1 /* $FreeBSD$ */ 2 /*- 3 * Generic defines for LSI '909 FC adapters. 4 * FreeBSD Version. 5 * 6 * Copyright (c) 2000, 2001 by Greg Ansley 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice immediately at the beginning of the file, without modification, 13 * this list of conditions, and the following disclaimer. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 /*- 30 * Copyright (c) 2002, 2006 by Matthew Jacob 31 * All rights reserved. 32 * 33 * Redistribution and use in source and binary forms, with or without 34 * modification, are permitted provided that the following conditions are 35 * met: 36 * 1. Redistributions of source code must retain the above copyright 37 * notice, this list of conditions and the following disclaimer. 38 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 39 * substantially similar to the "NO WARRANTY" disclaimer below 40 * ("Disclaimer") and any redistribution must be conditioned upon including 41 * a substantially similar Disclaimer requirement for further binary 42 * redistribution. 43 * 3. Neither the names of the above listed copyright holders nor the names 44 * of any contributors may be used to endorse or promote products derived 45 * from this software without specific prior written permission. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 48 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 49 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 50 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 51 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 52 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 53 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 54 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 55 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 56 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT 57 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 58 * 59 * Support from Chris Ellsworth in order to make SAS adapters work 60 * is gratefully acknowledged. 61 */ 62 /* 63 * Copyright (c) 2004, Avid Technology, Inc. and its contributors. 64 * Copyright (c) 2004, 2005 Justin T. Gibbs 65 * Copyright (c) 2005, WHEEL Sp. z o.o. 66 * All rights reserved. 67 * 68 * Redistribution and use in source and binary forms, with or without 69 * modification, are permitted provided that the following conditions are 70 * met: 71 * 1. Redistributions of source code must retain the above copyright 72 * notice, this list of conditions and the following disclaimer. 73 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 74 * substantially similar to the "NO WARRANTY" disclaimer below 75 * ("Disclaimer") and any redistribution must be conditioned upon including 76 * a substantially similar Disclaimer requirement for further binary 77 * redistribution. 78 * 3. Neither the names of the above listed copyright holders nor the names 79 * of any contributors may be used to endorse or promote products derived 80 * from this software without specific prior written permission. 81 * 82 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 83 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 84 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 85 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 86 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 87 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 88 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 89 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 90 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 91 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT 92 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 93 */ 94 95 #ifndef _MPT_H_ 96 #define _MPT_H_ 97 98 /********************************* OS Includes ********************************/ 99 #include <sys/types.h> 100 #include <sys/param.h> 101 #include <sys/systm.h> 102 #include <sys/endian.h> 103 #include <sys/eventhandler.h> 104 #if __FreeBSD_version < 500000 105 #include <sys/kernel.h> 106 #include <sys/queue.h> 107 #include <sys/malloc.h> 108 #else 109 #include <sys/lock.h> 110 #include <sys/kernel.h> 111 #include <sys/queue.h> 112 #include <sys/malloc.h> 113 #include <sys/mutex.h> 114 #include <sys/condvar.h> 115 #endif 116 #include <sys/proc.h> 117 #include <sys/bus.h> 118 #include <sys/module.h> 119 120 #include <machine/clock.h> 121 #include <machine/cpu.h> 122 #include <machine/resource.h> 123 124 #include <sys/rman.h> 125 126 #if __FreeBSD_version < 500000 127 #include <pci/pcireg.h> 128 #include <pci/pcivar.h> 129 #else 130 #include <dev/pci/pcireg.h> 131 #include <dev/pci/pcivar.h> 132 #endif 133 134 #include <machine/bus.h> 135 #include "opt_ddb.h" 136 137 /**************************** Register Definitions ****************************/ 138 #include <dev/mpt/mpt_reg.h> 139 140 /******************************* MPI Definitions ******************************/ 141 #include <dev/mpt/mpilib/mpi_type.h> 142 #include <dev/mpt/mpilib/mpi.h> 143 #include <dev/mpt/mpilib/mpi_cnfg.h> 144 #include <dev/mpt/mpilib/mpi_ioc.h> 145 #include <dev/mpt/mpilib/mpi_raid.h> 146 147 /* XXX For mpt_debug.c */ 148 #include <dev/mpt/mpilib/mpi_init.h> 149 150 /****************************** Misc Definitions ******************************/ 151 #define MPT_OK (0) 152 #define MPT_FAIL (0x10000) 153 154 #define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array)) 155 156 /**************************** Forward Declarations ****************************/ 157 struct mpt_softc; 158 struct mpt_personality; 159 typedef struct req_entry request_t; 160 161 /************************* Personality Module Support *************************/ 162 typedef int mpt_load_handler_t(struct mpt_personality *); 163 typedef int mpt_probe_handler_t(struct mpt_softc *); 164 typedef int mpt_attach_handler_t(struct mpt_softc *); 165 typedef int mpt_event_handler_t(struct mpt_softc *, request_t *, 166 MSG_EVENT_NOTIFY_REPLY *); 167 typedef void mpt_reset_handler_t(struct mpt_softc *, int /*type*/); 168 /* XXX Add return value and use for veto? */ 169 typedef void mpt_shutdown_handler_t(struct mpt_softc *); 170 typedef void mpt_detach_handler_t(struct mpt_softc *); 171 typedef int mpt_unload_handler_t(struct mpt_personality *); 172 173 struct mpt_personality 174 { 175 const char *name; 176 uint32_t id; /* Assigned identifier. */ 177 u_int use_count; /* Instances using personality*/ 178 mpt_load_handler_t *load; /* configure personailty */ 179 #define MPT_PERS_FIRST_HANDLER(pers) (&(pers)->load) 180 mpt_probe_handler_t *probe; /* configure personailty */ 181 mpt_attach_handler_t *attach; /* initialize device instance */ 182 mpt_event_handler_t *event; /* Handle MPI event. */ 183 mpt_reset_handler_t *reset; /* Re-init after reset. */ 184 mpt_shutdown_handler_t *shutdown; /* Shutdown instance. */ 185 mpt_detach_handler_t *detach; /* release device instance */ 186 mpt_unload_handler_t *unload; /* Shutdown personality */ 187 #define MPT_PERS_LAST_HANDLER(pers) (&(pers)->unload) 188 }; 189 190 int mpt_modevent(module_t, int, void *); 191 192 /* Maximum supported number of personalities. */ 193 #define MPT_MAX_PERSONALITIES (15) 194 195 #define MPT_PERSONALITY_DEPEND(name, dep, vmin, vpref, vmax) \ 196 MODULE_DEPEND(name, dep, vmin, vpref, vmax) 197 198 #define DECLARE_MPT_PERSONALITY(name, order) \ 199 static moduledata_t name##_mod = { \ 200 #name, mpt_modevent, &name##_personality \ 201 }; \ 202 DECLARE_MODULE(name, name##_mod, SI_SUB_DRIVERS, order); \ 203 MODULE_VERSION(name, 1); \ 204 MPT_PERSONALITY_DEPEND(name, mpt_core, 1, 1, 1) 205 206 /******************************* Bus DMA Support ******************************/ 207 /* XXX Need to update bus_dmamap_sync to take a range argument. */ 208 #define bus_dmamap_sync_range(dma_tag, dmamap, offset, len, op) \ 209 bus_dmamap_sync(dma_tag, dmamap, op) 210 211 #if __FreeBSD_version >= 501102 212 #define mpt_dma_tag_create(mpt, parent_tag, alignment, boundary, \ 213 lowaddr, highaddr, filter, filterarg, \ 214 maxsize, nsegments, maxsegsz, flags, \ 215 dma_tagp) \ 216 bus_dma_tag_create(parent_tag, alignment, boundary, \ 217 lowaddr, highaddr, filter, filterarg, \ 218 maxsize, nsegments, maxsegsz, flags, \ 219 busdma_lock_mutex, &Giant, \ 220 dma_tagp) 221 #else 222 #define mpt_dma_tag_create(mpt, parent_tag, alignment, boundary, \ 223 lowaddr, highaddr, filter, filterarg, \ 224 maxsize, nsegments, maxsegsz, flags, \ 225 dma_tagp) \ 226 bus_dma_tag_create(parent_tag, alignment, boundary, \ 227 lowaddr, highaddr, filter, filterarg, \ 228 maxsize, nsegments, maxsegsz, flags, \ 229 dma_tagp) 230 #endif 231 232 struct mpt_map_info { 233 struct mpt_softc *mpt; 234 int error; 235 uint32_t phys; 236 }; 237 238 void mpt_map_rquest(void *, bus_dma_segment_t *, int, int); 239 240 /**************************** Kernel Thread Support ***************************/ 241 #if __FreeBSD_version > 500005 242 #define mpt_kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) \ 243 kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) 244 #else 245 #define mpt_kthread_create(func, farg, proc_ptr, flags, stackpgs, fmtstr, arg) \ 246 kthread_create(func, farg, proc_ptr, fmtstr, arg) 247 #endif 248 249 /****************************** Timer Facilities ******************************/ 250 #if __FreeBSD_version > 500000 251 #define mpt_callout_init(c) callout_init(c, /*mpsafe*/0); 252 #else 253 #define mpt_callout_init(c) callout_init(c); 254 #endif 255 256 /********************************** Endianess *********************************/ 257 static __inline uint64_t 258 u64toh(U64 s) 259 { 260 uint64_t result; 261 262 result = le32toh(s.Low); 263 result |= ((uint64_t)le32toh(s.High)) << 32; 264 return (result); 265 } 266 267 /**************************** MPI Transaction State ***************************/ 268 typedef enum { 269 REQ_STATE_FREE = 0x00, 270 REQ_STATE_ALLOCATED = 0x01, 271 REQ_STATE_QUEUED = 0x02, 272 REQ_STATE_DONE = 0x04, 273 REQ_STATE_TIMEDOUT = 0x08, 274 REQ_STATE_NEED_WAKEUP = 0x10, 275 REQ_STATE_MASK = 0xFF 276 } mpt_req_state_t; 277 278 struct req_entry { 279 TAILQ_ENTRY(req_entry) links; /* Pointer to next in list */ 280 mpt_req_state_t state; /* Request State Information */ 281 uint16_t index; /* Index of this entry */ 282 uint16_t IOCStatus; /* Completion status */ 283 union ccb *ccb; /* CAM request */ 284 void *req_vbuf; /* Virtual Address of Entry */ 285 void *sense_vbuf; /* Virtual Address of sense data */ 286 bus_addr_t req_pbuf; /* Physical Address of Entry */ 287 bus_addr_t sense_pbuf; /* Physical Address of sense data */ 288 bus_dmamap_t dmap; /* DMA map for data buffer */ 289 struct req_entry *chain; /* for SGE overallocations */ 290 }; 291 292 /**************************** Handler Registration ****************************/ 293 /* 294 * Global table of registered reply handlers. The 295 * handler is indicated by byte 3 of the request 296 * index submitted to the IOC. This allows the 297 * driver core to perform generic processing without 298 * any knowledge of per-personality behavior. 299 * 300 * MPT_NUM_REPLY_HANDLERS must be a power of 2 301 * to allow the easy generation of a mask. 302 * 303 * The handler offsets used by the core are hard coded 304 * allowing faster code generation when assigning a handler 305 * to a request. All "personalities" must use the 306 * the handler registration mechanism. 