1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2011-2015 LSI Corp. 5 * Copyright (c) 2013-2015 Avago Technologies 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 30 */ 31 32 #include <sys/cdefs.h> 33 __FBSDID("$FreeBSD$"); 34 35 /* TODO Move headers to mpsvar */ 36 #include <sys/types.h> 37 #include <sys/param.h> 38 #include <sys/lock.h> 39 #include <sys/mutex.h> 40 #include <sys/systm.h> 41 #include <sys/kernel.h> 42 #include <sys/malloc.h> 43 #include <sys/kthread.h> 44 #include <sys/taskqueue.h> 45 #include <sys/bus.h> 46 #include <sys/endian.h> 47 #include <sys/sysctl.h> 48 #include <sys/sbuf.h> 49 #include <sys/eventhandler.h> 50 #include <sys/uio.h> 51 #include <machine/bus.h> 52 #include <machine/resource.h> 53 #include <dev/mps/mpi/mpi2_type.h> 54 #include <dev/mps/mpi/mpi2.h> 55 #include <dev/mps/mpi/mpi2_ioc.h> 56 #include <dev/mps/mpi/mpi2_sas.h> 57 #include <dev/mps/mpi/mpi2_cnfg.h> 58 #include <dev/mps/mpi/mpi2_init.h> 59 #include <dev/mps/mpi/mpi2_tool.h> 60 #include <dev/mps/mps_ioctl.h> 61 #include <dev/mps/mpsvar.h> 62 #include <dev/mps/mps_mapping.h> 63 64 /** 65 * _mapping_clear_map_entry - Clear a particular mapping entry. 66 * @map_entry: map table entry 67 * 68 * Returns nothing. 69 */ 70 static inline void 71 _mapping_clear_map_entry(struct dev_mapping_table *map_entry) 72 { 73 map_entry->physical_id = 0; 74 map_entry->device_info = 0; 75 map_entry->phy_bits = 0; 76 map_entry->dpm_entry_num = MPS_DPM_BAD_IDX; 77 map_entry->dev_handle = 0; 78 map_entry->id = -1; 79 map_entry->missing_count = 0; 80 map_entry->init_complete = 0; 81 map_entry->TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR; 82 } 83 84 /** 85 * _mapping_clear_enc_entry - Clear a particular enclosure table entry. 86 * @enc_entry: enclosure table entry 87 * 88 * Returns nothing. 89 */ 90 static inline void 91 _mapping_clear_enc_entry(struct enc_mapping_table *enc_entry) 92 { 93 enc_entry->enclosure_id = 0; 94 enc_entry->start_index = MPS_MAPTABLE_BAD_IDX; 95 enc_entry->phy_bits = 0; 96 enc_entry->dpm_entry_num = MPS_DPM_BAD_IDX; 97 enc_entry->enc_handle = 0; 98 enc_entry->num_slots = 0; 99 enc_entry->start_slot = 0; 100 enc_entry->missing_count = 0; 101 enc_entry->removal_flag = 0; 102 enc_entry->skip_search = 0; 103 enc_entry->init_complete = 0; 104 } 105 106 /** 107 * _mapping_commit_enc_entry - write a particular enc entry in DPM page0. 108 * @sc: per adapter object 109 * @enc_entry: enclosure table entry 110 * 111 * Returns 0 for success, non-zero for failure. 112 */ 113 static int 114 _mapping_commit_enc_entry(struct mps_softc *sc, 115 struct enc_mapping_table *et_entry) 116 { 117 Mpi2DriverMap0Entry_t *dpm_entry; 118 struct dev_mapping_table *mt_entry; 119 Mpi2ConfigReply_t mpi_reply; 120 Mpi2DriverMappingPage0_t config_page; 121 122 if (!sc->is_dpm_enable) 123 return 0; 124 125 memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t)); 126 memcpy(&config_page.Header, (u8 *) sc->dpm_pg0, 127 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 128 dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 + 129 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 130 dpm_entry += et_entry->dpm_entry_num; 131 dpm_entry->PhysicalIdentifier.Low = 132 ( 0xFFFFFFFF & et_entry->enclosure_id); 133 dpm_entry->PhysicalIdentifier.High = 134 ( et_entry->enclosure_id >> 32); 135 mt_entry = &sc->mapping_table[et_entry->start_index]; 136 dpm_entry->DeviceIndex = htole16(mt_entry->id); 137 dpm_entry->MappingInformation = et_entry->num_slots; 138 dpm_entry->MappingInformation <<= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT; 139 dpm_entry->MappingInformation |= et_entry->missing_count; 140 dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation); 141 dpm_entry->PhysicalBitsMapping = htole32(et_entry->phy_bits); 142 dpm_entry->Reserved1 = 0; 143 144 mps_dprint(sc, MPS_MAPPING, "%s: Writing DPM entry %d for enclosure.\n", 145 __func__, et_entry->dpm_entry_num); 146 memcpy(&config_page.Entry, (u8 *)dpm_entry, 147 sizeof(Mpi2DriverMap0Entry_t)); 148 if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page, 149 et_entry->dpm_entry_num)) { 150 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Write of DPM " 151 "entry %d for enclosure failed.\n", __func__, 152 et_entry->dpm_entry_num); 153 dpm_entry->MappingInformation = le16toh(dpm_entry-> 154 MappingInformation); 155 dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex); 156 dpm_entry->PhysicalBitsMapping = 157 le32toh(dpm_entry->PhysicalBitsMapping); 158 return -1; 159 } 160 dpm_entry->MappingInformation = le16toh(dpm_entry-> 161 MappingInformation); 162 dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex); 163 dpm_entry->PhysicalBitsMapping = 164 le32toh(dpm_entry->PhysicalBitsMapping); 165 return 0; 166 } 167 168 /** 169 * _mapping_commit_map_entry - write a particular map table entry in DPM page0. 170 * @sc: per adapter object 171 * @mt_entry: mapping table entry 172 * 173 * Returns 0 for success, non-zero for failure. 174 */ 175 176 static int 177 _mapping_commit_map_entry(struct mps_softc *sc, 178 struct dev_mapping_table *mt_entry) 179 { 180 Mpi2DriverMap0Entry_t *dpm_entry; 181 Mpi2ConfigReply_t mpi_reply; 182 Mpi2DriverMappingPage0_t config_page; 183 184 if (!sc->is_dpm_enable) 185 return 0; 186 187 /* 188 * It's possible that this Map Entry points to a BAD DPM index. This 189 * can happen if the Map Entry is a for a missing device and the DPM 190 * entry that was being used by this device is now being used by some 191 * new device. So, check for a BAD DPM index and just return if so. 192 */ 193 if (mt_entry->dpm_entry_num == MPS_DPM_BAD_IDX) { 194 mps_dprint(sc, MPS_MAPPING, "%s: DPM entry location for target " 195 "%d is invalid. DPM will not be written.\n", __func__, 196 mt_entry->id); 197 return 0; 198 } 199 200 memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t)); 201 memcpy(&config_page.Header, (u8 *)sc->dpm_pg0, 202 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 203 dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *) sc->dpm_pg0 + 204 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 205 dpm_entry = dpm_entry + mt_entry->dpm_entry_num; 206 dpm_entry->PhysicalIdentifier.Low = (0xFFFFFFFF & 207 mt_entry->physical_id); 208 dpm_entry->PhysicalIdentifier.High = (mt_entry->physical_id >> 32); 209 dpm_entry->DeviceIndex = htole16(mt_entry->id); 210 dpm_entry->MappingInformation = htole16(mt_entry->missing_count); 211 dpm_entry->PhysicalBitsMapping = 0; 212 dpm_entry->Reserved1 = 0; 213 memcpy(&config_page.Entry, (u8 *)dpm_entry, 214 sizeof(Mpi2DriverMap0Entry_t)); 215 216 mps_dprint(sc, MPS_MAPPING, "%s: Writing DPM entry %d for target %d.\n", 217 __func__, mt_entry->dpm_entry_num, mt_entry->id); 218 if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page, 219 mt_entry->dpm_entry_num)) { 220 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Write of DPM " 221 "entry %d for target %d failed.\n", __func__, 222 mt_entry->dpm_entry_num, mt_entry->id); 223 dpm_entry->MappingInformation = le16toh(dpm_entry-> 224 MappingInformation); 225 dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex); 226 return -1; 227 } 228 229 dpm_entry->MappingInformation = le16toh(dpm_entry->MappingInformation); 230 dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex); 231 return 0; 232 } 233 234 /** 235 * _mapping_get_ir_maprange - get start and end index for IR map range. 236 * @sc: per adapter object 237 * @start_idx: place holder for start index 238 * @end_idx: place holder for end index 239 * 240 * The IR volumes can be mapped either at start or end of the mapping table 241 * this function gets the detail of where IR volume mapping starts and ends 242 * in the device mapping table 243 * 244 * Returns nothing. 245 */ 246 static void 247 _mapping_get_ir_maprange(struct mps_softc *sc, u32 *start_idx, u32 *end_idx) 248 { 249 u16 volume_mapping_flags; 250 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 251 252 volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) & 253 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; 254 if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) { 255 *start_idx = 0; 256 if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0) 257 *start_idx = 1; 258 } else 259 *start_idx = sc->max_devices - sc->max_volumes; 260 *end_idx = *start_idx + sc->max_volumes - 1; 261 } 262 263 /** 264 * _mapping_get_enc_idx_from_id - get enclosure index from enclosure ID 265 * @sc: per adapter object 266 * @enc_id: enclosure logical identifier 267 * 268 * Returns the index of enclosure entry on success or bad index. 269 */ 270 static u8 271 _mapping_get_enc_idx_from_id(struct mps_softc *sc, u64 enc_id, 272 u64 phy_bits) 273 { 274 struct enc_mapping_table *et_entry; 275 u8 enc_idx = 0; 276 277 for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) { 278 et_entry = &sc->enclosure_table[enc_idx]; 279 if ((et_entry->enclosure_id == le64toh(enc_id)) && 280 (!et_entry->phy_bits || (et_entry->phy_bits & 281 le32toh(phy_bits)))) 282 return enc_idx; 283 } 284 return MPS_ENCTABLE_BAD_IDX; 285 } 286 287 /** 288 * _mapping_get_enc_idx_from_handle - get enclosure index from handle 289 * @sc: per adapter object 290 * @enc_id: enclosure handle 291 * 292 * Returns the index of enclosure entry on success or bad index. 293 */ 294 static u8 295 _mapping_get_enc_idx_from_handle(struct mps_softc *sc, u16 handle) 296 { 297 struct enc_mapping_table *et_entry; 298 u8 enc_idx = 0; 299 300 for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) { 301 et_entry = &sc->enclosure_table[enc_idx]; 302 if (et_entry->missing_count) 303 continue; 304 if (et_entry->enc_handle == handle) 305 return enc_idx; 306 } 307 return MPS_ENCTABLE_BAD_IDX; 308 } 309 310 /** 311 * _mapping_get_high_missing_et_idx - get missing enclosure index 312 * @sc: per adapter object 313 * 314 * Search through the enclosure table and identifies the enclosure entry 315 * with high missing count and returns it's index 316 * 317 * Returns the index of enclosure entry on success or bad index. 318 */ 319 static u8 320 _mapping_get_high_missing_et_idx(struct mps_softc *sc) 321 { 322 struct enc_mapping_table *et_entry; 323 u8 high_missing_count = 0; 324 u8 enc_idx, high_idx = MPS_ENCTABLE_BAD_IDX; 325 326 for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) { 327 et_entry = &sc->enclosure_table[enc_idx]; 328 if ((et_entry->missing_count > high_missing_count) && 329 !et_entry->skip_search) { 330 high_missing_count = et_entry->missing_count; 331 high_idx = enc_idx; 332 } 333 } 334 return high_idx; 335 } 336 337 /** 338 * _mapping_get_high_missing_mt_idx - get missing map table index 339 * @sc: per adapter object 340 * 341 * Search through the map table and identifies the device entry 342 * with high missing count and returns it's index 343 * 344 * Returns the index of map table entry on success or bad index. 