id, sc->reg_res);
1178 	}
1179 	if (sc->sysctl_tree != NULL)
1180 		sysctl_ctx_free(&sc->sysctl_ctx);
1181 
1182 	return (0);
1183 }
1184 
1185 static int
1186 mrsas_shutdown(device_t dev)
1187 {
1188 	struct mrsas_softc *sc;
1189 	int i;
1190 
1191 	sc = device_get_softc(dev);
1192 	sc->remove_in_progress = 1;
1193 	if (panicstr == NULL) {
1194 		if (sc->ocr_thread_active)
1195 			wakeup(&sc->ocr_chan);
1196 		i = 0;
1197 		while (sc->reset_in_progress && i < 15) {
1198 			i++;
1199 			if ((i % MRSAS_RESET_NOTICE_INTERVAL) == 0) {
1200 				mrsas_dprint(sc, MRSAS_INFO,
1201 				    "[%2d]waiting for OCR to be finished "
1202 				    "from %s\n", i, __func__);
1203 			}
1204 			pause("mr_shutdown", hz);
1205 		}
1206 		if (sc->reset_in_progress) {
1207 			mrsas_dprint(sc, MRSAS_INFO,
1208 			    "gave up waiting for OCR to be finished\n");
1209 		}
1210 	}
1211 
1212 	mrsas_flush_cache(sc);
1213 	mrsas_shutdown_ctlr(sc, MR_DCMD_CTRL_SHUTDOWN);
1214 	mrsas_disable_intr(sc);
1215 	return (0);
1216 }
1217 
1218 /*
1219  * mrsas_free_mem:		Frees allocated memory
1220  * input:				Adapter instance soft state
1221  *
1222  * This function is called from mrsas_detach() to free previously allocated
1223  * memory.
1224  */
1225 void
1226 mrsas_free_mem(struct mrsas_softc *sc)
1227 {
1228 	int i;
1229 	u_int32_t max_fw_cmds;
1230 	struct mrsas_mfi_cmd *mfi_cmd;
1231 	struct mrsas_mpt_cmd *mpt_cmd;
1232 
1233 	/*
1234 	 * Free RAID map memory
1235 	 */
1236 	for (i = 0; i < 2; i++) {
1237 		if (sc->raidmap_phys_addr[i])
1238 			bus_dmamap_unload(sc->raidmap_tag[i], sc->raidmap_dmamap[i]);
1239 		if (sc->raidmap_mem[i] != NULL)
1240 			bus_dmamem_free(sc->raidmap_tag[i], sc->raidmap_mem[i], sc->raidmap_dmamap[i]);
1241 		if (sc->raidmap_tag[i] != NULL)
1242 			bus_dma_tag_destroy(sc->raidmap_tag[i]);
1243 
1244 		if (sc->ld_drv_map[i] != NULL)
1245 			free(sc->ld_drv_map[i], M_MRSAS);
1246 	}
1247 	for (i = 0; i < 2; i++) {
1248 		if (sc->jbodmap_phys_addr[i])
1249 			bus_dmamap_unload(sc->jbodmap_tag[i], sc->jbodmap_dmamap[i]);
1250 		if (sc->jbodmap_mem[i] != NULL)
1251 			bus_dmamem_free(sc->jbodmap_tag[i], sc->jbodmap_mem[i], sc->jbodmap_dmamap[i]);
1252 		if (sc->jbodmap_tag[i] != NULL)
1253 			bus_dma_tag_destroy(sc->jbodmap_tag[i]);
1254 	}
1255 	/*
1256 	 * Free version buffer memory
1257 	 */
1258 	if (sc->verbuf_phys_addr)
1259 		bus_dmamap_unload(sc->verbuf_tag, sc->verbuf_dmamap);
1260 	if (sc->verbuf_mem != NULL)
1261 		bus_dmamem_free(sc->verbuf_tag, sc->verbuf_mem, sc->verbuf_dmamap);
1262 	if (sc->verbuf_tag != NULL)
1263 		bus_dma_tag_destroy(sc->verbuf_tag);
1264 
1265 
1266 	/*
1267 	 * Free sense buffer memory
1268 	 */
1269 	if (sc->sense_phys_addr)
1270 		bus_dmamap_unload(sc->sense_tag, sc->sense_dmamap);
1271 	if (sc->sense_mem != NULL)
1272 		bus_dmamem_free(sc->sense_tag, sc->sense_mem, sc->sense_dmamap);
1273 	if (sc->sense_tag != NULL)
1274 		bus_dma_tag_destroy(sc->sense_tag);
1275 
1276 	/*
1277 	 * Free chain frame memory
1278 	 */
1279 	if (sc->chain_frame_phys_addr)
1280 		bus_dmamap_unload(sc->chain_frame_tag, sc->chain_frame_dmamap);
1281 	if (sc->chain_frame_mem != NULL)
1282 		bus_dmamem_free(sc->chain_frame_tag, sc->chain_frame_mem, sc->chain_frame_dmamap);
1283 	if (sc->chain_frame_tag != NULL)
1284 		bus_dma_tag_destroy(sc->chain_frame_tag);
1285 
1286 	/*
1287 	 * Free IO Request memory
1288 	 */
1289 	if (sc->io_request_phys_addr)
1290 		bus_dmamap_unload(sc->io_request_tag, sc->io_request_dmamap);
1291 	if (sc->io_request_mem != NULL)
1292 		bus_dmamem_free(sc->io_request_tag, sc->io_request_mem, sc->io_request_dmamap);
1293 	if (sc->io_request_tag != NULL)
1294 		bus_dma_tag_destroy(sc->io_request_tag);
1295 
1296 	/*
1297 	 * Free Reply Descriptor memory
1298 	 */
1299 	if (sc->reply_desc_phys_addr)
1300 		bus_dmamap_unload(sc->reply_desc_tag, sc->reply_desc_dmamap);
1301 	if (sc->reply_desc_mem != NULL)
1302 		bus_dmamem_free(sc->reply_desc_tag, sc->reply_desc_mem, sc->reply_desc_dmamap);
1303 	if (sc->reply_desc_tag != NULL)
1304 		bus_dma_tag_destroy(sc->reply_desc_tag);
1305 
1306 	/*
1307 	 * Free event detail memory
1308 	 */
1309 	if (sc->evt_detail_phys_addr)
1310 		bus_dmamap_unload(sc->evt_detail_tag, sc->evt_detail_dmamap);
1311 	if (sc->evt_detail_mem != NULL)
1312 		bus_dmamem_free(sc->evt_detail_tag, sc->evt_detail_mem, sc->evt_detail_dmamap);
1313 	if (sc->evt_detail_tag != NULL)
1314 		bus_dma_tag_destroy(sc->evt_detail_tag);
1315 
1316 	/*
1317 	 * Free PD info memory
1318 	 */
1319 	if (sc->pd_info_phys_addr)
1320 		bus_dmamap_unload(sc->pd_info_tag, sc->pd_info_dmamap);
1321 	if (sc->pd_info_mem != NULL)
1322 		bus_dmamem_free(sc->pd_info_tag, sc->pd_info_mem, sc->pd_info_dmamap);
1323 	if (sc->pd_info_tag != NULL)
1324 		bus_dma_tag_destroy(sc->pd_info_tag);
1325 
1326 	/*
1327 	 * Free MFI frames
1328 	 */
1329 	if (sc->mfi_cmd_list) {
1330 		for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) {
1331 			mfi_cmd = sc->mfi_cmd_list[i];
1332 			mrsas_free_frame(sc, mfi_cmd);
1333 		}
1334 	}
1335 	if (sc->mficmd_frame_tag != NULL)
1336 		bus_dma_tag_destroy(sc->mficmd_frame_tag);
1337 
1338 	/*
1339 	 * Free MPT internal command list
1340 	 */
1341 	max_fw_cmds = sc->max_fw_cmds;
1342 	if (sc->mpt_cmd_list) {
1343 		for (i = 0; i < max_fw_cmds; i++) {
1344 			mpt_cmd = sc->mpt_cmd_list[i];
1345 			bus_dmamap_destroy(sc->data_tag, mpt_cmd->data_dmamap);
1346 			free(sc->mpt_cmd_list[i], M_MRSAS);
1347 		}
1348 		free(sc->mpt_cmd_list, M_MRSAS);
1349 		sc->mpt_cmd_list = NULL;
1350 	}
1351 	/*
1352 	 * Free MFI internal command list
1353 	 */
1354 
1355 	if (sc->mfi_cmd_list) {
1356 		for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) {
1357 			free(sc->mfi_cmd_list[i], M_MRSAS);
1358 		}
1359 		free(sc->mfi_cmd_list, M_MRSAS);
1360 		sc->mfi_cmd_list = NULL;
1361 	}
1362 	/*
1363 	 * Free request descriptor memory
1364 	 */
1365 	free(sc->req_desc, M_MRSAS);
1366 	sc->req_desc = NULL;
1367 
1368 	/*
1369 	 * Destroy parent tag
1370 	 */
1371 	if (sc->mrsas_parent_tag != NULL)
1372 		bus_dma_tag_destroy(sc->mrsas_parent_tag);
1373 
1374 	/*
1375 	 * Free ctrl_info memory
1376 	 */
1377 	if (sc->ctrl_info != NULL)
1378 		free(sc->ctrl_info, M_MRSAS);
1379 }
1380 
1381 /*
1382  * mrsas_teardown_intr:	Teardown interrupt
1383  * input:				Adapter instance soft state
1384  *
1385  * This function is called from mrsas_detach() to teardown and release bus
1386  * interrupt resourse.
1387  */
1388 void
1389 mrsas_teardown_intr(struct mrsas_softc *sc)
1390 {
1391 	int i;
1392 
1393 	if (!sc->msix_enable) {
1394 		if (sc->intr_handle[0])
1395 			bus_teardown_intr(sc->mrsas_dev, sc->mrsas_irq[0], sc->intr_handle[0]);
1396 		if (sc->mrsas_irq[0] != NULL)
1397 			bus_release_resource(sc->mrsas_dev, SYS_RES_IRQ,
1398 			    sc->irq_id[0], sc->mrsas_irq[0]);
1399 		sc->intr_handle[0] = NULL;
1400 	} else {
1401 		for (i = 0; i < sc->msix_vectors; i++) {
1402 			if (sc->intr_handle[i])
1403 				bus_teardown_intr(sc->mrsas_dev, sc->mrsas_irq[i],
1404 				    sc->intr_handle[i]);
1405 
1406 			if (sc->mrsas_irq[i] != NULL)
1407 				bus_release_resource(sc->mrsas_dev, SYS_RES_IRQ,
1408 				    sc->irq_id[i], sc->mrsas_irq[i]);
1409 
1410 			sc->intr_handle[i] = NULL;
1411 		}
1412 		pci_release_msi(sc->mrsas_dev);
1413 	}
1414 
1415 }
1416 
1417 /*
1418  * mrsas_suspend:	Suspend entry point
1419  * input:			Device struct pointer
1420  *
1421  * This function is the entry point for system suspend from the OS.
1422  */
1423 static int
1424 mrsas_suspend(device_t dev)
1425 {
1426 	/* This will be filled when the driver will have hibernation support */
1427 	return (0);
1428 }
1429 
1430 /*
1431  * mrsas_resume:	Resume entry point
1432  * input:			Device struct pointer
1433  *
1434  * This function is the entry point for system resume from the OS.
1435  */
1436 static int
1437 mrsas_resume(device_t dev)
1438 {
1439 	/* This will be filled when the driver will have hibernation support */
1440 	return (0);
1441 }
1442 
1443 /**
1444  * mrsas_get_softc_instance:    Find softc instance based on cmd type
1445  *
1446  * This function will return softc instance based on cmd type.
1447  * In some case, application fire ioctl on required management instance and
1448  * do not provide host_no. Use cdev->si_drv1 to get softc instance for those
1449  * case, else get the softc instance from host_no provided by application in
1450  * user data.
1451  */
1452 
1453 static struct mrsas_softc *
1454 mrsas_get_softc_instance(struct cdev *dev, u_long cmd, caddr_t arg)
1455 {
1456 	struct mrsas_softc *sc = NULL;
1457 	struct mrsas_iocpacket *user_ioc = (struct mrsas_iocpacket *)arg;
1458 
1459 	if (cmd == MRSAS_IOC_GET_PCI_INFO) {
1460 		sc = dev->si_drv1;
1461 	} else {
1462 		/*
1463 		 * get the Host number & the softc from data sent by the
1464 		 * Application
1465 		 */
1466 		sc = mrsas_mgmt_info.sc_ptr[user_ioc->host_no];
1467 		if (sc == NULL)
1468 			printf("There is no Controller number %d\n",
1469 			    user_ioc->host_no);
1470 		else if (user_ioc->host_no >= mrsas_mgmt_info.max_index)
1471 			mrsas_dprint(sc, MRSAS_FAULT,
1472 			    "Invalid Controller number %d\n", user_ioc->host_no);
1473 	}
1474 
1475 	return sc;
1476 }
1477 
1478 /*
1479  * mrsas_ioctl:	IOCtl commands entry point.
1480  *
1481  * This function is the entry point for IOCtls from the OS.  It calls the
1482  * appropriate function for processing depending on the command received.
1483  */
1484 static int
1485 mrsas_ioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag,
1486     struct thread *td)
1487 {
1488 	struct mrsas_softc *sc;
1489 	int ret = 0, i = 0;
1490 	MRSAS_DRV_PCI_INFORMATION *pciDrvInfo;
1491 
1492 	sc = mrsas_get_softc_instance(dev, cmd, arg);
1493 	if (!sc)
1494 		return ENOENT;
1495 
1496 	if (sc->remove_in_progress ||
1497 		(sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)) {
1498 		mrsas_dprint(sc, MRSAS_INFO,
1499 		    "Either driver remove or shutdown called or "
1500 			"HW is in unrecoverable critical error state.\n");
1501 		return ENOENT;
1502 	}
1503 	mtx_lock_spin(&sc->ioctl_lock);
1504 	if (!sc->reset_in_progress) {
1505 		mtx_unlock_spin(&sc->ioctl_lock);
1506 		goto do_ioctl;
1507 	}
1508 	mtx_unlock_spin(&sc->ioctl_lock);
1509 	while (sc->reset_in_progress) {
1510 		i++;
1511 		if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) {
1512 			mrsas_dprint(sc, MRSAS_INFO,
1513 			    "[%2d]waiting for OCR to be finished from %s\n", i, __func__);
1514 		}
1515 		pause("mr_ioctl", hz);
1516 	}
1517 
1518 do_ioctl:
1519 	switch (cmd) {
1520 	case MRSAS_IOC_FIRMWARE_PASS_THROUGH64:
1521 #ifdef COMPAT_FREEBSD32
1522 	case MRSAS_IOC_FIRMWARE_PASS_THROUGH32:
1523 #endif
1524 		/*
1525 		 * Decrement the Ioctl counting Semaphore before getting an
1526 		 * mfi command
1527 		 */
1528 		sema_wait(&sc->ioctl_count_sema);
1529 
1530 		ret = mrsas_passthru(sc, (void *)arg, cmd);
1531 
1532 		/* Increment the Ioctl counting semaphore value */
1533 		sema_post(&sc->ioctl_count_sema);
1534 
1535 		break;
1536 	case MRSAS_IOC_SCAN_BUS:
1537 		ret = mrsas_bus_scan(sc);
1538 		break;
1539 
1540 	case MRSAS_IOC_GET_PCI_INFO:
1541 		pciDrvInfo = (MRSAS_DRV_PCI_INFORMATION *) arg;
1542 		memset(pciDrvInfo, 0, sizeof(MRSAS_DRV_PCI_INFORMATION));
1543 		pciDrvInfo->busNumber = pci_get_bus(sc->mrsas_dev);
1544 		pciDrvInfo->deviceNumber = pci_get_slot(sc->mrsas_dev);
1545 		pciDrvInfo->functionNumber = pci_get_function(sc->mrsas_dev);
1546 		pciDrvInfo->domainID = pci_get_domain(sc->mrsas_dev);
1547 		mrsas_dprint(sc, MRSAS_INFO, "pci bus no: %d,"
1548 		    "pci device no: %d, pci function no: %d,"
1549 		    "pci domain ID: %d\n",
1550 		    pciDrvInfo->busNumber, pciDrvInfo->deviceNumber,
1551 		    pciDrvInfo->functionNumber, pciDrvInfo->domainID);
1552 		ret = 0;
1553 		break;
1554 
1555 	default:
1556 		mrsas_dprint(sc, MRSAS_TRACE, "IOCTL command 0x%lx is not handled\n", cmd);
1557 		ret = ENOENT;
1558 	}
1559 
1560 	return (ret);
1561 }
1562 
1563 /*
1564  * mrsas_poll:	poll entry point for mrsas driver fd
1565  *
1566  * This function is the entry point for poll from the OS.  It waits for some AEN
1567  * events to be triggered from the controller and notifies back.
1568  */
1569 static int
1570 mrsas_poll(struct cdev *dev, int poll_events, struct thread *td)
1571 {
1572 	struct mrsas_softc *sc;
1573 	int revents = 0;
1574 
1575 	sc = dev->si_drv1;
1576 
1577 	if (poll_events & (POLLIN | POLLRDNORM)) {
1578 		if (sc->mrsas_aen_triggered) {
1579 			revents |= poll_events & (POLLIN | POLLRDNORM);
1580 		}
1581 	}
1582 	if (revents == 0) {
1583 		if (poll_events & (POLLIN | POLLRDNORM)) {
1584 			mtx_lock(&sc->aen_lock);
1585 			sc->mrsas_poll_waiting = 1;
1586 			selrecord(td, &sc->mrsas_select);
1587 			mtx_unlock(&sc->aen_lock);
1588 		}
1589 	}
1590 	return revents;
1591 }
1592 
1593 /*
1594  * mrsas_setup_irq:	Set up interrupt
1595  * input:			Adapter instance soft state
1596  *
1597  * This function sets up interrupts as a bus resource, with flags indicating
1598  * resource permitting contemporaneous sharing and for resource to activate
1599  * atomically.
1600  */
1601 static int
1602 mrsas_setup_irq(struct mrsas_softc *sc)
1603 {
1604 	if (sc->msix_enable && (mrsas_setup_msix(sc) == SUCCESS))
1605 		device_printf(sc->mrsas_dev, "MSI-x interrupts setup success\n");
1606 
1607 	else {
1608 		device_printf(sc->mrsas_dev, "Fall back to legacy interrupt\n");
1609 		sc->irq_context[0].sc = sc;
1610 		sc->irq_context[0].MSIxIndex = 0;
1611 		sc->irq_id[0] = 0;
1612 		sc->mrsas_irq[0] = bus_alloc_resource_any(sc->mrsas_dev,
1613 		    SYS_RES_IRQ, &sc->irq_id[0], RF_SHAREABLE | RF_ACTIVE);
1614 		if (sc->mrsas_irq[0] == NULL) {
1615 			device_printf(sc->mrsas_dev, "Cannot allocate legcay"
1616 			    "interrupt\n");
1617 			return (FAIL);
1618 		}
1619 		if (bus_setup_intr(sc->mrsas_dev, sc->mrsas_irq[0],
1620 		    INTR_MPSAFE | INTR_TYPE_CAM, NULL, mrsas_isr,
1621 		    &sc->irq_context[0], &sc->intr_handle[0])) {
1622 			device_printf(sc->mrsas_dev, "Cannot set up legacy"
1623 			    "interrupt\n");
1624 			return (FAIL);
1625 		}
1626 	}
1627 	return (0);
1628 }
1629 
1630 /*
1631  * mrsas_isr:	ISR entry point
1632  * input:		argument pointer
1633  *
1634  * This function is the interrupt service routine entry point.  There are two
1635  * types of interrupts, state change interrupt and response interrupt.  If an
1636  * interrupt is not ours, we just return.
1637  */
1638 void
1639 mrsas_isr(void *arg)
1640 {
1641 	struct mrsas_irq_context *irq_context = (struct mrsas_irq_context *)arg;
1642 	struct mrsas_softc *sc = irq_context->sc;
1643 	int status = 0;
1644 
1645 	if (sc->mask_interrupts)
1646 		return;
1647 
1648 	if (!sc->msix_vectors) {
1649 		status = mrsas_clear_intr(sc);
1650 		if (!status)
1651 			return;
1652 	}
1653 	/* If we are resetting, bail */
1654 	if (mrsas_test_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags)) {
1655 		printf(" Entered into ISR when OCR is going active. \n");
1656 		mrsas_clear_intr(sc);
1657 		return;
1658 	}
1659 	/* Process for reply request and clear response interrupt */
1660 	if (mrsas_complete_cmd(sc, irq_context->MSIxIndex) != SUCCESS)
1661 		mrsas_clear_intr(sc);
1662 
1663 	return;
1664 }
1665 
1666 /*
1667  * mrsas_complete_cmd:	Process reply request
1668  * input:				Adapter instance soft state
1669  *
1670  * This function is called from mrsas_isr() to process reply request and clear
1671  * response interrupt. Processing of the reply request entails walking
1672  * through the reply descriptor array for the command request  pended from
1673  * Firmware.  We look at the Function field to determine the command type and
1674  * perform the appropriate action.  Before we return, we clear the response
1675  * interrupt.