307 * 308 * The IOC handlers that are rarely executed are placed 309 * at the tail of the table to make it more likely that 310 * all commonly executed handlers fit in a single cache 311 * line. 312 */ 313 #define MPT_NUM_REPLY_HANDLERS (16) 314 #define MPT_REPLY_HANDLER_EVENTS MPT_CBI_TO_HID(0) 315 #define MPT_REPLY_HANDLER_CONFIG MPT_CBI_TO_HID(MPT_NUM_REPLY_HANDLERS-1) 316 #define MPT_REPLY_HANDLER_HANDSHAKE MPT_CBI_TO_HID(MPT_NUM_REPLY_HANDLERS-2) 317 typedef int mpt_reply_handler_t(struct mpt_softc *mpt, request_t *request, 318 MSG_DEFAULT_REPLY *reply_frame); 319 typedef union { 320 mpt_reply_handler_t *reply_handler; 321 } mpt_handler_t; 322 323 typedef enum { 324 MPT_HANDLER_REPLY, 325 MPT_HANDLER_EVENT, 326 MPT_HANDLER_RESET, 327 MPT_HANDLER_SHUTDOWN 328 } mpt_handler_type; 329 330 struct mpt_handler_record 331 { 332 LIST_ENTRY(mpt_handler_record) links; 333 mpt_handler_t handler; 334 }; 335 336 LIST_HEAD(mpt_handler_list, mpt_handler_record); 337 338 /* 339 * The handler_id is currently unused but would contain the 340 * handler ID used in the MsgContext field to allow direction 341 * of replies to the handler. Registrations that don't require 342 * a handler id can pass in NULL for the handler_id. 343 * 344 * Deregistrations for handlers without a handler id should 345 * pass in MPT_HANDLER_ID_NONE. 346 */ 347 #define MPT_HANDLER_ID_NONE (0xFFFFFFFF) 348 int mpt_register_handler(struct mpt_softc *, mpt_handler_type, 349 mpt_handler_t, uint32_t *); 350 int mpt_deregister_handler(struct mpt_softc *, mpt_handler_type, 351 mpt_handler_t, uint32_t); 352 353 /******************* Per-Controller Instance Data Structures ******************/ 354 TAILQ_HEAD(req_queue, req_entry); 355 356 /* Structure for saving proper values for modifyable PCI config registers */ 357 struct mpt_pci_cfg { 358 uint16_t Command; 359 uint16_t LatencyTimer_LineSize; 360 uint32_t IO_BAR; 361 uint32_t Mem0_BAR[2]; 362 uint32_t Mem1_BAR[2]; 363 uint32_t ROM_BAR; 364 uint8_t IntLine; 365 uint32_t PMCSR; 366 }; 367 368 typedef enum { 369 MPT_RVF_NONE = 0x0, 370 MPT_RVF_ACTIVE = 0x1, 371 MPT_RVF_ANNOUNCED = 0x2, 372 MPT_RVF_UP2DATE = 0x4, 373 MPT_RVF_REFERENCED = 0x8, 374 MPT_RVF_WCE_CHANGED = 0x10 375 } mpt_raid_volume_flags; 376 377 struct mpt_raid_volume { 378 CONFIG_PAGE_RAID_VOL_0 *config_page; 379 MPI_RAID_VOL_INDICATOR sync_progress; 380 mpt_raid_volume_flags flags; 381 u_int quieced_disks; 382 }; 383 384 typedef enum { 385 MPT_RDF_NONE = 0x00, 386 MPT_RDF_ACTIVE = 0x01, 387 MPT_RDF_ANNOUNCED = 0x02, 388 MPT_RDF_UP2DATE = 0x04, 389 MPT_RDF_REFERENCED = 0x08, 390 MPT_RDF_QUIESCING = 0x10, 391 MPT_RDF_QUIESCED = 0x20 392 } mpt_raid_disk_flags; 393 394 struct mpt_raid_disk { 395 CONFIG_PAGE_RAID_PHYS_DISK_0 config_page; 396 struct mpt_raid_volume *volume; 397 u_int member_number; 398 u_int pass_thru_active; 399 mpt_raid_disk_flags flags; 400 }; 401 402 struct mpt_evtf_record { 403 MSG_EVENT_NOTIFY_REPLY reply; 404 uint32_t context; 405 LIST_ENTRY(mpt_evtf_record) links; 406 }; 407 408 LIST_HEAD(mpt_evtf_list, mpt_evtf_record); 409 410 struct mpt_softc { 411 device_t dev; 412 #if __FreeBSD_version < 500000 413 int mpt_splsaved; 414 uint32_t mpt_islocked; 415 #else 416 struct mtx mpt_lock; 417 #endif 418 uint32_t mpt_pers_mask; 419 uint32_t : 14, 420 is_sas : 1, 421 raid_mwce_set : 1, 422 getreqwaiter : 1, 423 shutdwn_raid : 1, 424 shutdwn_recovery: 1, 425 unit : 8, 426 outofbeer : 1, 427 mpt_locksetup : 1, 428 disabled : 1, 429 is_fc : 1, 430 bus : 1; /* FC929/1030 have two busses */ 431 432 u_int verbose; 433 434 /* 435 * IOC Facts 436 */ 437 uint16_t mpt_global_credits; 438 uint16_t request_frame_size; 439 uint8_t mpt_max_devices; 440 uint8_t mpt_max_buses; 441 uint8_t ioc_facts_flags; 442 443 /* 444 * Port Facts 445 * XXX - Add multi-port support!. 