345 */ 346 static u32 347 _mapping_get_high_missing_mt_idx(struct mps_softc *sc) 348 { 349 u32 map_idx, high_idx = MPS_MAPTABLE_BAD_IDX; 350 u8 high_missing_count = 0; 351 u32 start_idx, end_idx, start_idx_ir, end_idx_ir; 352 struct dev_mapping_table *mt_entry; 353 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 354 355 start_idx = 0; 356 start_idx_ir = 0; 357 end_idx_ir = 0; 358 end_idx = sc->max_devices; 359 if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0) 360 start_idx = 1; 361 if (sc->ir_firmware) { 362 _mapping_get_ir_maprange(sc, &start_idx_ir, &end_idx_ir); 363 if (start_idx == start_idx_ir) 364 start_idx = end_idx_ir + 1; 365 else 366 end_idx = start_idx_ir; 367 } 368 mt_entry = &sc->mapping_table[start_idx]; 369 for (map_idx = start_idx; map_idx < end_idx; map_idx++, mt_entry++) { 370 if (mt_entry->missing_count > high_missing_count) { 371 high_missing_count = mt_entry->missing_count; 372 high_idx = map_idx; 373 } 374 } 375 return high_idx; 376 } 377 378 /** 379 * _mapping_get_ir_mt_idx_from_wwid - get map table index from volume WWID 380 * @sc: per adapter object 381 * @wwid: world wide unique ID of the volume 382 * 383 * Returns the index of map table entry on success or bad index. 384 */ 385 static u32 386 _mapping_get_ir_mt_idx_from_wwid(struct mps_softc *sc, u64 wwid) 387 { 388 u32 start_idx, end_idx, map_idx; 389 struct dev_mapping_table *mt_entry; 390 391 _mapping_get_ir_maprange(sc, &start_idx, &end_idx); 392 mt_entry = &sc->mapping_table[start_idx]; 393 for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) 394 if (mt_entry->physical_id == wwid) 395 return map_idx; 396 397 return MPS_MAPTABLE_BAD_IDX; 398 } 399 400 /** 401 * _mapping_get_mt_idx_from_id - get map table index from a device ID 402 * @sc: per adapter object 403 * @dev_id: device identifer (SAS Address) 404 * 405 * Returns the index of map table entry on success or bad index. 406 */ 407 static u32 408 _mapping_get_mt_idx_from_id(struct mps_softc *sc, u64 dev_id) 409 { 410 u32 map_idx; 411 struct dev_mapping_table *mt_entry; 412 413 for (map_idx = 0; map_idx < sc->max_devices; map_idx++) { 414 mt_entry = &sc->mapping_table[map_idx]; 415 if (mt_entry->physical_id == dev_id) 416 return map_idx; 417 } 418 return MPS_MAPTABLE_BAD_IDX; 419 } 420 421 /** 422 * _mapping_get_ir_mt_idx_from_handle - get map table index from volume handle 423 * @sc: per adapter object 424 * @wwid: volume device handle 425 * 426 * Returns the index of map table entry on success or bad index. 427 */ 428 static u32 429 _mapping_get_ir_mt_idx_from_handle(struct mps_softc *sc, u16 volHandle) 430 { 431 u32 start_idx, end_idx, map_idx; 432 struct dev_mapping_table *mt_entry; 433 434 _mapping_get_ir_maprange(sc, &start_idx, &end_idx); 435 mt_entry = &sc->mapping_table[start_idx]; 436 for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) 437 if (mt_entry->dev_handle == volHandle) 438 return map_idx; 439 440 return MPS_MAPTABLE_BAD_IDX; 441 } 442 443 /** 444 * _mapping_get_mt_idx_from_handle - get map table index from handle 445 * @sc: per adapter object 446 * @dev_id: device handle 447 * 448 * Returns the index of map table entry on success or bad index. 449 */ 450 static u32 451 _mapping_get_mt_idx_from_handle(struct mps_softc *sc, u16 handle) 452 { 453 u32 map_idx; 454 struct dev_mapping_table *mt_entry; 455 456 for (map_idx = 0; map_idx < sc->max_devices; map_idx++) { 457 mt_entry = &sc->mapping_table[map_idx]; 458 if (mt_entry->dev_handle == handle) 459 return map_idx; 460 } 461 return MPS_MAPTABLE_BAD_IDX; 462 } 463 464 /** 465 * _mapping_get_free_ir_mt_idx - get first free index for a volume 466 * @sc: per adapter object 467 * 468 * Search through mapping table for free index for a volume and if no free 469 * index then looks for a volume with high mapping index 470 * 471 * Returns the index of map table entry on success or bad index. 472 */ 473 static u32 474 _mapping_get_free_ir_mt_idx(struct mps_softc *sc) 475 { 476 u8 high_missing_count = 0; 477 u32 start_idx, end_idx, map_idx; 478 u32 high_idx = MPS_MAPTABLE_BAD_IDX; 479 struct dev_mapping_table *mt_entry; 480 481 /* 482 * The IN_USE flag should be clear if the entry is available to use. 483 * This flag is cleared on initialization and and when a volume is 484 * deleted. All other times this flag should be set. If, for some 485 * reason, a free entry cannot be found, look for the entry with the 486 * highest missing count just in case there is one. 487 */ 488 _mapping_get_ir_maprange(sc, &start_idx, &end_idx); 489 490 mt_entry = &sc->mapping_table[start_idx]; 491 for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) { 492 if (!(mt_entry->device_info & MPS_MAP_IN_USE)) 493 return map_idx; 494 495 if (mt_entry->missing_count > high_missing_count) { 496 high_missing_count = mt_entry->missing_count; 497 high_idx = map_idx; 498 } 499 } 500 501 if (high_idx == MPS_MAPTABLE_BAD_IDX) { 502 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Could not find a " 503 "free entry in the mapping table for a Volume. The mapping " 504 "table is probably corrupt.\n", __func__); 505 } 506 507 return high_idx; 508 } 509 510 /** 511 * _mapping_get_free_mt_idx - get first free index for a device 512 * @sc: per adapter object 513 * @start_idx: offset in the table to start search 514 * 515 * Returns the index of map table entry on success or bad index. 516 */ 517 static u32 518 _mapping_get_free_mt_idx(struct mps_softc *sc, u32 start_idx) 519 { 520 u32 map_idx, max_idx = sc->max_devices; 521 struct dev_mapping_table *mt_entry = &sc->mapping_table[start_idx]; 522 u16 volume_mapping_flags; 523 524 volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) & 525 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; 526 if (sc->ir_firmware && (volume_mapping_flags == 527 MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) 528 max_idx -= sc->max_volumes; 529 530 for (map_idx = start_idx; map_idx < max_idx; map_idx++, mt_entry++) 531 if (!(mt_entry->device_info & (MPS_MAP_IN_USE | 532 MPS_DEV_RESERVED))) 533 return map_idx; 534 535 return MPS_MAPTABLE_BAD_IDX; 536 } 537 538 /** 539 * _mapping_get_dpm_idx_from_id - get DPM index from ID 540 * @sc: per adapter object 541 * @id: volume WWID or enclosure ID or device ID 542 * 543 * Returns the index of DPM entry on success or bad index. 544 */ 545 static u16 546 _mapping_get_dpm_idx_from_id(struct mps_softc *sc, u64 id, u32 phy_bits) 547 { 548 u16 entry_num; 549 uint64_t PhysicalIdentifier; 550 Mpi2DriverMap0Entry_t *dpm_entry; 551 552 dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 + 553 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 554 PhysicalIdentifier = dpm_entry->PhysicalIdentifier.High; 555 PhysicalIdentifier = (PhysicalIdentifier << 32) | 556 dpm_entry->PhysicalIdentifier.Low; 557 for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++, 558 dpm_entry++) 559 if ((id == PhysicalIdentifier) && 560 (!phy_bits || !dpm_entry->PhysicalBitsMapping || 561 (phy_bits & dpm_entry->PhysicalBitsMapping))) 562 return entry_num; 563 564 return MPS_DPM_BAD_IDX; 565 } 566 567 /** 568 * _mapping_get_free_dpm_idx - get first available DPM index 569 * @sc: per adapter object 570 * 571 * Returns the index of DPM entry on success or bad index. 572 */ 573 static u32 574 _mapping_get_free_dpm_idx(struct mps_softc *sc) 575 { 576 u16 entry_num; 577 Mpi2DriverMap0Entry_t *dpm_entry; 578 u16 current_entry = MPS_DPM_BAD_IDX, missing_cnt, high_missing_cnt = 0; 579 u64 physical_id; 580 struct dev_mapping_table *mt_entry; 581 u32 map_idx; 582 583 for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) { 584 dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 + 585 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 586 dpm_entry += entry_num; 587 missing_cnt = dpm_entry->MappingInformation & 588 MPI2_DRVMAP0_MAPINFO_MISSING_MASK; 589 590 /* 591 * If entry is used and not missing, then this entry can't be 592 * used. Look at next one. 593 */ 594 if (sc->dpm_entry_used[entry_num] && !missing_cnt) 595 continue; 596 597 /* 598 * If this entry is not used at all, then the missing count 599 * doesn't matter. Just use this one. Otherwise, keep looking 600 * and make sure the entry with the highest missing count is 601 * used. 602 */ 603 if (!sc->dpm_entry_used[entry_num]) { 604 current_entry = entry_num; 605 break; 606 } 607 if ((current_entry == MPS_DPM_BAD_IDX) || 608 (missing_cnt > high_missing_cnt)) { 609 current_entry = entry_num; 610 high_missing_cnt = missing_cnt; 611 } 612 } 613 614 /* 615 * If an entry has been found to use and it's already marked as used 616 * it means that some device was already using this entry but it's 617 * missing, and that means that the connection between the missing 618 * device's DPM entry and the mapping table needs to be cleared. To do 619 * this, use the Physical ID of the old device still in the DPM entry 620 * to find its mapping table entry, then mark its DPM entry as BAD. 621 */ 622 if ((current_entry != MPS_DPM_BAD_IDX) && 623 sc->dpm_entry_used[current_entry]) { 624 dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 + 625 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 626 dpm_entry += current_entry; 627 physical_id = dpm_entry->PhysicalIdentifier.High; 628 physical_id = (physical_id << 32) | 629 dpm_entry->PhysicalIdentifier.Low; 630 map_idx = _mapping_get_mt_idx_from_id(sc, physical_id); 631 if (map_idx != MPS_MAPTABLE_BAD_IDX) { 632 mt_entry = &sc->mapping_table[map_idx]; 633 mt_entry->dpm_entry_num = MPS_DPM_BAD_IDX; 634 } 635 } 636 return current_entry; 637 } 638 639 /** 640 * _mapping_update_ir_missing_cnt - Updates missing count for a volume 641 * @sc: per adapter object 642 * @map_idx: map table index of the volume 643 * @element: IR configuration change element 644 * @wwid: IR volume ID. 645 * 646 * Updates the missing count in the map table and in the DPM entry for a volume 647 * 648 * Returns nothing. 649 */ 650 static void 651 _mapping_update_ir_missing_cnt(struct mps_softc *sc, u32 map_idx, 652 Mpi2EventIrConfigElement_t *element, u64 wwid) 653 { 654 struct dev_mapping_table *mt_entry; 655 u8 missing_cnt, reason = element->ReasonCode, update_dpm = 1; 656 u16 dpm_idx; 657 Mpi2DriverMap0Entry_t *dpm_entry; 658 659 /* 660 * Depending on the reason code, update the missing count. Always set 661 * the init_complete flag when here, so just do it first. That flag is 662 * used for volumes to make sure that the DPM entry has been updated. 663 * When a volume is deleted, clear the map entry's IN_USE flag so that 664 * the entry can be used again if another volume is created. Also clear 665 * its dev_handle entry so that other functions can't find this volume 666 * by the handle, since it's not defined any longer. 667 */ 668 mt_entry = &sc->mapping_table[map_idx]; 669 mt_entry->init_complete = 1; 670 if ((reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) || 671 (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED)) { 672 mt_entry->missing_count = 0; 673 } else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) { 674 if (mt_entry->missing_count < MPS_MAX_MISSING_COUNT) 675 mt_entry->missing_count++; 676 677 mt_entry->device_info &= ~MPS_MAP_IN_USE; 678 mt_entry->dev_handle = 0; 679 } 680 681 /* 682 * If persistent mapping is enabled, update the DPM with the new missing 683 * count for the volume. If the DPM index is bad, get a free one. If 684 * it's bad for a volume that's being deleted do nothing because that 685 * volume doesn't have a DPM entry. 686 */ 687 if (!sc->is_dpm_enable) 688 return; 689 dpm_idx = mt_entry->dpm_entry_num; 690 if (dpm_idx == MPS_DPM_BAD_IDX) { 691 if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) 692 { 693 mps_dprint(sc, MPS_MAPPING, "%s: Volume being deleted " 694 "is not in DPM so DPM missing count will not be " 695 "updated.\n", __func__); 696 return; 697 } 698 } 699 if (dpm_idx == MPS_DPM_BAD_IDX) 700 dpm_idx = _mapping_get_free_dpm_idx(sc); 701 702 /* 703 * Got the DPM entry for the volume or found a free DPM entry if this is 704 * a new volume. Check if the current information is outdated. 