1676  */
1677 int
1678 mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex)
1679 {
1680 	Mpi2ReplyDescriptorsUnion_t *desc;
1681 	MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc;
1682 	MRSAS_RAID_SCSI_IO_REQUEST *scsi_io_req;
1683 	struct mrsas_mpt_cmd *cmd_mpt, *r1_cmd = NULL;
1684 	struct mrsas_mfi_cmd *cmd_mfi;
1685 	u_int8_t reply_descript_type, *sense;
1686 	u_int16_t smid, num_completed;
1687 	u_int8_t status, extStatus;
1688 	union desc_value desc_val;
1689 	PLD_LOAD_BALANCE_INFO lbinfo;
1690 	u_int32_t device_id, data_length;
1691 	int threshold_reply_count = 0;
1692 #if TM_DEBUG
1693 	MR_TASK_MANAGE_REQUEST *mr_tm_req;
1694 	MPI2_SCSI_TASK_MANAGE_REQUEST *mpi_tm_req;
1695 #endif
1696 
1697 	/* If we have a hardware error, not need to continue */
1698 	if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)
1699 		return (DONE);
1700 
1701 	desc = sc->reply_desc_mem;
1702 	desc += ((MSIxIndex * sc->reply_alloc_sz) / sizeof(MPI2_REPLY_DESCRIPTORS_UNION))
1703 	    + sc->last_reply_idx[MSIxIndex];
1704 
1705 	reply_desc = (MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *) desc;
1706 
1707 	desc_val.word = desc->Words;
1708 	num_completed = 0;
1709 
1710 	reply_descript_type = reply_desc->ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
1711 
1712 	/* Find our reply descriptor for the command and process */
1713 	while ((desc_val.u.low != 0xFFFFFFFF) && (desc_val.u.high != 0xFFFFFFFF)) {
1714 		smid = reply_desc->SMID;
1715 		cmd_mpt = sc->mpt_cmd_list[smid - 1];
1716 		scsi_io_req = (MRSAS_RAID_SCSI_IO_REQUEST *) cmd_mpt->io_request;
1717 
1718 		status = scsi_io_req->RaidContext.raid_context.status;
1719 		extStatus = scsi_io_req->RaidContext.raid_context.exStatus;
1720 		sense = cmd_mpt->sense;
1721 		data_length = scsi_io_req->DataLength;
1722 
1723 		switch (scsi_io_req->Function) {
1724 		case MPI2_FUNCTION_SCSI_TASK_MGMT:
1725 #if TM_DEBUG
1726 			mr_tm_req = (MR_TASK_MANAGE_REQUEST *) cmd_mpt->io_request;
1727 			mpi_tm_req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)
1728 			    &mr_tm_req->TmRequest;
1729 			device_printf(sc->mrsas_dev, "TM completion type 0x%X, "
1730 			    "TaskMID: 0x%X", mpi_tm_req->TaskType, mpi_tm_req->TaskMID);
1731 #endif
1732             wakeup_one((void *)&sc->ocr_chan);
1733             break;
1734 		case MPI2_FUNCTION_SCSI_IO_REQUEST:	/* Fast Path IO. */
1735 			device_id = cmd_mpt->ccb_ptr->ccb_h.target_id;
1736 			lbinfo = &sc->load_balance_info[device_id];
1737 			/* R1 load balancing for READ */
1738 			if (cmd_mpt->load_balance == MRSAS_LOAD_BALANCE_FLAG) {
1739 				mrsas_atomic_dec(&lbinfo->scsi_pending_cmds[cmd_mpt->pd_r1_lb]);
1740 				cmd_mpt->load_balance &= ~MRSAS_LOAD_BALANCE_FLAG;
1741 			}
1742 			/* Fall thru and complete IO */
1743 		case MRSAS_MPI2_FUNCTION_LD_IO_REQUEST:
1744 			if (cmd_mpt->r1_alt_dev_handle == MR_DEVHANDLE_INVALID) {
1745 				mrsas_map_mpt_cmd_status(cmd_mpt, cmd_mpt->ccb_ptr, status,
1746 				    extStatus, data_length, sense);
1747 				mrsas_cmd_done(sc, cmd_mpt);
1748 				mrsas_atomic_dec(&sc->fw_outstanding);
1749 			} else {
1750 				/*
1751 				 * If the peer  Raid  1/10 fast path failed,
1752 				 * mark IO as failed to the scsi layer.
1753 				 * Overwrite the current status by the failed status
1754 				 * and make sure that if any command fails,
1755 				 * driver returns fail status to CAM.
1756 				 */
1757 				cmd_mpt->cmd_completed = 1;
1758 				r1_cmd = cmd_mpt->peer_cmd;
1759 				if (r1_cmd->cmd_completed) {
1760 					if (r1_cmd->io_request->RaidContext.raid_context.status != MFI_STAT_OK) {
1761 						status = r1_cmd->io_request->RaidContext.raid_context.status;
1762 						extStatus = r1_cmd->io_request->RaidContext.raid_context.exStatus;
1763 						data_length = r1_cmd->io_request->DataLength;
1764 						sense = r1_cmd->sense;
1765 					}
1766 					r1_cmd->ccb_ptr = NULL;
1767 					if (r1_cmd->callout_owner) {
1768 						callout_stop(&r1_cmd->cm_callout);
1769 						r1_cmd->callout_owner  = false;
1770 					}
1771 					mrsas_release_mpt_cmd(r1_cmd);
1772 					mrsas_atomic_dec(&sc->fw_outstanding);
1773 					mrsas_map_mpt_cmd_status(cmd_mpt, cmd_mpt->ccb_ptr, status,
1774 					    extStatus, data_length, sense);
1775 					mrsas_cmd_done(sc, cmd_mpt);
1776 					mrsas_atomic_dec(&sc->fw_outstanding);
1777 				}
1778 			}
1779 			break;
1780 		case MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST:	/* MFI command */
1781 			cmd_mfi = sc->mfi_cmd_list[cmd_mpt->sync_cmd_idx];
1782 			/*
1783 			 * Make sure NOT TO release the mfi command from the called
1784 			 * function's context if it is fired with issue_polled call.
1785 			 * And also make sure that the issue_polled call should only be
1786 			 * used if INTERRUPT IS DISABLED.
1787 			 */
1788 			if (cmd_mfi->frame->hdr.flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE)
1789 				mrsas_release_mfi_cmd(cmd_mfi);
1790 			else
1791 				mrsas_complete_mptmfi_passthru(sc, cmd_mfi, status);
1792 			break;
1793 		}
1794 
1795 		sc->last_reply_idx[MSIxIndex]++;
1796 		if (sc->last_reply_idx[MSIxIndex] >= sc->reply_q_depth)
1797 			sc->last_reply_idx[MSIxIndex] = 0;
1798 
1799 		desc->Words = ~((uint64_t)0x00);	/* set it back to all
1800 							 * 0xFFFFFFFFs */
1801 		num_completed++;
1802 		threshold_reply_count++;
1803 
1804 		/* Get the next reply descriptor */
1805 		if (!sc->last_reply_idx[MSIxIndex]) {
1806 			desc = sc->reply_desc_mem;
1807 			desc += ((MSIxIndex * sc->reply_alloc_sz) / sizeof(MPI2_REPLY_DESCRIPTORS_UNION));
1808 		} else
1809 			desc++;
1810 
1811 		reply_desc = (MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *) desc;
1812 		desc_val.word = desc->Words;
1813 
1814 		reply_descript_type = reply_desc->ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
1815 
1816 		if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
1817 			break;
1818 
1819 		/*
1820 		 * Write to reply post index after completing threshold reply
1821 		 * count and still there are more replies in reply queue
1822 		 * pending to be completed.
1823 		 */
1824 		if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) {
1825 			if (sc->msix_enable) {
1826 				if (sc->msix_combined)
1827 					mrsas_write_reg(sc, sc->msix_reg_offset[MSIxIndex / 8],
1828 					    ((MSIxIndex & 0x7) << 24) |
1829 					    sc->last_reply_idx[MSIxIndex]);
1830 				else
1831 					mrsas_write_reg(sc, sc->msix_reg_offset[0], (MSIxIndex << 24) |
1832 					    sc->last_reply_idx[MSIxIndex]);
1833 			} else
1834 				mrsas_write_reg(sc, offsetof(mrsas_reg_set,
1835 				    reply_post_host_index), sc->last_reply_idx[0]);
1836 
1837 			threshold_reply_count = 0;
1838 		}
1839 	}
1840 
1841 	/* No match, just return */
1842 	if (num_completed == 0)
1843 		return (DONE);
1844 
1845 	/* Clear response interrupt */
1846 	if (sc->msix_enable) {
1847 		if (sc->msix_combined) {
1848 			mrsas_write_reg(sc, sc->msix_reg_offset[MSIxIndex / 8],
1849 			    ((MSIxIndex & 0x7) << 24) |
1850 			    sc->last_reply_idx[MSIxIndex]);
1851 		} else
1852 			mrsas_write_reg(sc, sc->msix_reg_offset[0], (MSIxIndex << 24) |
1853 			    sc->last_reply_idx[MSIxIndex]);
1854 	} else
1855 		mrsas_write_reg(sc, offsetof(mrsas_reg_set,
1856 		    reply_post_host_index), sc->last_reply_idx[0]);
1857 
1858 	return (0);
1859 }
1860 
1861 /*
1862  * mrsas_map_mpt_cmd_status:	Allocate DMAable memory.
1863  * input:						Adapter instance soft state
1864  *
1865  * This function is called from mrsas_complete_cmd(), for LD IO and FastPath IO.
1866  * It checks the command status and maps the appropriate CAM status for the
1867  * CCB.
1868  */
1869 void
1870 mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, union ccb *ccb_ptr, u_int8_t status,
1871     u_int8_t extStatus, u_int32_t data_length, u_int8_t *sense)
1872 {
1873 	struct mrsas_softc *sc = cmd->sc;
1874 	u_int8_t *sense_data;
1875 
1876 	switch (status) {
1877 	case MFI_STAT_OK:
1878 		ccb_ptr->ccb_h.status = CAM_REQ_CMP;
1879 		break;
1880 	case MFI_STAT_SCSI_IO_FAILED:
1881 	case MFI_STAT_SCSI_DONE_WITH_ERROR:
1882 		ccb_ptr->ccb_h.status = CAM_SCSI_STATUS_ERROR;
1883 		sense_data = (u_int8_t *)&ccb_ptr->csio.sense_data;
1884 		if (sense_data) {
1885 			/* For now just copy 18 bytes back */
1886 			memcpy(sense_data, sense, 18);
1887 			ccb_ptr->csio.sense_len = 18;
1888 			ccb_ptr->ccb_h.status |= CAM_AUTOSNS_VALID;
1889 		}
1890 		break;
1891 	case MFI_STAT_LD_OFFLINE:
1892 	case MFI_STAT_DEVICE_NOT_FOUND:
1893 		if (ccb_ptr->ccb_h.target_lun)
1894 			ccb_ptr->ccb_h.status |= CAM_LUN_INVALID;
1895 		else
1896 			ccb_ptr->ccb_h.status |= CAM_DEV_NOT_THERE;
1897 		break;
1898 	case MFI_STAT_CONFIG_SEQ_MISMATCH:
1899 		ccb_ptr->ccb_h.status |= CAM_REQUEUE_REQ;
1900 		break;
1901 	default:
1902 		device_printf(sc->mrsas_dev, "FW cmd complete status %x\n", status);
1903 		ccb_ptr->ccb_h.status = CAM_REQ_CMP_ERR;
1904 		ccb_ptr->csio.scsi_status = status;
1905 	}
1906 	return;
1907 }
1908 
1909 /*
1910  * mrsas_alloc_mem:	Allocate DMAable memory
1911  * input:			Adapter instance soft state
1912  *
1913  * This function creates the parent DMA tag and allocates DMAable memory. DMA
1914  * tag describes constraints of DMA mapping. Memory allocated is mapped into
1915  * Kernel virtual address. Callback argument is physical memory address.
1916  */
1917 static int
1918 mrsas_alloc_mem(struct mrsas_softc *sc)
1919 {
1920 	u_int32_t verbuf_size, io_req_size, reply_desc_size, sense_size, chain_frame_size,
1921 		evt_detail_size, count, pd_info_size;
1922 
1923 	/*
1924 	 * Allocate parent DMA tag
1925 	 */
1926 	if (bus_dma_tag_create(NULL,	/* parent */
1927 	    1,				/* alignment */
1928 	    0,				/* boundary */
1929 	    BUS_SPACE_MAXADDR,		/* lowaddr */
1930 	    BUS_SPACE_MAXADDR,		/* highaddr */
1931 	    NULL, NULL,			/* filter, filterarg */
1932 	    MAXPHYS,			/* maxsize */
1933 	    sc->max_num_sge,		/* nsegments */
1934 	    MAXPHYS,			/* maxsegsize */
1935 	    0,				/* flags */
1936 	    NULL, NULL,			/* lockfunc, lockarg */
1937 	    &sc->mrsas_parent_tag	/* tag */
1938 	    )) {
1939 		device_printf(sc->mrsas_dev, "Cannot allocate parent DMA tag\n");
1940 		return (ENOMEM);
1941 	}
1942 	/*
1943 	 * Allocate for version buffer
1944 	 */
1945 	verbuf_size = MRSAS_MAX_NAME_LENGTH * (sizeof(bus_addr_t));
1946 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
1947 	    1, 0,
1948 	    BUS_SPACE_MAXADDR_32BIT,
1949 	    BUS_SPACE_MAXADDR,
1950 	    NULL, NULL,
1951 	    verbuf_size,
1952 	    1,
1953 	    verbuf_size,
1954 	    BUS_DMA_ALLOCNOW,
1955 	    NULL, NULL,
1956 	    &sc->verbuf_tag)) {
1957 		device_printf(sc->mrsas_dev, "Cannot allocate verbuf DMA tag\n");
1958 		return (ENOMEM);
1959 	}
1960 	if (bus_dmamem_alloc(sc->verbuf_tag, (void **)&sc->verbuf_mem,
1961 	    BUS_DMA_NOWAIT, &sc->verbuf_dmamap)) {
1962 		device_printf(sc->mrsas_dev, "Cannot allocate verbuf memory\n");
1963 		return (ENOMEM);
1964 	}
1965 	bzero(sc->verbuf_mem, verbuf_size);
1966 	if (bus_dmamap_load(sc->verbuf_tag, sc->verbuf_dmamap, sc->verbuf_mem,
1967 	    verbuf_size, mrsas_addr_cb, &sc->verbuf_phys_addr,
1968 	    BUS_DMA_NOWAIT)) {
1969 		device_printf(sc->mrsas_dev, "Cannot load verbuf DMA map\n");
1970 		return (ENOMEM);
1971 	}
1972 	/*
1973 	 * Allocate IO Request Frames
1974 	 */
1975 	io_req_size = sc->io_frames_alloc_sz;
1976 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
1977 	    16, 0,
1978 	    BUS_SPACE_MAXADDR_32BIT,
1979 	    BUS_SPACE_MAXADDR,
1980 	    NULL, NULL,
1981 	    io_req_size,
1982 	    1,
1983 	    io_req_size,
1984 	    BUS_DMA_ALLOCNOW,
1985 	    NULL, NULL,
1986 	    &sc->io_request_tag)) {
1987 		device_printf(sc->mrsas_dev, "Cannot create IO request tag\n");
1988 		return (ENOMEM);
1989 	}
1990 	if (bus_dmamem_alloc(sc->io_request_tag, (void **)&sc->io_request_mem,
1991 	    BUS_DMA_NOWAIT, &sc->io_request_dmamap)) {
1992 		device_printf(sc->mrsas_dev, "Cannot alloc IO request memory\n");
1993 		return (ENOMEM);
1994 	}
1995 	bzero(sc->io_request_mem, io_req_size);
1996 	if (bus_dmamap_load(sc->io_request_tag, sc->io_request_dmamap,
1997 	    sc->io_request_mem, io_req_size, mrsas_addr_cb,
1998 	    &sc->io_request_phys_addr, BUS_DMA_NOWAIT)) {
1999 		device_printf(sc->mrsas_dev, "Cannot load IO request memory\n");
2000 		return (ENOMEM);
2001 	}
2002 	/*
2003 	 * Allocate Chain Frames
2004 	 */
2005 	chain_frame_size = sc->chain_frames_alloc_sz;
2006 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2007 	    4, 0,
2008 	    BUS_SPACE_MAXADDR_32BIT,
2009 	    BUS_SPACE_MAXADDR,
2010 	    NULL, NULL,
2011 	    chain_frame_size,
2012 	    1,
2013 	    chain_frame_size,
2014 	    BUS_DMA_ALLOCNOW,
2015 	    NULL, NULL,
2016 	    &sc->chain_frame_tag)) {
2017 		device_printf(sc->mrsas_dev, "Cannot create chain frame tag\n");
2018 		return (ENOMEM);
2019 	}
2020 	if (bus_dmamem_alloc(sc->chain_frame_tag, (void **)&sc->chain_frame_mem,
2021 	    BUS_DMA_NOWAIT, &sc->chain_frame_dmamap)) {
2022 		device_printf(sc->mrsas_dev, "Cannot alloc chain frame memory\n");
2023 		return (ENOMEM);
2024 	}
2025 	bzero(sc->chain_frame_mem, chain_frame_size);
2026 	if (bus_dmamap_load(sc->chain_frame_tag, sc->chain_frame_dmamap,
2027 	    sc->chain_frame_mem, chain_frame_size, mrsas_addr_cb,
2028 	    &sc->chain_frame_phys_addr, BUS_DMA_NOWAIT)) {
2029 		device_printf(sc->mrsas_dev, "Cannot load chain frame memory\n");
2030 		return (ENOMEM);
2031 	}
2032 	count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
2033 	/*
2034 	 * Allocate Reply Descriptor Array
2035 	 */
2036 	reply_desc_size = sc->reply_alloc_sz * count;
2037 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2038 	    16, 0,
2039 	    BUS_SPACE_MAXADDR_32BIT,
2040 	    BUS_SPACE_MAXADDR,
2041 	    NULL, NULL,
2042 	    reply_desc_size,
2043 	    1,
2044 	    reply_desc_size,
2045 	    BUS_DMA_ALLOCNOW,
2046 	    NULL, NULL,
2047 	    &sc->reply_desc_tag)) {
2048 		device_printf(sc->mrsas_dev, "Cannot create reply descriptor tag\n");
2049 		return (ENOMEM);
2050 	}
2051 	if (bus_dmamem_alloc(sc->reply_desc_tag, (void **)&sc->reply_desc_mem,
2052 	    BUS_DMA_NOWAIT, &sc->reply_desc_dmamap)) {
2053 		device_printf(sc->mrsas_dev, "Cannot alloc reply descriptor memory\n");
2054 		return (ENOMEM);
2055 	}
2056 	if (bus_dmamap_load(sc->reply_desc_tag, sc->reply_desc_dmamap,
2057 	    sc->reply_desc_mem, reply_desc_size, mrsas_addr_cb,
2058 	    &sc->reply_desc_phys_addr, BUS_DMA_NOWAIT)) {
2059 		device_printf(sc->mrsas_dev, "Cannot load reply descriptor memory\n");
2060 		return (ENOMEM);
2061 	}
2062 	/*
2063 	 * Allocate Sense Buffer Array.  Keep in lower 4GB
2064 	 */
2065 	sense_size = sc->max_fw_cmds * MRSAS_SENSE_LEN;
2066 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2067 	    64, 0,
2068 	    BUS_SPACE_MAXADDR_32BIT,
2069 	    BUS_SPACE_MAXADDR,
2070 	    NULL, NULL,
2071 	    sense_size,
2072 	    1,
2073 	    sense_size,
2074 	    BUS_DMA_ALLOCNOW,
2075 	    NULL, NULL,
2076 	    &sc->sense_tag)) {
2077 		device_printf(sc->mrsas_dev, "Cannot allocate sense buf tag\n");
2078 		return (ENOMEM);
2079 	}
2080 	if (bus_dmamem_alloc(sc->sense_tag, (void **)&sc->sense_mem,
2081 	    BUS_DMA_NOWAIT, &sc->sense_dmamap)) {
2082 		device_printf(sc->mrsas_dev, "Cannot allocate sense buf memory\n");
2083 		return (ENOMEM);
2084 	}
2085 	if (bus_dmamap_load(sc->sense_tag, sc->sense_dmamap,
2086 	    sc->sense_mem, sense_size, mrsas_addr_cb, &sc->sense_phys_addr,
2087 	    BUS_DMA_NOWAIT)) {
2088 		device_printf(sc->mrsas_dev, "Cannot load sense buf memory\n");
2089 		return (ENOMEM);
2090 	}
2091 
2092 	/*
2093 	 * Allocate for Event detail structure
2094 	 */
2095 	evt_detail_size = sizeof(struct mrsas_evt_detail);
2096 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2097 	    1, 0,
2098 	    BUS_SPACE_MAXADDR_32BIT,
2099 	    BUS_SPACE_MAXADDR,
2100 	    NULL, NULL,
2101 	    evt_detail_size,
2102 	    1,
2103 	    evt_detail_size,
2104 	    BUS_DMA_ALLOCNOW,
2105 	    NULL, NULL,
2106 	    &sc->evt_detail_tag)) {
2107 		device_printf(sc->mrsas_dev, "Cannot create Event detail tag\n");
2108 		return (ENOMEM);
2109 	}
2110 	if (bus_dmamem_alloc(sc->evt_detail_tag, (void **)&sc->evt_detail_mem,
2111 	    BUS_DMA_NOWAIT, &sc->evt_detail_dmamap)) {
2112 		device_printf(sc->mrsas_dev, "Cannot alloc Event detail buffer memory\n");
2113 		return (ENOMEM);
2114 	}
2115 	bzero(sc->evt_detail_mem, evt_detail_size);
2116 	if (bus_dmamap_load(sc->evt_detail_tag, sc->evt_detail_dmamap,
2117 	    sc->evt_detail_mem, evt_detail_size, mrsas_addr_cb,
2118 	    &sc->evt_detail_phys_addr, BUS_DMA_NOWAIT)) {
2119 		device_printf(sc->mrsas_dev, "Cannot load Event detail buffer memory\n");
2120 		return (ENOMEM);
2121 	}
2122 
2123 	/*
2124 	 * Allocate for PD INFO structure
2125 	 */
2126 	pd_info_size = sizeof(struct mrsas_pd_info);
2127 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2128 	    1, 0,
2129 	    BUS_SPACE_MAXADDR_32BIT,
2130 	    BUS_SPACE_MAXADDR,
2131 	    NULL, NULL,
2132 	    pd_info_size,
2133 	    1,
2134 	    pd_info_size,
2135 	    BUS_DMA_ALLOCNOW,
2136 	    NULL, NULL,
2137 	    &sc->pd_info_tag)) {
2138 		device_printf(sc->mrsas_dev, "Cannot create PD INFO tag\n");
2139 		return (ENOMEM);
2140 	}
2141 	if (bus_dmamem_alloc(sc->pd_info_tag, (void **)&sc->pd_info_mem,
2142 	    BUS_DMA_NOWAIT, &sc->pd_info_dmamap)) {
2143 		device_printf(sc->mrsas_dev, "Cannot alloc PD INFO buffer memory\n");
2144 		return (ENOMEM);
2145 	}
2146 	bzero(sc->pd_info_mem, pd_info_size);
2147 	if (bus_dmamap_load(sc->pd_info_tag, sc->pd_info_dmamap,
2148 	    sc->pd_info_mem, pd_info_size, mrsas_addr_cb,
2149 	    &sc->pd_info_phys_addr, BUS_DMA_NOWAIT)) {
2150 		device_printf(sc->mrsas_dev, "Cannot load PD INFO buffer memory\n");
2151 		return (ENOMEM);
2152 	}
2153 
2154 	/*
2155 	 * Create a dma tag for data buffers; size will be the maximum
2156 	 * possible I/O size (280kB).