446 */ 447 uint16_t mpt_ini_id; 448 uint16_t mpt_port_type; 449 uint16_t mpt_proto_flags; 450 451 /* 452 * Device Configuration Information 453 */ 454 union { 455 struct mpt_spi_cfg { 456 CONFIG_PAGE_SCSI_PORT_0 _port_page0; 457 CONFIG_PAGE_SCSI_PORT_1 _port_page1; 458 CONFIG_PAGE_SCSI_PORT_2 _port_page2; 459 CONFIG_PAGE_SCSI_DEVICE_0 _dev_page0[16]; 460 CONFIG_PAGE_SCSI_DEVICE_1 _dev_page1[16]; 461 uint16_t _tag_enable; 462 uint16_t _disc_enable; 463 uint16_t _update_params0; 464 uint16_t _update_params1; 465 } spi; 466 #define mpt_port_page0 cfg.spi._port_page0 467 #define mpt_port_page1 cfg.spi._port_page1 468 #define mpt_port_page2 cfg.spi._port_page2 469 #define mpt_dev_page0 cfg.spi._dev_page0 470 #define mpt_dev_page1 cfg.spi._dev_page1 471 #define mpt_tag_enable cfg.spi._tag_enable 472 #define mpt_disc_enable cfg.spi._disc_enable 473 #define mpt_update_params0 cfg.spi._update_params0 474 #define mpt_update_params1 cfg.spi._update_params1 475 struct mpi_fc_cfg { 476 uint8_t nada; 477 } fc; 478 } cfg; 479 480 /* Controller Info */ 481 CONFIG_PAGE_IOC_2 * ioc_page2; 482 CONFIG_PAGE_IOC_3 * ioc_page3; 483 484 /* Raid Data */ 485 struct mpt_raid_volume* raid_volumes; 486 struct mpt_raid_disk* raid_disks; 487 u_int raid_max_volumes; 488 u_int raid_max_disks; 489 u_int raid_page0_len; 490 u_int raid_wakeup; 491 u_int raid_rescan; 492 u_int raid_resync_rate; 493 u_int raid_mwce_setting; 494 u_int raid_queue_depth; 495 u_int raid_nonopt_volumes; 496 struct proc *raid_thread; 497 struct callout raid_timer; 498 499 /* 500 * PCI Hardware info 501 */ 502 struct resource * pci_irq; /* Interrupt map for chip */ 503 void * ih; /* Interupt handle */ 504 struct mpt_pci_cfg pci_cfg; /* saved PCI conf registers */ 505 506 /* 507 * DMA Mapping Stuff 508 */ 509 struct resource * pci_reg; /* Register map for chip */ 510 int pci_mem_rid; /* Resource ID */ 511 bus_space_tag_t pci_st; /* Bus tag for registers */ 512 bus_space_handle_t pci_sh; /* Bus handle for registers */ 513 /* PIO versions of above. */ 514 int pci_pio_rid; 515 struct resource * pci_pio_reg; 516 bus_space_tag_t pci_pio_st; 517 bus_space_handle_t pci_pio_sh; 518 519 bus_dma_tag_t parent_dmat; /* DMA tag for parent PCI bus */ 520 bus_dma_tag_t reply_dmat; /* DMA tag for reply memory */ 521 bus_dmamap_t reply_dmap; /* DMA map for reply memory */ 522 uint8_t *reply; /* KVA of reply memory */ 523 bus_addr_t reply_phys; /* BusAddr of reply memory */ 524 525 bus_dma_tag_t buffer_dmat; /* DMA tag for buffers */ 526 bus_dma_tag_t request_dmat; /* DMA tag for request memroy */ 527 bus_dmamap_t request_dmap; /* DMA map for request memroy */ 528 uint8_t *request; /* KVA of Request memory */ 529 bus_addr_t request_phys; /* BusADdr of request memory */ 530 531 uint32_t max_seg_cnt; /* calculated after IOC facts */ 532 533 /* 534 * Hardware management 535 */ 536 u_int reset_cnt; 537 538 /* 539 * CAM && Software Management 540 */ 541 request_t *request_pool; 542 struct req_queue request_free_list; 543 struct req_queue request_pending_list; 544 struct req_queue request_timeout_list; 545 546 /* 547 * Deferred frame acks due to resource shortage. 548 */ 549 struct mpt_evtf_list ack_frames; 550 551 552 struct cam_sim *sim; 553 struct cam_path *path; 554 555 struct cam_sim *phydisk_sim; 556 struct cam_path *phydisk_path; 557 558 struct proc *recovery_thread; 559 request_t *tmf_req; 560 561 uint32_t sequence; /* Sequence Number */ 562 uint32_t timeouts; /* timeout count */ 563 uint32_t success; /* successes afer timeout */ 564 565 /* Opposing port in a 929 or 1030, or NULL */ 566 struct mpt_softc * mpt2; 567 568 /* FW Image management */ 569 uint32_t fw_image_size; 570 uint8_t *fw_image; 571 bus_dma_tag_t fw_dmat; /* DMA tag for firmware image */ 572 bus_dmamap_t