705 */ 706 if (dpm_idx != MPS_DPM_BAD_IDX) { 707 dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 + 708 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 709 dpm_entry += dpm_idx; 710 missing_cnt = dpm_entry->MappingInformation & 711 MPI2_DRVMAP0_MAPINFO_MISSING_MASK; 712 if ((mt_entry->physical_id == 713 le64toh(((u64)dpm_entry->PhysicalIdentifier.High << 32) | 714 (u64)dpm_entry->PhysicalIdentifier.Low)) && (missing_cnt == 715 mt_entry->missing_count)) { 716 mps_dprint(sc, MPS_MAPPING, "%s: DPM entry for volume " 717 "with target ID %d does not require an update.\n", 718 __func__, mt_entry->id); 719 update_dpm = 0; 720 } 721 } 722 723 /* 724 * Update the volume's persistent info if it's new or the ID or missing 725 * count has changed. If a good DPM index has not been found by now, 726 * there is no space left in the DPM table. 727 */ 728 if ((dpm_idx != MPS_DPM_BAD_IDX) && update_dpm) { 729 mps_dprint(sc, MPS_MAPPING, "%s: Update DPM entry for volume " 730 "with target ID %d.\n", __func__, mt_entry->id); 731 732 mt_entry->dpm_entry_num = dpm_idx; 733 dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 + 734 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 735 dpm_entry += dpm_idx; 736 dpm_entry->PhysicalIdentifier.Low = 737 (0xFFFFFFFF & mt_entry->physical_id); 738 dpm_entry->PhysicalIdentifier.High = 739 (mt_entry->physical_id >> 32); 740 dpm_entry->DeviceIndex = map_idx; 741 dpm_entry->MappingInformation = mt_entry->missing_count; 742 dpm_entry->PhysicalBitsMapping = 0; 743 dpm_entry->Reserved1 = 0; 744 sc->dpm_flush_entry[dpm_idx] = 1; 745 sc->dpm_entry_used[dpm_idx] = 1; 746 } else if (dpm_idx == MPS_DPM_BAD_IDX) { 747 mps_dprint(sc, MPS_INFO | MPS_MAPPING, "%s: No space to add an " 748 "entry in the DPM table for volume with target ID %d.\n", 749 __func__, mt_entry->id); 750 } 751 } 752 753 /** 754 * _mapping_add_to_removal_table - add DPM index to the removal table 755 * @sc: per adapter object 756 * @dpm_idx: Index of DPM entry to remove 757 * 758 * Adds a DPM entry number to the removal table. 759 * 760 * Returns nothing. 761 */ 762 static void 763 _mapping_add_to_removal_table(struct mps_softc *sc, u16 dpm_idx) 764 { 765 struct map_removal_table *remove_entry; 766 u32 i; 767 768 /* 769 * This is only used to remove entries from the DPM in the controller. 770 * If DPM is not enabled, just return. 771 */ 772 if (!sc->is_dpm_enable) 773 return; 774 775 /* 776 * Find the first available removal_table entry and add the new entry 777 * there. 778 */ 779 remove_entry = sc->removal_table; 780 781 for (i = 0; i < sc->max_devices; i++, remove_entry++) { 782 if (remove_entry->dpm_entry_num != MPS_DPM_BAD_IDX) 783 continue; 784 785 mps_dprint(sc, MPS_MAPPING, "%s: Adding DPM entry %d to table " 786 "for removal.\n", __func__, dpm_idx); 787 remove_entry->dpm_entry_num = dpm_idx; 788 break; 789 } 790 791 } 792 793 /** 794 * _mapping_update_missing_count - Update missing count for a device 795 * @sc: per adapter object 796 * @topo_change: Topology change event entry 797 * 798 * Increment the missing count in the mapping table for a device that is not 799 * responding. If Persitent Mapping is used, increment the DPM entry as well. 800 * Currently, this function only increments the missing count if the device 801 * goes missing, so after initialization has completed. This means that the 802 * missing count can only go from 0 to 1 here. The missing count is incremented 803 * during initialization as well, so that's where a target's missing count can 804 * go past 1. 805 * 806 * Returns nothing. 807 */ 808 static void 809 _mapping_update_missing_count(struct mps_softc *sc, 810 struct _map_topology_change *topo_change) 811 { 812 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 813 u8 entry; 814 struct _map_phy_change *phy_change; 815 u32 map_idx; 816 struct dev_mapping_table *mt_entry; 817 Mpi2DriverMap0Entry_t *dpm_entry; 818 819 for (entry = 0; entry < topo_change->num_entries; entry++) { 820 phy_change = &topo_change->phy_details[entry]; 821 if (!phy_change->dev_handle || (phy_change->reason != 822 MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)) 823 continue; 824 map_idx = _mapping_get_mt_idx_from_handle(sc, phy_change-> 825 dev_handle); 826 phy_change->is_processed = 1; 827 if (map_idx == MPS_MAPTABLE_BAD_IDX) { 828 mps_dprint(sc, MPS_INFO | MPS_MAPPING, "%s: device is " 829 "already removed from mapping table\n", __func__); 830 continue; 831 } 832 mt_entry = &sc->mapping_table[map_idx]; 833 if (mt_entry->missing_count < MPS_MAX_MISSING_COUNT) 834 mt_entry->missing_count++; 835 836 /* 837 * When using Enc/Slot mapping, when a device is removed, it's 838 * mapping table information should be cleared. Otherwise, the 839 * target ID will be incorrect if this same device is re-added 840 * to a different slot. 841 */ 842 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 843 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 844 _mapping_clear_map_entry(mt_entry); 845 } 846 847 /* 848 * When using device mapping, update the missing count in the 849 * DPM entry, but only if the missing count has changed. 850 */ 851 if (((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 852 MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) && 853 sc->is_dpm_enable && 854 mt_entry->dpm_entry_num != MPS_DPM_BAD_IDX) { 855 dpm_entry = 856 (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 + 857 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 858 dpm_entry += mt_entry->dpm_entry_num; 859 if (dpm_entry->MappingInformation != 860 mt_entry->missing_count) { 861 dpm_entry->MappingInformation = 862 mt_entry->missing_count; 863 sc->dpm_flush_entry[mt_entry->dpm_entry_num] = 864 1; 865 } 866 } 867 } 868 } 869 870 /** 871 * _mapping_find_enc_map_space -find map table entries for enclosure 872 * @sc: per adapter object 873 * @et_entry: enclosure entry 874 * 875 * Search through the mapping table defragment it and provide contiguous 876 * space in map table for a particular enclosure entry 877 * 878 * Returns start index in map table or bad index. 879 */ 880 static u32 881 _mapping_find_enc_map_space(struct mps_softc *sc, 882 struct enc_mapping_table *et_entry) 883 { 884 u16 vol_mapping_flags; 885 u32 skip_count, end_of_table, map_idx, enc_idx; 886 u16 num_found; 887 u32 start_idx = MPS_MAPTABLE_BAD_IDX; 888 struct dev_mapping_table *mt_entry; 889 struct enc_mapping_table *enc_entry; 890 unsigned char done_flag = 0, found_space; 891 u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs); 892 893 skip_count = sc->num_rsvd_entries; 894 num_found = 0; 895 896 vol_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) & 897 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; 898 899 /* 900 * The end of the mapping table depends on where volumes are kept, if 901 * IR is enabled. 902 */ 903 if (!sc->ir_firmware) 904 end_of_table = sc->max_devices; 905 else if (vol_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) 906 end_of_table = sc->max_devices; 907 else 908 end_of_table = sc->max_devices - sc->max_volumes; 909 910 /* 911 * The skip_count is the number of entries that are reserved at the 912 * beginning of the mapping table. But, it does not include the number 913 * of Physical IDs that are reserved for direct attached devices. Look 914 * through the mapping table after these reserved entries to see if 915 * the devices for this enclosure are already mapped. The PHY bit check 916 * is used to make sure that at least one PHY bit is common between the 917 * enclosure and the device that is already mapped. 918 */ 919 mps_dprint(sc, MPS_MAPPING, "%s: Looking for space in the mapping " 920 "table for added enclosure.\n", __func__); 921 for (map_idx = (max_num_phy_ids + skip_count); 922 map_idx < end_of_table; map_idx++) { 923 mt_entry = &sc->mapping_table[map_idx]; 924 if ((et_entry->enclosure_id == mt_entry->physical_id) && 925 (!mt_entry->phy_bits || (mt_entry->phy_bits & 926 et_entry->phy_bits))) { 927 num_found += 1; 928 if (num_found == et_entry->num_slots) { 929 start_idx = (map_idx - num_found) + 1; 930 mps_dprint(sc, MPS_MAPPING, "%s: Found space " 931 "in the mapping for enclosure at map index " 932 "%d.\n", __func__, start_idx); 933 return start_idx; 934 } 935 } else 936 num_found = 0; 937 } 938 939 /* 940 * If the enclosure's devices are not mapped already, look for 941 * contiguous entries in the mapping table that are not reserved. If 942 * enough entries are found, return the starting index for that space. 943 */ 944 num_found = 0; 945 for (map_idx = (max_num_phy_ids + skip_count); 946 map_idx < end_of_table; map_idx++) { 947 mt_entry = &sc->mapping_table[map_idx]; 948 if (!(mt_entry->device_info & MPS_DEV_RESERVED)) { 949 num_found += 1; 950 if (num_found == et_entry->num_slots) { 951 start_idx = (map_idx - num_found) + 1; 952 mps_dprint(sc, MPS_MAPPING, "%s: Found space " 953 "in the mapping for enclosure at map index " 954 "%d.\n", __func__, start_idx); 955 return start_idx; 956 } 957 } else 958 num_found = 0; 959 } 960 961 /* 962 * If here, it means that not enough space in the mapping table was 963 * found to support this enclosure, so go through the enclosure table to 964 * see if any enclosure entries have a missing count. If so, get the 965 * enclosure with the highest missing count and check it to see if there 966 * is enough space for the new enclosure. 967 */ 968 while (!done_flag) { 969 enc_idx = _mapping_get_high_missing_et_idx(sc); 970 if (enc_idx == MPS_ENCTABLE_BAD_IDX) { 971 mps_dprint(sc, MPS_MAPPING, "%s: Not enough space was " 972 "found in the mapping for the added enclosure.\n", 973 __func__); 974 return MPS_MAPTABLE_BAD_IDX; 975 } 976 977 /* 978 * Found a missing enclosure. Set the skip_search flag so this 979 * enclosure is not checked again for a high missing count if 980 * the loop continues. This way, all missing enclosures can 981 * have their space added together to find enough space in the 982 * mapping table for the added enclosure. The space must be 983 * contiguous. 984 */ 985 mps_dprint(sc, MPS_MAPPING, "%s: Space from a missing " 986 "enclosure was found.\n", __func__); 987 enc_entry = &sc->enclosure_table[enc_idx]; 988 enc_entry->skip_search = 1; 989 990 /* 991 * Unmark all of the missing enclosure's device's reserved 992 * space. These will be remarked as reserved if this missing 993 * enclosure's space is not used. 994 */ 995 mps_dprint(sc, MPS_MAPPING, "%s: Clear the reserved flag for " 996 "all of the map entries for the enclosure.\n", __func__); 997 mt_entry = &sc->mapping_table[enc_entry->start_index]; 998 for (map_idx = enc_entry->start_index; map_idx < 999 (enc_entry->start_index + enc_entry->num_slots); map_idx++, 1000 mt_entry++) 1001 mt_entry->device_info &= ~MPS_DEV_RESERVED; 1002 1003 /* 1004 * Now that space has been unreserved, check again to see if 1005 * enough space is available for the new enclosure. 1006 */ 1007 mps_dprint(sc, MPS_MAPPING, "%s: Check if new mapping space is " 1008 "enough for the new enclosure.\n", __func__); 1009 found_space = 0; 1010 num_found = 0; 1011 for (map_idx = (max_num_phy_ids + skip_count); 1012 map_idx < end_of_table; map_idx++) { 1013 mt_entry = &sc->mapping_table[map_idx]; 1014 if (!