2157 	 */
2158 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2159 	    1,
2160 	    0,
2161 	    BUS_SPACE_MAXADDR,
2162 	    BUS_SPACE_MAXADDR,
2163 	    NULL, NULL,
2164 	    MAXPHYS,
2165 	    sc->max_num_sge,		/* nsegments */
2166 	    MAXPHYS,
2167 	    BUS_DMA_ALLOCNOW,
2168 	    busdma_lock_mutex,
2169 	    &sc->io_lock,
2170 	    &sc->data_tag)) {
2171 		device_printf(sc->mrsas_dev, "Cannot create data dma tag\n");
2172 		return (ENOMEM);
2173 	}
2174 	return (0);
2175 }
2176 
2177 /*
2178  * mrsas_addr_cb:	Callback function of bus_dmamap_load()
2179  * input:			callback argument, machine dependent type
2180  * 					that describes DMA segments, number of segments, error code
2181  *
2182  * This function is for the driver to receive mapping information resultant of
2183  * the bus_dmamap_load(). The information is actually not being used, but the
2184  * address is saved anyway.
2185  */
2186 void
2187 mrsas_addr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
2188 {
2189 	bus_addr_t *addr;
2190 
2191 	addr = arg;
2192 	*addr = segs[0].ds_addr;
2193 }
2194 
2195 /*
2196  * mrsas_setup_raidmap:	Set up RAID map.
2197  * input:				Adapter instance soft state
2198  *
2199  * Allocate DMA memory for the RAID maps and perform setup.
2200  */
2201 static int
2202 mrsas_setup_raidmap(struct mrsas_softc *sc)
2203 {
2204 	int i;
2205 
2206 	for (i = 0; i < 2; i++) {
2207 		sc->ld_drv_map[i] =
2208 		    (void *)malloc(sc->drv_map_sz, M_MRSAS, M_NOWAIT);
2209 		/* Do Error handling */
2210 		if (!sc->ld_drv_map[i]) {
2211 			device_printf(sc->mrsas_dev, "Could not allocate memory for local map");
2212 
2213 			if (i == 1)
2214 				free(sc->ld_drv_map[0], M_MRSAS);
2215 			/* ABORT driver initialization */
2216 			goto ABORT;
2217 		}
2218 	}
2219 
2220 	for (int i = 0; i < 2; i++) {
2221 		if (bus_dma_tag_create(sc->mrsas_parent_tag,
2222 		    4, 0,
2223 		    BUS_SPACE_MAXADDR_32BIT,
2224 		    BUS_SPACE_MAXADDR,
2225 		    NULL, NULL,
2226 		    sc->max_map_sz,
2227 		    1,
2228 		    sc->max_map_sz,
2229 		    BUS_DMA_ALLOCNOW,
2230 		    NULL, NULL,
2231 		    &sc->raidmap_tag[i])) {
2232 			device_printf(sc->mrsas_dev,
2233 			    "Cannot allocate raid map tag.\n");
2234 			return (ENOMEM);
2235 		}
2236 		if (bus_dmamem_alloc(sc->raidmap_tag[i],
2237 		    (void **)&sc->raidmap_mem[i],
2238 		    BUS_DMA_NOWAIT, &sc->raidmap_dmamap[i])) {
2239 			device_printf(sc->mrsas_dev,
2240 			    "Cannot allocate raidmap memory.\n");
2241 			return (ENOMEM);
2242 		}
2243 		bzero(sc->raidmap_mem[i], sc->max_map_sz);
2244 
2245 		if (bus_dmamap_load(sc->raidmap_tag[i], sc->raidmap_dmamap[i],
2246 		    sc->raidmap_mem[i], sc->max_map_sz,
2247 		    mrsas_addr_cb, &sc->raidmap_phys_addr[i],
2248 		    BUS_DMA_NOWAIT)) {
2249 			device_printf(sc->mrsas_dev, "Cannot load raidmap memory.\n");
2250 			return (ENOMEM);
2251 		}
2252 		if (!sc->raidmap_mem[i]) {
2253 			device_printf(sc->mrsas_dev,
2254 			    "Cannot allocate memory for raid map.\n");
2255 			return (ENOMEM);
2256 		}
2257 	}
2258 
2259 	if (!mrsas_get_map_info(sc))
2260 		mrsas_sync_map_info(sc);
2261 
2262 	return (0);
2263 
2264 ABORT:
2265 	return (1);
2266 }
2267 
2268 /**
2269  * megasas_setup_jbod_map -	setup jbod map for FP seq_number.
2270  * @sc:				Adapter soft state
2271  *
2272  * Return 0 on success.
2273  */
2274 void
2275 megasas_setup_jbod_map(struct mrsas_softc *sc)
2276 {
2277 	int i;
2278 	uint32_t pd_seq_map_sz;
2279 
2280 	pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
2281 	    (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1));
2282 
2283 	if (!sc->ctrl_info->adapterOperations3.useSeqNumJbodFP) {
2284 		sc->use_seqnum_jbod_fp = 0;
2285 		return;
2286 	}
2287 	if (sc->jbodmap_mem[0])
2288 		goto skip_alloc;
2289 
2290 	for (i = 0; i < 2; i++) {
2291 		if (bus_dma_tag_create(sc->mrsas_parent_tag,
2292 		    4, 0,
2293 		    BUS_SPACE_MAXADDR_32BIT,
2294 		    BUS_SPACE_MAXADDR,
2295 		    NULL, NULL,
2296 		    pd_seq_map_sz,
2297 		    1,
2298 		    pd_seq_map_sz,
2299 		    BUS_DMA_ALLOCNOW,
2300 		    NULL, NULL,
2301 		    &sc->jbodmap_tag[i])) {
2302 			device_printf(sc->mrsas_dev,
2303 			    "Cannot allocate jbod map tag.\n");
2304 			return;
2305 		}
2306 		if (bus_dmamem_alloc(sc->jbodmap_tag[i],
2307 		    (void **)&sc->jbodmap_mem[i],
2308 		    BUS_DMA_NOWAIT, &sc->jbodmap_dmamap[i])) {
2309 			device_printf(sc->mrsas_dev,
2310 			    "Cannot allocate jbod map memory.\n");
2311 			return;
2312 		}
2313 		bzero(sc->jbodmap_mem[i], pd_seq_map_sz);
2314 
2315 		if (bus_dmamap_load(sc->jbodmap_tag[i], sc->jbodmap_dmamap[i],
2316 		    sc->jbodmap_mem[i], pd_seq_map_sz,
2317 		    mrsas_addr_cb, &sc->jbodmap_phys_addr[i],
2318 		    BUS_DMA_NOWAIT)) {
2319 			device_printf(sc->mrsas_dev, "Cannot load jbod map memory.\n");
2320 			return;
2321 		}
2322 		if (!sc->jbodmap_mem[i]) {
2323 			device_printf(sc->mrsas_dev,
2324 			    "Cannot allocate memory for jbod map.\n");
2325 			sc->use_seqnum_jbod_fp = 0;
2326 			return;
2327 		}
2328 	}
2329 
2330 skip_alloc:
2331 	if (!megasas_sync_pd_seq_num(sc, false) &&
2332 	    !megasas_sync_pd_seq_num(sc, true))
2333 		sc->use_seqnum_jbod_fp = 1;
2334 	else
2335 		sc->use_seqnum_jbod_fp = 0;
2336 
2337 	device_printf(sc->mrsas_dev, "Jbod map is supported\n");
2338 }
2339 
2340 /*
2341  * mrsas_init_fw:	Initialize Firmware
2342  * input:			Adapter soft state
2343  *
2344  * Calls transition_to_ready() to make sure Firmware is in operational state and
2345  * calls mrsas_init_adapter() to send IOC_INIT command to Firmware.  It
2346  * issues internal commands to get the controller info after the IOC_INIT
2347  * command response is received by Firmware.  Note:  code relating to
2348  * get_pdlist, get_ld_list and max_sectors are currently not being used, it
2349  * is left here as placeholder.
2350  */
2351 static int
2352 mrsas_init_fw(struct mrsas_softc *sc)
2353 {
2354 
2355 	int ret, loop, ocr = 0;
2356 	u_int32_t max_sectors_1;
2357 	u_int32_t max_sectors_2;
2358 	u_int32_t tmp_sectors;
2359 	u_int32_t scratch_pad_2, scratch_pad_3, scratch_pad_4;
2360 	int msix_enable = 0;
2361 	int fw_msix_count = 0;
2362 	int i, j;
2363 
2364 	/* Make sure Firmware is ready */
2365 	ret = mrsas_transition_to_ready(sc, ocr);
2366 	if (ret != SUCCESS) {
2367 		return (ret);
2368 	}
2369 	if (sc->is_ventura || sc->is_aero) {
2370 		scratch_pad_3 = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, outbound_scratch_pad_3));
2371 #if VD_EXT_DEBUG
2372 		device_printf(sc->mrsas_dev, "scratch_pad_3 0x%x\n", scratch_pad_3);
2373 #endif
2374 		sc->maxRaidMapSize = ((scratch_pad_3 >>
2375 		    MR_MAX_RAID_MAP_SIZE_OFFSET_SHIFT) &
2376 		    MR_MAX_RAID_MAP_SIZE_MASK);
2377 	}
2378 	/* MSI-x index 0- reply post host index register */
2379 	sc->msix_reg_offset[0] = MPI2_REPLY_POST_HOST_INDEX_OFFSET;
2380 	/* Check if MSI-X is supported while in ready state */
2381 	msix_enable = (mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)) & 0x4000000) >> 0x1a;
2382 
2383 	if (msix_enable) {
2384 		scratch_pad_2 = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
2385 		    outbound_scratch_pad_2));
2386 
2387 		/* Check max MSI-X vectors */
2388 		if (sc->device_id == MRSAS_TBOLT) {
2389 			sc->msix_vectors = (scratch_pad_2
2390 			    & MR_MAX_REPLY_QUEUES_OFFSET) + 1;
2391 			fw_msix_count = sc->msix_vectors;
2392 		} else {
2393 			/* Invader/Fury supports 96 MSI-X vectors */
2394 			sc->msix_vectors = ((scratch_pad_2
2395 			    & MR_MAX_REPLY_QUEUES_EXT_OFFSET)
2396 			    >> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
2397 			fw_msix_count = sc->msix_vectors;
2398 
2399 			if ((sc->mrsas_gen3_ctrl && (sc->msix_vectors > 8)) ||
2400 				((sc->is_ventura || sc->is_aero) && (sc->msix_vectors > 16)))
2401 				sc->msix_combined = true;
2402 			/*
2403 			 * Save 1-15 reply post index
2404 			 * address to local memory Index 0
2405 			 * is already saved from reg offset
2406 			 * MPI2_REPLY_POST_HOST_INDEX_OFFSET
2407 			 */
2408 			for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY;
2409 			    loop++) {
2410 				sc->msix_reg_offset[loop] =
2411 				    MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET +
2412 				    (loop * 0x10);
2413 			}
2414 		}
2415 
2416 		/* Don't bother allocating more MSI-X vectors than cpus */
2417 		sc->msix_vectors = min(sc->msix_vectors,
2418 		    mp_ncpus);
2419 
2420 		/* Allocate MSI-x vectors */
2421 		if (mrsas_allocate_msix(sc) == SUCCESS)
2422 			sc->msix_enable = 1;
2423 		else
2424 			sc->msix_enable = 0;
2425 
2426 		device_printf(sc->mrsas_dev, "FW supports <%d> MSIX vector,"
2427 		    "Online CPU %d Current MSIX <%d>\n",
2428 		    fw_msix_count, mp_ncpus, sc->msix_vectors);
2429 	}
2430 	/*
2431      * MSI-X host index 0 is common for all adapter.
2432      * It is used for all MPT based Adapters.
2433 	 */
2434 	if (sc->msix_combined) {
2435 		sc->msix_reg_offset[0] =
2436 		    MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET;
2437 	}
2438 	if (mrsas_init_adapter(sc) != SUCCESS) {
2439 		device_printf(sc->mrsas_dev, "Adapter initialize Fail.\n");
2440 		return (1);
2441 	}
2442 
2443 	if (sc->is_ventura || sc->is_aero) {
2444 		scratch_pad_4 = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
2445 		    outbound_scratch_pad_4));
2446 		if ((scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK) >= MR_DEFAULT_NVME_PAGE_SHIFT)
2447 			sc->nvme_page_size = 1 << (scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK);
2448 
2449 		device_printf(sc->mrsas_dev, "NVME page size\t: (%d)\n", sc->nvme_page_size);
2450 	}
2451 
2452 	/* Allocate internal commands for pass-thru */
2453 	if (mrsas_alloc_mfi_cmds(sc) != SUCCESS) {
2454 		device_printf(sc->mrsas_dev, "Allocate MFI cmd failed.\n");
2455 		return (1);
2456 	}
2457 	sc->ctrl_info = malloc(sizeof(struct mrsas_ctrl_info), M_MRSAS, M_NOWAIT);
2458 	if (!sc->ctrl_info) {
2459 		device_printf(sc->mrsas_dev, "Malloc for ctrl_info failed.\n");
2460 		return (1);
2461 	}
2462 	/*
2463 	 * Get the controller info from FW, so that the MAX VD support
2464 	 * availability can be decided.
2465 	 */
2466 	if (mrsas_get_ctrl_info(sc)) {
2467 		device_printf(sc->mrsas_dev, "Unable to get FW ctrl_info.\n");
2468 		return (1);
2469 	}
2470 	sc->secure_jbod_support =
2471 	    (u_int8_t)sc->ctrl_info->adapterOperations3.supportSecurityonJBOD;
2472 
2473 	if (sc->secure_jbod_support)
2474 		device_printf(sc->mrsas_dev, "FW supports SED \n");
2475 
2476 	if (sc->use_seqnum_jbod_fp)
2477 		device_printf(sc->mrsas_dev, "FW supports JBOD Map \n");
2478 
2479 	if (sc->support_morethan256jbod)
2480 		device_printf(sc->mrsas_dev, "FW supports JBOD Map Ext \n");
2481 
2482 	if (mrsas_setup_raidmap(sc) != SUCCESS) {
2483 		device_printf(sc->mrsas_dev, "Error: RAID map setup FAILED !!! "
2484 		    "There seems to be some problem in the controller\n"
2485 		    "Please contact to the SUPPORT TEAM if the problem persists\n");
2486 	}
2487 	megasas_setup_jbod_map(sc);
2488 
2489 
2490 	memset(sc->target_list, 0,
2491 		MRSAS_MAX_TM_TARGETS * sizeof(struct mrsas_target));
2492 	for (i = 0; i < MRSAS_MAX_TM_TARGETS; i++)
2493 		sc->target_list[i].target_id = 0xffff;
2494 
2495 	/* For pass-thru, get PD/LD list and controller info */
2496 	memset(sc->pd_list, 0,
2497 	    MRSAS_MAX_PD * sizeof(struct mrsas_pd_list));
2498 	if (mrsas_get_pd_list(sc) != SUCCESS) {
2499 		device_printf(sc->mrsas_dev, "Get PD list failed.\n");
2500 		return (1);
2501 	}
2502 	memset(sc->ld_ids, 0xff, MRSAS_MAX_LD_IDS);
2503 	if (mrsas_get_ld_list(sc) != SUCCESS) {
2504 		device_printf(sc->mrsas_dev, "Get LD lsit failed.\n");
2505 		return (1);
2506 	}
2507 
2508 	if ((sc->is_ventura || sc->is_aero) && sc->drv_stream_detection) {
2509 		sc->streamDetectByLD = malloc(sizeof(PTR_LD_STREAM_DETECT) *
2510 						MAX_LOGICAL_DRIVES_EXT, M_MRSAS, M_NOWAIT);
2511 		if (!sc->streamDetectByLD) {
2512 			device_printf(sc->mrsas_dev,
2513 				"unable to allocate stream detection for pool of LDs\n");
2514 			return (1);
2515 		}
2516 		for (i = 0; i < MAX_LOGICAL_DRIVES_EXT; ++i) {
2517 			sc->streamDetectByLD[i] = malloc(sizeof(LD_STREAM_DETECT), M_MRSAS, M_NOWAIT);
2518 			if (!sc->streamDetectByLD[i]) {
2519 				device_printf(sc->mrsas_dev, "unable to allocate stream detect by LD\n");
2520 				for (j = 0; j < i; ++j)
2521 					free(sc->streamDetectByLD[j], M_MRSAS);
2522 				free(sc->streamDetectByLD, M_MRSAS);
2523 				sc->streamDetectByLD = NULL;
2524 				return (1);
2525 			}
2526 			memset(sc->streamDetectByLD[i], 0, sizeof(LD_STREAM_DETECT));
2527 			sc->streamDetectByLD[i]->mruBitMap = MR_STREAM_BITMAP;
2528 		}
2529 	}
2530 
2531 	/*
2532 	 * Compute the max allowed sectors per IO: The controller info has
2533 	 * two limits on max sectors. Driver should use the minimum of these
2534 	 * two.
2535 	 *
2536 	 * 1 << stripe_sz_ops.min = max sectors per strip
2537 	 *
2538 	 * Note that older firmwares ( < FW ver 30) didn't report information to
2539 	 * calculate max_sectors_1. So the number ended up as zero always.
2540 	 */
2541 	tmp_sectors = 0;
2542 	max_sectors_1 = (1 << sc->ctrl_info->stripe_sz_ops.min) *
2543 	    sc->ctrl_info->max_strips_per_io;
2544 	max_sectors_2 = sc->ctrl_info->max_request_size;
2545 	tmp_sectors = min(max_sectors_1, max_sectors_2);
2546 	sc->max_sectors_per_req = sc->max_num_sge * MRSAS_PAGE_SIZE / 512;
2547 
2548 	if (tmp_sectors && (sc->max_sectors_per_req > tmp_sectors))
2549 		sc->max_sectors_per_req = tmp_sectors;
2550 
2551 	sc->disableOnlineCtrlReset =
2552 	    sc->ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
2553 	sc->UnevenSpanSupport =
2554 	    sc->ctrl_info->adapterOperations2.supportUnevenSpans;
2555 	if (sc->UnevenSpanSupport) {
2556 		device_printf(sc->mrsas_dev, "FW supports: UnevenSpanSupport=%x\n\n",
2557 		    sc->UnevenSpanSupport);
2558 
2559 		if (MR_ValidateMapInfo(sc))
2560 			sc->fast_path_io = 1;
2561 		else
2562 			sc->fast_path_io = 0;
2563 	}
2564 
2565 	device_printf(sc->mrsas_dev, "max_fw_cmds: %u  max_scsi_cmds: %u\n",
2566 		sc->max_fw_cmds, sc->max_scsi_cmds);
2567 	return (0);
2568 }
2569 
2570 /*
2571  * mrsas_init_adapter:	Initializes the adapter/controller
2572  * input:				Adapter soft state
2573  *
2574  * Prepares for the issuing of the IOC Init cmd to FW for initializing the
2575  * ROC/controller.  The FW register is read to determined the number of
2576  * commands that is supported.  All memory allocations for IO is based on
2577  * max_cmd.  Appropriate calculations are performed in this function.
