1 /*- 2 * Copyright (c) 2009 Yahoo! Inc. 3 * Copyright (c) 2011-2015 LSI Corp. 4 * Copyright (c) 2013-2015 Avago Technologies 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 29 * 30 * $FreeBSD$ 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 /* Communications core for Avago Technologies (LSI) MPT2 */ 37 38 /* TODO Move headers to mpsvar */ 39 #include <sys/types.h> 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/kernel.h> 43 #include <sys/selinfo.h> 44 #include <sys/lock.h> 45 #include <sys/mutex.h> 46 #include <sys/module.h> 47 #include <sys/bus.h> 48 #include <sys/conf.h> 49 #include <sys/bio.h> 50 #include <sys/malloc.h> 51 #include <sys/uio.h> 52 #include <sys/sysctl.h> 53 #include <sys/queue.h> 54 #include <sys/kthread.h> 55 #include <sys/taskqueue.h> 56 #include <sys/endian.h> 57 #include <sys/eventhandler.h> 58 59 #include <machine/bus.h> 60 #include <machine/resource.h> 61 #include <sys/rman.h> 62 #include <sys/proc.h> 63 64 #include <dev/pci/pcivar.h> 65 66 #include <cam/cam.h> 67 #include <cam/scsi/scsi_all.h> 68 69 #include <dev/mps/mpi/mpi2_type.h> 70 #include <dev/mps/mpi/mpi2.h> 71 #include <dev/mps/mpi/mpi2_ioc.h> 72 #include <dev/mps/mpi/mpi2_sas.h> 73 #include <dev/mps/mpi/mpi2_cnfg.h> 74 #include <dev/mps/mpi/mpi2_init.h> 75 #include <dev/mps/mpi/mpi2_tool.h> 76 #include <dev/mps/mps_ioctl.h> 77 #include <dev/mps/mpsvar.h> 78 #include <dev/mps/mps_table.h> 79 80 static int mps_diag_reset(struct mps_softc *sc, int sleep_flag); 81 static int mps_init_queues(struct mps_softc *sc); 82 static int mps_message_unit_reset(struct mps_softc *sc, int sleep_flag); 83 static int mps_transition_operational(struct mps_softc *sc); 84 static int mps_iocfacts_allocate(struct mps_softc *sc, uint8_t attaching); 85 static void mps_iocfacts_free(struct mps_softc *sc); 86 static void mps_startup(void *arg); 87 static int mps_send_iocinit(struct mps_softc *sc); 88 static int mps_alloc_queues(struct mps_softc *sc); 89 static int mps_alloc_replies(struct mps_softc *sc); 90 static int mps_alloc_requests(struct mps_softc *sc); 91 static int mps_attach_log(struct mps_softc *sc); 92 static __inline void mps_complete_command(struct mps_softc *sc, 93 struct mps_command *cm); 94 static void mps_dispatch_event(struct mps_softc *sc, uintptr_t data, 95 MPI2_EVENT_NOTIFICATION_REPLY *reply); 96 static void mps_config_complete(struct mps_softc *sc, struct mps_command *cm); 97 static void mps_periodic(void *); 98 static int mps_reregister_events(struct mps_softc *sc); 99 static void mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm); 100 static int mps_get_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts); 101 static int mps_wait_db_ack(struct mps_softc *sc, int timeout, int sleep_flag); 102 SYSCTL_NODE(_hw, OID_AUTO, mps, CTLFLAG_RD, 0, "MPS Driver Parameters"); 103 104 MALLOC_DEFINE(M_MPT2, "mps", "mpt2 driver memory"); 105 106 /* 107 * Do a "Diagnostic Reset" aka a hard reset. This should get the chip out of 108 * any state and back to its initialization state machine. 109 */ 110 static char mpt2_reset_magic[] = { 0x00, 0x0f, 0x04, 0x0b, 0x02, 0x07, 0x0d }; 111 112 /* Added this union to smoothly convert le64toh cm->cm_desc.Words. 113 * Compiler only support unint64_t to be passed as argument. 114 * Otherwise it will through below error 115 * "aggregate value used where an integer was expected" 116 */ 117 118 typedef union _reply_descriptor { 119 u64 word; 120 struct { 121 u32 low; 122 u32 high; 123 } u; 124 }reply_descriptor,address_descriptor; 125 126 /* Rate limit chain-fail messages to 1 per minute */ 127 static struct timeval mps_chainfail_interval = { 60, 0 }; 128 129 /* 130 * sleep_flag can be either CAN_SLEEP or NO_SLEEP. 131 * If this function is called from process context, it can sleep 132 * and there is no harm to sleep, in case if this fuction is called 133 * from Interrupt handler, we can not sleep and need NO_SLEEP flag set. 134 * based on sleep flags driver will call either msleep, pause or DELAY. 135 * msleep and pause are of same variant, but pause is used when mps_mtx 136 * is not hold by driver. 137 * 138 */ 139 static int 140 mps_diag_reset(struct mps_softc *sc,int sleep_flag) 141 { 142 uint32_t reg; 143 int i, error, tries = 0; 144 uint8_t first_wait_done = FALSE; 145 146 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 147 148 /* Clear any pending interrupts */ 149 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 150 151 /*Force NO_SLEEP for threads prohibited to sleep 152 * e.a Thread from interrupt handler are prohibited to sleep. 153 */ 154 if (curthread->td_no_sleeping != 0) 155 sleep_flag = NO_SLEEP; 156 157 /* Push the magic sequence */ 158 error = ETIMEDOUT; 159 while (tries++ < 20) { 160 for (i = 0; i < sizeof(mpt2_reset_magic); i++) 161 mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 162 mpt2_reset_magic[i]); 163 /* wait 100 msec */ 164 if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) 165 msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, 166 "mpsdiag", hz/10); 167 else if (sleep_flag == CAN_SLEEP) 168 pause("mpsdiag", hz/10); 169 else 170 DELAY(100 * 1000); 171 172 reg = mps_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); 173 if (reg & MPI2_DIAG_DIAG_WRITE_ENABLE) { 174 error = 0; 175 break; 176 } 177 } 178 if (error) 179 return (error); 180 181 /* Send the actual reset. XXX need to refresh the reg? */ 182 mps_regwrite(sc, MPI2_HOST_DIAGNOSTIC_OFFSET, 183 reg | MPI2_DIAG_RESET_ADAPTER); 184 185 /* Wait up to 300 seconds in 50ms intervals */ 186 error = ETIMEDOUT; 187 for (i = 0; i < 6000; i++) { 188 /* 189 * Wait 50 msec. If this is the first time through, wait 256 190 * msec to satisfy Diag Reset timing requirements. 191 */ 192 if (first_wait_done) { 193 if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) 194 msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, 195 "mpsdiag", hz/20); 196 else if (sleep_flag == CAN_SLEEP) 197 pause("mpsdiag", hz/20); 198 else 199 DELAY(50 * 1000); 200 } else { 201 DELAY(256 * 1000); 202 first_wait_done = TRUE; 203 } 204 /* 205 * Check for the RESET_ADAPTER bit to be cleared first, then 206 * wait for the RESET state to be cleared, which takes a little 207 * longer. 208 */ 209 reg = mps_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); 210 if (reg & MPI2_DIAG_RESET_ADAPTER) { 211 continue; 212 } 213 reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); 214 if ((reg & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_RESET) { 215 error = 0; 216 break; 217 } 218 } 219 if (error) 220 return (error); 221 222 mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 0x0); 223 224 return (0); 225 } 226 227 static int 228 mps_message_unit_reset(struct mps_softc *sc, int sleep_flag) 229 { 230 231 MPS_FUNCTRACE(sc); 232 233 mps_regwrite(sc, MPI2_DOORBELL_OFFSET, 234 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET << 235 MPI2_DOORBELL_FUNCTION_SHIFT); 236 237 if (mps_wait_db_ack(sc, 5, sleep_flag) != 0) { 238 mps_dprint(sc, MPS_FAULT, "Doorbell handshake failed : <%s>\n", 239 __func__); 240 return (ETIMEDOUT); 241 } 242 243 return (0); 244 } 245 246 static int 247 mps_transition_ready(struct mps_softc *sc) 248 { 249 uint32_t reg, state; 250 int error, tries = 0; 251 int sleep_flags; 252 253 MPS_FUNCTRACE(sc); 254 /* If we are in attach call, do not sleep */ 255 sleep_flags = (sc->mps_flags & MPS_FLAGS_ATTACH_DONE) 256 ? CAN_SLEEP:NO_SLEEP; 257 error = 0; 258 while (tries++ < 1200) { 259 reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); 260 mps_dprint(sc, MPS_INIT, "Doorbell= 0x%x\n", reg); 261 262 /* 263 * Ensure the IOC is ready to talk. If it's not, try 264 * resetting it. 265 */ 266 if (reg & MPI2_DOORBELL_USED) { 267 mps_diag_reset(sc, sleep_flags); 268 DELAY(50000); 269 continue; 270 } 271 272 /* Is the adapter owned by another peer? */ 273 if ((reg & MPI2_DOORBELL_WHO_INIT_MASK) == 274 (MPI2_WHOINIT_PCI_PEER << MPI2_DOORBELL_WHO_INIT_SHIFT)) { 275 device_printf(sc->mps_dev, "IOC is under the control " 276 "of another peer host, aborting initialization.\n"); 277 return (ENXIO); 278 } 279 280 state = reg & MPI2_IOC_STATE_MASK; 281 if (state == MPI2_IOC_STATE_READY) { 282 /* Ready to go! */ 283 error = 0; 284 break; 285 } else if (state == MPI2_IOC_STATE_FAULT) { 286 mps_dprint(sc, MPS_FAULT, "IOC in fault state 0x%x, resetting\n", 287 state & MPI2_DOORBELL_FAULT_CODE_MASK); 288 mps_diag_reset(sc, sleep_flags); 289 } else if (state == MPI2_IOC_STATE_OPERATIONAL) { 290 /* Need to take ownership */ 291 mps_message_unit_reset(sc, sleep_flags); 292 } else if (state == MPI2_IOC_STATE_RESET) { 293 /* Wait a bit, IOC might be in transition */ 294 mps_dprint(sc, MPS_FAULT, 295 "IOC in unexpected reset state\n"); 296 } else { 297 mps_dprint(sc, MPS_FAULT, 298 "IOC in unknown state 0x%x\n", state); 299 error = EINVAL; 300 break; 301 } 302 303 /* Wait 50ms for things to settle down. */ 304 DELAY(50000); 305 } 306 307 if (error) 308 device_printf(sc->mps_dev, "Cannot transition IOC to ready\n"); 309 310 return (error); 311 } 312 313 static int 314 mps_transition_operational(struct mps_softc *sc) 315 { 316 uint32_t reg, state; 317 int error; 318 319 MPS_FUNCTRACE(sc); 320 321 error = 0; 322 reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); 323 mps_dprint(sc, MPS_INIT, "Doorbell= 0x%x\n", reg); 324 325 state = reg & MPI2_IOC_STATE_MASK; 326 if (state != MPI2_IOC_STATE_READY) { 327 if ((error = mps_transition_ready(sc)) != 0) { 328 mps_dprint(sc, MPS_FAULT, 329 "%s failed to transition ready\n", __func__); 330 return (error); 331 } 332 } 333 334 error = mps_send_iocinit(sc); 335 return (error); 336 } 337 338 /* 339 * This is called during attach and when re-initializing due to a Diag Reset. 340 * IOC Facts is used to allocate many of the structures needed by the driver. 341 * If called from attach, de-allocation is not required because the driver has 342 * not allocated any structures yet, but if called from a Diag Reset, previously 343 * allocated structures based on IOC Facts will need to be freed and re- 344 * allocated bases on the latest IOC Facts. 345 */ 346 static int 347 mps_iocfacts_allocate(struct mps_softc *sc, uint8_t attaching) 348 { 349 int error; 350 Mpi2IOCFactsReply_t saved_facts; 351 uint8_t saved_mode, reallocating; 352 353 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 354 355 /* Save old IOC Facts and then only reallocate if Facts have changed */ 356 if (!attaching) { 357 bcopy(sc->facts, &saved_facts, sizeof(MPI2_IOC_FACTS_REPLY)); 358 } 359 360 /* 361 * Get IOC Facts. In all cases throughout this function, panic if doing 362 * a re-initialization and only return the error if attaching so the OS 363 * can handle it. 364 */ 365 if ((error = mps_get_iocfacts(sc, sc->facts)) != 0) { 366 if (attaching) { 367 mps_dprint(sc, MPS_FAULT, "%s failed to get IOC Facts " 368 "with error %d\n", __func__, error); 369 return (error); 370 } else { 371 panic("%s failed to get IOC Facts with error %d\n", 372 __func__, error); 373 } 374 } 375 376 mps_print_iocfacts(sc, sc->facts); 377 378 snprintf(sc->fw_version, sizeof(sc->fw_version), 379 "%02d.