(mt_entry->device_info & MPS_DEV_RESERVED)) { 1015 num_found += 1; 1016 if (num_found == et_entry->num_slots) { 1017 start_idx = (map_idx - num_found) + 1; 1018 found_space = 1; 1019 break; 1020 } 1021 } else 1022 num_found = 0; 1023 } 1024 if (!found_space) 1025 continue; 1026 1027 /* 1028 * If enough space was found, all of the missing enclosures that 1029 * will be used for the new enclosure must be added to the 1030 * removal table. Then all mappings for the enclosure's devices 1031 * and for the enclosure itself need to be cleared. There may be 1032 * more than one enclosure to add to the removal table and 1033 * clear. 1034 */ 1035 mps_dprint(sc, MPS_MAPPING, "%s: Found space in the mapping " 1036 "for enclosure at map index %d.\n", __func__, start_idx); 1037 for (map_idx = start_idx; map_idx < (start_idx + num_found); 1038 map_idx++) { 1039 enc_entry = sc->enclosure_table; 1040 for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; 1041 enc_idx++, enc_entry++) { 1042 if (map_idx < enc_entry->start_index || 1043 map_idx > (enc_entry->start_index + 1044 enc_entry->num_slots)) 1045 continue; 1046 if (!enc_entry->removal_flag) { 1047 mps_dprint(sc, MPS_MAPPING, "%s: " 1048 "Enclosure %d will be removed from " 1049 "the mapping table.\n", __func__, 1050 enc_idx); 1051 enc_entry->removal_flag = 1; 1052 _mapping_add_to_removal_table(sc, 1053 enc_entry->dpm_entry_num); 1054 } 1055 mt_entry = &sc->mapping_table[map_idx]; 1056 _mapping_clear_map_entry(mt_entry); 1057 if (map_idx == (enc_entry->start_index + 1058 enc_entry->num_slots - 1)) 1059 _mapping_clear_enc_entry(et_entry); 1060 } 1061 } 1062 1063 /* 1064 * During the search for space for this enclosure, some entries 1065 * in the mapping table may have been unreserved. Go back and 1066 * change all of these to reserved again. Only the enclosures 1067 * with the removal_flag set should be left as unreserved. The 1068 * skip_search flag needs to be cleared as well so that the 1069 * enclosure's space will be looked at the next time space is 1070 * needed. 1071 */ 1072 enc_entry = sc->enclosure_table; 1073 for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; 1074 enc_idx++, enc_entry++) { 1075 if (!enc_entry->removal_flag) { 1076 mps_dprint(sc, MPS_MAPPING, "%s: Reset the " 1077 "reserved flag for all of the map entries " 1078 "for enclosure %d.\n", __func__, enc_idx); 1079 mt_entry = &sc->mapping_table[enc_entry-> 1080 start_index]; 1081 for (map_idx = enc_entry->start_index; map_idx < 1082 (enc_entry->start_index + 1083 enc_entry->num_slots); map_idx++, 1084 mt_entry++) 1085 mt_entry->device_info |= 1086 MPS_DEV_RESERVED; 1087 et_entry->skip_search = 0; 1088 } 1089 } 1090 done_flag = 1; 1091 } 1092 return start_idx; 1093 } 1094 1095 /** 1096 * _mapping_get_dev_info -get information about newly added devices 1097 * @sc: per adapter object 1098 * @topo_change: Topology change event entry 1099 * 1100 * Search through the topology change event list and issues sas device pg0 1101 * requests for the newly added device and reserved entries in tables 1102 * 1103 * Returns nothing 1104 */ 1105 static void 1106 _mapping_get_dev_info(struct mps_softc *sc, 1107 struct _map_topology_change *topo_change) 1108 { 1109 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 1110 Mpi2ConfigReply_t mpi_reply; 1111 Mpi2SasDevicePage0_t sas_device_pg0; 1112 u8 entry, enc_idx, phy_idx; 1113 u32 map_idx, index, device_info; 1114 struct _map_phy_change *phy_change, *tmp_phy_change; 1115 uint64_t sas_address; 1116 struct enc_mapping_table *et_entry; 1117 struct dev_mapping_table *mt_entry; 1118 u8 add_code = MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED; 1119 int rc = 1; 1120 1121 for (entry = 0; entry < topo_change->num_entries; entry++) { 1122 phy_change = &topo_change->phy_details[entry]; 1123 if (phy_change->is_processed || !phy_change->dev_handle || 1124 phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) 1125 continue; 1126 1127 if (mps_config_get_sas_device_pg0(sc, &mpi_reply, 1128 &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, 1129 phy_change->dev_handle)) { 1130 phy_change->is_processed = 1; 1131 continue; 1132 } 1133 1134 /* 1135 * Always get SATA Identify information because this is used 1136 * to determine if Start/Stop Unit should be sent to the drive 1137 * when the system is shutdown. 1138 */ 1139 device_info = le32toh(sas_device_pg0.DeviceInfo); 1140 sas_address = le32toh(sas_device_pg0.SASAddress.High); 1141 sas_address = (sas_address << 32) | 1142 le32toh(sas_device_pg0.SASAddress.Low); 1143 if ((device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE) && 1144 (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)) { 1145 rc = mpssas_get_sas_address_for_sata_disk(sc, 1146 &sas_address, phy_change->dev_handle, device_info, 1147 &phy_change->is_SATA_SSD); 1148 if (rc) { 1149 mps_dprint(sc, MPS_ERROR, "%s: failed to get " 1150 "disk type (SSD or HDD) and SAS Address " 1151 "for SATA device with handle 0x%04x\n", 1152 __func__, phy_change->dev_handle); 1153 } 1154 } 1155 1156 phy_change->physical_id = sas_address; 1157 phy_change->slot = le16toh(sas_device_pg0.Slot); 1158 phy_change->device_info = device_info; 1159 1160 /* 1161 * When using Enc/Slot mapping, if this device is an enclosure 1162 * make sure that all of its slots can fit into the mapping 1163 * table. 1164 */ 1165 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1166 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 1167 /* 1168 * The enclosure should already be in the enclosure 1169 * table due to the Enclosure Add event. If not, just 1170 * continue, nothing can be done. 1171 */ 1172 enc_idx = _mapping_get_enc_idx_from_handle(sc, 1173 topo_change->enc_handle); 1174 if (enc_idx == MPS_ENCTABLE_BAD_IDX) { 1175 phy_change->is_processed = 1; 1176 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 1177 "failed to add the device with handle " 1178 "0x%04x because enclosure handle 0x%04x " 1179 "is not in the mapping table\n", __func__, 1180 phy_change->dev_handle, 1181 topo_change->enc_handle); 1182 continue; 1183 } 1184 if (!((phy_change->device_info & 1185 MPI2_SAS_DEVICE_INFO_END_DEVICE) && 1186 (phy_change->device_info & 1187 (MPI2_SAS_DEVICE_INFO_SSP_TARGET | 1188 MPI2_SAS_DEVICE_INFO_STP_TARGET | 1189 MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))) { 1190 phy_change->is_processed = 1; 1191 continue; 1192 } 1193 et_entry = &sc->enclosure_table[enc_idx]; 1194 1195 /* 1196 * If the enclosure already has a start_index, it's been 1197 * mapped, so go to the next Topo change. 1198 */ 1199 if (et_entry->start_index != MPS_MAPTABLE_BAD_IDX) 1200 continue; 1201 1202 /* 1203 * If the Expander Handle is 0, the devices are direct 1204 * attached. In that case, the start_index must be just 1205 * after the reserved entries. Otherwise, find space in 1206 * the mapping table for the enclosure's devices. 1207 */ 1208 if (!topo_change->exp_handle) { 1209 map_idx = sc->num_rsvd_entries; 1210 et_entry->start_index = map_idx; 1211 } else { 1212 map_idx = _mapping_find_enc_map_space(sc, 1213 et_entry); 1214 et_entry->start_index = map_idx; 1215 1216 /* 1217 * If space cannot be found to hold all of the 1218 * enclosure's devices in the mapping table, 1219 * there's no need to continue checking the 1220 * other devices in this event. Set all of the 1221 * phy_details for this event (if the change is 1222 * for an add) as already processed because none 1223 * of these devices can be added to the mapping 1224 * table. 1225 */ 1226 if (et_entry->start_index == 1227 MPS_MAPTABLE_BAD_IDX) { 1228 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, 1229 "%s: failed to add the enclosure " 1230 "with ID 0x%016jx because there is " 1231 "no free space available in the " 1232 "mapping table for all of the " 1233 "enclosure's devices.\n", __func__, 1234 (uintmax_t)et_entry->enclosure_id); 1235 phy_change->is_processed = 1; 1236 for (phy_idx = 0; phy_idx < 1237 topo_change->num_entries; 1238 phy_idx++) { 1239 tmp_phy_change = 1240 &topo_change->phy_details 1241 [phy_idx]; 1242 if (tmp_phy_change->reason == 1243 add_code) 1244 tmp_phy_change-> 1245 is_processed = 1; 1246 } 1247 break; 1248 } 1249 } 1250 1251 /* 1252 * Found space in the mapping table for this enclosure. 1253 * Initialize each mapping table entry for the 1254 * enclosure. 1255 */ 1256 mps_dprint(sc, MPS_MAPPING, "%s: Initialize %d map " 1257 "entries for the enclosure, starting at map index " 1258 " %d.\n", __func__, et_entry->num_slots, map_idx); 1259 mt_entry = &sc->mapping_table[map_idx]; 1260 for (index = map_idx; index < (et_entry->num_slots 1261 + map_idx); index++, mt_entry++) { 1262 mt_entry->device_info = MPS_DEV_RESERVED; 1263 mt_entry->physical_id = et_entry->enclosure_id; 1264 mt_entry->phy_bits = et_entry->phy_bits; 1265 mt_entry->missing_count = 0; 1266 } 1267 } 1268 } 1269 } 1270 1271 /** 1272 * _mapping_set_mid_to_eid -set map table data from enclosure table 1273 * @sc: per adapter object 1274 * @et_entry: enclosure entry 1275 * 1276 * Returns nothing 1277 */ 1278 static inline void 1279 _mapping_set_mid_to_eid(struct mps_softc *sc, 1280 struct enc_mapping_table *et_entry) 1281 { 1282 struct dev_mapping_table *mt_entry; 1283 u16 slots = et_entry->num_slots, map_idx; 1284 u32 start_idx = et_entry->start_index; 1285 1286 if (start_idx != MPS_MAPTABLE_BAD_IDX) { 1287 mt_entry = &sc->mapping_table[start_idx]; 1288 for (map_idx = 0; map_idx < slots; map_idx++, mt_entry++) 1289 mt_entry->physical_id = et_entry->enclosure_id; 1290 } 1291 } 1292 1293 /** 1294 * _mapping_clear_removed_entries - mark the entries to be cleared 1295 * @sc: per adapter object 1296 * 1297 * Search through the removal table and mark the entries which needs to be 1298 * flushed to DPM and also updates the map table and enclosure table by 1299 * clearing the corresponding entries. 1300 * 1301 * Returns nothing 1302 */ 1303 static void 1304 _mapping_clear_removed_entries(struct mps_softc *sc) 1305 { 1306 u32 remove_idx; 1307 struct map_removal_table *remove_entry; 1308 Mpi2DriverMap0Entry_t *dpm_entry; 1309 u8 done_flag = 0, num_entries, m, i; 1310 struct enc_mapping_table *et_entry, *from, *to; 1311 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 1312 1313 if (sc->is_dpm_enable) { 1314 remove_entry = sc->removal_table; 1315 for (remove_idx = 0; remove_idx < sc->max_devices; 1316 remove_idx++, remove_entry++) { 1317 if (remove_entry->dpm_entry_num != MPS_DPM_BAD_IDX) { 1318 dpm_entry = (Mpi2DriverMap0Entry_t *) 1319 ((u8 *) sc->dpm_pg0 + 1320 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 1321 dpm_entry += remove_entry->dpm_entry_num; 1322 dpm_entry->PhysicalIdentifier.Low = 0; 1323 dpm_entry->PhysicalIdentifier.High = 0; 1324 dpm_entry->DeviceIndex = 0; 1325 dpm_entry->MappingInformation = 0; 1326 dpm_entry->PhysicalBitsMapping = 0; 1327 sc->dpm_flush_entry[remove_entry-> 1328 dpm_entry_num] = 1; 1329 sc->dpm_entry_used[remove_entry->dpm_entry_num] 1330 = 0; 1331 remove_entry->dpm_entry_num = MPS_DPM_BAD_IDX; 1332 } 1333 } 1334 } 1335 1336 /* 1337 * When using Enc/Slot mapping, if a new enclosure was added and old 1338 * enclosure space was needed, the enclosure table may now have gaps 1339 * that need to be closed. All enclosure mappings need to be contiguous 1340 * so that space can be reused correctly if available. 