2578  */
2579 int
2580 mrsas_init_adapter(struct mrsas_softc *sc)
2581 {
2582 	uint32_t status;
2583 	u_int32_t scratch_pad_2;
2584 	int ret;
2585 	int i = 0;
2586 
2587 	/* Read FW status register */
2588 	status = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, outbound_scratch_pad));
2589 
2590 	sc->max_fw_cmds = status & MRSAS_FWSTATE_MAXCMD_MASK;
2591 
2592 	/* Decrement the max supported by 1, to correlate with FW */
2593 	sc->max_fw_cmds = sc->max_fw_cmds - 1;
2594 	sc->max_scsi_cmds = sc->max_fw_cmds - MRSAS_MAX_MFI_CMDS;
2595 
2596 	/* Determine allocation size of command frames */
2597 	sc->reply_q_depth = ((sc->max_fw_cmds + 1 + 15) / 16 * 16) * 2;
2598 	sc->request_alloc_sz = sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION) * sc->max_fw_cmds;
2599 	sc->reply_alloc_sz = sizeof(MPI2_REPLY_DESCRIPTORS_UNION) * (sc->reply_q_depth);
2600 	sc->io_frames_alloc_sz = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE +
2601 	    (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * (sc->max_fw_cmds + 1));
2602 	scratch_pad_2 = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
2603 	    outbound_scratch_pad_2));
2604 	/*
2605 	 * If scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK is set,
2606 	 * Firmware support extended IO chain frame which is 4 time more
2607 	 * than legacy Firmware. Legacy Firmware - Frame size is (8 * 128) =
2608 	 * 1K 1M IO Firmware  - Frame size is (8 * 128 * 4)  = 4K
2609 	 */
2610 	if (scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK)
2611 		sc->max_chain_frame_sz =
2612 		    ((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >> 5)
2613 		    * MEGASAS_1MB_IO;
2614 	else
2615 		sc->max_chain_frame_sz =
2616 		    ((scratch_pad_2 & MEGASAS_MAX_CHAIN_SIZE_MASK) >> 5)
2617 		    * MEGASAS_256K_IO;
2618 
2619 	sc->chain_frames_alloc_sz = sc->max_chain_frame_sz * sc->max_fw_cmds;
2620 	sc->max_sge_in_main_msg = (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
2621 	    offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL)) / 16;
2622 
2623 	sc->max_sge_in_chain = sc->max_chain_frame_sz / sizeof(MPI2_SGE_IO_UNION);
2624 	sc->max_num_sge = sc->max_sge_in_main_msg + sc->max_sge_in_chain - 2;
2625 
2626 	mrsas_dprint(sc, MRSAS_INFO,
2627 	    "max sge: 0x%x, max chain frame size: 0x%x, "
2628 	    "max fw cmd: 0x%x\n", sc->max_num_sge,
2629 	    sc->max_chain_frame_sz, sc->max_fw_cmds);
2630 
2631 	/* Used for pass thru MFI frame (DCMD) */
2632 	sc->chain_offset_mfi_pthru = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 16;
2633 
2634 	sc->chain_offset_io_request = (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
2635 	    sizeof(MPI2_SGE_IO_UNION)) / 16;
2636 
2637 	int count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
2638 
2639 	for (i = 0; i < count; i++)
2640 		sc->last_reply_idx[i] = 0;
2641 
2642 	ret = mrsas_alloc_mem(sc);
2643 	if (ret != SUCCESS)
2644 		return (ret);
2645 
2646 	ret = mrsas_alloc_mpt_cmds(sc);
2647 	if (ret != SUCCESS)
2648 		return (ret);
2649 
2650 	ret = mrsas_ioc_init(sc);
2651 	if (ret != SUCCESS)
2652 		return (ret);
2653 
2654 	return (0);
2655 }
2656 
2657 /*
2658  * mrsas_alloc_ioc_cmd:	Allocates memory for IOC Init command
2659  * input:				Adapter soft state
2660  *
2661  * Allocates for the IOC Init cmd to FW to initialize the ROC/controller.
2662  */
2663 int
2664 mrsas_alloc_ioc_cmd(struct mrsas_softc *sc)
2665 {
2666 	int ioc_init_size;
2667 
2668 	/* Allocate IOC INIT command */
2669 	ioc_init_size = 1024 + sizeof(MPI2_IOC_INIT_REQUEST);
2670 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
2671 	    1, 0,
2672 	    BUS_SPACE_MAXADDR_32BIT,
2673 	    BUS_SPACE_MAXADDR,
2674 	    NULL, NULL,
2675 	    ioc_init_size,
2676 	    1,
2677 	    ioc_init_size,
2678 	    BUS_DMA_ALLOCNOW,
2679 	    NULL, NULL,
2680 	    &sc->ioc_init_tag)) {
2681 		device_printf(sc->mrsas_dev, "Cannot allocate ioc init tag\n");
2682 		return (ENOMEM);
2683 	}
2684 	if (bus_dmamem_alloc(sc->ioc_init_tag, (void **)&sc->ioc_init_mem,
2685 	    BUS_DMA_NOWAIT, &sc->ioc_init_dmamap)) {
2686 		device_printf(sc->mrsas_dev, "Cannot allocate ioc init cmd mem\n");
2687 		return (ENOMEM);
2688 	}
2689 	bzero(sc->ioc_init_mem, ioc_init_size);
2690 	if (bus_dmamap_load(sc->ioc_init_tag, sc->ioc_init_dmamap,
2691 	    sc->ioc_init_mem, ioc_init_size, mrsas_addr_cb,
2692 	    &sc->ioc_init_phys_mem, BUS_DMA_NOWAIT)) {
2693 		device_printf(sc->mrsas_dev, "Cannot load ioc init cmd mem\n");
2694 		return (ENOMEM);
2695 	}
2696 	return (0);
2697 }
2698 
2699 /*
2700  * mrsas_free_ioc_cmd:	Allocates memory for IOC Init command
2701  * input:				Adapter soft state
2702  *
2703  * Deallocates memory of the IOC Init cmd.
2704  */
2705 void
2706 mrsas_free_ioc_cmd(struct mrsas_softc *sc)
2707 {
2708 	if (sc->ioc_init_phys_mem)
2709 		bus_dmamap_unload(sc->ioc_init_tag, sc->ioc_init_dmamap);
2710 	if (sc->ioc_init_mem != NULL)
2711 		bus_dmamem_free(sc->ioc_init_tag, sc->ioc_init_mem, sc->ioc_init_dmamap);
2712 	if (sc->ioc_init_tag != NULL)
2713 		bus_dma_tag_destroy(sc->ioc_init_tag);
2714 }
2715 
2716 /*
2717  * mrsas_ioc_init:	Sends IOC Init command to FW
2718  * input:			Adapter soft state
2719  *
2720  * Issues the IOC Init cmd to FW to initialize the ROC/controller.
2721  */
2722 int
2723 mrsas_ioc_init(struct mrsas_softc *sc)
2724 {
2725 	struct mrsas_init_frame *init_frame;
2726 	pMpi2IOCInitRequest_t IOCInitMsg;
2727 	MRSAS_REQUEST_DESCRIPTOR_UNION req_desc;
2728 	u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME;
2729 	bus_addr_t phys_addr;
2730 	int i, retcode = 0;
2731 	u_int32_t scratch_pad_2;
2732 
2733 	/* Allocate memory for the IOC INIT command */
2734 	if (mrsas_alloc_ioc_cmd(sc)) {
2735 		device_printf(sc->mrsas_dev, "Cannot allocate IOC command.\n");
2736 		return (1);
2737 	}
2738 
2739 	if (!sc->block_sync_cache) {
2740 		scratch_pad_2 = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
2741 		    outbound_scratch_pad_2));
2742 		sc->fw_sync_cache_support = (scratch_pad_2 &
2743 		    MR_CAN_HANDLE_SYNC_CACHE_OFFSET) ? 1 : 0;
2744 	}
2745 
2746 	IOCInitMsg = (pMpi2IOCInitRequest_t)(((char *)sc->ioc_init_mem) + 1024);
2747 	IOCInitMsg->Function = MPI2_FUNCTION_IOC_INIT;
2748 	IOCInitMsg->WhoInit = MPI2_WHOINIT_HOST_DRIVER;
2749 	IOCInitMsg->MsgVersion = MPI2_VERSION;
2750 	IOCInitMsg->HeaderVersion = MPI2_HEADER_VERSION;
2751 	IOCInitMsg->SystemRequestFrameSize = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE / 4;
2752 	IOCInitMsg->ReplyDescriptorPostQueueDepth = sc->reply_q_depth;
2753 	IOCInitMsg->ReplyDescriptorPostQueueAddress = sc->reply_desc_phys_addr;
2754 	IOCInitMsg->SystemRequestFrameBaseAddress = sc->io_request_phys_addr;
2755 	IOCInitMsg->HostMSIxVectors = (sc->msix_vectors > 0 ? sc->msix_vectors : 0);
2756 	IOCInitMsg->HostPageSize = MR_DEFAULT_NVME_PAGE_SHIFT;
2757 
2758 	init_frame = (struct mrsas_init_frame *)sc->ioc_init_mem;
2759 	init_frame->cmd = MFI_CMD_INIT;
2760 	init_frame->cmd_status = 0xFF;
2761 	init_frame->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
2762 
2763 	/* driver support Extended MSIX */
2764 	if (sc->mrsas_gen3_ctrl || sc->is_ventura || sc->is_aero) {
2765 		init_frame->driver_operations.
2766 		    mfi_capabilities.support_additional_msix = 1;
2767 	}
2768 	if (sc->verbuf_mem) {
2769 		snprintf((char *)sc->verbuf_mem, strlen(MRSAS_VERSION) + 2, "%s\n",
2770 		    MRSAS_VERSION);
2771 		init_frame->driver_ver_lo = (bus_addr_t)sc->verbuf_phys_addr;
2772 		init_frame->driver_ver_hi = 0;
2773 	}
2774 	init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb = 1;
2775 	init_frame->driver_operations.mfi_capabilities.support_max_255lds = 1;
2776 	init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw = 1;
2777 	if (sc->max_chain_frame_sz > MEGASAS_CHAIN_FRAME_SZ_MIN)
2778 		init_frame->driver_operations.mfi_capabilities.support_ext_io_size = 1;
2779 	phys_addr = (bus_addr_t)sc->ioc_init_phys_mem + 1024;
2780 	init_frame->queue_info_new_phys_addr_lo = phys_addr;
2781 	init_frame->data_xfer_len = sizeof(Mpi2IOCInitRequest_t);
2782 
2783 	req_desc.addr.Words = (bus_addr_t)sc->ioc_init_phys_mem;
2784 	req_desc.MFAIo.RequestFlags =
2785 	    (MRSAS_REQ_DESCRIPT_FLAGS_MFA << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
2786 
2787 	mrsas_disable_intr(sc);
2788 	mrsas_dprint(sc, MRSAS_OCR, "Issuing IOC INIT command to FW.\n");
2789 	mrsas_write_64bit_req_desc(sc, req_desc.addr.u.low, req_desc.addr.u.high);
2790 
2791 	/*
2792 	 * Poll response timer to wait for Firmware response.  While this
2793 	 * timer with the DELAY call could block CPU, the time interval for
2794 	 * this is only 1 millisecond.
2795 	 */
2796 	if (init_frame->cmd_status == 0xFF) {
2797 		for (i = 0; i < (max_wait * 1000); i++) {
2798 			if (init_frame->cmd_status == 0xFF)
2799 				DELAY(1000);
2800 			else
2801 				break;
2802 		}
2803 	}
2804 	if (init_frame->cmd_status == 0)
2805 		mrsas_dprint(sc, MRSAS_OCR,
2806 		    "IOC INIT response received from FW.\n");
2807 	else {
2808 		if (init_frame->cmd_status == 0xFF)
2809 			device_printf(sc->mrsas_dev, "IOC Init timed out after %d seconds.\n", max_wait);
2810 		else
2811 			device_printf(sc->mrsas_dev, "IOC Init failed, status = 0x%x\n", init_frame->cmd_status);
2812 		retcode = 1;
2813 	}
2814 
2815 	if (sc->is_aero) {
2816 		scratch_pad_2 = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
2817 		    outbound_scratch_pad_2));
2818 		sc->atomic_desc_support = (scratch_pad_2 &
2819 			MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET) ? 1 : 0;
2820 		device_printf(sc->mrsas_dev, "FW supports atomic descriptor: %s\n",
2821 			sc->atomic_desc_support ? "Yes" : "No");
2822 	}
2823 
2824 	mrsas_free_ioc_cmd(sc);
2825 	return (retcode);
2826 }
2827 
2828 /*
2829  * mrsas_alloc_mpt_cmds:	Allocates the command packets
2830  * input:					Adapter instance soft state
2831  *
2832  * This function allocates the internal commands for IOs. Each command that is
2833  * issued to FW is wrapped in a local data structure called mrsas_mpt_cmd. An
2834  * array is allocated with mrsas_mpt_cmd context.  The free commands are
2835  * maintained in a linked list (cmd pool). SMID value range is from 1 to
2836  * max_fw_cmds.
2837  */
2838 int
2839 mrsas_alloc_mpt_cmds(struct mrsas_softc *sc)
2840 {
2841 	int i, j;
2842 	u_int32_t max_fw_cmds, count;
2843 	struct mrsas_mpt_cmd *cmd;
2844 	pMpi2ReplyDescriptorsUnion_t reply_desc;
2845 	u_int32_t offset, chain_offset, sense_offset;
2846 	bus_addr_t io_req_base_phys, chain_frame_base_phys, sense_base_phys;
2847 	u_int8_t *io_req_base, *chain_frame_base, *sense_base;
2848 
2849 	max_fw_cmds = sc->max_fw_cmds;
2850 
2851 	sc->req_desc = malloc(sc->request_alloc_sz, M_MRSAS, M_NOWAIT);
2852 	if (!sc->req_desc) {
2853 		device_printf(sc->mrsas_dev, "Out of memory, cannot alloc req desc\n");
2854 		return (ENOMEM);
2855 	}
2856 	memset(sc->req_desc, 0, sc->request_alloc_sz);
2857 
2858 	/*
2859 	 * sc->mpt_cmd_list is an array of struct mrsas_mpt_cmd pointers.
2860 	 * Allocate the dynamic array first and then allocate individual
2861 	 * commands.
2862 	 */
2863 	sc->mpt_cmd_list = malloc(sizeof(struct mrsas_mpt_cmd *) * max_fw_cmds,
2864 	    M_MRSAS, M_NOWAIT);
2865 	if (!sc->mpt_cmd_list) {
2866 		device_printf(sc->mrsas_dev, "Cannot alloc memory for mpt_cmd_list.\n");
2867 		return (ENOMEM);
2868 	}
2869 	memset(sc->mpt_cmd_list, 0, sizeof(struct mrsas_mpt_cmd *) * max_fw_cmds);
2870 	for (i = 0; i < max_fw_cmds; i++) {
2871 		sc->mpt_cmd_list[i] = malloc(sizeof(struct mrsas_mpt_cmd),
2872 		    M_MRSAS, M_NOWAIT);
2873 		if (!sc->mpt_cmd_list[i]) {
2874 			for (j = 0; j < i; j++)
2875 				free(sc->mpt_cmd_list[j], M_MRSAS);
2876 			free(sc->mpt_cmd_list, M_MRSAS);
2877 			sc->mpt_cmd_list = NULL;
2878 			return (ENOMEM);
2879 		}
2880 	}
2881 
2882 	io_req_base = (u_int8_t *)sc->io_request_mem + MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
2883 	io_req_base_phys = (bus_addr_t)sc->io_request_phys_addr + MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
2884 	chain_frame_base = (u_int8_t *)sc->chain_frame_mem;
2885 	chain_frame_base_phys = (bus_addr_t)sc->chain_frame_phys_addr;
2886 	sense_base = (u_int8_t *)sc->sense_mem;
2887 	sense_base_phys = (bus_addr_t)sc->sense_phys_addr;
2888 	for (i = 0; i < max_fw_cmds; i++) {
2889 		cmd = sc->mpt_cmd_list[i];
2890 		offset = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * i;
2891 		chain_offset = sc->max_chain_frame_sz * i;
2892 		sense_offset = MRSAS_SENSE_LEN * i;
2893 		memset(cmd, 0, sizeof(struct mrsas_mpt_cmd));
2894 		cmd->index = i + 1;
2895 		cmd->ccb_ptr = NULL;
2896 		cmd->r1_alt_dev_handle = MR_DEVHANDLE_INVALID;
2897 		callout_init_mtx(&cmd->cm_callout, &sc->sim_lock, 0);
2898 		cmd->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX;
2899 		cmd->sc = sc;
2900 		cmd->io_request = (MRSAS_RAID_SCSI_IO_REQUEST *) (io_req_base + offset);
2901 		memset(cmd->io_request, 0, sizeof(MRSAS_RAID_SCSI_IO_REQUEST));
2902 		cmd->io_request_phys_addr = io_req_base_phys + offset;
2903 		cmd->chain_frame = (MPI2_SGE_IO_UNION *) (chain_frame_base + chain_offset);
2904 		cmd->chain_frame_phys_addr = chain_frame_base_phys + chain_offset;
2905 		cmd->sense = sense_base + sense_offset;
2906 		cmd->sense_phys_addr = sense_base_phys + sense_offset;
2907 		if (bus_dmamap_create(sc->data_tag, 0, &cmd->data_dmamap)) {
2908 			return (FAIL);
2909 		}
2910 		TAILQ_INSERT_TAIL(&(sc->mrsas_mpt_cmd_list_head), cmd, next);
2911 	}
2912 
2913 	/* Initialize reply descriptor array to 0xFFFFFFFF */
2914 	reply_desc = sc->reply_desc_mem;
2915 	count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
2916 	for (i = 0; i < sc->reply_q_depth * count; i++, reply_desc++) {
2917 		reply_desc->Words = MRSAS_ULONG_MAX;
2918 	}
2919 	return (0);
2920 }
2921 
2922 /*
2923  * mrsas_write_64bit_req_dsc:	Writes 64 bit request descriptor to FW
2924  * input:			Adapter softstate
2925  * 				request descriptor address low
2926  * 				request descriptor address high
2927  */
2928 void
2929 mrsas_write_64bit_req_desc(struct mrsas_softc *sc, u_int32_t req_desc_lo,
2930     u_int32_t req_desc_hi)
2931 {
2932 	mtx_lock(&sc->pci_lock);
2933 	mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_low_queue_port),
2934 	    req_desc_lo);
2935 	mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_high_queue_port),
2936 	    req_desc_hi);
2937 	mtx_unlock(&sc->pci_lock);
2938 }
2939 
2940 /*
2941  * mrsas_fire_cmd:	Sends command to FW
2942  * input:		Adapter softstate
2943  * 			request descriptor address low
2944  * 			request descriptor address high
2945  *
2946  * This functions fires the command to Firmware by writing to the
2947  * inbound_low_queue_port and inbound_high_queue_port.
2948  */
2949 void
2950 mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo,
2951     u_int32_t req_desc_hi)
2952 {
2953 	if (sc->atomic_desc_support)
2954 		mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_single_queue_port),
2955 		    req_desc_lo);
2956 	else
2957 		mrsas_write_64bit_req_desc(sc, req_desc_lo, req_desc_hi);
2958 }
2959 
2960 /*
2961  * mrsas_transition_to_ready:  Move FW to Ready state input:
2962  * Adapter instance soft state
2963  *
2964  * During the initialization, FW passes can potentially be in any one of several
2965  * possible states. If the FW in operational, waiting-for-handshake states,
2966  * driver must take steps to bring it to ready state. Otherwise, it has to
2967  * wait for the ready state.
2968  */
2969 int
2970 mrsas_transition_to_ready(struct mrsas_softc *sc, int ocr)
2971 {
2972 	int i;
2973 	u_int8_t max_wait;
2974 	u_int32_t val, fw_state;
2975 	u_int32_t cur_state;
2976 	u_int32_t abs_state, curr_abs_state;
2977 
2978 	val = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, outbound_scratch_pad));
2979 	fw_state = val & MFI_STATE_MASK;
2980 	max_wait = MRSAS_RESET_WAIT_TIME;
2981 
2982 	if (fw_state != MFI_STATE_READY)
2983 		device_printf(sc->mrsas_dev, "Waiting for FW to come to ready state\n");
2984 
2985 	while (fw_state != MFI_STATE_READY) {
2986 		abs_state = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, outbound_scratch_pad));
2987 		switch (fw_state) {
2988 		case MFI_STATE_FAULT:
2989 			device_printf(sc->mrsas_dev, "FW is in FAULT state!!\n");
2990 			if (ocr) {
2991 				cur_state = MFI_STATE_FAULT;
2992 				break;
2993 			} else
2994 				return -ENODEV;
2995 		case MFI_STATE_WAIT_HANDSHAKE:
2996 			/* Set the CLR bit in inbound doorbell */
2997 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell),
2998 			    MFI_INIT_CLEAR_HANDSHAKE | MFI_INIT_HOTPLUG);
2999 			cur_state = MFI_STATE_WAIT_HANDSHAKE;
3000 			break;
3001 		case MFI_STATE_BOOT_MESSAGE_PENDING:
3002 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell),
3003 			    MFI_INIT_HOTPLUG);
3004 			cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
3005 			break;
3006 		case MFI_STATE_OPERATIONAL:
3007 			/*
3008 			 * Bring it to READY state; assuming max wait 10
3009 			 * secs
3010 			 */
3011 			mrsas_disable_intr(sc);
3012 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), MFI_RESET_FLAGS);
3013 			for (i = 0; i < max_wait * 1000; i++) {
3014 				if (mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set, doorbell)) & 1)
3015 					DELAY(1000);
3016 				else
3017 					break;
3018 			}
3019 			cur_state = MFI_STATE_OPERATIONAL;
3020 			break;
3021 		case MFI_STATE_UNDEFINED:
3022 			/*
3023 			 * This state should not last for more than 2
3024 			 * seconds
3025 			 */
3026 			cur_state = MFI_STATE_UNDEFINED;
3027 			break;
3028 		case MFI_STATE_BB_INIT:
3029 			cur_state = MFI_STATE_BB_INIT;
3030 			break;
3031 		case MFI_STATE_FW_INIT:
3032 			cur_state = MFI_STATE_FW_INIT;
3033 			break;
3034 		case MFI_STATE_FW_INIT_2:
3035 			cur_state = MFI_STATE_FW_INIT_2;
3036 			break;
3037 		case MFI_STATE_DEVICE_SCAN:
3038 			cur_state = MFI_STATE_DEVICE_SCAN;
3039 			break;
3040 		case MFI_STATE_FLUSH_CACHE:
3041 			cur_state = MFI_STATE_FLUSH_CACHE;
3042 			break;
3043 		default:
3044 			device_printf(sc->mrsas_dev, "Unknown state 0x%x\n", fw_state);
3045 			return -ENODEV;
3046 		}
3047 
3048 		/*
3049 		 * The cur_state should not last for more than max_wait secs
3050 		 */
3051 		for (i = 0; i < (max_wait * 1000); i++) {
3052 			fw_state = (mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3053 			    outbound_scratch_pad)) & MFI_STATE_MASK);
3054 			curr_abs_state = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3055 			    outbound_scratch_pad));
3056 			if (abs_state == curr_abs_state)
3057 				DELAY(1000);
3058 			else
3059 				break;
3060 		}
3061 
3062 		/*
3063 		 * Return error if fw_state hasn't changed after max_wait
3064 		 */
3065 		if (curr_abs_state == abs_state) {
3066 			device_printf(sc->mrsas_dev, "FW state [%d] hasn't changed "
3067 			    "in %d secs\n", fw_state, max_wait);
3068 			return -ENODEV;
3069 		}
3070 	}
3071 	mrsas_dprint(sc, MRSAS_OCR, "FW now in Ready state\n");
3072 	return 0;
3073 }
3074 
3075 /*
3076  * mrsas_get_mfi_cmd:	Get a cmd from free command pool
3077  * input:				Adapter soft state
3078  *
3079  * This function removes an MFI command from the command list.
