xref: /freebsd/sys/dev/mpt/mpt_cam.h (revision cfd6422a5217410fbd66f7a7a8a64d9d85e61229)
1 /* $FreeBSD$ */
2 /*-
3  * LSI MPT Host Adapter FreeBSD Wrapper Definitions (CAM version)
4  *
5  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-3-Clause
6  *
7  * Copyright (c) 2000, 2001 by Greg Ansley, Adam Prewett
8  *
9  * Partially derived from Matty Jacobs ISP driver.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice immediately at the beginning of the file, without modification,
16  *    this list of conditions, and the following disclaimer.
17  * 2. The name of the author may not be used to endorse or promote products
18  *    derived from this software without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
24  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29  */
30 /*-
31  * Copyright (c) 2002, 2006 by Matthew Jacob
32  * All rights reserved.
33  *
34  * Redistribution and use in source and binary forms, with or without
35  * modification, are permitted provided that the following conditions are
36  * met:
37  * 1. Redistributions of source code must retain the above copyright
38  *    notice, this list of conditions and the following disclaimer.
39  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
40  *    substantially similar to the "NO WARRANTY" disclaimer below
41  *    ("Disclaimer") and any redistribution must be conditioned upon including
42  *    a substantially similar Disclaimer requirement for further binary
43  *    redistribution.
44  * 3. Neither the names of the above listed copyright holders nor the names
45  *    of any contributors may be used to endorse or promote products derived
46  *    from this software without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
49  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
52  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
53  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
54  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
55  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
56  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
57  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
58  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
59  *
60  * Support from Chris Ellsworth in order to make SAS adapters work
61  * is gratefully acknowledged.
62  *
63  * Support from LSI-Logic has also gone a great deal toward making this a
64  * workable subsystem and is gratefully acknowledged.
65  */
66 /*-
67  * Copyright (c) 2004, Avid Technology, Inc. and its contributors.
68  * Copyright (c) 2005, WHEEL Sp. z o.o.
69  * Copyright (c) 2004, 2005 Justin T. Gibbs
70  * All rights reserved.
71  *
72  * Redistribution and use in source and binary forms, with or without
73  * modification, are permitted provided that the following conditions are
74  * met:
75  * 1. Redistributions of source code must retain the above copyright
76  *    notice, this list of conditions and the following disclaimer.
77  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
78  *    substantially similar to the "NO WARRANTY" disclaimer below
79  *    ("Disclaimer") and any redistribution must be conditioned upon including
80  *    a substantially similar Disclaimer requirement for further binary
81  *    redistribution.
82  * 3. Neither the names of the above listed copyright holders nor the names
83  *    of any contributors may be used to endorse or promote products derived
84  *    from this software without specific prior written permission.
85  *
86  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
87  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
88  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
89  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
90  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
91  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
92  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
93  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
94  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
95  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
96  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
97  */
98 #ifndef  _MPT_CAM_H_
99 #define  _MPT_CAM_H_
100 
101 #include <cam/cam.h>
102 #include <cam/cam_debug.h>
103 #include <cam/cam_ccb.h>
104 #include <cam/cam_sim.h>
105 #include <cam/cam_xpt.h>
106 #include <cam/cam_periph.h>
107 #include <cam/cam_xpt_sim.h>
108 #include <cam/cam_debug.h>
109 #include <cam/scsi/scsi_all.h>
110 #include <cam/scsi/scsi_message.h>
111 
112 #define ccb_mpt_ptr sim_priv.entries[0].ptr
113 #define ccb_req_ptr sim_priv.entries[1].ptr
114 
115 /************************** CCB Manipulation Routines *************************/
116 static __inline void mpt_freeze_ccb(union ccb *ccb);
117 static __inline void mpt_set_ccb_status(union ccb *ccb, cam_status status);
118 
119 static __inline void
120 mpt_freeze_ccb(union ccb *ccb)
121 {
122 	if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
123 		ccb->ccb_h.status |= CAM_DEV_QFRZN;
124 		xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
125 	}
126 }
127 
128 static __inline void
129 mpt_set_ccb_status(union ccb *ccb, cam_status status)
130 {
131 	ccb->ccb_h.status &= ~CAM_STATUS_MASK;
132 	ccb->ccb_h.status |= status;
133 }
134 
135 /****************************** Timeout Recovery ******************************/
136 /*
137  * The longest timeout specified for a Task Managent command.
138  */
139 #define	MPT_TMF_MAX_TIMEOUT	(20000)
140 
141 static __inline void
142 mpt_wakeup_recovery_thread(struct mpt_softc *mpt)
143 {
144 	wakeup(mpt);
145 }
146 
147 /************************** Version Compatibility *************************/
148 #if	__FreeBSD_version < 700031
149 #define	mpt_sim_alloc(a, b, c, mpt, e, f, g)	\
150 	cam_sim_alloc(a, b, c, mpt, (mpt)->unit, e, f, g)
151 #else
152 #define	mpt_sim_alloc(a, b, c, mpt, e, f, g)	\
153 	cam_sim_alloc(a, b, c, mpt, (mpt)->unit, &(mpt)->mpt_lock, e, f, g)
154 #endif
155 #endif /*_MPT_CAM_H_ */
156