1341 */ 1342 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1343 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 1344 num_entries = sc->num_enc_table_entries; 1345 while (!done_flag) { 1346 done_flag = 1; 1347 et_entry = sc->enclosure_table; 1348 for (i = 0; i < num_entries; i++, et_entry++) { 1349 if (!et_entry->enc_handle && et_entry-> 1350 init_complete) { 1351 done_flag = 0; 1352 if (i != (num_entries - 1)) { 1353 from = &sc->enclosure_table 1354 [i+1]; 1355 to = &sc->enclosure_table[i]; 1356 for (m = i; m < (num_entries - 1357 1); m++, from++, to++) { 1358 _mapping_set_mid_to_eid 1359 (sc, to); 1360 *to = *from; 1361 } 1362 _mapping_clear_enc_entry(to); 1363 sc->num_enc_table_entries--; 1364 num_entries = 1365 sc->num_enc_table_entries; 1366 } else { 1367 _mapping_clear_enc_entry 1368 (et_entry); 1369 sc->num_enc_table_entries--; 1370 num_entries = 1371 sc->num_enc_table_entries; 1372 } 1373 } 1374 } 1375 } 1376 } 1377 } 1378 1379 /** 1380 * _mapping_add_new_device -Add the new device into mapping table 1381 * @sc: per adapter object 1382 * @topo_change: Topology change event entry 1383 * 1384 * Search through the topology change event list and update map table, 1385 * enclosure table and DPM pages for the newly added devices. 1386 * 1387 * Returns nothing 1388 */ 1389 static void 1390 _mapping_add_new_device(struct mps_softc *sc, 1391 struct _map_topology_change *topo_change) 1392 { 1393 u8 enc_idx, missing_cnt, is_removed = 0; 1394 u16 dpm_idx; 1395 u32 search_idx, map_idx; 1396 u32 entry; 1397 struct dev_mapping_table *mt_entry; 1398 struct enc_mapping_table *et_entry; 1399 struct _map_phy_change *phy_change; 1400 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 1401 Mpi2DriverMap0Entry_t *dpm_entry; 1402 uint64_t temp64_var; 1403 u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT; 1404 u8 hdr_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER); 1405 u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs); 1406 1407 for (entry = 0; entry < topo_change->num_entries; entry++) { 1408 phy_change = &topo_change->phy_details[entry]; 1409 if (phy_change->is_processed) 1410 continue; 1411 if (phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED || 1412 !phy_change->dev_handle) { 1413 phy_change->is_processed = 1; 1414 continue; 1415 } 1416 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1417 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 1418 enc_idx = _mapping_get_enc_idx_from_handle 1419 (sc, topo_change->enc_handle); 1420 if (enc_idx == MPS_ENCTABLE_BAD_IDX) { 1421 phy_change->is_processed = 1; 1422 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 1423 "failed to add the device with handle " 1424 "0x%04x because enclosure handle 0x%04x " 1425 "is not in the mapping table\n", __func__, 1426 phy_change->dev_handle, 1427 topo_change->enc_handle); 1428 continue; 1429 } 1430 1431 /* 1432 * If the enclosure's start_index is BAD here, it means 1433 * that there is no room in the mapping table to cover 1434 * all of the devices that could be in the enclosure. 1435 * There's no reason to process any of the devices for 1436 * this enclosure since they can't be mapped. 1437 */ 1438 et_entry = &sc->enclosure_table[enc_idx]; 1439 if (et_entry->start_index == MPS_MAPTABLE_BAD_IDX) { 1440 phy_change->is_processed = 1; 1441 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 1442 "failed to add the device with handle " 1443 "0x%04x because there is no free space " 1444 "available in the mapping table\n", 1445 __func__, phy_change->dev_handle); 1446 continue; 1447 } 1448 1449 /* 1450 * Add this device to the mapping table at the correct 1451 * offset where space was found to map the enclosure. 1452 * Then setup the DPM entry information if being used. 1453 */ 1454 map_idx = et_entry->start_index + phy_change->slot - 1455 et_entry->start_slot; 1456 mt_entry = &sc->mapping_table[map_idx]; 1457 mt_entry->physical_id = phy_change->physical_id; 1458 mt_entry->id = map_idx; 1459 mt_entry->dev_handle = phy_change->dev_handle; 1460 mt_entry->missing_count = 0; 1461 mt_entry->dpm_entry_num = et_entry->dpm_entry_num; 1462 mt_entry->device_info = phy_change->device_info | 1463 (MPS_DEV_RESERVED | MPS_MAP_IN_USE); 1464 if (sc->is_dpm_enable) { 1465 dpm_idx = et_entry->dpm_entry_num; 1466 if (dpm_idx == MPS_DPM_BAD_IDX) 1467 dpm_idx = _mapping_get_dpm_idx_from_id 1468 (sc, et_entry->enclosure_id, 1469 et_entry->phy_bits); 1470 if (dpm_idx == MPS_DPM_BAD_IDX) { 1471 dpm_idx = _mapping_get_free_dpm_idx(sc); 1472 if (dpm_idx != MPS_DPM_BAD_IDX) { 1473 dpm_entry = 1474 (Mpi2DriverMap0Entry_t *) 1475 ((u8 *) sc->dpm_pg0 + 1476 hdr_sz); 1477 dpm_entry += dpm_idx; 1478 dpm_entry-> 1479 PhysicalIdentifier.Low = 1480 (0xFFFFFFFF & 1481 et_entry->enclosure_id); 1482 dpm_entry-> 1483 PhysicalIdentifier.High = 1484 (et_entry->enclosure_id 1485 >> 32); 1486 dpm_entry->DeviceIndex = 1487 (U16)et_entry->start_index; 1488 dpm_entry->MappingInformation = 1489 et_entry->num_slots; 1490 dpm_entry->MappingInformation 1491 <<= map_shift; 1492 dpm_entry->PhysicalBitsMapping 1493 = et_entry->phy_bits; 1494 et_entry->dpm_entry_num = 1495 dpm_idx; 1496 sc->dpm_entry_used[dpm_idx] = 1; 1497 sc->dpm_flush_entry[dpm_idx] = 1498 1; 1499 phy_change->is_processed = 1; 1500 } else { 1501 phy_change->is_processed = 1; 1502 mps_dprint(sc, MPS_ERROR | 1503 MPS_MAPPING, "%s: failed " 1504 "to add the device with " 1505 "handle 0x%04x to " 1506 "persistent table because " 1507 "there is no free space " 1508 "available\n", __func__, 1509 phy_change->dev_handle); 1510 } 1511 } else { 1512 et_entry->dpm_entry_num = dpm_idx; 1513 mt_entry->dpm_entry_num = dpm_idx; 1514 } 1515 } 1516 et_entry->init_complete = 1; 1517 } else if ((ioc_pg8_flags & 1518 MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1519 MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) { 1520 /* 1521 * Get the mapping table index for this device. If it's 1522 * not in the mapping table yet, find a free entry if 1523 * one is available. If there are no free entries, look 1524 * for the entry that has the highest missing count. If 1525 * none of that works to find an entry in the mapping 1526 * table, there is a problem. Log a message and just 1527 * continue on. 1528 */ 1529 map_idx = _mapping_get_mt_idx_from_id 1530 (sc, phy_change->physical_id); 1531 if (map_idx == MPS_MAPTABLE_BAD_IDX) { 1532 search_idx = sc->num_rsvd_entries; 1533 if (topo_change->exp_handle) 1534 search_idx += max_num_phy_ids; 1535 map_idx = _mapping_get_free_mt_idx(sc, 1536 search_idx); 1537 } 1538 1539 /* 1540 * If an entry will be used that has a missing device, 1541 * clear its entry from the DPM in the controller. 1542 */ 1543 if (map_idx == MPS_MAPTABLE_BAD_IDX) { 1544 map_idx = _mapping_get_high_missing_mt_idx(sc); 1545 if (map_idx != MPS_MAPTABLE_BAD_IDX) { 1546 mt_entry = &sc->mapping_table[map_idx]; 1547 _mapping_add_to_removal_table(sc, 1548 mt_entry->dpm_entry_num); 1549 is_removed = 1; 1550 mt_entry->init_complete = 0; 1551 } 1552 } 1553 if (map_idx != MPS_MAPTABLE_BAD_IDX) { 1554 mt_entry = &sc->mapping_table[map_idx]; 1555 mt_entry->physical_id = phy_change->physical_id; 1556 mt_entry->id = map_idx; 1557 mt_entry->dev_handle = phy_change->dev_handle; 1558 mt_entry->missing_count = 0; 1559 mt_entry->device_info = phy_change->device_info 1560 | (MPS_DEV_RESERVED | MPS_MAP_IN_USE); 1561 } else { 1562 phy_change->is_processed = 1; 1563 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 1564 "failed to add the device with handle " 1565 "0x%04x because there is no free space " 1566 "available in the mapping table\n", 1567 __func__, phy_change->dev_handle); 1568 continue; 1569 } 1570 if (sc->is_dpm_enable) { 1571 if (mt_entry->dpm_entry_num != 1572 MPS_DPM_BAD_IDX) { 1573 dpm_idx = mt_entry->dpm_entry_num; 1574 dpm_entry = (Mpi2DriverMap0Entry_t *) 1575 ((u8 *)sc->dpm_pg0 + hdr_sz); 1576 dpm_entry += dpm_idx; 1577 missing_cnt = dpm_entry-> 1578 MappingInformation & 1579 MPI2_DRVMAP0_MAPINFO_MISSING_MASK; 1580 temp64_var = dpm_entry-> 1581 PhysicalIdentifier.High; 1582 temp64_var = (temp64_var << 32) | 1583 dpm_entry->PhysicalIdentifier.Low; 1584 1585 /* 1586 * If the Mapping Table's info is not 1587 * the same as the DPM entry, clear the 1588 * init_complete flag so that it's 1589 * updated. 1590 */ 1591 if ((mt_entry->physical_id == 1592 temp64_var) && !missing_cnt) 1593 mt_entry->init_complete = 1; 1594 else 1595 mt_entry->init_complete = 0; 1596 } else { 1597 dpm_idx = _mapping_get_free_dpm_idx(sc); 1598 mt_entry->init_complete = 0; 1599 } 1600 if (dpm_idx != MPS_DPM_BAD_IDX && 1601 !mt_entry->init_complete) { 1602 mt_entry->dpm_entry_num = dpm_idx; 1603 dpm_entry = (Mpi2DriverMap0Entry_t *) 1604 ((u8 *)sc->dpm_pg0 + hdr_sz); 1605 dpm_entry += dpm_idx; 1606 dpm_entry->PhysicalIdentifier.Low = 1607 (0xFFFFFFFF & 1608 mt_entry->physical_id); 1609 dpm_entry->PhysicalIdentifier.High = 1610 (mt_entry->physical_id >> 32); 1611 dpm_entry->DeviceIndex = (U16) map_idx; 1612 dpm_entry->MappingInformation = 0; 1613 dpm_entry->PhysicalBitsMapping = 0; 1614 sc->dpm_entry_used[dpm_idx] = 1; 1615 sc->dpm_flush_entry[dpm_idx] = 1; 1616 phy_change->is_processed = 1; 1617 } else if (dpm_idx == MPS_DPM_BAD_IDX) { 1618 phy_change->is_processed = 1; 1619 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, 1620 "%s: failed to add the device with " 1621 "handle 0x%04x to persistent table " 1622 "because there is no free space " 1623 "available\n", __func__, 1624 phy_change->dev_handle); 1625 } 1626 } 1627 mt_entry->init_complete = 1; 1628 } 1629 1630 phy_change->is_processed = 1; 1631 } 1632 if (is_removed) 1633 _mapping_clear_removed_entries(sc); 1634 } 1635 1636 /** 1637 * _mapping_flush_dpm_pages -Flush the DPM pages to NVRAM 1638 * @sc: per adapter object 1639 * 1640 * Returns nothing 1641 */ 1642 static void 1643 _mapping_flush_dpm_pages(struct mps_softc *sc) 1644 { 1645 Mpi2DriverMap0Entry_t *dpm_entry; 1646 Mpi2ConfigReply_t mpi_reply; 1647 Mpi2DriverMappingPage0_t config_page; 1648 u16 entry_num; 1649 1650 for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) { 1651 if (!sc->dpm_flush_entry[entry_num]) 1652 continue; 1653 memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t)); 1654 memcpy(&config_page.Header, (u8 *)sc->dpm_pg0, 1655 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 1656 dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 + 1657 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 1658 dpm_entry += entry_num; 1659 dpm_entry->MappingInformation = htole16(dpm_entry-> 1660 MappingInformation); 1661 dpm_entry->DeviceIndex = htole16(dpm_entry->DeviceIndex); 1662 dpm_entry->PhysicalBitsMapping = htole32(dpm_entry-> 1663 PhysicalBitsMapping); 1664 memcpy(&config_page.Entry, (u8 *)dpm_entry, 1665 sizeof(Mpi2DriverMap0Entry_t)); 1666 /* TODO-How to handle failed writes? */ 1667 mps_dprint(sc, MPS_MAPPING, "%s: Flushing DPM entry %d.\n", 1668 __func__, entry_num); 1669 if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page, 1670 entry_num)) { 1671 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Flush of " 1672 "DPM entry %d for device failed\n", __func__, 1673 entry_num); 1674 } else 1675 sc->dpm_flush_entry[entry_num] = 0; 1676 dpm_entry->MappingInformation = le16toh(dpm_entry-> 1677 MappingInformation); 1678 dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex); 1679 dpm_entry->PhysicalBitsMapping = le32toh(dpm_entry-> 1680 PhysicalBitsMapping); 1681 } 1682 } 1683 1684 /** 1685 * _mapping_allocate_memory- allocates the memory required for mapping tables 1686 * @sc: per adapter object 1687 * 1688 * Allocates the memory for all the tables required for host mapping 1689 * 1690 * Return 0 on success or non-zero on failure. 