%02d.%02d.%02d", 380 sc->facts->FWVersion.Struct.Major, 381 sc->facts->FWVersion.Struct.Minor, 382 sc->facts->FWVersion.Struct.Unit, 383 sc->facts->FWVersion.Struct.Dev); 384 385 mps_printf(sc, "Firmware: %s, Driver: %s\n", sc->fw_version, 386 MPS_DRIVER_VERSION); 387 mps_printf(sc, "IOCCapabilities: %b\n", sc->facts->IOCCapabilities, 388 "\20" "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf" 389 "\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR" 390 "\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc"); 391 392 /* 393 * If the chip doesn't support event replay then a hard reset will be 394 * required to trigger a full discovery. Do the reset here then 395 * retransition to Ready. A hard reset might have already been done, 396 * but it doesn't hurt to do it again. Only do this if attaching, not 397 * for a Diag Reset. 398 */ 399 if (attaching) { 400 if ((sc->facts->IOCCapabilities & 401 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY) == 0) { 402 mps_diag_reset(sc, NO_SLEEP); 403 if ((error = mps_transition_ready(sc)) != 0) { 404 mps_dprint(sc, MPS_FAULT, "%s failed to " 405 "transition to ready with error %d\n", 406 __func__, error); 407 return (error); 408 } 409 } 410 } 411 412 /* 413 * Set flag if IR Firmware is loaded. If the RAID Capability has 414 * changed from the previous IOC Facts, log a warning, but only if 415 * checking this after a Diag Reset and not during attach. 416 */ 417 saved_mode = sc->ir_firmware; 418 if (sc->facts->IOCCapabilities & 419 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) 420 sc->ir_firmware = 1; 421 if (!attaching) { 422 if (sc->ir_firmware != saved_mode) { 423 mps_dprint(sc, MPS_FAULT, "%s new IR/IT mode in IOC " 424 "Facts does not match previous mode\n", __func__); 425 } 426 } 427 428 /* Only deallocate and reallocate if relevant IOC Facts have changed */ 429 reallocating = FALSE; 430 if ((!attaching) && 431 ((saved_facts.MsgVersion != sc->facts->MsgVersion) || 432 (saved_facts.HeaderVersion != sc->facts->HeaderVersion) || 433 (saved_facts.MaxChainDepth != sc->facts->MaxChainDepth) || 434 (saved_facts.RequestCredit != sc->facts->RequestCredit) || 435 (saved_facts.ProductID != sc->facts->ProductID) || 436 (saved_facts.IOCCapabilities != sc->facts->IOCCapabilities) || 437 (saved_facts.IOCRequestFrameSize != 438 sc->facts->IOCRequestFrameSize) || 439 (saved_facts.MaxTargets != sc->facts->MaxTargets) || 440 (saved_facts.MaxSasExpanders != sc->facts->MaxSasExpanders) || 441 (saved_facts.MaxEnclosures != sc->facts->MaxEnclosures) || 442 (saved_facts.HighPriorityCredit != sc->facts->HighPriorityCredit) || 443 (saved_facts.MaxReplyDescriptorPostQueueDepth != 444 sc->facts->MaxReplyDescriptorPostQueueDepth) || 445 (saved_facts.ReplyFrameSize != sc->facts->ReplyFrameSize) || 446 (saved_facts.MaxVolumes != sc->facts->MaxVolumes) || 447 (saved_facts.MaxPersistentEntries != 448 sc->facts->MaxPersistentEntries))) { 449 reallocating = TRUE; 450 } 451 452 /* 453 * Some things should be done if attaching or re-allocating after a Diag 454 * Reset, but are not needed after a Diag Reset if the FW has not 455 * changed. 456 */ 457 if (attaching || reallocating) { 458 /* 459 * Check if controller supports FW diag buffers and set flag to 460 * enable each type. 461 */ 462 if (sc->facts->IOCCapabilities & 463 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) 464 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_TRACE]. 465 enabled = TRUE; 466 if (sc->facts->IOCCapabilities & 467 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) 468 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_SNAPSHOT]. 469 enabled = TRUE; 470 if (sc->facts->IOCCapabilities & 471 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) 472 sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_EXTENDED]. 473 enabled = TRUE; 474 475 /* 476 * Set flag if EEDP is supported and if TLR is supported. 477 */ 478 if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) 479 sc->eedp_enabled = TRUE; 480 if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) 481 sc->control_TLR = TRUE; 482 483 /* 484 * Size the queues. Since the reply queues always need one free 485 * entry, we'll just deduct one reply message here. 486 */ 487 sc->num_reqs = MIN(MPS_REQ_FRAMES, sc->facts->RequestCredit); 488 sc->num_replies = MIN(MPS_REPLY_FRAMES + MPS_EVT_REPLY_FRAMES, 489 sc->facts->MaxReplyDescriptorPostQueueDepth) - 1; 490 491 /* 492 * Initialize all Tail Queues 493 */ 494 TAILQ_INIT(&sc->req_list); 495 TAILQ_INIT(&sc->high_priority_req_list); 496 TAILQ_INIT(&sc->chain_list); 497 TAILQ_INIT(&sc->tm_list); 498 } 499 500 /* 501 * If doing a Diag Reset and the FW is significantly different 502 * (reallocating will be set above in IOC Facts comparison), then all 503 * buffers based on the IOC Facts will need to be freed before they are 504 * reallocated. 505 */ 506 if (reallocating) { 507 mps_iocfacts_free(sc); 508 mpssas_realloc_targets(sc, saved_facts.MaxTargets); 509 } 510 511 /* 512 * Any deallocation has been completed. Now start reallocating 513 * if needed. Will only need to reallocate if attaching or if the new 514 * IOC Facts are different from the previous IOC Facts after a Diag 515 * Reset. Targets have already been allocated above if needed. 516 */ 517 if (attaching || reallocating) { 518 if (((error = mps_alloc_queues(sc)) != 0) || 519 ((error = mps_alloc_replies(sc)) != 0) || 520 ((error = mps_alloc_requests(sc)) != 0)) { 521 if (attaching ) { 522 mps_dprint(sc, MPS_FAULT, "%s failed to alloc " 523 "queues with error %d\n", __func__, error); 524 mps_free(sc); 525 return (error); 526 } else { 527 panic("%s failed to alloc queues with error " 528 "%d\n", __func__, error); 529 } 530 } 531 } 532 533 /* Always initialize the queues */ 534 bzero(sc->free_queue, sc->fqdepth * 4); 535 mps_init_queues(sc); 536 537 /* 538 * Always get the chip out of the reset state, but only panic if not 539 * attaching. If attaching and there is an error, that is handled by 540 * the OS. 541 */ 542 error = mps_transition_operational(sc); 543 if (error != 0) { 544 if (attaching) { 545 mps_printf(sc, "%s failed to transition to operational " 546 "with error %d\n", __func__, error); 547 mps_free(sc); 548 return (error); 549 } else { 550 panic("%s failed to transition to operational with " 551 "error %d\n", __func__, error); 552 } 553 } 554 555 /* 556 * Finish the queue initialization. 557 * These are set here instead of in mps_init_queues() because the 558 * IOC resets these values during the state transition in 559 * mps_transition_operational(). The free index is set to 1 560 * because the corresponding index in the IOC is set to 0, and the 561 * IOC treats the queues as full if both are set to the same value. 562 * Hence the reason that the queue can't hold all of the possible 563 * replies. 564 */ 565 sc->replypostindex = 0; 566 mps_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex); 567 mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 0); 568 569 /* 570 * Attach the subsystems so they can prepare their event masks. 571 */ 572 /* XXX Should be dynamic so that IM/IR and user modules can attach */ 573 if (attaching) { 574 if (((error = mps_attach_log(sc)) != 0) || 575 ((error = mps_attach_sas(sc)) != 0) || 576 ((error = mps_attach_user(sc)) != 0)) { 577 mps_printf(sc, "%s failed to attach all subsystems: " 578 "error %d\n", __func__, error); 579 mps_free(sc); 580 return (error); 581 } 582 583 if ((error = mps_pci_setup_interrupts(sc)) != 0) { 584 mps_printf(sc, "%s failed to setup interrupts\n", 585 __func__); 586 mps_free(sc); 587 return (error); 588 } 589 } 590 591 /* 592 * Set flag if this is a WD controller. This shouldn't ever change, but 593 * reset it after a Diag Reset, just in case. 594 */ 595 sc->WD_available = FALSE; 596 if (pci_get_device(sc->mps_dev) == MPI2_MFGPAGE_DEVID_SSS6200) 597 sc->WD_available = TRUE; 598 599 return (error); 600 } 601 602 /* 603 * This is called if memory is being free (during detach for example) and when 604 * buffers need to be reallocated due to a Diag Reset. 605 */ 606 static void 607 mps_iocfacts_free(struct mps_softc *sc) 608 { 609 struct mps_command *cm; 610 int i; 611 612 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 613 614 if (sc->free_busaddr != 0) 615 bus_dmamap_unload(sc->queues_dmat, sc->queues_map); 616 if (sc->free_queue != NULL) 617 bus_dmamem_free(sc->queues_dmat, sc->free_queue, 618 sc->queues_map); 619 if (sc->queues_dmat != NULL) 620 bus_dma_tag_destroy(sc->queues_dmat); 621 622 if (sc->chain_busaddr != 0) 623 bus_dmamap_unload(sc->chain_dmat, sc->chain_map); 624 if (sc->chain_frames != NULL) 625 bus_dmamem_free(sc->chain_dmat, sc->chain_frames, 626 sc->chain_map); 627 if (sc->chain_dmat != NULL) 628 bus_dma_tag_destroy(sc->chain_dmat); 629 630 if (sc->sense_busaddr != 0) 631 bus_dmamap_unload(sc->sense_dmat, sc->sense_map); 632 if (sc->sense_frames != NULL) 633 bus_dmamem_free(sc->sense_dmat, sc->sense_frames, 634 sc->sense_map); 635 if (sc->sense_dmat != NULL) 636 bus_dma_tag_destroy(sc->sense_dmat); 637 638 if (sc->reply_busaddr != 0) 639 bus_dmamap_unload(sc->reply_dmat, sc->reply_map); 640 if (sc->reply_frames != NULL) 641 bus_dmamem_free(sc->reply_dmat, sc->reply_frames, 642 sc->reply_map); 643 if (sc->reply_dmat != NULL) 644 bus_dma_tag_destroy(sc->reply_dmat); 645 646 if (sc->req_busaddr != 0) 647 bus_dmamap_unload(sc->req_dmat, sc->req_map); 648 if (sc->req_frames != NULL) 649 bus_dmamem_free(sc->req_dmat, sc->req_frames, sc->req_map); 650 if (sc->req_dmat != NULL) 651 bus_dma_tag_destroy(sc->req_dmat); 652 653 if (sc->chains != NULL) 654 free(sc->chains, M_MPT2); 655 if (sc->commands != NULL) { 656 for (i = 1; i < sc->num_reqs; i++) { 657 cm = &sc->commands[i]; 658 bus_dmamap_destroy(sc->buffer_dmat, cm->cm_dmamap); 659 } 660 free(sc->commands, M_MPT2); 661 } 662 if (sc->buffer_dmat != NULL) 663 bus_dma_tag_destroy(sc->buffer_dmat); 664 } 665 666 /* 667 * The terms diag reset and hard reset are used interchangeably in the MPI 668 * docs to mean resetting the controller chip. In this code diag reset 669 * cleans everything up, and the hard reset function just sends the reset 670 * sequence to the chip. This should probably be refactored so that every 671 * subsystem gets a reset notification of some sort, and can clean up 672 * appropriately. 