3080  */
3081 struct mrsas_mfi_cmd *
3082 mrsas_get_mfi_cmd(struct mrsas_softc *sc)
3083 {
3084 	struct mrsas_mfi_cmd *cmd = NULL;
3085 
3086 	mtx_lock(&sc->mfi_cmd_pool_lock);
3087 	if (!TAILQ_EMPTY(&sc->mrsas_mfi_cmd_list_head)) {
3088 		cmd = TAILQ_FIRST(&sc->mrsas_mfi_cmd_list_head);
3089 		TAILQ_REMOVE(&sc->mrsas_mfi_cmd_list_head, cmd, next);
3090 	}
3091 	mtx_unlock(&sc->mfi_cmd_pool_lock);
3092 
3093 	return cmd;
3094 }
3095 
3096 /*
3097  * mrsas_ocr_thread:	Thread to handle OCR/Kill Adapter.
3098  * input:				Adapter Context.
3099  *
3100  * This function will check FW status register and flag do_timeout_reset flag.
3101  * It will do OCR/Kill adapter if FW is in fault state or IO timed out has
3102  * trigger reset.
3103  */
3104 static void
3105 mrsas_ocr_thread(void *arg)
3106 {
3107 	struct mrsas_softc *sc;
3108 	u_int32_t fw_status, fw_state;
3109 	u_int8_t tm_target_reset_failed = 0;
3110 
3111 	sc = (struct mrsas_softc *)arg;
3112 
3113 	mrsas_dprint(sc, MRSAS_TRACE, "%s\n", __func__);
3114 
3115 	sc->ocr_thread_active = 1;
3116 	mtx_lock(&sc->sim_lock);
3117 	for (;;) {
3118 		/* Sleep for 1 second and check the queue status */
3119 		msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO,
3120 		    "mrsas_ocr", sc->mrsas_fw_fault_check_delay * hz);
3121 		if (sc->remove_in_progress ||
3122 		    sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) {
3123 			mrsas_dprint(sc, MRSAS_OCR,
3124 			    "Exit due to %s from %s\n",
3125 			    sc->remove_in_progress ? "Shutdown" :
3126 			    "Hardware critical error", __func__);
3127 			break;
3128 		}
3129 		fw_status = mrsas_read_reg_with_retries(sc,
3130 		    offsetof(mrsas_reg_set, outbound_scratch_pad));
3131 		fw_state = fw_status & MFI_STATE_MASK;
3132 		if (fw_state == MFI_STATE_FAULT || sc->do_timedout_reset ||
3133 			mrsas_atomic_read(&sc->target_reset_outstanding)) {
3134 
3135 			/* First, freeze further IOs to come to the SIM */
3136 			mrsas_xpt_freeze(sc);
3137 
3138 			/* If this is an IO timeout then go for target reset */
3139 			if (mrsas_atomic_read(&sc->target_reset_outstanding)) {
3140 				device_printf(sc->mrsas_dev, "Initiating Target RESET "
3141 				    "because of SCSI IO timeout!\n");
3142 
3143 				/* Let the remaining IOs to complete */
3144 				msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO,
3145 				      "mrsas_reset_targets", 5 * hz);
3146 
3147 				/* Try to reset the target device */
3148 				if (mrsas_reset_targets(sc) == FAIL)
3149 					tm_target_reset_failed = 1;
3150 			}
3151 
3152 			/* If this is a DCMD timeout or FW fault,
3153 			 * then go for controller reset
3154 			 */
3155 			if (fw_state == MFI_STATE_FAULT || tm_target_reset_failed ||
3156 			    (sc->do_timedout_reset == MFI_DCMD_TIMEOUT_OCR)) {
3157 				if (tm_target_reset_failed)
3158 					device_printf(sc->mrsas_dev, "Initiaiting OCR because of "
3159 					    "TM FAILURE!\n");
3160 				else
3161 					device_printf(sc->mrsas_dev, "Initiaiting OCR "
3162 						"because of %s!\n", sc->do_timedout_reset ?
3163 						"DCMD IO Timeout" : "FW fault");
3164 
3165 				mtx_lock_spin(&sc->ioctl_lock);
3166 				sc->reset_in_progress = 1;
3167 				mtx_unlock_spin(&sc->ioctl_lock);
3168 				sc->reset_count++;
3169 
3170 				/*
3171 				 * Wait for the AEN task to be completed if it is running.
3172 				 */
3173 				mtx_unlock(&sc->sim_lock);
3174 				taskqueue_drain(sc->ev_tq, &sc->ev_task);
3175 				mtx_lock(&sc->sim_lock);
3176 
3177 				taskqueue_block(sc->ev_tq);
3178 				/* Try to reset the controller */
3179 				mrsas_reset_ctrl(sc, sc->do_timedout_reset);
3180 
3181 				sc->do_timedout_reset = 0;
3182 				sc->reset_in_progress = 0;
3183 				tm_target_reset_failed = 0;
3184 				mrsas_atomic_set(&sc->target_reset_outstanding, 0);
3185 				memset(sc->target_reset_pool, 0,
3186 				    sizeof(sc->target_reset_pool));
3187 				taskqueue_unblock(sc->ev_tq);
3188 			}
3189 
3190 			/* Now allow IOs to come to the SIM */
3191 			 mrsas_xpt_release(sc);
3192 		}
3193 	}
3194 	mtx_unlock(&sc->sim_lock);
3195 	sc->ocr_thread_active = 0;
3196 	mrsas_kproc_exit(0);
3197 }
3198 
3199 /*
3200  * mrsas_reset_reply_desc:	Reset Reply descriptor as part of OCR.
3201  * input:					Adapter Context.
3202  *
3203  * This function will clear reply descriptor so that post OCR driver and FW will
3204  * lost old history.
3205  */
3206 void
3207 mrsas_reset_reply_desc(struct mrsas_softc *sc)
3208 {
3209 	int i, count;
3210 	pMpi2ReplyDescriptorsUnion_t reply_desc;
3211 
3212 	count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
3213 	for (i = 0; i < count; i++)
3214 		sc->last_reply_idx[i] = 0;
3215 
3216 	reply_desc = sc->reply_desc_mem;
3217 	for (i = 0; i < sc->reply_q_depth; i++, reply_desc++) {
3218 		reply_desc->Words = MRSAS_ULONG_MAX;
3219 	}
3220 }
3221 
3222 /*
3223  * mrsas_reset_ctrl:	Core function to OCR/Kill adapter.
3224  * input:				Adapter Context.
3225  *
3226  * This function will run from thread context so that it can sleep. 1. Do not
3227  * handle OCR if FW is in HW critical error. 2. Wait for outstanding command
3228  * to complete for 180 seconds. 3. If #2 does not find any outstanding
3229  * command Controller is in working state, so skip OCR. Otherwise, do
3230  * OCR/kill Adapter based on flag disableOnlineCtrlReset. 4. Start of the
3231  * OCR, return all SCSI command back to CAM layer which has ccb_ptr. 5. Post
3232  * OCR, Re-fire Management command and move Controller to Operation state.
3233  */
3234 int
3235 mrsas_reset_ctrl(struct mrsas_softc *sc, u_int8_t reset_reason)
3236 {
3237 	int retval = SUCCESS, i, j, retry = 0;
3238 	u_int32_t host_diag, abs_state, status_reg, reset_adapter;
3239 	union ccb *ccb;
3240 	struct mrsas_mfi_cmd *mfi_cmd;
3241 	struct mrsas_mpt_cmd *mpt_cmd;
3242 	union mrsas_evt_class_locale class_locale;
3243 	MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc;
3244 
3245 	if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) {
3246 		device_printf(sc->mrsas_dev,
3247 		    "mrsas: Hardware critical error, returning FAIL.\n");
3248 		return FAIL;
3249 	}
3250 	mrsas_set_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags);
3251 	sc->adprecovery = MRSAS_ADPRESET_SM_INFAULT;
3252 	mrsas_disable_intr(sc);
3253 	msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "mrsas_ocr",
3254 	    sc->mrsas_fw_fault_check_delay * hz);
3255 
3256 	/* First try waiting for commands to complete */
3257 	if (mrsas_wait_for_outstanding(sc, reset_reason)) {
3258 		mrsas_dprint(sc, MRSAS_OCR,
3259 		    "resetting adapter from %s.\n",
3260 		    __func__);
3261 		/* Now return commands back to the CAM layer */
3262 		mtx_unlock(&sc->sim_lock);
3263 		for (i = 0; i < sc->max_fw_cmds; i++) {
3264 			mpt_cmd = sc->mpt_cmd_list[i];
3265 
3266 			if (mpt_cmd->peer_cmd) {
3267 				mrsas_dprint(sc, MRSAS_OCR,
3268 				    "R1 FP command [%d] - (mpt_cmd) %p, (peer_cmd) %p\n",
3269 				    i, mpt_cmd, mpt_cmd->peer_cmd);
3270 			}
3271 
3272 			if (mpt_cmd->ccb_ptr) {
3273 				if (mpt_cmd->callout_owner) {
3274 					ccb = (union ccb *)(mpt_cmd->ccb_ptr);
3275 					ccb->ccb_h.status = CAM_SCSI_BUS_RESET;
3276 					mrsas_cmd_done(sc, mpt_cmd);
3277 				} else {
3278 					mpt_cmd->ccb_ptr = NULL;
3279 					mrsas_release_mpt_cmd(mpt_cmd);
3280 				}
3281 			}
3282 		}
3283 
3284 		mrsas_atomic_set(&sc->fw_outstanding, 0);
3285 
3286 		mtx_lock(&sc->sim_lock);
3287 
3288 		status_reg = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3289 		    outbound_scratch_pad));
3290 		abs_state = status_reg & MFI_STATE_MASK;
3291 		reset_adapter = status_reg & MFI_RESET_ADAPTER;
3292 		if (sc->disableOnlineCtrlReset ||
3293 		    (abs_state == MFI_STATE_FAULT && !reset_adapter)) {
3294 			/* Reset not supported, kill adapter */
3295 			mrsas_dprint(sc, MRSAS_OCR, "Reset not supported, killing adapter.\n");
3296 			mrsas_kill_hba(sc);
3297 			retval = FAIL;
3298 			goto out;
3299 		}
3300 		/* Now try to reset the chip */
3301 		for (i = 0; i < MRSAS_FUSION_MAX_RESET_TRIES; i++) {
3302 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3303 			    MPI2_WRSEQ_FLUSH_KEY_VALUE);
3304 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3305 			    MPI2_WRSEQ_1ST_KEY_VALUE);
3306 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3307 			    MPI2_WRSEQ_2ND_KEY_VALUE);
3308 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3309 			    MPI2_WRSEQ_3RD_KEY_VALUE);
3310 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3311 			    MPI2_WRSEQ_4TH_KEY_VALUE);
3312 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3313 			    MPI2_WRSEQ_5TH_KEY_VALUE);
3314 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset),
3315 			    MPI2_WRSEQ_6TH_KEY_VALUE);
3316 
3317 			/* Check that the diag write enable (DRWE) bit is on */
3318 			host_diag = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3319 			    fusion_host_diag));
3320 			retry = 0;
3321 			while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
3322 				DELAY(100 * 1000);
3323 				host_diag = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3324 				    fusion_host_diag));
3325 				if (retry++ == 100) {
3326 					mrsas_dprint(sc, MRSAS_OCR,
3327 					    "Host diag unlock failed!\n");
3328 					break;
3329 				}
3330 			}
3331 			if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
3332 				continue;
3333 
3334 			/* Send chip reset command */
3335 			mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag),
3336 			    host_diag | HOST_DIAG_RESET_ADAPTER);
3337 			DELAY(3000 * 1000);
3338 
3339 			/* Make sure reset adapter bit is cleared */
3340 			host_diag = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3341 			    fusion_host_diag));
3342 			retry = 0;
3343 			while (host_diag & HOST_DIAG_RESET_ADAPTER) {
3344 				DELAY(100 * 1000);
3345 				host_diag = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3346 				    fusion_host_diag));
3347 				if (retry++ == 1000) {
3348 					mrsas_dprint(sc, MRSAS_OCR,
3349 					    "Diag reset adapter never cleared!\n");
3350 					break;
3351 				}
3352 			}
3353 			if (host_diag & HOST_DIAG_RESET_ADAPTER)
3354 				continue;
3355 
3356 			abs_state = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3357 			    outbound_scratch_pad)) & MFI_STATE_MASK;
3358 			retry = 0;
3359 
3360 			while ((abs_state <= MFI_STATE_FW_INIT) && (retry++ < 1000)) {
3361 				DELAY(100 * 1000);
3362 				abs_state = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3363 				    outbound_scratch_pad)) & MFI_STATE_MASK;
3364 			}
3365 			if (abs_state <= MFI_STATE_FW_INIT) {
3366 				mrsas_dprint(sc, MRSAS_OCR, "firmware state < MFI_STATE_FW_INIT,"
3367 				    " state = 0x%x\n", abs_state);
3368 				continue;
3369 			}
3370 			/* Wait for FW to become ready */
3371 			if (mrsas_transition_to_ready(sc, 1)) {
3372 				mrsas_dprint(sc, MRSAS_OCR,
3373 				    "mrsas: Failed to transition controller to ready.\n");
3374 				continue;
3375 			}
3376 			mrsas_reset_reply_desc(sc);
3377 			if (mrsas_ioc_init(sc)) {
3378 				mrsas_dprint(sc, MRSAS_OCR, "mrsas_ioc_init() failed!\n");
3379 				continue;
3380 			}
3381 			for (j = 0; j < sc->max_fw_cmds; j++) {
3382 				mpt_cmd = sc->mpt_cmd_list[j];
3383 				if (mpt_cmd->sync_cmd_idx != (u_int32_t)MRSAS_ULONG_MAX) {
3384 					mfi_cmd = sc->mfi_cmd_list[mpt_cmd->sync_cmd_idx];
3385 					/* If not an IOCTL then release the command else re-fire */
3386 					if (!mfi_cmd->sync_cmd) {
3387 						mrsas_release_mfi_cmd(mfi_cmd);
3388 					} else {
3389 						req_desc = mrsas_get_request_desc(sc,
3390 						    mfi_cmd->cmd_id.context.smid - 1);
3391 						mrsas_dprint(sc, MRSAS_OCR,
3392 						    "Re-fire command DCMD opcode 0x%x index %d\n ",
3393 						    mfi_cmd->frame->dcmd.opcode, j);
3394 						if (!req_desc)
3395 							device_printf(sc->mrsas_dev,
3396 							    "Cannot build MPT cmd.\n");
3397 						else
3398 							mrsas_fire_cmd(sc, req_desc->addr.u.low,
3399 							    req_desc->addr.u.high);
3400 					}
3401 				}
3402 			}
3403 
3404 			/* Reset load balance info */
3405 			memset(sc->load_balance_info, 0,
3406 			    sizeof(LD_LOAD_BALANCE_INFO) * MAX_LOGICAL_DRIVES_EXT);
3407 
3408 			if (mrsas_get_ctrl_info(sc)) {
3409 				mrsas_kill_hba(sc);
3410 				retval = FAIL;
3411 				goto out;
3412 			}
3413 			if (!mrsas_get_map_info(sc))
3414 				mrsas_sync_map_info(sc);
3415 
3416 			megasas_setup_jbod_map(sc);
3417 
3418 			if ((sc->is_ventura || sc->is_aero) && sc->streamDetectByLD) {
3419 				for (j = 0; j < MAX_LOGICAL_DRIVES_EXT; ++j) {
3420 					memset(sc->streamDetectByLD[i], 0, sizeof(LD_STREAM_DETECT));
3421 					sc->streamDetectByLD[i]->mruBitMap = MR_STREAM_BITMAP;
3422 				}
3423 			}
3424 
3425 			mrsas_clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags);
3426 			mrsas_enable_intr(sc);
3427 			sc->adprecovery = MRSAS_HBA_OPERATIONAL;
3428 
3429 			/* Register AEN with FW for last sequence number */
3430 			class_locale.members.reserved = 0;
3431 			class_locale.members.locale = MR_EVT_LOCALE_ALL;
3432 			class_locale.members.class = MR_EVT_CLASS_DEBUG;
3433 
3434 			mtx_unlock(&sc->sim_lock);
3435 			if (mrsas_register_aen(sc, sc->last_seq_num,
3436 			    class_locale.word)) {
3437 				device_printf(sc->mrsas_dev,
3438 				    "ERROR: AEN registration FAILED from OCR !!! "
3439 				    "Further events from the controller cannot be notified."
3440 				    "Either there is some problem in the controller"
3441 				    "or the controller does not support AEN.\n"
3442 				    "Please contact to the SUPPORT TEAM if the problem persists\n");
3443 			}
3444 			mtx_lock(&sc->sim_lock);
3445 
3446 			/* Adapter reset completed successfully */
3447 			device_printf(sc->mrsas_dev, "Reset successful\n");
3448 			retval = SUCCESS;
3449 			goto out;
3450 		}
3451 		/* Reset failed, kill the adapter */
3452 		device_printf(sc->mrsas_dev, "Reset failed, killing adapter.\n");
3453 		mrsas_kill_hba(sc);
3454 		retval = FAIL;
3455 	} else {
3456 		mrsas_clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags);
3457 		mrsas_enable_intr(sc);
3458 		sc->adprecovery = MRSAS_HBA_OPERATIONAL;
3459 	}
3460 out:
3461 	mrsas_clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags);
3462 	mrsas_dprint(sc, MRSAS_OCR,
3463 	    "Reset Exit with %d.\n", retval);
3464 	return retval;
3465 }
3466 
3467 /*
3468  * mrsas_kill_hba:	Kill HBA when OCR is not supported
3469  * input:			Adapter Context.
3470  *
3471  * This function will kill HBA when OCR is not supported.
3472  */
3473 void
3474 mrsas_kill_hba(struct mrsas_softc *sc)
3475 {
3476 	sc->adprecovery = MRSAS_HW_CRITICAL_ERROR;
3477 	DELAY(1000 * 1000);
3478 	mrsas_dprint(sc, MRSAS_OCR, "%s\n", __func__);
3479 	mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell),
3480 	    MFI_STOP_ADP);
3481 	/* Flush */
3482 	mrsas_read_reg(sc, offsetof(mrsas_reg_set, doorbell));
3483 	mrsas_complete_outstanding_ioctls(sc);
3484 }
3485 
3486 /**
3487  * mrsas_complete_outstanding_ioctls	Complete pending IOCTLS after kill_hba
3488  * input:			Controller softc
3489  *
3490  * Returns void
3491  */
3492 void
3493 mrsas_complete_outstanding_ioctls(struct mrsas_softc *sc)
3494 {
3495 	int i;
3496 	struct mrsas_mpt_cmd *cmd_mpt;
3497 	struct mrsas_mfi_cmd *cmd_mfi;
3498 	u_int32_t count, MSIxIndex;
3499 
3500 	count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
3501 	for (i = 0; i < sc->max_fw_cmds; i++) {
3502 		cmd_mpt = sc->mpt_cmd_list[i];
3503 
3504 		if (cmd_mpt->sync_cmd_idx != (u_int32_t)MRSAS_ULONG_MAX) {
3505 			cmd_mfi = sc->mfi_cmd_list[cmd_mpt->sync_cmd_idx];
3506 			if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT) {
3507 				for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++)
3508 					mrsas_complete_mptmfi_passthru(sc, cmd_mfi,
3509 					    cmd_mpt->io_request->RaidContext.raid_context.status);
3510 			}
3511 		}
3512 	}
3513 }
3514 
3515 /*
3516  * mrsas_wait_for_outstanding:	Wait for outstanding commands
3517  * input:						Adapter Context.
3518  *
3519  * This function will wait for 180 seconds for outstanding commands to be
3520  * completed.
3521  */
3522 int
3523 mrsas_wait_for_outstanding(struct mrsas_softc *sc, u_int8_t check_reason)
3524 {
3525 	int i, outstanding, retval = 0;
3526 	u_int32_t fw_state, count, MSIxIndex;
3527 
3528 
3529 	for (i = 0; i < MRSAS_RESET_WAIT_TIME; i++) {
3530 		if (sc->remove_in_progress) {
3531 			mrsas_dprint(sc, MRSAS_OCR,
3532 			    "Driver remove or shutdown called.\n");
3533 			retval = 1;
3534 			goto out;
3535 		}
3536 		/* Check if firmware is in fault state */
3537 		fw_state = mrsas_read_reg_with_retries(sc, offsetof(mrsas_reg_set,
3538 		    outbound_scratch_pad)) & MFI_STATE_MASK;
3539 		if (fw_state == MFI_STATE_FAULT) {
3540 			mrsas_dprint(sc, MRSAS_OCR,
3541 			    "Found FW in FAULT state, will reset adapter.\n");
3542 			count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
3543 			mtx_unlock(&sc->sim_lock);
3544 			for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++)
3545 				mrsas_complete_cmd(sc, MSIxIndex);
3546 			mtx_lock(&sc->sim_lock);
3547 			retval = 1;
3548 			goto out;
3549 		}
3550 		if (check_reason == MFI_DCMD_TIMEOUT_OCR) {
3551 			mrsas_dprint(sc, MRSAS_OCR,
3552 			    "DCMD IO TIMEOUT detected, will reset adapter.\n");
3553 			retval = 1;
3554 			goto out;
3555 		}
3556 		outstanding = mrsas_atomic_read(&sc->fw_outstanding);
3557 		if (!outstanding)
3558 			goto out;
3559 
3560 		if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) {
3561 			mrsas_dprint(sc, MRSAS_OCR, "[%2d]waiting for %d "
3562 			    "commands to complete\n", i, outstanding);
3563 			count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
3564 			mtx_unlock(&sc->sim_lock);
3565 			for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++)
3566 				mrsas_complete_cmd(sc, MSIxIndex);
3567 			mtx_lock(&sc->sim_lock);
3568 		}
3569 		DELAY(1000 * 1000);
3570 	}
3571 
3572 	if (mrsas_atomic_read(&sc->fw_outstanding)) {
3573 		mrsas_dprint(sc, MRSAS_OCR,
3574 		    " pending commands remain after waiting,"
3575 		    " will reset adapter.\n");
3576 		retval = 1;
3577 	}
3578 out:
3579 	return retval;
3580 }
3581 
3582 /*
3583  * mrsas_release_mfi_cmd:	Return a cmd to free command pool
3584  * input:					Command packet for return to free cmd pool
3585  *
3586  * This function returns the MFI & MPT command to the command list.