1691 */ 1692 int 1693 mps_mapping_allocate_memory(struct mps_softc *sc) 1694 { 1695 uint32_t dpm_pg0_sz; 1696 1697 sc->mapping_table = malloc((sizeof(struct dev_mapping_table) * 1698 sc->max_devices), M_MPT2, M_ZERO|M_NOWAIT); 1699 if (!sc->mapping_table) 1700 goto free_resources; 1701 1702 sc->removal_table = malloc((sizeof(struct map_removal_table) * 1703 sc->max_devices), M_MPT2, M_ZERO|M_NOWAIT); 1704 if (!sc->removal_table) 1705 goto free_resources; 1706 1707 sc->enclosure_table = malloc((sizeof(struct enc_mapping_table) * 1708 sc->max_enclosures), M_MPT2, M_ZERO|M_NOWAIT); 1709 if (!sc->enclosure_table) 1710 goto free_resources; 1711 1712 sc->dpm_entry_used = malloc((sizeof(u8) * sc->max_dpm_entries), 1713 M_MPT2, M_ZERO|M_NOWAIT); 1714 if (!sc->dpm_entry_used) 1715 goto free_resources; 1716 1717 sc->dpm_flush_entry = malloc((sizeof(u8) * sc->max_dpm_entries), 1718 M_MPT2, M_ZERO|M_NOWAIT); 1719 if (!sc->dpm_flush_entry) 1720 goto free_resources; 1721 1722 dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) + 1723 (sc->max_dpm_entries * sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY)); 1724 1725 sc->dpm_pg0 = malloc(dpm_pg0_sz, M_MPT2, M_ZERO|M_NOWAIT); 1726 if (!sc->dpm_pg0) { 1727 printf("%s: memory alloc failed for dpm page; disabling dpm\n", 1728 __func__); 1729 sc->is_dpm_enable = 0; 1730 } 1731 1732 return 0; 1733 1734 free_resources: 1735 free(sc->mapping_table, M_MPT2); 1736 free(sc->removal_table, M_MPT2); 1737 free(sc->enclosure_table, M_MPT2); 1738 free(sc->dpm_entry_used, M_MPT2); 1739 free(sc->dpm_flush_entry, M_MPT2); 1740 free(sc->dpm_pg0, M_MPT2); 1741 printf("%s: device initialization failed due to failure in mapping " 1742 "table memory allocation\n", __func__); 1743 return -1; 1744 } 1745 1746 /** 1747 * mps_mapping_free_memory- frees the memory allocated for mapping tables 1748 * @sc: per adapter object 1749 * 1750 * Returns nothing. 1751 */ 1752 void 1753 mps_mapping_free_memory(struct mps_softc *sc) 1754 { 1755 free(sc->mapping_table, M_MPT2); 1756 free(sc->removal_table, M_MPT2); 1757 free(sc->enclosure_table, M_MPT2); 1758 free(sc->dpm_entry_used, M_MPT2); 1759 free(sc->dpm_flush_entry, M_MPT2); 1760 free(sc->dpm_pg0, M_MPT2); 1761 } 1762 1763 static void 1764 _mapping_process_dpm_pg0(struct mps_softc *sc) 1765 { 1766 u8 missing_cnt, enc_idx; 1767 u16 slot_id, entry_num, num_slots; 1768 u32 map_idx, dev_idx, start_idx, end_idx; 1769 struct dev_mapping_table *mt_entry; 1770 Mpi2DriverMap0Entry_t *dpm_entry; 1771 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 1772 u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs); 1773 struct enc_mapping_table *et_entry; 1774 u64 physical_id; 1775 u32 phy_bits = 0; 1776 1777 /* 1778 * start_idx and end_idx are only used for IR. 1779 */ 1780 if (sc->ir_firmware) 1781 _mapping_get_ir_maprange(sc, &start_idx, &end_idx); 1782 1783 /* 1784 * Look through all of the DPM entries that were read from the 1785 * controller and copy them over to the driver's internal table if they 1786 * have a non-zero ID. At this point, any ID with a value of 0 would be 1787 * invalid, so don't copy it. 1788 */ 1789 mps_dprint(sc, MPS_MAPPING, "%s: Start copy of %d DPM entries into the " 1790 "mapping table.\n", __func__, sc->max_dpm_entries); 1791 dpm_entry = (Mpi2DriverMap0Entry_t *) ((uint8_t *) sc->dpm_pg0 + 1792 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 1793 for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++, 1794 dpm_entry++) { 1795 physical_id = dpm_entry->PhysicalIdentifier.High; 1796 physical_id = (physical_id << 32) | 1797 dpm_entry->PhysicalIdentifier.Low; 1798 if (!physical_id) { 1799 sc->dpm_entry_used[entry_num] = 0; 1800 continue; 1801 } 1802 sc->dpm_entry_used[entry_num] = 1; 1803 dpm_entry->MappingInformation = le16toh(dpm_entry-> 1804 MappingInformation); 1805 missing_cnt = dpm_entry->MappingInformation & 1806 MPI2_DRVMAP0_MAPINFO_MISSING_MASK; 1807 dev_idx = le16toh(dpm_entry->DeviceIndex); 1808 phy_bits = le32toh(dpm_entry->PhysicalBitsMapping); 1809 1810 /* 1811 * Volumes are at special locations in the mapping table so 1812 * account for that. Volume mapping table entries do not depend 1813 * on the type of mapping, so continue the loop after adding 1814 * volumes to the mapping table. 1815 */ 1816 if (sc->ir_firmware && (dev_idx >= start_idx) && 1817 (dev_idx <= end_idx)) { 1818 mt_entry = &sc->mapping_table[dev_idx]; 1819 mt_entry->physical_id = 1820 dpm_entry->PhysicalIdentifier.High; 1821 mt_entry->physical_id = (mt_entry->physical_id << 32) | 1822 dpm_entry->PhysicalIdentifier.Low; 1823 mt_entry->id = dev_idx; 1824 mt_entry->missing_count = missing_cnt; 1825 mt_entry->dpm_entry_num = entry_num; 1826 mt_entry->device_info = MPS_DEV_RESERVED; 1827 continue; 1828 } 1829 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1830 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 1831 /* 1832 * The dev_idx for an enclosure is the start index. If 1833 * the start index is within the controller's default 1834 * enclosure area, set the number of slots for this 1835 * enclosure to the max allowed. Otherwise, it should be 1836 * a normal enclosure and the number of slots is in the 1837 * DPM entry's Mapping Information. 1838 */ 1839 if (dev_idx < (sc->num_rsvd_entries + 1840 max_num_phy_ids)) { 1841 slot_id = 0; 1842 if (ioc_pg8_flags & 1843 MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1) 1844 slot_id = 1; 1845 num_slots = max_num_phy_ids; 1846 } else { 1847 slot_id = 0; 1848 num_slots = dpm_entry->MappingInformation & 1849 MPI2_DRVMAP0_MAPINFO_SLOT_MASK; 1850 num_slots >>= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT; 1851 } 1852 enc_idx = sc->num_enc_table_entries; 1853 if (enc_idx >= sc->max_enclosures) { 1854 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 1855 "Number of enclosure entries in DPM exceed " 1856 "the max allowed of %d.\n", __func__, 1857 sc->max_enclosures); 1858 break; 1859 } 1860 sc->num_enc_table_entries++; 1861 et_entry = &sc->enclosure_table[enc_idx]; 1862 physical_id = dpm_entry->PhysicalIdentifier.High; 1863 et_entry->enclosure_id = (physical_id << 32) | 1864 dpm_entry->PhysicalIdentifier.Low; 1865 et_entry->start_index = dev_idx; 1866 et_entry->dpm_entry_num = entry_num; 1867 et_entry->num_slots = num_slots; 1868 et_entry->start_slot = slot_id; 1869 et_entry->missing_count = missing_cnt; 1870 et_entry->phy_bits = phy_bits; 1871 1872 /* 1873 * Initialize all entries for this enclosure in the 1874 * mapping table and mark them as reserved. The actual 1875 * devices have not been processed yet but when they are 1876 * they will use these entries. If an entry is found 1877 * that already has a valid DPM index, the mapping table 1878 * is corrupt. This can happen if the mapping type is 1879 * changed without clearing all of the DPM entries in 1880 * the controller. 1881 */ 1882 mt_entry = &sc->mapping_table[dev_idx]; 1883 for (map_idx = dev_idx; map_idx < (dev_idx + num_slots); 1884 map_idx++, mt_entry++) { 1885 if (mt_entry->dpm_entry_num != 1886 MPS_DPM_BAD_IDX) { 1887 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, 1888 "%s: Conflict in mapping table for " 1889 "enclosure %d device %d\n", 1890 __func__, enc_idx, map_idx); 1891 break; 1892 } 1893 physical_id = 1894 dpm_entry->PhysicalIdentifier.High; 1895 mt_entry->physical_id = (physical_id << 32) | 1896 dpm_entry->PhysicalIdentifier.Low; 1897 mt_entry->phy_bits = phy_bits; 1898 mt_entry->id = dev_idx; 1899 mt_entry->dpm_entry_num = entry_num; 1900 mt_entry->missing_count = missing_cnt; 1901 mt_entry->device_info = MPS_DEV_RESERVED; 1902 } 1903 } else if ((ioc_pg8_flags & 1904 MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1905 MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) { 1906 /* 1907 * Device mapping, so simply copy the DPM entries to the 1908 * mapping table, but check for a corrupt mapping table 1909 * (as described above in Enc/Slot mapping). 1910 */ 1911 map_idx = dev_idx; 1912 mt_entry = &sc->mapping_table[map_idx]; 1913 if (mt_entry->dpm_entry_num != MPS_DPM_BAD_IDX) { 1914 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 1915 "Conflict in mapping table for device %d\n", 1916 __func__, map_idx); 1917 break; 1918 } 1919 physical_id = dpm_entry->PhysicalIdentifier.High; 1920 mt_entry->physical_id = (physical_id << 32) | 1921 dpm_entry->PhysicalIdentifier.Low; 1922 mt_entry->phy_bits = phy_bits; 1923 mt_entry->id = dev_idx; 1924 mt_entry->missing_count = missing_cnt; 1925 mt_entry->dpm_entry_num = entry_num; 1926 mt_entry->device_info = MPS_DEV_RESERVED; 1927 } 1928 } /*close the loop for DPM table */ 1929 } 1930 1931 /* 1932 * mps_mapping_check_devices - start of the day check for device availabilty 1933 * @sc: per adapter object 1934 * 1935 * Returns nothing. 1936 */ 1937 void 1938 mps_mapping_check_devices(void *data) 1939 { 1940 u32 i; 1941 struct dev_mapping_table *mt_entry; 1942 struct mps_softc *sc = (struct mps_softc *)data; 1943 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 1944 struct enc_mapping_table *et_entry; 1945 u32 start_idx = 0, end_idx = 0; 1946 u8 stop_device_checks = 0; 1947 1948 MPS_FUNCTRACE(sc); 1949 1950 /* 1951 * Clear this flag so that this function is never called again except 1952 * within this function if the check needs to be done again. The 1953 * purpose is to check for missing devices that are currently in the 1954 * mapping table so do this only at driver init after discovery. 1955 */ 1956 sc->track_mapping_events = 0; 1957 1958 /* 1959 * callout synchronization 1960 * This is used to prevent race conditions for the callout. 1961 */ 1962 mps_dprint(sc, MPS_MAPPING, "%s: Start check for missing devices.\n", 1963 __func__); 1964 mtx_assert(&sc->mps_mtx, MA_OWNED); 1965 if ((callout_pending(&sc->device_check_callout)) || 1966 (!callout_active(&sc->device_check_callout))) { 1967 mps_dprint(sc, MPS_MAPPING, "%s: Device Check Callout is " 1968 "already pending or not active.\n", __func__); 1969 return; 1970 } 1971 callout_deactivate(&sc->device_check_callout); 1972 1973 /* 1974 * Use callout to check if any devices in the mapping table have been 1975 * processed yet. If ALL devices are marked as not init_complete, no 1976 * devices have been processed and mapped. Until devices are mapped 1977 * there's no reason to mark them as missing. Continue resetting this 1978 * callout until devices have been mapped. 1979 */ 1980 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1981 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 1982 et_entry = sc->enclosure_table; 1983 for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) { 1984 if (et_entry->init_complete) { 1985 stop_device_checks = 1; 1986 break; 1987 } 1988 } 1989 } else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 1990 MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) { 1991 mt_entry = sc->mapping_table; 1992 for (i = 0; i < sc->max_devices; i++, mt_entry++) { 1993 if (mt_entry->init_complete) { 1994 stop_device_checks = 1; 1995 break; 1996 } 1997 } 1998 } 1999 2000 /* 2001 * Setup another callout check after a delay. Keep doing this until 2002 * devices are mapped. 2003 */ 2004 if (!stop_device_checks) { 2005 mps_dprint(sc, MPS_MAPPING, "%s: No devices have been mapped. " 2006 "Reset callout to check again after a %d second delay.