673 */ 674 int 675 mps_reinit(struct mps_softc *sc) 676 { 677 int error; 678 struct mpssas_softc *sassc; 679 680 sassc = sc->sassc; 681 682 MPS_FUNCTRACE(sc); 683 684 mtx_assert(&sc->mps_mtx, MA_OWNED); 685 686 if (sc->mps_flags & MPS_FLAGS_DIAGRESET) { 687 mps_dprint(sc, MPS_INIT, "%s reset already in progress\n", 688 __func__); 689 return 0; 690 } 691 692 mps_dprint(sc, MPS_INFO, "Reinitializing controller,\n"); 693 /* make sure the completion callbacks can recognize they're getting 694 * a NULL cm_reply due to a reset. 695 */ 696 sc->mps_flags |= MPS_FLAGS_DIAGRESET; 697 698 /* 699 * Mask interrupts here. 700 */ 701 mps_dprint(sc, MPS_INIT, "%s mask interrupts\n", __func__); 702 mps_mask_intr(sc); 703 704 error = mps_diag_reset(sc, CAN_SLEEP); 705 if (error != 0) { 706 /* XXXSL No need to panic here */ 707 panic("%s hard reset failed with error %d\n", 708 __func__, error); 709 } 710 711 /* Restore the PCI state, including the MSI-X registers */ 712 mps_pci_restore(sc); 713 714 /* Give the I/O subsystem special priority to get itself prepared */ 715 mpssas_handle_reinit(sc); 716 717 /* 718 * Get IOC Facts and allocate all structures based on this information. 719 * The attach function will also call mps_iocfacts_allocate at startup. 720 * If relevant values have changed in IOC Facts, this function will free 721 * all of the memory based on IOC Facts and reallocate that memory. 722 */ 723 if ((error = mps_iocfacts_allocate(sc, FALSE)) != 0) { 724 panic("%s IOC Facts based allocation failed with error %d\n", 725 __func__, error); 726 } 727 728 /* 729 * Mapping structures will be re-allocated after getting IOC Page8, so 730 * free these structures here. 731 */ 732 mps_mapping_exit(sc); 733 734 /* 735 * The static page function currently read is IOC Page8. Others can be 736 * added in future. It's possible that the values in IOC Page8 have 737 * changed after a Diag Reset due to user modification, so always read 738 * these. Interrupts are masked, so unmask them before getting config 739 * pages. 740 */ 741 mps_unmask_intr(sc); 742 sc->mps_flags &= ~MPS_FLAGS_DIAGRESET; 743 mps_base_static_config_pages(sc); 744 745 /* 746 * Some mapping info is based in IOC Page8 data, so re-initialize the 747 * mapping tables. 748 */ 749 mps_mapping_initialize(sc); 750 751 /* 752 * Restart will reload the event masks clobbered by the reset, and 753 * then enable the port. 754 */ 755 mps_reregister_events(sc); 756 757 /* the end of discovery will release the simq, so we're done. */ 758 mps_dprint(sc, MPS_INFO, "%s finished sc %p post %u free %u\n", 759 __func__, sc, sc->replypostindex, sc->replyfreeindex); 760 761 mpssas_release_simq_reinit(sassc); 762 763 return 0; 764 } 765 766 /* Wait for the chip to ACK a word that we've put into its FIFO 767 * Wait for <timeout> seconds. In single loop wait for busy loop 768 * for 500 microseconds. 769 * Total is [ 0.5 * (2000 * <timeout>) ] in miliseconds. 770 * */ 771 static int 772 mps_wait_db_ack(struct mps_softc *sc, int timeout, int sleep_flag) 773 { 774 775 u32 cntdn, count; 776 u32 int_status; 777 u32 doorbell; 778 779 count = 0; 780 cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; 781 do { 782 int_status = mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); 783 if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { 784 mps_dprint(sc, MPS_INIT, 785 "%s: successfull count(%d), timeout(%d)\n", 786 __func__, count, timeout); 787 return 0; 788 } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { 789 doorbell = mps_regread(sc, MPI2_DOORBELL_OFFSET); 790 if ((doorbell & MPI2_IOC_STATE_MASK) == 791 MPI2_IOC_STATE_FAULT) { 792 mps_dprint(sc, MPS_FAULT, 793 "fault_state(0x%04x)!\n", doorbell); 794 return (EFAULT); 795 } 796 } else if (int_status == 0xFFFFFFFF) 797 goto out; 798 799 /* If it can sleep, sleep for 1 milisecond, else busy loop for 800 * 0.5 milisecond */ 801 if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) 802 msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, 803 "mpsdba", hz/1000); 804 else if (sleep_flag == CAN_SLEEP) 805 pause("mpsdba", hz/1000); 806 else 807 DELAY(500); 808 count++; 809 } while (--cntdn); 810 811 out: 812 mps_dprint(sc, MPS_FAULT, "%s: failed due to timeout count(%d), " 813 "int_status(%x)!\n", __func__, count, int_status); 814 return (ETIMEDOUT); 815 816 } 817 818 /* Wait for the chip to signal that the next word in its FIFO can be fetched */ 819 static int 820 mps_wait_db_int(struct mps_softc *sc) 821 { 822 int retry; 823 824 for (retry = 0; retry < MPS_DB_MAX_WAIT; retry++) { 825 if ((mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) & 826 MPI2_HIS_IOC2SYS_DB_STATUS) != 0) 827 return (0); 828 DELAY(2000); 829 } 830 return (ETIMEDOUT); 831 } 832 833 /* Step through the synchronous command state machine, i.e. "Doorbell mode" */ 834 static int 835 mps_request_sync(struct mps_softc *sc, void *req, MPI2_DEFAULT_REPLY *reply, 836 int req_sz, int reply_sz, int timeout) 837 { 838 uint32_t *data32; 839 uint16_t *data16; 840 int i, count, ioc_sz, residual; 841 int sleep_flags = CAN_SLEEP; 842 843 if (curthread->td_no_sleeping != 0) 844 sleep_flags = NO_SLEEP; 845 846 /* Step 1 */ 847 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 848 849 /* Step 2 */ 850 if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) 851 return (EBUSY); 852 853 /* Step 3 854 * Announce that a message is coming through the doorbell. Messages 855 * are pushed at 32bit words, so round up if needed. 856 */ 857 count = (req_sz + 3) / 4; 858 mps_regwrite(sc, MPI2_DOORBELL_OFFSET, 859 (MPI2_FUNCTION_HANDSHAKE << MPI2_DOORBELL_FUNCTION_SHIFT) | 860 (count << MPI2_DOORBELL_ADD_DWORDS_SHIFT)); 861 862 /* Step 4 */ 863 if (mps_wait_db_int(sc) || 864 (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) == 0) { 865 mps_dprint(sc, MPS_FAULT, "Doorbell failed to activate\n"); 866 return (ENXIO); 867 } 868 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 869 if (mps_wait_db_ack(sc, 5, sleep_flags) != 0) { 870 mps_dprint(sc, MPS_FAULT, "Doorbell handshake failed\n"); 871 return (ENXIO); 872 } 873 874 /* Step 5 */ 875 /* Clock out the message data synchronously in 32-bit dwords*/ 876 data32 = (uint32_t *)req; 877 for (i = 0; i < count; i++) { 878 mps_regwrite(sc, MPI2_DOORBELL_OFFSET, htole32(data32[i])); 879 if (mps_wait_db_ack(sc, 5, sleep_flags) != 0) { 880 mps_dprint(sc, MPS_FAULT, 881 "Timeout while writing doorbell\n"); 882 return (ENXIO); 883 } 884 } 885 886 /* Step 6 */ 887 /* Clock in the reply in 16-bit words. The total length of the 888 * message is always in the 4th byte, so clock out the first 2 words 889 * manually, then loop the rest. 890 */ 891 data16 = (uint16_t *)reply; 892 if (mps_wait_db_int(sc) != 0) { 893 mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 0\n"); 894 return (ENXIO); 895 } 896 data16[0] = 897 mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; 898 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 899 if (mps_wait_db_int(sc) != 0) { 900 mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 1\n"); 901 return (ENXIO); 902 } 903 data16[1] = 904 mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; 905 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 906 907 /* Number of 32bit words in the message */ 908 ioc_sz = reply->MsgLength; 909 910 /* 911 * Figure out how many 16bit words to clock in without overrunning. 912 * The precision loss with dividing reply_sz can safely be 913 * ignored because the messages can only be multiples of 32bits. 914 */ 915 residual = 0; 916 count = MIN((reply_sz / 4), ioc_sz) * 2; 917 if (count < ioc_sz * 2) { 918 residual = ioc_sz * 2 - count; 919 mps_dprint(sc, MPS_ERROR, "Driver error, throwing away %d " 920 "residual message words\n", residual); 921 } 922 923 for (i = 2; i < count; i++) { 924 if (mps_wait_db_int(sc) != 0) { 925 mps_dprint(sc, MPS_FAULT, 926 "Timeout reading doorbell %d\n", i); 927 return (ENXIO); 928 } 929 data16[i] = mps_regread(sc, MPI2_DOORBELL_OFFSET) & 930 MPI2_DOORBELL_DATA_MASK; 931 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 932 } 933 934 /* 935 * Pull out residual words that won't fit into the provided buffer. 936 * This keeps the chip from hanging due to a driver programming 937 * error. 938 */ 939 while (residual--) { 940 if (mps_wait_db_int(sc) != 0) { 941 mps_dprint(sc, MPS_FAULT, 942 "Timeout reading doorbell\n"); 943 return (ENXIO); 944 } 945 (void)mps_regread(sc, MPI2_DOORBELL_OFFSET); 946 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 947 } 948 949 /* Step 7 */ 950 if (mps_wait_db_int(sc) != 0) { 951 mps_dprint(sc, MPS_FAULT, "Timeout waiting to exit doorbell\n"); 952 return (ENXIO); 953 } 954 if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) 955 mps_dprint(sc, MPS_FAULT, "Warning, doorbell still active\n"); 956 mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); 957 958 return (0); 959 } 960 961 static void 962 mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm) 963 { 964 reply_descriptor rd; 965 MPS_FUNCTRACE(sc); 966 mps_dprint(sc, MPS_TRACE, "SMID %u cm %p ccb %p\n", 967 cm->cm_desc.Default.SMID, cm, cm->cm_ccb); 968 969 if (sc->mps_flags & MPS_FLAGS_ATTACH_DONE && !(sc->mps_flags & MPS_FLAGS_SHUTDOWN)) 970 mtx_assert(&sc->mps_mtx, MA_OWNED); 971 972 if (++sc->io_cmds_active > sc->io_cmds_highwater) 973 sc->io_cmds_highwater++; 974 rd.u.low = cm->cm_desc.Words.Low; 975 rd.u.high = cm->cm_desc.Words.High; 976 rd.word = htole64(rd.word); 977 /* TODO-We may need to make below regwrite atomic */ 978 mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET, 979 rd.u.low); 980 mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET, 981 rd.u.high); 982 } 983 984 /* 985 * Just the FACTS, ma'am. 986 */ 987 static int 988 mps_get_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts) 989 { 990 MPI2_DEFAULT_REPLY *reply; 991 MPI2_IOC_FACTS_REQUEST request; 992 int error, req_sz, reply_sz; 993 994 MPS_FUNCTRACE(sc); 995 996 req_sz = sizeof(MPI2_IOC_FACTS_REQUEST); 997 reply_sz = sizeof(MPI2_IOC_FACTS_REPLY); 998 reply = (MPI2_DEFAULT_REPLY *)facts; 999 1000 bzero(&request, req_sz); 1001 request.Function = MPI2_FUNCTION_IOC_FACTS; 1002 error = mps_request_sync(sc, &request, reply, req_sz, reply_sz, 5); 1003 1004 return (error); 1005 } 1006 1007 static int 1008 mps_send_iocinit(struct mps_softc *sc) 1009 { 1010 MPI2_IOC_INIT_REQUEST init; 1011 MPI2_DEFAULT_REPLY reply; 1012 int req_sz, reply_sz, error; 1013 struct timeval now; 1014 uint64_t time_in_msec; 1015 1016 MPS_FUNCTRACE(sc); 1017 1018 req_sz = sizeof(MPI2_IOC_INIT_REQUEST); 1019 reply_sz = sizeof(MPI2_IOC_INIT_REPLY); 1020 bzero(&init, req_sz); 1021 bzero(&reply, reply_sz); 1022 1023 /* 1024 * Fill in the init block. Note that most addresses are 1025 * deliberately in the lower 32bits of memory. This is a micro- 1026 * optimzation