fw_dmap; /* DMA map for firmware image */ 573 bus_addr_t fw_phys; /* BusAddr of request memory */ 574 575 /* Shutdown Event Handler. */ 576 eventhandler_tag eh; 577 578 TAILQ_ENTRY(mpt_softc) links; 579 }; 580 581 /***************************** Locking Primatives *****************************/ 582 #if __FreeBSD_version < 500000 583 #define MPT_IFLAGS INTR_TYPE_CAM 584 #define MPT_LOCK(mpt) mpt_lockspl(mpt) 585 #define MPT_UNLOCK(mpt) mpt_unlockspl(mpt) 586 #define MPTLOCK_2_CAMLOCK MPT_UNLOCK 587 #define CAMLOCK_2_MPTLOCK MPT_LOCK 588 #define MPT_LOCK_SETUP(mpt) 589 #define MPT_LOCK_DESTROY(mpt) 590 591 static __inline void mpt_lockspl(struct mpt_softc *mpt); 592 static __inline void mpt_unlockspl(struct mpt_softc *mpt); 593 594 static __inline void 595 mpt_lockspl(struct mpt_softc *mpt) 596 { 597 int s; 598 599 s = splcam(); 600 if (mpt->mpt_islocked++ == 0) { 601 mpt->mpt_splsaved = s; 602 } else { 603 splx(s); 604 panic("Recursed lock with mask: 0x%x\n", s); 605 } 606 } 607 608 static __inline void 609 mpt_unlockspl(struct mpt_softc *mpt) 610 { 611 if (mpt->mpt_islocked) { 612 if (--mpt->mpt_islocked == 0) { 613 splx(mpt->mpt_splsaved); 614 } 615 } else 616 panic("Negative lock count\n"); 617 } 618 619 static __inline int 620 mpt_sleep(struct mpt_softc *mpt, void *ident, int priority, 621 const char *wmesg, int timo) 622 { 623 int saved_cnt; 624 int saved_spl; 625 int error; 626 627 KASSERT(mpt->mpt_islocked <= 1, ("Invalid lock count on tsleep")); 628 saved_cnt = mpt->mpt_islocked; 629 saved_spl = mpt->mpt_splsaved; 630 mpt->mpt_islocked = 0; 631 error = tsleep(ident, priority, wmesg, timo); 632 KASSERT(mpt->mpt_islocked = 0, ("Invalid lock count on wakeup")); 633 mpt->mpt_islocked = saved_cnt; 634 mpt->mpt_splsaved = saved_spl; 635 return (error); 636 } 637 638 #else 639 #ifdef LOCKING_WORKED_AS_IT_SHOULD 640 #error "Shouldn't Be Here!" 641 #define MPT_IFLAGS INTR_TYPE_CAM | INTR_ENTROPY | INTR_MPSAFE 642 #define MPT_LOCK_SETUP(mpt) \ 643 mtx_init(&mpt->mpt_lock, "mpt", NULL, MTX_DEF); \ 644 mpt->mpt_locksetup = 1 645 #define MPT_LOCK_DESTROY(mpt) \ 646 if (mpt->mpt_locksetup) { \ 647 mtx_destroy(&mpt->mpt_lock); \ 648 mpt->mpt_locksetup = 0; \ 649 } 650 651 #define MPT_LOCK(mpt) mtx_lock(&(mpt)->mpt_lock) 652 #define MPT_UNLOCK(mpt) mtx_unlock(&(mpt)->mpt_lock) 653 #define MPTLOCK_2_CAMLOCK(mpt) \ 654 mtx_unlock(&(mpt)->mpt_lock); mtx_lock(&Giant) 655 #define CAMLOCK_2_MPTLOCK(mpt) \ 656 mtx_unlock(&Giant); mtx_lock(&(mpt)->mpt_lock) 657 #define mpt_sleep(mpt, ident, priority, wmesg, timo) \ 658 msleep(ident, &(mpt)->mpt_lock, priority, wmesg, timo) 659 #else 660 #define MPT_IFLAGS INTR_TYPE_CAM | INTR_ENTROPY 661 #define MPT_LOCK_SETUP(mpt) do { } while (0) 662 #define MPT_LOCK_DESTROY(mpt) do { } while (0) 663 #define MPT_LOCK(mpt) do { } while (0) 664 #define MPT_UNLOCK(mpt) do { } while (0) 665 #define MPTLOCK_2_CAMLOCK(mpt) do { } while (0) 666 #define CAMLOCK_2_MPTLOCK(mpt) do { } while (0) 667 #define mpt_sleep(mpt, ident, priority, wmesg, timo) \ 668 tsleep(ident, priority, wmesg, timo) 669 #endif 670 #endif 671 672 /******************************* Register Access ******************************/ 673 static __inline void mpt_write(struct mpt_softc *, size_t, uint32_t); 674 static __inline uint32_t mpt_read(struct mpt_softc *, int); 675 static __inline void mpt_pio_write(struct mpt_softc *, size_t, uint32_t); 676 static __inline uint32_t mpt_pio_read(struct mpt_softc *, int); 677 678 static __inline void 679 mpt_write(struct mpt_softc *mpt, size_t offset, uint32_t val) 680 { 681 bus_space_write_4(mpt->pci_st, mpt->pci_sh, offset, val); 682 } 683 684 static __inline uint32_t 685 mpt_read(struct mpt_softc *mpt, int offset) 686 { 687 return (bus_space_read_4(mpt->pci_st, mpt->pci_sh, offset)); 688 } 689 690 /* 691 * Some operations (e.g. diagnostic register writes while the ARM proccessor 692 * is disabled), must be performed using "PCI pio" operations. On non-PCI 693 * busses, these operations likely map to normal register accesses. 