1 /* $FreeBSD$ */ 2 /* 3 * Copyright (c) 2000-2009 LSI Corporation. 4 * 5 * 6 * Name: mpi2_init.h 7 * Title: MPI SCSI initiator mode messages and structures 8 * Creation Date: June 23, 2006 9 * 10 * mpi2_init.h Version: 02.00.08 11 * 12 * Version History 13 * --------------- 14 * 15 * Date Version Description 16 * -------- -------- ------------------------------------------------------ 17 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 18 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. 19 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. 20 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. 21 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. 22 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. 23 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO 24 * Control field Task Attribute flags. 25 * Moved LUN field defines to mpi2.h becasue they are 26 * common to many structures. 27 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to 28 * Query Asynchronous Event. 29 * Defined two new bits in the SlotStatus field of the SCSI 30 * Enclosure Processor Request and Reply. 31 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for 32 * both SCSI IO Error Reply and SCSI Task Management Reply. 33 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. 34 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. 35 * -------------------------------------------------------------------------- 36 */ 37 38 #ifndef MPI2_INIT_H 39 #define MPI2_INIT_H 40 41 /***************************************************************************** 42 * 43 * SCSI Initiator Messages 44 * 45 *****************************************************************************/ 46 47 /**************************************************************************** 48 * SCSI IO messages and associated structures 49 ****************************************************************************/ 50 51 typedef struct 52 { 53 U8 CDB[20]; /* 0x00 */ 54 U32 PrimaryReferenceTag; /* 0x14 */ 55 U16 PrimaryApplicationTag; /* 0x18 */ 56 U16 PrimaryApplicationTagMask; /* 0x1A */ 57 U32 TransferLength; /* 0x1C */ 58 } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, 59 Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; 60 61 /* TBD: I don't think this is needed for MPI2/Gen2 */ 62 #if 0 63 typedef struct 64 { 65 U8 CDB[16]; /* 0x00 */ 66 U32 DataLength; /* 0x10 */ 67 U32 PrimaryReferenceTag; /* 0x14 */ 68 U16 PrimaryApplicationTag; /* 0x18 */ 69 U16 PrimaryApplicationTagMask; /* 0x1A */ 70 U32 TransferLength; /* 0x1C */ 71 } MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, 72 Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; 73 #endif 74 75 typedef union 76 { 77 U8 CDB32[32]; 78 MPI2_SCSI_IO_CDB_EEDP32 EEDP32; 79 MPI2_SGE_SIMPLE_UNION SGE; 80 } MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, 81 Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; 82 83 /* SCSI IO Request Message */ 84 typedef struct _MPI2_SCSI_IO_REQUEST 85 { 86 U16 DevHandle; /* 0x00 */ 87 U8 ChainOffset; /* 0x02 */ 88 U8 Function; /* 0x03 */ 89 U16 Reserved1; /* 0x04 */ 90 U8 Reserved2; /* 0x06 */ 91 U8 MsgFlags; /* 0x07 */ 92 U8 VP_ID; /* 0x08 */ 93 U8 VF_ID; /* 0x09 */ 94 U16 Reserved3; /* 0x0A */ 95 U32 SenseBufferLowAddress; /* 0x0C */ 96 U16 SGLFlags; /* 0x10 */ 97 U8 SenseBufferLength; /* 0x12 */ 98 U8 Reserved4; /* 0x13 */ 99 U8 SGLOffset0; /* 0x14 */ 100 U8 SGLOffset1; /* 0x15 */ 101 U8 SGLOffset2; /* 0x16 */ 102 U8 SGLOffset3; /* 0x17 */ 103 U32 SkipCount; /* 0x18 */ 104 U32 DataLength; /* 0x1C */ 105 U32 BidirectionalDataLength; /* 0x20 */ 106 U16 IoFlags; /* 0x24 */ 107 U16 EEDPFlags; /* 0x26 */ 108 U32 EEDPBlockSize; /* 0x28 */ 109 U32 SecondaryReferenceTag; /* 0x2C */ 110 U16 SecondaryApplicationTag; /* 0x30 */ 111 U16 ApplicationTagTranslationMask; /* 0x32 */ 112 U8 LUN[8]; /* 0x34 */ 113 U32 Control; /* 0x3C */ 114 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ 115 MPI2_SGE_IO_UNION SGL; /* 0x60 */ 116 } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, 117 Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; 118 119 /* SCSI IO MsgFlags bits */ 120 121 /* MsgFlags for SenseBufferAddressSpace */ 122 #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) 123 #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) 124 #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) 125 #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) 126 #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) 127 128 /* SCSI IO SGLFlags bits */ 129 130 /* base values for Data Location Address Space */ 131 #define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) 132 #define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) 133 #define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) 134 #define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) 135 #define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) 136 137 /* base values for Type */ 138 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) 139 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) 140 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) 141 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) 142 143 /* shift values for each sub-field */ 144 #define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) 145 #define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) 146 #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) 147 #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) 148 149 /* SCSI IO IoFlags bits */ 150 151 /* Large CDB Address Space */ 152 #define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) 153 #define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) 154 #define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) 155 #define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) 156 #define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) 157 158 #define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) 159 #define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) 160 #define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) 161 #define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) 162 #define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) 163 164 /* SCSI IO EEDPFlags bits */ 165 166 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 167 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 168 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 169 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 170 171 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) 172 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) 173 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) 174 175 #define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 176 177 #define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) 178 #define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) 179 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) 180 #define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) 181 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 182 #define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) 183 #define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) 184 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 185 186 /* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ 187 188 /* SCSI IO Control bits */ 189 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) 190 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) 191 192 #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) 193 #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) 194 #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) 195 #define MPI2_SCSIIO_CONTROL_READ (0x02000000) 196 #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) 197 198 #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) 199 #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) 200 201 #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) 202 #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) 203 #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) 204 #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) 205 #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) 206 207 #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) 208 #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) 209 #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) 210 #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) 211 212 213 /* SCSI IO Error Reply Message */ 214 typedef struct _MPI2_SCSI_IO_REPLY 215 { 216 U16 DevHandle; /* 0x00 */ 217 U8 MsgLength; /* 0x02 */ 218 U8 Function; /* 0x03 */ 219 U16 Reserved1; /* 0x04 */ 220 U8 Reserved2; /* 0x06 */ 221 U8 MsgFlags; /* 0x07 */ 222 U8 VP_ID; /* 0x08 */ 223 U8 VF_ID; /* 0x09 */ 224 U16 Reserved3; /* 0x0A */ 225 U8 SCSIStatus; /* 0x0C */ 226 U8 SCSIState; /* 0x0D */ 227 U16 IOCStatus; /* 0x0E */ 228 U32 IOCLogInfo; /* 0x10 */ 229 U32 TransferCount; /* 0x14 */ 230 U32 SenseCount; /* 0x18 */ 231 U32 ResponseInfo; /* 0x1C */ 232 U16 TaskTag; /* 0x20 */ 233 U16 Reserved4; /* 0x22 */ 234 U32 BidirectionalTransferCount; /* 0x24 */ 235 U32 Reserved5; /* 0x28 */ 236 U32 Reserved6; /* 0x2C */ 237 } MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, 238 Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; 239 240 /* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ 241 242 #define MPI2_SCSI_STATUS_GOOD (0x00) 243 #define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) 244 #define MPI2_SCSI_STATUS_CONDITION_MET (0x04) 245 #define MPI2_SCSI_STATUS_BUSY (0x08) 246 #define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) 247 #define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) 248 #define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) 249 #define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ 250 #define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) 251 #define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) 252 #define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) 253 254 /* SCSI IO Reply SCSIState flags */ 255 256 #define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) 257 #define MPI2_SCSI_STATE_TERMINATED (0x08) 258 #define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) 259 #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) 260 #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) 261 262 /* masks and shifts for the ResponseInfo field */ 263 264 #define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) 265 #define MPI2_SCSI_RI_SHIFT_REASONCODE (0) 266 267 #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) 268 269 270 /**************************************************************************** 271 * SCSI Task Management messages 272 ****************************************************************************/ 273 274 /* SCSI Task Management Request Message */ 275 typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST 276 { 277 U16 DevHandle; /* 0x00 */ 278 U8 ChainOffset; /* 0x02 */ 279 U8 Function; /* 0x03 */ 280 U8 Reserved1; /* 0x04 */ 281 U8 TaskType; /* 0x05 */ 282 U8 Reserved2; /* 0x06 */ 283 U8 MsgFlags; /* 0x07 */ 284 U8 VP_ID; /* 0x08 */ 285 U8 VF_ID; /* 0x09 */ 286 U16 Reserved3; /* 0x0A */ 287 U8 LUN[8]; /* 0x0C */ 288 U32 Reserved4[7]; /* 0x14 */ 289 U16 TaskMID; /* 0x30 */ 290 U16 Reserved5; /* 0x32 */ 291 } MPI2_SCSI_TASK_MANAGE_REQUEST, 292 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, 293 Mpi2SCSITaskManagementRequest_t, 294 MPI2_POINTER pMpi2SCSITaskManagementRequest_t; 295 296 /* TaskType values */ 297 298 #define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) 299 #define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) 300 #define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) 301 #define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) 