for PCI/PCIX, though it's not clear if it helps PCIe. 1027 */ 1028 init.Function = MPI2_FUNCTION_IOC_INIT; 1029 init.WhoInit = MPI2_WHOINIT_HOST_DRIVER; 1030 init.MsgVersion = htole16(MPI2_VERSION); 1031 init.HeaderVersion = htole16(MPI2_HEADER_VERSION); 1032 init.SystemRequestFrameSize = htole16(sc->facts->IOCRequestFrameSize); 1033 init.ReplyDescriptorPostQueueDepth = htole16(sc->pqdepth); 1034 init.ReplyFreeQueueDepth = htole16(sc->fqdepth); 1035 init.SenseBufferAddressHigh = 0; 1036 init.SystemReplyAddressHigh = 0; 1037 init.SystemRequestFrameBaseAddress.High = 0; 1038 init.SystemRequestFrameBaseAddress.Low = htole32((uint32_t)sc->req_busaddr); 1039 init.ReplyDescriptorPostQueueAddress.High = 0; 1040 init.ReplyDescriptorPostQueueAddress.Low = htole32((uint32_t)sc->post_busaddr); 1041 init.ReplyFreeQueueAddress.High = 0; 1042 init.ReplyFreeQueueAddress.Low = htole32((uint32_t)sc->free_busaddr); 1043 getmicrotime(&now); 1044 time_in_msec = (now.tv_sec * 1000 + now.tv_usec/1000); 1045 init.TimeStamp.High = htole32((time_in_msec >> 32) & 0xFFFFFFFF); 1046 init.TimeStamp.Low = htole32(time_in_msec & 0xFFFFFFFF); 1047 1048 error = mps_request_sync(sc, &init, &reply, req_sz, reply_sz, 5); 1049 if ((reply.IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) 1050 error = ENXIO; 1051 1052 mps_dprint(sc, MPS_INIT, "IOCInit status= 0x%x\n", reply.IOCStatus); 1053 return (error); 1054 } 1055 1056 void 1057 mps_memaddr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1058 { 1059 bus_addr_t *addr; 1060 1061 addr = arg; 1062 *addr = segs[0].ds_addr; 1063 } 1064 1065 static int 1066 mps_alloc_queues(struct mps_softc *sc) 1067 { 1068 bus_addr_t queues_busaddr; 1069 uint8_t *queues; 1070 int qsize, fqsize, pqsize; 1071 1072 /* 1073 * The reply free queue contains 4 byte entries in multiples of 16 and 1074 * aligned on a 16 byte boundary. There must always be an unused entry. 1075 * This queue supplies fresh reply frames for the firmware to use. 1076 * 1077 * The reply descriptor post queue contains 8 byte entries in 1078 * multiples of 16 and aligned on a 16 byte boundary. This queue 1079 * contains filled-in reply frames sent from the firmware to the host. 1080 * 1081 * These two queues are allocated together for simplicity. 1082 */ 1083 sc->fqdepth = roundup2((sc->num_replies + 1), 16); 1084 sc->pqdepth = roundup2((sc->num_replies + 1), 16); 1085 fqsize= sc->fqdepth * 4; 1086 pqsize = sc->pqdepth * 8; 1087 qsize = fqsize + pqsize; 1088 1089 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1090 16, 0, /* algnmnt, boundary */ 1091 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1092 BUS_SPACE_MAXADDR, /* highaddr */ 1093 NULL, NULL, /* filter, filterarg */ 1094 qsize, /* maxsize */ 1095 1, /* nsegments */ 1096 qsize, /* maxsegsize */ 1097 0, /* flags */ 1098 NULL, NULL, /* lockfunc, lockarg */ 1099 &sc->queues_dmat)) { 1100 device_printf(sc->mps_dev, "Cannot allocate queues DMA tag\n"); 1101 return (ENOMEM); 1102 } 1103 if (bus_dmamem_alloc(sc->queues_dmat, (void **)&queues, BUS_DMA_NOWAIT, 1104 &sc->queues_map)) { 1105 device_printf(sc->mps_dev, "Cannot allocate queues memory\n"); 1106 return (ENOMEM); 1107 } 1108 bzero(queues, qsize); 1109 bus_dmamap_load(sc->queues_dmat, sc->queues_map, queues, qsize, 1110 mps_memaddr_cb, &queues_busaddr, 0); 1111 1112 sc->free_queue = (uint32_t *)queues; 1113 sc->free_busaddr = queues_busaddr; 1114 sc->post_queue = (MPI2_REPLY_DESCRIPTORS_UNION *)(queues + fqsize); 1115 sc->post_busaddr = queues_busaddr + fqsize; 1116 1117 return (0); 1118 } 1119 1120 static int 1121 mps_alloc_replies(struct mps_softc *sc) 1122 { 1123 int rsize, num_replies; 1124 1125 /* 1126 * sc->num_replies should be one less than sc->fqdepth. We need to 1127 * allocate space for sc->fqdepth replies, but only sc->num_replies 1128 * replies can be used at once. 1129 */ 1130 num_replies = max(sc->fqdepth, sc->num_replies); 1131 1132 rsize = sc->facts->ReplyFrameSize * num_replies * 4; 1133 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1134 4, 0, /* algnmnt, boundary */ 1135 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1136 BUS_SPACE_MAXADDR, /* highaddr */ 1137 NULL, NULL, /* filter, filterarg */ 1138 rsize, /* maxsize */ 1139 1, /* nsegments */ 1140 rsize, /* maxsegsize */ 1141 0, /* flags */ 1142 NULL, NULL, /* lockfunc, lockarg */ 1143 &sc->reply_dmat)) { 1144 device_printf(sc->mps_dev, "Cannot allocate replies DMA tag\n"); 1145 return (ENOMEM); 1146 } 1147 if (bus_dmamem_alloc(sc->reply_dmat, (void **)&sc->reply_frames, 1148 BUS_DMA_NOWAIT, &sc->reply_map)) { 1149 device_printf(sc->mps_dev, "Cannot allocate replies memory\n"); 1150 return (ENOMEM); 1151 } 1152 bzero(sc->reply_frames, rsize); 1153 bus_dmamap_load(sc->reply_dmat, sc->reply_map, sc->reply_frames, rsize, 1154 mps_memaddr_cb, &sc->reply_busaddr, 0); 1155 1156 return (0); 1157 } 1158 1159 static int 1160 mps_alloc_requests(struct mps_softc *sc) 1161 { 1162 struct mps_command *cm; 1163 struct mps_chain *chain; 1164 int i, rsize, nsegs; 1165 1166 rsize = sc->facts->IOCRequestFrameSize * sc->num_reqs * 4; 1167 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1168 16, 0, /* algnmnt, boundary */ 1169 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1170 BUS_SPACE_MAXADDR, /* highaddr */ 1171 NULL, NULL, /* filter, filterarg */ 1172 rsize, /* maxsize */ 1173 1, /* nsegments */ 1174 rsize, /* maxsegsize */ 1175 0, /* flags */ 1176 NULL, NULL, /* lockfunc, lockarg */ 1177 &sc->req_dmat)) { 1178 device_printf(sc->mps_dev, "Cannot allocate request DMA tag\n"); 1179 return (ENOMEM); 1180 } 1181 if (bus_dmamem_alloc(sc->req_dmat, (void **)&sc->req_frames, 1182 BUS_DMA_NOWAIT, &sc->req_map)) { 1183 device_printf(sc->mps_dev, "Cannot allocate request memory\n"); 1184 return (ENOMEM); 1185 } 1186 bzero(sc->req_frames, rsize); 1187 bus_dmamap_load(sc->req_dmat, sc->req_map, sc->req_frames, rsize, 1188 mps_memaddr_cb, &sc->req_busaddr, 0); 1189 1190 rsize = sc->facts->IOCRequestFrameSize * sc->max_chains * 4; 1191 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1192 16, 0, /* algnmnt, boundary */ 1193 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1194 BUS_SPACE_MAXADDR, /* highaddr */ 1195 NULL, NULL, /* filter, filterarg */ 1196 rsize, /* maxsize */ 1197 1, /* nsegments */ 1198 rsize, /* maxsegsize */ 1199 0, /* flags */ 1200 NULL, NULL, /* lockfunc, lockarg */ 1201 &sc->chain_dmat)) { 1202 device_printf(sc->mps_dev, "Cannot allocate chain DMA tag\n"); 1203 return (ENOMEM); 1204 } 1205 if (bus_dmamem_alloc(sc->chain_dmat, (void **)&sc->chain_frames, 1206 BUS_DMA_NOWAIT, &sc->chain_map)) { 1207 device_printf(sc->mps_dev, "Cannot allocate chain memory\n"); 1208 return (ENOMEM); 1209 } 1210 bzero(sc->chain_frames, rsize); 1211 bus_dmamap_load(sc->chain_dmat, sc->chain_map, sc->chain_frames, rsize, 1212 mps_memaddr_cb, &sc->chain_busaddr, 0); 1213 1214 rsize = MPS_SENSE_LEN * sc->num_reqs; 1215 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1216 1, 0, /* algnmnt, boundary */ 1217 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ 1218 BUS_SPACE_MAXADDR, /* highaddr */ 1219 NULL, NULL, /* filter, filterarg */ 1220 rsize, /* maxsize */ 1221 1, /* nsegments */ 1222 rsize, /* maxsegsize */ 1223 0, /* flags */ 1224 NULL, NULL, /* lockfunc, lockarg */ 1225 &sc->sense_dmat)) { 1226 device_printf(sc->mps_dev, "Cannot allocate sense DMA tag\n"); 1227 return (ENOMEM); 1228 } 1229 if (bus_dmamem_alloc(sc->sense_dmat, (void **)&sc->sense_frames, 1230 BUS_DMA_NOWAIT, &sc->sense_map)) { 1231 device_printf(sc->mps_dev, "Cannot allocate sense memory\n"); 1232 return (ENOMEM); 1233 } 1234 bzero(sc->sense_frames, rsize); 1235 bus_dmamap_load(sc->sense_dmat, sc->sense_map, sc->sense_frames, rsize, 1236 mps_memaddr_cb, &sc->sense_busaddr, 0); 1237 1238 sc->chains = malloc(sizeof(struct mps_chain) * sc->max_chains, M_MPT2, 1239 M_WAITOK | M_ZERO); 1240 if(!sc->chains) { 1241 device_printf(sc->mps_dev, 1242 "Cannot allocate chains memory %s %d\n", 1243 __func__, __LINE__); 1244 return (ENOMEM); 1245 } 1246 for (i = 0; i < sc->max_chains; i++) { 1247 chain = &sc->chains[i]; 1248 chain->chain = (MPI2_SGE_IO_UNION *)(sc->chain_frames + 1249 i * sc->facts->IOCRequestFrameSize * 4); 1250 chain->chain_busaddr = sc->chain_busaddr + 1251 i * sc->facts->IOCRequestFrameSize * 4; 1252 mps_free_chain(sc, chain); 1253 sc->chain_free_lowwater++; 1254 } 1255 1256 /* XXX Need to pick a more precise value */ 1257 nsegs = (MAXPHYS / PAGE_SIZE) + 1; 1258 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1259 1, 0, /* algnmnt, boundary */ 1260 BUS_SPACE_MAXADDR, /* lowaddr */ 1261 BUS_SPACE_MAXADDR, /* highaddr */ 1262 NULL, NULL, /* filter, filterarg */ 1263 BUS_SPACE_MAXSIZE_32BIT,/* maxsize */ 1264 nsegs, /* nsegments */ 1265 BUS_SPACE_MAXSIZE_24BIT,/* maxsegsize */ 1266 BUS_DMA_ALLOCNOW, /* flags */ 1267 busdma_lock_mutex, /* lockfunc */ 1268 &sc->mps_mtx, /* lockarg */ 1269 &sc->buffer_dmat)) { 1270 device_printf(sc->mps_dev, "Cannot allocate buffer DMA tag\n"); 1271 return (ENOMEM); 1272 } 1273 1274 /* 1275 * SMID 0 cannot be used as a free command per the firmware spec. 1276 * Just drop that command instead of risking accounting bugs. 1277 */ 1278 sc->commands = malloc(sizeof(struct mps_command) * sc->num_reqs, 1279 M_MPT2, M_WAITOK | M_ZERO); 1280 if(!sc->commands) { 1281 device_printf(sc->mps_dev, "Cannot allocate memory %s %d\n", 1282 __func__, __LINE__); 1283 return (ENOMEM); 1284 } 1285 for (i = 1; i < sc->num_reqs; i++) { 1286 cm = &sc->commands[i]; 1287 cm->cm_req = sc->req_frames + 1288 i * sc->facts->IOCRequestFrameSize * 4; 1289 cm->cm_req_busaddr = sc->req_busaddr + 1290 i * sc->facts->IOCRequestFrameSize * 4; 1291 cm->cm_sense = &sc->sense_frames[i]; 1292 cm->cm_sense_busaddr = sc->sense_busaddr + i * MPS_SENSE_LEN; 1293 cm->cm_desc.Default.SMID = i; 1294 cm->cm_sc = sc; 1295 TAILQ_INIT(&cm->cm_chain_list); 1296 callout_init_mtx(&cm->cm_callout, &sc->mps_mtx, 0); 1297 1298 /* XXX Is a failure here a critical problem? */ 1299 if (bus_dmamap_create(sc->buffer_dmat, 0, &cm->cm_dmamap) == 0) 1300 if (i <= sc->facts->HighPriorityCredit) 1301 mps_free_high_priority_command(sc, cm); 1302 else 1303 mps_free_command(sc, cm); 1304 else { 1305 panic("failed to allocate command %d\n", i); 1306 sc->num_reqs = i; 1307 break; 1308 } 1309 } 1310 1311 return (0); 1312 } 1313 1314 static int 1315 mps_init_queues(struct mps_softc *sc) 1316 { 1317 int i; 1318 1319 memset((uint8_t *)sc->post_queue, 0xff, sc->pqdepth * 8); 1320 1321 /* 1322 * According to the spec, we need to use one less reply than we 1323 * have space for on the queue. So sc->num_replies (the number we 1324 * use) should be less than sc->fqdepth (allocated size). 