3587  */
3588 void
3589 mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd_mfi)
3590 {
3591 	struct mrsas_softc *sc = cmd_mfi->sc;
3592 	struct mrsas_mpt_cmd *cmd_mpt;
3593 
3594 
3595 	mtx_lock(&sc->mfi_cmd_pool_lock);
3596 	/*
3597 	 * Release the mpt command (if at all it is allocated
3598 	 * associated with the mfi command
3599 	 */
3600 	if (cmd_mfi->cmd_id.context.smid) {
3601 		mtx_lock(&sc->mpt_cmd_pool_lock);
3602 		/* Get the mpt cmd from mfi cmd frame's smid value */
3603 		cmd_mpt = sc->mpt_cmd_list[cmd_mfi->cmd_id.context.smid-1];
3604 		cmd_mpt->flags = 0;
3605 		cmd_mpt->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX;
3606 		TAILQ_INSERT_HEAD(&(sc->mrsas_mpt_cmd_list_head), cmd_mpt, next);
3607 		mtx_unlock(&sc->mpt_cmd_pool_lock);
3608 	}
3609 	/* Release the mfi command */
3610 	cmd_mfi->ccb_ptr = NULL;
3611 	cmd_mfi->cmd_id.frame_count = 0;
3612 	TAILQ_INSERT_HEAD(&(sc->mrsas_mfi_cmd_list_head), cmd_mfi, next);
3613 	mtx_unlock(&sc->mfi_cmd_pool_lock);
3614 
3615 	return;
3616 }
3617 
3618 /*
3619  * mrsas_get_controller_info:	Returns FW's controller structure
3620  * input:						Adapter soft state
3621  * 								Controller information structure
3622  *
3623  * Issues an internal command (DCMD) to get the FW's controller structure. This
3624  * information is mainly used to find out the maximum IO transfer per command
3625  * supported by the FW.
3626  */
3627 static int
3628 mrsas_get_ctrl_info(struct mrsas_softc *sc)
3629 {
3630 	int retcode = 0;
3631 	u_int8_t do_ocr = 1;
3632 	struct mrsas_mfi_cmd *cmd;
3633 	struct mrsas_dcmd_frame *dcmd;
3634 
3635 	cmd = mrsas_get_mfi_cmd(sc);
3636 
3637 	if (!cmd) {
3638 		device_printf(sc->mrsas_dev, "Failed to get a free cmd\n");
3639 		return -ENOMEM;
3640 	}
3641 	dcmd = &cmd->frame->dcmd;
3642 
3643 	if (mrsas_alloc_ctlr_info_cmd(sc) != SUCCESS) {
3644 		device_printf(sc->mrsas_dev, "Cannot allocate get ctlr info cmd\n");
3645 		mrsas_release_mfi_cmd(cmd);
3646 		return -ENOMEM;
3647 	}
3648 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
3649 
3650 	dcmd->cmd = MFI_CMD_DCMD;
3651 	dcmd->cmd_status = 0xFF;
3652 	dcmd->sge_count = 1;
3653 	dcmd->flags = MFI_FRAME_DIR_READ;
3654 	dcmd->timeout = 0;
3655 	dcmd->pad_0 = 0;
3656 	dcmd->data_xfer_len = sizeof(struct mrsas_ctrl_info);
3657 	dcmd->opcode = MR_DCMD_CTRL_GET_INFO;
3658 	dcmd->sgl.sge32[0].phys_addr = sc->ctlr_info_phys_addr;
3659 	dcmd->sgl.sge32[0].length = sizeof(struct mrsas_ctrl_info);
3660 
3661 	if (!sc->mask_interrupts)
3662 		retcode = mrsas_issue_blocked_cmd(sc, cmd);
3663 	else
3664 		retcode = mrsas_issue_polled(sc, cmd);
3665 
3666 	if (retcode == ETIMEDOUT)
3667 		goto dcmd_timeout;
3668 	else
3669 		memcpy(sc->ctrl_info, sc->ctlr_info_mem, sizeof(struct mrsas_ctrl_info));
3670 
3671 	do_ocr = 0;
3672 	mrsas_update_ext_vd_details(sc);
3673 
3674 	sc->use_seqnum_jbod_fp =
3675 	    sc->ctrl_info->adapterOperations3.useSeqNumJbodFP;
3676 	sc->support_morethan256jbod =
3677 		sc->ctrl_info->adapterOperations4.supportPdMapTargetId;
3678 
3679 	sc->disableOnlineCtrlReset =
3680 	    sc->ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
3681 
3682 dcmd_timeout:
3683 	mrsas_free_ctlr_info_cmd(sc);
3684 
3685 	if (do_ocr)
3686 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
3687 
3688 	if (!sc->mask_interrupts)
3689 		mrsas_release_mfi_cmd(cmd);
3690 
3691 	return (retcode);
3692 }
3693 
3694 /*
3695  * mrsas_update_ext_vd_details : Update details w.r.t Extended VD
3696  * input:
3697  *	sc - Controller's softc
3698 */
3699 static void
3700 mrsas_update_ext_vd_details(struct mrsas_softc *sc)
3701 {
3702 	u_int32_t ventura_map_sz = 0;
3703 	sc->max256vdSupport =
3704 		sc->ctrl_info->adapterOperations3.supportMaxExtLDs;
3705 
3706 	/* Below is additional check to address future FW enhancement */
3707 	if (sc->ctrl_info->max_lds > 64)
3708 		sc->max256vdSupport = 1;
3709 
3710 	sc->drv_supported_vd_count = MRSAS_MAX_LD_CHANNELS
3711 	    * MRSAS_MAX_DEV_PER_CHANNEL;
3712 	sc->drv_supported_pd_count = MRSAS_MAX_PD_CHANNELS
3713 	    * MRSAS_MAX_DEV_PER_CHANNEL;
3714 	if (sc->max256vdSupport) {
3715 		sc->fw_supported_vd_count = MAX_LOGICAL_DRIVES_EXT;
3716 		sc->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
3717 	} else {
3718 		sc->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
3719 		sc->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
3720 	}
3721 
3722 	if (sc->maxRaidMapSize) {
3723 		ventura_map_sz = sc->maxRaidMapSize *
3724 		    MR_MIN_MAP_SIZE;
3725 		sc->current_map_sz = ventura_map_sz;
3726 		sc->max_map_sz = ventura_map_sz;
3727 	} else {
3728 		sc->old_map_sz = sizeof(MR_FW_RAID_MAP) +
3729 		    (sizeof(MR_LD_SPAN_MAP) * (sc->fw_supported_vd_count - 1));
3730 		sc->new_map_sz = sizeof(MR_FW_RAID_MAP_EXT);
3731 		sc->max_map_sz = max(sc->old_map_sz, sc->new_map_sz);
3732 		if (sc->max256vdSupport)
3733 			sc->current_map_sz = sc->new_map_sz;
3734 		else
3735 			sc->current_map_sz = sc->old_map_sz;
3736 	}
3737 
3738 	sc->drv_map_sz = sizeof(MR_DRV_RAID_MAP_ALL);
3739 #if VD_EXT_DEBUG
3740 	device_printf(sc->mrsas_dev, "sc->maxRaidMapSize 0x%x \n",
3741 	    sc->maxRaidMapSize);
3742 	device_printf(sc->mrsas_dev,
3743 	    "new_map_sz = 0x%x, old_map_sz = 0x%x, "
3744 	    "ventura_map_sz = 0x%x, current_map_sz = 0x%x "
3745 	    "fusion->drv_map_sz =0x%x, size of driver raid map 0x%lx \n",
3746 	    sc->new_map_sz, sc->old_map_sz, ventura_map_sz,
3747 	    sc->current_map_sz, sc->drv_map_sz, sizeof(MR_DRV_RAID_MAP_ALL));
3748 #endif
3749 }
3750 
3751 /*
3752  * mrsas_alloc_ctlr_info_cmd:	Allocates memory for controller info command
3753  * input:						Adapter soft state
3754  *
3755  * Allocates DMAable memory for the controller info internal command.
3756  */
3757 int
3758 mrsas_alloc_ctlr_info_cmd(struct mrsas_softc *sc)
3759 {
3760 	int ctlr_info_size;
3761 
3762 	/* Allocate get controller info command */
3763 	ctlr_info_size = sizeof(struct mrsas_ctrl_info);
3764 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
3765 	    1, 0,
3766 	    BUS_SPACE_MAXADDR_32BIT,
3767 	    BUS_SPACE_MAXADDR,
3768 	    NULL, NULL,
3769 	    ctlr_info_size,
3770 	    1,
3771 	    ctlr_info_size,
3772 	    BUS_DMA_ALLOCNOW,
3773 	    NULL, NULL,
3774 	    &sc->ctlr_info_tag)) {
3775 		device_printf(sc->mrsas_dev, "Cannot allocate ctlr info tag\n");
3776 		return (ENOMEM);
3777 	}
3778 	if (bus_dmamem_alloc(sc->ctlr_info_tag, (void **)&sc->ctlr_info_mem,
3779 	    BUS_DMA_NOWAIT, &sc->ctlr_info_dmamap)) {
3780 		device_printf(sc->mrsas_dev, "Cannot allocate ctlr info cmd mem\n");
3781 		return (ENOMEM);
3782 	}
3783 	if (bus_dmamap_load(sc->ctlr_info_tag, sc->ctlr_info_dmamap,
3784 	    sc->ctlr_info_mem, ctlr_info_size, mrsas_addr_cb,
3785 	    &sc->ctlr_info_phys_addr, BUS_DMA_NOWAIT)) {
3786 		device_printf(sc->mrsas_dev, "Cannot load ctlr info cmd mem\n");
3787 		return (ENOMEM);
3788 	}
3789 	memset(sc->ctlr_info_mem, 0, ctlr_info_size);
3790 	return (0);
3791 }
3792 
3793 /*
3794  * mrsas_free_ctlr_info_cmd:	Free memory for controller info command
3795  * input:						Adapter soft state
3796  *
3797  * Deallocates memory of the get controller info cmd.
3798  */
3799 void
3800 mrsas_free_ctlr_info_cmd(struct mrsas_softc *sc)
3801 {
3802 	if (sc->ctlr_info_phys_addr)
3803 		bus_dmamap_unload(sc->ctlr_info_tag, sc->ctlr_info_dmamap);
3804 	if (sc->ctlr_info_mem != NULL)
3805 		bus_dmamem_free(sc->ctlr_info_tag, sc->ctlr_info_mem, sc->ctlr_info_dmamap);
3806 	if (sc->ctlr_info_tag != NULL)
3807 		bus_dma_tag_destroy(sc->ctlr_info_tag);
3808 }
3809 
3810 /*
3811  * mrsas_issue_polled:	Issues a polling command
3812  * inputs:				Adapter soft state
3813  * 						Command packet to be issued
3814  *
3815  * This function is for posting of internal commands to Firmware.  MFI requires
3816  * the cmd_status to be set to 0xFF before posting.  The maximun wait time of
3817  * the poll response timer is 180 seconds.
3818  */
3819 int
3820 mrsas_issue_polled(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
3821 {
3822 	struct mrsas_header *frame_hdr = &cmd->frame->hdr;
3823 	u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME;
3824 	int i, retcode = SUCCESS;
3825 
3826 	frame_hdr->cmd_status = 0xFF;
3827 	frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
3828 
3829 	/* Issue the frame using inbound queue port */
3830 	if (mrsas_issue_dcmd(sc, cmd)) {
3831 		device_printf(sc->mrsas_dev, "Cannot issue DCMD internal command.\n");
3832 		return (1);
3833 	}
3834 	/*
3835 	 * Poll response timer to wait for Firmware response.  While this
3836 	 * timer with the DELAY call could block CPU, the time interval for
3837 	 * this is only 1 millisecond.
3838 	 */
3839 	if (frame_hdr->cmd_status == 0xFF) {
3840 		for (i = 0; i < (max_wait * 1000); i++) {
3841 			if (frame_hdr->cmd_status == 0xFF)
3842 				DELAY(1000);
3843 			else
3844 				break;
3845 		}
3846 	}
3847 	if (frame_hdr->cmd_status == 0xFF) {
3848 		device_printf(sc->mrsas_dev, "DCMD timed out after %d "
3849 		    "seconds from %s\n", max_wait, __func__);
3850 		device_printf(sc->mrsas_dev, "DCMD opcode 0x%X\n",
3851 		    cmd->frame->dcmd.opcode);
3852 		retcode = ETIMEDOUT;
3853 	}
3854 	return (retcode);
3855 }
3856 
3857 /*
3858  * mrsas_issue_dcmd:	Issues a MFI Pass thru cmd
3859  * input:				Adapter soft state mfi cmd pointer
3860  *
3861  * This function is called by mrsas_issued_blocked_cmd() and
3862  * mrsas_issued_polled(), to build the MPT command and then fire the command
3863  * to Firmware.
3864  */
3865 int
3866 mrsas_issue_dcmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
3867 {
3868 	MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc;
3869 
3870 	req_desc = mrsas_build_mpt_cmd(sc, cmd);
3871 	if (!req_desc) {
3872 		device_printf(sc->mrsas_dev, "Cannot build MPT cmd.\n");
3873 		return (1);
3874 	}
3875 	mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high);
3876 
3877 	return (0);
3878 }
3879 
3880 /*
3881  * mrsas_build_mpt_cmd:	Calls helper function to build Passthru cmd
3882  * input:				Adapter soft state mfi cmd to build
3883  *
3884  * This function is called by mrsas_issue_cmd() to build the MPT-MFI passthru
3885  * command and prepares the MPT command to send to Firmware.
3886  */
3887 MRSAS_REQUEST_DESCRIPTOR_UNION *
3888 mrsas_build_mpt_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
3889 {
3890 	MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc;
3891 	u_int16_t index;
3892 
3893 	if (mrsas_build_mptmfi_passthru(sc, cmd)) {
3894 		device_printf(sc->mrsas_dev, "Cannot build MPT-MFI passthru cmd.\n");
3895 		return NULL;
3896 	}
3897 	index = cmd->cmd_id.context.smid;
3898 
3899 	req_desc = mrsas_get_request_desc(sc, index - 1);
3900 	if (!req_desc)
3901 		return NULL;
3902 
3903 	req_desc->addr.Words = 0;
3904 	req_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
3905 
3906 	req_desc->SCSIIO.SMID = index;
3907 
3908 	return (req_desc);
3909 }
3910 
3911 /*
3912  * mrsas_build_mptmfi_passthru:	Builds a MPT MFI Passthru command
3913  * input:						Adapter soft state mfi cmd pointer
3914  *
3915  * The MPT command and the io_request are setup as a passthru command. The SGE
3916  * chain address is set to frame_phys_addr of the MFI command.
3917  */
3918 u_int8_t
3919 mrsas_build_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *mfi_cmd)
3920 {
3921 	MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain;
3922 	PTR_MRSAS_RAID_SCSI_IO_REQUEST io_req;
3923 	struct mrsas_mpt_cmd *mpt_cmd;
3924 	struct mrsas_header *frame_hdr = &mfi_cmd->frame->hdr;
3925 
3926 	mpt_cmd = mrsas_get_mpt_cmd(sc);
3927 	if (!mpt_cmd)
3928 		return (1);
3929 
3930 	/* Save the smid. To be used for returning the cmd */
3931 	mfi_cmd->cmd_id.context.smid = mpt_cmd->index;
3932 
3933 	mpt_cmd->sync_cmd_idx = mfi_cmd->index;
3934 
3935 	/*
3936 	 * For cmds where the flag is set, store the flag and check on
3937 	 * completion. For cmds with this flag, don't call
3938 	 * mrsas_complete_cmd.
3939 	 */
3940 
3941 	if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE)
3942 		mpt_cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
3943 
3944 	io_req = mpt_cmd->io_request;
3945 
3946 	if (sc->mrsas_gen3_ctrl || sc->is_ventura || sc->is_aero) {
3947 		pMpi25IeeeSgeChain64_t sgl_ptr_end = (pMpi25IeeeSgeChain64_t)&io_req->SGL;
3948 
3949 		sgl_ptr_end += sc->max_sge_in_main_msg - 1;
3950 		sgl_ptr_end->Flags = 0;
3951 	}
3952 	mpi25_ieee_chain = (MPI25_IEEE_SGE_CHAIN64 *) & io_req->SGL.IeeeChain;
3953 
3954 	io_req->Function = MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST;
3955 	io_req->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 4;
3956 	io_req->ChainOffset = sc->chain_offset_mfi_pthru;
3957 
3958 	mpi25_ieee_chain->Address = mfi_cmd->frame_phys_addr;
3959 
3960 	mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
3961 	    MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
3962 
3963 	mpi25_ieee_chain->Length = sc->max_chain_frame_sz;
3964 
3965 	return (0);
3966 }
3967 
3968 /*
3969  * mrsas_issue_blocked_cmd:	Synchronous wrapper around regular FW cmds
3970  * input:					Adapter soft state Command to be issued
3971  *
3972  * This function waits on an event for the command to be returned from the ISR.
3973  * Max wait time is MRSAS_INTERNAL_CMD_WAIT_TIME secs. Used for issuing
3974  * internal and ioctl commands.
3975  */
3976 int
3977 mrsas_issue_blocked_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
3978 {
3979 	u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME;
3980 	unsigned long total_time = 0;
3981 	int retcode = SUCCESS;
3982 
3983 	/* Initialize cmd_status */
3984 	cmd->cmd_status = 0xFF;
3985 
3986 	/* Build MPT-MFI command for issue to FW */
3987 	if (mrsas_issue_dcmd(sc, cmd)) {
3988 		device_printf(sc->mrsas_dev, "Cannot issue DCMD internal command.\n");
3989 		return (1);
3990 	}
3991 	sc->chan = (void *)&cmd;
3992 
3993 	while (1) {
3994 		if (cmd->cmd_status == 0xFF) {
3995 			tsleep((void *)&sc->chan, 0, "mrsas_sleep", hz);
3996 		} else
3997 			break;
3998 
3999 		if (!cmd->sync_cmd) {	/* cmd->sync will be set for an IOCTL
4000 					 * command */
4001 			total_time++;
4002 			if (total_time >= max_wait) {
4003 				device_printf(sc->mrsas_dev,
4004 				    "Internal command timed out after %d seconds.\n", max_wait);
4005 				retcode = 1;
4006 				break;
4007 			}
4008 		}
4009 	}
4010 
4011 	if (cmd->cmd_status == 0xFF) {
4012 		device_printf(sc->mrsas_dev, "DCMD timed out after %d "
4013 		    "seconds from %s\n", max_wait, __func__);
4014 		device_printf(sc->mrsas_dev, "DCMD opcode 0x%X\n",
4015 		    cmd->frame->dcmd.opcode);
4016 		retcode = ETIMEDOUT;
4017 	}
4018 	return (retcode);
4019 }
4020 
4021 /*
4022  * mrsas_complete_mptmfi_passthru:	Completes a command
4023  * input:	@sc:					Adapter soft state
4024  * 			@cmd:					Command to be completed
4025  * 			@status:				cmd completion status
4026  *
4027  * This function is called from mrsas_complete_cmd() after an interrupt is
4028  * received from Firmware, and io_request->Function is
4029  * MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST.
4030  */
4031 void
4032 mrsas_complete_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd,
4033     u_int8_t status)
4034 {
4035 	struct mrsas_header *hdr = &cmd->frame->hdr;
4036 	u_int8_t cmd_status = cmd->frame->hdr.cmd_status;
4037 
4038 	/* Reset the retry counter for future re-tries */
4039 	cmd->retry_for_fw_reset = 0;
4040 
4041 	if (cmd->ccb_ptr)
4042 		cmd->ccb_ptr = NULL;
4043 
4044 	switch (hdr->cmd) {
4045 	case MFI_CMD_INVALID:
4046 		device_printf(sc->mrsas_dev, "MFI_CMD_INVALID command.\n");
4047 		break;
4048 	case MFI_CMD_PD_SCSI_IO:
4049 	case MFI_CMD_LD_SCSI_IO:
4050 		/*
4051 		 * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been
4052 		 * issued either through an IO path or an IOCTL path. If it
4053 		 * was via IOCTL, we will send it to internal completion.