694 */ 695 static __inline void 696 mpt_pio_write(struct mpt_softc *mpt, size_t offset, uint32_t val) 697 { 698 bus_space_write_4(mpt->pci_pio_st, mpt->pci_pio_sh, offset, val); 699 } 700 701 static __inline uint32_t 702 mpt_pio_read(struct mpt_softc *mpt, int offset) 703 { 704 return (bus_space_read_4(mpt->pci_pio_st, mpt->pci_pio_sh, offset)); 705 } 706 /*********************** Reply Frame/Request Management ***********************/ 707 /* Max MPT Reply we are willing to accept (must be power of 2) */ 708 #define MPT_REPLY_SIZE 256 709 710 #define MPT_MAX_REQUESTS(mpt) 512 711 #define MPT_REQUEST_AREA 512 712 #define MPT_SENSE_SIZE 32 /* included in MPT_REQUEST_AREA */ 713 #define MPT_REQ_MEM_SIZE(mpt) (MPT_MAX_REQUESTS(mpt) * MPT_REQUEST_AREA) 714 715 #define MPT_CONTEXT_CB_SHIFT (16) 716 #define MPT_CBI(handle) (handle >> MPT_CONTEXT_CB_SHIFT) 717 #define MPT_CBI_TO_HID(cbi) ((cbi) << MPT_CONTEXT_CB_SHIFT) 718 #define MPT_CONTEXT_TO_CBI(x) \ 719 (((x) >> MPT_CONTEXT_CB_SHIFT) & (MPT_NUM_REPLY_HANDLERS - 1)) 720 #define MPT_CONTEXT_REQI_MASK 0xFFFF 721 #define MPT_CONTEXT_TO_REQI(x) \ 722 ((x) & MPT_CONTEXT_REQI_MASK) 723 724 /* 725 * Convert a 32bit physical address returned from IOC to an 726 * offset into our reply frame memory or the kvm address needed 727 * to access the data. The returned address is only the low 728 * 32 bits, so mask our base physical address accordingly. 729 */ 730 #define MPT_REPLY_BADDR(x) \ 731 (x << 1) 732 #define MPT_REPLY_OTOV(m, i) \ 733 ((void *)(&m->reply[i])) 734 735 #define MPT_DUMP_REPLY_FRAME(mpt, reply_frame) \ 736 do { \ 737 if (mpt->verbose >= MPT_PRT_DEBUG) \ 738 mpt_dump_reply_frame(mpt, reply_frame); \ 739 } while(0) 740 741 static __inline uint32_t mpt_pop_reply_queue(struct mpt_softc *mpt); 742 static __inline void mpt_free_reply(struct mpt_softc *mpt, uint32_t ptr); 743 744 /* 745 * Give the reply buffer back to the IOC after we have 746 * finished processing it. 747 */ 748 static __inline void 749 mpt_free_reply(struct mpt_softc *mpt, uint32_t ptr) 750 { 751 mpt_write(mpt, MPT_OFFSET_REPLY_Q, ptr); 752 } 753 754 /* Get a reply from the IOC */ 755 static __inline uint32_t 756 mpt_pop_reply_queue(struct mpt_softc *mpt) 757 { 758 return mpt_read(mpt, MPT_OFFSET_REPLY_Q); 759 } 760 761 void mpt_complete_request_chain(struct mpt_softc *mpt, 762 struct req_queue *chain, u_int iocstatus); 763 /************************** Scatter Gather Managment **************************/ 764 /* MPT_RQSL- size of request frame, in bytes */ 765 #define MPT_RQSL(mpt) (mpt->request_frame_size << 2) 766 767 /* MPT_NSGL- how many SG entries can fit in a request frame size */ 768 #define MPT_NSGL(mpt) (MPT_RQSL(mpt) / sizeof (SGE_IO_UNION)) 769 770 /* MPT_NRFM- how many request frames can fit in each request alloc we make */ 771 #define MPT_NRFM(mpt) (MPT_REQUEST_AREA / MPT_RQSL(mpt)) 772 773 /* 774 * MPT_NSGL_FIRST- # of SG elements that can fit after 775 * an I/O request but still within the request frame. 776 * Do this safely based upon SGE_IO_UNION. 777 * 778 * Note that the first element is *within* the SCSI request. 