1325 */ 1326 if (sc->num_replies >= sc->fqdepth) 1327 return (EINVAL); 1328 1329 /* 1330 * Initialize all of the free queue entries. 1331 */ 1332 for (i = 0; i < sc->fqdepth; i++) 1333 sc->free_queue[i] = sc->reply_busaddr + (i * sc->facts->ReplyFrameSize * 4); 1334 sc->replyfreeindex = sc->num_replies; 1335 1336 return (0); 1337 } 1338 1339 /* Get the driver parameter tunables. Lowest priority are the driver defaults. 1340 * Next are the global settings, if they exist. Highest are the per-unit 1341 * settings, if they exist. 1342 */ 1343 static void 1344 mps_get_tunables(struct mps_softc *sc) 1345 { 1346 char tmpstr[80]; 1347 1348 /* XXX default to some debugging for now */ 1349 sc->mps_debug = MPS_INFO|MPS_FAULT; 1350 sc->disable_msix = 0; 1351 sc->disable_msi = 0; 1352 sc->max_chains = MPS_CHAIN_FRAMES; 1353 sc->enable_ssu = MPS_SSU_ENABLE_SSD_DISABLE_HDD; 1354 sc->spinup_wait_time = DEFAULT_SPINUP_WAIT; 1355 1356 /* 1357 * Grab the global variables. 1358 */ 1359 TUNABLE_INT_FETCH("hw.mps.debug_level", &sc->mps_debug); 1360 TUNABLE_INT_FETCH("hw.mps.disable_msix", &sc->disable_msix); 1361 TUNABLE_INT_FETCH("hw.mps.disable_msi", &sc->disable_msi); 1362 TUNABLE_INT_FETCH("hw.mps.max_chains", &sc->max_chains); 1363 TUNABLE_INT_FETCH("hw.mps.enable_ssu", &sc->enable_ssu); 1364 TUNABLE_INT_FETCH("hw.mps.spinup_wait_time", &sc->spinup_wait_time); 1365 1366 /* Grab the unit-instance variables */ 1367 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.debug_level", 1368 device_get_unit(sc->mps_dev)); 1369 TUNABLE_INT_FETCH(tmpstr, &sc->mps_debug); 1370 1371 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.disable_msix", 1372 device_get_unit(sc->mps_dev)); 1373 TUNABLE_INT_FETCH(tmpstr, &sc->disable_msix); 1374 1375 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.disable_msi", 1376 device_get_unit(sc->mps_dev)); 1377 TUNABLE_INT_FETCH(tmpstr, &sc->disable_msi); 1378 1379 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.max_chains", 1380 device_get_unit(sc->mps_dev)); 1381 TUNABLE_INT_FETCH(tmpstr, &sc->max_chains); 1382 1383 bzero(sc->exclude_ids, sizeof(sc->exclude_ids)); 1384 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.exclude_ids", 1385 device_get_unit(sc->mps_dev)); 1386 TUNABLE_STR_FETCH(tmpstr, sc->exclude_ids, sizeof(sc->exclude_ids)); 1387 1388 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.enable_ssu", 1389 device_get_unit(sc->mps_dev)); 1390 TUNABLE_INT_FETCH(tmpstr, &sc->enable_ssu); 1391 1392 snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.spinup_wait_time", 1393 device_get_unit(sc->mps_dev)); 1394 TUNABLE_INT_FETCH(tmpstr, &sc->spinup_wait_time); 1395 } 1396 1397 static void 1398 mps_setup_sysctl(struct mps_softc *sc) 1399 { 1400 struct sysctl_ctx_list *sysctl_ctx = NULL; 1401 struct sysctl_oid *sysctl_tree = NULL; 1402 char tmpstr[80], tmpstr2[80]; 1403 1404 /* 1405 * Setup the sysctl variable so the user can change the debug level 1406 * on the fly. 1407 */ 1408 snprintf(tmpstr, sizeof(tmpstr), "MPS controller %d", 1409 device_get_unit(sc->mps_dev)); 1410 snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mps_dev)); 1411 1412 sysctl_ctx = device_get_sysctl_ctx(sc->mps_dev); 1413 if (sysctl_ctx != NULL) 1414 sysctl_tree = device_get_sysctl_tree(sc->mps_dev); 1415 1416 if (sysctl_tree == NULL) { 1417 sysctl_ctx_init(&sc->sysctl_ctx); 1418 sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, 1419 SYSCTL_STATIC_CHILDREN(_hw_mps), OID_AUTO, tmpstr2, 1420 CTLFLAG_RD, 0, tmpstr); 1421 if (sc->sysctl_tree == NULL) 1422 return; 1423 sysctl_ctx = &sc->sysctl_ctx; 1424 sysctl_tree = sc->sysctl_tree; 1425 } 1426 1427 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1428 OID_AUTO, "debug_level", CTLFLAG_RW, &sc->mps_debug, 0, 1429 "mps debug level"); 1430 1431 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1432 OID_AUTO, "disable_msix", CTLFLAG_RD, &sc->disable_msix, 0, 1433 "Disable the use of MSI-X interrupts"); 1434 1435 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1436 OID_AUTO, "disable_msi", CTLFLAG_RD, &sc->disable_msi, 0, 1437 "Disable the use of MSI interrupts"); 1438 1439 SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1440 OID_AUTO, "firmware_version", CTLFLAG_RW, sc->fw_version, 1441 strlen(sc->fw_version), "firmware version"); 1442 1443 SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1444 OID_AUTO, "driver_version", CTLFLAG_RW, MPS_DRIVER_VERSION, 1445 strlen(MPS_DRIVER_VERSION), "driver version"); 1446 1447 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1448 OID_AUTO, "io_cmds_active", CTLFLAG_RD, 1449 &sc->io_cmds_active, 0, "number of currently active commands"); 1450 1451 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1452 OID_AUTO, "io_cmds_highwater", CTLFLAG_RD, 1453 &sc->io_cmds_highwater, 0, "maximum active commands seen"); 1454 1455 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1456 OID_AUTO, "chain_free", CTLFLAG_RD, 1457 &sc->chain_free, 0, "number of free chain elements"); 1458 1459 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1460 OID_AUTO, "chain_free_lowwater", CTLFLAG_RD, 1461 &sc->chain_free_lowwater, 0,"lowest number of free chain elements"); 1462 1463 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1464 OID_AUTO, "max_chains", CTLFLAG_RD, 1465 &sc->max_chains, 0,"maximum chain frames that will be allocated"); 1466 1467 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1468 OID_AUTO, "enable_ssu", CTLFLAG_RW, &sc->enable_ssu, 0, 1469 "enable SSU to SATA SSD/HDD at shutdown"); 1470 1471 SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1472 OID_AUTO, "chain_alloc_fail", CTLFLAG_RD, 1473 &sc->chain_alloc_fail, "chain allocation failures"); 1474 1475 SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1476 OID_AUTO, "spinup_wait_time", CTLFLAG_RD, 1477 &sc->spinup_wait_time, DEFAULT_SPINUP_WAIT, "seconds to wait for " 1478 "spinup after SATA ID error"); 1479 } 1480 1481 int 1482 mps_attach(struct mps_softc *sc) 1483 { 1484 int error; 1485 1486 mps_get_tunables(sc); 1487 1488 MPS_FUNCTRACE(sc); 1489 1490 mtx_init(&sc->mps_mtx, "MPT2SAS lock", NULL, MTX_DEF); 1491 callout_init_mtx(&sc->periodic, &sc->mps_mtx, 0); 1492 TAILQ_INIT(&sc->event_list); 1493 timevalclear(&sc->lastfail); 1494 1495 if ((error = mps_transition_ready(sc)) != 0) { 1496 mps_printf(sc, "%s failed to transition ready\n", __func__); 1497 return (error); 1498 } 1499 1500 sc->facts = malloc(sizeof(MPI2_IOC_FACTS_REPLY), M_MPT2, 1501 M_ZERO|M_NOWAIT); 1502 if(!sc->facts) { 1503 device_printf(sc->mps_dev, "Cannot allocate memory %s %d\n", 1504 __func__, __LINE__); 1505 return (ENOMEM); 1506 } 1507 1508 /* 1509 * Get IOC Facts and allocate all structures based on this information. 1510 * A Diag Reset will also call mps_iocfacts_allocate and re-read the IOC 1511 * Facts. If relevant values have changed in IOC Facts, this function 1512 * will free all of the memory based on IOC Facts and reallocate that 1513 * memory. If this fails, any allocated memory should already be freed. 1514 */ 1515 if ((error = mps_iocfacts_allocate(sc, TRUE)) != 0) { 1516 mps_dprint(sc, MPS_FAULT, "%s IOC Facts based allocation " 1517 "failed with error %d\n", __func__, error); 1518 return (error); 1519 } 1520 1521 /* Start the periodic watchdog check on the IOC Doorbell */ 1522 mps_periodic(sc); 1523 1524 /* 1525 * The portenable will kick off discovery events that will drive the 1526 * rest of the initialization process. The CAM/SAS module will 1527 * hold up the boot sequence until discovery is complete. 1528 */ 1529 sc->mps_ich.ich_func = mps_startup; 1530 sc->mps_ich.ich_arg = sc; 1531 if (config_intrhook_establish(&sc->mps_ich) != 0) { 1532 mps_dprint(sc, MPS_ERROR, "Cannot establish MPS config hook\n"); 1533 error = EINVAL; 1534 } 1535 1536 /* 1537 * Allow IR to shutdown gracefully when shutdown occurs. 1538 */ 1539 sc->shutdown_eh = EVENTHANDLER_REGISTER(shutdown_final, 1540 mpssas_ir_shutdown, sc, SHUTDOWN_PRI_DEFAULT); 1541 1542 if (sc->shutdown_eh == NULL) 1543 mps_dprint(sc, MPS_ERROR, "shutdown event registration " 1544 "failed\n"); 1545 1546 mps_setup_sysctl(sc); 1547 1548 sc->mps_flags |= MPS_FLAGS_ATTACH_DONE; 1549 1550 return (error); 1551 } 1552 1553 /* Run through any late-start handlers. */ 1554 static void 1555 mps_startup(void *arg) 1556 { 1557 struct mps_softc *sc; 1558 1559 sc = (struct mps_softc *)arg; 1560 1561 mps_lock(sc); 1562 mps_unmask_intr(sc); 1563 1564 /* initialize device mapping tables */ 1565 mps_base_static_config_pages(sc); 1566 mps_mapping_initialize(sc); 1567 mpssas_startup(sc); 1568 mps_unlock(sc); 1569 } 1570 1571 /* Periodic watchdog. Is called with the driver lock already held. */ 1572 static void 1573 mps_periodic(void *arg) 1574 { 1575 struct mps_softc *sc; 1576 uint32_t db; 1577 1578 sc = (struct mps_softc *)arg; 1579 if (sc->mps_flags & MPS_FLAGS_SHUTDOWN) 1580 return; 1581 1582 db = mps_regread(sc, MPI2_DOORBELL_OFFSET); 1583 if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { 1584 mps_dprint(sc, MPS_FAULT, "IOC Fault 0x%08x, Resetting\n", db); 1585 mps_reinit(sc); 1586 } 1587 1588 callout_reset(&sc->periodic, MPS_PERIODIC_DELAY * hz, mps_periodic, sc); 1589 } 1590 1591 static void 1592 mps_log_evt_handler(struct mps_softc *sc, uintptr_t data, 1593 MPI2_EVENT_NOTIFICATION_REPLY *event) 1594 { 1595 MPI2_EVENT_DATA_LOG_ENTRY_ADDED *entry; 1596 1597 mps_print_event(sc, event); 1598 1599 switch (event->Event) { 1600 case MPI2_EVENT_LOG_DATA: 1601 mps_dprint(sc, MPS_EVENT, "MPI2_EVENT_LOG_DATA:\n"); 1602 if (sc->mps_debug & MPS_EVENT) 1603 hexdump(event->EventData, event->EventDataLength, NULL, 0); 1604 break; 1605 case MPI2_EVENT_LOG_ENTRY_ADDED: 1606 entry = (MPI2_EVENT_DATA_LOG_ENTRY_ADDED *)event->EventData; 1607 mps_dprint(sc, MPS_EVENT, "MPI2_EVENT_LOG_ENTRY_ADDED event " 1608 "0x%x Sequence %d:\n", entry->LogEntryQualifier, 1609 entry->LogSequence); 1610 break; 1611 default: 1612 break; 1613 } 1614 return; 1615 } 1616 1617 static int 1618 mps_attach_log(struct mps_softc *sc) 1619 { 1620 u32 events[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 1621 1622 bzero(events, 16); 1623 setbit(events, MPI2_EVENT_LOG_DATA); 1624 setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED); 1625 1626 mps_register_events(sc, events, mps_log_evt_handler, NULL, 1627 &sc->mps_log_eh); 1628 1629 return (0); 1630 } 1631 1632 static int 1633 mps_detach_log(struct mps_softc *sc) 1634 { 1635 1636 if (sc->mps_log_eh != NULL) 1637 mps_deregister_events(sc, sc->mps_log_eh); 1638 return (0); 1639 } 1640 1641 /* 1642 * Free all of the driver resources and detach submodules. Should be called 1643 * without the lock held. 1644 */ 1645 int 1646 mps_free(struct mps_softc *sc) 1647 { 1648 int error; 1649 1650 /* Turn off the watchdog */ 1651 mps_lock(sc); 1652 sc->mps_flags |= MPS_FLAGS_SHUTDOWN; 1653 mps_unlock(sc); 1654 /* Lock must not be held for this */ 1655 callout_drain(&sc->periodic); 1656 1657 if (((error = mps_detach_log(sc)) != 0) || 1658 ((error = mps_detach_sas(sc)) != 0)) 1659 return (error); 1660 1661 mps_detach_user(sc); 1662 1663 /* Put the IOC back in the READY state. */ 1664 mps_lock(sc); 1665 if ((error = mps_transition_ready(sc)) != 0) { 1666 mps_unlock(sc); 1667 return (error); 1668 } 1669 mps_unlock(sc); 1670 1671 if (sc->facts != NULL) 1672 free(sc->facts, M_MPT2); 1673 1674 /* 1675 * Free all buffers that are based on IOC Facts. A Diag Reset may need 1676 * to free these buffers too. 1677 */ 1678 mps_iocfacts_free(sc); 1679 1680 if (sc->sysctl_tree != NULL) 1681 sysctl_ctx_free(&sc->sysctl_ctx); 1682 1683 /* Deregister the shutdown function */ 1684 if (sc->shutdown_eh != NULL) 1685 EVENTHANDLER_DEREGISTER(shutdown_final, sc->shutdown_eh); 1686 1687 mtx_destroy(&sc->mps_mtx); 1688 1689 return (0); 1690 } 1691 1692 static __inline void 1693 mps_complete_command(struct mps_softc *sc, struct mps_command *cm) 1694 { 1695 MPS_FUNCTRACE(sc); 1696 1697 if (cm == NULL) { 1698 mps_dprint(sc, MPS_ERROR, "Completing NULL command\n"); 1699 return; 1700 } 1701 1702 if (cm->cm_flags & MPS_CM_FLAGS_POLLED) 1703 cm->cm_flags |= MPS_CM_FLAGS_COMPLETE; 1704 1705 if (cm->cm_complete != NULL) { 1706 mps_dprint(sc, MPS_TRACE, 1707 "%s cm %p calling cm_complete %p data %p reply %p\n", 1708 __func__, cm, cm->cm_complete, cm->cm_complete_data, 1709 cm->cm_reply); 1710 cm->cm_complete(sc, cm); 1711 } 1712 1713 if (cm->cm_flags & MPS_CM_FLAGS_WAKEUP) { 1714 mps_dprint(sc, MPS_TRACE, "waking up %p\n", cm); 1715 wakeup(cm); 1716 } 1717 1718 if (cm->cm_sc->io_cmds_active != 0) { 1719 cm->cm_sc->io_cmds_active--; 1720 } else { 1721 mps_dprint(sc, MPS_ERROR, "Warning: io_cmds_active is " 1722 "out of sync - resynching to 0\n"); 1723 } 1724 } 1725 1726 1727 static void 1728 mps_sas_log_info(struct mps_softc *sc , u32 log_info) 1729 { 1730 union loginfo_type { 1731 u32 loginfo; 1732 struct { 1733 u32 subcode:16; 1734 u32 code:8; 1735 u32 originator:4; 1736 u32 bus_type:4; 1737 } dw; 1738 }; 1739 union loginfo_type sas_loginfo; 1740 char *originator_str = NULL; 1741 1742 sas_loginfo.loginfo = log_info; 1743 if (sas_loginfo.dw.bus_type != 3 /*SAS*/) 1744 return; 1745 1746 /* each nexus loss loginfo */ 1747 if (log_info == 0x31170000) 1748 return; 1749 1750 /* eat the loginfos associated with task aborts */ 1751 if ((log_info == 30050000 || log_info == 1752 0x31140000 || log_info == 0x31130000)) 1753 return; 1754 1755 switch (sas_loginfo.dw.originator) { 1756 case 0: 1757 originator_str = "IOP"; 1758 break; 1759 case 1: 1760 originator_str = "PL"; 1761 break; 1762 case 2: 1763 originator_str = "IR"; 1764 break; 1765 } 1766 1767 mps_dprint(sc, MPS_LOG, "log_info(0x%08x): originator(%s), " 1768 "code(0x%02x), sub_code(0x%04x)\n", log_info, 1769 originator_str, sas_loginfo.dw.code, 1770 sas_loginfo.dw.subcode); 1771 } 1772 1773 static void 1774 mps_display_reply_info(struct mps_softc *sc, uint8_t *reply) 1775 { 1776 MPI2DefaultReply_t *mpi_reply; 1777 u16 sc_status; 1778 1779 mpi_reply = (MPI2DefaultReply_t*)reply; 1780 sc_status = le16toh(mpi_reply->IOCStatus); 1781 if (sc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) 1782 mps_sas_log_info(sc, le32toh(mpi_reply->IOCLogInfo)); 1783 } 1784 void 1785 mps_intr(void *data) 1786 { 1787 struct mps_softc *sc; 1788 uint32_t status; 1789 1790 sc = (struct mps_softc *)data; 1791 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1792 1793 /* 1794 * Check interrupt status register to flush the bus. This is 1795 * needed for both INTx interrupts and driver-driven polling 1796 */ 1797 status = mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); 1798 if ((status & MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT) == 0) 1799 return; 1800 1801 mps_lock(sc); 1802 mps_intr_locked(data); 1803 mps_unlock(sc); 1804 return; 1805 } 1806 1807 /* 1808 * In theory, MSI/MSIX interrupts shouldn't need to read any registers on the 1809 * chip. Hopefully this theory is correct. 1810 */ 1811 void 1812 mps_intr_msi(void *data) 1813 { 1814 struct mps_softc *sc; 1815 1816 sc = (struct mps_softc *)data; 1817 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 1818 mps_lock(sc); 1819 mps_intr_locked(data); 1820 mps_unlock(sc); 1821 return; 1822 } 1823 1824 /* 1825 * The locking is overly broad and simplistic, but easy to deal with for now. 1826 */ 1827 void 1828 mps_intr_locked(void *data) 1829 { 1830 MPI2_REPLY_DESCRIPTORS_UNION *desc; 1831 struct mps_softc *sc; 1832 struct mps_command *cm = NULL; 1833 uint8_t flags; 1834 u_int pq; 1835 MPI2_DIAG_RELEASE_REPLY *rel_rep; 1836 mps_fw_diagnostic_buffer_t *pBuffer; 1837 1838 sc = (struct mps_softc *)data; 1839 1840 pq = sc->replypostindex; 1841 mps_dprint(sc, MPS_TRACE, 1842 "%s sc %p starting with replypostindex %u\n", 1843 __func__, sc, sc->replypostindex); 1844 1845 for ( ;; ) { 1846 cm = NULL; 1847 desc = &sc->post_queue[sc->replypostindex]; 1848 flags = desc->Default.ReplyFlags & 1849 MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; 1850 if ((flags == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) 1851 || (le32toh(desc->Words.High) == 0xffffffff)) 1852 break; 1853 1854 /* increment the replypostindex now, so that event handlers 1855 * and cm completion handlers which decide to do a diag 1856 * reset can zero it without it getting incremented again 1857 * afterwards, and we break out of this loop on the next 1858 * iteration since the reply post queue has been cleared to 1859 * 0xFF and all descriptors look unused (which they are). 1860 */ 1861 if (++sc->replypostindex >= sc->pqdepth) 1862 sc->replypostindex = 0; 1863 1864 switch (flags) { 1865 case MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS: 1866 cm = &sc->commands[le16toh(desc->SCSIIOSuccess.SMID)]; 1867 cm->cm_reply = NULL; 1868 break; 1869 case MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY: 1870 { 1871 uint32_t baddr; 1872 uint8_t *reply; 1873 1874 /* 1875 * Re-compose the reply address from the address 1876 * sent back from the chip. The ReplyFrameAddress 1877 * is the lower 32 bits of the physical address of 1878 * particular reply frame. Convert that address to 1879 * host format, and then use that to provide the 1880 * offset against the virtual address base 1881 * (sc->reply_frames). 1882 */ 1883 baddr = le32toh(desc->AddressReply.ReplyFrameAddress); 1884 reply = sc->reply_frames + 1885 (baddr - ((uint32_t)sc->reply_busaddr)); 1886 /* 1887 * Make sure the reply we got back is in a valid 1888 * range. If not, go ahead and panic here, since 1889 * we'll probably panic as soon as we deference the 1890 * reply pointer anyway. 1891 */ 1892 if ((reply < sc->reply_frames) 1893 || (reply > (sc->reply_frames + 1894 (sc->fqdepth * sc->facts->ReplyFrameSize * 4)))) { 1895 printf("%s: WARNING: reply %p out of range!\n", 1896 __func__, reply); 1897 printf("%s: reply_frames %p, fqdepth %d, " 1898 "frame size %d\n", __func__, 1899 sc->reply_frames, sc->fqdepth, 1900 sc->facts->ReplyFrameSize * 4); 1901 printf("%s: baddr %#x,\n", __func__, baddr); 1902 /* LSI-TODO. See Linux Code. Need Gracefull exit*/ 1903 panic("Reply address out of range"); 1904 } 1905 if (le16toh(desc->AddressReply.SMID) == 0) { 1906 if (((MPI2_DEFAULT_REPLY *)reply)->Function == 1907 MPI2_FUNCTION_DIAG_BUFFER_POST) { 1908 /* 1909 * If SMID is 0 for Diag Buffer Post, 1910 * this implies that the reply is due to 1911 * a release function with a status that 1912 * the buffer has been released. Set 1913 * the buffer flags accordingly. 1914 */ 1915 rel_rep = 1916 (MPI2_DIAG_RELEASE_REPLY *)reply; 1917 if (le16toh(rel_rep->IOCStatus) == 1918 MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED) 1919 { 1920 pBuffer = 1921 &sc->fw_diag_buffer_list[ 1922 rel_rep->BufferType]; 1923 pBuffer->valid_data = TRUE; 1924 pBuffer->owned_by_firmware = 1925 FALSE; 1926 pBuffer->immediate = FALSE; 1927 } 1928 } else 1929 mps_dispatch_event(sc, baddr, 1930 (MPI2_EVENT_NOTIFICATION_REPLY *) 1931 reply); 1932 } else { 1933 cm = &sc->commands[le16toh(desc->AddressReply.SMID)]; 1934 cm->cm_reply = reply; 1935 cm->cm_reply_data = 1936 le32toh(desc->AddressReply.ReplyFrameAddress); 1937 } 1938 break; 1939 } 1940 case MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS: 1941 case MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER: 1942 case MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS: 1943 default: 1944 /* Unhandled */ 1945 mps_dprint(sc, MPS_ERROR, "Unhandled reply 0x%x\n", 1946 desc->Default.ReplyFlags); 1947 cm = NULL; 1948 break; 1949 } 1950 1951 1952 if (cm != NULL) { 1953 // Print Error reply frame 1954 if (cm->cm_reply) 1955 mps_display_reply_info(sc,cm->cm_reply); 1956 mps_complete_command(sc, cm); 1957 } 1958 1959 desc->Words.Low = 0xffffffff; 1960 desc->Words.High = 0xffffffff; 1961 } 1962 1963 if (pq != sc->replypostindex) { 1964 mps_dprint(sc, MPS_TRACE, 1965 "%s sc %p writing postindex %d\n", 1966 __func__, sc, sc->replypostindex); 1967 mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, sc->replypostindex); 1968 } 1969 1970 return; 1971 } 1972 1973 static void 1974 mps_dispatch_event(struct mps_softc *sc, uintptr_t data, 1975 MPI2_EVENT_NOTIFICATION_REPLY *reply) 1976 { 1977 struct mps_event_handle *eh; 1978 int event, handled = 0; 1979 1980 event = le16toh(reply->Event); 1981 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 1982 if (isset(eh->mask, event)) { 1983 eh->callback(sc, data, reply); 1984 handled++; 1985 } 1986 } 1987 1988 if (handled == 0) 1989 mps_dprint(sc, MPS_EVENT, "Unhandled event 0x%x\n", le16toh(event)); 1990 1991 /* 1992 * This is the only place that the event/reply should be freed. 1993 * Anything wanting to hold onto the event data should have 1994 * already copied it into their own storage. 1995 */ 1996 mps_free_reply(sc, data); 1997 } 1998 1999 static void 2000 mps_reregister_events_complete(struct mps_softc *sc, struct mps_command *cm) 2001 { 2002 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 2003 2004 if (cm->cm_reply) 2005 mps_print_event(sc, 2006 (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply); 2007 2008 mps_free_command(sc, cm); 2009 2010 /* next, send a port enable */ 2011 mpssas_startup(sc); 2012 } 2013 2014 /* 2015 * For both register_events and update_events, the caller supplies a bitmap 2016 * of events that it _wants_. These functions then turn that into a bitmask 2017 * suitable for the controller. 