4054 		 */
4055 		if (cmd->sync_cmd) {
4056 			cmd->sync_cmd = 0;
4057 			mrsas_wakeup(sc, cmd);
4058 			break;
4059 		}
4060 	case MFI_CMD_SMP:
4061 	case MFI_CMD_STP:
4062 	case MFI_CMD_DCMD:
4063 		/* Check for LD map update */
4064 		if ((cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) &&
4065 		    (cmd->frame->dcmd.mbox.b[1] == 1)) {
4066 			sc->fast_path_io = 0;
4067 			mtx_lock(&sc->raidmap_lock);
4068 			sc->map_update_cmd = NULL;
4069 			if (cmd_status != 0) {
4070 				if (cmd_status != MFI_STAT_NOT_FOUND)
4071 					device_printf(sc->mrsas_dev, "map sync failed, status=%x\n", cmd_status);
4072 				else {
4073 					mrsas_release_mfi_cmd(cmd);
4074 					mtx_unlock(&sc->raidmap_lock);
4075 					break;
4076 				}
4077 			} else
4078 				sc->map_id++;
4079 			mrsas_release_mfi_cmd(cmd);
4080 			if (MR_ValidateMapInfo(sc))
4081 				sc->fast_path_io = 0;
4082 			else
4083 				sc->fast_path_io = 1;
4084 			mrsas_sync_map_info(sc);
4085 			mtx_unlock(&sc->raidmap_lock);
4086 			break;
4087 		}
4088 		if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
4089 		    cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) {
4090 			sc->mrsas_aen_triggered = 0;
4091 		}
4092 		/* FW has an updated PD sequence */
4093 		if ((cmd->frame->dcmd.opcode ==
4094 		    MR_DCMD_SYSTEM_PD_MAP_GET_INFO) &&
4095 		    (cmd->frame->dcmd.mbox.b[0] == 1)) {
4096 
4097 			mtx_lock(&sc->raidmap_lock);
4098 			sc->jbod_seq_cmd = NULL;
4099 			mrsas_release_mfi_cmd(cmd);
4100 
4101 			if (cmd_status == MFI_STAT_OK) {
4102 				sc->pd_seq_map_id++;
4103 				/* Re-register a pd sync seq num cmd */
4104 				if (megasas_sync_pd_seq_num(sc, true))
4105 					sc->use_seqnum_jbod_fp = 0;
4106 			} else {
4107 				sc->use_seqnum_jbod_fp = 0;
4108 				device_printf(sc->mrsas_dev,
4109 				    "Jbod map sync failed, status=%x\n", cmd_status);
4110 			}
4111 			mtx_unlock(&sc->raidmap_lock);
4112 			break;
4113 		}
4114 		/* See if got an event notification */
4115 		if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT)
4116 			mrsas_complete_aen(sc, cmd);
4117 		else
4118 			mrsas_wakeup(sc, cmd);
4119 		break;
4120 	case MFI_CMD_ABORT:
4121 		/* Command issued to abort another cmd return */
4122 		mrsas_complete_abort(sc, cmd);
4123 		break;
4124 	default:
4125 		device_printf(sc->mrsas_dev, "Unknown command completed! [0x%X]\n", hdr->cmd);
4126 		break;
4127 	}
4128 }
4129 
4130 /*
4131  * mrsas_wakeup:	Completes an internal command
4132  * input:			Adapter soft state
4133  * 					Command to be completed
4134  *
4135  * In mrsas_issue_blocked_cmd(), after a command is issued to Firmware, a wait
4136  * timer is started.  This function is called from
4137  * mrsas_complete_mptmfi_passthru() as it completes the command, to wake up
4138  * from the command wait.
4139  */
4140 void
4141 mrsas_wakeup(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
4142 {
4143 	cmd->cmd_status = cmd->frame->io.cmd_status;
4144 
4145 	if (cmd->cmd_status == 0xFF)
4146 		cmd->cmd_status = 0;
4147 
4148 	sc->chan = (void *)&cmd;
4149 	wakeup_one((void *)&sc->chan);
4150 	return;
4151 }
4152 
4153 /*
4154  * mrsas_shutdown_ctlr:       Instructs FW to shutdown the controller input:
4155  * Adapter soft state Shutdown/Hibernate
4156  *
4157  * This function issues a DCMD internal command to Firmware to initiate shutdown
4158  * of the controller.
4159  */
4160 static void
4161 mrsas_shutdown_ctlr(struct mrsas_softc *sc, u_int32_t opcode)
4162 {
4163 	struct mrsas_mfi_cmd *cmd;
4164 	struct mrsas_dcmd_frame *dcmd;
4165 
4166 	if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)
4167 		return;
4168 
4169 	cmd = mrsas_get_mfi_cmd(sc);
4170 	if (!cmd) {
4171 		device_printf(sc->mrsas_dev, "Cannot allocate for shutdown cmd.\n");
4172 		return;
4173 	}
4174 	if (sc->aen_cmd)
4175 		mrsas_issue_blocked_abort_cmd(sc, sc->aen_cmd);
4176 	if (sc->map_update_cmd)
4177 		mrsas_issue_blocked_abort_cmd(sc, sc->map_update_cmd);
4178 	if (sc->jbod_seq_cmd)
4179 		mrsas_issue_blocked_abort_cmd(sc, sc->jbod_seq_cmd);
4180 
4181 	dcmd = &cmd->frame->dcmd;
4182 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4183 
4184 	dcmd->cmd = MFI_CMD_DCMD;
4185 	dcmd->cmd_status = 0x0;
4186 	dcmd->sge_count = 0;
4187 	dcmd->flags = MFI_FRAME_DIR_NONE;
4188 	dcmd->timeout = 0;
4189 	dcmd->pad_0 = 0;
4190 	dcmd->data_xfer_len = 0;
4191 	dcmd->opcode = opcode;
4192 
4193 	device_printf(sc->mrsas_dev, "Preparing to shut down controller.\n");
4194 
4195 	mrsas_issue_blocked_cmd(sc, cmd);
4196 	mrsas_release_mfi_cmd(cmd);
4197 
4198 	return;
4199 }
4200 
4201 /*
4202  * mrsas_flush_cache:         Requests FW to flush all its caches input:
4203  * Adapter soft state
4204  *
4205  * This function is issues a DCMD internal command to Firmware to initiate
4206  * flushing of all caches.
4207  */
4208 static void
4209 mrsas_flush_cache(struct mrsas_softc *sc)
4210 {
4211 	struct mrsas_mfi_cmd *cmd;
4212 	struct mrsas_dcmd_frame *dcmd;
4213 
4214 	if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)
4215 		return;
4216 
4217 	cmd = mrsas_get_mfi_cmd(sc);
4218 	if (!cmd) {
4219 		device_printf(sc->mrsas_dev, "Cannot allocate for flush cache cmd.\n");
4220 		return;
4221 	}
4222 	dcmd = &cmd->frame->dcmd;
4223 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4224 
4225 	dcmd->cmd = MFI_CMD_DCMD;
4226 	dcmd->cmd_status = 0x0;
4227 	dcmd->sge_count = 0;
4228 	dcmd->flags = MFI_FRAME_DIR_NONE;
4229 	dcmd->timeout = 0;
4230 	dcmd->pad_0 = 0;
4231 	dcmd->data_xfer_len = 0;
4232 	dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH;
4233 	dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
4234 
4235 	mrsas_issue_blocked_cmd(sc, cmd);
4236 	mrsas_release_mfi_cmd(cmd);
4237 
4238 	return;
4239 }
4240 
4241 int
4242 megasas_sync_pd_seq_num(struct mrsas_softc *sc, boolean_t pend)
4243 {
4244 	int retcode = 0;
4245 	u_int8_t do_ocr = 1;
4246 	struct mrsas_mfi_cmd *cmd;
4247 	struct mrsas_dcmd_frame *dcmd;
4248 	uint32_t pd_seq_map_sz;
4249 	struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
4250 	bus_addr_t pd_seq_h;
4251 
4252 	pd_seq_map_sz = sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) +
4253 	    (sizeof(struct MR_PD_CFG_SEQ) *
4254 	    (MAX_PHYSICAL_DEVICES - 1));
4255 
4256 	cmd = mrsas_get_mfi_cmd(sc);
4257 	if (!cmd) {
4258 		device_printf(sc->mrsas_dev,
4259 		    "Cannot alloc for ld map info cmd.\n");
4260 		return 1;
4261 	}
4262 	dcmd = &cmd->frame->dcmd;
4263 
4264 	pd_sync = (void *)sc->jbodmap_mem[(sc->pd_seq_map_id & 1)];
4265 	pd_seq_h = sc->jbodmap_phys_addr[(sc->pd_seq_map_id & 1)];
4266 	if (!pd_sync) {
4267 		device_printf(sc->mrsas_dev,
4268 		    "Failed to alloc mem for jbod map info.\n");
4269 		mrsas_release_mfi_cmd(cmd);
4270 		return (ENOMEM);
4271 	}
4272 	memset(pd_sync, 0, pd_seq_map_sz);
4273 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4274 	dcmd->cmd = MFI_CMD_DCMD;
4275 	dcmd->cmd_status = 0xFF;
4276 	dcmd->sge_count = 1;
4277 	dcmd->timeout = 0;
4278 	dcmd->pad_0 = 0;
4279 	dcmd->data_xfer_len = (pd_seq_map_sz);
4280 	dcmd->opcode = (MR_DCMD_SYSTEM_PD_MAP_GET_INFO);
4281 	dcmd->sgl.sge32[0].phys_addr = (pd_seq_h);
4282 	dcmd->sgl.sge32[0].length = (pd_seq_map_sz);
4283 
4284 	if (pend) {
4285 		dcmd->mbox.b[0] = MRSAS_DCMD_MBOX_PEND_FLAG;
4286 		dcmd->flags = (MFI_FRAME_DIR_WRITE);
4287 		sc->jbod_seq_cmd = cmd;
4288 		if (mrsas_issue_dcmd(sc, cmd)) {
4289 			device_printf(sc->mrsas_dev,
4290 			    "Fail to send sync map info command.\n");
4291 			return 1;
4292 		} else
4293 			return 0;
4294 	} else
4295 		dcmd->flags = MFI_FRAME_DIR_READ;
4296 
4297 	retcode = mrsas_issue_polled(sc, cmd);
4298 	if (retcode == ETIMEDOUT)
4299 		goto dcmd_timeout;
4300 
4301 	if (pd_sync->count > MAX_PHYSICAL_DEVICES) {
4302 		device_printf(sc->mrsas_dev,
4303 		    "driver supports max %d JBOD, but FW reports %d\n",
4304 		    MAX_PHYSICAL_DEVICES, pd_sync->count);
4305 		retcode = -EINVAL;
4306 	}
4307 	if (!retcode)
4308 		sc->pd_seq_map_id++;
4309 	do_ocr = 0;
4310 
4311 dcmd_timeout:
4312 	if (do_ocr)
4313 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
4314 
4315 	return (retcode);
4316 }
4317 
4318 /*
4319  * mrsas_get_map_info:        Load and validate RAID map input:
4320  * Adapter instance soft state
4321  *
4322  * This function calls mrsas_get_ld_map_info() and MR_ValidateMapInfo() to load
4323  * and validate RAID map.  It returns 0 if successful, 1 other- wise.
4324  */
4325 static int
4326 mrsas_get_map_info(struct mrsas_softc *sc)
4327 {
4328 	uint8_t retcode = 0;
4329 
4330 	sc->fast_path_io = 0;
4331 	if (!mrsas_get_ld_map_info(sc)) {
4332 		retcode = MR_ValidateMapInfo(sc);
4333 		if (retcode == 0) {
4334 			sc->fast_path_io = 1;
4335 			return 0;
4336 		}
4337 	}
4338 	return 1;
4339 }
4340 
4341 /*
4342  * mrsas_get_ld_map_info:      Get FW's ld_map structure input:
4343  * Adapter instance soft state
4344  *
4345  * Issues an internal command (DCMD) to get the FW's controller PD list
4346  * structure.
4347  */
4348 static int
4349 mrsas_get_ld_map_info(struct mrsas_softc *sc)
4350 {
4351 	int retcode = 0;
4352 	struct mrsas_mfi_cmd *cmd;
4353 	struct mrsas_dcmd_frame *dcmd;
4354 	void *map;
4355 	bus_addr_t map_phys_addr = 0;
4356 
4357 	cmd = mrsas_get_mfi_cmd(sc);
4358 	if (!cmd) {
4359 		device_printf(sc->mrsas_dev,
4360 		    "Cannot alloc for ld map info cmd.\n");
4361 		return 1;
4362 	}
4363 	dcmd = &cmd->frame->dcmd;
4364 
4365 	map = (void *)sc->raidmap_mem[(sc->map_id & 1)];
4366 	map_phys_addr = sc->raidmap_phys_addr[(sc->map_id & 1)];
4367 	if (!map) {
4368 		device_printf(sc->mrsas_dev,
4369 		    "Failed to alloc mem for ld map info.\n");
4370 		mrsas_release_mfi_cmd(cmd);
4371 		return (ENOMEM);
4372 	}
4373 	memset(map, 0, sizeof(sc->max_map_sz));
4374 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4375 
4376 	dcmd->cmd = MFI_CMD_DCMD;
4377 	dcmd->cmd_status = 0xFF;
4378 	dcmd->sge_count = 1;
4379 	dcmd->flags = MFI_FRAME_DIR_READ;
4380 	dcmd->timeout = 0;
4381 	dcmd->pad_0 = 0;
4382 	dcmd->data_xfer_len = sc->current_map_sz;
4383 	dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO;
4384 	dcmd->sgl.sge32[0].phys_addr = map_phys_addr;
4385 	dcmd->sgl.sge32[0].length = sc->current_map_sz;
4386 
4387 	retcode = mrsas_issue_polled(sc, cmd);
4388 	if (retcode == ETIMEDOUT)
4389 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
4390 
4391 	return (retcode);
4392 }
4393 
4394 /*
4395  * mrsas_sync_map_info:        Get FW's ld_map structure input:
4396  * Adapter instance soft state
4397  *
4398  * Issues an internal command (DCMD) to get the FW's controller PD list
4399  * structure.
4400  */
4401 static int
4402 mrsas_sync_map_info(struct mrsas_softc *sc)
4403 {
4404 	int retcode = 0, i;
4405 	struct mrsas_mfi_cmd *cmd;
4406 	struct mrsas_dcmd_frame *dcmd;
4407 	uint32_t size_sync_info, num_lds;
4408 	MR_LD_TARGET_SYNC *target_map = NULL;
4409 	MR_DRV_RAID_MAP_ALL *map;
4410 	MR_LD_RAID *raid;
4411 	MR_LD_TARGET_SYNC *ld_sync;
4412 	bus_addr_t map_phys_addr = 0;
4413 
4414 	cmd = mrsas_get_mfi_cmd(sc);
4415 	if (!cmd) {
4416 		device_printf(sc->mrsas_dev, "Cannot alloc for sync map info cmd\n");
4417 		return ENOMEM;
4418 	}
4419 	map = sc->ld_drv_map[sc->map_id & 1];
4420 	num_lds = map->raidMap.ldCount;
4421 
4422 	dcmd = &cmd->frame->dcmd;
4423 	size_sync_info = sizeof(MR_LD_TARGET_SYNC) * num_lds;
4424 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4425 
4426 	target_map = (MR_LD_TARGET_SYNC *) sc->raidmap_mem[(sc->map_id - 1) & 1];
4427 	memset(target_map, 0, sc->max_map_sz);
4428 
4429 	map_phys_addr = sc->raidmap_phys_addr[(sc->map_id - 1) & 1];
4430 
4431 	ld_sync = (MR_LD_TARGET_SYNC *) target_map;
4432 
4433 	for (i = 0; i < num_lds; i++, ld_sync++) {
4434 		raid = MR_LdRaidGet(i, map);
4435 		ld_sync->targetId = MR_GetLDTgtId(i, map);
4436 		ld_sync->seqNum = raid->seqNum;
4437 	}
4438 
4439 	dcmd->cmd = MFI_CMD_DCMD;
4440 	dcmd->cmd_status = 0xFF;
4441 	dcmd->sge_count = 1;
4442 	dcmd->flags = MFI_FRAME_DIR_WRITE;
4443 	dcmd->timeout = 0;
4444 	dcmd->pad_0 = 0;
4445 	dcmd->data_xfer_len = sc->current_map_sz;
4446 	dcmd->mbox.b[0] = num_lds;
4447 	dcmd->mbox.b[1] = MRSAS_DCMD_MBOX_PEND_FLAG;
4448 	dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO;
4449 	dcmd->sgl.sge32[0].phys_addr = map_phys_addr;
4450 	dcmd->sgl.sge32[0].length = sc->current_map_sz;
4451 
4452 	sc->map_update_cmd = cmd;
4453 	if (mrsas_issue_dcmd(sc, cmd)) {
4454 		device_printf(sc->mrsas_dev,
4455 		    "Fail to send sync map info command.\n");
4456 		return (1);
4457 	}
4458 	return (retcode);
4459 }
4460 
4461 /* Input:	dcmd.opcode		- MR_DCMD_PD_GET_INFO
4462   *		dcmd.mbox.s[0]		- deviceId for this physical drive
4463   *		dcmd.sge IN		- ptr to returned MR_PD_INFO structure
4464   * Desc:	Firmware return the physical drive info structure
4465   *
4466   */
4467 static void
4468 mrsas_get_pd_info(struct mrsas_softc *sc, u_int16_t device_id)
4469 {
4470 	int retcode;
4471 	u_int8_t do_ocr = 1;
4472 	struct mrsas_mfi_cmd *cmd;
4473 	struct mrsas_dcmd_frame *dcmd;
4474 
4475 	cmd = mrsas_get_mfi_cmd(sc);
4476 
4477 	if (!cmd) {
4478 		device_printf(sc->mrsas_dev,
4479 		    "Cannot alloc for get PD info cmd\n");
4480 		return;
4481 	}
4482 	dcmd = &cmd->frame->dcmd;
4483 
4484 	memset(sc->pd_info_mem, 0, sizeof(struct mrsas_pd_info));
4485 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4486 
4487 	dcmd->mbox.s[0] = device_id;
4488 	dcmd->cmd = MFI_CMD_DCMD;
4489 	dcmd->cmd_status = 0xFF;
4490 	dcmd->sge_count = 1;
4491 	dcmd->flags = MFI_FRAME_DIR_READ;
4492 	dcmd->timeout = 0;
4493 	dcmd->pad_0 = 0;
4494 	dcmd->data_xfer_len = sizeof(struct mrsas_pd_info);
4495 	dcmd->opcode = MR_DCMD_PD_GET_INFO;
4496 	dcmd->sgl.sge32[0].phys_addr = (u_int32_t)sc->pd_info_phys_addr;
4497 	dcmd->sgl.sge32[0].length = sizeof(struct mrsas_pd_info);
4498 
4499 	if (!sc->mask_interrupts)
4500 		retcode = mrsas_issue_blocked_cmd(sc, cmd);
4501 	else
4502 		retcode = mrsas_issue_polled(sc, cmd);
4503 
4504 	if (retcode == ETIMEDOUT)
4505 		goto dcmd_timeout;
4506 
4507 	sc->target_list[device_id].interface_type =
4508 		sc->pd_info_mem->state.ddf.pdType.intf;
4509 
4510 	do_ocr = 0;
4511 
4512 dcmd_timeout:
4513 
4514 	if (do_ocr)
4515 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
4516 
4517 	if (!sc->mask_interrupts)
4518 		mrsas_release_mfi_cmd(cmd);
4519 }
4520 
4521 /*
4522  * mrsas_add_target:				Add target ID of system PD/VD to driver's data structure.
4523  * sc:						Adapter's soft state
4524  * target_id:					Unique target id per controller(managed by driver)
4525  *						for system PDs- target ID ranges from 0 to (MRSAS_MAX_PD - 1)
4526  *						for VDs- target ID ranges from MRSAS_MAX_PD to MRSAS_MAX_TM_TARGETS
4527  * return:					void
4528  * Descripton:					This function will be called whenever system PD or VD is created.
4529  */
4530 static void mrsas_add_target(struct mrsas_softc *sc,
4531 	u_int16_t target_id)
4532 {
4533 	sc->target_list[target_id].target_id = target_id;
4534 
4535 	device_printf(sc->mrsas_dev,
4536 		"%s created target ID: 0x%x\n",
4537 		(target_id < MRSAS_MAX_PD ? "System PD" : "VD"),
4538 		(target_id < MRSAS_MAX_PD ? target_id : (target_id - MRSAS_MAX_PD)));
4539 	/*
4540 	 * If interrupts are enabled, then only fire DCMD to get pd_info
4541 	 * for system PDs
4542 	 */
4543 	if (!sc->mask_interrupts && sc->pd_info_mem &&
4544 		(target_id < MRSAS_MAX_PD))
4545 		mrsas_get_pd_info(sc, target_id);
4546 
4547 }
4548 
4549 /*
4550  * mrsas_remove_target:			Remove target ID of system PD/VD from driver's data structure.
4551  * sc:						Adapter's soft state
4552  * target_id:					Unique target id per controller(managed by driver)
4553  *						for system PDs- target ID ranges from 0 to (MRSAS_MAX_PD - 1)
4554  *						for VDs- target ID ranges from MRSAS_MAX_PD to MRSAS_MAX_TM_TARGETS
4555  * return:					void
4556  * Descripton:					This function will be called whenever system PD or VD is deleted
4557  */
4558 static void mrsas_remove_target(struct mrsas_softc *sc,
4559 	u_int16_t target_id)
4560 {
4561 	sc->target_list[target_id].target_id = 0xffff;
4562 	device_printf(sc->mrsas_dev,
4563 		"%s deleted target ID: 0x%x\n",
4564 		(target_id < MRSAS_MAX_PD ? "System PD" : "VD"),
4565 		(target_id < MRSAS_MAX_PD ? target_id : (target_id - MRSAS_MAX_PD)));
4566 }
4567 
4568 /*
4569  * mrsas_get_pd_list:           Returns FW's PD list structure input:
4570  * Adapter soft state
4571  *
4572  * Issues an internal command (DCMD) to get the FW's controller PD list
4573  * structure.  This information is mainly used to find out about system
4574  * supported by Firmware.
