xref: /freebsd/sys/dev/mpt/mpt_cam.h (revision aa1a8ff2d6dbc51ef058f46f3db5a8bb77967145)
1 /*-
2  * LSI MPT Host Adapter FreeBSD Wrapper Definitions (CAM version)
3  *
4  * SPDX-License-Identifier: BSD-2-Clause AND BSD-3-Clause
5  *
6  * Copyright (c) 2000, 2001 by Greg Ansley, Adam Prewett
7  *
8  * Partially derived from Matty Jacobs ISP driver.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice immediately at the beginning of the file, without modification,
15  *    this list of conditions, and the following disclaimer.
16  * 2. The name of the author may not be used to endorse or promote products
17  *    derived from this software without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  */
29 /*-
30  * Copyright (c) 2002, 2006 by Matthew Jacob
31  * All rights reserved.
32  *
33  * Redistribution and use in source and binary forms, with or without
34  * modification, are permitted provided that the following conditions are
35  * met:
36  * 1. Redistributions of source code must retain the above copyright
37  *    notice, this list of conditions and the following disclaimer.
38  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
39  *    substantially similar to the "NO WARRANTY" disclaimer below
40  *    ("Disclaimer") and any redistribution must be conditioned upon including
41  *    a substantially similar Disclaimer requirement for further binary
42  *    redistribution.
43  * 3. Neither the names of the above listed copyright holders nor the names
44  *    of any contributors may be used to endorse or promote products derived
45  *    from this software without specific prior written permission.
46  *
47  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
48  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
49  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
50  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
51  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
52  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
53  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
54  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
55  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
56  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
57  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
58  *
59  * Support from Chris Ellsworth in order to make SAS adapters work
60  * is gratefully acknowledged.
61  *
62  * Support from LSI-Logic has also gone a great deal toward making this a
63  * workable subsystem and is gratefully acknowledged.
64  */
65 /*-
66  * Copyright (c) 2004, Avid Technology, Inc. and its contributors.
67  * Copyright (c) 2005, WHEEL Sp. z o.o.
68  * Copyright (c) 2004, 2005 Justin T. Gibbs
69  * All rights reserved.
70  *
71  * Redistribution and use in source and binary forms, with or without
72  * modification, are permitted provided that the following conditions are
73  * met:
74  * 1. Redistributions of source code must retain the above copyright
75  *    notice, this list of conditions and the following disclaimer.
76  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
77  *    substantially similar to the "NO WARRANTY" disclaimer below
78  *    ("Disclaimer") and any redistribution must be conditioned upon including
79  *    a substantially similar Disclaimer requirement for further binary
80  *    redistribution.
81  * 3. Neither the names of the above listed copyright holders nor the names
82  *    of any contributors may be used to endorse or promote products derived
83  *    from this software without specific prior written permission.
84  *
85  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
86  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
87  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
88  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
89  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
90  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
91  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
92  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
93  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
94  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
95  * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
96  */
97 #ifndef  _MPT_CAM_H_
98 #define  _MPT_CAM_H_
99 
100 #include <cam/cam.h>
101 #include <cam/cam_debug.h>
102 #include <cam/cam_ccb.h>
103 #include <cam/cam_sim.h>
104 #include <cam/cam_xpt.h>
105 #include <cam/cam_periph.h>
106 #include <cam/cam_xpt_sim.h>
107 #include <cam/cam_debug.h>
108 #include <cam/scsi/scsi_all.h>
109 #include <cam/scsi/scsi_message.h>
110 
111 #define ccb_mpt_ptr sim_priv.entries[0].ptr
112 #define ccb_req_ptr sim_priv.entries[1].ptr
113 
114 /************************** CCB Manipulation Routines *************************/
115 static __inline void mpt_freeze_ccb(union ccb *ccb);
116 static __inline void mpt_set_ccb_status(union ccb *ccb, cam_status status);
117 
118 static __inline void
119 mpt_freeze_ccb(union ccb *ccb)
120 {
121 	if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
122 		ccb->ccb_h.status |= CAM_DEV_QFRZN;
123 		xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
124 	}
125 }
126 
127 static __inline void
128 mpt_set_ccb_status(union ccb *ccb, cam_status status)
129 {
130 	ccb->ccb_h.status &= ~CAM_STATUS_MASK;
131 	ccb->ccb_h.status |= status;
132 }
133 
134 /****************************** Timeout Recovery ******************************/
135 /*
136  * The longest timeout specified for a Task Managent command.
137  */
138 #define	MPT_TMF_MAX_TIMEOUT	(20000)
139 
140 static __inline void
141 mpt_wakeup_recovery_thread(struct mpt_softc *mpt)
142 {
143 	wakeup(mpt);
144 }
145 
146 /************************** Version Compatibility *************************/
147 #define	mpt_sim_alloc(a, b, c, mpt, e, f, g)	\
148 	cam_sim_alloc(a, b, c, mpt, (mpt)->unit, &(mpt)->mpt_lock, e, f, g)
149 #endif /*_MPT_CAM_H_ */
150