2018 */ 2019 int 2020 mps_register_events(struct mps_softc *sc, u32 *mask, 2021 mps_evt_callback_t *cb, void *data, struct mps_event_handle **handle) 2022 { 2023 struct mps_event_handle *eh; 2024 int error = 0; 2025 2026 eh = malloc(sizeof(struct mps_event_handle), M_MPT2, M_WAITOK|M_ZERO); 2027 if(!eh) { 2028 device_printf(sc->mps_dev, "Cannot allocate memory %s %d\n", 2029 __func__, __LINE__); 2030 return (ENOMEM); 2031 } 2032 eh->callback = cb; 2033 eh->data = data; 2034 TAILQ_INSERT_TAIL(&sc->event_list, eh, eh_list); 2035 if (mask != NULL) 2036 error = mps_update_events(sc, eh, mask); 2037 *handle = eh; 2038 2039 return (error); 2040 } 2041 2042 int 2043 mps_update_events(struct mps_softc *sc, struct mps_event_handle *handle, 2044 u32 *mask) 2045 { 2046 MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; 2047 MPI2_EVENT_NOTIFICATION_REPLY *reply; 2048 struct mps_command *cm; 2049 int error, i; 2050 2051 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 2052 2053 if ((mask != NULL) && (handle != NULL)) 2054 bcopy(mask, &handle->mask[0], sizeof(u32) * 2055 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS); 2056 2057 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 2058 sc->event_mask[i] = -1; 2059 2060 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 2061 sc->event_mask[i] &= ~handle->mask[i]; 2062 2063 2064 if ((cm = mps_alloc_command(sc)) == NULL) 2065 return (EBUSY); 2066 evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; 2067 evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; 2068 evtreq->MsgFlags = 0; 2069 evtreq->SASBroadcastPrimitiveMasks = 0; 2070 #ifdef MPS_DEBUG_ALL_EVENTS 2071 { 2072 u_char fullmask[16]; 2073 memset(fullmask, 0x00, 16); 2074 bcopy(fullmask, &evtreq->EventMasks[0], sizeof(u32) * 2075 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS); 2076 } 2077 #else 2078 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 2079 evtreq->EventMasks[i] = 2080 htole32(sc->event_mask[i]); 2081 #endif 2082 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 2083 cm->cm_data = NULL; 2084 2085 error = mps_wait_command(sc, cm, 60, 0); 2086 reply = (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply; 2087 if ((reply == NULL) || 2088 (reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) 2089 error = ENXIO; 2090 mps_print_event(sc, reply); 2091 mps_dprint(sc, MPS_TRACE, "%s finished error %d\n", __func__, error); 2092 2093 mps_free_command(sc, cm); 2094 return (error); 2095 } 2096 2097 static int 2098 mps_reregister_events(struct mps_softc *sc) 2099 { 2100 MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; 2101 struct mps_command *cm; 2102 struct mps_event_handle *eh; 2103 int error, i; 2104 2105 mps_dprint(sc, MPS_TRACE, "%s\n", __func__); 2106 2107 /* first, reregister events */ 2108 2109 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 2110 sc->event_mask[i] = -1; 2111 2112 TAILQ_FOREACH(eh, &sc->event_list, eh_list) { 2113 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 2114 sc->event_mask[i] &= ~eh->mask[i]; 2115 } 2116 2117 if ((cm = mps_alloc_command(sc)) == NULL) 2118 return (EBUSY); 2119 evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; 2120 evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; 2121 evtreq->MsgFlags = 0; 2122 evtreq->SASBroadcastPrimitiveMasks = 0; 2123 #ifdef MPS_DEBUG_ALL_EVENTS 2124 { 2125 u_char fullmask[16]; 2126 memset(fullmask, 0x00, 16); 2127 bcopy(fullmask, &evtreq->EventMasks[0], sizeof(u32) * 2128 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS); 2129 } 2130 #else 2131 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 2132 evtreq->EventMasks[i] = 2133 htole32(sc->event_mask[i]); 2134 #endif 2135 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 2136 cm->cm_data = NULL; 2137 cm->cm_complete = mps_reregister_events_complete; 2138 2139 error = mps_map_command(sc, cm); 2140 2141 mps_dprint(sc, MPS_TRACE, "%s finished with error %d\n", __func__, 2142 error); 2143 return (error); 2144 } 2145 2146 void 2147 mps_deregister_events(struct mps_softc *sc, struct mps_event_handle *handle) 2148 { 2149 2150 TAILQ_REMOVE(&sc->event_list, handle, eh_list); 2151 free(handle, M_MPT2); 2152 } 2153 2154 /* 2155 * Add a chain element as the next SGE for the specified command. 2156 * Reset cm_sge and cm_sgesize to indicate all the available space. 2157 */ 2158 static int 2159 mps_add_chain(struct mps_command *cm) 2160 { 2161 MPI2_SGE_CHAIN32 *sgc; 2162 struct mps_chain *chain; 2163 int space; 2164 2165 if (cm->cm_sglsize < MPS_SGC_SIZE) 2166 panic("MPS: Need SGE Error Code\n"); 2167 2168 chain = mps_alloc_chain(cm->cm_sc); 2169 if (chain == NULL) 2170 return (ENOBUFS); 2171 2172 space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4; 2173 2174 /* 2175 * Note: a double-linked list is used to make it easier to 2176 * walk for debugging. 2177 */ 2178 TAILQ_INSERT_TAIL(&cm->cm_chain_list, chain, chain_link); 2179 2180 sgc = (MPI2_SGE_CHAIN32 *)&cm->cm_sge->MpiChain; 2181 sgc->Length = htole16(space); 2182 sgc->NextChainOffset = 0; 2183 /* TODO Looks like bug in Setting sgc->Flags. 2184 * sgc->Flags = ( MPI2_SGE_FLAGS_CHAIN_ELEMENT | MPI2_SGE_FLAGS_64_BIT_ADDRESSING | 2185 * MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT 2186 * This is fine.. because we are not using simple element. In case of 2187 * MPI2_SGE_CHAIN32, we have seperate Length and Flags feild. 2188 */ 2189 sgc->Flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT; 2190 sgc->Address = htole32(chain->chain_busaddr); 2191 2192 cm->cm_sge = (MPI2_SGE_IO_UNION *)&chain->chain->MpiSimple; 2193 cm->cm_sglsize = space; 2194 return (0); 2195 } 2196 2197 /* 2198 * Add one scatter-gather element (chain, simple, transaction context) 2199 * to the scatter-gather list for a command. Maintain cm_sglsize and 2200 * cm_sge as the remaining size and pointer to the next SGE to fill 2201 * in, respectively. 2202 */ 2203 int 2204 mps_push_sge(struct mps_command *cm, void *sgep, size_t len, int segsleft) 2205 { 2206 MPI2_SGE_TRANSACTION_UNION *tc = sgep; 2207 MPI2_SGE_SIMPLE64 *sge = sgep; 2208 int error, type; 2209 uint32_t saved_buf_len, saved_address_low, saved_address_high; 2210 2211 type = (tc->Flags & MPI2_SGE_FLAGS_ELEMENT_MASK); 2212 2213 #ifdef INVARIANTS 2214 switch (type) { 2215 case MPI2_SGE_FLAGS_TRANSACTION_ELEMENT: { 2216 if (len != tc->DetailsLength + 4) 2217 panic("TC %p length %u or %zu?", tc, 2218 tc->DetailsLength + 4, len); 2219 } 2220 break; 2221 case MPI2_SGE_FLAGS_CHAIN_ELEMENT: 2222 /* Driver only uses 32-bit chain elements */ 2223 if (len != MPS_SGC_SIZE) 2224 panic("CHAIN %p length %u or %zu?", sgep, 2225 MPS_SGC_SIZE, len); 2226 break; 2227 case MPI2_SGE_FLAGS_SIMPLE_ELEMENT: 2228 /* Driver only uses 64-bit SGE simple elements */ 2229 if (len != MPS_SGE64_SIZE) 2230 panic("SGE simple %p length %u or %zu?", sge, 2231 MPS_SGE64_SIZE, len); 2232 if (((le32toh(sge->FlagsLength) >> MPI2_SGE_FLAGS_SHIFT) & 2233 MPI2_SGE_FLAGS_ADDRESS_SIZE) == 0) 2234 panic("SGE simple %p not marked 64-bit?", sge); 2235 2236 break; 2237 default: 2238 panic("Unexpected SGE %p, flags %02x", tc, tc->Flags); 2239 } 2240 #endif 2241 2242 /* 2243 * case 1: 1 more segment, enough room for it 2244 * case 2: 2 more segments, enough room for both 2245 * case 3: >=2 more segments, only enough room for 1 and a chain 2246 * case 4: >=1 more segment, enough room for only a chain 2247 * case 5: >=1 more segment, no room for anything (error) 2248 */ 2249 2250 /* 2251 * There should be room for at least a chain element, or this 2252 * code is buggy. Case (5). 2253 */ 2254 if (cm->cm_sglsize < MPS_SGC_SIZE) 2255 panic("MPS: Need SGE Error Code\n"); 2256 2257 if (segsleft >= 2 && 2258 cm->cm_sglsize < len + MPS_SGC_SIZE + MPS_SGE64_SIZE) { 2259 /* 2260 * There are 2 or more segments left to add, and only 2261 * enough room for 1 and a chain. Case (3). 2262 * 2263 * Mark as last element in this chain if necessary. 2264 */ 2265 if (type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) { 2266 sge->FlagsLength |= htole32( 2267 MPI2_SGE_FLAGS_LAST_ELEMENT << MPI2_SGE_FLAGS_SHIFT); 2268 } 2269 2270 /* 2271 * Add the item then a chain. Do the chain now, 2272 * rather than on the next iteration, to simplify 2273 * understanding the code. 2274 */ 2275 cm->cm_sglsize -= len; 2276 bcopy(sgep, cm->cm_sge, len); 2277 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); 2278 return (mps_add_chain(cm)); 2279 } 2280 2281 if (segsleft >= 1 && cm->cm_sglsize < len + MPS_SGC_SIZE) { 2282 /* 2283 * 1 or more segment, enough room for only a chain. 2284 * Hope the previous element wasn't a Simple entry 2285 * that needed to be marked with 2286 * MPI2_SGE_FLAGS_LAST_ELEMENT. Case (4). 2287 */ 2288 if ((error = mps_add_chain(cm)) != 0) 2289 return (error); 2290 } 2291 2292 #ifdef INVARIANTS 2293 /* Case 1: 1 more segment, enough room for it. */ 2294 if (segsleft == 1 && cm->cm_sglsize < len) 2295 panic("1 seg left and no room? %u versus %zu", 2296 cm->cm_sglsize, len); 2297 2298 /* Case 2: 2 more segments, enough room for both */ 2299 if (segsleft == 2 && cm->cm_sglsize < len + MPS_SGE64_SIZE) 2300 panic("2 segs left and no room? %u versus %zu", 2301 cm->cm_sglsize, len); 2302 #endif 2303 2304 if (segsleft == 1 && type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) { 2305 /* 2306 * If this is a bi-directional request, need to account for that 2307 * here. Save the pre-filled sge values. These will be used 2308 * either for the 2nd SGL or for a single direction SGL. If 2309 * cm_out_len is non-zero, this is a bi-directional request, so 2310 * fill in the OUT SGL first, then the IN SGL, otherwise just 2311 * fill in the IN SGL. Note that at this time, when filling in 2312 * 2 SGL's for a bi-directional request, they both use the same 2313 * DMA buffer (same cm command). 2314 */ 2315 saved_buf_len = le32toh(sge->FlagsLength) & 0x00FFFFFF; 2316 saved_address_low = sge->Address.Low; 2317 saved_address_high = sge->Address.High; 2318 if (cm->cm_out_len) { 2319 sge->FlagsLength = htole32(cm->cm_out_len | 2320 ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 2321 MPI2_SGE_FLAGS_END_OF_BUFFER | 2322 MPI2_SGE_FLAGS_HOST_TO_IOC | 2323 MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << 2324 MPI2_SGE_FLAGS_SHIFT)); 2325 cm->cm_sglsize -= len; 2326 bcopy(sgep, cm->cm_sge, len); 2327 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge 2328 + len); 2329 } 2330 saved_buf_len |= 2331 ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 2332 MPI2_SGE_FLAGS_END_OF_BUFFER | 2333 MPI2_SGE_FLAGS_LAST_ELEMENT | 2334 MPI2_SGE_FLAGS_END_OF_LIST | 2335 MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << 2336 MPI2_SGE_FLAGS_SHIFT); 2337 if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) { 2338 saved_buf_len |= 2339 ((uint32_t)(MPI2_SGE_FLAGS_IOC_TO_HOST) << 2340 MPI2_SGE_FLAGS_SHIFT); 2341 } else { 2342 saved_buf_len |= 2343 ((uint32_t)(MPI2_SGE_FLAGS_HOST_TO_IOC) << 2344 MPI2_SGE_FLAGS_SHIFT); 2345 } 2346 sge->FlagsLength = htole32(saved_buf_len); 2347 sge->Address.Low = saved_address_low; 2348 sge->Address.High = saved_address_high; 2349 } 2350 2351 cm->cm_sglsize -= len; 2352 bcopy(sgep, cm->cm_sge, len); 2353 cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); 2354 return (0); 2355 } 2356 2357 /* 2358 * Add one dma segment to the scatter-gather list for a command. 