302 #define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) 303 #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) 304 #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) 305 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) 306 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) 307 308 /* obsolete TaskType name */ 309 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) 310 311 /* MsgFlags bits */ 312 313 #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) 314 #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) 315 #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) 316 #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) 317 318 #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) 319 320 321 322 /* SCSI Task Management Reply Message */ 323 typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY 324 { 325 U16 DevHandle; /* 0x00 */ 326 U8 MsgLength; /* 0x02 */ 327 U8 Function; /* 0x03 */ 328 U8 ResponseCode; /* 0x04 */ 329 U8 TaskType; /* 0x05 */ 330 U8 Reserved1; /* 0x06 */ 331 U8 MsgFlags; /* 0x07 */ 332 U8 VP_ID; /* 0x08 */ 333 U8 VF_ID; /* 0x09 */ 334 U16 Reserved2; /* 0x0A */ 335 U16 Reserved3; /* 0x0C */ 336 U16 IOCStatus; /* 0x0E */ 337 U32 IOCLogInfo; /* 0x10 */ 338 U32 TerminationCount; /* 0x14 */ 339 U32 ResponseInfo; /* 0x18 */ 340 } MPI2_SCSI_TASK_MANAGE_REPLY, 341 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, 342 Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; 343 344 /* ResponseCode values */ 345 346 #define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) 347 #define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) 348 #define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) 349 #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) 350 #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) 351 #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) 352 #define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) 353 #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) 354 355 /* masks and shifts for the ResponseInfo field */ 356 357 #define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) 358 #define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) 359 #define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) 360 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) 361 #define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) 362 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) 363 #define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) 364 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) 365 366 367 /**************************************************************************** 368 * SCSI Enclosure Processor messages 369 ****************************************************************************/ 370 371 /* SCSI Enclosure Processor Request Message */ 372 typedef struct _MPI2_SEP_REQUEST 373 { 374 U16 DevHandle; /* 0x00 */ 375 U8 ChainOffset; /* 0x02 */ 376 U8 Function; /* 0x03 */ 377 U8 Action; /* 0x04 */ 378 U8 Flags; /* 0x05 */ 379 U8 Reserved1; /* 0x06 */ 380 U8 MsgFlags; /* 0x07 */ 381 U8 VP_ID; /* 0x08 */ 382 U8 VF_ID; /* 0x09 */ 383 U16 Reserved2; /* 0x0A */ 384 U32 SlotStatus; /* 0x0C */ 385 U32 Reserved3; /* 0x10 */ 386 U32 Reserved4; /* 0x14 */ 387 U32 Reserved5; /* 0x18 */ 388 U16 Slot; /* 0x1C */ 389 U16 EnclosureHandle; /* 0x1E */ 390 } MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, 391 Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; 392 393 /* Action defines */ 394 #define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) 395 #define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) 396 397 /* Flags defines */ 398 #define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) 399 #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) 400 401 /* SlotStatus defines */ 402 #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) 403 #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 404 #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 405 #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) 406 #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) 407 #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 408 #define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 409 #define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 410 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) 411 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) 412 #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) 413 414 415 /* SCSI Enclosure Processor Reply Message */ 416 typedef struct _MPI2_SEP_REPLY 417 { 418 U16 DevHandle; /* 0x00 */ 419 U8 MsgLength; /* 0x02 */ 420 U8 Function; /* 0x03 */ 421 U8 Action; /* 0x04 */ 422 U8 Flags; /* 0x05 */ 423 U8 Reserved1; /* 0x06 */ 424 U8 MsgFlags; /* 0x07 */ 425 U8 VP_ID; /* 0x08 */ 426 U8 VF_ID; /* 0x09 */ 427 U16 Reserved2; /* 0x0A */ 428 U16 Reserved3; /* 0x0C */ 429 U16 IOCStatus; /* 0x0E */ 430 U32 IOCLogInfo; /* 0x10 */ 431 U32 SlotStatus; /* 0x14 */ 432 U32 Reserved4; /* 0x18 */ 433 U16 Slot; /* 0x1C */ 434 U16 EnclosureHandle; /* 0x1E */ 435 } MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, 436 Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; 437 438 /* SlotStatus defines */ 439 #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) 440 #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 441 #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 442 #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) 443 #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) 444 #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 445 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 446 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 447 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) 448 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) 449 #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) 450 451 452 #endif 453 454 455