\n", 2007 __func__, MPS_MISSING_CHECK_DELAY); 2008 callout_reset(&sc->device_check_callout, 2009 MPS_MISSING_CHECK_DELAY * hz, mps_mapping_check_devices, 2010 sc); 2011 return; 2012 } 2013 mps_dprint(sc, MPS_MAPPING, "%s: Device check complete.\n", __func__); 2014 2015 /* 2016 * Depending on the mapping type, check if devices have been processed 2017 * and update their missing counts if not processed. 2018 */ 2019 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 2020 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) { 2021 et_entry = sc->enclosure_table; 2022 for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) { 2023 if (!et_entry->init_complete) { 2024 if (et_entry->missing_count < 2025 MPS_MAX_MISSING_COUNT) { 2026 mps_dprint(sc, MPS_MAPPING, "%s: " 2027 "Enclosure %d is missing from the " 2028 "topology. Update its missing " 2029 "count.\n", __func__, i); 2030 et_entry->missing_count++; 2031 if (et_entry->dpm_entry_num != 2032 MPS_DPM_BAD_IDX) { 2033 _mapping_commit_enc_entry(sc, 2034 et_entry); 2035 } 2036 } 2037 et_entry->init_complete = 1; 2038 } 2039 } 2040 if (!sc->ir_firmware) 2041 return; 2042 _mapping_get_ir_maprange(sc, &start_idx, &end_idx); 2043 mt_entry = &sc->mapping_table[start_idx]; 2044 } else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) == 2045 MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) { 2046 start_idx = 0; 2047 end_idx = sc->max_devices - 1; 2048 mt_entry = sc->mapping_table; 2049 } 2050 2051 /* 2052 * The start and end indices have been set above according to the 2053 * mapping type. Go through these mappings and update any entries that 2054 * do not have the init_complete flag set, which means they are missing. 2055 */ 2056 if (end_idx == 0) 2057 return; 2058 for (i = start_idx; i < (end_idx + 1); i++, mt_entry++) { 2059 if (mt_entry->device_info & MPS_DEV_RESERVED 2060 && !mt_entry->physical_id) 2061 mt_entry->init_complete = 1; 2062 else if (mt_entry->device_info & MPS_DEV_RESERVED) { 2063 if (!mt_entry->init_complete) { 2064 mps_dprint(sc, MPS_MAPPING, "%s: Device in " 2065 "mapping table at index %d is missing from " 2066 "topology. Update its missing count.\n", 2067 __func__, i); 2068 if (mt_entry->missing_count < 2069 MPS_MAX_MISSING_COUNT) { 2070 mt_entry->missing_count++; 2071 if (mt_entry->dpm_entry_num != 2072 MPS_DPM_BAD_IDX) { 2073 _mapping_commit_map_entry(sc, 2074 mt_entry); 2075 } 2076 } 2077 mt_entry->init_complete = 1; 2078 } 2079 } 2080 } 2081 } 2082 2083 /** 2084 * mps_mapping_initialize - initialize mapping tables 2085 * @sc: per adapter object 2086 * 2087 * Read controller persitant mapping tables into internal data area. 2088 * 2089 * Return 0 for success or non-zero for failure. 2090 */ 2091 int 2092 mps_mapping_initialize(struct mps_softc *sc) 2093 { 2094 uint16_t volume_mapping_flags, dpm_pg0_sz; 2095 uint32_t i; 2096 Mpi2ConfigReply_t mpi_reply; 2097 int error; 2098 uint8_t retry_count; 2099 uint16_t ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 2100 2101 /* The additional 1 accounts for the virtual enclosure 2102 * created for the controller 2103 */ 2104 sc->max_enclosures = sc->facts->MaxEnclosures + 1; 2105 sc->max_expanders = sc->facts->MaxSasExpanders; 2106 sc->max_volumes = sc->facts->MaxVolumes; 2107 sc->max_devices = sc->facts->MaxTargets + sc->max_volumes; 2108 sc->pending_map_events = 0; 2109 sc->num_enc_table_entries = 0; 2110 sc->num_rsvd_entries = 0; 2111 sc->max_dpm_entries = sc->ioc_pg8.MaxPersistentEntries; 2112 sc->is_dpm_enable = (sc->max_dpm_entries) ? 1 : 0; 2113 sc->track_mapping_events = 0; 2114 2115 mps_dprint(sc, MPS_MAPPING, "%s: Mapping table has a max of %d entries " 2116 "and DPM has a max of %d entries.\n", __func__, sc->max_devices, 2117 sc->max_dpm_entries); 2118 if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING) 2119 sc->is_dpm_enable = 0; 2120 2121 if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0) 2122 sc->num_rsvd_entries = 1; 2123 2124 volume_mapping_flags = sc->ioc_pg8.IRVolumeMappingFlags & 2125 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; 2126 if (sc->ir_firmware && (volume_mapping_flags == 2127 MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING)) 2128 sc->num_rsvd_entries += sc->max_volumes; 2129 2130 error = mps_mapping_allocate_memory(sc); 2131 if (error) 2132 return (error); 2133 2134 for (i = 0; i < sc->max_devices; i++) 2135 _mapping_clear_map_entry(sc->mapping_table + i); 2136 2137 for (i = 0; i < sc->max_enclosures; i++) 2138 _mapping_clear_enc_entry(sc->enclosure_table + i); 2139 2140 for (i = 0; i < sc->max_devices; i++) { 2141 sc->removal_table[i].dev_handle = 0; 2142 sc->removal_table[i].dpm_entry_num = MPS_DPM_BAD_IDX; 2143 } 2144 2145 memset(sc->dpm_entry_used, 0, sc->max_dpm_entries); 2146 memset(sc->dpm_flush_entry, 0, sc->max_dpm_entries); 2147 2148 if (sc->is_dpm_enable) { 2149 dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) + 2150 (sc->max_dpm_entries * 2151 sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY)); 2152 retry_count = 0; 2153 2154 retry_read_dpm: 2155 if (mps_config_get_dpm_pg0(sc, &mpi_reply, sc->dpm_pg0, 2156 dpm_pg0_sz)) { 2157 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: DPM page " 2158 "read failed.\n", __func__); 2159 if (retry_count < 3) { 2160 retry_count++; 2161 goto retry_read_dpm; 2162 } 2163 sc->is_dpm_enable = 0; 2164 } 2165 } 2166 2167 if (sc->is_dpm_enable) 2168 _mapping_process_dpm_pg0(sc); 2169 else { 2170 mps_dprint(sc, MPS_MAPPING, "%s: DPM processing is disabled. " 2171 "Device mappings will not persist across reboots or " 2172 "resets.\n", __func__); 2173 } 2174 2175 sc->track_mapping_events = 1; 2176 return 0; 2177 } 2178 2179 /** 2180 * mps_mapping_exit - clear mapping table and associated memory 2181 * @sc: per adapter object 2182 * 2183 * Returns nothing. 2184 */ 2185 void 2186 mps_mapping_exit(struct mps_softc *sc) 2187 { 2188 _mapping_flush_dpm_pages(sc); 2189 mps_mapping_free_memory(sc); 2190 } 2191 2192 /** 2193 * mps_mapping_get_tid - return the target id for sas device and handle 2194 * @sc: per adapter object 2195 * @sas_address: sas address of the device 2196 * @handle: device handle 2197 * 2198 * Returns valid target ID on success or BAD_ID. 2199 */ 2200 unsigned int 2201 mps_mapping_get_tid(struct mps_softc *sc, uint64_t sas_address, u16 handle) 2202 { 2203 u32 map_idx; 2204 struct dev_mapping_table *mt_entry; 2205 2206 for (map_idx = 0; map_idx < sc->max_devices; map_idx++) { 2207 mt_entry = &sc->mapping_table[map_idx]; 2208 if (mt_entry->dev_handle == handle && mt_entry->physical_id == 2209 sas_address) 2210 return mt_entry->id; 2211 } 2212 2213 return MPS_MAP_BAD_ID; 2214 } 2215 2216 /** 2217 * mps_mapping_get_tid_from_handle - find a target id in mapping table using 2218 * only the dev handle. This is just a wrapper function for the local function 2219 * _mapping_get_mt_idx_from_handle. 2220 * @sc: per adapter object 2221 * @handle: device handle 2222 * 2223 * Returns valid target ID on success or BAD_ID. 2224 */ 2225 unsigned int 2226 mps_mapping_get_tid_from_handle(struct mps_softc *sc, u16 handle) 2227 { 2228 return (_mapping_get_mt_idx_from_handle(sc, handle)); 2229 } 2230 2231 /** 2232 * mps_mapping_get_raid_tid - return the target id for raid device 2233 * @sc: per adapter object 2234 * @wwid: world wide identifier for raid volume 2235 * @volHandle: volume device handle 2236 * 2237 * Returns valid target ID on success or BAD_ID. 2238 */ 2239 unsigned int 2240 mps_mapping_get_raid_tid(struct mps_softc *sc, u64 wwid, u16 volHandle) 2241 { 2242 u32 start_idx, end_idx, map_idx; 2243 struct dev_mapping_table *mt_entry; 2244 2245 _mapping_get_ir_maprange(sc, &start_idx, &end_idx); 2246 mt_entry = &sc->mapping_table[start_idx]; 2247 for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) { 2248 if (mt_entry->dev_handle == volHandle && 2249 mt_entry->physical_id == wwid) 2250 return mt_entry->id; 2251 } 2252 2253 return MPS_MAP_BAD_ID; 2254 } 2255 2256 /** 2257 * mps_mapping_get_raid_tid_from_handle - find raid device in mapping table 2258 * using only the volume dev handle. This is just a wrapper function for the 2259 * local function _mapping_get_ir_mt_idx_from_handle. 2260 * @sc: per adapter object 2261 * @volHandle: volume device handle 2262 * 2263 * Returns valid target ID on success or BAD_ID. 2264 */ 2265 unsigned int 2266 mps_mapping_get_raid_tid_from_handle(struct mps_softc *sc, u16 volHandle) 2267 { 2268 return (_mapping_get_ir_mt_idx_from_handle(sc, volHandle)); 2269 } 2270 2271 /** 2272 * mps_mapping_enclosure_dev_status_change_event - handle enclosure events 2273 * @sc: per adapter object 2274 * @event_data: event data payload 2275 * 2276 * Return nothing. 2277 */ 2278 void 2279 mps_mapping_enclosure_dev_status_change_event(struct mps_softc *sc, 2280 Mpi2EventDataSasEnclDevStatusChange_t *event_data) 2281 { 2282 u8 enc_idx, missing_count; 2283 struct enc_mapping_table *et_entry; 2284 Mpi2DriverMap0Entry_t *dpm_entry; 2285 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 2286 u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT; 2287 u8 update_phy_bits = 0; 2288 u32 saved_phy_bits; 2289 uint64_t temp64_var; 2290 2291 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) != 2292 MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) 2293 goto out; 2294 2295 dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 + 2296 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); 2297 2298 if (event_data->ReasonCode == MPI2_EVENT_SAS_ENCL_RC_ADDED) { 2299 if (!event_data->NumSlots) { 2300 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Enclosure " 2301 "with handle = 0x%x reported 0 slots.\n", __func__, 2302 le16toh(event_data->EnclosureHandle)); 2303 goto out; 2304 } 2305 temp64_var = event_data->EnclosureLogicalID.High; 2306 temp64_var = (temp64_var << 32) | 2307 event_data->EnclosureLogicalID.Low; 2308 enc_idx = _mapping_get_enc_idx_from_id(sc, temp64_var, 2309 event_data->PhyBits); 2310 2311 /* 2312 * If the Added enclosure is already in the Enclosure Table, 2313 * make sure that all the the enclosure info is up to date. If 2314 * the enclosure was missing and has just been added back, or if 2315 * the enclosure's Phy Bits have changed, clear the missing 2316 * count and update the Phy Bits in the mapping table and in the 2317 * DPM, if it's being used. 2318 */ 2319 if (enc_idx != MPS_ENCTABLE_BAD_IDX) { 2320 et_entry = &sc->enclosure_table[enc_idx]; 2321 if (et_entry->init_complete && 2322 !et_entry->missing_count) { 2323 mps_dprint(sc, MPS_MAPPING, "%s: Enclosure %d " 2324 "is already present with handle = 0x%x\n", 2325 __func__, enc_idx, et_entry->enc_handle); 2326 goto out; 2327 } 2328 et_entry->enc_handle = le16toh(event_data-> 2329 EnclosureHandle); 2330 et_entry->start_slot = le16toh(event_data->StartSlot); 2331 saved_phy_bits = et_entry->phy_bits; 2332 et_entry->phy_bits |= le32toh(event_data->PhyBits); 2333 if (saved_phy_bits != et_entry->phy_bits) 2334 update_phy_bits = 1; 2335 if (et_entry->missing_count || update_phy_bits) { 2336 et_entry->missing_count = 0; 2337 if (sc->is_dpm_enable && 2338 et_entry->dpm_entry_num != 2339 MPS_DPM_BAD_IDX) { 2340 dpm_entry += et_entry->dpm_entry_num; 2341 missing_count = 2342 (u8)(dpm_entry->MappingInformation & 2343 MPI2_DRVMAP0_MAPINFO_MISSING_MASK); 2344 if (missing_count || update_phy_bits) { 2345 dpm_entry->MappingInformation 2346 = et_entry->num_slots; 2347 dpm_entry->MappingInformation 2348 <<= map_shift; 2349 dpm_entry->PhysicalBitsMapping 2350 = et_entry->phy_bits; 2351 sc->dpm_flush_entry[et_entry-> 2352 dpm_entry_num] = 1; 2353 } 2354 } 2355 } 2356 } else { 2357 /* 2358 * This is a new enclosure that is being added. 