2359 */ 2360 int 2361 mps_add_dmaseg(struct mps_command *cm, vm_paddr_t pa, size_t len, u_int flags, 2362 int segsleft) 2363 { 2364 MPI2_SGE_SIMPLE64 sge; 2365 2366 /* 2367 * This driver always uses 64-bit address elements for simplicity. 2368 */ 2369 bzero(&sge, sizeof(sge)); 2370 flags |= MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 2371 MPI2_SGE_FLAGS_64_BIT_ADDRESSING; 2372 sge.FlagsLength = htole32(len | (flags << MPI2_SGE_FLAGS_SHIFT)); 2373 mps_from_u64(pa, &sge.Address); 2374 2375 return (mps_push_sge(cm, &sge, sizeof sge, segsleft)); 2376 } 2377 2378 static void 2379 mps_data_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 2380 { 2381 struct mps_softc *sc; 2382 struct mps_command *cm; 2383 u_int i, dir, sflags; 2384 2385 cm = (struct mps_command *)arg; 2386 sc = cm->cm_sc; 2387 2388 /* 2389 * In this case, just print out a warning and let the chip tell the 2390 * user they did the wrong thing. 2391 */ 2392 if ((cm->cm_max_segs != 0) && (nsegs > cm->cm_max_segs)) { 2393 mps_dprint(sc, MPS_ERROR, 2394 "%s: warning: busdma returned %d segments, " 2395 "more than the %d allowed\n", __func__, nsegs, 2396 cm->cm_max_segs); 2397 } 2398 2399 /* 2400 * Set up DMA direction flags. Bi-directional requests are also handled 2401 * here. In that case, both direction flags will be set. 2402 */ 2403 sflags = 0; 2404 if (cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) { 2405 /* 2406 * We have to add a special case for SMP passthrough, there 2407 * is no easy way to generically handle it. The first 2408 * S/G element is used for the command (therefore the 2409 * direction bit needs to be set). The second one is used 2410 * for the reply. We'll leave it to the caller to make 2411 * sure we only have two buffers. 2412 */ 2413 /* 2414 * Even though the busdma man page says it doesn't make 2415 * sense to have both direction flags, it does in this case. 2416 * We have one s/g element being accessed in each direction. 2417 */ 2418 dir = BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD; 2419 2420 /* 2421 * Set the direction flag on the first buffer in the SMP 2422 * passthrough request. We'll clear it for the second one. 2423 */ 2424 sflags |= MPI2_SGE_FLAGS_DIRECTION | 2425 MPI2_SGE_FLAGS_END_OF_BUFFER; 2426 } else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT) { 2427 sflags |= MPI2_SGE_FLAGS_HOST_TO_IOC; 2428 dir = BUS_DMASYNC_PREWRITE; 2429 } else 2430 dir = BUS_DMASYNC_PREREAD; 2431 2432 for (i = 0; i < nsegs; i++) { 2433 if ((cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) && (i != 0)) { 2434 sflags &= ~MPI2_SGE_FLAGS_DIRECTION; 2435 } 2436 error = mps_add_dmaseg(cm, segs[i].ds_addr, segs[i].ds_len, 2437 sflags, nsegs - i); 2438 if (error != 0) { 2439 /* Resource shortage, roll back! */ 2440 if (ratecheck(&sc->lastfail, &mps_chainfail_interval)) 2441 mps_dprint(sc, MPS_INFO, "Out of chain frames, " 2442 "consider increasing hw.mps.max_chains.\n"); 2443 cm->cm_flags |= MPS_CM_FLAGS_CHAIN_FAILED; 2444 mps_complete_command(sc, cm); 2445 return; 2446 } 2447 } 2448 2449 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir); 2450 mps_enqueue_request(sc, cm); 2451 2452 return; 2453 } 2454 2455 static void 2456 mps_data_cb2(void *arg, bus_dma_segment_t *segs, int nsegs, bus_size_t mapsize, 2457 int error) 2458 { 2459 mps_data_cb(arg, segs, nsegs, error); 2460 } 2461 2462 /* 2463 * This is the routine to enqueue commands ansynchronously. 2464 * Note that the only error path here is from bus_dmamap_load(), which can 2465 * return EINPROGRESS if it is waiting for resources. Other than this, it's 2466 * assumed that if you have a command in-hand, then you have enough credits 2467 * to use it. 2468 */ 2469 int 2470 mps_map_command(struct mps_softc *sc, struct mps_command *cm) 2471 { 2472 int error = 0; 2473 2474 if (cm->cm_flags & MPS_CM_FLAGS_USE_UIO) { 2475 error = bus_dmamap_load_uio(sc->buffer_dmat, cm->cm_dmamap, 2476 &cm->cm_uio, mps_data_cb2, cm, 0); 2477 } else if (cm->cm_flags & MPS_CM_FLAGS_USE_CCB) { 2478 error = bus_dmamap_load_ccb(sc->buffer_dmat, cm->cm_dmamap, 2479 cm->cm_data, mps_data_cb, cm, 0); 2480 } else if ((cm->cm_data != NULL) && (cm->cm_length != 0)) { 2481 error = bus_dmamap_load(sc->buffer_dmat, cm->cm_dmamap, 2482 cm->cm_data, cm->cm_length, mps_data_cb, cm, 0); 2483 } else { 2484 /* Add a zero-length element as needed */ 2485 if (cm->cm_sge != NULL) 2486 mps_add_dmaseg(cm, 0, 0, 0, 1); 2487 mps_enqueue_request(sc, cm); 2488 } 2489 2490 return (error); 2491 } 2492 2493 /* 2494 * This is the routine to enqueue commands synchronously. An error of 2495 * EINPROGRESS from mps_map_command() is ignored since the command will 2496 * be executed and enqueued automatically. Other errors come from msleep(). 2497 */ 2498 int 2499 mps_wait_command(struct mps_softc *sc, struct mps_command *cm, int timeout, 2500 int sleep_flag) 2501 { 2502 int error, rc; 2503 struct timeval cur_time, start_time; 2504 2505 if (sc->mps_flags & MPS_FLAGS_DIAGRESET) 2506 return EBUSY; 2507 2508 cm->cm_complete = NULL; 2509 cm->cm_flags |= MPS_CM_FLAGS_POLLED; 2510 error = mps_map_command(sc, cm); 2511 if ((error != 0) && (error != EINPROGRESS)) 2512 return (error); 2513 2514 /* 2515 * Check for context and wait for 50 mSec at a time until time has 2516 * expired or the command has finished. If msleep can't be used, need 2517 * to poll. 2518 */ 2519 if (curthread->td_no_sleeping != 0) 2520 sleep_flag = NO_SLEEP; 2521 getmicrotime(&start_time); 2522 if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) { 2523 cm->cm_flags |= MPS_CM_FLAGS_WAKEUP; 2524 error = msleep(cm, &sc->mps_mtx, 0, "mpswait", timeout*hz); 2525 } else { 2526 while ((cm->cm_flags & MPS_CM_FLAGS_COMPLETE) == 0) { 2527 mps_intr_locked(sc); 2528 if (sleep_flag == CAN_SLEEP) 2529 pause("mpswait", hz/20); 2530 else 2531 DELAY(50000); 2532 2533 getmicrotime(&cur_time); 2534 if ((cur_time.tv_sec - start_time.tv_sec) > timeout) { 2535 error = EWOULDBLOCK; 2536 break; 2537 } 2538 } 2539 } 2540 2541 if (error == EWOULDBLOCK) { 2542 mps_dprint(sc, MPS_FAULT, "Calling Reinit from %s\n", __func__); 2543 rc = mps_reinit(sc); 2544 mps_dprint(sc, MPS_FAULT, "Reinit %s\n", (rc == 0) ? "success" : 2545 "failed"); 2546 error = ETIMEDOUT; 2547 } 2548 return (error); 2549 } 2550 2551 /* 2552 * The MPT driver had a verbose interface for config pages. In this driver, 2553 * reduce it to much simplier terms, similar to the Linux driver. 2554 */ 2555 int 2556 mps_read_config_page(struct mps_softc *sc, struct mps_config_params *params) 2557 { 2558 MPI2_CONFIG_REQUEST *req; 2559 struct mps_command *cm; 2560 int error; 2561 2562 if (sc->mps_flags & MPS_FLAGS_BUSY) { 2563 return (EBUSY); 2564 } 2565 2566 cm = mps_alloc_command(sc); 2567 if (cm == NULL) { 2568 return (EBUSY); 2569 } 2570 2571 req = (MPI2_CONFIG_REQUEST *)cm->cm_req; 2572 req->Function = MPI2_FUNCTION_CONFIG; 2573 req->Action = params->action; 2574 req->SGLFlags = 0; 2575 req->ChainOffset = 0; 2576 req->PageAddress = params->page_address; 2577 if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) { 2578 MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr; 2579 2580 hdr = ¶ms->hdr.Ext; 2581 req->ExtPageType = hdr->ExtPageType; 2582 req->ExtPageLength = hdr->ExtPageLength; 2583 req->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; 2584 req->Header.PageLength = 0; /* Must be set to zero */ 2585 req->Header.PageNumber = hdr->PageNumber; 2586 req->Header.PageVersion = hdr->PageVersion; 2587 } else { 2588 MPI2_CONFIG_PAGE_HEADER *hdr; 2589 2590 hdr = ¶ms->hdr.Struct; 2591 req->Header.PageType = hdr->PageType; 2592 req->Header.PageNumber = hdr->PageNumber; 2593 req->Header.PageLength = hdr->PageLength; 2594 req->Header.PageVersion = hdr->PageVersion; 2595 } 2596 2597 cm->cm_data = params->buffer; 2598 cm->cm_length = params->length; 2599 if (cm->cm_data != NULL) { 2600 cm->cm_sge = &req->PageBufferSGE; 2601 cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); 2602 cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; 2603 } else 2604 cm->cm_sge = NULL; 2605 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 2606 2607 cm->cm_complete_data = params; 2608 if (params->callback != NULL) { 2609 cm->cm_complete = mps_config_complete; 2610 return (mps_map_command(sc, cm)); 2611 } else { 2612 error = mps_wait_command(sc, cm, 0, CAN_SLEEP); 2613 if (error) { 2614 mps_dprint(sc, MPS_FAULT, 2615 "Error %d reading config page\n", error); 2616 mps_free_command(sc, cm); 2617 return (error); 2618 } 2619 mps_config_complete(sc, cm); 2620 } 2621 2622 return (0); 2623 } 2624 2625 int 2626 mps_write_config_page(struct mps_softc *sc, struct mps_config_params *params) 2627 { 2628 return (EINVAL); 2629 } 2630 2631 static void 2632 mps_config_complete(struct mps_softc *sc, struct mps_command *cm) 2633 { 2634 MPI2_CONFIG_REPLY *reply; 2635 struct mps_config_params *params; 2636 2637 MPS_FUNCTRACE(sc); 2638 params = cm->cm_complete_data; 2639 2640 if (cm->cm_data != NULL) { 2641 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, 2642 BUS_DMASYNC_POSTREAD); 2643 bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap); 2644 } 2645 2646 /* 2647 * XXX KDM need to do more error recovery? This results in the 2648 * device in question not getting probed. 2649 */ 2650 if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) { 2651 params->status = MPI2_IOCSTATUS_BUSY; 2652 goto done; 2653 } 2654 2655 reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; 2656 if (reply == NULL) { 2657 params->status = MPI2_IOCSTATUS_BUSY; 2658 goto done; 2659 } 2660 params->status = reply->IOCStatus; 2661 if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) { 2662 params->hdr.Ext.ExtPageType = reply->ExtPageType; 2663 params->hdr.Ext.ExtPageLength = reply->ExtPageLength; 2664 params->hdr.Ext.PageType = reply->Header.PageType; 2665 params->hdr.Ext.PageNumber = reply->Header.PageNumber; 2666 params->hdr.Ext.PageVersion = reply->Header.PageVersion; 2667 } else { 2668 params->hdr.Struct.PageType = reply->Header.PageType; 2669 params->hdr.Struct.PageNumber = reply->Header.PageNumber; 2670 params->hdr.Struct.PageLength = reply->Header.PageLength; 2671 params->hdr.Struct.PageVersion = reply->Header.PageVersion; 2672 } 2673 2674 done: 2675 mps_free_command(sc, cm); 2676 if (params->callback != NULL) 2677 params->callback(sc, params); 2678 2679 return; 2680 } 2681