4575  */
4576 static int
4577 mrsas_get_pd_list(struct mrsas_softc *sc)
4578 {
4579 	int retcode = 0, pd_index = 0, pd_count = 0, pd_list_size;
4580 	u_int8_t do_ocr = 1;
4581 	struct mrsas_mfi_cmd *cmd;
4582 	struct mrsas_dcmd_frame *dcmd;
4583 	struct MR_PD_LIST *pd_list_mem;
4584 	struct MR_PD_ADDRESS *pd_addr;
4585 	bus_addr_t pd_list_phys_addr = 0;
4586 	struct mrsas_tmp_dcmd *tcmd;
4587 
4588 	cmd = mrsas_get_mfi_cmd(sc);
4589 	if (!cmd) {
4590 		device_printf(sc->mrsas_dev,
4591 		    "Cannot alloc for get PD list cmd\n");
4592 		return 1;
4593 	}
4594 	dcmd = &cmd->frame->dcmd;
4595 
4596 	tcmd = malloc(sizeof(struct mrsas_tmp_dcmd), M_MRSAS, M_NOWAIT);
4597 	pd_list_size = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST);
4598 	if (mrsas_alloc_tmp_dcmd(sc, tcmd, pd_list_size) != SUCCESS) {
4599 		device_printf(sc->mrsas_dev,
4600 		    "Cannot alloc dmamap for get PD list cmd\n");
4601 		mrsas_release_mfi_cmd(cmd);
4602 		mrsas_free_tmp_dcmd(tcmd);
4603 		free(tcmd, M_MRSAS);
4604 		return (ENOMEM);
4605 	} else {
4606 		pd_list_mem = tcmd->tmp_dcmd_mem;
4607 		pd_list_phys_addr = tcmd->tmp_dcmd_phys_addr;
4608 	}
4609 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4610 
4611 	dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
4612 	dcmd->mbox.b[1] = 0;
4613 	dcmd->cmd = MFI_CMD_DCMD;
4614 	dcmd->cmd_status = 0xFF;
4615 	dcmd->sge_count = 1;
4616 	dcmd->flags = MFI_FRAME_DIR_READ;
4617 	dcmd->timeout = 0;
4618 	dcmd->pad_0 = 0;
4619 	dcmd->data_xfer_len = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST);
4620 	dcmd->opcode = MR_DCMD_PD_LIST_QUERY;
4621 	dcmd->sgl.sge32[0].phys_addr = pd_list_phys_addr;
4622 	dcmd->sgl.sge32[0].length = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST);
4623 
4624 	if (!sc->mask_interrupts)
4625 		retcode = mrsas_issue_blocked_cmd(sc, cmd);
4626 	else
4627 		retcode = mrsas_issue_polled(sc, cmd);
4628 
4629 	if (retcode == ETIMEDOUT)
4630 		goto dcmd_timeout;
4631 
4632 	/* Get the instance PD list */
4633 	pd_count = MRSAS_MAX_PD;
4634 	pd_addr = pd_list_mem->addr;
4635 	if (pd_list_mem->count < pd_count) {
4636 		memset(sc->local_pd_list, 0,
4637 		    MRSAS_MAX_PD * sizeof(struct mrsas_pd_list));
4638 		for (pd_index = 0; pd_index < pd_list_mem->count; pd_index++) {
4639 			sc->local_pd_list[pd_addr->deviceId].tid = pd_addr->deviceId;
4640 			sc->local_pd_list[pd_addr->deviceId].driveType =
4641 			    pd_addr->scsiDevType;
4642 			sc->local_pd_list[pd_addr->deviceId].driveState =
4643 			    MR_PD_STATE_SYSTEM;
4644 			if (sc->target_list[pd_addr->deviceId].target_id == 0xffff)
4645 				mrsas_add_target(sc, pd_addr->deviceId);
4646 			pd_addr++;
4647 		}
4648 		for (pd_index = 0; pd_index < MRSAS_MAX_PD; pd_index++) {
4649 			if ((sc->local_pd_list[pd_index].driveState !=
4650 				MR_PD_STATE_SYSTEM) &&
4651 				(sc->target_list[pd_index].target_id !=
4652 				0xffff)) {
4653 				mrsas_remove_target(sc, pd_index);
4654 			}
4655 		}
4656 		/*
4657 		 * Use mutext/spinlock if pd_list component size increase more than
4658 		 * 32 bit.
4659 		 */
4660 		memcpy(sc->pd_list, sc->local_pd_list, sizeof(sc->local_pd_list));
4661 		do_ocr = 0;
4662 	}
4663 dcmd_timeout:
4664 	mrsas_free_tmp_dcmd(tcmd);
4665 	free(tcmd, M_MRSAS);
4666 
4667 	if (do_ocr)
4668 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
4669 
4670 	if (!sc->mask_interrupts)
4671 		mrsas_release_mfi_cmd(cmd);
4672 
4673 	return (retcode);
4674 }
4675 
4676 /*
4677  * mrsas_get_ld_list:           Returns FW's LD list structure input:
4678  * Adapter soft state
4679  *
4680  * Issues an internal command (DCMD) to get the FW's controller PD list
4681  * structure.  This information is mainly used to find out about supported by
4682  * the FW.
4683  */
4684 static int
4685 mrsas_get_ld_list(struct mrsas_softc *sc)
4686 {
4687 	int ld_list_size, retcode = 0, ld_index = 0, ids = 0, drv_tgt_id;
4688 	u_int8_t do_ocr = 1;
4689 	struct mrsas_mfi_cmd *cmd;
4690 	struct mrsas_dcmd_frame *dcmd;
4691 	struct MR_LD_LIST *ld_list_mem;
4692 	bus_addr_t ld_list_phys_addr = 0;
4693 	struct mrsas_tmp_dcmd *tcmd;
4694 
4695 	cmd = mrsas_get_mfi_cmd(sc);
4696 	if (!cmd) {
4697 		device_printf(sc->mrsas_dev,
4698 		    "Cannot alloc for get LD list cmd\n");
4699 		return 1;
4700 	}
4701 	dcmd = &cmd->frame->dcmd;
4702 
4703 	tcmd = malloc(sizeof(struct mrsas_tmp_dcmd), M_MRSAS, M_NOWAIT);
4704 	ld_list_size = sizeof(struct MR_LD_LIST);
4705 	if (mrsas_alloc_tmp_dcmd(sc, tcmd, ld_list_size) != SUCCESS) {
4706 		device_printf(sc->mrsas_dev,
4707 		    "Cannot alloc dmamap for get LD list cmd\n");
4708 		mrsas_release_mfi_cmd(cmd);
4709 		mrsas_free_tmp_dcmd(tcmd);
4710 		free(tcmd, M_MRSAS);
4711 		return (ENOMEM);
4712 	} else {
4713 		ld_list_mem = tcmd->tmp_dcmd_mem;
4714 		ld_list_phys_addr = tcmd->tmp_dcmd_phys_addr;
4715 	}
4716 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
4717 
4718 	if (sc->max256vdSupport)
4719 		dcmd->mbox.b[0] = 1;
4720 
4721 	dcmd->cmd = MFI_CMD_DCMD;
4722 	dcmd->cmd_status = 0xFF;
4723 	dcmd->sge_count = 1;
4724 	dcmd->flags = MFI_FRAME_DIR_READ;
4725 	dcmd->timeout = 0;
4726 	dcmd->data_xfer_len = sizeof(struct MR_LD_LIST);
4727 	dcmd->opcode = MR_DCMD_LD_GET_LIST;
4728 	dcmd->sgl.sge32[0].phys_addr = ld_list_phys_addr;
4729 	dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST);
4730 	dcmd->pad_0 = 0;
4731 
4732 	if (!sc->mask_interrupts)
4733 		retcode = mrsas_issue_blocked_cmd(sc, cmd);
4734 	else
4735 		retcode = mrsas_issue_polled(sc, cmd);
4736 
4737 	if (retcode == ETIMEDOUT)
4738 		goto dcmd_timeout;
4739 
4740 #if VD_EXT_DEBUG
4741 	printf("Number of LDs %d\n", ld_list_mem->ldCount);
4742 #endif
4743 
4744 	/* Get the instance LD list */
4745 	if (ld_list_mem->ldCount <= sc->fw_supported_vd_count) {
4746 		sc->CurLdCount = ld_list_mem->ldCount;
4747 		memset(sc->ld_ids, 0xff, MAX_LOGICAL_DRIVES_EXT);
4748 		for (ld_index = 0; ld_index < ld_list_mem->ldCount; ld_index++) {
4749 			ids = ld_list_mem->ldList[ld_index].ref.ld_context.targetId;
4750 			drv_tgt_id = ids + MRSAS_MAX_PD;
4751 			if (ld_list_mem->ldList[ld_index].state != 0) {
4752 				sc->ld_ids[ids] = ld_list_mem->ldList[ld_index].ref.ld_context.targetId;
4753 				if (sc->target_list[drv_tgt_id].target_id ==
4754 					0xffff)
4755 					mrsas_add_target(sc, drv_tgt_id);
4756 			} else {
4757 				if (sc->target_list[drv_tgt_id].target_id !=
4758 					0xffff)
4759 					mrsas_remove_target(sc,
4760 						drv_tgt_id);
4761 			}
4762 		}
4763 
4764 		do_ocr = 0;
4765 	}
4766 dcmd_timeout:
4767 	mrsas_free_tmp_dcmd(tcmd);
4768 	free(tcmd, M_MRSAS);
4769 
4770 	if (do_ocr)
4771 		sc->do_timedout_reset = MFI_DCMD_TIMEOUT_OCR;
4772 	if (!sc->mask_interrupts)
4773 		mrsas_release_mfi_cmd(cmd);
4774 
4775 	return (retcode);
4776 }
4777 
4778 /*
4779  * mrsas_alloc_tmp_dcmd:       Allocates memory for temporary command input:
4780  * Adapter soft state Temp command Size of alloction
4781  *
4782  * Allocates DMAable memory for a temporary internal command. The allocated
4783  * memory is initialized to all zeros upon successful loading of the dma
4784  * mapped memory.
4785  */
4786 int
4787 mrsas_alloc_tmp_dcmd(struct mrsas_softc *sc,
4788     struct mrsas_tmp_dcmd *tcmd, int size)
4789 {
4790 	if (bus_dma_tag_create(sc->mrsas_parent_tag,
4791 	    1, 0,
4792 	    BUS_SPACE_MAXADDR_32BIT,
4793 	    BUS_SPACE_MAXADDR,
4794 	    NULL, NULL,
4795 	    size,
4796 	    1,
4797 	    size,
4798 	    BUS_DMA_ALLOCNOW,
4799 	    NULL, NULL,
4800 	    &tcmd->tmp_dcmd_tag)) {
4801 		device_printf(sc->mrsas_dev, "Cannot allocate tmp dcmd tag\n");
4802 		return (ENOMEM);
4803 	}
4804 	if (bus_dmamem_alloc(tcmd->tmp_dcmd_tag, (void **)&tcmd->tmp_dcmd_mem,
4805 	    BUS_DMA_NOWAIT, &tcmd->tmp_dcmd_dmamap)) {
4806 		device_printf(sc->mrsas_dev, "Cannot allocate tmp dcmd mem\n");
4807 		return (ENOMEM);
4808 	}
4809 	if (bus_dmamap_load(tcmd->tmp_dcmd_tag, tcmd->tmp_dcmd_dmamap,
4810 	    tcmd->tmp_dcmd_mem, size, mrsas_addr_cb,
4811 	    &tcmd->tmp_dcmd_phys_addr, BUS_DMA_NOWAIT)) {
4812 		device_printf(sc->mrsas_dev, "Cannot load tmp dcmd mem\n");
4813 		return (ENOMEM);
4814 	}
4815 	memset(tcmd->tmp_dcmd_mem, 0, size);
4816 	return (0);
4817 }
4818 
4819 /*
4820  * mrsas_free_tmp_dcmd:      Free memory for temporary command input:
4821  * temporary dcmd pointer
4822  *
4823  * Deallocates memory of the temporary command for use in the construction of
4824  * the internal DCMD.
4825  */
4826 void
4827 mrsas_free_tmp_dcmd(struct mrsas_tmp_dcmd *tmp)
4828 {
4829 	if (tmp->tmp_dcmd_phys_addr)
4830 		bus_dmamap_unload(tmp->tmp_dcmd_tag, tmp->tmp_dcmd_dmamap);
4831 	if (tmp->tmp_dcmd_mem != NULL)
4832 		bus_dmamem_free(tmp->tmp_dcmd_tag, tmp->tmp_dcmd_mem, tmp->tmp_dcmd_dmamap);
4833 	if (tmp->tmp_dcmd_tag != NULL)
4834 		bus_dma_tag_destroy(tmp->tmp_dcmd_tag);
4835 }
4836 
4837 /*
4838  * mrsas_issue_blocked_abort_cmd:       Aborts previously issued cmd input:
4839  * Adapter soft state Previously issued cmd to be aborted
4840  *
4841  * This function is used to abort previously issued commands, such as AEN and
4842  * RAID map sync map commands.  The abort command is sent as a DCMD internal
4843  * command and subsequently the driver will wait for a return status.  The
4844  * max wait time is MRSAS_INTERNAL_CMD_WAIT_TIME seconds.
4845  */
4846 static int
4847 mrsas_issue_blocked_abort_cmd(struct mrsas_softc *sc,
4848     struct mrsas_mfi_cmd *cmd_to_abort)
4849 {
4850 	struct mrsas_mfi_cmd *cmd;
4851 	struct mrsas_abort_frame *abort_fr;
4852 	u_int8_t retcode = 0;
4853 	unsigned long total_time = 0;
4854 	u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME;
4855 
4856 	cmd = mrsas_get_mfi_cmd(sc);
4857 	if (!cmd) {
4858 		device_printf(sc->mrsas_dev, "Cannot alloc for abort cmd\n");
4859 		return (1);
4860 	}
4861 	abort_fr = &cmd->frame->abort;
4862 
4863 	/* Prepare and issue the abort frame */
4864 	abort_fr->cmd = MFI_CMD_ABORT;
4865 	abort_fr->cmd_status = 0xFF;
4866 	abort_fr->flags = 0;
4867 	abort_fr->abort_context = cmd_to_abort->index;
4868 	abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr;
4869 	abort_fr->abort_mfi_phys_addr_hi = 0;
4870 
4871 	cmd->sync_cmd = 1;
4872 	cmd->cmd_status = 0xFF;
4873 
4874 	if (mrsas_issue_dcmd(sc, cmd)) {
4875 		device_printf(sc->mrsas_dev, "Fail to send abort command.\n");
4876 		return (1);
4877 	}
4878 	/* Wait for this cmd to complete */
4879 	sc->chan = (void *)&cmd;
4880 	while (1) {
4881 		if (cmd->cmd_status == 0xFF) {
4882 			tsleep((void *)&sc->chan, 0, "mrsas_sleep", hz);
4883 		} else
4884 			break;
4885 		total_time++;
4886 		if (total_time >= max_wait) {
4887 			device_printf(sc->mrsas_dev, "Abort cmd timed out after %d sec.\n", max_wait);
4888 			retcode = 1;
4889 			break;
4890 		}
4891 	}
4892 
4893 	cmd->sync_cmd = 0;
4894 	mrsas_release_mfi_cmd(cmd);
4895 	return (retcode);
4896 }
4897 
4898 /*
4899  * mrsas_complete_abort:      Completes aborting a command input:
4900  * Adapter soft state Cmd that was issued to abort another cmd
4901  *
4902  * The mrsas_issue_blocked_abort_cmd() function waits for the command status to
4903  * change after sending the command.  This function is called from
4904  * mrsas_complete_mptmfi_passthru() to wake up the sleep thread associated.
4905  */
4906 void
4907 mrsas_complete_abort(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
4908 {
4909 	if (cmd->sync_cmd) {
4910 		cmd->sync_cmd = 0;
4911 		cmd->cmd_status = 0;
4912 		sc->chan = (void *)&cmd;
4913 		wakeup_one((void *)&sc->chan);
4914 	}
4915 	return;
4916 }
4917 
4918 /*
4919  * mrsas_aen_handler:	AEN processing callback function from thread context
4920  * input:				Adapter soft state
4921  *
4922  * Asynchronous event handler
4923  */
4924 void
4925 mrsas_aen_handler(struct mrsas_softc *sc)
4926 {
4927 	union mrsas_evt_class_locale class_locale;
4928 	int doscan = 0;
4929 	u_int32_t seq_num;
4930  	int error, fail_aen = 0;
4931 
4932 	if (sc == NULL) {
4933 		printf("invalid instance!\n");
4934 		return;
4935 	}
4936 	if (sc->remove_in_progress || sc->reset_in_progress) {
4937 		device_printf(sc->mrsas_dev, "Returning from %s, line no %d\n",
4938 			__func__, __LINE__);
4939 		return;
4940 	}
4941 	if (sc->evt_detail_mem) {
4942 		switch (sc->evt_detail_mem->code) {
4943 		case MR_EVT_PD_INSERTED:
4944 			fail_aen = mrsas_get_pd_list(sc);
4945 			if (!fail_aen)
4946 				mrsas_bus_scan_sim(sc, sc->sim_1);
4947 			else
4948 				goto skip_register_aen;
4949 			break;
4950 		case MR_EVT_PD_REMOVED:
4951 			fail_aen = mrsas_get_pd_list(sc);
4952 			if (!fail_aen)
4953 				mrsas_bus_scan_sim(sc, sc->sim_1);
4954 			else
4955 				goto skip_register_aen;
4956 			break;
4957 		case MR_EVT_LD_OFFLINE:
4958 		case MR_EVT_CFG_CLEARED:
4959 		case MR_EVT_LD_DELETED:
4960 			mrsas_bus_scan_sim(sc, sc->sim_0);
4961 			break;
4962 		case MR_EVT_LD_CREATED:
4963 			fail_aen = mrsas_get_ld_list(sc);
4964 			if (!fail_aen)
4965 				mrsas_bus_scan_sim(sc, sc->sim_0);
4966 			else
4967 				goto skip_register_aen;
4968 			break;
4969 		case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
4970 		case MR_EVT_FOREIGN_CFG_IMPORTED:
4971 		case MR_EVT_LD_STATE_CHANGE:
4972 			doscan = 1;
4973 			break;
4974 		case MR_EVT_CTRL_PROP_CHANGED:
4975 			fail_aen = mrsas_get_ctrl_info(sc);
4976 			if (fail_aen)
4977 				goto skip_register_aen;
4978 			break;
4979 		default:
4980 			break;
4981 		}
4982 	} else {
4983 		device_printf(sc->mrsas_dev, "invalid evt_detail\n");
4984 		return;
4985 	}
4986 	if (doscan) {
4987 		fail_aen = mrsas_get_pd_list(sc);
4988 		if (!fail_aen) {
4989 			mrsas_dprint(sc, MRSAS_AEN, "scanning ...sim 1\n");
4990 			mrsas_bus_scan_sim(sc, sc->sim_1);
4991 		} else
4992 			goto skip_register_aen;
4993 
4994 		fail_aen = mrsas_get_ld_list(sc);
4995 		if (!fail_aen) {
4996 			mrsas_dprint(sc, MRSAS_AEN, "scanning ...sim 0\n");
4997 			mrsas_bus_scan_sim(sc, sc->sim_0);
4998 		} else
4999 			goto skip_register_aen;
5000 	}
5001 	seq_num = sc->evt_detail_mem->seq_num + 1;
5002 
5003 	/* Register AEN with FW for latest sequence number plus 1 */
5004 	class_locale.members.reserved = 0;
5005 	class_locale.members.locale = MR_EVT_LOCALE_ALL;
5006 	class_locale.members.class = MR_EVT_CLASS_DEBUG;
5007 
5008 	if (sc->aen_cmd != NULL)
5009 		return;
5010 
5011 	mtx_lock(&sc->aen_lock);
5012 	error = mrsas_register_aen(sc, seq_num,
5013 	    class_locale.word);
5014 	mtx_unlock(&sc->aen_lock);
5015 
5016 	if (error)
5017 		device_printf(sc->mrsas_dev, "register aen failed error %x\n", error);
5018 
5019 skip_register_aen:
5020 	return;
5021 
5022 }
5023 
5024 
5025 /*
5026  * mrsas_complete_aen:	Completes AEN command
5027  * input:				Adapter soft state
5028  * 						Cmd that was issued to abort another cmd
5029  *
5030  * This function will be called from ISR and will continue event processing from
5031  * thread context by enqueuing task in ev_tq (callback function
5032  * "mrsas_aen_handler").
5033  */
5034 void
5035 mrsas_complete_aen(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
5036 {
5037 	/*
5038 	 * Don't signal app if it is just an aborted previously registered
5039 	 * aen
5040 	 */
5041 	if ((!cmd->abort_aen) && (sc->remove_in_progress == 0)) {
5042 		sc->mrsas_aen_triggered = 1;
5043 		mtx_lock(&sc->aen_lock);
5044 		if (sc->mrsas_poll_waiting) {
5045 			sc->mrsas_poll_waiting = 0;
5046 			selwakeup(&sc->mrsas_select);
5047 		}
5048 		mtx_unlock(&sc->aen_lock);
5049 	} else
5050 		cmd->abort_aen = 0;
5051 
5052 	sc->aen_cmd = NULL;
5053 	mrsas_release_mfi_cmd(cmd);
5054 
5055 	taskqueue_enqueue(sc->ev_tq, &sc->ev_task);
5056 
5057 	return;
5058 }
5059 
5060 static device_method_t mrsas_methods[] = {
5061 	DEVMETHOD(device_probe, mrsas_probe),
5062 	DEVMETHOD(device_attach, mrsas_attach),
5063 	DEVMETHOD(device_detach, mrsas_detach),
5064 	DEVMETHOD(device_shutdown, mrsas_shutdown),
5065 	DEVMETHOD(device_suspend, mrsas_suspend),
5066 	DEVMETHOD(device_resume, mrsas_resume),
5067 	DEVMETHOD(bus_print_child, bus_generic_print_child),
5068 	DEVMETHOD(bus_driver_added, bus_generic_driver_added),
5069 	{0, 0}
5070 };
5071 
5072 static driver_t mrsas_driver = {
5073 	"mrsas",
5074 	mrsas_methods,
5075 	sizeof(struct mrsas_softc)
5076 };
5077 
5078 static devclass_t mrsas_devclass;
5079 
5080 DRIVER_MODULE(mrsas, pci, mrsas_driver, mrsas_devclass, 0, 0);
5081 MODULE_DEPEND(mrsas, cam, 1, 1, 1);
5082