2359 * Initialize the Enclosure Table entry. It will be 2360 * finalized when a device is added for the enclosure 2361 * and the enclosure has enough space in the Mapping 2362 * Table to map its devices. 2363 */ 2364 if (sc->num_enc_table_entries < sc->max_enclosures) { 2365 enc_idx = sc->num_enc_table_entries; 2366 sc->num_enc_table_entries++; 2367 } else { 2368 enc_idx = _mapping_get_high_missing_et_idx(sc); 2369 if (enc_idx != MPS_ENCTABLE_BAD_IDX) { 2370 et_entry = &sc->enclosure_table[enc_idx]; 2371 _mapping_add_to_removal_table(sc, 2372 et_entry->dpm_entry_num); 2373 _mapping_clear_enc_entry(et_entry); 2374 } 2375 } 2376 if (enc_idx == MPS_ENCTABLE_BAD_IDX) { 2377 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: " 2378 "Enclosure cannot be added to mapping " 2379 "table because it's full.\n", __func__); 2380 goto out; 2381 } 2382 et_entry = &sc->enclosure_table[enc_idx]; 2383 et_entry->enc_handle = le16toh(event_data-> 2384 EnclosureHandle); 2385 et_entry->enclosure_id = le64toh(event_data-> 2386 EnclosureLogicalID.High); 2387 et_entry->enclosure_id = 2388 ((et_entry->enclosure_id << 32) | 2389 le64toh(event_data->EnclosureLogicalID.Low)); 2390 et_entry->start_index = MPS_MAPTABLE_BAD_IDX; 2391 et_entry->dpm_entry_num = MPS_DPM_BAD_IDX; 2392 et_entry->num_slots = le16toh(event_data->NumSlots); 2393 et_entry->start_slot = le16toh(event_data->StartSlot); 2394 et_entry->phy_bits = le32toh(event_data->PhyBits); 2395 } 2396 et_entry->init_complete = 1; 2397 } else if (event_data->ReasonCode == 2398 MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING) { 2399 /* 2400 * An enclosure was removed. Update its missing count and then 2401 * update the DPM entry with the new missing count for the 2402 * enclosure. 2403 */ 2404 enc_idx = _mapping_get_enc_idx_from_handle(sc, 2405 le16toh(event_data->EnclosureHandle)); 2406 if (enc_idx == MPS_ENCTABLE_BAD_IDX) { 2407 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Cannot " 2408 "unmap enclosure with handle 0x%04x because it " 2409 "has already been deleted.\n", __func__, 2410 le16toh(event_data->EnclosureHandle)); 2411 goto out; 2412 } 2413 et_entry = &sc->enclosure_table[enc_idx]; 2414 if (et_entry->missing_count < MPS_MAX_MISSING_COUNT) 2415 et_entry->missing_count++; 2416 if (sc->is_dpm_enable && 2417 et_entry->dpm_entry_num != MPS_DPM_BAD_IDX) { 2418 dpm_entry += et_entry->dpm_entry_num; 2419 dpm_entry->MappingInformation = et_entry->num_slots; 2420 dpm_entry->MappingInformation <<= map_shift; 2421 dpm_entry->MappingInformation |= 2422 et_entry->missing_count; 2423 sc->dpm_flush_entry[et_entry->dpm_entry_num] = 1; 2424 } 2425 et_entry->init_complete = 1; 2426 } 2427 2428 out: 2429 _mapping_flush_dpm_pages(sc); 2430 if (sc->pending_map_events) 2431 sc->pending_map_events--; 2432 } 2433 2434 /** 2435 * mps_mapping_topology_change_event - handle topology change events 2436 * @sc: per adapter object 2437 * @event_data: event data payload 2438 * 2439 * Returns nothing. 2440 */ 2441 void 2442 mps_mapping_topology_change_event(struct mps_softc *sc, 2443 Mpi2EventDataSasTopologyChangeList_t *event_data) 2444 { 2445 struct _map_topology_change topo_change; 2446 struct _map_phy_change *phy_change; 2447 Mpi2EventSasTopoPhyEntry_t *event_phy_change; 2448 u8 i, num_entries; 2449 2450 topo_change.enc_handle = le16toh(event_data->EnclosureHandle); 2451 topo_change.exp_handle = le16toh(event_data->ExpanderDevHandle); 2452 num_entries = event_data->NumEntries; 2453 topo_change.num_entries = num_entries; 2454 topo_change.start_phy_num = event_data->StartPhyNum; 2455 topo_change.num_phys = event_data->NumPhys; 2456 topo_change.exp_status = event_data->ExpStatus; 2457 event_phy_change = event_data->PHY; 2458 topo_change.phy_details = NULL; 2459 2460 if (!num_entries) 2461 goto out; 2462 phy_change = malloc(sizeof(struct _map_phy_change) * num_entries, 2463 M_MPT2, M_NOWAIT|M_ZERO); 2464 topo_change.phy_details = phy_change; 2465 if (!phy_change) 2466 goto out; 2467 for (i = 0; i < num_entries; i++, event_phy_change++, phy_change++) { 2468 phy_change->dev_handle = le16toh(event_phy_change-> 2469 AttachedDevHandle); 2470 phy_change->reason = event_phy_change->PhyStatus & 2471 MPI2_EVENT_SAS_TOPO_RC_MASK; 2472 } 2473 _mapping_update_missing_count(sc, &topo_change); 2474 _mapping_get_dev_info(sc, &topo_change); 2475 _mapping_clear_removed_entries(sc); 2476 _mapping_add_new_device(sc, &topo_change); 2477 2478 out: 2479 free(topo_change.phy_details, M_MPT2); 2480 _mapping_flush_dpm_pages(sc); 2481 if (sc->pending_map_events) 2482 sc->pending_map_events--; 2483 } 2484 2485 /** 2486 * mps_mapping_ir_config_change_event - handle IR config change list events 2487 * @sc: per adapter object 2488 * @event_data: event data payload 2489 * 2490 * Returns nothing. 2491 */ 2492 void 2493 mps_mapping_ir_config_change_event(struct mps_softc *sc, 2494 Mpi2EventDataIrConfigChangeList_t *event_data) 2495 { 2496 Mpi2EventIrConfigElement_t *element; 2497 int i; 2498 u64 *wwid_table; 2499 u32 map_idx, flags; 2500 struct dev_mapping_table *mt_entry; 2501 u16 element_flags; 2502 2503 wwid_table = malloc(sizeof(u64) * event_data->NumElements, M_MPT2, 2504 M_NOWAIT | M_ZERO); 2505 if (!wwid_table) 2506 goto out; 2507 element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; 2508 flags = le32toh(event_data->Flags); 2509 2510 /* 2511 * For volume changes, get the WWID for the volume and put it in a 2512 * table to be used in the processing of the IR change event. 2513 */ 2514 for (i = 0; i < event_data->NumElements; i++, element++) { 2515 element_flags = le16toh(element->ElementFlags); 2516 if ((element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_ADDED) && 2517 (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_REMOVED) && 2518 (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE) 2519 && (element->ReasonCode != 2520 MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED)) 2521 continue; 2522 if ((element_flags & 2523 MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) == 2524 MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT) { 2525 mps_config_get_volume_wwid(sc, 2526 le16toh(element->VolDevHandle), &wwid_table[i]); 2527 } 2528 } 2529 2530 /* 2531 * Check the ReasonCode for each element in the IR event and Add/Remove 2532 * Volumes or Physical Disks of Volumes to/from the mapping table. Use 2533 * the WWIDs gotten above in wwid_table. 2534 */ 2535 if (flags == MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) 2536 goto out; 2537 else { 2538 element = (Mpi2EventIrConfigElement_t *)&event_data-> 2539 ConfigElement[0]; 2540 for (i = 0; i < event_data->NumElements; i++, element++) { 2541 if (element->ReasonCode == 2542 MPI2_EVENT_IR_CHANGE_RC_ADDED || 2543 element->ReasonCode == 2544 MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) { 2545 map_idx = _mapping_get_ir_mt_idx_from_wwid 2546 (sc, wwid_table[i]); 2547 if (map_idx != MPS_MAPTABLE_BAD_IDX) { 2548 /* 2549 * The volume is already in the mapping 2550 * table. Just update it's info. 2551 */ 2552 mt_entry = &sc->mapping_table[map_idx]; 2553 mt_entry->id = map_idx; 2554 mt_entry->dev_handle = le16toh 2555 (element->VolDevHandle); 2556 mt_entry->device_info = 2557 MPS_DEV_RESERVED | MPS_MAP_IN_USE; 2558 _mapping_update_ir_missing_cnt(sc, 2559 map_idx, element, wwid_table[i]); 2560 continue; 2561 } 2562 2563 /* 2564 * Volume is not in mapping table yet. Find a 2565 * free entry in the mapping table at the 2566 * volume mapping locations. If no entries are 2567 * available, this is an error because it means 2568 * there are more volumes than can be mapped 2569 * and that should never happen for volumes. 2570 */ 2571 map_idx = _mapping_get_free_ir_mt_idx(sc); 2572 if (map_idx == MPS_MAPTABLE_BAD_IDX) 2573 { 2574 mps_dprint(sc, MPS_ERROR | MPS_MAPPING, 2575 "%s: failed to add the volume with " 2576 "handle 0x%04x because there is no " 2577 "free space available in the " 2578 "mapping table\n", __func__, 2579 le16toh(element->VolDevHandle)); 2580 continue; 2581 } 2582 mt_entry = &sc->mapping_table[map_idx]; 2583 mt_entry->physical_id = wwid_table[i]; 2584 mt_entry->id = map_idx; 2585 mt_entry->dev_handle = le16toh(element-> 2586 VolDevHandle); 2587 mt_entry->device_info = MPS_DEV_RESERVED | 2588 MPS_MAP_IN_USE; 2589 _mapping_update_ir_missing_cnt(sc, map_idx, 2590 element, wwid_table[i]); 2591 } else if (element->ReasonCode == 2592 MPI2_EVENT_IR_CHANGE_RC_REMOVED) { 2593 map_idx = _mapping_get_ir_mt_idx_from_wwid(sc, 2594 wwid_table[i]); 2595 if (map_idx == MPS_MAPTABLE_BAD_IDX) { 2596 mps_dprint(sc, MPS_MAPPING,"%s: Failed " 2597 "to remove a volume because it has " 2598 "already been removed.\n", 2599 __func__); 2600 continue; 2601 } 2602 _mapping_update_ir_missing_cnt(sc, map_idx, 2603 element, wwid_table[i]); 2604 } else if (element->ReasonCode == 2605 MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) { 2606 map_idx = _mapping_get_mt_idx_from_handle(sc, 2607 le16toh(element->VolDevHandle)); 2608 if (map_idx == MPS_MAPTABLE_BAD_IDX) { 2609 mps_dprint(sc, MPS_MAPPING,"%s: Failed " 2610 "to remove volume with handle " 2611 "0x%04x because it has already " 2612 "been removed.\n", __func__, 2613 le16toh(element->VolDevHandle)); 2614 continue; 2615 } 2616 mt_entry = &sc->mapping_table[map_idx]; 2617 _mapping_update_ir_missing_cnt(sc, map_idx, 2618 element, mt_entry->physical_id); 2619 } 2620 } 2621 } 2622 2623 out: 2624 _mapping_flush_dpm_pages(sc); 2625 free(wwid_table, M_MPT2); 2626 if (sc->pending_map_events) 2627 sc->pending_map_events--; 2628 } 2629 2630 int 2631 mps_mapping_dump(SYSCTL_HANDLER_ARGS) 2632 { 2633 struct mps_softc *sc; 2634 struct dev_mapping_table *mt_entry; 2635 struct sbuf sbuf; 2636 int i, error; 2637 2638 sc = (struct mps_softc *)arg1; 2639 2640 error = sysctl_wire_old_buffer(req, 0); 2641 if (error != 0) 2642 return (error); 2643 sbuf_new_for_sysctl(&sbuf, NULL, 128, req); 2644 2645 sbuf_printf(&sbuf, "\nindex physical_id handle id\n"); 2646 for (i = 0; i < sc->max_devices; i++) { 2647 mt_entry = &sc->mapping_table[i]; 2648 if (mt_entry->physical_id == 0) 2649 continue; 2650 sbuf_printf(&sbuf, "%4d %jx %04x %hd\n", 2651 i, mt_entry->physical_id, mt_entry->dev_handle, 2652 mt_entry->id); 2653 } 2654 error = sbuf_finish(&sbuf); 2655 sbuf_delete(&sbuf); 2656 return (error); 2657 } 2658 2659 int 2660 mps_mapping_encl_dump(SYSCTL_HANDLER_ARGS) 2661 { 2662 struct mps_softc *sc; 2663 struct enc_mapping_table *enc_entry; 2664 struct sbuf sbuf; 2665 int i, error; 2666 2667 sc = (struct mps_softc *)arg1; 2668 2669 error = sysctl_wire_old_buffer(req, 0); 2670 if (error != 0) 2671 return (error); 2672 sbuf_new_for_sysctl(&sbuf, NULL, 128, req); 2673 2674 sbuf_printf(&sbuf, "\nindex enclosure_id handle map_index\n"); 2675 for (i = 0; i < sc->max_enclosures; i++) { 2676 enc_entry = &sc->enclosure_table[i]; 2677 if (enc_entry->enclosure_id == 0) 2678 continue; 2679 sbuf_printf(&sbuf, "%4d %jx %04x %d\n", 2680 i, enc_entry->enclosure_id, enc_entry->enc_handle, 2681 enc_entry->start_index); 2682 } 2683 error = sbuf_finish(&sbuf); 2684 sbuf_delete(&sbuf); 2685 return (error); 2686 } 2687