779 */ 780 #define MPT_NSGL_FIRST(mpt) \ 781 ((MPT_RQSL(mpt) - sizeof (MSG_SCSI_IO_REQUEST) + sizeof (SGE_IO_UNION)) / \ 782 sizeof (SGE_IO_UNION)) 783 784 /***************************** IOC Initialization *****************************/ 785 int mpt_reset(struct mpt_softc *, int /*reinit*/); 786 787 /****************************** Debugging/Logging *****************************/ 788 typedef struct mpt_decode_entry { 789 char *name; 790 u_int value; 791 u_int mask; 792 } mpt_decode_entry_t; 793 794 int mpt_decode_value(mpt_decode_entry_t *table, u_int num_entries, 795 const char *name, u_int value, u_int *cur_column, 796 u_int wrap_point); 797 798 enum { 799 MPT_PRT_ALWAYS, 800 MPT_PRT_FATAL, 801 MPT_PRT_ERROR, 802 MPT_PRT_WARN, 803 MPT_PRT_INFO, 804 MPT_PRT_DEBUG, 805 MPT_PRT_TRACE, 806 MPT_PRT_NONE=100 807 }; 808 809 #define mpt_lprt(mpt, level, ...) \ 810 do { \ 811 if (level <= (mpt)->verbose) \ 812 mpt_prt(mpt, __VA_ARGS__); \ 813 } while (0) 814 815 #define mpt_lprtc(mpt, level, ...) \ 816 do { \ 817 if (level <= (mpt)->debug_level) \ 818 mpt_prtc(mpt, __VA_ARGS__); \ 819 } while (0) 820 821 void mpt_prt(struct mpt_softc *, const char *, ...); 822 void mpt_prtc(struct mpt_softc *, const char *, ...); 823 824 /**************************** Unclassified Routines ***************************/ 825 void mpt_send_cmd(struct mpt_softc *mpt, request_t *req); 826 int mpt_recv_handshake_reply(struct mpt_softc *mpt, 827 size_t reply_len, void *reply); 828 int mpt_wait_req(struct mpt_softc *mpt, request_t *req, 829 mpt_req_state_t state, mpt_req_state_t mask, 830 int sleep_ok, int time_ms); 831 void mpt_enable_ints(struct mpt_softc *mpt); 832 void mpt_disable_ints(struct mpt_softc *mpt); 833 int mpt_attach(struct mpt_softc *mpt); 834 int mpt_shutdown(struct mpt_softc *mpt); 835 int mpt_detach(struct mpt_softc *mpt); 836 int mpt_send_handshake_cmd(struct mpt_softc *mpt, 837 size_t len, void *cmd); 838 request_t * mpt_get_request(struct mpt_softc *mpt, int sleep_ok); 839 void mpt_free_request(struct mpt_softc *mpt, request_t *req); 840 void mpt_intr(void *arg); 841 void mpt_check_doorbell(struct mpt_softc *mpt); 842 void mpt_dump_reply_frame(struct mpt_softc *mpt, 843 MSG_DEFAULT_REPLY *reply_frame); 844 845 void mpt_set_config_regs(struct mpt_softc *); 846 int mpt_issue_cfg_req(struct mpt_softc */*mpt*/, request_t */*req*/, 847 u_int /*Action*/, u_int /*PageVersion*/, 848 u_int /*PageLength*/, u_int /*PageNumber*/, 849 u_int /*PageType*/, uint32_t /*PageAddress*/, 850 bus_addr_t /*addr*/, bus_size_t/*len*/, 851 int /*sleep_ok*/, int /*timeout_ms*/); 852 int mpt_read_cfg_header(struct mpt_softc *, int /*PageType*/, 853 int /*PageNumber*/, 854 uint32_t /*PageAddress*/, 855 CONFIG_PAGE_HEADER *, 856 int /*sleep_ok*/, int /*timeout_ms*/); 857 int mpt_read_cfg_page(struct mpt_softc *t, int /*Action*/, 858 uint32_t /*PageAddress*/, 859 CONFIG_PAGE_HEADER *, size_t /*len*/, 860 int /*sleep_ok*/, int /*timeout_ms*/); 861 int mpt_write_cfg_page(struct mpt_softc *, int /*Action*/, 862 uint32_t /*PageAddress*/, 863 CONFIG_PAGE_HEADER *, size_t /*len*/, 864 int /*sleep_ok*/, int /*timeout_ms*/); 865 static __inline int 866 mpt_read_cur_cfg_page(struct mpt_softc *mpt, uint32_t PageAddress, 867 CONFIG_PAGE_HEADER *hdr, size_t len, 868 int sleep_ok, int timeout_ms) 869 { 870 return (mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT, 871 PageAddress, hdr, len, sleep_ok, timeout_ms)); 872 } 873 874 static __inline int 875 mpt_write_cur_cfg_page(struct mpt_softc *mpt, uint32_t PageAddress, 876 CONFIG_PAGE_HEADER *hdr, size_t len, int sleep_ok, 877 int timeout_ms) 878 { 879 return (mpt_write_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT, 880 PageAddress, hdr, len, sleep_ok, 881 timeout_ms)); 882 } 883 884 /* mpt_debug.c functions */ 885 void mpt_print_reply(void *vmsg); 886 void mpt_print_db(uint32_t mb); 887 void mpt_print_config_reply(void *vmsg); 888 char *mpt_ioc_diag(uint32_t diag); 889 void mpt_req_state(mpt_req_state_t state); 890 void mpt_print_config_request(void *vmsg); 891 void mpt_print_request(void *vmsg); 892 void mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *msg); 893 void mpt_dump_sgl(SGE_IO_UNION *se, int offset); 894 #endif /* _MPT_H_ */ 895